TM 9-1015-221-34P

SUPERSEDES COPY DATED 14 JULY 1969

TECHNICAL MANUAL

DIRECT SUPPORT AND GENERAL SUPPORT

MAINTENANCE REPAIR PARTS AND
SPECIAL TOOLS LIST

FOR

RIFLE, RECOILLESS, 106-MM:

M40A2 (1015-00-133-8484)
AND
M40A4 (1015-00-133-8485)

HEADQUARTERS, DEPARTMENT OF THE ARMY

MAY 1986
 *TM 9-1015-221-34P

TECHNICAL MANUAL HEADQUARTERS

NO. 9-1015-221-34P } DEPARTMENT OF THE ARMY

Washington, DC 20 May 1986

Direct Support and General Support Maintenance

Repair Parts and Special Tools List
for
RIFLE, RECOILLESS, 106-MM:
M40A2 (1015-00-133-8484)
and
M40A4 (1015-00-133-8485)

Current as of 13 February 1986

REPORTING ERRORS AND RECOMMENDING IMPROVEMENTS

You can help improve this manual. If you find any mistakes or if you know of a way to
improve the procedures, please let us know. Mail your letter, DA Form 2028
(Recommended Changes to Publications and Blank Forms), or DA Form 2028-2 located
in the back of this manual direct to: Commander, US Army Armament, Munitions and
Chemical Command, ATTN: AMSMC-MAS, Rock Island, IL 61299-6000. A reply will be
furnished to you.

TABLE OF CONTENTS

Illus.
Page Figure
Section I. INTRODUCTION ................................................................................................ 1
Section II. REPAIR PARTS LIST ..................................................................................... 1-1
Group 00 Rifle, recoilless, 106-mm: M40A2 (11578739) or
M40A4 (11578740) ......................................................................................... 1-1 1
Group 01 Gun, spotting, caliber .50: M8C (7268115) ..................................................... 2-1 2
0101 Bolt assembly (7266341) ........................................................................ 3-1 3
0102 Buffer assembly (7266342)..................................................................... 4-1 4
0103 Operating rod assembly (7267859) ....................................................... 5-1 5
0104 Firing mechanism assembly (7268119) ................................................. 6-1 6
010401 Sear release assembly (7266500) ................................................ 7-1 7
010402 Housing and catch assembly (7268118) ...................................... 8-1 8
0105 Receiver and barrel assembly (7268255) .............................................. 9-1 9
010501 Receiver assembly (7268254) ..................................................... 10-1 10
010502 Barrel assembly (7790489).......................................................... 11-1 11
Group 04 Cannon, 106-mm: M206 (11578014) ............................................................ 12-1 12
0405 Hinge assembly (7308856)................................................................... 12-1 12
Group 04 Cannon, 106-mm: M206 (11578014) ............................................................ 13-1 13
0406 Vent assembly (7309187)..................................................................... 13-1 13

*This manual supersedes TM 9-1015-221-35P, dated 14 July 1969, including all changes.
 TM 9-1015-221-34P

Illus.
Page Figure
Group 04 Cannon, 106-mm: M206 (11578014) ............................................................ 14-1 14
0401 Detent assembly, cartridge case (7230797) ........................................ 15-1 15
0402 Dog assembly (8766017) ..................................................................... 16-1 16
0403 Operating lever (7307520).................................................................... 17-1 17
0404 Lanyard rod assembly (7307472) ......................................................... 18-1 18
Group 05 Mount, rifle, 106-mm: M79 (8403200) ........................................................... 19-1 19
0501 and 0601 Elevating and firing assembly (8403260).............................. 20-1 20
0501 and 0601 Elevating and firing assembly (8403260) ............................. 21-1 21
050102 and 060102 Planetary gear assembly (8403270) ....................... 21-1 21
050101 and 060101 Elevating cradle assembly (8403193)...................... 22-1 22
0502 and 0602 Traversing assembly (8403250) .......................................... 23-1 23
050201 and 060201 Shaft assembly (8413117) ...................................... 23-1 23
050201 and 060202 Traversing drive assembly (8403259) ..................... 24-1 24
0503 Base assembly (front arm and parts) (8403161) ................................. 26-1 26
0503 Base assembly (rear arms and parts) (8403161) ................................ 26-1 26
Group 06 Mount, rifle, 106-mm: M92 (8407830) .......................................................... 27-1 27
0603 Rifle mount adapter assembly (8407836) ............................................ 28-1 28
060301 Collar and pin assembly (8407817) ............................................ 28-1 28
Group 07 Tripod, rifle mount: M27 (8407810) .............................................................. 29-1 29
Group 09 Gun, subcaliber caliber .30: M9 (7307568) ................................................... 30-1 30
0901 Door assembly (11577244) .................................................................. 30-1 30
Group 12 Venturi wrench (7309119) ............................................................................. 31-1 31
Group 13 Artillery cleaning brush (8766039) ................................................................. 32-1 32
Section III. SPECIAL TOOLS LIST ................................................................................. 33-1
Group 9500 Special tools..................................................................................................... 33-1 33
Section IV. NATIONAL STOCK NUMBER AND PART NUMBER INDEX .......................I-1

ii
 TM 9-1015-221-34P

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

REPAIR PARTS AND SPECIAL TOOLS LIST

SECTION I INTRODUCTION

1. SCOPE. This RPSTL lists and authorizes spares and repair parts; special tools; special test, measurement, and
diagnostic equipment (TMDE); and other special support equipment required for performance of direct support and
general support maintenance of the 106-mm recoilless rifle. It authorizes the requisitioning, issue, and disposition of
spares, repair parts and special tools as indicated by the Source, Maintenance and Recoverability (SMR) codes.

2. GENERAL. In addition to Section I, Introduction, this Repair Parts and Special Tools List is divided into the following
sections:
a. Section II Repair Parts List. A list of spares and repair parts authorized by this RPSTL for use in the
performance of maintenance. The list also includes parts which must be removed for replacement of the authorized parts.
Parts lists are composed of functional groups in ascending alphanumeric sequence, with the parts in each group listed in
ascending figure and item number sequence. Bulk materials are listed in item name sequence. Repair parts kits are
listed separately in their own functional group within section II. Repair parts for repairable special tools are also listed in
this section. Items listed are shown on the associated illustration(s)/figure(s).
b. Section III Special Tools List. A list of special tools, special TMDE, and other special support equipment
authorized by this RPSTL (as indicated by Basis of Issue (BOI) information in DESCRIPTION AND USABLE ON CODE
column) for the performance of maintenance.
c. Section IV National Stock Number and Part Number Index. A list, in National item identification number (NIIN)
sequence, of all National stock numbered items appearing in the listings, followed by a list in alphanumeric sequence of all
part numbers appearing in the listings. National stock numbers and part numbers are cross-referenced to each illustration
figure and item number appearance.

3. EXPLANATION OF COLUMNS.
a. ITEM NO. (Column (1)). Indicates the number used to identify items called out in the illustration.
b. SMR CODE (Column (2)). The Source, Maintenance, and Recoverability (SMR) code is a 5-position code
containing supply/requisitioning information, maintenance category authorization criteria, and disposition instructions, as
shown in the following breakout:

*Complete Repair: Maintenance capacity, capability, and authority to perform all the corrective maintenance tasks of the
"Repair" function in a use/user environment in order to restore serviceability to a failed item.

1
 TM 9-1015-221-34P

(1) Source code. The source code tells you how you get an item needed for maintenance, repair, or overhaul of an
end item/equipment. Explanations of source codes follow:

Code Explanation

Stocked items; use the applicable NSN to request/requisition items with these
source codes. They are authorized to the category indicated by the code entered in
the 3d position of the SMR code.

**NOTE: Items coded PC are subject to deterioration.

-------------------------------------------------------------------------------------------------------------
Items with these codes are not to be requested/requisitioned individually. They are
part of a kit which is authorized to the maintenance category indicated in the 3d
position of the SMR code. The complete kit must be requisitioned and applied.
-------------------------------------------------------------------------------------------------------------
Items with these codes are not to be requested/requisitioned individually. They must
be made from bulk material which is identified by the part number in the
DESCRIPTION AND USABLE ON CODE (UOC) column and listed in the bulk
material group in the repair parts list in this RPSTL. If the item is authorized to you
by the 3d position code of the SMR code, but the source code indicates it is made at
a higher level, order the item from the higher level of maintenance.

Items with these codes are not to be requested/requisitioned individually. The parts
that make up the assembled item must be requisitioned or fabricated and assembled
at the level of maintenance indicated by the source code. If the 3d position code of
the SMR code authorizes you to replace the item, but the source code indicates the
item is assembled at a higher level, order the item from the higher level of
maintenance.

XA - Do not requisition an "XA"-coded item. Order its next higher assembly. (Also, refer to the NOTE below.)

XB - If an "XB" item is not available from salvage, order it using the FSCM and part number given.

XC - Installation drawing, diagram, instruction sheet, field service drawing, that is identified by manufacturer’s part
number.

XD- Item is not stocked. Order an "XD"-coded item through normal supply channels using the FSCM and part
number given, if no NSN is available.

2
 TM 9-1015-221-34P

NOTE
Cannibalization or controlled exchange, when authorized, may be used as a source of
supply for items with the above source codes, except for those source coded "XA" or
those aircraft support items restricted by requirements of AR 700-42.

(2) Maintenance code. Maintenance codes tell you the level(s) of maintenance authorized to USE and REPAIR
support items. The maintenance codes are entered in the third and fourth positions of the SMR code as follows:

(a) The maintenance code entered in the third position tells you the lowest maintenance level authorized to
remove, replace, and use an item. The maintenance code entered in the third position will indicate authorization to one of
the following categories of maintenance.

Code Application/Explanation

C - Crew or operator maintenance done within organizational or aviation unit maintenance.

O - Organizational or aviation unit category can remove, replace, and use the item.

F - Direct support or aviation intermediate level can remove, replace, and use the item.

H - General support level can remove, replace, and use the item.

L - Specialized repair activity can remove, replace, and use the item.

D - Depot level can remove, replace, and use the item.

(b) The maintenance code entered in the fourth position tells you whether or not the item is to be repaired and
identifies the lowest maintenance level with the capability to do complete repair (i.e., perform all authorized repair
functions).

NOTE
Some limited repair may be done on the item at a lower level of maintenance, if
authorized by the Maintenance Allocation Chart (MAC) and SMR codes.

This position will contain one of the following maintenance codes.

Code Application/Explanation

O - Organizational or aviation unit is the lowest level that can do complete repair of the item.

F - Direct support or aviation intermediate is the lowest level that can do complete repair of the item.

H - General support is the lowest level that can do complete repair of the item.

L - Specialized repair activity (designate the specialized repair activity) is the lowest level that can do
complete repair of the item.

3
 TM 9-1015-221-34P

Code Explanation

D - Depot is the lowest level that can do complete repair of the item.

Z - Nonreparable. No repair is authorized.

B - No repair is authorized. No parts or special tools are authorized for the maintenance of a "B"-
coded item. However, the item may be reconditioned by adjusting, lubricating, etc., at the user
level.

(3) Recoverability code. Recoverability codes are assigned to items to indicate the disposition action on
unserviceable items. The recoverability code is entered in the fifth position of the SMR code as follows:

Code Application/Explanation
Z - Nonreparable item. When unserviceable, condemn and dispose of the item at the level of
maintenance shown in 3d position of SMR code.

O - Reparable item. When uneconomically reparable, condemn and dispose of the item at
organizational or aviation unit level.

F - Reparable item. When uneconomically reparable, condemn and dispose of the item at the direct
support or aviation intermediate level.

H - Reparable item. When uneconomically reparable, condemn and dispose of the item at the
general support level.

D - Reparable item. When beyond lower level repair capability, return to depot. Condemnation and
disposal of item not authorized below depot category.

L - Reparable item. Condemnation and disposal not authorized below specialized repair activity
(SRA).

A - Item requires special handling or condemnation procedures because of specific reasons (e.g.,
precious metal content, high dollar value, critical material, or hazardous material). Refer to
appropriate manuals/directives for specific instructions.

c. FSCM (Column (3)). The Federal Supply Code for Manufacturer (FSCM) is a 5-digit numeric code which is used
to identify the manufacturer, distributor, or Government agency, etc., that supplies the item.
d. PART NUMBER (Column (4)). Indicates the primary number used by the manufacturer (individual, company,
firm, corporation, or Government activity), which controls the design and characteristics of the item by means of its
engineering drawings, specifications standards, and inspection requirements to identify an item or range of items.

NOTE
When you use an NSN to requisition an item, the item you receive may have a different part number from
the part ordered.

e. DESCRIPTION AND USABLE ON CODE (UOC) (Column (5)). This column includes the following information:
(1) The Federal item name and, when required, a minimum description to identify the item.
(2) Spare/repair parts that make up an assembled item are listed immediately following the assembled item line
entry or reference is made to the applicable figure.
(3) The usable on code, when applicable (see paragraph 5, special information).

4
 TM 9-1015-221-34P

(4) In the Special Tools List section, the basis of issue (BOI) appears as the last line(s) in the entry for each
special tool, special TMDE, and other special support equipment. When density of equipments supported exceeds density
spread indicated in the basis of issue, the total authorization is increased proportionately.
(5) The statement "END OF FIGURE" appears just below the last item description in column 5 for a given figure
in both section II and section III.

f. QTY(Column (6)). The QTY (quantity per figure column) indicates the quantity of the item used in the breakout
shown on the illustration figure, which is prepared for a functional group, subfunctional group, or an assembly. A "V"
appearing in this column in lieu of a quantity indicates that the quantity is variable and the quantity may vary from
application to application.

4. EXPLANATION OF COLUMNS (Section IV).

a. NATIONAL STOCK NUMBER INDEX.
(1) STOCK NUMBER column. This column lists the NSN by National item identification number

NSN
(NIIN) sequence. The NIIN consists of the last nine digits of the NSN (i.e., 5385-01-574-1467).
NIIN

When using this column to locate an item, ignore the first four digits of the NSN. However, the complete NSN should be
used when ordering items by stock number.
(2) FIG. column. This column lists the number of the figure where the item is identified/located. The figures
are in numerical order in section II and section III.
(3) ITEM column. The item number identifies the item associated with the figure listed in the adjacent FIG.
column. This item is also identified by the NSN listed on the same line.
b. PART NUMBER INDEX. Part numbers in this index are listed by part number in ascending alphanumeric
sequence (i.e., vertical arrangement of letter and number combination which places the first letter or digit of each group in
order A through Z, followed by the numbers 0 through 9 and each following letter or digit in like order).
(1) FSCM column. The Federal Supply Code for Manufacturer (FSCM) is a 5-digit numeric code used to
identify the manufacturer, distributor, or Government agency, etc., that supplies the item.
(2) PART NUMBER column. Indicates the primary number used by the manufacturer (individual, firm,
corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering
drawings, specifications standards, and inspection requirements to identify an item or range of items.
(3) STOCK NUMBER column. This column lists the NSN for the associated part number and manufacturer
identified in the PART NUMBER and FSCM columns to the left.
(4) FIG. column. This column lists the number of the figure where the item is identified/located in sections II
and III.
(5) ITEM column. The item number is that number assigned to the item as it appears in the figure referenced in
the adjacent figure number column.

5. SPECIAL INFORMATION.
a. Usable on Code. The usable on code appears in the lower left corner of the DESCRIPTION column heading.
Usable on codes are shown as "UOC: ......... "in DESCRIPTION column (justified left) on the first line applicable item
description/nomenclature. Uncoded items are applicable to all models. Identification of the usable on codes used in the
RPSTL are:

Code Used On

J80 Model M40A2

J81 Model M40A4

5
 TM 9-1015-221-34P

b. Assembly Instructions. Detailed assembly instructions for items source coded to be assembled from component
spare/repair parts are found in TM 9-1015-221-12 and TM 9-1015-221-34. Items that make up the assembly are listed
immediately following the assembled item entry or reference is made to an applicable figure.
c. Associated Publications. The publication(s) listed below pertain to the recoilless rifle and its components:

Publication Short Title

LO 9-1015-221-12 Rifle, Recoilless, 106-mm: M40A2 and M40A4

TM 9-1015-221-12 Rifle, Recoilless, 106-mm: M40A2 and M40A4
TM 9-1015-221-20P Rifle, Recoilless, 106-mm: M40A2 and M40A4
TM 9-1015-221-34 Rifle, Recoilless, 106-mm: M40A2 and M40A4

6. HOW TO LOCATE REPAIR PARTS.

a. When National Stock Number or Part Number is Not Known:
(1) First. Using the table of contents, determine the assembly group or subassembly group to which the item
belongs. This is necessary since figures are prepared for assembly groups and subassembly groups, and listings are
divided into the same groups.
(2) Second. Find the figure covering the functional group or subfunctional group to which the item belongs.
(3) Third. Identify the item on the figure and note the item number.
(4) Fourth. Refer to the Repair Parts List for the figure to find the part number for the item number noted on the
figure.
b. When National Stock Number or Part Number is Known:
(1) First. Using the index of National stock numbers and part numbers, find the pertinent National stock
number or part number. The NSN index is in National Item Identification Number (NIIN) sequence (see 4a(1)). The part
numbers in the PART NUMBER INDEX are listed in ascending alphanumeric sequence (see 4b). Both indexes cross-
reference you to the illustration figure and item number of the item you are looking for.
(2) Second. After finding the figure and item number, verify that the item is the one you’re looking for, then
locate the item number in the repair parts list for the figure.

7. ABBREVIATIONS. Not applicable.

6
SECTION II TM 9-1015-221-34P

Section II. REPAIR PARTS LIST

Figure 1. Rifle, recoilless, 106-mm: M40A2 or M40A4.

SECTION II TM 9-1015-221-34P

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 00 RIFLE, RECOILLESS, 106-MM:

M40A2 (11578739) OR M40A4 (11578740)

FIG.1 RIFLE, RECOILLESS, 106MM:

M40A2 OR M40A4

1 PAFDD 19206 11578014 CANNON, 106 MILLIMETER, M206 .................................................. 1

2 PAFHH 19204 7268115 GUN, SPOTTING, M8C ..................................................................... 1

3 XAFFA 19204 8403200 MOUNT, 106MM RIFLE, M79 ............................................................ 1

UOC:J80

4 PAFFF 19204 8407810 TRIPOD, RIFLE MOUNT M27 ........................................................... 1

UOC:J81

5 PAFFA 19204 8407830 MOUNT, RIFLE M92 .......................................................................... 1

UOC:J81

6 PAOFF 19200 8299677 CLAMP ............................................................................................... 1

7 PAODD 19200 8299670 MOUNT TELESCOPE, M90 ............................................................... 1

8 PACDD 19200 8286960 TELESCOPE, ELBOW ....................................................................... 1

9 PAOFF 19200 8293769 COVER................................................................................................ 1

END OF FIGURE

1-1
SECTION II TM 9-1015-221-34P

Figure 2. Gun, spotting, caliber .50: M8C.

SECTION II TM 9-1015-221-34P

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 01 GUN, SPOTTING, CALIBER .50:

M8C (7268115)

FIG.2 GUN, SPOTTING,

CALIBER .50: M8C

1 PAOZZ 19204 12003046 MAGAZINE, CARTRIDGE .................................................................. 1

2 PAOZZ 19204 7267851 ROD, GUIDE ASSEMBLY .................................................................. 2

3 PAOZZ 19204 7791229 SPRING, HELICAL COMPRESSION ................................................. 2

4 PAFFF 19204 7266342 BUFFER ASSEMBLY ......................................................................... 1

5 PAFZZ 19204 7267383 HANDLE, CHARGING ASSEMBLY ................................................... 1

6 PAFZZ 19204 7266409 SLIDE ................................................................................................. 1

7 AFOFF 19204 7266341 BOLT, ASSEMBLY (SEE FIG.3 FOR.................................................. 1

ASSEMBLY BREAKDOWN)

8 PACZZ 19204 7268393 GUIDE, BOLT RECEIVER ................................................................. 2

9 PACZZ 19204 7266415 SPRING, HELICAL COMPRESSION ................................................. 2

10 AFFFF 19204 7268119 FIRING MECHANISM ASSEMBLY (SEE............................................ 1

FIG.6 FOR ASSEMBLY BREAKDOWN)

11 PAFZZ 19204 7790871 REGULATOR, GAS ............................................................................ 1

12 PAFZZ 19205 7266831 NUT, PLAIN, WING ............................................................................ 1

13 PAFZZ 19204 7266330 NUT, PLAIN, ROUND ......................................................................... 1

14 PAFZZ 19204 7266833 BUSHING, REGULATOR ................................................................... 1

15 PAFZZ 19204 7790870 CYLINDER, GAS ................................................................................ 1

16 PAFFF 19204 7267859 ROD ASSEMBLY OPERATING ......................................................... 1

17 XCHHA 19204 7268255 RECEIVER AND BARREL ASSEMBLY ............................................. 1

END OF FIGURE

2-1
SECTION II TM 9-1015-221-34P

Figure 3. Bolt Assembly

(1) (2) (3) (4) (5) (6)
ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 0101 BOLT ASSEMBLY (7266341)

FIG.3 BOLT ASSEMBLY

1 PACZZ 19204 7266400 RETRACTOR, FIRING PIN ................................................................ 1

2 PACZZ 19204 7266374 PIN, FIRING ....................................................................................... 1

3 PACZZ 96906 MS16562-131 PIN, SPRING....................................................................................... 1

4 PACZZ 19204 7266357 EXTRACTOR, CARTRIDGE .............................................................. 1

5 PACZZ 19204 7266393 PLUNGER, EXTRACTOR .................................................................. 1

6 PACZZ 19204 7266416 SPRING, HELICAL COMPRESSION ................................................. 1

7 PAFZZ 19204 7266340 BOLT, BREECH ................................................................................. 1

END OF FIGURE

3-1
SECTION II TM 9-1015-221-34P

Figure 4. Buffer assembly

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 0102 BUFFER ASSEMBLY (7266342)

FIG.4 BUFFER ASSEMBLY

1 PAFZZ 19204 7790869 RIVET, SOLID .................................................................................... 2

2 PAFZZ 19204 7266353 DISK, BUFFER, BOLT SLIDE ............................................................ 1

3 XAFZZ 19204 7266344 BUSHING, BUFFER ........................................................................... 1

END OF FIGURE

4-1
SECTION II TM 9-1015-221-34P

Figure 5. Operating rod assembly.

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 0103 OPERATING ROD ASSEMBLY

(7267859)

FIG.5 OPERATING ROD ASSEMBLY

1 PAFZZ 96906 MS16562-109 PIN, SPRING ...................................................................................... 1

2 XAFZZ 19204 7266389 PISTON, GAS...................................................................................... 1

3 PAFZZ 19204 7266421 SPRING, HELICAL COMPRESSION ................................................. 2

4 PAFZZ 19204 7266501 PLUNGER, OPERATING ROD .......................................................... 1

5 XAFZZ 19204 7267852 ROD, OPERATING ............................................................................ 1

END OF FIGURE

5-1
SECTION II TM 9-1015-221-34P

Figure 6. Firing mechanism assembly.

SECTION II TM 9-1015-221-34P

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 0104 FIRING MECHANISM ASSEMBLY

(7268119)

FIG.6 FIRING MECHANISM ASSEMBLY

1 PACZZ 96906 MS24665-814 PIN, COTTER ..................................................................................... 6

2 PAFZZ 19204 7266497 PIN, SHOULDER HEADLESS ........................................................... 1

3 PAFZZ 19204 7266498 PIN, STRAIGHT, HEADED ................................................................ 1

4 PAFZZ 19204 7266348 CATCH, BUFFER ASSEMBLY .......................................................... 1

5 PAFZZ 19204 7266413 SPRING, HELICAL COMPRESSION.................................................. 1

6 PAFZZ 19204 7266377 PIN, STRAIGHT, HEADED ................................................................ 1

7 PAFZZ 19204 7266361 HAMMER, FIRING, SMALL................................................................. 1

8 PAFZZ 19205 7266417 SPRING, HELICAL TORSION ............................................................ 1

9 PAFZZ 19204 7266380 PIN, GROOVED, HEADED ................................................................ 3

10 PAFZZ 19204 7266408 SEAR .................................................................................................. 1

11 AFFFF 19204 7266500 SEAR RELEASE ASSEMBLY (SEE FIG.7.......................................... 1

FOR ASSEMBLY BREAKDOWN)

12 PAFZZ 19204 7266420 SPRING, HELICAL COMPRESSION ................................................. 1

13 PAFZZ 19204 7266366 HOUSING, FIRING CABLE................................................................. 1

14 PAOZZ 96906 MS16562-120 PIN, SPRING ...................................................................................... 1

15 PAOZZ 19204 7266561 ROD, FIRING ASSEMBLY ................................................................. 1

16 PAFHH 19204 7268118 HOUSING AND CATCH ASSEMBLY ................................................ 1

END OF FIGURE

6-1
SECTION II TM 9-1015-221-34P

Figure 7. Sear release assembly.

(1) (2) (3) (4) (5) (6)
ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 010401 SEAR RELEASE ASSEMBLY

(7266500)

FIG.7 SEAR RELEASE ASSEMBLY

1 PAFZZ 19204 7266386 PIN, STRAIGHT HEADLESS ............................................................. 1

2 PAFZZ 19204 7267838 RELEASE, SEAR ............................................................................... 1

3 PAFZZ 19204 7266422 SPRING, FLAT ................................................................................... 1

4 PAFZZ 19204 7266399 RETAINER, SEAR RELEASE ............................................................ 1

END OF FIGURE

7-1
SECTION II TM 9-1015-221-34P

Figure 8. Housing and catch assembly.

(1) (2) (3) (4) (5) (6)
ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 010402 HOUSING AND CATCH

ASSEMBLY (7268118)

FIG.8 HOUSING AND CATCH ASSEMBLY

1 PAFZZ 19204 7266379 PIN, STRAIGHT HEADLESS ............................................................. 1

2 PAFZZ 19204 7266388 PIN, SHOULDER HEADLESS ........................................................... 1

3 PAFZZ 19204 7266430 CATCH, MAGAZINE FRONT ASSEMBLY ......................................... 1

4 PAFZZ 19204 7266349 CATCH, MAGAZINE REAR ASSEMBLY ............................................ 1

5 PAFZZ 19205 7266419 SPRING, HELICAL EXTENSION ....................................................... 1

6 PAHZZ 19204 7266447 RIVET, SOLID ..................................................................................... 1

7 PAHZZ 19204 7266448 SAFETY, SPOTTING GUN ................................................................. 1

8 PAHZZ 19204 7266446 LOCK, GUN SAFETY ......................................................................... 1

9 XAFHH 19204 7268117 HOUSING ASSEMBLY ...................................................................... 1

END OF FIGURE

8-1
SECTION II TM 9-1015-221-34P

Figure 9. Receiver and barrel assembly.

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 0105 RECEIVER AND BARREL

ASSEMBLY (7268255)

FIG.9 RECEIVER AND BARREL ASSEMBLY

1 PAHHH 19204 7790489 BARREL ASSEMBLY, GUN ............................................................... 1

2 XAFFA 19204 7268254 RECEIVER ASSEMBLY ..................................................................... 1

END OF FIGURE

9-1
SECTION II TM 9-1015-221-34P

Figure 10. Receiver assembly.

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 010501 RECEIVER ASSEMBLY

(7268254)

FIG.10 RECEIVER ASSEMBLY

1 PAFZZ 19204 7266871 SCREW, CAP, SOCKET HEAD ......................................................... 6

2 PAFZZ 19204 7266367 LOCK BOLT ....................................................................................... 1

3 PAFZZ 19204 7266355 EJECTOR, CARTRIDGE ................................................................... 1

4 PAFZZ 96906 MS16562-134 PIN, SPRING ...................................................................................... 1

5 XAFDD 19204 7268253 RECEIVER ......................................................................................... 1

END OF FIGURE

10-1
SECTION II TM 9-1015-221-34P

Figure 11. Barrel assembly.

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 010502 BARREL. ASSEMBLY

(7790489)

FIG.11 BARREL ASSEMBLY

1 PAHZZ 19204 7266423 STOP, OPERATING ROD ................................................................. 1

2 PAFZZ 19204 7266849 KEY, MACHINE .................................................................................. 2

END OF FIGURE

11-1
SECTION II TM 9-1015-221-34P

Figure 12. Cannon, 106-mm: M206 and hinge assembly.

SECTION II TM 9-1015-221-34P

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 04 CANNON, 106-MM: M206

(11578014) AND
GROUP 0405 HINGE ASSEMBLY (7308856)

FIG.12 CANNON, 106-MM: M206 AND

HINGE ASSEMBLY

1 PAOZZ 96906 MS16998-50 SCREW, CAP, SOCKET HEAD ......................................................... 2

2 AOOOO 19206 7307520 LEVER, BREECHBLOCK OPERATING (SEE.................................... 1

FIG.17 FOR ASSEMBLY BREAKDOWN)

3 PACZZ 96906 MS35756-6 KEY, WOODRUFF .............................................................................. 1

4 PAOFF 19206 8766017 DOG ASSEMBLY ............................................................................... 1

5 PACOO 19206 7230797 DETENT ASSEMBLY ......................................................................... 1

6 PAFZZ 19206 7230796 CAP .................................................................................................... 1

7 PAOZZ 19206 8766068 HOUSING ........................................................................................... 1

8 PACZZ 19206 11578018 PIN, FIRING, ...................................................................................... 1

9 PACZZ 19206 7230810 SPRING, HELICAL, COMPRESSION ................................................ 1

10 PAFZZ 19206 7230806 SPACER, PLATE ............................................................................... 1

11 PACZZ 19206 7230807 ROLLER, BEARING ........................................................................... 2

12 PAFZZ 19206 7308853 PLATE CAM ....................................................................................... 1

13 PACZZ 19206 11578017 CAM, CONTROL ................................................................................. 1

14 PACZZ 19206 7230799 EXTRACTOR, CARTRIDGE ............................................................... 1

15 PAOZZ 19206 11578301 PLUNGER, DETENT .......................................................................... 1

16 PAOZZ 19206 7230809 SPRING, HELICAL COMPRESSION ................................................. 1

17 PACZZ 19206 11578019 SEAR .................................................................................................. 1

18 PAFFF 19206 7308856 HINGE ASSEMBLY ............................................................................ 1

19 PAFZZ 96906 MS16562-127 ..PIN, SPRING .................................................................................. 1

20 XAFZZ 19206 7308854 ..HINGE BODY ................................................................................. 1

END OF FIGURE
12-1
SECTION II TM 9-1015-221-34P

Figure 13. Cannon, 106-mm: M206 and vent assembly.

SECTION II TM 9-1015-221-34P

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 04 CANNON, 106-MM: M206

(11578014) AND
GROUP 0406 VENT ASSEMBLY (7309187)

FIG.13 CANNON, 106-MM: M206 AND

VENT ASSEMBLY

1 PAOZZ 96906 MS16998-50 SCREW, CAP, SOCKET HEAD ......................................................... 4

2 PAOZZ 96906 MS16998-74 SCREW, CAP, SOCKET HEAD . ........................................................ 2

3 PAFZZ 19206 7307519 BRACKET LEFT ................................................................................. 1

4 PAOZZ 96906 MS16998-47 SCREW, CAP, SOCKET HEAD ......................................................... 1

5 PAOZZ 19203 9406768 SCREW, CAP, SOCKET HEAD ......................................................... 1

6 PAFZZ 19206 7307517 BRACKET, RIGHT ............................................................................. 1

7 PAOOO 19206 7307472 ROD LANYARD ASSEMBLY ............................................................. 1

8 PAOZZ 19206 7307503 COVER TRIGGER ............................................................................. 1

9 PAOZZ 96906 MS16562-49 PIN, SPRING ...................................................................................... 1

10 FAOZZ 19206 11578016 SPRING, HELICAL TORSION ........................................................... 1

11 PAOZZ 19206 11578015 TRIGGER ........................................................................................... 1

12 PAOZZ 96906 MS16998-45 SCREW, CAP, SOCKET HEAD ......................................................... 4

13 PAOZZ 19206 7307502 HOUSING, TRIGGER ........................................................................ 1

14 PAFZZ 19206 7308861 BLOCK HINGE ................................................................................... 1

15 PAOOO 19206 7309187 VENT ASSEMBLY............................................................................... 1

16 PAOZZ 19206 7309107 SETSCREW ........................................................................................ 1

17 XAFDD 19206 7309749 BARREL ASSEMBLY ......................................................................... 1

END OF FIGURE

13-1
SECTION II TM 9-1015-221-34P

Figure 14. Cannon, 106-mm: M206.

SECTION II TM 9-1015-221-34P

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 04 CANNON, 106-MM: M206

(11578014)

FIG.14 CANNON, 106-MM: M206

1 PAFZZ 19206 7307494 RING, EXTERNALLY THREADED .................................................... 1

2 PAFZZ 19206 7307493 WASHER, SPRING TENSION ........................................................... 1

3 PAFZZ 19206 7309208 PAD, SPOTTING GUN ALIGNING .................................................... 1

4 PAFZZ 96906 MS16562-62 PIN, SPRING ...................................................................................... 1

5 PAFZZ 19206 7307514 CAM, SPOTTING GUN ...................................................................... 2

6 PAFZZ 19206 7307498 WASHER, SPRING TENSION ........................................................... 2

7 PAFZZ 19206 7307497 SPRING CAM ..................................................................................... 7

8 PAFZZ 19206 7307496 SPRING CAM ..................................................................................... 1

9 PAFZZ 19206 7307495 BEARING, SLEEVE ........................................................................... 1

10 PAOZZ 96906 MS16997-58 SCREW, CAP, SOCKET HEAD ......................................................... 3

11 PAOZZ 19206 7307512 COVER, QUICK BREAKDOWN ......................................................... 1

12 PAFZZ 96906 MS16562-48 PIN, SPRING ...................................................................................... 3

13 PAFZZ 19206 7307490 LEVER CABLE OPERATING ............................................................. 1

14 PAFZZ 19206 7307513 LEVER CABLE OPERATING ............................................................. 1

15 PAOZZ 19206 7307478 SETSCREW ....................................................................................... 2

16 PAOZZ 19206 11578002 CABLE 50 CALIBER SPOTTING GUN .............................................. 1

17 PAOZZ 19206 11577981 CABLE, FIRING, 106MM RECOILLESS ............................................. 1

RIFLE

END OF FIGURE

14-1
SECTION II TM 9-1015-221-34P

Figure 15. Detent assembly, cartridge case.

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 0401 DETENT ASSEMBLY,

CARTRIDGE CASE (7230797)

FIG.15 DETENT ASSEMBLY,

CARTRIDGE CASE

1 PAOZZ 19206 7230800 FULCRUM .......................................................................................... 1

2 PAOZZ 19206 11578301 PLUNGER, DETENT .......................................................................... 1

3 PACZZ 19206 7230809 SPRING, HELICAL COMPRESSION ................................................. 1

4 XAOZZ 19204 7230794 BODY, CARTRIDGE, CASE .............................................................. 1

END OF FIGURE

15-1
SECTION II TM 9-1015-221-34P

Figure 16. Dog assembly.

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 0402 DOG ASSEMBLY (8766017)

FIG. 16 DOG ASSEMBLY

1 PAFZZ 96906 MS16562-100 PIN, SPRING....................................................................................... 1

2 PAFZZ 19206 8766016 ROLLER, DOG ASSEMBLY ............................................................... 1

3 XAFZZ 19206 8766015 DOG ................................................................................................... 1

END OF FIGURE

16-1
SECTION II TM 9-1015-221-34P

Figure 17. Breechblock operating lever.

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 0403 BREECHBLOCK OPERATING

LEVER (7307520)

FIG.17 BREECHBLOCK OPERATING LEVER

1 PAOZZ 19206 7307477 BALL BREECH BLOCK ...................................................................... 1

2 PAOZZ 88044 AN565D820H6 SETSCREW ....................................................................................... 1

3 PACZZ 96906 MS35756-6 KEY, WOODRUFF ............................................................................. 1

4 PAOZZ 96906 MS16626-1050 RING, RETAINING ............................................................................. 1

5 PAOZZ 19206 8767165 PIN, GROOVED, HEADED ................................................................ 1

6 PAOZZ 19206 7307476 PIN, STRAIGHT HEADLESS ............................................................. 1

7 PAOZZ 19206 7307509 PIN, GROOVED, HEADED ................................................................ 1

8 PAOZZ 19206 7307475 SPRING, HELICAL COMPRESSION ................................................. 1

9 PAOZZ 96906 MS19061-13 BALL, BEARING ................................................................................. 1

10 PAOZZ 19206 7307484 CAM, CONTROL ................................................................................ 1

11 PAOZZ 19206 7307523 BODY, BREECHBLOCK .................................................................... 1

END OF FIGURE
17-1
SECTION II TM 9-1015-221-34P

Figure 18. Lanyard rod assembly.

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 0404 LANYARD ROD ASSEMBLY

(7307472)

FIG.18 LANYARD ROD ASSEMBLY

1 PAOZZ 96906 MS16562-141 PIN, SPRING ...................................................................................... 1

2 XAOZZ 19206 7307485 BODY ................................................................................................. 1

END OF FIGURE

18-1
SECTION II TM 9-1015-221-34P

Figure 19. Mount, rifle, 106-mm: M79

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 05 MOUNT, RIFLE, 106-MM: M79

(8403200)

FIG.19 MOUNT, RIFLE, 106-MM: M79

1 AFFFF 19204 8403260 ELEVATING AND FIRING ASSEMBLY (SEE..................................... 1

FIGS.20 & 21 FOR ASSEMBLY BREAKDOWN)

2 XAFDD 19204 8403250 TRAVERSING ASSEMBLY (SEE FIG.23 FOR................................... 1

ASSEMBLY BREAKDOWN)

3 AFFFF 19206 8403161 BASE ASSEMBLY (SEE FIGS. 25 & 26............................................. 1

FOR ASSEMBLY BREAKDOWN)
UOC:J80

4 PAFZZ 96906 MS24629-23 SCREW, TAPPING THREAD ............................................................ 2

5 PAFZZ 19206 11578397 PLATE, IDENTIFICATION ................................................................. 1

END OF FIGURE
19-1
SECTION II TM 9-1015-221-34P

Figure 20. Elevating and firing assembly.

SECTION II TM 9-1015-221-34P

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 0501 AND 0601 ELEVATING AND

FIRING ASSEMBLY (8403260)

FIG.20 ELEVATING AND FIRING ASSEMBLY

1 PAFZZ 96906 MS16998-45 SCREW, CAP, SOCKET HEAD ......................................................... 4

2 PAFZZ 96906 MS35338-63 WASHER, LOCK ................................................................................ 4

3 PAFZZ 19206 8403194 HOUSING FIRING TRANSFER ......................................................... 1

4 PAFZZ 19206 11578302 WASHER, FLAT ................................................................................. 1

5 PAFZZ 19206 8403186 LEVER, FIRING TRANSFER ............................................................. 1

6 PAFZZ 19206 8403185 TANG, FIRING TRANSFER ............................................................... 1

7 PAFZZ 19206 8403188 SPRING, HELICAL COMPRESSION ................................................. 1

8 PAFZZ 19200 8403189 PIN, STRAIGHT HEADLESS .............................................................. 1

9 PAFZZ 96906 MS90726-33 BOLT, MACHINE ................................................................................ 6

10 PAFZZ 96906 MS35338-45 WASHER, LOCK ................................................................................ 6

11 PAFZZ 96906 MS35756-6 KEY, WOODRUFF ............................................................................. 1

12 PAFZZ 96906 MS19068-082 NUT, PLAIN, ROUND ......................................................................... 1

13 PAFZZ 96906 MS19070-082 WASHER, KEY ................................................................................... 1

14 PAFZZ 19200 8403025 WASHER, FLAT ................................................................................. 1

15 AFFFF 19204 8403193 CRADLE, ELEVATING ASSEMBLY (SEE.......................................... 1

FIG.22 FOR ASSEMBLY BREAKDOWN)

16 PAFZZ 96906 MS35207-263 SCREW, MACHINE ........................................................................... 3

17 PAFZZ 96906 MS35338-62 WASHER, LOCK SPRING ................................................................. 3

18 PAFZZ 19206 11578254 HOUSING ASSEMBLY, FIRING ........................................................ 1

END OF FIGURE

20-1
SECTION II TM 9-1015-221-34P

Figure 21. Elevating and firing assembly and planetary gear assembly
SECTION II TM 9-1015-221-34P

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 0501 & 0601 ELEVATING AND

FIRING ASSEMBLY (8403260) AND
GROUP 050102 AND 060102 PLANETARY
GEAR ASSEMBLY (8403270)

FIG.21 ELEVATING AND FIRING

ASSEMBLY AND PLANETARY GEAR
ASSEMBLY

1 PAFZZ 96906 MS16562-24 PIN, SPRING ...................................................................................... 1

2 PAFZZ 19206 11578253 SHAFT, FIRING ASSEMBLY ............................................................. 1

3 PAFZZ 19206 11578250 SPACER, SLEEVE ............................................................................. 1

4 PAFZZ 96906 MS24585-1314 SPRING, HELICAL COMPRESSION ................................................. 1

5 PAFZZ 19206 11578249 SPACER, SLEEVE ............................................................................. 1

6 PAFZZ 96906 MS51964-51 SETSCREW ....................................................................................... 1

7 PAFZZ 19206 8403274 NUT, PLAIN, ROUND ......................................................................... 1

8 PAFZZ 96906 MS16625-1100 RING, RETAINING ............................................................................. 1

9 PAFZZ 19206 11579632 SEAL, PLAIN ENCASED .................................................................... 1

10 PAFZZ 19206 8403277 HANDWHEEL ASSEMBLY ................................................................ 1

11 PAFZZ 96906 MS35756-12 KEY, WOODRUFF ............................................................................. 1

12 PAFZZ 19206 11579631 SEAL, PLAIN ENCASED .................................................................... 1

13 PAFZZ 19206 8403262 COVER ELEVATING .......................................................................... 1

14 PAFZZ 79410 B107A BEARING, BALL, ANNULAR ............................................................. 1

15 PAFZZ 19206 8403261 HOUSING, ELEVATING ..................................................................... 1

16 PAFFF 19206 8403270 GEAR, PLANETARY ASSEMBLY ...................................................... 1

17 PAFZZ 19206 11578875 ..BEARING, SLEEVE ......................................................................... 1

END OF FIGURE
21-1
SECTION II TM 9-1015-221-34P

Figure 22. Elevating cradle assembly.

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 050101 AND 060101 ELEVATING

CRADLE ASSEMBLY (8403193)

FIG.22 ELEVATING CRADLE ASSEMBLY

1 PAFZZ 96906 MS16562-50 PIN, SPRING ...................................................................................... 1

2 PAFZZ 19206 8766848 YOKE, LOCKING ............................................................................... 1

3 PAFZZ 19200 8403192 NUT, PLAIN, ROUND ......................................................................... 1

4 PAFZZ 19206 8403187 BOLT, MACHINE ................................................................................ 1

5 PAFZZ 19206 8403195 SUPPORT, ELEVATING AND FIRING .............................................. 1

END OF FIGURE

22-1
SECTION II TM 9-1015-221-34P

Figure 23. Traversing assembly and shaft assembly.

SECTION II TM 9-1015-221-34P

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY
GROUP 0502 AND 0602 TRAVERSING
ASSEMBLY (8403250) AND
GROUP 050201 AND 060201 SHAFT
ASSEMBLY (8413117)

FIG.23 TRAVERSING ASSEMBLY

AND SHAFT ASSEMBLY

1 PAFFF 19206 8413117 SHAFT ASSEMBLY ........................................................................... 1

2 PAFZZ 96906 MS16562-43 PIN, SPRING ...................................................................................... 1

3 PAFZZ 96906 MS51964-51 SETSCREW ....................................................................................... 1

4 PAFZZ 19206 8403353 NUT, PLAIN, ROUND ......................................................................... 1

5 PAFZZ 19206 8403329 HANDWHEEL ASSEMBLY ................................................................ 1

6 PAFZZ 96906 MS35756-12 KEY, WOODRUFF ............................................................................. 1

7 PAFZZ 96906 MS90726-33 BOLT, MACHINE ................................................................................ 8

8 PAFZZ 96906 MS35338-45 WASHER, LOCK ................................................................................ 8

9 AFFFF 19206 8403259 DRIVE ASSEMBLY, TRAVERSE (SEE............................................... 1

FIG.24 FOR ASSEMBLY BREAKDOWN)

10 PAFZZ 96906 MS28775-112 PACKING, PREFORMED .................................................................. 1

11 PAFZZ 96906 MS35191-272 SCREW, MACHINE ........................................................................... 8

12 PAFZZ 19206 8403027 PLATE TRAVERSE LOCK ................................................................. 1

13 PAFZZ 19206 8403028 SPRING, HELICAL COMPRESSION ................................................. 8

14 PAFZZ 19206 8403029 SPACER, RING .................................................................................. 1

15 PAFZZ 19206 8403026 LOCK TRAVERSE ............................................................................. 8

16 PAFZZ 19206 8403000 PLATE, LOCK, TRAVERSE ............................................................... 1

17 PAFZZ 19206 11579630 BEARING, ROLLER, TAPERED ........................................................ 1

18 PAFZZ 88044 AN565E624H16 SETSCREW ....................................................................................... 6

19 PAFZZ 96906 MS16998-59 SCREW, CAP, SOCKET HEAD ......................................................... 6

20 PAFZZ 19206 8403005 PLATE, BOTTOM, TRAVERSE ......................................................... 1

21 PAFZZ 19200 8403010 SPACER, RING .................................................................................. 1

22 PAFZZ 19206 8403009 BEARING, BALL, THRUST ................................................................ 1

23-1
SECTION II TM 9-1015-221-34P

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

23 PAFZZ 96906 MS15003-1 FITTING, LUBRICATION ................................................................... 1

24 PAFZZ 19206 8403023 BEARING, SLEEVE ........................................................................... 1

25 PAFZZ 19200 8403031 SPACER, RING .................................................................................. 1

26 XAFZZ 19200 8403136 YOKE................................................................................................... 1

END OF FIGURE

23-2
SECTION II TM 9-1015-221-34P

Figure 24. Traversing drive assembly.

SECTION II TM 9-1015-221-34P

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY
GROUP 050202 AND 060202 TRAVERSING
DRIVE ASSEMBLY (8403259)

FIG.24 TRAVERSING DRIVE ASSEMBLY

1 PAFZZ 96906 MS15001-1 FITTING, LUBRICATION ................................................................... 1

2 PAFZZ 96906 MS90726-6 SCREW, CAP, HEXAGON HEAD....................................................... 8

3 PAFZZ 96906 MS35338-63 WASHER, LOCK ............................................................................... 16

4 PAFZZ 19206 8403252 COVER TRAVERSE DRIVE .............................................................. 1

5 PAFZZ 19206 8403333 SHIM ................................................................................................... 1

6 PAFZZ 96906 MS90726-5 SCREW, CAP, HEXAGON HEAD ...................................................... 8

7 PAFZZ 19206 8403253 RING, BEARING, OUTER................................................................... 1

8 PAFZZ 19206 11579631 SEAL, PLAIN ENCASED .................................................................... 1

9 PAFZZ 96906 MS19059-1638 BALL, BEARING.................................................................................. 9

10 PAFZZ 96906 MS16628-1112 RING, RETAINING ............................................................................. 1

11 PAFZZ 19206 8403254 RING, BEARING, INNER ................................................................... 1

12 PAFZZ 96906 MS35756-9 KEY, WOODRUFF ............................................................................. 1

13 PAFZZ 19206 8403251 ARBOR TRAVERSE DRIVE .............................................................. 1

14 PAFZZ 19206 8403257 RING, BEARING, OUTER .................................................................. 1

15 PAFZZ 19206 8403258 SLEEVE, TRAVERSE DRIVE ............................................................. 1

16 PAFZZ 96906 MS19059-1012 BALL, BEARING ................................................................................ 79

17 PAFZZ 19206 8403255 RING, CLAMP, TRAVERSE ............................................................... 1

END OF FIGURE

24-1
SECTION II TM 9-1015-221-34P

Figure 25. Base assembly (front arm and parts).

SECTION II TM 9-1015-221-34P

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 0503 BASE ASSEMBLY

(FRONT ARM AND PARTS) (8403161)

FIG.25 BASE ASSEMBLY

(FRONT ARM AND PARTS)
1 PAFZZ 96906 MS16998-58 SCREW, CAP, SOCKET HEAD ......................................................... 6
UOC:J80
2 PAFZZ 96906 MS35338-45 WASHER, LOCK ................................................................................ 8
UOC:J80
3 PAFZZ 19206 8403054 TRUNNION, BASE ............................................................................. 1
UOC:J80
4 PAFZZ 19206 8403087 SHIM .015 .......................................................................................... 1
UOC:J80
5 PAFZZ 19206 8403086 SHIM .010 .......................................................................................... 1
UOC:J80
6 PAFZZ 96906 MS35650-302 NUT, PLAIN, HEXAGON .................................................................... 2
UOC:J80
7 PAFZZ 96906 MS51974-38 SETSCREW ....................................................................................... 2
UOC:J80
8 PAFZZ 19206 8403060 LEVER ASSEMBLY, BASE LOCK ...................................................... 1
UOC:J80
9 PAFZZ 96906 MS16998-61 SCREW, CAP, SOCKET HEAD ......................................................... 2
UOC:J80
10 PAFZZ 19206 8403056 CAP, BASE LOCKING ....................................................................... 1
UOC:J80
11 PAFZZ 19206 8403243 ECCENTRIC BASE ARM ................................................................... 1
UOC:J80
12 PAFZZ 19206 8403242 ECCENTRIC BASE ARM ................................................................... 1
UOC:J80
13 PAFZZ 19205 8403061 KEY, BASE LOCKING ........................................................................ 1
UOC:J80
14 PAFZZ 96906 MS51968-3 NUT, PLAIN, HEXAGON .................................................................... 4
UOC:J80
15 PAFZZ 96906 MS51964-70 SETSCREW ....................................................................................... 4
UOC:J80
16 PAFZZ 96906 MS35426-31 NUT, PLAIN, WING ............................................................................ 2
UOC:J80
17 PAFZZ 96906 MS35333-42 WASHER, LOCK ................................................................................ 2
UOC:J80
18 PAFZZ 19206 11579601 HOOK, SCREW ................................................................................. 1
UOC:J80
19 PAFZZ 96906 MS24665-359 PIN, COTTER ..................................................................................... 2
UOC:J80
20 PAFZZ 96906 MS35692-61 NUT, PLAIN, SLOTTED HEAD .......................................................... 2
UOC:J80
21 PAFZZ 19206 8403064 STUD, PLAIN ..................................................................................... 1
UOC:J80
22 PAFZZ 19206 8403062 SPACER, SLEEVE ............................................................................. 1
UOC:J80
23 PAFZZ 19206 8403063 WHEEL ............................................................................................... 1
UOC:J80
25-1
SECTION II TM9-1015-221-34P

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

24 PAFZZ 19206 8403090 ARM ASSEMBLY, FRONT BASE ...................................................... 1

UOC:J80

END OF FIGURE

25-2
SECTION II TM 9-1015-221-34P

Figure 26. Base assembly (rear arms and parts).

SECTION II TM 9-1015-221-34P

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 0503 BASE ASSEMBLY

(REAR ARMS AND PARTS) (8403161)

FIG.26 BASE ASSEMBLY

(REAR ARMS AND PARTS)
1 PAFZZ 96906 MS51974-38 SETSCREW ....................................................................................... 4
UOC:J80
2 PAFZZ 96906 MS51968-9 NUT, PLAIN, HEXAGON .................................................................... 2
UOC:J80
3 PAFZZ 96906 MS35338-46 WASHER, LOCK ................................................................................ 3
UOC:J80
4 PAFZZ 96906 MS16562-132 PIN, SPRING ...................................................................................... 2
UOC:J80
5 PAFZZ 19206 8403048 PIN, BASE HANDLE SUPPORT ........................................................ 2
UOC:J80
6 PAFZZ 19200 8403073 PIN, STRAIGHT, HEADED ................................................................ 2
UOC:J80
7 PAFZZ 19200 8403071 PIN, STRAIGHT HEADLESS ............................................................. 2
UOC:J80
8 PAFZZ 19200 8403072 PIN, STRAIGHT, HEADED ................................................................ 2
UOC:J80
9 PAFZZ 19206 8403045 CLAMP, LH BASE .............................................................................. 1
UOC:J80
10 PAFZZ 19206 8403070 HANDLE ASSEMBLY, LH BASE ........................................................ 1
UOC:J80
11 PAFZZ 19206 8403096 ARM ASSEMBLY, REAR LEFT ......................................................... 1
UOC:J80
12 PAFZZ 19206 8403044 CLAMP, RH BASE ............................................................................. 1
UOC:J80
13 PAFZZ 19206 8403069 HANDLE ASSEMBLY, RH BASE ....................................................... 1
UOC:J80
14 PAFZZ 19206 8403093 ARM ASSEMBLY, REAR RIGHT ....................................................... 1
UOC:J80

END OF FIGURE

26-1
SECTION II TM 9-1015-221-34P

Figure 27. Mount, rifle, 106-mm: M92.

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 06 MOUNT, RIFLE, 106-MM: M92

(8407830)

FIG. 27 MOUNT, RIFLE, 106-MM: M92

1 AFFFF 19204 8403260 ELEVATING AND FIRING ASSEMBLY (SEE..................................... 1

FIGS. 20 & 21 FOR ASSEMBLY
BREAKDOWN)

2 XAFDD 19204 8403250 TRAVERSING ASSEMBLY (SEE FIG. 23 ......................................... 1

FOR ASSEMBLY BREAKDOWN)

3 PAFFF 19206 8407836 ADAPTER, RIFLE MOUNT ASSEMBLY ............................................ 1

UOC:J81

4 PAFZZ 96906 MS24629-23 SCREW, TAPPING THREAD ............................................................ 2

5 PAFZZ 19206 11578397 PLATE, IDENTIFICATION ................................................................. 1

END OF FIGURE

27-1
SECTION II TM 9-1015-221-34P

Figure 28. Rifle mount adapter assembly and collar and pin assembly.
(1) (2) (3) (4) (5) (6)
ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 0603 RIFLE MOUNT ADAPTER

ASSEMBLY (8407836) AND
GROUP 060301 COLLAR AND PIN ASSEMBLY
(8407817)

FIG.28 RIFLE MOUNT ADAPTER ASSEMBLY

AND COLLAR AND PIN ASSEMBLY
1 PAFZZ 96906 MS16998-60 SCREW, CAP, SOCKET HEAD ......................................................... 6
UOC:J81
2 PAFZZ 19204 8407831 LATCH, ADAPTER ............................................................................. 3
UOC:J81
3 AFFFF 19204 8407817 COLLAR AND PIN ASSEMBLY ......................................................... 1
UOC: J81
4 PAFZZ 96906 MS16562-127 ..PIN, SPRING .................................................................................... 1
UOC:J81
5 PAFZZ 19204 8407816 ..COLLAR, LATCH ASSEMBLY ......................................................... 1
UOC:J81
6 PAFZZ 96906 MS35671-55 PIN, GROOVED HEADLESS ............................................................. 1
UOC: J81
7 PAFZZ 19206 11577210 CAPSTAN ASSEMBLY ...................................................................... 1
UOC: J81
8 XAFZZ 19204 8407835 PLATE AND GUIDE ASSEMBLY........................................................ 1
UOC:J81
END OF FIGURE
28-1
SECTION II TM 9-1015-221-34P

Figure 29. Tripod, rifle mount; M27.

SECTION II TM 9-1015-221-34P

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 07 TRIPOD, RIFLE MOUNT: M27

(8407810)

FIG.29 TRIPOD, RIFLE MOUNT: M27

1 PAFZZ 96906 MS21318-27 SCREW, DRIVE ................................................................................. 4
UOC:J81
2 PAFZZ 19206 11577713 PLATE IDENTIFICATION .................................................................. 1
UOC:J81
3 PAFZZ 21450 586127 PIN, SPRING ...................................................................................... 2
UOC:J81
4 PAFZZ 19204 8407812 SPRING, HELICAL, COMPRESSION ................................................ 2
UOC:J81
5 PAFZZ 19204 8407811 PIN, SHOULDER HEADLESS ........................................................... 2
UOC:J81
6 PAFZZ 19200 8407815 KEY, MACHINE .................................................................................. 2
UOC:J81
7 XAFZZ 19200 8407814 BUTTON ............................................................................................. 2
UOC:J81
8 PAFZZ 19204 8407813 PIN, HOLLOW .................................................................................... 2
UOC:J81
9 XAFZZ 19204 8407828 LEG .................................................................................................... 2
UOC:J81
10 PAFZZ 96906 MS90727-72 SCREW, CAP, HEXAGON HEAD ...................................................... 6
UOC:J81
11 PAFZZ 96906 MS35333-42 WASHER, LOCK ................................................................................ 6
UOC:J81
12 XAFZZ 19200 8407832 RING ................................................................................................... 1
UOC:J81
13 XAFZZ 19200 8407834 RING ................................................................................................... 1
UOC:J81
14 XAFZZ 19200 8407829 LEG .................................................................................................... 1
UOC:J81
15 XAFZZ 19200 8407833 RING ................................................................................................... 1
UOC:J81

END OF FIGURE

29-1
SECTION II TM 9-1015-221-34P

Figure 30. Gun, subcaliber caliber .30: M9 and door assembly.

SECTION II TM 9-1015-221-34P

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 09 GUN, SUBCALIBER CALIBER

.30: M9 (7307568) AND
GROUP 0901 DOOR ASSEMBLY (11577244)

FIG.30 GUN, SUBCALIBER CALIBER .30:

M9 AND DOOR ASSEMBLY

1 XAFZZ 96906 MS51922-53 NUT, SELF-LOCKING, HEAD ............................................................ 1

UOC:M63
2 XAFZZ 96906 MS35691-1022 NUT, PLAIN, HEXAGON .................................................................... 1
UOC:M63
3 PAFZZ 96906 MS16562-49 PIN, SPRING ...................................................................................... 1
UOC:M63
4 XAFZZ 19204 7309726 BARREL ............................................................................................. 1
UOC:M63
5 XAFZZ 19204 7307553 BUSHING BREECH ........................................................................... 1
UOC:M63
6 PAFZZ 96906 MS16562-47 PIN, SPRING ...................................................................................... 1
UOC:M63
7 XAFZZ 19204 7307567 PIN ...................................................................................................... 1
UOC:M63
8 PAFFF 19206 11577244 DOOR ASSEMBLY ............................................................................ 1
UOC:M63
9 PAFZZ 96906 MS16625-1037 ..RING, RETAINING ........................................................................... 1
UOC:M63
10 PAFZZ 19206 11577242 ..PIN, FIRING ..................................................................................... 1
UOC:M63
11 XAFZZ 19206 11577243 ..DOOR BODY .................................................................................... 1
UOC:M63
12 XAFZZ 19204 7309725 MUZZLE, NOSE ................................................................................. 1
UOC:M63
13 XAFZZ 19204 7307559 CASE, SHELL .................................................................................... 1
UOC: M63

END OF FIGURE

30-1
SECTION II TM 9-1015-221-34P

Figure 31. Venturi wrench.

SECTION II TM 9-1015-221-34P

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 12 VENTURI WRENCH (7309119)

FIG.31 VENTURI WRENCH

1 PAHZZ 19206 7306689 LOCK .................................................................................................. 4

2 PAHZZ 96906 MS51967-15 NUT, PLAIN, HEXAGON .................................................................... 1

3 PAHZZ 19206 7309114 KEEPER ASSEMBLY ......................................................................... 1

4 PAHZZ 19206 11579321 NUT, PLAIN, HEXAGON .................................................................... 1

5 PAHZZ 96906 MS27183-27 WASHER, FLAT ................................................................................. 1

6 PAHZZ 19206 7305409 WASHER, SHOULDERED ................................................................. 1

7 PAHZZ 19206 7305402 SPRING, HELICAL COMPRESSION ................................................. 1

8 PAHZZ 19206 7305413 HANDLE ............................................................................................. 1

9 PAHZZ 19206 7309115 PLATE ASSEMBLY ............................................................................ 1

10 PAHZZ 96906 MS35206-228 SCREW, MACHINE ........................................................................... 1

11 PAHZZ 19206 7305405 RING, CONNECTING, ROUND ......................................................... 1

12 PAHZZ 81348 RR-C-271 CHAIN, WELDLESS ........................................................................... 1

13 PAHZZ 19206 7305400 PIN, STRAIGHT, HEADED ................................................................ 1

14 PAHZZ 96906 MS51981-40 SETSCREW ....................................................................................... 1

15 PAHZZ 19206 7305399 PIN, GROOVED HEADLESS ............................................................. 1

16 PAHZZ 96906 MS51967-30 NUT, PLAIN, HEXAGON .................................................................... 4

17 PAHZZ 96906 MS35338-72 WASHER, LOCK ................................................................................ 4

18 PAHZZ 96906 MS18154-214 SCREW, CAP, HEXAGON HEAD ...................................................... 4

END OF FIGURE

31-1
SECTION II TM 9-1015-221-34P

Figure 32. Artillery cleaning brush.

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 13 ARTILLERY CLEANING BRUSH

(8766039)

FIG.32 ARTILLERY CLEANING BRUSH

1 PAOZZ 96906 MS51967-2 NUT, PLAIN, HEXAGON .................................................................... 3

2 PAOZZ 96906 MS35338-63 WASHER, LOCK ................................................................................ 3

3 PAOZZ 96906 MS90728-16 SCREW, CAP, HEXAGON HEAD ...................................................... 3

4 PAOZZ 96906 MS27183-10 WASHER, FLAT ................................................................................. 3

5 PAOZZ 96906 MS16562-42 PIN, SPRING ...................................................................................... 1

6 PAOZZ 19206 8766029 ADAPTER, BORE BRUSH ................................................................. 1

7 PAOZZ 19206 8766031 BOLT BLANK ..................................................................................... 1

8 PAOZZ 96906 MS27183-18 WASHER, FLAT ................................................................................. 2

9 PAOZZ 19206 8766038 CAP, END............................................................................................ 2

10 PAOZZ 19207 6157208 BRUSH SECTION .............................................................................. 1

END OF FIGURE

32-1
SECTION II TM 9-1015-221-34P

Section III. SPECIAL TOOLS LIST

Figure 33. Special tools.

SECTION II TM 9-1015-221-34P

(1) (2) (3) (4) (5) (6)

ITEM SMR PART
NO CODE FSCM NUMBER DESCRIPTION AND USABLE ON CODE (UOC) QTY

GROUP 9500 SPECIAL TOOLS

FIG. 33 SPECIAL TOOLS

ADFFA 19204 5910378 TOOL AND GAGE KIT, MAINTENANCE

RIFLE, 106-MM, M40A2 AND M40A4 BOI:
1 PER SUPPORTING DSU/GSU ........................................................

1 PAFZZ 19206 11577693 ..ALIGNING TOOL, CAM ....................................................................

2 PAOZZ 50024 2479141 ..HANDLE, SOCKET WRENCH -T- SLIDING
3/4 DRIVE 18-1/2 O/A LG ...................................................................
3 PAFZZ 19205 7799716 ..GAGE, HEAD SPACE ........................................................................
4 PAFZZ 81349 MIL-T-11752 ..TENSION HANDLE, STEEL MEASURING
TAPE SURVEYORS O TO 30 LB
GRADUATIONS, 1/2 LB SMALLEST
INCREMENT .......................................................................................
5 PAOZZ 19206 7307536 ..TOOL, FIRING CABLE ......................................................................

6 PAOZZ 19206 7309111 ..TOOL, RECOIL, COMPENSATING RING

ADJUSTING ........................................................................................
7 PACZZ 19206 7307537 ..WRENCH, SPOTTING GUN ADJUSTING .......................................
8 PAFZZ 19205 7319944 GAGE, HEADSPACE CALIBER .30 BOI:
1 PER SUPPORTING DSU/GSU .........................................................

9 PAHHH 19206 7309119 WRENCH, VENTURI BOI: 1 PER

SUPPORTING GS UNIT .....................................................................

END OF FIGURE

33-1
SECTION IV TM9-1015-221-34P

Section IV. NATIONAL STOCK NUMBER AND PART NUMBER INDEX

STOCK NUMBER FIG. ITEM STOCK NUMBER FIG. ITEM

1015-00-004-2318 12 15 1015-00-219-8148 24 4
15 2 3110-00-219-8149 24 7
5310-00-013-1074 31 17 3110-00-219-8150 24 11
5315-00-013-7137 6 1 1015-00-219-8151 24 17
5315-00-013-7214 25 19 3110-00-219-8153 24 14
5310-00-021-7216 31 4 1015-00-219-8154 24 15
1005-00-047-3861 14 3 1015-00-219-8156 21 15
5315-00-049-5240 29 5 1015-00-219-8157 21 13
5350-00-049-5241 29 4 5310-00-219-8159 21 7
1015-00-049-5242 28 5 1015-00-219-8161 21 10
1015-00-049-5244 28 2 1015-00-219-8165 23 5
1015-00-049-5246 27 3 5365-00-219-8166 24 5
4730-00-050-4203 24 1 5310-00-219-8177 23 4
4730-00-050-4208 23 23 1015-00-219-8178 21 16
5315-00-051-8636 6 14 5306-00-225-9088 20 9
5315-00-051-8637 5 1 23 7
5315-00-052-6697 18 1 5315-00-226-2670 31 13
5305-00-052-8251 12 1 5315-00-240-1008 32 5
13 1 9905-00-248-1143 29 2
3110-00-052-8408 24 9
5305-00-253-5618 29 1
5315-00-058-6079 12 19 5365-00-256-2861 17 4
28 4 5305-00-269-3248 29 10
5315-00-058-6094 10 4 5310-00-274-8710 20 17
5315-00-058-6127 29 3 5310-00-274-8715 20 2
5315-00-060-5074 28 6 24 3
5365-00-067-6910 24 10 32 2
5305-00-067-9867 31 18 1015-00-300-5386 12 12
5305-00-068-0505 24 6 1015-00-300-5391 13 14
5305-00-068-0506 24 2 1015-00-300-5392 23 1
5305-00-071-2513 32 3 1290-00-300-8034 1 9
4933-00-082-0105 31 8 1015-00-305-0754 12 18
4933-00-082-0118 31 1 4933-00-334-0498 33 6
4933-00-082-0128 31 3 4933-00-334-0499 33 9
4933-00-082-0134 31 9 5305-00-336-1616 13 16
5360-00-088-4815 31 7 1015-00-340-3426 13 15
5365-00-088-4845 31 11 1240-00-344-4689 1 7
1015-00-089-8542 14 17 1005-00-315-3826 7 2
5120-00-099-8544 33 2 1005-00-345-3827 2 2
3110-00-100-5348 23 17 1005-00-345-3828 2 16
5315-00-127-2201 31 15 1015-00-351-2925 21 2
1015-00-133-9436 1 1 1015-00-357-0016 20 18
3110-00-142-0145 24 16 5305-00-389-8133 10 1
5306-00-143-1678 32 7 4933-00-398-4106 33 8
5320-00-143-6343 4 1 5310-00-407-9566 20 10
5360-00-150-2565 21 4 23 8
5330-00-154-3110 21 9 25 2
4010-00-171-4512 31 12 5365-00-419-3094 21 3
5330-00-171-9075 21 12 5365-00-445-5188 21 5
24 8 1015-00-445-9902 17 10
1015-00-219-8147 24 13 5315-00-474-7405 17 5

I-1
SECTION IV TM9-1015-221-34P

NATIONAL STOCK NUMBER AND PART NUMBER INDEX

STOCK NUMBER FIG. ITEM STOCK NUMBER FIG. ITEM

9905-30-480-5661 19 5 1005-00-726-6349 8 4
27 5 1005-00-726-6353 4 2
1015-00-505-5248 1 4 1005-00-726-6355 10 3
5315-00-505-5249 29 8 1005-00-726-6357 3 4
5315-00-505-5250 29 6 1005-00-726-6361 6 7
1005-00-506-5543 2 5 1005-00-726-6366 6 13
1005-00-511-9042 1 2 1005-00-726-6367 10 2
1005-00-511-9043 6 16 1005-00-726-6374 3 2
1015-00-511-9124 1 5 5315-00-726-6377 6 6
1290-00-535-7761 1 6 5315-00-726-6379 8 1
5310-00-543-1863 20 12 5315-00-726-6380 6 9
3110-00-554-5304 2i 14 5315-00-726-6386 7 1
5310-00-570-9739 S1 6 5315-00-726-6388 8 2
5305-00-576-2150 17 2 1005-00-726-6393 3 5
5310-00-595-7237 25 17 1005-00-726-6399 7 4
29 11 1005-00-726-6400 3 1
5330-00-599-2934 23 10 1005-00-726-6408 6 10
1005-00-603-1297 2 8 1005-00-726-6409 2 6
1015-00-615-7208 32 10 5360-00-796-6413 6 5
5315-00-616-5514 12 3 5360-00-726-6415 2 9
17 3 5360-00-726-6416 3 6
20 11 5360-00-726-6417 6 8
5315-00-616-5522 21 11 5360-00-726-6419 8 5
23 6 5360-00-726-6420 6 12
5315-00-616-5525 24 12 5360-00-726-6421 5 3
5310-00-637-9541 26 3 5360-00-726-6422 7 3
5305-00-638-7518 13 5 1005-00-726-6423 11 1
6675-00-641-3540 33 4 1005-00-726-6430 8 3
1015-00-672-8735 12 7 1005-00-726-6416 8 8
1015-00-679-0481 12 4 5320-00-726-6447 8 6
5310-00-682-5444 20 13 1005-00-726-6448 8 7
1005-00-690-4002 9 1 5315-00-726-6497 6 2
5305-00-715-1216 31 14 5315-00-726-6498 6 3
5305-00-716-8001 25 7 1005-00-726-6501 5 4
26 1 1005-00-726-6561 6 15
1015-00-723-0796 12 6 5310-00-726-6830 2 13
1015-00-723-0797 12 5 5310-00-726-6831 2 12
1015-00-723-0799 12 14 1005-00-726-6833 2 14
1015-00-723-8001 15 1 5315-00-726-S849 11 2
5365-00-723-0806 12 10 1015-00-730-7472 13 7
3110-00-723-0807 12 11 5360-00-730-7475 17 8
5360-00-723-0809 12 16 5315-00-730-7473 17 6
15 3 1015-00-730-7477 17 1
5360-00-723-0810 12 9 5305-00-730-7478 14 15
5305-00-724-5817 25 15 1015-00-730-7490 14 13
5305-00-724-6799 21 6 5310-00-730-7493 14 2
23 3 5365-00-730-7494 14 1
1005-00-726-6340 3 7 3120-00-730-7495 14 9
1005-00-726-6342 2 4 1015-00-730-7496 14 8
1005-00-726-6348 6 4 1015-00-730-7497 14 7

I-2
SECTION IV TM9-1015-221-34P

NATIONAL STOCK NUMBER AND PART NUMBER INDEX

STOCK NUMBER FIG. ITEM STOCK NUMBER FIG. ITEM

5310-00-730-7498 14 6 5365-00-840-3062 25 22
1015-00-730-7502 13 13 1015-00-840-3063 25 23
1015-00-730-7503 13 8 5307-00-840-3064 25 21
1015-00-730-7509 17 7 1015-00-840-3069 26 13
1015-00-730-7512 14 11 1015-00-840-3070 26 10
1015-00-730-7513 14 14 5315-00-840-3071 26 7
1005-00-730-7514 14 5 5315-00-340-3072 26 8
1015-00-730-7517 13 6 5315-00-840-3073 26 6
1015-00-730-7519 13 3 5365-00-840-3086 25 5
1015-00-730-7523 17 11 5365-00-840-3087 25 4
4933-00-730-7536 33 5 1015-00-840-3090 25 24
4933-00-730-7537 33 7 1015-00-840-3093 26 14
1005-00-751-9108 2 11 1015-00-840-3096 26 11
5310-00-761-3706 31 2 1015-00-840-3185 20 6
5310-00-761-6882 32 1 1015-00-840-3186 20 5
5310-00-762-6219 31 16 5306-00-840-3187 22 4
1015-00-782-9872 32 6 5360-00-840-3188 20 7
1015-00-782-9873 32 9 5315-00-840-3189 20 8
5310-00-785-1762 26 2 5310-00-840-3192 22 3
1005-00-795-5402 2 15 1015-00-840-3194 20 3
1015-00-797-3568 22 2 1015-00-840-3195 22 5
5365-00-804-9735 30 9 1015-00-840-3242 25 12
5365-00-807-2636 21 8 1015-00-840-3243 25 11
5310-00-809-4058 32 4 5315-00-312-3308 16 1
5310-00-809-5998 32 8 5315-00-844-3662 14 4
5310-00-809-8541 31 5 5315-00-844-3961 23 2
5315-00-814-3531 22 1 5315-00-844-3964 30 6
4933-00-822-1718 33 3 5315-00-844-3965 14 12
5305-00-823-5719 23 18 5315-00-844-3966 13 9
5310-00-827-8487 25 16 30 3
5315-00-828-9829 26 4 5360-00-854-4471 2 3
5315-00-840-0227 21 1 5305-00-855-0972 19 4
1015-00-840-3000 23 16 27 4
1015-00-840-3005 23 20 5360-00-873-6959 13 10
3110-00-840-3009 23 22 1015-00-878-0032 14 16
5330-00-840-3010 23 21 1240-00-886-5888 1 8
3120-00-840-3023 23 24 4933-00-891-7892 33 1
5310-00-840-3025 20 14 5315-00-898-9323 3 3
1015-00-840-3026 23 15 1005-00-909-2854 30 10
1025-00-840-3027 23 12 5310-00-913-7020 25 14
5360-00-840-3028 23 13 1015-00-921-0587 28 7
5365-00-840-3029 23 14 1005-00-923-4255 30 8
5330-00-840-3031 23 25 5310-00-934-9751 25 6
1015-00-840-3044 26 12 1015-00-945-9769 16 2
1015-00-840-3045 26 9 3110-00-948-9796 17 9
1015-00-840-3048 26 5 5305-00-978-9378 14 10
1015-00-840-3054 25 3 5305-00-983-6662 13 12
1015-00-840-3056 25 10 20 1
1015-00-840-3060 25 8 5305-00-983-6664 13 4
1015-00-840-3061 25 13 5305-00-983-6670 25 1

I-3
SECTION IV TM9-1015-221-34P

NATIONAL STOCK NUMBER AND PART NUMBER INDEX

5305-00-983-6672 28 1
5305-00-983-6673 25 9
5305-00-983-7448 13 2
5305-00-984-4988 31 10
5305-00-984-7363 23 11
5305-00-989-7434 20 16
5310-00-998-0608 25 20
1015-00-998-6072 13 11
1015-00-998-6073 12 13
1015-00-998-6074 12 8
1015-00-998-6075 12 17
1015-01-044-6921 2 1
5310-01-064-7229 20 4
5340-01-071-3937 25 18
5310-01-080-2211 25 16
3120-01-113-9909 21 17

I-4
SECTION IV TM9-1015-221-34P

NATIONAL STOCK NUMBER AND PART NUMBER INDEX

FSCM PART NUMBER STOCK NUMBER FIG. ITEM

88044 AN565D820H6 5305-00-576-2150 17 2

88044 AN565E624H16 5305-00-823-5719 23 18
79410 B107A 3110-00-554-5304 21 14
81349 MIL-T-11752 6675-00-641-3540 33 4
96906 MS15001-1 4730-00-050-4203 24 1
96906 MS15003-1 4730-00-050-4208 23 23
96906 MS16562-100 5315-00-842-3308 16 1
96906 MS16562-109 5315-00-051-8637 5 1
96906 MS16562-120 5315-00-051-8636 6 14
96906 MS16562-127 5315-00-058-6079 12 19
28 4
96906 MS16562-131 5315-00-898-9823 3 3
96906 MS16562-132 5315-00-828-9829 26 4
96908 MS16562-134 5315-00-058-6094 10 4
96906 MS16562-141 5315-00-052-6697 18 1
96906 MS16562-24 5315-00-840-0227 21 1
96906 MS16562-42 5315-00-240-1008 32 5
96906 MS16562-43 5315-00-844-3961 23 2
96906 MS16562-47 5315-00-844-3964 30 6
96906 MS16562-48 5315-00-844-3965 14 12
96906 MS16562-49 5315-00-844-3966 13 9
30 3
96906 MS16562-50 5315-00-814-3531 22 1
96906 MS16562-62 5315-00-844-3662 14 4
96906 MS16625-1037 5365-00-804-9735 30 9
96906 MS16625-1100 5365-00-807-2636 21 8
96906 MS16626-1050 5365-00-256-2861 17 4
96906 MS16628-1112 5365-00-067-6910 24 10
96906 MS16997-58 5305-00-978-9378 14 10
96906 MS16998-45 5305-00-983-6662 13 12
20 1
96906 MS16998-47 5305-00-983-6664 13 4
96906 MS16998-50 5305-00-052-8251 12 1
13 1
96906 MS16998-58 5305-00-983-6670 25 1
96906 MS16998-59 5305-00-383-6671 23 19
96906 MS16998-60 5305-00-983-6672 28 1
96906 MS16998-61 5305-00-983-6673 25 9
96906 MS16998-74 5305-00-983-7448 13 2
96906 MS18154-214 5305-00-067-9867 31 13
96906 MS19059-1012 3110-00-142-0145 24 16
96906 MS19059-1638 3110-00-052-8408 24 9
96906 MS19061-13 3110-00-948-9796 17 9
96906 MS19068-082 5310-00-543-4863 20 12
96906 MS19070-082 5310-00-682-5444 20 13
96906 MS21318-27 5305-00-253-5618 29 1
96906 MS24585-1314 5360-00-150-2565 21 4
96906 MS24629-23 5305-00-855-0972 19 4
27 4
96906 MS24665-359 5315-00-013-7214 25 19
96906 MS24665-814 5315-00-013-7137 6 1

I-5
SECTION IV TM 9-1015-221-34P

NATIONAL STOCK NUMBER AND PART NUMBER INDEX

FSCM PART NUMBER STOCK NUMBER FIG. ITEM

96906 MS27183-10 5310-00-809-4058 32 4

96906 MS27183-18 5310-00-809-5998 32 8
90906 MS27183-27 5310-00-809-8541 31 5
96906 MS28775-112 5330-00-599-2934 23 10
96906 MS35191-272 5305-00-981-7363 23 11
96906 MS35206-228 5305-00-984-4988 31 10
96906 MS35207-233 5305-00-989-7434 20 16
96906 MS35333-42 5310-00-595-7237 25 17
29 11
96906 MS35338-45 5310-03-407-9566 20 10
23 8
25 2
96906 MS35338-46 5310-00-637-9541 26 3
96906 MS35338-62 5310-00-274-8710 20 17
96906 MS35338-63 5310-00-274-8715 20 2
24 3
32 2
96906 MS35338-72 5310-00-013-1074 31 17
96906 MS35426-31 5310-01-080-2211 25 16
96906 MS35650-302 5313-00-934-9751 25 6
96906 MS35671-55 5315-00-060-5074 28 6
96106 MS35691-1022 30 2
96906 MS35692-61 5310-00-998-0608 25 20
96906 MS35756-12 5315 00-616-5522 21 11
23 6
96906 MS35756-6 5315-00-616-5514 12 3
17 3
20 11
96906 MS35756-9 5315-00-616-5525 24 12
96906 MS51922-53 30 1
96906 MS51964-51 5305-00-724-6799 21 6
23 3
96906 MS51964-70 5305-00-724-5817 25 15
96906 MS51967-15 5310-00-761-3706 31 2
96906 MS51967-2 5310-00-761-6882 32 1
96906 MS51967-33 5310-00-762-6219 31 16
96906 MS51968-3 5310-00-913-7020 25 14
96906 MS51968-9 5310-00-785-1762 26 2
96906 MS51974-38 5305-00-716-8001 25 7
26 1
96906 MS51981-40 5305-00-715-1216 31 14
96906 MS90726-33 5306-00-225-9088 20 9
23 7
96906 MS90726-5 5305-00-068-0505 24 6
96906 MS90726-6 5305-00-068-0506 24 2
96906 MS90727-72 5305-00-269-3248 29 10
96906 MS90728-16 5305-00-071-2513 32 3
81348 RR-C-271 4010-00-171-4512 31 12
19206 11577210 1015-00-921-0587 28 7
19206 11577242 1005-00-909-2854 30 10
19206 11577243 30 11

I-6
SECTION IV TM 9-1015-221-34P

NATIONAL STOCK NUMBER AND PART NUMBER INDEX

FSCM PART NUMBER STOCK NUMBER FIG. ITEM

19206 11577244 1005-00-923-4255 30 8

19206 11577693 4933-00-891-7892 33 1
19206 11577713 9905-00-248-1143 29 2
19206 11577981 1015-00-089-8542 14 17
19206 11578002 1015-00-878-0032 14 16
19206 11578014 1015-00-133-9436 1 1
19206 11578015 1015-00-998-6072 13 11
19206 11578016 5360-00-873-6959 13 10
19206 11578017 1015-00-998-6073 12 13
19206 11578018 1015-00-998-6074 12 8
19206 11578019 1015-00-998-6075 12 17
19206 11578249 5365-00-445-5188 21 5
19206 11578250 5365-00-419-3094 21 3
19206 11578253 1015-00-351-2925 21 2
19206 11578254 1015-00-357-0016 20 18
19206 11578301 1015-00-004-2318 12 15
15 2
19206 11578302 5310-01-064-7229 20 4
19206 11578397 9905-00-480-5661 19 5
27 5
19206 11576875 3120-01-113-9909 21 17
19206 11579321 5310-00-021-7216 31 4
19206 11579601 5310-01-071-3937 25 18
19206 11579630 3110-00-100-5348 23 17
19206 11579631 5330-00-171-9075 21 12
24 8
19206 11579632 5330-00-154-3110 21 9
19204 12003046 1015-01-044-6921 2 1
50024 2479141 5120-00-099-8544 33 2
21450 586127 5315-00-058-6127 29 3
19204 5910378 33
19207 6157208 1015-00-615-7208 32 10
19204 7230794 15 4
19206 7230796 1015-00-723-0796 12 6
19206 7230797 1015-00-723-0797 12 5
19206 7230799 1015-00-723-0799 12 14
19206 7230800 1015-00-723-0800 15 1
19206 7230806 5365-00-723-0806 12 10
19206 7230807 3110-00-723-0807 12 11
19206 7230809 5360-00-723-0809 12 16
15 3
19206 7230810 5360-00-723-0810 12 9
19204 7266340 1005-00-726-6340 3 7
19204 7266341 2 7
19204 7266342 1005-00-726--6342 2 4
19204 7266344 4 3
19204 7266348 1005-00-726-6348 6 4
19204 7266349 1005-00-726-6349 8 4
19204 7266353 1005-00-726-6353 4 2
19204 7266355 1005-00-726-6355 10 3
19204 7266357 1005-00-726-6357 3 4

I-7
SECTION IV TM 9-1015-221-34P

NATIONAL. STOCK NUMBER AND PART NUMBER INDEX

PART NUMBER INDEX

FSCM PART NUMBER STOCK NUMBER FIG. ITEM

19204 7266361 1005-00-726-6361 6 7

19204 7266366 1005-00-726-6366 6 13
19204 7266367 1005-00-726-6367 10 2
19204 7266374 1005-00-726-6374 3 2
19204 7266377 5315-00-726-6377 6 6
19204 725S379 5315-00-726-6379 8 1
19204 7266380 5315-00-726-6380 6 9
19204 7266386 5315-00-726-6386 7 1
19204 7266388 5315-00-726-6388 8 2
19204 7266389 5 2
19204 7266393 1005-00-726-6393 3 5
19204 7266399 1005-00-726-6399 7 4
19204 7266400 1005-00-725-6400 3 1
19204 7266408 1005-00-726-6408 6 10
19204 7266409 1005-00-726-6409 2 6
19204 7266413 5360-00-726-6413 6 5
19204 7266415 5360-00-726-6415 2 9
19204 7266416 5360-00-726-6416 3 6
19205 7266417 5360-00-726-6417 6 8
19205 7266419 5360-00-726-6419 8 5
19204 7266420 5360-00-726-6420 5 12
19204 7266421 5360-00-726-6421 5 3
19204 7266422 5360-00-726-6422 7 3
19204 7266423 1005-00-726-6423 11 1
19204 7265830 1005-00-726-6430 8 3
19204 7265446 1005-00-726-6416 8 8
19204 7266447 5320-00-726-6447 8 6
19204 7266448 1005-00-726-6448 8 7
19204 7266497 5315-00-726-6497 6 2
19204 7266498 5315-00-726-6498 6 3
19204 7266500 6 11
19204 7266501 1005-00-726-6501 5 4
19204 7266561 1005-00-726-6561 6 15
19204 7266830 5310-00-726-6830 2 13
19205 7266831 5310-00-726-6831 2 12
19204 7266833 1005-00-726-6833 2 14
19204 7266349 5315-00-726-6849 11 2
19204 7266871 5305-00-339-8133 10 1
19204 7267383 1005-00-506-5543 2 5
19204 7267838 1005-00-345-3826 7 2
19204 7267851 1005-00-345-3827 2 2
19204 7267852 5 5
19204 7267859 1005-00-345-3828 2 16
19204 7268115 1005-00-511-9042 1 2
19204 7263117 8 9
19204 7268118 1005-00-511-9043 6 16
19204 7268119 2 10
19204 7268253 10 5
19204 7268254 9 2
19204 7268255 2 17
19204 7268393 1005-00-603-1297 2 8

I-8
SECTION IV TM 9-1015-221-34P

NATIONAL STOCK NUMBER AND PART NUMBER INDEX

PART NUMBER INDEX

FSCM PART NUMBER STOCK NUMBER FIG. ITEM

19206 7305399 5311-00-127-2201 31 15

19206 7305400 5315 00-226-2670 31 13
19206 7305402 5360-00-088-4815 31 7
19206 7305405 5365-00-088-4845 31 11
19206 7305409 5310-00-570-9739 31 6
19206 7305413 4933-00-082-0105 31 8
19206 7306689 4933-00-082-0118 31 1
19206 7307472 1015-00-730-7472 13 7
19206 7307475 5360-00-730-7475 17 8
19206 7307476 5315-00-730-7476 17 6
19206 7307477 1015-00-730-7477 17 1
19206 7307478 5305-00-730-7478 14 15
19206 7307484 1015-00-445-9902 17 10
19206 7307185 18 2
19206 7307490 1015-00-730-7490 14 13
19206 7397493 5310-00-730-7493 14 2
19206 7307494 5365-00-730-7434 14 1
19206 7307495 3120-00-730-7495 14 9
19206 7337496 1015-00-730-7496 14 8
19206 7307497 1015-00-730-7497 14 7
19206 7307498 5310-00-730-7498 14 6
19206 7307502 1015-00-730-7532 13 13
19206 7307503 1015-00-730-7503 13 8
19206 7307509 1015-00-730-7503 17 7
19206 7307512 1015-00-730-7512 14 11
19206 7307513 1015-00-730-7513 14 14
19206 7307514 1005-00-730-7514 14 5
19206 7307517 1015-00-730-7517 13 6
19206 7307519 1015-00-730-7519 13 3
19206 7307520 12 2
19206 7307523 1015-00-730-7523 17 11
19206 7307536 4933-00-730-7536 33 5
19206 7307537 4033-00-730-7537 33 7
19201 7307553 30 5
19204 7307559 30 13
19204 7307567 30 7
19206 7308853 1015-00-300-5386 12 12
19206 7308854 12 20
19206 7308855 1015-00-305-0734 12 18
19206 7308861 1015-00-300-5391 13 14
19206 7309107 5305-00-336-1616 13 16
19206 7309111 4933-00-334-0498 33 6
19206 7309114 4933-00-082-0128 31 3
19206 7309115 4533-00-082-0134 31 9
19206 7309119 4933-00-334-0499 33 9
19206 7309187 1015-00-340-3426 13 15
19206 7309208 1005-00-047-3861 14 3
19204 7309725 30 12
19204 7309726 30 4
19206 7309749 13 17
19205 7319944 4933-00-398-4106 33 8

I-9
SECTION IV TM 9-1015-221-34P

NATIONAL STOCK NUMBER AND PART NUMBER INDEX

PART NUMBER INDEX

FSCM PART NUMBER STOCK NUMBER FIG. ITEM

19204 7790489 1005-00-690-4002 9 1

19204 7790869 5320-00-143-6343 4 1
19204 7790870 1005-00-795-5402 2 15
19204 7790871 1005-00-751-9108 2 11
19204 7791229 5360-00-854-4471 2 3
19205 7799716 4933-00-822-1718 33 3
19200 8286960 1240-00-886-5888 1 8
19200 8293769 1290-00-300-8034 1 9
19200 8299670 1240-00-344-4689 1 7
19200 8239677 1290-00-535-7761 1 6
19206 8403000 1015-00-840-3000 23 16
19206 8403005 1015-00-840-3005 23 20
19206 8403009 3110-00-840-3009 23 22
19200 8403010 5333-00-840-3010 23 21
19206 8403023 3120-00-840-3023 23 24
19200 8403025 5310-00-840-3025 20 14
19206 8403026 1015-00-840-3026 23 15
19206 8403027 1025-00-840-3027 23 12
19206 8403028 5360-00-840-3028 23 13
19206 8403029 5365-00-840-3029 23 14
19200 8403031 5330-00-840-3031 23 25
19206 8403044 1015-00-840-3044 26 12
19206 8403045 1015-00-840-3045 26 9
19206 8403048 1015-00-840-3048 26 5
19206 8403054 1015-00-840-3054 25 3
19206 8403056 1015-00-840-3050 25 10
19206 8403060 1015-00-840-3060 25 8
19206 8403061 1015-00-840-3061 25 13
19206 8403062 5365-00-840-3052 25 22
19206 8403063 1015-00-840-7063 25 23
19206 8403064 5307-00-840-3064 25 21
19206 8403069 1015-00-840-3069 26 13
19206 8403070 1015-00-840-3070 26 10
19200 8403071 5315-00-840-3071 26 7
19200 8403072 5315-00-840-3072 26 8
19200 8403073 5315-00-840-3073 26 6
19206 8403086 5365-00-840-3086 25 5
19206 8403087 5365-00-840-3087 25 4
19206 8403090 1015-00-840-3090 25 24
19206 8403093 1015-00-840-3093 26 14
19206 8403096 1015-00-840-3096 26 11
19200 8403136 23 26
19206 8403161 19 3
19206 8403185 1015-00-840-3185 20 6
19206 8403136 1015-00-840-3186 20 5
19206 8403187 5306-00-840-3187 22 4
19205 8403188 5360-00-840-3188 20 7
19200 8403189 5315-00-840-3189 20 8
19200 8403192 5310-00-840-3192 22 3
19204 8403193 20 15
19206 8403194 1015-00-840-3194 20 3

I-10
SECTION IV TM 9-1015-221-34P

NATIONAL STOCK NUMBER AND PART NUMBER INDEX

19206 8403195 1015-00-840-3195 22 5

19204 8403200 1 3
19206 8403242 1015-00-840-3242 25 12
19206 8403243 1015-00-840-3243 25 11
19204 8403250 19 2
27 2
19206 8403251 1015-00-219-8147 24 13
19206 8403252 1015-00-219-8148 24 4
19206 8403253 3110-00-219-8149 24 7
19206 8403254 3110-00-219-8150 24 11
19206 8403255 1015-00-219-8151 24 17
19206 8403257 3110-00-219-8153 24 14
19206 8403258 1015-00-219-8154 24 15
19206 8403259 23 9
19204 8403260 19 1
27 1
19206 8403261 1013-00-219-8156 21 15
19206 8403262 1015-00-219-8157 21 13
19206 8403270 1015-00-219-8178 21 16
19206 8403274 5310-00-219-8159 21 7
19206 8403277 1015-00-219-8161 21 10
19206 8403329 1015-00-219-8165 23 5
19206 8403333 5365-00-219-8166 24 5
19206 8403353 5310-00-219-8177 23 4
19204 8407810 1015-00-505-5248 1 4
19204 8407811 5315-00-049-5240 29 5
19204 8407812 5360-00-049-5241 29 4
19204 8497813 5315-00-505-5249 29 8
19200 8407814 29 7
19200 8407815 5315-00-505-5250 29 6
19204 8407816 1015-00-049-5242 28 5
19204 8407817 28 3
19204 3407828 29 9
19200 8407829 29 14
19204 8407830 1013-00-511-9124 1 5
19204 8407831 1015-00-049-5244 28 2
19200 8407832 29 12
19200 8407833 29 15
19200 8407834 29 13
19204 8407835 28 8
19206 8407836 1015-00-049-5246 27 3
19206 8413117 1015-00-300-5392 23 1
19206 8766015 16 3
19206 8766016 1015-00-945-9769 16 2
19206 8766017 1015-00-679-0481 12 4
19206 8766029 1015-00-782-9872 32 6
19206 8766031 5306-00-143-1678 32 7
19206 8766038 1015-00-782-9873 32 9
19206 8766068 1015-00-672-8735 12 7
19206 8766848 1015-00-797-3568 22 2
19206 8767165 5315-00-474-7405 17 5

I-11
SECTION IV TM 9-1015-221-34P

NATIONAL STOCK NUMBER AND PART NUMBER INDEX

PART NUMBER INDEX

FSCM PART NUMBER STOCK NUMBER FIG. ITEM

19203 9406768 5305-00-638-7518 13 5

I-12
By Order of the Secretary of the Army:

JOHN A. WICKHAM, JR.

General, United States Army
Chief of Staff

Official:

R. L. DILWORTH
Brigadier General, United States Army
The Adjutant General

DISTRIBUTION:

To be distributed in accordance with DA Form 12-40, Direct Support and General Support Maintenance requirements
for Rifle, Recoilless, 106-MM, M40A2, M40A4.

PU.S. GOVERNMENT PRINTING OFFICE: 1992 - 311-831/60161

PIN: 059909-000
This fine document...

Was brought to you by me:

Liberated Manuals -- free army and government manuals

Why do I do it? I am tired of sleazy CD-ROM sellers, who take publicly

available information, slap “watermarks” and other junk on it, and sell it.
Those masters of search engine manipulation make sure that their sites that
sell free information, come up first in search engines. They did not create it...
They did not even scan it... Why should they get your money? Why are not
letting you give those free manuals to your friends?

I am setting this document FREE. This document was made by the US

Government and is NOT protected by Copyright. Feel free to share,
republish, sell and so on.

I am not asking you for donations, fees or handouts. If you can, please
provide a link to liberatedmanuals.com, so that free manuals come up first in
search engines:

<A HREF=http://www.liberatedmanuals.com/>Free Military and Government Manuals</A>

– Sincerely
Igor Chudov
http://igor.chudov.com/
– Chicago Machinery Movers