Eaton 9phd Industrial Ups 30 200kw General Technical Specification Rev 002
Uploaded by
Gilberto MejiaEaton 9phd Industrial Ups 30 200kw General Technical Specification Rev 002
Uploaded by
Gilberto MejiaEaton 9PHD Industrial UPS 30 - 200 kW
Technical Specification
GENERAL
Output power rating (PF 1.0) 30, 40, 50, 60, 80, 100, 120, 150, 160, 200 kW
External paralleling Up to 8 units with HotSync technology
Efficiency in double-conversion mode Up to 97%
Efficiency in Energy Saver System (ESS) Up to 99%
mode
UPS topology IGBT with PWM, double conversion
Degree of ingress protection IP23, IP33 or IP54
Ambient temperature 0°C to 40°C up to 1000m altitude, higher ratings as optional
RoHS/WEEE compliancy Yes
INPUT
Nominal voltage rating 380 V, 400 V, 415 V, 440 V or 480 V, conficurable
Input voltage with internal transformers 208 V - 690 V
Input frequency range 40 - 72 Hz
Input wiring 3ph+N+PE / 3ph+PE
Input power factor 0.99
Input THDi 100% linear load < 4,5%
Soft start for generators Yes
Internal back feed protection Yes, for rectifier and bypass lines
OUTPUT
Output wiring 3ph+N+PE / 3ph+PE
Rated output voltage 380 V, 400 V, 415 V, 440 V or 480 V, configurable
Output voltage with internal transformers 208 V - 690 V
Output frequency 50 Hz / 60Hz configurable
Output UTHD < 1% (100% linear load), < 5% (reference non-linear load)
Default overload capacity 10 min 102 – 110% load
on inverter 60 s 111 – 125% load
10 s 126 – 150% load
300 ms > 150% load
Max overload capability 60 min 102 - 110% load
on inverter 10 min 111 – 125% load
60s 126 – 150% load
300ms > 150% load
Overload capability on bypass Continuous < 125% load, 50 ms 2000% load
Rated output power factor 1.0
Load power factor range 0.8 lagging to 0.8 leading
Eaton 9PHD Industrial UPS 30 - 200 kW
BATTERY
Battery technology VRLA, Li-Ion, NiCd, Eaton Super Capacitors
Nominal battery voltage 432 V - 480 V
Maximum charging current 29.3 A, 58.6 A, 87.9 A, 117.2 A depending on model
Charging method Voltage regulated current limited with Eaton ABM technology
Boost charge function Yes
Temperature compensation Yes
Battery start option Yes
Communications
MiniSlots 4 communication bays for Web/SNMP, ModBus/Jbus & Industrial realy
Standard connectivity ports Device USB and Host USB, RS-232 service port, relay output, 5 building
alarm inputs, 1 relay output and a dedicated EPO
Accessories
Accessories for UPS Internal transformers; Vibration dampers with mounting brackets; Seismic
kit; Internal automatic transfer switch; Single feed kit; Earth fault
monitoring; 24V Emergency Power Off (EPO); Custom system and
battery voltages; Custom colors; Exhaust air management options
Accessory cabinets Industrial battery cabinets with long-life batteries; Matching transformer
cabinet for one or two transformers; External maintenance bypass switch.
COMPLIANCE WITH STANDARDS
Safety (CB certified) IEC 62040-1
EMC IEC 62040-2
Performance IEC 62040-3
RoHS EU directive 2011/65/EU
WEEE EU directive 2012/19/EU
Seismic testing NEBS GR-63-CORE, Zone 4
Due to continuous product imrovement programmes, specifications are subject to change without notice.
For product specific specifications, contact Eaton sales representatives.
