uDGA 9.
2 for uXLoader
UGI_uDGA_9.2_uXLoader_ Configuration Guide
by Utopia
Release uDGA 9.2
uDGA 9.2 for uXLoader
Document History
The following table provides an overview of the most important document changes and approvals.
Version Date Description Name
1.0 29-08-2018 Initial version Vasanthi Ajeesh
2.0 14-01-2019 Updated version Vasanthi Ajeesh
3.0 17-01-2021 Revised for uDGA 9.2 PQ Vasanthi Ajeesh
Approval History
Version Date Description Name
1.0 15-09-2018 Approved version Lyle E Snyder
2.0 15-01-2019 Approved version Lyle E Snyder
3.0 17-01-2021 Approved version Deepak Kumar
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 2 of 31
uDGA 9.2 for uXLoader
Table of Contents
Introduction.............................................................................................................................................. 5
Security ................................................................................................................................................... 5
Installing Solution Setup for uXLoader .................................................................................................... 5
Logging and Exploring into uXLoader ..................................................................................................... 6
uXLoader User Interface (UI) Elements .............................................................................................. 6
Explore the uXLoader GUI elements ................................................................................................... 6
Logging into uXLoader ........................................................................................................................ 8
Appendix I: ............................................................................................................................................10
Class Details for EAM Objects ..............................................................................................................10
Class Details for AIW Objects ........................................................................................................... 12
Class Details for MM Objects ............................................................................................................ 12
Appendix II: OData Service ...................................................................................................................13
List of OData Services ....................................................................................................................... 13
uXLoader EAM Synchronous and Asynchronous merged OData Services ..................................... 13
uXLoader EAM Search OData Services ........................................................................................... 13
uXLoader AIW Synchronous and Asynchronous merged OData Services ...................................... 14
uXLoader AIW Search Services ........................................................................................................ 14
uXLoader MM Synchronous and Asynchronous merged OData Services ....................................... 14
uXLoader MM Search Services ......................................................................................................... 14
uXLoader EAM Additional Services ............................................................................................... 14
uXLoader AIW Additional Services ................................................................................................ 15
uXLoader MM Additional Services ................................................................................................. 15
OData Configuration .......................................................................................................................... 15
Activate SAP Gateway ................................................................................................................... 15
Assign System Alias and Activate OData Service ......................................................................... 16
Appendix III: Reports Scheduled in Background ..................................................................................19
Appendix IV: BC-Sets ...........................................................................................................................20
Appendix V: Displaying Product information .........................................................................................21
Appendix VI: Uninstalling uXLoader .....................................................................................................22
Appendix VII: Troubleshooting ..............................................................................................................22
Installation Errors ............................................................................................................................... 22
Prerequisites for uXLoader ............................................................................................................ 24
Error Messages ................................................................................................................................. 24
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 3 of 31
uDGA 9.2 for uXLoader
Error in Data ...................................................................................................................................... 25
Appendix VIII: SSO with SAML Certificate ............................................................................................26
Configure Certificate File Path .......................................................................................................... 30
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 4 of 31
uDGA 9.2 for uXLoader
Introduction
uXLoader is a tool which allows you to upload large amounts of data seamlessly and process the
uploaded data using Microsoft Excel. In other words, uXLoader helps you to upload master data in
SAP MDG directly through Excel for FLOC/EQUI/MBOM/WC/MPMI/MSPT/GNTL/EQTL/FLTL, Asset
Information Workbench (AIW) and Material (MM).
The unique features of this tool are listed as in the following:
• Uploads Master Data into SAP MDG
• Uploads large volume of data with Excel based predefined templates
• Creates and updates master data simultaneously
Security
uXloader uses the Standard SAP MDG security framework. Users will need the SAP standard
roles for given MDG objects. No additional roles are needed.
Installing Solution Setup for uXLoader
This section describes the process of installing the uXLoader. You can also use the same steps, if
you already have a version installed and want to upgrade to the latest release.
Use the following steps to set up Utopia add-on in Excel and the install the uXLoader.
1. Navigate to the folder on your system where the Utopia Solution Setup file is saved and
extracted.
2. Click to run the installer.
The system displays the Microsoft Office Customization Installer screen as in the following
screen.
3. Click “Install” button.
A message is displayed as “The Microsoft Office customization was successfully installed”.
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 5 of 31
uDGA 9.2 for uXLoader
Note
The successful installation displays the Utopia add-on menu option in the Excel sheet.
If you have any specific uXLoader version installed on your machine, you must uninstall the existing
version before installing the latest version. Otherwise, the system displays a message another
uXLoader version is already installed. See Appendix VI: Uninstalling uXLoader
Logging and Exploring into uXLoader
This section describes the process of logging into uXLoader and describes its UI elements.
Note
User should have SAP Login enabled on the system before running application.
uXLoader User Interface (UI) Elements
This section illustrates the significant uXLoader user interface elements.
Explore the uXLoader GUI elements
This table lists the significant GUI elements that you might be looking for in the uXLoader:
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 6 of 31
uDGA 9.2 for uXLoader
Function Menu Option
Activate the following options: uXLoader Tab
Login button,
Welcome <User>
Help drop-down
Displays the popup to enter the system details and the login Login
credentials
Displays the default message before login Welcome Guest!
Displays the following drop-down list. Help
• Utopia Add-in Help Center
• Technical Information
- Enterprise Asset Management
- Fashion Management Solution
- Material Management
- Retail and Fashion Management
• Settings
• Language
• Utopia License
• About
• IniCreator
• ClearCache
Utopia Add-in Help Center
(inactive for this release)
Displays the documents about selected technical objects Technical Information
Displays the login information for the selected object Settings
Select the Language before login if required otherwise defaulted as Language
English
Displays the version and copyright information About
Test-Runs/Validates data Check
Processes data through MDG to create CR(s) Submit
Prepares the data file to create CR(s) Data Sheet
Displays success or failure messages Return Sheet
Displays errors Trace Log
To check Asynchronous Logs, Check Log and Fetch Log
Submit Log
Async Background check process for Error messages Check log
Async Background Submit process Submit log
User can view all the Fields/Tabs with selected technical objects Personalization
and hide/unhide the fields/tabs
User can hide Field/Tabs except Key and Mandatory fields Personalize Template
User can unhide the Fields/Tabs Reset Personalize Template
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 7 of 31
uDGA 9.2 for uXLoader
Logging into uXLoader
Use the following steps to log in the uXLoader.
1. Launch uXLoader.
2. Click on “Login” button.
The system displays the Login popup.
Note
For Asynchronous process the checkbox “Async” must be checked and for Synchronous
process it must be unchecked.
3. Enter the details for the fields as described in the following table:
Field Description
Select SAP Object Drop-down list displays the list of supported objects
Async Checkbox to select the type of Process
SSO Checkbox for SSO (Single Sign-On) functionality
Username Enter SAP username
Password Enter the password
System ID Enter the host name
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 8 of 31
uDGA 9.2 for uXLoader
Port Enter the port name
Client Enter the client
“Login” button Click “Login” button to access work on Excel template.
The system displays the Welcome! <User> message and Submit Data sheet to process.
The system generates template for selected object during login to prepare data from row number 7
onwards.
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 9 of 31
uDGA 9.2 for uXLoader
Appendix I:
Class Details for EAM Objects
This section describes the EAM details for an MDG entity.
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 10 of 31
uDGA 9.2 for uXLoader
S No Entity Class Name
1 EQUI /UGIEAMXL/CL_EQUIPMENT
2 FLOC /UGIEAMXL/CL_FUNCLOC
3 MBOM /UGIEAMXL/CL_MATERIAL_BOM
4 WC /UGIEAMXL/CL_WORK_CENTER
5 MSPT /UGIEAMXL/CL_MEASURING_POINT
6 MPMI /UGIEAMXL/CL_MAINTPLAN_ADAPT
7 GNTL /UGIEAMXL/CL_GENTASKLIST_ADAPT
8 EQTL /UGIEAMXL/CL_EQTASKLIST
9 FLTL /UGIEAMXL/CL_FLTASKLIST
For removing extra F4s in classification tab, below enlisted entries to be deleted from view
“/UGIEAMXL/_V_F4” in SM30 Tcode.
Field Name Field Name Lang. OBJ Name
CLASSIFICATION CHARIDEXTFORM DE Equipment
CLASSIFICATION CHARIDEXTFORM DE Functional Location
CLASSIFICATION CHARIDEXTFORM DE EQTL,GNTL,FLTL
CLASSIFICATION CHARIDEXTFORM EN Equipment
CLASSIFICATION CHARIDEXTFORM EN Functional Location
CLASSIFICATION CHARIDEXTFORM EN EQTL,GNTL,FLTL
CLASSIFICATION CHARIDEXTFORM FR Equipment
CLASSIFICATION CHARIDEXTFORM FR Functional Location
CLASSIFICATION CHARIDEXTFORM FR EQTL,GNTL,FLTL
CLASSIFICATION CHARIDEXTFORM IT Equipment
CLASSIFICATION CHARIDEXTFORM IT Functional Location
CLASSIFICATION CHARIDEXTFORM IT EQTL,GNTL,FLTL
CLASSIFICATION CHARIDEXTFORM ES Equipment
CLASSIFICATION CHARIDEXTFORM ES Functional Location
CLASSIFICATION CHARIDEXTFORM ES EQTL,GNTL,FLTL
CLASSIFICATION CLASSCL DE Equipment
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 11 of 31
uDGA 9.2 for uXLoader
CLASSIFICATION CLASSCL DE Functional Location
CLASSIFICATION CLASSCL DE EQTL,GNTL,FLTL
CLASSIFICATION CLASSCL EN Equipment
CLASSIFICATION CLASSCL EN Functional Location
CLASSIFICATION CLASSCL EN EQTL,GNTL,FLTL
CLASSIFICATION CLASSCL FR Equipment
CLASSIFICATION CLASSCL FR Functional Location
CLASSIFICATION CLASSCL FR EQTL,GNTL,FLTL
CLASSIFICATION CLASSCL IT Equipment
CLASSIFICATION CLASSCL IT Functional Location
CLASSIFICATION CLASSCL IT EQTL,GNTL,FLTL
CLASSIFICATION CLASSCL ES Equipment
CLASSIFICATION CLASSCL ES Functional Location
CLASSIFICATION CLASSCL ES EQTL,GNTL,FLTL
CLASSIFICATION CLSTATUS1CL DE EQTL,GNTL,FLTL
CLASSIFICATION CLSTATUS1CL EN EQTL,GNTL,FLTL
CLASSIFICATION CLSTATUS1CL FR EQTL,GNTL,FLTL
CLASSIFICATION CLSTATUS1CL IT EQTL,GNTL,FLTL
CLASSIFICATION CLSTATUS1CL ES EQTL,GNTL,FLTL
CLASSIFICATION DELETECL EN EQTL,GNTL,FLTL
Class Details for AIW Objects
This section describes the AIW details.
S No Entity Class name
1 MOCR /UGIEXCEL/CL_AIW
Class Details for MM Objects
This section describes the Material details for an MDG entity.
S No Entity Class Name
1 MATERIAL /UEXCEL/CL_MATERIAL
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 12 of 31
uDGA 9.2 for uXLoader
Appendix II: OData Service
The following topics are discussed in the section:
• List of OData Services
• OData Configuration
List of OData Services
uXLoader EAM Synchronous and Asynchronous merged
OData Services
S No Object Service
1 Equipment /UGIEAMXL/EQ_SOP_TAB_PROC_SRV
2 Functional Location /UGIEAMXL/FLOC_SOP_PROC_SRV
3 MBOM /UGIEAMXL/MBOM_SOP_TAB_PROC_SRV
4 Work Center /UGIEAMXL/WC_SOP_TAB_PROC_SRV
5 Measuring Point /UGIEAMXL/MSPT_SOP_TAB_PROC_SRV
6 Maintenance Plan /UGIEAMXL/MPMI_SOP_TAB_PROC_SRV
7 General Task List /UGIEAMXL/TLGN_SOP_TAB_PROC_SRV
8 Equipment Task List /UGIEAMXL/EQTL_SOP_TAB_PROC_SRV
9 Functional Location Task List /UGIEAMXL/FLTL_SOP_TAB_PROC_SRV
uXLoader EAM Search OData Services
S No Object Service
1 Equipment /UGIEAMXL/EQUI_DB_SRCH_SRV,
/UGIEAMXL/EQUI_HA_SRCH_SRV
2 Functional Location /UGIEAMXL/FUNCLOC_DB_SRCH_SRV,
/UGIEAMXL/FUNCLOC_HA_SRCH_SRV
3 MBOM /UGIEAMXL/PMBOMHDR_DB_SRCH_SRV,
/UGIEAMXL/PMBOMHDR_HA_SRCH_SRV
4 Work Center /UGIEAMXL/WORKCNTR_DB_SRCH_SRV,
/UGIEAMXL/WORKCNTR_HA_SRCH_SRV
5 Measuring Point /UGIEAMXL/MSPOINT_DB_SRCH_SRV,
/UGIEAMXL/MSPOINT_HA_SRCH_SRV
6 Maintenance Plan /UGIEAMXL/MPLAN_DB_SRCH_SRV,
/UGIEAMXL/MPLAN_HA_SRCH_SRV
7 General Task List /UGIEAMXL/TLGNHDR_DB_SRCH_SRV,
/UGIEAMXL/TLGNHDR_HA_SRCH_SRV
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 13 of 31
uDGA 9.2 for uXLoader
S No Object Service
8 Equipment Task List /UGIEAMXL/TLEQHDR_DB_SRCH_SRV,
/UGIEAMXL/TLEQHDR_HA_SRCH_SRV
9 Functional Location Task List /UGIEAMXL/TLFLHDR_DB_SRCH_SRV,
/UGIEAMXL/TLFLHDR_HA_SRCH_SRV
uXLoader AIW Synchronous and Asynchronous merged OData
Services
S No Object Service
1 MOCR /UGIEXCEL/MMOP_SRV
uXLoader AIW Search Services
S No Object Service
1 MOCR /UGIEXCEL/EQUI_AIW_HA_SRCH_SRV,
/UGIEXCEL/EQUI_DB_SRCH_SRV,
/UGIEXCEL/EQUI_HA_SRCH_SRV,
/UGIEXCEL/FLOC_AIW_HA_SRCH_SRV,
/UGIEXCEL/FUNCLOC_DB_SRCH_SRV,
/UGIEXCEL/FUNCLOC_HA_SRCH_SRV,
/UGIEXCEL/PMBOMHDR_AIW_HASRCH_SRV,
/UGIEXCEL/PMBOMHDR_DB_SRCH_SRV,
/UGIEXCEL/PMBOMHDR_HA_SRCH_SRV
uXLoader MM Synchronous and Asynchronous merged OData
Services
S No Object Service
1 Material /UEXCEL/MATERIAL_PROCESSING_SRV_AS
uXLoader MM Search Services
S No Object Service
1 Material /UEXCEL/MATERIAL_DB_SRCH_SRV,
/UEXCEL/MATERIAL_HA_SRCH_SRV
uXLoader EAM Additional Services
S No Object Service
1 EAM Header text /UGIEAMXL/EAM_HEADER_TXT_SRV
2 EAM Trace Error Log /UGIEAMXL/TRACE_ERROR_LOG_SRV
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 14 of 31
uDGA 9.2 for uXLoader
S No Object Service
3 EAM System details service /UGIEAMXL/UTILITIES_SRV
4 EAM Search Service /UGIEAMXL/SEARCH_SRV
uXLoader AIW Additional Services
S No Object Service
1 AIW - System Details /UGIEXCEL/UTILITIES_SRV
2 AIW - Header Text /UGIEXCEL/EAM_HEADER_TXT_SRV
uXLoader MM Additional Services
S No Object Service
1 MM - System Details /UEXCEL/UTILITIES_SRV
2 MM - Header Text /UEXCEL/MATERIAL_HEADER_TXT_SRV
OData Configuration
Use the following steps involved in OData configuration:
• Activate SAP Gateway
• Assign System Alias and Activate OData Service
Activate SAP Gateway
Use the following steps to configure OData.
1. Run to t-code SPRO
2. Navigate to the following path:
SAP NetWeaver > SAP Gateway > OData Channel > Configuration
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 15 of 31
uDGA 9.2 for uXLoader
3. Click on Activate or Deactivate Gateway, select “Activate” button to activate SAP Gateway. If it
is currently active it is displayed as “Deactivate” as displayed in the following screen.
Assign System Alias and Activate OData Service
Use the following steps to assign system alias and activate OData Service:
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 16 of 31
uDGA 9.2 for uXLoader
1. Run t-code /IWFND/MAINT_SERVICE.
2. Select the respective service and click on “Add System Alias”.
3. Click on “New Entries” button.
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 17 of 31
uDGA 9.2 for uXLoader
4. Enter System Alias as “LOCAL”.
5. Select “Default System” and “Metadata Default” checkbox.
6. Click on Save and assign Transport Request Number.
7. Activate SICF Node.
a. Select the technical service name.
b. Click on ICF Node and select “Activate” button.
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 18 of 31
uDGA 9.2 for uXLoader
Appendix III: Reports Scheduled in Background
The following reports are scheduled in background for Asynchronous Process.
uXLoader EAM Check Reports
Object Report
Equipment /UGIEAMXL/BACK_CHEK_EQUI
Functional Location /UGIEAMXL/BACK_CHEK_FLOC
Material BOM /UGIEAMXL/BACK_CHEK_MBOM
Work Center /UGIEAMXL/BACK_CHEK_WC
Measuring Point /UGIEAMXL/BACK_CHEK_MSPT
Maintenance Plan /UGIEAMXL/BACK_CHEK_MPMI
General Task List /UGIEAMXL/BACK_CHECK_GNTL
Equipment Task List /UGIEAMXL/BACK_CHEK_EQTL
Functional Location Task List /UGIEAMXL/BACK_CHEK_FLTL
uXLoader EAM Submit Reports
Object Report
Equipment /UGIEAMXL/EQ_TABLE_PROCES_SOP
Functional Location /UGIEAMXL/TABLE_PROCESSOR_FLOC
Material BOM /UGIEAMXL/MBOM_TABLE_PROC_SOP
Work Center /UGIEAMXL/WC_TAB_PROCESS_SOP
Measuring Point /UGIEAMXL/MSPT_TABLE_PROC_SOP
Maintenance Plan /UGIEAMXL/MPMI_TAB_PROCES_SOP
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 19 of 31
uDGA 9.2 for uXLoader
Object Report
General Task List /UGIEAMXL/TLGN_TABLE_PROC_SOP
Equipment Task List /UGIEAMXL/EQTL_TABLE_PROCESS
Functional Location Task List /UGIEAMXL/FLTL_TABLE_PROC_SOP
uXLoader AIW Check Report
Object Report
MOCR /UGIEXCEL/BACK_CHECK_MMOP
uXLoader AIW Submit Report
Object Report
MOCR /UGIEXCEL/TABLE_PROCESSOR_MMOP
uXLoader MM Check Report
Object Report
Material /UEXCEL/BACKGROUND_CHECK_MAT
uXLoader MM Submit Report
Object Report
Material /UEXCEL/TABLE_PROCESSOR_MAT
Appendix IV: BC-Sets
uXLoader EAM BC-Sets:
Activate the following BC Sets for EAM.
• /UGIEAMXL/ODC_DPIM is created to capture UGI related table entries of table
/IWFND/V_MGDPIM (Assign Data Provider to Data Model).
• /UGIEAMXL/FIELD_PROPERTIES is created to capture field property related table entries of
table /UGIEAMXL/V_CONF.
• /UGIEAMXL/F4_UTILITIES_300 is created to capture value help table entries of table
/UGIEAMXL/_V_F4.
• /UGIEAMXL/ERROR_HIGHLIGHT is created to capture error highlighting entries for table
/UGIEAMXL/V_MSG. its for Equipment, Functional Location & Work Center.
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 20 of 31
uDGA 9.2 for uXLoader
uXLoader AIW BC-Sets:
Activate the following BC Sets for AIW.
• /UGIEXCEL/BC_CONFIG is created to capture field property related table entries of table
/UGIEXCEL/V_CONF.
• /UGIEXCEL/F4_UTILITIES_300 is created to capture value help table entries of table
/UGIEXCEL/_V_F4.
uXLoader MM BC-Sets:
Activate the following BC Sets for MM.
• /UEXCEL/MESSAGE_MAPPING is created to capture message mappings related table
entries of table /UEXCEL/V_MSG.
• /UEXCEL/FIELD_PROPERTIES is created to capture field property related table entries of
table /UEXCEL/V_CONFIG.
• /UEXCEL/F4_UTILITIES_130 is created to capture value help table entries of table
/UEXCEL/_V_F4.
Appendix V: Displaying Product information
The “About” option in the uXLoader displays the details of the installed version and the copyright
information of the product.
Use the following steps to display the product information.
• Login to uXLoader. Refer Logging into uXLoader for more information.
• Click on Help dropdown and select About.
• Version of the uXLoader and copyright information are displayed as in the following screen.
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 21 of 31
uDGA 9.2 for uXLoader
Appendix VI: Uninstalling uXLoader
Before upgrading to the latest uXLoader version, you must first uninstall the current version from the
system. To uninstall the existing version, use the following step.
Click Start and navigate to Control Panel > Programs > Uninstall uXLoader> Right-click on the
uXLoader select Uninstall.
Appendix VII: Troubleshooting
This troubleshooter section provides a listing of common errors, the reasons why you are getting
these errors and the solution to help you fix these issues that you may experience while using
uXLoader.
• Installation Errors
• Error Messages
• Error in Data
Installation Errors
This section lists the various installation errors:
1. The “Login” button in Utopia tab remains invisible, after installation of uXLoader.
• Reason 1: The “Developer” tab needs to be enabled in Excel Ribbon tab.
• Resolution: In File > Options > Add-ins > Enable the Developer tab at Excel Ribbon at
Customize Ribbon option.
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 22 of 31
uDGA 9.2 for uXLoader
• Once the button is visible, the option can be unchecked.
• Reason 2: Ulabs. [Link] option in Add-in feature might have been disabled at COM
Add-ins option
• Resolution: In File > Options > Add-ins > Manage > Select COM Add-ins. Check the
[Link] and close the Excel. Then again check the same. Login button will be
visible.
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 23 of 31
uDGA 9.2 for uXLoader
2. No response from Excel when you click on the “Login” button.
• Reason: Either SAP GUI has not been installed or the hosts file is missing.
• Resolution: Install SAP GUI and make sure the hosts file is installed at the following location
C:\Windows\System32\drivers\etc. Verify the prerequisites as detailed:
Prerequisites for uXLoader
• Microsoft Office Excel with Add-in feature enabled
• SAP GUI
• SAP Note 2348105 need to be available in the system
• Visual Studio 2010 Runtime(x64)
• Hosts file needed to be available at C:\Windows\System32\drivers\etc to proper login into the
system
• uXLlogon_Objects.ini file need to be available at
C:\Users\<User>\AppData\Roaming\SAP\Common to select object to logon to.
Error Messages
Error messages displayed as in the following screen: “Name or password is incorrect (repeat logon)”
• Reason: User typed invalid credentials. For example, incorrect username.
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 24 of 31
uDGA 9.2 for uXLoader
• Resolution: To resolve this, valid SAP credentials needs to be entered.
Error in Data
Error message displayed as in the following screen: An Error Occurred. The remote server returned
an error: Invalid data input.
• Reason: For example, User entered incorrect UOM.
• Check errors in "Log Trace "
• Resolution: Enter a valid UOM "KG" as specified.
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 25 of 31
uDGA 9.2 for uXLoader
Appendix VIII: SSO with SAML Certificate
Use the following steps to install SAML Certificate.
1. Open Microsoft Management Console (mmc) in command prompt.
2. Select Add/Remove Snap-in.
3. Select “Certificates” and click “Add” button.
4. Select “Computer account” option.
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 26 of 31
uDGA 9.2 for uXLoader
5. Select “Local Computer”.
6. After “Finish” expand the “Certificates” node.
7. Right-Click and click “Import”.
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 27 of 31
uDGA 9.2 for uXLoader
8. Go to Certification Import Wizard.
9. Select the certificate from local path.
10. Select the next option as in the following screen.
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 28 of 31
uDGA 9.2 for uXLoader
11. Complete the Certificate Import Wizard.
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 29 of 31
uDGA 9.2 for uXLoader
Configure Certificate File Path
User can change the path and password in the ini file as mentioned path:
C:\Users\<Username>\AppData\Roaming\SAP\Common\uXLSS0_Certificate.ini.
User can change the path only and the not password from the file, as in the following screen.
i.e., User will keep the certificate in D:\SAML_ULABS_Cert\SAML_ULABS.p12 and modify the path
marked in the following screen.
Note
One space is required between path and password.
Multiple Check and Submit Job Scheduling for Async call
For uXLoader – MM, there is a functionality to split the Check or Submit jobs into multiple
jobs. This helps in faster processing. There is a parameter /UEXCEL/MATERIAL for Material,
set in transaction code [Link] contains the number of records that would go into a
single job.
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 30 of 31
uDGA 9.2 for uXLoader
For example, in the above setup, if the uXLoader file contains 3000 records, then uXLoader
backend program would create 3000 divided by 250 = 12 batch jobs and 1 header job.
All these 13 jobs would get active at the same time. This will create 12 Change requests
(CR). In fetch or submit log, it gives the status of job as in progress if it is still running. It
gives the list of CRs created if the job has successfully run in the Return tab.
Utopia uDGA Solutions Configuration Guide
© 2021 Utopia Global, Inc. Page 31 of 31
