Quick-Start Guide

Dual-4K Monitor Hybrid Docking Station - Dual HDMI®, Dual DP, or HDMI & DP - USB-C/USB 3.1

Product Diagram (DK30A2DHU/ DK30A2DHUUE) Port/LED Function

Front • Connect the Universal Power Adapter to
supply power to the Docking Station
4 DC 20V Port • Type-N barrel connector
• 20V 2A

5 USB-B Host Port • Connect the Host Computer

• Connect a DisplayPort Enabled Display

Device
• DisplayPort Version 1.2
6 Video 1 Ports
--Or--
1 2 3 • Connect an HDMI Enabled Display Device
• HDMI Version 2.0
Rear • Connect a DisplayPort Enabled Display
Device
• DisplayPort Version 1.2
7 Video 2 Ports
--Or--
• Connect an HDMI Enabled Display Device
• HDMI Version 2.0
8 RJ45 Port • Connect a Network Device
• Green: The Docking Station detects a link
RJ45 LEDs (above the speed of 10 Mb, 100 Mb, or 1 Gb
9 RJ45 Port)
• Flashing Amber: Indicates network activity
5 6 7 8/9 10 • Connect a USB Storage Device (e.g. flash
4
10 USB-A Ports x 4 drive), or USB Peripheral Device
• USB-A 3.1/3.0 (5Gbps)

Port/LED Function
Requirements
• Connect an Audio Device
1 3.5mm Audio Port Depending on the Host Laptop’s operating system, the required drivers will
• 4 Position Audio Jack for Headset use
automatically be installed when the Docking Station is connected and powered on. For
• Connect a USB Storage Device (e.g. flash the latest drivers, requirements, and instructions, please visit:
2 USB-A Ports x 2 drive), or USB Peripheral Device www.startech.com/DK30A2DHU.
• USB-A 3.1/3.0 (5Gbps)
Note: If the drivers do not automatically install, navigate to the Support tab to locate
• Solid: The Docking Station is connected and the driver installation instructions and downloads.
3 Power LED receiving power

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: December 2, 2022 1:41 PM
Installation Powering the Docking Station
Connecting a Host 1. Select the appropriate regional Power Cord and connect it to the Universal Power
Adapter.
• Connect the USB-C to USB-B Cable (included) or the USB-A to USB-B Cable
(included) to the USB-B Host Port on the rear of the Docking Station and the other 2. Connect the Universal Power Adapter to the DC 20V Port on the rear of the
end to a USB Port on the Host Computer. Docking Station and to an AC Electrical Outlet.
Connecting the Display Devices Operation
1. Connect a DisplayPort or HDMI Cable to the DisplayPort or HDMI Enabled Display
Device and to the Video 1 DisplayPort Port or Video 1 HDMI Port on the rear of the Configure the Displays
Docking Station. • Use the Windows or macOS operating system to adjust display settings for multiple
2. Repeat step 2 to add a second DisplayPort or HDMI Enabled Display Device to the DisplayPort and/or HDMI Enabled Display Devices.
Video 2 Ports on the rear of the Docking Station.
Connecting Peripherals
1. Connect an Audio Device to the 3.5 mm Audio Port on the front of the Docking
Station.
2. (Optional) Connect a USB-A Storage Device or other USB-A Peripheral to the
USB-A Ports on the front and/or rear of the Docking Station. Connect up to 6 total
USB Devices (2 front, 4 rear).
3. Connect a CAT5e/6 Cable to the RJ45 Port on the rear of the Docking Station and
to an RJ45 Port on a compatible Network Device.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help Warranty Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This product is backed by a three-year warranty.
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void Limitation of Liability
the user’s authority to operate the equipment. In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents)
Industry Canada Statement for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of
This Class B digital apparatus complies with Canadian ICES-003. business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
CAN ICES-3 (B)/NMB-3(B) or exclusions contained in this statement may not apply to you.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: Safety Measures
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may • If product has an exposed circuit board, do not touch the product under power.
cause undesired operation of the device. Mesures de sécurité
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes: • Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, 安全対策
• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。
même si le brouillage est susceptible d’en compromettre le fonctionnement.
IC Radiation Exposure Statement Misure di sicurezza
This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled environment. This equipment • Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.
should be installed and operated with minimum distance 0.5cm Säkerhetsåtgärder
between the radiator and your body. • Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols StarTech.com StarTech.com LLP StarTech.com StarTech.com Ltd. FR: startech.com/fr
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third- Ltd. 4490 South Hamilton Ltd. Siriusdreef 17-27 DE: startech.com/de
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only 45 Artisans Cres Road Unit B, Pinnacle 15 2132 WT Hoofddorp ES: startech.com/es
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which London, Ontario Groveport, Ohio Gowerton Rd, The Netherlands NL: startech.com/nl
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered N5V 5E9 43125 Brackmills IT: startech.com/it
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the Canada U.S.A. Northampton JP: startech.com/jp
property of their respective holders. NN4 7BW
United Kingdom