Atlas Plan Technical Specifications FALL 2024 Technical specifications

Technical features Requirements for nominal size N

162x324 cm - 633/4”x1271/2”
159x324 cm - 623/4”x1271/2”
160x320 cm - 63”x127”
Rectified
Not Rectified
N ≥ 15 cm Matte
Polished Matte
Silk Hammered Silk Polished
(%) (mm) Satin Hammered
Leathered

Length and width ± 0,3 (*) ± 1 (*) N.A. Suitable for

Suitable for
Thickness ± 5 (**) ± 0,5 (**) Suitable for
Conforme

Technical specification
Straightness of sides ± 0,3 (***) ± 0,8 (***) N.A. Suitable for
Regularity ISO
characteristics 10545-2
Rectangularity (Measurement only
± 0,3 (****) ± 1,5 (****) N.A. Suitable for
on short edges when L/l ≥ 3)

c.c. ± 0,4 c.c. ± 1,8

Surface flatness e.c. ± 0,4 e.c. ± 1,8 Suitable for Suitable for
w. ± 0,4 w. ± 1,8
ISO
Ev ≤ 0,5% Individual max 0,6% ≤ 0,1 % ≤ 0,1 %
Structural 10545-3
Water absorption
characteristics ASTM Requirement ANSI A137.1
≤ 0,5 % ≤ 0,5 %
C373-18 Water Absorption Max ≤ 0,5%

S ≥ 700 N S ≥ 1300 N 12 mm -> S ≥ 3500N

Breaking strength S ≥ 1000N
ISO for thickness < 7,5mm for thickness ≥ 7,5mm 20 mm -> S ≥ 10000N
Bulk 10545-4
mechanical Modulus of rupture R ≥ 35 N/mm2 R ≥ 40 N/mm2 R ≥ 40 N/mm2
characteristics
162x324 cm - 633/ 4”x127 1/ 2” 159x324 cm - 623/ 4”x127 1/ 2” 160x320 cm - 63”x126” Impact resistance, as coefficient of restitution
ISO
10545-5
Declared value ≥ 0,55 ≥ 0,55
NOT REC T IFI ED SL AB NOT REC TIFIE D SL A B REC TI FI ED MON OCA LI B ER
Surface
Resistance to deep abrasion of unglazed tiles ISO
mechanical ≤ 175 mm3 Suitable for Suitable for
(removed volume) 10545-6
characteristics
ISO
Coefficient of thermal linear expansion Declared value ≤ 7 MK-1 ≤ 7 MK-1
10545-8
ISO
Thermal and Thermal shock resistance Pass according to EN ISO 10545-1 Resistant Resistant
10545-9
hygrometric
characteristics ISO
Moisture expansion (in mm/m) Declared value ≤ 0,01% (0,1mm/m) ≤ 0,01% (0,1mm/m)
10545-10
ISO Resistant Resistant
Frost resistance Pass according to EN ISO 10545-1
10545-12 Resiste Resiste

Bond strength/adhesion for improved EN ≥ 1,0 N/mm2 ≥ 1,0 N/mm2

Declared value
Physical cementitious adhesives 1348 (Class C2 - EN 12004) (Class C2 - EN 12004)
properties
A1 without fiberglass - A2 with
Reaction to fire - A1 or Afl A1 - A1fl
fiberglass

Resistance to household chemicals and

Minimum Class B (B for unglazed tiles) A A
swimming pool salts
ISO
Resistance to low concentrations 10545-13
Declared Class LA LA
of acids and alkalis
Chemical Resistance to high concentrations
Declared Class HA HA - HA HA -
characteristics of acids and alkalis
ISO
Resistance to staining Declared Class 5 5
10545-14

Release of dangerous substances: ≤ 0,01 mg/dm2 Cd ≤ 0,01 mg/dm2 Cd

ISO 10545-15 Declared value
Cadmium (in mg/dm2) and Lead (in mg/dm2) ≤ 0,1 mg/dm2 Pb ≤ 0,1 mg/dm2 Pb

DIN EN 16165
ANNEX B
Shod Ramp Test Declared Class - - - - R9 N.C.
(EX DIN
51130)
Complies with EN 14411 (ISO 13006) Appendix G Group Bla DIN EN 16165
ANNEX A
Barefoot Ramp Test Declared Class - - - - A -
(EX DIN
Safety 51097)
characteristics
(1)(2) D.M. 236/89 dated 14/06/89 > 0,40 > 0,40
B.C.R.A. >0,40 for leather sliding element on dry flooring dry dry
*
( )
The permissible deviation, in % or mm, of the average size for each tile (2 or 4 sides) from work size (WS). Coefficient of friction (COF) - - - -
Rep. CEC/81 >0,40 for hard rubber sliding element > 0,40 < 0,40
**
( )
The permissible deviation, in % or mm, of the average thickness for each tile from the work size thickness (WS). on wet flooring wet wet
(
***) The maximum permissible deviation from straightness, in % or mm, related to the corresponding work sizes (WS). wet dry
Dynamic coefficient of friction (DCOF) ANSI A 326,3 - - - - - DCOF DCOF
(
****) The maximum permissible deviation from rectangularity, in % or mm, related to the corresponding work sizes (WS). > 0,42 > 0,42
c.c. The maximum permissible deviation from centre curvature, in % or mm, related to diagonal calculated from the work sizes (WS).
UNI EN
e.c. The maximum permissible deviation from edge curvature, in % or mm, related to the corresponding work sizes (WS). Resistance to scratching - CEN/TS 16209 Class A CEN/TS 16209 Class A
15186:2012 met.B
w. The maximum permissible deviation from warpage, in % or mm, related to diagonal calculated from the work sizes (WS).
(1) Determination of slip resistance of pedestrian surfaces; it does not cover sports surfaces and road surfaces for vehicles (skid resistance). Tendency to retain dirt UNI 9300:2015 - No visible change (5) No visible change (5)
(2). Anti-slip performance is guaranteed at the time of delivery of the product.
UNI EN
(3). However, tiles with a DCOF of 0.42 or greater are not necessarily suitable for all projects. The specifier shall determine tiles appropriate Surface resistance to cold liquids - CEN/TS 16209 Class A CEN/TS 16209 Class A
12720:2013
for specific project conditions, considering by way of example, but not in limitation, type of use, traffic, expected contaminants,
UNI EN
expected maintenance, expected wear, and manufacturers’ guidelines and recommendations.” Surface resistance to wet heat - CEN/TS 16209 Class A CEN/TS 16209 Class A
12721:2013
(4). For further details, please refer to outdoor design general catalogue.
UNI EN
(5). Only for products with 20 mm thickness. Surface resistance to dry heat - CEN/TS 16209 Class A CEN/TS 16209 Class A
12722:2013

ISO 4211- Maximum drop height Maximum drop height

Assessment of resistance to impact -
4:1988 according to thickness according to thickness