Quick-Start Guide
Dual-4K Dock | Thunderbolt 3/USB-C | DP 1.4/HDMI
Product Diagram (TB3CDK2DH/TB3CDK2DHUE) 7 Lock Slot (side) • Used to deter the theift of the Docking Stocking.
• Used to connect the Docking Station to a
8 RJ45 Port Network Device.
• Used to connect a USB Device (mouse, flash
1 2 3 4 5 6 7 8 9 10 11 12 13 9 USB-A Ports (2) drive, etc.).
Component Function • Used to connect a USB Device (mouse, flash
10 USB-C Port drive, etc.)..
• Solid White: Indicates that the Docking Station
1 Power LED DisplayPort Port:
is receiving power.
For Thunderbolt 3 and USB-C Laptops: • Used to connect a Display Device to the
Docking Station.
• Used to connect a Host Thunderbolt 3 or USB-C Video 1 DisplayPort Port/
laptop to the Docking Station. 11 - or -
HDMI Port
• The Docking Station supports USB Power HDMI Port:
Delivery. USB Power Delivery sends power over a • Used to connect a Display Device to the
Thunderbolt 3 or USB-C cable to the connected Docking Station.
Thunderbolt 3/USB-C Host Host Computer.
2 DisplayPort Port:
Port Note: The Host Computer’s Thunderbolt 3 port
must support Power Delivery. • Used to connect a Display Device to the
Docking Station.
USB-C Laptops: Video 2 DisplayPort Port/
12 - or -
Note: To ensure maximum video compatibility, the HDMI Port
Host Computer must support DP Alt Mode when HDMI Port:
connecting to the Docking Station. • Used to connect a Display Device to the
Mounting Holes x 4 • Used to mount the Docking Station to a Display Docking Station.
3 (bottom) or Surface. 13 DC 20V Port • Used to power the Docking Station.
• Used to charge a connected USB Device.
4 USB-C Port (Charging) • Supports up to 5V at 3A, 15W charging. Requirements
• While charging a connection to a Host For the latest requirements and User Manual, please visit www.startech.com/
Computer is not required. TB3CDK2DH or www.startech.com/TB3CDK2DHUE
• Used to charge a connected USB Device.
• Fast-charge devices that comply with USB Powering the Docking Station
Battery Charging Specification Revision 1.2. 1. Select the appropriate regional Power Cord and connect it to the Universal Power
5 USB-A Port (Charging)
• Supports up to 5V at 1.5A, 7.5W charging. Adapter.
• While charging a connection to a Host 2. Connect the Universal Power Adapter to the DC 20V Port on the Docking Station
Computer is not required.
and to an AC Electrical Outlet.
• Used to connect an Audio Device (e.g.
6 3.5 mm Audio Port headphones, speakers, headset, etc.) to the
Docking Station.
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: January 25, 2022 2:52 PM
Connecting a Host Windows
The Thunderbolt 3/USB-C Host Port lets you connect your Host Computer to the 1. Click on the pop-up message.
Docking Station while charging the Host Computer. 2. Select Always Connect from the list.
Thunderbolt 3 Host 3. Click OK.
• Connect a Thunderbolt 3 Cable (included) to the Thunderbolt 3/USB-C Host Port 4. If required, follow any other on-screen instructions to complete the installation.
on the Docking Station and to a Thunderbolt 3 port on the Host Computer.
Note: The Thunderbolt 3/USB-C Port will have a Thunderbolt icon above the port,
indicating that the port has Thunderbolt 3 capabilities.
USB-C Host
To ensure maximum video compatibility, the Host Computer must support DP Alt
Mode when connecting to the Docking Station through the Thunderbolt 3/USB-C
Port.
• Connect a Thunderbolt 3 Cable to the Thunderbolt 3/USB-C Port on the Docking
Station and to a USB-C port on the Host Computer.
Driver Installation
The Docking Station will automatically detect and install the required drivers when
connected to a Thunderbolt 3 or USB-C port on the Host Computer.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the Warranty Information
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not This product is backed by a three-year warranty.
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Limitation of Liability
• Reorient or relocate the receiving antenna.
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents)
• Increase the separation between the equipment and receiver. for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
• Consult the dealer or an experienced radio/TV technician for help Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: or exclusions contained in this statement may not apply to you.
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including Safety Measures
interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void
the user’s authority to operate the equipment. • If product has an exposed circuit board, do not touch the product under power.
Industry Canada Statement Mesures de sécurité
This Class B digital apparatus complies with Canadian ICES-003. • Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada. 安全対策
CAN ICES-3 (B)/NMB-3(B) • 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may Misure di sicurezza
cause undesired operation of the device. • Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation Säkerhetsåtgärder
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, • Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.
même si le brouillage est susceptible d’en compromettre le fonctionnement.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols StarTech.com Ltd. StarTech.com LLP StarTech.com Ltd. StarTech.com Ltd. FR: fr.startech.com
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third- 45 Artisans Cres 4490 South Hamilton Unit B, Pinnacle 15 Siriusdreef 17-27 DE: de.startech.com
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only London, Ontario Road Gowerton Rd, 2132 WT Hoofddorp ES: es.startech.com
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which N5V 5E9 Groveport, Ohio Brackmills The Netherlands NL: nl.startech.com
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered Canada 43125 Northampton IT: it.startech.com
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the U.S.A. NN4 7BW JP: jp.startech.com
property of their respective holders. United Kingdom