TECHNICAL DATASHEET BD 1250 U
BD 1250 U
POWERFULL “U” MAIN DATA
Continuous power (PRP) 1250.00 kVA
Continuous power (PRP) 1000.00 kW
Emergency power (E.P.) 1400.00 kVA
Emergency power (E.P.) 1120.00 kW
VAC - HZ - cos(fi) 400 - 50 - 0.8
DIMENSIONS AND WEIGHT
For illustrative purposes only
ENGINE
Description BAUDOUIN
Engine model 12M33G1400/5
Cylinders 12 ALTERNATOR
RPM speed 1500 Description STAMFORD
Cubic capacity 39.20 l Alternator model PI734C
Air intake Turbocharged P.R.P. Power 1550 kVA
Standard voltage 24 Vdc E.P. Power 1660 kVA
Optional voltage Vdc Connection Star
Sae 0-18 Phases 3FN
BMEP 2469 kPa Winding 312
Cooling Water Terminal Number 6 nr.
Flywheel P.R.P. Power net 1100.0 kW IP Protection 23
Flywheel Stand-by Power net 1210.0 kW Electronic regulator MX341
Fuel Cons. at 100% (E.P.) 288.8 l/h Precision 1 ±%
Fuel Cons. at 100% (P.R.P) 258.6 l/h
BASEFRAME
Fuel Cons. at 75% (P.R.P.) 190.7 l/h
Model ST60
Fuel Cons. at 50% (P.R.P.) 129.2 l/h
Standard tank 0 l
Fuel Cons. at 25% (P.R.P.) 71.2 l/h
Optional tank 0 l
Electronic regulator Standard
Oversized tank* 0 l
Precision class G3
Oil quantity 160.0 l CANOPY & SILENCER
Engine Antifreeze capacity 83.0 l Canopy model SENZA COFANO
Radiator type TE Silencer model MS 45
Heat from radiator 1800.9 kW Silencer outlet diameter 219 mm
Standard reference conditions temperature 25°C, altitude 100m asl, relative humidity 30%,
Heat from exhaust 0.0 kW atmospheric pressure 100 kPa (1 bar), power factor 0.8 lag, balanced load - non
distortional. Fuel consumption is nominal and refers to specific weight 0,850kg/l. Sound
Heat from radiation 0.0 kW power values refer to free field conditions: the installation site may influence the values.
Dimensions, weights and other specifications contained in the technical data sheet and
Exhaust temperature 550 °C related attachments are nominal, subject to tolerances and refer to the model with standard
equipment; any optional and additional equipment/accessories can modify weight,
Portata Raffreddamento 1140.0 m³/min dimensions, performance. P.R.P. Prime Power-Continuous power at variable load:
The power that a genset can supply in continuous service at a variable load for an unlimited
Combustion air flow 83.5 m³/min number of hours per year while respecting the maintenance intervals established in the
environmental conditions stated by the Manufacturer. according to ISO8528-1. The average
Exhaust gas flow 237.0 m³/min power supplied over time and any applicable overload must be less than the percentages
stated by the Manufacturer. E.P. - Emergency power: This is the maximum power that a
TA Luft N generating set can deliver for a limited number of hours per year while complying with the
maintenance frequency stipulated under the environmental conditions set by the
TA Luft/2 N Manufacturer. The number of hours per year is determined by the engine manufacturer. The
average power output over time must be lower than the percentages set by the engine
EPA N manufacturer. Overloading is not allowed.
Stage N
The data contained in this document is nominal and refers to the standard equipped model and is not binding. Visa S.p.A. reserves the
right to revise the information without notice per our policy of continuous product development and improvement.
VISA S.p.A. s.u. - ITALY- CERTIFIED ISO 9001-2015, 14001-2015, 3834 and EN 1090 - www.visa.it
Visa S.p.A. s.u. is subject to management and coordination of IPG S.p.A., via dei Mercanti 12 - Milano Company registration Office n. 12616930967
Powered by TCPDF (www.tcpdf.org)
