TEL: 708/594-1700

FAX: 708/458-0106
www.weldbend.com 90° Elbows

Outside Inside Wall Center Pipe Approx. SHORT RADIUS

Pipe Diameter Diameter Thickness to End
Size Schedule
Number
Weight in
Pounds
SCHEDULE STD
O.D. I.D. T C
1 1.32 1.054 0.133 1.00 40 0.30
1 1/4 1.66 1.380 0.140 1.25 40 0.40
1 1/2 1.90 1.610 0.145 1.50 40 0.50
2 2.38 2.072 0.154 2.00 40 1.00
2 1/2 2.88 2.474 0.203 2.50 40 2.00
3 3.50 3.068 0.216 3.00 40 3.00
3 1/2 4.00 3.548 0.226 3.50 40 4.30
4 4.50 4.026 0.237 4.00 40 6.10
5 5.56 5.044 0.258 5.00 40 9.70
6 6.62 6.060 0.280 6.00 40 16.70
8 8.62 7.976 0.322 8.00 40 32.40
10 10.75 10.020 0.365 10.00 40 56.30
12 12.75 12.000 0.375 12.00 * 79.40
14 14.00 13.250 0.375 14.00 30 104.00
16 16.00 15.250 0.375 16.00 30 129.00

FITTINGS
18 18.00 17.250 0.375 18.00 * 163.00
20 20.00 19.250 0.375 20.00 20 210.00 NOTES
24 24.00 23.250 0.375 24.00 20 297.00 1. Conforms to ASME B16.9 & ASTM A234 WPB.
❖ 30 30.00 29.250 0.375 30.00 * 470.00 2. All dimensions are in inches.
3. For bevel detail see page 107.
❖ 36 36.00 35.250 0.375 36.00 * 692.00 4. For dimensional tolerances see page 108.
❖ 42 42.00 41.250 0.375 42.00 * 967.00 5. For sizes larger than 48" please call.
6. All weights are in pounds and approximated
❖ 48 48.00 47.250 0.375 48.00 * 1340.00 or estimated.
* This size and thickness does not correspond
to any pipe schedule number.
❖ In accordance with B16.9. Special Fittings
paragraph 4.4.2.

Outside Inside Wall Center Pipe Approx. SHORT RADIUS

Pipe Diameter Diameter Thickness to End
Size Schedule
Number
Weight in
Pounds
SCHEDULE XS
O.D. I.D. T C
1 1.32 0.962 0.179 1.00 80 0.30
1 1/4 1.66 1.278 0.191 1.25 80 0.60
1 1/2 1.90 1.500 0.200 1.50 80 0.80
2 2.38 1.944 0.218 2.00 80 1.50
2 1/2 2.88 2.328 0.276 2.50 80 2.60
3 3.50 2.900 0.300 3.00 80 3.80
3 1/2 4.00 3.364 0.318 3.50 80 5.40
4 4.50 3.826 0.337 4.00 80 7.60
5 5.56 4.810 0.375 5.00 80 13.80
6 6.62 5.756 0.432 6.00 80 22.80
8 8.62 7.620 0.500 8.00 80 47.30
10 10.75 9.750 0.500 10.00 60 71.00
12 12.75 11.750 0.500 12.00 * 104.00
14 14.00 13.000 0.500 14.00 * 137.00
16 16.00 15.000 0.500 16.00 40 171.00
18 18.00 17.000 0.500 18.00 * 214.00
20 20.00 19.000 0.500 20.00 30 277.00 NOTES
24 24.00 23.000 0.500 24.00 * 390.00 1. Conforms to ASME B16.9 & ASTM A234 WPB.
❖ 30 30.00 29.000 0.500 30.00 20 632.70 2. All dimensions are in inches.
3. For bevel detail see page 107.
❖ 36 36.00 35.000 0.500 36.00 20 913.00 4. For dimensional tolerances see page 108.
❖ 42 42.00 41.000 0.500 42.00 * 1300.00 5. For sizes larger than 48" please call.
6. All weights are in pounds and approximated
❖ 48 48.00 47.000 0.500 48.00 * 1675.00 or estimated.
* This size and thickness does not correspond
to any pipe schedule number.
❖ In accordance with B16.9. Special Fittings
paragraph 4.4.2. 29

Copyright © 2010 by Weldbend Corporation. All Rights Reserved.

 90° Elbows
SHORT RADIUS Outside Inside Wall Center Pipe Approx.
Pipe Diameter Diameter Thickness to End
SCHEDULE 40 Size Schedule
Number
Weight in
Pounds
O.D. I.D. T C
1 1.32 1.054 0.133 1.00 40 0.30
1 1/4 1.66 1.380 0.140 1.25 40 0.40
1 1/2 1.90 1.610 0.145 1.50 40 0.50
2 2.38 2.072 0.154 2.00 40 1.00
2 1/2 2.88 2.474 0.203 2.50 40 2.00
3 3.50 3.068 0.216 3.00 40 3.00
3 1/2 4.00 3.548 0.226 3.50 40 4.30
4 4.50 4.026 0.237 4.00 40 6.10
5 5.56 5.044 0.258 5.00 40 9.70
6 6.62 6.060 0.280 6.00 40 16.70
8 8.62 7.976 0.322 8.00 40 32.40
10 10.75 10.020 0.365 10.00 40 56.30
12 12.75 11.938 0.406 12.00 40 80.00
14 14.00 13.124 0.438 14.00 40 105.00
16 16.00 15.000 0.500 16.00 40 130.00
FITTINGS

18 18.00 16.876 0.562 18.00 40 165.00

NOTES 20 20.00 18.812 0.594 20.00 40 215.00
1. Conforms to ASME B16.9 & ASTM A234 WPB. 24 24.00 22.624 0.688 24.00 40 300.00
2. All dimensions are in inches.
3. For bevel detail see page 107.
4. For dimensional tolerances see page 108.
5. For sizes larger than 24" please call.
6. All weights are in pounds and approximated
or estimated.

SHORT RADIUS Outside Inside Wall Center Pipe Approx.

Pipe Diameter Diameter Thickness to End
SCHEDULE 80 Size Schedule
Number
Weight in
Pounds
O.D. I.D. T C
1 1.32 0.962 0.179 1.00 80 0.30
1 1/4 1.66 1.278 0.191 1.25 80 0.60
1 1/2 1.90 1.500 0.200 1.50 80 0.80
2 2.38 1.944 0.218 2.00 80 1.50
2 1/2 2.88 2.328 0.276 2.50 80 2.60
3 3.50 2.900 0.300 3.00 80 3.80
3 1/2 4.00 3.364 0.318 3.50 80 5.40
4 4.50 3.826 0.337 4.00 80 7.60
5 5.56 4.810 0.375 5.00 80 13.80
6 6.62 5.756 0.432 6.00 80 22.80
8 8.62 7.620 0.500 8.00 80 47.30
10 10.75 9.562 0.594 10.00 80 75.00
12 12.75 11.374 0.688 12.00 80 105.00
14 14.00 12.500 0.750 14.00 80 140.00
16 16.00 14.312 0.844 16.00 80 175.00
18 18.00 16.124 0.938 18.00 80 215.00
NOTES 20 20.00 17.938 1.031 20.00 80 280.00
1. Conforms to ASME B16.9 & ASTM A234 WPB. 24 24.00 21.562 1.219 24.00 80 400.00
2. All dimensions are in inches.
3. For bevel detail see page 107.
4. For dimensional tolerances see page 108.
5. All weights are in pounds and approximated
or estimated.

30

Copyright © 2010 by Weldbend Corporation. All Rights Reserved.

TEL: 708/594-1700
FAX: 708/458-0106
www.weldbend.com 90° Elbows

Outside Inside Wall Center Pipe Approx. SHORT RADIUS

Pipe Diameter Diameter Thickness to End
Size Schedule
Number
Weight in
Pounds
SCHEDULE 160
O.D. I.D. T C
1 1.32 0.820 0.250 1.00 160 0.50
1 1/4 1.66 1.160 0.250 1.25 160 0.90
1 1/2 1.90 1.338 0.281 1.50 160 1.50
2 2.38 1.692 0.344 2.00 160 2.90
2 1/2 2.88 2.130 0.375 2.50 160 5.50
3 3.50 2.624 0.438 3.00 160 9.80
4 4.50 3.438 0.531 4.00 160 20.00
5 5.56 4.310 0.625 5.00 160 30.00
6 6.62 5.182 0.719 6.00 160 60.00
8 8.62 6.808 0.906 8.00 160 125.00
10 10.75 8.500 1.125 10.00 160 258.00
12 12.75 10.126 1.312 12.00 160 455.00
14 14.00 11.188 1.406 14.00 160 550.00
16 16.00 12.812 1.594 16.00 160 800.00
18 18.00 14.438 1.781 18.00 160 1025.00

FITTINGS
20 20.00 16.062 1.969 20.00 160 1295.00
24 24.00 19.312 2.344 24.00 160 1450.00 NOTES
1. Conforms to ASME B16.9 & ASTM A234 WPB.
2. All dimensions are in inches.
3. For bevel detail see page 107.
4. For dimensional tolerances see page 108.
5. All weights are in pounds and approximated
or estimated.

Outside Inside Wall Center Pipe Approx. SHORT RADIUS

Pipe Diameter Diameter Thickness to End
Size Schedule
Number
Weight in
Pounds
SCHEDULE XXS
O.D. I.D. T C
1 1.32 0.604 0.358 1.00 * 0.65
1 1/4 1.66 0.896 0.382 1.25 * 1.30
1 1/2 1.90 1.100 0.400 1.50 * 1.70
2 2.38 1.508 0.436 2.00 * 3.20
2 1/2 2.88 1.776 0.552 2.50 * 6.10
3 3.50 2.300 0.600 3.00 * 11.00
4 4.50 3.152 0.674 4.00 * 22.00
5 5.56 4.060 0.750 5.00 * 35.00
6 6.62 4.892 0.864 6.00 * 60.00
8 8.62 6.870 0.875 8.00 * 123.00
10 10.75 8.750 1.000 10.00 140 225.00
12 12.75 10.750 1.000 12.00 120 365.00

NOTES
1. Conforms to ASME B16.9 & ASTM A234 WPB.
2. All dimensions are in inches.
3. For bevel detail see page 107.
4. For dimensional tolerances see page 108.
5. All weights are in pounds and approximated
or estimated.
* This size and thickness does not correspond
to any pipe schedule number.

31

Copyright © 2010 by Weldbend Corporation. All Rights Reserved.