Scribd
Upload
40 views2 pages

Mac Weld Multi Stage Restriction Orifice Data Sheet

Uploaded by

kailas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
40 views2 pages

Mac Weld Multi Stage Restriction Orifice Data Sheet

Uploaded by

kailas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Revised (02/02/2023)

Multi-Stage Restriction Orifice


Designed to reduce the pressure in a process

Mac-Weld multi-stage restriction orifice is the perfect


solution when the required pressure drop is not possible
with a single plate.
Made up of multiple orifice plates, each reducing pressure with calculated
reduction steps to achieve the required drop in the pressure. A restriction
orifice run can also greatly reduce noise and vibrations, as well as flashing
or cavitation in the line. Our multi-stage restriction orifice
assembly can reduce pressure for a simple,
maintenance free and economical solution.

Design Advantages:
ƒ Reduce the pressure drop, not achievable with a single plate.
ƒ Prevents flashing, cavitation and other critical flow problems.
ƒ Single hole multistage design along with multi-hole, multi-stage
designs available.
ƒ Line sizes: 1/2” - 24”. Flange Rating: 150# - 2500#
ƒ Built to optimize the pressure drop across each stage
ƒ Suitable for both high flow/pressure liquids and gases
ƒ Bore sizing based on ASME.MFC.3M, ISO 5167 or AGA-3
ƒ Low maintenance costs

Mac-Weld Multi-Stage Restriction Orifice Assembly

Multiple internal plates with eccentric edge bores,


reducing a total of 80% pipe diameter

1324 Lougar Ave Sarnia, ON N7S 5N7 1-877-MAC-WELD (622-9353) [email protected] www.mac-weld.com
MULTI-STAGE RESTRICTION ORIFICE

.28363 in

1
1 2 3

SECTION A-A 2

.33884 in

16.688 in

.28876 in

A A

.250 in

4 4

DETAIL B
1. Orifice Plate - Eccentric Bore
2. Orifice Plate - Eccentric Bore
3. Orifice Plate - Eccentric Bore
5 5
4. Flange
5. Pipe

ƒ Prevent critical flow


ƒ Reduced noise issues, flashing and
ƒ Suitable for high levels with multi-hole
cavitation
pressure drops for plate designs
gas and liquids

Applications:
ƒ Reduce sonic flow
ƒ Reduce cavitation
ƒ Reduce noise

ƒ Bore sizing
ƒ No moving parts, designed within
ƒ Compact ASME standards ƒ Low cost solution
which greatly reduce
design when compared
maintenance costs
to control valves

Recognized globally for


our quality, service and
the ability to deliver!

1324 Lougar Ave Sarnia, ON N7S 5N7 1-877-MAC-WELD (622-9353) [email protected] www.mac-weld.com

You might also like