water line

detect all types of groundwater

www.Geo-Ground.com
 Contents

Property rights 1 Se�ngs 28

Introduc�on 2 Wireless handle charging 33

Package Contents 3 Technical specifica�ons 35

Device installa�on 6 Warnings 37

Overview 10

keyboard 11

Turn on the device 12

Main screen 13

Water detect 15

Adjust the ground balance 21

Search method 22
 Property rights

Introducing the Water Line WL-9003 from Geoground..

This device is designed, programmed and produced exclusively in theg eophysical
group “Geoground”. All innova�ons, designs and calcula�on algorithms available
in this device are exclusive to this company and any copying ori mita�on of these
technologies requires a legal license from Geoground.
Geoground is not responsible for any use of its products in viola�on of the laws
of the country in which these devices are used, nor is the company responsible
for any kind of damage resul�ng from the wrong use of the device or
misunderstanding of this usage guide.

Website : www.geo-ground.com
Email(Info) : [email protected] Email(Sales) : [email protected]

1
 Introduc�on

Star�ng from the light of the idea, passing through the en�re planning stages, and
ending with the comple�on of implementa�on and presenta�on.. Our company
“Geoground” seeks con�nuously and accurately to develop and modernize these stages
and their fields in the detec�on of various precious metals and treasures since its
establishment nearly 20 years ago.
We always look forward to the distant horizon and the near future, and we confidently
and steadily take all necessary steps to provide the best modern technologies and
high-quality equipment, in order to help all our customers who are eager to reveal their
treasures hidden in the ground.
With a full team of experts, we always strive to manufacture and provide the best
materials for our devices and design new genera�ons of electronic boards and
controllers, to suit all users, with a lot of features and technologies with each new
launch of Geoground devices.
We work in Geoground factories with high accuracy, all stages of designing and
manufacturing the pieces we offer, through the en�re produc�on stage, ending with the
last audited presenta�on and produc�on, to ensure high performance and accuracy in
the results while searching for your hidden treasure.
2
 Package contents

1 2

Main unit Smart sensor

4
3 5
Signal booster dish

Wireless handle Search antennas

3
1 Main unit: Or the main control unit of the
Water Line device. The main unit from
Geoground comes with a contemporary
and modern design, and is easy to store and
carry. The basic materials of the device are
also designed with high cra�smanship and
endless precision in order to adapt to the
longest �me and various uses in all search
environments.
2 Smart sensor: This unit is sensi�ve to undergroundwater. When we set
up the device and start searching using the WATER DETECT system in
which we use the smart sensor unit, we will see that the sensor light in the
upper part of the unit starts to shine in harmony with the search results
captured by the device. Geoground has developed modern technologies
in the smart sensor unit, enabling the user to use it in most environments
and uses, effec�vely and powerfully.

normal search presence of water

4
3 Wireless handle: However, this handle that holds the
device is completely wireless, the company has developed
several advantages in it, a search that fits all the necessary
uses with the device. It started with the rota�on feature
that allows the device to rotate freely and smoothly around
its axis towards the targets captured by the device, and
passed through other features such as the con�nuous press
bu�on, the start selector, the rota�on lock bu�on, the easy
and quick installa�on and removal bu�on, and ending with
the charging feature via the new Type-C port.
4 Signal Booster Dish: This unit is one of the new and
dis�nc�ve addi�ons to the device. The dish enhances and
filters all signals received by the device, in order to translate
them into data that the device's technologies can understand.
5 Search antennas: or the antennas responsible for receiving or transmi�ng
the basic signals of the device. With the advantage of opening the antennas
un�l they take their full length, the company has worked here to enhance
the strength and reach of these antennas to the largest possible search area.

5
Device installa�on: Device installa�on

1- Install the smart sensor in

the device correctly. Sensor Lock

A�en�on
The sensor lock bu�on
should be on the top side of
the main unit.

If a smart sensor is not installed on the device, in systems that use

the sensor, a sensor error message will be displayed on the systems
screens. Install the smart sensor correctly, you will no�ce that the
error message has disappeared, and you can then con�nue working.

6
2- Install the search antennas on the device as shown on the side. Then
twist the antennas clockwise un�l they lock into the loca�on indicated on
the main unit.

Clockwise Clockwise
rota�on rota�on

7
 3- Install the handle unit on the
device from the bo�om side.

A�en�on must be paid to

inser�ng the four pegs
located on the upper side of
the wireless handle unit
directly into the correct
slots corresponding to them
at the bo�om of the main
unit of the device, correctly.

8
4- Install the signal booster dish in the correct place as shown in the
pictures below.

The signal booster dish is a very dis�nc�ve and powerful addi�on to

the Water Line device, as this dish helps enhance all the signals
captured by the device. This will help the device be�er iden�fy all the
different signals in the search area.

Please take care to

insert the signal booster
dish in the correct place
as shown on the side.

9
 Overview
Screen unit Signal booster dish
Fashlight

new!
Sensor lock
Display screen Antennas

Keyboard

Charging socket new!

Type-C
Sensor light
Handle Lock
Charging light
Smart sensor
Start bu�on
Rota�on lock

Wireless handle unit

Handle charging socket

Type-C

10
Keyboard
laser start bu�on

okay back

le� right

up down

11
 Turn on the device
A�er installing the device, and before star�ng to use it, make sure that
the device and the wireless handle are connected to charging un�l the
color of the charging bu�on changes from red to blue.

Open the home screen unit, press and hold the power bu�on. Wait a li�le
while un�l the download is complete. The main screen will appear first.

Splash screen

We strongly recommend that the device be in a flat and horizontal

posi�on when opera�ng the device for the first �me.

12
 Main screen
main menu

5 4 3 2 1

1 Ba�ery: Shows us the current charge percentage of the device.

2 Flashlight: to turn on or off the Flashligh, we can press the led bu�on.
3 Clock: We can set it from the device se�ngs.
4 Sound: We can control it from the device se�ngs.
5 Language: Here it shows us the language used in the device, as the
device contains eight interna�onal languages, which we can also
change from the device se�ngs.

13
 A�er turning on the device, you will see the screen below. We can go to
the “WATER DETECT” op�on or go to the se�ngs by pressing the
Down/Up key of the device keyboard.

To enter one of the main op�ons

available, we press the ok key on
the keyboard as well.
We choose to start the search from
the main menu and press ok, we
will see the system se�ngs screen
first, as shown below.

14
 WATER DETECT
• First In the “WATER DETECT”sec�on we find:

1- Water type:
From the water type op�on, we can choose the type of water we are
looking for in the target area. The Water Line device can search for three
main types of water; Normal, salty and fresh water.

Fresh water Salty water Normal water

We choose the type of water that we want to search for in the area and
move on to the next op�on to complete the search se�ngs.
In the case of choosing the type of normal water, the user must search in
an area and soil compa�ble with the possibility of normal presence. Ordi-
nary water is o�en present in most soils.
If choosing the saltwater type, we should look in an area with high salinity.
In the case of choosing the type of fresh water, the soil or the area must
also have sources or rivers of fresh or drinkable water.
Use the le� and right keys on the keyboard to change the target water type.
15
 • Second In the “WATER DETECT” sec�on we find:

2- Distance: It expresses the search distance in the target area.

From this op�on we can choose the distance we want the device to search
the target area. The Water Line device can also search for distances up to
a maximum of 3000 meters.

We choose the appropriate distance, and complete the se�ngs...

We also always recommend choosing the appropriate distance for the
area in which we are searching, meaning it is not necessary to always
choose the largest distance value available in the device.
Note: By long pressing the le�/right keys, the values will change faster.

16
• Third In the “WATER DETECT” sec�on we find:

3- Depth: It expresses the distance of the depth to be searched within or

below the target area. The Water Line device is characterized by the abili-
ty to detect water up to a depth of 1200 meters underground, so that it is
able to discover most targets in the search area.

Use the le�/right keys on the keyboard to change the desired depth.
We also always recommend choosing the appropriate distance for the
area in which we are searching, meaning it is not necessary to always
choose the largest distance value available in the device.
Note: By long pressing the le�/right keys, the values will change faster.

17
 • Fourth In the “WATER DETECT” sec�on we find:

4- Search: Or the op�on to start the search, a�er which we will move on
to the search process. From here we can see all the se�ngs that we speci-
fied in the previous op�ons. We make sure that we have chosen the
appropriate se�ngs for our search, and press the OK bu�on on the
keyboard to start scanning.

If we want to change one of the previous se�ngs, we can use the up/down
arrows, and go back to the search op�on again to start the search.
By pressing OK key on the keyboard, the search screen will be displayed,
Con�nue to the following pages to explain the details of the search screen.

18
A�er comple�ng the ini�al se�ngs, and pressing the OK bu�on, a warn-
ing window will appear, as shown below. Press the Start bu�on on the top
of the wireless handle or the OK bu�on on the keyboard to start the
calibra�on and enter the search screen.

Note: In order to reset the calibra�on, press the

start bu�on on the handle and wait 5 seconds
for the reset process to complete. Always try to
keep the device horizontal.

Start Bu�on

19
 A�er comple�ng the ini�al se�ngs, and skipping the previous warning,
the search screen will appear.

Screen descrip�on:
Search screen: This screen shows us within the large box the ongoing
search process according to the previously selected se�ngs.
Balance indicator: This indicator shows the balance of the device in
rela�on to the direc�on of the horizon. To get a be�er result when search-
ing, this indicator (red line) should be on the green line in the middle.
Scanning: In this box, the search process is displayed for the type of target
pre-selected in the system se�ngs. When the device begins to find signals
close to the poten�al target, it will start to rotate around its axis towards
these signals.
Balance indicator

Search Screen
Scanning

20
 Adjust the ground balance Balance indicator

Scanning: In this box, the search process is

displayed for the type of target pre-selected
in the system se�ngs. When the device
begins to find signals close to the poten�al
target, it will start to rotate around its axis
towards these signals.
Scanning

Correct Balance Wrong Balance

The correct way to set the balance indicator (red indicator on the green
line): This indicator shows the balance of the device rela�ve to the direc-
�on of the horizon. To get a be�er result when searching, this indicator
(red line) should be on the green line in the middle.
21
 Search method
1: The search method according to the zigzag path in the event that the
device does not rotate: In the case of the ini�al or natural search, that is,
when there are no targets or signals picked up by the device in the current
search area, we must always advance according to the zigzag path, in
order for the device to capture and analyze as much signals as possible in
all direc�ons of the surrounding area.

We always recommend star�ng from the northern region of the target

search area. Un�l the device begins to rotate on its axis. Then the user
must follow the method of determining the target area, which is
described in Paragraph 2.
22
2: Determine the target area if the device rotates:
Suppose that we are now advancing in the specified search area
through the winding path, and at some point in this path the device
begins to rotate around its axis to the right or to the left. .

We always advise that we move as slowly as possible when the device

starts to rotate, and we hold the device firmly and make sure of the
direction of the device’s rotation and follow it correctly.. in order to
ensure a correct and accurate search process.
23
 We continue to follow the
direction of rotation of the
device, until the device
begins to rotate around its
axis for more than 90
degrees. Then we mark
this point.

We go back in the opposite

direction slowly until the device
rotates around its axis again for
more than 90 degrees, we put a
mark at this point as well.. We
repeat this process from different
directions of the search area and
we put a mark at every point
where the device rotates.
We will notice that it has begun to form a rough outline of the target
area. We will notice that the device is always rotating towards a specific
point or area.
24
We move away a little from the drawn area and start heading from the
northern side towards it. At every point where the device rotates more
than 90 degrees, we draw a new transverse line. We repeat this process
from the four sides of the target area. We will see that a square or rectan-
gular drawing of this area begins to form. Let's say this area is (X).
We follow the next step (the process of verifying the target area) to
confirm and limit the target area more accurately.
25
 3: The process of verifying the target area:
We start by moving from area (X) a few meters towards the north and
select a new point (A), then we move from the right and left of this point
towards area (X). If the direction of rotation of the device in both cases is
towards the area (X), this means that the area (X) is the potential area for
the target’s presence.

(A) (A)

(X) (X)

First search Second search First search Second search

26
In order to be�er limit the target area, we repeat the previously
men�oned process in more than one different direc�on of the poten�al
target area (X).
If the direc�on of rota�on of the device is always in the direc�on of point
(X), this means that point (X) is the poten�al area where the target is
located.
A1

A2 A3

We always recommend that we proceed as slowly as possible while

researching this situa�on.
27
 Se�ngs
We can access the device se�ngs from the main menu. To enter any
sec�on of the se�ngs, we stand on the selected sec�on and press the
OK bu�on on the device keyboard. The device se�ngs sec�ons are:
Time - display - sound - language - info
• Time:
We can use this sec�on to set
the device clock �me. To
change the �me, press the OK
bu�on on your keyboard once
to move to the Time sec�on.
The clock number will then
change to red. Use the Up and
Down keys to change the clock.
To move to the minutes pane,
press the right key, and use the up and down keys to adjust the minutes.

When you turn on the device for the first �me, the language se�ng
screen will appear. We choose the appropriate language for us, a�er
which the main screen of the Water Line device will appear.

28
 • Display:
In this sec�on of the device
se�ngs, we can see the se�ngs
related to the screen such as
sleep mode, screen brightness,
and smart sensor light.

- Sleep Mode:
With this op�on, the device screen will go to sleep mode and turn off if
the device is not used for one minute. To turn the screen back on again,
tap a key on the keyboard. To turn the sleep op�on on or off, we press the
le� / right keys on the keyboard.

- Brightness:
Use this op�on to adjust the screen brightness level.
You can increase or decrease the brightness of the device's screen using
the le�/right keys.
29
 - Sensor LED:
By turning this op�on on, the ligh�ng indicator of the smart sensor will be
turned on during the search, as the user can see the search results of the
mul�ple device systems also through the color of the sensor light.
The blue color indicates that there are signs indica�ng the presence of
water of the type that we previously specified in the se�ngs.
As for the normal search case, we will see the sensor not illuminated, as
shown in the pictures below.

normal search presence of water

• Sound:
In this sec�on, the user can control
the volume of various sounds
made by the device, such as the
general sound of the device, the
sound of keyboard clicks, and the
sound of a running scan.

30
• Language:
The device interface is available in 8 languages:
English - German - Spanish - French - Russian - Italian - Arabic - Persian

We can change the language of the device, a�er entering the language
se�ngs sec�on, using the le� / right keys of the keyboard. (With every
click the device language changes instantly).
31
 • Informa�on:
In this sec�on, the user can see the complete informa�on of the device.
(This page's values cannot be changed).

A�er you have finished adjus�ng the se�ngs, you can return to the
main menu by clicking the “Back” bu�on on the keyboard.

32
 Wireless handle charging
This device is equipped with an RF system for wireless communica�on
between the device and the handle. A�er prolonged and intensive use of
the device and the handle, the capacity and charge of the handle may
decrease. Here is how to charge the handle.

Charging LED Light Charging Socket

Use a Type-C charger to

The charging LED light will be
1 2
charge the wireless handle
colorless when the handle is in by plugging it into charging
the non-charging state. socket on side of handle.

33
 Please pay a�en�on to charge the handle of the device, at least once,
for a minimum of 5 to 10 minutes, before use.

Charging LED Charging LED

The charging LED next to the

3 charging socket, will light red, that
means the handle is charging 4 The light turns green when the
handle is fully charged

34
Technical specifica�ons

Typ e : TFT L C D H M I
Screen
S i ze : 3.5 Inch
R e so l u t i o n : 480 x 320
C o l o r: 64 K 65536
B a ck L i g h t : LED

Ou t p u t : S p e a ke r + H e a d s e t
Sound
Ja ck Typ e : 3 .5 mm
I n te r n a l S p e a ke r: 3W

Input: 100 - 220 V 50 / 60 Hz

Charger
Ou t p u t : 5 V - 3 A
S o cke t : Ty p e -C

Typ e : Lithium Ion

Battery
Input: 5 V - 2. 5 A
C a p a ci t y: 9 6 0 0 mA
R e m o va b l e B a t t e ry: No

35
 Ty p e : ARM
CPU
F re q u e n cy: 72 MHz

Typ e : SD
Memory
Ca p a city: 2 GB

Dime n sio n : 4 0 0 m m X 3 0 0 mm X 1 6 0 mm
Package
We ig h t: 3200 g

Op e ra tin g te mp . 0 - 40 C
Temperature
Ra tio n : Ye s

F la s h L ED: 5 mm
Other
Ra tio n : Ye s

36
 Important warnings before use
1. Do not install or assemble the device without reading this user manual.
2. No part of the Device may be disassembled or repaired except by
Geoground or its authorized service centers.
Any disassembly of the Device or any of its parts by any person or en�ty
not authorized by Geoground; to void the device warranty.
3. Make sure that there are no metals of any kind while using the device.
4. Do not store the device and its components at low or high temperatures
for long periods.
5. It is preferable not to use a different charger than the original charger for
the device (you can request another original charger for the device in case
the original charger is lost).
6. Please protect the device and all its accessories from water, extreme
heat and harsh condi�ons.
7. In order for the ba�ery life to last longer try to charge the ba�ery at
least once a month.
37
water line
detect all types of groundwater

www.Geo-Ground.com