All data, images and technical characteristics contained in this leaflet are subject to modification as related to the technological
development of products and constitute no contractual bond - MKT_EXP_DS_EDL 2in/1out - 01/03/11 EDL 2 inputs / 1 output addressable module with isolator
ANALOGIC
EDL module is an addressable interactive analogical interface
device, certified in respect of European product standard EN 54-17
and En 54-18.
It is endowed with agreement CE mark according to ZA directive
enclosure “The Construction Products” 89/106/CEE.
EDL detector is compliant to European directive 2002/95/CE,
concerning the use of dangerous substances inside electrical
products, in particular about the use of lead.
EDL module is making to connect to addressable analogical CA
family fire panel loop.
The isolator inside the EDL detector increases the reliability of the
installation in any circumstance (line opening, short circuit, etc).
EDL module is equipped with 2 inputs and 1 controlled output, in
a flash mounting box and covers 2 addresses.
The inputs are able to control the starting or ending stroke state
of a connected device, which have free contacts.
TECHNICAL CHARACTERISTICS
Line cut, short circuit, all contacts off, only one contact on is
supervised. Power Supply: 15Vdc ÷28Vdc
Standby consumption: <500 µA @ 24Vdc
The output is, instead, voltage controlled at 24Vdc or 48Vdc,
Operational consumption: <8mA @ 24Vdc w/LED ON
according to the external module power supply.
External power supply: 24Vdc ÷ 48Vdc supervised
and redundant
To this output is possible to connect defferent devices like flashes,
door retainer, etc. Inputs: 2 free contacts
Line Control: line cut, short circuit,
all contacts OFF, only one
The max line length is depending of external power supply, of contact ON (parallel
connection)
electrical cable characteristics and of number of connected
All contacts OFF, all
devices. contacts ON (series
connection)
Max Length: 1 Km
The electronic addressing of module can be made on site or in
office using a dedicated tool. Outputs: 1 voltage controlled
Voltage: 24Vdc or 48Vdc
Current: 700 mA max
The addressing operation, combined with some automatic Line control: Standby, command, line
procedures, allows verifying the installation and wiring of cut, short circuit
detector saving time. Max length: Variable according to
electrical parameters
Operational Temp.: -10°C ÷ +55°C
Operational Humidity: ≤ 95% HR
Storage Temp.: +10°C ÷ +50°C
Storage Humidity: ≤ 85% HR
Weight: 950 g
Dimensions (HxLxP): 250 x 180 x 100 mm
IP protection: IP 54
Colour: Gray
CE Certificate: Pending
DEF International Operations
Parc d’Activités du Moulin de Massy - 9, rue du Saule Trapu BP211 - 91882 Massy Cedex France
Tel: 0033 (0)1 60 13 81 66 - Fax: 0033 (0)1 60 13 81 49 -
[email protected] - www.def-online.net
