Kumho ABS 740 Monday, December 23, 2024
Korea Kumho Petrochemical Co., Ltd. - Acrylonitrile Butadiene Styrene
General Information
Product Description
Features: High impact resistance
Applications: Automobile parts(radiator grill etc), Helmets, Toys
General
Material Status • Commercial: Active
Availability • Asia Pacific • Europe • North America
Features • High Impact Resistance
Uses • Automotive Applications • Safety Helmets • Toys
RoHS Compliance • RoHS Compliant
UL File Number • E65424
ASTM & ISO Properties 1
Physical Nominal Value Unit Test Method
Density / Specific Gravity 1.04 g/cm³ ASTM D792
Density 1.04 g/cm³ ISO 1183
Melt Mass-Flow Rate (MFR) ASTM D1238
200°C/21.6 kg 35 g/10 min
220°C/10.0 kg 25 g/10 min
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg) 25 g/10 min ISO 1133
Molding Shrinkage - Flow 0.50 to 0.80 % ASTM D955
Molding Shrinkage 0.50 to 0.80 % ISO 294-4
Mechanical Nominal Value Unit Test Method
Tensile Strength (Yield) 40.5 MPa ASTM D638
Tensile Stress (Yield) 40.0 MPa ISO 527-2
Tensile Elongation (Yield) 25 % ASTM D638
Tensile Strain (Break) 27 % ISO 527-2
Flexural Modulus 1960 MPa ASTM D790
Flexural Modulus 2000 MPa ISO 178
Flexural Stress 59.0 MPa ISO 178
Flexural Strength (Yield) 56.0 MPa ASTM D790
Impact Nominal Value Unit Test Method
Charpy Notched Impact Strength (23°C) 32 kJ/m² ISO 179/1eA
Notched Izod Impact ASTM D256
23°C, 3.20 mm 350 J/m
23°C, 6.40 mm 290 J/m
Notched Izod Impact Strength (23°C) 31 kJ/m² ISO 180/1A
Hardness Nominal Value Unit Test Method
Rockwell Hardness (R-Scale) 98 ASTM D785
Rockwell Hardness (R-Scale) 98 ISO 2039-2
UL LLC ©2024. All rights reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no
responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection
www.ulprospector.com information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within
our control, and we cannot and will not take responsibility for the information or content.
Page: 1 of 2
Kumho ABS 740
Korea Kumho Petrochemical Co., Ltd. - Acrylonitrile Butadiene Styrene
Thermal Nominal Value Unit Test Method
Deflection Temperature Under Load ISO 75-2/B
0.45 MPa, Unannealed 90.0 °C
Deflection Temperature Under Load ASTM D648
1.8 MPa, Unannealed 84.0 °C
Deflection Temperature Under Load ISO 75-2/A
1.8 MPa, Unannealed 79.0 °C
Vicat Softening Temperature 94.0 °C ASTM D1525 2
Vicat Softening Temperature 94.0 °C ISO 306/B50
Flammability Nominal Value Unit Test Method
Flame Rating (1.6 mm) HB UL 94
Notes
1 Typical properties: these are not to be construed as specifications.
2 Rate A (50°C/h), Loading 2 (50 N)
UL LLC ©2024. All rights reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no
responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection
www.ulprospector.com information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within
our control, and we cannot and will not take responsibility for the information or content.
Page: 2 of 2
