ECLER TECHNICAL DATA SHEET

NIMBO-24
CABINET LOUDSPEAKERS
Top performance cabinet loudspeaker

PRODUCT OVERVIEW
NIMBO-24 is a premium performance 2-way passive loudspeaker with 80W RMS power, in a compact size with
extended low frequency response. Suitable for outdoor applications, with a cloud-inspired design, result of Ecler's
engineering skills and the collaboration of architects and interior designers.

Including 2 x 4" woofers and a 1" silk tweeter located in the acoustic centre, acting as a single point source to disperse
the sound evenly.

The nominal impedance of the speaker can be selected to 4 ohm or 16 ohm thanks to the front switch located behind
the logo, which allows to modify its impedance without removing the aluminium front grille.

It includes the robust VEASY wall bracket, allowing tilt and pan adjustment using a single screw.

KEY FEATURES APPLICATIONS

• 2-way passive loudspeaker for surface mounting. • Retail
• 2x 4" woofers with 4-layer voice coil improves power • Education
handling and low frequency response. • Corporate
• 1" silk tweeter with neodymium magnet and ferrofluid. • Leisure
• Bass reflex port. • Sports & Wellness
• ABS reinforced with fiberglass non resonant compact • Hospitality
enclosure.
• Wide dispersion pattern.
• Stack Output.
• VEASY bracket compatible with VESA 75 included. Quick
and easy to install, including jumps and markings for
repeating speaker orientation.
• Weather-protected with an IP-44 rating.
• Available in white, black and gold colour.
• RAL paint customization available.
• Ecler Loudspeakers EQ Settings available.
• EASE files available.

1
96-0010-0104 NIMBO-24 EN
 ECLER TECHNICAL DATA SHEET

TECHNICAL SPECIFICATIONS

NIMBO-24

SYSTEM
Effective Freq. Range 1 62Hz-20kHz (-10dB)
Coverage angle 2 165°x150° (HxV)
Power handling 80 W RMS / 320 W Peak
Sensitivity 3 84 dB (1W/1m)
Maximum SPL 4 103 dB continuous / 109 dB peak
Recommended amplifier power 150W RMS
TRANSDUCERS
Ways 2-ways full range
Low frequency driver 2 x 4" Woofer
High frecuency driver 1" Silk Dome Tweeter
Nominal impedance 4Ω / 16Ω
FILTERS
Crossover filter 1,65 KHz
PHYSICAL
Connection type Double INPUT/LINK connector, Euroblock type
Power type selector Front selection by toggle switch
Installation options Surface / Wall mounting
Environmental IP44
Enclosure material ABS reinforced with fibreglass
Grille material Aluminium
Grille fixing system Pressure mount system
Mounting system Stainless Steel VEASY bracket
Operating temperature Min: 0°C ; 32°F
Max: 35°C ; 95°F
Operating humidity <85% HR
Storage temperature Min: -10°C ; 14°F
Max: 50°C ; 122°F
Storage humidity <90% HR
Included accessories Wall-mount bracket, 2x Euroblock connector
Finished colour White (RAL9003), Black (RAL9005) or
Gold (RAL1036, approx.)
Dimensions (WxHxD) 366 x 178 x 185 mm / 14.41 x 7 x 7.28 in.
Weight 3 kg / 6.61 lb
Pieces per box 1
Shipping dimensions (WxHxD) 450 x 310 x 300 mm / 17.71 x 12.20 x 11.81 in.
Shipping weight 5.7 kg / 12.57 lb

1
below the sound pressure level at specified sensitivity
2
6dB below the sound pressure level than that at the direction of maximum level, Max. angle between 1 kHz and 4 kHz.
3
Measured on-axis, far field and referenced to 1 meter by inverse square law. Average from 100 Hz to 10 kHz.
4
Calculated from sensitivity and power handling specifications, exclusive of power compression

2
ECLER TECHNICAL DATA SHEET

FREQUENCY RESPONSE ON-AXIS

POLAR DIAGRAMS

HORIZONTAL

3
ECLER TECHNICAL DATA SHEET

VERTICAL

4
 ECLER TECHNICAL DATA SHEET

MECHANICAL DIAGRAM

All measures in mm.

Ecler NIMBO-24 Mechanical Diagram

178
83
185
All the measurments are in mm

366

61-1003-0200 www.ecler.com

5
 ECLER TECHNICAL DATA SHEET

A&E SPECIFICATIONS
The loudspeaker shall be a 2-way loudspeaker cabinet, incorporating 2x 4" woofers with 4-layer voice coil and 1" silk
tweeter with neodymium magnet and ferrofluid. It shall have a power handling of 80 W RMS with a peak power
handling of 320 W and the effective frequency range (±10 dB) shall be from 62 Hz to 20 kHz. Crossover filter shall be
at 1,65 kHz. The sensitivity shall be 84 dB when measuring with an input signal of 1 Watt at a distance of 1 meter,
while the maximum continuous sound pressure level shall be 109 dB.

The coverage angle shall be 167º x 162º. The loudspeaker shall have a switch located behind the logo, which allows to
modify its impedance between 4Ω or 16 Ω without removing the aluminium front grille. It shall have a non-resonant
enclosure constructed out of ABS reinforced with fibreglass. The front finishing shall be made with an overlapping front
aluminium grill with a rotable logo, giving a slim and elegant impression. It shall include a VEASY wall-mount bracket,
and 2x Euroblock connectors.

The full range system’s enclosure shall be 364 mm wide, 178 mm high and 185 mm deep and the weight shall not
exceed 3 Kg.

The loudspeaker shall be the ECLER NIMBO-24.

All product characteristics are subject to variation due to production tolerances.

NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or
manufacturing that may affect these product specifications.
For technical queries contact your supplier, distributor or complete the contact form on our website,
in Support / Technical requests.
Motors, 166‐168 | 08038 Barcelona, Spain | Tel. (+34) 932238403 | [email protected] | www.ecler.com 6