CATALINA
21" OVAL DROP-IN SINK
¨ 4110BGW Single Hole
¨ 4140BGW 4" Center
¨ 4180BGW 8" Center
PRODUCT SPECS: COMPLIANCE CERTIFICATIONS
- Vitreous china Meets or exceeds the following:
- Front overflow hole - IAPMO cUPC
- Single hole, 4" or 8" faucet center - ASME A112.19.2 / CSA B45.1-2013
- Template supplied - ANSI A117.1 ADA Standard
- Faucet not included - NBC and OBC Section 3.8 Barrier
Free design and CSA B651 Standard
DIMENSIONS:
514mm W x 432mm D x 194mm H SHIPPING
20¼" W x 17" D x 7⅝" H Cube 1.92
GW 22 lbs
NOTES: Dimensions of fixtures are nominal and may vary within the range
of tolerances established by ASME standard A112.19.2. Measurements are
TO BE SPECIFIED subject to change or cancellation. No responsibility is assumed for use of
Colour: superseded or voided pages.
This product is designed to comply with ADA and OBC barrier-free
n Soft White requirements, if installed according to the standard. It is the responsibility
of the installer to comply with this standard prior to installation.
Single Hole, 102mm (4") or 204mm (8")
3 Holes
32mm (1¼")
62mm
(2½")
180mm
(7⅛")
FAUCET DRILLING
*483mm (19") Max.
113mm
(4⅜") Max. 432mm (17")
COUNTER
44mm TOP
(1¾")
64mm (2½") *864mm (34") Max 6"
COUNTER TOP FOR ADA COMPLIANCE 153mm
OR 7-5/8"
CUT OUT
*840mm (33") Max 194mm
478mm x 395mm
(18⅞" x 15½") FOR OBC
OVERFLOW HOLE BARRIER-FREE *200mm
FINISHED WALL
COMPLIANCE (7⅞") Min.
514mm (20¼")
*685mm
(27")
COUNTER Min.
260mm TOP KNEE
(10¼") CLEARANCE
TOE CLEARANCE
*229mm (9") Min.
318mm
204mm (8")
(12½")
FINISHED FLOOR
SUPPLIES AS *150mm (6") Max.
REQUIRED
1¼" O.D. WASTE
NOTE: Starred measurements comply with ADA and OBC barrier free accessibility requirements. Dimensions shown for
location of supplied and waste are suggested.
R EV I S E D J U LY 2 01 8
C A N A DA 5970 CHEDWORTH WAY, UNIT B, MISSISSAUGA. ONTARIO, CANADA L5R 4G5 | [Link]
USA 6241 NORTHWIND PARKWAY, HOBART, INDIANA, USA 46342 | [Link]
