Terminator RPG - Fan Stat Archive By Craig Atkins 07/09/2022

TERMINATOR RPG - FAN STAT ARCHIVE

TERMINATOR RPG - FAN STAT ARCHIVE 1
T-1 PROTOTYPE BATTLEFIELD ROBOT (T3: Rise of the Machines)
CYBER RESEARCH SYSTEMS AUTONOMOUS GROUND OFFENSIVE SYSTEM 2
T1 BATTLEFIELD ROBOT (Salvation)
CYBERDYNE SYSTEMS AUTONOMOUS GROUND ASSAULT VEHICLE 3
T-888 (The Sarah Connor Chronicles)
CYBERDYNE SYSTEMS SERIES 800 INFILTRATION UNIT 4
T-1000 (T2: Judgement Day)
CYBERDYNE SYSTEMS SERIES 1000 INFILTRATION UNIT 5

1
Terminator RPG - Fan Stat Archive By Craig Atkins 07/09/2022

T-1 PROTOTYPE BATTLEFIELD ROBOT

CYBER RESEARCH SYSTEMS AUTONOMOUS GROUND OFFENSIVE

SYSTEM

The first Terminator class robot and a

Hunter-Killer Tank prototype developed by Cyber
Research Systems, possibly based on patents
obtained from Cyberdyne Systems, and building
on the limited success of the abandoned
S.A.I.N.T. programme from the now defunct NOVA
Laboratories. Designed for extreme combat, the
Series 1 was built to clear battlefields of enemy
troops with its powerful weaponry. Heavily
armored and armed with two heavy rotary
machine guns. However, the exposed hydraulics
system and weak neck connector present
potential flaws in this design.

2
Terminator RPG - Fan Stat Archive By Craig Atkins 07/09/2022

T1 BATTLEFIELD ROBOT
CYBERDYNE SYSTEMS AUTONOMOUS GROUND ASSAULT VEHICLE

The successor to the T-1 prototype, this improved

T-1 (now using the Cyberdyne manufacturing
designation) incorporates heavier armor plating
and a more streamlined design to eliminate some
of it's predecessors weaknesses. The additional
weight incorporated into it's design has meant its
maximum speed has decreased.
This unit is the first to be mass produced in
converted automobile factories in all localities that
Skynet is able to gain a presence, including the
USA and Russia.
Due to the relatively simple design, and hard
wearing nature of the build, these units continue
to serve Skynet well into the second decade of
the war and beyond.

3
Terminator RPG - Fan Stat Archive By Craig Atkins 07/09/2022

T-888
CYBERDYNE SYSTEMS SERIES 800 INFILTRATION UNIT

The T-888, or “triple eight” or just “trip eight”, phosphorus coating that reacts with oxygen if the
Model Terminator is manufactured with a Colton chip is exposed to the air. It is unclear which
based alloy and is stronger, faster, and more version of Skynet implemented this design
resilient to damage than its predecessors. The change and in which timelines T-888 CPUs were
T-888s are built primarily for infiltration but have protected from removal in this way.
also become the foot soldiers of Skynet 2.0, and
As long as the CPU remains in place a T-888 can
latterly Skynet 1.0 due to shifts in the timeline,
maintain remote control of its torso if the head
and their metal endoskeletons can be seen
becomes separated. It is estimated that the range
wherever Skynet's interest lies. Skynet 2.0 and its
of this contact is up to 50 miles, but this has not
predecessor have made excessive use of the
been confirmed. There are also rumours that
T-888 in time incursion missions, either for direct
T-888s have a bladed attachments installed on
termination or for targeted infiltration and to
their thighs that can be used to decapitate
assume the identity of specific individuals from the
resistance fighters.
past. Many of these incursions were uncovered
between 2008 and 2009 as several machine
factions sought to gain future advantages during
this time period.
Although some infiltrator models were used for
one shot missions with read only CPUs, most
models were programmed for longer term
missions, with their CPUs set in read/write mode.
These models were able to adapt to changing
circumstances to ensure completion of their
missions, this is especially beneficial if an
infiltrator arrives in the wrong target time period.
This was coupled with improvements in
anatomical accuracy to enable T-888s to fully
pass as human and even form romantic
relationships over a number of years. The T-888
chassis design is one of the first to be tailored to
the size and bulk of the desired flesh-sheath. This
allows for a greater variety of infiltrators; ranging
from a 6’4” muscle-bound antagonist to a petite 5’
ballet dancer, so you never know who might be an
advanced machine from the future.
Early versions of the T-888 were prone to capture
and reprogramming by the human resistance, to
such an extent that most resistance bases in 2027
had at least one ‘metal’ in residence. One T-888
was even given command of a fully active
submarine until it was deactivated whilst
attempting to carry out its orders. Later versions
included a CPU self-destruct modification, a

4
Terminator RPG - Fan Stat Archive By Craig Atkins 07/09/2022

T-1000
CYBERDYNE SYSTEMS SERIES 1000 INFILTRATION UNIT

The T-1000 is an advanced infiltrator model GLITCH table below (or feel free to come up with
created using a mimetic polyalloy, or liquid metal. your own cool ideas);
This metal was developed by Skynet through trial
1-4: The T-1000 is unable to keep it's shape and will
and error, and is perhaps the result of a failed pick up the texture and colours of any material it
experiment to create the most versatile alloy for touches. It is a Difficulty 8 Detect skill check to spot.
standard terminator units. With this metal Skynet is
able to manufacture highly advanced units, 5-6: The T-1000 is unable to fully access its vocal
capable of taking on the likeness of any resistance processor and can only communicate in abstract
sounds.
fighter they come across. The T-1000 is the
pinnacle of Skynet 1.0s Infiltrator program, and 7-8: The T-1000 cannot fully form into a humanoid
came on line shortly before the resistance's big shape and has missing features or limbs.
push against Skynet 1.0 in 2029. The T-1000 was
9-10: The T-1000 cannot hold it's shape and keeps
created in low numbers due to the limited changing between recent forms. Roll a D10 each
availability of this new alloy, and perhaps because round, on an even number the T-1000 must change
of Skynet’s fear that the T-1000s enhanced shape.
adaptive learning and autonomy could lead a
T-1000 to follow its own agenda rather than that of
its creator.
The T-1000 is able to change shape to disguise
itself as any person or object that it can mimic with
its mass, even thinning itself out to cover larger
surface areas. This unit can also create primitive
stabbing weapons, or even Javelins out of itself,
and is able to reabsorb parts of itself that have
separated, calling these disparate parts back over
a distance of up to 50km. It is unknown how much
control the T-1000 has if parts of it become
separated but the resistance fears these parts can
be tracked pretty accurately by the T-1000 if it
purposely leaves parts of itself on a resistance
asset.
The T-1000s advanced healing abilities make it
extremely difficult to stop and only extreme
temperatures can disable a T-1000 long-term and
even then it is unclear if the mimetic polyalloy can
return to function once the extreme temperature
has abated, most resistance fighters do not hang
around to find out. Acid may have a greater effect
but this has yet to be tested. If you encounter a
T-1000 the best thing to do is run, run as fast as
you can.
A T-1000 reduced to 0 Hit Points will likely be
shattered into many pieces. As it starts to reform it
will regain 2D10 Hit Points each round, until it
recovers 75% or more Hit Points the T-1000 will be
affected by a 'glitch', which could alert victims to it's
infiltrator status. Roll 1D10 and consult the