Wireless Receiver and Transmitter
Memory function: after turn on, it will connect with the last paired device automatically. When in standby
Status, short press button once. blue light flashing double times, then it will connect with the last paired
device automatically.
Unconnected/standby Status: red/blue led light flashing fast.
Connected/standby Status: blue light flashing once every second.
Automatic off function:' not connected with other device with in 5 minutes, It will turn off automatically,
into save power mode.
Led light off.
Low power Status: red light flashing.
1 .Receive mode:(slide switch must under Off Status)
(for all audio devices with audio input port)
Pairing Steps:
A.SIide the switch on RX end, long press button 2s to turn on device, Bluetooth Status led light red/blue
flashing alternately. (attention: sliding switch to RX must before turn on device. changing mode must under
device off, do not changing during power on)
B. After turn on device, Bluetooth Status led light led/blue flashing alternately and fast, waiting for pairing.
C. Input 3.5mm cable into the AUX port, the other end into AUX input port of home audio device.
D.Open your phone, tablet Bluetooth function searching’B-1 OS’ in the list, and connect it.
E. Connected successfully, the Bluetooth Status light in blue and flash once/every second, then you can Start
to enjoy your music freely.
This product is receive and transmit 2 in 1 bluetooth adapter, built-in JL chipset.It's easy to use,receive and
transmit all of the audio freely and easily Via this product.you can cast the music in you phone to the home
audio equipment.more convenient is that you can also make teievision.CD player,Mp3 or any other audio
device sent to the Speakers or headphones with Bluetooth,
Since the product use lowOlatency technology.it also support online games.television movies,real-time
voice transmission.
This product built-in rechargeable battery inside.long battery life, the perfect solution to solve the
connection problem between audio devices and mobile devices.expanding the function of all audio devices.
Bluetooth version:5.3
Supported protocol:A2DP, AVRCP
Bluetooth distance:10m(open space)
Playing time: About 6 hours Charging time: About 2 hours Charging input voltage: DC 5V
Input/Output connecting mode:3.5mm Stereo audio port Compatibility: compatible with phones and Pad of
Android/IOS System, and all Bluetooth audio devices.
2.Transmit mode:( slide switch must under Off statusXThis product on transmit mode, can work with TV
transmitting sound to Bluetooth devices(headphone/speaker) wirelessly.
Pairing steps:
A.Turn on Bluetooth speaker/headphone to ready for pairing.
B. Slide the switch on “TX” end, long press button 2s to turn on device. Bluetooth Status led light red/blue
led light flashing flashi alternately fast (attention: sliding switch to TX must before turn on device, changing
mode must under device off, do not changim during power on).
C. Bluetooth Status led light flashing fast, searching and waiting for pairing.
D. Input 3.5mm cable into the aux port , the other end into phone/tablet/Mp3/CD player/computer/TV etc
devices with aux output port.(such as jack port)
E. Bluetooth status light blue flashing fast, on searching Status. Please put it with Bluetooth device(such as
headphone) close to connect.
F. After connected successfully, Bluetooth Status blue led
light flash every second, then you will hear sound from Bluetooth speaker/headphone.
Note:
1.Different Bluetooth device(headphone) with different solution and protocol, so that will have different on
searching/ pairing time.
2.If connected failed and unconnected for a long time, please turn off, then try pairing again.
3.Suggest to turn on Bluetooth devices(speaker/headphone) firstly, then turn this product, so that can
connected more fast.
You can try to solve Problems by these ways if facing Problems below.
Please connect the local distributors if you can't solve problems these ways.but please don't disassemble the
receiver to repair yourself, for fear that it may cause any unnecessary problems by doing so.
Bluetooth audio adapter can’t work normally?
1 .Check if the adapter is ON.
2. Please insert the charger to check whether the battery has any electricity.
3. Please turn of the adapter, and turn it on again. and then check if it can work normally.
4. First play the music of the first Bluetooth device which is paired and connecter first. Cancel the unused
devices. and reset to pair other new devices.
5. Please check product whether in right working mode, checking mode by the indicator light.
6.If can't connected Bluetooth devices(such as Bluetooth headset), try to closer the devices, or press the
switch and try again.
7.Because of Bluetooth receiver chip scheme and transport protocol are different, there will be something
wrong with connection, we will continue optimizing the device, than for supporting.
This product is built-in rechargeable battery for long standby and use .Recommended Charge full power
before first time use.
1 Insert the USB-C charging cable into the product charging port. Another side into output Standard USB
port(such as mobile phone chargers, PC USB interface).
2 About 2 hours charging time.
3 charging Status is red light, charging is finished when red light turns off.
4 Play music when charging, also you can enjoy music While charging.
5 Low battery Status the(receive/transmit)mode Status indicator flashes
slowly.
Turn On Long press button 2s tili the red/blue led light flashing alternately fast.
Turn Off: Long press button 2s,the red light flashing twice and all the light off
Pairing and searching Status:
In transmit mode: Long press button 2s to turn on.
Blue led light flashing fast, into searching Bluetooth devices Status.
In receive mode: Long press buttons 2s to turn on,Red/blue led light flashing alternately, into waiting for
pairing Status.
