EPC 300 PLUS

NOW WITH GREATER

DURABILITY AND
EASIER APPLICATION
INDUSTRIAL FLOORS AND CARPARKS
J OT U N E P OX Y F L O O R I N G
O F F E RS G R E AT ER
D U R A B I LI T Y W I T H
L O NG - L A S T I NG S U PP O R T

Jotafloor EPC 300 PLUS is one of the most FEATURES & BENEFITS
well-rounded products on the market
SUPERIOR INCREASED
to date with improved longevity, strength, MECHANICAL DURABILITY AND
performance, and pot life. Jotafloor EPC PROPERTIES LONGEVITY
300 PLUS has improved leveling properties,
making application fast and efficient. LONGER HASSLE-FREE
POT LIFE APPLICATION
It offers outstanding mechanical properties
in a wide variety of environments. EXCEPTIONAL MULTIPLE
TECHNICAL USAGE
SERVICE AREAS

With the new Jotafloor EPC 300 PLUS, your business

has the foundation for success. Jotafloor EPC 300
PLUS offers you both durability and support from
the start of your project, past the finish. Our technical
service team is dedicated to helping you through
every aspect of the installation, treatment, and post-
treatment process to ensure your floors will last.
We understand that choosing a floor isn’t about
its immediate installation; it’s about all the spills,
heavy wheels, and much more, that your floors will
see daily. That’s why we are here to support you.

jotunprofessionals.com
HIGH-PERFORMANCE COATINGS

Content:

- Company profile
- Jotun MS
- TDS (Technical Data Sheet)
- Test Certificates
- MSDS (Material Safety Data Sheet)
- Previous approval
- Color card
COMPANY
PROFILE

EGYPT
Jotun Company Profile - Egypt

TABLE OF CONTENTS

01
ABOUT JOTUN 03
A truly global player today 05
Jotun Values 06
Future Tallest 20 Skyscrapers 07

02
OUR BUSINESS SEGMENTS 09
Decorative Paints 11
Marine Coatings 12
Powder Coatings 13
Protective Coatings 14

03
MIDDLE EAST, INDIA AND AFRICA 17
Presence in MEIA 18
Trusted to protect high profile projects in MEIA 19

04
TECHNICAL SERVICE AND GBS 21
Technical Service 22
Green Building Solutions 23

05
JOTUN EGYPT 25
About Jotun Egypt 26
Local Project References 27

01 02
Jotun Company Profile - Egypt

01 ABOUT JOTUN

We are a global paint and coating solutions company,

established in Sandefjord, Norway in 1926.

With more than 90 years in

paints and coatings industry we
have always been a partner for
all your projects, from concept to
completion and beyond.
At Jotun, we protect property by providing solutions
that not only enhance the appearance of your asset
but also ensures long-lasting durability.

03 04
Jotun Company Profile - Egypt

A TRULY GLOBAL JOTUN VALUES

PLAYER TODAY Our four values Loyalty, Care, Respect and Boldness are the
solid building blocks of our Penguin Spirit.

Loyalty Care
• Reliable and trustworthy. • Help and support others.
• Long term relationships between • Display trust and empathy.
customers, Jotun and colleagues.
• Appraise and judge fairly.
• Commitment to Jotun’s values,
• Protect internal and external
strategies, policies and decisions.
environment.

Respect Boldness
• Value differences in people. • Take initiatives to create the
future.
• Be honest and fair.
• Initiate and nurture change.
• Build diverse teams across culture
and gender. Follow laws and • Communicate openly, honestly
regulations. and with integrity.
• Treat others the way they expect • Be proactive.
to be treated.
• Address difficulties constructively.

Business Ethics and Integrity

Every year, the business world becomes more competitive, meaning that companies need to

39 100
operate more efficiently and effectively. In this framework, Jotun believes that integrity is more
important than ever. That’s why we place responsible attitudes and ethics at the heart of the way
we run our operations.
Production Facilities Countries Anti-corruption:
• Jotun works actively against corruption. As a global, responsible player, Jotun takes part in the
combat against corruption.
• Corruption and bribery are threats to economic development, global poverty and our integrity and
we owe it to our customers, the local communities, our shareholders and our employees, to

10,000 7 maintain high ethical standards.

• At Jotun we believe that openness, discussion and training is the best way of creating the right
Employees Research and attitudes. In addition to rules and guidelines for behavior, Jotun therefore puts great emphasis on
practical training. Only when our employees have discussed things openly and trained in how to act
Development Centers when facing a dilemma, can the right and sound business decision can be made.
• Jotun works actively against corruption!

05 06
Jotun Company Profile - Egypt

FUTURE TALLEST
20 SKYSCRAPERS

Burj Khalifa

1 Dubai, UAE
Powder, Decorative & Protective

Makkah Royal Clock Tower Hotel

3 Mecca, Saudi Arabia

Protective
Guangzhou CTF Finance Centre

2 Shanghai Tower
Shanghai, China
5 Lotte World Tower
Seoul, Korea
7 Guangzhou, China
Protective 13 Lakhta Center
St. Petersburg, Russia

Powder & Decorative

Taipei 101

10
Ping An Finance Center Tianjin CTF Finance Centre

4 8
Taipei, Taiwan
Shenzen, China Tianjin, China Petronas Tower 2
Powder
Powder & Protective Protective
International Commerce 14 Vincom Landmark 81
Ho Chi Minh City, Vietnam
17 Kuala Lumpur, Malaysia
Decorative

6 One World Trade Center

New York City Citic Tower 12 Centre
Hong Kong Suzhou IFS

9 Beijing, China
Protective
15 Changsha IFS Tower T1
18 Suzhou, China
Protective

20
Changsha, China
Shanghai World The Exchange 106

11 Financial Center
Shanghai, China
Protective

Petronas Tower 1

16 Kuala Lumpur, Malaysia

Decorative
19 Zifeng Tower
Nanjing, China

*Credit to CTBUH

07 08
 Jotun Company Profile - Egypt

02 OUR BUSINESS SEGMENTS

01 02 03 04

DECORATIVE MARINE PROTECTIVE POWDER

PAINTS COATINGS COATINGS COATINGS

09 10
Jotun Company Profile - Egypt

01. DECORATIVE PAINTS 02. MARINE COATINGS

For iconic buildings. And beautiful homes. High quality and advanced technology products for corrosion,
hull protection and beautification.

Jotun is a leading provider of coating solutions to the global marine fleet. Our Hull
Performance Solution is unique - with an objective and transparent way of measuring
hull performance along with a guaranteed maximum speed loss.

Our antifouling solutions are regarded as the best

in the market - which along with our Onboard
Maintenance Solution offers significant cost savings
for the shipping industry.
From extensive experience in the marine industry and continuous close collaboration
with our customers, we are able to innovate and build unique solutions to fit your
specific needs in the market today.

Jotun Decorative Paints manufactures, sells, and distributes interior

and exterior paints to professionals and consumers worldwide.

As a recognised brand, Jotun is trusted

and recommended by leading developers
and architects.
In order to ensure the highest quality and performance, the
products have been carefully selected by design professionals and
trend experts, and backed by an extensive network of dealers.
Jotun works closely with well-loved and recognised brands from
around the globe, including Majestic, Fenomastic, and Lady.
11 12
 Jotun Company Profile - Egypt

03. POWDER COATINGS 04. PROTECTIVE COATINGS

From concept to completion and beyond. Global experience – local presence.

Jotun Protective Coatings’ solutions are engineered to add value to operations in energy,
offshore, infrastructure, and onshore oil and gas facilities. Ranges like Thermosafe enhance
performance and safety, even in the extreme environments of onshore oil and gas. This
ensures that even the construction phase runs seamlessly.

Our NORSOK compliant maintenance system for brush and

roller allows for fewer coats, meaning less time is needed
Jotun Powder Coatings has proven its ability for costly offshore maintenance.
to offer advanced and technically sound
products for over half a century. Across a range The solution can also contribute to extending the maintenance intervals by 50 percent. Our
of industries such as Architecture, Pipelines, focus on green building solutions (GBS) enables us to deliver full paint systems including
Energy and other metal fabrication industries. passive fire protection and intumescent coatings according to international standards as LEED,
helping infrastructure projects become greener. The unique mesh-free epoxy, PFP Jotachar, is
As one of the leading groundbreaking – allowing for more than 40% time saving and reduced complexity both for
powder coating companies onshore and offshore applications. Our long track record of general corrosion protection in the
harshest environments worldwide, combined with our tailor-made and value-adding solutions, give
in the world today, with 10 us a unique global position.
powder factories worldwide,
we appreciate the need
for finishing options that
are equally beautiful and
environmentally responsible.
We understand the expectations and
challenges of these markets and know that our
solutions need to cater to the combination of
both aesthetics and functionality. Our products
and solutions are specifically designed to be
decorative, yet provide maximum protection.
We are aware that our customers are sensitive
to the environment, and so we specifically
design and create products and solutions that
truly make a difference.

13 14
Jotun Company Profile - Egypt

04.PROTECTIVE COATINGS
Global experience – local presence.

We provide a range of
protective coatings covering
the below properties:
• Top coats
• General Anti-Corrosive
• Intumescent
• Flooring
• Zinc-Rich primers
• Chemical Resistance
• Temperature Resistance
• Mechanical Resistance
• Anti-Fouling
• Epoxy Passive Fire Protection
(PFP)

15 16
Jotun Company Profile - Egypt

03 PRESENCE IN THE MIDDLE

EAST, INDIA & AFRICA

9 Paint Factories

3 Powder Factories

15 Companies

41 Countries

2813 Employees

17 Paint Factory Powder Factory Sales Company / Office 18

Jotun Company Profile - Egypt

TRUSTED TO PROTECT HIGH PROFILE

PROJECTS FROM ACROSS MEIA

King Abdulaziz International Airport, KSA Grand Museum, Egypt

Burj Khalifa, Dubai Louvre, Abu Dhabi

19 20
Oman Convention Centre Statue of Unity, India Dubai Metro Arcapita Bank, Bahrain
Jotun Company Profile - Egypt

04 TECHNICAL SERVICE

At Jotun, we believe in building long term

relationships with our customers whether they are
corrosion engineers, petrochemical plant owners, oil
companies, consultants or maintenance managers.

In the MEIA region, Jotun has the largest technical service team comprising of more
than 100 qualified Coating Advisers & Specialists. They provide both on-site & off-site
technical service & support in some of the most challenging situations.

21 22
Jotun Company Profile - Egypt

GREEN BUILDING DESIGN.

EASY WITH PAINTS AND COATINGS.
EASIEST WITH JOTUN.

We understand that green building certification and accreditation is an

increasingly important and highly regarded aspect for architects, engineers
and owners to consider for the construction and maintenance of properties.

Our products contribute to the earning of LEED

points in a streamlined, easy and effective way
through our Green Building Solution.
Learn more at jotungbs.com.

23 24
Jotun Company Profile - Egypt

05 JOTUN EGYPT
Multinational Supplier with Local
Production & Service Facilities Started Production in Production Capacity per year: New factory under
construction: a capacity of
1986 60 Million Liters
(more than 34 years) (existing Ismailia factory) 88 Million Liters
(one shift, middle of 2022)

Number of Employees More than 30 Internationally Storage capacity

certified Coating Advisors; +2
> 400 Million Liters
FROSIO & NACE (water & solvent base)

Premises Health & Safety certifications

Cairo (HQ), Alexandria, Asuit, include the below
Hurghada, Ismailia (factory) ISO 14001 & ISO 9001 in 2015
10th of Ramadan city ISO 45001 in 2018

25 26
Jotun Company Profile - Egypt

LOCAL PROJECT REFERENCES

Infrastructure

Almasa Alamein Cap Floor Grand Museum

New Parliament Mahsama Water Plant

27 28
Graeco-Roman Museum Katamya Mall Canal Sugar Factory Capital Fence Park
Jotun Company Profile - Egypt

LOCAL PROJECT REFERENCES

Energy

Beni Suef Power Plant (4800 MW) Zohr Gas Plant

Burullus Power Plant (4800 MW) Ethydco Complex

29 30
6TH October Power Plant (650 MW) PFP West Nile Delta ERC Rup – Zohr Deep Water Offshore
Method Statement

Method Statement –AIB

Document information
Division/Function/Company: Projects/TSS/JOTUN Project Owner:
Main Contractor: Project Manager:
Paint Applicator: Consultant:
Prepared by: Eslam Ahmed Date: 30-08-2023

Dear Project Manager

Surface Preparation

1. Ensure that the substrate is cured, and the moisture content is below 5%
2. Use Captive Shot Blasting to prepare the surface.
3. Clean the whole surface well.
4. Repair cracks (If existed).
5. Substrate should have sufficient strength to receive the paint. Any defects in the substrate
like surface undulations, cracks, pin holes etc., should be rectified/filled (Epoxy filler-
Jotafloor Screed) before starting painting.

- Surface Preparation

- The concrete substrate should be at least 28 days old and should have a minimum
compressive strength of 25 Mpa or 3626 psi. The pull of strength of the substrate should
be 1.5 mpa or 218 psi.

- Ensure that the substrate is cured and the moisture content not exceed 4%
- applying any coating before this time will greatly increase the chance of the coating de-
bonding. The moisture content of the concrete should be checked prior to the
application of the coating and should not be greater than 5%. Concrete substrates
should be mechanically prepared to leave a clean, sound and dry base on which a
coating system can be applied. Clean – Free of oils, grease, dust, dirt, chemicals, loose
coating, curing compounds.

- Use Captive Shot Blasting, Triple desk machine, Diamond disc grinding and mechanical
hand tool to prepare the surface.
- smooth floor will not allow the epoxy to adhere well
- Sweep oí vacuum the whole surface well.
- As a final comment, the thickeí the system that you plan to apply the deepeí the
píepaíation needs to be. ľhis holds also vice veísa. If you scaíify a suíface, you need a
thick coating to coveí that suíface. A thin epoxy coat will not be able to fully coveí the
heavily scaííed píofile. (please refer back to Jotun TSS on the beginning of suíface
píepaíation )

Page 1 of 2
Method Statement

- Floor levelling.
- A slurry from Jotafloor Non-Slip aggregate and Jotafloor SF Pr150 can be used for
levelling and flooring defects
- Mix ratio 1 Ltr from Jotafloor SF Pr150 to 5 Kg from Jotafloor Non-Slip aggregate
- For walls, cement patty could be used for defect repairing before paint

Page 2 of 2
Method Statement

Recommended Paint systems

- 1) Light duty - Parking floor Area (Interior flooring system):

• Ensure the surface preparation had been accomplished as mentioned previously.

- Apply one coat Jotafloor EPC 300 Plus – (diluted with thinner to use as primer)
- This is a two-component amine cured solvent free epoxy coating. It is a high-performance product. It is a self-
smoothing, easy to apply product, leaving a seamless surface. It has excellent chemical, abrasion and impact
resistance. If enhanced slip resistance is required Jotafloor Non-Slip can be used in the system. To be used
as finish coat in atmospheric environments. Can be applied directly in two coats or on approved primers
depending on the conditions of the concrete substrate.

- Apply Jotafloor Sf Pr150 – Spreading rate 9.8 m2/L per coat. to be used as a putty after
add suitable filler like (calcium carbonate, barium sulphate) according to substrate
condition
- This is a two-component amine cured solvent free epoxy coating. It ensures very good adhesion on most.
concrete floors in atmospheric environments only. To be used as primer in atmospheric environments.
Specially designed for high build floor coatings on properly prepared concrete floors and walls.

- Apply one coat Jotafloor EPC 300 Plus, – Spreading rate 6.5 m2/L per coat --(150 µm).
- This is a two-component amine cured solvent free epoxy coating. It is a high-performance product. It is a self-
smoothing, easy to apply product, leaving a seamless surface. It has excellent chemical, abrasion and impact
resistance. If enhanced slip resistance is required Jotafloor Non-Slip can be used in the system. To be used
as finish coat in atmospheric environments. Can be applied directly in two coats or on approved primers
depending on the conditions of the concrete substrate.

- Apply one coat Jotafloor EPC 300 Plus, – Spreading rate 6.5 m2/L per coat --(150 µm).

Or

- Apply one coat Jotafloor Topcoat E – Spreading rate 6.5 m2/L per coat.
- This is a two-component amine cured solvent free epoxy coating. It is a high-performance product. It is
easy to apply. This product is tintable in a wide range of colours in Jotun's Multicolor Industry (MCI) system.
It has excellent chemical, abrasion, and impact resistance. If enhanced slip resistance is required Jotafloor
Non-Slip can be used in the system. To be used as topcoat in atmospheric environments. Suitable on
approved primers on concrete substrates.
Method Statement

- 1) Medium duty - Driving way floor Area (Interior flooring system):

• Ensure the surface preparation had been accomplished as mentioned previously.

- Apply one coat Jotafloor EPC 300 Plus – (diluted with thinner to use as primer)
- This is a two-component amine cured solvent free epoxy coating. It is a high-performance product. It is a self-
smoothing, easy to apply product, leaving a seamless surface. It has excellent chemical, abrasion and impact
resistance. If enhanced slip resistance is required Jotafloor Non-Slip can be used in the system. To be used
as finish coat in atmospheric environments. Can be applied directly in two coats or on approved primers
depending on the conditions of the concrete substrate.

- Apply Jotafloor Sf Pr150 – Spreading rate 9.8 m2/L per coat. to be used as a putty after
add suitable filler like (calcium carbonate, barium sulphate) according to substrate
condition
- This is a two-component amine cured solvent free epoxy coating. It ensures very good adhesion on most.
concrete floors in atmospheric environments only. To be used as primer in atmospheric environments.
Specially designed for high build floor coatings on properly prepared concrete floors and walls.

- Apply one coat Jotafloor EPC 300 Plus, – Spreading rate 5 m2/L per coat --(200 µm).
- This is a two-component amine cured solvent free epoxy coating. It is a high-performance product. It is a self-
smoothing, easy to apply product, leaving a seamless surface. It has excellent chemical, abrasion and impact
resistance. If enhanced slip resistance is required Jotafloor Non-Slip can be used in the system. To be used
as finish coat in atmospheric environments. Can be applied directly in two coats or on approved primers
depending on the conditions of the concrete substrate.

- To achieve anti slip surface, please refer to TDS (Jotafloor Non slip aggregates), Spread Jotafloor
Non-Slip Aggregate while the previous coat is wet.- (500 µm).

- Apply one coat Jotafloor EPC 300 Plus, – Spreading rate 6.5 m2/L per coat --(150 µm).

Or

- Apply one coat Jotafloor Topcoat E – Spreading rate 6.5 m2/L per coat.

- In case of UV resistance add:

• Apply One coat Jotafloor PU Topcoat, Spreading rate 7.3

m2/L.

• Apply One coat Jotafloor PU Topcoat, Spreading rate 7.3

m2/L.

• Ensure each coat had been dried to over coat – as TDS.

Page 3 of 2
Method Statement

- 3) Heavy Duty - External Ramps (Exterior flooring system):

- Ensure the surface preparation had been accomplished as mentioned
previously.
- Apply one coat Jotafloor EPC 300 Plus – (diluted with thinner to use as primer)
- This is a two-component amine cured solvent free epoxy coating. It is a high-performance product. It is a self-
smoothing, easy to apply product, leaving a seamless surface. It has excellent chemical, abrasion and impact
resistance. If enhanced slip resistance is required Jotafloor Non-Slip can be used in the system. To be used as
finish coat in atmospheric environments. Can be applied directly in two coats or on approved primers depending
on the conditions of the concrete substrate.

- Apply Jotafloor Sf Pr150 – Spreading rate 9.8 m2/L per coat. to be used as a putty after
add suitable filler like (calcium carbonate, barium sulphate) according to substrate
condition
- This is a two-component amine cured solvent free epoxy coating. It ensures very good adhesion on most.
concrete floors in atmospheric environments only. To be used as primer in atmospheric environments.
Specially designed for high build floor coatings on properly prepared concrete floors and walls.

- Apply one coat Jotafloor EPC 300 Plus, – Spreading rate 5 m2/L per coat --(200 µm).
- This is a two-component amine cured solvent free epoxy coating. It is a high-performance product. It is a self-
smoothing, easy to apply product, leaving a seamless surface. It has excellent chemical, abrasion and impact
resistance. If enhanced slip resistance is required Jotafloor Non-Slip can be used in the system. To be used as
finish coat in atmospheric environments. Can be applied directly in two coats or on approved primers depending
on the conditions of the concrete substrate.

- To achieve anti slip surface, please refer to TDS (Jotafloor Non slip aggregates), Spread Jotafloor
Non-Slip Aggregate while the previous coat is wet.- (500 µm).

- Apply one coat Jotafloor EPC 300 Plus, – Spreading rate 6.5 m2/L per coat --(150 µm).

- Topcoat:

- UV Resistance: Apply Two coats Jotafloor PU Topcoat, Spreading rate 6.5 m2/L-
totalDFT -(200 µm).

- This is a two-component isocyanate cured polyurethane coating. It is a high

performance, non-yellowing product. It is easy to apply. This product is tintable in a
wide range of colours in Jotun's Multicolor Industry (MCI) system.It has excellent gloss
and colour retention. It has good chemical, abrasion and impact resistance. If enhanced
slip resistance is required Jotafloor Non-Slip can be used in the system. To be used as
topcoat in atmospheric environments.

Paint System for Road marking:

- Apply Two coat Jotafloor lines– Spreading rate 8 m2/L. per coat.

Note: use Jotafloor EPC 300 Plus or Jotafloor Sf Pr 150 as a putty when needed
- Notes:
- According to concrete surface and surface condition using Epoxy Putty(Jotun Epoxy
Filler)

- In case of force majeure Jotafloor Topcoat E can be used instead of Jotafloor Epc 300
Plus,without any change in price or quality.

- To achieve anti slip if needed please refer to TDS.

- Thickness DFT each as per TDS

Notes and caution

• Observe the coating is free from defects, discontinuities, insects and spent abrasive
media and other contamination.

• Observe the coating is free from misses, sags, runs, wrinkles, mud blistering, blistering,
obvious pinholes, excessive dry spray, heavy brush marks and excessive film build.

• Do not apply the coating in high wind conditions.

• Concrete expands and contracts due to the change in temperature; This

expansion/contraction need to be allowed by the provision of expansion joints, control
joints etc.

• Joints are normally filled with joint sealants like poly sulphide, polystyrene sealants etc.

Best regards,
Eng. Eslam Ahmed
Project Sales Executive -
Flooring Projects Department
[email protected]
Mobile: 01204448962

Page 4 of 2
 Technical Data Sheet

Approved 1,5 46802 epoxy ^(ValidationDate) 1

Jotafloor EPC 300 Plus

Product description
This is a two component amine cured high volume solid, low VOC epoxy coating. It is a self smoothing, easy to
apply product, leaving a seamless surface. With Jotafloor Non Slip aggregates, enhanced slip resistance is
possible. To be used as finish coat in atmospheric environments.

Typical use
Designed for a wide range of floors with various levels of mechanical exposure. Recommended for workshops,
carparks, garages, factories, laboratories, aircraft hangars and plant rooms where nonslip properties are
required.
Other

Approvals and certificates

Determination of Compressive Strength - ASTM C579 and BS 6319-2
Determination of Tensile Strength - ASTM C307
Determination of Flextural Strength - ASTM C580 and BS 6319-3
Determination of Taber Abrasion (1000 Cycles) - ASTM D4060:2010
Determination of Shore D Hardness - ASTM D2240:2005
Determination of Chemical Resistance - ASTM D543
All the tests were carried out at 23±2 °C and 60±5% RH (Relative Humidity). For more details refer test
certificate.

For details about chemicals, refer to the test certificate.

Additional certificates and approvals may be available on request.

Colours
According to colour card

Product data
Property Test/Standard Description

Solids by volume ISO 3233 97 ± 2 %

Gloss level (GU 60 °) ISO 2813 Gloss (Above 70)
Flash point ISO 3679 Method 1 100 °C
Density calculated 1.6 kg/l
VOC-US/Hong Kong US EPA method 24 (tested) 30 g/l
(CARB(SCM)2007, SCAQMD rule 1113, Hong Kong)

The provided data is typical for factory produced products, subject to slight variation depending on colour.
All data is valid for mixed paint.
Gloss description: According to Jotun Performance Coatings' definition.

Date of issue: 18 November 2020 Page: 1/6

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
Technical Data Sheet
Jotafloor EPC 300 Plus

Film thickness per coat

Typical recommended specification range

Dry film thickness 200 - 500 μm

Wet film thickness 200 - 500 μm
Theoretical spreading rate 4.9 - 1.96 m²/l

Spreading rate depends on film thickness applied, type of texture, surface porosity, imperfections, temperature,
wastage during painting etc.

Surface preparation
To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any
contamination.

Surface preparation summary table

Surface preparation

Substrate Minimum Recommended

Coated surfaces and Clean, dry and undamaged compatible Clean, dry and undamaged compatible
Concrete coating as per SSPC SP13/NACE NO 6 coating as per SSPC SP13/NACE NO 6
/ASTM D4258 -05 /ACI 503.6R- /ASTM D4258 -05 /ACI 503.6R-
97/SSPC-TR 5/ICRI TECHNICAL 97/SSPC-TR 5/ICRI TECHNICAL
GUIDELINE 03741/NACE02203 GUIDELINE 03741/NACE02203

Laitance deposits are best removed by Planetary diamond disc grinder or by captive blasting followed by vacuum
cleaning to remove dust debris. For old concrete, Jotun technical team should visit the site and appropriate
surface preparation methodology should be recommended and that is to be followed.

Application
Application methods
The product can be applied by

Brush: Recommended to paint corners and edges.

Roller: Use small fibre pile 2 roller.

Conditions during application :

The temperature of the substrate should be minimum 15 °C and at least 3 °C above the dew point of the air,
measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure proper
drying. The moisture content in the substrate should not exceed 4 % (by weight). The coating should not be
exposed to oil, chemicals or mechanical stress until fully cured.
This product should not be applied on to the surfaces which are known to, or likely to suffer from, rising
dampness, potential osmosis problems or have a relative humidity greater than 80% as measured in accordance
with BS 8203 Appendix A.

Date of issue: 18 November 2020 Page: 2/6

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
Technical Data Sheet
Jotafloor EPC 300 Plus

Product mixing ratio (by volume)

Jotafloor EPC 300 Plus Comp A 4 part(s)

Jotafloor EPC 300 Plus Comp B 1 part(s)

No part mixing of this product.

Use a slow speed drill and mixing paddle.
The temperature of base and curing agent should be 18°C or higher when the paint is mixed.

Component A should be thoroughly stirred before component B is mixed. Mix both the components using a slow
speed drill and mixing paddle for 2 minutes. The entire content should be poured on to a third container and
edges of the container should be scraped. Mix the material for an additional 20 seconds. The mixed material
should be given an induction time of 3 minutes before application. Do not add solvent thinners at any time.

Thinner/Cleaning solvent
Cleaning solvent : Jotun Thinner No. 17

Thinning of the product is not recommended.

Drying and Curing time

Substrate temperature 15 °C 23 °C 40 °C

Surface (touch) dry 48 h 16 h 5.5 h

Walk-on-dry 48 h 18 h 6.5 h
Dry to over coat, minimum 48 h 24 h 8h
Dry to over coat, maximum, atmospheric 72 h 48 h 24 h
Dried/cured for service 14 d 7d 3d

Surface (touch) dry: The state of drying when slight pressure with a finger does not leave an imprint or reveal
tackiness.

Walk-on-dry: Minimum time before the coating can tolerate normal foot traffic without permanent marks,
imprints or other physical damage.

Dry to over coat, minimum: The recommended shortest time before the next coat can be applied.

Dry to over coat, maximum, atmospheric: The longest time allowed before the next coat can be applied.

Dried/cured for service: Minimum time before the coating can be permanently exposed to the intended
environment/medium.

Curing at lower temperature than recommended i.e. 15°C would result into blushing & blooming problem.
Exposure to water during curing process will result into adverse effect to the coating.

Surface (touch) dry: The state of drying when slight pressure with a finger does not leave an imprint or reveal
tackiness.

Walk-on-dry: Minimum time before the coating can tolerate normal foot traffic without permanent marks,
imprints or other physical damage.

Dry to over coat, minimum: The recommended shortest time before the next coat can be applied.

Dry to over coat, maximum, atmospheric: The longest time allowed before the next coat can be applied.

Dried/cured for service: Minimum time before the coating can be permanently exposed to the intended
environment/medium.

Date of issue: 18 November 2020 Page: 3/6

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
Technical Data Sheet
Jotafloor EPC 300 Plus

Induction time and Pot life

Paint temperature 23 °C

Induction time 3 min,

Recommended.

Pot life 25 min

Product compatibility

Previous coat: Jotafloor Sealer or Jotafloor SF PR 150 or Jotafloor Sealer HS

Subsequent coat: Jotafloor PU Topcoat or Jotafloor PU Topcoat HS or Jotafloor Topcoat or Jotafloor
Topcoat E

Recommended Systems
System 1:
Jotafloor SF PR 150 / Jotafloor Sealer HS Refer to product TDS
Jotafloor EPC 300 Plus 200 microns x 1 coat
Non-Slip Aggregates 0.50 - 1 kg per sqm
Jotafloor EPC 300 Plus 200 - 300 microns x 1 coat

System 2:
Jotafloor SF PR 150 / Jotafloor Sealer HS Refer to product TDS
Jotafloor EPC 300 Plus 500 microns x 1 coat

System 3:
Jotafloor EPC 300 Plus 200 - 300 microns x 1 coat
Non-Slip Aggregates 0.50 - 1 kg per sqm
Jotafloor EPC 300 Plus 200 - 300 microns x 1 coat

System 4:
Jotafloor EPC 300 Plus 200 microns x 2 coats

For System 3 & 4 (Direct to concrete application)

Surface preparation to be done as per the mentioned recommended guidelines:

For the direct application of Jotafloor EPC 300 Plus on to the concrete, firstly a thorough inspection of the
concrete should be carried out. All the repairs and imperfections should be carried out using Jotafloor Filler/
Jotafloor Filler Plus.

For porous concrete, a scrape coat of Jotafloor Filler or one or two coats of Jotafloor Sealer/ Jotafloor Sealer HS
is recommended before the application of Jotafloor EPC 300 Plus.

Packaging (typical)
Volume Size of containers
(litres) (litres)

Jotafloor EPC 300 Plus Comp A 14.4 20

Jotafloor EPC 300 Plus Comp B 3.6 5

The volume stated is for factory made colours. Note that local variants in pack size and filled volumes can vary
due to local regulations.

Date of issue: 18 November 2020 Page: 4/6

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
Technical Data Sheet
Jotafloor EPC 300 Plus

Storage
The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well
ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle
with care.

Shelf life at 23 °C
Jotafloor EPC 300 Plus Comp A 12 month(s)
Jotafloor EPC 300 Plus Comp B 12 month(s)

In some markets commercial shelf life can be dictated shorter by local legislation. The above is minimum shelf
life, thereafter the paint quality is subject to re-inspection.

Green Building Standards

The declared product contributes to Green Building Standard credits by meeting the following specific
requirements

LEED®v4 (2013) / LEED®v4 .1 (2019):

EQ credit: Low emitting materials
- VOC content for Floor Coatings (100 g/L) (CARB(SCM)2007) and emission less or equal to 0.5 mg/m3 (CDPH
method 1.2).
MR credit: Building product disclosure and optimization
- Material Ingredients, Option 2: Material Ingredient Optimization, International Alternative Compliance Path -
REACH optimization: Fully inventoried chemical ingredients to 100 ppm and not containing substances on the
REACH Authorization list – Annex XIV, the Restriction list – Annex XVII and the SVHC candidate list.
- Environmental Product Declarations. Product-specific Type III EPD (ISO 14025;21930, EN 15804).

BREEAM® International (2016)

- Hea 02: VOC exemplary emission CDPH method 1.2 (2017)) and the VOC content for Two-pack reactive
performance coatings for specific end use such as floors (80g/L).
- Mat 01: Product-specific Type III EPD (ISO 14025;21930, EN 15804).

BREEAM® International (2013)

- Hea 02: VOC content for Two-pack reactive performance coatings solvent based, for specific end use such as
floors (EU Directive 2004/42/CE).

Additional certificates and approvals may be available on request.

Caution
This product is for professional use only. The applicators and operators shall be trained, experienced and have
the capability and equipment to mix/stir and apply the coatings correctly and according to Jotun's technical
documentation. Applicators and operators shall use appropriate personal protection equipment when using this
product. This guideline is given based on the current knowledge of the product. Any suggested deviation to suit
the site conditions shall be forwarded to the responsible Jotun representative for approval before commencing
the work.

Health and safety

Please observe the precautionary notices displayed on the container. Use under well ventilated conditions. Do
not inhale spray mist. Avoid skin contact. Spillage on the skin should immediately be removed with suitable
cleanser, soap and water. Eyes should be well flushed with water and medical attention sought immediately.

Date of issue: 18 November 2020 Page: 5/6

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
Technical Data Sheet
Jotafloor EPC 300 Plus

Colour variation
When applicable, products primarily meant for use as primers or antifoulings may have slight colour variations
from batch to batch. Such products may fade and chalk when exposed to sunlight and weathering.

Colour and gloss retention on topcoats/finish coats may vary depending on type of colour, exposure
environment such as temperature, UV intensity etc., and application quality. Contact your local Jotun office for
further information.

Disclaimer
The information in this document is given to the best of Jotun's knowledge, based on laboratory testing and
practical experience. Jotun's products are considered as semi-finished goods and as such, products are often
used under conditions beyond Jotun's control. Jotun cannot guarantee anything but the quality of the product
itself. Minor product variations may be implemented in order to comply with local requirements. Jotun reserves
the right to change the given data without further notice.

Users should always consult Jotun for specific guidance on the general suitability of this product for their needs
and specific application practices.

If there is any inconsistency between different language issues of this document, the English (United Kingdom)
version will prevail.

Date of issue: 18 November 2020 Page: 6/6

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
 Technical Data Sheet

Approved 27120;27140 1,5 27120 epoxy ^(ValidationDate) 1

Jotafloor SF PR 150

Product description
This is a two component amine cured solvent free epoxy coating. It ensures very good adhesion on most
concrete floors in atmospheric environments only. To be used as primer in atmospheric environments. Specially
designed for high build floor coatings on properly prepared concrete floors and walls.

Typical use
It is a primer for all Jotafloor products. Specially designed for use with the traffic deck system for heavy duty
traffic, areas such as ramps, car parks, parking bays, pedestrian walkways, roof decks and industrial floors.
Recommended for cold stores, laboratories, hospitals, food and beverage plants, kitchens, high tech
manufacturing facilities, dairies, warehouses, factories and hangars. This product when used with Jotafloor Non
Slip Aggregates, is suitable for filling and repairing of cracks, undulations and surface imperfections.
Other

Approvals and certificates

Additional certificates and approvals may be available on request.

Colours
Hazy

Product data
Property Test/Standard Description

Solids by volume ISO 3233 98 ± 2 %

Gloss level (GU 60 °) ISO 2813 semi gloss (35-70)
Flash point ISO 3679 Method 1 100 °C
VOC-US/Hong Kong US EPA method 24 (tested) 64.5 g/l
(CARB(SCM)2007, SCAQMD rule 1113, Hong Kong)

The provided data is typical for factory produced products, subject to slight variation depending on colour.
All data is valid for mixed paint.
Gloss description: According to Jotun Performance Coatings' definition.

Film thickness per coat

Typical recommended specification range

Dry film thickness 150 - 300 μm

Wet film thickness 150 - 300 μm
Theoretical spreading rate 6.7 - 3.3 m²/l

Date of issue: 16 November 2020 Page: 1/5

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
Technical Data Sheet
Jotafloor SF PR 150

Surface preparation
To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any
contamination.

Surface preparation summary table

Surface preparation

Substrate Minimum Recommended

Concrete and Coated Minimum 4 weeks curing. Moisture Minimum 4 weeks curing. Moisture
surfaces content maximum 5 %. Prepare the content maximum 5 %. Prepare the
surface by means of enclosed blast surface by means of enclosed blast
shot or diamond grinding and other shot or diamond grinding and other
appropriate means to abrade the appropriate means to abrade the
surrounding concrete and to remove surrounding concrete and to remove
laitance. laitance.

Application
Application methods
The product can be applied by

Brush: Recommended
Roller: Recommended

Conditions during application :

The temperature of the substrate should be minimum 10 °C and at least 3 °C above the dew point of the air,
measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure proper
drying. The moisture content in the substrate should not exceed 4 % (by weight). The coating should not be
exposed to oil, chemicals or mechanical stress until fully cured.

Product mixing ratio (by volume)

Jotafloor SF PR 150 Comp A 3 part(s)

Jotafloor SF PR 150 Comp B 1 part(s)

This is a two-component product supplied as the base (Comp A) and the hardener (Comp B). Part mixing of
these components is still not acceptable and will affect both performance and appearance of the finished floor.
Comp A consists of light weight silica particles which floats on the surface. Before adding Comp B ( Harderner)
into comp A, these aggregates needs to be uniformly dispersed by using a slow speed mechanical agitator for a
period of 2 mins. Soon afterwards, add comp B and continue mixing for further 1 minute until a homogenous
mixture is obtained.

Date of issue: 16 November 2020 Page: 2/5

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
Technical Data Sheet
Jotafloor SF PR 150

Thinner/Cleaning solvent
Thinner: Jotun Thinner No. 17

Drying and Curing time

Substrate temperature 23 °C 40 °C

Surface (touch) dry 7h 3 h

Walk-on-dry 10 h 4 h
Dry to over coat, minimum 10 h 4 h
Dry to over coat, maximum, atmospheric 36 h 8 h
Dried/cured for service 3d 2d

Application in external areas and above 40 °C consult with Jotun representative for guidance.

Surface (touch) dry: The state of drying when slight pressure with a finger does not leave an imprint or reveal
tackiness.

Walk-on-dry: Minimum time before the coating can tolerate normal foot traffic without permanent marks,
imprints or other physical damage.

Dry to over coat, minimum: The recommended shortest time before the next coat can be applied.

Dry to over coat, maximum, atmospheric: The longest time allowed before the next coat can be applied.

Dried/cured for service: Minimum time before the coating can be permanently exposed to the intended
environment/medium.

Induction time and Pot life

Paint temperature 23 °C

Pot life 30 min.

40 min after poured on to the floor.

Product compatibility

Previous coat: epoxy

Subsequent coat: epoxy, polyurethane

Packaging (typical)
Volume Size of containers
(litres) (litres)

Jotafloor SF PR 150 Comp A 15 20

Date of issue: 16 November 2020 Page: 3/5

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
Technical Data Sheet
Jotafloor SF PR 150

Jotafloor SF PR 150 Comp B 5 5

The volume stated is for factory made colours. Note that local variants in pack size and filled volumes can vary
due to local regulations.

Storage
The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well
ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle
with care.

Shelf life at 23 °C
Jotafloor SF PR 150 Comp A 24 month(s)
Jotafloor SF PR 150 Comp B 24 month(s)

In some markets commercial shelf life can be dictated shorter by local legislation. The above is minimum shelf
life, thereafter the paint quality is subject to re-inspection.

Green Building Standards

This product contributes to the Green Buildings Standard credits. Please see section Green Building Standards.

LEED®v4 .1 (2019):

EQ credit: Low emitting materials

- VOC content for Two-pack reactive performance coatings solvent based (500 g/l) (EU Directive 2004/42/CE)
and emission lower than or equal to 0.5 mg/m³ (CDPH method 1.2).

LEED®v4 (2013) / LEED®v4 .1 (2019):

MR credit: Building product disclosure and optimization

- Material Ingredients, Option 2: Material Ingredient Optimization, International Alternative Compliance Path -
REACH optimization: Fully inventoried chemical ingredients to 100 ppm and not containing substances on the
REACH Authorization list – Annex XIV, the Restriction list – Annex XVII and the SVHC candidate list.
- Environmental Product Declarations. Product-specific Type III EPD (ISO 14025;21930, EN 15804).

BREEAM® International (2016)

Mat 01: Product-specific Type III EPD (ISO 14025;21930, EN 15804).

BREEAM® International (2013)

Hea 02: VOC content for Two-pack performance Coatings SB (500 g/l) (EU Directive 2004/42/CE).

Additional certificates and approvals may be available on request.

Caution
This product is for professional use only. The applicators and operators shall be trained, experienced and have
the capability and equipment to mix/stir and apply the coatings correctly and according to Jotun's technical
documentation. Applicators and operators shall use appropriate personal protection equipment when using this
product. This guideline is given based on the current knowledge of the product. Any suggested deviation to suit
the site conditions shall be forwarded to the responsible Jotun representative for approval before commencing
the work.

Health and safety

Date of issue: 16 November 2020 Page: 4/5

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
Technical Data Sheet
Jotafloor SF PR 150

Please observe the precautionary notices displayed on the container. Use under well ventilated conditions. Do
not inhale spray mist. Avoid skin contact. Spillage on the skin should immediately be removed with suitable
cleanser, soap and water. Eyes should be well flushed with water and medical attention sought immediately.

Colour variation
When applicable, products primarily meant for use as primers or antifoulings may have slight colour variations
from batch to batch. Such products may fade and chalk when exposed to sunlight and weathering.

Colour and gloss retention on topcoats/finish coats may vary depending on type of colour, exposure
environment such as temperature, UV intensity etc., and application quality. Contact your local Jotun office for
further information.

Disclaimer
The information in this document is given to the best of Jotun's knowledge, based on laboratory testing and
practical experience. Jotun's products are considered as semi-finished goods and as such, products are often
used under conditions beyond Jotun's control. Jotun cannot guarantee anything but the quality of the product
itself. Minor product variations may be implemented in order to comply with local requirements. Jotun reserves
the right to change the given data without further notice.

Users should always consult Jotun for specific guidance on the general suitability of this product for their needs
and specific application practices.

If there is any inconsistency between different language issues of this document, the English (United Kingdom)
version will prevail.

Date of issue: 16 November 2020 Page: 5/5

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
 Technical Data Sheet

Approved 1510 1,5 1510 ^(ValidationDate) 1

Jotafloor Non Slip Aggregate

Product description
This is graded silica aggregates, designed to be spread into a desired non-skid system. Available in coarse,
medium and fine particle sizes. Suitable as anti-skid material in a wide range of coating systems in atmospheric
environments. Suitable on any type of surface, depending on the specific coating system.

Particle Size:

Fine : 0.0 - 0.3 mm

Medium : 0.4 - 0.8 mm

Coarse : 0.6 - 1.4 mm

Typical use
Recommended for warehouses, garages, dairies, factories, laboratories, aircraft hangars, food, beverage and
plant rooms where non-slip properties are required. The spreading is to take place in the wet film during
application.
Other

Product data
Property Test/Standard Description
Solids by volume ISO 3233 100 %

The provided data is typical for factory produced products, subject to slight variation depending on colour.

Product mixing

Single pack

Additional information
If required Jotafloor Non Slip Aggregrate can be used with Jotafloor Topcoat, Jotafloor Coating and Jotafloor SL
Universal. (Advice should be sought from your local Jotun office regarding application techniques as these vary
slightly from product to product).

Jotafloor Non Slip Aggregate is cast on to the wet first coat of the Jotafloor material until the whole surface is
covered. Distribute the product from a container eg. distribution sieve, that will allow the aggregate to fall
directly onto the wet coating.

Once the first coat has dried, remove the excess aggregate from the surface by vacuum or sweeping. The
aggregate can be reused if clean.

Apply the final coat of Jotafloor material to the desired thickness.

Date of issue: 26 July 2017 Page: 1/3

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
Technical Data Sheet
Jotafloor Non Slip Aggregate

Packaging (typical)
Weight

Jotafloor Non Slip Aggregate 25 kg

The volume stated is for factory made colours. Note that local variants in pack size and filled volumes can vary
due to local regulations.

Storage
The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well
ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle
with care.

Shelf life at 23 °C
Jotafloor Non Slip Aggregate 48 month(s)

In some markets commercial shelf life can be dictated shorter by local legislation. The above is minimum shelf
life, thereafter the paint quality is subject to re-inspection.

Caution
This product is for professional use only. The applicators and operators shall be trained, experienced and have
the capability and equipment to mix/stir and apply the coatings correctly and according to Jotun's technical
documentation. Applicators and operators shall use appropriate personal protection equipment when using this
product. This guideline is given based on the current knowledge of the product. Any suggested deviation to suit
the site conditions shall be forwarded to the responsible Jotun representative for approval before commencing
the work.

Health and safety

Please observe the precautionary notices displayed on the container. Use under well ventilated conditions. Do
not inhale spray mist. Avoid skin contact. Spillage on the skin should immediately be removed with suitable
cleanser, soap and water. Eyes should be well flushed with water and medical attention sought immediately.

Colour variation
When applicable, products primarily meant for use as primers or antifoulings may have slight colour variations
from batch to batch. Such products may fade and chalk when exposed to sunlight and weathering.

Disclaimer

Date of issue: 26 July 2017 Page: 2/3

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
Technical Data Sheet
Jotafloor Non Slip Aggregate

The information in this document is given to the best of Jotun's knowledge, based on laboratory testing and
practical experience. Jotun's products are considered as semi-finished goods and as such, products are often
used under conditions beyond Jotun's control. Jotun cannot guarantee anything but the quality of the product
itself. Minor product variations may be implemented in order to comply with local requirements. Jotun reserves
the right to change the given data without further notice.

Users should always consult Jotun for specific guidance on the general suitability of this product for their needs
and specific application practices.

If there is any inconsistency between different language issues of this document, the English (United Kingdom)
version will prevail.

Date of issue: 26 July 2017 Page: 3/3

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
 Technical Data Sheet

Approved 29980;29981;30062 1,5 29980 epoxy ^(ValidationDate) 1

Jotafloor Topcoat E

Product description
This is a two component amine cured solvent free epoxy coating. It is a high performance product. It is easy to
apply. This product is tintable in a wide range of colours in Jotun's Multicolor Industry (MCI) system. It has
excellent chemical, abrasion and impact resistance. If enhanced slip resistance is required Jotafloor Non Slip can
be used in the system. To be used as topcoat in atmospheric environments. Suitable on approved primers on
concrete substrates.

Typical use
Designed for a wide range of floors with various levels of mechanical and chemical exposure. Specially designed
for floors where a dust free, hard wearing and aesthetically pleasing coating is required. Specially designed for
industrial floors, laboratories, hospitals, food and beverage plants, kitchens, high tech manufacturing facilities,
dairies, warehouses, factories and hangars.
Other

Approvals and certificates

This product contributes to the Green Buildings Standard credits. Please see section Green Building Standards.

Determination of Compressive Strength - ASTM C579:2012 & BS6319-2:1983.

Determination of Tensile Strength - ASTM C307 & BS 6319-7:1985.
Determination of Rapid Chloride Permeability – ASTM C 1202:2012.
Determination of Water Permeability – BS EN 12390-8:2009.
Determination of Resistance to growth of mold - ASTM D 3273-94.
Determination of Imapact Resistance -ASTM D2794.
Determination of Taber Abrasion (1000 cycles) - ASTM D4060.
Determination of Pull of Strength - ASTM D 4541/ASTM D 7234.
Determination of Chemical Resistance - ASTM D543.
Additional certificates and approvals may be available on request.

Colours
selected range of colours tinted over Multicolor Industry tinting system (MCI)

Product data
Property Test/Standard Description

Solids by volume ISO 3233 98 ± 2 %

Gloss level (GU 60 °) ISO 2813 gloss (70-85)
Flash point ISO 3679 Method 1 100 °C
VOC-EU EU VOC Directive 2004/42/CE (theoretical) 76 g/l

The provided data is typical for factory produced products, subject to slight variation depending on colour.
All data is valid for mixed paint.
Gloss description: According to Jotun Performance Coatings' definition.

Date of issue: 12 October 2021 Page: 1/6

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
Technical Data Sheet
Jotafloor Topcoat E

MCI tinted colours will contain some solvent.

Volume solids may vary depending upon the colour tinted in MCI.

Minor colour variation may occur with lighter colour shades.

Film thickness per coat

Typical recommended specification range

Dry film thickness 100 - 250 μm

Wet film thickness 100 - 255 μm
Theoretical spreading rate 9.8 - 3.92 m²/l

The actual spreading rate per coat may vary depending on the size of the Jotafloor Non Slip Aggregates used.
Spreading rate depends on film thickness applied, type of texture, surface porosity, imperfections, temperature,
wastage during painting etc.

Surface preparation
To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any
contamination.

Surface preparation summary table

Surface preparation

Substrate Minimum Recommended

Concrete and Coated Clean, dry and undamaged compatible Clean, dry and undamaged compatible
surfaces coating as per SSPC SP13/NACE NO 6 coating as per SSPC SP13/NACE NO 6
/ASTM D4258 -05 /ACI 503.6R- /ASTM D4258 -05 /ACI 503.6R-
97/SSPC-TR 5/ICRI TECHNICAL 97/SSPC-TR 5/ICRI TECHNICAL
GUIDELINE 03741/NACE02203 GUIDELINE 03741/NACE02203

Laitance deposits are best removed by Planetary diamond disc grinder or by captive blasting followed by vacuum
cleaning to remove dust debris. For old concrete, Jotun technical team should visit the site and appropriate
surface preparation methodology should be recommended and that is to be followed.

Application
Application methods
The product can be applied by

Spray: Use airless spray.

Brush: Recommended for stripe coating and small areas, care must be taken to achieve the
specified dry film thickness.
Roller: Use small fibre pile 2 roller.

Date of issue: 12 October 2021 Page: 2/6

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
Technical Data Sheet
Jotafloor Topcoat E

Conditions during application :

The temperature of the substrate should be minimum 10 °C and at least 3 °C above the dew point of the air,
measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure proper
drying. The moisture content in the substrate should not exceed 4 % (by weight). The coating should not be
exposed to oil, chemicals or mechanical stress until fully cured.

This product should not be applied on to the surfaces which are known to, or likely to suffer from, rising
dampness, potential osmosis problems or have a relative humidity greater than 80% as measured in accordance
with BS 8203 Appendix A.

For vertical concrete or application on other substrates, please contact your Jotun sales representative

Product mixing ratio (by volume)

Jotafloor Topcoat E Comp A 4 part(s)

Jotafloor Topcoat E Comp B (20) 1 part(s)

Jotafloor Topcoat E Comp A 4 part(s)

Jotafloor Topcoat E Comp B (40) 1 part(s)

NO PART MIXING.
Use a slow speed drill and mixing paddle.

The temperature of base and curing agent is recommended to be 18 °C or higher when the paint is mixed.

Part mixing of these components is not acceptable and will affect both performance and appearance of the
finished floor.

Mixing should be carried out using a heavy duty, slow-speed drill with appropriate mixing paddle attachment.
The individual components should be thoroughly stirred to disperse any settlement, then the Comp A and Comp
B packs should be mixed together. The entire contents of the hardener (B) container should be added to the
base (A) and mixed together for two minutes until a homogeneous mix is obtained. When a homogenous state
has been achieved split the mixed paint in to two separate containers and continue mixing both portions of the
mix for a further 2 minutes.

Thinner/Cleaning solvent
Cleaning solvent : Jotun Thinner No. 17

Thinning of the product is not recommended.

Guiding data for airless spray

Nozzle tip (inch/1000): 21 - 25
Pressure at nozzle (minimum): 150 bar/2100 psi

Date of issue: 12 October 2021 Page: 3/6

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
Technical Data Sheet
Jotafloor Topcoat E

Drying and Curing time

Substrate temperature 10 °C 23 °C 40 °C

Jotafloor Topcoat E Comp B (20)

Surface (touch) dry 36 h

Walk-on-dry 4d
Dry to over coat, minimum 4d
Dry to over coat, maximum, atmospheric 7d
Dried/cured for service 10 d

Jotafloor Topcoat E Comp B (40)

Surface (touch) dry 12 h 4h

Walk-on-dry 24 h 8h
Dry to over coat, minimum 24 h 8h
Dry to over coat, maximum, atmospheric 3d 36 h
Dried/cured for service 7d 3d

Drying and curing times are determined under controlled temperatures and relative humidity below 85 %, and
at average of the DFT range for the product.

Surface (touch) dry: The state of drying when slight pressure with a finger does not leave an imprint or reveal
tackiness.

Walk-on-dry: Minimum time before the coating can tolerate normal foot traffic without permanent marks,
imprints or other physical damage.

Dry to over coat, minimum: The recommended shortest time before the next coat can be applied.

Dry to over coat, maximum, atmospheric: The longest time allowed before the next coat can be applied.

Dried/cured for service: Minimum time before the coating can be permanently exposed to the intended
environment/medium.

Induction time and Pot life

Paint temperature 10 °C 23 °C

Jotafloor Topcoat E Comp B (20)

Induction time 3 min

Recommended.

Pot life 20 min

Jotafloor Topcoat E Comp B (40)

Induction time 3 min

Recommended.

Pot life 30 min.

Date of issue: 12 October 2021 Page: 4/6

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
Technical Data Sheet
Jotafloor Topcoat E

Product compatibility

Previous coat: Jotafloor Sealer or Jotafloor SF PR 150 or Jotafloor Solvent Free Primer

Packaging (typical)
Volume Size of containers
(litres) (litres)

Jotafloor Topcoat E Comp A 4/8 5/10

Jotafloor Topcoat E Comp B (20) 1/2 1/2
Jotafloor Topcoat E Comp B (40) 1/2 1/2

The volume stated is for factory made colours. Note that local variants in pack size and filled volumes can vary
due to local regulations.

Storage
The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well
ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle
with care.

Shelf life at 23 °C
Jotafloor Topcoat E Comp A 24 month(s)
Jotafloor Topcoat E Comp B (20) 24 month(s)
Jotafloor Topcoat E Comp B (40) 24 month(s)

In some markets commercial shelf life can be dictated shorter by local legislation. The above is minimum shelf
life, thereafter the paint quality is subject to re-inspection.

Green Building Standards

This product contributes to Green Building Standard credits by meeting the following specific requirements:

LEED®v4 (2013) / LEED®v4 .1 (2019):

EQ credit: Low emitting materials
- VOC content for floor coatings (100 g/l) (CARB(CSM)2007) and emission between 0.5 and 5.0 mg/m³ (CDPH
method 1.2)
MR credit: Building product disclosure and optimization
- Material Ingredients, Option 2: Material Ingredient Optimization, International Alternative Compliance Path -
REACH optimization: Fully inventoried chemical ingredients to 100 ppm and not containing substances on the
REACH Authorization list – Annex XIV, the Restriction list – Annex XVII and the SVHC candidate list.
- Environmental Product Declarations. Product-specific Type III EPD (ISO 14025;21930, EN 15804).

BREEAM® International (2016)

Mat 01: Product-specific Type III EPD (ISO 14025;21930, EN 15804).

BREEAM® International (2013)

Hea 02: VOC content for Two-pack performance Coatings SB (500 g/l) (EU Directive 2004/42/CE).

Additional certificates and approvals may be available on request.

Date of issue: 12 October 2021 Page: 5/6

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
Technical Data Sheet
Jotafloor Topcoat E

Caution
This product is for professional use only. The applicators and operators shall be trained, experienced and have
the capability and equipment to mix/stir and apply the coatings correctly and according to Jotun's technical
documentation. Applicators and operators shall use appropriate personal protection equipment when using this
product. This guideline is given based on the current knowledge of the product. Any suggested deviation to suit
the site conditions shall be forwarded to the responsible Jotun representative for approval before commencing
the work.

Health and safety

Please observe the precautionary notices displayed on the container. Use under well ventilated conditions. Do
not inhale spray mist. Avoid skin contact. Spillage on the skin should immediately be removed with suitable
cleanser, soap and water. Eyes should be well flushed with water and medical attention sought immediately.

Colour variation
When applicable, products primarily meant for use as primers or antifoulings may have slight colour variations
from batch to batch. Such products and epoxy based products used as a finish coat may chalk when exposed to
sunlight and weathering.

Colour and gloss retention on topcoats/finish coats may vary depending on type of colour, exposure
environment such as temperature, UV intensity etc., application quality and generic type of paint. Contact your
local Jotun office for further information.

Disclaimer
The information in this document is given to the best of Jotun's knowledge, based on laboratory testing and
practical experience. Jotun's products are considered as semi-finished goods and as such, products are often
used under conditions beyond Jotun's control. Jotun cannot guarantee anything but the quality of the product
itself. Minor product variations may be implemented in order to comply with local requirements. Jotun reserves
the right to change the given data without further notice.

Users should always consult Jotun for specific guidance on the general suitability of this product for their needs
and specific application practices.

If there is any inconsistency between different language issues of this document, the English (United Kingdom)
version will prevail.

Date of issue: 12 October 2021 Page: 6/6

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
 Technical Data Sheet

Approved 487;488 1,5 487 polyurethane ^(ValidationDate) 1

Jotafloor PU Topcoat

Product description
This is a two component isocyanate cured polyurethane coating. It is a high performance, non yellowing product.
It is easy to apply. This product is tintable in a wide range of colours in Jotun's Multicolor Industry (MCI) system.
It has excellent gloss and colour retention. It has good chemical, abrasion and impact resistance. If enhanced
slip resistance is required Jotafloor Non Slip can be used in the system. To be used as topcoat in atmospheric
environments. Suitable on approved primers on concrete substrates.

Typical use
Designed for a wide range of floors with various levels of mechanical and chemical exposure. Specially designed
for areas exposed to direct sunlight where gloss and colour stability is desired. Recommended as a topcoat as
part of the car parks, parking bays, pedestrian walkways, industrial floors, drive ways, ramps and traffic deck
systems.
Other

Approvals and certificates

This product contributes to the Green Buildings Standard credits. Please see section Green Building Standards.

Determination of Elongation - ASTM D2730

Determination of ease of decontamination - BS4247 Part 1:1987
Additional certificates and approvals may be available on request.

Colours
according to colour card and Multicolor Industry tinting system (MCI)

Product data
Property Test/Standard Description

Solids by volume ISO 3233 63 ± 2 %

Gloss level (GU 60 °) ISO 2813 gloss (70-85)
Flash point ISO 3679 Method 1 34 °C
Density calculated 1.3 kg/l
VOC-US/Hong Kong US EPA method 24 (tested) 345 g/l
(CARB(SCM)2007, SCAQMD rule 1113, Hong Kong)
VOC-EU EU VOC Directive 2004/42/CE (theoretical) 367 g/l

The provided data is typical for factory produced products, subject to slight variation depending on colour.
All data is valid for mixed paint.
Gloss description: According to Jotun Performance Coatings' definition.

Date of issue: 30 August 2020 Page: 1/6

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
Technical Data Sheet
Jotafloor PU Topcoat

Film thickness per coat

Typical recommended specification range

Dry film thickness 50 - 80 μm

Wet film thickness 80 - 130 μm
Theoretical spreading rate 12.6 - 7.9 m²/l

Spreading rate depends on film thickness applied, type of texture, surface porosity, imperfections, temperature,
wastage during painting etc.
The actual spreading rate per coat may vary depending on the size of the Jotafloor Non Slip Aggregates used.
Coverage on Non slip aggregate would reduce considerably.

Surface preparation
To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any
contamination.

Surface preparation summary table

Surface preparation

Substrate Minimum Recommended

Coated surfaces and Clean, dry and undamaged compatible Clean, dry and undamaged compatible
Concrete coating as per SSPC SP13/NACE NO 6 coating as per SSPC SP13/NACE NO 6
/ASTM D4258 -05 /ACI 503.6R- /ASTM D4258 -05 /ACI 503.6R-
97/SSPC-TR 5/ICRI TECHNICAL 97/SSPC-TR 5/ICRI TECHNICAL
GUIDELINE 03741/NACE02203 GUIDELINE 03741/NACE02203

Laitance deposits are best removed by Planetary diamond disc grinder or by captive blasting followed by vacuum
cleaning to remove dust debris. For old concrete, Jotun technical team should visit the site and appropriate
surface preparation methodology should be recommended and that is to be followed.
Substrate should be atleast 28 days old and have moisture content not exceeding 5% and leave a clean, sound
and stable base.The preffered method of abrading the substrate is dust free captive blasting or diamond
grinding.
To fill any blow holesor undulations in the substrate Jotafloor Filler or Jotafloor Filler Plus may be used.

Application
Application methods
The product can be applied by

Spray: Use airless spray or conventional spray.

Brush: Recommended for stripe coating and small areas. Care must be taken to achieve the
specified dry film thickness.
Roller: May be used. Care must be taken to achieve the specified dry film thickness.

Date of issue: 30 August 2020 Page: 2/6

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
Technical Data Sheet
Jotafloor PU Topcoat

Conditions during application :

The temperature of the substrate should be minimum 10 °C and at least 3 °C above the dew point of the air,
measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure proper
drying. The moisture content in the substrate should not exceed 4 % (by weight). The coating should not be
exposed to oil, chemicals or mechanical stress until fully cured.
This product should not be applied on to the surfaces which are known to, or likely to suffer from, rising
dampness, potential osmosis problems or have a relative humidity greater than 80% as measured in accordance
with BS 8203 Appendix A.

Product mixing ratio (by volume)

Jotafloor PU Topcoat Comp A 5 part(s)

Jotafloor PU Topcoat Comp B 1 part(s)

NO PART MIXING.
Use a slow speed drill and mixing paddle.

The temperature of base and curing agent is recommended to be 18 °C or higher when the product is mixed.

Part mixing of these components is not acceptable and will affect both performance and appearance of the
finished floor.

Mixing should be carried out using a heavy duty, slow-speed drill with appropriate mixing paddle attachment.
The individual components should be thoroughly stirred to disperse any settlement, then the Comp A and Comp
B packs should be mixed together. The entire contents of the hardener (B) container should be added to the
base (A) and mixed together for two minutes until a homogeneous mix is obtained. When a homogenous state
has been achieved split the mixed paint in to two separate containers and continue mixing both portions of the
mix for a further 2 minutes.

Thinner/Cleaning solvent
Cleaning solvent : Jotun Thinner No. 10

No dilution is required.

Guiding data for airless spray

Nozzle tip (inch/1000): 13 - 17
Pressure at nozzle (minimum): 150 bar/2100 psi

Drying and Curing time

Substrate temperature 10 °C 23 °C 40 °C

Surface (touch) dry 24 h 10 h 4h

Walk-on-dry 30 h 18 h 10 h
Dry to over coat, minimum 36 h 24 h 16 h
Dry to over coat, maximum, atmospheric 3d 3d 48 h
Dried/cured for service 7d 7d 3d

Surface (touch) dry: The state of drying when slight pressure with a finger does not leave an imprint or reveal
tackiness.

Date of issue: 30 August 2020 Page: 3/6

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
Technical Data Sheet
Jotafloor PU Topcoat

Walk-on-dry: Minimum time before the coating can tolerate normal foot traffic without permanent marks,
imprints or other physical damage.

Dry to over coat, minimum: The recommended shortest time before the next coat can be applied.

Dry to over coat, maximum, atmospheric: The longest time allowed before the next coat can be applied.

Dried/cured for service: Minimum time before the coating can be permanently exposed to the intended
environment/medium.

Induction time and Pot life

Paint temperature 23 °C

Induction time 3 min

Recommended.

Pot life 1h

Product compatibility

Previous coat: Jotafloor Sealer or Jotafloor SF PR 150 or Jotafloor Solvent Free Primer

Packaging (typical)
Volume Size of containers
(litres) (litres)

Jotafloor PU Topcoat Comp A 3.75/15 5/20

Jotafloor PU Topcoat Comp B 0.75/3 1/5

The volume stated is for factory made colours. Note that local variants in pack size and filled volumes can vary
due to local regulations.

Storage
The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well
ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle
with care.

Shelf life at 23 °C
Jotafloor PU Topcoat Comp A 24 month(s)
Jotafloor PU Topcoat Comp B 24 month(s)

In some markets commercial shelf life can be dictated shorter by local legislation. The above is minimum shelf
life, thereafter the paint quality is subject to re-inspection.

Green Building Standards

Date of issue: 30 August 2020 Page: 4/6

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
Technical Data Sheet
Jotafloor PU Topcoat

This product contributes to Green Building Standard credits by meeting the following specific requirements:

LEED®v4 (2013)
MR credit: Building product disclosure and optimization
- Material Ingredients, Option 2: Material Ingredient Optimization, International Alternative Compliance Path -
REACH optimization: Fully inventoried chemical ingredients to 100 ppm and not containing substances on the
REACH Authorization list – Annex XIV, the Restriction list – Annex XVII and the SVHC candidate list.
- Environmental Product Declarations. Product-specific Type III EPD (ISO 14025;21930, EN 15804).

SS Credit: Heat Island Reduction

Selected colour(s) of this product meets the requirements of:
SRI of at least 39 for steep-sloped roof
SRI of at least 39 for parking roof covering

BREEAM® International (2016)

- Mat 01: Product-specific Type III EPD (ISO 14025;21930, EN 15804).

BREEAM® International (2013)

- Hea 02: VOC content for Two-pack performance Coatings SB (500 g/l) (EU Directive 2004/42/CE).

Additional certificates and approvals may be available on request.

Caution
This product is for professional use only. The applicators and operators shall be trained, experienced and have
the capability and equipment to mix/stir and apply the coatings correctly and according to Jotun's technical
documentation. Applicators and operators shall use appropriate personal protection equipment when using this
product. This guideline is given based on the current knowledge of the product. Any suggested deviation to suit
the site conditions shall be forwarded to the responsible Jotun representative for approval before commencing
the work.

Health and safety

Please observe the precautionary notices displayed on the container. Use under well ventilated conditions. Do
not inhale spray mist. Avoid skin contact. Spillage on the skin should immediately be removed with suitable
cleanser, soap and water. Eyes should be well flushed with water and medical attention sought immediately.

Colour variation
When applicable, products primarily meant for use as primers or antifoulings may have slight colour variations
from batch to batch. Such products may fade and chalk when exposed to sunlight and weathering.

Colour and gloss retention on topcoats/finish coats may vary depending on type of colour, exposure
environment such as temperature, UV intensity etc., and application quality. Contact your local Jotun office for
further information.

Disclaimer
The information in this document is given to the best of Jotun's knowledge, based on laboratory testing and
practical experience. Jotun's products are considered as semi-finished goods and as such, products are often
used under conditions beyond Jotun's control. Jotun cannot guarantee anything but the quality of the product
itself. Minor product variations may be implemented in order to comply with local requirements. Jotun reserves
the right to change the given data without further notice.

Users should always consult Jotun for specific guidance on the general suitability of this product for their needs
and specific application practices.

If there is any inconsistency between different language issues of this document, the English (United Kingdom)

Date of issue: 30 August 2020 Page: 5/6

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
Technical Data Sheet
Jotafloor PU Topcoat

version will prevail.

Date of issue: 30 August 2020 Page: 6/6

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
 Technical Data Sheet

Approved 52162;52163 1,5 52162 polyurethane ^(ValidationDate) 2

Jotafloor Lines

Product description
This is a two component chemically curing aliphatic polyurethane coating designed for line and traffic marking. It
has a glossy finish with very good gloss retention. The product has excellent impact, abrasion and chemical
resistance. To be used as a a top coat in atmospheric environments including internal and external surfaces.

Typical use
Recommended for line marking for parking bays, drive ways, kerb stones and zones.
Other

Approvals and certificates

Chemical resistance
Pull off strength
Water resistance
Impact resistance
Abrasion resistance
UV resistance
Additional certificates and approvals may be available on request.

Colours
according to colour card and Multicolor Industry tinting system (MCI)

Product data
Property Test/Standard Description

Solids by volume ISO 3233 63 ± 2 %

Gloss level (GU 60 °) ISO 2813 gloss (70-85)
Flash point ISO 3679 Method 1 30 °C
Density calculated 1.4 kg/l
VOC-US/Hong Kong US EPA method 24 (tested) 323 g/l
(CARB(SCM)2007, SCAQMD rule 1113, Hong Kong)
VOC-EU IED (2010/75/EU) (theoretical) 326 g/l
VOC-China GB/T 23985-2009 (tested) 330 g/l
VOC-Korea Korea Clean Air Conservation Act (tested) 385 g/l
(Max. thinning ratio included)

The provided data is typical for factory produced products, subject to slight variation depending on colour.
All data is valid for mixed paint.
Gloss description: According to Jotun Performance Coatings' definition.

The VOC values refer to white colour.

Date of issue: 15 August 2022 Page: 1/5

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
Technical Data Sheet
Jotafloor Lines

Film thickness per coat

Typical recommended specification range

Dry film thickness 50 - 100 μm

Wet film thickness 80 - 160 μm
Theoretical spreading rate 12.6 - 6.3 m²/l

Bright colours may need film thickness in the high end of the recommended specification range to achieve
opacity.

Special effect colours may have diverging specification range. Refer to the Application Guide (AG) for additional
information or contact your nearest Jotun office.

Surface preparation
To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any
contamination.

Surface preparation summary table

Surface preparation

Substrate Minimum Recommended

Coated surfaces and Clean, dry and undamaged compatible Clean, dry and undamaged compatible
Concrete coating as per SSPC SP13/NACE NO 6 coating as per SSPC SP13/NACE NO 6
/ASTM D4258 -05 /ACI 503.6R- /ASTM D4258 -05 /ACI 503.6R-
97/SSPC-TR 5/ICRI TECHNICAL 97/SSPC-TR 5/ICRI TECHNICAL
GUIDELINE 03741/NACE02203 GUIDELINE 03741/NACE02203

Laitance deposits are best removed by Planetary diamond disc grinder or by captive blasting followed by vacuum
cleaning to remove dust debris. For old concrete, Jotun technical team should visit the site and appropriate
surface preparation methodology should be recommended and that is to be followed. Substrate should be
atleast 28 days old and have moisture content not exceeding 5% and leave a clean, sound and stable base.The
preffered method of abrading the substrate is dust free captive blasting or diamond grinding.
To fill any blow holesor undulations in the substrate Jotafloor Filler or Jotafloor Filler Plus may be used.

Application
Application methods
The product can be applied by

Spray: Use air spray or airless spray.

Brush: Recommended for stripe coating and small areas. Care must be taken to achieve the
specified dry film thickness.
Roller: May be used. Care must be taken to achieve the specified dry film thickness.

Date of issue: 15 August 2022 Page: 2/5

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
Technical Data Sheet
Jotafloor Lines

Product mixing ratio (by volume)

Jotafloor Lines Comp A 10 part(s)

Jotafloor Lines Comp B 1 part(s)

NO PART MIXING.
Use a slow speed drill and mixing paddle. The temperature of base and curing agent is recommended to be 18
°C or higher when the product is mixed. Part mixing of these components is not acceptable and will affect both
performance and appearance of the finished floor. Mixing should be carried out using a heavy duty, slow-speed
drill with appropriate mixing paddle attachment. The individual components should be thoroughly stirred to
disperse any settlement, then the Comp A and Comp B packs should be mixed together. The entire contents of
the hardener (B) container should be added to the base (A) and mixed together for two minutes until a
homogeneous mix is obtained. When a homogenous state has been achieved split the mixed paint in to two
separate containers and continue mixing both portions of the mix for a further 2 minutes.

Thinner/Cleaning solvent
Thinner: Jotun Thinner No. 10

Drying and Curing time

Substrate temperature 5 °C 10 °C 23 °C 40 °C

Surface (touch) dry 16 h 6h 3.5 h 2 h

Walk-on-dry 24 h 14 h 7h 4 h
Dry to over coat, minimum 24 h 14 h 7h 4 h
Dried/cured for service 21 d 14 d 7d 3 d

Drying and curing times are determined under controlled temperatures and relative humidity below 85 %, and
at average of the DFT range for the product.

Surface (touch) dry: The state of drying when slight pressure with a finger does not leave an imprint or reveal
tackiness.

Walk-on-dry: Minimum time before the coating can tolerate normal foot traffic without permanent marks,
imprints or other physical damage.

Dry to over coat, minimum: The recommended shortest time before the next coat can be applied.

Dried/cured for service: Minimum time before the coating can be permanently exposed to the intended
environment/medium.

Induction time and Pot life

Paint temperature 23 °C

Pot life 1.5 h

Date of issue: 15 August 2022 Page: 3/5

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
Technical Data Sheet
Jotafloor Lines

Heat resistance
Temperature
Continuous Peak

Dry, atmospheric 120 °C 140 °C

Peak temperature duration max. 1 hour.

The temperatures listed relate to retention of protective properties. Aesthetic properties may suffer at these
temperatures.

Product compatibility
Depending on the actual exposure of the coating system, various primers and topcoats can be used in
combination with this product. Some examples are shown below. Contact Jotun for specific system
recommendation.

Previous coat: Epoxy Primer, epoxy and polyurethane coating.

Packaging (typical)
Volume Size of containers
(litres) (litres)

Jotafloor Lines Comp A 4.55 / 18.2 5 / 20

Jotafloor Lines Comp B 0.45 / 1.8 1/3

The volume stated is for factory made colours. Note that local variants in pack size and filled volumes can vary
due to local regulations.

Storage
The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well
ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle
with care.

Shelf life at 23 °C
Jotafloor Lines Comp A 48 month(s)
Jotafloor Lines Comp B 48 month(s)

In some markets commercial shelf life can be dictated shorter by local legislation. The above is minimum shelf
life, thereafter the paint quality is subject to re-inspection.

Date of issue: 15 August 2022 Page: 4/5

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
Technical Data Sheet
Jotafloor Lines

Caution
This product is for professional use only. The applicators and operators shall be trained, experienced and have
the capability and equipment to mix/stir and apply the coatings correctly and according to Jotun's technical
documentation. Applicators and operators shall use appropriate personal protection equipment when using this
product. This guideline is given based on the current knowledge of the product. Any suggested deviation to suit
the site conditions shall be forwarded to the responsible Jotun representative for approval before commencing
the work.

Health and safety

Please observe the precautionary notices displayed on the container. Use under well ventilated conditions. Do
not inhale spray mist. Avoid skin contact. Spillage on the skin should immediately be removed with suitable
cleanser, soap and water. Eyes should be well flushed with water and medical attention sought immediately.

Colour variation
When applicable, products primarily meant for use as primers or antifoulings may have slight colour variations
from batch to batch. Such products and epoxy based products used as a finish coat may chalk when exposed to
sunlight and weathering.

Colour and gloss retention on topcoats/finish coats may vary depending on type of colour, exposure
environment such as temperature, UV intensity etc., application quality and generic type of paint. Contact your
local Jotun office for further information.

Disclaimer
The information in this document is given to the best of Jotun's knowledge, based on laboratory testing and
practical experience. Jotun's products are considered as semi-finished goods and as such, products are often
used under conditions beyond Jotun's control. Jotun cannot guarantee anything but the quality of the product
itself. Minor product variations may be implemented in order to comply with local requirements. Jotun reserves
the right to change the given data without further notice.

Users should always consult Jotun for specific guidance on the general suitability of this product for their needs
and specific application practices.

If there is any inconsistency between different language issues of this document, the English (United Kingdom)
version will prevail.

Date of issue: 15 August 2022 Page: 5/5

This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com
 TEST REPORT
REACTION TO FIRE TEST
TEST SPONSOR:
Jotun UAE Ltd. LLC
P.O. Box: 3671, Al Quoz Industrial Area
Dubai, United Arab Emirates
T: +971 4 339 5000, F: +971 4 338 0666
Website: www.jotun.com

TESTED MATERIAL/ASSEMBLY:
Jotafloor PU Coating System applied over fibre cement board substrate

TEST STANDARD:
ASTM E84-16: Standard Test Method for Surface Burning Characteristics of Building
Materials

Test Date: 22-Mar-17

Issue Date: 5-Apr-17
Test Reference No.: QL022-3

PO BOX 26385, DUBAI UAE T +971 (0)4 821 5777 [email protected] www.bell-wright.com

DUBAI ABU DHABI DOHA

Copyright© This document shall not be reproduced except in full without written approval of Thomas Bell-Wright International Consultants
 Test Reference No.: QL022-3

Accreditation
ISO/IEC 17025: General requirements for the competence of testing and calibration
laboratories with:

United Kingdom Accreditation Service (UKAS) - Testing Laboratory: 4439

www.ukas.com

GCC Accreditation Center (GAC) – Testing Laboratory: ATL-0017

www.GCC-accreditation.org

Memberships
Members of European Group of Organization for Fire Testing, Inspection and Certification
www.egolf.org.uk
Member of International Trade Council
www.thetradecouncil.com
Member of Association for Specialist Fire Protection
www.asfp.org.uk
Member of Centre for Window and Cladding Technology
www.cwct.co.uk

The work which is the subject of this report falls wholly or partly under the accreditations of ISO 17025
UKAS and ISO 17025 GAC.

Page 2 of 11
 Test Reference No.: QL022-3

Table of Contents

1. INTRODUCTION ....................................................................................................................................... 4
2. SPONSOR ................................................................................................................................................. 4
3. TESTING LABORATORY ............................................................................................................................ 4
4. DATE OF TEST .......................................................................................................................................... 4
5. SPECIMEN DESCRIPTION ......................................................................................................................... 5
6. METHOD OF TEST.................................................................................................................................... 6
6.1. Placing of test specimen ................................................................................................................. 6
6.2. Test Method .................................................................................................................................... 6
6.3. Conditioning .................................................................................................................................... 6
7. OBSERVATION ......................................................................................................................................... 7
8. SUMMARY OF RESULTS........................................................................................................................... 7
9. CLASSIFICATIONS .................................................................................................................................... 8
10. LIMITATIONS ....................................................................................................................................... 9
11. APPENDIX 1- GRAPHS........................................................................................................................ 10
12. APPENDIX 2- PICTURES ..................................................................................................................... 11

Page 3 of 11
 Test Reference No.: QL022-3

1. INTRODUCTION
Determination of the flame spread index and the smoke developed index of Jotafloor PU Coating System
applied over fibre cement board substrate as per ASTM E84; Standard Test Method for Surface Burning
Characteristics of Building Materials.

2. SPONSOR
Name: Jotun UAE Ltd. LLC
Address: P.O. Box: 3671, Al Quoz Industrial Area
Dubai, United Arab Emirates
T: +971 4 339 5000
F: +971 4 338 0666
Website: www.jotun.com

3. TESTING LABORATORY
Name: Thomas Bell-Wright International Consultants (TBWIC)
Address: Corner of 46th and 47th Streets,
Jebel Ali Industrial Area 1
Dubai, United Arab Emirates
T: +971 4 821 5777
F: +971 4 333 2693
Website: www.bell-wright.com

4. DATE OF TEST
Sample received: 27-Feb-17
Test date: 22-Mar-17

The test has not been witnessed by the Sponsor.

Page 4 of 11
 Test Reference No.: QL022-3

5. SPECIMEN DESCRIPTION
The description of the specimen given below has been prepared from information provided by the Sponsor.

Product Tested Coating System applied over fibre cement board substrate
Product Name Jotafloor PU Coating System
Manufacturer Jotun UAE Ltd. LLC
Overall Coating Thickness 240 microns
Fire side Exposed coated surface
Product Description
Product Name PU Coating
Product Reference Jotafloor PU Top Coat HS
Manufacturer Jotun Paints
Top Coat (fire side)

Colour Reference Note 1

Number of Coats 2 Coats x 70 microns
Application rate per coat 13 m2/litre
Application method Roller Application
Curing process per coat 7 days curing
Thickness 140 microns
Specific gravity 1.39
Product Name Epoxy
Product Reference Jotafloor SF Primer
Manufacturer Jotun Paints
Product Details Colour Reference Note 1
Primer

Number of Coats 1 x 100 Microns

Application rate per coat 10 m2/litre
Application method Roller Application
Curing process per coat 1 day curing
Thickness 100 microns
Specific gravity 1.1
Product Name Fibre Cement Board
Manufacturer Outsourced
Colour Reference Grey
Substrate

Thickness 12mm
Density Note 1
Dimensions per panel 2440 x 605mm (l x w) (measured)
No. of panel 3
Total dimension 7320 x 605mm (l x w) (measured)
Three (3) sections of Jotafloor PU Coating System applied over fibre
Specimen placement cement board substrate were butt jointed end-to-end. The test
specimen was placed directly to the tunnel ledges with the exposed
coated surface towards the flame source.
Note 1 – The Sponsor cannot provide the information.

Page 5 of 11
 Test Reference No.: QL022-3

The test specimen was submitted by the client and TBWIC has not been involved in the selection and
configuration of the specimen.

6. METHOD OF TEST
6.1. Placing of test specimen
The test specimen consisted of three (3) sections of Jotafloor PU Coating System applied over fibre
cement board substrate. The dimension per panel was 2440 x 605mm (l x w) and was butt jointed end-
to-end. The total dimensions of the specimen were 7320 x 605mm (l x w).
Several sections of cement board butt jointed end-to-end with overall dimensions of 7350 x 600mm (l
x w), were placed at the back of the sample to protect the furnace lid assembly.

6.2. Test Method

The specimen was installed horizontally in the Steiner Tunnel and supported by the ledges. The exposed
coated surface of the specimen (fire side) was exposed to a flaming exposure during the 10 minute test
duration.
Flame spread and density of the smoke are measured and recorded while the results are computed
against the standard calibration materials (cement board and red oak flooring).

6.3. Conditioning
After delivery on 27-Feb-17, the specimen was stored in room temperature for 23 days prior to the test
ranging from 20.2 to 25.8°C and 45 to 55% relative humidity.

Page 6 of 11
 Test Reference No.: QL022-3

7. OBSERVATION
Test Data and Observation
Observations
Ignition Time (min:sec) 01:16
Time to maximum flame front advance (min:sec) 09:40
Maximum flame spread (ft) 2.0
Time to end of tunnel reached (min:sec) Not Reached
Maximum temp recorded at the exposed thermocouple located near
566/297
the end of the tunnel (ᵒF / ᵒC)
Dripping (min:sec) None
Flaming on the floor (min:sec) 07:08
After flame on the top (min:sec) None
After flame on the floor (min:sec) None
Delamination (min:sec) 1:53
Sagging (min:sec) None
Shrinkage (min:sec) None
Fallout (min:sec) None

FS*Time Area (ft*min) 11.92

Smoke Area (%A*min) 25.40

Red Oak Smoke Area (%A*min) 89.2

8. SUMMARY OF RESULTS
The test specimen has been evaluated in accordance with ASTM E84; Standard Test Method for Surface
Burning Characteristics of Building Materials.

The test results are:

FLAME SPREAD INDEX (FSI) 5

SMOKE DEVELOPED INDEX (SDI) 30

Results are valid for the tested configuration only.

Page 7 of 11
 Test Reference No.: QL022-3

9. CLASSIFICATIONS
The following information is designed to help put these test results into context. Flame Spread Index and
Smoke Developed Index results from an ASTM E84 test are often used by regulatory agencies to approve
materials for various applications. For example, the International Building Code 2015, Section 803.1.1
requires that:

Interior wall and ceiling finish materials shall be classified in accordance with ASTM E84 or UL 723-10th Ed.
2008. Such interior finish materials shall be grouped in the following classes in accordance with their flame
spread and smoke-developed indexes.

Class A: Flame spread index 0 - 25; smoke-developed index 0 - 450.

Class B: Flame spread index 26 - 75; smoke-developed index 0 - 450.
Class C: Flame spread index 76 - 200; smoke-developed index 0 - 450.

Note that the above example is the IBC requirement for interior wall and ceiling finishes only; your
application may be different.

Page 8 of 11
 Test Reference No.: QL022-3

11. APPENDIX 1- GRAPHS

20
18
16
Flame Spread (feet)

14
12
10
8
6
4
2
0
0 1 2 3 4 5 6 7 8 9 10
Time (min)

Red Oak Calibration Test Specimen

Graph 1: Flame Spread Index (FSI)

100
90
80
% Light Absorption

70
60
50
40
30
20
10
0
0 1 2 3 4 5 6 7 8 9 10
Time (min)
Red Oak Calibration Test Specimen

Graph 2: Smoke Developed Index (SDI)

Page 10 of 11
 Test Reference No.: QL022-3

12. APPENDIX 2- PICTURES

Photo 1: Specimen before the test Photo 2: Specimen before the test
(Non-fire side) (Fire side)

Photo 3: Specimen after the test Photo 4: Specimen after the test
(located near the fire end) (located near the exhaust end)

- End of test report -

Page 11 of 11
 COLOU R A DDS
FU N C T I O N A L I T Y
G RE Y H A S A WAY OF Cover
Color can add more than aesthetic value
SU I T I N G A N Y ST YL E
Shades of grey are consistently our
to your project. In spaces such as car parks
and airports, choosing different colours for PU CRETE
most popular Jotafloor colours. They different levels can help visitors navigate COLOURS THAT INSPIRE
complement architecture, are flexible to with ease.
suits diverse design styles, and hide subtle
tire marks better than other colours.

U N DE R YOU R FEE T
BU T TO P OF M I N D
Flooring is the most used area in any
business. Whether in a factory, kitchen,
warehouse or car park, the floor takes the
greatest abuse. Our flooring solutions give
you the chance to make your floors durable
and beautiful.

STAY IN TOUCH
At Jotun, we don’t just sell a high-quality
product; we back it up with the highest quality
customer service. We are your partner in
achieving your project’s goals. With industry-
leading technical support and a track record of
global market experience, our aim is to not only
meet, but exceed your needs.

Please contact your local Jotun representative to

learn more about how our products can play an
important role in your projects.

JOTUNPROFESSIONALS.COM
QUA L I T Y FLOO R I N G OU R M OST F I N D YOU R PE RFEC T EL E VAT E YOU R DES I G N
IS T HE F OU N DAT I O N P O PUL A R SH A DES SH A DE OF G RE Y W I T H BOL D COLOU R S
OF A SOL I D BUS I N ESS
Jotafloor products are renowned for their strength,
durability and reliability in the toughest floor
coating applications. With our range of colours
options, you can bring your design vision to life,
9 9 14 RAL 7047 520 960 RAL 7038 4069 962 RAL 7001 599
providing beauty and additional utility.

967 RAL 7035

5090 117 4 0 21 RAL 7004 5 0 47 4044 RAL 5017 368

7 214 19 8 RAL 7042 9 9 12 908 RAL 1013 993 708

997 RAL 7040

8025 RAL 7044 9 61 RAL 7037 969 RAL 7012 414 15 8 8 2230

038

4056 6078 RAL 7043 964 RAL 7015 956 RAL 6019 958 RAL 6021 593

L I N E M A RK I N G

7 0 75 RAL 6032 992 RAL 6010 257

99

0 71

10 8 5 RAL 1023

0 01

925 RAL 3020

Due to the differences in production methods, pigments and gloss levels, deviations can occur
between the samples and delivered products. For critical colour matches, please prepare an
115 950 RAL 6024 on-site sample application before proceeding with the entire job.
 05020-250 SOPC-COKER COMPLEX REHABILITATION

DOCUMENT NAME

REQUEST MATERIAL APPROVAL (RMA)

DOCUMENT NUMBER

05020-250-000-CV-MA-099

Project: Coker Complex

Stamp for SOPC review
Rehabilitation

Location: Suez EGYPT Client: SOPC

STATUS OF DOCUMENT
A -Approved without comments D -Information

B -Approved with comments Z -Cancelled

C -Not Approved E -As-Built

DATE 7/11/2022
NAME Mohamed Kamel
SIGNATURE M.Kamel
material approved and will be used for all buildings in coker project as per finishing
schedule.

A.Eihab 06-Nov, 22
TRANSMISSION OF ( MATERIAL ) Trans.no.. Date 15/3/2020 Rev. 0

Civil Architect Electrical Mechanical HVAC Survey

ATTACHMENTS TYPE:
Material Method Statement Calculation

Sample Shop Drawing Safety Certificate Data Sheet

Sketch Schedule Bending List Insurance

QA & QC Report Equipment Catalog

To: COSMOS ACTION : For Information

APPROVED A

APPROVED AS NOTED B

Attachment No. : NOTED FOR RESUBMIT C

NOT APPROVED D

Subject: Epoxy painting (Ordinary & Anti-Bacteria)

DWG SPEC. OR
QTY Rev. DESCRIPTION ACTION
B.O.Q REF.
supply and apply heavy duty solvent free epoxy coating minimum 400 microns including
skirting as per Manufacturers Instruction, underlying screed layer; approved by consultant with
cove finishing between wall & floor omplete as approved sample by engineer.. daniel B
2020-03-16 15:45:38
supply and apply anti bacterial heavy duty solvent free epoxy coating minimum 400 microns
including skirting as per Manufacturers Instruction underlying screed layer; approved by --------------------------------------------
daniel
B
consultant with cove finishing between wall & floor omplete as approved sample by engineer.. B
2020-03-16 15:45:39
Prepare, supply and apply two coats of anti bacterial heavy duty solvent free epoxy coating
minimum 400 microns as per Manufacturers Instruction ; approved by consultant with cove --------------------------------------------
finishing between wall & floor omplete as approved sample by engineer.. for cold room B
washable plastic Paint and primer /compound w/ texture approved color. As per Architect's
approval.

HAC P.M Signature : Date :

ENGINEER REMARKS :

Jotun is approved as noted daniel

2020-03-16 17:24:35
Jotafloor SF PR 150: approved as a primer
--------------------------------------------
Jotafloor Glass Flake HS: approved as a top-coat (color to be approved by the as
Jotun is approved client)
noted
Jotafloor SF PR 150: approved as a
Clarify area of application and location primer
Jotafloor Glass Flake HS: approved as
Provide anti bacterial Epoxy atop-coat(color to be approved by the client)
Provide complete method of statement for application clarifying all
Clarify the area
used of materials
application and location
Provide Putty material, any used sealers & thinners for approval Provide anti bacterial Epoxy
Provide top-coat color chart for color selection Provide complete method of statement
forapplicationclarifying all the used materials
ACTION FROM COSMOS: Name : Signature : Date :
Provide Putty material, any used
sealers & thinners for approval
Provide top-coat color chart for color
selection
Subject to approved mock-up at site with the designed color.
Submit warranty as per DAR letter ref. E18066-0200S-D-C-01631
Date: November 28, 2020
AHK
November 30, 2020
Subject to approved mock-up at site with the designed color.
Submit warranty as per DAR letter ref. E18066-0200S-D-C-01631
Date: November 28, 2020

AHK
November 30, 2020
6/30/2021 Aconex

Jose Castro Final (WF-041145) GR-NAT-KAE- 2020 - MAS - Jotun- Ep… 4:07 PM
KHATIB AND ALAMI EGYPT WORKFLOW TRANSMITTAL KAE-WTRAN-065321

10th of Ramadan Railway Project - Contract No.[76/M]

Cairo
Cairo
Egypt

MAIL TYPE MAIL NUMBER REFERENCE NUMBER

Workflow Transmittal KAE-WTRAN-065321 KAE-WTRAN-065321

Final (WF-041145) GR-NAT-KAE- 2020 - MAS - Jotun- Epoxy Anti-dust and

waterproofing coating system- Jotafloor EPC 300 PLUS-anti dust finish for wall,
skirting, floors , stairs, ramps for depot buildings waterproofing for floor , skirting and
ramps in

From Mr Jose Castro - Khatib and Alami Egypt

To (9) Mr Mohamed Taha - GAMA-ROWAD (+8 more...)

Cc (2) Mr Ramy Refaat - GAMA-ROWAD (+1 more...)

Sent Wednesday, June 30, 2021 4:07:46 PM EET (GMT +02:00)

Status N/A

DOCUMENT ATTACHMENTS (1)

(0 selected)

Document Revision Submission

File Revision Title Status
No Date Due Date

MAS - Jotun- Epoxy Anti-dust and waterproofing

GR-L22- B-
coating system- Jotafloor EPC 300 PLUS-anti
CO-MAS- Approved
1 6/8/21 dust finish for wall, skirting, floors , stairs, ramps
ARC-400- with
for depot buildings waterproofing for floor , skirting
0094 Comments
and ramps in air condition and cleaning room

ATTRIBUTES

Attribute 1 Architecture

MESSAGE

Workflow Review History

https://mea.aconex.com/Logon 1/2
6/30/2021 Aconex

The attached documents have completed the "GR-NAT-KAE- 2020 - MAS - Jotun- Epoxy Anti-dust and waterproofing coating system- Jotafloor
EPC 300 PLUS-anti dust finish for wall, skirting, floors , stairs, ramps for depot buildings waterproofing for floor , skirting and ramps in air
condition and" workflow with the following results :

This transmittal was automatically generated.

Doc No Step Participant Review Outcome Comments

GR-L22-CO-MAS-ARC- B - Approved with

KAE Step J Castro
400-0094 Comments

https://mea.aconex.com/Logon 2/2
 COLOU R A DDS
FU N C T I O N A L I T Y
G RE Y H A S A WAY OF Cover
Color can add more than aesthetic value
SU I T I N G A N Y ST YL E
Shades of grey are consistently our
to your project. In spaces such as car parks
and airports, choosing different colours for PU CRETE
most popular Jotafloor colours. They different levels can help visitors navigate COLOURS THAT INSPIRE
complement architecture, are flexible to with ease.
suits diverse design styles, and hide subtle
tire marks better than other colours.

U N DE R YOU R FEE T
BU T TO P OF M I N D
Flooring is the most used area in any
business. Whether in a factory, kitchen,
warehouse or car park, the floor takes the
greatest abuse. Our flooring solutions give
you the chance to make your floors durable
and beautiful.

STAY IN TOUCH
At Jotun, we don’t just sell a high-quality
product; we back it up with the highest quality
customer service. We are your partner in
achieving your project’s goals. With industry-
leading technical support and a track record of
global market experience, our aim is to not only
meet, but exceed your needs.

Please contact your local Jotun representative to

learn more about how our products can play an
important role in your projects.

JOTUNPROFESSIONALS.COM
QUA L I T Y FLOO R I N G OU R M OST FI N D YOU R PE RFEC T EL E VAT E YOU R DES I G N
IS T HE F OU N DAT I O N P O PUL A R SH A DES SH A DE OF G RE Y W I T H BOL D COLOU R S
OF A SOL I D BUS I N ESS
Jotafloor products are renowned for their strength,
durability and reliability in the toughest floor
coating applications. With our range of colours
options, you can bring your design vision to life,
9 9 14 RAL 7047 520 960 RAL 7038 4069 962 RAL 7001 599
providing beauty and additional utility.

967 RAL 7035

5090 117 4 0 21 RAL 7004 5 0 47 4044 RAL 5017 368

7 214 19 8 RAL 7042 9 9 12 908 RAL 1013 993 708

997 RAL 7040

8025 RAL 7044 9 61 RAL 7037 969 RAL 7012 414 15 8 8 2230

038

4056 6078 RAL 7043 964 RAL 7015 956 RAL 6019 958 RAL 6021 593

L I N E M A RK I N G

7 0 75 RAL 6032 992 RAL 6010 257

99

0 71

10 8 5 RAL 1023

0 01

925 RAL 3020

Due to the differences in production methods, pigments and gloss levels, deviations can occur
between the samples and delivered products. For critical colour matches, please prepare an
115 950 RAL 6024 on-site sample application before proceeding with the entire job.