DENSO 2CR_2DR_B66_B67_BW8_BX4_BN6-8591A-XX
2023 - 07
YAMAHA
Ver.: 01
User manual
1 DENSO
2CR/2DR/B66/B67/BW8/BX4/BN6-8591A-XX
YAMAHA
1.1 PLUGIN 0834: NEW TRASDATA
This manual is the property of DIMSPORT S.R.L.
Original instructions in Italian 1
DIMSPORT S.R.L. - 15020 Serralunga di Crea (AL) - Tel.: +39 0142 9552 - Web: www.dimsport.it
DENSO 2CR_2DR_B66_B67_BW8_BX4_BN6-8591A-XX
2023 - 07
YAMAHA
Ver.: 01
User manual
1.2 CONNECTIONS
1.2.1 LOOSE WIRES CONNECTION - ECU READING
ATTENTION
After making all the connections, connect a stabilized power supply to the New Trasdata and make sure
that the POWER LED (red) is on.
To communicate correctly with the control unit, it is necessary to use the F32GN037C/D and F34NTF53 cables.
WIRE COLOUR DESCRIPTION
Red +12 V
Black GND
This manual is the property of DIMSPORT S.R.L.
Original instructions in Italian 2
DIMSPORT S.R.L. - 15020 Serralunga di Crea (AL) - Tel.: +39 0142 9552 - Web: www.dimsport.it
DENSO 2CR_2DR_B66_B67_BW8_BX4_BN6-8591A-XX
2023 - 07
YAMAHA
Ver.: 01
User manual
To get access to the communication pads for the reading procedure, you must remove part of the silicon that
covers the ECU board.
After properly removing the silicon please check that the vehicle starts fine and that there are no fault codes or
warning lights on the dashboard.
This manual is the property of DIMSPORT S.R.L.
Original instructions in Italian 3
DIMSPORT S.R.L. - 15020 Serralunga di Crea (AL) - Tel.: +39 0142 9552 - Web: www.dimsport.it
DENSO 2CR_2DR_B66_B67_BW8_BX4_BN6-8591A-XX
2023 - 07
YAMAHA
Ver.: 01
User manual
PIN WIRE COLOUR
18 GREY
19 WHITE
20 BLACK
21 BROWN
22 RED
23 ORANGE
24 YELLOW
25 GREEN
This manual is the property of DIMSPORT S.R.L.
Original instructions in Italian 4
DIMSPORT S.R.L. - 15020 Serralunga di Crea (AL) - Tel.: +39 0142 9552 - Web: www.dimsport.it
DENSO 2CR_2DR_B66_B67_BW8_BX4_BN6-8591A-XX
2023 - 07
YAMAHA
Ver.: 01
User manual
1.2.2 DIRECT CONNECTION - ECU WRITING
ATTENTION
After making all the connections, connect a stabilized power supply to the New Trasdata and make sure
that the POWER LED (red) is on.
It is necessary to use the cable F34NTA13 for writing.
WIRE COLOUR DESCRIPTION
Blue CNF
Black / Yellow
RXD
Yellow
Grey / Green TXD
Red +12 V
Black GND
This manual is the property of DIMSPORT S.R.L.
Original instructions in Italian 5
DIMSPORT S.R.L. - 15020 Serralunga di Crea (AL) - Tel.: +39 0142 9552 - Web: www.dimsport.it
