TECHNICAL INFORMATION
2016. 11. 24
DICDRY LX-8321/KW-75
Type of Adhesive
Aromatic type two-component polyurethane laminating adhesive
Application Field
LX-8321/KW-75 is designed for the lamination of plastic films to other plastic films, to AL-Vacuum metallized film
and AL foil.Principal uses are for flexible packaging materials, such as dry foodstuffs, liquids and aggressive uses
are for AL foil packaging products, such as shampoo.The suitability of these laminates should be evaluated
before commercial production.
Specifications
DICDRY LX-8321 KW-75
Polyester Polyisocyanate
Solids 70% 75%
Viscosity 2800-4000mPas 1000-3000 mPas
Solvent Ethyl Acetate Ethyl Acetate
Mixing Ratio 18 : 2.8
(18) : (3.6)
(NOTE)
When you use DICDRY LX-8321/KW-75 for aggressive contents (Ex; Softener include scents, Floor
cleaner include pine oil) or severe seal conditions (such as a zipper bag), application to the surface
which absorbs the adhesives constituent like the multicolored printing of ink, or the boilable pouch with
printing ink, we recommend to change a mixing ratio from DICDRY LX-8321 /KW-75 = 18 /2.8 to 18
/3.6 .
Points of concern : when increasing the hardener, the tendency of metalize transfer will increase.
Processing
DICDRY LX-8321/KW-75 can be applied at a solids content of 30-35%.
Solid content LX-8321 KW-75 EtAc Viscosity
(%) (Kg) (Kg) (Kg) (Zahn cup #3 at 25°C)
25 18 2.8 38.0 12.7 sec
30 18 2.8 28.2 14.3 sec
35 18 2.8 21.2 17.8 sec
40 18 2.8 16.0 23.8 sec
25 18 3.6 39.6 12.5 sec
30 18 3.6 29.4 13.7 sec
35 18 3.6 22.1 16.2 sec
40 18 3.6 16.7 20.5 sec
Items mentioned in this information are for customers’ reference and
limited to certain examples although they are based on the most
reliable data obtained by our company. It is hoped that customers
make the best use of these products after careful examination.
TECHNICAL INFORMATION
2016. 11. 24
Application weight
3.0 to 5.0g/m2 dry, depending on substrate and application.
Drying
The solvent has to be removed completely. It may become a cause of an odor when the solvents remain.
Usually, the drying temperatures are in the range of 60 to 100 °C.
Nip Temperature
A nip roller should be warmed up to 60-80 °C.
Curing
Aging is necessary at least 3 days or more at 40 oC.
Pot Life
It is 24 hours when it is kept at less than 25oC with an airtight container.
Items mentioned in this information are for customers’ reference and
limited to certain examples although they are based on the most
reliable data obtained by our company. It is hoped that customers
make the best use of these products after careful examination.
TECHNICAL INFORMATION
2016. 11. 24
Shelf Life
DICDRY LX-8321/KW75 can be stored for up to 6 months in the original unopened packaging, when
stored below 30 °C.
Bond Strength
Coating weight : 3.0g/m2 Aging : 3days at 40ºC
Bond strength : N/15mm, tear speed 300mm/min, peel angle T-type, TD (N/15mm)
Substrates Mixing ratio 18 / 2.8 Mixing ratio 18 / 3.6
PET / LLDPE PET F PET F
Nylon / LLDPE Nylon F Nylon F
PET / VMPET 2.4 (VM/ad) 1.7-0.6 (VM/PET)
PET- Al Foil // LLDPE 7.5 (AL/ad) 6.8 (AL/ad)
Remarks : F ; Film fracture
VM/ad ; Peeling between VM layer and adhesives
VM/PET ; Peeling between layer VM layer and PET
AL/ad ; Peeling between AL and adhesives
Contents resistance
Following data are the result measured by the mixing ratio 18 / 2.8
Coating weight : 3.0g/m2 Aging : 3days at 40oC
Bond strength : N/15mm, tear speed 300mm/min, peel angle T-type, TD
Content : Molto Ultra SB-AB (Fablic softener)
Film structure : Polyester 12um / AL foil 9um / LLDPE 60um
Test condition : 3days at 40 oC (dipping test)
Substrates Before test 3day at 40℃
Polyester-AL foil // LLDPE 7.5 (AL/ad) 3.5 (AL/ad)
Remarks ; AL/ad : Peeling between AL and adhesives
Content : Wipol(Floor cleaner)
Film structure : Polyester 12um / AL foil 9um / LLDPE 60um
Test condition : 3days at 25ºC (dipping test)
Substrates Before test 3day at 25℃
Polyester-AL foil // LLDPE 7.5 (AL/ad) 3.2 (AL/ad)
Remarks : AL/ad : Peeling between AL and adhesives
Items mentioned in this information are for customers’ reference and
limited to certain examples although they are based on the most
reliable data obtained by our company. It is hoped that customers
make the best use of these products after careful examination.
TECHNICAL INFORMATION
2016. 11. 24
Contents resistance
Following data are the result measured by the mixing ratio 18 / 3.6
Coating weight : 3.0 g/m2 Aging : 3days at 40 oC
Bond strength : N/15mm, tear speed 300mm/min, peel angle T-type, TD
Content : Molto All in 1(Fablic softener)
Film structure :PET 12um / VMPET 12um / LLDPE 60um
Test condition : 3days at 60 oC (dipping test)
VM disappearance
Substrates Before test 3day at 60 oC
3days at 60 oC
PET/VMPET // LLDPE PET-F PET-F Not disappeared
Remarks ; F ; film fracture
Content : Sunsilk Black Shine(Hair conditioner)
Film Structure :PET 12um / VMPET 12um / LLDPE 60um
Test condition : 3days at 60 oC (pouch test)
VM disappearance
Substrates Before test 3day at 60 oC
3days at 60 oC
Polyester/VMPET // LLDPE PET-F PET-F Not disappeared
Remarks ; F ; film fracture
Content : Wipol(Floor cleaner)
Film structure :Nyl 15um / LLDPE 60um
Test condition : 3days at 60 oC (pouch test)
Substrates Before test 3day at 60 oC
Nyl // LLDPE Nyl-F Nyl-F
Remarks ; F ; film fracture
* All data, statements and recommendations herein are based upon information we believe to be reliable,
but are made without any representation, guarantee, or warranty of accuracy and are made with
reservation of all patent rights.
Items mentioned in this information are for customers’ reference and
limited to certain examples although they are based on the most
reliable data obtained by our company. It is hoped that customers
make the best use of these products after careful examination.
