Product data sheet
Specifications
current control relay, Harmony
Control Relays, 5A, 2CO,
overcurrent or undercurrent
detection, 0.15…15A, 24…240V
AC DC
RM35JA32MW
Product availability: Stock - Normally stocked in distribution
facility
Price*: 177.00 USD
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Main
Range of Product Harmony Control Relays
Relay Type Current control relay
Product or Component Type Current control relay
Relay name RM35JA
Relay monitored parameters Overcurrent or undercurrent detection
time delay Adjustable 0.3...30 s, 0 + 10 % Tt- time delay upon fault
Adjustable 1...20 s, 0 + 10 % Ti- inhibition time delay upon startup
Switching capacity in VA 1250 VA
Minimum switching current 10 mA 5 V DC
Maximum switching current 5 A AC/DC
Maximum power consumption in 3.5 VA AC
VA
Measurement range 150 mA...15 A current AC/DC
Utilisation category AC-12 IEC 60947-5-1
AC-13 IEC 60947-5-1
AC-14 IEC 60947-5-1
AC-15 IEC 60947-5-1
DC-12 IEC 60947-5-1
DC-13 IEC 60947-5-1
DC-14 IEC 60947-5-1
Contacts type and composition 2 C/O
Complementary
Reset time 1500 ms time delay
Maximum switching voltage 250 V AC/DC
Supply voltage limits 20.4…264 V AC/DC
operating voltage tolerance - 15 % + 10 % Un
Maximum power consumption in 0.6 W DC
W
Control circuit frequency 40...70 Hz +/- 10 %
Resistance across terminals 0.005 Ohm E3-M terminals
0.015 Ohm E2-M terminals
0.05 Ohm E1-M terminals
Output contacts 2 C/O
Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price.
Dec 24, 2024 1
Nominal output current 5A
Maximum measuring cycle 30 ms measurement cycle as true rms value
Hysteresis 5…50 % threshold setting
delay at power up 0.3 s
Measurement accuracy +/- 10 % of the full scale value
Repeat accuracy +/- 0.5 % input and measurement circuit
+/- 2 % time delay
Measurement error 0.05 %/°C with temperature variation
1 by volt over the whole range with voltage variation
Polarity No DC
Threshold setting 10...100 %
Marking CE : EMC 89/336/EEC
CE : 73/23/EEC
Overvoltage category III conforming to IEC 60664-1
Insulation resistance > 500 MOhm 500 V DC between supply and relay output IEC 60255-5
> 500 MOhm 500 V DC between measurement and relay output IEC 60664-1
> 1 MOhm 500 V DC between supply and measurement IEC 60255-5
> 500 MOhm 500 V DC between supply and relay output IEC 60664-1
> 500 MOhm 500 V DC between measurement and relay output IEC 60255-5
> 1 MOhm 500 V DC between supply and measurement IEC 60664-1
[Ui] rated insulation voltage 250 V IEC 60664-1
Operating position Any position without derating
Connections - terminals Screw terminals, 1 x 0.5...1 x 4 mm² AWG 20...AWG 11) solid without cable end
Screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end
Screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 12) flexible with cable end
Screw terminals, 2 x 0.2...2 x 1.5 mm² AWG 24...AWG 16) flexible with cable end
Tightening torque 5.3…8.9 lbf.in (0.6…1 N.m) IEC 60947-1
Housing material Self-extinguishing plastic
Local signalling for power ON LED (green)
for relay ON LED (yellow)
Mounting support 35 mm symmetrical DIN rail conforming to IEC 60715
Electrical durability 100000 cycles
Mechanical durability 30000000 cycles
Operating rate <= 360 operations/hour full load
[Un] rated nominal voltage 24...240 V AC/DC 50/60 Hz, non self-powered
Safety reliability data MTTFd = 296.8 years
B10d = 270000
Contacts material Cadmium free
Width 1.4 in (35 mm)
Control Type Without test button
Net Weight 0.29 lb(US) (0.13 kg)
Environment
Immunity to microbreaks 50 ms
Electromagnetic compatibility Emission standard for industrial environments conforming to IEC 61000-6-4
Emission standard for residential, commercial and light-industrial environments
conforming to IEC 61000-6-3
Immunity for industrial environments conforming to NF EN/IEC 61000-6-2
Standards IEC 60255-6
2 Dec 24, 2024
Product Certifications GL
UL
GOST
C-tick
CSA
Ambient Air Temperature for -40…158 °F (-40…70 °C)
Storage
Ambient air temperature for -4…122 °F (-20…50 °C)
operation
Relative humidity 95 % 131 °F (55 °C) IEC 60068-2-30
Vibration resistance 0.35 mm (f= 5…57.6 Hz) conforming to IEC 60068-2-6
1 gn (f= 57.6…150 Hz) conforming to IEC 60255-21-1
Shock resistance 15 gn 11 ms IEC 60255-21-1
IP degree of protection IP20 IEC 60529 terminals)
IP30 IEC 60529 casing)
Pollution degree 3 IEC 60664-1
Dielectric test voltage 2 kV AC 50 Hz, 1 min IEC 60255-5
2 kV AC 50 Hz, 1 min IEC 60664-1
Non-dissipating shock wave 4 kV IEC 60255-5
4 kV IEC 60664-1
4 kV IEC 61000-4-5
Ordering and shipping details
Category US10CP222380
Discount Schedule 0CP2
GTIN 3389119405225
Returnability Yes
Country of origin CA
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 1.77 in (4.500 cm)
Package 1 Width 3.15 in (8.000 cm)
Package 1 Length 3.74 in (9.500 cm)
Package 1 Weight 4.797 oz (136.000 g)
Unit Type of Package 2 S03
Number of Units in Package 2 48
Package 2 Height 11.81 in (30.000 cm)
Package 2 Width 11.81 in (30.000 cm)
Package 2 Length 15.75 in (40.000 cm)
Package 2 Weight 16.074 lb(US) (7.291 kg)
Contractual warranty
Warranty 18 months
Dec 24, 2024 3
Environmental Data
Schneider Electric aims to achieve Net Zero status by 2050 through supply chain
partnerships, lower impact materials, and circularity via our ongoing “Use Better, Use
Longer, Use Again” campaign to extend product lifetimes and recyclability.
Environmental Data explained
How we assess product sustainability
Environmental footprint
Carbon footprint (kg CO2 eq,
58
Total Life cycle)
Environmental Disclosure Product Environmental Profile
Use Better
Materials and Substances
Packaging made with recycled
Yes
cardboard
Packaging without single use
Yes
plastic
Pro-active compliance
EU RoHS Directive (Product out of EU RoHS legal
scope)
5e3fdf99-611b-4d07-
SCIP Number
ad17-6eba84ab488b
REACh Regulation REACh Declaration
China RoHS Regulation China RoHS declaration
4 Dec 24, 2024
WARNING: This product can
expose you to chemicals
including: Lead and lead
compounds, which is known
to the State of California to
California proposition 65
cause cancer and birth
defects or other reproductive
harm. For more information
go to
www.P65Warnings.ca.gov
Use Again
Repack and remanufacture
Circularity Profile End of Life Information
The product must be
disposed on European Union
WEEE markets following specific
waste collection and never
end up in rubbish bins.
Take-back No
Dec 24, 2024 5
Product data sheet RM35JA32MW
Dimensions Drawings
Current Control Relays
Dimensions and Mounting
6 Dec 24, 2024
Product data sheet RM35JA32MW
Connections and Schema
Current Control Relays
Wiring Diagram
Dec 24, 2024 7
Product data sheet RM35JA32MW
Application Schemes
Example: Detection of Jamming on a Crusher (Overcurrent Function)
Current measured ≤ 15 A
Current measured > 15 A
8 Dec 24, 2024
Product data sheet RM35JA32MW
Technical Description
Function Diagrams
Undercurrent Detection
Without memory ("No Memory" mode)
With memory ("Memory" mode)
Overcurrent Detection
Without memory ("No Memory" mode)
With memory ("Memory" mode)
Legend
Ti Starting inhibition time delay
Tt Time delay after crossing of threshold
Un Supply voltage
I Monitored current
H Hysteresis
I> Overcurrent threshold
I< Undercurrent threshold
11-12/11-14, 21-22/21-24 Output relay connections
Relay status: black color = energized.
NOTE: In "Memory" mode, the relay opens when crossing of the threshold
is detected and then stays in that position. The power supply voltage must
be switched off to reset the product.
Dec 24, 2024 9
Product data sheet RM35JA32MW
Technical Illustration
Dimensions
10 Dec 24, 2024
Product data sheet RM35JA32MW
Image of product / Alternate images
Alternative
Dec 24, 2024 11
Product data sheet RM35JA32MW
12 Dec 24, 2024
Product data sheet RM35JA32MW
Dec 24, 2024 13
Product data sheet RM35JA32MW
Image of product in real life situation
14 Dec 24, 2024
