DESIGN AND CONSTRUCTION OF 4-LANE FLYOVER INCLUDING APPROACHES

AND SERVICE ROAD AT SANGRAMA CHOWK FROM EXISTING CHAINAGE KM

42+780 TO KM 43+440 (DESIGN CHAINAGE KM 44.294 TO KM 44.958)(PKG-1C)
PROJECT
ON SRINAGAR - BARAMULLA - URI ROAD (NH-1) UNDER 760 TF IN THE UT OF
JAMMU & KASHMIR UNDER PROJECT BEACON, BORDER ROADS
ORGANIZATION (BRO) ON EPC MODE
BORDER ROAD ORGANISATION (BRO)
CLIENT

MIRZ INFRASTRUCTURE BUILDERS PVT. LTD.

EPC CONTRACTOR

IMB ENGINEERING SOLUTIONS

PROOF CHECKER

DESIGN REPORT OF RS WALL

0 19-04-23 FIRST SUBMISSION NS MS IS

REV. DATE DETAIL PREPARED CHECKED REVIEW
NOTE ON DESIGN OF REINFORCED SOIL WALL
PREAMBLE:

FOR DESIGN AND CONSTRUCTION OF 4-LANE FLYOVER INCLUDING APPROACHES AND SERVICE
ROAD AT SANGRAMA CHOWK FROM EXISTING CHAINAGE KM 42+780 TO KM 43+440 (DESIGN
CHAINAGE KM 44.294 TO KM 44.958)(PKG-1C) ON SRINAGAR - BARAMULLA - URI ROAD (NH-1) UNDER
760 TF IN THE UT OF JAMMU & KASHMIR UNDER PROJECT BEACON, BORDER ROADS ORGANIZATION
(BRO) ON EPC MODE
The solid approaches are to be retained using Reinforced Soil (RS) Walls. It is proposed to build the walls using
Geostrips/Steel reinforced soil wall system. Geostrips/Steel reinforced soil wall comprises of thin pre-cast
concrete panels, polymeric/Steel strips Geostrips, connected to the pre-cast units at the face of the structure
using Cavity Connector and passing around anchor bars at the rear, the earth fill and accessories. Refer Figure1.

The Geostrips comprise of tendons made from high tenacity polyester fibers concentrated in ten separated
bundles and encased in a durable polyethylene sheath. The strength of the material is in the fibers whereas the
sheath forms the size and shape of the anchor and provides protection to the polyester coreyarns.

The design principles, design considerations such as properties of fill material, loading on RS Wall and partial
material factors for Geostrips/Steel considered in design have been presented herein.

DESIGN PRINCIPLES:
The design of Reinforced Soil Retaining Walls follow the principals involved in conventional soil retaining
structure, however, reinforced soil structures require additional consideration with respect to soil / reinforcement
interaction.

The design involves checks for external and internal stability. The external stability covers the basic stability of
the reinforced soil structure as a unit, whilst internal stability analysis examines the effectiveness of the
geosynthetic reinforcement to hold the reinforced soil mass together so that the geosynthetic layers and soil
function as a monolithic block.

Figure 1. Components of Reinforced Soil Wall

EXTERNAL STABILITY:

The external stability is evaluated by assuming that the reinforced soil mass acts as a rigid body. It must resist
the earth pressure imposed by the backfill retained by the reinforced soil mass and any surcharge loads.
Potential external modes of failure considered are:

- Sliding
- Overturning
-Bearing Capacity of foundation

INTERNAL STABILITY:

Internal Stability basically considers two failure possibilities:

- Rupture of reinforcement
- Pullout of reinforcement

Initially the overall geometry of the wall is assumed based on standard guidelines. Thereafter necessary checks
for external and internal stability are carried out. Based on the results the reinforcement layout is optimized.

Design has been carried out using BS 8006: 2010/IRC SP 102-2014. Code of Practice for Strengthened/
reinforced soils and other fills. BS: 8006 advocates limit state, principles for design of reinforced soil wall,
wherein, partial factors are applied on materials and loads and adequate safety margins are ensured under
various load combinations. As per the guidelines given in BS:8006-2010 design has been carried out for three
load combinations i.e., Load combination A, B, and C using partial load factors given in Table 17.

The seismic design and the surcharge design are not covered in BS: 8006. Hence, the seismic design and
surcharge design has been carried out based on the guidelines given FHWA standard.
DESIGN CONSIDERATIONS:
SOIL PROPERTIES:
The properties of fill as well as foundation material considered in design are:

REINFORCED & RETAINED SOIL

Bulk density Cohesion Friction Angle

20.00 KN/m3 0 30̊̊̊̊̊̊ (As provided by Client)

FOUNDATION SOIL(Assumed as per Bore data)

Bulk density Cohesion Friction Angle

20.00 KN/m3 0 KN/m2 30̊̊̊̊̊̊ (As provided by Client)

For the design of the structures, viz., the reinforced soil retaining wall, the foundation soil is considered firm and
stable. This eliminates the possibility of exceeding ultimate limit state criteria for bearing and instabilities
extending below the reinforced structure. It is assumed that the soils in the reinforced structure exhibit uniform
strength properties and is isotropic and homogeneous. Changes in these soil properties may significantly affect
the geogrid quantities and factors of safety with respect to internal and external stability.

If the soil condition is such that the ground improvement is required, this has to be treated separately and is not
covered under this submission.
MANUAL CALCULATION FOR RE WALL FOR
DIFFERENT HEIGHT
Design of RE wall for flyover at 44+646 R0

Revsion Document No. Date

TITLE BASIC INPUT FOR RS WALL
R0 MPL/RE/23/PW-1 19-Apr-23
Design Input parameters
SOIL PROPERTIES

Reinforced Backfill :

Unit weight of the fill γ1 = 20.0 kN/m3

Cohesion c1 = 0.00 kN/m2
0
Angle of internal friction Ø1 = 30

Retained (General Backfill ):

Unit weight of the fill γ2 = 20.0 kN/m3

Cohesion c2 = 0.00 kN/m2
0
Angle of internal friction Ø2 = 30

Foundation Soil :

Unit weight of the fill γ3 = 20.00 kN/m3 Foundation parameters as

Assumed. Ground improvement
Cohesion c3 = 0.00 kN/m2
to be checked separately as per
0
Angle of internal friction Ø3 = 30 actual data.

Bearing capacity factors of foundation soil (IS 6403-TABLE-1)

0
Angle of internal friction Ø3 = 30
Nc = 30.14
Nq = 18.4
Ng = 22.4

Load data
Live load surcharge qL = 24 kPa
Density of earth crust or pavement = 22 kN/m3 0

Area of carsh barrier = 1.000 m2 To be provided by structural designer

3
Density of concrete = 25 kN/m
Strip load due to crash barrier qc = 12.50 kPa
Strip load due to crash barrier SL = 25.00 KN/m 0
Width of friction slab (W) = 2 m
Point of load of strip load from inner
1
face of wall d = m
Depth of Crust or pavement = 0.610 m
Sesimic parameters
Seismic Zone Z = V
Max. ground acceleration = 0.18 Max of Z/2, Z/2*I/R*(Sa/g) IS-1893-1-2002
Coff. of Max. ground acceleration Am = 0.23 (FHWA EQN-30)
(As per FHWA, for seismic design only)

Width of Panel = 2 m
Width of Reinforcement strip = 0.09 m

7
Design of RE wall for flyover at 44+646 R0

Revsion Document No. Date

TITLE BASIC INPUT FOR RS WALL
R0 MPL/RE/23/PW-1 19-Apr-23
Summary of partial load factors

Partial Factors to be used

Serviceability
Ultimate
limit state
Partial factors ( Table-11 BS-8006 2010) limit state Seismic
to be applied tan Ø'p (fms) 1.0 1.0 1.00
Soil material factors: to be applied C' (fms) 1.6 1.0 1.00
to be applied Cᵤ (fms) 1.0 1.0 1.00
Sliding across surface of reinforcement (fs) 1.3 1.0 1.125
Soil/reinforcement interaction factors:
Pullout resistance of reinforcement (fp) 1.3 1.0 1.125
Foundation bearing Capacity : to be applied to qult (fms) 1.4 NA 1
Partial factors of safety
Sliding along base of the structure or any horizontal 1.2 NA 1.125

Partial load factors for load combinations associated with walls

Combinations
Effects
A B C Seismic
Mass of the reinforced soil body (ffs) 1.5 1.0 1.0 1
Mass of the backfill on top of the reinforced soil wall (ffs) 1.5 1.0 1.0 1
Earth pressure behind the structure (ffs) 1.5 1.5 1.0 1
Traffic load: On reinforced soil block (fq) 1.5 0 0 0.5
Behind reinforced soil block (fq) 1.5 1.5 0 0.5

Geosynthetic Material factors for determining the LTDS (Main reinforcement)

Reinforcement Material Paraweb

Types of Strap material to be used in the design
Main Reinforcement

Reduction Creep Rami- Width of

Type Tensile Strength UCS Material Reduction factor for LTDS*
factor for reduction fication Paraweb
of Strap (kN) kN factor (fm) Installation Damage kN
Durability factor factor (m)

30 KN 30.16 21.09 2.06 1.080 1.210 1.430 1.1 14.67 0.090

40 KN 40.2 28.11 2.06 1.080 1.210 1.430 1.1 19.56 0.090
50 KN 50.27 35.15 2.06 1.080 1.210 1.430 1.1 24.46 0.090
60 KN 60.32 42.18 2.06 1.080 1.210 1.430 1.1 29.34 0.090
75 KN 75.4 52.73 2.06 1.080 1.210 1.430 1.1 36.68 0.090
85 KN 85.45 59.76 2.04 1.070 1.210 1.430 1.1 41.96 0.090
101 KN 100.54 70.31 2.02 1.060 1.210 1.430 1.1 49.83 0.090

Soil Reinforcement Interation Factor (a) 0.85 (As per Data sheet of Reinf.)
After 6m depth from top m = atanf'p/fms = 0.491
K/Ka 1

8
Design of RE wall for flyover at 44+646 R0

9
 Summary of Reinforcement
Status Safe Safe Safe Safe Safe Safe Safe
HEIGHT 1.600 2.400 3.200 4.000 4.800 5.600 6.400
SR GRADE Length Connection GRADE Length Connection GRADE Length Connection GRADE Length Connection GRADE Length Connection GRADE Length Connection GRADE Length Connection
17 - - - - - - - - - - - - - - - - - - - - -
16 - - - - - - - - - - - - - - - - - - - - -
15 - - - - - - - - - - - - - - - - - - - - -
14 - - - - - - - - - - - - - - - - - - - - -
13 - - - - - - - - - - - - - - - - - - - - -
12 - - - - - - - - - - - - - - - - - - - - -
11 - - - - - - - - - - - - - - - - - - - - -
10 - - - - - - - - - - - - - - - - - - - - -
9 - - - - - - - - - - - - - - - - - - - - -
8 - - - - - - - - - - - - - - - - - - 30 9.80 2
7 - - - - - - - - - - - - - - - 30 9.20 2 30 7.50 2
6 - - - - - - - - - - - - 30 8.70 2 30 7.20 2 40 6.80 2
5 - - - - - - - - - 30 8.30 2 30 6.70 2 40 6.20 2 50 6.00 2
4 - - - - - - 30 8.00 2 30 6.30 2 40 5.70 2 50 5.70 2 60 5.80 2
3 - - - 30 7.50 2 30 6.00 2 40 5.30 2 50 5.20 2 60 5.50 2 75 5.50 2
2 30 7.00 2 30 5.50 2 40 5.00 2 50 4.80 2 60 4.90 2 75 5.20 2 75 5.50 2
1 30 5.00 2 40 4.50 2 50 4.50 2 60 4.80 2 75 4.80 2 75 5.50 2 85 6.00 2

Status Safe Safe Safe Safe Safe Safe #REF!

HEIGHT 7.200 8.000 8.800 9.600 10.400 11.200 12.000
SR GRADE Length Connection GRADE Length Connection GRADE Length Connection GRADE Length Connection GRADE Length Connection GRADE Length Connection GRADE Length Connection
17 - - - - - - - - - - - - - - - - - - #REF! #REF! #REF!
16 - - - - - - - - - - - - - - - - - - #REF! #REF! #REF!
15 - - - - - - - - - - - - - - - - - - #REF! #REF! #REF!
14 - - - - - - - - - - - - - - - 30 12.40 2 #REF! #REF! #REF!
13 - - - - - - - - - - - - 30 12.10 2 30 10.40 2 #REF! #REF! #REF!
12 - - - - - - - - - 30 11.50 2 30 9.80 2 40 9.40 2 #REF! #REF! #REF!
11 - - - - - - 30 11.00 2 30 9.30 2 40 8.80 2 50 8.60 2 #REF! #REF! #REF!
10 - - - 30 10.60 2 30 9.00 2 40 8.30 2 50 8.10 2 50 8.10 2 #REF! #REF! #REF!
9 30 10.10 2 30 8.40 2 40 8.00 2 50 7.80 2 50 7.60 2 60 7.90 2 #REF! #REF! #REF!
8 30 8.10 2 40 7.40 2 50 7.20 2 50 7.30 2 60 7.30 2 75 7.90 2 #REF! #REF! #REF!
7 40 7.10 2 50 6.90 2 50 7.00 2 60 6.80 2 75 7.30 2 75 7.90 2 #REF! #REF! #REF!
6 50 6.60 2 60 6.40 2 60 6.50 2 75 6.80 2 75 7.30 2 85 7.90 2 #REF! #REF! #REF!
5 60 6.10 2 60 6.10 2 75 6.20 2 85 6.80 2 85 7.30 2 100 7.90 2 #REF! #REF! #REF!
4 60 6.10 2 75 5.90 2 85 6.20 2 100 6.80 2 100 7.30 2 100 8.90 2 #REF! #REF! #REF!
3 75 5.60 2 85 5.90 2 100 6.50 2 100 7.00 2 100 9.30 2 85 8.10 3 #REF! #REF! #REF!
2 85 6.10 2 100 6.60 2 100 7.00 2 100 8.80 2 75 8.30 3 85 8.90 3 #REF! #REF! #REF!
1 100 6.60 2 100 7.10 2 100 8.20 2 75 8.30 3 85 8.80 3 100 9.40 3 #REF! #REF! #REF!
BEARING PRESSURE CHART
 BEARING PRESSURE CHART FOR Revsion Document No. Date
TITLE
DIFFERENT HEIGHT R0 MPL/RE/23/PW-1 19-Apr-23

Sr. No. Design Height Length of Imposed Bearing Avaialble Safe

Reinforcement of Pressure qref Capacity FoS Status
Bottom Layer (kN/m2)
1 1.600 5.000 118.279 1037.888 8.77 Safe
2 2.400 4.500 147.626 948.415 6.42 Safe
3 3.200 4.500 178.349 930.654 5.22 Safe
4 4.000 4.800 209.125 958.377 4.58 Safe
5 4.800 4.800 246.544 930.612 3.77 Safe
6 5.600 5.500 273.780 1025.185 3.74 Safe
7 6.400 6.000 304.819 1084.005 3.56 Safe
8 7.200 6.600 334.097 1160.953 3.47 Safe
9 8.000 7.100 365.550 1219.538 3.34 Safe
10 8.800 8.200 385.292 1388.539 3.60 Safe
11 9.600 8.300 424.491 1373.587 3.24 Safe
12 10.400 8.800 456.290 1431.967 3.14 Safe
13 11.200 9.400 485.877 1509.018 3.11 Safe
1. CALCULATION FOR HEIGHT 1.6
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 1.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 1.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Wall Geometry
Height of facing H = 0.600 m
Soil Height (Earth crust) = 0.61 m
Embedment depth Dm = 1.00 m
Total height of the wall = 2.21 m
Design Height (H) = 1.600 m
Mechanical height (Hm) = 2.21 m
Minimum length of Reinforcement = 1.12 m (0.7*H)
Trail Length of Strap (L) = 3.00 m (Minimum Required)
Length of Strap (L) = 5 m
0

0
Dead load surcharge 2nd Tier + qd (Earth Crust) = 13.42 kPa
0 kPa
φ = 30.00 degree
δ = 20.00 degree
α 87.709 degree
β 0.00 degree
0

External stablity analysis (Static)

Length of Strap = 5.0 m
For reinforced soil:
Ka1 = (1-sinØ1)/(1+sinØ1)
0.333
Wall batter θ = 2.291 deg.

For retrained backfill soil:

Ka2 = (1-sinØ2)/(1+sinØ2)
0.333

Am = 0.23

ʎ = = 12.883088

α = 87.709
φ = 30.00
β = 0

KAE = 0.514 Considering Am>0

KAE 0.349 Considering Am=0

DKAE = 0.1654

Calculation of factored Horizontal load (Rh)

Type of Force Formula used P.F (ffs) Case A P.F (ffs) Case B P.F (ffs) Case C P.F (ffs) Seismic Units
P1- Earth pressure ½ x ka2 x γ2 x H2 x ffs 1.5 12.8 1.5 12.8 1.0 8.5 1.0 8.53 KN/m
P2- Earth pressure due ka2 x qL x H x ffs 1.5 19.20 1.5 19.20 0.0 0.00 0.50 6.40 KN/m
P3- Due to dead load ka2 x qd x H x ffs 1.5 10.74 1.5 10.74 1.0 7.16 1.00 7.16 KN/m
P4- Horizontal strip ffsx FL 1.5 0 1.5 0 1.0 0 0 0 KN/m
PIR 0.5 x am x g1 x H2 - - - - - - 1 5.85 KN/m
(50%)PAE 50% of (0.5 x KAE x g3 x H2) - - - - - - 1 2.12 KN/m
Rh-Total factored (P1+P2+P3+P4) for case 42.7 42.7 15.7 30.1 KN/m

Calculation of factored vertical loads (Rv)

14
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 1.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 1.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Calculation of factored vertical loads (Rv)
Type of Force Formula used P.F (ffs) Case A P.F (ffs) Case B P.F (ffs) Case C P.F (ffs) Seismic Units
V1-Self weight of γ1 x H x Lxffs 1.5 240.0 1 160.0 1.0 160.0 1.0 160.0 KN/m
V2- Due to live load qL x L x ffs 1.5 180.00 0 0.00 0.0 0.00 0.5 60.00 KN/m
V3- Due to dead load qd x L x ffs 1.5 101 1 67 1.0 67 1 67 KN/m
V4- Due to strip load ffsx SL 1.5 37.5 1 25.0 1.0 25.0 0 0.0 KN/m
RV-Total factored V1+V2+V3+V4 558.2 252.1 252.1 287.1 KN/m

Sliding along base

Formula used Case A Case B Case C Seismic Units
Sliding P1+P2+P3 Static And
42.7 42.7 15.7 30.1 KN/m
forces (P1+P2+P3+PIR +50 %
Resisting
force Rv* (tanØ'p/fms)+
322.2 145.6 145.6 165.8 KN/m
(Static)/ (c3*L/fms)
(Seismic)

Calculation of Disturbing moment (Md)

Moment Formula used Case A Case B Case C Units
Md1-Earth pressure P1 x H /3 6.8 6.8 4.6 KN-m
Md2- Live Load P2 x H /2 15.36 15.36 0.00 KN-m
Md3- Dead load P3 x H /2 9 9 6 KN-m
Md4- Horziontal strip P4 x H 0.0 0.0 0.0 KN-m
Md-Total factored Md1+Md2+Md3+Md4 30.8 30.8 10.3 KN-m

Calculation of overturning moment (Mo) Seismic

Moment Formula used Seismic Unit
MO1-Earth pressure P1 x H /3 4.55 KN-m
Mo2- Live Load P2 x H /2 5.12 KN-m
Mo3- Due to horizontal P3 x H /2 5.73 KN-m
Mo4- Due to horizontal PIRx H/2 4.7 KN-m
Mo5- Due to seismic 0.5x PAE x0.6x H 2.0 KN-m
Mo-Total factored Mo1+Mo2+Mo3+Mo4 22.11 KN-m

Calculation of Resistingt moment (M r )

Moment Formula used Case A Case B Case C Seismic Units
Mr1-Reinforced fill V1 x L /2 600.0 400.0 400.0 400.0 KN-m
Mr2- Live Load V2 x Lc /2 450.0 0.0 0.0 - KN-m
Mr3- Dead load V3 x Lc /2 252 168 168 167.75 KN-m
Mr4- Vertical strip load V4 x d 37.5 25.0 25.0 - KN-m
Mr-Total factored Mr1+Mr2+Mr3+Mr4 1339.1 592.8 592.8 567.8 KN-m

Summary Table: -1
Case Rv Rh Mr Md Mo MRBP e,(m) Md/Rv L/6 ,(m)
A 558.2 42.7 1339.1 30.8 22.2 - 0.141 0.06 0.83
B 252.1 42.7 592.8 30.8 22.2 - 0.237 0.12 0.83
C 252.1 15.7 592.8 10.3 4.6 - 0.167 0.04 0.83
Seismic 287.1 30.1 567.8 - 22.1 717.8 0.08 - 1.67 L/3

15
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 1.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 1.6 m
R0 MPL/RE/23/PW-1 19-Apr-23

Bearing pressure (qref) Mayerhoff (Base

distribution
length is Used)
Bearing pressure Formula used Case A Case B Case C Seismic Unit
qref Rv x/(L-2e) 118.3 55.7 54.0 59.2 KN/m2
qult cfNc+qNq+0.5(L-2e)g3Ng 1425.0 1381.9 1413.3 1453.5 KN/m2
qsafe qult./fms+gf*dm 1037.9 1007.1 1029.5 1058.2 KN/m2

Factor of saftey table

Permisibl
Bearing Overturni e e< L/6
Case failure ng Sliding Ecentricity ,e m FOS
A 8.77 43.51 7.54 0.141 0.833 5.93
B 18.08 19.3 3.41 0.237 0.833 3.52
C 19.06 57.7 9.28 0.167 0.833 5.00
Seismic 24.53 25.7 5.5 0.077 1.667 21.64
Wall External stablity status

Parameter Case A Case B Case C Seismic Req. F.O.S

Bearing
Safe Safe Safe Safe 1.4
General Shearfailure
Overturning Safe Safe Safe Safe 1.2
Sliding Safe Safe Safe Safe 1.2
Ecentricity Safe Safe Safe Safe 1

16
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 1.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 1.6 m
R0 MPL/RE/23/PW-1 19-Apr-23

Internal stability analysis (Static)

A) Check for Rupture of reinforcement Q = 0.29

Case A
Elevation Vertical
Length of Strap Elevation
Strap from spacing
Strap ,L spacing from Top, Rhj Rvj Mdj Mrj Mo
layers base, hi of Strap,
(m) ,m hj ,m
,m Svj ,m
1 5.0 0.4 0.4 1.2 0.800 29.7 460.7 16.4 1151.6 11.5 0.0
2 7.0 0.8 1.2 0.4 0.800 8.3 476.9 1.6 1669.2 1.1 0.0
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

17
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 1.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 1.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.5 1/6
0.04 2.60 93.46 24.92 3.85 0.0 0.0 28.77 99.97 0.01 Safe Safe
0.00 2.20 68.20 18.19 4.55 0.0 0.0 22.73 1564.86 0.00 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

18
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 1.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 1.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Case B
Elevation Vertical
Length of Strap Elevation
Strap from spacing
Strap ,L spacing from Top, Rhj Rvj Mdj Mrj Mo
layers base, hi of Strap,
(m) ,m hj ,m
,m Svj ,m
1 5 0.4 0.4 1.2 0.8 29.65 187.10 16.35 467.8 11.52
2 7 0.8 1.2 0.4 0.8 8.28 149.94 1.60 524.8 1.07
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

19
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 1.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 1.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.35 1/6
0.09 2.60 38.78 10.34 2.56 0.0 0.0 12.90 40.603 0.017 Safe Safe
0.01 2.20 21.49 5.73 3.03 0.0 0.0 8.76 491.991 0.002 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

20
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 1.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 1.6 m
R0 MPL/RE/23/PW-1 19-Apr-23

Case C
Elevation Vertical
Length of Strap from Elevation spacing
Strap Strap ,L spacing base, hi from Top, of Strap,
layers (m) ,m ,m hj ,m Svj ,m Rhj Rvj Mdj Mrj Mo
1 5 0.4 0.4 1.2 0.8 10.17 187.10 5.14 467.75 1.92
2 7 0.8 1.2 0.4 0.8 2.32 149.94 0.43 524.79 0.07
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

21
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 1.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 1.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.35 1/6
0.03 2.60 37.84 10.09 2.56 0.0 0.0 12.65 243.62 0.01 Safe Safe
0.00 2.20 21.44 5.72 3.03 0.0 0.0 8.75 7379.86 0.00 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

22
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 1.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 1.6 m
R0 MPL/RE/23/PW-1 19-Apr-23

Seismic Analysis
Elevation Vertical
Length of Strap from Elevation spacing
Strap Strap ,L spacing base, hi from Top, of Strap,
layers (m) ,m ,m hj ,m Svj ,m Rhj Rvj Mo Mrj PI=Wa*Am
1 5 0.4 0.4 1.2 0.8 13.73 247.10 8.17 467.75 1.90
2 7 0.8 1.2 0.4 0.8 2.72 233.94 0.56 524.79 0.21
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

23
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 1.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 1.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Rsvj Check for Check for
Mr/Mo
Ecentricit (for overturni eccentrici
Dj svj Tpj Tmd Tj (Overturi e/L
y, ej Internal ngMr/Mo tye / L ≤
ning)
Sliding) ≥ 1.125 1/3
0.64 2.60 66.43 17.71 0.82 18.5 121.3 57.28 0.13 Safe Safe
1.26 2.20 52.20 13.92 0.12 14.0 114.8 945.18 0.18 Safe Safe
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

24
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 1.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 1.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Rupture check for Reinforcement FOS REQ = 1.000

MAX Tj
Strap CASE Width of Force per Width of FOS FOS
hj T avialable
Type A,B,C & Panel strip Strip Status Status
SEISMIC
1.20 30 KN 14.67 28.77 2.00 14.38 0.09 1.020 Safe
0.40 30 KN 14.67 22.73 2.00 11.37 0.09 1.291 Safe
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -

25
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 1.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 1.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check For Internal Sliding
Strap
length Load case A Load case B Seismic Fos>=1.3 Fos>=1.3 Fos>=1.125
Rhj Rvj Rsvj FOS Rhj Rvj Rsvj FOS FOS Case A Case B Seismic
5.0 29.7 460.7 226.1 7.624 29.7 187.1 91.8 3.097 8.831 Safe Safe Safe
7.0 8.3 476.9 234.0 28.252 8.3 149.9 73.6 8.883 42.228 Safe Safe Safe
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -

26
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 1.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 1.6 m
R0 MPL/RE/23/PW-1 19-Apr-23

Pull out or Adherence of Reinforcement check

(Pj) = Perimeter of jth layer total horizontal width of Strap of top and bottom faces = 0.180 m

Elevation Vertical Cofficient

Elevation Effective
from spacing Strap of
from Top, length of Case A Tj Puj FOS ≥ 1
base, hi of Strap, length Friction.
hj ,m Strap
,m Svj ,m m
1.2 0.4 0.8 5.0 4.77 28.77 0.491 36.38 1.265
0.4 1.2 0.8 7.0 6.31 22.73 0.491 27.54 1.212
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -

27
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 1.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 1.6 m
R0 MPL/RE/23/PW-1 19-Apr-23

Pr
Seismic Pullout FoS nos of
Case B Tj Puj FOS Case C Tj Puj FOS Status
Tj Resistanc Pullout Strip/m
e
12.90 31.53 2.443 12.90 31.53 2.443 18.5 21.44 1.157 2 Safe
4.38 23.87 5.449 8.76 23.87 2.725 14.0 16.23 1.156 2 Safe
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

28
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 1.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 1.6 m
R0 MPL/RE/23/PW-1 19-Apr-23

From Bottom Layer DESIGN HT=

1.600 m

Elevation
Strap Strap No. of
Sr No from
Grade Length Connector
bottom

1 30 KN 5.0 0.4 2
2 30 KN 7.0 1.2 2
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -

29
2. CALCULATION FOR HEIGHT 2.4
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 2.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 2.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Wall Geometry
Height of facing H = 1.400 m
Soil Height (Earth crust) = 0.61 m
Embedment depth Dm = 1.00 m
Total height of the wall = 3.01 m
Design Height (H) = 2.400 m
Mechanical height (Hm) = 3.01 m
Minimum length of Reinforcement = 1.68 m (0.7*H)
Trail Length of Strap (L) = 3.00 m (Minimum Required)
Length of Strap (L) = 4.5 m
0

0
Dead load surcharge 2nd Tier + qd (Earth Crust) = 13.42 kPa
0 kPa
φ = 30.00 degree
δ = 20.00 degree
α 87.709 degree
β 0.00 degree
0

External stablity analysis (Static)

Length of Strap = 4.5 m
For reinforced soil:
Ka1 = (1-sinØ1)/(1+sinØ1)
0.333
Wall batter θ = 2.291 deg.

For retrained backfill soil:

Ka2 = (1-sinØ2)/(1+sinØ2)
0.333

Am = 0.23

ʎ = = 12.883088

α = 87.709
φ = 30.00
β = 0

KAE = 0.514 Considering Am>0

KAE 0.349 Considering Am=0

DKAE = 0.1654

Calculation of factored Horizontal load (Rh)

Type of Force Formula used P.F (ffs) Case A P.F (ffs) Case B P.F (ffs) Case C P.F (ffs) Seismic Units
P1- Earth pressure ½ x ka2 x γ2 x H2 x ffs 1.5 28.8 1.5 28.8 1.0 19.2 1.0 19.20 KN/m
P2- Earth pressure due ka2 x qL x H x ffs 1.5 28.80 1.5 28.80 0.0 0.00 0.50 9.60 KN/m
P3- Due to dead load ka2 x qd x H x ffs 1.5 16.10 1.5 16.10 1.0 10.74 1.00 10.74 KN/m
P4- Horizontal strip ffsx FL 1.5 0 1.5 0 1.0 0 0 0 KN/m
PIR 0.5 x am x g1 x H2 - - - - - - 1 13.17 KN/m
(50%)PAE 50% of (0.5 x KAE x g3 x H2) - - - - - - 1 4.76 KN/m
Rh-Total factored (P1+P2+P3+P4) for case 73.7 73.7 29.9 57.5 KN/m

Calculation of factored vertical loads (Rv)

31
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 2.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 2.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Calculation of factored vertical loads (Rv)
Type of Force Formula used P.F (ffs) Case A P.F (ffs) Case B P.F (ffs) Case C P.F (ffs) Seismic Units
V1-Self weight of γ1 x H x Lxffs 1.5 324.0 1 216.0 1.0 216.0 1.0 216.0 KN/m
V2- Due to live load qL x L x ffs 1.5 162.00 0 0.00 0.0 0.00 0.5 54.00 KN/m
V3- Due to dead load qd x L x ffs 1.5 91 1 60 1.0 60 1 60 KN/m
V4- Due to strip load ffsx SL 1.5 37.5 1 25.0 1.0 25.0 0 0.0 KN/m
RV-Total factored V1+V2+V3+V4 614.1 301.4 301.4 330.4 KN/m

Sliding along base

Formula used Case A Case B Case C Seismic Units
Sliding P1+P2+P3 Static And
73.7 73.7 29.9 57.5 KN/m
forces (P1+P2+P3+PIR +50 %
Resisting
force Rv* (tanØ'p/fms)+
354.5 174.0 174.0 190.8 KN/m
(Static)/ (c3*L/fms)
(Seismic)

Calculation of Disturbing moment (Md)

Moment Formula used Case A Case B Case C Units
Md1-Earth pressure P1 x H /3 23.0 23.0 15.4 KN-m
Md2- Live Load P2 x H /2 34.56 34.56 0.00 KN-m
Md3- Dead load P3 x H /2 19 19 13 KN-m
Md4- Horziontal strip P4 x H 0.0 0.0 0.0 KN-m
Md-Total factored Md1+Md2+Md3+Md4 76.9 76.9 28.2 KN-m

Calculation of overturning moment (Mo) Seismic

Moment Formula used Seismic Unit
MO1-Earth pressure P1 x H /3 15.36 KN-m
Mo2- Live Load P2 x H /2 11.52 KN-m
Mo3- Due to horizontal P3 x H /2 12.88 KN-m
Mo4- Due to horizontal PIRx H/2 15.8 KN-m
Mo5- Due to seismic 0.5x PAE x0.6x H 6.9 KN-m
Mo-Total factored Mo1+Mo2+Mo3+Mo4 62.43 KN-m

Calculation of Resistingt moment (M r )

Moment Formula used Case A Case B Case C Seismic Units
Mr1-Reinforced fill V1 x L /2 729.0 486.0 486.0 486.0 KN-m
Mr2- Live Load V2 x Lc /2 364.5 0.0 0.0 - KN-m
Mr3- Dead load V3 x Lc /2 204 136 136 135.8775 KN-m
Mr4- Vertical strip load V4 x d 37.5 25.0 25.0 - KN-m
Mr-Total factored Mr1+Mr2+Mr3+Mr4 1334.8 646.9 646.9 621.9 KN-m

Summary Table: -1
Case Rv Rh Mr Md Mo MRBP e,(m) Md/Rv L/6 ,(m)
A 614.1 73.7 1334.8 76.9 57.6 - 0.170 0.13 0.75
B 301.4 73.7 646.9 76.9 57.6 - 0.295 0.26 0.75
C 301.4 29.9 646.9 28.2 15.4 - 0.155 0.09 0.75
Seismic 330.4 57.5 621.9 - 62.4 743.4 0.19 - 1.50 L/3

32
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 2.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 2.4 m
R0 MPL/RE/23/PW-1 19-Apr-23

Bearing pressure (qref) Mayerhoff (Base

distribution
length is Used)
Bearing pressure Formula used Case A Case B Case C Seismic Unit
qref Rv x/(L-2e) 147.6 77.1 71.9 80.2 KN/m2
qult cfNc+qNq+0.5(L-2e)g3Ng 1299.8 1243.9 1306.7 1291.4 KN/m2
qsafe qult./fms+gf*dm 948.4 908.5 953.4 942.4 KN/m2

Factor of saftey table

Permisibl
Bearing Overturni e e< L/6
Case failure ng Sliding Ecentricity ,e m FOS
A 6.42 17.35 4.81 0.170 0.750 4.41
B 11.79 8.4 2.36 0.295 0.750 2.54
C 13.26 22.9 5.81 0.155 0.750 4.85
Seismic 16.11 10.0 3.3 0.189 1.500 7.94
Wall External stablity status

Parameter Case A Case B Case C Seismic Req. F.O.S

Bearing
Safe Safe Safe Safe 1.4
General Shearfailure
Overturning Safe Safe Safe Safe 1.2
Sliding Safe Safe Safe Safe 1.2
Ecentricity Safe Safe Safe Safe 1

33
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 2.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 2.4 m
R0 MPL/RE/23/PW-1 19-Apr-23

Internal stability analysis (Static)

A) Check for Rupture of reinforcement Q = 0.29

Case A
Elevation Vertical
Length of Strap Elevation
Strap from spacing
Strap ,L spacing from Top, Rhj Rvj Mdj Mrj Mo
layers base, hi of Strap,
(m) ,m hj ,m
,m Svj ,m
1 4.5 0.4 0.4 2.0 0.800 57.4 522.6 50.8 1175.8 37.3 0.0
2 5.5 0.8 1.2 1.2 0.800 29.7 506.7 16.4 1393.5 11.5 0.0
3 7.5 0.8 2.0 0.4 0.800 8.3 511.0 1.6 1916.2 1.1 0.0
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

34
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 2.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 2.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.5 1/6
0.10 3.00 121.37 32.37 3.33 0.0 0.0 35.70 31.50 0.02 Safe Safe
0.03 2.60 93.22 24.86 3.85 0.0 0.0 28.71 120.96 0.01 Safe Safe
0.00 2.20 68.19 18.18 4.55 0.0 0.0 22.73 1796.40 0.00 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

35
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 2.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 2.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Case B
Elevation Vertical
Length of Strap Elevation
Strap from spacing
Strap ,L spacing from Top, Rhj Rvj Mdj Mrj Mo
layers base, hi of Strap,
(m) ,m hj ,m
,m Svj ,m
1 4.5 0.4 0.4 2 0.8 57.42 240.39 50.75 540.9 37.33
2 5.5 0.8 1.2 1.2 0.8 29.65 205.81 16.35 566.0 11.52
3 7.5 0.8 2 0.4 0.8 8.28 160.65 1.60 602.4 1.07
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

36
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 2.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 2.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.35 1/6
0.21 3.00 58.95 15.72 2.22 0.0 0.0 17.94 14.488 0.047 Safe Safe
0.08 2.60 38.53 10.28 2.56 0.0 0.0 12.84 49.130 0.014 Safe Safe
0.01 2.20 21.48 5.73 3.03 0.0 0.0 8.76 564.785 0.001 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

37
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 2.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 2.4 m
R0 MPL/RE/23/PW-1 19-Apr-23

Case C
Elevation Vertical
Length of Strap from Elevation spacing
Strap Strap ,L spacing base, hi from Top, of Strap,
layers (m) ,m ,m hj ,m Svj ,m Rhj Rvj Mdj Mrj Mo
1 4.5 0.4 0.4 2 0.8 22.28 240.39 17.84 540.88 8.89
2 5.5 0.8 1.2 1.2 0.8 10.17 205.81 5.14 565.98 1.92
3 7.5 0.8 2 0.4 0.8 2.32 160.65 0.43 602.44 0.07
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

38
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 2.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 2.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.35 1/6
0.07 3.00 55.24 14.73 2.22 0.0 0.0 16.95 60.85 0.02 Safe Safe
0.02 2.60 37.76 10.07 2.56 0.0 0.0 12.63 294.78 0.00 Safe Safe
0.00 2.20 21.44 5.72 3.03 0.0 0.0 8.75 8471.78 0.00 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

39
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 2.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 2.4 m
R0 MPL/RE/23/PW-1 19-Apr-23

Seismic Analysis
Elevation Vertical
Length of Strap from Elevation spacing
Strap Strap ,L spacing base, hi from Top, of Strap,
layers (m) ,m ,m hj ,m Svj ,m Rhj Rvj Mo Mrj PI=Wa*Am
1 4.5 0.4 0.4 2 0.8 32.18 294.39 31.75 540.88 5.28
2 5.5 0.8 1.2 1.2 0.8 13.73 271.81 8.26 565.98 1.90
3 7.5 0.8 2 0.4 0.8 2.72 250.65 0.57 602.44 0.21
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

40
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 2.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 2.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Rsvj Check for Check for
Mr/Mo
Ecentricit (for overturni eccentrici
Dj svj Tpj Tmd Tj (Overturi e/L
y, ej Internal ngMr/Mo tye / L ≤
ning)
Sliding) ≥ 1.125 1/3
0.52 3.00 85.11 22.70 1.46 24.2 144.5 17.04 0.12 Safe Safe
0.70 2.60 66.24 17.66 0.59 18.3 133.4 68.51 0.13 Safe Safe
1.35 2.20 52.19 13.92 0.09 14.0 123.0 1064.57 0.18 Safe Safe
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

41
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 2.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 2.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Rupture check for Reinforcement FOS REQ = 1.000

MAX Tj
Strap CASE Width of Force per Width of FOS FOS
hj T avialable
Type A,B,C & Panel strip Strip Status Status
SEISMIC
2.00 40 KN 19.56 35.70 2.00 17.85 0.09 1.096 Safe
1.20 30 KN 14.67 28.71 2.00 14.35 0.09 1.022 Safe
0.40 30 KN 14.67 22.73 2.00 11.36 0.09 1.291 Safe
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -

42
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 2.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 2.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check For Internal Sliding
Strap
length Load case A Load case B Seismic Fos>=1.3 Fos>=1.3 Fos>=1.125
Rhj Rvj Rsvj FOS Rhj Rvj Rsvj FOS FOS Case A Case B Seismic
4.5 57.4 522.6 256.5 4.466 57.4 240.4 118.0 2.055 4.489 Safe Safe Safe
5.5 29.7 506.7 248.7 8.386 29.7 205.8 101.0 3.406 9.714 Safe Safe Safe
7.5 8.3 511.0 250.8 30.270 8.3 160.7 78.8 9.517 45.245 Safe Safe Safe
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -

43
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 2.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 2.4 m
R0 MPL/RE/23/PW-1 19-Apr-23

Pull out or Adherence of Reinforcement check

(Pj) = Perimeter of jth layer total horizontal width of Strap of top and bottom faces = 0.180 m

Elevation Vertical Cofficient

Elevation Effective
from spacing Strap of
from Top, length of Case A Tj Puj FOS ≥ 1
base, hi of Strap, length Friction.
hj ,m Strap
,m Svj ,m m
2 0.4 0.8 4.5 4.27 35.70 0.491 46.49 1.302
1.2 1.2 0.8 5.5 4.81 28.71 0.491 36.67 1.277
0.4 2 0.8 7.5 6.35 22.73 0.491 27.71 1.219
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -

44
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 2.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 2.4 m
R0 MPL/RE/23/PW-1 19-Apr-23

Pr
Seismic Pullout FoS nos of
Case B Tj Puj FOS Case C Tj Puj FOS Status
Tj Resistanc Pullout Strip/m
e
17.94 40.29 2.245 17.94 40.29 2.245 24.2 27.40 1.134 2 Safe
6.42 31.78 4.950 12.84 31.78 2.475 18.3 21.61 1.184 2 Safe
4.38 24.01 5.484 8.76 24.01 2.742 14.0 16.33 1.166 2 Safe
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

45
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 2.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 2.4 m
R0 MPL/RE/23/PW-1 19-Apr-23

From Bottom Layer DESIGN HT=

2.400 m

Elevation
Strap Strap No. of
Sr No from
Grade Length Connector
bottom

1 40 KN 4.5 0.4 2
2 30 KN 5.5 1.2 2
3 30 KN 7.5 2.0 2
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -

46
3. CALCULATION FOR HEIGHT 3.2
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 3.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 3.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Wall Geometry
Height of facing H = 2.200 m
Soil Height (Earth crust) = 0.61 m
Embedment depth Dm = 1.00 m
Total height of the wall = 3.81 m
Design Height (H) = 3.200 m
Mechanical height (Hm) = 3.81 m
Minimum length of Reinforcement = 2.24 m (0.7*H)
Trail Length of Strap (L) = 3.00 m (Minimum Required)
Length of Strap (L) = 4.5 m
0

0
Dead load surcharge 2nd Tier + qd (Earth Crust) = 13.42 kPa
0 kPa
φ = 30.00 degree
δ = 20.00 degree
α 87.709 degree
β 0.00 degree
0

External stablity analysis (Static)

Length of Strap = 4.5 m
For reinforced soil:
Ka1 = (1-sinØ1)/(1+sinØ1)
0.333
Wall batter θ = 2.291 deg.

For retrained backfill soil:

Ka2 = (1-sinØ2)/(1+sinØ2)
0.333

Am = 0.23

ʎ = = 12.883088

α = 87.709
φ = 30.00
β = 0

KAE = 0.514 Considering Am>0

KAE 0.349 Considering Am=0

DKAE = 0.1654

Calculation of factored Horizontal load (Rh)

Type of Force Formula used P.F (ffs) Case A P.F (ffs) Case B P.F (ffs) Case C P.F (ffs) Seismic Units
P1- Earth pressure ½ x ka2 x γ2 x H2 x ffs 1.5 51.2 1.5 51.2 1.0 34.1 1.0 34.13 KN/m
P2- Earth pressure due ka2 x qL x H x ffs 1.5 38.40 1.5 38.40 0.0 0.00 0.50 12.80 KN/m
P3- Due to dead load ka2 x qd x H x ffs 1.5 21.47 1.5 21.47 1.0 14.31 1.00 14.31 KN/m
P4- Horizontal strip ffsx FL 1.5 0 1.5 0 1.0 0 0 0 KN/m
PIR 0.5 x am x g1 x H2 - - - - - - 1 23.41 KN/m
(50%)PAE 50% of (0.5 x KAE x g3 x H2) - - - - - - 1 8.47 KN/m
Rh-Total factored (P1+P2+P3+P4) for case 111.1 111.1 48.4 93.1 KN/m

Calculation of factored vertical loads (Rv)

48
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 3.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 3.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Calculation of factored vertical loads (Rv)
Type of Force Formula used P.F (ffs) Case A P.F (ffs) Case B P.F (ffs) Case C P.F (ffs) Seismic Units
V1-Self weight of γ1 x H x Lxffs 1.5 432.0 1 288.0 1.0 288.0 1.0 288.0 KN/m
V2- Due to live load qL x L x ffs 1.5 162.00 0 0.00 0.0 0.00 0.5 54.00 KN/m
V3- Due to dead load qd x L x ffs 1.5 91 1 60 1.0 60 1 60 KN/m
V4- Due to strip load ffsx SL 1.5 37.5 1 25.0 1.0 25.0 0 0.0 KN/m
RV-Total factored V1+V2+V3+V4 722.1 373.4 373.4 402.4 KN/m

Sliding along base

Formula used Case A Case B Case C Seismic Units
Sliding P1+P2+P3 Static And
111.1 111.1 48.4 93.1 KN/m
forces (P1+P2+P3+PIR +50 %
Resisting
force Rv* (tanØ'p/fms)+
416.9 215.6 215.6 232.3 KN/m
(Static)/ (c3*L/fms)
(Seismic)

Calculation of Disturbing moment (Md)

Moment Formula used Case A Case B Case C Units
Md1-Earth pressure P1 x H /3 54.6 54.6 36.4 KN-m
Md2- Live Load P2 x H /2 61.44 61.44 0.00 KN-m
Md3- Dead load P3 x H /2 34 34 23 KN-m
Md4- Horziontal strip P4 x H 0.0 0.0 0.0 KN-m
Md-Total factored Md1+Md2+Md3+Md4 150.4 150.4 59.3 KN-m

Calculation of overturning moment (Mo) Seismic

Moment Formula used Seismic Unit
MO1-Earth pressure P1 x H /3 36.41 KN-m
Mo2- Live Load P2 x H /2 20.48 KN-m
Mo3- Due to horizontal P3 x H /2 22.90 KN-m
Mo4- Due to horizontal PIRx H/2 37.5 KN-m
Mo5- Due to seismic 0.5x PAE x0.6x H 16.3 KN-m
Mo-Total factored Mo1+Mo2+Mo3+Mo4 133.51 KN-m

Calculation of Resistingt moment (M r )

Moment Formula used Case A Case B Case C Seismic Units
Mr1-Reinforced fill V1 x L /2 972.0 648.0 648.0 648.0 KN-m
Mr2- Live Load V2 x Lc /2 364.5 0.0 0.0 - KN-m
Mr3- Dead load V3 x Lc /2 204 136 136 135.8775 KN-m
Mr4- Vertical strip load V4 x d 37.5 25.0 25.0 - KN-m
Mr-Total factored Mr1+Mr2+Mr3+Mr4 1577.8 808.9 808.9 783.9 KN-m

Summary Table: -1
Case Rv Rh Mr Md Mo MRBP e,(m) Md/Rv L/6 ,(m)
A 722.1 111.1 1577.8 150.4 116.1 - 0.226 0.21 0.75
B 373.4 111.1 808.9 150.4 116.1 - 0.395 0.40 0.75
C 373.4 48.4 808.9 59.3 36.4 - 0.181 0.16 0.75
Seismic 402.4 93.1 783.9 - 133.5 905.4 0.33 - 1.50 L/3

49
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 3.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 3.2 m
R0 MPL/RE/23/PW-1 19-Apr-23

Bearing pressure (qref) Mayerhoff (Base

distribution
length is Used)
Bearing pressure Formula used Case A Case B Case C Seismic Unit
qref Rv x/(L-2e) 178.3 100.6 90.2 104.9 KN/m2
qult cfNc+qNq+0.5(L-2e)g3Ng 1274.9 1199.3 1294.8 1227.4 KN/m2
qsafe qult./fms+gf*dm 930.7 876.6 944.9 896.7 KN/m2

Factor of saftey table

Permisibl
Bearing Overturni e e< L/6
Case failure ng Sliding Ecentricity ,e m FOS
A 5.22 10.49 3.75 0.226 0.750 3.32
B 8.71 5.4 1.94 0.395 0.750 1.90
C 10.47 13.6 4.45 0.181 0.750 4.14
Seismic 11.70 5.9 2.5 0.332 1.500 4.52
Wall External stablity status

Parameter Case A Case B Case C Seismic Req. F.O.S

Bearing
Safe Safe Safe Safe 1.4
General Shearfailure
Overturning Safe Safe Safe Safe 1.2
Sliding Safe Safe Safe Safe 1.2
Ecentricity Safe Safe Safe Safe 1

50
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 3.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 3.2 m
R0 MPL/RE/23/PW-1 19-Apr-23

Internal stability analysis (Static)

A) Check for Rupture of reinforcement Q = 0.29

Case A
Elevation Vertical
Length of Strap Elevation
Strap from spacing
Strap ,L spacing from Top, Rhj Rvj Mdj Mrj Mo
layers base, hi of Strap,
(m) ,m hj ,m
,m Svj ,m
1 4.5 0.4 0.4 2.8 0.800 91.6 630.6 109.9 1418.8 83.6 0.0
2 5.0 0.8 1.2 2.0 0.800 57.4 580.7 50.8 1451.6 37.3 0.0
3 6.0 0.8 2.0 1.2 0.800 29.7 552.8 16.4 1658.3 11.5 0.0
4 8.0 0.8 2.8 0.4 0.800 8.3 545.0 1.6 2180.2 1.1 0.0
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

51
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 3.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 3.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.5 1/6
0.17 3.40 151.90 40.51 2.94 0.0 0.0 43.45 16.97 0.04 Safe Safe
0.09 3.00 120.34 32.09 3.33 0.0 0.0 35.42 38.88 0.02 Safe Safe
0.03 2.60 93.05 24.81 3.85 0.0 0.0 28.66 143.95 0.00 Safe Safe
0.00 2.20 68.18 18.18 4.55 0.0 0.0 22.73 2043.90 0.00 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

52
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 3.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 3.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Case B
Elevation Vertical
Length of Strap Elevation
Strap from spacing
Strap ,L spacing from Top, Rhj Rvj Mdj Mrj Mo
layers base, hi of Strap,
(m) ,m hj ,m
,m Svj ,m
1 4.5 0.4 0.4 2.8 0.8 91.59 312.39 109.93 702.9 83.63
2 5 0.8 1.2 2 0.8 57.42 267.10 50.75 667.8 37.33
3 6 0.8 2 1.2 0.8 29.65 224.52 16.35 673.6 11.52
4 8 0.8 2.8 0.4 0.8 8.28 171.36 1.60 685.4 1.07
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

53
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 3.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 3.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.35 1/6
0.35 3.40 82.29 21.94 1.96 0.0 0.0 23.90 8.405 0.078 Safe Safe
0.19 3.00 57.81 15.42 2.22 0.0 0.0 17.64 17.886 0.038 Safe Safe
0.07 2.60 38.35 10.23 2.56 0.0 0.0 12.79 58.469 0.012 Safe Safe
0.01 2.20 21.47 5.73 3.03 0.0 0.0 8.76 642.600 0.001 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

54
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 3.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 3.2 m
R0 MPL/RE/23/PW-1 19-Apr-23

Case C
Elevation Vertical
Length of Strap from Elevation spacing
Strap Strap ,L spacing base, hi from Top, of Strap,
layers (m) ,m ,m hj ,m Svj ,m Rhj Rvj Mdj Mrj Mo
1 4.5 0.4 0.4 2.8 0.8 38.66 312.39 41.93 702.88 24.39
2 5 0.8 1.2 2 0.8 22.28 267.10 17.84 667.75 8.89
3 6 0.8 2 1.2 0.8 10.17 224.52 5.14 673.56 1.92
4 8 0.8 2.8 0.4 0.8 2.32 171.36 0.43 685.44 0.07
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

55
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 3.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 3.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.35 1/6
0.13 3.40 73.82 19.69 1.96 0.0 0.0 21.65 28.82 0.03 Safe Safe
0.07 3.00 54.89 14.64 2.22 0.0 0.0 16.86 75.12 0.01 Safe Safe
0.02 2.60 37.71 10.06 2.56 0.0 0.0 12.62 350.81 0.00 Safe Safe
0.00 2.20 21.43 5.72 3.03 0.0 0.0 8.75 9639.00 0.00 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

56
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 3.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 3.2 m
R0 MPL/RE/23/PW-1 19-Apr-23

Seismic Analysis
Elevation Vertical
Length of Strap from Elevation spacing
Strap Strap ,L spacing base, hi from Top, of Strap,
layers (m) ,m ,m hj ,m Svj ,m Rhj Rvj Mo Mrj PI=Wa*Am
1 4.5 0.4 0.4 2.8 0.8 58.06 366.39 80.00 702.88 10.35
2 5 0.8 1.2 2 0.8 32.18 327.10 32.02 667.75 5.28
3 6 0.8 2 1.2 0.8 13.73 296.52 8.36 673.56 1.90
4 8 0.8 2.8 0.4 0.8 2.72 267.36 0.58 685.44 0.21
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

57
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 3.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 3.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Rsvj Check for Check for
Mr/Mo
Ecentricit (for overturni eccentrici
Dj svj Tpj Tmd Tj (Overturi e/L
y, ej Internal ngMr/Mo tye / L ≤
ning)
Sliding) ≥ 1.125 1/3
0.55 3.40 107.76 28.74 2.23 31.0 179.8 8.79 0.12 Safe Safe
0.56 3.00 84.15 22.44 1.15 23.6 160.5 20.86 0.11 Safe Safe
0.76 2.60 66.09 17.62 0.46 18.1 145.5 80.59 0.13 Safe Safe
1.44 2.20 52.19 13.92 0.07 14.0 131.2 1188.84 0.18 Safe Safe
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

58
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 3.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 3.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Rupture check for Reinforcement FOS REQ = 1.000

MAX Tj
Strap CASE Width of Force per Width of FOS FOS
hj T avialable
Type A,B,C & Panel strip Strip Status Status
SEISMIC
2.80 50 KN 24.46 43.45 2.00 21.72 0.09 1.126 Safe
2.00 40 KN 19.56 35.42 2.00 17.71 0.09 1.104 Safe
1.20 30 KN 14.67 28.66 2.00 14.33 0.09 1.024 Safe
0.40 30 KN 14.67 22.73 2.00 11.36 0.09 1.291 Safe
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -

59
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 3.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 3.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check For Internal Sliding
Strap
length Load case A Load case B Seismic Fos>=1.3 Fos>=1.3 Fos>=1.125
Rhj Rvj Rsvj FOS Rhj Rvj Rsvj FOS FOS Case A Case B Seismic
4.5 91.6 630.6 309.5 3.379 91.6 312.4 153.3 1.674 3.097 Safe Safe Safe
5.0 57.4 580.7 285.0 4.963 57.4 267.1 131.1 2.283 4.988 Safe Safe Safe
6.0 29.7 552.8 271.3 9.149 29.7 224.5 110.2 3.716 10.597 Safe Safe Safe
8.0 8.3 545.0 267.5 32.288 8.3 171.4 84.1 10.151 48.261 Safe Safe Safe
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -

60
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 3.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 3.2 m
R0 MPL/RE/23/PW-1 19-Apr-23

Pull out or Adherence of Reinforcement check

(Pj) = Perimeter of jth layer total horizontal width of Strap of top and bottom faces = 0.180 m

Elevation Vertical Cofficient

Elevation Effective
from spacing Strap of
from Top, length of Case A Tj Puj FOS ≥ 1
base, hi of Strap, length Friction.
hj ,m Strap
,m Svj ,m m
2.8 0.4 0.8 4.5 4.27 43.45 0.491 60.41 1.390
2 1.2 0.8 5.0 4.31 35.42 0.491 46.90 1.324
1.2 2 0.8 6.0 4.85 28.66 0.491 36.96 1.290
0.4 2.8 0.8 8.0 6.38 22.73 0.491 27.87 1.226
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -

61
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 3.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 3.2 m
R0 MPL/RE/23/PW-1 19-Apr-23

Pr
Seismic Pullout FoS nos of
Case B Tj Puj FOS Case C Tj Puj FOS Status
Tj Resistanc Pullout Strip/m
e
23.90 52.36 2.190 23.90 52.36 2.190 31.0 35.60 1.150 2 Safe
8.82 40.65 4.609 17.64 40.65 2.304 23.6 27.64 1.172 2 Safe
6.40 32.03 5.009 12.79 32.03 2.504 18.1 21.78 1.204 2 Safe
4.38 24.16 5.518 8.76 24.16 2.759 14.0 16.43 1.175 2 Safe
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

62
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 3.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 3.2 m
R0 MPL/RE/23/PW-1 19-Apr-23

From Bottom Layer DESIGN HT=

3.200 m

Elevation
Strap Strap No. of
Sr No from
Grade Length Connector
bottom

1 50 KN 4.5 0.4 2
2 40 KN 5.0 1.2 2
3 30 KN 6.0 2.0 2
4 30 KN 8.0 2.8 2
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -

63
4. CALCULATION FOR HEIGHT 4
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Wall Geometry
Height of facing H = 3.000 m
Soil Height (Earth crust) = 0.61 m
Embedment depth Dm = 1.00 m
Total height of the wall = 4.61 m
Design Height (H) = 4.000 m
Mechanical height (Hm) = 4.61 m
Minimum length of Reinforcement = 2.80 m (0.7*H)
Trail Length of Strap (L) = 3.00 m (Minimum Required)
Length of Strap (L) = 4.8 m
0

0
Dead load surcharge 2nd Tier + qd (Earth Crust) = 13.42 kPa
0 kPa
φ = 30.00 degree
δ = 20.00 degree
α 87.709 degree
β 0.00 degree
0

External stablity analysis (Static)

Length of Strap = 4.8 m
For reinforced soil:
Ka1 = (1-sinØ1)/(1+sinØ1)
0.333
Wall batter θ = 2.291 deg.

For retrained backfill soil:

Ka2 = (1-sinØ2)/(1+sinØ2)
0.333

Am = 0.23

ʎ = = 12.883088

α = 87.709
φ = 30.00
β = 0

KAE = 0.514 Considering Am>0

KAE 0.349 Considering Am=0

DKAE = 0.1654

Calculation of factored Horizontal load (Rh)

Type of Force Formula used P.F (ffs) Case A P.F (ffs) Case B P.F (ffs) Case C P.F (ffs) Seismic Units
P1- Earth pressure ½ x ka2 x γ2 x H2 x ffs 1.5 80.0 1.5 80.0 1.0 53.3 1.0 53.33 KN/m
P2- Earth pressure due ka2 x qL x H x ffs 1.5 48.00 1.5 48.00 0.0 0.00 0.50 16.00 KN/m
P3- Due to dead load ka2 x qd x H x ffs 1.5 26.84 1.5 26.84 1.0 17.89 1.00 17.89 KN/m
P4- Horizontal strip ffsx FL 1.5 0 1.5 0 1.0 0 0 0 KN/m
PIR 0.5 x am x g1 x H2 - - - - - - 1 36.58 KN/m
(50%)PAE 50% of (0.5 x KAE x g3 x H2) - - - - - - 1 13.24 KN/m
Rh-Total factored (P1+P2+P3+P4) for case 154.8 154.8 71.2 137.0 KN/m

Calculation of factored vertical loads (Rv)

65
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Calculation of factored vertical loads (Rv)
Type of Force Formula used P.F (ffs) Case A P.F (ffs) Case B P.F (ffs) Case C P.F (ffs) Seismic Units
V1-Self weight of γ1 x H x Lxffs 1.5 576.0 1 384.0 1.0 384.0 1.0 384.0 KN/m
V2- Due to live load qL x L x ffs 1.5 172.80 0 0.00 0.0 0.00 0.5 57.60 KN/m
V3- Due to dead load qd x L x ffs 1.5 97 1 64 1.0 64 1 64 KN/m
V4- Due to strip load ffsx SL 1.5 37.5 1 25.0 1.0 25.0 0 0.0 KN/m
RV-Total factored V1+V2+V3+V4 882.9 473.4 473.4 506.0 KN/m

Sliding along base

Formula used Case A Case B Case C Seismic Units
Sliding P1+P2+P3 Static And
154.8 154.8 71.2 137.0 KN/m
forces (P1+P2+P3+PIR +50 %
Resisting
force Rv* (tanØ'p/fms)+
509.8 273.3 273.3 292.1 KN/m
(Static)/ (c3*L/fms)
(Seismic)

Calculation of Disturbing moment (Md)

Moment Formula used Case A Case B Case C Units
Md1-Earth pressure P1 x H /3 106.7 106.7 71.1 KN-m
Md2- Live Load P2 x H /2 96.00 96.00 0.00 KN-m
Md3- Dead load P3 x H /2 54 54 36 KN-m
Md4- Horziontal strip P4 x H 0.0 0.0 0.0 KN-m
Md-Total factored Md1+Md2+Md3+Md4 256.3 256.3 106.9 KN-m

Calculation of overturning moment (Mo) Seismic

Moment Formula used Seismic Unit
MO1-Earth pressure P1 x H /3 71.11 KN-m
Mo2- Live Load P2 x H /2 32.00 KN-m
Mo3- Due to horizontal P3 x H /2 35.79 KN-m
Mo4- Due to horizontal PIRx H/2 73.2 KN-m
Mo5- Due to seismic 0.5x PAE x0.6x H 31.8 KN-m
Mo-Total factored Mo1+Mo2+Mo3+Mo4 243.81 KN-m

Calculation of Resistingt moment (M r )

Moment Formula used Case A Case B Case C Seismic Units
Mr1-Reinforced fill V1 x L /2 1382.4 921.6 921.6 921.6 KN-m
Mr2- Live Load V2 x Lc /2 414.7 0.0 0.0 - KN-m
Mr3- Dead load V3 x Lc /2 232 155 155 154.5984 KN-m
Mr4- Vertical strip load V4 x d 37.5 25.0 25.0 - KN-m
Mr-Total factored Mr1+Mr2+Mr3+Mr4 2066.5 1101.2 1101.2 1076.2 KN-m

Summary Table: -1
Case Rv Rh Mr Md Mo MRBP e,(m) Md/Rv L/6 ,(m)
A 882.9 154.8 2066.5 256.3 202.7 - 0.289 0.29 0.80
B 473.4 154.8 1101.2 256.3 202.7 - 0.502 0.54 0.80
C 473.4 71.2 1101.2 106.9 71.1 - 0.224 0.23 0.80
Seismic 506.0 137.0 1076.2 - 243.8 1214.4 0.48 - 1.60 L/3

66
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4 m
R0 MPL/RE/23/PW-1 19-Apr-23

Bearing pressure (qref) Mayerhoff (Base

distribution
length is Used)
Bearing pressure Formula used Case A Case B Case C Seismic Unit
qref Rv x/(L-2e) 209.1 124.7 108.8 131.9 KN/m2
qult cfNc+qNq+0.5(L-2e)g3Ng 1313.7 1218.3 1342.8 1227.3 KN/m2
qsafe qult./fms+gf*dm 958.4 890.2 979.1 896.7 KN/m2

Factor of saftey table

Permisibl
Bearing Overturni e e< L/6
Case failure ng Sliding Ecentricity ,e m FOS
A 4.58 8.06 3.29 0.289 0.800 2.77
B 7.14 4.3 1.77 0.502 0.800 1.59
C 9.00 10.3 3.84 0.224 0.800 3.57
Seismic 9.31 4.4 2.1 0.482 1.600 3.32
Wall External stablity status

Parameter Case A Case B Case C Seismic Req. F.O.S

Bearing
Safe Safe Safe Safe 1.4
General Shearfailure
Overturning Safe Safe Safe Safe 1.2
Sliding Safe Safe Safe Safe 1.2
Ecentricity Safe Safe Safe Safe 1

67
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4 m
R0 MPL/RE/23/PW-1 19-Apr-23

Internal stability analysis (Static)

A) Check for Rupture of reinforcement Q = 0.29

Case A
Elevation Vertical
Length of Strap Elevation
Strap from spacing
Strap ,L spacing from Top, Rhj Rvj Mdj Mrj Mo
layers base, hi of Strap,
(m) ,m hj ,m
,m Svj ,m
1 4.8 0.4 0.4 3.6 0.800 132.2 787.8 199.0 1890.8 155.5 0.0
2 4.8 0.8 1.2 2.8 0.800 91.6 672.6 109.9 1614.3 83.6 0.0
3 5.3 0.8 2.0 2.0 0.800 57.4 615.5 50.8 1631.0 37.3 0.0
4 6.3 0.8 2.8 1.2 0.800 29.7 580.4 16.4 1828.3 11.5 0.0
5 8.3 0.8 3.6 0.4 0.800 8.3 565.5 1.6 2346.7 1.1 0.0
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

68
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.5 1/6
0.25 3.80 183.44 48.92 2.63 0.0 0.0 51.55 12.16 0.05 Safe Safe
0.16 3.40 150.37 40.10 2.94 0.0 0.0 43.04 19.30 0.03 Safe Safe
0.08 3.00 119.86 31.96 3.33 0.0 0.0 35.30 43.69 0.02 Safe Safe
0.03 2.60 92.96 24.79 3.85 0.0 0.0 28.64 158.71 0.00 Safe Safe
0.00 2.20 68.18 18.18 4.55 0.0 0.0 22.73 2200.07 0.00 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

69
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Case B
Elevation Vertical
Length of Strap Elevation
Strap from spacing
Strap ,L spacing from Top, Rhj Rvj Mdj Mrj Mo
layers base, hi of Strap,
(m) ,m hj ,m
,m Svj ,m
1 4.8 0.4 0.4 3.6 0.8 132.16 410.02 199.00 984.0 155.52
2 4.8 0.8 1.2 2.8 0.8 91.59 333.22 109.93 799.7 83.63
3 5.3 0.8 2 2 0.8 57.42 283.13 50.75 750.3 37.33
4 6.3 0.8 2.8 1.2 0.8 29.65 235.75 16.35 742.6 11.52
5 8.3 0.8 3.6 0.4 0.8 8.28 177.79 1.60 737.8 1.07
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

70
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.35 1/6
0.49 3.80 107.07 28.55 1.75 0.0 0.0 30.31 6.327 0.101 Safe Safe
0.33 3.40 80.48 21.46 1.96 0.0 0.0 23.42 9.563 0.069 Safe Safe
0.18 3.00 57.30 15.28 2.22 0.0 0.0 17.50 20.097 0.034 Safe Safe
0.07 2.60 38.26 10.20 2.56 0.0 0.0 12.77 64.462 0.011 Safe Safe
0.01 2.20 21.47 5.72 3.03 0.0 0.0 8.75 691.699 0.001 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

71
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4 m
R0 MPL/RE/23/PW-1 19-Apr-23

Case C
Elevation Vertical
Length of Strap from Elevation spacing
Strap Strap ,L spacing base, hi from Top, of Strap,
layers (m) ,m ,m hj ,m Svj ,m Rhj Rvj Mdj Mrj Mo
1 4.8 0.4 0.4 3.6 0.8 59.30 410.02 80.83 984.04 51.84
2 4.8 0.8 1.2 2.8 0.8 38.66 333.22 41.93 799.72 24.39
3 5.3 0.8 2 2 0.8 22.28 283.13 17.84 750.28 8.89
4 6.3 0.8 2.8 1.2 0.8 10.17 235.75 5.14 742.60 1.92
5 8.3 0.8 3.6 0.4 0.8 2.32 177.79 0.43 737.81 0.07
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

72
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.35 1/6
0.20 3.80 93.06 24.82 1.75 0.0 0.0 26.57 18.98 0.04 Safe Safe
0.13 3.40 73.26 19.54 1.96 0.0 0.0 21.50 32.79 0.03 Safe Safe
0.06 3.00 54.72 14.59 2.22 0.0 0.0 16.81 84.41 0.01 Safe Safe
0.02 2.60 37.68 10.05 2.56 0.0 0.0 12.61 386.77 0.00 Safe Safe
0.00 2.20 21.43 5.72 3.03 0.0 0.0 8.75 10375.48 0.00 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

73
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4 m
R0 MPL/RE/23/PW-1 19-Apr-23

Seismic Analysis
Elevation Vertical
Length of Strap from Elevation spacing
Strap Strap ,L spacing base, hi from Top, of Strap,
layers (m) ,m ,m hj ,m Svj ,m Rhj Rvj Mo Mrj PI=Wa*Am
1 4.8 0.4 0.4 3.6 0.8 91.38 467.62 161.63 984.04 17.10
2 4.8 0.8 1.2 2.8 0.8 58.06 390.82 80.53 799.72 10.35
3 5.3 0.8 2 2 0.8 32.18 346.73 32.28 750.28 5.28
4 6.3 0.8 2.8 1.2 0.8 13.73 311.35 8.45 742.60 1.90
5 8.3 0.8 3.6 0.4 0.8 2.72 277.39 0.59 737.81 0.21
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

74
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Rsvj Check for Check for
Mr/Mo
Ecentricit (for overturni eccentrici
Dj svj Tpj Tmd Tj (Overturi e/L
y, ej Internal ngMr/Mo tye / L ≤
ning)
Sliding) ≥ 1.125 1/3
0.64 3.80 132.94 35.45 3.29 38.7 229.5 6.09 0.13 Safe Safe
0.56 3.40 106.19 28.32 1.79 30.1 191.8 9.93 0.12 Safe Safe
0.58 3.00 83.72 22.32 0.92 23.2 170.2 23.24 0.11 Safe Safe
0.79 2.60 66.02 17.61 0.38 18.0 152.8 87.84 0.13 Safe Safe
1.49 2.20 52.18 13.92 0.06 14.0 136.1 1256.43 0.18 Safe Safe
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

75
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Rupture check for Reinforcement FOS REQ = 1.000

MAX Tj
Strap CASE Width of Force per Width of FOS FOS
hj T avialable
Type A,B,C & Panel strip Strip Status Status
SEISMIC
3.60 60 KN 29.34 51.55 2.00 25.77 0.09 1.139 Safe
2.80 50 KN 24.46 43.04 2.00 21.52 0.09 1.136 Safe
2.00 40 KN 19.56 35.30 2.00 17.65 0.09 1.108 Safe
1.20 30 KN 14.67 28.64 2.00 14.32 0.09 1.025 Safe
0.40 30 KN 14.67 22.73 2.00 11.36 0.09 1.291 Safe
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -

76
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check For Internal Sliding
Strap
length Load case A Load case B Seismic Fos>=1.3 Fos>=1.3 Fos>=1.125
Rhj Rvj Rsvj FOS Rhj Rvj Rsvj FOS FOS Case A Case B Seismic
4.8 132.2 787.8 386.6 2.926 132.2 410.0 201.2 1.523 2.511 Safe Safe Safe
4.8 91.6 672.6 330.1 3.604 91.6 333.2 163.5 1.785 3.303 Safe Safe Safe
5.3 57.4 615.5 302.0 5.260 57.4 283.1 138.9 2.420 5.288 Safe Safe Safe
6.3 29.7 580.4 284.8 9.606 29.7 235.7 115.7 3.902 11.127 Safe Safe Safe
8.3 8.3 565.5 277.5 33.499 8.3 177.8 87.2 10.532 50.071 Safe Safe Safe
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -

77
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4 m
R0 MPL/RE/23/PW-1 19-Apr-23

Pull out or Adherence of Reinforcement check

(Pj) = Perimeter of jth layer total horizontal width of Strap of top and bottom faces = 0.180 m

Elevation Vertical Cofficient

Elevation Effective
from spacing Strap of
from Top, length of Case A Tj Puj FOS ≥ 1
base, hi of Strap, length Friction.
hj ,m Strap
,m Svj ,m m
3.6 0.4 0.8 4.8 4.57 51.55 0.491 79.56 1.543
2.8 1.2 0.8 4.8 4.11 43.04 0.491 58.12 1.350
2 2 0.8 5.3 4.15 35.30 0.491 45.14 1.279
1.2 2.8 0.8 6.3 4.68 28.64 0.491 35.73 1.248
0.4 3.6 0.8 8.3 6.22 22.73 0.491 27.17 1.195
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -

78
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4 m
R0 MPL/RE/23/PW-1 19-Apr-23

Pr
Seismic Pullout FoS nos of
Case B Tj Puj FOS Case C Tj Puj FOS Status
Tj Resistanc Pullout Strip/m
e
30.31 68.95 2.275 30.31 68.95 2.275 38.7 46.89 1.210 2 Safe
11.71 50.37 4.301 23.42 50.37 2.151 30.1 34.25 1.138 2 Safe
8.75 39.12 4.471 17.50 39.12 2.235 23.2 26.60 1.144 2 Safe
6.38 30.96 4.850 12.77 30.96 2.425 18.0 21.05 1.171 2 Safe
4.38 23.54 5.379 8.75 23.54 2.689 14.0 16.01 1.146 2 Safe
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

79
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4 m
R0 MPL/RE/23/PW-1 19-Apr-23

From Bottom Layer DESIGN HT=

4.000 m

Elevation
Strap Strap No. of
Sr No from
Grade Length Connector
bottom

1 60 KN 4.8 0.4 2
2 50 KN 4.8 1.2 2
3 40 KN 5.3 2.0 2
4 30 KN 6.3 2.8 2
5 30 KN 8.3 3.6 2
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -

80
5. CALCULATION FOR HEIGHT 4.8
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4.8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Wall Geometry
Height of facing H = 3.800 m
Soil Height (Earth crust) = 0.61 m
Embedment depth Dm = 1.00 m
Total height of the wall = 5.41 m
Design Height (H) = 4.800 m
Mechanical height (Hm) = 5.41 m
Minimum length of Reinforcement = 3.36 m (0.7*H)
Trail Length of Strap (L) = 3.36 m (Minimum Required)
Length of Strap (L) = 4.8 m
0

0
Dead load surcharge 2nd Tier + qd (Earth Crust) = 13.42 kPa
0 kPa
φ = 30.00 degree
δ = 20.00 degree
α 87.709 degree
β 0.00 degree
0

External stablity analysis (Static)

Length of Strap = 4.8 m
For reinforced soil:
Ka1 = (1-sinØ1)/(1+sinØ1)
0.333
Wall batter θ = 2.291 deg.

For retrained backfill soil:

Ka2 = (1-sinØ2)/(1+sinØ2)
0.333

Am = 0.23

ʎ = = 12.883088

α = 87.709
φ = 30.00
β = 0

KAE = 0.514 Considering Am>0

KAE 0.349 Considering Am=0

DKAE = 0.1654

Calculation of factored Horizontal load (Rh)

Type of Force Formula used P.F (ffs) Case A P.F (ffs) Case B P.F (ffs) Case C P.F (ffs) Seismic Units
P1- Earth pressure ½ x ka2 x γ2 x H2 x ffs 1.5 115.2 1.5 115.2 1.0 76.8 1.0 76.80 KN/m
P2- Earth pressure due ka2 x qL x H x ffs 1.5 57.60 1.5 57.60 0.0 0.00 0.50 19.20 KN/m
P3- Due to dead load ka2 x qd x H x ffs 1.5 32.21 1.5 32.21 1.0 21.47 1.00 21.47 KN/m
P4- Horizontal strip ffsx FL 1.5 0 1.5 0 1.0 0 0 0 KN/m
PIR 0.5 x am x g1 x H2 - - - - - - 1 52.67 KN/m
(50%)PAE 50% of (0.5 x KAE x g3 x H2) - - - - - - 1 19.06 KN/m
Rh-Total factored (P1+P2+P3+P4) for case 205.0 205.0 98.3 189.2 KN/m

Calculation of factored vertical loads (Rv)

82
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4.8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Calculation of factored vertical loads (Rv)
Type of Force Formula used P.F (ffs) Case A P.F (ffs) Case B P.F (ffs) Case C P.F (ffs) Seismic Units
V1-Self weight of γ1 x H x Lxffs 1.5 691.2 1 460.8 1.0 460.8 1.0 460.8 KN/m
V2- Due to live load qL x L x ffs 1.5 172.80 0 0.00 0.0 0.00 0.5 57.60 KN/m
V3- Due to dead load qd x L x ffs 1.5 97 1 64 1.0 64 1 64 KN/m
V4- Due to strip load ffsx SL 1.5 37.5 1 25.0 1.0 25.0 0 0.0 KN/m
RV-Total factored V1+V2+V3+V4 998.1 550.2 550.2 582.8 KN/m

Sliding along base

Formula used Case A Case B Case C Seismic Units
Sliding P1+P2+P3 Static And
205.0 205.0 98.3 189.2 KN/m
forces (P1+P2+P3+PIR +50 %
Resisting
force Rv* (tanØ'p/fms)+
576.3 317.7 317.7 336.5 KN/m
(Static)/ (c3*L/fms)
(Seismic)

Calculation of Disturbing moment (Md)

Moment Formula used Case A Case B Case C Units
Md1-Earth pressure P1 x H /3 184.3 184.3 122.9 KN-m
Md2- Live Load P2 x H /2 138.24 138.24 0.00 KN-m
Md3- Dead load P3 x H /2 77 77 52 KN-m
Md4- Horziontal strip P4 x H 0.0 0.0 0.0 KN-m
Md-Total factored Md1+Md2+Md3+Md4 399.9 399.9 174.4 KN-m

Calculation of overturning moment (Mo) Seismic

Moment Formula used Seismic Unit
MO1-Earth pressure P1 x H /3 122.88 KN-m
Mo2- Live Load P2 x H /2 46.08 KN-m
Mo3- Due to horizontal P3 x H /2 51.53 KN-m
Mo4- Due to horizontal PIRx H/2 126.4 KN-m
Mo5- Due to seismic 0.5x PAE x0.6x H 54.9 KN-m
Mo-Total factored Mo1+Mo2+Mo3+Mo4 401.79 KN-m

Calculation of Resistingt moment (M r )

Moment Formula used Case A Case B Case C Seismic Units
Mr1-Reinforced fill V1 x L /2 1658.9 1105.9 1105.9 1105.9 KN-m
Mr2- Live Load V2 x Lc /2 414.7 0.0 0.0 - KN-m
Mr3- Dead load V3 x Lc /2 232 155 155 154.5984 KN-m
Mr4- Vertical strip load V4 x d 37.5 25.0 25.0 - KN-m
Mr-Total factored Mr1+Mr2+Mr3+Mr4 2343.0 1285.5 1285.5 1260.5 KN-m

Summary Table: -1
Case Rv Rh Mr Md Mo MRBP e,(m) Md/Rv L/6 ,(m)
A 998.1 205.0 2343.0 399.9 322.6 - 0.376 0.40 0.80
B 550.2 205.0 1285.5 399.9 322.6 - 0.650 0.73 0.80
C 550.2 98.3 1285.5 174.4 122.9 - 0.287 0.32 0.80
Seismic 582.8 189.2 1260.5 - 401.8 1398.8 0.69 - 1.60 L/3

83
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4.8 m
R0 MPL/RE/23/PW-1 19-Apr-23

Bearing pressure (qref) Mayerhoff (Base

distribution
length is Used)
Bearing pressure Formula used Case A Case B Case C Seismic Unit
qref Rv x/(L-2e) 246.5 157.2 130.2 170.4 KN/m2
qult cfNc+qNq+0.5(L-2e)g3Ng 1274.9 1152.1 1314.7 1134.4 KN/m2
qsafe qult./fms+gf*dm 930.6 842.9 959.0 830.3 KN/m2

Factor of saftey table

Permisibl
Bearing Overturni e e< L/6
Case failure ng Sliding Ecentricity ,e m FOS
A 3.77 5.86 2.81 0.376 0.800 2.13
B 5.36 3.2 1.55 0.650 0.800 1.23
C 7.37 7.4 3.23 0.287 0.800 2.79
Seismic 6.66 3.1 1.8 0.689 1.600 2.32
Wall External stablity status

Parameter Case A Case B Case C Seismic Req. F.O.S

Bearing
Safe Safe Safe Safe 1.4
General Shearfailure
Overturning Safe Safe Safe Safe 1.2
Sliding Safe Safe Safe Safe 1.2
Ecentricity Safe Safe Safe Safe 1

84
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4.8 m
R0 MPL/RE/23/PW-1 19-Apr-23

Internal stability analysis (Static)

A) Check for Rupture of reinforcement Q = 0.29

Case A
Elevation Vertical
Length of Strap Elevation
Strap from spacing
Strap ,L spacing from Top, Rhj Rvj Mdj Mrj Mo
layers base, hi of Strap,
(m) ,m hj ,m
,m Svj ,m
1 4.8 0.4 0.4 4.4 0.800 179.1 903.0 323.1 2167.3 258.1 0.0
2 4.9 0.8 1.2 3.6 0.800 132.2 804.2 199.0 1970.4 155.5 0.0
3 5.2 0.8 2.0 2.8 0.800 91.6 728.7 109.9 1894.6 83.6 0.0
4 5.7 0.8 2.8 2.0 0.800 57.4 661.9 50.8 1886.5 37.3 0.0
5 6.7 0.8 3.6 1.2 0.800 29.7 617.3 16.4 2067.9 11.5 0.0
6 8.7 0.8 4.4 0.4 0.800 8.3 592.7 1.6 2578.4 1.1 0.0
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

85
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4.8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.5 1/6
0.36 4.20 221.09 58.96 2.38 0.0 0.0 61.34 8.40 0.07 Safe Safe
0.25 3.80 182.57 48.68 2.63 0.0 0.0 51.32 12.67 0.05 Safe Safe
0.15 3.40 148.76 39.67 2.94 0.0 0.0 42.61 22.65 0.03 Safe Safe
0.08 3.00 119.34 31.82 3.33 0.0 0.0 35.16 50.53 0.01 Safe Safe
0.03 2.60 92.86 24.76 3.85 0.0 0.0 28.61 179.50 0.00 Safe Safe
0.00 2.20 68.17 18.18 4.55 0.0 0.0 22.72 2417.23 0.00 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

86
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4.8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Case B
Elevation Vertical
Length of Strap Elevation
Strap from spacing
Strap ,L spacing from Top, Rhj Rvj Mdj Mrj Mo
layers base, hi of Strap,
(m) ,m hj ,m
,m Svj ,m
1 4.8 0.4 0.4 4.4 0.8 179.12 486.82 323.09 1168.4 258.13
2 4.9 0.8 1.2 3.6 0.8 132.16 418.56 199.00 1025.5 155.52
3 5.2 0.8 2 2.8 0.8 91.59 360.98 109.93 938.6 83.63
4 5.7 0.8 2.8 2 0.8 57.42 304.49 50.75 867.8 37.33
5 6.7 0.8 3.6 1.2 0.8 29.65 250.71 16.35 839.9 11.52
6 8.7 0.8 4.4 0.4 0.8 8.28 186.35 1.60 810.6 1.07
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

87
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4.8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.35 1/6
0.66 4.20 140.19 37.38 1.59 0.0 0.0 38.97 4.526 0.138 Safe Safe
0.48 3.80 105.99 28.26 1.75 0.0 0.0 30.02 6.594 0.097 Safe Safe
0.30 3.40 78.63 20.97 1.96 0.0 0.0 22.93 11.223 0.059 Safe Safe
0.17 3.00 56.74 15.13 2.22 0.0 0.0 17.35 23.245 0.029 Safe Safe
0.07 2.60 38.16 10.18 2.56 0.0 0.0 12.74 72.907 0.010 Safe Safe
0.01 2.20 21.46 5.72 3.03 0.0 0.0 8.75 759.975 0.001 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

88
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4.8 m
R0 MPL/RE/23/PW-1 19-Apr-23

Case C
Elevation Vertical
Length of Strap from Elevation spacing
Strap Strap ,L spacing base, hi from Top, of Strap,
layers (m) ,m ,m hj ,m Svj ,m Rhj Rvj Mdj Mrj Mo
1 4.8 0.4 0.4 4.4 0.8 84.22 486.82 137.95 1168.36 94.65
2 4.9 0.8 1.2 3.6 0.8 59.30 418.56 80.83 1025.47 51.84
3 5.2 0.8 2 2.8 0.8 38.66 360.98 41.93 938.56 24.39
4 5.7 0.8 2.8 2 0.8 22.28 304.49 17.84 867.81 8.89
5 6.7 0.8 3.6 1.2 0.8 10.17 250.71 5.14 839.89 1.92
6 8.7 0.8 4.4 0.4 0.8 2.32 186.35 0.43 810.64 0.07
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

89
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4.8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.35 1/6
0.28 4.20 115.00 30.67 1.59 0.0 0.0 32.25 12.34 0.06 Safe Safe
0.19 3.80 92.73 24.73 1.75 0.0 0.0 26.48 19.78 0.04 Safe Safe
0.12 3.40 72.67 19.38 1.96 0.0 0.0 21.34 38.48 0.02 Safe Safe
0.06 3.00 54.54 14.54 2.22 0.0 0.0 16.77 97.63 0.01 Safe Safe
0.02 2.60 37.65 10.04 2.56 0.0 0.0 12.60 437.44 0.00 Safe Safe
0.00 2.20 21.43 5.72 3.03 0.0 0.0 8.75 11399.62 0.00 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

90
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4.8 m
R0 MPL/RE/23/PW-1 19-Apr-23

Seismic Analysis
Elevation Vertical
Length of Strap from Elevation spacing
Strap Strap ,L spacing base, hi from Top, of Strap,
layers (m) ,m ,m hj ,m Svj ,m Rhj Rvj Mo Mrj PI=Wa*Am
1 4.8 0.4 0.4 4.4 0.8 132.13 544.42 285.34 1168.36 25.55
2 4.9 0.8 1.2 3.6 0.8 91.38 477.36 162.50 1025.47 17.10
3 5.2 0.8 2 2.8 0.8 58.06 423.38 81.05 938.56 10.35
4 5.7 0.8 2.8 2 0.8 32.18 372.89 32.55 867.81 5.28
5 6.7 0.8 3.6 1.2 0.8 13.73 331.11 8.55 839.89 1.90
6 8.7 0.8 4.4 0.4 0.8 2.72 290.75 0.60 810.64 0.21
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

91
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4.8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Rsvj Check for Check for
Mr/Mo
Ecentricit (for overturni eccentrici
Dj svj Tpj Tmd Tj (Overturi e/L
y, ej Internal ngMr/Mo tye / L ≤
ning)
Sliding) ≥ 1.125 1/3
0.78 4.20 167.83 44.75 4.22 49.0 267.2 4.09 0.16 Safe Safe
0.64 3.80 132.03 35.21 2.60 37.8 234.3 6.31 0.13 Safe Safe
0.57 3.40 104.52 27.87 1.51 29.4 207.8 11.58 0.11 Safe Safe
0.61 3.00 83.24 22.20 0.78 23.0 183.0 26.66 0.11 Safe Safe
0.84 2.60 65.94 17.58 0.32 17.9 162.5 98.24 0.13 Safe Safe
1.56 2.20 52.18 13.91 0.05 14.0 142.7 1355.82 0.18 Safe Safe
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

92
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4.8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Rupture check for Reinforcement FOS REQ = 1.000

MAX Tj
Strap CASE Width of Force per Width of FOS FOS
hj T avialable
Type A,B,C & Panel strip Strip Status Status
SEISMIC
4.40 75 KN 36.68 61.34 2.00 30.67 0.09 1.196 Safe
3.60 60 KN 29.34 51.32 2.00 25.66 0.09 1.144 Safe
2.80 50 KN 24.46 42.61 2.00 21.31 0.09 1.148 Safe
2.00 40 KN 19.56 35.16 2.00 17.58 0.09 1.113 Safe
1.20 30 KN 14.67 28.61 2.00 14.30 0.09 1.026 Safe
0.40 30 KN 14.67 22.72 2.00 11.36 0.09 1.291 Safe
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -

93
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4.8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check For Internal Sliding
Strap
length Load case A Load case B Seismic Fos>=1.3 Fos>=1.3 Fos>=1.125
Rhj Rvj Rsvj FOS Rhj Rvj Rsvj FOS FOS Case A Case B Seismic
4.8 179.1 903.0 443.2 2.474 179.1 486.8 238.9 1.334 2.022 Safe Safe Safe
4.9 132.2 804.2 394.7 2.986 132.2 418.6 205.4 1.554 2.564 Safe Safe Safe
5.2 91.6 728.7 357.6 3.904 91.6 361.0 177.2 1.934 3.578 Safe Safe Safe
5.7 57.4 661.9 324.8 5.657 57.4 304.5 149.4 2.602 5.687 Safe Safe Safe
6.7 29.7 617.3 302.9 10.216 29.7 250.7 123.0 4.149 11.833 Safe Safe Safe
8.7 8.3 592.7 290.9 35.114 8.3 186.4 91.5 11.040 52.484 Safe Safe Safe
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -

94
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4.8 m
R0 MPL/RE/23/PW-1 19-Apr-23

Pull out or Adherence of Reinforcement check

(Pj) = Perimeter of jth layer total horizontal width of Strap of top and bottom faces = 0.180 m

Elevation Vertical Cofficient

Elevation Effective
from spacing Strap of
from Top, length of Case A Tj Puj FOS ≥ 1
base, hi of Strap, length Friction.
hj ,m Strap
,m Svj ,m m
4.4 0.4 0.8 4.8 4.57 61.34 0.491 94.46 1.540
3.6 1.2 0.8 4.9 4.21 51.32 0.491 73.26 1.428
2.8 2 0.8 5.2 4.05 42.61 0.491 57.25 1.343
2 2.8 0.8 5.7 4.08 35.16 0.491 44.47 1.265
1.2 3.6 0.8 6.7 4.62 28.61 0.491 35.25 1.232
0.4 4.4 0.8 8.7 6.16 22.72 0.491 26.90 1.184
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -

95
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4.8 m
R0 MPL/RE/23/PW-1 19-Apr-23

Pr
Seismic Pullout FoS nos of
Case B Tj Puj FOS Case C Tj Puj FOS Status
Tj Resistanc Pullout Strip/m
e
38.97 81.87 2.101 38.97 81.87 2.101 49.0 55.67 1.137 2 Safe
15.01 63.49 4.230 30.02 63.49 2.115 37.8 43.17 1.142 2 Safe
11.46 49.61 4.328 22.93 49.61 2.164 29.4 33.74 1.148 2 Safe
8.68 38.54 4.442 17.35 38.54 2.221 23.0 26.21 1.141 2 Safe
6.37 30.55 4.796 12.74 30.55 2.398 17.9 20.78 1.161 2 Safe
4.38 23.31 5.326 8.75 23.31 2.663 14.0 15.85 1.135 2 Safe
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

96
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 4.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 4.8 m
R0 MPL/RE/23/PW-1 19-Apr-23

From Bottom Layer DESIGN HT=

4.800 m

Elevation
Strap Strap No. of
Sr No from
Grade Length Connector
bottom

1 75 KN 4.8 0.4 2
2 60 KN 4.9 1.2 2
3 50 KN 5.2 2.0 2
4 40 KN 5.7 2.8 2
5 30 KN 6.7 3.6 2
6 30 KN 8.7 4.4 2
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -

97
6. CALCULATION FOR HEIGHT 5.6
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 5.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 5.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Wall Geometry
Height of facing H = 4.600 m
Soil Height (Earth crust) = 0.61 m
Embedment depth Dm = 1.00 m
Total height of the wall = 6.21 m
Design Height (H) = 5.600 m
Mechanical height (Hm) = 6.21 m
Minimum length of Reinforcement = 3.92 m (0.7*H)
Trail Length of Strap (L) = 3.92 m (Minimum Required)
Length of Strap (L) = 5.5 m
0

0
Dead load surcharge 2nd Tier + qd (Earth Crust) = 13.42 kPa
0 kPa
φ = 30.00 degree
δ = 20.00 degree
α 87.709 degree
β 0.00 degree
0

External stablity analysis (Static)

Length of Strap = 5.5 m
For reinforced soil:
Ka1 = (1-sinØ1)/(1+sinØ1)
0.333
Wall batter θ = 2.291 deg.

For retrained backfill soil:

Ka2 = (1-sinØ2)/(1+sinØ2)
0.333

Am = 0.23

ʎ = = 12.883088

α = 87.709
φ = 30.00
β = 0

KAE = 0.514 Considering Am>0

KAE 0.349 Considering Am=0

DKAE = 0.1654

Calculation of factored Horizontal load (Rh)

Type of Force Formula used P.F (ffs) Case A P.F (ffs) Case B P.F (ffs) Case C P.F (ffs) Seismic Units
P1- Earth pressure ½ x ka2 x γ2 x H2 x ffs 1.5 156.8 1.5 156.8 1.0 104.5 1.0 104.53 KN/m
P2- Earth pressure due ka2 x qL x H x ffs 1.5 67.20 1.5 67.20 0.0 0.00 0.50 22.40 KN/m
P3- Due to dead load ka2 x qd x H x ffs 1.5 37.58 1.5 37.58 1.0 25.05 1.00 25.05 KN/m
P4- Horizontal strip ffsx FL 1.5 0 1.5 0 1.0 0 0 0 KN/m
PIR 0.5 x am x g1 x H2 - - - - - - 1 71.69 KN/m
(50%)PAE 50% of (0.5 x KAE x g3 x H2) - - - - - - 1 25.94 KN/m
Rh-Total factored (P1+P2+P3+P4) for case 261.6 261.6 129.6 249.6 KN/m

Calculation of factored vertical loads (Rv)

99
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 5.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 5.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Calculation of factored vertical loads (Rv)
Type of Force Formula used P.F (ffs) Case A P.F (ffs) Case B P.F (ffs) Case C P.F (ffs) Seismic Units
V1-Self weight of γ1 x H x Lxffs 1.5 924.0 1 616.0 1.0 616.0 1.0 616.0 KN/m
V2- Due to live load qL x L x ffs 1.5 198.00 0 0.00 0.0 0.00 0.5 66.00 KN/m
V3- Due to dead load qd x L x ffs 1.5 111 1 74 1.0 74 1 74 KN/m
V4- Due to strip load ffsx SL 1.5 37.5 1 25.0 1.0 25.0 0 0.0 KN/m
RV-Total factored V1+V2+V3+V4 1270.2 714.8 714.8 755.8 KN/m

Sliding along base

Formula used Case A Case B Case C Seismic Units
Sliding P1+P2+P3 Static And
261.6 261.6 129.6 249.6 KN/m
forces (P1+P2+P3+PIR +50 %
Resisting
force Rv* (tanØ'p/fms)+
733.4 412.7 412.7 436.4 KN/m
(Static)/ (c3*L/fms)
(Seismic)

Calculation of Disturbing moment (Md)

Moment Formula used Case A Case B Case C Units
Md1-Earth pressure P1 x H /3 292.7 292.7 195.1 KN-m
Md2- Live Load P2 x H /2 188.16 188.16 0.00 KN-m
Md3- Dead load P3 x H /2 105 105 70 KN-m
Md4- Horziontal strip P4 x H 0.0 0.0 0.0 KN-m
Md-Total factored Md1+Md2+Md3+Md4 586.1 586.1 265.3 KN-m

Calculation of overturning moment (Mo) Seismic

Moment Formula used Seismic Unit
MO1-Earth pressure P1 x H /3 195.13 KN-m
Mo2- Live Load P2 x H /2 62.72 KN-m
Mo3- Due to horizontal P3 x H /2 70.14 KN-m
Mo4- Due to horizontal PIRx H/2 200.7 KN-m
Mo5- Due to seismic 0.5x PAE x0.6x H 87.2 KN-m
Mo-Total factored Mo1+Mo2+Mo3+Mo4 615.88 KN-m

Calculation of Resistingt moment (M r )

Moment Formula used Case A Case B Case C Seismic Units
Mr1-Reinforced fill V1 x L /2 2541.0 1694.0 1694.0 1694.0 KN-m
Mr2- Live Load V2 x Lc /2 544.5 0.0 0.0 - KN-m
Mr3- Dead load V3 x Lc /2 304 203 203 202.9775 KN-m
Mr4- Vertical strip load V4 x d 37.5 25.0 25.0 - KN-m
Mr-Total factored Mr1+Mr2+Mr3+Mr4 3427.5 1922.0 1922.0 1897.0 KN-m

Summary Table: -1
Case Rv Rh Mr Md Mo MRBP e,(m) Md/Rv L/6 ,(m)
A 1270.2 261.6 3427.5 586.1 480.9 - 0.430 0.46 0.92
B 714.8 261.6 1922.0 586.1 480.9 - 0.734 0.82 0.92
C 714.8 129.6 1922.0 265.3 195.1 - 0.334 0.37 0.92
Seismic 755.8 249.6 1897.0 - 615.9 2078.5 0.81 - 1.83 L/3

100
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 5.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 5.6 m
R0 MPL/RE/23/PW-1 19-Apr-23

Bearing pressure (qref) Mayerhoff (Base

distribution
length is Used)
Bearing pressure Formula used Case A Case B Case C Seismic Unit
qref Rv x/(L-2e) 273.8 177.3 147.9 195.3 KN/m2
qult cfNc+qNq+0.5(L-2e)g3Ng 1407.3 1271.2 1450.3 1234.9 KN/m2
qsafe qult./fms+gf*dm 1025.2 928.0 1055.9 902.1 KN/m2

Factor of saftey table

Permisibl
Bearing Overturni e e< L/6
Case failure ng Sliding Ecentricity ,e m FOS
A 3.74 5.85 2.80 0.430 0.917 2.13
B 5.23 3.3 1.58 0.734 0.917 1.25
C 7.14 7.2 3.18 0.334 0.917 2.74
Seismic 6.32 3.1 1.7 0.815 1.833 2.25
Wall External stablity status

Parameter Case A Case B Case C Seismic Req. F.O.S

Bearing
Safe Safe Safe Safe 1.4
General Shearfailure
Overturning Safe Safe Safe Safe 1.2
Sliding Safe Safe Safe Safe 1.2
Ecentricity Safe Safe Safe Safe 1

101
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 5.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 5.6 m
R0 MPL/RE/23/PW-1 19-Apr-23

Internal stability analysis (Static)

A) Check for Rupture of reinforcement Q = 0.29

Case A
Elevation Vertical
Length of Strap Elevation
Strap from spacing
Strap ,L spacing from Top, Rhj Rvj Mdj Mrj Mo
layers base, hi of Strap,
(m) ,m hj ,m
,m Svj ,m
1 5.5 0.4 0.4 5.2 0.800 232.5 1166.7 487.3 3208.5 396.6 0.0
2 5.2 0.8 1.2 4.4 0.800 179.1 978.3 323.1 2543.5 258.1 0.0
3 5.5 0.8 2.0 3.6 0.800 132.2 902.7 199.0 2482.5 155.5 0.0
4 5.7 0.8 2.8 2.8 0.800 91.6 798.7 109.9 2276.4 83.6 0.0
5 6.2 0.8 3.6 2.0 0.800 57.4 720.0 50.8 2232.0 37.3 0.0
6 7.2 0.8 4.4 1.2 0.800 29.7 663.3 16.4 2388.0 11.5 0.0
7 9.2 0.8 5.2 0.4 0.800 8.3 626.8 1.6 2883.3 1.1 0.0
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

102
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 5.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 5.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.5 1/6
0.42 4.60 250.12 66.70 2.17 0.0 0.0 68.87 8.09 0.08 Safe Safe
0.33 4.20 215.50 57.47 2.38 0.0 0.0 59.85 9.85 0.06 Safe Safe
0.22 3.80 178.43 47.58 2.63 0.0 0.0 50.21 15.96 0.04 Safe Safe
0.14 3.40 147.24 39.26 2.94 0.0 0.0 42.21 27.22 0.02 Safe Safe
0.07 3.00 118.83 31.69 3.33 0.0 0.0 35.02 59.79 0.01 Safe Safe
0.02 2.60 92.77 24.74 3.85 0.0 0.0 28.58 207.29 0.00 Safe Safe
0.00 2.20 68.17 18.18 4.55 0.0 0.0 22.72 2703.06 0.00 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

103
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 5.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 5.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Case B
Elevation Vertical
Length of Strap Elevation
Strap from spacing
Strap ,L spacing from Top, Rhj Rvj Mdj Mrj Mo
layers base, hi of Strap,
(m) ,m hj ,m
,m Svj ,m
1 5.5 0.4 0.4 5.2 0.8 232.49 645.81 487.31 1776.0 396.59
2 5.2 0.8 1.2 4.4 0.8 179.12 527.38 323.09 1371.2 258.13
3 5.5 0.8 2 3.6 0.8 132.16 469.81 199.00 1292.0 155.52
4 5.7 0.8 2.8 2.8 0.8 91.59 395.69 109.93 1127.7 83.63
5 6.2 0.8 3.6 2 0.8 57.42 331.20 50.75 1026.7 37.33
6 7.2 0.8 4.4 1.2 0.8 29.65 269.42 16.35 969.9 11.52
7 9.2 0.8 5.2 0.4 0.8 8.28 197.06 1.60 906.5 1.07
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

104
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 5.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 5.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.35 1/6
0.75 4.60 161.82 43.15 1.45 0.0 0.0 44.60 4.478 0.137 Safe Safe
0.61 4.20 132.68 35.38 1.59 0.0 0.0 36.97 5.312 0.118 Safe Safe
0.42 3.80 100.97 26.93 1.75 0.0 0.0 28.68 8.307 0.077 Safe Safe
0.28 3.40 76.92 20.51 1.96 0.0 0.0 22.47 13.485 0.049 Safe Safe
0.15 3.00 56.20 14.99 2.22 0.0 0.0 17.21 27.502 0.025 Safe Safe
0.06 2.60 38.06 10.15 2.56 0.0 0.0 12.71 84.195 0.008 Safe Safe
0.01 2.20 21.46 5.72 3.03 0.0 0.0 8.75 849.838 0.001 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

105
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 5.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 5.6 m
R0 MPL/RE/23/PW-1 19-Apr-23

Case C
Elevation Vertical
Length of Strap from Elevation spacing
Strap Strap ,L spacing base, hi from Top, of Strap,
layers (m) ,m ,m hj ,m Svj ,m Rhj Rvj Mdj Mrj Mo
1 5.5 0.4 0.4 5.2 0.8 113.39 645.81 216.71 1775.98 156.23
2 5.2 0.8 1.2 4.4 0.8 84.22 527.38 137.95 1371.20 94.65
3 5.5 0.8 2 3.6 0.8 59.30 469.81 80.83 1291.98 51.84
4 5.7 0.8 2.8 2.8 0.8 38.66 395.69 41.93 1127.73 24.39
5 6.2 0.8 3.6 2 0.8 22.28 331.20 17.84 1026.73 8.89
6 7.2 0.8 4.4 1.2 0.8 10.17 269.42 5.14 969.93 1.92
7 9.2 0.8 5.2 0.4 0.8 2.32 197.06 0.43 906.49 0.07
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

106
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 5.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 5.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.35 1/6
0.34 4.60 133.74 35.66 1.45 0.0 0.0 37.11 11.37 0.06 Safe Safe
0.26 4.20 112.76 30.07 1.59 0.0 0.0 31.66 14.49 0.05 Safe Safe
0.17 3.80 91.12 24.30 1.75 0.0 0.0 26.05 24.92 0.03 Safe Safe
0.11 3.40 72.10 19.23 1.96 0.0 0.0 21.19 46.24 0.02 Safe Safe
0.05 3.00 54.36 14.50 2.22 0.0 0.0 16.72 115.51 0.01 Safe Safe
0.02 2.60 37.62 10.03 2.56 0.0 0.0 12.60 505.17 0.00 Safe Safe
0.00 2.20 21.43 5.71 3.03 0.0 0.0 8.75 12747.58 0.00 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

107
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 5.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 5.6 m
R0 MPL/RE/23/PW-1 19-Apr-23

Seismic Analysis
Elevation Vertical
Length of Strap from Elevation spacing
Strap Strap ,L spacing base, hi from Top, of Strap,
layers (m) ,m ,m hj ,m Svj ,m Rhj Rvj Mo Mrj PI=Wa*Am
1 5.5 0.4 0.4 5.2 0.8 180.32 711.81 459.83 1775.98 35.69
2 5.2 0.8 1.2 4.4 0.8 132.13 589.78 286.63 1371.20 25.55
3 5.5 0.8 2 3.6 0.8 91.38 535.81 163.36 1291.98 17.10
4 5.7 0.8 2.8 2.8 0.8 58.06 464.09 81.57 1127.73 10.35
5 6.2 0.8 3.6 2 0.8 32.18 405.60 32.82 1026.73 5.28
6 7.2 0.8 4.4 1.2 0.8 13.73 355.82 8.65 969.93 1.90
7 9.2 0.8 5.2 0.4 0.8 2.72 307.46 0.61 906.49 0.21
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

108
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 5.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 5.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Rsvj Check for Check for
Mr/Mo
Ecentricit (for overturni eccentrici
Dj svj Tpj Tmd Tj (Overturi e/L
y, ej Internal ngMr/Mo tye / L ≤
ning)
Sliding) ≥ 1.125 1/3
0.90 4.60 192.48 51.33 5.67 57.0 349.3 3.86 0.16 Safe Safe
0.76 4.20 160.36 42.76 3.47 46.2 289.4 4.78 0.15 Safe Safe
0.64 3.80 127.19 33.92 2.24 36.2 262.9 7.91 0.12 Safe Safe
0.60 3.40 102.94 27.45 1.27 28.7 227.8 13.82 0.10 Safe Safe
0.65 3.00 82.76 22.07 0.66 22.7 199.0 31.29 0.10 Safe Safe
0.90 2.60 65.86 17.56 0.27 17.8 174.6 112.19 0.12 Safe Safe
1.65 2.20 52.18 13.91 0.04 14.0 150.9 1489.57 0.18 Safe Safe
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

109
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 5.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 5.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Rupture check for Reinforcement FOS REQ = 1.000

MAX Tj
Strap CASE Width of Force per Width of FOS FOS
hj T avialable
Type A,B,C & Panel strip Strip Status Status
SEISMIC
5.20 75 KN 36.68 68.87 2.00 34.44 0.09 1.065 Safe
4.40 75 KN 36.68 59.85 2.00 29.92 0.09 1.226 Safe
3.60 60 KN 29.34 50.21 2.00 25.11 0.09 1.169 Safe
2.80 50 KN 24.46 42.21 2.00 21.10 0.09 1.159 Safe
2.00 40 KN 19.56 35.02 2.00 17.51 0.09 1.117 Safe
1.20 30 KN 14.67 28.58 2.00 14.29 0.09 1.027 Safe
0.40 30 KN 14.67 22.72 2.00 11.36 0.09 1.291 Safe
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -

110
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 5.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 5.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check For Internal Sliding
Strap
length Load case A Load case B Seismic Fos>=1.3 Fos>=1.3 Fos>=1.125
Rhj Rvj Rsvj FOS Rhj Rvj Rsvj FOS FOS Case A Case B Seismic
5.5 232.5 1166.7 572.6 2.463 232.5 645.8 316.9 1.363 1.937 Safe Safe Safe
5.2 179.1 978.3 480.1 2.680 179.1 527.4 258.8 1.445 2.190 Safe Safe Safe
5.5 132.2 902.7 443.0 3.352 132.2 469.8 230.6 1.745 2.877 Safe Safe Safe
5.7 91.6 798.7 392.0 4.280 91.6 395.7 194.2 2.120 3.922 Safe Safe Safe
6.2 57.4 720.0 353.3 6.154 57.4 331.2 162.5 2.831 6.185 Safe Safe Safe
7.2 29.7 663.3 325.5 10.978 29.7 269.4 132.2 4.459 12.716 Safe Safe Safe
9.2 8.3 626.8 307.6 37.132 8.3 197.1 96.7 11.674 55.500 Safe Safe Safe
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -

111
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 5.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 5.6 m
R0 MPL/RE/23/PW-1 19-Apr-23

Pull out or Adherence of Reinforcement check

(Pj) = Perimeter of jth layer total horizontal width of Strap of top and bottom faces = 0.180 m

Elevation Vertical Cofficient

Elevation Effective
from spacing Strap of
from Top, length of Case A Tj Puj FOS ≥ 1
base, hi of Strap, length Friction.
hj ,m Strap
,m Svj ,m m
5.2 0.4 0.8 5.5 5.27 68.87 0.491 126.12 1.831
4.4 1.2 0.8 5.2 4.51 59.85 0.491 93.18 1.557
3.6 2 0.8 5.5 4.35 50.21 0.491 75.66 1.507
2.8 2.8 0.8 5.7 4.08 42.21 0.491 57.79 1.369
2 3.6 0.8 6.2 4.12 35.02 0.491 44.88 1.282
1.2 4.4 0.8 7.2 4.66 28.58 0.491 35.54 1.244
0.4 5.2 0.8 9.2 6.20 22.72 0.491 27.06 1.191
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -

112
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 5.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 5.6 m
R0 MPL/RE/23/PW-1 19-Apr-23

Pr
Seismic Pullout FoS nos of
Case B Tj Puj FOS Case C Tj Puj FOS Status
Tj Resistanc Pullout Strip/m
e
44.60 109.30 2.451 44.60 109.30 2.451 57.0 74.33 1.304 2 Safe
18.48 80.76 4.369 36.97 80.76 2.184 46.2 54.92 1.188 2 Safe
14.34 65.58 4.573 28.68 65.58 2.286 36.2 44.59 1.233 2 Safe
11.24 50.08 4.457 22.47 50.08 2.229 28.7 34.05 1.186 2 Safe
8.60 38.90 4.521 17.21 38.90 2.260 22.7 26.45 1.164 2 Safe
6.36 30.80 4.846 12.71 30.80 2.423 17.8 20.95 1.175 2 Safe
4.38 23.45 5.359 8.75 23.45 2.680 14.0 15.95 1.143 2 Safe
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

113
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 5.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 5.6 m
R0 MPL/RE/23/PW-1 19-Apr-23

From Bottom Layer DESIGN HT=

5.600 m

Elevation
Strap Strap No. of
Sr No from
Grade Length Connector
bottom

1 75 KN 5.5 0.4 2
2 75 KN 5.2 1.2 2
3 60 KN 5.5 2.0 2
4 50 KN 5.7 2.8 2
5 40 KN 6.2 3.6 2
6 30 KN 7.2 4.4 2
7 30 KN 9.2 5.2 2
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -

114
7. CALCULATION FOR HEIGHT 6.4
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 6.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 6.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Wall Geometry
Height of facing H = 5.400 m
Soil Height (Earth crust) = 0.61 m
Embedment depth Dm = 1.00 m
Total height of the wall = 7.01 m
Design Height (H) = 6.400 m
Mechanical height (Hm) = 7.01 m
Minimum length of Reinforcement = 4.48 m (0.7*H)
Trail Length of Strap (L) = 4.48 m (Minimum Required)
Length of Strap (L) = 6 m
0

0
Dead load surcharge 2nd Tier + qd (Earth Crust) = 13.42 kPa
0 kPa
φ = 30.00 degree
δ = 20.00 degree
α 87.709 degree
β 0.00 degree
0

External stablity analysis (Static)

Length of Strap = 6.0 m
For reinforced soil:
Ka1 = (1-sinØ1)/(1+sinØ1)
0.333
Wall batter θ = 2.291 deg.

For retrained backfill soil:

Ka2 = (1-sinØ2)/(1+sinØ2)
0.333

Am = 0.23

ʎ = = 12.883088

α = 87.709
φ = 30.00
β = 0

KAE = 0.514 Considering Am>0

KAE 0.349 Considering Am=0

DKAE = 0.1654

Calculation of factored Horizontal load (Rh)

Type of Force Formula used P.F (ffs) Case A P.F (ffs) Case B P.F (ffs) Case C P.F (ffs) Seismic Units
P1- Earth pressure ½ x ka2 x γ2 x H2 x ffs 1.5 204.8 1.5 204.8 1.0 136.5 1.0 136.53 KN/m
P2- Earth pressure due ka2 x qL x H x ffs 1.5 76.80 1.5 76.80 0.0 0.00 0.50 25.60 KN/m
P3- Due to dead load ka2 x qd x H x ffs 1.5 42.94 1.5 42.94 1.0 28.63 1.00 28.63 KN/m
P4- Horizontal strip ffsx FL 1.5 0 1.5 0 1.0 0 0 0 KN/m
PIR 0.5 x am x g1 x H2 - - - - - - 1 93.63 KN/m
(50%)PAE 50% of (0.5 x KAE x g3 x H2) - - - - - - 1 33.88 KN/m
Rh-Total factored (P1+P2+P3+P4) for case 324.5 324.5 165.2 318.3 KN/m

Calculation of factored vertical loads (Rv)

116
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 6.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 6.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Calculation of factored vertical loads (Rv)
Type of Force Formula used P.F (ffs) Case A P.F (ffs) Case B P.F (ffs) Case C P.F (ffs) Seismic Units
V1-Self weight of γ1 x H x Lxffs 1.5 1152.0 1 768.0 1.0 768.0 1.0 768.0 KN/m
V2- Due to live load qL x L x ffs 1.5 216.00 0 0.00 0.0 0.00 0.5 72.00 KN/m
V3- Due to dead load qd x L x ffs 1.5 121 1 81 1.0 81 1 81 KN/m
V4- Due to strip load ffsx SL 1.5 37.5 1 25.0 1.0 25.0 0 0.0 KN/m
RV-Total factored V1+V2+V3+V4 1526.3 873.5 873.5 920.5 KN/m

Sliding along base

Formula used Case A Case B Case C Seismic Units
Sliding P1+P2+P3 Static And
324.5 324.5 165.2 318.3 KN/m
forces (P1+P2+P3+PIR +50 %
Resisting
force Rv* (tanØ'p/fms)+
881.2 504.3 504.3 531.5 KN/m
(Static)/ (c3*L/fms)
(Seismic)

Calculation of Disturbing moment (Md)

Moment Formula used Case A Case B Case C Units
Md1-Earth pressure P1 x H /3 436.9 436.9 291.3 KN-m
Md2- Live Load P2 x H /2 245.76 245.76 0.00 KN-m
Md3- Dead load P3 x H /2 137 137 92 KN-m
Md4- Horziontal strip P4 x H 0.0 0.0 0.0 KN-m
Md-Total factored Md1+Md2+Md3+Md4 820.1 820.1 382.9 KN-m

Calculation of overturning moment (Mo) Seismic

Moment Formula used Seismic Unit
MO1-Earth pressure P1 x H /3 291.27 KN-m
Mo2- Live Load P2 x H /2 81.92 KN-m
Mo3- Due to horizontal P3 x H /2 91.61 KN-m
Mo4- Due to horizontal PIRx H/2 299.6 KN-m
Mo5- Due to seismic 0.5x PAE x0.6x H 130.1 KN-m
Mo-Total factored Mo1+Mo2+Mo3+Mo4 894.55 KN-m

Calculation of Resistingt moment (M r )

Moment Formula used Case A Case B Case C Seismic Units
Mr1-Reinforced fill V1 x L /2 3456.0 2304.0 2304.0 2304.0 KN-m
Mr2- Live Load V2 x Lc /2 648.0 0.0 0.0 - KN-m
Mr3- Dead load V3 x Lc /2 362 242 242 241.56 KN-m
Mr4- Vertical strip load V4 x d 37.5 25.0 25.0 - KN-m
Mr-Total factored Mr1+Mr2+Mr3+Mr4 4503.8 2570.6 2570.6 2545.6 KN-m

Summary Table: -1
Case Rv Rh Mr Md Mo MRBP e,(m) Md/Rv L/6 ,(m)
A 1526.3 324.5 4503.8 820.1 682.7 - 0.496 0.54 1.00
B 873.5 324.5 2570.6 820.1 682.7 - 0.839 0.94 1.00
C 873.5 165.2 2570.6 382.9 291.3 - 0.391 0.44 1.00
Seismic 920.5 318.3 2545.6 - 894.5 2761.6 0.97 - 2.00 L/3

117
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 6.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 6.4 m
R0 MPL/RE/23/PW-1 19-Apr-23

Bearing pressure (qref) Mayerhoff (Base

distribution
length is Used)
Bearing pressure Formula used Case A Case B Case C Seismic Unit
qref Rv x/(L-2e) 304.8 202.1 167.4 226.9 KN/m2
qult cfNc+qNq+0.5(L-2e)g3Ng 1489.6 1336.2 1537.0 1276.6 KN/m2
qsafe qult./fms+gf*dm 1084.0 974.5 1117.8 931.9 KN/m2

Factor of saftey table

Permisibl
Bearing Overturni e e< L/6
Case failure ng Sliding Ecentricity ,e m FOS
A 3.56 5.49 2.72 0.496 1.000 2.01
B 4.82 3.1 1.55 0.839 1.000 1.19
C 6.68 6.7 3.05 0.391 1.000 2.56
Seismic 5.63 2.8 1.7 0.972 2.000 2.06
Wall External stablity status

Parameter Case A Case B Case C Seismic Req. F.O.S

Bearing
Safe Safe Safe Safe 1.4
General Shearfailure
Overturning Safe Safe Safe Safe 1.2
Sliding Safe Safe Safe Safe 1.2
Ecentricity Safe Safe Safe Safe 1

118
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 6.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 6.4 m
R0 MPL/RE/23/PW-1 19-Apr-23

Internal stability analysis (Static)

A) Check for Rupture of reinforcement Q = 0.29

Case A
Elevation Vertical
Length of Strap Elevation
Strap from spacing
Strap ,L spacing from Top, Rhj Rvj Mdj Mrj Mo
layers base, hi of Strap,
(m) ,m hj ,m
,m Svj ,m
1 6.0 0.4 0.4 6.0 0.800 292.3 1416.8 696.8 4250.3 576.0 0.0
2 5.5 0.8 1.2 5.2 0.800 232.5 1166.7 487.3 3208.5 396.6 0.0
3 5.5 0.8 2.0 4.4 0.800 179.1 1034.7 323.1 2845.5 258.1 0.0
4 5.8 0.8 2.8 3.6 0.800 132.2 952.0 199.0 2760.7 155.5 0.0
5 6.0 0.8 3.6 2.8 0.800 91.6 840.8 109.9 2522.3 83.6 0.0
6 6.8 0.8 4.4 2.0 0.800 57.4 789.7 50.8 2684.9 37.3 0.0
7 7.5 0.8 5.2 1.2 0.800 29.7 691.0 16.4 2591.2 11.5 0.0
8 9.8 0.8 6.0 0.4 0.800 8.3 667.7 1.6 3271.6 1.1 0.0
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

119
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 6.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 6.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.5 1/6
0.49 5.00 282.43 75.31 2.00 0.0 0.0 77.31 7.38 0.08 Safe Safe
0.42 4.60 250.12 66.70 2.17 0.0 0.0 68.87 8.09 0.08 Safe Safe
0.31 4.20 212.23 56.59 2.38 0.0 0.0 58.97 11.02 0.06 Safe Safe
0.21 3.80 176.88 47.17 2.63 0.0 0.0 49.80 17.75 0.04 Safe Safe
0.13 3.40 146.52 39.07 2.94 0.0 0.0 42.01 30.16 0.02 Safe Safe
0.06 3.00 118.37 31.56 3.33 0.0 0.0 34.90 71.92 0.01 Safe Safe
0.02 2.60 92.72 24.72 3.85 0.0 0.0 28.57 224.93 0.00 Safe Safe
0.00 2.20 68.16 18.18 4.55 0.0 0.0 22.72 3067.13 0.00 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

120
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 6.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 6.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Case B
Elevation Vertical
Length of Strap Elevation
Strap from spacing
Strap ,L spacing from Top, Rhj Rvj Mdj Mrj Mo
layers base, hi of Strap,
(m) ,m hj ,m
,m Svj ,m
1 6 0.4 0.4 6 0.8 292.26 800.52 696.78 2401.6 576.00
2 5.5 0.8 1.2 5.2 0.8 232.49 645.81 487.31 1776.0 396.59
3 5.5 0.8 2 4.4 0.8 179.12 557.81 323.09 1534.0 258.13
4 5.8 0.8 2.8 3.6 0.8 132.16 495.44 199.00 1436.8 155.52
5 6 0.8 3.6 2.8 0.8 91.59 416.52 109.93 1249.6 83.63
6 6.8 0.8 4.4 2 0.8 57.42 363.26 50.75 1235.1 37.33
7 7.5 0.8 5.2 1.2 0.8 29.65 280.65 16.35 1052.4 11.52
8 9.8 0.8 6 0.4 0.8 8.28 209.92 1.60 1028.6 1.07
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

121
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 6.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 6.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.35 1/6
0.87 5.00 187.95 50.12 1.33 0.0 0.0 51.45 4.169 0.145 Safe Safe
0.75 4.60 161.82 43.15 1.45 0.0 0.0 44.60 4.478 0.137 Safe Safe
0.58 4.20 128.48 34.26 1.59 0.0 0.0 35.85 5.943 0.105 Safe Safe
0.40 3.80 99.15 26.44 1.75 0.0 0.0 28.20 9.238 0.069 Safe Safe
0.26 3.40 76.12 20.30 1.96 0.0 0.0 22.26 14.942 0.044 Safe Safe
0.14 3.00 55.71 14.86 2.22 0.0 0.0 17.08 33.082 0.021 Safe Safe
0.06 2.60 38.01 10.14 2.56 0.0 0.0 12.70 91.357 0.008 Safe Safe
0.01 2.20 21.45 5.72 3.03 0.0 0.0 8.75 964.302 0.001 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

122
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 6.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 6.4 m
R0 MPL/RE/23/PW-1 19-Apr-23

Case C
Elevation Vertical
Length of Strap from Elevation spacing
Strap Strap ,L spacing base, hi from Top, of Strap,
layers (m) ,m ,m hj ,m Svj ,m Rhj Rvj Mdj Mrj Mo
1 6 0.4 0.4 6 0.8 146.84 800.52 320.52 2401.56 240.00
2 5.5 0.8 1.2 5.2 0.8 113.39 645.81 216.71 1775.98 156.23
3 5.5 0.8 2 4.4 0.8 84.22 557.81 137.95 1533.98 94.65
4 5.8 0.8 2.8 3.6 0.8 59.30 495.44 80.83 1436.76 51.84
5 6 0.8 3.6 2.8 0.8 38.66 416.52 41.93 1249.56 24.39
6 6.8 0.8 4.4 2 0.8 22.28 363.26 17.84 1235.07 8.89
7 7.5 0.8 5.2 1.2 0.8 10.17 280.65 5.14 1052.44 1.92
8 9.8 0.8 6 0.4 0.8 2.32 209.92 0.43 1028.59 0.07
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

123
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 6.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 6.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.35 1/6
0.40 5.00 153.97 41.06 1.33 0.0 0.0 42.39 10.01 0.07 Safe Safe
0.34 4.60 133.74 35.66 1.45 0.0 0.0 37.11 11.37 0.06 Safe Safe
0.25 4.20 111.44 29.72 1.59 0.0 0.0 31.31 16.21 0.04 Safe Safe
0.16 3.80 90.51 24.14 1.75 0.0 0.0 25.89 27.72 0.03 Safe Safe
0.10 3.40 71.83 19.15 1.96 0.0 0.0 21.12 51.23 0.02 Safe Safe
0.05 3.00 54.20 14.45 2.22 0.0 0.0 16.68 138.95 0.01 Safe Safe
0.02 2.60 37.60 10.03 2.56 0.0 0.0 12.59 548.14 0.00 Safe Safe
0.00 2.20 21.43 5.71 3.03 0.0 0.0 8.74 14464.52 0.00 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

124
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 6.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 6.4 m
R0 MPL/RE/23/PW-1 19-Apr-23

Seismic Analysis
Elevation Vertical
Length of Strap from Elevation spacing
Strap Strap ,L spacing base, hi from Top, of Strap,
layers (m) ,m ,m hj ,m Svj ,m Rhj Rvj Mo Mrj PI=Wa*Am
1 6 0.4 0.4 6 0.8 235.94 872.52 693.82 2401.56 47.51
2 5.5 0.8 1.2 5.2 0.8 180.32 711.81 461.63 1775.98 35.69
3 5.5 0.8 2 4.4 0.8 132.13 623.81 287.92 1533.98 25.55
4 5.8 0.8 2.8 3.6 0.8 91.38 565.04 164.22 1436.76 17.10
5 6 0.8 3.6 2.8 0.8 58.06 488.52 82.09 1249.56 10.35
6 6.8 0.8 4.4 2 0.8 32.18 444.86 33.08 1235.07 5.28
7 7.5 0.8 5.2 1.2 0.8 13.73 370.65 8.74 1052.44 1.90
8 9.8 0.8 6 0.4 0.8 2.72 327.52 0.62 1028.59 0.21
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

125
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 6.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 6.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Rsvj Check for Check for
Mr/Mo
Ecentricit (for overturni eccentrici
Dj svj Tpj Tmd Tj (Overturi e/L
y, ej Internal ngMr/Mo tye / L ≤
ning)
Sliding) ≥ 1.125 1/3
1.04 5.00 222.89 59.44 7.19 66.6 428.2 3.46 0.17 Safe Safe
0.90 4.60 192.75 51.40 4.50 55.9 349.3 3.85 0.16 Safe Safe
0.75 4.20 156.15 41.64 2.91 44.6 306.1 5.33 0.14 Safe Safe
0.65 3.80 125.44 33.45 1.88 35.3 277.3 8.75 0.11 Safe Safe
0.61 3.40 102.21 27.26 1.06 28.3 239.7 15.22 0.10 Safe Safe
0.70 3.00 82.32 21.95 0.59 22.5 218.3 37.33 0.10 Safe Safe
0.93 2.60 65.81 17.55 0.22 17.8 181.9 120.39 0.12 Safe Safe
1.76 2.20 52.17 13.91 0.04 13.9 160.7 1661.08 0.18 Safe Safe
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

126
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 6.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 6.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Rupture check for Reinforcement FOS REQ = 1.000

MAX Tj
Strap CASE Width of Force per Width of FOS FOS
hj T avialable
Type A,B,C & Panel strip Strip Status Status
SEISMIC
6.00 85 KN 41.96 77.31 2.00 38.66 0.09 1.085 Safe
5.20 75 KN 36.68 68.87 2.00 34.44 0.09 1.065 Safe
4.40 75 KN 36.68 58.97 2.00 29.49 0.09 1.244 Safe
3.60 60 KN 29.34 49.80 2.00 24.90 0.09 1.178 Safe
2.80 50 KN 24.46 42.01 2.00 21.01 0.09 1.164 Safe
2.00 40 KN 19.56 34.90 2.00 17.45 0.09 1.121 Safe
1.20 30 KN 14.67 28.57 2.00 14.29 0.09 1.027 Safe
0.40 30 KN 14.67 22.72 2.00 11.36 0.09 1.291 Safe
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -

127
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 6.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 6.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check For Internal Sliding
Strap
length Load case A Load case B Seismic Fos>=1.3 Fos>=1.3 Fos>=1.125
Rhj Rvj Rsvj FOS Rhj Rvj Rsvj FOS FOS Case A Case B Seismic
6.0 292.3 1416.8 695.3 2.379 292.3 800.5 392.9 1.344 1.815 Safe Safe Safe
5.5 232.5 1166.7 572.6 2.463 232.5 645.8 316.9 1.363 1.937 Safe Safe Safe
5.5 179.1 1034.7 507.8 2.835 179.1 557.8 273.7 1.528 2.317 Safe Safe Safe
5.8 132.2 952.0 467.2 3.535 132.2 495.4 243.1 1.840 3.034 Safe Safe Safe
6.0 91.6 840.8 412.6 4.505 91.6 416.5 204.4 2.232 4.129 Safe Safe Safe
6.8 57.4 789.7 387.5 6.749 57.4 363.3 178.3 3.105 6.784 Safe Safe Safe
7.5 29.7 691.0 339.1 11.436 29.7 280.7 137.7 4.645 13.246 Safe Safe Safe
9.8 8.3 667.7 327.7 39.553 8.3 209.9 103.0 12.436 59.120 Safe Safe Safe
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -

128
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 6.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 6.4 m
R0 MPL/RE/23/PW-1 19-Apr-23

Pull out or Adherence of Reinforcement check

(Pj) = Perimeter of jth layer total horizontal width of Strap of top and bottom faces = 0.180 m

Elevation Vertical Cofficient

Elevation Effective
from spacing Strap of
from Top, length of Case A Tj Puj FOS ≥ 1
base, hi of Strap, length Friction.
hj ,m Strap
,m Svj ,m m
6 0.4 0.8 6.0 5.77 77.31 0.491 156.90 2.029
5.2 1.2 0.8 5.5 4.81 68.87 0.491 115.06 1.671
4.4 2 0.8 5.5 4.35 58.97 0.491 89.84 1.523
3.6 2.8 0.8 5.8 4.18 49.80 0.491 72.84 1.463
2.8 3.6 0.8 6.0 3.92 42.01 0.491 55.49 1.321
2 4.4 0.8 6.8 4.26 34.90 0.491 46.39 1.329
1.2 5.2 0.8 7.5 4.50 28.57 0.491 34.31 1.201
0.4 6 0.8 9.8 6.34 22.72 0.491 27.67 1.218
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -

129
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 6.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 6.4 m
R0 MPL/RE/23/PW-1 19-Apr-23

Pr
Seismic Pullout FoS nos of
Case B Tj Puj FOS Case C Tj Puj FOS Status
Tj Resistanc Pullout Strip/m
e
51.45 135.98 2.643 51.45 135.98 2.643 66.6 92.47 1.388 2 Safe
22.30 99.72 4.472 44.60 99.72 2.236 55.9 67.81 1.213 2 Safe
17.92 77.86 4.344 35.85 77.86 2.172 44.6 52.94 1.188 2 Safe
14.10 63.13 4.478 28.20 63.13 2.239 35.3 42.93 1.215 2 Safe
11.13 48.10 4.322 22.26 48.10 2.161 28.3 32.70 1.155 2 Safe
8.54 40.20 4.708 17.08 40.20 2.354 22.5 27.34 1.213 2 Safe
6.35 29.73 4.683 12.70 29.73 2.341 17.8 20.22 1.138 2 Safe
4.38 23.98 5.480 8.75 23.98 2.740 13.9 16.30 1.169 2 Safe
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

130
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 6.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 6.4 m
R0 MPL/RE/23/PW-1 19-Apr-23

From Bottom Layer DESIGN HT=

6.400 m

Elevation
Strap Strap No. of
Sr No from
Grade Length Connector
bottom

1 85 KN 6.0 0.4 2
2 75 KN 5.5 1.2 2
3 75 KN 5.5 2.0 2
4 60 KN 5.8 2.8 2
5 50 KN 6.0 3.6 2
6 40 KN 6.8 4.4 2
7 30 KN 7.5 5.2 2
8 30 KN 9.8 6.0 2
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -

131
8. CALCULATION FOR HEIGHT 7.2
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 7.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 7.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Wall Geometry
Height of facing H = 6.200 m
Soil Height (Earth crust) = 0.61 m
Embedment depth Dm = 1.00 m
Total height of the wall = 7.81 m
Design Height (H) = 7.200 m
Mechanical height (Hm) = 7.81 m
Minimum length of Reinforcement = 5.04 m (0.7*H)
Trail Length of Strap (L) = 5.04 m (Minimum Required)
Length of Strap (L) = 6.6 m
0

0
Dead load surcharge 2nd Tier + qd (Earth Crust) = 13.42 kPa
0 kPa
φ = 30.00 degree
δ = 20.00 degree
α 87.709 degree
β 0.00 degree
0

External stablity analysis (Static)

Length of Strap = 6.6 m
For reinforced soil:
Ka1 = (1-sinØ1)/(1+sinØ1)
0.333
Wall batter θ = 2.291 deg.

For retrained backfill soil:

Ka2 = (1-sinØ2)/(1+sinØ2)
0.333

Am = 0.23

ʎ = = 12.883088

α = 87.709
φ = 30.00
β = 0

KAE = 0.514 Considering Am>0

KAE 0.349 Considering Am=0

DKAE = 0.1654

Calculation of factored Horizontal load (Rh)

Type of Force Formula used P.F (ffs) Case A P.F (ffs) Case B P.F (ffs) Case C P.F (ffs) Seismic Units
P1- Earth pressure ½ x ka2 x γ2 x H2 x ffs 1.5 259.2 1.5 259.2 1.0 172.8 1.0 172.80 KN/m
P2- Earth pressure due ka2 x qL x H x ffs 1.5 86.40 1.5 86.40 0.0 0.00 0.50 28.80 KN/m
P3- Due to dead load ka2 x qd x H x ffs 1.5 48.31 1.5 48.31 1.0 32.21 1.00 32.21 KN/m
P4- Horizontal strip ffsx FL 1.5 0 1.5 0 1.0 0 0 0 KN/m
PIR 0.5 x am x g1 x H2 - - - - - - 1 118.51 KN/m
(50%)PAE 50% of (0.5 x KAE x g3 x H2) - - - - - - 1 42.88 KN/m
Rh-Total factored (P1+P2+P3+P4) for case 393.9 393.9 205.0 395.2 KN/m

Calculation of factored vertical loads (Rv)

133
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 7.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 7.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Calculation of factored vertical loads (Rv)
Type of Force Formula used P.F (ffs) Case A P.F (ffs) Case B P.F (ffs) Case C P.F (ffs) Seismic Units
V1-Self weight of γ1 x H x Lxffs 1.5 1425.6 1 950.4 1.0 950.4 1.0 950.4 KN/m
V2- Due to live load qL x L x ffs 1.5 237.60 0 0.00 0.0 0.00 0.5 79.20 KN/m
V3- Due to dead load qd x L x ffs 1.5 133 1 89 1.0 89 1 89 KN/m
V4- Due to strip load ffsx SL 1.5 37.5 1 25.0 1.0 25.0 0 0.0 KN/m
RV-Total factored V1+V2+V3+V4 1833.6 1064.0 1064.0 1118.2 KN/m

Sliding along base

Formula used Case A Case B Case C Seismic Units
Sliding P1+P2+P3 Static And
393.9 393.9 205.0 395.2 KN/m
forces (P1+P2+P3+PIR +50 %
Resisting
force Rv* (tanØ'p/fms)+
1058.6 614.3 614.3 645.6 KN/m
(Static)/ (c3*L/fms)
(Seismic)

Calculation of Disturbing moment (Md)

Moment Formula used Case A Case B Case C Units
Md1-Earth pressure P1 x H /3 622.1 622.1 414.7 KN-m
Md2- Live Load P2 x H /2 311.04 311.04 0.00 KN-m
Md3- Dead load P3 x H /2 174 174 116 KN-m
Md4- Horziontal strip P4 x H 0.0 0.0 0.0 KN-m
Md-Total factored Md1+Md2+Md3+Md4 1107.0 1107.0 530.7 KN-m

Calculation of overturning moment (Mo) Seismic

Moment Formula used Seismic Unit
MO1-Earth pressure P1 x H /3 414.72 KN-m
Mo2- Live Load P2 x H /2 103.68 KN-m
Mo3- Due to horizontal P3 x H /2 115.95 KN-m
Mo4- Due to horizontal PIRx H/2 426.6 KN-m
Mo5- Due to seismic 0.5x PAE x0.6x H 185.3 KN-m
Mo-Total factored Mo1+Mo2+Mo3+Mo4 1246.23 KN-m

Calculation of Resistingt moment (M r )

Moment Formula used Case A Case B Case C Seismic Units
Mr1-Reinforced fill V1 x L /2 4704.5 3136.3 3136.3 3136.3 KN-m
Mr2- Live Load V2 x Lc /2 784.1 0.0 0.0 - KN-m
Mr3- Dead load V3 x Lc /2 438 292 292 292.2876 KN-m
Mr4- Vertical strip load V4 x d 37.5 25.0 25.0 - KN-m
Mr-Total factored Mr1+Mr2+Mr3+Mr4 5964.5 3453.6 3453.6 3428.6 KN-m

Summary Table: -1
Case Rv Rh Mr Md Mo MRBP e,(m) Md/Rv L/6 ,(m)
A 1833.6 393.9 5964.5 1107.0 933.1 - 0.556 0.60 1.10
B 1064.0 393.9 3453.6 1107.0 933.1 - 0.931 1.04 1.10
C 1064.0 205.0 3453.6 530.7 414.7 - 0.444 0.50 1.10
Seismic 1118.2 395.2 3428.6 - 1246.2 3690.0 1.11 - 2.20 L/3

134
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 7.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 7.2 m
R0 MPL/RE/23/PW-1 19-Apr-23

Bearing pressure (qref) Mayerhoff (Base

distribution
length is Used)
Bearing pressure Formula used Case A Case B Case C Seismic Unit
qref Rv x/(L-2e) 334.1 224.6 186.3 255.8 KN/m2
qult cfNc+qNq+0.5(L-2e)g3Ng 1597.3 1429.3 1647.6 1347.1 KN/m2
qsafe qult./fms+gf*dm 1161.0 1040.9 1196.8 982.2 KN/m2

Factor of saftey table

Permisibl
Bearing Overturni e e< L/6
Case failure ng Sliding Ecentricity ,e m FOS
A 3.47 5.39 2.69 0.556 1.100 1.98
B 4.64 3.1 1.56 0.931 1.100 1.18
C 6.43 6.5 3.00 0.444 1.100 2.48
Seismic 5.27 2.8 1.6 1.115 2.200 1.97
Wall External stablity status

Parameter Case A Case B Case C Seismic Req. F.O.S

Bearing
Safe Safe Safe Safe 1.4
General Shearfailure
Overturning Safe Safe Safe Safe 1.2
Sliding Safe Safe Safe Safe 1.2
Ecentricity Safe Safe Safe Safe 1

135
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 7.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 7.2 m
R0 MPL/RE/23/PW-1 19-Apr-23

Internal stability analysis (Static)

A) Check for Rupture of reinforcement Q = 0.29

Case A
Elevation Vertical
Length of Strap Elevation
Strap from spacing
Strap ,L spacing from Top, Rhj Rvj Mdj Mrj Mo
layers base, hi of Strap,
(m) ,m hj ,m
,m Svj ,m
1 6.6 0.4 0.4 6.8 0.800 358.4 1716.9 956.6 5665.6 801.5 0.0
2 6.1 0.8 1.2 6.0 0.800 292.3 1440.4 696.8 4393.2 576.0 0.0
3 5.6 0.8 2.0 5.2 0.800 232.5 1187.9 487.3 3326.2 396.6 0.0
4 6.1 0.8 2.8 4.4 0.800 179.1 1147.6 323.1 3500.2 258.1 0.0
5 6.1 0.8 3.6 3.6 0.800 132.2 1001.2 199.0 3053.6 155.5 0.0
6 6.6 0.8 4.4 2.8 0.800 91.6 924.9 109.9 3052.0 83.6 0.0
7 7.1 0.8 5.2 2.0 0.800 57.4 824.5 50.8 2927.1 37.3 0.0
8 8.1 0.8 6.0 1.2 0.800 29.7 746.3 16.4 3022.3 11.5 0.0
9 10.1 0.8 6.8 0.4 0.800 8.3 688.1 1.6 3475.0 1.1 0.0
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

136
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 7.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 7.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.5 1/6
0.56 5.40 312.98 83.46 1.85 0.0 0.0 85.31 7.07 0.08 Safe Safe
0.48 5.00 280.64 74.84 2.00 0.0 0.0 76.84 7.63 0.08 Safe Safe
0.41 4.60 248.54 66.28 2.17 0.0 0.0 68.45 8.39 0.07 Safe Safe
0.28 4.20 207.26 55.27 2.38 0.0 0.0 57.65 13.56 0.05 Safe Safe
0.20 3.80 175.57 46.82 2.63 0.0 0.0 49.45 19.64 0.03 Safe Safe
0.12 3.40 145.37 38.76 2.94 0.0 0.0 41.71 36.50 0.02 Safe Safe
0.06 3.00 118.18 31.51 3.33 0.0 0.0 34.85 78.40 0.01 Safe Safe
0.02 2.60 92.63 24.70 3.85 0.0 0.0 28.55 262.35 0.00 Safe Safe
0.00 2.20 68.16 18.18 4.55 0.0 0.0 22.72 3257.78 0.00 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

137
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 7.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 7.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Case B
Elevation Vertical
Length of Strap Elevation
Strap from spacing
Strap ,L spacing from Top, Rhj Rvj Mdj Mrj Mo
layers base, hi of Strap,
(m) ,m hj ,m
,m Svj ,m
1 6.6 0.4 0.4 6.8 0.8 358.43 986.17 956.63 3254.4 801.49
2 6.1 0.8 1.2 6 0.8 292.26 813.86 696.78 2482.3 576.00
3 5.6 0.8 2 5.2 0.8 232.49 657.55 487.31 1841.1 396.59
4 6.1 0.8 2.8 4.4 0.8 179.12 618.66 323.09 1886.9 258.13
5 6.1 0.8 3.6 3.6 0.8 132.16 521.06 199.00 1589.2 155.52
6 6.6 0.8 4.4 2.8 0.8 91.59 458.17 109.93 1512.0 83.63
7 7.1 0.8 5.2 2 0.8 57.42 379.28 50.75 1346.5 37.33
8 8.1 0.8 6 1.2 0.8 29.65 303.10 16.35 1227.6 11.52
9 10.1 0.8 6.8 0.4 0.8 8.28 216.34 1.60 1092.5 1.07
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

138
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 7.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 7.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.35 1/6
0.97 5.40 211.63 56.43 1.23 0.0 0.0 57.67 4.060 0.147 Safe Safe
0.86 5.00 185.49 49.46 1.33 0.0 0.0 50.80 4.310 0.140 Safe Safe
0.74 4.60 159.68 42.58 1.45 0.0 0.0 44.03 4.642 0.132 Safe Safe
0.52 4.20 122.37 32.63 1.59 0.0 0.0 34.22 7.310 0.086 Safe Safe
0.38 3.80 97.65 26.04 1.75 0.0 0.0 27.79 10.219 0.063 Safe Safe
0.24 3.40 74.86 19.96 1.96 0.0 0.0 21.92 18.080 0.036 Safe Safe
0.13 3.00 55.51 14.80 2.22 0.0 0.0 17.03 36.066 0.019 Safe Safe
0.05 2.60 37.93 10.11 2.56 0.0 0.0 12.68 106.559 0.007 Safe Safe
0.01 2.20 21.45 5.72 3.03 0.0 0.0 8.75 1024.244 0.001 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

139
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 7.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 7.2 m
R0 MPL/RE/23/PW-1 19-Apr-23

Case C
Elevation Vertical
Length of Strap from Elevation spacing
Strap Strap ,L spacing base, hi from Top, of Strap,
layers (m) ,m ,m hj ,m Svj ,m Rhj Rvj Mdj Mrj Mo
1 6.6 0.4 0.4 6.8 0.8 184.55 986.17 452.79 3254.37 349.37
2 6.1 0.8 1.2 6 0.8 146.84 813.86 320.52 2482.28 240.00
3 5.6 0.8 2 5.2 0.8 113.39 657.55 216.71 1841.15 156.23
4 6.1 0.8 2.8 4.4 0.8 84.22 618.66 137.95 1886.92 94.65
5 6.1 0.8 3.6 3.6 0.8 59.30 521.06 80.83 1589.24 51.84
6 6.6 0.8 4.4 2.8 0.8 38.66 458.17 41.93 1511.97 24.39
7 7.1 0.8 5.2 2 0.8 22.28 379.28 17.84 1346.45 8.89
8 8.1 0.8 6 1.2 0.8 10.17 303.10 5.14 1227.56 1.92
9 10.1 0.8 6.8 0.4 0.8 2.32 216.34 0.43 1092.53 0.07
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

140
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 7.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 7.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.35 1/6
0.46 5.40 173.57 46.29 1.23 0.0 0.0 47.52 9.31 0.07 Safe Safe
0.39 5.00 153.20 40.85 1.33 0.0 0.0 42.19 10.34 0.06 Safe Safe
0.33 4.60 133.08 35.49 1.45 0.0 0.0 36.94 11.78 0.06 Safe Safe
0.22 4.20 109.42 29.18 1.59 0.0 0.0 30.77 19.94 0.04 Safe Safe
0.16 3.80 90.00 24.00 1.75 0.0 0.0 25.75 30.66 0.03 Safe Safe
0.09 3.40 71.40 19.04 1.96 0.0 0.0 21.00 61.99 0.01 Safe Safe
0.05 3.00 54.14 14.44 2.22 0.0 0.0 16.66 151.48 0.01 Safe Safe
0.02 2.60 37.58 10.02 2.56 0.0 0.0 12.58 639.36 0.00 Safe Safe
0.00 2.20 21.43 5.71 3.03 0.0 0.0 8.74 15363.66 0.00 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

141
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 7.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 7.2 m
R0 MPL/RE/23/PW-1 19-Apr-23

Seismic Analysis
Elevation Vertical
Length of Strap from Elevation spacing
Strap Strap ,L spacing base, hi from Top, of Strap,
layers (m) ,m ,m hj ,m Svj ,m Rhj Rvj Mo Mrj PI=Wa*Am
1 6.6 0.4 0.4 6.8 0.8 299.00 1065.37 995.99 3254.37 61.03
2 6.1 0.8 1.2 6 0.8 235.94 887.06 696.22 2482.28 47.51
3 5.6 0.8 2 5.2 0.8 180.32 724.75 463.44 1841.15 35.69
4 6.1 0.8 2.8 4.4 0.8 132.13 691.86 289.21 1886.92 25.55
5 6.1 0.8 3.6 3.6 0.8 91.38 594.26 165.09 1589.24 17.10
6 6.6 0.8 4.4 2.8 0.8 58.06 537.37 82.62 1511.97 10.35
7 7.1 0.8 5.2 2 0.8 32.18 464.48 33.35 1346.45 5.28
8 8.1 0.8 6 1.2 0.8 13.73 400.30 8.84 1227.56 1.90
9 10.1 0.8 6.8 0.4 0.8 2.72 337.54 0.63 1092.53 0.21
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

142
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 7.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 7.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Rsvj Check for Check for
Mr/Mo
Ecentricit (for overturni eccentrici
Dj svj Tpj Tmd Tj (Overturi e/L
y, ej Internal ngMr/Mo tye / L ≤
ning)
Sliding) ≥ 1.125 1/3
1.18 5.40 251.29 67.01 8.90 75.9 522.8 3.27 0.18 Safe Safe
1.04 5.00 220.28 58.74 5.88 64.6 435.3 3.57 0.17 Safe Safe
0.90 4.60 190.63 50.83 3.63 54.5 355.7 3.97 0.16 Safe Safe
0.74 4.20 149.80 39.95 2.62 42.6 339.5 6.52 0.12 Safe Safe
0.65 3.80 123.99 33.06 1.57 34.6 291.6 9.63 0.11 Safe Safe
0.64 3.40 101.01 26.94 0.96 27.9 263.7 18.30 0.10 Safe Safe
0.72 3.00 82.15 21.91 0.50 22.4 227.9 40.37 0.10 Safe Safe
1.01 2.60 65.74 17.53 0.20 17.7 196.4 138.90 0.12 Safe Safe
1.82 2.20 52.17 13.91 0.03 13.9 165.6 1734.46 0.18 Safe Safe
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

143
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 7.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 7.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Rupture check for Reinforcement FOS REQ = 1.000

MAX Tj
Strap CASE Width of Force per Width of FOS FOS
hj T avialable
Type A,B,C & Panel strip Strip Status Status
SEISMIC
6.80 100 KN 49.83 85.31 2.00 42.66 0.09 1.168 Safe
6.00 85 KN 41.96 76.84 2.00 38.42 0.09 1.092 Safe
5.20 75 KN 36.68 68.45 2.00 34.23 0.09 1.072 Safe
4.40 60 KN 29.34 57.65 2.00 28.83 0.09 1.018 Safe
3.60 60 KN 29.34 49.45 2.00 24.73 0.09 1.187 Safe
2.80 50 KN 24.46 41.71 2.00 20.85 0.09 1.173 Safe
2.00 40 KN 19.56 34.85 2.00 17.42 0.09 1.122 Safe
1.20 30 KN 14.67 28.55 2.00 14.27 0.09 1.028 Safe
0.40 30 KN 14.67 22.72 2.00 11.36 0.09 1.291 Safe
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -

144
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 7.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 7.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check For Internal Sliding
Strap
length Load case A Load case B Seismic Fos>=1.3 Fos>=1.3 Fos>=1.125
Rhj Rvj Rsvj FOS Rhj Rvj Rsvj FOS FOS Case A Case B Seismic
6.6 358.4 1716.9 842.5 2.351 358.4 986.2 484.0 1.350 1.749 Safe Safe Safe
6.1 292.3 1440.4 706.9 2.419 292.3 813.9 399.4 1.367 1.845 Safe Safe Safe
5.6 232.5 1187.9 583.0 2.507 232.5 657.6 322.7 1.388 1.972 Safe Safe Safe
6.1 179.1 1147.6 563.2 3.144 179.1 618.7 303.6 1.695 2.570 Safe Safe Safe
6.1 132.2 1001.2 491.3 3.718 132.2 521.1 255.7 1.935 3.191 Safe Safe Safe
6.6 91.6 924.9 453.9 4.956 91.6 458.2 224.8 2.455 4.542 Safe Safe Safe
7.1 57.4 824.5 404.6 7.047 57.4 379.3 186.1 3.242 7.083 Safe Safe Safe
8.1 29.7 746.3 366.2 12.351 29.7 303.1 148.7 5.016 14.306 Safe Safe Safe
10.1 8.3 688.1 337.7 40.764 8.3 216.3 106.2 12.816 60.929 Safe Safe Safe
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -

145
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 7.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 7.2 m
R0 MPL/RE/23/PW-1 19-Apr-23

Pull out or Adherence of Reinforcement check

(Pj) = Perimeter of jth layer total horizontal width of Strap of top and bottom faces = 0.180 m

Elevation Vertical Cofficient

Elevation Effective
from spacing Strap of
from Top, length of Case A Tj Puj FOS ≥ 1
base, hi of Strap, length Friction.
hj ,m Strap
,m Svj ,m m
6.8 0.4 0.8 6.6 6.37 85.31 0.491 194.00 2.274
6 1.2 0.8 6.1 5.41 76.84 0.491 147.06 1.914
5.2 2 0.8 5.6 4.45 68.45 0.491 106.40 1.554
4.4 2.8 0.8 6.1 4.48 57.65 0.491 92.69 1.608
3.6 3.6 0.8 6.1 4.02 49.45 0.491 70.03 1.416
2.8 4.4 0.8 6.6 4.06 41.71 0.491 57.45 1.377
2 5.2 0.8 7.1 4.10 34.85 0.491 44.62 1.281
1.2 6 0.8 8.1 4.64 28.55 0.491 35.36 1.239
0.4 6.8 0.8 10.1 6.17 22.72 0.491 26.96 1.186
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -

146
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 7.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 7.2 m
R0 MPL/RE/23/PW-1 19-Apr-23

Pr
Seismic Pullout FoS nos of
Case B Tj Puj FOS Case C Tj Puj FOS Status
Tj Resistanc Pullout Strip/m
e
57.67 168.13 2.915 57.67 168.13 2.915 75.9 114.33 1.506 2 Safe
25.40 127.45 5.018 50.80 127.45 2.509 64.6 86.67 1.341 2 Safe
22.02 92.22 4.189 44.03 92.22 2.094 54.5 62.71 1.151 2 Safe
17.11 80.33 4.695 34.22 80.33 2.348 42.6 54.63 1.283 2 Safe
13.90 60.69 4.367 27.79 60.69 2.184 34.6 41.27 1.191 2 Safe
10.96 49.79 4.542 21.92 49.79 2.271 27.9 33.86 1.214 2 Safe
8.51 38.67 4.543 17.03 38.67 2.271 22.4 26.30 1.174 2 Safe
6.34 30.65 4.835 12.68 30.65 2.417 17.7 20.84 1.175 2 Safe
4.38 23.36 5.340 8.75 23.36 2.670 13.9 15.89 1.139 2 Safe
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

147
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 7.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 7.2 m
R0 MPL/RE/23/PW-1 19-Apr-23

From Bottom Layer DESIGN HT=

7.200 m

Elevation
Strap Strap No. of
Sr No from
Grade Length Connector
bottom

1 100 KN 6.6 0.4 2

2 85 KN 6.1 1.2 2
3 75 KN 5.6 2.0 2
4 60 KN 6.1 2.8 2
5 60 KN 6.1 3.6 2
6 50 KN 6.6 4.4 2
7 40 KN 7.1 5.2 2
8 30 KN 8.1 6.0 2
9 30 KN 10.1 6.8 2
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -

148
9. CALCULATION FOR HEIGHT 8
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Wall Geometry
Height of facing H = 7.000 m
Soil Height (Earth crust) = 0.61 m
Embedment depth Dm = 1.00 m
Total height of the wall = 8.61 m
Design Height (H) = 8.000 m
Mechanical height (Hm) = 8.61 m
Minimum length of Reinforcement = 5.60 m (0.7*H)
Trail Length of Strap (L) = 5.60 m (Minimum Required)
Length of Strap (L) = 7.1 m
0

0
Dead load surcharge 2nd Tier + qd (Earth Crust) = 13.42 kPa
0 kPa
φ = 30.00 degree
δ = 20.00 degree
α 87.709 degree
β 0.00 degree
0

External stablity analysis (Static)

Length of Strap = 7.1 m
For reinforced soil:
Ka1 = (1-sinØ1)/(1+sinØ1)
0.333
Wall batter θ = 2.291 deg.

For retrained backfill soil:

Ka2 = (1-sinØ2)/(1+sinØ2)
0.333

Am = 0.23

ʎ = = 12.883088

α = 87.709
φ = 30.00
β = 0

KAE = 0.514 Considering Am>0

KAE 0.349 Considering Am=0

DKAE = 0.1654

Calculation of factored Horizontal load (Rh)

Type of Force Formula used P.F (ffs) Case A P.F (ffs) Case B P.F (ffs) Case C P.F (ffs) Seismic Units
P1- Earth pressure ½ x ka2 x γ2 x H2 x ffs 1.5 320.0 1.5 320.0 1.0 213.3 1.0 213.33 KN/m
P2- Earth pressure due ka2 x qL x H x ffs 1.5 96.00 1.5 96.00 0.0 0.00 0.50 32.00 KN/m
P3- Due to dead load ka2 x qd x H x ffs 1.5 53.68 1.5 53.68 1.0 35.79 1.00 35.79 KN/m
P4- Horizontal strip ffsx FL 1.5 0 1.5 0 1.0 0 0 0 KN/m
PIR 0.5 x am x g1 x H2 - - - - - - 1 146.30 KN/m
(50%)PAE 50% of (0.5 x KAE x g3 x H2) - - - - - - 1 52.94 KN/m
Rh-Total factored (P1+P2+P3+P4) for case 469.7 469.7 249.1 480.4 KN/m

Calculation of factored vertical loads (Rv)

150
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Calculation of factored vertical loads (Rv)
Type of Force Formula used P.F (ffs) Case A P.F (ffs) Case B P.F (ffs) Case C P.F (ffs) Seismic Units
V1-Self weight of γ1 x H x Lxffs 1.5 1704.0 1 1136.0 1.0 1136.0 1.0 1136.0 KN/m
V2- Due to live load qL x L x ffs 1.5 255.60 0 0.00 0.0 0.00 0.5 85.20 KN/m
V3- Due to dead load qd x L x ffs 1.5 143 1 95 1.0 95 1 95 KN/m
V4- Due to strip load ffsx SL 1.5 37.5 1 25.0 1.0 25.0 0 0.0 KN/m
RV-Total factored V1+V2+V3+V4 2140.0 1256.3 1256.3 1316.5 KN/m

Sliding along base

Formula used Case A Case B Case C Seismic Units
Sliding P1+P2+P3 Static And
469.7 469.7 249.1 480.4 KN/m
forces (P1+P2+P3+PIR +50 %
Resisting
force Rv* (tanØ'p/fms)+
1235.5 725.3 725.3 760.1 KN/m
(Static)/ (c3*L/fms)
(Seismic)

Calculation of Disturbing moment (Md)

Moment Formula used Case A Case B Case C Units
Md1-Earth pressure P1 x H /3 853.3 853.3 568.9 KN-m
Md2- Live Load P2 x H /2 384.00 384.00 0.00 KN-m
Md3- Dead load P3 x H /2 215 215 143 KN-m
Md4- Horziontal strip P4 x H 0.0 0.0 0.0 KN-m
Md-Total factored Md1+Md2+Md3+Md4 1452.1 1452.1 712.0 KN-m

Calculation of overturning moment (Mo) Seismic

Moment Formula used Seismic Unit
MO1-Earth pressure P1 x H /3 568.89 KN-m
Mo2- Live Load P2 x H /2 128.00 KN-m
Mo3- Due to horizontal P3 x H /2 143.15 KN-m
Mo4- Due to horizontal PIRx H/2 585.2 KN-m
Mo5- Due to seismic 0.5x PAE x0.6x H 254.1 KN-m
Mo-Total factored Mo1+Mo2+Mo3+Mo4 1679.37 KN-m

Calculation of Resistingt moment (M r )

Moment Formula used Case A Case B Case C Seismic Units
Mr1-Reinforced fill V1 x L /2 6049.2 4032.8 4032.8 4032.8 KN-m
Mr2- Live Load V2 x Lc /2 907.4 0.0 0.0 - KN-m
Mr3- Dead load V3 x Lc /2 507 338 338 338.2511 KN-m
Mr4- Vertical strip load V4 x d 37.5 25.0 25.0 - KN-m
Mr-Total factored Mr1+Mr2+Mr3+Mr4 7501.5 4396.1 4396.1 4371.1 KN-m

Summary Table: -1
Case Rv Rh Mr Md Mo MRBP e,(m) Md/Rv L/6 ,(m)
A 2140.0 469.7 7501.5 1452.1 1237.3 - 0.623 0.68 1.18
B 1256.3 469.7 4396.1 1452.1 1237.3 - 1.036 1.16 1.18
C 1256.3 249.1 4396.1 712.0 568.9 - 0.504 0.57 1.18
Seismic 1316.5 480.4 4371.1 - 1679.4 4673.5 1.28 - 2.37 L/3

151
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8 m
R0 MPL/RE/23/PW-1 19-Apr-23

Bearing pressure (qref) Mayerhoff (Base

distribution
length is Used)
Bearing pressure Formula used Case A Case B Case C Seismic Unit
qref Rv x/(L-2e) 365.5 249.8 206.2 289.4 KN/m2
qult cfNc+qNq+0.5(L-2e)g3Ng 1679.4 1494.4 1732.8 1386.9 KN/m2
qsafe qult./fms+gf*dm 1219.5 1087.4 1257.7 1010.6 KN/m2

Factor of saftey table

Permisibl
Bearing Overturni e e< L/6
Case failure ng Sliding Ecentricity ,e m FOS
A 3.34 5.17 2.63 0.623 1.183 1.90
B 4.35 3.0 1.54 1.036 1.183 1.14
C 6.10 6.2 2.91 0.504 1.183 2.35
Seismic 4.79 2.6 1.6 1.276 2.367 1.86
Wall External stablity status

Parameter Case A Case B Case C Seismic Req. F.O.S

Bearing
Safe Safe Safe Safe 1.4
General Shearfailure
Overturning Safe Safe Safe Safe 1.2
Sliding Safe Safe Safe Safe 1.2
Ecentricity Safe Safe Safe Safe 1

152
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8 m
R0 MPL/RE/23/PW-1 19-Apr-23

Internal stability analysis (Static)

A) Check for Rupture of reinforcement Q = 0.29

Case A
Elevation Vertical
Length of Strap Elevation
Strap from spacing
Strap ,L spacing from Top, Rhj Rvj Mdj Mrj Mo
layers base, hi of Strap,
(m) ,m hj ,m
,m Svj ,m
1 7.1 0.4 0.4 7.6 0.800 431.0 2017.3 1272.0 7161.5 1078.2 0.0
2 6.6 0.8 1.2 6.8 0.800 358.4 1716.9 956.6 5665.6 801.5 0.0
3 5.9 0.8 2.0 6.0 0.800 292.3 1393.2 696.8 4109.8 576.0 0.0
4 5.9 0.8 2.8 5.2 0.800 232.5 1251.6 487.3 3692.1 396.6 0.0
5 6.1 0.8 3.6 4.4 0.800 179.1 1147.6 323.1 3500.2 258.1 0.0
6 6.4 0.8 4.4 3.6 0.800 132.2 1050.4 199.0 3361.4 155.5 0.0
7 6.9 0.8 5.2 2.8 0.800 91.6 966.9 109.9 3335.8 83.6 0.0
8 7.4 0.8 6.0 2.0 0.800 57.4 859.4 50.8 3179.6 37.3 0.0
9 8.4 0.8 6.8 1.2 0.800 29.7 773.9 16.4 3250.3 11.5 0.0
10 10.6 0.8 7.6 0.4 0.800 8.3 722.2 1.6 3827.5 1.1 0.0
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

153
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.5 1/6
0.63 5.80 345.49 92.13 1.72 0.0 0.0 93.86 6.64 0.09 Safe Safe
0.56 5.40 312.98 83.46 1.85 0.0 0.0 85.31 7.07 0.08 Safe Safe
0.50 5.00 284.34 75.82 2.00 0.0 0.0 77.82 7.14 0.08 Safe Safe
0.39 4.60 244.39 65.17 2.17 0.0 0.0 67.34 9.31 0.07 Safe Safe
0.28 4.20 207.26 55.27 2.38 0.0 0.0 57.65 13.56 0.05 Safe Safe
0.19 3.80 174.46 46.52 2.63 0.0 0.0 49.15 21.61 0.03 Safe Safe
0.11 3.40 144.91 38.64 2.94 0.0 0.0 41.58 39.89 0.02 Safe Safe
0.06 3.00 118.01 31.47 3.33 0.0 0.0 34.80 85.17 0.01 Safe Safe
0.02 2.60 92.60 24.69 3.85 0.0 0.0 28.54 282.15 0.00 Safe Safe
0.00 2.20 68.16 18.18 4.55 0.0 0.0 22.72 3588.32 0.00 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

154
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Case B
Elevation Vertical
Length of Strap Elevation
Strap from spacing
Strap ,L spacing from Top, Rhj Rvj Mdj Mrj Mo
layers base, hi of Strap,
(m) ,m hj ,m
,m Svj ,m
1 7.1 0.4 0.4 7.6 0.8 431.00 1174.48 1271.97 4169.4 1078.19
2 6.6 0.8 1.2 6.8 0.8 358.43 986.17 956.63 3254.4 801.49
3 5.9 0.8 2 6 0.8 292.26 787.18 696.78 2322.2 576.00
4 5.9 0.8 2.8 5.2 0.8 232.49 692.78 487.31 2043.7 396.59
5 6.1 0.8 3.6 4.4 0.8 179.12 618.66 323.09 1886.9 258.13
6 6.4 0.8 4.4 3.6 0.8 132.16 546.69 199.00 1749.4 155.52
7 6.9 0.8 5.2 2.8 0.8 91.59 479.00 109.93 1652.5 83.63
8 7.4 0.8 6 2 0.8 57.42 395.31 50.75 1462.6 37.33
9 8.4 0.8 6.8 1.2 0.8 29.65 314.33 16.35 1320.2 11.52
10 10.6 0.8 7.6 0.4 0.8 8.28 227.05 1.60 1203.4 1.07
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

155
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.35 1/6
1.08 5.80 238.04 63.48 1.15 0.0 0.0 64.63 3.867 0.153 Safe Safe
0.97 5.40 211.63 56.43 1.23 0.0 0.0 57.67 4.060 0.147 Safe Safe
0.89 5.00 190.61 50.83 1.33 0.0 0.0 52.16 4.032 0.150 Safe Safe
0.70 4.60 154.18 41.12 1.45 0.0 0.0 42.57 5.153 0.119 Safe Safe
0.52 4.20 122.37 32.63 1.59 0.0 0.0 34.22 7.310 0.086 Safe Safe
0.36 3.80 96.38 25.70 1.75 0.0 0.0 27.46 11.249 0.057 Safe Safe
0.23 3.40 74.37 19.83 1.96 0.0 0.0 21.79 19.761 0.033 Safe Safe
0.13 3.00 55.34 14.76 2.22 0.0 0.0 16.98 39.178 0.017 Safe Safe
0.05 2.60 37.89 10.10 2.56 0.0 0.0 12.67 114.599 0.006 Safe Safe
0.01 2.20 21.45 5.72 3.03 0.0 0.0 8.75 1128.165 0.001 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

156
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8 m
R0 MPL/RE/23/PW-1 19-Apr-23

Case C
Elevation Vertical
Length of Strap from Elevation spacing
Strap Strap ,L spacing base, hi from Top, of Strap,
layers (m) ,m ,m hj ,m Svj ,m Rhj Rvj Mdj Mrj Mo
1 7.1 0.4 0.4 7.6 0.8 226.53 1174.48 616.94 4169.41 487.75
2 6.6 0.8 1.2 6.8 0.8 184.55 986.17 452.79 3254.37 349.37
3 5.9 0.8 2 6 0.8 146.84 787.18 320.52 2322.18 240.00
4 5.9 0.8 2.8 5.2 0.8 113.39 692.78 216.71 2043.70 156.23
5 6.1 0.8 3.6 4.4 0.8 84.22 618.66 137.95 1886.92 94.65
6 6.4 0.8 4.4 3.6 0.8 59.30 546.69 80.83 1749.40 51.84
7 6.9 0.8 5.2 2.8 0.8 38.66 479.00 41.93 1652.54 24.39
8 7.4 0.8 6 2 0.8 22.28 395.31 17.84 1462.64 8.89
9 8.4 0.8 6.8 1.2 0.8 10.17 314.33 5.14 1320.18 1.92
10 10.6 0.8 7.6 0.4 0.8 2.32 227.05 0.43 1203.38 0.07
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

157
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.35 1/6
0.53 5.80 194.15 51.77 1.15 0.0 0.0 52.92 8.55 0.07 Safe Safe
0.46 5.40 173.57 46.29 1.23 0.0 0.0 47.52 9.31 0.07 Safe Safe
0.41 5.00 154.78 41.28 1.33 0.0 0.0 42.61 9.68 0.07 Safe Safe
0.31 4.60 131.35 35.03 1.45 0.0 0.0 36.48 13.08 0.05 Safe Safe
0.22 4.20 109.42 29.18 1.59 0.0 0.0 30.77 19.94 0.04 Safe Safe
0.15 3.80 89.56 23.88 1.75 0.0 0.0 25.64 33.75 0.02 Safe Safe
0.09 3.40 71.23 18.99 1.96 0.0 0.0 20.95 67.75 0.01 Safe Safe
0.05 3.00 54.08 14.42 2.22 0.0 0.0 16.64 164.55 0.01 Safe Safe
0.02 2.60 37.57 10.02 2.56 0.0 0.0 12.58 687.59 0.00 Safe Safe
0.00 2.20 21.43 5.71 3.03 0.0 0.0 8.74 16922.47 0.00 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

158
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8 m
R0 MPL/RE/23/PW-1 19-Apr-23

Seismic Analysis
Elevation Vertical
Length of Strap from Elevation spacing
Strap Strap ,L spacing base, hi from Top, of Strap,
layers (m) ,m ,m hj ,m Svj ,m Rhj Rvj Mo Mrj PI=Wa*Am
1 7.1 0.4 0.4 7.6 0.8 369.49 1259.68 1375.07 4169.41 76.23
2 6.6 0.8 1.2 6.8 0.8 299.00 1065.37 999.08 3254.37 61.03
3 5.9 0.8 2 6 0.8 235.94 857.98 698.62 2322.18 47.51
4 5.9 0.8 2.8 5.2 0.8 180.32 763.58 465.24 2043.70 35.69
5 6.1 0.8 3.6 4.4 0.8 132.13 691.86 290.50 1886.92 25.55
6 6.4 0.8 4.4 3.6 0.8 91.38 623.49 165.95 1749.40 17.10
7 6.9 0.8 5.2 2.8 0.8 58.06 561.80 83.14 1652.54 10.35
8 7.4 0.8 6 2 0.8 32.18 484.11 33.62 1462.64 5.28
9 8.4 0.8 6.8 1.2 0.8 13.73 415.13 8.93 1320.18 1.90
10 10.6 0.8 7.6 0.4 0.8 2.72 354.25 0.64 1203.38 0.21
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

159
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Rsvj Check for Check for
Mr/Mo
Ecentricit (for overturni eccentrici
Dj svj Tpj Tmd Tj (Overturi e/L
y, ej Internal ngMr/Mo tye / L ≤
ning)
Sliding) ≥ 1.125 1/3
1.33 5.80 283.93 75.71 10.86 86.6 618.2 3.03 0.19 Safe Safe
1.18 5.40 251.63 67.10 7.48 74.6 522.8 3.26 0.18 Safe Safe
1.06 5.00 226.70 60.45 4.68 65.1 421.1 3.32 0.18 Safe Safe
0.88 4.60 184.69 49.25 3.17 52.4 374.7 4.39 0.15 Safe Safe
0.74 4.20 149.92 39.98 2.13 42.1 339.5 6.50 0.12 Safe Safe
0.66 3.80 122.75 32.73 1.37 34.1 306.0 10.54 0.10 Safe Safe
0.66 3.40 100.55 26.81 0.84 27.7 275.7 19.88 0.10 Safe Safe
0.75 3.00 82.00 21.87 0.43 22.3 237.6 43.51 0.10 Safe Safe
1.04 2.60 65.71 17.52 0.18 17.7 203.7 147.78 0.12 Safe Safe
1.90 2.20 52.17 13.91 0.03 13.9 173.8 1878.63 0.18 Safe Safe
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

160
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Rupture check for Reinforcement FOS REQ = 1.000

MAX Tj
Strap CASE Width of Force per Width of FOS FOS
hj T avialable
Type A,B,C & Panel strip Strip Status Status
SEISMIC
7.60 100 KN 49.83 93.86 2.00 46.93 0.09 1.062 Safe
6.80 100 KN 49.83 85.31 2.00 42.66 0.09 1.168 Safe
6.00 85 KN 41.96 77.82 2.00 38.91 0.09 1.078 Safe
5.20 75 KN 36.68 67.34 2.00 33.67 0.09 1.089 Safe
4.40 60 KN 29.34 57.65 2.00 28.83 0.09 1.018 Safe
3.60 60 KN 29.34 49.15 2.00 24.58 0.09 1.194 Safe
2.80 50 KN 24.46 41.58 2.00 20.79 0.09 1.176 Safe
2.00 40 KN 19.56 34.80 2.00 17.40 0.09 1.124 Safe
1.20 30 KN 14.67 28.54 2.00 14.27 0.09 1.028 Safe
0.40 30 KN 14.67 22.72 2.00 11.36 0.09 1.292 Safe
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -

161
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check For Internal Sliding
Strap
length Load case A Load case B Seismic Fos>=1.3 Fos>=1.3 Fos>=1.125
Rhj Rvj Rsvj FOS Rhj Rvj Rsvj FOS FOS Case A Case B Seismic
7.1 431.0 2017.3 990.0 2.297 431.0 1174.5 576.4 1.337 1.673 Safe Safe Safe
6.6 358.4 1716.9 842.5 2.351 358.4 986.2 484.0 1.350 1.749 Safe Safe Safe
5.9 292.3 1393.2 683.7 2.339 292.3 787.2 386.3 1.322 1.785 Safe Safe Safe
5.9 232.5 1251.6 614.2 2.642 232.5 692.8 340.0 1.462 2.078 Safe Safe Safe
6.1 179.1 1147.6 563.2 3.144 179.1 618.7 303.6 1.695 2.570 Safe Safe Safe
6.4 132.2 1050.4 515.5 3.901 132.2 546.7 268.3 2.030 3.348 Safe Safe Safe
6.9 91.6 966.9 474.5 5.181 91.6 479.0 235.1 2.567 4.748 Safe Safe Safe
7.4 57.4 859.4 421.7 7.345 57.4 395.3 194.0 3.379 7.383 Safe Safe Safe
8.4 29.7 773.9 379.8 12.808 29.7 314.3 154.3 5.202 14.835 Safe Safe Safe
10.6 8.3 722.2 354.4 42.782 8.3 227.1 111.4 13.451 63.946 Safe Safe Safe
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -

162
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8 m
R0 MPL/RE/23/PW-1 19-Apr-23

Pull out or Adherence of Reinforcement check

(Pj) = Perimeter of jth layer total horizontal width of Strap of top and bottom faces = 0.180 m

Elevation Vertical Cofficient

Elevation Effective
from spacing Strap of
from Top, length of Case A Tj Puj FOS ≥ 1
base, hi of Strap, length Friction.
hj ,m Strap
,m Svj ,m m
7.6 0.4 0.8 7.1 6.87 93.86 0.491 231.63 2.468
6.8 1.2 0.8 6.6 5.91 85.31 0.491 179.93 2.109
6 2 0.8 5.9 4.75 77.82 0.491 129.06 1.658
5.2 2.8 0.8 5.9 4.28 67.34 0.491 102.53 1.522
4.4 3.6 0.8 6.1 4.02 57.65 0.491 83.14 1.442
3.6 4.4 0.8 6.4 3.86 49.15 0.491 67.21 1.367
2.8 5.2 0.8 6.9 3.90 41.58 0.491 55.16 1.326
2 6 0.8 7.4 3.94 34.80 0.491 42.86 1.231
1.2 6.8 0.8 8.4 4.47 28.54 0.491 34.13 1.196
0.4 7.6 0.8 10.6 6.21 22.72 0.491 27.12 1.194
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -

163
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8 m
R0 MPL/RE/23/PW-1 19-Apr-23

Pr
Seismic Pullout FoS nos of
Case B Tj Puj FOS Case C Tj Puj FOS Status
Tj Resistanc Pullout Strip/m
e
64.63 200.75 3.106 64.63 200.75 3.106 86.6 136.51 1.577 2 Safe
28.83 155.94 5.408 57.67 155.94 2.704 74.6 106.04 1.422 2 Safe
26.08 111.85 4.288 52.16 111.85 2.144 65.1 76.06 1.168 2 Safe
21.28 88.86 4.175 42.57 88.86 2.088 52.4 60.42 1.153 2 Safe
17.11 72.06 4.211 34.22 72.06 2.106 42.1 49.00 1.164 2 Safe
13.73 58.25 4.243 27.46 58.25 2.121 34.1 39.61 1.161 2 Safe
10.90 47.80 4.387 21.79 47.80 2.194 27.7 32.51 1.176 2 Safe
8.49 37.15 4.375 16.98 37.15 2.188 22.3 25.26 1.133 2 Safe
6.33 29.58 4.670 12.67 29.58 2.335 17.7 20.11 1.136 2 Safe
4.37 23.51 5.373 8.75 23.51 2.687 13.9 15.99 1.147 2 Safe
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

164
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8 m
R0 MPL/RE/23/PW-1 19-Apr-23

From Bottom Layer DESIGN HT=

8.000 m

Elevation
Strap Strap No. of
Sr No from
Grade Length Connector
bottom

1 100 KN 7.1 0.4 2

2 100 KN 6.6 1.2 2
3 85 KN 5.9 2.0 2
4 75 KN 5.9 2.8 2
5 60 KN 6.1 3.6 2
6 60 KN 6.4 4.4 2
7 50 KN 6.9 5.2 2
8 40 KN 7.4 6.0 2
9 30 KN 8.4 6.8 2
10 30 KN 10.6 7.6 2
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -

165
10. CALCULATION FOR HEIGHT 8.8
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8.8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Wall Geometry
Height of facing H = 7.800 m
Soil Height (Earth crust) = 0.61 m
Embedment depth Dm = 1.00 m
Total height of the wall = 9.41 m
Design Height (H) = 8.800 m
Mechanical height (Hm) = 9.41 m
Minimum length of Reinforcement = 6.16 m (0.7*H)
Trail Length of Strap (L) = 6.16 m (Minimum Required)
Length of Strap (L) = 8.2 m
0

0
Dead load surcharge 2nd Tier + qd (Earth Crust) = 13.42 kPa
0 kPa
φ = 30.00 degree
δ = 20.00 degree
α 87.709 degree
β 0.00 degree
0

External stablity analysis (Static)

Length of Strap = 8.2 m
For reinforced soil:
Ka1 = (1-sinØ1)/(1+sinØ1)
0.333
Wall batter θ = 2.291 deg.

For retrained backfill soil:

Ka2 = (1-sinØ2)/(1+sinØ2)
0.333

Am = 0.23

ʎ = = 12.883088

α = 87.709
φ = 30.00
β = 0

KAE = 0.514 Considering Am>0

KAE 0.349 Considering Am=0

DKAE = 0.1654

Calculation of factored Horizontal load (Rh)

Type of Force Formula used P.F (ffs) Case A P.F (ffs) Case B P.F (ffs) Case C P.F (ffs) Seismic Units
P1- Earth pressure ½ x ka2 x γ2 x H2 x ffs 1.5 387.2 1.5 387.2 1.0 258.1 1.0 258.13 KN/m
P2- Earth pressure due ka2 x qL x H x ffs 1.5 105.60 1.5 105.60 0.0 0.00 0.50 35.20 KN/m
P3- Due to dead load ka2 x qd x H x ffs 1.5 59.05 1.5 59.05 1.0 39.37 1.00 39.37 KN/m
P4- Horizontal strip ffsx FL 1.5 0 1.5 0 1.0 0 0 0 KN/m
PIR 0.5 x am x g1 x H2 - - - - - - 1 177.03 KN/m
(50%)PAE 50% of (0.5 x KAE x g3 x H2) - - - - - - 1 64.06 KN/m
Rh-Total factored (P1+P2+P3+P4) for case 551.8 551.8 297.5 573.8 KN/m

Calculation of factored vertical loads (Rv)

167
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8.8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Calculation of factored vertical loads (Rv)
Type of Force Formula used P.F (ffs) Case A P.F (ffs) Case B P.F (ffs) Case C P.F (ffs) Seismic Units
V1-Self weight of γ1 x H x Lxffs 1.5 2164.8 1 1443.2 1.0 1443.2 1.0 1443.2 KN/m
V2- Due to live load qL x L x ffs 1.5 295.20 0 0.00 0.0 0.00 0.5 98.40 KN/m
V3- Due to dead load qd x L x ffs 1.5 165 1 110 1.0 110 1 110 KN/m
V4- Due to strip load ffsx SL 1.5 37.5 1 25.0 1.0 25.0 0 0.0 KN/m
RV-Total factored V1+V2+V3+V4 2662.6 1578.2 1578.2 1651.6 KN/m

Sliding along base

Formula used Case A Case B Case C Seismic Units
Sliding P1+P2+P3 Static And
551.8 551.8 297.5 573.8 KN/m
forces (P1+P2+P3+PIR +50 %
Resisting
force Rv* (tanØ'p/fms)+
1537.2 911.2 911.2 953.6 KN/m
(Static)/ (c3*L/fms)
(Seismic)

Calculation of Disturbing moment (Md)

Moment Formula used Case A Case B Case C Units
Md1-Earth pressure P1 x H /3 1135.8 1135.8 757.2 KN-m
Md2- Live Load P2 x H /2 464.64 464.64 0.00 KN-m
Md3- Dead load P3 x H /2 260 260 173 KN-m
Md4- Horziontal strip P4 x H 0.0 0.0 0.0 KN-m
Md-Total factored Md1+Md2+Md3+Md4 1860.2 1860.2 930.4 KN-m

Calculation of overturning moment (Mo) Seismic

Moment Formula used Seismic Unit
MO1-Earth pressure P1 x H /3 757.19 KN-m
Mo2- Live Load P2 x H /2 154.88 KN-m
Mo3- Due to horizontal P3 x H /2 173.21 KN-m
Mo4- Due to horizontal PIRx H/2 778.9 KN-m
Mo5- Due to seismic 0.5x PAE x0.6x H 338.2 KN-m
Mo-Total factored Mo1+Mo2+Mo3+Mo4 2202.44 KN-m

Calculation of Resistingt moment (M r )

Moment Formula used Case A Case B Case C Seismic Units
Mr1-Reinforced fill V1 x L /2 8875.7 5917.1 5917.1 5917.1 KN-m
Mr2- Live Load V2 x Lc /2 1210.3 0.0 0.0 - KN-m
Mr3- Dead load V3 x Lc /2 677 451 451 451.1804 KN-m
Mr4- Vertical strip load V4 x d 37.5 25.0 25.0 - KN-m
Mr-Total factored Mr1+Mr2+Mr3+Mr4 10800.3 6393.3 6393.3 6368.3 KN-m

Summary Table: -1
Case Rv Rh Mr Md Mo MRBP e,(m) Md/Rv L/6 ,(m)
A 2662.6 551.8 10800.3 1860.2 1600.4 - 0.645 0.70 1.37
B 1578.2 551.8 6393.3 1860.2 1600.4 - 1.063 1.18 1.37
C 1578.2 297.5 6393.3 930.4 757.2 - 0.529 0.59 1.37
Seismic 1651.6 573.8 6368.3 - 2202.4 6771.7 1.33 - 2.73 L/3

168
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8.8 m
R0 MPL/RE/23/PW-1 19-Apr-23

Bearing pressure (qref) Mayerhoff (Base

distribution
length is Used)
Bearing pressure Formula used Case A Case B Case C Seismic Unit
qref Rv x/(L-2e) 385.3 259.8 221.0 298.5 KN/m2
qult cfNc+qNq+0.5(L-2e)g3Ng 1916.0 1728.5 1967.9 1607.4 KN/m2
qsafe qult./fms+gf*dm 1388.5 1254.6 1425.6 1168.1 KN/m2

Factor of saftey table

Permisibl
Bearing Overturni e e< L/6
Case failure ng Sliding Ecentricity ,e m FOS
A 3.60 5.81 2.79 0.645 1.367 2.12
B 4.83 3.4 1.65 1.063 1.367 1.29
C 6.45 6.9 3.06 0.529 1.367 2.58
Seismic 5.38 2.9 1.7 1.333 2.733 2.05
Wall External stablity status

Parameter Case A Case B Case C Seismic Req. F.O.S

Bearing
Safe Safe Safe Safe 1.4
General Shearfailure
Overturning Safe Safe Safe Safe 1.2
Sliding Safe Safe Safe Safe 1.2
Ecentricity Safe Safe Safe Safe 1

169
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8.8 m
R0 MPL/RE/23/PW-1 19-Apr-23

Internal stability analysis (Static)

A) Check for Rupture of reinforcement Q = 0.29

Case A
Elevation Vertical
Length of Strap Elevation
Strap from spacing
Strap ,L spacing from Top, Rhj Rvj Mdj Mrj Mo
layers base, hi of Strap,
(m) ,m hj ,m
,m Svj ,m
1 8.2 0.4 0.4 8.4 0.800 510.0 2526.7 1647.9 10359.3 1411.2 0.0
2 7.0 0.8 1.2 7.6 0.800 431.0 1988.9 1272.0 6961.2 1078.2 0.0
3 6.5 0.8 2.0 6.8 0.800 358.4 1690.8 956.6 5495.2 801.5 0.0
4 6.2 0.8 2.8 6.0 0.800 292.3 1464.0 696.8 4538.4 576.0 0.0
5 6.2 0.8 3.6 5.2 0.800 232.5 1315.2 487.3 4077.1 396.6 0.0
6 6.5 0.8 4.4 4.4 0.800 179.1 1222.8 323.1 3974.2 258.1 0.0
7 7.0 0.8 5.2 3.6 0.800 132.2 1148.9 199.0 4021.2 155.5 0.0
8 7.2 0.8 6.0 2.8 0.800 91.6 1008.9 109.9 3632.2 83.6 0.0
9 8.0 0.8 6.8 2.0 0.800 57.4 929.0 50.8 3716.2 37.3 0.0
10 9.0 0.8 7.6 1.2 0.800 29.7 829.2 16.4 3731.3 11.5 0.0
11 11.0 0.8 8.4 0.4 0.800 8.3 749.4 1.6 4121.9 1.1 0.0
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

170
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8.8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.5 1/6
0.65 6.20 366.42 97.71 1.61 0.0 0.0 99.32 7.34 0.08 Safe Safe
0.64 5.80 347.65 92.71 1.72 0.0 0.0 94.43 6.46 0.09 Safe Safe
0.57 5.40 314.96 83.99 1.85 0.0 0.0 85.84 6.86 0.09 Safe Safe
0.48 5.00 278.96 74.39 2.00 0.0 0.0 76.39 7.88 0.08 Safe Safe
0.37 4.60 240.93 64.25 2.17 0.0 0.0 66.42 10.28 0.06 Safe Safe
0.26 4.20 204.78 54.61 2.38 0.0 0.0 56.99 15.40 0.04 Safe Safe
0.17 3.80 172.68 46.05 2.63 0.0 0.0 48.68 25.86 0.02 Safe Safe
0.11 3.40 144.50 38.53 2.94 0.0 0.0 41.48 43.43 0.02 Safe Safe
0.05 3.00 117.74 31.40 3.33 0.0 0.0 34.73 99.54 0.01 Safe Safe
0.02 2.60 92.54 24.68 3.85 0.0 0.0 28.52 323.89 0.00 Safe Safe
0.00 2.20 68.16 18.18 4.55 0.0 0.0 22.72 3864.25 0.00 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

171
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8.8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Case B
Elevation Vertical
Length of Strap Elevation
Strap from spacing
Strap ,L spacing from Top, Rhj Rvj Mdj Mrj Mo
layers base, hi of Strap,
(m) ,m hj ,m
,m Svj ,m
1 8.2 0.4 0.4 8.4 0.8 509.96 1487.64 1647.93 6099.3 1411.20
2 7 0.8 1.2 7.6 0.8 431.00 1157.94 1271.97 4052.8 1078.19
3 6.5 0.8 2 6.8 0.8 358.43 971.23 956.63 3156.5 801.49
4 6.2 0.8 2.8 6 0.8 292.26 827.20 696.78 2564.3 576.00
5 6.2 0.8 3.6 5.2 0.8 232.49 728.00 487.31 2256.8 396.59
6 6.5 0.8 4.4 4.4 0.8 179.12 659.23 323.09 2142.5 258.13
7 7 0.8 5.2 3.6 0.8 132.16 597.94 199.00 2092.8 155.52
8 7.2 0.8 6 2.8 0.8 91.59 499.82 109.93 1799.4 83.63
9 8 0.8 6.8 2 0.8 57.42 427.36 50.75 1709.4 37.33
10 9 0.8 7.6 1.2 0.8 29.65 336.78 16.35 1515.5 11.52
11 11 0.8 8.4 0.4 0.8 8.28 235.62 1.60 1295.9 1.07
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

172
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8.8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.35 1/6
1.11 6.20 248.58 66.29 1.08 0.0 0.0 67.36 4.322 0.135 Safe Safe
1.10 5.80 241.08 64.29 1.15 0.0 0.0 65.44 3.759 0.157 Safe Safe
0.98 5.40 214.40 57.17 1.23 0.0 0.0 58.41 3.938 0.152 Safe Safe
0.84 5.00 183.20 48.85 1.33 0.0 0.0 50.19 4.452 0.136 Safe Safe
0.67 4.60 149.76 39.94 1.45 0.0 0.0 41.38 5.691 0.108 Safe Safe
0.49 4.20 119.43 31.85 1.59 0.0 0.0 33.44 8.300 0.075 Safe Safe
0.33 3.80 94.40 25.17 1.75 0.0 0.0 26.93 13.457 0.048 Safe Safe
0.22 3.40 73.94 19.72 1.96 0.0 0.0 21.68 21.517 0.031 Safe Safe
0.12 3.00 55.05 14.68 2.22 0.0 0.0 16.90 45.789 0.015 Safe Safe
0.05 2.60 37.83 10.09 2.56 0.0 0.0 12.65 131.555 0.005 Safe Safe
0.01 2.20 21.45 5.72 3.03 0.0 0.0 8.75 1214.916 0.001 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

173
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8.8 m
R0 MPL/RE/23/PW-1 19-Apr-23

Case C
Elevation Vertical
Length of Strap from Elevation spacing
Strap Strap ,L spacing base, hi from Top, of Strap,
layers (m) ,m ,m hj ,m Svj ,m Rhj Rvj Mdj Mrj Mo
1 8.2 0.4 0.4 8.4 0.8 272.78 1487.64 816.38 6099.34 658.56
2 7 0.8 1.2 7.6 0.8 226.53 1157.94 616.94 4052.79 487.75
3 6.5 0.8 2 6.8 0.8 184.55 971.23 452.79 3156.50 349.37
4 6.2 0.8 2.8 6 0.8 146.84 827.20 320.52 2564.33 240.00
5 6.2 0.8 3.6 5.2 0.8 113.39 728.00 216.71 2256.81 156.23
6 6.5 0.8 4.4 4.4 0.8 84.22 659.23 137.95 2142.50 94.65
7 7 0.8 5.2 3.6 0.8 59.30 597.94 80.83 2092.79 51.84
8 7.2 0.8 6 2.8 0.8 38.66 499.82 41.93 1799.37 24.39
9 8 0.8 6.8 2 0.8 22.28 427.36 17.84 1709.44 8.89
10 9 0.8 7.6 1.2 0.8 10.17 336.78 5.14 1515.51 1.92
11 11 0.8 8.4 0.4 0.8 2.32 235.62 0.43 1295.91 0.07
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

174
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8.8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.35 1/6
0.55 6.20 209.45 55.85 1.08 0.0 0.0 56.93 9.26 0.07 Safe Safe
0.53 5.80 195.12 52.03 1.15 0.0 0.0 53.18 8.31 0.08 Safe Safe
0.47 5.40 174.44 46.52 1.23 0.0 0.0 47.75 9.03 0.07 Safe Safe
0.39 5.00 152.48 40.66 1.33 0.0 0.0 41.99 10.68 0.06 Safe Safe
0.30 4.60 129.89 34.64 1.45 0.0 0.0 36.09 14.45 0.05 Safe Safe
0.21 4.20 108.40 28.91 1.59 0.0 0.0 30.49 22.64 0.03 Safe Safe
0.14 3.80 88.85 23.69 1.75 0.0 0.0 25.45 40.37 0.02 Safe Safe
0.08 3.40 71.08 18.95 1.96 0.0 0.0 20.91 73.77 0.01 Safe Safe
0.04 3.00 53.98 14.40 2.22 0.0 0.0 16.62 192.31 0.01 Safe Safe
0.02 2.60 37.55 10.01 2.56 0.0 0.0 12.58 789.33 0.00 Safe Safe
0.00 2.20 21.43 5.71 3.03 0.0 0.0 8.74 18223.73 0.00 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

175
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8.8 m
R0 MPL/RE/23/PW-1 19-Apr-23

Seismic Analysis
Elevation Vertical
Length of Strap from Elevation spacing
Strap Strap ,L spacing base, hi from Top, of Strap,
layers (m) ,m ,m hj ,m Svj ,m Rhj Rvj Mo Mrj PI=Wa*Am
1 8.2 0.4 0.4 8.4 0.8 447.42 1586.04 1839.76 6099.34 93.13
2 7 0.8 1.2 7.6 0.8 369.49 1241.94 1378.93 4052.79 76.23
3 6.5 0.8 2 6.8 0.8 299.00 1049.23 1002.16 3156.50 61.03
4 6.2 0.8 2.8 6 0.8 235.94 901.60 701.02 2564.33 47.51
5 6.2 0.8 3.6 5.2 0.8 180.32 802.40 467.04 2256.81 35.69
6 6.5 0.8 4.4 4.4 0.8 132.13 737.23 291.79 2142.50 25.55
7 7 0.8 5.2 3.6 0.8 91.38 681.94 166.82 2092.79 17.10
8 7.2 0.8 6 2.8 0.8 58.06 586.22 83.66 1799.37 10.35
9 8 0.8 6.8 2 0.8 32.18 523.36 33.88 1709.44 5.28
10 9 0.8 7.6 1.2 0.8 13.73 444.78 9.03 1515.51 1.90
11 11 0.8 8.4 0.4 0.8 2.72 367.62 0.65 1295.91 0.21
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

176
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8.8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Rsvj Check for Check for
Mr/Mo
Ecentricit (for overturni eccentrici
Dj svj Tpj Tmd Tj (Overturi e/L
y, ej Internal ngMr/Mo tye / L ≤
ning)
Sliding) ≥ 1.125 1/3
1.41 6.20 295.28 78.74 13.53 92.3 778.3 3.32 0.17 Safe Safe
1.35 5.80 288.42 76.91 8.76 85.7 609.5 2.94 0.19 Safe Safe
1.20 5.40 255.50 68.13 5.95 74.1 514.9 3.15 0.18 Safe Safe
1.03 5.00 218.13 58.17 3.97 62.1 442.5 3.66 0.17 Safe Safe
0.87 4.60 179.87 47.97 2.68 50.6 393.8 4.83 0.14 Safe Safe
0.74 4.20 146.84 39.16 1.84 41.0 361.8 7.34 0.11 Safe Safe
0.68 3.80 120.73 32.19 1.25 33.4 334.7 12.55 0.10 Safe Safe
0.67 3.40 100.15 26.71 0.70 27.4 287.7 21.51 0.09 Safe Safe
0.80 3.00 81.74 21.80 0.39 22.2 256.8 50.45 0.10 Safe Safe
1.11 2.60 65.66 17.51 0.16 17.7 218.3 167.84 0.12 Safe Safe
1.98 2.20 52.17 13.91 0.02 13.9 180.4 1989.95 0.18 Safe Safe
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

177
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8.8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Rupture check for Reinforcement FOS REQ = 1.000

MAX Tj
Strap CASE Width of Force per Width of FOS FOS
hj T avialable
Type A,B,C & Panel strip Strip Status Status
SEISMIC
8.40 100 KN 49.83 99.32 2.00 49.66 0.09 1.003 Safe
7.60 100 KN 49.83 94.43 2.00 47.22 0.09 1.055 Safe
6.80 100 KN 49.83 85.84 2.00 42.92 0.09 1.161 Safe
6.00 85 KN 41.96 76.39 2.00 38.19 0.09 1.099 Safe
5.20 75 KN 36.68 66.42 2.00 33.21 0.09 1.104 Safe
4.40 60 KN 29.34 56.99 2.00 28.49 0.09 1.030 Safe
3.60 50 KN 24.46 48.68 2.00 24.34 0.09 1.005 Safe
2.80 50 KN 24.46 41.48 2.00 20.74 0.09 1.179 Safe
2.00 40 KN 19.56 34.73 2.00 17.37 0.09 1.126 Safe
1.20 30 KN 14.67 28.52 2.00 14.26 0.09 1.029 Safe
0.40 30 KN 14.67 22.72 2.00 11.36 0.09 1.292 Safe
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -

178
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8.8 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check For Internal Sliding
Strap
length Load case A Load case B Seismic Fos>=1.3 Fos>=1.3 Fos>=1.125
Rhj Rvj Rsvj FOS Rhj Rvj Rsvj FOS FOS Case A Case B Seismic
8.2 510.0 2526.7 1240.0 2.431 510.0 1487.6 730.1 1.432 1.740 Safe Safe Safe
7.0 431.0 1988.9 976.1 2.265 431.0 1157.9 568.3 1.318 1.650 Safe Safe Safe
6.5 358.4 1690.8 829.8 2.315 358.4 971.2 476.6 1.330 1.722 Safe Safe Safe
6.2 292.3 1464.0 718.5 2.458 292.3 827.2 405.9 1.389 1.875 Safe Safe Safe
6.2 232.5 1315.2 645.4 2.776 232.5 728.0 357.3 1.537 2.184 Safe Safe Safe
6.5 179.1 1222.8 600.1 3.350 179.1 659.2 323.5 1.806 2.738 Safe Safe Safe
7.0 132.2 1148.9 563.8 4.266 132.2 597.9 293.4 2.220 3.662 Safe Safe Safe
7.2 91.6 1008.9 495.1 5.406 91.6 499.8 245.3 2.678 4.955 Safe Safe Safe
8.0 57.4 929.0 455.9 7.940 57.4 427.4 209.7 3.652 7.981 Safe Safe Safe
9.0 29.7 829.2 406.9 13.723 29.7 336.8 165.3 5.574 15.895 Safe Safe Safe
11.0 8.3 749.4 367.8 44.397 8.3 235.6 115.6 13.958 66.359 Safe Safe Safe
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -

179
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8.8 m
R0 MPL/RE/23/PW-1 19-Apr-23

Pull out or Adherence of Reinforcement check

(Pj) = Perimeter of jth layer total horizontal width of Strap of top and bottom faces = 0.180 m

Elevation Vertical Cofficient

Elevation Effective
from spacing Strap of
from Top, length of Case A Tj Puj FOS ≥ 1
base, hi of Strap, length Friction.
hj ,m Strap
,m Svj ,m m
8.4 0.4 0.8 8.2 7.97 99.32 0.491 294.71 2.967
7.6 1.2 0.8 7.0 6.31 94.43 0.491 212.68 2.252
6.8 2 0.8 6.5 5.35 85.84 0.491 162.81 1.897
6 2.8 0.8 6.2 4.58 76.39 0.491 124.66 1.632
5.2 3.6 0.8 6.2 4.12 66.42 0.491 98.65 1.485
4.4 4.4 0.8 6.5 3.96 56.99 0.491 81.86 1.436
3.6 5.2 0.8 7.0 4.00 48.68 0.491 69.61 1.430
2.8 6 0.8 7.2 3.74 41.48 0.491 52.87 1.275
2 6.8 0.8 8.0 4.07 34.73 0.491 44.36 1.277
1.2 7.6 0.8 9.0 4.61 28.52 0.491 35.18 1.233
0.4 8.4 0.8 11.0 6.15 22.72 0.491 26.85 1.182
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -

180
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8.8 m
R0 MPL/RE/23/PW-1 19-Apr-23

Pr
Seismic Pullout FoS nos of
Case B Tj Puj FOS Case C Tj Puj FOS Status
Tj Resistanc Pullout Strip/m
e
67.36 255.42 3.792 67.36 255.42 3.792 92.3 173.68 1.882 2 Safe
32.72 184.32 5.634 65.44 184.32 2.817 85.7 125.34 1.463 2 Safe
29.20 141.10 4.832 58.41 141.10 2.416 74.1 95.95 1.295 2 Safe
25.09 108.04 4.305 50.19 108.04 2.153 62.1 73.46 1.182 2 Safe
20.69 85.50 4.132 41.38 85.50 2.066 50.6 58.14 1.148 2 Safe
16.72 70.95 4.244 33.44 70.95 2.122 41.0 48.24 1.177 2 Safe
13.46 60.33 4.481 26.93 60.33 2.241 33.4 41.02 1.227 2 Safe
10.84 45.82 4.227 21.68 45.82 2.114 27.4 31.16 1.137 2 Safe
8.45 38.45 4.549 16.90 38.45 2.275 22.2 26.15 1.178 2 Safe
6.33 30.49 4.820 12.65 30.49 2.410 17.7 20.73 1.173 2 Safe
4.37 23.27 5.320 8.75 23.27 2.660 13.9 15.83 1.136 2 Safe
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

181
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 8.8 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 8.8 m
R0 MPL/RE/23/PW-1 19-Apr-23

From Bottom Layer DESIGN HT=

8.800 m

Elevation
Strap Strap No. of
Sr No from
Grade Length Connector
bottom

1 100 KN 8.2 0.4 2

2 100 KN 7.0 1.2 2
3 100 KN 6.5 2.0 2
4 85 KN 6.2 2.8 2
5 75 KN 6.2 3.6 2
6 60 KN 6.5 4.4 2
7 50 KN 7.0 5.2 2
8 50 KN 7.2 6.0 2
9 40 KN 8.0 6.8 2
10 30 KN 9.0 7.6 2
11 30 KN 11.0 8.4 2
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -

182
11. CALCULATION FOR HEIGHT 9.6
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 9.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 9.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Wall Geometry
Height of facing H = 8.600 m
Soil Height (Earth crust) = 0.61 m
Embedment depth Dm = 1.00 m
Total height of the wall = 10.21 m
Design Height (H) = 9.600 m
Mechanical height (Hm) = 10.21 m
Minimum length of Reinforcement = 6.72 m (0.7*H)
Trail Length of Strap (L) = 6.72 m (Minimum Required)
Length of Strap (L) = 8.3 m
0

0
Dead load surcharge 2nd Tier + qd (Earth Crust) = 13.42 kPa
0 kPa
φ = 30.00 degree
δ = 20.00 degree
α 87.709 degree
β 0.00 degree
0

External stablity analysis (Static)

Length of Strap = 8.3 m
For reinforced soil:
Ka1 = (1-sinØ1)/(1+sinØ1)
0.333
Wall batter θ = 2.291 deg.

For retrained backfill soil:

Ka2 = (1-sinØ2)/(1+sinØ2)
0.333

Am = 0.23

ʎ = = 12.883088

α = 87.709
φ = 30.00
β = 0

KAE = 0.514 Considering Am>0

KAE 0.349 Considering Am=0

DKAE = 0.1654

Calculation of factored Horizontal load (Rh)

Type of Force Formula used P.F (ffs) Case A P.F (ffs) Case B P.F (ffs) Case C P.F (ffs) Seismic Units
P1- Earth pressure ½ x ka2 x γ2 x H2 x ffs 1.5 460.8 1.5 460.8 1.0 307.2 1.0 307.20 KN/m
P2- Earth pressure due ka2 x qL x H x ffs 1.5 115.20 1.5 115.20 0.0 0.00 0.50 38.40 KN/m
P3- Due to dead load ka2 x qd x H x ffs 1.5 64.42 1.5 64.42 1.0 42.94 1.00 42.94 KN/m
P4- Horizontal strip ffsx FL 1.5 0 1.5 0 1.0 0 0 0 KN/m
PIR 0.5 x am x g1 x H2 - - - - - - 1 210.68 KN/m
(50%)PAE 50% of (0.5 x KAE x g3 x H2) - - - - - - 1 76.24 KN/m
Rh-Total factored (P1+P2+P3+P4) for case 640.4 640.4 350.1 675.5 KN/m

Calculation of factored vertical loads (Rv)

184
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 9.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 9.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Calculation of factored vertical loads (Rv)
Type of Force Formula used P.F (ffs) Case A P.F (ffs) Case B P.F (ffs) Case C P.F (ffs) Seismic Units
V1-Self weight of γ1 x H x Lxffs 1.5 2390.4 1 1593.6 1.0 1593.6 1.0 1593.6 KN/m
V2- Due to live load qL x L x ffs 1.5 298.80 0 0.00 0.0 0.00 0.5 99.60 KN/m
V3- Due to dead load qd x L x ffs 1.5 167 1 111 1.0 111 1 111 KN/m
V4- Due to strip load ffsx SL 1.5 37.5 1 25.0 1.0 25.0 0 0.0 KN/m
RV-Total factored V1+V2+V3+V4 2893.8 1730.0 1730.0 1804.6 KN/m

Sliding along base

Formula used Case A Case B Case C Seismic Units
Sliding P1+P2+P3 Static And
640.4 640.4 350.1 675.5 KN/m
forces (P1+P2+P3+PIR +50 %
Resisting
force Rv* (tanØ'p/fms)+
1670.7 998.8 998.8 1041.9 KN/m
(Static)/ (c3*L/fms)
(Seismic)

Calculation of Disturbing moment (Md)

Moment Formula used Case A Case B Case C Units
Md1-Earth pressure P1 x H /3 1474.6 1474.6 983.0 KN-m
Md2- Live Load P2 x H /2 552.96 552.96 0.00 KN-m
Md3- Dead load P3 x H /2 309 309 206 KN-m
Md4- Horziontal strip P4 x H 0.0 0.0 0.0 KN-m
Md-Total factored Md1+Md2+Md3+Md4 2336.7 2336.7 1189.2 KN-m

Calculation of overturning moment (Mo) Seismic

Moment Formula used Seismic Unit
MO1-Earth pressure P1 x H /3 983.04 KN-m
Mo2- Live Load P2 x H /2 184.32 KN-m
Mo3- Due to horizontal P3 x H /2 206.13 KN-m
Mo4- Due to horizontal PIRx H/2 1011.3 KN-m
Mo5- Due to seismic 0.5x PAE x0.6x H 439.1 KN-m
Mo-Total factored Mo1+Mo2+Mo3+Mo4 2823.87 KN-m

Calculation of Resistingt moment (M r )

Moment Formula used Case A Case B Case C Seismic Units
Mr1-Reinforced fill V1 x L /2 9920.2 6613.4 6613.4 6613.4 KN-m
Mr2- Live Load V2 x Lc /2 1240.0 0.0 0.0 - KN-m
Mr3- Dead load V3 x Lc /2 693 462 462 462.2519 KN-m
Mr4- Vertical strip load V4 x d 37.5 25.0 25.0 - KN-m
Mr-Total factored Mr1+Mr2+Mr3+Mr4 11891.1 7100.7 7100.7 7075.7 KN-m

Summary Table: -1
Case Rv Rh Mr Md Mo MRBP e,(m) Md/Rv L/6 ,(m)
A 2893.8 640.4 11891.1 2336.7 2027.5 - 0.741 0.81 1.38
B 1730.0 640.4 7100.7 2336.7 2027.5 - 1.218 1.35 1.38
C 1730.0 350.1 7100.7 1189.2 983.0 - 0.614 0.69 1.38
Seismic 1804.6 675.5 7075.7 - 2823.9 7489.0 1.56 - 2.77 L/3

185
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 9.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 9.6 m
R0 MPL/RE/23/PW-1 19-Apr-23

Bearing pressure (qref) Mayerhoff (Base

distribution
length is Used)
Bearing pressure Formula used Case A Case B Case C Seismic Unit
qref Rv x/(L-2e) 424.5 295.0 244.6 349.0 KN/m2
qult cfNc+qNq+0.5(L-2e)g3Ng 1895.0 1681.8 1952.2 1526.2 KN/m2
qsafe qult./fms+gf*dm 1373.6 1221.3 1414.5 1110.1 KN/m2

Factor of saftey table

Permisibl
Bearing Overturni e e< L/6
Case failure ng Sliding Ecentricity ,e m FOS
A 3.24 5.09 2.61 0.741 1.383 1.87
B 4.14 3.0 1.56 1.218 1.383 1.14
C 5.78 6.0 2.85 0.614 1.383 2.25
Seismic 4.37 2.5 1.5 1.565 2.767 1.77
Wall External stablity status

Parameter Case A Case B Case C Seismic Req. F.O.S

Bearing
Safe Safe Safe Safe 1.4
General Shearfailure
Overturning Safe Safe Safe Safe 1.2
Sliding Safe Safe Safe Safe 1.2
Ecentricity Safe Safe Safe Safe 1

186
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 9.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 9.6 m
R0 MPL/RE/23/PW-1 19-Apr-23

Internal stability analysis (Static)

A) Check for Rupture of reinforcement Q = 0.29

Case A
Elevation Vertical
Length of Strap Elevation
Strap from spacing
Strap ,L spacing from Top, Rhj Rvj Mdj Mrj Mo
layers base, hi of Strap,
(m) ,m hj ,m
,m Svj ,m
1 8.3 0.4 0.4 9.2 0.800 595.3 2756.7 2089.6 11440.2 1805.7 0.0
2 8.8 0.8 1.2 8.4 0.800 510.0 2711.5 1647.9 11930.8 1411.2 0.0
3 7.0 0.8 2.0 7.6 0.800 431.0 1988.9 1272.0 6961.2 1078.2 0.0
4 6.8 0.8 2.8 6.8 0.800 358.4 1768.9 956.6 6014.2 801.5 0.0
5 6.8 0.8 3.6 6.0 0.800 292.3 1605.7 696.8 5459.3 576.0 0.0
6 6.8 0.8 4.4 5.2 0.800 232.5 1442.5 487.3 4904.4 396.6 0.0
7 6.8 0.8 5.2 4.4 0.800 179.1 1279.3 323.1 4349.6 258.1 0.0
8 7.3 0.8 6.0 3.6 0.800 132.2 1198.1 199.0 4373.2 155.5 0.0
9 7.8 0.8 6.8 2.8 0.800 91.6 1093.0 109.9 4262.8 83.6 0.0
10 8.3 0.8 7.6 2.0 0.800 57.4 963.9 50.8 4000.1 37.3 0.0
11 9.3 0.8 8.4 1.2 0.800 29.7 856.8 16.4 3984.2 11.5 0.0
12 11.5 0.8 9.2 0.4 0.800 8.3 783.5 1.6 4505.1 1.1 0.0
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

187
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 9.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 9.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.5 1/6
0.76 6.60 406.35 108.36 1.52 0.0 0.0 109.88 6.34 0.09 Safe Safe
0.61 6.20 357.51 95.34 1.61 0.0 0.0 96.95 8.45 0.07 Safe Safe
0.64 5.80 347.65 92.71 1.72 0.0 0.0 94.43 6.46 0.09 Safe Safe
0.54 5.40 309.33 82.49 1.85 0.0 0.0 84.34 7.50 0.08 Safe Safe
0.43 5.00 270.68 72.18 2.00 0.0 0.0 74.18 9.48 0.06 Safe Safe
0.34 4.60 235.53 62.81 2.17 0.0 0.0 64.98 12.37 0.05 Safe Safe
0.25 4.20 203.23 54.19 2.38 0.0 0.0 56.57 16.85 0.04 Safe Safe
0.17 3.80 171.95 45.85 2.63 0.0 0.0 48.49 28.12 0.02 Safe Safe
0.10 3.40 143.84 38.36 2.94 0.0 0.0 41.30 50.97 0.01 Safe Safe
0.05 3.00 117.62 31.37 3.33 0.0 0.0 34.70 107.15 0.01 Safe Safe
0.02 2.60 92.51 24.67 3.85 0.0 0.0 28.52 345.85 0.00 Safe Safe
0.00 2.20 68.15 18.17 4.55 0.0 0.0 22.72 4223.53 0.00 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

188
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 9.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 9.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Case B
Elevation Vertical
Length of Strap Elevation
Strap from spacing
Strap ,L spacing from Top, Rhj Rvj Mdj Mrj Mo
layers base, hi of Strap,
(m) ,m hj ,m
,m Svj ,m
1 8.3 0.4 0.4 9.2 0.8 595.33 1638.59 2089.62 6800.1 1805.65
2 8.8 0.8 1.2 8.4 0.8 509.96 1596.50 1647.93 7024.6 1411.20
3 7 0.8 2 7.6 0.8 431.00 1157.94 1271.97 4052.8 1078.19
4 6.8 0.8 2.8 6.8 0.8 358.43 1016.06 956.63 3454.6 801.49
5 6.8 0.8 3.6 6 0.8 292.26 907.26 696.78 3084.7 576.00
6 6.8 0.8 4.4 5.2 0.8 232.49 798.46 487.31 2714.8 396.59
7 6.8 0.8 5.2 4.4 0.8 179.12 689.66 323.09 2344.8 258.13
8 7.3 0.8 6 3.6 0.8 132.16 623.57 199.00 2276.0 155.52
9 7.8 0.8 6.8 2.8 0.8 91.59 541.48 109.93 2111.8 83.63
10 8.3 0.8 7.6 2 0.8 57.42 443.39 50.75 1840.1 37.33
11 9.3 0.8 8.4 1.2 0.8 29.65 348.01 16.35 1618.2 11.52
12 11.5 0.8 9.2 0.4 0.8 8.28 246.33 1.60 1416.4 1.07
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

189
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 9.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 9.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.35 1/6
1.28 6.60 285.00 76.00 1.01 0.0 0.0 77.01 3.766 0.154 Safe Safe
1.03 6.20 237.02 63.21 1.08 0.0 0.0 64.28 4.978 0.117 Safe Safe
1.10 5.80 241.08 64.29 1.15 0.0 0.0 65.44 3.759 0.157 Safe Safe
0.94 5.40 206.64 55.10 1.23 0.0 0.0 56.34 4.310 0.138 Safe Safe
0.77 5.00 172.35 45.96 1.33 0.0 0.0 47.29 5.355 0.113 Safe Safe
0.61 4.60 143.11 38.16 1.45 0.0 0.0 39.61 6.845 0.090 Safe Safe
0.47 4.20 117.63 31.37 1.59 0.0 0.0 32.95 9.084 0.069 Safe Safe
0.32 3.80 93.60 24.96 1.75 0.0 0.0 26.72 14.635 0.044 Safe Safe
0.20 3.40 73.23 19.53 1.96 0.0 0.0 21.49 25.252 0.026 Safe Safe
0.11 3.00 54.94 14.65 2.22 0.0 0.0 16.87 49.287 0.014 Safe Safe
0.05 2.60 37.80 10.08 2.56 0.0 0.0 12.64 140.471 0.005 Safe Safe
0.01 2.20 21.44 5.72 3.03 0.0 0.0 8.75 1327.873 0.001 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

190
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 9.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 9.6 m
R0 MPL/RE/23/PW-1 19-Apr-23

Case C
Elevation Vertical
Length of Strap from Elevation spacing
Strap Strap ,L spacing base, hi from Top, of Strap,
layers (m) ,m ,m hj ,m Svj ,m Rhj Rvj Mdj Mrj Mo
1 8.3 0.4 0.4 9.2 0.8 323.29 1638.59 1054.52 6800.13 865.21
2 8.8 0.8 1.2 8.4 0.8 272.78 1596.50 816.38 7024.58 658.56
3 7 0.8 2 7.6 0.8 226.53 1157.94 616.94 4052.79 487.75
4 6.8 0.8 2.8 6.8 0.8 184.55 1016.06 452.79 3454.59 349.37
5 6.8 0.8 3.6 6 0.8 146.84 907.26 320.52 3084.67 240.00
6 6.8 0.8 4.4 5.2 0.8 113.39 798.46 216.71 2714.75 156.23
7 6.8 0.8 5.2 4.4 0.8 84.22 689.66 137.95 2344.83 94.65
8 7.3 0.8 6 3.6 0.8 59.30 623.57 80.83 2276.02 51.84
9 7.8 0.8 6.8 2.8 0.8 38.66 541.48 41.93 2111.76 24.39
10 8.3 0.8 7.6 2 0.8 22.28 443.39 17.84 1840.05 8.89
11 9.3 0.8 8.4 1.2 0.8 10.17 348.01 5.14 1618.23 1.92
12 11.5 0.8 9.2 0.4 0.8 2.32 246.33 0.43 1416.40 0.07
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

191
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 9.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 9.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.35 1/6
0.64 6.60 233.65 62.31 1.01 0.0 0.0 63.32 7.86 0.08 Safe Safe
0.51 6.20 205.28 54.74 1.08 0.0 0.0 55.82 10.67 0.06 Safe Safe
0.53 5.80 195.12 52.03 1.15 0.0 0.0 53.18 8.31 0.08 Safe Safe
0.45 5.40 171.96 45.86 1.23 0.0 0.0 47.09 9.89 0.07 Safe Safe
0.35 5.00 148.89 39.70 1.33 0.0 0.0 41.04 12.85 0.05 Safe Safe
0.27 4.60 127.61 34.03 1.45 0.0 0.0 35.48 17.38 0.04 Safe Safe
0.20 4.20 107.76 28.74 1.59 0.0 0.0 30.32 24.77 0.03 Safe Safe
0.13 3.80 88.57 23.62 1.75 0.0 0.0 25.37 43.90 0.02 Safe Safe
0.08 3.40 70.83 18.89 1.96 0.0 0.0 20.85 86.58 0.01 Safe Safe
0.04 3.00 53.94 14.38 2.22 0.0 0.0 16.61 207.01 0.00 Safe Safe
0.01 2.60 37.54 10.01 2.56 0.0 0.0 12.57 842.83 0.00 Safe Safe
0.00 2.20 21.43 5.71 3.03 0.0 0.0 8.74 19918.09 0.00 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

192
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 9.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 9.6 m
R0 MPL/RE/23/PW-1 19-Apr-23

Seismic Analysis
Elevation Vertical
Length of Strap from Elevation spacing
Strap Strap ,L spacing base, hi from Top, of Strap,
layers (m) ,m ,m hj ,m Svj ,m Rhj Rvj Mo Mrj PI=Wa*Am
1 8.3 0.4 0.4 9.2 0.8 532.78 1738.19 2398.76 6800.13 111.71
2 8.8 0.8 1.2 8.4 0.8 447.42 1702.10 1844.47 7024.58 93.13
3 7 0.8 2 7.6 0.8 369.49 1241.94 1382.78 4052.79 76.23
4 6.8 0.8 2.8 6.8 0.8 299.00 1097.66 1005.24 3454.59 61.03
5 6.8 0.8 3.6 6 0.8 235.94 988.86 703.42 3084.67 47.51
6 6.8 0.8 4.4 5.2 0.8 180.32 880.06 468.85 2714.75 35.69
7 6.8 0.8 5.2 4.4 0.8 132.13 771.26 293.08 2344.83 25.55
8 7.3 0.8 6 3.6 0.8 91.38 711.17 167.68 2276.02 17.10
9 7.8 0.8 6.8 2.8 0.8 58.06 635.08 84.19 2111.76 10.35
10 8.3 0.8 7.6 2 0.8 32.18 542.99 34.15 1840.05 5.28
11 9.3 0.8 8.4 1.2 0.8 13.73 459.61 9.13 1618.23 1.90
12 11.5 0.8 9.2 0.4 0.8 2.72 384.33 0.66 1416.40 0.21
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

193
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 9.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 9.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Rsvj Check for Check for
Mr/Mo
Ecentricit (for overturni eccentrici
Dj svj Tpj Tmd Tj (Overturi e/L
y, ej Internal ngMr/Mo tye / L ≤
ning)
Sliding) ≥ 1.125 1/3
1.62 6.60 343.22 91.53 14.48 106.0 853.0 2.83 0.19 Safe Safe
1.36 6.20 279.64 74.57 12.13 86.7 835.3 3.81 0.15 Safe Safe
1.35 5.80 288.84 77.02 7.16 84.2 609.5 2.93 0.19 Safe Safe
1.17 5.40 245.95 65.59 5.08 70.7 538.7 3.44 0.17 Safe Safe
0.99 5.00 205.32 54.75 3.60 58.4 485.3 4.39 0.15 Safe Safe
0.85 4.60 172.42 45.98 2.44 48.4 431.9 5.79 0.12 Safe Safe
0.74 4.20 144.96 38.66 1.56 40.2 378.5 8.00 0.11 Safe Safe
0.69 3.80 119.94 31.98 1.05 33.0 349.0 13.57 0.09 Safe Safe
0.71 3.40 99.46 26.52 0.64 27.2 311.7 25.08 0.09 Safe Safe
0.82 3.00 81.63 21.77 0.33 22.1 266.5 53.88 0.10 Safe Safe
1.15 2.60 65.64 17.50 0.14 17.6 225.6 177.33 0.12 Safe Safe
2.07 2.20 52.17 13.91 0.02 13.9 188.6 2139.91 0.18 Safe Safe
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

194
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 9.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 9.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Rupture check for Reinforcement FOS REQ = 1.000

MAX Tj
Strap CASE Width of Force per Width of FOS FOS
hj T avialable
Type A,B,C & Panel strip Strip Status Status
SEISMIC
9.20 75 KN 36.68 109.88 2.00 36.63 0.09 1.002 Safe
8.40 100 KN 49.83 96.95 2.00 48.47 0.09 1.028 Safe
7.60 100 KN 49.83 94.43 2.00 47.22 0.09 1.055 Safe
6.80 100 KN 49.83 84.34 2.00 42.17 0.09 1.182 Safe
6.00 85 KN 41.96 74.18 2.00 37.09 0.09 1.131 Safe
5.20 75 KN 36.68 64.98 2.00 32.49 0.09 1.129 Safe
4.40 60 KN 29.34 56.57 2.00 28.29 0.09 1.037 Safe
3.60 50 KN 24.46 48.49 2.00 24.24 0.09 1.009 Safe
2.80 50 KN 24.46 41.30 2.00 20.65 0.09 1.184 Safe
2.00 40 KN 19.56 34.70 2.00 17.35 0.09 1.127 Safe
1.20 30 KN 14.67 28.52 2.00 14.26 0.09 1.029 Safe
0.40 30 KN 14.67 22.72 2.00 11.36 0.09 1.292 Safe
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -

195
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 9.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 9.6 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check For Internal Sliding
Strap
length Load case A Load case B Seismic Fos>=1.3 Fos>=1.3 Fos>=1.125
Rhj Rvj Rsvj FOS Rhj Rvj Rsvj FOS FOS Case A Case B Seismic
8.3 595.3 2756.7 1352.8 2.272 595.3 1638.6 804.1 1.351 1.601 Safe Safe Safe
8.8 510.0 2711.5 1330.7 2.609 510.0 1596.5 783.5 1.536 1.867 Safe Safe Safe
7.0 431.0 1988.9 976.1 2.265 431.0 1157.9 568.3 1.318 1.650 Safe Safe Safe
6.8 358.4 1768.9 868.1 2.422 358.4 1016.1 498.6 1.391 1.802 Safe Safe Safe
6.8 292.3 1605.7 788.0 2.696 292.3 907.3 445.2 1.523 2.057 Safe Safe Safe
6.8 232.5 1442.5 707.9 3.045 232.5 798.5 391.8 1.685 2.395 Safe Safe Safe
6.8 179.1 1279.3 627.8 3.505 179.1 689.7 338.4 1.889 2.864 Safe Safe Safe
7.3 132.2 1198.1 588.0 4.449 132.2 623.6 306.0 2.316 3.819 Safe Safe Safe
7.8 91.6 1093.0 536.4 5.857 91.6 541.5 265.7 2.901 5.368 Safe Safe Safe
8.3 57.4 963.9 473.0 8.238 57.4 443.4 217.6 3.789 8.280 Safe Safe Safe
9.3 29.7 856.8 420.5 14.180 29.7 348.0 170.8 5.760 16.425 Safe Safe Safe
11.5 8.3 783.5 384.5 46.415 8.3 246.3 120.9 14.593 69.375 Safe Safe Safe
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -

196
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 9.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 9.6 m
R0 MPL/RE/23/PW-1 19-Apr-23

Pull out or Adherence of Reinforcement check

(Pj) = Perimeter of jth layer total horizontal width of Strap of top and bottom faces = 0.180 m

Elevation Vertical Cofficient

Elevation Effective
from spacing Strap of
from Top, length of Case A Tj Puj FOS ≥ 1
base, hi of Strap, length Friction.
hj ,m Strap
,m Svj ,m m
9.2 0.4 0.8 8.3 8.07 109.88 0.491 487.10 4.433
8.4 1.2 0.8 8.8 8.11 96.95 0.491 299.82 3.093
7.6 2 0.8 7.0 5.85 94.43 0.491 197.11 2.087
6.8 2.8 0.8 6.8 5.18 84.34 0.491 157.88 1.872
6 3.6 0.8 6.8 4.72 74.18 0.491 128.41 1.731
5.2 4.4 0.8 6.8 4.26 64.98 0.491 101.96 1.569
4.4 5.2 0.8 6.8 3.80 56.57 0.491 78.52 1.388
3.6 6 0.8 7.3 3.84 48.49 0.491 66.79 1.378
2.8 6.8 0.8 7.8 3.87 41.30 0.491 54.82 1.327
2 7.6 0.8 8.3 3.91 34.70 0.491 42.60 1.228
1.2 8.4 0.8 9.3 4.45 28.52 0.491 33.95 1.190
0.4 9.2 0.8 11.5 6.19 22.72 0.491 27.02 1.189
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -

197
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 9.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 9.6 m
R0 MPL/RE/23/PW-1 19-Apr-23

Pr
Seismic Pullout FoS nos of
Case B Tj Puj FOS Case C Tj Puj FOS Status
Tj Resistanc Pullout Strip/m
e
77.01 422.15 5.482 77.01 422.15 5.482 106.0 287.06 2.708 3 Safe
32.14 259.85 8.085 64.28 259.85 4.042 86.7 176.70 2.038 2 Safe
32.72 170.83 5.221 65.44 170.83 2.610 84.2 116.16 1.380 2 Safe
28.17 136.83 4.857 56.34 136.83 2.429 70.7 93.05 1.317 2 Safe
23.65 111.29 4.706 47.29 111.29 2.353 58.4 75.68 1.297 2 Safe
19.81 88.36 4.462 39.61 88.36 2.231 48.4 60.09 1.241 2 Safe
16.48 68.05 4.130 32.95 68.05 2.065 40.2 46.27 1.151 2 Safe
13.36 57.89 4.334 26.72 57.89 2.167 33.0 39.36 1.191 2 Safe
10.74 47.51 4.422 21.49 47.51 2.211 27.2 32.31 1.189 2 Safe
8.44 36.92 4.377 16.87 36.92 2.188 22.1 25.11 1.136 2 Safe
6.32 29.42 4.653 12.64 29.42 2.327 17.6 20.01 1.134 2 Safe
4.37 23.42 5.354 8.75 23.42 2.677 13.9 15.92 1.143 2 Safe
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

198
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 9.6 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 9.6 m
R0 MPL/RE/23/PW-1 19-Apr-23

From Bottom Layer DESIGN HT=

9.600 m

Elevation
Strap Strap No. of
Sr No from
Grade Length Connector
bottom

1 75 KN 8.3 0.4 3
2 100 KN 8.8 1.2 2
3 100 KN 7.0 2.0 2
4 100 KN 6.8 2.8 2
5 85 KN 6.8 3.6 2
6 75 KN 6.8 4.4 2
7 60 KN 6.8 5.2 2
8 50 KN 7.3 6.0 2
9 50 KN 7.8 6.8 2
10 40 KN 8.3 7.6 2
11 30 KN 9.3 8.4 2
12 30 KN 11.5 9.2 2
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -

199
12. CALCULATION FOR HEIGHT 10.4
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 10.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 10.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Wall Geometry
Height of facing H = 9.400 m
Soil Height (Earth crust) = 0.61 m
Embedment depth Dm = 1.00 m
Total height of the wall = 11.01 m
Design Height (H) = 10.400 m
Mechanical height (Hm) = 11.01 m
Minimum length of Reinforcement = 7.28 m (0.7*H)
Trail Length of Strap (L) = 7.28 m (Minimum Required)
Length of Strap (L) = 8.8 m
0

0
Dead load surcharge 2nd Tier + qd (Earth Crust) = 13.42 kPa
0 kPa
φ = 30.00 degree
δ = 20.00 degree
α 87.709 degree
β 0.00 degree
0

External stablity analysis (Static)

Length of Strap = 8.8 m
For reinforced soil:
Ka1 = (1-sinØ1)/(1+sinØ1)
0.333
Wall batter θ = 2.291 deg.

For retrained backfill soil:

Ka2 = (1-sinØ2)/(1+sinØ2)
0.333

Am = 0.23

ʎ = = 12.883088

α = 87.709
φ = 30.00
β = 0

KAE = 0.514 Considering Am>0

KAE 0.349 Considering Am=0

DKAE = 0.1654

Calculation of factored Horizontal load (Rh)

Type of Force Formula used P.F (ffs) Case A P.F (ffs) Case B P.F (ffs) Case C P.F (ffs) Seismic Units
P1- Earth pressure ½ x ka2 x γ2 x H2 x ffs 1.5 540.8 1.5 540.8 1.0 360.5 1.0 360.53 KN/m
P2- Earth pressure due ka2 x qL x H x ffs 1.5 124.80 1.5 124.80 0.0 0.00 0.50 41.60 KN/m
P3- Due to dead load ka2 x qd x H x ffs 1.5 69.78 1.5 69.78 1.0 46.52 1.00 46.52 KN/m
P4- Horizontal strip ffsx FL 1.5 0 1.5 0 1.0 0 0 0 KN/m
PIR 0.5 x am x g1 x H2 - - - - - - 1 247.25 KN/m
(50%)PAE 50% of (0.5 x KAE x g3 x H2) - - - - - - 1 89.47 KN/m
Rh-Total factored (P1+P2+P3+P4) for case 735.4 735.4 407.1 785.4 KN/m

Calculation of factored vertical loads (Rv)

201
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 10.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 10.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Calculation of factored vertical loads (Rv)
Type of Force Formula used P.F (ffs) Case A P.F (ffs) Case B P.F (ffs) Case C P.F (ffs) Seismic Units
V1-Self weight of γ1 x H x Lxffs 1.5 2745.6 1 1830.4 1.0 1830.4 1.0 1830.4 KN/m
V2- Due to live load qL x L x ffs 1.5 316.80 0 0.00 0.0 0.00 0.5 105.60 KN/m
V3- Due to dead load qd x L x ffs 1.5 177 1 118 1.0 118 1 118 KN/m
V4- Due to strip load ffsx SL 1.5 37.5 1 25.0 1.0 25.0 0 0.0 KN/m
RV-Total factored V1+V2+V3+V4 3277.0 1973.5 1973.5 2054.1 KN/m

Sliding along base

Formula used Case A Case B Case C Seismic Units
Sliding P1+P2+P3 Static And
735.4 735.4 407.1 785.4 KN/m
forces (P1+P2+P3+PIR +50 %
Resisting
force Rv* (tanØ'p/fms)+
1892.0 1139.4 1139.4 1185.9 KN/m
(Static)/ (c3*L/fms)
(Seismic)

Calculation of Disturbing moment (Md)

Moment Formula used Case A Case B Case C Units
Md1-Earth pressure P1 x H /3 1874.8 1874.8 1249.8 KN-m
Md2- Live Load P2 x H /2 648.96 648.96 0.00 KN-m
Md3- Dead load P3 x H /2 363 363 242 KN-m
Md4- Horziontal strip P4 x H 0.0 0.0 0.0 KN-m
Md-Total factored Md1+Md2+Md3+Md4 2886.6 2886.6 1491.8 KN-m

Calculation of overturning moment (Mo) Seismic

Moment Formula used Seismic Unit
MO1-Earth pressure P1 x H /3 1249.85 KN-m
Mo2- Live Load P2 x H /2 216.32 KN-m
Mo3- Due to horizontal P3 x H /2 241.92 KN-m
Mo4- Due to horizontal PIRx H/2 1285.7 KN-m
Mo5- Due to seismic 0.5x PAE x0.6x H 558.3 KN-m
Mo-Total factored Mo1+Mo2+Mo3+Mo4 3552.11 KN-m

Calculation of Resistingt moment (M r )

Moment Formula used Case A Case B Case C Seismic Units
Mr1-Reinforced fill V1 x L /2 12080.6 8053.8 8053.8 8053.8 KN-m
Mr2- Live Load V2 x Lc /2 1393.9 0.0 0.0 - KN-m
Mr3- Dead load V3 x Lc /2 779 520 520 519.6224 KN-m
Mr4- Vertical strip load V4 x d 37.5 25.0 25.0 - KN-m
Mr-Total factored Mr1+Mr2+Mr3+Mr4 14291.5 8598.4 8598.4 8573.4 KN-m

Summary Table: -1
Case Rv Rh Mr Md Mo MRBP e,(m) Md/Rv L/6 ,(m)
A 3277.0 735.4 14291.5 2886.6 2523.7 - 0.809 0.88 1.47
B 1973.5 735.4 8598.4 2886.6 2523.7 - 1.322 1.46 1.47
C 1973.5 407.1 8598.4 1491.8 1249.8 - 0.676 0.76 1.47
Seismic 2054.1 785.4 8573.4 - 3552.1 9038.0 1.73 - 2.93 L/3

202
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 10.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 10.4 m
R0 MPL/RE/23/PW-1 19-Apr-23

Bearing pressure (qref) Mayerhoff (Base

distribution
length is Used)
Bearing pressure Formula used Case A Case B Case C Seismic Unit
qref Rv x/(L-2e) 456.3 320.6 265.0 384.6 KN/m2
qult cfNc+qNq+0.5(L-2e)g3Ng 1976.8 1747.0 2036.2 1564.5 KN/m2
qsafe qult./fms+gf*dm 1432.0 1267.9 1474.4 1137.5 KN/m2

Factor of saftey table

Permisibl
Bearing Overturni e e< L/6
Case failure ng Sliding Ecentricity ,e m FOS
A 3.14 4.95 2.57 0.809 1.467 1.81
B 3.96 3.0 1.55 1.322 1.467 1.11
C 5.56 5.8 2.80 0.676 1.467 2.17
Seismic 4.07 2.4 1.5 1.729 2.933 1.70
Wall External stablity status

Parameter Case A Case B Case C Seismic Req. F.O.S

Bearing
Safe Safe Safe Safe 1.4
General Shearfailure
Overturning Safe Safe Safe Safe 1.2
Sliding Safe Safe Safe Safe 1.2
Ecentricity Safe Safe Safe Safe 1

203
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 10.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 10.4 m
R0 MPL/RE/23/PW-1 19-Apr-23

Internal stability analysis (Static)

A) Check for Rupture of reinforcement Q = 0.29

Case A
Elevation Vertical
Length of Strap Elevation
Strap from spacing
Strap ,L spacing from Top, Rhj Rvj Mdj Mrj Mo
layers base, hi of Strap,
(m) ,m hj ,m
,m Svj ,m
1 8.8 0.4 0.4 10.0 0.800 687.1 3133.9 2602.2 13789.4 2266.7 0.0
2 8.3 0.8 1.2 9.2 0.800 595.3 2756.7 2089.6 11440.2 1805.7 0.0
3 9.3 0.8 2.0 8.4 0.800 510.0 2865.6 1647.9 13325.1 1411.2 0.0
4 7.3 0.8 2.8 7.6 0.800 431.0 2074.1 1272.0 7570.6 1078.2 0.0
5 7.3 0.8 3.6 6.8 0.800 358.4 1898.9 956.6 6931.2 801.5 0.0
6 7.3 0.8 4.4 6.0 0.800 292.3 1723.7 696.8 6291.7 576.0 0.0
7 7.3 0.8 5.2 5.2 0.800 232.5 1548.5 487.3 5652.2 396.6 0.0
8 7.3 0.8 6.0 4.4 0.800 179.1 1373.3 323.1 5012.7 258.1 0.0
9 7.6 0.8 6.8 3.6 0.800 132.2 1247.4 199.0 4740.1 155.5 0.0
10 8.1 0.8 7.6 2.8 0.800 91.6 1135.1 109.9 4597.0 83.6 0.0
11 8.8 0.8 8.4 2.0 0.800 57.4 1021.9 50.8 4496.6 37.3 0.0
12 9.8 0.8 9.2 1.2 0.800 29.7 902.9 16.4 4424.1 11.5 0.0
13 12.1 0.8 10.0 0.4 0.800 8.3 824.4 1.6 4987.5 1.1 0.0
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

204
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 10.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 10.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.5 1/6
0.83 7.00 438.97 117.06 1.43 0.0 0.0 118.49 6.08 0.09 Safe Safe
0.76 6.60 406.35 108.36 1.52 0.0 0.0 109.88 6.34 0.09 Safe Safe
0.58 6.20 351.61 93.76 1.61 0.0 0.0 95.38 9.44 0.06 Safe Safe
0.61 5.80 341.51 91.07 1.72 0.0 0.0 92.79 7.02 0.08 Safe Safe
0.50 5.40 301.78 80.48 1.85 0.0 0.0 82.33 8.65 0.07 Safe Safe
0.40 5.00 265.54 70.81 2.00 0.0 0.0 72.81 10.92 0.06 Safe Safe
0.31 4.60 232.14 61.91 2.17 0.0 0.0 64.08 14.25 0.04 Safe Safe
0.24 4.20 201.09 53.62 2.38 0.0 0.0 56.01 19.42 0.03 Safe Safe
0.16 3.80 171.32 45.69 2.63 0.0 0.0 48.32 30.48 0.02 Safe Safe
0.10 3.40 143.56 38.28 2.94 0.0 0.0 41.22 54.97 0.01 Safe Safe
0.05 3.00 117.46 31.32 3.33 0.0 0.0 34.65 120.44 0.01 Safe Safe
0.02 2.60 92.47 24.66 3.85 0.0 0.0 28.51 384.03 0.00 Safe Safe
0.00 2.20 68.15 18.17 4.55 0.0 0.0 22.72 4675.74 0.00 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

205
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 10.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 10.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Case B
Elevation Vertical
Length of Strap Elevation
Strap from spacing
Strap ,L spacing from Top, Rhj Rvj Mdj Mrj Mo
layers base, hi of Strap,
(m) ,m hj ,m
,m Svj ,m
1 8.8 0.4 0.4 10 0.8 687.10 1878.10 2602.17 8263.6 2266.67
2 8.3 0.8 1.2 9.2 0.8 595.33 1638.59 2089.62 6800.1 1805.65
3 9.3 0.8 2 8.4 0.8 509.96 1687.21 1647.93 7845.5 1411.20
4 7.3 0.8 2.8 7.6 0.8 431.00 1207.57 1271.97 4407.6 1078.19
5 7.3 0.8 3.6 6.8 0.8 358.43 1090.77 956.63 3981.3 801.49
6 7.3 0.8 4.4 6 0.8 292.26 973.97 696.78 3555.0 576.00
7 7.3 0.8 5.2 5.2 0.8 232.49 857.17 487.31 3128.7 396.59
8 7.3 0.8 6 4.4 0.8 179.12 740.37 323.09 2702.3 258.13
9 7.6 0.8 6.8 3.6 0.8 132.16 649.19 199.00 2466.9 155.52
10 8.1 0.8 7.6 2.8 0.8 91.59 562.30 109.93 2277.3 83.63
11 8.8 0.8 8.4 2 0.8 57.42 470.10 50.75 2068.4 37.33
12 9.8 0.8 9.2 1.2 0.8 29.65 366.72 16.35 1796.9 11.52
13 12.1 0.8 10 0.4 0.8 8.28 259.18 1.60 1568.1 1.07
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

206
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 10.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 10.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.35 1/6
1.39 7.00 311.51 83.07 0.95 0.0 0.0 84.02 3.646 0.157 Safe Safe
1.28 6.60 285.00 76.00 1.01 0.0 0.0 77.01 3.766 0.154 Safe Safe
0.98 6.20 229.66 61.24 1.08 0.0 0.0 62.32 5.559 0.105 Safe Safe
1.05 5.80 232.52 62.01 1.15 0.0 0.0 63.16 4.088 0.144 Safe Safe
0.88 5.40 196.68 52.45 1.23 0.0 0.0 53.68 4.967 0.120 Safe Safe
0.72 5.00 165.95 44.25 1.33 0.0 0.0 45.59 6.172 0.098 Safe Safe
0.57 4.60 139.08 37.09 1.45 0.0 0.0 38.54 7.889 0.078 Safe Safe
0.44 4.20 115.19 30.72 1.59 0.0 0.0 32.31 10.469 0.060 Safe Safe
0.31 3.80 92.92 24.78 1.75 0.0 0.0 26.53 15.862 0.040 Safe Safe
0.20 3.40 72.94 19.45 1.96 0.0 0.0 21.41 27.232 0.024 Safe Safe
0.11 3.00 54.76 14.60 2.22 0.0 0.0 16.83 55.404 0.012 Safe Safe
0.04 2.60 37.76 10.07 2.56 0.0 0.0 12.63 155.982 0.005 Safe Safe
0.01 2.20 21.44 5.72 3.03 0.0 0.0 8.75 1470.048 0.001 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

207
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 10.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 10.4 m
R0 MPL/RE/23/PW-1 19-Apr-23

Case C
Elevation Vertical
Length of Strap from Elevation spacing
Strap Strap ,L spacing base, hi from Top, of Strap,
layers (m) ,m ,m hj ,m Svj ,m Rhj Rvj Mdj Mrj Mo
1 8.8 0.4 0.4 10 0.8 378.07 1878.10 1334.78 8263.62 1111.11
2 8.3 0.8 1.2 9.2 0.8 323.29 1638.59 1054.52 6800.13 865.21
3 9.3 0.8 2 8.4 0.8 272.78 1687.21 816.38 7845.51 658.56
4 7.3 0.8 2.8 7.6 0.8 226.53 1207.57 616.94 4407.62 487.75
5 7.3 0.8 3.6 6.8 0.8 184.55 1090.77 452.79 3981.30 349.37
6 7.3 0.8 4.4 6 0.8 146.84 973.97 320.52 3554.98 240.00
7 7.3 0.8 5.2 5.2 0.8 113.39 857.17 216.71 3128.66 156.23
8 7.3 0.8 6 4.4 0.8 84.22 740.37 137.95 2702.34 94.65
9 7.6 0.8 6.8 3.6 0.8 59.30 649.19 80.83 2466.93 51.84
10 8.1 0.8 7.6 2.8 0.8 38.66 562.30 41.93 2277.32 24.39
11 8.8 0.8 8.4 2 0.8 22.28 470.10 17.84 2068.42 8.89
12 9.8 0.8 9.2 1.2 0.8 10.17 366.72 5.14 1796.91 1.92
13 12.1 0.8 10 0.4 0.8 2.32 259.18 0.43 1568.05 0.07
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

208
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 10.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 10.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.35 1/6
0.71 7.00 254.53 67.88 0.95 0.0 0.0 68.83 7.44 0.08 Safe Safe
0.64 6.60 233.65 62.31 1.01 0.0 0.0 63.32 7.86 0.08 Safe Safe
0.48 6.20 202.49 54.00 1.08 0.0 0.0 55.07 11.91 0.05 Safe Safe
0.51 5.80 192.34 51.29 1.15 0.0 0.0 52.44 9.04 0.07 Safe Safe
0.42 5.40 168.59 44.96 1.23 0.0 0.0 46.19 11.40 0.06 Safe Safe
0.33 5.00 146.64 39.10 1.33 0.0 0.0 40.44 14.81 0.05 Safe Safe
0.25 4.60 126.16 33.64 1.45 0.0 0.0 35.09 20.03 0.03 Safe Safe
0.19 4.20 106.88 28.50 1.59 0.0 0.0 30.09 28.55 0.03 Safe Safe
0.12 3.80 88.31 23.55 1.75 0.0 0.0 25.30 47.59 0.02 Safe Safe
0.07 3.40 70.72 18.86 1.96 0.0 0.0 20.82 93.37 0.01 Safe Safe
0.04 3.00 53.88 14.37 2.22 0.0 0.0 16.59 232.70 0.00 Safe Safe
0.01 2.60 37.53 10.01 2.56 0.0 0.0 12.57 935.89 0.00 Safe Safe
0.00 2.20 21.43 5.71 3.03 0.0 0.0 8.74 22050.72 0.00 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

209
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 10.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 10.4 m
R0 MPL/RE/23/PW-1 19-Apr-23

Seismic Analysis
Elevation Vertical
Length of Strap from Elevation spacing
Strap Strap ,L spacing base, hi from Top, of Strap,
layers (m) ,m ,m hj ,m Svj ,m Rhj Rvj Mo Mrj PI=Wa*Am
1 8.8 0.4 0.4 10 0.8 625.58 1983.70 3060.78 8263.62 131.98
2 8.3 0.8 1.2 9.2 0.8 532.78 1738.19 2404.40 6800.13 111.71
3 9.3 0.8 2 8.4 0.8 447.42 1798.81 1849.17 7845.51 93.13
4 7.3 0.8 2.8 7.6 0.8 369.49 1295.17 1386.63 4407.62 76.23
5 7.3 0.8 3.6 6.8 0.8 299.00 1178.37 1008.33 3981.30 61.03
6 7.3 0.8 4.4 6 0.8 235.94 1061.57 705.82 3554.98 47.51
7 7.3 0.8 5.2 5.2 0.8 180.32 944.77 470.65 3128.66 35.69
8 7.3 0.8 6 4.4 0.8 132.13 827.97 294.37 2702.34 25.55
9 7.6 0.8 6.8 3.6 0.8 91.38 740.39 168.54 2466.93 17.10
10 8.1 0.8 7.6 2.8 0.8 58.06 659.50 84.71 2277.32 10.35
11 8.8 0.8 8.4 2 0.8 32.18 575.70 34.42 2068.42 5.28
12 9.8 0.8 9.2 1.2 0.8 13.73 484.32 9.22 1796.91 1.90
13 12.1 0.8 10 0.4 0.8 2.72 404.38 0.67 1568.05 0.21
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

210
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 10.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 10.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Rsvj Check for Check for
Mr/Mo
Ecentricit (for overturni eccentrici
Dj svj Tpj Tmd Tj (Overturi e/L
y, ej Internal ngMr/Mo tye / L ≤
ning)
Sliding) ≥ 1.125 1/3
1.78 7.00 378.16 100.84 16.09 116.9 973.5 2.70 0.20 Safe Safe
1.62 6.60 343.66 91.64 12.09 103.7 853.0 2.83 0.20 Safe Safe
1.32 6.20 269.81 71.95 10.79 82.7 882.8 4.24 0.14 Safe Safe
1.32 5.80 277.63 74.04 6.17 80.2 635.6 3.18 0.18 Safe Safe
1.13 5.40 233.53 62.27 4.53 66.8 578.3 3.95 0.15 Safe Safe
0.97 5.00 197.76 52.74 3.22 56.0 521.0 5.04 0.13 Safe Safe
0.84 4.60 167.90 44.77 2.18 47.0 463.6 6.65 0.11 Safe Safe
0.74 4.20 142.35 37.96 1.39 39.4 406.3 9.18 0.10 Safe Safe
0.70 3.80 119.25 31.80 0.89 32.7 363.3 14.64 0.09 Safe Safe
0.73 3.40 99.18 26.45 0.55 27.0 323.6 26.88 0.09 Safe Safe
0.87 3.00 81.47 21.73 0.30 22.0 282.5 60.10 0.10 Safe Safe
1.21 2.60 65.60 17.49 0.12 17.6 237.7 194.86 0.12 Safe Safe
2.17 2.20 52.17 13.91 0.02 13.9 198.4 2331.46 0.18 Safe Safe
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

211
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 10.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 10.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Rupture check for Reinforcement FOS REQ = 1.000

MAX Tj
Strap CASE Width of Force per Width of FOS FOS
hj T avialable
Type A,B,C & Panel strip Strip Status Status
SEISMIC
10.00 85 KN 41.96 118.49 2.00 39.50 0.09 1.062 Safe
9.20 75 KN 36.68 109.88 2.00 36.63 0.09 1.002 Safe
8.40 100 KN 49.83 95.38 2.00 47.69 0.09 1.045 Safe
7.60 100 KN 49.83 92.79 2.00 46.40 0.09 1.074 Safe
6.80 85 KN 41.96 82.33 2.00 41.16 0.09 1.019 Safe
6.00 75 KN 36.68 72.81 2.00 36.40 0.09 1.008 Safe
5.20 75 KN 36.68 64.08 2.00 32.04 0.09 1.145 Safe
4.40 60 KN 29.34 56.01 2.00 28.00 0.09 1.048 Safe
3.60 50 KN 24.46 48.32 2.00 24.16 0.09 1.012 Safe
2.80 50 KN 24.46 41.22 2.00 20.61 0.09 1.186 Safe
2.00 40 KN 19.56 34.65 2.00 17.33 0.09 1.129 Safe
1.20 30 KN 14.67 28.51 2.00 14.25 0.09 1.029 Safe
0.40 30 KN 14.67 22.72 2.00 11.36 0.09 1.292 Safe
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -

212
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 10.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 10.4 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check For Internal Sliding
Strap
length Load case A Load case B Seismic Fos>=1.3 Fos>=1.3 Fos>=1.125
Rhj Rvj Rsvj FOS Rhj Rvj Rsvj FOS FOS Case A Case B Seismic
8.8 687.1 3133.9 1538.0 2.238 687.1 1878.1 921.7 1.341 1.556 Safe Safe Safe
8.3 595.3 2756.7 1352.8 2.272 595.3 1638.6 804.1 1.351 1.601 Safe Safe Safe
9.3 510.0 2865.6 1406.3 2.758 510.0 1687.2 828.0 1.624 1.973 Safe Safe Safe
7.3 431.0 2074.1 1017.9 2.362 431.0 1207.6 592.6 1.375 1.720 Safe Safe Safe
7.3 358.4 1898.9 931.9 2.600 358.4 1090.8 535.3 1.493 1.934 Safe Safe Safe
7.3 292.3 1723.7 845.9 2.894 292.3 974.0 478.0 1.635 2.208 Safe Safe Safe
7.3 232.5 1548.5 759.9 3.269 232.5 857.2 420.7 1.809 2.571 Safe Safe Safe
7.3 179.1 1373.3 674.0 3.763 179.1 740.4 363.3 2.028 3.075 Safe Safe Safe
7.6 132.2 1247.4 612.2 4.632 132.2 649.2 318.6 2.411 3.976 Safe Safe Safe
8.1 91.6 1135.1 557.0 6.082 91.6 562.3 275.9 3.013 5.574 Safe Safe Safe
8.8 57.4 1021.9 501.5 8.734 57.4 470.1 230.7 4.018 8.779 Safe Safe Safe
9.8 29.7 902.9 443.1 14.943 29.7 366.7 180.0 6.069 17.308 Safe Safe Safe
12.1 8.3 824.4 404.6 48.836 8.3 259.2 127.2 15.354 72.995 Safe Safe Safe
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -

213
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 10.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 10.4 m
R0 MPL/RE/23/PW-1 19-Apr-23

Pull out or Adherence of Reinforcement check

(Pj) = Perimeter of jth layer total horizontal width of Strap of top and bottom faces = 0.180 m

Elevation Vertical Cofficient

Elevation Effective
from spacing Strap of
from Top, length of Case A Tj Puj FOS ≥ 1
base, hi of Strap, length Friction.
hj ,m Strap
,m Svj ,m m
10 0.4 0.8 8.8 8.57 118.49 0.491 559.20 4.720
9.2 1.2 0.8 8.3 7.61 109.88 0.491 459.21 4.179
8.4 2 0.8 9.3 8.15 95.38 0.491 301.23 3.158
7.6 2.8 0.8 7.3 5.68 92.79 0.491 191.65 2.065
6.8 3.6 0.8 7.3 5.22 82.33 0.491 159.04 1.932
6 4.4 0.8 7.3 4.76 72.81 0.491 129.45 1.778
5.2 5.2 0.8 7.3 4.30 64.08 0.491 102.87 1.605
4.4 6 0.8 7.3 3.84 56.01 0.491 79.30 1.416
3.6 6.8 0.8 7.6 3.67 48.32 0.491 63.97 1.324
2.8 7.6 0.8 8.1 3.71 41.22 0.491 52.53 1.274
2 8.4 0.8 8.8 3.95 34.65 0.491 43.02 1.241
1.2 9.2 0.8 9.8 4.49 28.51 0.491 34.24 1.201
0.4 10 0.8 12.1 6.33 22.72 0.491 27.62 1.216
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -

214
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 10.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 10.4 m
R0 MPL/RE/23/PW-1 19-Apr-23

Pr
Seismic Pullout FoS nos of
Case B Tj Puj FOS Case C Tj Puj FOS Status
Tj Resistanc Pullout Strip/m
e
84.02 484.64 5.768 84.02 484.64 5.768 116.9 329.56 2.818 3 Safe
25.67 397.99 15.504 77.01 397.99 5.168 103.7 270.63 2.609 3 Safe
31.16 261.07 8.379 62.32 261.07 4.189 82.7 177.53 2.146 2 Safe
31.58 166.10 5.260 63.16 166.10 2.630 80.2 112.95 1.408 2 Safe
26.84 137.84 5.135 53.68 137.84 2.568 66.8 93.73 1.403 2 Safe
22.79 112.19 4.922 45.59 112.19 2.461 56.0 76.29 1.363 2 Safe
19.27 89.16 4.627 38.54 89.16 2.313 47.0 60.63 1.291 2 Safe
16.15 68.73 4.255 32.31 68.73 2.128 39.4 46.74 1.188 2 Safe
13.27 55.44 4.180 26.53 55.44 2.090 32.7 37.70 1.153 2 Safe
10.71 45.53 4.253 21.41 45.53 2.126 27.0 30.96 1.147 2 Safe
8.41 37.28 4.431 16.83 37.28 2.216 22.0 25.35 1.151 2 Safe
6.32 29.67 4.697 12.63 29.67 2.349 17.6 20.18 1.145 2 Safe
4.37 23.94 5.473 8.75 23.94 2.737 13.9 16.28 1.169 2 Safe
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

215
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 10.4 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 10.4 m
R0 MPL/RE/23/PW-1 19-Apr-23

From Bottom Layer DESIGN HT=

10.400 m

Elevation
Strap Strap No. of
Sr No from
Grade Length Connector
bottom

1 85 KN 8.8 0.4 3
2 75 KN 8.3 1.2 3
3 100 KN 9.3 2.0 2
4 100 KN 7.3 2.8 2
5 85 KN 7.3 3.6 2
6 75 KN 7.3 4.4 2
7 75 KN 7.3 5.2 2
8 60 KN 7.3 6.0 2
9 50 KN 7.6 6.8 2
10 50 KN 8.1 7.6 2
11 40 KN 8.8 8.4 2
12 30 KN 9.8 9.2 2
13 30 KN 12.1 10.0 2
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -

216
13. CALCULATION FOR HEIGHT 11.2
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 11.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 11.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Wall Geometry
Height of facing H = 10.200 m
Soil Height (Earth crust) = 0.61 m
Embedment depth Dm = 1.00 m
Total height of the wall = 11.81 m
Design Height (H) = 11.200 m
Mechanical height (Hm) = 11.81 m
Minimum length of Reinforcement = 7.84 m (0.7*H)
Trail Length of Strap (L) = 7.84 m (Minimum Required)
Length of Strap (L) = 9.4 m
0

0
Dead load surcharge 2nd Tier + qd (Earth Crust) = 13.42 kPa
0 kPa
φ = 30.00 degree
δ = 20.00 degree
α 87.709 degree
β 0.00 degree
0

External stablity analysis (Static)

Length of Strap = 9.4 m
For reinforced soil:
Ka1 = (1-sinØ1)/(1+sinØ1)
0.333
Wall batter θ = 2.291 deg.

For retrained backfill soil:

Ka2 = (1-sinØ2)/(1+sinØ2)
0.333

Am = 0.23

ʎ = = 12.883088

α = 87.709
φ = 30.00
β = 0

KAE = 0.514 Considering Am>0

KAE 0.349 Considering Am=0

DKAE = 0.1654

Calculation of factored Horizontal load (Rh)

Type of Force Formula used P.F (ffs) Case A P.F (ffs) Case B P.F (ffs) Case C P.F (ffs) Seismic Units
P1- Earth pressure ½ x ka2 x γ2 x H2 x ffs 1.5 627.2 1.5 627.2 1.0 418.1 1.0 418.13 KN/m
P2- Earth pressure due ka2 x qL x H x ffs 1.5 134.40 1.5 134.40 0.0 0.00 0.50 44.80 KN/m
P3- Due to dead load ka2 x qd x H x ffs 1.5 75.15 1.5 75.15 1.0 50.10 1.00 50.10 KN/m
P4- Horizontal strip ffsx FL 1.5 0 1.5 0 1.0 0 0 0 KN/m
PIR 0.5 x am x g1 x H2 - - - - - - 1 286.76 KN/m
(50%)PAE 50% of (0.5 x KAE x g3 x H2) - - - - - - 1 103.77 KN/m
Rh-Total factored (P1+P2+P3+P4) for case 836.8 836.8 468.2 903.6 KN/m

Calculation of factored vertical loads (Rv)

218
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 11.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 11.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Calculation of factored vertical loads (Rv)
Type of Force Formula used P.F (ffs) Case A P.F (ffs) Case B P.F (ffs) Case C P.F (ffs) Seismic Units
V1-Self weight of γ1 x H x Lxffs 1.5 3158.4 1 2105.6 1.0 2105.6 1.0 2105.6 KN/m
V2- Due to live load qL x L x ffs 1.5 338.40 0 0.00 0.0 0.00 0.5 112.80 KN/m
V3- Due to dead load qd x L x ffs 1.5 189 1 126 1.0 126 1 126 KN/m
V4- Due to strip load ffsx SL 1.5 37.5 1 25.0 1.0 25.0 0 0.0 KN/m
RV-Total factored V1+V2+V3+V4 3723.5 2256.7 2256.7 2344.5 KN/m

Sliding along base

Formula used Case A Case B Case C Seismic Units
Sliding P1+P2+P3 Static And
836.8 836.8 468.2 903.6 KN/m
forces (P1+P2+P3+PIR +50 %
Resisting
force Rv* (tanØ'p/fms)+
2149.8 1302.9 1302.9 1353.6 KN/m
(Static)/ (c3*L/fms)
(Seismic)

Calculation of Disturbing moment (Md)

Moment Formula used Case A Case B Case C Units
Md1-Earth pressure P1 x H /3 2341.5 2341.5 1561.0 KN-m
Md2- Live Load P2 x H /2 752.64 752.64 0.00 KN-m
Md3- Dead load P3 x H /2 421 421 281 KN-m
Md4- Horziontal strip P4 x H 0.0 0.0 0.0 KN-m
Md-Total factored Md1+Md2+Md3+Md4 3515.0 3515.0 1841.6 KN-m

Calculation of overturning moment (Mo) Seismic

Moment Formula used Seismic Unit
MO1-Earth pressure P1 x H /3 1561.03 KN-m
Mo2- Live Load P2 x H /2 250.88 KN-m
Mo3- Due to horizontal P3 x H /2 280.57 KN-m
Mo4- Due to horizontal PIRx H/2 1605.8 KN-m
Mo5- Due to seismic 0.5x PAE x0.6x H 697.3 KN-m
Mo-Total factored Mo1+Mo2+Mo3+Mo4 4395.62 KN-m

Calculation of Resistingt moment (M r )

Moment Formula used Case A Case B Case C Seismic Units
Mr1-Reinforced fill V1 x L /2 14844.5 9896.3 9896.3 9896.3 KN-m
Mr2- Live Load V2 x Lc /2 1590.5 0.0 0.0 - KN-m
Mr3- Dead load V3 x Lc /2 889 593 593 592.8956 KN-m
Mr4- Vertical strip load V4 x d 37.5 25.0 25.0 - KN-m
Mr-Total factored Mr1+Mr2+Mr3+Mr4 17361.8 10514.2 10514.2 10489.2 KN-m

Summary Table: -1
Case Rv Rh Mr Md Mo MRBP e,(m) Md/Rv L/6 ,(m)
A 3723.5 836.8 17361.8 3515.0 3094.2 - 0.868 0.94 1.57
B 2256.7 836.8 10514.2 3515.0 3094.2 - 1.412 1.56 1.57
C 2256.7 468.2 10514.2 1841.6 1561.0 - 0.733 0.82 1.57
Seismic 2344.5 903.6 10489.2 - 4395.6 11019.4 1.87 - 3.13 L/3

219
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 11.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 11.2 m
R0 MPL/RE/23/PW-1 19-Apr-23

Bearing pressure (qref) Mayerhoff (Base

distribution
length is Used)
Bearing pressure Formula used Case A Case B Case C Seismic Unit
qref Rv x/(L-2e) 485.9 343.2 284.4 414.9 KN/m2
qult cfNc+qNq+0.5(L-2e)g3Ng 2084.6 1841.0 2145.3 1633.7 KN/m2
qsafe qult./fms+gf*dm 1509.0 1335.0 1552.4 1186.9 KN/m2

Factor of saftey table

Permisibl
Bearing Overturni e e< L/6
Case failure ng Sliding Ecentricity ,e m FOS
A 3.11 4.94 2.57 0.868 1.567 1.80
B 3.89 3.0 1.56 1.412 1.567 1.11
C 5.46 5.7 2.78 0.733 1.567 2.14
Seismic 3.94 2.4 1.5 1.875 3.133 1.67
Wall External stablity status

Parameter Case A Case B Case C Seismic Req. F.O.S

Bearing
Safe Safe Safe Safe 1.4
General Shearfailure
Overturning Safe Safe Safe Safe 1.2
Sliding Safe Safe Safe Safe 1.2
Ecentricity Safe Safe Safe Safe 1

220
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 11.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 11.2 m
R0 MPL/RE/23/PW-1 19-Apr-23

Internal stability analysis (Static)

A) Check for Rupture of reinforcement Q = 0.29

Case A
Elevation Vertical
Length of Strap Elevation
Strap from spacing
Strap ,L spacing from Top, Rhj Rvj Mdj Mrj Mo
layers base, hi of Strap,
(m) ,m hj ,m
,m Svj ,m
1 9.4 0.4 0.4 10.8 0.800 785.3 3573.2 3190.7 16794.1 2799.4 0.0
2 8.9 0.8 1.2 10.0 0.800 687.1 3169.6 2602.2 14104.5 2266.7 0.0
3 8.1 0.8 2.0 9.2 0.800 595.3 2690.3 2089.6 10895.5 1805.7 0.0
4 8.9 0.8 2.8 8.4 0.800 510.0 2742.4 1647.9 12203.5 1411.2 0.0
5 7.9 0.8 3.6 7.6 0.800 431.0 2244.6 1272.0 8866.3 1078.2 0.0
6 7.9 0.8 4.4 6.8 0.800 358.4 2055.0 956.6 8117.4 801.5 0.0
7 7.9 0.8 5.2 6.0 0.800 292.3 1865.4 696.8 7368.4 576.0 0.0
8 7.9 0.8 6.0 5.2 0.800 232.5 1675.8 487.3 6619.5 396.6 0.0
9 7.9 0.8 6.8 4.4 0.800 179.1 1486.2 323.1 5870.6 258.1 0.0
10 8.1 0.8 7.6 3.6 0.800 132.2 1329.5 199.0 5384.3 155.5 0.0
11 8.6 0.8 8.4 2.8 0.800 91.6 1205.1 109.9 5182.0 83.6 0.0
12 9.4 0.8 9.2 2.0 0.800 57.4 1091.6 50.8 5130.6 37.3 0.0
13 10.4 0.8 10.0 1.2 0.800 29.7 958.2 16.4 4982.4 11.5 0.0
14 12.4 0.8 10.8 0.4 0.800 8.3 844.8 1.6 5237.8 1.1 0.0
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

221
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 11.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 11.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.5 1/6
0.89 7.40 469.29 125.14 1.35 0.0 0.0 126.50 6.00 0.09 Safe Safe
0.82 7.00 436.70 116.45 1.43 0.0 0.0 117.88 6.22 0.09 Safe Safe
0.78 6.60 410.94 109.58 1.52 0.0 0.0 111.10 6.03 0.10 Safe Safe
0.60 6.20 356.24 95.00 1.61 0.0 0.0 96.61 8.65 0.07 Safe Safe
0.57 5.80 331.72 88.46 1.72 0.0 0.0 90.18 8.22 0.07 Safe Safe
0.47 5.40 294.88 78.64 1.85 0.0 0.0 80.49 10.13 0.06 Safe Safe
0.37 5.00 260.79 69.54 2.00 0.0 0.0 71.54 12.79 0.05 Safe Safe
0.29 4.60 228.99 61.06 2.17 0.0 0.0 63.24 16.69 0.04 Safe Safe
0.22 4.20 199.09 53.09 2.38 0.0 0.0 55.47 22.74 0.03 Safe Safe
0.15 3.80 170.43 45.45 2.63 0.0 0.0 48.08 34.62 0.02 Safe Safe
0.09 3.40 143.17 38.18 2.94 0.0 0.0 41.12 61.97 0.01 Safe Safe
0.05 3.00 117.29 31.28 3.33 0.0 0.0 34.61 137.43 0.00 Safe Safe
0.02 2.60 92.43 24.65 3.85 0.0 0.0 28.50 432.50 0.00 Safe Safe
0.00 2.20 68.15 18.17 4.55 0.0 0.0 22.72 4910.47 0.00 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

222
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 11.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 11.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Case B
Elevation Vertical
Length of Strap Elevation
Strap from spacing
Strap ,L spacing from Top, Rhj Rvj Mdj Mrj Mo
layers base, hi of Strap,
(m) ,m hj ,m
,m Svj ,m
1 9.4 0.4 0.4 10.8 0.8 785.27 2156.55 3190.69 10135.8 2799.36
2 8.9 0.8 1.2 10 0.8 687.10 1899.44 2602.17 8452.5 2266.67
3 8.1 0.8 2 9.2 0.8 595.33 1599.10 2089.62 6476.4 1805.65
4 8.9 0.8 2.8 8.4 0.8 509.96 1614.64 1647.93 7185.1 1411.20
5 7.9 0.8 3.6 7.6 0.8 431.00 1306.82 1271.97 5161.9 1078.19
6 7.9 0.8 4.4 6.8 0.8 358.43 1180.42 956.63 4662.7 801.49
7 7.9 0.8 5.2 6 0.8 292.26 1054.02 696.78 4163.4 576.00
8 7.9 0.8 6 5.2 0.8 232.49 927.62 487.31 3664.1 396.59
9 7.9 0.8 6.8 4.4 0.8 179.12 801.22 323.09 3164.8 258.13
10 8.1 0.8 7.6 3.6 0.8 132.16 691.90 199.00 2802.2 155.52
11 8.6 0.8 8.4 2.8 0.8 91.59 597.01 109.93 2567.2 83.63
12 9.4 0.8 9.2 2 0.8 57.42 502.15 50.75 2360.1 37.33
13 10.4 0.8 10 1.2 0.8 29.65 389.17 16.35 2023.7 11.52
14 12.4 0.8 10.8 0.4 0.8 8.28 265.61 1.60 1646.8 1.07
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

223
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 11.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 11.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.35 1/6
1.48 7.40 334.82 89.29 0.90 0.0 0.0 90.19 3.621 0.157 Safe Safe
1.37 7.00 308.35 82.23 0.95 0.0 0.0 83.18 3.729 0.154 Safe Safe
1.31 6.60 291.46 77.72 1.01 0.0 0.0 78.73 3.587 0.161 Safe Safe
1.02 6.20 235.41 62.78 1.08 0.0 0.0 63.85 5.092 0.115 Safe Safe
0.97 5.80 219.51 58.54 1.15 0.0 0.0 59.69 4.788 0.123 Safe Safe
0.81 5.40 187.99 50.13 1.23 0.0 0.0 51.37 5.817 0.103 Safe Safe
0.66 5.00 160.24 42.73 1.33 0.0 0.0 44.06 7.228 0.084 Safe Safe
0.53 4.60 135.43 36.12 1.45 0.0 0.0 37.56 9.239 0.066 Safe Safe
0.40 4.20 112.95 30.12 1.59 0.0 0.0 31.71 12.260 0.051 Safe Safe
0.29 3.80 91.95 24.52 1.75 0.0 0.0 26.27 18.018 0.036 Safe Safe
0.18 3.40 72.53 19.34 1.96 0.0 0.0 21.30 30.698 0.021 Safe Safe
0.10 3.00 54.59 14.56 2.22 0.0 0.0 16.78 63.217 0.011 Safe Safe
0.04 2.60 37.72 10.06 2.56 0.0 0.0 12.62 175.666 0.004 Safe Safe
0.01 2.20 21.44 5.72 3.03 0.0 0.0 8.75 1543.847 0.000 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

224
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 11.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 11.2 m
R0 MPL/RE/23/PW-1 19-Apr-23

Case C
Elevation Vertical
Length of Strap from Elevation spacing
Strap Strap ,L spacing base, hi from Top, of Strap,
layers (m) ,m ,m hj ,m Svj ,m Rhj Rvj Mdj Mrj Mo
1 9.4 0.4 0.4 10.8 0.8 437.11 2156.55 1660.56 10135.78 1399.68
2 8.9 0.8 1.2 10 0.8 378.07 1899.44 1334.78 8452.50 1111.11
3 8.1 0.8 2 9.2 0.8 323.29 1599.10 1054.52 6476.36 865.21
4 8.9 0.8 2.8 8.4 0.8 272.78 1614.64 816.38 7185.14 658.56
5 7.9 0.8 3.6 7.6 0.8 226.53 1306.82 616.94 5161.93 487.75
6 7.9 0.8 4.4 6.8 0.8 184.55 1180.42 452.79 4662.65 349.37
7 7.9 0.8 5.2 6 0.8 146.84 1054.02 320.52 4163.37 240.00
8 7.9 0.8 6 5.2 0.8 113.39 927.62 216.71 3664.09 156.23
9 7.9 0.8 6.8 4.4 0.8 84.22 801.22 137.95 3164.81 94.65
10 8.1 0.8 7.6 3.6 0.8 59.30 691.90 80.83 2802.20 51.84
11 8.6 0.8 8.4 2.8 0.8 38.66 597.01 41.93 2567.15 24.39
12 9.4 0.8 9.2 2 0.8 22.28 502.15 17.84 2360.10 8.89
13 10.4 0.8 10 1.2 0.8 10.17 389.17 5.14 2023.67 1.92
14 12.4 0.8 10.8 0.4 0.8 2.32 265.61 0.43 1646.77 0.07
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

225
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 11.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 11.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check for Check for
Mr/Mo
Ecentricit overturni eccentrici
Dj svj Tpj Tsj Tfj Tcj Tj (Overturi e/L
y, ej ngMr/Mo tye / L ≤
ning)
≥ 1.35 1/6
0.77 7.40 274.37 73.17 0.90 0.0 0.0 74.07 7.24 0.08 Safe Safe
0.70 7.00 253.44 67.58 0.95 0.0 0.0 68.54 7.61 0.08 Safe Safe
0.66 6.60 235.82 62.88 1.01 0.0 0.0 63.89 7.49 0.08 Safe Safe
0.51 6.20 204.68 54.58 1.08 0.0 0.0 55.66 10.91 0.06 Safe Safe
0.47 5.80 187.87 50.10 1.15 0.0 0.0 51.25 10.58 0.06 Safe Safe
0.38 5.40 165.49 44.13 1.23 0.0 0.0 45.37 13.35 0.05 Safe Safe
0.30 5.00 144.55 38.55 1.33 0.0 0.0 39.88 17.35 0.04 Safe Safe
0.23 4.60 124.80 33.28 1.45 0.0 0.0 34.73 23.45 0.03 Safe Safe
0.17 4.20 106.04 28.28 1.59 0.0 0.0 29.87 33.44 0.02 Safe Safe
0.12 3.80 87.96 23.46 1.75 0.0 0.0 25.21 54.05 0.01 Safe Safe
0.07 3.40 70.57 18.82 1.96 0.0 0.0 20.78 105.25 0.01 Safe Safe
0.04 3.00 53.83 14.35 2.22 0.0 0.0 16.58 265.51 0.00 Safe Safe
0.01 2.60 37.52 10.00 2.56 0.0 0.0 12.57 1054.00 0.00 Safe Safe
0.00 2.20 21.43 5.71 3.03 0.0 0.0 8.74 23157.70 0.00 Safe Safe
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -

226
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 11.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 11.2 m
R0 MPL/RE/23/PW-1 19-Apr-23

Seismic Analysis
Elevation Vertical
Length of Strap from Elevation spacing
Strap Strap ,L spacing base, hi from Top, of Strap,
layers (m) ,m ,m hj ,m Svj ,m Rhj Rvj Mo Mrj PI=Wa*Am
1 9.4 0.4 0.4 10.8 0.8 725.81 2269.35 3834.51 10135.78 153.94
2 8.9 0.8 1.2 10 0.8 625.58 2006.24 3067.44 8452.50 131.98
3 8.1 0.8 2 9.2 0.8 532.78 1696.30 2410.04 6476.36 111.71
4 8.9 0.8 2.8 8.4 0.8 447.42 1721.44 1853.87 7185.14 93.13
5 7.9 0.8 3.6 7.6 0.8 369.49 1401.62 1390.48 5161.93 76.23
6 7.9 0.8 4.4 6.8 0.8 299.00 1275.22 1011.41 4662.65 61.03
7 7.9 0.8 5.2 6 0.8 235.94 1148.82 708.22 4163.37 47.51
8 7.9 0.8 6 5.2 0.8 180.32 1022.42 472.45 3664.09 35.69
9 7.9 0.8 6.8 4.4 0.8 132.13 896.02 295.66 3164.81 25.55
10 8.1 0.8 7.6 3.6 0.8 91.38 789.10 169.41 2802.20 17.10
11 8.6 0.8 8.4 2.8 0.8 58.06 700.21 85.23 2567.15 10.35
12 9.4 0.8 9.2 2 0.8 32.18 614.95 34.68 2360.10 5.28
13 10.4 0.8 10 1.2 0.8 13.73 513.97 9.32 2023.67 1.90
14 12.4 0.8 10.8 0.4 0.8 2.72 414.41 0.68 1646.77 0.21
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

227
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 11.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 11.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Rsvj Check for Check for
Mr/Mo
Ecentricit (for overturni eccentrici
Dj svj Tpj Tmd Tj (Overturi e/L
y, ej Internal ngMr/Mo tye / L ≤
ning)
Sliding) ≥ 1.125 1/3
1.92 7.40 408.64 108.97 18.00 127.0 1113.7 2.64 0.20 Safe Safe
1.77 7.00 373.72 99.66 13.81 113.5 984.6 2.76 0.20 Safe Safe
1.65 6.60 353.81 94.35 9.89 104.2 832.5 2.69 0.20 Safe Safe
1.35 6.20 277.92 74.11 8.65 82.8 844.8 3.88 0.15 Safe Safe
1.26 5.80 260.45 69.45 5.66 75.1 687.8 3.71 0.16 Safe Safe
1.09 5.40 222.69 59.38 4.17 63.6 625.8 4.61 0.14 Safe Safe
0.94 5.00 190.99 50.93 2.97 53.9 563.8 5.88 0.12 Safe Safe
0.83 4.60 163.76 43.67 2.02 45.7 501.7 7.76 0.10 Safe Safe
0.75 4.20 139.91 37.31 1.29 38.6 439.7 10.70 0.09 Safe Safe
0.71 3.80 118.25 31.53 0.81 32.3 387.3 16.54 0.09 Safe Safe
0.76 3.40 98.77 26.34 0.49 26.8 343.6 30.12 0.09 Safe Safe
0.92 3.00 81.31 21.68 0.28 22.0 301.8 68.05 0.10 Safe Safe
1.28 2.60 65.57 17.49 0.11 17.6 252.2 217.19 0.12 Safe Safe
2.23 2.20 52.16 13.91 0.02 13.9 203.4 2410.28 0.18 Safe Safe
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

228
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 11.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 11.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Rupture check for Reinforcement FOS REQ = 1.000

MAX Tj
Strap CASE Width of Force per Width of FOS FOS
hj T avialable
Type A,B,C & Panel strip Strip Status Status
SEISMIC
10.80 100 KN 49.83 126.97 2.00 42.32 0.09 1.177 Safe
10.00 85 KN 41.96 117.88 2.00 39.29 0.09 1.068 Safe
9.20 85 KN 41.96 111.10 2.00 37.03 0.09 1.133 Safe
8.40 100 KN 49.83 96.61 2.00 48.30 0.09 1.032 Safe
7.60 100 KN 49.83 90.18 2.00 45.09 0.09 1.105 Safe
6.80 85 KN 41.96 80.49 2.00 40.24 0.09 1.043 Safe
6.00 75 KN 36.68 71.54 2.00 35.77 0.09 1.025 Safe
5.20 75 KN 36.68 63.24 2.00 31.62 0.09 1.160 Safe
4.40 60 KN 29.34 55.47 2.00 27.74 0.09 1.058 Safe
3.60 50 KN 24.46 48.08 2.00 24.04 0.09 1.017 Safe
2.80 50 KN 24.46 41.12 2.00 20.56 0.09 1.189 Safe
2.00 40 KN 19.56 34.61 2.00 17.31 0.09 1.130 Safe
1.20 30 KN 14.67 28.50 2.00 14.25 0.09 1.030 Safe
0.40 30 KN 14.67 22.72 2.00 11.36 0.09 1.292 Safe
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -

229
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 11.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 11.2 m
R0 MPL/RE/23/PW-1 19-Apr-23
Check For Internal Sliding
Strap
length Load case A Load case B Seismic Fos>=1.3 Fos>=1.3 Fos>=1.125
Rhj Rvj Rsvj FOS Rhj Rvj Rsvj FOS FOS Case A Case B Seismic
9.4 785.3 3573.2 1753.6 2.233 785.3 2156.5 1058.3 1.348 1.534 Safe Safe Safe
8.9 687.1 3169.6 1555.5 2.264 687.1 1899.4 932.1 1.357 1.574 Safe Safe Safe
8.1 595.3 2690.3 1320.2 2.218 595.3 1599.1 784.8 1.318 1.562 Safe Safe Safe
8.9 510.0 2742.4 1345.8 2.639 510.0 1614.6 792.4 1.554 1.888 Safe Safe Safe
7.9 431.0 2244.6 1101.5 2.556 431.0 1306.8 641.3 1.488 1.862 Safe Safe Safe
7.9 358.4 2055.0 1008.5 2.814 358.4 1180.4 579.3 1.616 2.093 Safe Safe Safe
7.9 292.3 1865.4 915.5 3.132 292.3 1054.0 517.3 1.770 2.389 Safe Safe Safe
7.9 232.5 1675.8 822.4 3.537 232.5 927.6 455.2 1.958 2.783 Safe Safe Safe
7.9 179.1 1486.2 729.4 4.072 179.1 801.2 393.2 2.195 3.328 Safe Safe Safe
8.1 132.2 1329.5 652.4 4.937 132.2 691.9 339.5 2.569 4.238 Safe Safe Safe
8.6 91.6 1205.1 591.4 6.457 91.6 597.0 293.0 3.199 5.918 Safe Safe Safe
9.4 57.4 1091.6 535.7 9.330 57.4 502.1 246.4 4.292 9.378 Safe Safe Safe
10.4 29.7 958.2 470.2 15.858 29.7 389.2 191.0 6.441 18.368 Safe Safe Safe
12.4 8.3 844.8 414.6 50.047 8.3 265.6 130.3 15.735 74.805 Safe Safe Safe
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -
- - - - - - - - - - - - -

230
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 11.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 11.2 m
R0 MPL/RE/23/PW-1 19-Apr-23

Pull out or Adherence of Reinforcement check

(Pj) = Perimeter of jth layer total horizontal width of Strap of top and bottom faces = 0.180 m

Elevation Vertical Cofficient

Elevation Effective
from spacing Strap of
from Top, length of Case A Tj Puj FOS ≥ 1
base, hi of Strap, length Friction.
hj ,m Strap
,m Svj ,m m
10.8 0.4 0.8 9.4 9.17 126.50 0.491 643.21 5.085
10 1.2 0.8 8.9 8.21 117.88 0.491 535.59 4.543
9.2 2 0.8 8.1 6.95 111.10 0.491 419.26 3.774
8.4 2.8 0.8 8.9 7.28 96.61 0.491 269.36 2.788
7.6 3.6 0.8 7.9 5.82 90.18 0.491 196.31 2.177
6.8 4.4 0.8 7.9 5.36 80.49 0.491 163.25 2.028
6 5.2 0.8 7.9 4.90 71.54 0.491 133.21 1.862
5.2 6 0.8 7.9 4.44 63.24 0.491 106.18 1.679
4.4 6.8 0.8 7.9 3.97 55.47 0.491 82.16 1.481
3.6 7.6 0.8 8.1 3.71 48.08 0.491 64.64 1.344
2.8 8.4 0.8 8.6 3.75 41.12 0.491 53.07 1.291
2 9.2 0.8 9.4 4.09 34.61 0.491 44.52 1.286
1.2 10 0.8 10.4 4.63 28.50 0.491 35.29 1.238
0.4 10.8 0.8 12.4 6.16 22.72 0.491 26.92 1.185
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -

231
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 11.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 11.2 m
R0 MPL/RE/23/PW-1 19-Apr-23

Pr
Seismic Pullout FoS nos of
Case B Tj Puj FOS Case C Tj Puj FOS Status
Tj Resistanc Pullout Strip/m
e
90.19 557.45 6.181 90.19 557.45 6.181 127.0 379.07 2.986 3 Safe
27.73 464.17 16.741 83.18 464.17 5.580 113.5 315.64 2.782 3 Safe
26.24 363.36 13.845 78.73 363.36 4.615 104.2 247.08 2.370 3 Safe
31.93 233.44 7.312 63.85 233.44 3.656 82.8 158.74 1.918 2 Safe
29.84 170.13 5.701 59.69 170.13 2.850 75.1 115.69 1.540 2 Safe
25.68 141.48 5.509 51.37 141.48 2.754 63.6 96.21 1.514 2 Safe
22.03 115.45 5.240 44.06 115.45 2.620 53.9 78.50 1.457 2 Safe
18.78 92.02 4.899 37.56 92.02 2.450 45.7 62.57 1.370 2 Safe
15.85 71.21 4.491 31.71 71.21 2.246 38.6 48.42 1.254 2 Safe
13.14 56.02 4.264 26.27 56.02 2.132 32.3 38.09 1.178 2 Safe
10.65 45.99 4.319 21.30 45.99 2.159 26.8 31.28 1.166 2 Safe
8.39 38.58 4.599 16.78 38.58 2.299 22.0 26.24 1.195 2 Safe
6.31 30.59 4.846 12.62 30.59 2.423 17.6 20.80 1.182 2 Safe
4.37 23.33 5.334 8.75 23.33 2.667 13.9 15.86 1.139 2 Safe
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -
- - - - - - - - - - -

232
Design of RE wall for flyover at 44+646 R0 DESIGN HEIGHT 11.2 m

Revsion Document No. Date

TITLE DESIGN OF RS WALL OF DESIGN HEIGHT 11.2 m
R0 MPL/RE/23/PW-1 19-Apr-23

From Bottom Layer DESIGN HT=

11.200 m

Elevation
Strap Strap No. of
Sr No from
Grade Length Connector
bottom

1 100 KN 9.4 0.4 3

2 85 KN 8.9 1.2 3
3 85 KN 8.1 2.0 3
4 100 KN 8.9 2.8 2
5 100 KN 7.9 3.6 2
6 85 KN 7.9 4.4 2
7 75 KN 7.9 5.2 2
8 75 KN 7.9 6.0 2
9 60 KN 7.9 6.8 2
10 50 KN 8.1 7.6 2
11 50 KN 8.6 8.4 2
12 40 KN 9.4 9.2 2
13 30 KN 10.4 10.0 2
14 30 KN 12.4 10.8 2
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -

233