1. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED.

8 MM @200 MM C/C
2. USE C.C. M-15 FOR PCC WORK.
BOTH WAY
3. USE C.C. M-30 FOR FOUNDATION, BRACING, STAIRCASE &
4 NO. 12 MM STAGING WORK.
4. USE C.C. M-30 FOR CONTAINER (TOP DOME,BOTTOM DOME,
ROOF DOME 600 VERTICAL WALL, BALCONY, CONICAL DOME & RING BEAM) WORK.
ROOF DOME 100MM THICK. 5. CLEAR COVER TO REINFORCEMENT SHALL BE:-
125 THICK A. IN CONTAINER PORSION - 40 MM
SECTION OF MAN HOLE B. IN COLUMNS & BRACES - 40 MM
C. IN FOUNDATION - 60 MM

1250
12MM ∅ 200 C/C D. IN STAIRCASES - 25 MM
00 10 MM ∅ 200 C/C E. IN OTHERMEMBERS - 25 MM

250 250
RADIAL & CIRCULAR 18
BOTH WAYS 6. OVERLAP LENGTH IN COLUMNS & BRACES SHALL BE 80D, WHERE
RING BEAM ALUMINIUM 25MM D IS DIAMETER OF BAR.
200X600 0.00 DIA. NON SLIPPERY 7. OVERLAP LENGTH IN CONTAINER PORTION SHALL BE:-
A. FOR HOOP TENSION RINGS IN WALL & CONICAL DOME-50D.
300MM C/C.
600

6NO 12 MM DIA. BARS FOR TOP RING BEAM B. FOR OTHER STEEL IN DOME & WALL-35D.
WITH 10 MM DIA. RINGS @200MM C/C. C. USE Fe-500 GRADE OF STEEL.
ALUMINIUM 8. DEPTH OF FOUNDATION SHALL BE BETWEEN 1.00M
SECTION 9. S.B.C. SOIL FOR DESIGN OF FOUNDATION HAS BEEN TAKEN
50x25x3 ADOPTED - 20.00 T/SQM.
10. ALL PIPES AS PER CONTRACT.
10MM ∅200 C/C ON BOTH
11. USE 8MM ABOVE BARS OF TOR STEEL.
FACE HORIZONTAL .600 TO 12. STEEL LADDER OF ANGLE 50X50X5 WITH 16MM BARS @ 300MM
1000 C/C 600MM WIDE.
13. RAILING IS OF 20 MM O.D. PIPES IN 3 ROWS.
DETAIL OF ALUMINIUM LADDER
V.WALL
1000
200 THICK 10MM ∅ @175C/C
HORIZON0TAL FROM
VERTICAL STEEL 8 MM @200 C/C
1000 TO 2000
BOTH WAY
ON REMOTE FACE
9000 INTERNAL DIA
1200

4000

80
4300
VERTICAL STEEL
ON REMOTE FACE 600 2 NO 12 MM
2000

600
COL. 100X100 4 NO
12MM ∅ @200C/C BOTH
8MM CUT RING
FACE VERTICAL BARS 200 C/C 600 DIA. CUT RINGS 8MM AT

100
10MM ∅ @150C/C VENT @ 200 C/C
HORIZON0TAL FROM 4 NO.12 MM CIRCULAR 2 NO. 12 MM
4 NO
2000 TO 2900 4 NO. 12 MM CIRCULAR
100X100 COL
3000 SCETION

12MM @200 C/c DETAIL OF AIR VENT

12MM RADIAL & BOTH SIDES
10MM DIA. BARS

500
CIRCULAR BARS (TOP & BOTTOM SIDES) 8MM@200C/C
@200MM C/c
@200 C/c 3500 500
200

3800 900 x 600 *THIS DRAWING & DESIGN FULL

100

100 350 1100 4700 4 NO. 12 MM OR PART MAY NOT BE

12MM DIA.BAR@200 C/c COMING FROM OUTER FACE & 600 REPRODUCE OR USED FOR
OTHER PROJECT WITHOUT
@ 200 MM COMING FROM INNER FACE OF CYL. WALL PERMISSION

DETAIL OF BASE SLAB, WALL & TOP DOME

DETAIL OF MAN HOLE
OF GROUND SERVICE RESERVOIR (GSR) M-30 CHIEF MUNICIPAL OFFICER

250 250
CLIENT: NAGAR PARISHAD KANAD
DISTRICT :- AAGAR-MALWA (M.P.)
300 R.C.C 200 KL GROUND SERVICE RESERVIOR AT WARD
2-16MM DIA. BARS PROJECT: NO.15 AT AYODHYA BASTI, KANAD TOWN & DIST.-
300
@250MM C/C. AAGAR-MALWA (M.P.)
Reinforcement Detail For Wall IRON POST 6MM WELD
Levels from top On Liquid Face On Remote Face L-50x50x5 REINFOCEMENT DETAIL OF TOP DOME ,VERTICAL WALL,
TITLE: FLOOR SLAB VERTICAL & COMPONENTS OF DETAILS
300 Hoop Steel (a) Vert. Steel (b) Hor. Steel (c) Vertical Steel (d)
000 To 1000 10 @ 200 c/c 12 @ 200 c/c 10 @ 200 c/c 12 @ 200 c/c M/S JAGDISH, GRAM NANDNI, TEHSHEEL -
DETAIL AT- A CONTRA
1000 To 2000
JEERAPUR (M.P.)
10 @ 175 c/c 12 @ 200 c/c 10 @ 175 c/c 12 @ 200 c/c DETAIL OF STEEL LADDER CTOR:
2000 To 2900 10 @ 150 c/c 12 @ 200 c/c 10 @ 150 c/c 12 @ 200 c/c
SMD DIGITAL TESTING LABORATORY & INFRASTRUCTURE,
DESIGN BY: A-79/80, SOUMYA PRIVILEGE, TRILANGA, NEAR AURA MALL,
BHOPAL 462039 ( M.P.), Ph. No.- 07898470877

FOR OTHER DETAILS REFER DRAWING NO. - 1 DRAW. NO.:

DRAW. NO.: MK-SMD -200 KL GSR-RC-II 2/2 DATE: 15-09-2024 SCALE: NTS.