www.DataSheet4U.

com

PS232S
Version : A.003
Issue Date : 2007/03/14
File Name : SP-PS232S-A.003.doc
Total Pages : 11

6-Channel Secondary Monitoring IC

新竹市科學園區展業一路 9 號 7 樓之 1
SILICON TOUCH TECHNOLOGY INC.
9-7F-1, Prosperity Road I, Science Based Industrial Park,
Hsin-Chu, Taiwan 300, R.O.C.
Tel：886-3-5645656 Fax：886-3-5645626
 www.DataSheet4U.com
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC. PS232S

PS232S
6-Channel Secondary Monitoring IC

General Description

PS232S is specially designed for switching power supply system. Four important
functions of PS232S are the followings: over-voltage protection, over-current protection,
under-voltage protection and power good signal generating.
OVP/UVP (Over-Voltage/Under-Voltage Protection) monitors 3.3V, 5V and quartic
12V to protect our power supply and PC, FPO/ goes to high when one of these supply
voltages exceeds their normal operation voltage range.
OCP (Over Current Protection) monitors IS33, IS5, IS12A, IS12B, IS12C, IS12D
input current sense. An adjustable over-current condition composed of Iref and
“protection current range resistor” helps users design OCP easily.
An additional protection input pin provides the flexibility for design protection
circuit.
Power good signal generating notifies personal computer when power supply is
ready or power supply is going to shutdown, therefore it can provide a reliable power
supply environment.

Features
• Over/Under-voltage protection and lock out
• Over-current protection and lock out
• Additional protection input
• Fault protection output with open drain output stage
• Open drain power good output signal for power good input
• Built-in 300mS power good delay
• AC on 75ms delay for UV/OC protection
• 38mS PSON/ control de-bounce
• Wide power supply range (3.8V~16V)
• Special care for AC power off

6-Channel Secondary Monitoring IC Version：A.002

-1-
 www.DataSheet4U.com
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC. PS232S

Block Diagram

VS delay FPO/
S Q
VS12A 155KΩ
73uS R
VS12B UV 1MΩ
Vref
VS12C 9KΩ delay
VS12D 38mS
OV De-bounce
Vref
H : 4mS
16KΩ L : 4.5uS
VCC
30KΩ

VCCI
2KΩ
PSON/
12 OV 1.25V

4.5V 90KΩ

12 UV

VS5 Pext
2.5V
58KΩ
5 UV

13.5KΩ Vref delay

1 1.13V
5 OV
H : 75mS 0
18.5KΩ Vref L : 4.5uS
PGI
0.63V
R
VS33 Q S
38.5KΩ
1.25V
3.3 UV

23.5KΩ Vref
VCCI
3.3 OV

28KΩ Vref 1MΩ

PGO
delay
73uS
De-bounce
VCCI H : 300mS
L : 4.5uS
VS Step Down
OC
IS12A IS to near 2.5V
delay
IS12B
Iref X 8
IS12C 1mS

IS12D
12 OC Power On Constant Current
delay POR RI
Reset Source Iref

VCCI
H : 20mS
Step Down L : 4.5uS
5 OC Internal
IS5 to near 2.5V VCCI = 4V
Power

Iref X 8 VCC VCC

VCCI
Band-Gap Vref Clock
Step Down CLK GND
3.3 OC Reference 1.25V Generator
IS33 to near 2.5V

Iref X 8

6-Channel Secondary Monitoring IC Version：A.002

-2-
 www.DataSheet4U.com
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC. PS232S

Timing Chart

Vcc

PSON/

FPO/

PGI

VS12A IS12A
VS12B IS12B
VS12C IS12C
VS12D IS12D
VS5 IS5
VS33 IS33
Pext

PGO

Td1 Tb1
Td3
Td2

AC UVP/OVP/OCP PSON/ PSON/ PSON/ AC

turn on Pext protect turn on turn off turn on turn off

VPGI 1.25V
1.13V
0.63V

Td1

Td2

OVP OVP/UVP/OCP OVP

6-Channel Secondary Monitoring IC Version：A.002

-3-
 www.DataSheet4U.com
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC. PS232S

Pin Descriptions

Pin No PIN NAME Descriptions

1 PGI Power good input signal pin
2 GND Ground
3 FPO/ Inverted fault protection output ,open drain output stage
4 PSON/ Remote ON/OFF control input pin
5 IS12A 12V(1) over current protection input pin
6 RI Current sense setting
7 IS12B 12V(2) over current protection input pin
8 VS12B 12V(2) over/under voltage protection input pin
9 VS12C 12V(3) over/under voltage protection input pin
10 VS12D 12V(4) over/under voltage protection input pin
11 IS12D 12V(4) over current protection input pin
12 IS12C 12V(3) over current protection input pin
13 Pext External protection detect input pin
14 IS5 5.0V over current protection input pin
15 IS33 3.3V over current protection input pin
16 VS12A 12V(1) over/under voltage protection input pin
17 VS33 3.3V over/under voltage protection input pin
18 VS5 5.0V over/under voltage protection input pin
19 VCC Power supply
20 PGO Power good output signal pin , open drain output stage

Absolute Maximum Ratings

Parameter Rating Unit

Storage Temperature (Tstg) -40 to +125 °C
Operating Temperature (Topr) -30 to +90 °C
Supply Voltage (VCC) VCC -0.5 to +16.0 V
VS12,IS12(A,B,C,D) -0.5 to +16.0 V
VS5, IS5 -0.5 to +9.0 V
Input Voltage Range (VI) VS33, IS33 -0.5 to +7.0 V
PGI -0.5 to +16.0 V
PSON/, Pext -0.5 to Vcc+0.5 V
FPO/ -0.5 to +16.0 V
Output Voltage Range (VO)
PGO -0.5 to Vcc+0.5 V
Output Current for RI (IRI) RI 12.5 to 62.5 uA

6-Channel Secondary Monitoring IC Version：A.002

-4-
 www.DataSheet4U.com
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC. PS232S

Electrical Characteristics, Vcc=12V, Ta = Full range. (unless otherwise specified)

Power Supply Section

Parameter Conditions MIN TYP MAX Unit
Supply Voltage 3.8 5.0 16.0 V
Supply Current VPSON/ = 5V 4.5 5.0 mA
Power On Reset Threshold Voltage (VPOR) 3.2 3.4 3.6 V
Power On Reset Hysteresis (VHYST) -0.15 -0.3 -0.45 V

Over-Voltage Section
Parameter Conditions MIN TYP MAX Unit
VS33 3.7 3.9 4.1 V
Over-Voltage Threshold VS5 5.7 6.1 6.5 V
VS12A/B/C/D 13.1 13.8 14.5 V

Under-Voltage Section
Parameter Conditions MIN TYP MAX Unit
VS33 2.0 2.2 2.4 V
Under-Voltage Threshold VS5 3.3 3.5 3.7 V
VS12A/B/C/D 8.5 9.0 9.5 V

PGI, Analog Input

Parameter Conditions MIN TYP MAX Unit
Threshold Voltage for start Td1 1.16 1.25 1.33 V
Threshold Voltage for start Td2 0.60 0.63 0.75 V
Threshold Voltage for mask OC,UV 1.05 1.13 1.21 V
Hysteresis (VHYST)* -20 -50 -80 mV
* All of the comparator for PGI input in block diagram.

6-Channel Secondary Monitoring IC Version：A.002

-5-
 www.DataSheet4U.com
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC. PS232S

Electrical Characteristics (Continued)

PGO, Open Drain Digital Output
Parameter Conditions MIN TYP MAX Unit
Leakage Current (ILKG) VPGO=5V 5 uA
Low Level Output Voltage (VOL) ISINK=10mA 0.3 V

FPO/, Open Drain Digital Output

Parameter Conditions MIN TYP MAX Unit
Leakage Current (ILKG) VFPO/=5V 5 uA
Low Level Output Voltage (VOL) ISINK=20mA 0.4 V

PSON/, Analog Input

Parameter Conditions MIN TYP MAX Unit
Threshold Voltage 1.16 1.25 1.33 V
Hysteresis (VHYST) 20 50 80 mV

External Protection Detect Section

Parameter Conditions MIN TYP MAX Unit
Threshold(VTH) 2.5 2.6 2.7 V
Hysteresis (VHYST) 20 50 80 mV

Switching Characteristics, Vcc=12V, Ta = Full range.

Parameter Conditions MIN TYP MAX Unit
PGI to PGO Delay Time (Td1) 200 300 480 mS
Short Circuit Delay Time (Td2) 49 75 114 mS
PGO to FPO/ Delay Time (Td3) 2 4 6 mS
Under Voltage Delay Time (Td4) 0.6 1 1.4 mS
Over Current Delay Time (Td5) 13 20 27 mS
Over Voltage Delay Time (Td6) 47 73 110 uS
Pext Delay Time (Td7) 24 38 52 mS
PSON/ De-bounce Time (Tb1) 24 38 52 mS
PGO Noise De-glitch Time (Tb2) 47 73 110 uS

6-Channel Secondary Monitoring IC Version：A.002

-6-
 www.DataSheet4U.com
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC. PS232S

Application

Typical 6 rails SPS

S.P.S. Secondary Side
RS5
+5V Output

RS33
+3.3V Coil +3.3V Output

RS12(1)
+12V(1) Coil +12V(1) Output

RS12(2)
+12V(2) Coil +12V(2) Output
RS12(3)
+12V(3) Coil +12V(3) Output
RS12(4)
+12V(4) Coil +12V(4) Output

ROC12(3)

ROC12(4)
ROC12(2)

ROC12(1)

ROC33

ROC5
= or

4.7K
RPGO
1 PGI PGO 20 PGO

2 GND Vcc 19 +5VSB

+5VSB 3 FPO/ VS5 18

1K
PSON 4 PSON/ VS33 17
0.1u
5 IS12A VS12A 16

6 RI IS33 15
0.1u
0.1u
7 IS12B IS5 14
0.1u
8 VS12B Pext 13 Pext
CPGI

RI

9 VS12C IS12C 12
10 VS12D IS12D 11

0.1u 0.1u
PS232S

Notes:
1. Zener diode or resistor or both of them can be used in component X.
2. The bypass capacitor Cby suggests to be 0.1uF~ 10uF and layout nearby pin VCC.
3. The recommend sense values of RS12(1), RS12(2), RS5 and RS33 are ≥ 0.002Ω.
4. Over-Current Protection design example:
1.25
= 62.5 K (Ω )
V
(1) I ref = 20 μA , RI = RI =
I RI 20μ
(2) RS5=0.002 Ω , ΔV5V = 0.002 × I +5V = ROC 5 × 8 × I ref
0.002 × 20
(3) If +5V OCP trip point is 20A, ROC 5 = = 250(Ω )
8 × 20 μ

6-Channel Secondary Monitoring IC Version：A.002

-7-
 www.DataSheet4U.com
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC. PS232S

Package Specification

( 20-pin DIP )

E1 E eB

θ°

A
Seating Plane

A1 L

b1 b e

Symbol Dimension in mm Dimension in inch NOTE

Min Normal Max Min Normal Max
A 5.33 0.210
A1 0.38 0.015
eB 7.29 8.41 9.53 0.287 0.331 0.375
b 1.52 0.06
b1 0.46 0.018
D 24.89 26.16 26.92 0.98 1.03 1.06
E1 6.01 6.30 6.55 0.238 0.248 0.258
e 2.18 2.54 2.90 0.086 0.100 0.114
E 7.62 0.3
L 2.54 3.81 0.100 0.150
θ° 0º 7º 15º 0º 7º 15º

6-Channel Secondary Monitoring IC Version：A.002

-8-
 www.DataSheet4U.com
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC. PS232S

Package Specification

( 20-pin SOP )

E H

0.020(inch) x45˚

A1
θ
b e
L
0.004

Dimension in mm Dimension in inch NOTE

Symbol
MIN. MAX. MIN. MAX.
A 2.36 2.64 0.093 0.104
A1 0.10 0.30 0.004 0.012
b 0.41 BSC 0.016 BSC
e 1.27 BSC 0.050 BSC
D 12.60 12.90 0.496 0.508
H 10.01 10.64 0.394 0.419
E 7.39 7.59 0.291 0.299
L 0.41 1.27 0.016 0.050
θ 0˚ 8˚ 0˚ 8˚

6-Channel Secondary Monitoring IC Version：A.002

-9-
 www.DataSheet4U.com
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC. PS232S

The products listed herein are designed for ordinary electronic applications, such as
electrical appliances, audio-visual equipment, communications devices and so on.
Hence, it is advisable that the devices should not be used in medical instruments,
surgical implants, aerospace machinery, nuclear power control systems,
disaster/crime-prevention equipment and the like. Misusing those products may
directly or indirectly endanger human life, or cause injury and property loss.

Silicon Touch Technology, Inc. will not take any responsibilities regarding the
misusage of the products mentioned above. Anyone who purchases any products
described herein with the above-mentioned intention or with such misused
applications should accept full responsibility and indemnify. Silicon Touch Technology,
Inc. and its distributors and all their officers and employees shall defend jointly and
severally against any and all claims and litigation and all damages, cost and
expenses associated with such intention and manipulation.

Silicon Touch Technology, Inc. reserve the right to make changes to their products or
to discontinue any product or service without notice, and advise customers to obtain
the latest version of relevant information to verify, before placing orders, that
information being relied on is current and complete.

6-Channel Secondary Monitoring IC Version：A.002

-10-