150W Single Output with PFC Function S P V- 1 5 0 series

User’s Manual
■ Features :

Universal AC input / Full range

Built-in active PFC function, PF>0.94

Protections: Short circuit / Overload / Over voltage /
Over temperature

Cooling by free air convection

Output voltage programmable from 20~110% by 1~5.5VDC external
control signal

Built-in remote ON-OFF control

Fixed switching frequency at 100KHz

3 years warranty
■ GTIN CODE
MW Search: https://www.meanwell.com/serviceGTIN.aspx Bauar t gepruft
Sicherheit
egel ma ge
od o s
be wac g

SPECIFICATION
www. tuv.com
ID 2000000000

MODEL SPV-150-12 SPV-150-24 SPV-150-48

DC VOLTAGE 12V 24V 48V
RATED CURRENT 12.5A 6.25A 3.125A
CURRENT RANGE 0 ~ 12.5A 0 ~ 6.25A 0 ~ 3.125A
RATED POWER 150W 150W 150W
RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 240mVp-p
OUTPUT VOLTAGE ADJ. RANGE 10.8 ~ 13.2V 20 ~ 26.4V 41 ~ 52.8V
VOLTAGE TOLERANCE Note.3 ±1.0% ±1.0% ±1.0%
LINE REGULATION ±0.3% ±0.2% ±0.2%
LOAD REGULATION ±0.5% ±0.5% ±0.5%
SETUP, RISE TIME 800ms, 50ms/230VAC 2500ms, 50ms/115VAC at full load
HOLD UP TIME (Typ.) 16ms/230VAC 16ms/115VAC at full load
VOLTAGE RANGE Note.5 88 ~ 264VAC 124 ~ 370VDC
FREQUENCY RANGE 47 ~ 63Hz
POWER FACTOR (Typ.) PF>0.94/230VAC PF>0.98/115VAC at full load
INPUT EFFICIENCY (Typ.) 82% 83% 83%
AC CURRENT (Typ.) 2.5A/115VAC 1.25A/230VAC
INRUSH CURRENT (Typ.) 20A/115VAC 45A/230VAC
LEAKAGE CURRENT <1mA / 240VAC
105 ~ 150% rated output power
OVERLOAD
Protection type : Constant current limiting, recovers automatically after fault condition is removed
PROTECTION 13.8 ~ 16.2V 27.6 ~ 32.4V 57.6 ~ 67.2V
OVER VOLTAGE
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down
REMOTE CONTROL 4 ~ 10VDC power off, <0 ~ 0.8VDC power on
FUNCTION
OUTPUT VOLTAGE TRIM 2.4 ~ 13.2V 4.8 ~ 26.4V 9.6 ~ 52.8V
WORKING TEMP. -20 ~ +65℃ (Refer to "Derating Curve")
WORKING HUMIDITY 20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 50℃)
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS UL60950-1, TUV BS EN/ EN62368-1 , IEC62368-1 , EAC TP TC 004 approved
SAFETY WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
(Note 4)
EMC EMISSION Compliance to BS EN/ EN55032 (CISPR32) Class B, BS EN/ EN61000-3-2,-3, EAC TP TC 020
EMC IMMUNITY Compliance to BS EN/ EN61000-4-2,3,4,5,6,8,11, BS EN/ EN55024, light industry level, EAC TP TC 020
MTBF 2112.6K hrs min. Telcordia SR-332 (Bellcore) ; 210.3K hrs min. MIL-HDBK-217F (25℃)
OTHERS DIMENSION 215*115*50mm (L*W*H)
PACKING 1.1Kg; 12pcs/14Kg/0.92CUFT

NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μF & 47μF parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a
360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform
these EMC tests, please refer to “EMI testing of component power supplies.” (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf )
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
6. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx
File Name:SPV-150-SPEC 2024-11-22
 150W Single Output with PFC Function SUPSV-
P -13252005 sseerriiee ss
Mechanical Specification
( Unit: mm , tolerance ± 1 mm) Case No. 912L
27.5 177.5

32.5 150

117.5

LED

+V ADJ.
9
8
7

115
135

50

95
6
9.5

5 4-M4 L=5mm
4

50.5
3
5-M3 L=3mm

32.5
2
8

10
16

15
215
32.5 150
Terminal Pin No. Assignment :
14 max. Pin No. Assignment Pin No. Assignment
1 AC/L 5 PV
25
50

2 AC/N 6~7 DC OUTPUT -V

3 FG 8~9 DC OUTPUT+V
4 RC
6-M4 L=6mm

Block Diagram fosc : 100KHz

ACTIVE RECTIFIERS
EMI INRUSH POWER +V
I/P RECTIFIERS &
FILTER CURRENT SWITCHING -V
LIMITING FILTER

DETECTION PV
FG CIRCUIT
O.L.P. PWM & PFC
CONTROL
O.T.P. O.V.P.

RC

Derating Curve Static Characteristics

100 300
100
90 250
80
80 200

60 70 150
LOAD (%)

LOAD (%)

60 100
40
50 50
20
40 25

-20 0 10 20 30 40 50 60 70 (HORIZONTAL) 88 90 95 100 115 135 155 175 195 230 264

AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (VAC) 60Hz

File Name:SPV-150-SPEC 2024-11-22

 150W Single Output with PFC Function SUPSV-
P -125205 sseerrii eess
Function Manual
1.External Voltage Control

Vout

120

100 100
+V
+V
LOAD
-V

OUTPUT CURRENT (%)

80
OUTPUT VOLTAGE (%)
Non-Linear 80
-V

60 60

PV 40 40
1~5.5V
-V 20 20

V V
1 2 3 4 5 5.5 6 20 40 60 80 100 110 120
EXTERNAL VOLTAGE (DC)
OUTPUT VOLTAGE (%)

File Name:SPV-150-SPEC 2024-11-22