0% found this document useful (0 votes)
49 views2 pages

10m 4 Inch Mast RolaCage - Danimex

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
49 views2 pages

10m 4 Inch Mast RolaCage - Danimex

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

RolaTube 10m 4” Single Mast

RolaCage System
MAST DESCRIPTION
Length 10m x 4” diameter (10m deployed length from cage, 10.6m in total)

Nominal Tube Diameter (Inner) 4” (101.2mm)

Nominal Tube Arc 355°

Composite Wall Thickness 2.1mm 1

Rolled Width 325mm 1

Typical Rolled Outer Diameter 215mm

Typical Rolled Inner Diameter 122mm

Mast/RolaCage Weight 18.45kg (without ancils)

Mast/RolaCage Volume 420 x 275 x 285mm

Maximum Top Load 2


12kg

Maximum Deployed Wind speed 3 60mph

Environmental Complies with relevant sections of MILSTD 810G

Note 1 – Average figures subject to normal manufacturing Note 3 – Maximum wind loading is based on the bare
tolerances. mast correctly deployed and with Guy Pegs firmly posi-
Note 2 – Top load must not be exceeded. Deployment and tioned. End user or system integrator must take responsi-
recovery must be undertaken with the tension in all 3 Top bility for deployment and ensuring that the final system is
Cap Guy Ropes being managed, to ensure that the top fit for purpose with regard to wind loadings once top load
load does not move off centre and create bending load or other equipment is mounted.
on the mast while top load is being elevated. This can only
be achieved through 5 man operation during deployment
and recovery.

DMX-2018-01

Danimex Communication A/S Elholm 4 • DK-6400 Sønderborg • Denmark


Phone: +45 7342 5600 • Fax: +45 7342 5615 • [email protected] • www.danimex.com
COMPONENT ROLATUBE MATERIAL WEIGHT QTY
PART NUMBER
10m Mast 851-410000 Glass Fibre Reinforced, Polymer Composite 9.65kg 1

RolaCage 800-007112 Aluminium Panels, Aluminium Bars, Stainless Steel Bolts 9.125kg 1

Top Cap 800-004104 Aluminium, Stainless Steel Screws, Stainless Steel Drop Nose Pin 1.12kg 1

Set of 3 14.5m Top Cap Guys 207-004123 Polyester Braided Cord, Stainless Steel Snap Hook, HDPE guy tidy 0.92kg 1

Slot Locker Cuff 800-000127 PA6, Stainless Steel, Anodized Aluminum 0.43kg Each = 1.29kg 3

Set of 3 10m Triangulated Guys 207-004120 Polyester Braided Cord, Stainless Steel Ring, Stainless Steel Snap 0.9kg 1
Hook, HDPE guy tidy
Steel Rock Pegs 207-002002 Zinc Plated Mild Steel, Nylon head 0.8kg 10

Soft Ground Pegs 207-002005 Nylon 0.3kg 6

Medium Bag 502-003050 Nylon / water resistant 0.6kg 1

Total Weight: 25kg

Shelf Life:
10 years in controlled dry environments between -15°C and 85°C

Temperature Range:
Operations -30°C to 60°C (-22°F to +140°F)
Storage -30°C to 70°C (-22°F to +158°F)

The system is rated to the loads stated and the end user is responsible for ensuring that user guides are followed and that loads are
secured to the mast in a fashion that is safe and does not compromise the mast itself. RolaTube Expeditionary Systems does not
accept liability or provide any warranty for usage not covered in this document.

Danimex Communication A/S Elholm 4 • DK-6400 Sønderborg • Denmark


Phone: +45 7342 5600 • Fax: +45 7342 5615 • [email protected] • www.danimex.com

You might also like