EasyGrid Lithium
Hybrid Power Units for Sustainable 24/7 Electricity
Our EasyGrid range offers a sustainable and efficient alternative to using a diesel generator alone in off grid or remote
locations. From construction sites to rural homes they can deliver power as needed.
The EasyGrid unit connects to a generator, and renewables if
available, storing energy in it’s battery bank until needed. When
power requirements are low – silent, emission free electricity is
supplied from the battery bank, allowing more cost efficient use
of the generator. The generator now only needs to run when the
loads are high or the batteries need to be topped up.
The EasyGrid range features five capacities each one utilising
lithium batteries for the battery bank. Lithium batteries have
numerous advantages over traditional batteries – they are faster
to charge, offer a longer life expectancy and deliver greater
power capacity from a lighter unit – which can be a huge benefit
in remote locations.
Why use an EasyGrid hybrid power system rather than a generator alone?
Connect renewables Lower emissions Reduce fuel costs Silent running
connect solar and wind for free, reduce your carbon footprint and meet less generator run time means less fuel, For quiet periods or at night run from
sustainable energy input new legislative requirements servicing and refuelling visits battery power
An EasyGrid hybrid power system
GENERATOR
AC LOADS
EASYGRID
WIND SOLAR ARRAY
www.hybridpower.co.uk
EasyGrid 5000Li EasyGrid 10000Li EasyGrid 15000Li
Victron MultiPlus 48V Victron Quattro 48V Victron Quattro 48V
Inverter Charger Model
5000VA 10000VA 15000VA
Transfer switch 100A
AC Input 187 - 265VAC 1PH
DC voltage range 38 – 66V
Output Voltage 230VAC ± 2% Frequency: 50Hz ± 0.1% (1)
Cont. output at 25 °C 4000W 9000W 12000W
Cont. output at 40 °C 3700W 8000W 10000W
Peak power 10000W 20000W 25000W
Inlets (Standard) 1 x 32A 1PH 1 x 63A 1PH
Outlets (Standard) 1 x 32A 1PH and 1 x 16A 1PH 1 x 63A 1PH and 1 x 16A 1PH
SOLAR CHARGE CONTROLLER (STANDARD)
Model Victron BlueSolar Charge Controller
Max output current 70A 85A 100A
Max PV power suggested 4kW max. 6.8kW max. 9kW max.
Max PV open circuit voltage 150V 250V
Operating temp. range -20 to +50oC (fan assisted cooling)
MONITORING
Type Victron VRM With Waterproof Touchscreen
BATTERIES
Type / Quantity 2 X 24V 4 X 24V
Cyclic Life 3250
Type Lithium Ion NCA (Nickel, Cobalt and Aluminium)
10kWh 20kWh 30kWh
Capacity (80% DOD)
(Usable 8kWh) (Usable 16kWh) (Usable 24kWh)
ENCLOSURE
Dimensions (mm) (WxDxH) 675 x 925 x 1450 960 x 1420 x 1410
Weight 278kg 355kg 602kg
Lifting options Fork
UPGRADE OPTIONS
Solar • • •
Additional Solar ✔︎ ✔︎ ✔︎
Wind ✔︎ ✔︎ ✔︎
Integral 3G Router ✔︎ ✔︎ ✔︎
Centre Lifting Point ✖︎ ✖︎ ✔︎
HEMS ✖︎ ✖︎ ✔︎
Call 01634 290772 or email [email protected] for your quotation
EasyGrid 30000Li EasyGrid 45000Li
3 x Victron Quattro 48V 3 x Victron Quattro 48V
Inverter Charger Model
10000VA 15000VA
3 x 100A Transfer switch
380-415VAC 3PH AC Input
38 – 66V DC voltage range
400VAC +- 2% Frequency: 50Hz +- 0.1% Output Voltage
27000W 12000W Cont. output at 25 °C
24000W 10000W Cont. output at 40 °C
60000W 25000W Peak power
1 x 63A 3PH and 1 x 16A 1PH Inlets (Standard)
1 x 63A 3PH and 1 x 16A 1PH Outlets (Standard)
SOLAR CHARGE CONTROLLER (ADDITIONAL UPGRADE)
Victron BlueSolar Charge Controller Model
100A Max output current
9kW max. Max PV power suggested
250V Max PV open circuit voltage
-20 to +50oC (fan assisted cooling) Operating temp. range
MONITORING
Victron VRM With Waterproof Touchscreen Type
BATTERIES
6 X 24V Type / Quantity
3250 Cyclic Life
Lithium Ion NCA (Nickel, Cobalt and Aluminium) Type
45kWh
Capacity (80% DOD)
(Usable 36kWh)
ENCLOSURE
1110 x 1810 x 1770 Dimensions (mm) (WxDxH)
894kg 975kg Weight
Fork & Centre Lifting Point Lifting options
UPGRADE OPTIONS
✔ ✔ Solar
✔︎ ✔︎ Additional Solar
✔︎ ✔︎ Wind
✔︎ ✔︎ Integral 3G Router
• • Centre Lifting Point
✔ ✔ HEMS
www.hybridpower.co.uk
• Standard, ✔ Upgrade Available, ✖ Not Available
System Options and Upgrades
Renewable Inputs Advanced Monitoring and Control
Solar Shore
All EasyGrid units are fitted with our
Absorption AC Loads
Adding renewable energy to 814W standard monitoring and control
230W
your EasyGrid is an excellent system which uses touch screen
technology and integrates generator
PV Charger
way of further reducing your fuel 95
–
%
+
240W
costs and emissions. Solar is the
808W
55.1V 15.0A start/stop, quiet time pre-sets,
most popular upgrade option battery monitoring and much more.
on the EasyGrid range and gives a reliable input when sized However for sites with a more complex set up and requirements
and positioned correctly. Our team can help with determining we offer an upgrade to our advanced monitoring and control
the correct solar array size for your needs and each unit has system – HEMS.
detail on the sizing options that work to optimise your power
for peak loads. HEMS
Each solar panel kit & extension packs comes complete with HEMS (Hybrid Energy Management
panels, cables and connectors for your project. Please ask for System). This advanced option helps
prices and we can include this with your quotation. optimise the delivery of power to
a site and gives specific, in depth
Wind efficiency controls as to how loads
are managed on site. The system still gives access to the VRM
All EasyGrid systems have an
online portal but offers additional features including:
upgrade option that allows
owners to integrate a wind • Load shedding
turbine as part of their renewable • Improved energy storage
power input either at time of • Improved battery management
order or retrospectively. Whilst solar arrays are a good source
• Sophisticated quiet time settings
of renewable power, wind turbines can also deliver valuable
additional energy. • Intelligent renewable energy management
Solar power can produce great results when the sun is shining • Detailed monitoring and data collection including emissions
but that may be only for a few hours a day, particularly in the savings
UK. A wind turbine, whilst it may not be as powerful, can be • Multiple outlets on the hybrid unit which can be used and
producing power at any point during the course of 24 hours. independently controlled.
By integrating this additional renewable source, further • Light / rain / temperature sensors can be used to control power
reductions in generator run time, emissions and running costs to certain sockets
can be achieved. • Shedding of non-critical loads to keep total consumption low.
• Intelligent generator starting via multiple start/stop parameters
• Sophisticated quiet time settings
These additional features can be particularly useful for cost savings,
emissions reductions, sustainability improvements and reporting.
Jul 2020
Made in the UK
Designed and built in the UK by Energy Solutions – with over 20 years of electrical power experience, each unit is
manufactured to the exacting standards required for standalone power sources.
Images are for illustrative purposes only and actual products and examples may differ from those shown. All details correct at time of going to press but subject to change. E & EO.”
52 – 54 Riverside, Medway City Estate, Rochester, Kent ME2 4DP tel: 01634 290772 email: [email protected] web: www.hybridpower.co.uk
