Scribd
Upload
5 views

LM35 - temperature sensor program

MICROPROCESSOR

Uploaded by

priya j
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
5 views

LM35 - temperature sensor program

MICROPROCESSOR

Uploaded by

priya j
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

UNIT 4-Temperature Sensor with ADC

UNIT 5- Acquisition of Temperature Data and Serial Communication


THIS 1 PROGRAM CAN BE WRITTEN FOR 2 TOPICS

Temperature sensor ( LM35 )


#include<reg51.h>
#include<string.h>
sbit RS = P2^5;
sbit RW = P2^6;
sbit EN = P2^7;
sbit ale=P2^3;
sbitoe=P2^4;
sbit start=P2^1;
sbiteoc=P2^0;
sbitclk=P2^2;
sbitchc=P0^7; //Address pins for selecting input channels.
sbitchb=P0^6;
sbit cha=P0^5;
voiddelay(int t);
voidlcd_init(void);
voidlcd_command(char c);
voidlcd_data(char d);
voidstr(char a[]);
voidprint( long float p);
longfloat k;
unsignedlongintq,r,x,y,z;
voidtimer0() interrupt 1 // TIMER 0 interrupt ISR
{
clk=~clk;
}
voidmain() // MAIN PROGRAM
{
lcd_init(); // lcd initialization
str("!!welcome!!");
lcd_command(0x01); // clear display
str("Temp:");
lcd_command(96); //custom character (°c) display
lcd_data(0x10);
lcd_data(0x07);
lcd_data(0x08);
lcd_data(0x08);
lcd_data(0x08);
lcd_data(0x08);
lcd_data(0x07);
lcd_command(0x8b);
lcd_data(4);
eoc=1; // make eoc an input
ale=0;
oe=0;
start=0;
TMOD=0x02; // timer 0 in mode 2
TH0=0xc2; // 15khz
IE=0x82; // set timer 0 interrupt
TR0=1; // start timer 0
while(1)

chc=0; // select channel 0


chb=0;
cha=0;
ale=1; // send high to low pulse on start and ale pin
start=1;
delay(1);
ale=0;
start=0;
while(eoc==1); // wait for conversion
while(eoc==0);
oe=1;
k=P1;
lcd_command(0x85);
print(k); // send the digital data to lcd
oe=0;
}
}
voidstr(char a[]) // lcd function to display string
{
int j;
for(j=0;a[j]!='\0';j++)
{
lcd_data(a[j]);
}
}
voidlcd_init(void) // lcd initialization
{
lcd_command(0x38); //8 bit,2 line,5x8 dots
lcd_command(0x01); // clear display
lcd_command(0x0f); // display on, cursor blinking
lcd_command(0x06); //Entry mode
lcd_command(0x0c); //cursor off
lcd_command(0x80); //// force cursor to beginning of first row
}
voidlcd_command(char c)// lcd command function
{
P3=c;
RS=0;
RW=0; // select command register
EN=1;
delay(5);
EN=0;
delay(5);
}
voidlcd_data(char d)// lcd data function
{
P3=d;
RS=1; //select data register
RW=0;
EN=1;
delay(5);

EN=0;
delay(5);
}
voiddelay(int t) // delay function
{
int j;
for(j=0;j<t*1275;j++);
}
voidprint( long float p) // number display function
{
x=p*10;
if(x>=1000)
{
q=x/1000;
q=q+48;
y=(x%1000)/100;
y=y+48;
z=((x%1000)%100)/10;
z=z+48;
r=x%10;
r=r+48;
lcd_data(q);
lcd_data(y);
lcd_data(z);
lcd_data(46); //ascii value of point
lcd_data(r);
}
else
{
q=x/100;
q=q+48;
y=(x%100)/10;
y=y+48;
z=x%10;
z=z+48;
lcd_data(q);
lcd_data(y);
lcd_data(46); //ascii value of point
lcd_data(z);
r=0;
lcd_data(r);
}
}

You might also like