f969x Kit

Car Camcorder
User Manual
 Contents
Regulatory notices............................................................................... 3
Prohibition of co-location .................................................................... 3
WEEE Notice ......................................................................................... 3
CE Regulatory Notice ........................................................................... 4
Notes on Installation ........................................................................... 4
Caution ................................................................................................ 4
1 Introduction.......................................................................... 7
1.1 Features ................................................................................... 7
1.2 Package Contents .................................................................... 7
1.3 Product Overview..................................................................... 8
2 Getting Started ................................................................... 10
2.1 Storage Media ........................................................................ 10
2.1.1 Insert the Memory Card ............................................. 10
2.1.2 Remove the Memory Card .......................................... 10
2.2 Install Front Camera .............................................................. 11
2.3 Install Rear Camera................................................................ 12
2.4 Connect Front and Rear Camera ............................................ 13
2.5 Connect to Power ................................................................... 14
2.6 LED Indicator .......................................................................... 15
2.7 Powering the Camcorder On / Off .......................................... 15
2.7.1 Auto Power On/Off ..................................................... 15
2.7.2 Manual Power On ....................................................... 15
2.7.3 Reset .......................................................................... 15
2.8 Initial Settings........................................................................ 16
2.8.1 Set Time Zone ............................................................ 16
2.8.2 Set the Date / Time .................................................... 16
3 Using the Car Camcorder ...................................................... 17
3.1 Automatic Record .................................................................. 17

1
 3.2 The Recording Screen ............................................................ 18
3.3 Emergency Recording ............................................................ 20
3.4 Picture in Video ...................................................................... 20
3.5 Driving Safety ........................................................................ 21
3.5.1 Speed Cam Alert ......................................................... 21
3.5.2 Speed Limit Alert........................................................ 22
3.5.3 Driver Fatigue Alert .................................................... 22
3.5.4 LDWS .......................................................................... 23
3.5.5 FCWS .......................................................................... 24
3.6 Parking Mode ......................................................................... 25
3.7 Collision Detection ................................................................. 26
3.8 Playback Videos and Photos .................................................. 26
4 Set up Go Moto Plus App....................................................... 27
4.1 Download and installation ..................................................... 27
4.2 Wi-Fi connection .................................................................... 28
4.3 Use Go Moto Plus app ............................................................ 29
4.3.1 Main Screen ................................................................ 30
4.3.2 Playback, delete, download ....................................... 32
4.3.3 Camera Setting .......................................................... 34
4.3.4 Album ......................................................................... 35
5 Adjust the Settings .............................................................. 38
6 OTA Firmware Upgrade ........................................................ 40
7 Specifications ..................................................................... 43

2
About this Guide
The content in this document is for information purpose and is subject to
change without prior notice. We have made every effort to ensure that
this User Guide is accurate and complete.
However, no liability is assumed for any errors or omissions that may
have occurred.
The manufacturer reserves the right to change the technical
specifications without prior notice.

Regulatory notices
This document provides country- and region-specific non-wireless and
wireless regulatory notices and compliance information for your product.
Some of these notices may not apply to your product.

Prohibition of co-location
This device and its antenna(s) must not be co-located or operated in
conjunction with any other antenna or transmitter.

WEEE Notice
Disposal of Waste Electrical and Electronic Equipment and/or Battery
by users in private households in the European Union
This symbol on the product or on the packaging indicates
that this cannot be disposed of as a household waste. You
must dispose of your waste equipment and/or battery by
handling it over to the applicable take-back scheme for the
recycling of electrical and electronic equipment and/or
battery. For more information about recycling of this
equipment and/or battery, please contact your city office,
the shop where you purchased the equipment or your
household waste disposal service. The recycling of
materials will help to conserve natural resources and ensure
that it is recycled in a manner that protects human health
and environment.

3
CE Regulatory Notice
The product herewith complies with the requirements of IEC62368-
1:2014, the EMC Directive 2014/30/EU, the RED-Directive 2014/53/EU
and the RoHS Directive 2011/65/EU.
EU Health Protection: This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.

Notes on Installation
1. Please measure the front windshield viewing area, make sure not to
block driver's front view, install the camcorder below the rearview
mirror (the central, higher right position of the front windshield). And
we recommend that the sky and the land occupied by the screen
50%, fix the car holder and then adjust the camcorder so that the
lane is aligned with the screen. Proper installation enables the
camcorder to maximize the efficiency also can enhance the accuracy
of LDWS.
2. Make sure that the lens is within the wiping range of the windscreen
wiper to ensure a clear view even when it rains.
3. Do not touch the lens with your fingers. Finger grease may be left on
the lens and will result in unclear videos or pictures. Clean the lens
on a regular basis.
4. Do not install the camcorder on a tinted window. Doing so may
damage the tint film.
5. Make sure that the installation position is not hindered by the tinted
window.
6. This product is suitable for light windshield or light color heat-
resistant film windows , it will affect video quality if install it on the
dark windows or dark heat-resistant film windows.
7. Use the products of the attached power charger only, please do not
use other brand power charger, in order to avoid equipment burn.

Caution
 Due to local laws and vehicles safety considerations, do not
operate the camcorder while driving.
 Set up time zone, time and date accurately before you use this
camcorder.
 The firmware function in the camcorder is for reference only,
drivers are advised to exercise discretion based on actual road
conditions.

4
 The results of GPS positioning are only for reference, and should
not affect the actual driving situation. The camcorder also cannot
ensure the positioning accuracy.
 GPS positioning accuracy may differ depending on weather and
location such as high buildings, tunnels, undergrounds, or forests.
GPS satellite signals cannot pass through solid materials (except
glass). Tinted window will also affect the performance of the GPS
satellite reception.
 GPS reception performance on each camcorder may differ. The
camcorder cannot determine the accuracy of the positioning results
from different hardware.
 The values displayed in this camcorder, such as speed and position,
may be inaccurate due to the influence of surrounding environment.
They are for your reference only.
 This product is used only for non-commercial use, within the
maximum limits permitted by applicable law. We do not take any
responsibilities for the loss of use of the product.
 This camcorder gets warm when in use; this is normal.
 Improper use or operation of the product may result in damage of
the product or its accessories and void the warranty.
 Wi-Fi Signals are unable to pass through the building. The max limit
of signal transmission is 5m.
 Wi-Fi Operation Channel: Ch1~Ch11
 The product employs wireless data communication which may
interfere, or be interfered by, a near-by camcorder.
 Never use this camcorder in the vicinity of a microwave oven or at
places where there is radio interference.
 Radio wave reception may be worsened in specific environments.
 Please be advised that if another camcorder is also using the same
2.4GHz or 5GHz band as this product, the processing speed of both
camcorders may slow down.
 This product gets warm when in use; this is normal.
 Improper use or operation of the product may result in damage of
the product or its accessories and void the warranty.
 The radio frequency (RF) generated by this RF electronic camcorder
may cause adverse effects on the operation of other electronic
camcorders and result in malfunctioning. Wireless transmitters and
circuitry may also interfere with other electronic camcorders.
Therefore, do observe the following precautions:

5
 • Aircraft: Never use a radio transmitter when you are in an
airplane. Please switch off the Wi-Fi function of the camcorder.
• Vehicle: The radio frequency transmitted by this camcorder
may affect the electronic system in a motorized vehicle.
Please consult the manufacturer or dealer of your vehicle on
the possible effect.
• Pacemaker: In order to prevent any potential interference to a
pacemaker, anyone who uses a pacemaker should be advised,
that, when using this camcorder, a minimum distance of 15cm
(6 inch) should be kept between the camcorder and the
pacemaker; and never put this camcorder in a chest pocket. In
case of any doubt of interference, switch off the camcorder
immediately.
• Medical Camcorder: If you use a personal medical camcorder,
consult the camcorder manufacturer or your physician to
confirm if your camcorder is sufficiently shielded from the RF
transmission of this camcorder.
• Medical Facilities: Hospitals and medical institutes may use
facilities that are sensitive to an external RF energy. Observe
such instructions when the medical care personnel or any
posted sign requests you to switch off any camcorder that
may interfere the radio frequency.
• Explosion sites or any location with a posted sign: In order to
prevent interfering with an explosion activity, observe all the
signage and instructions in the Explosion Area or in a zone
with a “Switch Off 2-way Radios” sign by switching off
camcorders that may interfere with the radio frequency.
 Disposal of a battery into fire or a hot oven, or mechanically
crushing or cutting of a battery, that can result in an explosion.
 Leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of
flammable liquid or gas
 HP Inc. is NOT responsible for the loss of any data/content during
operation.
.
HP Inc.
 Before youis NOT responsible
start using theforsystem,
the loss it
ofis
any data/content
assumed thatduring
you
operation.
agree to the above statement.

6
1 Introduction
Thank you for purchasing this advanced Car Camcorder. This product is
specifically designed for real time video recording when driving. It also
supports a HP rear camera. You might ask distributor for further
information.
1.1 Features
Front Cam: f969x
• 5MP SONY’s Starvis sensor
• High resolution 4K (3840x2160)
• 3" TFT-LCD color screen
• Wide angle lens
• Built-in GPS and Wi-Fi
• Collision Detection, when a collision is detected, the camcorder will
automatically trigger the emergency recording
• Parking Mode
• Multifunction traffic safety reminder
Rear Cam: RC6
• High resolution 1920x1080
• Easy installation
1.2 Package Contents
The package contains the following items. In case there is any missing or
damaged item, contact your dealer immediately.

Car camcorder Electrostatic

Car charger
f969x sticker

Rear Camera RC6 Rear Cam Cable User Manual

7
1.3 Product Overview
Front cam f969x

No. Item No. Item

1 Speaker 8 Emergency Recording ( )

2 Bracket 9 Memory Card Slot
3 Wide Angle Lens 10 Rear Camera Connector port
4 Menu ( ) 11 Power Connector Port
5 Snapshot ( ) 12 Microphone
13 LED Indicator
6 Switch Camera Preview ( ) / Reset
14 LCD Color Touch Screen
7 Voice Record On/Off (MIC)
Note:
Tap the icons on screen or press the button (4~8) to operate the device.

8
Rear Cam RC6

No. Item No. Item

1 Wide Angle Lens 3 Cable Connector Port

2 Mount 4 Lens Rotation Bracket

9
2 Getting Started
2.1 Storage Media
2.1.1 Insert the Memory Card
Insert memory card with the pins facing forward, see the picture as
below:

2.1.2 Remove the Memory Card

If the camcorder is power on, please power off first and wait for the
procedure of switching off the camcorder completed before removing
the memory card.

Note:
1. Do not remove or insert the memory card when the camcorder is turned on. This may damage the
memory card.
2. Suggest to use microSD class V30 and memory storage 16GB or higher (support up to 128GB).
3. Please use this camcorder to format the micro SD cards before the initial use. The formatted file
type for this camcorder is FAT32 file.
4. Periodically format the microSD card (recommended period: once a month).

10
2.2 Install Front Camera
1. Put the electrostatic sticker onto the suggested area on the windshield.
Before putting the sticker, please wipe and clean the windshield.
During the installation, please make sure the bubbles in between the
sticker and the window are all gone.

2. Peel off the protective plastic sheet from the adhesive bracket.

3. Place and press the bracket firmly

onto the electrostatic sticker on the
windshield window. Make sure the
base is securely locked in place.

11
4. Adjust view angle.

2.3 Install Rear Camera

1. Position the rear camera at upper central of rear windshield. Use cable
to connect rear camera with front camera to check the preview image
is in right position (not upside down) before installation. If the preview
image is upside down, please rotate the camera 180 degree to make it
correct.

2. Check and confirm the field of rear view. Then clean the surface of the
windshield with alcohol to ensure that the adhesion surface is clean.

3. Remove the film on the mount of rear camera, and then hard press
rear camera to ensure firmly stuck.

12
Note:
1. Do not install the device on a tinted window. Doing so may damage the tint film.
2. This product is suitable for light windshield or light color heat-resistant film windows, it will affect
video quality if install it on the dark windows or dark heat-resistant film windows.

2.4 Connect Front and Rear Camera

Use the rear camera cable to connect with front camera and rear camera.
1. Plug phone jack into front camera’s A/V port. (Front camera is power-
off.)

2. Plug the other end of phone jack to rear camera’s earphone port.

13
3. Turn on front camera’s power, the rear camera image will be shown on
the right upper corner of front camera screen. Tap icon on front
camera to switch front or rear image.
Note:
1. Install rear camera at upper central position of the rear windshield.
2. Rear camera doesn’t support hot Plug-n-Play. Please turn off the front camera
before plugging the rear camera.
3. Any end of rear camera’s cable is fine to connect with front camera or rear camera.
For better wire installation, suggest using 90゜end to connect with front camera, and
straight end to connect with rear camera.

2.5 Connect to Power

Use only the supplied car charger to power up the camcorder.

1. Connect one end of the car charger to the USB connector of the
camcorder. USB port input: DC 5V / 2A.
2. Plug the other end of the car charger to the cigarette lighter socket
of your vehicle. Once the vehicle engine is started, the camcorder
automatically powers on. Car charger input: DC 12 / 24V.

14
2.6 LED Indicator
Status Explanation LED Indicator Color

Power on, standby Solid Green Light

Recording/ Recording
Flash Red Light
and screen off

2.7 Powering the Camcorder On / Off

2.7.1 Auto Power On/Off
Start the car engine, wait a few seconds to charge the camcorder, and
then screen will light up and the camcorder will automatically power on
and start recording.
Once the vehicle engine shuts down, the camcorder automatically saves
the recording and turns off the power.
Note: The camcorder is built-in with super capacitor. When start the engine, please wait a few
seconds to charge the camcorder, and then it will auto power on and start recording.

2.7.2 Manual Power On

To manually turn on the power, press the POWER button.

2.7.3 Reset
Press and hold the Power button for 3 seconds to reset the device.

15
2.8 Initial Settings
Before using the camcorder, we recommend you setup the correct Time
Zone, Date and Time.
Note:
Please note that if you tap the icon during recording, the system will stop recording and enter
OSD menu. Make sure the recording is already stopped then continue operating the menu.

2.8.1 Set Time Zone

To set the time zone, do the following:
1. Tap icon to enter the OSD menu, and tap Setting.
2. Tap or icon and choose Set Time Zone.
3. Tap or icon and choose current time zone.
4. Tap twice < icon to return to recording screen.

Note:
If satellite positioning is not successful, camcorder’s clock will run based on user defined time.

2.8.2 Set the Date / Time

To set the correct date and time, do the following:
1. Tap icon to enter the OSD menu, and tap Setting.
2. Tap or icon and choose Date/Time.
3. Tap date or time space and tap or icon to increase or
decrease numbers.
4. When setting is finished, tap three times < icon to return to
recording screen.
Note:
To ensure the accuracy of the video file time, please reset the date and time when not in use over 7
days.

16
3 Using the Car Camcorder
3.1 Automatic Record
Start the car engine, wait a few seconds to charge the camcorder, and
then screen will light up and the camcorder will automatically power on
and start recording.
Recording will automatically stop when the engine is switched off.

Note:
1. Some vehicle power supply would not turn on / off automatically with the car engine start, if the
camcorder cannot automatically power on/off with the car engine, please manually connect the
power supply with the vehicle power, and then power on, or manually power off the camcorder and
then release the connector with the car power supply.
2. It can be configured to save a video file for every 1, 2 or 3 minutes of recording.
3. All the videos and photos are saved in the memory card, if memory card is full, loop recording will
generally overwrite the oldest video file.
4. The camcorder is built-in super capacitor. After start the car engine, please wait a few seconds for
charging the camcorder, and then the camcorder will automatically power on and start recording.

17
3.2 The Recording Screen

No. Icon Item Description

1 Recording Duration Indicates the video current duration.

Wi-Fi on
2 Wi-Fi icon
Wi-Fi off

Voice Record Indicates voice recording sets as off,

3
icon the sound will not be recorded.

Resolution
4 Indicates the video resolution.
icon

Indicates the strength of satellite

Satellite Positioning positioning. If the icon shows in red
5 on screen, it indicates that the
icon
camcorder cannot complete the
satellite positioning.

card inserted
6 MicroSD card
no card

18
 Indicates camcorder is connected with
7 Power icon
power.

Tap this icon or press button to enter

8 Menu
the OSD menu.
Tap this icon or press button to
9 Capture
capture video screen shot.
Tap this icon or press button to
10 Switch Camera
switch front or rear camera screen.

Tap this icon or press button to turn

11 Voice Record
on or off voice record.

Tap this icon or press button to

Emergency
12 manually activate emergency
Recording
recording.

Indicates the current recording date

13 Date / Time
and time.

Indicates rear camera recording

14 VIV (Video in Video)
screen.

19
3.3 Emergency Recording
To Start the Emergency Recording, do the following:
1. During Video Recording, tap the
icon to enter emergency
recording mode, the Recording
Duration on the upper left corner of
the screen will turn to yellow from
red, and the recorded file will be
protected.
2. The emergency video recording length is same as the recording
interval setting. When the emergency recording length reaches the
setting, the system will return to the general recording mode.

Note:
1. If the Collision Detection function is enabled and a collision is detected, the camcorder will
automatically trigger the emergency recording.
2. The emergency file is created as a new file and saved in Emergency folder, which will be protected
to avoid being overwritten by normal loop recording. The Emergency folder will occupy 20% of
available memory card capacity. When the Emergency folder is full, the oldest emergency file will be
automatically deleted by the newest emergency file.

3.4 Picture in Video

You can also use this camcorder to take snapshots of the current scene.

1. In recording status, tap icon to

capture recording screen shots.
2. When the icon shows in the
central of screen, it means the
screenshots is completed.

Note:
1. The screen shots image resolution quality is depending on the video resolution setting.
2. The picture resolution is limited by the speed of the target object and changes in ambient lighting.
The photograph function is better used for taking still pictures in accident scenes or when the car is
stopped to wait for a traffic light.

20
3.5 Driving Safety
The following driving safety function is for reference only. Drivers are advised
to exercise discretion based on actual road conditions.

Note:
1. The Driving Safety function is limited to triggering no more than two alarms at the same time. If a
voice and alert message have been triggered, any other alarm will be ignored until either of the two is
settled.
2. Satellite positioning must be completed before functions such as Speed Cam Alert, Speed Limit
Alert, LDWS and FCWS to be enabled. Be sure to check that Satellite positioning has been completed
prior to using the product.
3. The detections of LDWS and FCWS may be inaccurate when used in rain, at night or in environments
of insufficient lighting. Drivers are advised to exercise discretion based on actual road conditions.

3.5.1 Speed Cam Alert

If the Speed Cam Alert function is enabled, once your car’s location is
determined by GPS and approaches a speed cam, this product produces
audible alert and screen message.
To enable the Speed Cam Alert, do the following:

1. Tap icon to enter the OSD menu

and choose Setting.
2. Tap / icon to select Speed
Cam Alert, and tap the right frame to
turn it on.
3. Tap the < icon twice to return
recording screen.
4. The alarm screen turns red to remind you to slow down if you are
driving faster than the speed limit.

Note:
The speed cam alert function must have the speed cam datum from the country you use. The function
will be void if the product is used in any other countries. Please consult with the shop you purchased if
the function is void. There is no guarantee the speed cam datum will be included for the worldwide
countries.

21
3.5.2 Speed Limit Alert
If the Speed Limit Alert function is enabled, this product produces
audible alert and screen message once your car’s location is determined
by GPS and its running speed exceeds the set limit.
To set the Speed Limit Alert, do the following:
1. Tap icon to enter the OSD menu and choose Setting.
2. Tap / icon to select Speed
Limit Alert.
3. Tap / icon to choose
customized speed limit alert from 50
to 200 km/h (30~125mph)
4. Tap the < icon three times to return
recording screen.
5. The alarm icon will show up at right down corner of the screen to
remind you to slow down if you are driving faster than the speed
limit.

3.5.3 Driver Fatigue Alert

If the Driver Fatigue Alert function is enabled, this product produces
audible alert and screen message one hour after it has begun recording
and repeats the alerts every half hour afterwards.
To enable the Driver Fatigue Alert, do the following:
1. Tap icon to enter the OSD menu and choose Setting.
2. Tap / icon to select Driver Fatigue Alert, and tap the right
frame to turn it on.
3. Tap the < icon twice to return recording screen.
4. The alarm icon will show up to remind you to take a rest from long
distance driving.

22
3.5.4 LDWS
Once your car’s location is determined by GPS and the LDWS function is
enabled, this camcorder produces audible alert and screen message
when you drive off of or change lanes at speeds over 70 km/h (43 mph).
To set the LDWS (Lane Departure Warning Systems), do the following:

1. Tap icon to enter the OSD menu and choose Setting.

2. Tap / icon to select LDWS, and tap the right frame to turn
it on.
3. Tap the < icon twice to return recording screen.
4. After enabling LDWS, the screen will display traffic lane align icon
, please adjust the camcorder so that the horizontal line and
the eye level are overlapped and the slash lines are centered in the
driving lane.

5. This product produces audible alert and screen message when

LDWS is activates.

Note:
1. Please measure front windshield viewing area, do not block the driver's forward field of vision, and
install the camcorder below rearview mirror (upper central of the front windshield). We recommend
that the sky and the ground occupied 50 % of the video screen, install the bracket then adjust the
camcorder to make the lane is aligned to the lane alignment icon. Correct installation makes the
camcorder to maximize the efficiency and improve the accuracy of LDWS.
2. Make sure that traffic lane align icon will not be obscured other things (e.g. hood). It may cause
misjudgment if the endpoint is obscured.

23
3.5.5 FCWS
Once your car’s location is determined by GPS and the FCWS function is
enabled, this camcorder produces audible alert and screen message
when you drive at speeds over 60 km/h (37 mph) and are less than 20 m
away from the car in front of you. If the camcorder not completes the
satellite positioning, and the leading vehicle distance below 20 meters, it
will also produce a warning screen and beep reminder.
To set the FCWS (Forward Collision Warning System), do the following:

1. Tap icon to enter the OSD menu and choose Setting.

2. Tap / icon to select FCWS, and tap the right frame to turn it
on.
3. Tap the < icon twice to return recording screen.
4. After enabling FCWS, the screen will display traffic lane align icon
, please adjust the camcorder so that the horizontal line and
the eye level are overlapped and the slash lines are centered in the
driving lane.

5. This product produces audible alert and screen message when

FCWS is activates.

24
3.6 Parking Mode
To monitor the vehicle when it is parked, you can activate Park Recording,
or Collision Detection, or Timelapse.
Before you activate Parking Mode, please install ACC cable through
professional car service shop.

Follow the steps below to change the settings for Parking Mode:
1. Tap icon to enter the OSD menu and choose Parking Mode.
2. Choose one of three types, and tap the right frame to turn it on.
- Park Recording: The camcorder will turn off the screen
temporarily, but still in recording status. The recorded files will be
saved in “Normal” folder. Once the collision or vibration is
detected, it will automatically trigger emergency recording, and
the file will be saved in “Event” folder. The recorded file is
according to Record Interval setting.
- Timelapse: The camcorder will turn off the screen temporarily,
but still in 1fps timelapse recoding mode. The recorded files will
be saved in “Normal” folder. When the camcorder detects any
vibration/collision, it will automatically trigger emergency
recording and the file will be saved in “Event” folder. The
recorded file is according to Record Interval setting.
- Collision Detection: The camcorder will turn off the screen
temporarily, but still in standby detection status. When the
camcorder detects any vibration/collision, it will automatically
trigger emergency recording and record the event for 30 seconds.
The file will be saved in “Event” folder. The recorded file is 30
seconds per file.
3. Tap the < icon to return recording screen.
4. When the setting is finished, disconnect ACC, the camcorder will
enter Parking Mode automatically. When the ACC is once again
connected, Parking Mode will be automatically disable and resume
to normal recording.

Note: ACC cable is not included in the package. Please ask for more information from your
distributor.

25
3.7 Collision Detection
If the Collision Detection function is enabled, this camcorder begins
emergency recording once it detects any collision. Sensitivity of the
Collision Detection function is set to Normal by default, if user wants to
change the settings of Collision Detection, do the following:

1. Tap icon to enter the OSD menu and choose Setting.

2. Tap / icon to select Collision Detection, and tap High,
Middle or Low sensitivity.
3. Tap the < icon three times to return recording screen.

3.8 Playback Videos and Photos

1. Tap icon to enter the OSD menu and choose File Browser.
2. Tap Normal, Event, or Picture file icon to enter file listing.
3. Tap the < icon three times to return recording screen.
4. Tap the file to playback, or tap the icons in the bottom to delete the
file or switch the file shot by front/rear camera.

Previous page

Next page

Delete file

Delete all files

Switch front/rear camera

26
4 Set up Go Moto Plus App
4.1 Download and installation
The camcorder allows you to connect to the smart phone via the app.
When using for the first time, install the [Go Moto Plus] app for your
smart phone.
1. Scan below QR code or download Go Moto Plus app from Google
Play or App Store.
2. Install the app.

iOS/Android

APP layout and features may be changed subject to different

software versions. Please refer to Google Play or APP Store
for update.

27
4.2 Wi-Fi connection
1. In the recording screen, tap icon to stop recoding and enter
menu.
1. Tap Wi-Fi Switch icon to turn it on.
2. Tap < icon to return to preview screen.
3. Using the Wi-Fi function of your smart phone, search for the
camcorder ID “hp_f969x_xxxx” from the list (last 4 numbers are
system random numbers). Enter default password 12345678.

4. The Wi-Fi icon will turn color to green, and your connection has
been successfully established.

Note:
1. The smart phone shall be within a maximum of a 5m distance from the camcorder without any
buildings in between.
2. When the Wi-Fi function of the camcorder is ON but not yet connected with your smart phone, or
the connection is disconnected, the Wi-Fi icon on camcorder’s screen will be white.
3. After connecting the smart phone with the camcorder, and activate app feature “Network
Streaming”, all the button operation of the camcorder will be disable; all the operations shall be
carried out via the Go Moto Plus App.
4. The language of the Go Moto Plus app will be consistent with your smart phone, beyond the
language options, the app will be activated with default language.
5. Supports OS: Android 9.0 or higher, iOS 13 or higher, Harmony 2 or higher.

28
4.3 Use Go Moto Plus app
Tap [Go Moto Plus] icon to activate the application. The
main screen will pop up. Follow the below instruction to operate
this application.

29
4.3.1 Main Screen

icon Description

/ Go Moto Plus logo / SD card message

30
 Preview screen

Switch front and rear camera preview

image

Full screen display

Snapshot

Start/Stop recording
/
Camera File (check the files in
microSD)

Camera Setting

To remind the emergency files in the

microSD card is about to be full and
going to over write the oldest files.
Backup the files and clear up the
emergency folder, and this message
will be gone.
Map

NOTE:
1. The camcorder will synchronize date/time with smart phone once open the app.
2. App’s interface or feature may differ from app versions. Please refer to the latest
version downloaded from Google Play Store or iOS App Store.
3. Android phone please download “Google Offline Map” in advance. Follow the
steps: Update or download the latest version of Google Map open Google Map
app Tap the User Portrait icon on the top Tap “Offline Maps” Tap ”SELECT
YOUR OWN MAP”  Select the area that you want to download  Tap
“DOWNLOAD”.

31
4.3.2 Playback, delete, download
You can use this feature to playback or delete the file saved in camcorder,
or to download the file from camcorder to your mobile device.

1. Tap the icon [Camera File], the camcorder will stop recording.
2. The files saved in the camcorder will be displayed on your smart
phone. There are Loop and Locked two folders. The thumbnail
image corner will show F or R, which means shooting by front cam
or rear cam. Tap the image and it will start to playback.

32
3. Tap the right top corner “Select” and pick up the files that you want
to delete or download, and tap the icon in the screen bottom to
execute.

icon Description
Download the file to “Local Album”. The
downloaded file can be playback without
connecting with the camcorder.

Video Screenshot.

Delete the file in microSD card.

Downloaded file will show

“Downloaded” in thumbnail image.

33
Note:
1. If you find the video playback without audio, please check if you turn on Voice Record on the
Setting. If you do turn it on, it means the smart phone itself doesn’t support the video decoding. It’s
not the problem of the file. We recommend you to install a free app software such as VLC to
playback the file.
2. Deleted files cannot be recovered. Ensure the files have been backed-up before deletion.
3.More files to be read or downloaded, you are recommended to take out microSD card from
camcorder and use computer.

4.3.3 Camera Setting

You can use this feature to set up most of your car camcorder options.

1. Tap icon [Camera Setting].

2. Refer to the below table for details of menu items and available
menu options.

34
4.3.4 Album
You can use this feature to playback or delete the file that you download
in your smart phone. The files in the Album can be reviewed without
connecting with camcorder.

1. Tap icon [Album]. (It will stop recording if the camcorder is

connected.)

35
2. Pick up the file that you want to playback, delete or edit.

Icon Description

Edit video or snapshot.

Share the file to social media.

Video Screenshot. The file will be saved in

“Album”.

36
 Save the file to smart phone’s album. When
the file saving is done, screen message will
show “Save to smartphone’s album
successfully”, and the smart phone’s album
will create a new folder named “Go Moto
Plus”.
Delete the file in the App’s Album. The file in
the camcorder still exists.

Note:
1. Deleted files cannot be recovered. Ensure the files have been back-up before deletion.
2. If you find the downloaded files unable to playback or without audio, which means the smart phone
itself does not support the video decoding. It’s not the problem of the file. We recommend you to
install one free App software such as VLC to playback the file.

37
5 Adjust the Settings
In the recording screen, tap icon to enter Menu, and tap Setting to
enter camera settings. The camcorder will stop recording.
Followings is available menu options.
Menu Description Available option

Set the recording duration for each 1 min/ 2 min/

Record Interval
recorded video file 3 min
3840x2160 25fps HDR
2560x1440 30fps HDR
Resolution Setting of video resolution
1920x1080 60fps HDR
1920x1080 30fps HDR
Voice Record Setting for voice record in the video. On / Off
The camcorder will automatically
trigger emergency recording when
Collision Off / Low / Middle /
tremor of a collision is detected.
Detection High
The sensitivity level can be
adjusted.
Set the on-screen display menu According to ship to
Language
language area
Set LCD off time. Camcorder screen
will be off after a set time if no
operation is detected. Touch the On / 7 sec off / 1 min
LCD Setting
screen or press power button will off / 3 min off
switch it on. (Recording is not
affected when screen is off).
Date/time Set up date and time

Volume Adjust sound volume. 1 ~ 10

Key tone To turn on or off key tone. On/ Off

Anti-flicker Reduce flicker on LCD 60Hz / 50Hz

GPS status GPS reception status

Time Zone To select time zone GMT -12 ~ GMT +12

Speed Unit To set up speed unit KM/H/ MPH

To enable or disable car speed from
Car Speed On/ Off
watermark on videos.

38
 Menu Description Available option
Off /
Speed Limit Alert To customize speed limit alert. 50 ~ 200km/h
(30~125mph)
If the Speed Cam Alert function is On/ Off
enabled, once your car’s location is
determined by GPS and approaches
Speed Camera a speed cam, this product produces
Alert audible alert and screen message.
*This feature is subject to shipping
areas with speed cam points datum
embedded.
When Driver Fatigue Alert is On/ Off
enabled, audible alert and screen
Driver Fatigue
message will be activated 1 hour
Alert
after the camcorder is powered on,
with a repetition every 30 minutes.
Once your car’s location is On/ Off
determined by GPS and the LDWS
function is enabled, this camcorder
LDWS produces audible alert and screen
message when you drive off of or
change lanes at speeds over 70
km/h (43 mph).
When FCWS is activated after On/ Off
satellite positioning, camcorder will
issue audible alert and screen
FCWS message when vehicle speed is
above 60 km/h (37 mph) and the
distance with the front vehicle is
less than 20m.
APP download QR code to download app
Reset the camcorder to the initial
Default Yes / No
factory default settings.

39
6 OTA Firmware Upgrade
Connect Wi-Fi of the camcorder and smart phone, open the app. If there
is a new firmware published, the screen will show notification as below.

40
Follow the app instruction,
1. Tap “Upgrade Now”note1 to download the new firmware to smart
phonenote2. (Figure1)
2. When download is completed, screen will show “Upgrade file has been
downloaded”. Make sure smart phone Wi-Fi is connected with
camcorder, then, tap the “Upgrade Now” on the right bottom corner.
Then, the new firmware will be sent from smart phone to the
camcorder. (Figure2)

Figure1 Figure2

3. When the file is dispatched successfully, screen will show “SENT”. The
camcorder will then re-boot and automatically upgrade the firmware.
After firmware is upgraded, the camcorder will power off.

41
4. Manually power on the camcorder, and it will work in the latest
firmware.
NOTE:
1. If tap “Remind me later”, the app notification will pop up every time when the
camcorder is connected.
2.When the smart phone’s Wi-Fi is occupied by the camcorder, iOS system will auto switch
to cellular data, and the network is still useable; but, Android system won’t. Please
attention the following notices to upgrade new firmware.
(1)iPhone User: Because the smart phone’s Wi-Fi is connected with the camcorder,
iPhone will use cellular data to download the new firmware. If you don’t want to use
cellular data to download, cut off the smart phone’s Wi-Fi connection with camcorder
firstly, then connect with local area network. Then, open the app once again and tap
“Upgrade Now” to download new firmware to smart phone.
(2)Android User: Because the smart phone’s Wi-Fi is connected with the camcorder,
Android phone has no network to download the file. Please cut off smart phone’s Wi-Fi
connection with the camcorder firstly, and connect with local area network. Or, turn off
the Wi-Fi, and use cellular data. Then, open the app once again and tap “Upgrade Now”
to download new firmware to smart phone.

42
7 Specifications
Front Cam: f969x

Item Description

Image sensor 5MP SONY Starvis sensor

Effective pixels 2616 (H) x 1964 (V)

Storage media Supports microSD class V30 or higher

LCD display 3” LCD color TFT

Wide Angle Fixed Focus lens

Lens
Aperture: Up to F1.8

Focus range 1.5m~Infinity

Satellite System GPS

Resolution:
3840x2160 25fps HDR
2560x1440 30fps HDR
Video 1920x1080 60fps HDR
1920x1080 30fps HDR

Format: TS

Still image Resolution: depends on video resolution setting

(Photograph)
Format: DCF (JPG)

Shutter Electronic shutter

G-Sensor 3-Axis G-Force sensor

ISO Auto

White Balance Auto

Microphone Built-in

Speaker Built-in

43
 Item Description

Interface Mini USB, A/V

Power Super Capacitor

Operating
0° ~ 45° C
Temperature

Operating Humidity 20 ~ 70% RH

Storage
-20° ~ 70° C
Temperature

Android 9.0 and above

App Supports OS iOS 13 and above
Harmony 2 and above

Dimensions 86 x 88 x 69.8 mm

Weight Approx. 101.5g

Built-in IEEE 802.11g/n(HT20) Wi-Fi chip: RTL8731BU

Frequency range 2.4GHz: 2412~2483.5MHz
5GHz: 5150~5250, 5250~5350, 5470~5725, 5725~5850 MHz
Wi-Fi Channel 2.4GHz: CH1~CH14
5GHz: CH36~CH48, CH52~CH64, CH100~CH140, CH149~CH165

Rear Cam RC6

Item Description

Image sensor 2MP CMOS sensor

Effective pixels 1985 (H) x 1105 (V)

Wide Angle Fixed Focus lens

Lens
Aperture: Up to F2.0

Focus range 1.5m~Infinity

Video Resolution: 1920x1080 25fps

44
 Item Description

Format: according to front cam

Operating
0° ~ 50° C
Temperature

Storage
-20° ~ 70° C
Temperature

Dimensions 47 x 28.5 x 23 mm

Weight Approx. 16g

45