dnp3 Protocol Specifications Manual For Emerson fb3000 Rtus en 7625816
Uploaded by
Julian Ferreiradnp3 Protocol Specifications Manual For Emerson fb3000 Rtus en 7625816
Uploaded by
Julian FerreiraDNP3 Protocol Specifications Manual (for FB3000)
D31858X012
September 2024
DNP3 Protocol Specifications Manual
(for Emerson FB3000 RTUs)
Energy and Transportation Solutions
DNP3 Protocol Specifications Manual (for FB3000)
D31858X012
September 2024
Application & Device Safety Considerations
▪ Reading these Instructions
Before operating a device or application, read these instructions carefully and understand their safety implications.
In some situations, improper use may result in damage or injury. Keep this manual in a convenient location for
future reference. Note that these instructions may not cover all details or variations in equipment or cover every
possible situation regarding installation, operation, or maintenance. Should problems arise that are not covered
sufficiently in the text, immediately contact Energy and Transportation Solutions (ETS) Customer Support for further
information.
▪ Protecting Operating Processes
The failure of a device or application – for whatever reason – may leave an operating process without appropriate
protection and could result in possible damage to property or injury to persons. To protect against this, review the
need for additional backup equipment or provide alternate means of protection (such as alarm devices, output
limiting, fail-safe valves, relief valves, emergency shutoffs, emergency switches, etc.). Contact ETS for additional
information.
▪ Using Qualified Personnel
Installation, configuration, and any subsequent modifications to a device or application should only be performed by
qualified, suitably trained personnel information.
▪ System Training
A well-trained workforce is critical to the success of your operation. Knowing how to correctly install, configure,
program, calibrate, and troubleshoot your Emerson equipment provides your engineers and technicians with the
skills and confidence to optimize your investment. ETS offers a variety of ways for your personnel to acquire essential
system expertise. Our full-time professional instructors can conduct classroom training at several of our corporate
offices, at your site, or even at your regional Emerson office. You can also receive the same quality training via our
live, interactive Emerson Virtual Classroom and save on travel costs. For our complete schedule and further
information, contact the ETS Training Department at 800-338-8158 or email us at [email protected].
▪ Grounding Equipment
Ground metal enclosures and exposed metal parts of electrical instruments in accordance with relevant safety
standards. For the USA, refer to OSHA rules and regulations as specified in Design Safety Standards for Electrical
Systems, 29 CFR, Part 1910, Subpart S, dated: May 16, 1981 (OSHA rulings are in agreement with the National
Electrical Code). For international locations, refer to IEC 60364-4-41: PROTECTION AGAINST ELECTRIC SHOCK. You
must also ground mechanical or pneumatic instruments that include electrically operated devices such as lights,
switches, relays, alarms, or chart drives. The chassis (or earth ground) lug provides a safe connection point to a
customer-designated ground location for ESD and transient voltage suppression. Do not use the chassis ground lug
for signal, common, or return connections. Do not connect the chassis ground lug directly to a lightning
arrestor/lightning rod.
Important: Complying with the codes and regulations of authorities having jurisdiction is essential to ensuring
personnel safety. The guidelines and recommendations in this manual are intended to meet or exceed applicable
codes and regulations. If differences occur between this manual and the codes and regulations of authorities having
jurisdiction, those codes and regulations must take precedence.
▪ Protecting from Electrostatic Discharge (ESD)
Any device contains sensitive electronic components which can be damaged by exposure to an ESD voltage.
Depending on the magnitude and duration of the ESD, it can result in erratic operation or complete failure of the
equipment. Ensure that you correctly care for and handle ESD-sensitive components.
▪ Ethernet Connectivity
This automation device is intended to be used in an Ethernet network which does not have public access. The
inclusion of this device in a publicly accessible Ethernet-based network is not recommended.
▪ Returning Equipment
If you need to return any equipment to ETS, it is your responsibility to ensure that the equipment has been cleaned
to safe levels, as defined and/or determined by applicable federal, state and/or local law regulations or codes. You
also agree to indemnify ETS and hold ETS harmless from any liability or damage which ETS may incur or suffer due to
your failure to ensure device cleanliness.
ii
DNP3 Protocol Specifications Manual (for FB3000)
D31858X012
September 2024
Contents
1. Introduction 1
1.1 Scope ............................................................................................................................................................ 1
1.2 Glossary ....................................................................................................................................................... 1
1.3 DNP3 Protocol Overview ........................................................................................................................... 3
1.4 Color-coding of Content ............................................................................................................................ 3
2. DNP3 Application Layer Definitions 5
2.1 DNP3 Point .................................................................................................................................................. 5
2.2 Index Numbers, Groups, and Variations ................................................................................................ 5
2.3 DNP3 Objects .............................................................................................................................................. 6
2.4 Static, Event, and Class Data ..................................................................................................................... 6
2.4.1 Static Data ....................................................................................................................................... 6
2.4.2 Event Data....................................................................................................................................... 7
2.4.3 DNP3 Classes Data ........................................................................................................................ 7
2.5 Secure Authentication Version 5 (SAv5) .................................................................................................. 7
2.6 DNP3 Object Group Number: 70 .............................................................................................................. 7
2.7 Standard File Operations .......................................................................................................................... 7
3. DNP3 Application Layer Messaging 9
3.1 Function Code Table .................................................................................................................................. 9
4. DNP3 Data Point List 13
4.1 Data Point Mappings: Default and Custom .......................................................................................... 13
4.2 Points Limits per Group: ......................................................................................................................... 13
4.3 Device Attributes: DNP3 Object Group 0 .............................................................................................. 14
4.4 Binary Input: DNP3 Object Groups 1 (Static) & 2 (Events) ................................................................. 15
4.4.1 DNP3 Object Group 1: Binary Input (Static) ............................................................................ 15
4.4.2 DNP3 Object Group 2: Binary Input (Events) .......................................................................... 16
4.5 Binary Output: DNP3 Object Groups 10 (Static) & 12 (Commands) ................................................. 20
4.5.1 DNP3 Object Group 10: Binary Output Static .......................................................................... 20
4.5.2 DNP3 Object Group 12: Binary Output Command or Control Relay Output Block ........... 20
4.6 Binary Counter: DNP3 Object Groups 20 (Static) & 22 (Events) ........................................................ 25
4.6.1 DNP3 Object Group 20: Counters (Static) ................................................................................ 25
4.6.2 DNP3 Object Group 22: Counters (Events) .............................................................................. 25
4.7 Analog Input: DNP3 Object Groups 30 (Static) & 32 (Events) ............................................................ 28
4.7.1 DNP3 Object Group 30: Analog Input (Static) ......................................................................... 28
Contents iii
DNP3 Protocol Specifications Manual (for FB3000)
D31858X012
September 2024
4.7.2 DNP3 Object Group 32: Analog Input (Events) ....................................................................... 28
4.8 Analog Output: DNP3 Object Groups 40 (Status) & 41 (Commands) ............................................... 89
4.8.1 DNP3 Object Group 40: Analog Output (Status) ..................................................................... 89
4.8.2 DNP3 Object Group 41: Analog Output (Commands) ........................................................... 89
4.9 Strings: DNP3 Object Group 110 (Static).............................................................................................217
4.9.1 DNP3 Object Group 110: Octet Strings (Static) .....................................................................217
5. Object Parameter Listing 223
5.1 Measurement Types ..............................................................................................................................223
5.2 Object Parameters .................................................................................................................................278
5.3 Action Blk Parameters ...........................................................................................................................281
5.4 AI Parameters .........................................................................................................................................293
5.5 AICal Parameters ....................................................................................................................................300
5.6 Alarm Parameters ..................................................................................................................................307
5.7 AO Parameters........................................................................................................................................314
5.8 AppInfo Parameters ...............................................................................................................................321
5.9 Average Parameters ..............................................................................................................................325
5.10 Bus Parameters ......................................................................................................................................330
5.11 Clock Parameters ...................................................................................................................................333
5.12 Comm Parameters .................................................................................................................................339
5.13 Components Parameters ......................................................................................................................347
5.14 Ctrl Setup Parameters ...........................................................................................................................363
5.15 DI Parameters .........................................................................................................................................366
5.16 DispChart Parameters ...........................................................................................................................371
5.17 DispList Parameters ...............................................................................................................................373
5.18 DNP3 Parameters ...................................................................................................................................379
5.19 DNPSAV5 Parameters ............................................................................................................................384
5.20 DO Parameters .......................................................................................................................................386
5.21 DP Meter Parameters ............................................................................................................................393
5.22 DP Parameters ........................................................................................................................................412
5.23 Effect Parameters ...................................................................................................................................417
5.24 FBxNConfig Parameters ........................................................................................................................420
5.25 FBxNData Parameters ...........................................................................................................................423
5.26 FBxNDevice Parameters ........................................................................................................................425
5.27 FLTCal Parameters .................................................................................................................................428
5.28 Fluid Prop Parameters ...........................................................................................................................435
5.29 GC Config Parameters ...........................................................................................................................448
5.30 GC Data Parameters ..............................................................................................................................457
5.31 GC Stream Parameters ..........................................................................................................................477
5.32 HART Parameters ...................................................................................................................................486
5.33 HARTChan Parameters ..........................................................................................................................496
5.34 HARTSlave Parameters ..........................................................................................................................498
5.35 Hist Parameters ......................................................................................................................................500
5.36 HistConfig Parameters ..........................................................................................................................502
5.37 Hist Grp Parameters ..............................................................................................................................515
5.38 HostLink Parameters .............................................................................................................................522
iv Contents
DNP3 Protocol Specifications Manual (for FB3000)
D31858X012
September 2024
5.39 IoConfig Parameters ..............................................................................................................................524
5.40 LCDDisplay Parameters .........................................................................................................................529
5.41 Linear Meter Parameters ......................................................................................................................532
5.42 Liq Dens Parameters ..............................................................................................................................551
5.43 Liq FlProp Parameters ...........................................................................................................................553
5.44 Liq LinMtr Parameters ...........................................................................................................................560
5.45 Liq Prod Parameters ..............................................................................................................................584
5.46 Local Parameters ....................................................................................................................................587
5.47 Log Parameters ......................................................................................................................................589
5.48 MapTable Parameters ...........................................................................................................................593
5.49 MasterConf Parameters ........................................................................................................................610
5.50 Math Blk Parameters .............................................................................................................................615
5.51 Module Parameters ...............................................................................................................................620
5.52 Mtr Setup Parameters ...........................................................................................................................627
5.53 PI Parameters .........................................................................................................................................630
5.54 PID Parameters .......................................................................................................................................636
5.55 PollTable Parameters .............................................................................................................................644
5.56 PowerCtrl Parameters ...........................................................................................................................688
5.57 Press Parameters ...................................................................................................................................693
5.58 Printer Parameters .................................................................................................................................699
5.59 Prn Setup Parameters............................................................................................................................701
5.60 RackConfig Parameters .........................................................................................................................703
5.61 Redundancy Parameters .......................................................................................................................705
5.62 Rep Setup Parameters ...........................................................................................................................709
5.63 Report Parameters .................................................................................................................................710
5.64 Role Parameters .....................................................................................................................................712
5.65 RTD Parameters ......................................................................................................................................719
5.66 Security Parameters ...............................................................................................................................727
5.67 Sensor Parameters .................................................................................................................................729
5.68 SlaveConf Parameters ...........................................................................................................................737
5.69 Station Parameters ................................................................................................................................747
5.70 SysLog Parameters.................................................................................................................................767
5.71 System Parameters ................................................................................................................................769
5.72 System Pwr Parameters ........................................................................................................................780
5.73 Total Parameters ....................................................................................................................................783
5.74 TransHConfig Parameters .....................................................................................................................788
5.75 TransHGrp Parameters..........................................................................................................................790
5.76 TransHist ..................................................................................................................................................795
5.77 User Acct Parameters ............................................................................................................................797
5.78 User Data Parameters ...........................................................................................................................799
5.79 4088 Parameters .....................................................................................................................................809
5.80 4088 Config Parameters ........................................................................................................................820
Contents v
DNP3 Protocol Specifications Manual (for FB3000)
D31858X012
September 2024
vi Contents
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
1. Introduction
This DNP3 Protocol Specifications Manual (FB3000) enables internal Emerson personnel,
Emerson customers, and third-party vendors to integrate data to SCADA and other
supervisory systems. The FBxConnect™ configuration software toolset and SCADA
vendors can use this manual to configure, send, and receive data to and from Emerson’s
FB3000 RTUs.
1.1 Scope
This manual covers the implementation of the DNP3 protocol in the FB3000 RTUs. It
should assist SCADA integrators in interfacing DNP3 host-based applications with FB3000
RTUs for both configuration and data collection.
1.2 Glossary
Following are words, terms, and acronyms pertinent to this manual.
Term Definition
ALSFC Application Layer Sub Function Code
Authority A notified body that can change certain parameters on the flow computer which
cannot otherwise be changed by the customer or engineers on site.
CON A bit in the Application Layer’s control byte that specifies whether an Application
Layer confirmation is required.
Control Relay A structured data block appearing in request and response messages
Output Block associated with actuating on/off type output devices.
(CROB)
CRC Cyclic Redundancy Check code that is generated according to a specific
algorithm and transmitted with the message for the purpose of detecting data
corruption during communication via the Physical Layer.
Deprecated Indicates that a feature or requirement is still permitted although its use is
discouraged, and it is not guaranteed to be part of future specification versions.
See also obsolete.
DNP Distributed Network Protocol
DNP3 The third generation of DNP
End device A device that provides information to another (‘host”) device.
FIN Final Data Link frame or final Application Layer fragment in a message
FIR First Data Link frame or first Application Layer fragment in a message
Fragment A packet of bytes that is sized to fit into the buffers of the receiving device’s
Application Layer. Each fragment has an application header and bytes
containing Application Layer request, response or confirmation information.
Frame A packet of octets transmitted from the Data Link Layer in one device to the
Data Link Layer in another device over the Physical Layer. Each frame contains a
link header, cyclic redundancy check (CRC) octets, and sometimes a segment
from the Transport Function.
Host device A device which controls other (“end”) devices.
Introduction 1
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Term Definition
IED Intelligent Electronic Device. These are usually physically located close to
sensors or actuators that are monitored or controlled.
Input Refers to values that are measured, read, or generated by the device and are
reported by an outstation to a host device.
IP Internet Protocol
LSB Least Significant Byte, the byte which represents that part of a value split across
two or more bytes.
LMB Lower Middle Byte
MSB Most Significant Byte, the byte which represents the part of a value split across
two or more bytes.
Octet A group of eight contiguous digital information bits.
Output Refers to values in an outstation or lower-level device that are controlled by
commands from the host device.
Poll A poll is a request for data from a host device.
Private Belonging to or restricted to an individual device not generally known to other
devices.
Request An Application Layer message from a host device that asks an end device to
perform a specific action. A poll is only one type of request with multiple
different types available.
Response An Application Layer message from the end device that is returned to the host
device as the result of a request from the host device.
Route Describes how multiple flow computers can be connected so that they can be
layered on top of one another.
RTU Remote Terminal Unit. Similar to an IED, RTUs are normally placed in the field
close to the sensors or actuators that they monitor or control.
SCADA Supervisor Control and Data Acquisition. A generic term used to indicate
monitoring and controlling devices that are physically located remotely from a
centralized computer. Communications are implied between the central location
and the outlying devices.
Segment A packet of bytes that is sized to fit into a Link Layer frame. Each segment
contains a transport header and a portion of a fragment from the Application
Layer.
SEQ Sequence number that differentiates subsequent Data Link frames or
Application Layer fragments. Sequence numbers associated with unsolicited
responses are distinct from sequence numbers used for solicited messages
Static Data A DNP3 definition for “present” values; the mostly recently measured,
computed, or obtained values.
TCP Transmission Control Protocol
Unsolicited An Application Layer message from a slave device to a master for which no
Response explicit request was received. The request is implied by the act of a master
enabling unsolicited reporting from slave devices.
UNS A bit in the Application Layer’s control byte that specifies whether a fragment
(response and confirmation) pertains to an unsolicited message. When this bit is
set the sequence number in the SEQ field refers to the unsolicited sequence
number.
2 Introduction
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
1.3 DNP3 Protocol Overview
FB3000 RTUs are implemented as DNP3 outstations for communication and configuration
with Emerson Field Tools software and SCADA hosts. DNP3 is an open and public protocol
used to ensure standards-based inter-operability between DNP3 outstations and a SCADA
host.
Notes
When using a serial connection, use the maximum 1024 block size or smaller and
ensure confirmed communications in place.
For further information, refer to IEEE Standard for Electric Power Systems
Communications – Distributed Network Protocol (DNP3), IEEE Std 1815™-2012, published
by the IEEE organization (www.IEEE.com).
DNP3 uses little-endian as the byte order of the messages
The FB3000 RTUs implement the DNP3 level 3 protocol subset.
Introduction 3
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
4 Introduction
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
2. DNP3 Application Layer Definitions
The FB3000 RTUs follow the standard groups, objects, and variations defined as part of
the DNP3 specification. For further information, refer to the IEEE Standard for Electric
Power Systems Communications – Distributed Network Protocol (DNP3), IEEE Std 1815™-2012,
published by the IEEE organization (www.IEEE.com).
2.1 DNP3 Point
The DNP3 point is a uniquely identifiable physical/logical entity that applies to inputs and
outputs like binaries, analogs, and inputs (such as counters).
Point type is an independent array of points having related characteristics.
2.2 Index Numbers, Groups, and Variations
Index numbers identify points having the same point type. They are zero-based and the
lowest element is always zero.
Groups enable you to classify the data types within a message. Each group number
shares a common point type and a common method of data generation and creation. For
example, these are the different group numbers in an analog input point type:
Group Point Type
Group 30 Current value of the point
Group 31 Frozen value of the point
Group 32 Change of current value event
Group 33 Change of frozen value event
Variations are different encoding formats for the data types within a group. Every group
number has an independent set of variations. For example, these might be the variations
in group 20:
Variation Format
Variation 1 32-bit with flag
Variation 2 16-bit with flag
Variation 3 32-bit with flag, delta
Variation 4 16-bit with flag, delta
Variation 5 32-bit without flag
Variation 6 16-bit without flag
Variation 7 32-bit without flag, delta
Variation 8 16-bit without flag, delta
DNP3 Application Layer Definitions 5
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
2.3 DNP3 Objects
An object is an encoded representation of data from a point. The system formats data
according to its group and variation number in order to transport the message.
DNP3 messages may contain multiple objects, each representing the value of a point at a
given instant in time or a command to be issued to an output point.
The supported DNP3 objects and groups are:
Name Group Number
Device Attributes 0
Binary Inputs 1, 2
Binary Outputs 10
Control Relay Output (CROB) 12
Binary Counters 20, 21, 22, 23
Analog Inputs 30, 32
Analog Outputs 40, 41
Time and Data 50
Class 60
Internal Indications 80
Octet String 110
Authentication 120
Security Statistics 121
Security Statistics Events 122
2.4 Static, Event, and Class Data
2.4.1 Static Data
Static data refers to a point’s current or most recently recorded value. For binary input
points, “static data” refers to the present on/off condition.
2.4.2 Event Data
Events are associations with changes in points, such as state changes, measurement at
some threshold, or an analog input changing by more than its defined dead band.
Structured information stored in each event includes:
Type of event
Value
Point index
Time when event occurred
6 DNP3 Application Layer Definitions
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Class assignment
2.4.3 DNP3 Classes Data
Classes organize events and current values into categories:
Class 0 data refers to static data. When a host device requests class 0 data from an
RTU, the end device reports back the most recently measured, computed, or obtained
values for the different point types.
Class 1, 2, and 3 are event classes. DNP3 does not assign significance to these event
classes. Implementations can use different strategies around these classes, such as
assigning highest priority events to class 1 and lowest priority events to class 3. Host
devices may request events from one or more of these classes.
2.5 Secure Authentication Version 5 (SAv5)
With firmware version 2.13.0.88 or newer, the FBx Series devices support Secure
Authentication Version 5 (SAv5). SAv5 authenticates the devices with the hosts which
significantly improves resistance to outside influences. The FBx Series devices support
SAv5 using a pre-shared key (a single key per device) which can be updated using Field
Tools
For implementation details on SAv5 please contact the DNP3 Users Group
(www.dnp.org/About/DNP-Users-Group). For additional details on getting your devices set
up with Sav5, contact your local sales representative.
2.6 DNP3 Object Group Number: 70
The system supports the following variations:
3 – File Command Object
4 – File Command Status Object
5 – File Transfer Object
6 – File Transfer Status
7 – File Descriptor Object
2.7 Standard File Operations
DNP3 differentiates file types into two types, simple files and directory files.
DNP3 supports the following file operations:
Open file
Close file
Delete file
Read file
Write file
The RTU supports the following types of file operations:
DNP3 Application Layer Definitions 7
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
1. General file operations
The system stores general files in the \\user\\ folder. Host devices can read and write
files based in \\user\\ folder. When performing any file operations, you need to specify
the absolute path.
2. General Zip Files
The system retrieves the files using a zip format by specifying the gz command in
front of the file path when issuing a file read.
Example:
gz:/protocol/dnp3/map1/AnlgIng_Group_30_32.pro
8 DNP3 Application Layer Definitions
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
3. DNP3 Application Layer Messaging
Host devices send a request fragment to an end device to execute a command or return
data. The end device performs the requested action, generates the appropriate response,
and transmits it back to the host device.
The end device may transmit unsolicited response messages to the host. DNP message
fragments can contain header, data, and checksum bytes. Figure 3-1 shows the
request/response message fragment.
Figure 3-1. DNP3 Request/Response Message Fragment
Start of Fragment
Application First Object Last Object DNP3
Req/Resp DNP3 Objects
Header Header Objects
Header
Application Function Internal Indications
Control Code
LSB MSB
Application control byte
7 6 5 4 3 2 1 0 Bit number
SEQ
CON
UNS
FIN
FIR
Each fragment (request or response) begins with an application header that contains
message control information. The application response header contains an additional
field called “internal indications.”
3.1 Function Code Table
The function code octet identifies the purpose of the message. Request messages from
host devices use function codes in the range of 0 to 128, and response messages from
outstations use function codes with values ranging from 129 to 255. The following table
describes the function codes.
DNP3 Application Layer Messaging 9
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Requests (Hex)
0x00 Confirm
0x01 Read
0x02 Write
0x03 Select
0x04 Operate
0x05 Direct operate
0x06 Direct operate – no response
0x07 Freeze
0x08 Freeze – no response
0x09 Freeze clear
0x0A Freeze clear – no response
0x0B Freeze at time
0x0C Freeze at time – no response
0x0D Cold start
0x0E Warm start
0x0F Initialize data
0x10 Initialized application
0x11 Start application
0x12 Stop application
0x13 Save configuration
0x14 Enable unsolicited messages
0x15 Disable unsolicited messages
0x16 Assign class
0x17 Delay measurements
0x18 Record measurement
0x19 Open file
0x1A Close file
0x1B Delete file
0x1C Get file information
0x1D Authenticate file
0x1E Abort file
0x1F Activate configuration
0x20 Authenticate request
0x21 Authenticate request – no ack
Requests (Hex)
0x81 Response
10 DNP3 Application Layer Messaging
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Requests (Hex)
0x82 Unsolicited response
0x83 Authenticate response
DNP3 Application Layer Messaging 11
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
12 DNP3 Application Layer Messaging
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
4. DNP3 Data Point List
FB3000 RTUs statically map DNP3 data points to tags.
4.1 Data Point Mappings: Default and Custom
The FB3000 provides a default mapping of data points which represents what a typical
customer might need. The default mapping is an out-of-the-box solution that accesses
information for approximately 24 instances of each type of meter and station, along with
a full (7-slot) chassis of IO modules, along with other things (such as components, PIDs,
and user data).
Take time to review the information in this chapter against your organization’s
requirements. If you need DNP3 access to additional device parameters not present in the
default map, you can create a custom data point map using FBxConnect (refer to the
DNP3 Mapping topic in the online help for FBxConnect) that replaces the default mapping.
While this option would enable you to explicity define the additional points to access, you
must also include in the custom map all the standard data points present in the default
map. Otherwise those data points are not available when you change the Active DNP3
Map setting in FBxConnect to User Defined.
To obtain a report of the current data point map, issue a series of DNP3 file read requests
to the device to read the binary files which define the currently active point mapping for
any group. Filenames include:
▪ /protocol/dnp3/activemap/AnigIn_Group30_32.pro
▪ /protocol/dnp3/activemap/AnigOut_Group40_41.pro
▪ /protocol/dnp3/activemap/BinIn_Group1_2.pro
▪ /protocol/dnp3/activemap/BinOut_Group10_12.pro
▪ /protocol/dnp3/activemap/Counters_Group20_22_21_23.pro
▪ /protocol/dnp3/activemap/String_Group110.pro
4.2 Points Limits per Group:
2.5.X.X firmware and older
▪ Group 1 and 2 – 150
▪ Groups 10 and 11 - 150
▪ Groups 20 and 22 - 100
▪ Groups 30 and 32 - 1950
▪ Groups 40 and 41 - 4100
▪ Group 110 – 200
2.7.X.X firmware and newer
DNP3 Data Point List 13
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
▪ Group 1 and 2 – 10000
▪ Groups 10 and 11 - 10000
▪ Groups 20 and 22 - 10000
▪ Groups 30 and 32 - 10000
▪ Groups 40 and 41 - 10000
▪ Group 110 – 10000
Important
This chapter discusses the default data point map provided for the FB3000.
4.3 Device Attributes: DNP3 Object Group 0
This group can be read with the next possible variations:
Variation Variation String Name
209 Secure Authentication Version
210 Number of security statistics per association
211 ID of support for user-specific attributes
212 Number of Master-Defined Data Set Prototypes
213 Number of Outstation-Defined Data Set Prototypes
214 Number of Master-Defined Data Sets
215 Number of Outstation-Defined Data Sets
216 Max number of binary outputs from object group 12 per request
217 Local timing accuracy
218 Duration of time accuracy (following a time syncronization)
219 Analog output events supported
220 Maximum analog output index
221 Number of analog output points
222 Binary output events supported
223 Maximum binary output index
224 Number of binary output points
225 Frozen counter events supported
226 Frozen counts supported
227 Counter events supported
228 Maximum counter index
229 Number of counter points
14 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Variation Variation String Name
230 Frozen analog inputs supported
231 Analog input events supported
232 Maximum analog input index
233 Number of analog input points
234 Double-bit binary input events supported
235 Maximum double-bit binary input index
236 Number of double-bit binary input points
237 Binary input events supported
238 Maximum binary input index
239 Number of binary input points
240 Maximum transmit fragment size
241 Maximum receive fragment size
242 Device manufacture’s software version string
243 Device manufacture’s hardware version string
245 User-assigned location name or code string
246 User-assigned ID code/number satring
247 User-assigned name string for the outstation
248 Device serial number string
249 DNP subset level and conformance
250 Device manufacture’s product name and model
252 Device manufacture’s name string
254 Non-specific all attributes value request
255 List of all attribute variations
4.4 Binary Input: DNP3 Object Groups 1 (Static) & 2
(Events)
4.4.1 DNP3 Object Group 1: Binary Input (Static)
This group can be read with the following variations:
▪ Variation 1: Package format having single bit binary input state without status flags
▪ Variation 2: Each DNP3 point is returned with a single byte having status flags
indicating the point status (such as online/offline, comm lost, over range, etc.)
DNP3 Data Point List 15
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
4.4.2 DNP3 Object Group 2: Binary Input (Events)
This group can be read with the following variations:
▪ Variation 1: A single byte for reporting state of input and status flags without time
▪ Variation 2: A single byte for reporting state of input and status flags with absolute
time when the event occurred.
▪ Variation 3: A single byte for reporting state of input and status flags with relative
time. A preceding common time of occurrence (CTO) object, group 51, establishes the
basis for relative time.
Name for State Name for State Default Class
Point Index Tag Mapped when value = 0 when value = 1 Assigned
0 System Pwr_1.SRAM_BATT_STATUS Normal Failed Class_1
1 Module_1.INSTALLED No Yes Class_3
2 Module_2.INSTALLED No Yes Class_3
3 Module_3.INSTALLED No Yes Class_3
4 Module_4.INSTALLED No Yes Class_3
5 Module_5.INSTALLED No Yes Class_3
6 Module_6.INSTALLED No Yes Class_3
7 Module_7.INSTALLED No Yes Class_3
8 Module_8.INSTALLED No Yes Class_3
9 DI_2-1.SELECTED OFF ON Class_1
10 DI_2-2.SELECTED OFF ON Class_1
11 DI_2-3.SELECTED OFF ON Class_1
12 DI_2-4.SELECTED OFF ON Class_1
13 DI_2-5.SELECTED OFF ON Class_1
14 DI_2-6.SELECTED OFF ON Class_1
15 DI_2-7.SELECTED OFF ON Class_1
16 DI_2-8.SELECTED OFF ON Class_1
17 DI_3-1.SELECTED OFF ON Class_1
18 DI_3-2.SELECTED OFF ON Class_1
19 DI_3-3.SELECTED OFF ON Class_1
20 DI_3-4.SELECTED OFF ON Class_1
21 DI_3-5.SELECTED OFF ON Class_1
22 DI_3-6.SELECTED OFF ON Class_1
23 DI_3-7.SELECTED OFF ON Class_1
24 DI_3-8.SELECTED OFF ON Class_1
16 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Name for State Name for State Default Class
Point Index Tag Mapped when value = 0 when value = 1 Assigned
25 DI_4-1.SELECTED OFF ON Class_1
26 DI_4-2.SELECTED OFF ON Class_1
27 DI_4-3.SELECTED OFF ON Class_1
28 DI_4-4.SELECTED OFF ON Class_1
29 DI_4-5.SELECTED OFF ON Class_1
30 DI_4-6.SELECTED OFF ON Class_1
31 DI_4-7.SELECTED OFF ON Class_1
32 DI_4-8.SELECTED OFF ON Class_1
33 DI_5-1.SELECTED OFF ON Class_1
34 DI_5-2.SELECTED OFF ON Class_1
35 DI_5-3.SELECTED OFF ON Class_1
36 DI_5-4.SELECTED OFF ON Class_1
37 DI_5-5.SELECTED OFF ON Class_1
38 DI_5-6.SELECTED OFF ON Class_1
39 DI_5-7.SELECTED OFF ON Class_1
40 DI_5-8.SELECTED OFF ON Class_1
41 DI_6-1.SELECTED OFF ON Class_1
42 DI_6-2.SELECTED OFF ON Class_1
43 DI_6-3.SELECTED OFF ON Class_1
44 DI_6-4.SELECTED OFF ON Class_1
45 DI_6-5.SELECTED OFF ON Class_1
46 DI_6-6.SELECTED OFF ON Class_1
47 DI_6-7.SELECTED OFF ON Class_1
48 DI_6-8.SELECTED OFF ON Class_1
49 DI_7-1.SELECTED OFF ON Class_1
50 DI_7-2.SELECTED OFF ON Class_1
51 DI_7-3.SELECTED OFF ON Class_1
52 DI_7-4.SELECTED OFF ON Class_1
53 DI_7-5.SELECTED OFF ON Class_1
54 DI_7-6.SELECTED OFF ON Class_1
55 DI_7-7.SELECTED OFF ON Class_1
56 DI_7-8.SELECTED OFF ON Class_1
DNP3 Data Point List 17
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Name for State Name for State Default Class
Point Index Tag Mapped when value = 0 when value = 1 Assigned
57 DI_8-1.SELECTED OFF ON Class_1
58 DI_8-2.SELECTED OFF ON Class_1
59 DI_8-3.SELECTED OFF ON Class_1
60 DI_8-4.SELECTED OFF ON Class_1
61 DI_8-5.SELECTED OFF ON Class_1
62 DI_8-6.SELECTED OFF ON Class_1
63 DI_8-7.SELECTED OFF ON Class_1
64 DI_8-8.SELECTED OFF ON Class_1
65 DO_2-1.SELECTED OFF ON Class_1
66 DO_2-2.SELECTED OFF ON Class_1
67 DO_3-1.SELECTED OFF ON Class_1
68 DO_3-2.SELECTED OFF ON Class_1
69 DO_4-1.SELECTED OFF ON Class_1
70 DO_4-2.SELECTED OFF ON Class_1
71 DO_5-1.SELECTED OFF ON Class_1
72 DO_5-2.SELECTED OFF ON Class_1
73 DO_6-1.SELECTED OFF ON Class_1
74 DO_6-2.SELECTED OFF ON Class_1
75 DO_7-1.SELECTED OFF ON Class_1
76 DO_7-2.SELECTED OFF ON Class_1
77 DO_8-1.SELECTED OFF ON Class_1
78 DO_8-2.SELECTED OFF ON Class_1
79 PID_1.OUTPUT_MODE Manual Auto Class_3
80 PID_2.OUTPUT_MODE Manual Auto Class_3
81 PID_3.OUTPUT_MODE Manual Auto Class_3
82 PID_4.OUTPUT_MODE Manual Auto Class_3
83 PID_5.OUTPUT_MODE Manual Auto Class_3
84 PID_6.OUTPUT_MODE Manual Auto Class_3
85 PID_7.OUTPUT_MODE Manual Auto Class_3
86 PID_8.OUTPUT_MODE Manual Auto Class_3
87 PID_9.OUTPUT_MODE Manual Auto Class_3
88 PID_10.OUTPUT_MODE Manual Auto Class_3
18 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Name for State Name for State Default Class
Point Index Tag Mapped when value = 0 when value = 1 Assigned
89 PID_11.OUTPUT_MODE Manual Auto Class_3
90 PID_12.OUTPUT_MODE Manual Auto Class_3
91 PID_13.OUTPUT_MODE Manual Auto Class_3
92 PID_14.OUTPUT_MODE Manual Auto Class_3
93 PID_15.OUTPUT_MODE Manual Auto Class_3
94 PID_16.OUTPUT_MODE Manual Auto Class_3
95 PID_17.OUTPUT_MODE Manual Auto Class_3
96 PID_18.OUTPUT_MODE Manual Auto Class_3
97 PID_19.OUTPUT_MODE Manual Auto Class_3
98 PID_20.OUTPUT_MODE Manual Auto Class_3
99 PID_21.OUTPUT_MODE Manual Auto Class_3
100 PID_22.OUTPUT_MODE Manual Auto Class_3
101 PID_23.OUTPUT_MODE Manual Auto Class_3
102 PID_24.OUTPUT_MODE Manual Auto Class_3
DNP3 Data Point List 19
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
4.5 Binary Output: DNP3 Object Groups 10 (Static) & 12
(Commands)
4.5.1 DNP3 Object Group 10: Binary Output Static
This group can be read with the following variations:
▪ Variation 1: Package format having single bit binary input state without status flags
▪ Variation 2: Each DNP3 point is returned with a single byte having status flags
indicating the point status (such as online/offline, comm lost, over range, etc.)
4.5.2 DNP3 Object Group 12: Binary Output Command or Control
Relay Output Block (CROB)
This group can be read with the following variations:
▪ Variation 1: Control Relay Output Block
▪ Variation 2: Pattern Control Block (PCB); this variation is not supported.
▪ Variation 3: Pattern Control Mask (PCM); this variation is not supported.
Point Name for State Name for State Default Class
Index Tag Mapped when value = 0 when value = 1 Assigned
0 PI_2-1.USER_MODE Live Override Class_3
1 PI_2-2.USER_MODE Live Override Class_3
2 PI_2-3.USER_MODE Live Override Class_3
3 PI_2-4.USER_MODE Live Override Class_3
4 PI_2-5.USER_MODE Live Override Class_3
5 PI_2-6.USER_MODE Live Override Class_3
6 PI_2-7.USER_MODE Live Override Class_3
7 PI_2-8.USER_MODE Live Override Class_3
8 PI_3-1.USER_MODE Live Override Class_3
9 PI_3-2.USER_MODE Live Override Class_3
10 PI_3-3.USER_MODE Live Override Class_3
11 PI_3-4.USER_MODE Live Override Class_3
12 PI_3-5.USER_MODE Live Override Class_3
13 PI_3-6.USER_MODE Live Override Class_3
14 PI_3-7.USER_MODE Live Override Class_3
15 PI_3-8.USER_MODE Live Override Class_3
16 PI_4-1.USER_MODE Live Override Class_3
17 PI_4-2.USER_MODE Live Override Class_3
20 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Point Name for State Name for State Default Class
Index Tag Mapped when value = 0 when value = 1 Assigned
18 PI_4-3.USER_MODE Live Override Class_3
19 PI_4-4.USER_MODE Live Override Class_3
20 PI_4-5.USER_MODE Live Override Class_3
21 PI_4-6.USER_MODE Live Override Class_3
22 PI_4-7.USER_MODE Live Override Class_3
23 PI_4-8.USER_MODE Live Override Class_3
24 PI_5-1.USER_MODE Live Override Class_3
25 PI_5-2.USER_MODE Live Override Class_3
26 PI_5-3.USER_MODE Live Override Class_3
27 PI_5-4.USER_MODE Live Override Class_3
28 PI_5-5.USER_MODE Live Override Class_3
29 PI_5-6.USER_MODE Live Override Class_3
30 PI_5-7.USER_MODE Live Override Class_3
31 PI_5-8.USER_MODE Live Override Class_3
32 PI_6-1.USER_MODE Live Override Class_3
33 PI_6-2.USER_MODE Live Override Class_3
34 PI_6-3.USER_MODE Live Override Class_3
35 PI_6-4.USER_MODE Live Override Class_3
36 PI_6-5.USER_MODE Live Override Class_3
37 PI_6-6.USER_MODE Live Override Class_3
38 PI_6-7.USER_MODE Live Override Class_3
39 PI_6-8.USER_MODE Live Override Class_3
40 PI_7-1.USER_MODE Live Override Class_3
41 PI_7-2.USER_MODE Live Override Class_3
42 PI_7-3.USER_MODE Live Override Class_3
43 PI_7-4.USER_MODE Live Override Class_3
44 PI_7-5.USER_MODE Live Override Class_3
45 PI_7-6.USER_MODE Live Override Class_3
46 PI_7-7.USER_MODE Live Override Class_3
47 PI_7-8.USER_MODE Live Override Class_3
48 PI_8-1.USER_MODE Live Override Class_3
49 PI_8-2.USER_MODE Live Override Class_3
DNP3 Data Point List 21
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Point Name for State Name for State Default Class
Index Tag Mapped when value = 0 when value = 1 Assigned
50 PI_8-3.USER_MODE Live Override Class_3
51 PI_8-4.USER_MODE Live Override Class_3
52 PI_8-5.USER_MODE Live Override Class_3
53 PI_8-6.USER_MODE Live Override Class_3
54 PI_8-7.USER_MODE Live Override Class_3
55 PI_8-8.USER_MODE Live Override Class_3
56 DO_2-1.OVRD Live Override Class_1
57 DO_2.2.OVRD Live Override Class_1
58 DO_3-1.OVRD Live Override Class_1
59 DO_3.2.OVRD Live Override Class_1
60 DO_4-1.OVRD Live Override Class_1
61 DO_4.2.OVRD Live Override Class_1
62 DO_5-1.OVRD Live Override Class_1
63 DO_5.2.OVRD Live Override Class_1
64 DO_6-1.OVRD Live Override Class_1
65 DO_6.2.OVRD Live Override Class_1
66 DO_7-1.OVRD Live Override Class_1
67 DO_7.2.OVRD Live Override Class_1
68 DO_8-1.OVRD Live Override Class_1
69 DO_8.2.OVRD Live Override Class_1
70 PID_1.PID_ENABLE Disable Enable None
71 PID_1.OUTPUT_TYPE Analog Discrete None
72 PID_2.PID_ENABLE Disable Enable None
73 PID_2.OUTPUT_TYPE Analog Discrete None
74 PID_3.PID_ENABLE Disable Enable None
75 PID_3.OUTPUT_TYPE Analog Discrete None
76 PID_4.PID_ENABLE Disable Enable None
77 PID_4.OUTPUT_TYPE Analog Discrete None
78 PID_5.PID_ENABLE Disable Enable None
79 PID_5.OUTPUT_TYPE Analog Discrete None
80 PID_6.PID_ENABLE Disable Enable None
81 PID_6.OUTPUT_TYPE Analog Discrete None
22 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Point Name for State Name for State Default Class
Index Tag Mapped when value = 0 when value = 1 Assigned
82 PID_7.PID_ENABLE Disable Enable None
83 PID_7.OUTPUT_TYPE Analog Discrete None
84 PID_8.PID_ENABLE Disable Enable None
85 PID_8.OUTPUT_TYPE Analog Discrete None
86 PID_9.PID_ENABLE Disable Enable None
87 PID_9.OUTPUT_TYPE Analog Discrete None
88 PID_10.PID_ENABLE Disable Enable None
89 PID_10.OUTPUT_TYPE Analog Discrete None
90 PID_11.PID_ENABLE Disable Enable None
91 PID_11.OUTPUT_TYPE Analog Discrete None
92 PID_12.PID_ENABLE Disable Enable None
93 PID_12.OUTPUT_TYPE Analog Discrete None
94 PID_13.PID_ENABLE Disable Enable None
95 PID_13.OUTPUT_TYPE Analog Discrete None
96 PID_14.PID_ENABLE Disable Enable None
97 PID_14.OUTPUT_TYPE Analog Discrete None
98 PID_15.PID_ENABLE Disable Enable None
99 PID_15.OUTPUT_TYPE Analog Discrete None
100 PID_16.PID_ENABLE Disable Enable None
101 PID_16.OUTPUT_TYPE Analog Discrete None
102 PID_17.PID_ENABLE Disable Enable None
103 PID_17.OUTPUT_TYPE Analog Discrete None
104 PID_18.PID_ENABLE Disable Enable None
105 PID_18.OUTPUT_TYPE Analog Discrete None
106 PID_19.PID_ENABLE Disable Enable None
107 PID_19.OUTPUT_TYPE Analog Discrete None
108 PID_20.PID_ENABLE Disable Enable None
109 PID_20.OUTPUT_TYPE Analog Discrete None
110 PID_21.PID_ENABLE Disable Enable None
111 PID_21.OUTPUT_TYPE Analog Discrete None
112 PID_22.PID_ENABLE Disable Enable None
113 PID_22.OUTPUT_TYPE Analog Discrete None
DNP3 Data Point List 23
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Point Name for State Name for State Default Class
Index Tag Mapped when value = 0 when value = 1 Assigned
114 PID_23.PID_ENABLE Disable Enable None
115 PID_23.OUTPUT_TYPE Analog Discrete None
116 PID_24.PID_ENABLE Disable Enable None
117 PID_24.OUTPUT_TYPE Analog Discrete None
118 Components_1.APPLY_COMP NoAction AcceptComp None
119 Components_2.APPLY_COMP NoAction AcceptComp None
120 Components_3.APPLY_COMP NoAction AcceptComp None
121 Components_4.APPLY_COMP NoAction AcceptComp None
122 Components_5.APPLY_COMP NoAction AcceptComp None
123 Components_6.APPLY_COMP NoAction AcceptComp None
124 Components_7.APPLY_COMP NoAction AcceptComp None
125 Components_8.APPLY_COMP NoAction AcceptComp None
126 Components_9.APPLY_COMP NoAction AcceptComp None
127 Components_10.APPLY_COMP NoAction AcceptComp None
128 Components_11.APPLY_COMP NoAction AcceptComp None
129 Components_12.APPLY_COMP NoAction AcceptComp None
130 Components_13.APPLY_COMP NoAction AcceptComp None
131 Components_14.APPLY_COMP NoAction AcceptComp None
132 Components_15.APPLY_COMP NoAction AcceptComp None
133 Components_16.APPLY_COMP NoAction AcceptComp None
134 Components_17.APPLY_COMP NoAction AcceptComp None
135 Components_18.APPLY_COMP NoAction AcceptComp None
136 Components_19.APPLY_COMP NoAction AcceptComp None
137 Components_20.APPLY_COMP NoAction AcceptComp None
138 Components_21.APPLY_COMP NoAction AcceptComp None
139 Components_22.APPLY_COMP NoAction AcceptComp None
140 Components_23.APPLY_COMP NoAction AcceptComp None
141 Components_24.APPLY_COMP NoAction AcceptComp None
24 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
4.6 Binary Counter: DNP3 Object Groups 20 (Static) & 22
(Events)
4.6.1 DNP3 Object Group 20: Counters (Static)
This group can be read with the following variations:
▪ Variation 1: 32-bit with flag
▪ Variation 2: 16-bit with flag
▪ Variation 3: 32-bit with flag, delta
▪ Variation 4: 16-bit with flag, delta
▪ Variation 5: 32-bit without flag
▪ Variation 6: 16-bit without flag
▪ Variation 7: 32-bit without flag, delta
▪ Variation 8: 16-bit without flag, delta
4.6.2 DNP3 Object Group 22: Counters (Events)
This group can be read with the following variations:
▪ Variation 1: 32-bit with flag
▪ Variation 2: 16-bit with flag
▪ Variation 3: 32-bit with flag, delta
▪ Variation 4: 16-bit with flag, delta
▪ Variation 5: 32-bit with flag and time
▪ Variation 6: 16-bit with flag and time
▪ Variation 7: 32-bit with flag and time, delta
▪ Variation 8: 16-bit with flag and time, delta
Group 20 Group 22
Point Default Default Default
Index Tag Mapped Class Variation Variation
0 PI_2-1.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
1 PI_2-2.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
2 PI_2-3.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
3 PI_2-4.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
4 PI_2-5.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
5 PI_2-6.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
6 PI_2-7.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
7 PI_2-8.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
8 PI_3-1.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
DNP3 Data Point List 25
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 20 Group 22
Point Default Default Default
Index Tag Mapped Class Variation Variation
9 PI_3-2.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
10 PI_3-3.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
11 PI_3-4.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
12 PI_3-5.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
13 PI_3-6.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
14 PI_3-7.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
15 PI_3-8.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
16 PI_4-1.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
17 PI_4-2.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
18 PI_4-3.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
19 PI_4-4.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
20 PI_4-5.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
21 PI_4-6.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
22 PI_4-7.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
23 PI_4-8.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
24 PI_5-1.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
25 PI_5-2.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
26 PI_5-3.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
27 PI_5-4.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
28 PI_5-5.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
29 PI_5-6.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
30 PI_5-7.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
31 PI_5-8.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
32 PI_6-1.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
33 PI_6-2.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
34 PI_6-3.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
35 PI_6-4.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
36 PI_6-5.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
37 PI_6-6.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
38 PI_6-7.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
39 PI_6-8.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
26 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 20 Group 22
Point Default Default Default
Index Tag Mapped Class Variation Variation
40 PI_7-1.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
41 PI_7-2.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
42 PI_7-3.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
43 PI_7-4.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
44 PI_7-5.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
45 PI_7-6.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
46 PI_7-7.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
47 PI_7-8.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
48 PI_8-1.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
49 PI_8-2.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
50 PI_8-3.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
51 PI_8-4.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
52 PI_8-5.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
53 PI_8-6.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
54 PI_8-7.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
55 PI_8-8.PULSE_DAY_ACCUM_32 Class_3 Variation 1 Variation 5
DNP3 Data Point List 27
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
4.7 Analog Input: DNP3 Object Groups 30 (Static) & 32
(Events)
4.7.1 DNP3 Object Group 30: Analog Input (Static)
This group can be read with the following variations:
▪ Variation 1: 32-bit with flag
▪ Variation 2: 16-bit with flag
▪ Variation 3: 32-bit without flag
▪ Variation 4: 16-bit without flag
▪ Variation 5: Single-precision floating point with flag
▪ Variation 6: Double-precision floating point with flat
4.7.2 DNP3 Object Group 32: Analog Input (Events)
This group can be read with the following variations:
▪ Variation 1: 32-bit with flag
▪ Variation 2: 16-bit with flag
▪ Variation 3: 32-bit without flag
▪ Variation 4: 16-bit without flag
▪ Variation 5: Single-precision floating point without time
▪ Variation 6: Double-precision floating point without time
▪ Variation 7: Single-precision floating point with time
▪ Variation 8: Double-precision floating point with time
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
0 System_1.PROD.TYPE None Variation 2 Variation 4
1 System_1.MPU_LOAD None Variation 5 Variation 7
2 System_1.MAX_PID Class_3 Variation 1 Variation 3
3 System_1.MAX.STN Class_3 Variation 1 Variation 3
4 System_1.MAX_STRM Class_3 Variation 1 Variation 3
5 System_1.NUM_ALM Class_2 Variation 1 Variation 3
6 System_1.NUM_EVT Class_2 Variation 1 Variation 3
7 System_1.NUM_WM_EVT Class_2 Variation 1 Variation 3
8 System Pwr_1.EXT_VOLT_VAL Class_1 Variation 5 Variation 7
9 System Pwr_1.EXT_VOLT_ALM.PROCESS_ALM Class_1 Variation 2 Variation 4
10 Clock_1.TIME Class_2 Variation 6 Variation 8
28 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
11 Clock_1.YEAR Class_2 Variation 2 Variation 4
12 Clock_1.MONTH Class_2 Variation 2 Variation 4
13 Clock_1.DAY Class_2 Variation 2 Variation 4
14 Clock_1.HOUR Class_2 Variation 2 Variation 4
15 Clock_1.SECOND Class_2 Variation 2 Variation 4
16 Clock_1.MINUTE Class_2 Variation 2 Variation 4
17 Mtr Setup_1.MAX_MTRS Class_3 Variation 2 Variation 4
18 Module_1.MOD_TYPE None Variation 2 Variation 4
19 Module_1.MOD_MODE Class_3 Variation 2 Variation 4
20 Module_1.PM_STATUS Class_1 Variation 2 Variation 4
21 Module_2.MOD_TYPE None Variation 2 Variation 4
22 Module_2.MOD_MODE Class_3 Variation 2 Variation 4
23 Module_2.PM_STATUS Class_1 Variation 2 Variation 4
24 Module_3.MOD_TYPE None Variation 2 Variation 4
25 Module_3.MOD_MODE Class_3 Variation 2 Variation 4
26 Module_3.PM_STATUS Class_1 Variation 2 Variation 4
27 Module_4.MOD_TYPE None Variation 2 Variation 4
28 Module_4.MOD_MODE Class_3 Variation 2 Variation 4
29 Module_4.PM_STATUS Class_1 Variation 2 Variation 4
30 Module_5.MOD_TYPE None Variation 2 Variation 4
31 Module_5.MOD_MODE Class_3 Variation 2 Variation 4
32 Module_5.PM_STATUS Class_1 Variation 2 Variation 4
33 Module_6.MOD_TYPE None Variation 2 Variation 4
34 Module_6.MOD_MODE Class_3 Variation 2 Variation 4
35 Module_6.PM_STATUS Class_1 Variation 2 Variation 4
36 Module_7.MOD_TYPE None Variation 2 Variation 4
37 Module_7.MOD_MODE Class_3 Variation 2 Variation 4
38 Module_7.PM_STATUS Class_1 Variation 2 Variation 4
39 Module_8.MOD_TYPE None Variation 2 Variation 4
40 Module_8.MOD_MODE Class_3 Variation 2 Variation 4
41 Module_8.PM_STATUS Class_1 Variation 2 Variation 4
DNP3 Data Point List 29
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
42 DP Mtr_1.DP_INUSE Class_2 Variation 6 Variation 8
43 DP Mtr_1.PF_INUSE Class_2 Variation 6 Variation 8
44 DP Mtr_1.TF_INUSE Class_2 Variation 6 Variation 8
45 DP Mtr_1.IV_SEL Class_3 Variation 6 Variation 8
46 DP Mtr_1.IMV_SEL Class_3 Variation 6 Variation 8
47 DP Mtr_1.SVOL_RATE Class_2 Variation 6 Variation 8
48 DP Mtr_1.MASS_RATE Class_2 Variation 6 Variation 8
49 DP Mtr_1.ENERGY_RATE Class_2 Variation 6 Variation 8
50 DP Mtr_2.DP_INUSE Class_2 Variation 6 Variation 8
51 DP Mtr_2.PF_INUSE Class_2 Variation 6 Variation 8
52 DP Mtr_2.TF_INUSE Class_2 Variation 6 Variation 8
53 DP Mtr_2.IV_SEL Class_3 Variation 6 Variation 8
54 DP Mtr_2.IMV_SEL Class_3 Variation 6 Variation 8
55 DP Mtr_2.SVOL_RATE Class_2 Variation 6 Variation 8
56 DP Mtr_2.MASS_RATE Class_2 Variation 6 Variation 8
57 DP Mtr_2.ENERGY_RATE Class_2 Variation 6 Variation 8
58 DP Mtr_3.DP_INUSE Class_2 Variation 6 Variation 8
59 DP Mtr_3.PF_INUSE Class_2 Variation 6 Variation 8
60 DP Mtr_3.TF_INUSE Class_2 Variation 6 Variation 8
61 DP Mtr_3.IV_SEL Class_3 Variation 6 Variation 8
62 DP Mtr_3.IMV_SEL Class_3 Variation 6 Variation 8
63 DP Mtr_3.SVOL_RATE Class_2 Variation 6 Variation 8
64 DP Mtr_3.MASS_RATE Class_2 Variation 6 Variation 8
65 DP Mtr_3.ENERGY_RATE Class_2 Variation 6 Variation 8
66 DP Mtr_4.DP_INUSE Class_2 Variation 6 Variation 8
67 DP Mtr_4.PF_INUSE Class_2 Variation 6 Variation 8
68 DP Mtr_4.TF_INUSE Class_2 Variation 6 Variation 8
69 DP Mtr_4.IV_SEL Class_3 Variation 6 Variation 8
70 DP Mtr_4.IMV_SEL Class_3 Variation 6 Variation 8
71 DP Mtr_4.SVOL_RATE Class_2 Variation 6 Variation 8
72 DP Mtr_4.MASS_RATE Class_2 Variation 6 Variation 8
30 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
73 DP Mtr_4.ENERGY_RATE Class_2 Variation 6 Variation 8
74 DP Mtr_5.DP_INUSE Class_2 Variation 6 Variation 8
75 DP Mtr_5.PF_INUSE Class_2 Variation 6 Variation 8
76 DP Mtr_5.TF_INUSE Class_2 Variation 6 Variation 8
77 DP Mtr_5.IV_SEL Class_3 Variation 6 Variation 8
78 DP Mtr_5.IMV_SEL Class_3 Variation 6 Variation 8
79 DP Mtr_5.SVOL_RATE Class_2 Variation 6 Variation 8
80 DP Mtr_5.MASS_RATE Class_2 Variation 6 Variation 8
81 DP Mtr_5.ENERGY_RATE Class_2 Variation 6 Variation 8
82 DP Mtr_6.DP_INUSE Class_2 Variation 6 Variation 8
83 DP Mtr_6.PF_INUSE Class_2 Variation 6 Variation 8
84 DP Mtr_6.TF_INUSE Class_2 Variation 6 Variation 8
85 DP Mtr_6.IV_SEL Class_3 Variation 6 Variation 8
86 DP Mtr_6.IMV_SEL Class_3 Variation 6 Variation 8
87 DP Mtr_6.SVOL_RATE Class_2 Variation 6 Variation 8
88 DP Mtr_6.MASS_RATE Class_2 Variation 6 Variation 8
89 DP Mtr_6.ENERGY_RATE Class_2 Variation 6 Variation 8
90 DP Mtr_7.DP_INUSE Class_2 Variation 6 Variation 8
91 DP Mtr_7.PF_INUSE Class_2 Variation 6 Variation 8
92 DP Mtr_7.TF_INUSE Class_2 Variation 6 Variation 8
93 DP Mtr_7.IV_SEL Class_3 Variation 6 Variation 8
94 DP Mtr_7.IMV_SEL Class_3 Variation 6 Variation 8
95 DP Mtr_7.SVOL_RATE Class_2 Variation 6 Variation 8
96 DP Mtr_7.MASS_RATE Class_2 Variation 6 Variation 8
97 DP Mtr_7.ENERGY_RATE Class_2 Variation 6 Variation 8
98 DP Mtr_8.DP_INUSE Class_2 Variation 6 Variation 8
99 DP Mtr_8.PF_INUSE Class_2 Variation 6 Variation 8
100 DP Mtr_8.TF_INUSE Class_2 Variation 6 Variation 8
101 DP Mtr_8.IV_SEL Class_3 Variation 6 Variation 8
102 DP Mtr_8.IMV_SEL Class_3 Variation 6 Variation 8
103 DP Mtr_8.SVOL_RATE Class_2 Variation 6 Variation 8
DNP3 Data Point List 31
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
104 DP Mtr_8.MASS_RATE Class_2 Variation 6 Variation 8
105 DP Mtr_8.ENERGY_RATE Class_2 Variation 6 Variation 8
106 DP Mtr_9.DP_INUSE Class_2 Variation 6 Variation 8
107 DP Mtr_9.PF_INUSE Class_2 Variation 6 Variation 8
108 DP Mtr_9.TF_INUSE Class_2 Variation 6 Variation 8
109 DP Mtr_9.IV_SEL Class_3 Variation 6 Variation 8
110 DP Mtr_9.IMV_SEL Class_3 Variation 6 Variation 8
111 DP Mtr_9.SVOL_RATE Class_2 Variation 6 Variation 8
112 DP Mtr_9.MASS_RATE Class_2 Variation 6 Variation 8
113 DP Mtr_9.ENERGY_RATE Class_2 Variation 6 Variation 8
114 DP Mtr_10.DP_INUSE Class_2 Variation 6 Variation 8
115 DP Mtr_10.PF_INUSE Class_2 Variation 6 Variation 8
116 DP Mtr_10.TF_INUSE Class_2 Variation 6 Variation 8
117 DP Mtr_10.IV_SEL Class_3 Variation 6 Variation 8
118 DP Mtr_10.IMV_SEL Class_3 Variation 6 Variation 8
119 DP Mtr_10.SVOL_RATE Class_2 Variation 6 Variation 8
120 DP Mtr_10.MASS_RATE Class_2 Variation 6 Variation 8
121 DP Mtr_10.ENERGY_RATE Class_2 Variation 6 Variation 8
122 DP Mtr_11.DP_INUSE Class_2 Variation 6 Variation 8
123 DP Mtr_11.PF_INUSE Class_2 Variation 6 Variation 8
124 DP Mtr_11.TF_INUSE Class_2 Variation 6 Variation 8
125 DP Mtr_11.IV_SEL Class_3 Variation 6 Variation 8
126 DP Mtr_11.IMV_SEL Class_3 Variation 6 Variation 8
127 DP Mtr_11.SVOL_RATE Class_2 Variation 6 Variation 8
128 DP Mtr_11.MASS_RATE Class_2 Variation 6 Variation 8
129 DP Mtr_11.ENERGY_RATE Class_2 Variation 6 Variation 8
130 DP Mtr_12.DP_INUSE Class_2 Variation 6 Variation 8
131 DP Mtr_12.PF_INUSE Class_2 Variation 6 Variation 8
132 DP Mtr_12.TF_INUSE Class_2 Variation 6 Variation 8
133 DP Mtr_12.IV_SEL Class_3 Variation 6 Variation 8
134 DP Mtr_12.IMV_SEL Class_3 Variation 6 Variation 8
135 DP Mtr_12.SVOL_RATE Class_2 Variation 6 Variation 8
32 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
136 DP Mtr_12.MASS_RATE Class_2 Variation 6 Variation 8
137 DP Mtr_12.ENERGY_RATE Class_2 Variation 6 Variation 8
138 DP Mtr_13.DP_INUSE Class_2 Variation 6 Variation 8
139 DP Mtr_13.PF_INUSE Class_2 Variation 6 Variation 8
140 DP Mtr_13.TF_INUSE Class_2 Variation 6 Variation 8
141 DP Mtr_13.IV_SEL Class_3 Variation 6 Variation 8
142 DP Mtr_13.IMV_SEL Class_3 Variation 6 Variation 8
143 DP Mtr_13.SVOL_RATE Class_2 Variation 6 Variation 8
144 DP Mtr_13.MASS_RATE Class_2 Variation 6 Variation 8
145 DP Mtr_13.ENERGY_RATE Class_2 Variation 6 Variation 8
146 DP Mtr_14.DP_INUSE Class_2 Variation 6 Variation 8
147 DP Mtr_14.PF_INUSE Class_2 Variation 6 Variation 8
148 DP Mtr_14.TF_INUSE Class_2 Variation 6 Variation 8
149 DP Mtr_14.IV_SEL Class_3 Variation 6 Variation 8
150 DP Mtr_14.IMV_SEL Class_3 Variation 6 Variation 8
151 DP Mtr_14.SVOL_RATE Class_2 Variation 6 Variation 8
152 DP Mtr_14.MASS_RATE Class_2 Variation 6 Variation 8
153 DP Mtr_14.ENERGY_RATE Class_2 Variation 6 Variation 8
154 DP Mtr_15.DP_INUSE Class_2 Variation 6 Variation 8
155 DP Mtr_15.PF_INUSE Class_2 Variation 6 Variation 8
156 DP Mtr_15.TF_INUSE Class_2 Variation 6 Variation 8
157 DP Mtr_15.IV_SEL Class_3 Variation 6 Variation 8
158 DP Mtr_15.IMV_SEL Class_3 Variation 6 Variation 8
159 DP Mtr_15.SVOL_RATE Class_2 Variation 6 Variation 8
160 DP Mtr_15.MASS_RATE Class_2 Variation 6 Variation 8
161 DP Mtr_15.ENERGY_RATE Class_2 Variation 6 Variation 8
162 DP Mtr_16.DP_INUSE Class_2 Variation 6 Variation 8
163 DP Mtr_16.PF_INUSE Class_2 Variation 6 Variation 8
164 DP Mtr_16.TF_INUSE Class_2 Variation 6 Variation 8
165 DP Mtr_16.IV_SEL Class_3 Variation 6 Variation 8
166 DP Mtr_16.IMV_SEL Class_3 Variation 6 Variation 8
167 DP Mtr_16.SVOL_RATE Class_2 Variation 6 Variation 8
DNP3 Data Point List 33
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
168 DP Mtr_16.MASS_RATE Class_2 Variation 6 Variation 8
169 DP Mtr_16.ENERGY_RATE Class_2 Variation 6 Variation 8
170 DP Mtr_17.DP_INUSE Class_2 Variation 6 Variation 8
171 DP Mtr_17.PF_INUSE Class_2 Variation 6 Variation 8
172 DP Mtr_17.TF_INUSE Class_2 Variation 6 Variation 8
173 DP Mtr_17.IV_SEL Class_3 Variation 6 Variation 8
174 DP Mtr_17.IMV_SEL Class_3 Variation 6 Variation 8
175 DP Mtr_17.SVOL_RATE Class_2 Variation 6 Variation 8
176 DP Mtr_17.MASS_RATE Class_2 Variation 6 Variation 8
177 DP Mtr_17.ENERGY_RATE Class_2 Variation 6 Variation 8
178 DP Mtr_18.DP_INUSE Class_2 Variation 6 Variation 8
179 DP Mtr_18.PF_INUSE Class_2 Variation 6 Variation 8
180 DP Mtr_18.TF_INUSE Class_2 Variation 6 Variation 8
181 DP Mtr_18.IV_SEL Class_3 Variation 6 Variation 8
182 DP Mtr_18.IMV_SEL Class_3 Variation 6 Variation 8
183 DP Mtr_18.SVOL_RATE Class_2 Variation 6 Variation 8
184 DP Mtr_18.MASS_RATE Class_2 Variation 6 Variation 8
185 DP Mtr_18.ENERGY_RATE Class_2 Variation 6 Variation 8
186 DP Mtr_19.DP_INUSE Class_2 Variation 6 Variation 8
187 DP Mtr_19.PF_INUSE Class_2 Variation 6 Variation 8
188 DP Mtr_19.TF_INUSE Class_2 Variation 6 Variation 8
189 DP Mtr_19.IV_SEL Class_3 Variation 6 Variation 8
190 DP Mtr_19.IMV_SEL Class_3 Variation 6 Variation 8
191 DP Mtr_19.SVOL_RATE Class_2 Variation 6 Variation 8
192 DP Mtr_19.MASS_RATE Class_2 Variation 6 Variation 8
193 DP Mtr_19.ENERGY_RATE Class_2 Variation 6 Variation 8
194 DP Mtr_20.DP_INUSE Class_2 Variation 6 Variation 8
195 DP Mtr_20.PF_INUSE Class_2 Variation 6 Variation 8
196 DP Mtr_20.TF_INUSE Class_2 Variation 6 Variation 8
197 DP Mtr_20.IV_SEL Class_3 Variation 6 Variation 8
198 DP Mtr_20.IMV_SEL Class_3 Variation 6 Variation 8
199 DP Mtr_20.SVOL_RATE Class_2 Variation 6 Variation 8
34 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
200 DP Mtr_20.MASS_RATE Class_2 Variation 6 Variation 8
201 DP Mtr_20.ENERGY_RATE Class_2 Variation 6 Variation 8
202 DP Mtr_21.DP_INUSE Class_2 Variation 6 Variation 8
203 DP Mtr_21.PF_INUSE Class_2 Variation 6 Variation 8
204 DP Mtr_21.TF_INUSE Class_2 Variation 6 Variation 8
205 DP Mtr_21.IV_SEL Class_3 Variation 6 Variation 8
206 DP Mtr_21.IMV_SEL Class_3 Variation 6 Variation 8
207 DP Mtr_21.SVOL_RATE Class_2 Variation 6 Variation 8
208 DP Mtr_21.MASS_RATE Class_2 Variation 6 Variation 8
209 DP Mtr_21.ENERGY_RATE Class_2 Variation 6 Variation 8
210 DP Mtr_22.DP_INUSE Class_2 Variation 6 Variation 8
211 DP Mtr_22.PF_INUSE Class_2 Variation 6 Variation 8
212 DP Mtr_22.TF_INUSE Class_2 Variation 6 Variation 8
213 DP Mtr_22.IV_SEL Class_3 Variation 6 Variation 8
214 DP Mtr_22.IMV_SEL Class_3 Variation 6 Variation 8
215 DP Mtr_22.SVOL_RATE Class_2 Variation 6 Variation 8
216 DP Mtr_22.MASS_RATE Class_2 Variation 6 Variation 8
217 DP Mtr_22.ENERGY_RATE Class_2 Variation 6 Variation 8
218 DP Mtr_23.DP_INUSE Class_2 Variation 6 Variation 8
219 DP Mtr_23.PF_INUSE Class_2 Variation 6 Variation 8
220 DP Mtr_23.TF_INUSE Class_2 Variation 6 Variation 8
221 DP Mtr_23.IV_SEL Class_3 Variation 6 Variation 8
222 DP Mtr_23.IMV_SEL Class_3 Variation 6 Variation 8
223 DP Mtr_23.SVOL_RATE Class_2 Variation 6 Variation 8
224 DP Mtr_23.MASS_RATE Class_2 Variation 6 Variation 8
225 DP Mtr_23.ENERGY_RATE Class_2 Variation 6 Variation 8
226 DP Mtr_24.DP_INUSE Class_2 Variation 6 Variation 8
227 DP Mtr_24.PF_INUSE Class_2 Variation 6 Variation 8
228 DP Mtr_24.TF_INUSE Class_2 Variation 6 Variation 8
229 DP Mtr_24.IV_SEL Class_3 Variation 6 Variation 8
230 DP Mtr_24.IMV_SEL Class_3 Variation 6 Variation 8
231 DP Mtr_24.SVOL_RATE Class_2 Variation 6 Variation 8
DNP3 Data Point List 35
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
232 DP Mtr_24.MASS_RATE Class_2 Variation 6 Variation 8
233 DP Mtr_24.ENERGY_RATE Class_2 Variation 6 Variation 8
234 Linear Mtr_1.IQ_RATE Class_2 Variation 6 Variation 8
235 Linear Mtr_1.PF_INUSE Class_2 Variation 6 Variation 8
236 Linear Mtr_1.TF_INUSE Class_2 Variation 6 Variation 8
237 Linear Mtr_1.IMV_SEL Class_3 Variation 6 Variation 8
238 Linear Mtr_1.KF_SEL Class_3 Variation 6 Variation 8
239 Linear Mtr_1.MF_SEL Class_3 Variation 6 Variation 8
240 Linear Mtr_1.UVOL_RATE Class_2 Variation 6 Variation 8
241 Linear Mtr_1.SVOL_RATE Class_2 Variation 6 Variation 8
242 Linear Mtr_1.MASS_RATE Class_2 Variation 6 Variation 8
243 Linear Mtr_1.ENERGY_RATE Class_2 Variation 6 Variation 8
244 Linear Mtr_2.IQ_RATE Class_2 Variation 6 Variation 8
245 Linear Mtr_2.PF_INUSE Class_2 Variation 6 Variation 8
246 Linear Mtr_2.TF_INUSE Class_2 Variation 6 Variation 8
247 Linear Mtr_2.IMV_SEL Class_3 Variation 6 Variation 8
248 Linear Mtr_2.KF_SEL Class_3 Variation 6 Variation 8
249 Linear Mtr_2.MF_SEL Class_3 Variation 6 Variation 8
250 Linear Mtr_2.UVOL_RATE Class_2 Variation 6 Variation 8
251 Linear Mtr_2.SVOL_RATE Class_2 Variation 6 Variation 8
252 Linear Mtr_2.MASS_RATE Class_2 Variation 6 Variation 8
253 Linear Mtr_2.ENERGY_RATE Class_2 Variation 6 Variation 8
254 Linear Mtr_3.IQ_RATE Class_2 Variation 6 Variation 8
255 Linear Mtr_3.PF_INUSE Class_2 Variation 6 Variation 8
256 Linear Mtr_3.TF_INUSE Class_2 Variation 6 Variation 8
257 Linear Mtr_3.IMV_SEL Class_3 Variation 6 Variation 8
258 Linear Mtr_3.KF_SEL Class_3 Variation 6 Variation 8
259 Linear Mtr_3.MF_SEL Class_3 Variation 6 Variation 8
260 Linear Mtr_3.UVOL_RATE Class_2 Variation 6 Variation 8
261 Linear Mtr_3.SVOL_RATE Class_2 Variation 6 Variation 8
262 Linear Mtr_3.MASS_RATE Class_2 Variation 6 Variation 8
263 Linear Mtr_3.ENERGY_RATE Class_2 Variation 6 Variation 8
36 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
264 Linear Mtr_4.IQ_RATE Class_2 Variation 6 Variation 8
265 Linear Mtr_4.PF_INUSE Class_2 Variation 6 Variation 8
266 Linear Mtr_4.TF_INUSE Class_2 Variation 6 Variation 8
267 Linear Mtr_4.IMV_SEL Class_3 Variation 6 Variation 8
268 Linear Mtr_4.KF_SEL Class_3 Variation 6 Variation 8
269 Linear Mtr_4.MF_SEL Class_3 Variation 6 Variation 8
270 Linear Mtr_4.UVOL_RATE Class_2 Variation 6 Variation 8
271 Linear Mtr_4.SVOL_RATE Class_2 Variation 6 Variation 8
272 Linear Mtr_4.MASS_RATE Class_2 Variation 6 Variation 8
273 Linear Mtr_4.ENERGY_RATE Class_2 Variation 6 Variation 8
274 Linear Mtr_5.IQ_RATE Class_2 Variation 6 Variation 8
275 Linear Mtr_5.PF_INUSE Class_2 Variation 6 Variation 8
276 Linear Mtr_5.TF_INUSE Class_2 Variation 6 Variation 8
277 Linear Mtr_5.IMV_SEL Class_3 Variation 6 Variation 8
278 Linear Mtr_5.KF_SEL Class_3 Variation 6 Variation 8
279 Linear Mtr_5.MF_SEL Class_3 Variation 6 Variation 8
280 Linear Mtr_5.UVOL_RATE Class_2 Variation 6 Variation 8
281 Linear Mtr_5.SVOL_RATE Class_2 Variation 6 Variation 8
282 Linear Mtr_5.MASS_RATE Class_2 Variation 6 Variation 8
283 Linear Mtr_5.ENERGY_RATE Class_2 Variation 6 Variation 8
284 Linear Mtr_6.IQ_RATE Class_2 Variation 6 Variation 8
285 Linear Mtr_6.PF_INUSE Class_2 Variation 6 Variation 8
286 Linear Mtr_6.TF_INUSE Class_2 Variation 6 Variation 8
287 Linear Mtr_6.IMV_SEL Class_3 Variation 6 Variation 8
288 Linear Mtr_6.KF_SEL Class_3 Variation 6 Variation 8
289 Linear Mtr_6.MF_SEL Class_3 Variation 6 Variation 8
290 Linear Mtr_6.UVOL_RATE Class_2 Variation 6 Variation 8
291 Linear Mtr_6.SVOL_RATE Class_2 Variation 6 Variation 8
292 Linear Mtr_6.MASS_RATE Class_2 Variation 6 Variation 8
293 Linear Mtr_6.ENERGY_RATE Class_2 Variation 6 Variation 8
294 Linear Mtr_7.IQ_RATE Class_2 Variation 6 Variation 8
295 Linear Mtr_7.PF_INUSE Class_2 Variation 6 Variation 8
DNP3 Data Point List 37
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
296 Linear Mtr_7.TF_INUSE Class_2 Variation 6 Variation 8
297 Linear Mtr_7.IMV_SEL Class_3 Variation 6 Variation 8
298 Linear Mtr_7.KF_SEL Class_3 Variation 6 Variation 8
299 Linear Mtr_7.MF_SEL Class_3 Variation 6 Variation 8
300 Linear Mtr_7.UVOL_RATE Class_2 Variation 6 Variation 8
301 Linear Mtr_7.SVOL_RATE Class_2 Variation 6 Variation 8
302 Linear Mtr_7.MASS_RATE Class_2 Variation 6 Variation 8
303 Linear Mtr_7.ENERGY_RATE Class_2 Variation 6 Variation 8
304 Linear Mtr_8.IQ_RATE Class_2 Variation 6 Variation 8
305 Linear Mtr_8.PF_INUSE Class_2 Variation 6 Variation 8
306 Linear Mtr_8.TF_INUSE Class_2 Variation 6 Variation 8
307 Linear Mtr_8.IMV_SEL Class_3 Variation 6 Variation 8
308 Linear Mtr_8.KF_SEL Class_3 Variation 6 Variation 8
309 Linear Mtr_8.MF_SEL Class_3 Variation 6 Variation 8
310 Linear Mtr_8.UVOL_RATE Class_2 Variation 6 Variation 8
311 Linear Mtr_8.SVOL_RATE Class_2 Variation 6 Variation 8
312 Linear Mtr_8.MASS_RATE Class_2 Variation 6 Variation 8
313 Linear Mtr_8.ENERGY_RATE Class_2 Variation 6 Variation 8
314 Linear Mtr_9.IQ_RATE Class_2 Variation 6 Variation 8
315 Linear Mtr_9.PF_INUSE Class_2 Variation 6 Variation 8
316 Linear Mtr_9.TF_INUSE Class_2 Variation 6 Variation 8
317 Linear Mtr_9.IMV_SEL Class_3 Variation 6 Variation 8
318 Linear Mtr_9.KF_SEL Class_3 Variation 6 Variation 8
319 Linear Mtr_9.MF_SEL Class_3 Variation 6 Variation 8
320 Linear Mtr_9.UVOL_RATE Class_2 Variation 6 Variation 8
321 Linear Mtr_9.SVOL_RATE Class_2 Variation 6 Variation 8
322 Linear Mtr_9.MASS_RATE Class_2 Variation 6 Variation 8
323 Linear Mtr_9.ENERGY_RATE Class_2 Variation 6 Variation 8
324 Linear Mtr_10.IQ_RATE Class_2 Variation 6 Variation 8
325 Linear Mtr_10.PF_INUSE Class_2 Variation 6 Variation 8
326 Linear Mtr_10.TF_INUSE Class_2 Variation 6 Variation 8
327 Linear Mtr_10.IMV_SEL Class_3 Variation 6 Variation 8
38 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
328 Linear Mtr_10.KF_SEL Class_3 Variation 6 Variation 8
329 Linear Mtr_10.MF_SEL Class_3 Variation 6 Variation 8
330 Linear Mtr_10.UVOL_RATE Class_2 Variation 6 Variation 8
331 Linear Mtr_10.SVOL_RATE Class_2 Variation 6 Variation 8
332 Linear Mtr_10.MASS_RATE Class_2 Variation 6 Variation 8
333 Linear Mtr_10.ENERGY_RATE Class_2 Variation 6 Variation 8
334 Linear Mtr_11.IQ_RATE Class_2 Variation 6 Variation 8
335 Linear Mtr_11.PF_INUSE Class_2 Variation 6 Variation 8
336 Linear Mtr_11.TF_INUSE Class_2 Variation 6 Variation 8
337 Linear Mtr_11.IMV_SEL Class_3 Variation 6 Variation 8
338 Linear Mtr_11.KF_SEL Class_3 Variation 6 Variation 8
339 Linear Mtr_11.MF_SEL Class_3 Variation 6 Variation 8
340 Linear Mtr_11.UVOL_RATE Class_2 Variation 6 Variation 8
341 Linear Mtr_11.SVOL_RATE Class_2 Variation 6 Variation 8
342 Linear Mtr_11.MASS_RATE Class_2 Variation 6 Variation 8
343 Linear Mtr_11.ENERGY_RATE Class_2 Variation 6 Variation 8
344 Linear Mtr_12.IQ_RATE Class_2 Variation 6 Variation 8
345 Linear Mtr_12.PF_INUSE Class_2 Variation 6 Variation 8
346 Linear Mtr_12.TF_INUSE Class_2 Variation 6 Variation 8
347 Linear Mtr_12.IMV_SEL Class_3 Variation 6 Variation 8
348 Linear Mtr_12.KF_SEL Class_3 Variation 6 Variation 8
349 Linear Mtr_12.MF_SEL Class_3 Variation 6 Variation 8
350 Linear Mtr_12.UVOL_RATE Class_2 Variation 6 Variation 8
351 Linear Mtr_12.SVOL_RATE Class_2 Variation 6 Variation 8
352 Linear Mtr_12.MASS_RATE Class_2 Variation 6 Variation 8
353 Linear Mtr_12.ENERGY_RATE Class_2 Variation 6 Variation 8
354 Linear Mtr_13.IQ_RATE Class_2 Variation 6 Variation 8
355 Linear Mtr_13.PF_INUSE Class_2 Variation 6 Variation 8
356 Linear Mtr_13.TF_INUSE Class_2 Variation 6 Variation 8
357 Linear Mtr_13.IMV_SEL Class_3 Variation 6 Variation 8
358 Linear Mtr_13.KF_SEL Class_3 Variation 6 Variation 8
359 Linear Mtr_13.MF_SEL Class_3 Variation 6 Variation 8
DNP3 Data Point List 39
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
360 Linear Mtr_13.UVOL_RATE Class_2 Variation 6 Variation 8
361 Linear Mtr_13.SVOL_RATE Class_2 Variation 6 Variation 8
362 Linear Mtr_13.MASS_RATE Class_2 Variation 6 Variation 8
363 Linear Mtr_13.ENERGY_RATE Class_2 Variation 6 Variation 8
364 Linear Mtr_14.IQ_RATE Class_2 Variation 6 Variation 8
365 Linear Mtr_14.PF_INUSE Class_2 Variation 6 Variation 8
366 Linear Mtr_14.TF_INUSE Class_2 Variation 6 Variation 8
367 Linear Mtr_14.IMV_SEL Class_3 Variation 6 Variation 8
368 Linear Mtr_14.KF_SEL Class_3 Variation 6 Variation 8
369 Linear Mtr_14.MF_SEL Class_3 Variation 6 Variation 8
370 Linear Mtr_14.UVOL_RATE Class_2 Variation 6 Variation 8
371 Linear Mtr_14.SVOL_RATE Class_2 Variation 6 Variation 8
372 Linear Mtr_14.MASS_RATE Class_2 Variation 6 Variation 8
373 Linear Mtr_14.ENERGY_RATE Class_2 Variation 6 Variation 8
374 Linear Mtr_15.IQ_RATE Class_2 Variation 6 Variation 8
375 Linear Mtr_15.PF_INUSE Class_2 Variation 6 Variation 8
376 Linear Mtr_15.TF_INUSE Class_2 Variation 6 Variation 8
377 Linear Mtr_15.IMV_SEL Class_3 Variation 6 Variation 8
378 Linear Mtr_15.KF_SEL Class_3 Variation 6 Variation 8
379 Linear Mtr_15.MF_SEL Class_3 Variation 6 Variation 8
380 Linear Mtr_15.UVOL_RATE Class_2 Variation 6 Variation 8
381 Linear Mtr_15.SVOL_RATE Class_2 Variation 6 Variation 8
382 Linear Mtr_15.MASS_RATE Class_2 Variation 6 Variation 8
383 Linear Mtr_15.ENERGY_RATE Class_2 Variation 6 Variation 8
384 Linear Mtr_16.IQ_RATE Class_2 Variation 6 Variation 8
385 Linear Mtr_16.PF_INUSE Class_2 Variation 6 Variation 8
386 Linear Mtr_16.TF_INUSE Class_2 Variation 6 Variation 8
387 Linear Mtr_16.IMV_SEL Class_3 Variation 6 Variation 8
388 Linear Mtr_16.KF_SEL Class_3 Variation 6 Variation 8
389 Linear Mtr_16.MF_SEL Class_3 Variation 6 Variation 8
390 Linear Mtr_16.UVOL_RATE Class_2 Variation 6 Variation 8
391 Linear Mtr_16.SVOL_RATE Class_2 Variation 6 Variation 8
40 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
392 Linear Mtr_16.MASS_RATE Class_2 Variation 6 Variation 8
393 Linear Mtr_16.ENERGY_RATE Class_2 Variation 6 Variation 8
394 Linear Mtr_17.IQ_RATE Class_2 Variation 6 Variation 8
395 Linear Mtr_17.PF_INUSE Class_2 Variation 6 Variation 8
396 Linear Mtr_17.TF_INUSE Class_2 Variation 6 Variation 8
397 Linear Mtr_17.IMV_SEL Class_3 Variation 6 Variation 8
398 Linear Mtr_17.KF_SEL Class_3 Variation 6 Variation 8
399 Linear Mtr_17.MF_SEL Class_3 Variation 6 Variation 8
400 Linear Mtr_17.UVOL_RATE Class_2 Variation 6 Variation 8
401 Linear Mtr_17.SVOL_RATE Class_2 Variation 6 Variation 8
402 Linear Mtr_17.MASS_RATE Class_2 Variation 6 Variation 8
403 Linear Mtr_17.ENERGY_RATE Class_2 Variation 6 Variation 8
404 Linear Mtr_18.IQ_RATE Class_2 Variation 6 Variation 8
405 Linear Mtr_18.PF_INUSE Class_2 Variation 6 Variation 8
406 Linear Mtr_18.TF_INUSE Class_2 Variation 6 Variation 8
407 Linear Mtr_18.IMV_SEL Class_3 Variation 6 Variation 8
408 Linear Mtr_18.KF_SEL Class_3 Variation 6 Variation 8
409 Linear Mtr_18.MF_SEL Class_3 Variation 6 Variation 8
410 Linear Mtr_18.UVOL_RATE Class_2 Variation 6 Variation 8
411 Linear Mtr_18.SVOL_RATE Class_2 Variation 6 Variation 8
412 Linear Mtr_18.MASS_RATE Class_2 Variation 6 Variation 8
413 Linear Mtr_18.ENERGY_RATE Class_2 Variation 6 Variation 8
414 Linear Mtr_19.IQ_RATE Class_2 Variation 6 Variation 8
415 Linear Mtr_19.PF_INUSE Class_2 Variation 6 Variation 8
416 Linear Mtr_19.TF_INUSE Class_2 Variation 6 Variation 8
417 Linear Mtr_19.IMV_SEL Class_3 Variation 6 Variation 8
418 Linear Mtr_19.KF_SEL Class_3 Variation 6 Variation 8
419 Linear Mtr_19.MF_SEL Class_3 Variation 6 Variation 8
420 Linear Mtr_19.UVOL_RATE Class_2 Variation 6 Variation 8
421 Linear Mtr_19.SVOL_RATE Class_2 Variation 6 Variation 8
422 Linear Mtr_19.MASS_RATE Class_2 Variation 6 Variation 8
423 Linear Mtr_19.ENERGY_RATE Class_2 Variation 6 Variation 8
DNP3 Data Point List 41
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
424 Linear Mtr_20.IQ_RATE Class_2 Variation 6 Variation 8
425 Linear Mtr_20.PF_INUSE Class_2 Variation 6 Variation 8
426 Linear Mtr_20.TF_INUSE Class_2 Variation 6 Variation 8
427 Linear Mtr_20.IMV_SEL Class_3 Variation 6 Variation 8
428 Linear Mtr_20.KF_SEL Class_3 Variation 6 Variation 8
429 Linear Mtr_20.MF_SEL Class_3 Variation 6 Variation 8
430 Linear Mtr_20.UVOL_RATE Class_2 Variation 6 Variation 8
431 Linear Mtr_20.SVOL_RATE Class_2 Variation 6 Variation 8
432 Linear Mtr_20.MASS_RATE Class_2 Variation 6 Variation 8
433 Linear Mtr_20.ENERGY_RATE Class_2 Variation 6 Variation 8
434 Linear Mtr_21.IQ_RATE Class_2 Variation 6 Variation 8
435 Linear Mtr_21.PF_INUSE Class_2 Variation 6 Variation 8
436 Linear Mtr_21.TF_INUSE Class_2 Variation 6 Variation 8
437 Linear Mtr_21.IMV_SEL Class_3 Variation 6 Variation 8
438 Linear Mtr_21.KF_SEL Class_3 Variation 6 Variation 8
439 Linear Mtr_21.MF_SEL Class_3 Variation 6 Variation 8
440 Linear Mtr_21.UVOL_RATE Class_2 Variation 6 Variation 8
441 Linear Mtr_21.SVOL_RATE Class_2 Variation 6 Variation 8
442 Linear Mtr_21.MASS_RATE Class_2 Variation 6 Variation 8
443 Linear Mtr_21.ENERGY_RATE Class_2 Variation 6 Variation 8
444 Linear Mtr_22.IQ_RATE Class_2 Variation 6 Variation 8
445 Linear Mtr_22.PF_INUSE Class_2 Variation 6 Variation 8
446 Linear Mtr_22.TF_INUSE Class_2 Variation 6 Variation 8
447 Linear Mtr_22.IMV_SEL Class_3 Variation 6 Variation 8
448 Linear Mtr_22.KF_SEL Class_3 Variation 6 Variation 8
449 Linear Mtr_22.MF_SEL Class_3 Variation 6 Variation 8
450 Linear Mtr_22.UVOL_RATE Class_2 Variation 6 Variation 8
451 Linear Mtr_22.SVOL_RATE Class_2 Variation 6 Variation 8
452 Linear Mtr_22.MASS_RATE Class_2 Variation 6 Variation 8
453 Linear Mtr_22.ENERGY_RATE Class_2 Variation 6 Variation 8
454 Linear Mtr_23.IQ_RATE Class_2 Variation 6 Variation 8
455 Linear Mtr_23.PF_INUSE Class_2 Variation 6 Variation 8
42 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
456 Linear Mtr_23.TF_INUSE Class_2 Variation 6 Variation 8
457 Linear Mtr_23.IMV_SEL Class_3 Variation 6 Variation 8
458 Linear Mtr_23.KF_SEL Class_3 Variation 6 Variation 8
459 Linear Mtr_23.MF_SEL Class_3 Variation 6 Variation 8
460 Linear Mtr_23.UVOL_RATE Class_2 Variation 6 Variation 8
461 Linear Mtr_23.SVOL_RATE Class_2 Variation 6 Variation 8
462 Linear Mtr_23.MASS_RATE Class_2 Variation 6 Variation 8
463 Linear Mtr_23.ENERGY_RATE Class_2 Variation 6 Variation 8
464 Linear Mtr_24.IQ_RATE Class_2 Variation 6 Variation 8
465 Linear Mtr_24.PF_INUSE Class_2 Variation 6 Variation 8
466 Linear Mtr_24.TF_INUSE Class_2 Variation 6 Variation 8
467 Linear Mtr_24.IMV_SEL Class_3 Variation 6 Variation 8
468 Linear Mtr_24.KF_SEL Class_3 Variation 6 Variation 8
469 Linear Mtr_24.MF_SEL Class_3 Variation 6 Variation 8
470 Linear Mtr_24.UVOL_RATE Class_2 Variation 6 Variation 8
471 Linear Mtr_24.SVOL_RATE Class_2 Variation 6 Variation 8
472 Linear Mtr_24.MASS_RATE Class_2 Variation 6 Variation 8
473 Linear Mtr_24.ENERGY_RATE Class_2 Variation 6 Variation 8
474 Liq LinMtr_1.IQ_RATE Class_2 Variation 6 Variation 8
475 Liq LinMtr_1.PF_INUSE Class_2 Variation 6 Variation 8
476 Liq LinMtr_1.TF_INUSE Class_2 Variation 6 Variation 8
477 Liq LinMtr_1.KF_SEL Class_3 Variation 6 Variation 8
478 Liq LinMtr_1.MF_SEL Class_3 Variation 6 Variation 8
479 Liq LinMtr_1.FLUID_PROP_OBJ.SF_SEL Class_3 Variation 6 Variation 8
480 Liq LinMtr_1.FLUID_PROP_OBJ.WC_SEL Class_3 Variation 6 Variation 8
481 Liq LinMtr_1.GVOL_RATE Class_2 Variation 6 Variation 8
482 Liq LinMtr_1.UVOL_O_RATE Class_2 Variation 6 Variation 8
483 Liq LinMtr_1.SVOL_O_RATE Class_2 Variation 6 Variation 8
484 Liq LinMtr_1.UVOL_W_RATE Class_2 Variation 6 Variation 8
485 Liq LinMtr_1.SVOL_W_RATE Class_2 Variation 6 Variation 8
486 Liq LinMtr_2.IQ_RATE Class_2 Variation 6 Variation 8
487 Liq LinMtr_2.PF_INUSE Class_2 Variation 6 Variation 8
DNP3 Data Point List 43
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
488 Liq LinMtr_2.TF_INUSE Class_2 Variation 6 Variation 8
489 Liq LinMtr_2.KF_SEL Class_3 Variation 6 Variation 8
490 Liq LinMtr_2.MF_SEL Class_3 Variation 6 Variation 8
491 Liq LinMtr_2.FLUID_PROP_OBJ.SF_SEL Class_3 Variation 6 Variation 8
492 Liq LinMtr_2.FLUID_PROP_OBJ.WC_SEL Class_3 Variation 6 Variation 8
493 Liq LinMtr_2.GVOL_RATE Class_2 Variation 6 Variation 8
494 Liq LinMtr_2.UVOL_O_RATE Class_2 Variation 6 Variation 8
495 Liq LinMtr_2.SVOL_O_RATE Class_2 Variation 6 Variation 8
496 Liq LinMtr_2.UVOL_W_RATE Class_2 Variation 6 Variation 8
497 Liq LinMtr_2.SVOL_W_RATE Class_2 Variation 6 Variation 8
498 Liq LinMtr_3.IQ_RATE Class_2 Variation 6 Variation 8
499 Liq LinMtr_3.PF_INUSE Class_2 Variation 6 Variation 8
500 Liq LinMtr_3.TF_INUSE Class_2 Variation 6 Variation 8
501 Liq LinMtr_3.KF_SEL Class_3 Variation 6 Variation 8
502 Liq LinMtr_3.MF_SEL Class_3 Variation 6 Variation 8
503 Liq LinMtr_3.FLUID_PROP_OBJ.SF_SEL Class_3 Variation 6 Variation 8
504 Liq LinMtr_3.FLUID_PROP_OBJ.WC_SEL Class_3 Variation 6 Variation 8
505 Liq LinMtr_3.GVOL_RATE Class_2 Variation 6 Variation 8
506 Liq LinMtr_3.UVOL_O_RATE Class_2 Variation 6 Variation 8
507 Liq LinMtr_3.SVOL_O_RATE Class_2 Variation 6 Variation 8
508 Liq LinMtr_3.UVOL_W_RATE Class_2 Variation 6 Variation 8
509 Liq LinMtr_3.SVOL_W_RATE Class_2 Variation 6 Variation 8
510 Liq LinMtr_4.IQ_RATE Class_2 Variation 6 Variation 8
511 Liq LinMtr_4.PF_INUSE Class_2 Variation 6 Variation 8
512 Liq LinMtr_4.TF_INUSE Class_2 Variation 6 Variation 8
513 Liq LinMtr_4.KF_SEL Class_3 Variation 6 Variation 8
514 Liq LinMtr_4.MF_SEL Class_3 Variation 6 Variation 8
515 Liq LinMtr_4.FLUID_PROP_OBJ.SF_SEL Class_3 Variation 6 Variation 8
516 Liq LinMtr_4.FLUID_PROP_OBJ.WC_SEL Class_3 Variation 6 Variation 8
517 Liq LinMtr_4.GVOL_RATE Class_2 Variation 6 Variation 8
518 Liq LinMtr_4.UVOL_O_RATE Class_2 Variation 6 Variation 8
519 Liq LinMtr_4.SVOL_O_RATE Class_2 Variation 6 Variation 8
44 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
520 Liq LinMtr_4.UVOL_W_RATE Class_2 Variation 6 Variation 8
521 Liq LinMtr_4.SVOL_W_RATE Class_2 Variation 6 Variation 8
522 Liq LinMtr_5.IQ_RATE Class_2 Variation 6 Variation 8
523 Liq LinMtr_5.PF_INUSE Class_2 Variation 6 Variation 8
524 Liq LinMtr_5.TF_INUSE Class_2 Variation 6 Variation 8
525 Liq LinMtr_5.KF_SEL Class_3 Variation 6 Variation 8
526 Liq LinMtr_5.MF_SEL Class_3 Variation 6 Variation 8
527 Liq LinMtr_5.FLUID_PROP_OBJ.SF_SEL Class_3 Variation 6 Variation 8
528 Liq LinMtr_5.FLUID_PROP_OBJ.WC_SEL Class_3 Variation 6 Variation 8
529 Liq LinMtr_5.GVOL_RATE Class_2 Variation 6 Variation 8
530 Liq LinMtr_5.UVOL_O_RATE Class_2 Variation 6 Variation 8
531 Liq LinMtr_5.SVOL_O_RATE Class_2 Variation 6 Variation 8
532 Liq LinMtr_5.UVOL_W_RATE Class_2 Variation 6 Variation 8
533 Liq LinMtr_5.SVOL_W_RATE Class_2 Variation 6 Variation 8
534 Liq LinMtr_6.IQ_RATE Class_2 Variation 6 Variation 8
535 Liq LinMtr_6.PF_INUSE Class_2 Variation 6 Variation 8
536 Liq LinMtr_6.TF_INUSE Class_2 Variation 6 Variation 8
537 Liq LinMtr_6.KF_SEL Class_3 Variation 6 Variation 8
538 Liq LinMtr_6.MF_SEL Class_3 Variation 6 Variation 8
539 Liq LinMtr_6.FLUID_PROP_OBJ.SF_SEL Class_3 Variation 6 Variation 8
540 Liq LinMtr_6.FLUID_PROP_OBJ.WC_SEL Class_3 Variation 6 Variation 8
541 Liq LinMtr_6.GVOL_RATE Class_2 Variation 6 Variation 8
542 Liq LinMtr_6.UVOL_O_RATE Class_2 Variation 6 Variation 8
543 Liq LinMtr_6.SVOL_O_RATE Class_2 Variation 6 Variation 8
544 Liq LinMtr_6.UVOL_W_RATE Class_2 Variation 6 Variation 8
545 Liq LinMtr_6.SVOL_W_RATE Class_2 Variation 6 Variation 8
546 Liq LinMtr_7.IQ_RATE Class_2 Variation 6 Variation 8
547 Liq LinMtr_7.PF_INUSE Class_2 Variation 6 Variation 8
548 Liq LinMtr_7.TF_INUSE Class_2 Variation 6 Variation 8
549 Liq LinMtr_7.KF_SEL Class_3 Variation 6 Variation 8
550 Liq LinMtr_7.MF_SEL Class_3 Variation 6 Variation 8
551 Liq LinMtr_7.FLUID_PROP_OBJ.SF_SEL Class_3 Variation 6 Variation 8
DNP3 Data Point List 45
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
552 Liq LinMtr_7.FLUID_PROP_OBJ.WC_SEL Class_3 Variation 6 Variation 8
553 Liq LinMtr_7.GVOL_RATE Class_2 Variation 6 Variation 8
554 Liq LinMtr_7.UVOL_O_RATE Class_2 Variation 6 Variation 8
555 Liq LinMtr_7.SVOL_O_RATE Class_2 Variation 6 Variation 8
556 Liq LinMtr_7.UVOL_W_RATE Class_2 Variation 6 Variation 8
557 Liq LinMtr_7.SVOL_W_RATE Class_2 Variation 6 Variation 8
558 Liq LinMtr_8.IQ_RATE Class_2 Variation 6 Variation 8
559 Liq LinMtr_8.PF_INUSE Class_2 Variation 6 Variation 8
560 Liq LinMtr_8.TF_INUSE Class_2 Variation 6 Variation 8
561 Liq LinMtr_8.KF_SEL Class_3 Variation 6 Variation 8
562 Liq LinMtr_8.MF_SEL Class_3 Variation 6 Variation 8
563 Liq LinMtr_8.FLUID_PROP_OBJ.SF_SEL Class_3 Variation 6 Variation 8
564 Liq LinMtr_8.FLUID_PROP_OBJ.WC_SEL Class_3 Variation 6 Variation 8
565 Liq LinMtr_8.GVOL_RATE Class_2 Variation 6 Variation 8
566 Liq LinMtr_8.UVOL_O_RATE Class_2 Variation 6 Variation 8
567 Liq LinMtr_8.SVOL_O_RATE Class_2 Variation 6 Variation 8
568 Liq LinMtr_8.UVOL_W_RATE Class_2 Variation 6 Variation 8
569 Liq LinMtr_8.SVOL_W_RATE Class_2 Variation 6 Variation 8
570 Liq LinMtr_9.IQ_RATE Class_2 Variation 6 Variation 8
571 Liq LinMtr_9.PF_INUSE Class_2 Variation 6 Variation 8
572 Liq LinMtr_9.TF_INUSE Class_2 Variation 6 Variation 8
573 Liq LinMtr_9.KF_SEL Class_3 Variation 6 Variation 8
574 Liq LinMtr_9.MF_SEL Class_3 Variation 6 Variation 8
575 Liq LinMtr_9.FLUID_PROP_OBJ.SF_SEL Class_3 Variation 6 Variation 8
576 Liq LinMtr_9.FLUID_PROP_OBJ.WC_SEL Class_3 Variation 6 Variation 8
577 Liq LinMtr_9.GVOL_RATE Class_2 Variation 6 Variation 8
578 Liq LinMtr_9.UVOL_O_RATE Class_2 Variation 6 Variation 8
579 Liq LinMtr_9.SVOL_O_RATE Class_2 Variation 6 Variation 8
580 Liq LinMtr_9.UVOL_W_RATE Class_2 Variation 6 Variation 8
581 Liq LinMtr_9.SVOL_W_RATE Class_2 Variation 6 Variation 8
582 Liq LinMtr_10.IQ_RATE Class_2 Variation 6 Variation 8
583 Liq LinMtr_10.PF_INUSE Class_2 Variation 6 Variation 8
46 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
584 Liq LinMtr_10.TF_INUSE Class_2 Variation 6 Variation 8
585 Liq LinMtr_10.KF_SEL Class_3 Variation 6 Variation 8
586 Liq LinMtr_10.MF_SEL Class_3 Variation 6 Variation 8
587 Liq LinMtr_10.FLUID_PROP_OBJ.SF_SEL Class_3 Variation 6 Variation 8
588 Liq LinMtr_10.FLUID_PROP_OBJ.WC_SEL Class_3 Variation 6 Variation 8
589 Liq LinMtr_10.GVOL_RATE Class_2 Variation 6 Variation 8
590 Liq LinMtr_10.UVOL_O_RATE Class_2 Variation 6 Variation 8
591 Liq LinMtr_10.SVOL_O_RATE Class_2 Variation 6 Variation 8
592 Liq LinMtr_10.UVOL_W_RATE Class_2 Variation 6 Variation 8
593 Liq LinMtr_10.SVOL_W_RATE Class_2 Variation 6 Variation 8
594 Liq LinMtr_11.IQ_RATE Class_2 Variation 6 Variation 8
595 Liq LinMtr_11.PF_INUSE Class_2 Variation 6 Variation 8
596 Liq LinMtr_11.TF_INUSE Class_2 Variation 6 Variation 8
597 Liq LinMtr_11.KF_SEL Class_3 Variation 6 Variation 8
598 Liq LinMtr_11.MF_SEL Class_3 Variation 6 Variation 8
599 Liq LinMtr_11.FLUID_PROP_OBJ.SF_SEL Class_3 Variation 6 Variation 8
600 Liq LinMtr_11.FLUID_PROP_OBJ.WC_SEL Class_3 Variation 6 Variation 8
601 Liq LinMtr_11.GVOL_RATE Class_2 Variation 6 Variation 8
602 Liq LinMtr_11.UVOL_O_RATE Class_2 Variation 6 Variation 8
603 Liq LinMtr_11.SVOL_O_RATE Class_2 Variation 6 Variation 8
604 Liq LinMtr_11.UVOL_W_RATE Class_2 Variation 6 Variation 8
605 Liq LinMtr_11.SVOL_W_RATE Class_2 Variation 6 Variation 8
606 Liq LinMtr_12.IQ_RATE Class_2 Variation 6 Variation 8
607 Liq LinMtr_12.PF_INUSE Class_2 Variation 6 Variation 8
608 Liq LinMtr_12.TF_INUSE Class_2 Variation 6 Variation 8
609 Liq LinMtr_12.KF_SEL Class_3 Variation 6 Variation 8
610 Liq LinMtr_12.MF_SEL Class_3 Variation 6 Variation 8
611 Liq LinMtr_12.FLUID_PROP_OBJ.SF_SEL Class_3 Variation 6 Variation 8
612 Liq LinMtr_12.FLUID_PROP_OBJ.WC_SEL Class_3 Variation 6 Variation 8
613 Liq LinMtr_12.GVOL_RATE Class_2 Variation 6 Variation 8
614 Liq LinMtr_12.UVOL_O_RATE Class_2 Variation 6 Variation 8
615 Liq LinMtr_12.SVOL_O_RATE Class_2 Variation 6 Variation 8
DNP3 Data Point List 47
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
616 Liq LinMtr_12.UVOL_W_RATE Class_2 Variation 6 Variation 8
617 Liq LinMtr_12.SVOL_W_RATE Class_2 Variation 6 Variation 8
618 Liq LinMtr_13.IQ_RATE Class_2 Variation 6 Variation 8
619 Liq LinMtr_13.PF_INUSE Class_2 Variation 6 Variation 8
620 Liq LinMtr_13.TF_INUSE Class_2 Variation 6 Variation 8
621 Liq LinMtr_13.KF_SEL Class_3 Variation 6 Variation 8
622 Liq LinMtr_13.MF_SEL Class_3 Variation 6 Variation 8
623 Liq LinMtr_13.FLUID_PROP_OBJ.SF_SEL Class_3 Variation 6 Variation 8
624 Liq LinMtr_13.FLUID_PROP_OBJ.WC_SEL Class_3 Variation 6 Variation 8
625 Liq LinMtr_13.GVOL_RATE Class_2 Variation 6 Variation 8
626 Liq LinMtr_13.UVOL_O_RATE Class_2 Variation 6 Variation 8
627 Liq LinMtr_13.SVOL_O_RATE Class_2 Variation 6 Variation 8
628 Liq LinMtr_13.UVOL_W_RATE Class_2 Variation 6 Variation 8
629 Liq LinMtr_13.SVOL_W_RATE Class_2 Variation 6 Variation 8
630 Liq LinMtr_14.IQ_RATE Class_2 Variation 6 Variation 8
631 Liq LinMtr_14.PF_INUSE Class_2 Variation 6 Variation 8
632 Liq LinMtr_14.TF_INUSE Class_2 Variation 6 Variation 8
633 Liq LinMtr_14.KF_SEL Class_3 Variation 6 Variation 8
634 Liq LinMtr_14.MF_SEL Class_3 Variation 6 Variation 8
635 Liq LinMtr_14.FLUID_PROP_OBJ.SF_SEL Class_3 Variation 6 Variation 8
636 Liq LinMtr_14.FLUID_PROP_OBJ.WC_SEL Class_3 Variation 6 Variation 8
637 Liq LinMtr_14.GVOL_RATE Class_2 Variation 6 Variation 8
638 Liq LinMtr_14.UVOL_O_RATE Class_2 Variation 6 Variation 8
639 Liq LinMtr_14.SVOL_O_RATE Class_2 Variation 6 Variation 8
640 Liq LinMtr_14.UVOL_W_RATE Class_2 Variation 6 Variation 8
641 Liq LinMtr_14.SVOL_W_RATE Class_2 Variation 6 Variation 8
642 Liq LinMtr_15.IQ_RATE Class_2 Variation 6 Variation 8
643 Liq LinMtr_15.PF_INUSE Class_2 Variation 6 Variation 8
644 Liq LinMtr_15.TF_INUSE Class_2 Variation 6 Variation 8
645 Liq LinMtr_15.KF_SEL Class_3 Variation 6 Variation 8
646 Liq LinMtr_15.MF_SEL Class_3 Variation 6 Variation 8
647 Liq LinMtr_15.FLUID_PROP_OBJ.SF_SEL Class_3 Variation 6 Variation 8
48 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
648 Liq LinMtr_15.FLUID_PROP_OBJ.WC_SEL Class_3 Variation 6 Variation 8
649 Liq LinMtr_15.GVOL_RATE Class_2 Variation 6 Variation 8
650 Liq LinMtr_15.UVOL_O_RATE Class_2 Variation 6 Variation 8
651 Liq LinMtr_15.SVOL_O_RATE Class_2 Variation 6 Variation 8
652 Liq LinMtr_15.UVOL_W_RATE Class_2 Variation 6 Variation 8
653 Liq LinMtr_15.SVOL_W_RATE Class_2 Variation 6 Variation 8
654 Liq LinMtr_16.IQ_RATE Class_2 Variation 6 Variation 8
655 Liq LinMtr_16.PF_INUSE Class_2 Variation 6 Variation 8
656 Liq LinMtr_16.TF_INUSE Class_2 Variation 6 Variation 8
657 Liq LinMtr_16.KF_SEL Class_3 Variation 6 Variation 8
658 Liq LinMtr_16.MF_SEL Class_3 Variation 6 Variation 8
659 Liq LinMtr_16.FLUID_PROP_OBJ.SF_SEL Class_3 Variation 6 Variation 8
660 Liq LinMtr_16.FLUID_PROP_OBJ.WC_SEL Class_3 Variation 6 Variation 8
661 Liq LinMtr_16.GVOL_RATE Class_2 Variation 6 Variation 8
662 Liq LinMtr_16.UVOL_O_RATE Class_2 Variation 6 Variation 8
663 Liq LinMtr_16.SVOL_O_RATE Class_2 Variation 6 Variation 8
664 Liq LinMtr_16.UVOL_W_RATE Class_2 Variation 6 Variation 8
665 Liq LinMtr_16.SVOL_W_RATE Class_2 Variation 6 Variation 8
666 Liq LinMtr_17.IQ_RATE Class_2 Variation 6 Variation 8
667 Liq LinMtr_17.PF_INUSE Class_2 Variation 6 Variation 8
668 Liq LinMtr_17.TF_INUSE Class_2 Variation 6 Variation 8
669 Liq LinMtr_17.KF_SEL Class_3 Variation 6 Variation 8
670 Liq LinMtr_17.MF_SEL Class_3 Variation 6 Variation 8
671 Liq LinMtr_17.FLUID_PROP_OBJ.SF_SEL Class_3 Variation 6 Variation 8
672 Liq LinMtr_17.FLUID_PROP_OBJ.WC_SEL Class_3 Variation 6 Variation 8
673 Liq LinMtr_17.GVOL_RATE Class_2 Variation 6 Variation 8
674 Liq LinMtr_17.UVOL_O_RATE Class_2 Variation 6 Variation 8
675 Liq LinMtr_17.SVOL_O_RATE Class_2 Variation 6 Variation 8
676 Liq LinMtr_17.UVOL_W_RATE Class_2 Variation 6 Variation 8
677 Liq LinMtr_17.SVOL_W_RATE Class_2 Variation 6 Variation 8
678 Liq LinMtr_18.IQ_RATE Class_2 Variation 6 Variation 8
679 Liq LinMtr_18.PF_INUSE Class_2 Variation 6 Variation 8
DNP3 Data Point List 49
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
680 Liq LinMtr_18.TF_INUSE Class_2 Variation 6 Variation 8
681 Liq LinMtr_18.KF_SEL Class_3 Variation 6 Variation 8
682 Liq LinMtr_18.MF_SEL Class_3 Variation 6 Variation 8
683 Liq LinMtr_18.FLUID_PROP_OBJ.SF_SEL Class_3 Variation 6 Variation 8
684 Liq LinMtr_18.FLUID_PROP_OBJ.WC_SEL Class_3 Variation 6 Variation 8
685 Liq LinMtr_18.GVOL_RATE Class_2 Variation 6 Variation 8
686 Liq LinMtr_18.UVOL_O_RATE Class_2 Variation 6 Variation 8
687 Liq LinMtr_18.SVOL_O_RATE Class_2 Variation 6 Variation 8
688 Liq LinMtr_18.UVOL_W_RATE Class_2 Variation 6 Variation 8
689 Liq LinMtr_18.SVOL_W_RATE Class_2 Variation 6 Variation 8
690 Liq LinMtr_19.IQ_RATE Class_2 Variation 6 Variation 8
691 Liq LinMtr_19.PF_INUSE Class_2 Variation 6 Variation 8
692 Liq LinMtr_19.TF_INUSE Class_2 Variation 6 Variation 8
693 Liq LinMtr_19.KF_SEL Class_3 Variation 6 Variation 8
694 Liq LinMtr_19.MF_SEL Class_3 Variation 6 Variation 8
695 Liq LinMtr_19.FLUID_PROP_OBJ.SF_SEL Class_3 Variation 6 Variation 8
696 Liq LinMtr_19.FLUID_PROP_OBJ.WC_SEL Class_3 Variation 6 Variation 8
697 Liq LinMtr_19.GVOL_RATE Class_2 Variation 6 Variation 8
698 Liq LinMtr_19.UVOL_O_RATE Class_2 Variation 6 Variation 8
699 Liq LinMtr_19.SVOL_O_RATE Class_2 Variation 6 Variation 8
700 Liq LinMtr_19.UVOL_W_RATE Class_2 Variation 6 Variation 8
701 Liq LinMtr_19.SVOL_W_RATE Class_2 Variation 6 Variation 8
702 Liq LinMtr_20.IQ_RATE Class_2 Variation 6 Variation 8
703 Liq LinMtr_20.PF_INUSE Class_2 Variation 6 Variation 8
704 Liq LinMtr_20.TF_INUSE Class_2 Variation 6 Variation 8
705 Liq LinMtr_20.KF_SEL Class_3 Variation 6 Variation 8
706 Liq LinMtr_20.MF_SEL Class_3 Variation 6 Variation 8
707 Liq LinMtr_20.FLUID_PROP_OBJ.SF_SEL Class_3 Variation 6 Variation 8
708 Liq LinMtr_20.FLUID_PROP_OBJ.WC_SEL Class_3 Variation 6 Variation 8
709 Liq LinMtr_20.GVOL_RATE Class_2 Variation 6 Variation 8
710 Liq LinMtr_20.UVOL_O_RATE Class_2 Variation 6 Variation 8
711 Liq LinMtr_20.SVOL_O_RATE Class_2 Variation 6 Variation 8
50 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
712 Liq LinMtr_20.UVOL_W_RATE Class_2 Variation 6 Variation 8
713 Liq LinMtr_20.SVOL_W_RATE Class_2 Variation 6 Variation 8
714 Liq LinMtr_21.IQ_RATE Class_2 Variation 6 Variation 8
715 Liq LinMtr_21.PF_INUSE Class_2 Variation 6 Variation 8
716 Liq LinMtr_21.TF_INUSE Class_2 Variation 6 Variation 8
717 Liq LinMtr_21.KF_SEL Class_3 Variation 6 Variation 8
718 Liq LinMtr_21.MF_SEL Class_3 Variation 6 Variation 8
719 Liq LinMtr_21.FLUID_PROP_OBJ.SF_SEL Class_3 Variation 6 Variation 8
720 Liq LinMtr_21.FLUID_PROP_OBJ.WC_SEL Class_3 Variation 6 Variation 8
721 Liq LinMtr_21.GVOL_RATE Class_2 Variation 6 Variation 8
722 Liq LinMtr_21.UVOL_O_RATE Class_2 Variation 6 Variation 8
723 Liq LinMtr_21.SVOL_O_RATE Class_2 Variation 6 Variation 8
724 Liq LinMtr_21.UVOL_W_RATE Class_2 Variation 6 Variation 8
725 Liq LinMtr_21.SVOL_W_RATE Class_2 Variation 6 Variation 8
726 Liq LinMtr_22.IQ_RATE Class_2 Variation 6 Variation 8
727 Liq LinMtr_22.PF_INUSE Class_2 Variation 6 Variation 8
728 Liq LinMtr_22.TF_INUSE Class_2 Variation 6 Variation 8
729 Liq LinMtr_22.KF_SEL Class_3 Variation 6 Variation 8
730 Liq LinMtr_22.MF_SEL Class_3 Variation 6 Variation 8
731 Liq LinMtr_22.FLUID_PROP_OBJ.SF_SEL Class_3 Variation 6 Variation 8
732 Liq LinMtr_22.FLUID_PROP_OBJ.WC_SEL Class_3 Variation 6 Variation 8
733 Liq LinMtr_22.GVOL_RATE Class_2 Variation 6 Variation 8
734 Liq LinMtr_22.UVOL_O_RATE Class_2 Variation 6 Variation 8
735 Liq LinMtr_22.SVOL_O_RATE Class_2 Variation 6 Variation 8
736 Liq LinMtr_22.UVOL_W_RATE Class_2 Variation 6 Variation 8
737 Liq LinMtr_22.SVOL_W_RATE Class_2 Variation 6 Variation 8
738 Liq LinMtr_23.IQ_RATE Class_2 Variation 6 Variation 8
739 Liq LinMtr_23.PF_INUSE Class_2 Variation 6 Variation 8
740 Liq LinMtr_23.TF_INUSE Class_2 Variation 6 Variation 8
741 Liq LinMtr_23.KF_SEL Class_3 Variation 6 Variation 8
742 Liq LinMtr_23.MF_SEL Class_3 Variation 6 Variation 8
743 Liq LinMtr_23.FLUID_PROP_OBJ.SF_SEL Class_3 Variation 6 Variation 8
DNP3 Data Point List 51
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
744 Liq LinMtr_23.FLUID_PROP_OBJ.WC_SEL Class_3 Variation 6 Variation 8
745 Liq LinMtr_23.GVOL_RATE Class_2 Variation 6 Variation 8
746 Liq LinMtr_23.UVOL_O_RATE Class_2 Variation 6 Variation 8
747 Liq LinMtr_23.SVOL_O_RATE Class_2 Variation 6 Variation 8
748 Liq LinMtr_23.UVOL_W_RATE Class_2 Variation 6 Variation 8
749 Liq LinMtr_23.SVOL_W_RATE Class_2 Variation 6 Variation 8
750 Liq LinMtr_24.IQ_RATE Class_2 Variation 6 Variation 8
751 Liq LinMtr_24.PF_INUSE Class_2 Variation 6 Variation 8
752 Liq LinMtr_24.TF_INUSE Class_2 Variation 6 Variation 8
753 Liq LinMtr_24.KF_SEL Class_3 Variation 6 Variation 8
754 Liq LinMtr_24.MF_SEL Class_3 Variation 6 Variation 8
755 Liq LinMtr_24.FLUID_PROP_OBJ.SF_SEL Class_3 Variation 6 Variation 8
756 Liq LinMtr_24.FLUID_PROP_OBJ.WC_SEL Class_3 Variation 6 Variation 8
757 Liq LinMtr_24.GVOL_RATE Class_2 Variation 6 Variation 8
758 Liq LinMtr_24.UVOL_O_RATE Class_2 Variation 6 Variation 8
759 Liq LinMtr_24.SVOL_O_RATE Class_2 Variation 6 Variation 8
760 Liq LinMtr_24.UVOL_W_RATE Class_2 Variation 6 Variation 8
761 Liq LinMtr_24.SVOL_W_RATE Class_2 Variation 6 Variation 8
762 Station_1.UVOL_RATE Class_2 Variation 6 Variation 8
763 Station_1.SVOL_RATE Class_2 Variation 6 Variation 8
764 Station_1.MASS_RATE Class_2 Variation 6 Variation 8
765 Station_1.ENERGY_RATE Class_2 Variation 6 Variation 8
766 Station_2.UVOL_RATE Class_2 Variation 6 Variation 8
767 Station_2.SVOL_RATE Class_2 Variation 6 Variation 8
768 Station_2.MASS_RATE Class_2 Variation 6 Variation 8
769 Station_2.ENERGY_RATE Class_2 Variation 6 Variation 8
770 Station_3.UVOL_RATE Class_2 Variation 6 Variation 8
771 Station_3.SVOL_RATE Class_2 Variation 6 Variation 8
772 Station_3.MASS_RATE Class_2 Variation 6 Variation 8
773 Station_3.ENERGY_RATE Class_2 Variation 6 Variation 8
774 Station_4.UVOL_RATE Class_2 Variation 6 Variation 8
775 Station_4.SVOL_RATE Class_2 Variation 6 Variation 8
52 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
776 Station_4.MASS_RATE Class_2 Variation 6 Variation 8
777 Station_4.ENERGY_RATE Class_2 Variation 6 Variation 8
778 Station_5.UVOL_RATE Class_2 Variation 6 Variation 8
779 Station_5.SVOL_RATE Class_2 Variation 6 Variation 8
780 Station_5.MASS_RATE Class_2 Variation 6 Variation 8
781 Station_5.ENERGY_RATE Class_2 Variation 6 Variation 8
782 Station_6.UVOL_RATE Class_2 Variation 6 Variation 8
783 Station_6.SVOL_RATE Class_2 Variation 6 Variation 8
784 Station_6.MASS_RATE Class_2 Variation 6 Variation 8
785 Station_6.ENERGY_RATE Class_2 Variation 6 Variation 8
786 Station_7.UVOL_RATE Class_2 Variation 6 Variation 8
787 Station_7.SVOL_RATE Class_2 Variation 6 Variation 8
788 Station_7.MASS_RATE Class_2 Variation 6 Variation 8
789 Station_7.ENERGY_RATE Class_2 Variation 6 Variation 8
790 Station_8.UVOL_RATE Class_2 Variation 6 Variation 8
791 Station_8.SVOL_RATE Class_2 Variation 6 Variation 8
792 Station_8.MASS_RATE Class_2 Variation 6 Variation 8
793 Station_8.ENERGY_RATE Class_2 Variation 6 Variation 8
794 Station_9.UVOL_RATE Class_2 Variation 6 Variation 8
795 Station_9.SVOL_RATE Class_2 Variation 6 Variation 8
796 Station_9.MASS_RATE Class_2 Variation 6 Variation 8
797 Station_9.ENERGY_RATE Class_2 Variation 6 Variation 8
798 Station_10.UVOL_RATE Class_2 Variation 6 Variation 8
799 Station_10.SVOL_RATE Class_2 Variation 6 Variation 8
800 Station_10.MASS_RATE Class_2 Variation 6 Variation 8
801 Station_10.ENERGY_RATE Class_2 Variation 6 Variation 8
802 Station_11.UVOL_RATE Class_2 Variation 6 Variation 8
803 Station_11.SVOL_RATE Class_2 Variation 6 Variation 8
804 Station_11.MASS_RATE Class_2 Variation 6 Variation 8
805 Station_11.ENERGY_RATE Class_2 Variation 6 Variation 8
806 Station_12.UVOL_RATE Class_2 Variation 6 Variation 8
807 Station_12.SVOL_RATE Class_2 Variation 6 Variation 8
DNP3 Data Point List 53
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
808 Station_12.MASS_RATE Class_2 Variation 6 Variation 8
809 Station_12.ENERGY_RATE Class_2 Variation 6 Variation 8
810 Station_13.UVOL_RATE Class_2 Variation 6 Variation 8
811 Station_13.SVOL_RATE Class_2 Variation 6 Variation 8
812 Station_13.MASS_RATE Class_2 Variation 6 Variation 8
813 Station_13.ENERGY_RATE Class_2 Variation 6 Variation 8
814 Station_14.UVOL_RATE Class_2 Variation 6 Variation 8
815 Station_14.SVOL_RATE Class_2 Variation 6 Variation 8
816 Station_14.MASS_RATE Class_2 Variation 6 Variation 8
817 Station_14.ENERGY_RATE Class_2 Variation 6 Variation 8
818 Station_15.UVOL_RATE Class_2 Variation 6 Variation 8
819 Station_15.SVOL_RATE Class_2 Variation 6 Variation 8
820 Station_15.MASS_RATE Class_2 Variation 6 Variation 8
821 Station_15.ENERGY_RATE Class_2 Variation 6 Variation 8
822 Station_16.UVOL_RATE Class_2 Variation 6 Variation 8
823 Station_16.SVOL_RATE Class_2 Variation 6 Variation 8
824 Station_16.MASS_RATE Class_2 Variation 6 Variation 8
825 Station_16.ENERGY_RATE Class_2 Variation 6 Variation 8
826 Station_17.UVOL_RATE Class_2 Variation 6 Variation 8
827 Station_17.SVOL_RATE Class_2 Variation 6 Variation 8
828 Station_17.MASS_RATE Class_2 Variation 6 Variation 8
829 Station_17.ENERGY_RATE Class_2 Variation 6 Variation 8
830 Station_18.UVOL_RATE Class_2 Variation 6 Variation 8
831 Station_18.SVOL_RATE Class_2 Variation 6 Variation 8
832 Station_18.MASS_RATE Class_2 Variation 6 Variation 8
833 Station_18.ENERGY_RATE Class_2 Variation 6 Variation 8
834 Station_19.UVOL_RATE Class_2 Variation 6 Variation 8
835 Station_19.SVOL_RATE Class_2 Variation 6 Variation 8
836 Station_19.MASS_RATE Class_2 Variation 6 Variation 8
837 Station_19.ENERGY_RATE Class_2 Variation 6 Variation 8
838 Station_20.UVOL_RATE Class_2 Variation 6 Variation 8
839 Station_20.SVOL_RATE Class_2 Variation 6 Variation 8
54 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
840 Station_20.MASS_RATE Class_2 Variation 6 Variation 8
841 Station_20.ENERGY_RATE Class_2 Variation 6 Variation 8
842 Station_21.UVOL_RATE Class_2 Variation 6 Variation 8
843 Station_21.SVOL_RATE Class_2 Variation 6 Variation 8
844 Station_21.MASS_RATE Class_2 Variation 6 Variation 8
845 Station_21.ENERGY_RATE Class_2 Variation 6 Variation 8
846 Station_22.UVOL_RATE Class_2 Variation 6 Variation 8
847 Station_22.SVOL_RATE Class_2 Variation 6 Variation 8
848 Station_22.MASS_RATE Class_2 Variation 6 Variation 8
849 Station_22.ENERGY_RATE Class_2 Variation 6 Variation 8
850 Station_23.UVOL_RATE Class_2 Variation 6 Variation 8
851 Station_23.SVOL_RATE Class_2 Variation 6 Variation 8
852 Station_23.MASS_RATE Class_2 Variation 6 Variation 8
853 Station_23.ENERGY_RATE Class_2 Variation 6 Variation 8
854 Station_24.UVOL_RATE Class_2 Variation 6 Variation 8
855 Station_24.SVOL_RATE Class_2 Variation 6 Variation 8
856 Station_24.MASS_RATE Class_2 Variation 6 Variation 8
857 Station_24.ENERGY_RATE Class_2 Variation 6 Variation 8
858 DP_1-1.SELECTED Class_2 Variation 5 Variation 7
859 DP_1-2.SELECTED Class_2 Variation 5 Variation 7
860 DP_1-3.SELECTED Class_2 Variation 5 Variation 7
861 DP_1-4.SELECTED Class_2 Variation 5 Variation 7
862 DP_1-5.SELECTED Class_2 Variation 5 Variation 7
863 DP_1-6.SELECTED Class_2 Variation 5 Variation 7
864 DP_1-7.SELECTED Class_2 Variation 5 Variation 7
865 DP_1-8.SELECTED Class_2 Variation 5 Variation 7
866 DP_1-9.SELECTED Class_2 Variation 5 Variation 7
867 DP_1-10.SELECTED Class_2 Variation 5 Variation 7
868 DP_1-11.SELECTED Class_2 Variation 5 Variation 7
869 DP_1-12.SELECTED Class_2 Variation 5 Variation 7
870 DP_1-13.SELECTED Class_2 Variation 5 Variation 7
871 DP_1-14.SELECTED Class_2 Variation 5 Variation 7
DNP3 Data Point List 55
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
872 DP_1-15.SELECTED Class_2 Variation 5 Variation 7
873 DP_1-16.SELECTED Class_2 Variation 5 Variation 7
874 DP_1-17.SELECTED Class_2 Variation 5 Variation 7
875 DP_1-18.SELECTED Class_2 Variation 5 Variation 7
876 DP_1-19.SELECTED Class_2 Variation 5 Variation 7
877 DP_1-20.SELECTED Class_2 Variation 5 Variation 7
878 Press_1-1.SELECTED Class_2 Variation 5 Variation 7
879 Press_1-2.SELECTED Class_2 Variation 5 Variation 7
880 Press_1-3.SELECTED Class_2 Variation 5 Variation 7
881 Press_1-4.SELECTED Class_2 Variation 5 Variation 7
882 Press_1-5.SELECTED Class_2 Variation 5 Variation 7
883 Press_1-6.SELECTED Class_2 Variation 5 Variation 7
884 Press_1-7.SELECTED Class_2 Variation 5 Variation 7
885 Press_1-8.SELECTED Class_2 Variation 5 Variation 7
886 Press_1-9.SELECTED Class_2 Variation 5 Variation 7
887 Press_1-10.SELECTED Class_2 Variation 5 Variation 7
888 Press_1-11.SELECTED Class_2 Variation 5 Variation 7
889 Press_1-12.SELECTED Class_2 Variation 5 Variation 7
890 Press_1-13.SELECTED Class_2 Variation 5 Variation 7
891 Press_1-14.SELECTED Class_2 Variation 5 Variation 7
892 Press_1-15.SELECTED Class_2 Variation 5 Variation 7
893 Press_1-16.SELECTED Class_2 Variation 5 Variation 7
894 Press_1-17.SELECTED Class_2 Variation 5 Variation 7
895 Press_1-18.SELECTED Class_2 Variation 5 Variation 7
896 Press_1-19.SELECTED Class_2 Variation 5 Variation 7
897 Press_1-20.SELECTED Class_2 Variation 5 Variation 7
898 RTD_1-1.SELECTED Class_2 Variation 5 Variation 7
899 RTD_1-2.SELECTED Class_2 Variation 5 Variation 7
900 RTD_1-3.SELECTED Class_2 Variation 5 Variation 7
901 RTD_1-4.SELECTED Class_2 Variation 5 Variation 7
902 RTD_1-5.SELECTED Class_2 Variation 5 Variation 7
903 RTD_1-6.SELECTED Class_2 Variation 5 Variation 7
56 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
904 RTD_1-7.SELECTED Class_2 Variation 5 Variation 7
905 RTD_1-8.SELECTED Class_2 Variation 5 Variation 7
906 RTD_1-9.SELECTED Class_2 Variation 5 Variation 7
907 RTD_1-10.SELECTED Class_2 Variation 5 Variation 7
908 RTD_1-11.SELECTED Class_2 Variation 5 Variation 7
909 RTD_1-12.SELECTED Class_2 Variation 5 Variation 7
910 RTD_1-13.SELECTED Class_2 Variation 5 Variation 7
911 RTD_1-14.SELECTED Class_2 Variation 5 Variation 7
912 RTD_1-15.SELECTED Class_2 Variation 5 Variation 7
913 RTD_1-16.SELECTED Class_2 Variation 5 Variation 7
914 RTD_1-17.SELECTED Class_2 Variation 5 Variation 7
915 RTD_1-18.SELECTED Class_2 Variation 5 Variation 7
916 RTD_1-19.SELECTED Class_2 Variation 5 Variation 7
917 RTD_1-20.SELECTED Class_2 Variation 5 Variation 7
918 AI_2-1.SELECTED Class_2 Variation 5 Variation 7
919 AI_2-1.INPUT_STATUS Class_1 Variation 2 Variation 4
920 AI_2-2.SELECTED Class_2 Variation 5 Variation 7
921 AI_2-2.INPUT_STATUS Class_1 Variation 2 Variation 4
922 AI_2-3.SELECTED Class_2 Variation 5 Variation 7
923 AI_2-3.INPUT_STATUS Class_1 Variation 2 Variation 4
924 AI_2-4.SELECTED Class_2 Variation 5 Variation 7
925 AI_2-4.INPUT_STATUS Class_1 Variation 2 Variation 4
926 AI_2-5.SELECTED Class_2 Variation 5 Variation 7
927 AI_2-5.INPUT_STATUS Class_1 Variation 2 Variation 4
928 AI_2-6.SELECTED Class_2 Variation 5 Variation 7
929 AI_2-6.INPUT_STATUS Class_1 Variation 2 Variation 4
930 AI_2-7.SELECTED Class_2 Variation 5 Variation 7
931 AI_2-7.INPUT_STATUS Class_1 Variation 2 Variation 4
932 AI_2-8.SELECTED Class_2 Variation 5 Variation 7
933 AI_2-8.INPUT_STATUS Class_1 Variation 2 Variation 4
934 AI_3-1.SELECTED Class_2 Variation 5 Variation 7
935 AI_3-1.INPUT_STATUS Class_1 Variation 2 Variation 4
DNP3 Data Point List 57
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
936 AI_3-2.SELECTED Class_2 Variation 5 Variation 7
937 AI_3-2.INPUT_STATUS Class_1 Variation 2 Variation 4
938 AI_3-3.SELECTED Class_2 Variation 5 Variation 7
939 AI_3-3.INPUT_STATUS Class_1 Variation 2 Variation 4
940 AI_3-4.SELECTED Class_2 Variation 5 Variation 7
941 AI_3-4.INPUT_STATUS Class_1 Variation 2 Variation 4
942 AI_3-5.SELECTED Class_2 Variation 5 Variation 7
943 AI_3-5.INPUT_STATUS Class_1 Variation 2 Variation 4
944 AI_3-6.SELECTED Class_2 Variation 5 Variation 7
945 AI_3-6.INPUT_STATUS Class_1 Variation 2 Variation 4
946 AI_3-7.SELECTED Class_2 Variation 5 Variation 7
947 AI_3-7.INPUT_STATUS Class_1 Variation 2 Variation 4
948 AI_3-8.SELECTED Class_2 Variation 5 Variation 7
949 AI_3-8.INPUT_STATUS Class_1 Variation 2 Variation 4
950 AI_4-1.SELECTED Class_2 Variation 5 Variation 7
951 AI_4-1.INPUT_STATUS Class_1 Variation 2 Variation 4
952 AI_4-2.SELECTED Class_2 Variation 5 Variation 7
953 AI_4-2.INPUT_STATUS Class_1 Variation 2 Variation 4
954 AI_4-3.SELECTED Class_2 Variation 5 Variation 7
955 AI_4-3.INPUT_STATUS Class_1 Variation 2 Variation 4
956 AI_4-4.SELECTED Class_2 Variation 5 Variation 7
957 AI_4-4.INPUT_STATUS Class_1 Variation 2 Variation 4
958 AI_4-5.SELECTED Class_2 Variation 5 Variation 7
959 AI_4-5.INPUT_STATUS Class_1 Variation 2 Variation 4
960 AI_4-6.SELECTED Class_2 Variation 5 Variation 7
961 AI_4-6.INPUT_STATUS Class_1 Variation 2 Variation 4
962 AI_4-7.SELECTED Class_2 Variation 5 Variation 7
963 AI_4-7.INPUT_STATUS Class_1 Variation 2 Variation 4
964 AI_4-8.SELECTED Class_2 Variation 5 Variation 7
965 AI_4-8.INPUT_STATUS Class_1 Variation 2 Variation 4
966 AI_5-1.SELECTED Class_2 Variation 5 Variation 7
967 AI_5-1.INPUT_STATUS Class_1 Variation 2 Variation 4
58 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
968 AI_5-2.SELECTED Class_2 Variation 5 Variation 7
969 AI_5-2.INPUT_STATUS Class_1 Variation 2 Variation 4
970 AI_5-3.SELECTED Class_2 Variation 5 Variation 7
971 AI_5-3.INPUT_STATUS Class_1 Variation 2 Variation 4
972 AI_5-4.SELECTED Class_2 Variation 5 Variation 7
973 AI_5-4.INPUT_STATUS Class_1 Variation 2 Variation 4
974 AI_5-5.SELECTED Class_2 Variation 5 Variation 7
975 AI_5-5.INPUT_STATUS Class_1 Variation 2 Variation 4
976 AI_5-6.SELECTED Class_2 Variation 5 Variation 7
977 AI_5-6.INPUT_STATUS Class_1 Variation 2 Variation 4
978 AI_5-7.SELECTED Class_2 Variation 5 Variation 7
979 AI_5-7.INPUT_STATUS Class_1 Variation 2 Variation 4
980 AI_5-8.SELECTED Class_2 Variation 5 Variation 7
981 AI_5-8.INPUT_STATUS Class_1 Variation 2 Variation 4
982 AI_6-1.SELECTED Class_2 Variation 5 Variation 7
983 AI_6-1.INPUT_STATUS Class_1 Variation 2 Variation 4
984 AI_6-2.SELECTED Class_2 Variation 5 Variation 7
985 AI_6-2.INPUT_STATUS Class_1 Variation 2 Variation 4
986 AI_6-3.SELECTED Class_2 Variation 5 Variation 7
987 AI_6-3.INPUT_STATUS Class_1 Variation 2 Variation 4
988 AI_6-4.SELECTED Class_2 Variation 5 Variation 7
989 AI_6-4.INPUT_STATUS Class_1 Variation 2 Variation 4
990 AI_6-5.SELECTED Class_2 Variation 5 Variation 7
991 AI_6-5.INPUT_STATUS Class_1 Variation 2 Variation 4
992 AI_6-6.SELECTED Class_2 Variation 5 Variation 7
993 AI_6-6.INPUT_STATUS Class_1 Variation 2 Variation 4
994 AI_6-7.SELECTED Class_2 Variation 5 Variation 7
995 AI_6-7.INPUT_STATUS Class_1 Variation 2 Variation 4
996 AI_6-8.SELECTED Class_2 Variation 5 Variation 7
997 AI_6-8.INPUT_STATUS Class_1 Variation 2 Variation 4
998 AI_7-1.SELECTED Class_2 Variation 5 Variation 7
999 AI_7-1.INPUT_STATUS Class_1 Variation 2 Variation 4
DNP3 Data Point List 59
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1000 AI_7-2.SELECTED Class_2 Variation 5 Variation 7
1001 AI_7-2.INPUT_STATUS Class_1 Variation 2 Variation 4
1002 AI_7-3.SELECTED Class_2 Variation 5 Variation 7
1003 AI_7-3.INPUT_STATUS Class_1 Variation 2 Variation 4
1004 AI_7-4.SELECTED Class_2 Variation 5 Variation 7
1005 AI_7-4.INPUT_STATUS Class_1 Variation 2 Variation 4
1006 AI_7-5.SELECTED Class_2 Variation 5 Variation 7
1007 AI_7-5.INPUT_STATUS Class_1 Variation 2 Variation 4
1008 AI_7-6.SELECTED Class_2 Variation 5 Variation 7
1009 AI_7-6.INPUT_STATUS Class_1 Variation 2 Variation 4
1010 AI_7-7.SELECTED Class_2 Variation 5 Variation 7
1011 AI_7-7.INPUT_STATUS Class_1 Variation 2 Variation 4
1012 AI_7-8.SELECTED Class_2 Variation 5 Variation 7
1013 AI_7-8.INPUT_STATUS Class_1 Variation 2 Variation 4
1014 AI_8-1.SELECTED Class_2 Variation 5 Variation 7
1015 AI_8-1.INPUT_STATUS Class_1 Variation 2 Variation 4
1016 AI_8-2.SELECTED Class_2 Variation 5 Variation 7
1017 AI_8-2.INPUT_STATUS Class_1 Variation 2 Variation 4
1018 AI_8-3.SELECTED Class_2 Variation 5 Variation 7
1019 AI_8-3.INPUT_STATUS Class_1 Variation 2 Variation 4
1020 AI_8-4.SELECTED Class_2 Variation 5 Variation 7
1021 AI_8-4.INPUT_STATUS Class_1 Variation 2 Variation 4
1022 AI_8-5.SELECTED Class_2 Variation 5 Variation 7
1023 AI_8-5.INPUT_STATUS Class_1 Variation 2 Variation 4
1024 AI_8-6.SELECTED Class_2 Variation 5 Variation 7
1025 AI_8-6.INPUT_STATUS Class_1 Variation 2 Variation 4
1026 AI_8-7.SELECTED Class_2 Variation 5 Variation 7
1027 AI_8-7.INPUT_STATUS Class_1 Variation 2 Variation 4
1028 AI_8-8.SELECTED Class_2 Variation 5 Variation 7
1029 AI_8-8.INPUT_STATUS Class_1 Variation 2 Variation 4
1030 DI_2-1.INPUT_STATUS Class_1 Variation 2 Variation 4
1031 DI_2-2.INPUT_STATUS Class_1 Variation 2 Variation 4
60 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1032 DI_2-3.INPUT_STATUS Class_1 Variation 2 Variation 4
1033 DI_2-4.INPUT_STATUS Class_1 Variation 2 Variation 4
1034 DI_2-5.INPUT_STATUS Class_1 Variation 2 Variation 4
1035 DI_2-6.INPUT_STATUS Class_1 Variation 2 Variation 4
1036 DI_2-7.INPUT_STATUS Class_1 Variation 2 Variation 4
1037 DI_2-8.INPUT_STATUS Class_1 Variation 2 Variation 4
1038 DI_3-1.INPUT_STATUS Class_1 Variation 2 Variation 4
1039 DI_3-2.INPUT_STATUS Class_1 Variation 2 Variation 4
1040 DI_3-3.INPUT_STATUS Class_1 Variation 2 Variation 4
1041 DI_3-4.INPUT_STATUS Class_1 Variation 2 Variation 4
1042 DI_3-5.INPUT_STATUS Class_1 Variation 2 Variation 4
1043 DI_3-6.INPUT_STATUS Class_1 Variation 2 Variation 4
1044 DI_3-7.INPUT_STATUS Class_1 Variation 2 Variation 4
1045 DI_3-8.INPUT_STATUS Class_1 Variation 2 Variation 4
1046 DI_4-1.INPUT_STATUS Class_1 Variation 2 Variation 4
1047 DI_4-2.INPUT_STATUS Class_1 Variation 2 Variation 4
1048 DI_4-3.INPUT_STATUS Class_1 Variation 2 Variation 4
1049 DI_4-4.INPUT_STATUS Class_1 Variation 2 Variation 4
1050 DI_4-5.INPUT_STATUS Class_1 Variation 2 Variation 4
1051 DI_4-6.INPUT_STATUS Class_1 Variation 2 Variation 4
1052 DI_4-7.INPUT_STATUS Class_1 Variation 2 Variation 4
1053 DI_4-8.INPUT_STATUS Class_1 Variation 2 Variation 4
1054 DI_5-1.INPUT_STATUS Class_1 Variation 2 Variation 4
1055 DI_5-2.INPUT_STATUS Class_1 Variation 2 Variation 4
1056 DI_5-3.INPUT_STATUS Class_1 Variation 2 Variation 4
1057 DI_5-4.INPUT_STATUS Class_1 Variation 2 Variation 4
1058 DI_5-5.INPUT_STATUS Class_1 Variation 2 Variation 4
1059 DI_5-6.INPUT_STATUS Class_1 Variation 2 Variation 4
1060 DI_5-7.INPUT_STATUS Class_1 Variation 2 Variation 4
1061 DI_5-8.INPUT_STATUS Class_1 Variation 2 Variation 4
1062 DI_6-1.INPUT_STATUS Class_1 Variation 2 Variation 4
1063 DI_6-2.INPUT_STATUS Class_1 Variation 2 Variation 4
DNP3 Data Point List 61
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1064 DI_6-3.INPUT_STATUS Class_1 Variation 2 Variation 4
1065 DI_6-4.INPUT_STATUS Class_1 Variation 2 Variation 4
1066 DI_6-5.INPUT_STATUS Class_1 Variation 2 Variation 4
1067 DI_6-6.INPUT_STATUS Class_1 Variation 2 Variation 4
1068 DI_6-7.INPUT_STATUS Class_1 Variation 2 Variation 4
1069 DI_6-8.INPUT_STATUS Class_1 Variation 2 Variation 4
1070 DI_7-1.INPUT_STATUS Class_1 Variation 2 Variation 4
1071 DI_7-2.INPUT_STATUS Class_1 Variation 2 Variation 4
1072 DI_7-3.INPUT_STATUS Class_1 Variation 2 Variation 4
1073 DI_7-4.INPUT_STATUS Class_1 Variation 2 Variation 4
1074 DI_7-5.INPUT_STATUS Class_1 Variation 2 Variation 4
1075 DI_7-6.INPUT_STATUS Class_1 Variation 2 Variation 4
1076 DI_7-7.INPUT_STATUS Class_1 Variation 2 Variation 4
1077 DI_7-8.INPUT_STATUS Class_1 Variation 2 Variation 4
1078 DI_8-1.INPUT_STATUS Class_1 Variation 2 Variation 4
1079 DI_8-2.INPUT_STATUS Class_1 Variation 2 Variation 4
1080 DI_8-3.INPUT_STATUS Class_1 Variation 2 Variation 4
1081 DI_8-4.INPUT_STATUS Class_1 Variation 2 Variation 4
1082 DI_8-5.INPUT_STATUS Class_1 Variation 2 Variation 4
1083 DI_8-6.INPUT_STATUS Class_1 Variation 2 Variation 4
1084 DI_8-7.INPUT_STATUS Class_1 Variation 2 Variation 4
1085 DI_8-8.INPUT_STATUS Class_1 Variation 2 Variation 4
1086 PI_2-1.SELECTED_FREQ Class_2 Variation 5 Variation 7
1087 PI_2-1.INPUT_STATUS Class_1 Variation 2 Variation 4
1088 PI_2-2.SELECTED_FREQ Class_2 Variation 5 Variation 7
1089 PI_2-2.INPUT_STATUS Class_1 Variation 2 Variation 4
1090 PI_2-3.SELECTED_FREQ Class_2 Variation 5 Variation 7
1091 PI_2-3.INPUT_STATUS Class_1 Variation 2 Variation 4
1092 PI_2-4.SELECTED_FREQ Class_2 Variation 5 Variation 7
1093 PI_2-4.INPUT_STATUS Class_1 Variation 2 Variation 4
1094 PI_2-5.SELECTED_FREQ Class_2 Variation 5 Variation 7
1095 PI_2-5.INPUT_STATUS Class_1 Variation 2 Variation 4
62 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1096 PI_2-6.SELECTED_FREQ Class_2 Variation 5 Variation 7
1097 PI_2-6.INPUT_STATUS Class_1 Variation 2 Variation 4
1098 PI_2-7.SELECTED_FREQ Class_2 Variation 5 Variation 7
1099 PI_2-7.INPUT_STATUS Class_1 Variation 2 Variation 4
1100 PI_2-8.SELECTED_FREQ Class_2 Variation 5 Variation 7
1101 PI_2-8.INPUT_STATUS Class_1 Variation 2 Variation 4
1102 PI_3-1.SELECTED_FREQ Class_2 Variation 5 Variation 7
1103 PI_3-1.INPUT_STATUS Class_1 Variation 2 Variation 4
1104 PI_3-2.SELECTED_FREQ Class_2 Variation 5 Variation 7
1105 PI_3-2.INPUT_STATUS Class_1 Variation 2 Variation 4
1106 PI_3-3.SELECTED_FREQ Class_2 Variation 5 Variation 7
1107 PI_3-3.INPUT_STATUS Class_1 Variation 2 Variation 4
1108 PI_3-4.SELECTED_FREQ Class_2 Variation 5 Variation 7
1109 PI_3-4.INPUT_STATUS Class_1 Variation 2 Variation 4
1110 PI_3-5.SELECTED_FREQ Class_2 Variation 5 Variation 7
1111 PI_3-5.INPUT_STATUS Class_1 Variation 2 Variation 4
1112 PI_3-6.SELECTED_FREQ Class_2 Variation 5 Variation 7
1113 PI_3-6.INPUT_STATUS Class_1 Variation 2 Variation 4
1114 PI_3-7.SELECTED_FREQ Class_2 Variation 5 Variation 7
1115 PI_3-7.INPUT_STATUS Class_1 Variation 2 Variation 4
1116 PI_3-8.SELECTED_FREQ Class_2 Variation 5 Variation 7
1117 PI_3-8.INPUT_STATUS Class_1 Variation 2 Variation 4
1118 PI_4-1.SELECTED_FREQ Class_2 Variation 5 Variation 7
1119 PI_4-1.INPUT_STATUS Class_1 Variation 2 Variation 4
1120 PI_4-2.SELECTED_FREQ Class_2 Variation 5 Variation 7
1121 PI_4-2.INPUT_STATUS Class_1 Variation 2 Variation 4
1122 PI_4-3.SELECTED_FREQ Class_2 Variation 5 Variation 7
1123 PI_4-3.INPUT_STATUS Class_1 Variation 2 Variation 4
1124 PI_4-4.SELECTED_FREQ Class_2 Variation 5 Variation 7
1125 PI_4-4.INPUT_STATUS Class_1 Variation 2 Variation 4
1126 PI_4-5.SELECTED_FREQ Class_2 Variation 5 Variation 7
1127 PI_4-5.INPUT_STATUS Class_1 Variation 2 Variation 4
DNP3 Data Point List 63
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1128 PI_4-6.SELECTED_FREQ Class_2 Variation 5 Variation 7
1129 PI_4-6.INPUT_STATUS Class_1 Variation 2 Variation 4
1130 PI_4-7.SELECTED_FREQ Class_2 Variation 5 Variation 7
1131 PI_4-7.INPUT_STATUS Class_1 Variation 2 Variation 4
1132 PI_4-8.SELECTED_FREQ Class_2 Variation 5 Variation 7
1133 PI_4-8.INPUT_STATUS Class_1 Variation 2 Variation 4
1134 PI_5-1.SELECTED_FREQ Class_2 Variation 5 Variation 7
1135 PI_5-1.INPUT_STATUS Class_1 Variation 2 Variation 4
1136 PI_5-2.SELECTED_FREQ Class_2 Variation 5 Variation 7
1137 PI_5-2.INPUT_STATUS Class_1 Variation 2 Variation 4
1138 PI_5-3.SELECTED_FREQ Class_2 Variation 5 Variation 7
1139 PI_5-3.INPUT_STATUS Class_1 Variation 2 Variation 4
1140 PI_5-4.SELECTED_FREQ Class_2 Variation 5 Variation 7
1141 PI_5-4.INPUT_STATUS Class_1 Variation 2 Variation 4
1142 PI_5-5.SELECTED_FREQ Class_2 Variation 5 Variation 7
1143 PI_5-5.INPUT_STATUS Class_1 Variation 2 Variation 4
1144 PI_5-6.SELECTED_FREQ Class_2 Variation 5 Variation 7
1145 PI_5-6.INPUT_STATUS Class_1 Variation 2 Variation 4
1146 PI_5-7.SELECTED_FREQ Class_2 Variation 5 Variation 7
1147 PI_5-7.INPUT_STATUS Class_1 Variation 2 Variation 4
1148 PI_5-8.SELECTED_FREQ Class_2 Variation 5 Variation 7
1149 PI_5-8.INPUT_STATUS Class_1 Variation 2 Variation 4
1150 PI_6-1.SELECTED_FREQ Class_2 Variation 5 Variation 7
1151 PI_6-1.INPUT_STATUS Class_1 Variation 2 Variation 4
1152 PI_6-2.SELECTED_FREQ Class_2 Variation 5 Variation 7
1153 PI_6-2.INPUT_STATUS Class_1 Variation 2 Variation 4
1154 PI_6-3.SELECTED_FREQ Class_2 Variation 5 Variation 7
1155 PI_6-3.INPUT_STATUS Class_1 Variation 2 Variation 4
1156 PI_6-4.SELECTED_FREQ Class_2 Variation 5 Variation 7
1157 PI_6-4.INPUT_STATUS Class_1 Variation 2 Variation 4
1158 PI_6-5.SELECTED_FREQ Class_2 Variation 5 Variation 7
1159 PI_6-5.INPUT_STATUS Class_1 Variation 2 Variation 4
64 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1160 PI_6-6.SELECTED_FREQ Class_2 Variation 5 Variation 7
1161 PI_6-6.INPUT_STATUS Class_1 Variation 2 Variation 4
1162 PI_6-7.SELECTED_FREQ Class_2 Variation 5 Variation 7
1163 PI_6-7.INPUT_STATUS Class_1 Variation 2 Variation 4
1164 PI_6-8.SELECTED_FREQ Class_2 Variation 5 Variation 7
1165 PI_6-8.INPUT_STATUS Class_1 Variation 2 Variation 4
1166 PI_7-1.SELECTED_FREQ Class_2 Variation 5 Variation 7
1167 PI_7-1.INPUT_STATUS Class_1 Variation 2 Variation 4
1168 PI_7-2.SELECTED_FREQ Class_2 Variation 5 Variation 7
1169 PI_7-2.INPUT_STATUS Class_1 Variation 2 Variation 4
1170 PI_7-3.SELECTED_FREQ Class_2 Variation 5 Variation 7
1171 PI_7-3.INPUT_STATUS Class_1 Variation 2 Variation 4
1172 PI_7-4.SELECTED_FREQ Class_2 Variation 5 Variation 7
1173 PI_7-4.INPUT_STATUS Class_1 Variation 2 Variation 4
1174 PI_7-5.SELECTED_FREQ Class_2 Variation 5 Variation 7
1175 PI_7-5.INPUT_STATUS Class_1 Variation 2 Variation 4
1176 PI_7-6.SELECTED_FREQ Class_2 Variation 5 Variation 7
1177 PI_7-6.INPUT_STATUS Class_1 Variation 2 Variation 4
1178 PI_7-7.SELECTED_FREQ Class_2 Variation 5 Variation 7
1179 PI_7-7.INPUT_STATUS Class_1 Variation 2 Variation 4
1180 PI_7-8.SELECTED_FREQ Class_2 Variation 5 Variation 7
1181 PI_7-8.INPUT_STATUS Class_1 Variation 2 Variation 4
1182 PI_8-1.SELECTED_FREQ Class_2 Variation 5 Variation 7
1183 PI_8-1.INPUT_STATUS Class_1 Variation 2 Variation 4
1184 PI_8-2.SELECTED_FREQ Class_2 Variation 5 Variation 7
1185 PI_8-2.INPUT_STATUS Class_1 Variation 2 Variation 4
1186 PI_8-3.SELECTED_FREQ Class_2 Variation 5 Variation 7
1187 PI_8-3.INPUT_STATUS Class_1 Variation 2 Variation 4
1188 PI_8-4.SELECTED_FREQ Class_2 Variation 5 Variation 7
1189 PI_8-4.INPUT_STATUS Class_1 Variation 2 Variation 4
1190 PI_8-5.SELECTED_FREQ Class_2 Variation 5 Variation 7
1191 PI_8-5.INPUT_STATUS Class_1 Variation 2 Variation 4
DNP3 Data Point List 65
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1192 PI_8-6.SELECTED_FREQ Class_2 Variation 5 Variation 7
1193 PI_8-6.INPUT_STATUS Class_1 Variation 2 Variation 4
1194 PI_8-7.SELECTED_FREQ Class_2 Variation 5 Variation 7
1195 PI_8-7.INPUT_STATUS Class_1 Variation 2 Variation 4
1196 PI_8-8.SELECTED_FREQ Class_2 Variation 5 Variation 7
1197 PI_8-8.INPUT_STATUS Class_1 Variation 2 Variation 4
1198 AO_2-1.SELECTED Class_2 Variation 5 Variation 7
1199 AO_2-1.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1200 AO_2-2.SELECTED Class_2 Variation 5 Variation 7
1201 AO_2-2.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1202 AO_3-1.SELECTED Class_2 Variation 5 Variation 7
1203 AO_3-1.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1204 AO_3-2.SELECTED Class_2 Variation 5 Variation 7
1205 AO_3-2.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1206 AO_4-1.SELECTED Class_2 Variation 5 Variation 7
1207 AO_4-1.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1208 AO_4-2.SELECTED Class_2 Variation 5 Variation 7
1209 AO_4-2.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1210 AO_5-1.SELECTED Class_2 Variation 5 Variation 7
1211 AO_5-1.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1212 AO_5-2.SELECTED Class_2 Variation 5 Variation 7
1213 AO_5-2.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1214 AO_6-1.SELECTED Class_2 Variation 5 Variation 7
1215 AO_6-1.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1216 AO_6-2.SELECTED Class_2 Variation 5 Variation 7
1217 AO_6-2.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1218 AO_7-1.SELECTED Class_2 Variation 5 Variation 7
1219 AO_7-1.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1220 AO_7-2.SELECTED Class_2 Variation 5 Variation 7
1221 AO_7-2.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1222 AO_8-1.SELECTED Class_2 Variation 5 Variation 7
1223 AO_8-1.OUTPUT_STATUS Class_1 Variation 2 Variation 4
66 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1224 AO_8-2.SELECTED Class_2 Variation 5 Variation 7
1225 AO_8-2.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1226 DO_2-1.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1227 DO_2-2.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1228 DO_3-1.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1229 DO_3-2.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1230 DO_4-1.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1231 DO_4-2.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1232 DO_5-1.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1233 DO_5-2.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1234 DO_6-1.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1235 DO_6-2.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1236 DO_7-1.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1237 DO_7-2.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1238 DO_8-1.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1239 DO_8-2.OUTPUT_STATUS Class_1 Variation 2 Variation 4
1240 PID_1.P_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1241 PID_1.O_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1242 PID_1.SELECTED_LOOP Class_3 Variation 2 Variation 4
1243 PID_2.P_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1244 PID_2.O_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1245 PID_2.SELECTED_LOOP Class_3 Variation 2 Variation 4
1246 PID_3.P_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1247 PID_3.O_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1248 PID_3.SELECTED_LOOP Class_3 Variation 2 Variation 4
1249 PID_4.P_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1250 PID_4.O_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1251 PID_4.SELECTED_LOOP Class_3 Variation 2 Variation 4
1252 PID_5.P_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1253 PID_5.O_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1254 PID_5.SELECTED_LOOP Class_3 Variation 2 Variation 4
1255 PID_6.P_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
DNP3 Data Point List 67
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1256 PID_6.O_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1257 PID_6.SELECTED_LOOP Class_3 Variation 2 Variation 4
1258 PID_7.P_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1259 PID_7.O_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1260 PID_7.SELECTED_LOOP Class_3 Variation 2 Variation 4
1261 PID_8.P_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1262 PID_8.O_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1263 PID_8.SELECTED_LOOP Class_3 Variation 2 Variation 4
1264 PID_9.P_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1265 PID_9.O_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1266 PID_9.SELECTED_LOOP Class_3 Variation 2 Variation 4
1267 PID_10.P_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1268 PID_10.O_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1269 PID_10.SELECTED_LOOP Class_3 Variation 2 Variation 4
1270 PID_11.P_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1271 PID_11.O_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1272 PID_11.SELECTED_LOOP Class_3 Variation 2 Variation 4
1273 PID_12.P_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1274 PID_12.O_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1275 PID_12.SELECTED_LOOP Class_3 Variation 2 Variation 4
1276 PID_13.P_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1277 PID_13.O_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1278 PID_13.SELECTED_LOOP Class_3 Variation 2 Variation 4
1279 PID_14.P_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1280 PID_14.O_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1281 PID_14.SELECTED_LOOP Class_3 Variation 2 Variation 4
1282 PID_15.P_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1283 PID_15.O_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1284 PID_15.SELECTED_LOOP Class_3 Variation 2 Variation 4
1285 PID_16.P_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1286 PID_16.O_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1287 PID_16.SELECTED_LOOP Class_3 Variation 2 Variation 4
68 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1288 PID_17.P_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1289 PID_17.O_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1290 PID_17.SELECTED_LOOP Class_3 Variation 2 Variation 4
1291 PID_18.P_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1292 PID_18.O_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1293 PID_18.SELECTED_LOOP Class_3 Variation 2 Variation 4
1294 PID_19.P_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1295 PID_19.O_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1296 PID_19.SELECTED_LOOP Class_3 Variation 2 Variation 4
1297 PID_20.P_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1298 PID_20.O_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1299 PID_20.SELECTED_LOOP Class_3 Variation 2 Variation 4
1300 PID_21.P_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1301 PID_21.O_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1302 PID_21.SELECTED_LOOP Class_3 Variation 2 Variation 4
1303 PID_22.P_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1304 PID_22.O_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1305 PID_22.SELECTED_LOOP Class_3 Variation 2 Variation 4
1306 PID_23.P_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1307 PID_23.O_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1308 PID_23.SELECTED_LOOP Class_3 Variation 2 Variation 4
1309 PID_24.P_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1310 PID_24.O_PROCESS_VARIABLE Class_2 Variation 5 Variation 7
1311 PID_24.SELECTED_LOOP Class_3 Variation 2 Variation 4
1312 Components_1.C1_LIVE Class_3 Variation 6 Variation 8
1313 Components_1.N2_LIVE Class_3 Variation 6 Variation 8
1314 Components_1.CO2_LIVE Class_3 Variation 6 Variation 8
1315 Components_1.C2_LIVE Class_3 Variation 6 Variation 8
1316 Components_1.C3_LIVE Class_3 Variation 6 Variation 8
1317 Components_1.H2O_LIVE Class_3 Variation 6 Variation 8
1318 Components_1.H2S_LIVE Class_3 Variation 6 Variation 8
1319 Components_1.H2_LIVE Class_3 Variation 6 Variation 8
DNP3 Data Point List 69
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1320 Components_1.CO_LIVE Class_3 Variation 6 Variation 8
1321 Components_1.O2_LIVE Class_3 Variation 6 Variation 8
1322 Components_1.IC4_LIVE Class_3 Variation 6 Variation 8
1323 Components_1.NC4_LIVE Class_3 Variation 6 Variation 8
1324 Components_1.IC5_LIVE Class_3 Variation 6 Variation 8
1325 Components_1.NC5_LIVE Class_3 Variation 6 Variation 8
1326 Components_1.C6_LIVE Class_3 Variation 6 Variation 8
1327 Components_1.C7_LIVE Class_3 Variation 6 Variation 8
1328 Components_1.C8_LIVE Class_3 Variation 6 Variation 8
1329 Components_1.C9_LIVE Class_3 Variation 6 Variation 8
1330 Components_1.C10_LIVE Class_3 Variation 6 Variation 8
1331 Components_1.HE_LIVE Class_3 Variation 6 Variation 8
1332 Components_1.AR_LIVE Class_3 Variation 6 Variation 8
1333 Components_1.NEOC5_LIVE Class_3 Variation 6 Variation 8
1334 Components_1.BENZENE_LIVE Class_3 Variation 6 Variation 8
1335 Components_1.TOLUENE_LIVE Class_3 Variation 6 Variation 8
1336 Components_2.C1_LIVE Class_3 Variation 6 Variation 8
1337 Components_2.N2_LIVE Class_3 Variation 6 Variation 8
1338 Components_2.CO2_LIVE Class_3 Variation 6 Variation 8
1339 Components_2.C2_LIVE Class_3 Variation 6 Variation 8
1340 Components_2.C3_LIVE Class_3 Variation 6 Variation 8
1341 Components_2.H2O_LIVE Class_3 Variation 6 Variation 8
1342 Components_2.H2S_LIVE Class_3 Variation 6 Variation 8
1343 Components_2.H2_LIVE Class_3 Variation 6 Variation 8
1344 Components_2.CO_LIVE Class_3 Variation 6 Variation 8
1345 Components_2.O2_LIVE Class_3 Variation 6 Variation 8
1346 Components_2.IC4_LIVE Class_3 Variation 6 Variation 8
1347 Components_2.NC4_LIVE Class_3 Variation 6 Variation 8
1348 Components_2.IC5_LIVE Class_3 Variation 6 Variation 8
1349 Components_2.NC5_LIVE Class_3 Variation 6 Variation 8
1350 Components_2.C6_LIVE Class_3 Variation 6 Variation 8
1351 Components_2.C7_LIVE Class_3 Variation 6 Variation 8
70 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1352 Components_2.C8_LIVE Class_3 Variation 6 Variation 8
1353 Components_2.C9_LIVE Class_3 Variation 6 Variation 8
1354 Components_2.C10_LIVE Class_3 Variation 6 Variation 8
1355 Components_2.HE_LIVE Class_3 Variation 6 Variation 8
1356 Components_2.AR_LIVE Class_3 Variation 6 Variation 8
1357 Components_2.NEOC5_LIVE Class_3 Variation 6 Variation 8
1358 Components_2.BENZENE_LIVE Class_3 Variation 6 Variation 8
1359 Components_2.TOLUENE_LIVE Class_3 Variation 6 Variation 8
1360 Components_3.C1_LIVE Class_3 Variation 6 Variation 8
1361 Components_3.N2_LIVE Class_3 Variation 6 Variation 8
1362 Components_3.CO2_LIVE Class_3 Variation 6 Variation 8
1363 Components_3.C2_LIVE Class_3 Variation 6 Variation 8
1364 Components_3.C3_LIVE Class_3 Variation 6 Variation 8
1365 Components_3.H2O_LIVE Class_3 Variation 6 Variation 8
1366 Components_3.H2S_LIVE Class_3 Variation 6 Variation 8
1367 Components_3.H2_LIVE Class_3 Variation 6 Variation 8
1368 Components_3.CO_LIVE Class_3 Variation 6 Variation 8
1369 Components_3.O2_LIVE Class_3 Variation 6 Variation 8
1370 Components_3.IC4_LIVE Class_3 Variation 6 Variation 8
1371 Components_3.NC4_LIVE Class_3 Variation 6 Variation 8
1372 Components_3.IC5_LIVE Class_3 Variation 6 Variation 8
1373 Components_3.NC5_LIVE Class_3 Variation 6 Variation 8
1374 Components_3.C6_LIVE Class_3 Variation 6 Variation 8
1375 Components_3.C7_LIVE Class_3 Variation 6 Variation 8
1376 Components_3.C8_LIVE Class_3 Variation 6 Variation 8
1377 Components_3.C9_LIVE Class_3 Variation 6 Variation 8
1378 Components_3.C10_LIVE Class_3 Variation 6 Variation 8
1379 Components_3.HE_LIVE Class_3 Variation 6 Variation 8
1380 Components_3.AR_LIVE Class_3 Variation 6 Variation 8
1381 Components_3.NEOC5_LIVE Class_3 Variation 6 Variation 8
1382 Components_3.BENZENE_LIVE Class_3 Variation 6 Variation 8
1383 Components_3.TOLUENE_LIVE Class_3 Variation 6 Variation 8
DNP3 Data Point List 71
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1384 Components_4.C1_LIVE Class_3 Variation 6 Variation 8
1385 Components_4.N2_LIVE Class_3 Variation 6 Variation 8
1386 Components_4.CO2_LIVE Class_3 Variation 6 Variation 8
1387 Components_4.C2_LIVE Class_3 Variation 6 Variation 8
1388 Components_4.C3_LIVE Class_3 Variation 6 Variation 8
1389 Components_4.H2O_LIVE Class_3 Variation 6 Variation 8
1390 Components_4.H2S_LIVE Class_3 Variation 6 Variation 8
1391 Components_4.H2_LIVE Class_3 Variation 6 Variation 8
1392 Components_4.CO_LIVE Class_3 Variation 6 Variation 8
1393 Components_4.O2_LIVE Class_3 Variation 6 Variation 8
1394 Components_4.IC4_LIVE Class_3 Variation 6 Variation 8
1395 Components_4.NC4_LIVE Class_3 Variation 6 Variation 8
1396 Components_4.IC5_LIVE Class_3 Variation 6 Variation 8
1397 Components_4.NC5_LIVE Class_3 Variation 6 Variation 8
1398 Components_4.C6_LIVE Class_3 Variation 6 Variation 8
1399 Components_4.C7_LIVE Class_3 Variation 6 Variation 8
1400 Components_4.C8_LIVE Class_3 Variation 6 Variation 8
1401 Components_4.C9_LIVE Class_3 Variation 6 Variation 8
1402 Components_4.C10_LIVE Class_3 Variation 6 Variation 8
1403 Components_4.HE_LIVE Class_3 Variation 6 Variation 8
1404 Components_4.AR_LIVE Class_3 Variation 6 Variation 8
1405 Components_4.NEOC5_LIVE Class_3 Variation 6 Variation 8
1406 Components_4.BENZENE_LIVE Class_3 Variation 6 Variation 8
1407 Components_4.TOLUENE_LIVE Class_3 Variation 6 Variation 8
1408 Components_5.C1_LIVE Class_3 Variation 6 Variation 8
1409 Components_5.N2_LIVE Class_3 Variation 6 Variation 8
1410 Components_5.CO2_LIVE Class_3 Variation 6 Variation 8
1411 Components_5.C2_LIVE Class_3 Variation 6 Variation 8
1412 Components_5.C3_LIVE Class_3 Variation 6 Variation 8
1413 Components_5.H2O_LIVE Class_3 Variation 6 Variation 8
1414 Components_5.H2S_LIVE Class_3 Variation 6 Variation 8
1415 Components_5.H2_LIVE Class_3 Variation 6 Variation 8
72 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1416 Components_5.CO_LIVE Class_3 Variation 6 Variation 8
1417 Components_5.O2_LIVE Class_3 Variation 6 Variation 8
1418 Components_5.IC4_LIVE Class_3 Variation 6 Variation 8
1419 Components_5.NC4_LIVE Class_3 Variation 6 Variation 8
1420 Components_5.IC5_LIVE Class_3 Variation 6 Variation 8
1421 Components_5.NC5_LIVE Class_3 Variation 6 Variation 8
1422 Components_5.C6_LIVE Class_3 Variation 6 Variation 8
1423 Components_5.C7_LIVE Class_3 Variation 6 Variation 8
1424 Components_5.C8_LIVE Class_3 Variation 6 Variation 8
1425 Components_5.C9_LIVE Class_3 Variation 6 Variation 8
1426 Components_5.C10_LIVE Class_3 Variation 6 Variation 8
1427 Components_5.HE_LIVE Class_3 Variation 6 Variation 8
1428 Components_5.AR_LIVE Class_3 Variation 6 Variation 8
1429 Components_5.NEOC5_LIVE Class_3 Variation 6 Variation 8
1430 Components_5.BENZENE_LIVE Class_3 Variation 6 Variation 8
1431 Components_5.TOLUENE_LIVE Class_3 Variation 6 Variation 8
1432 Components_6.C1_LIVE Class_3 Variation 6 Variation 8
1433 Components_6.N2_LIVE Class_3 Variation 6 Variation 8
1434 Components_6.CO2_LIVE Class_3 Variation 6 Variation 8
1435 Components_6.C2_LIVE Class_3 Variation 6 Variation 8
1436 Components_6.C3_LIVE Class_3 Variation 6 Variation 8
1437 Components_6.H2O_LIVE Class_3 Variation 6 Variation 8
1438 Components_6.H2S_LIVE Class_3 Variation 6 Variation 8
1439 Components_6.H2_LIVE Class_3 Variation 6 Variation 8
1440 Components_6.CO_LIVE Class_3 Variation 6 Variation 8
1441 Components_6.O2_LIVE Class_3 Variation 6 Variation 8
1442 Components_6.IC4_LIVE Class_3 Variation 6 Variation 8
1443 Components_6.NC4_LIVE Class_3 Variation 6 Variation 8
1444 Components_6.IC5_LIVE Class_3 Variation 6 Variation 8
1445 Components_6.NC5_LIVE Class_3 Variation 6 Variation 8
1446 Components_6.C6_LIVE Class_3 Variation 6 Variation 8
1447 Components_6.C7_LIVE Class_3 Variation 6 Variation 8
DNP3 Data Point List 73
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1448 Components_6.C8_LIVE Class_3 Variation 6 Variation 8
1449 Components_6.C9_LIVE Class_3 Variation 6 Variation 8
1450 Components_6.C10_LIVE Class_3 Variation 6 Variation 8
1451 Components_6.HE_LIVE Class_3 Variation 6 Variation 8
1452 Components_6.AR_LIVE Class_3 Variation 6 Variation 8
1453 Components_6.NEOC5_LIVE Class_3 Variation 6 Variation 8
1454 Components_6.BENZENE_LIVE Class_3 Variation 6 Variation 8
1455 Components_6.TOLUENE_LIVE Class_3 Variation 6 Variation 8
1456 Components_7.C1_LIVE Class_3 Variation 6 Variation 8
1457 Components_7.N2_LIVE Class_3 Variation 6 Variation 8
1458 Components_7.CO2_LIVE Class_3 Variation 6 Variation 8
1459 Components_7.C2_LIVE Class_3 Variation 6 Variation 8
1460 Components_7.C3_LIVE Class_3 Variation 6 Variation 8
1461 Components_7.H2O_LIVE Class_3 Variation 6 Variation 8
1462 Components_7.H2S_LIVE Class_3 Variation 6 Variation 8
1463 Components_7.H2_LIVE Class_3 Variation 6 Variation 8
1464 Components_7.CO_LIVE Class_3 Variation 6 Variation 8
1465 Components_7.O2_LIVE Class_3 Variation 6 Variation 8
1466 Components_7.IC4_LIVE Class_3 Variation 6 Variation 8
1467 Components_7.NC4_LIVE Class_3 Variation 6 Variation 8
1468 Components_7.IC5_LIVE Class_3 Variation 6 Variation 8
1469 Components_7.NC5_LIVE Class_3 Variation 6 Variation 8
1470 Components_7.C6_LIVE Class_3 Variation 6 Variation 8
1471 Components_7.C7_LIVE Class_3 Variation 6 Variation 8
1472 Components_7.C8_LIVE Class_3 Variation 6 Variation 8
1473 Components_7.C9_LIVE Class_3 Variation 6 Variation 8
1474 Components_7.C10_LIVE Class_3 Variation 6 Variation 8
1475 Components_7.HE_LIVE Class_3 Variation 6 Variation 8
1476 Components_7.AR_LIVE Class_3 Variation 6 Variation 8
1477 Components_7.NEOC5_LIVE Class_3 Variation 6 Variation 8
1478 Components_7.BENZENE_LIVE Class_3 Variation 6 Variation 8
1479 Components_7.TOLUENE_LIVE Class_3 Variation 6 Variation 8
74 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1480 Components_8.C1_LIVE Class_3 Variation 6 Variation 8
1481 Components_8.N2_LIVE Class_3 Variation 6 Variation 8
1482 Components_8.CO2_LIVE Class_3 Variation 6 Variation 8
1483 Components_8.C2_LIVE Class_3 Variation 6 Variation 8
1484 Components_8.C3_LIVE Class_3 Variation 6 Variation 8
1485 Components_8.H2O_LIVE Class_3 Variation 6 Variation 8
1486 Components_8.H2S_LIVE Class_3 Variation 6 Variation 8
1487 Components_8.H2_LIVE Class_3 Variation 6 Variation 8
1488 Components_8.CO_LIVE Class_3 Variation 6 Variation 8
1489 Components_8.O2_LIVE Class_3 Variation 6 Variation 8
1490 Components_8.IC4_LIVE Class_3 Variation 6 Variation 8
1491 Components_8.NC4_LIVE Class_3 Variation 6 Variation 8
1492 Components_8.IC5_LIVE Class_3 Variation 6 Variation 8
1493 Components_8.NC5_LIVE Class_3 Variation 6 Variation 8
1494 Components_8.C6_LIVE Class_3 Variation 6 Variation 8
1495 Components_8.C7_LIVE Class_3 Variation 6 Variation 8
1496 Components_8.C8_LIVE Class_3 Variation 6 Variation 8
1497 Components_8.C9_LIVE Class_3 Variation 6 Variation 8
1498 Components_8.C10_LIVE Class_3 Variation 6 Variation 8
1499 Components_8.HE_LIVE Class_3 Variation 6 Variation 8
1500 Components_8.AR_LIVE Class_3 Variation 6 Variation 8
1501 Components_8.NEOC5_LIVE Class_3 Variation 6 Variation 8
1502 Components_8.BENZENE_LIVE Class_3 Variation 6 Variation 8
1503 Components_8.TOLUENE_LIVE Class_3 Variation 6 Variation 8
1504 Components_9.C1_LIVE Class_3 Variation 6 Variation 8
1505 Components_9.N2_LIVE Class_3 Variation 6 Variation 8
1506 Components_9.CO2_LIVE Class_3 Variation 6 Variation 8
1507 Components_9.C2_LIVE Class_3 Variation 6 Variation 8
1508 Components_9.C3_LIVE Class_3 Variation 6 Variation 8
1509 Components_9.H2O_LIVE Class_3 Variation 6 Variation 8
1510 Components_9.H2S_LIVE Class_3 Variation 6 Variation 8
1511 Components_9.H2_LIVE Class_3 Variation 6 Variation 8
DNP3 Data Point List 75
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1512 Components_9.CO_LIVE Class_3 Variation 6 Variation 8
1513 Components_9.O2_LIVE Class_3 Variation 6 Variation 8
1514 Components_9.IC4_LIVE Class_3 Variation 6 Variation 8
1515 Components_9.NC4_LIVE Class_3 Variation 6 Variation 8
1516 Components_9.IC5_LIVE Class_3 Variation 6 Variation 8
1517 Components_9.NC5_LIVE Class_3 Variation 6 Variation 8
1518 Components_9.C6_LIVE Class_3 Variation 6 Variation 8
1519 Components_9.C7_LIVE Class_3 Variation 6 Variation 8
1520 Components_9.C8_LIVE Class_3 Variation 6 Variation 8
1521 Components_9.C9_LIVE Class_3 Variation 6 Variation 8
1522 Components_9.C10_LIVE Class_3 Variation 6 Variation 8
1523 Components_9.HE_LIVE Class_3 Variation 6 Variation 8
1524 Components_9.AR_LIVE Class_3 Variation 6 Variation 8
1525 Components_9.NEOC5_LIVE Class_3 Variation 6 Variation 8
1526 Components_9.BENZENE_LIVE Class_3 Variation 6 Variation 8
1527 Components_9.TOLUENE_LIVE Class_3 Variation 6 Variation 8
1528 Components_10.C1_LIVE Class_3 Variation 6 Variation 8
1529 Components_10.N2_LIVE Class_3 Variation 6 Variation 8
1530 Components_10.CO2_LIVE Class_3 Variation 6 Variation 8
1531 Components_10.C2_LIVE Class_3 Variation 6 Variation 8
1532 Components_10.C3_LIVE Class_3 Variation 6 Variation 8
1533 Components_10.H2O_LIVE Class_3 Variation 6 Variation 8
1534 Components_10.H2S_LIVE Class_3 Variation 6 Variation 8
1535 Components_10.H2_LIVE Class_3 Variation 6 Variation 8
1536 Components_10.CO_LIVE Class_3 Variation 6 Variation 8
1537 Components_10.O2_LIVE Class_3 Variation 6 Variation 8
1538 Components_10.IC4_LIVE Class_3 Variation 6 Variation 8
1539 Components_10.NC4_LIVE Class_3 Variation 6 Variation 8
1540 Components_10.IC5_LIVE Class_3 Variation 6 Variation 8
1541 Components_10.NC5_LIVE Class_3 Variation 6 Variation 8
1542 Components_10.C6_LIVE Class_3 Variation 6 Variation 8
1543 Components_10.C7_LIVE Class_3 Variation 6 Variation 8
76 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1544 Components_10.C8_LIVE Class_3 Variation 6 Variation 8
1545 Components_10.C9_LIVE Class_3 Variation 6 Variation 8
1546 Components_10.C10_LIVE Class_3 Variation 6 Variation 8
1547 Components_10.HE_LIVE Class_3 Variation 6 Variation 8
1548 Components_10.AR_LIVE Class_3 Variation 6 Variation 8
1549 Components_10.NEOC5_LIVE Class_3 Variation 6 Variation 8
1550 Components_10.BENZENE_LIVE Class_3 Variation 6 Variation 8
1551 Components_10.TOLUENE_LIVE Class_3 Variation 6 Variation 8
1552 Components_11.C1_LIVE Class_3 Variation 6 Variation 8
1553 Components_11.N2_LIVE Class_3 Variation 6 Variation 8
1554 Components_11.CO2_LIVE Class_3 Variation 6 Variation 8
1555 Components_11.C2_LIVE Class_3 Variation 6 Variation 8
1556 Components_11.C3_LIVE Class_3 Variation 6 Variation 8
1557 Components_11.H2O_LIVE Class_3 Variation 6 Variation 8
1558 Components_11.H2S_LIVE Class_3 Variation 6 Variation 8
1559 Components_11.H2_LIVE Class_3 Variation 6 Variation 8
1560 Components_11.CO_LIVE Class_3 Variation 6 Variation 8
1561 Components_11.O2_LIVE Class_3 Variation 6 Variation 8
1562 Components_11.IC4_LIVE Class_3 Variation 6 Variation 8
1563 Components_11.NC4_LIVE Class_3 Variation 6 Variation 8
1564 Components_11.IC5_LIVE Class_3 Variation 6 Variation 8
1565 Components_11.NC5_LIVE Class_3 Variation 6 Variation 8
1566 Components_11.C6_LIVE Class_3 Variation 6 Variation 8
1567 Components_11.C7_LIVE Class_3 Variation 6 Variation 8
1568 Components_11.C8_LIVE Class_3 Variation 6 Variation 8
1569 Components_11.C9_LIVE Class_3 Variation 6 Variation 8
1570 Components_11.C10_LIVE Class_3 Variation 6 Variation 8
1571 Components_11.HE_LIVE Class_3 Variation 6 Variation 8
1572 Components_11.AR_LIVE Class_3 Variation 6 Variation 8
1573 Components_11.NEOC5_LIVE Class_3 Variation 6 Variation 8
1574 Components_11.BENZENE_LIVE Class_3 Variation 6 Variation 8
1575 Components_11.TOLUENE_LIVE Class_3 Variation 6 Variation 8
DNP3 Data Point List 77
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1576 Components_12.C1_LIVE Class_3 Variation 6 Variation 8
1577 Components_12.N2_LIVE Class_3 Variation 6 Variation 8
1578 Components_12.CO2_LIVE Class_3 Variation 6 Variation 8
1579 Components_12.C2_LIVE Class_3 Variation 6 Variation 8
1580 Components_12.C3_LIVE Class_3 Variation 6 Variation 8
1581 Components_12.H2O_LIVE Class_3 Variation 6 Variation 8
1582 Components_12.H2S_LIVE Class_3 Variation 6 Variation 8
1583 Components_12.H2_LIVE Class_3 Variation 6 Variation 8
1584 Components_12.CO_LIVE Class_3 Variation 6 Variation 8
1585 Components_12.O2_LIVE Class_3 Variation 6 Variation 8
1586 Components_12.IC4_LIVE Class_3 Variation 6 Variation 8
1587 Components_12.NC4_LIVE Class_3 Variation 6 Variation 8
1588 Components_12.IC5_LIVE Class_3 Variation 6 Variation 8
1589 Components_12.NC5_LIVE Class_3 Variation 6 Variation 8
1590 Components_12.C6_LIVE Class_3 Variation 6 Variation 8
1591 Components_12.C7_LIVE Class_3 Variation 6 Variation 8
1592 Components_12.C8_LIVE Class_3 Variation 6 Variation 8
1593 Components_12.C9_LIVE Class_3 Variation 6 Variation 8
1594 Components_12.C10_LIVE Class_3 Variation 6 Variation 8
1595 Components_12.HE_LIVE Class_3 Variation 6 Variation 8
1596 Components_12.AR_LIVE Class_3 Variation 6 Variation 8
1597 Components_12.NEOC5_LIVE Class_3 Variation 6 Variation 8
1598 Components_12.BENZENE_LIVE Class_3 Variation 6 Variation 8
1599 Components_12.TOLUENE_LIVE Class_3 Variation 6 Variation 8
1600 Components_13.C1_LIVE Class_3 Variation 6 Variation 8
1601 Components_13.N2_LIVE Class_3 Variation 6 Variation 8
1602 Components_13.CO2_LIVE Class_3 Variation 6 Variation 8
1603 Components_13.C2_LIVE Class_3 Variation 6 Variation 8
1604 Components_13.C3_LIVE Class_3 Variation 6 Variation 8
1605 Components_13.H2O_LIVE Class_3 Variation 6 Variation 8
1606 Components_13.H2S_LIVE Class_3 Variation 6 Variation 8
1607 Components_13.H2_LIVE Class_3 Variation 6 Variation 8
78 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1608 Components_13.CO_LIVE Class_3 Variation 6 Variation 8
1609 Components_13.O2_LIVE Class_3 Variation 6 Variation 8
1610 Components_13.IC4_LIVE Class_3 Variation 6 Variation 8
1611 Components_13.NC4_LIVE Class_3 Variation 6 Variation 8
1612 Components_13.IC5_LIVE Class_3 Variation 6 Variation 8
1613 Components_13.NC5_LIVE Class_3 Variation 6 Variation 8
1614 Components_13.C6_LIVE Class_3 Variation 6 Variation 8
1615 Components_13.C7_LIVE Class_3 Variation 6 Variation 8
1616 Components_13.C8_LIVE Class_3 Variation 6 Variation 8
1617 Components_13.C9_LIVE Class_3 Variation 6 Variation 8
1618 Components_13.C10_LIVE Class_3 Variation 6 Variation 8
1619 Components_13.HE_LIVE Class_3 Variation 6 Variation 8
1620 Components_13.AR_LIVE Class_3 Variation 6 Variation 8
1621 Components_13.NEOC5_LIVE Class_3 Variation 6 Variation 8
1622 Components_13.BENZENE_LIVE Class_3 Variation 6 Variation 8
1623 Components_13.TOLUENE_LIVE Class_3 Variation 6 Variation 8
1624 Components_14.C1_LIVE Class_3 Variation 6 Variation 8
1625 Components_14.N2_LIVE Class_3 Variation 6 Variation 8
1626 Components_14.CO2_LIVE Class_3 Variation 6 Variation 8
1627 Components_14.C2_LIVE Class_3 Variation 6 Variation 8
1628 Components_14.C3_LIVE Class_3 Variation 6 Variation 8
1629 Components_14.H2O_LIVE Class_3 Variation 6 Variation 8
1630 Components_14.H2S_LIVE Class_3 Variation 6 Variation 8
1631 Components_14.H2_LIVE Class_3 Variation 6 Variation 8
1632 Components_14.CO_LIVE Class_3 Variation 6 Variation 8
1633 Components_14.O2_LIVE Class_3 Variation 6 Variation 8
1634 Components_14.IC4_LIVE Class_3 Variation 6 Variation 8
1635 Components_14.NC4_LIVE Class_3 Variation 6 Variation 8
1636 Components_14.IC5_LIVE Class_3 Variation 6 Variation 8
1637 Components_14.NC5_LIVE Class_3 Variation 6 Variation 8
1638 Components_14.C6_LIVE Class_3 Variation 6 Variation 8
1639 Components_14.C7_LIVE Class_3 Variation 6 Variation 8
DNP3 Data Point List 79
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1640 Components_14.C8_LIVE Class_3 Variation 6 Variation 8
1641 Components_14.C9_LIVE Class_3 Variation 6 Variation 8
1642 Components_14.C10_LIVE Class_3 Variation 6 Variation 8
1643 Components_14.HE_LIVE Class_3 Variation 6 Variation 8
1644 Components_14.AR_LIVE Class_3 Variation 6 Variation 8
1645 Components_14.NEOC5_LIVE Class_3 Variation 6 Variation 8
1646 Components_14.BENZENE_LIVE Class_3 Variation 6 Variation 8
1647 Components_14.TOLUENE_LIVE Class_3 Variation 6 Variation 8
1648 Components_15.C1_LIVE Class_3 Variation 6 Variation 8
1649 Components_15.N2_LIVE Class_3 Variation 6 Variation 8
1650 Components_15.CO2_LIVE Class_3 Variation 6 Variation 8
1651 Components_15.C2_LIVE Class_3 Variation 6 Variation 8
1652 Components_15.C3_LIVE Class_3 Variation 6 Variation 8
1653 Components_15.H2O_LIVE Class_3 Variation 6 Variation 8
1654 Components_15.H2S_LIVE Class_3 Variation 6 Variation 8
1655 Components_15.H2_LIVE Class_3 Variation 6 Variation 8
1656 Components_15.CO_LIVE Class_3 Variation 6 Variation 8
1657 Components_15.O2_LIVE Class_3 Variation 6 Variation 8
1658 Components_15.IC4_LIVE Class_3 Variation 6 Variation 8
1659 Components_15.NC4_LIVE Class_3 Variation 6 Variation 8
1660 Components_15.IC5_LIVE Class_3 Variation 6 Variation 8
1661 Components_15.NC5_LIVE Class_3 Variation 6 Variation 8
1662 Components_15.C6_LIVE Class_3 Variation 6 Variation 8
1663 Components_15.C7_LIVE Class_3 Variation 6 Variation 8
1664 Components_15.C8_LIVE Class_3 Variation 6 Variation 8
1665 Components_15.C9_LIVE Class_3 Variation 6 Variation 8
1666 Components_15.C10_LIVE Class_3 Variation 6 Variation 8
1667 Components_15.HE_LIVE Class_3 Variation 6 Variation 8
1668 Components_15.AR_LIVE Class_3 Variation 6 Variation 8
1669 Components_15.NEOC5_LIVE Class_3 Variation 6 Variation 8
1670 Components_15.BENZENE_LIVE Class_3 Variation 6 Variation 8
1671 Components_15.TOLUENE_LIVE Class_3 Variation 6 Variation 8
80 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1672 Components_16.C1_LIVE Class_3 Variation 6 Variation 8
1673 Components_16.N2_LIVE Class_3 Variation 6 Variation 8
1674 Components_16.CO2_LIVE Class_3 Variation 6 Variation 8
1675 Components_16.C2_LIVE Class_3 Variation 6 Variation 8
1676 Components_16.C3_LIVE Class_3 Variation 6 Variation 8
1677 Components_16.H2O_LIVE Class_3 Variation 6 Variation 8
1678 Components_16.H2S_LIVE Class_3 Variation 6 Variation 8
1679 Components_16.H2_LIVE Class_3 Variation 6 Variation 8
1680 Components_16.CO_LIVE Class_3 Variation 6 Variation 8
1681 Components_16.O2_LIVE Class_3 Variation 6 Variation 8
1682 Components_16.IC4_LIVE Class_3 Variation 6 Variation 8
1683 Components_16.NC4_LIVE Class_3 Variation 6 Variation 8
1684 Components_16.IC5_LIVE Class_3 Variation 6 Variation 8
1685 Components_16.NC5_LIVE Class_3 Variation 6 Variation 8
1686 Components_16.C6_LIVE Class_3 Variation 6 Variation 8
1687 Components_16.C7_LIVE Class_3 Variation 6 Variation 8
1688 Components_16.C8_LIVE Class_3 Variation 6 Variation 8
1689 Components_16.C9_LIVE Class_3 Variation 6 Variation 8
1690 Components_16.C10_LIVE Class_3 Variation 6 Variation 8
1691 Components_16.HE_LIVE Class_3 Variation 6 Variation 8
1692 Components_16.AR_LIVE Class_3 Variation 6 Variation 8
1693 Components_16.NEOC5_LIVE Class_3 Variation 6 Variation 8
1694 Components_16.BENZENE_LIVE Class_3 Variation 6 Variation 8
1695 Components_16.TOLUENE_LIVE Class_3 Variation 6 Variation 8
1696 Components_17.C1_LIVE Class_3 Variation 6 Variation 8
1697 Components_17.N2_LIVE Class_3 Variation 6 Variation 8
1698 Components_17.CO2_LIVE Class_3 Variation 6 Variation 8
1699 Components_17.C2_LIVE Class_3 Variation 6 Variation 8
1700 Components_17.C3_LIVE Class_3 Variation 6 Variation 8
1701 Components_17.H2O_LIVE Class_3 Variation 6 Variation 8
1702 Components_17.H2S_LIVE Class_3 Variation 6 Variation 8
1703 Components_17.H2_LIVE Class_3 Variation 6 Variation 8
DNP3 Data Point List 81
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1704 Components_17.CO_LIVE Class_3 Variation 6 Variation 8
1705 Components_17.O2_LIVE Class_3 Variation 6 Variation 8
1706 Components_17.IC4_LIVE Class_3 Variation 6 Variation 8
1707 Components_17.NC4_LIVE Class_3 Variation 6 Variation 8
1708 Components_17.IC5_LIVE Class_3 Variation 6 Variation 8
1709 Components_17.NC5_LIVE Class_3 Variation 6 Variation 8
1710 Components_17.C6_LIVE Class_3 Variation 6 Variation 8
1711 Components_17.C7_LIVE Class_3 Variation 6 Variation 8
1712 Components_17.C8_LIVE Class_3 Variation 6 Variation 8
1713 Components_17.C9_LIVE Class_3 Variation 6 Variation 8
1714 Components_17.C10_LIVE Class_3 Variation 6 Variation 8
1715 Components_17.HE_LIVE Class_3 Variation 6 Variation 8
1716 Components_17.AR_LIVE Class_3 Variation 6 Variation 8
1717 Components_17.NEOC5_LIVE Class_3 Variation 6 Variation 8
1718 Components_17.BENZENE_LIVE Class_3 Variation 6 Variation 8
1719 Components_17.TOLUENE_LIVE Class_3 Variation 6 Variation 8
1720 Components_18.C1_LIVE Class_3 Variation 6 Variation 8
1721 Components_18.N2_LIVE Class_3 Variation 6 Variation 8
1722 Components_18.CO2_LIVE Class_3 Variation 6 Variation 8
1723 Components_18.C2_LIVE Class_3 Variation 6 Variation 8
1724 Components_18.C3_LIVE Class_3 Variation 6 Variation 8
1725 Components_18.H2O_LIVE Class_3 Variation 6 Variation 8
1726 Components_18.H2S_LIVE Class_3 Variation 6 Variation 8
1727 Components_18.H2_LIVE Class_3 Variation 6 Variation 8
1728 Components_18.CO_LIVE Class_3 Variation 6 Variation 8
1729 Components_18.O2_LIVE Class_3 Variation 6 Variation 8
1730 Components_18.IC4_LIVE Class_3 Variation 6 Variation 8
1731 Components_18.NC4_LIVE Class_3 Variation 6 Variation 8
1732 Components_18.IC5_LIVE Class_3 Variation 6 Variation 8
1733 Components_18.NC5_LIVE Class_3 Variation 6 Variation 8
1734 Components_18.C6_LIVE Class_3 Variation 6 Variation 8
1735 Components_18.C7_LIVE Class_3 Variation 6 Variation 8
82 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1736 Components_18.C8_LIVE Class_3 Variation 6 Variation 8
1737 Components_18.C9_LIVE Class_3 Variation 6 Variation 8
1738 Components_18.C10_LIVE Class_3 Variation 6 Variation 8
1739 Components_18.HE_LIVE Class_3 Variation 6 Variation 8
1740 Components_18.AR_LIVE Class_3 Variation 6 Variation 8
1741 Components_18.NEOC5_LIVE Class_3 Variation 6 Variation 8
1742 Components_18.BENZENE_LIVE Class_3 Variation 6 Variation 8
1743 Components_18.TOLUENE_LIVE Class_3 Variation 6 Variation 8
1744 Components_19.C1_LIVE Class_3 Variation 6 Variation 8
1745 Components_19.N2_LIVE Class_3 Variation 6 Variation 8
1746 Components_19.CO2_LIVE Class_3 Variation 6 Variation 8
1747 Components_19.C2_LIVE Class_3 Variation 6 Variation 8
1748 Components_19.C3_LIVE Class_3 Variation 6 Variation 8
1749 Components_19.H2O_LIVE Class_3 Variation 6 Variation 8
1750 Components_19.H2S_LIVE Class_3 Variation 6 Variation 8
1751 Components_19.H2_LIVE Class_3 Variation 6 Variation 8
1752 Components_19.CO_LIVE Class_3 Variation 6 Variation 8
1753 Components_19.O2_LIVE Class_3 Variation 6 Variation 8
1754 Components_19.IC4_LIVE Class_3 Variation 6 Variation 8
1755 Components_19.NC4_LIVE Class_3 Variation 6 Variation 8
1756 Components_19.IC5_LIVE Class_3 Variation 6 Variation 8
1757 Components_19.NC5_LIVE Class_3 Variation 6 Variation 8
1758 Components_19.C6_LIVE Class_3 Variation 6 Variation 8
1759 Components_19.C7_LIVE Class_3 Variation 6 Variation 8
1760 Components_19.C8_LIVE Class_3 Variation 6 Variation 8
1761 Components_19.C9_LIVE Class_3 Variation 6 Variation 8
1762 Components_19.C10_LIVE Class_3 Variation 6 Variation 8
1763 Components_19.HE_LIVE Class_3 Variation 6 Variation 8
1764 Components_19.AR_LIVE Class_3 Variation 6 Variation 8
1765 Components_19.NEOC5_LIVE Class_3 Variation 6 Variation 8
1766 Components_19.BENZENE_LIVE Class_3 Variation 6 Variation 8
1767 Components_19.TOLUENE_LIVE Class_3 Variation 6 Variation 8
DNP3 Data Point List 83
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1768 Components_20.C1_LIVE Class_3 Variation 6 Variation 8
1769 Components_20.N2_LIVE Class_3 Variation 6 Variation 8
1770 Components_20.CO2_LIVE Class_3 Variation 6 Variation 8
1771 Components_20.C2_LIVE Class_3 Variation 6 Variation 8
1772 Components_20.C3_LIVE Class_3 Variation 6 Variation 8
1773 Components_20.H2O_LIVE Class_3 Variation 6 Variation 8
1774 Components_20.H2S_LIVE Class_3 Variation 6 Variation 8
1775 Components_20.H2_LIVE Class_3 Variation 6 Variation 8
1776 Components_20.CO_LIVE Class_3 Variation 6 Variation 8
1777 Components_20.O2_LIVE Class_3 Variation 6 Variation 8
1778 Components_20.IC4_LIVE Class_3 Variation 6 Variation 8
1779 Components_20.NC4_LIVE Class_3 Variation 6 Variation 8
1780 Components_20.IC5_LIVE Class_3 Variation 6 Variation 8
1781 Components_20.NC5_LIVE Class_3 Variation 6 Variation 8
1782 Components_20.C6_LIVE Class_3 Variation 6 Variation 8
1783 Components_20.C7_LIVE Class_3 Variation 6 Variation 8
1784 Components_20.C8_LIVE Class_3 Variation 6 Variation 8
1785 Components_20.C9_LIVE Class_3 Variation 6 Variation 8
1786 Components_20.C10_LIVE Class_3 Variation 6 Variation 8
1787 Components_20.HE_LIVE Class_3 Variation 6 Variation 8
1788 Components_20.AR_LIVE Class_3 Variation 6 Variation 8
1789 Components_20.NEOC5_LIVE Class_3 Variation 6 Variation 8
1790 Components_20.BENZENE_LIVE Class_3 Variation 6 Variation 8
1791 Components_20.TOLUENE_LIVE Class_3 Variation 6 Variation 8
1792 Components_21.C1_LIVE Class_3 Variation 6 Variation 8
1793 Components_21.N2_LIVE Class_3 Variation 6 Variation 8
1794 Components_21.CO2_LIVE Class_3 Variation 6 Variation 8
1795 Components_21.C2_LIVE Class_3 Variation 6 Variation 8
1796 Components_21.C3_LIVE Class_3 Variation 6 Variation 8
1797 Components_21.H2O_LIVE Class_3 Variation 6 Variation 8
1798 Components_21.H2S_LIVE Class_3 Variation 6 Variation 8
1799 Components_21.H2_LIVE Class_3 Variation 6 Variation 8
84 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1800 Components_21.CO_LIVE Class_3 Variation 6 Variation 8
1801 Components_21.O2_LIVE Class_3 Variation 6 Variation 8
1802 Components_21.IC4_LIVE Class_3 Variation 6 Variation 8
1803 Components_21.NC4_LIVE Class_3 Variation 6 Variation 8
1804 Components_21.IC5_LIVE Class_3 Variation 6 Variation 8
1805 Components_21.NC5_LIVE Class_3 Variation 6 Variation 8
1806 Components_21.C6_LIVE Class_3 Variation 6 Variation 8
1807 Components_21.C7_LIVE Class_3 Variation 6 Variation 8
1808 Components_21.C8_LIVE Class_3 Variation 6 Variation 8
1809 Components_21.C9_LIVE Class_3 Variation 6 Variation 8
1810 Components_21.C10_LIVE Class_3 Variation 6 Variation 8
1811 Components_21.HE_LIVE Class_3 Variation 6 Variation 8
1812 Components_21.AR_LIVE Class_3 Variation 6 Variation 8
1813 Components_21.NEOC5_LIVE Class_3 Variation 6 Variation 8
1814 Components_21.BENZENE_LIVE Class_3 Variation 6 Variation 8
1815 Components_21.TOLUENE_LIVE Class_3 Variation 6 Variation 8
1816 Components_22.C1_LIVE Class_3 Variation 6 Variation 8
1817 Components_22.N2_LIVE Class_3 Variation 6 Variation 8
1818 Components_22.CO2_LIVE Class_3 Variation 6 Variation 8
1819 Components_22.C2_LIVE Class_3 Variation 6 Variation 8
1820 Components_22.C3_LIVE Class_3 Variation 6 Variation 8
1821 Components_22.H2O_LIVE Class_3 Variation 6 Variation 8
1822 Components_22.H2S_LIVE Class_3 Variation 6 Variation 8
1823 Components_22.H2_LIVE Class_3 Variation 6 Variation 8
1824 Components_22.CO_LIVE Class_3 Variation 6 Variation 8
1825 Components_22.O2_LIVE Class_3 Variation 6 Variation 8
1826 Components_22.IC4_LIVE Class_3 Variation 6 Variation 8
1827 Components_22.NC4_LIVE Class_3 Variation 6 Variation 8
1828 Components_22.IC5_LIVE Class_3 Variation 6 Variation 8
1829 Components_22.NC5_LIVE Class_3 Variation 6 Variation 8
1830 Components_22.C6_LIVE Class_3 Variation 6 Variation 8
1831 Components_22.C7_LIVE Class_3 Variation 6 Variation 8
DNP3 Data Point List 85
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1832 Components_22.C8_LIVE Class_3 Variation 6 Variation 8
1833 Components_22.C9_LIVE Class_3 Variation 6 Variation 8
1834 Components_22.C10_LIVE Class_3 Variation 6 Variation 8
1835 Components_22.HE_LIVE Class_3 Variation 6 Variation 8
1836 Components_22.AR_LIVE Class_3 Variation 6 Variation 8
1837 Components_22.NEOC5_LIVE Class_3 Variation 6 Variation 8
1838 Components_22.BENZENE_LIVE Class_3 Variation 6 Variation 8
1839 Components_22.TOLUENE_LIVE Class_3 Variation 6 Variation 8
1840 Components_23.C1_LIVE Class_3 Variation 6 Variation 8
1841 Components_23.N2_LIVE Class_3 Variation 6 Variation 8
1842 Components_23.CO2_LIVE Class_3 Variation 6 Variation 8
1843 Components_23.C2_LIVE Class_3 Variation 6 Variation 8
1844 Components_23.C3_LIVE Class_3 Variation 6 Variation 8
1845 Components_23.H2O_LIVE Class_3 Variation 6 Variation 8
1846 Components_23.H2S_LIVE Class_3 Variation 6 Variation 8
1847 Components_23.H2_LIVE Class_3 Variation 6 Variation 8
1848 Components_23.CO_LIVE Class_3 Variation 6 Variation 8
1849 Components_23.O2_LIVE Class_3 Variation 6 Variation 8
1850 Components_23.IC4_LIVE Class_3 Variation 6 Variation 8
1851 Components_23.NC4_LIVE Class_3 Variation 6 Variation 8
1852 Components_23.IC5_LIVE Class_3 Variation 6 Variation 8
1853 Components_23.NC5_LIVE Class_3 Variation 6 Variation 8
1854 Components_23.C6_LIVE Class_3 Variation 6 Variation 8
1855 Components_23.C7_LIVE Class_3 Variation 6 Variation 8
1856 Components_23.C8_LIVE Class_3 Variation 6 Variation 8
1857 Components_23.C9_LIVE Class_3 Variation 6 Variation 8
1858 Components_23.C10_LIVE Class_3 Variation 6 Variation 8
1859 Components_23.HE_LIVE Class_3 Variation 6 Variation 8
1860 Components_23.AR_LIVE Class_3 Variation 6 Variation 8
1861 Components_23.NEOC5_LIVE Class_3 Variation 6 Variation 8
1862 Components_23.BENZENE_LIVE Class_3 Variation 6 Variation 8
1863 Components_23.TOLUENE_LIVE Class_3 Variation 6 Variation 8
86 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1864 Components_24.C1_LIVE Class_3 Variation 6 Variation 8
1865 Components_24.N2_LIVE Class_3 Variation 6 Variation 8
1866 Components_24.CO2_LIVE Class_3 Variation 6 Variation 8
1867 Components_24.C2_LIVE Class_3 Variation 6 Variation 8
1868 Components_24.C3_LIVE Class_3 Variation 6 Variation 8
1869 Components_24.H2O_LIVE Class_3 Variation 6 Variation 8
1870 Components_24.H2S_LIVE Class_3 Variation 6 Variation 8
1871 Components_24.H2_LIVE Class_3 Variation 6 Variation 8
1872 Components_24.CO_LIVE Class_3 Variation 6 Variation 8
1873 Components_24.O2_LIVE Class_3 Variation 6 Variation 8
1874 Components_24.IC4_LIVE Class_3 Variation 6 Variation 8
1875 Components_24.NC4_LIVE Class_3 Variation 6 Variation 8
1876 Components_24.IC5_LIVE Class_3 Variation 6 Variation 8
1877 Components_24.NC5_LIVE Class_3 Variation 6 Variation 8
1878 Components_24.C6_LIVE Class_3 Variation 6 Variation 8
1879 Components_24.C7_LIVE Class_3 Variation 6 Variation 8
1880 Components_24.C8_LIVE Class_3 Variation 6 Variation 8
1881 Components_24.C9_LIVE Class_3 Variation 6 Variation 8
1882 Components_24.C10_LIVE Class_3 Variation 6 Variation 8
1883 Components_24.HE_LIVE Class_3 Variation 6 Variation 8
1884 Components_24.AR_LIVE Class_3 Variation 6 Variation 8
1885 Components_24.NEOC5_LIVE Class_3 Variation 6 Variation 8
1886 Components_24.BENZENE_LIVE Class_3 Variation 6 Variation 8
1887 Components_24.TOLUENE_LIVE Class_3 Variation 6 Variation 8
1888 AppInfo_1.APP_STATUS Class_1 Variation 2 Variation 4
1889 AppInfo_1.APP_CODE Class_1 Variation 2 Variation 4
1890 AppInfo_2.APP_STATUS Class_1 Variation 2 Variation 4
1891 AppInfo_2.APP_CODE Class_1 Variation 2 Variation 4
1892 AppInfo_3.APP_STATUS Class_1 Variation 2 Variation 4
1893 AppInfo_3.APP_CODE Class_1 Variation 2 Variation 4
1894 AppInfo_4.APP_STATUS Class_1 Variation 2 Variation 4
1895 AppInfo_4.APP_CODE Class_1 Variation 2 Variation 4
DNP3 Data Point List 87
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Group 30 Group 32
Point Default Default Default
Index Tag Mapped Class Variation Variation
1896 AppInfo_5.APP_STATUS Class_1 Variation 2 Variation 4
1897 AppInfo_5.APP_CODE Class_1 Variation 2 Variation 4
1898 AppInfo_6.APP_STATUS Class_1 Variation 2 Variation 4
1899 AppInfo_6.APP_CODE Class_1 Variation 2 Variation 4
1900 AppInfo_7.APP_STATUS Class_1 Variation 2 Variation 4
1901 AppInfo_7.APP_CODE Class_1 Variation 2 Variation 4
1902 AppInfo_8.APP_STATUS Class_1 Variation 2 Variation 4
1903 AppInfo_8.APP_CODE Class_1 Variation 2 Variation 4
88 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
4.8 Analog Output: DNP3 Object Groups 40 (Status) & 41
(Commands)
4.8.1 DNP3 Object Group 40: Analog Output (Status)
This group can be read with the following variations:
▪ Variation 1: 32-bit with flag
▪ Variation 2: 16-bit with flag
▪ Variation 3: Single-precision floating point with flag
▪ Variation 4: Double-precision floating point with flag
4.8.2 DNP3 Object Group 41: Analog Output (Commands)
This group can be read with the following variations:
▪ Variation 1: Write 32-bit value
▪ Variation 2: Write 16-bit value
▪ Variation 3: Write single-precision floating point value
▪ Variation 4: Write double-precision floating point value
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
0 System_1.ACTIVE_DNP3_MAP Class_3 SelectOperate Variation 2 Variation 2
1 Mtr Setup_1.NUM_DPMTRS Class_3 SelectOperate Variation 2 Variation 2
2 Mtr Setup_1.NUM_LINMTRS Class_3 SelectOperate Variation 2 Variation 2
3 Mtr Setup_1. NUM_LIQLMTRS Class_3 SelectOperate Variation 2 Variation 2
4 AI_2-1.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
5 AI_2-2.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
6 AI_2-3.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
7 AI_2-4.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
8 AI_2-5.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
9 AI_2-6.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
10 AI_2-7.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
11 AI_2-8.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
12 AI_3-1.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
13 AI_3-2.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
14 AI_3-3.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
15 AI_3-4.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
16 AI_3-5.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
DNP3 Data Point List 89
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
17 AI_3-6.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
18 AI_3-7.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
19 AI_3-8.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
20 AI_4-1.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
21 AI_4-2.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
22 AI_4-3.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
23 AI_4-4.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
24 AI_4-5.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
25 AI_4-6.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
26 AI_4-7.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
27 AI_4-8.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
28 AI_5-1.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
29 AI_5-2.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
30 AI_5-3.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
31 AI_5-4.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
32 AI_5-5.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
33 AI_5-6.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
34 AI_5-7.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
35 AI_5-8.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
36 AI_6-1.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
37 AI_6-2.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
38 AI_6-3.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
39 AI_6-4.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
40 AI_6-5.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
41 AI_6-6.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
42 AI_6-7.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
43 AI_6-8.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
44 AI_7-1.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
45 AI_7-2.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
46 AI_7-3.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
47 AI_7-4.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
48 AI_7-5.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
90 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
49 AI_7-6.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
50 AI_7-7.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
51 AI_7-8.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
52 AI_8-1.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
53 AI_8-2.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
54 AI_8-3.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
55 AI_8-4.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
56 AI_8-5.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
57 AI_8-6.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
58 AI_8-7.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
59 AI_8-8.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
60 PI_2-1.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
61 PI_2-2.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
62 PI_2-3.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
63 PI_2-4.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
64 PI_2-5.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
65 PI_2-6.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
66 PI_2-7.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
67 PI_2-8.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
68 PI_3-1.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
69 PI_3-2.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
70 PI_3-3.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
71 PI_3-4.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
72 PI_3-5.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
73 PI_3-6.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
74 PI_3-7.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
75 PI_3-8.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
76 PI_4-1.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
77 PI_4-2.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
78 PI_4-3.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
79 PI_4-4.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
80 PI_4-5.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
DNP3 Data Point List 91
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
81 PI_4-6.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
82 PI_4-7.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
83 PI_4-8.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
84 PI_5-1.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
85 PI_5-2.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
86 PI_5-3.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
87 PI_5-4.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
88 PI_5-5.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
89 PI_5-6.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
90 PI_5-7.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
91 PI_5-8.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
92 PI_6-1.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
93 PI_6-2.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
94 PI_6-3.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
95 PI_6-4.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
96 PI_6-5.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
97 PI_6-6.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
98 PI_6-7.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
99 PI_6-8.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
100 PI_7-1.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
101 PI_7-2.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
102 PI_7-3.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
103 PI_7-4.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
104 PI_7-5.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
105 PI_7-6.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
106 PI_7-7.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
107 PI_7-8.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
108 PI_8-1.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
109 PI_8-2.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
110 PI_8-3.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
111 PI_8-4.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
112 PI_8-5.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
92 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
113 PI_8-6.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
114 PI_8-7.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
115 PI_8-8.OVRD_FREQ Class_2 SelectOperate Variation 3 Variation 3
116 AO_2-1.OVRD Class_2 SelectOperate Variation 3 Variation 3
117 AO_2-1.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
118 AO_2-1.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
119 AO_2-2.OVRD Class_2 SelectOperate Variation 3 Variation 3
120 AO_2-2.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
121 AO_2-2.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
122 AO_3-1.OVRD Class_2 SelectOperate Variation 3 Variation 3
123 AO_3-1.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
124 AO_3-1.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
125 AO_3-2.OVRD Class_2 SelectOperate Variation 3 Variation 3
126 AO_3-2.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
127 AO_3-2.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
128 AO_4-1.OVRD Class_2 SelectOperate Variation 3 Variation 3
129 AO_4-1.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
130 AO_4-1.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
131 AO_4-2.OVRD Class_2 SelectOperate Variation 3 Variation 3
132 AO_4-2.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
133 AO_4-2.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
134 AO_5-1.OVRD Class_2 SelectOperate Variation 3 Variation 3
135 AO_5-1.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
136 AO_5-1.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
137 AO_5-2.OVRD Class_2 SelectOperate Variation 3 Variation 3
138 AO_5-2.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
139 AO_5-2.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
140 AO_6-1.OVRD Class_2 SelectOperate Variation 3 Variation 3
141 AO_6-1.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
142 AO_6-1.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
143 AO_6-2.OVRD Class_2 SelectOperate Variation 3 Variation 3
144 AO_6-2.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
DNP3 Data Point List 93
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
145 AO_6-2.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
146 AO_7-1.OVRD Class_2 SelectOperate Variation 3 Variation 3
147 AO_7-1.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
148 AO_7-1.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
149 AO_7-2.OVRD Class_2 SelectOperate Variation 3 Variation 3
150 AO_7-2.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
151 AO_7-2.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
152 AO_8-1.OVRD Class_2 SelectOperate Variation 3 Variation 3
153 AO_8-1.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
154 AO_8-1.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
155 AO_8-2.OVRD Class_2 SelectOperate Variation 3 Variation 3
156 AO_8-2.UNITS_TYPE Class_3 SelectOperate Variation 2 Variation 2
157 AO_8-2.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
158 DO_2-1.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
159 DO_2-2.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
160 DO_3-1.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
161 DO_3-2.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
162 DO_4-1.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
163 DO_4-2.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
164 DO_5-1.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
165 DO_5-2.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
166 DO_6-1.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
167 DO_6-2.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
168 DO_7-1.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
169 DO_7-2.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
170 DO_8-1.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
171 DO_8-2.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
172 PID_1.PID_LOOP_TYPE Class_3 SelectOperate Variation 2 Variation 2
173 PID_1.P_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
174 PID_1.P_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
175 PID_1.P_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
176 PID_1.O_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
94 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
177 PID_1.O_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
178 PID_1.O_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
179 PID_1.P_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
180 PID_1.O_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
181 PID_2.PID_LOOP_TYPE Class_3 SelectOperate Variation 2 Variation 2
182 PID_2.P_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
183 PID_2.P_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
184 PID_2.P_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
185 PID_2.O_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
186 PID_2.O_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
187 PID_2.O_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
188 PID_2.P_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
189 PID_2.O_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
190 PID_3.PID_LOOP_TYPE Class_3 SelectOperate Variation 2 Variation 2
191 PID_3.P_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
192 PID_3.P_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
193 PID_3.P_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
194 PID_3.O_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
195 PID_3.O_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
196 PID_3.O_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
197 PID_3.P_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
198 PID_3.O_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
199 PID_4.PID_LOOP_TYPE Class_3 SelectOperate Variation 2 Variation 2
200 PID_4.P_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
201 PID_4.P_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
202 PID_4.P_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
203 PID_4.O_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
204 PID_4.O_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
205 PID_4.O_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
206 PID_4.P_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
207 PID_4.O_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
208 PID_5.PID_LOOP_TYPE Class_3 SelectOperate Variation 2 Variation 2
DNP3 Data Point List 95
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
209 PID_5.P_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
210 PID_5.P_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
211 PID_5.P_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
212 PID_5.O_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
213 PID_5.O_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
214 PID_5.O_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
215 PID_5.P_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
216 PID_5.O_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
217 PID_6.PID_LOOP_TYPE Class_3 SelectOperate Variation 2 Variation 2
218 PID_6.P_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
219 PID_6.P_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
220 PID_6.P_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
221 PID_6.O_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
222 PID_6.O_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
223 PID_6.O_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
224 PID_6.P_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
225 PID_6.O_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
226 PID_7.PID_LOOP_TYPE Class_3 SelectOperate Variation 2 Variation 2
227 PID_7.P_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
228 PID_7.P_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
229 PID_7.P_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
230 PID_7.O_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
231 PID_7.O_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
232 PID_7.O_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
233 PID_7.P_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
234 PID_7.O_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
235 PID_8.PID_LOOP_TYPE Class_3 SelectOperate Variation 2 Variation 2
236 PID_8.P_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
237 PID_8.P_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
238 PID_8.P_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
239 PID_8.O_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
240 PID_8.O_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
96 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
241 PID_8.O_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
242 PID_8.P_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
243 PID_8.O_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
244 PID_9.PID_LOOP_TYPE Class_3 SelectOperate Variation 2 Variation 2
245 PID_9.P_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
246 PID_9.P_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
247 PID_9.P_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
248 PID_9.O_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
249 PID_9.O_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
250 PID_9.O_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
251 PID_9.P_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
252 PID_9.O_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
253 PID_10.PID_LOOP_TYPE Class_3 SelectOperate Variation 2 Variation 2
254 PID_10.P_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
255 PID_10.P_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
256 PID_10.P_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
257 PID_10.O_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
258 PID_10.O_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
259 PID_10.O_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
260 PID_10.P_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
261 PID_10.O_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
262 PID_11.PID_LOOP_TYPE Class_3 SelectOperate Variation 2 Variation 2
263 PID_11.P_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
264 PID_11.P_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
265 PID_11.P_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
266 PID_11.O_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
267 PID_11.O_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
268 PID_11.O_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
269 PID_11.P_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
270 PID_11.O_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
271 PID_12.PID_LOOP_TYPE Class_3 SelectOperate Variation 2 Variation 2
272 PID_12.P_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
DNP3 Data Point List 97
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
273 PID_12.P_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
274 PID_12.P_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
275 PID_12.O_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
276 PID_12.O_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
277 PID_12.O_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
278 PID_12.P_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
279 PID_12.O_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
280 PID_13.PID_LOOP_TYPE Class_3 SelectOperate Variation 2 Variation 2
281 PID_13.P_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
282 PID_13.P_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
283 PID_13.P_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
284 PID_13.O_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
285 PID_13.O_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
286 PID_13.O_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
287 PID_13.P_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
288 PID_13.O_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
289 PID_14.PID_LOOP_TYPE Class_3 SelectOperate Variation 2 Variation 2
290 PID_14.P_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
291 PID_14.P_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
292 PID_14.P_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
293 PID_14.O_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
294 PID_14.O_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
295 PID_14.O_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
296 PID_14.P_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
297 PID_14.O_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
298 PID_15.PID_LOOP_TYPE Class_3 SelectOperate Variation 2 Variation 2
299 PID_15.P_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
300 PID_15.P_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
301 PID_15.P_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
302 PID_15.O_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
303 PID_15.O_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
304 PID_15.O_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
98 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
305 PID_15.P_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
306 PID_15.O_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
307 PID_16.PID_LOOP_TYPE Class_3 SelectOperate Variation 2 Variation 2
308 PID_16.P_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
309 PID_16.P_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
310 PID_16.P_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
311 PID_16.O_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
312 PID_16.O_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
313 PID_16.O_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
314 PID_16.P_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
315 PID_16.O_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
316 PID_17.PID_LOOP_TYPE Class_3 SelectOperate Variation 2 Variation 2
317 PID_17.P_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
318 PID_17.P_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
319 PID_17.P_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
320 PID_17.O_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
321 PID_17.O_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
322 PID_17.O_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
323 PID_17.P_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
324 PID_17.O_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
325 PID_18.PID_LOOP_TYPE Class_3 SelectOperate Variation 2 Variation 2
326 PID_18.P_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
327 PID_18.P_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
328 PID_18.P_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
329 PID_18.O_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
330 PID_18.O_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
331 PID_18.O_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
332 PID_18.P_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
333 PID_18.O_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
334 PID_19.PID_LOOP_TYPE Class_3 SelectOperate Variation 2 Variation 2
335 PID_19.P_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
336 PID_19.P_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
DNP3 Data Point List 99
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
337 PID_19.P_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
338 PID_19.O_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
339 PID_19.O_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
340 PID_19.O_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
341 PID_19.P_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
342 PID_19.O_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
343 PID_20.PID_LOOP_TYPE Class_3 SelectOperate Variation 2 Variation 2
344 PID_20.P_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
345 PID_20.P_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
346 PID_20.P_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
347 PID_20.O_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
348 PID_20.O_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
349 PID_20.O_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
350 PID_20.P_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
351 PID_20.O_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
352 PID_21.PID_LOOP_TYPE Class_3 SelectOperate Variation 2 Variation 2
353 PID_21.P_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
354 PID_21.P_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
355 PID_21.P_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
356 PID_21.O_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
357 PID_21.O_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
358 PID_21.O_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
359 PID_21.P_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
360 PID_21.O_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
361 PID_22.PID_LOOP_TYPE Class_3 SelectOperate Variation 2 Variation 2
362 PID_22.P_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
363 PID_22.P_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
364 PID_22.P_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
365 PID_22.O_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
366 PID_22.O_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
367 PID_22.O_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
368 PID_22.P_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
100 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
369 PID_22.O_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
370 PID_23.PID_LOOP_TYPE Class_3 SelectOperate Variation 2 Variation 2
371 PID_23.P_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
372 PID_23.P_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
373 PID_23.P_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
374 PID_23.O_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
375 PID_23.O_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
376 PID_23.O_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
377 PID_23.P_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
378 PID_23.O_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
379 PID_24.PID_LOOP_TYPE Class_3 SelectOperate Variation 2 Variation 2
380 PID_24.P_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
381 PID_24.P_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
382 PID_24.P_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
383 PID_24.O_PROPORTIONAL_G Class_3 SelectOperate Variation 3 Variation 3
384 PID_24.O_INTEGRAL_GAIN Class_3 SelectOperate Variation 3 Variation 3
385 PID_24.O_DERIVATIVE_GAIN Class_3 SelectOperate Variation 3 Variation 3
386 PID_24.P_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
387 PID_24.O_SETPOINT Class_3 SelectOperate Variation 3 Variation 3
388 Components_1.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
389 Components_1.C1_OVRD Class_3 SelectOperate Variation 4 Variation 4
390 Components_1.N2_OVRD Class_3 SelectOperate Variation 4 Variation 4
391 Components_1.CO2_OVRD Class_3 SelectOperate Variation 4 Variation 4
392 Components_1.C2_OVRD Class_3 SelectOperate Variation 4 Variation 4
393 Components_1.C3_OVRD Class_3 SelectOperate Variation 4 Variation 4
394 Components_1.H2O_OVRD Class_3 SelectOperate Variation 4 Variation 4
395 Components_1.H2S_OVRD Class_3 SelectOperate Variation 4 Variation 4
396 Components_1.H2_OVRD Class_3 SelectOperate Variation 4 Variation 4
397 Components_1.CO_OVRD Class_3 SelectOperate Variation 4 Variation 4
398 Components_1.O2_OVRD Class_3 SelectOperate Variation 4 Variation 4
399 Components_1.IC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
400 Components_1.NC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
DNP3 Data Point List 101
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
401 Components_1.IC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
402 Components_1.NC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
403 Components_1.C6_OVRD Class_3 SelectOperate Variation 4 Variation 4
404 Components_1.C7_OVRD Class_3 SelectOperate Variation 4 Variation 4
405 Components_1.C8_OVRD Class_3 SelectOperate Variation 4 Variation 4
406 Components_1.C9_OVRD Class_3 SelectOperate Variation 4 Variation 4
407 Components_1.C10_OVRD Class_3 SelectOperate Variation 4 Variation 4
408 Components_1.HE_OVRD Class_3 SelectOperate Variation 4 Variation 4
409 Components_1.AR_OVRD Class_3 SelectOperate Variation 4 Variation 4
410 Components_1.NEOC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
411 Components_1.BENZENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
412 Components_1.TOLUENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
413 Components_2.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
414 Components_2.C1_OVRD Class_3 SelectOperate Variation 4 Variation 4
415 Components_2.N2_OVRD Class_3 SelectOperate Variation 4 Variation 4
416 Components_2.CO2_OVRD Class_3 SelectOperate Variation 4 Variation 4
417 Components_2.C2_OVRD Class_3 SelectOperate Variation 4 Variation 4
418 Components_2.C3_OVRD Class_3 SelectOperate Variation 4 Variation 4
419 Components_2.H2O_OVRD Class_3 SelectOperate Variation 4 Variation 4
420 Components_2.H2S_OVRD Class_3 SelectOperate Variation 4 Variation 4
421 Components_2.H2_OVRD Class_3 SelectOperate Variation 4 Variation 4
422 Components_2.CO_OVRD Class_3 SelectOperate Variation 4 Variation 4
423 Components_2.O2_OVRD Class_3 SelectOperate Variation 4 Variation 4
424 Components_2.IC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
425 Components_2.NC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
426 Components_2.IC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
427 Components_2.NC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
428 Components_2.C6_OVRD Class_3 SelectOperate Variation 4 Variation 4
429 Components_2.C7_OVRD Class_3 SelectOperate Variation 4 Variation 4
430 Components_2.C8_OVRD Class_3 SelectOperate Variation 4 Variation 4
431 Components_2.C9_OVRD Class_3 SelectOperate Variation 4 Variation 4
432 Components_2.C10_OVRD Class_3 SelectOperate Variation 4 Variation 4
102 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
433 Components_2.HE_OVRD Class_3 SelectOperate Variation 4 Variation 4
434 Components_2.AR_OVRD Class_3 SelectOperate Variation 4 Variation 4
435 Components_2.NEOC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
436 Components_2.BENZENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
437 Components_2.TOLUENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
438 Components_3.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
439 Components_3.C1_OVRD Class_3 SelectOperate Variation 4 Variation 4
440 Components_3.N2_OVRD Class_3 SelectOperate Variation 4 Variation 4
441 Components_3.CO2_OVRD Class_3 SelectOperate Variation 4 Variation 4
442 Components_3.C2_OVRD Class_3 SelectOperate Variation 4 Variation 4
443 Components_3.C3_OVRD Class_3 SelectOperate Variation 4 Variation 4
444 Components_3.H2O_OVRD Class_3 SelectOperate Variation 4 Variation 4
445 Components_3.H2S_OVRD Class_3 SelectOperate Variation 4 Variation 4
446 Components_3.H2_OVRD Class_3 SelectOperate Variation 4 Variation 4
447 Components_3.CO_OVRD Class_3 SelectOperate Variation 4 Variation 4
448 Components_3.O2_OVRD Class_3 SelectOperate Variation 4 Variation 4
449 Components_3.IC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
450 Components_3.NC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
451 Components_3.IC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
452 Components_3.NC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
453 Components_3.C6_OVRD Class_3 SelectOperate Variation 4 Variation 4
454 Components_3.C7_OVRD Class_3 SelectOperate Variation 4 Variation 4
455 Components_3.C8_OVRD Class_3 SelectOperate Variation 4 Variation 4
456 Components_3.C9_OVRD Class_3 SelectOperate Variation 4 Variation 4
457 Components_3.C10_OVRD Class_3 SelectOperate Variation 4 Variation 4
458 Components_3.HE_OVRD Class_3 SelectOperate Variation 4 Variation 4
459 Components_3.AR_OVRD Class_3 SelectOperate Variation 4 Variation 4
460 Components_3.NEOC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
461 Components_3.BENZENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
462 Components_3.TOLUENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
463 Components_4.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
464 Components_4.C1_OVRD Class_3 SelectOperate Variation 4 Variation 4
DNP3 Data Point List 103
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
465 Components_4.N2_OVRD Class_3 SelectOperate Variation 4 Variation 4
466 Components_4.CO2_OVRD Class_3 SelectOperate Variation 4 Variation 4
467 Components_4.C2_OVRD Class_3 SelectOperate Variation 4 Variation 4
468 Components_4.C3_OVRD Class_3 SelectOperate Variation 4 Variation 4
469 Components_4.H2O_OVRD Class_3 SelectOperate Variation 4 Variation 4
470 Components_4.H2S_OVRD Class_3 SelectOperate Variation 4 Variation 4
471 Components_4.H2_OVRD Class_3 SelectOperate Variation 4 Variation 4
472 Components_4.CO_OVRD Class_3 SelectOperate Variation 4 Variation 4
473 Components_4.O2_OVRD Class_3 SelectOperate Variation 4 Variation 4
474 Components_4.IC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
475 Components_4.NC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
476 Components_4.IC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
477 Components_4.NC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
478 Components_4.C6_OVRD Class_3 SelectOperate Variation 4 Variation 4
479 Components_4.C7_OVRD Class_3 SelectOperate Variation 4 Variation 4
480 Components_4.C8_OVRD Class_3 SelectOperate Variation 4 Variation 4
481 Components_4.C9_OVRD Class_3 SelectOperate Variation 4 Variation 4
482 Components_4.C10_OVRD Class_3 SelectOperate Variation 4 Variation 4
483 Components_4.HE_OVRD Class_3 SelectOperate Variation 4 Variation 4
484 Components_4.AR_OVRD Class_3 SelectOperate Variation 4 Variation 4
485 Components_4.NEOC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
486 Components_4.BENZENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
487 Components_4.TOLUENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
488 Components_5.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
489 Components_5.C1_OVRD Class_3 SelectOperate Variation 4 Variation 4
490 Components_5.N2_OVRD Class_3 SelectOperate Variation 4 Variation 4
491 Components_5.CO2_OVRD Class_3 SelectOperate Variation 4 Variation 4
492 Components_5.C2_OVRD Class_3 SelectOperate Variation 4 Variation 4
493 Components_5.C3_OVRD Class_3 SelectOperate Variation 4 Variation 4
494 Components_5.H2O_OVRD Class_3 SelectOperate Variation 4 Variation 4
495 Components_5.H2S_OVRD Class_3 SelectOperate Variation 4 Variation 4
496 Components_5.H2_OVRD Class_3 SelectOperate Variation 4 Variation 4
104 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
497 Components_5.CO_OVRD Class_3 SelectOperate Variation 4 Variation 4
498 Components_5.O2_OVRD Class_3 SelectOperate Variation 4 Variation 4
499 Components_5.IC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
500 Components_5.NC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
501 Components_5.IC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
502 Components_5.NC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
503 Components_5.C6_OVRD Class_3 SelectOperate Variation 4 Variation 4
504 Components_5.C7_OVRD Class_3 SelectOperate Variation 4 Variation 4
505 Components_5.C8_OVRD Class_3 SelectOperate Variation 4 Variation 4
506 Components_5.C9_OVRD Class_3 SelectOperate Variation 4 Variation 4
507 Components_5.C10_OVRD Class_3 SelectOperate Variation 4 Variation 4
508 Components_5.HE_OVRD Class_3 SelectOperate Variation 4 Variation 4
509 Components_5.AR_OVRD Class_3 SelectOperate Variation 4 Variation 4
510 Components_5.NEOC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
511 Components_5.BENZENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
512 Components_5.TOLUENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
513 Components_6.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
514 Components_6.C1_OVRD Class_3 SelectOperate Variation 4 Variation 4
515 Components_6.N2_OVRD Class_3 SelectOperate Variation 4 Variation 4
516 Components_6.CO2_OVRD Class_3 SelectOperate Variation 4 Variation 4
517 Components_6.C2_OVRD Class_3 SelectOperate Variation 4 Variation 4
518 Components_6.C3_OVRD Class_3 SelectOperate Variation 4 Variation 4
519 Components_6.H2O_OVRD Class_3 SelectOperate Variation 4 Variation 4
520 Components_6.H2S_OVRD Class_3 SelectOperate Variation 4 Variation 4
521 Components_6.H2_OVRD Class_3 SelectOperate Variation 4 Variation 4
522 Components_6.CO_OVRD Class_3 SelectOperate Variation 4 Variation 4
523 Components_6.O2_OVRD Class_3 SelectOperate Variation 4 Variation 4
524 Components_6.IC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
525 Components_6.NC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
526 Components_6.IC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
527 Components_6.NC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
528 Components_6.C6_OVRD Class_3 SelectOperate Variation 4 Variation 4
DNP3 Data Point List 105
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
529 Components_6.C7_OVRD Class_3 SelectOperate Variation 4 Variation 4
530 Components_6.C8_OVRD Class_3 SelectOperate Variation 4 Variation 4
531 Components_6.C9_OVRD Class_3 SelectOperate Variation 4 Variation 4
532 Components_6.C10_OVRD Class_3 SelectOperate Variation 4 Variation 4
533 Components_6.HE_OVRD Class_3 SelectOperate Variation 4 Variation 4
534 Components_6.AR_OVRD Class_3 SelectOperate Variation 4 Variation 4
535 Components_6.NEOC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
536 Components_6.BENZENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
537 Components_6.TOLUENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
538 Components_7.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
539 Components_7.C1_OVRD Class_3 SelectOperate Variation 4 Variation 4
540 Components_7.N2_OVRD Class_3 SelectOperate Variation 4 Variation 4
541 Components_7.CO2_OVRD Class_3 SelectOperate Variation 4 Variation 4
542 Components_7.C2_OVRD Class_3 SelectOperate Variation 4 Variation 4
543 Components_7.C3_OVRD Class_3 SelectOperate Variation 4 Variation 4
544 Components_7.H2O_OVRD Class_3 SelectOperate Variation 4 Variation 4
545 Components_7.H2S_OVRD Class_3 SelectOperate Variation 4 Variation 4
546 Components_7.H2_OVRD Class_3 SelectOperate Variation 4 Variation 4
547 Components_7.CO_OVRD Class_3 SelectOperate Variation 4 Variation 4
548 Components_7.O2_OVRD Class_3 SelectOperate Variation 4 Variation 4
549 Components_7.IC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
550 Components_7.NC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
551 Components_7.IC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
552 Components_7.NC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
553 Components_7.C6_OVRD Class_3 SelectOperate Variation 4 Variation 4
554 Components_7.C7_OVRD Class_3 SelectOperate Variation 4 Variation 4
555 Components_7.C8_OVRD Class_3 SelectOperate Variation 4 Variation 4
556 Components_7.C9_OVRD Class_3 SelectOperate Variation 4 Variation 4
557 Components_7.C10_OVRD Class_3 SelectOperate Variation 4 Variation 4
558 Components_7.HE_OVRD Class_3 SelectOperate Variation 4 Variation 4
559 Components_7.AR_OVRD Class_3 SelectOperate Variation 4 Variation 4
560 Components_7.NEOC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
106 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
561 Components_7.BENZENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
562 Components_7.TOLUENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
563 Components_8.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
564 Components_8.C1_OVRD Class_3 SelectOperate Variation 4 Variation 4
565 Components_8.N2_OVRD Class_3 SelectOperate Variation 4 Variation 4
566 Components_8.CO2_OVRD Class_3 SelectOperate Variation 4 Variation 4
567 Components_8.C2_OVRD Class_3 SelectOperate Variation 4 Variation 4
568 Components_8.C3_OVRD Class_3 SelectOperate Variation 4 Variation 4
569 Components_8.H2O_OVRD Class_3 SelectOperate Variation 4 Variation 4
570 Components_8.H2S_OVRD Class_3 SelectOperate Variation 4 Variation 4
571 Components_8.H2_OVRD Class_3 SelectOperate Variation 4 Variation 4
572 Components_8.CO_OVRD Class_3 SelectOperate Variation 4 Variation 4
573 Components_8.O2_OVRD Class_3 SelectOperate Variation 4 Variation 4
574 Components_8.IC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
575 Components_8.NC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
576 Components_8.IC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
577 Components_8.NC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
578 Components_8.C6_OVRD Class_3 SelectOperate Variation 4 Variation 4
579 Components_8.C7_OVRD Class_3 SelectOperate Variation 4 Variation 4
580 Components_8.C8_OVRD Class_3 SelectOperate Variation 4 Variation 4
581 Components_8.C9_OVRD Class_3 SelectOperate Variation 4 Variation 4
582 Components_8.C10_OVRD Class_3 SelectOperate Variation 4 Variation 4
583 Components_8.HE_OVRD Class_3 SelectOperate Variation 4 Variation 4
584 Components_8.AR_OVRD Class_3 SelectOperate Variation 4 Variation 4
585 Components_8.NEOC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
586 Components_8.BENZENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
587 Components_8.TOLUENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
588 Components_9.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
589 Components_9.C1_OVRD Class_3 SelectOperate Variation 4 Variation 4
590 Components_9.N2_OVRD Class_3 SelectOperate Variation 4 Variation 4
591 Components_9.CO2_OVRD Class_3 SelectOperate Variation 4 Variation 4
592 Components_9.C2_OVRD Class_3 SelectOperate Variation 4 Variation 4
DNP3 Data Point List 107
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
593 Components_9.C3_OVRD Class_3 SelectOperate Variation 4 Variation 4
594 Components_9.H2O_OVRD Class_3 SelectOperate Variation 4 Variation 4
595 Components_9.H2S_OVRD Class_3 SelectOperate Variation 4 Variation 4
596 Components_9.H2_OVRD Class_3 SelectOperate Variation 4 Variation 4
597 Components_9.CO_OVRD Class_3 SelectOperate Variation 4 Variation 4
598 Components_9.O2_OVRD Class_3 SelectOperate Variation 4 Variation 4
599 Components_9.IC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
600 Components_9.NC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
601 Components_9.IC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
602 Components_9.NC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
603 Components_9.C6_OVRD Class_3 SelectOperate Variation 4 Variation 4
604 Components_9.C7_OVRD Class_3 SelectOperate Variation 4 Variation 4
605 Components_9.C8_OVRD Class_3 SelectOperate Variation 4 Variation 4
606 Components_9.C9_OVRD Class_3 SelectOperate Variation 4 Variation 4
607 Components_9.C10_OVRD Class_3 SelectOperate Variation 4 Variation 4
608 Components_9.HE_OVRD Class_3 SelectOperate Variation 4 Variation 4
609 Components_9.AR_OVRD Class_3 SelectOperate Variation 4 Variation 4
610 Components_9.NEOC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
611 Components_9.BENZENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
612 Components_9.TOLUENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
613 Components_10.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
614 Components_10.C1_OVRD Class_3 SelectOperate Variation 4 Variation 4
615 Components_10.N2_OVRD Class_3 SelectOperate Variation 4 Variation 4
616 Components_10.CO2_OVRD Class_3 SelectOperate Variation 4 Variation 4
617 Components_10.C2_OVRD Class_3 SelectOperate Variation 4 Variation 4
618 Components_10.C3_OVRD Class_3 SelectOperate Variation 4 Variation 4
619 Components_10.H2O_OVRD Class_3 SelectOperate Variation 4 Variation 4
620 Components_10.H2S_OVRD Class_3 SelectOperate Variation 4 Variation 4
621 Components_10.H2_OVRD Class_3 SelectOperate Variation 4 Variation 4
622 Components_10.CO_OVRD Class_3 SelectOperate Variation 4 Variation 4
623 Components_10.O2_OVRD Class_3 SelectOperate Variation 4 Variation 4
624 Components_10.IC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
108 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
625 Components_10.NC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
626 Components_10.IC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
627 Components_10.NC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
628 Components_10.C6_OVRD Class_3 SelectOperate Variation 4 Variation 4
629 Components_10.C7_OVRD Class_3 SelectOperate Variation 4 Variation 4
630 Components_10.C8_OVRD Class_3 SelectOperate Variation 4 Variation 4
631 Components_10.C9_OVRD Class_3 SelectOperate Variation 4 Variation 4
632 Components_10.C10_OVRD Class_3 SelectOperate Variation 4 Variation 4
633 Components_10.HE_OVRD Class_3 SelectOperate Variation 4 Variation 4
634 Components_10.AR_OVRD Class_3 SelectOperate Variation 4 Variation 4
635 Components_10.NEOC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
636 Components_10.BENZENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
637 Components_10.TOLUENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
638 Components_11.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
639 Components_11.C1_OVRD Class_3 SelectOperate Variation 4 Variation 4
640 Components_11.N2_OVRD Class_3 SelectOperate Variation 4 Variation 4
641 Components_11.CO2_OVRD Class_3 SelectOperate Variation 4 Variation 4
642 Components_11.C2_OVRD Class_3 SelectOperate Variation 4 Variation 4
643 Components_11.C3_OVRD Class_3 SelectOperate Variation 4 Variation 4
644 Components_11.H2O_OVRD Class_3 SelectOperate Variation 4 Variation 4
645 Components_11.H2S_OVRD Class_3 SelectOperate Variation 4 Variation 4
646 Components_11.H2_OVRD Class_3 SelectOperate Variation 4 Variation 4
647 Components_11.CO_OVRD Class_3 SelectOperate Variation 4 Variation 4
648 Components_11.O2_OVRD Class_3 SelectOperate Variation 4 Variation 4
649 Components_11.IC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
650 Components_11.NC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
651 Components_11.IC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
652 Components_11.NC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
653 Components_11.C6_OVRD Class_3 SelectOperate Variation 4 Variation 4
654 Components_11.C7_OVRD Class_3 SelectOperate Variation 4 Variation 4
655 Components_11.C8_OVRD Class_3 SelectOperate Variation 4 Variation 4
656 Components_11.C9_OVRD Class_3 SelectOperate Variation 4 Variation 4
DNP3 Data Point List 109
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
657 Components_11.C10_OVRD Class_3 SelectOperate Variation 4 Variation 4
658 Components_11.HE_OVRD Class_3 SelectOperate Variation 4 Variation 4
659 Components_11.AR_OVRD Class_3 SelectOperate Variation 4 Variation 4
660 Components_11.NEOC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
661 Components_11.BENZENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
662 Components_11.TOLUENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
663 Components_12.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
664 Components_12.C1_OVRD Class_3 SelectOperate Variation 4 Variation 4
665 Components_12.N2_OVRD Class_3 SelectOperate Variation 4 Variation 4
666 Components_12.CO2_OVRD Class_3 SelectOperate Variation 4 Variation 4
667 Components_12.C2_OVRD Class_3 SelectOperate Variation 4 Variation 4
668 Components_12.C3_OVRD Class_3 SelectOperate Variation 4 Variation 4
669 Components_12.H2O_OVRD Class_3 SelectOperate Variation 4 Variation 4
670 Components_12.H2S_OVRD Class_3 SelectOperate Variation 4 Variation 4
671 Components_12.H2_OVRD Class_3 SelectOperate Variation 4 Variation 4
672 Components_12.CO_OVRD Class_3 SelectOperate Variation 4 Variation 4
673 Components_12.O2_OVRD Class_3 SelectOperate Variation 4 Variation 4
674 Components_12.IC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
675 Components_12.NC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
676 Components_12.IC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
677 Components_12.NC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
678 Components_12.C6_OVRD Class_3 SelectOperate Variation 4 Variation 4
679 Components_12.C7_OVRD Class_3 SelectOperate Variation 4 Variation 4
680 Components_12.C8_OVRD Class_3 SelectOperate Variation 4 Variation 4
681 Components_12.C9_OVRD Class_3 SelectOperate Variation 4 Variation 4
682 Components_12.C10_OVRD Class_3 SelectOperate Variation 4 Variation 4
683 Components_12.HE_OVRD Class_3 SelectOperate Variation 4 Variation 4
684 Components_12.AR_OVRD Class_3 SelectOperate Variation 4 Variation 4
685 Components_12.NEOC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
686 Components_12.BENZENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
687 Components_12.TOLUENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
688 Components_13.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
110 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
689 Components_13.C1_OVRD Class_3 SelectOperate Variation 4 Variation 4
690 Components_13.N2_OVRD Class_3 SelectOperate Variation 4 Variation 4
691 Components_13.CO2_OVRD Class_3 SelectOperate Variation 4 Variation 4
692 Components_13.C2_OVRD Class_3 SelectOperate Variation 4 Variation 4
693 Components_13.C3_OVRD Class_3 SelectOperate Variation 4 Variation 4
694 Components_13.H2O_OVRD Class_3 SelectOperate Variation 4 Variation 4
695 Components_13.H2S_OVRD Class_3 SelectOperate Variation 4 Variation 4
696 Components_13.H2_OVRD Class_3 SelectOperate Variation 4 Variation 4
697 Components_13.CO_OVRD Class_3 SelectOperate Variation 4 Variation 4
698 Components_13.O2_OVRD Class_3 SelectOperate Variation 4 Variation 4
699 Components_13.IC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
700 Components_13.NC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
701 Components_13.IC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
702 Components_13.NC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
703 Components_13.C6_OVRD Class_3 SelectOperate Variation 4 Variation 4
704 Components_13.C7_OVRD Class_3 SelectOperate Variation 4 Variation 4
705 Components_13.C8_OVRD Class_3 SelectOperate Variation 4 Variation 4
706 Components_13.C9_OVRD Class_3 SelectOperate Variation 4 Variation 4
707 Components_13.C10_OVRD Class_3 SelectOperate Variation 4 Variation 4
708 Components_13.HE_OVRD Class_3 SelectOperate Variation 4 Variation 4
709 Components_13.AR_OVRD Class_3 SelectOperate Variation 4 Variation 4
710 Components_13.NEOC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
711 Components_13.BENZENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
712 Components_13.TOLUENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
713 Components_14.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
714 Components_14.C1_OVRD Class_3 SelectOperate Variation 4 Variation 4
715 Components_14.N2_OVRD Class_3 SelectOperate Variation 4 Variation 4
716 Components_14.CO2_OVRD Class_3 SelectOperate Variation 4 Variation 4
717 Components_14.C2_OVRD Class_3 SelectOperate Variation 4 Variation 4
718 Components_14.C3_OVRD Class_3 SelectOperate Variation 4 Variation 4
719 Components_14.H2O_OVRD Class_3 SelectOperate Variation 4 Variation 4
720 Components_14.H2S_OVRD Class_3 SelectOperate Variation 4 Variation 4
DNP3 Data Point List 111
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
721 Components_14.H2_OVRD Class_3 SelectOperate Variation 4 Variation 4
722 Components_14.CO_OVRD Class_3 SelectOperate Variation 4 Variation 4
723 Components_14.O2_OVRD Class_3 SelectOperate Variation 4 Variation 4
724 Components_14.IC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
725 Components_14.NC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
726 Components_14.IC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
727 Components_14.NC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
728 Components_14.C6_OVRD Class_3 SelectOperate Variation 4 Variation 4
729 Components_14.C7_OVRD Class_3 SelectOperate Variation 4 Variation 4
730 Components_14.C8_OVRD Class_3 SelectOperate Variation 4 Variation 4
731 Components_14.C9_OVRD Class_3 SelectOperate Variation 4 Variation 4
732 Components_14.C10_OVRD Class_3 SelectOperate Variation 4 Variation 4
733 Components_14.HE_OVRD Class_3 SelectOperate Variation 4 Variation 4
734 Components_14.AR_OVRD Class_3 SelectOperate Variation 4 Variation 4
735 Components_14.NEOC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
736 Components_14.BENZENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
737 Components_14.TOLUENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
738 Components_15.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
739 Components_15.C1_OVRD Class_3 SelectOperate Variation 4 Variation 4
740 Components_15.N2_OVRD Class_3 SelectOperate Variation 4 Variation 4
741 Components_15.CO2_OVRD Class_3 SelectOperate Variation 4 Variation 4
742 Components_15.C2_OVRD Class_3 SelectOperate Variation 4 Variation 4
743 Components_15.C3_OVRD Class_3 SelectOperate Variation 4 Variation 4
744 Components_15.H2O_OVRD Class_3 SelectOperate Variation 4 Variation 4
745 Components_15.H2S_OVRD Class_3 SelectOperate Variation 4 Variation 4
746 Components_15.H2_OVRD Class_3 SelectOperate Variation 4 Variation 4
747 Components_15.CO_OVRD Class_3 SelectOperate Variation 4 Variation 4
748 Components_15.O2_OVRD Class_3 SelectOperate Variation 4 Variation 4
749 Components_15.IC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
750 Components_15.NC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
751 Components_15.IC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
752 Components_15.NC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
112 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
753 Components_15.C6_OVRD Class_3 SelectOperate Variation 4 Variation 4
754 Components_15.C7_OVRD Class_3 SelectOperate Variation 4 Variation 4
755 Components_15.C8_OVRD Class_3 SelectOperate Variation 4 Variation 4
756 Components_15.C9_OVRD Class_3 SelectOperate Variation 4 Variation 4
757 Components_15.C10_OVRD Class_3 SelectOperate Variation 4 Variation 4
758 Components_15.HE_OVRD Class_3 SelectOperate Variation 4 Variation 4
759 Components_15.AR_OVRD Class_3 SelectOperate Variation 4 Variation 4
760 Components_15.NEOC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
761 Components_15.BENZENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
762 Components_15.TOLUENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
763 Components_16.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
764 Components_16.C1_OVRD Class_3 SelectOperate Variation 4 Variation 4
765 Components_16.N2_OVRD Class_3 SelectOperate Variation 4 Variation 4
766 Components_16.CO2_OVRD Class_3 SelectOperate Variation 4 Variation 4
767 Components_16.C2_OVRD Class_3 SelectOperate Variation 4 Variation 4
768 Components_16.C3_OVRD Class_3 SelectOperate Variation 4 Variation 4
769 Components_16.H2O_OVRD Class_3 SelectOperate Variation 4 Variation 4
770 Components_16.H2S_OVRD Class_3 SelectOperate Variation 4 Variation 4
771 Components_16.H2_OVRD Class_3 SelectOperate Variation 4 Variation 4
772 Components_16.CO_OVRD Class_3 SelectOperate Variation 4 Variation 4
773 Components_16.O2_OVRD Class_3 SelectOperate Variation 4 Variation 4
774 Components_16.IC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
775 Components_16.NC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
776 Components_16.IC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
777 Components_16.NC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
778 Components_16.C6_OVRD Class_3 SelectOperate Variation 4 Variation 4
779 Components_16.C7_OVRD Class_3 SelectOperate Variation 4 Variation 4
780 Components_16.C8_OVRD Class_3 SelectOperate Variation 4 Variation 4
781 Components_16.C9_OVRD Class_3 SelectOperate Variation 4 Variation 4
782 Components_16.C10_OVRD Class_3 SelectOperate Variation 4 Variation 4
783 Components_16.HE_OVRD Class_3 SelectOperate Variation 4 Variation 4
784 Components_16.AR_OVRD Class_3 SelectOperate Variation 4 Variation 4
DNP3 Data Point List 113
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
785 Components_16.NEOC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
786 Components_16.BENZENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
787 Components_16.TOLUENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
788 Components_17.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
789 Components_17.C1_OVRD Class_3 SelectOperate Variation 4 Variation 4
790 Components_17.N2_OVRD Class_3 SelectOperate Variation 4 Variation 4
791 Components_17.CO2_OVRD Class_3 SelectOperate Variation 4 Variation 4
792 Components_17.C2_OVRD Class_3 SelectOperate Variation 4 Variation 4
793 Components_17.C3_OVRD Class_3 SelectOperate Variation 4 Variation 4
794 Components_17.H2O_OVRD Class_3 SelectOperate Variation 4 Variation 4
795 Components_17.H2S_OVRD Class_3 SelectOperate Variation 4 Variation 4
796 Components_17.H2_OVRD Class_3 SelectOperate Variation 4 Variation 4
797 Components_17.CO_OVRD Class_3 SelectOperate Variation 4 Variation 4
798 Components_17.O2_OVRD Class_3 SelectOperate Variation 4 Variation 4
799 Components_17.IC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
800 Components_17.NC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
801 Components_17.IC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
802 Components_17.NC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
803 Components_17.C6_OVRD Class_3 SelectOperate Variation 4 Variation 4
804 Components_17.C7_OVRD Class_3 SelectOperate Variation 4 Variation 4
805 Components_17.C8_OVRD Class_3 SelectOperate Variation 4 Variation 4
806 Components_17.C9_OVRD Class_3 SelectOperate Variation 4 Variation 4
807 Components_17.C10_OVRD Class_3 SelectOperate Variation 4 Variation 4
808 Components_17.HE_OVRD Class_3 SelectOperate Variation 4 Variation 4
809 Components_17.AR_OVRD Class_3 SelectOperate Variation 4 Variation 4
810 Components_17.NEOC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
811 Components_17.BENZENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
812 Components_17.TOLUENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
813 Components_18.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
814 Components_18.C1_OVRD Class_3 SelectOperate Variation 4 Variation 4
815 Components_18.N2_OVRD Class_3 SelectOperate Variation 4 Variation 4
816 Components_18.CO2_OVRD Class_3 SelectOperate Variation 4 Variation 4
114 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
817 Components_18.C2_OVRD Class_3 SelectOperate Variation 4 Variation 4
818 Components_18.C3_OVRD Class_3 SelectOperate Variation 4 Variation 4
819 Components_18.H2O_OVRD Class_3 SelectOperate Variation 4 Variation 4
820 Components_18.H2S_OVRD Class_3 SelectOperate Variation 4 Variation 4
821 Components_18.H2_OVRD Class_3 SelectOperate Variation 4 Variation 4
822 Components_18.CO_OVRD Class_3 SelectOperate Variation 4 Variation 4
823 Components_18.O2_OVRD Class_3 SelectOperate Variation 4 Variation 4
824 Components_18.IC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
825 Components_18.NC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
826 Components_18.IC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
827 Components_18.NC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
828 Components_18.C6_OVRD Class_3 SelectOperate Variation 4 Variation 4
829 Components_18.C7_OVRD Class_3 SelectOperate Variation 4 Variation 4
830 Components_18.C8_OVRD Class_3 SelectOperate Variation 4 Variation 4
831 Components_18.C9_OVRD Class_3 SelectOperate Variation 4 Variation 4
832 Components_18.C10_OVRD Class_3 SelectOperate Variation 4 Variation 4
833 Components_18.HE_OVRD Class_3 SelectOperate Variation 4 Variation 4
834 Components_18.AR_OVRD Class_3 SelectOperate Variation 4 Variation 4
835 Components_18.NEOC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
836 Components_18.BENZENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
837 Components_18.TOLUENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
838 Components_19.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
839 Components_19.C1_OVRD Class_3 SelectOperate Variation 4 Variation 4
840 Components_19.N2_OVRD Class_3 SelectOperate Variation 4 Variation 4
841 Components_19.CO2_OVRD Class_3 SelectOperate Variation 4 Variation 4
842 Components_19.C2_OVRD Class_3 SelectOperate Variation 4 Variation 4
843 Components_19.C3_OVRD Class_3 SelectOperate Variation 4 Variation 4
844 Components_19.H2O_OVRD Class_3 SelectOperate Variation 4 Variation 4
845 Components_19.H2S_OVRD Class_3 SelectOperate Variation 4 Variation 4
846 Components_19.H2_OVRD Class_3 SelectOperate Variation 4 Variation 4
847 Components_19.CO_OVRD Class_3 SelectOperate Variation 4 Variation 4
848 Components_19.O2_OVRD Class_3 SelectOperate Variation 4 Variation 4
DNP3 Data Point List 115
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
849 Components_19.IC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
850 Components_19.NC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
851 Components_19.IC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
852 Components_19.NC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
853 Components_19.C6_OVRD Class_3 SelectOperate Variation 4 Variation 4
854 Components_19.C7_OVRD Class_3 SelectOperate Variation 4 Variation 4
855 Components_19.C8_OVRD Class_3 SelectOperate Variation 4 Variation 4
856 Components_19.C9_OVRD Class_3 SelectOperate Variation 4 Variation 4
857 Components_19.C10_OVRD Class_3 SelectOperate Variation 4 Variation 4
858 Components_19.HE_OVRD Class_3 SelectOperate Variation 4 Variation 4
859 Components_19.AR_OVRD Class_3 SelectOperate Variation 4 Variation 4
860 Components_19.NEOC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
861 Components_19.BENZENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
862 Components_19.TOLUENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
863 Components_20.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
864 Components_20.C1_OVRD Class_3 SelectOperate Variation 4 Variation 4
865 Components_20.N2_OVRD Class_3 SelectOperate Variation 4 Variation 4
866 Components_20.CO2_OVRD Class_3 SelectOperate Variation 4 Variation 4
867 Components_20.C2_OVRD Class_3 SelectOperate Variation 4 Variation 4
868 Components_20.C3_OVRD Class_3 SelectOperate Variation 4 Variation 4
869 Components_20.H2O_OVRD Class_3 SelectOperate Variation 4 Variation 4
870 Components_20.H2S_OVRD Class_3 SelectOperate Variation 4 Variation 4
871 Components_20.H2_OVRD Class_3 SelectOperate Variation 4 Variation 4
872 Components_20.CO_OVRD Class_3 SelectOperate Variation 4 Variation 4
873 Components_20.O2_OVRD Class_3 SelectOperate Variation 4 Variation 4
874 Components_20.IC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
875 Components_20.NC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
876 Components_20.IC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
877 Components_20.NC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
878 Components_20.C6_OVRD Class_3 SelectOperate Variation 4 Variation 4
879 Components_20.C7_OVRD Class_3 SelectOperate Variation 4 Variation 4
880 Components_20.C8_OVRD Class_3 SelectOperate Variation 4 Variation 4
116 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
881 Components_20.C9_OVRD Class_3 SelectOperate Variation 4 Variation 4
882 Components_20.C10_OVRD Class_3 SelectOperate Variation 4 Variation 4
883 Components_20.HE_OVRD Class_3 SelectOperate Variation 4 Variation 4
884 Components_20.AR_OVRD Class_3 SelectOperate Variation 4 Variation 4
885 Components_20.NEOC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
886 Components_20.BENZENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
887 Components_20.TOLUENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
888 Components_21.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
889 Components_21.C1_OVRD Class_3 SelectOperate Variation 4 Variation 4
890 Components_21.N2_OVRD Class_3 SelectOperate Variation 4 Variation 4
891 Components_21.CO2_OVRD Class_3 SelectOperate Variation 4 Variation 4
892 Components_21.C2_OVRD Class_3 SelectOperate Variation 4 Variation 4
893 Components_21.C3_OVRD Class_3 SelectOperate Variation 4 Variation 4
894 Components_21.H2O_OVRD Class_3 SelectOperate Variation 4 Variation 4
895 Components_21.H2S_OVRD Class_3 SelectOperate Variation 4 Variation 4
896 Components_21.H2_OVRD Class_3 SelectOperate Variation 4 Variation 4
897 Components_21.CO_OVRD Class_3 SelectOperate Variation 4 Variation 4
898 Components_21.O2_OVRD Class_3 SelectOperate Variation 4 Variation 4
899 Components_21.IC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
900 Components_21.NC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
901 Components_21.IC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
902 Components_21.NC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
903 Components_21.C6_OVRD Class_3 SelectOperate Variation 4 Variation 4
904 Components_21.C7_OVRD Class_3 SelectOperate Variation 4 Variation 4
905 Components_21.C8_OVRD Class_3 SelectOperate Variation 4 Variation 4
906 Components_21.C9_OVRD Class_3 SelectOperate Variation 4 Variation 4
907 Components_21.C10_OVRD Class_3 SelectOperate Variation 4 Variation 4
908 Components_21.HE_OVRD Class_3 SelectOperate Variation 4 Variation 4
909 Components_21.AR_OVRD Class_3 SelectOperate Variation 4 Variation 4
910 Components_21.NEOC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
911 Components_21.BENZENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
912 Components_21.TOLUENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
DNP3 Data Point List 117
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
913 Components_22.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
914 Components_22.C1_OVRD Class_3 SelectOperate Variation 4 Variation 4
915 Components_22.N2_OVRD Class_3 SelectOperate Variation 4 Variation 4
916 Components_22.CO2_OVRD Class_3 SelectOperate Variation 4 Variation 4
917 Components_22.C2_OVRD Class_3 SelectOperate Variation 4 Variation 4
918 Components_22.C3_OVRD Class_3 SelectOperate Variation 4 Variation 4
919 Components_22.H2O_OVRD Class_3 SelectOperate Variation 4 Variation 4
920 Components_22.H2S_OVRD Class_3 SelectOperate Variation 4 Variation 4
921 Components_22.H2_OVRD Class_3 SelectOperate Variation 4 Variation 4
922 Components_22.CO_OVRD Class_3 SelectOperate Variation 4 Variation 4
923 Components_22.O2_OVRD Class_3 SelectOperate Variation 4 Variation 4
924 Components_22.IC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
925 Components_22.NC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
926 Components_22.IC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
927 Components_22.NC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
928 Components_22.C6_OVRD Class_3 SelectOperate Variation 4 Variation 4
929 Components_22.C7_OVRD Class_3 SelectOperate Variation 4 Variation 4
930 Components_22.C8_OVRD Class_3 SelectOperate Variation 4 Variation 4
931 Components_22.C9_OVRD Class_3 SelectOperate Variation 4 Variation 4
932 Components_22.C10_OVRD Class_3 SelectOperate Variation 4 Variation 4
933 Components_22.HE_OVRD Class_3 SelectOperate Variation 4 Variation 4
934 Components_22.AR_OVRD Class_3 SelectOperate Variation 4 Variation 4
935 Components_22.NEOC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
936 Components_22.BENZENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
937 Components_22.TOLUENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
938 Components_23.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
939 Components_23.C1_OVRD Class_3 SelectOperate Variation 4 Variation 4
940 Components_23.N2_OVRD Class_3 SelectOperate Variation 4 Variation 4
941 Components_23.CO2_OVRD Class_3 SelectOperate Variation 4 Variation 4
942 Components_23.C2_OVRD Class_3 SelectOperate Variation 4 Variation 4
943 Components_23.C3_OVRD Class_3 SelectOperate Variation 4 Variation 4
944 Components_23.H2O_OVRD Class_3 SelectOperate Variation 4 Variation 4
118 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
945 Components_23.H2S_OVRD Class_3 SelectOperate Variation 4 Variation 4
946 Components_23.H2_OVRD Class_3 SelectOperate Variation 4 Variation 4
947 Components_23.CO_OVRD Class_3 SelectOperate Variation 4 Variation 4
948 Components_23.O2_OVRD Class_3 SelectOperate Variation 4 Variation 4
949 Components_23.IC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
950 Components_23.NC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
951 Components_23.IC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
952 Components_23.NC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
953 Components_23.C6_OVRD Class_3 SelectOperate Variation 4 Variation 4
954 Components_23.C7_OVRD Class_3 SelectOperate Variation 4 Variation 4
955 Components_23.C8_OVRD Class_3 SelectOperate Variation 4 Variation 4
956 Components_23.C9_OVRD Class_3 SelectOperate Variation 4 Variation 4
957 Components_23.C10_OVRD Class_3 SelectOperate Variation 4 Variation 4
958 Components_23.HE_OVRD Class_3 SelectOperate Variation 4 Variation 4
959 Components_23.AR_OVRD Class_3 SelectOperate Variation 4 Variation 4
960 Components_23.NEOC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
961 Components_23.BENZENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
962 Components_23.TOLUENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
963 Components_24.USER_MODE Class_3 SelectOperate Variation 2 Variation 2
964 Components_24.C1_OVRD Class_3 SelectOperate Variation 4 Variation 4
965 Components_24.N2_OVRD Class_3 SelectOperate Variation 4 Variation 4
966 Components_24.CO2_OVRD Class_3 SelectOperate Variation 4 Variation 4
967 Components_24.C2_OVRD Class_3 SelectOperate Variation 4 Variation 4
968 Components_24.C3_OVRD Class_3 SelectOperate Variation 4 Variation 4
969 Components_24.H2O_OVRD Class_3 SelectOperate Variation 4 Variation 4
970 Components_24.H2S_OVRD Class_3 SelectOperate Variation 4 Variation 4
971 Components_24.H2_OVRD Class_3 SelectOperate Variation 4 Variation 4
972 Components_24.CO_OVRD Class_3 SelectOperate Variation 4 Variation 4
973 Components_24.O2_OVRD Class_3 SelectOperate Variation 4 Variation 4
974 Components_24.IC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
975 Components_24.NC4_OVRD Class_3 SelectOperate Variation 4 Variation 4
976 Components_24.IC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
DNP3 Data Point List 119
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
977 Components_24.NC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
978 Components_24.C6_OVRD Class_3 SelectOperate Variation 4 Variation 4
979 Components_24.C7_OVRD Class_3 SelectOperate Variation 4 Variation 4
980 Components_24.C8_OVRD Class_3 SelectOperate Variation 4 Variation 4
981 Components_24.C9_OVRD Class_3 SelectOperate Variation 4 Variation 4
982 Components_24.C10_OVRD Class_3 SelectOperate Variation 4 Variation 4
983 Components_24.HE_OVRD Class_3 SelectOperate Variation 4 Variation 4
984 Components_24.AR_OVRD Class_3 SelectOperate Variation 4 Variation 4
985 Components_24.NEOC5_OVRD Class_3 SelectOperate Variation 4 Variation 4
986 Components_24.BENZENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
987 Components_24.TOLUENE_OVRD Class_3 SelectOperate Variation 4 Variation 4
988 IoConfig_2.CHAN_1_SELECT Class_3 SelectOperate Variation 2 Variation 2
989 IoConfig_2.CHAN_2_SELECT Class_3 SelectOperate Variation 2 Variation 2
990 IoConfig_2.CHAN_3_SELECT Class_3 SelectOperate Variation 2 Variation 2
991 IoConfig_2.CHAN_4_SELECT Class_3 SelectOperate Variation 2 Variation 2
992 IoConfig_2.CHAN_5_SELECT Class_3 SelectOperate Variation 2 Variation 2
993 IoConfig_2.CHAN_6_SELECT Class_3 SelectOperate Variation 2 Variation 2
994 IoConfig_2.CHAN_7_SELECT Class_3 SelectOperate Variation 2 Variation 2
995 IoConfig_2.CHAN_8_SELECT Class_3 SelectOperate Variation 2 Variation 2
996 IoConfig_2.CHAN_9_SELECT Class_3 SelectOperate Variation 2 Variation 2
997 IoConfig_2.CHAN_10_SELECT Class_3 SelectOperate Variation 2 Variation 2
998 IoConfig_2.CHAN_11_SELECT Class_3 SelectOperate Variation 2 Variation 2
999 IoConfig_2.CHAN_12_SELECT Class_3 SelectOperate Variation 2 Variation 2
1000 IoConfig_3.CHAN_1_SELECT Class_3 SelectOperate Variation 2 Variation 2
1001 IoConfig_3.CHAN_2_SELECT Class_3 SelectOperate Variation 2 Variation 2
1002 IoConfig_3.CHAN_3_SELECT Class_3 SelectOperate Variation 2 Variation 2
1003 IoConfig_3.CHAN_4_SELECT Class_3 SelectOperate Variation 2 Variation 2
1004 IoConfig_3.CHAN_5_SELECT Class_3 SelectOperate Variation 2 Variation 2
1005 IoConfig_3.CHAN_6_SELECT Class_3 SelectOperate Variation 2 Variation 2
1006 IoConfig_3.CHAN_7_SELECT Class_3 SelectOperate Variation 2 Variation 2
1007 IoConfig_3.CHAN_8_SELECT Class_3 SelectOperate Variation 2 Variation 2
1008 IoConfig_3.CHAN_9_SELECT Class_3 SelectOperate Variation 2 Variation 2
120 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1009 IoConfig_3.CHAN_10_SELECT Class_3 SelectOperate Variation 2 Variation 2
1010 IoConfig_3.CHAN_11_SELECT Class_3 SelectOperate Variation 2 Variation 2
1011 IoConfig_3.CHAN_12_SELECT Class_3 SelectOperate Variation 2 Variation 2
1012 IoConfig_4.CHAN_1_SELECT Class_3 SelectOperate Variation 2 Variation 2
1013 IoConfig_4.CHAN_2_SELECT Class_3 SelectOperate Variation 2 Variation 2
1014 IoConfig_4.CHAN_3_SELECT Class_3 SelectOperate Variation 2 Variation 2
1015 IoConfig_4.CHAN_4_SELECT Class_3 SelectOperate Variation 2 Variation 2
1016 IoConfig_4.CHAN_5_SELECT Class_3 SelectOperate Variation 2 Variation 2
1017 IoConfig_4.CHAN_6_SELECT Class_3 SelectOperate Variation 2 Variation 2
1018 IoConfig_4.CHAN_7_SELECT Class_3 SelectOperate Variation 2 Variation 2
1019 IoConfig_4.CHAN_8_SELECT Class_3 SelectOperate Variation 2 Variation 2
1020 IoConfig_4.CHAN_9_SELECT Class_3 SelectOperate Variation 2 Variation 2
1021 IoConfig_4.CHAN_10_SELECT Class_3 SelectOperate Variation 2 Variation 2
1022 IoConfig_4.CHAN_11_SELECT Class_3 SelectOperate Variation 2 Variation 2
1023 IoConfig_4.CHAN_12_SELECT Class_3 SelectOperate Variation 2 Variation 2
1024 IoConfig_5.CHAN_1_SELECT Class_3 SelectOperate Variation 2 Variation 2
1025 IoConfig_5.CHAN_2_SELECT Class_3 SelectOperate Variation 2 Variation 2
1026 IoConfig_5.CHAN_3_SELECT Class_3 SelectOperate Variation 2 Variation 2
1027 IoConfig_5.CHAN_4_SELECT Class_3 SelectOperate Variation 2 Variation 2
1028 IoConfig_5.CHAN_5_SELECT Class_3 SelectOperate Variation 2 Variation 2
1029 IoConfig_5.CHAN_6_SELECT Class_3 SelectOperate Variation 2 Variation 2
1030 IoConfig_5.CHAN_7_SELECT Class_3 SelectOperate Variation 2 Variation 2
1031 IoConfig_5.CHAN_8_SELECT Class_3 SelectOperate Variation 2 Variation 2
1032 IoConfig_5.CHAN_9_SELECT Class_3 SelectOperate Variation 2 Variation 2
1033 IoConfig_5.CHAN_10_SELECT Class_3 SelectOperate Variation 2 Variation 2
1034 IoConfig_5.CHAN_11_SELECT Class_3 SelectOperate Variation 2 Variation 2
1035 IoConfig_5.CHAN_12_SELECT Class_3 SelectOperate Variation 2 Variation 2
1036 IoConfig_6.CHAN_1_SELECT Class_3 SelectOperate Variation 2 Variation 2
1037 IoConfig_6.CHAN_2_SELECT Class_3 SelectOperate Variation 2 Variation 2
1038 IoConfig_6.CHAN_3_SELECT Class_3 SelectOperate Variation 2 Variation 2
1039 IoConfig_6.CHAN_4_SELECT Class_3 SelectOperate Variation 2 Variation 2
1040 IoConfig_6.CHAN_5_SELECT Class_3 SelectOperate Variation 2 Variation 2
DNP3 Data Point List 121
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1041 IoConfig_6.CHAN_6_SELECT Class_3 SelectOperate Variation 2 Variation 2
1042 IoConfig_6.CHAN_7_SELECT Class_3 SelectOperate Variation 2 Variation 2
1043 IoConfig_6.CHAN_8_SELECT Class_3 SelectOperate Variation 2 Variation 2
1044 IoConfig_6.CHAN_9_SELECT Class_3 SelectOperate Variation 2 Variation 2
1045 IoConfig_6.CHAN_10_SELECT Class_3 SelectOperate Variation 2 Variation 2
1046 IoConfig_6.CHAN_11_SELECT Class_3 SelectOperate Variation 2 Variation 2
1047 IoConfig_6.CHAN_12_SELECT Class_3 SelectOperate Variation 2 Variation 2
1048 IoConfig_7.CHAN_1_SELECT Class_3 SelectOperate Variation 2 Variation 2
1049 IoConfig_7.CHAN_2_SELECT Class_3 SelectOperate Variation 2 Variation 2
1050 IoConfig_7.CHAN_3_SELECT Class_3 SelectOperate Variation 2 Variation 2
1051 IoConfig_7.CHAN_4_SELECT Class_3 SelectOperate Variation 2 Variation 2
1052 IoConfig_7.CHAN_5_SELECT Class_3 SelectOperate Variation 2 Variation 2
1053 IoConfig_7.CHAN_6_SELECT Class_3 SelectOperate Variation 2 Variation 2
1054 IoConfig_7.CHAN_7_SELECT Class_3 SelectOperate Variation 2 Variation 2
1055 IoConfig_7.CHAN_8_SELECT Class_3 SelectOperate Variation 2 Variation 2
1056 IoConfig_7.CHAN_9_SELECT Class_3 SelectOperate Variation 2 Variation 2
1057 IoConfig_7.CHAN_10_SELECT Class_3 SelectOperate Variation 2 Variation 2
1058 IoConfig_7.CHAN_11_SELECT Class_3 SelectOperate Variation 2 Variation 2
1059 IoConfig_7.CHAN_12_SELECT Class_3 SelectOperate Variation 2 Variation 2
1060 IoConfig_8.CHAN_1_SELECT Class_3 SelectOperate Variation 2 Variation 2
1061 IoConfig_8.CHAN_2_SELECT Class_3 SelectOperate Variation 2 Variation 2
1062 IoConfig_8.CHAN_3_SELECT Class_3 SelectOperate Variation 2 Variation 2
1063 IoConfig_8.CHAN_4_SELECT Class_3 SelectOperate Variation 2 Variation 2
1064 IoConfig_8.CHAN_5_SELECT Class_3 SelectOperate Variation 2 Variation 2
1065 IoConfig_8.CHAN_6_SELECT Class_3 SelectOperate Variation 2 Variation 2
1066 IoConfig_8.CHAN_7_SELECT Class_3 SelectOperate Variation 2 Variation 2
1067 IoConfig_8.CHAN_8_SELECT Class_3 SelectOperate Variation 2 Variation 2
1068 IoConfig_8.CHAN_9_SELECT Class_3 SelectOperate Variation 2 Variation 2
1069 IoConfig_8.CHAN_10_SELECT Class_3 SelectOperate Variation 2 Variation 2
1070 IoConfig_8.CHAN_11_SELECT Class_3 SelectOperate Variation 2 Variation 2
1071 IoConfig_8.CHAN_12_SELECT Class_3 SelectOperate Variation 2 Variation 2
1072 User Data_1.FLOAT_1 None SelectOperate Variation 3 Variation 3
122 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1073 User Data_1.FLOAT_2 None SelectOperate Variation 3 Variation 3
1074 User Data_1.FLOAT_3 None SelectOperate Variation 3 Variation 3
1075 User Data_1.FLOAT_4 None SelectOperate Variation 3 Variation 3
1076 User Data_1.FLOAT_5 None SelectOperate Variation 3 Variation 3
1077 User Data_1.FLOAT_6 None SelectOperate Variation 3 Variation 3
1078 User Data_1.FLOAT_7 None SelectOperate Variation 3 Variation 3
1079 User Data_1.FLOAT_8 None SelectOperate Variation 3 Variation 3
1080 User Data_1.FLOAT_9 None SelectOperate Variation 3 Variation 3
1081 User Data_1.FLOAT_10 None SelectOperate Variation 3 Variation 3
1082 User Data_1.FLOAT_11 None SelectOperate Variation 3 Variation 3
1083 User Data_1.FLOAT_12 None SelectOperate Variation 3 Variation 3
1084 User Data_1.FLOAT_13 None SelectOperate Variation 3 Variation 3
1085 User Data_1.FLOAT_14 None SelectOperate Variation 3 Variation 3
1086 User Data_1.FLOAT_15 None SelectOperate Variation 3 Variation 3
1087 User Data_1.FLOAT_16 None SelectOperate Variation 3 Variation 3
1088 User Data_1.FLOAT_17 None SelectOperate Variation 3 Variation 3
1089 User Data_1.FLOAT_18 None SelectOperate Variation 3 Variation 3
1090 User Data_1.FLOAT_19 None SelectOperate Variation 3 Variation 3
1091 User Data_1.FLOAT_20 None SelectOperate Variation 3 Variation 3
1092 User Data_1.DOUBLE_1 None SelectOperate Variation 4 Variation 4
1093 User Data_1.DOUBLE_2 None SelectOperate Variation 4 Variation 4
1094 User Data_1.DOUBLE_3 None SelectOperate Variation 4 Variation 4
1095 User Data_1.DOUBLE_4 None SelectOperate Variation 4 Variation 4
1096 User Data_1.DOUBLE_5 None SelectOperate Variation 4 Variation 4
1097 User Data_1.DOUBLE_6 None SelectOperate Variation 4 Variation 4
1098 User Data_1.DOUBLE_7 None SelectOperate Variation 4 Variation 4
1099 User Data_1.DOUBLE_8 None SelectOperate Variation 4 Variation 4
1100 User Data_1.DOUBLE_9 None SelectOperate Variation 4 Variation 4
1101 User Data_1.DOUBLE_10 None SelectOperate Variation 4 Variation 4
1102 User Data_1.LONG_1 None SelectOperate Variation 1 Variation 1
1103 User Data_1.LONG_2 None SelectOperate Variation 1 Variation 1
1104 User Data_1.LONG_3 None SelectOperate Variation 1 Variation 1
DNP3 Data Point List 123
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1105 User Data_1.LONG_4 None SelectOperate Variation 1 Variation 1
1106 User Data_1.LONG_5 None SelectOperate Variation 1 Variation 1
1107 User Data_1.LONG_6 None SelectOperate Variation 1 Variation 1
1108 User Data_1.LONG_7 None SelectOperate Variation 1 Variation 1
1109 User Data_1.LONG_8 None SelectOperate Variation 1 Variation 1
1110 User Data_1.LONG_9 None SelectOperate Variation 1 Variation 1
1111 User Data_1.LONG_10 None SelectOperate Variation 1 Variation 1
1112 User Data_1.SHORT_1 None SelectOperate Variation 2 Variation 2
1113 User Data_1.SHORT_2 None SelectOperate Variation 2 Variation 2
1114 User Data_1.SHORT_3 None SelectOperate Variation 2 Variation 2
1115 User Data_1.SHORT_4 None SelectOperate Variation 2 Variation 2
1116 User Data_1.SHORT_5 None SelectOperate Variation 2 Variation 2
1117 User Data_1.SHORT_6 None SelectOperate Variation 2 Variation 2
1118 User Data_1.SHORT_7 None SelectOperate Variation 2 Variation 2
1119 User Data_1.SHORT_8 None SelectOperate Variation 2 Variation 2
1120 User Data_1.SHORT_9 None SelectOperate Variation 2 Variation 2
1121 User Data_1.SHORT_10 None SelectOperate Variation 2 Variation 2
1122 User Data_1.BYTE_1 None SelectOperate Variation 2 Variation 2
1123 User Data_1.BYTE_2 None SelectOperate Variation 2 Variation 2
1124 User Data_1.BYTE_3 None SelectOperate Variation 2 Variation 2
1125 User Data_1.BYTE_4 None SelectOperate Variation 2 Variation 2
1126 User Data_1.BYTE_5 None SelectOperate Variation 2 Variation 2
1127 User Data_1.BYTE_6 None SelectOperate Variation 2 Variation 2
1128 User Data_1.BYTE_7 None SelectOperate Variation 2 Variation 2
1129 User Data_1.BYTE_8 None SelectOperate Variation 2 Variation 2
1130 User Data_1.BYTE_9 None SelectOperate Variation 2 Variation 2
1131 User Data_1.BYTE_10 None SelectOperate Variation 2 Variation 2
1132 User Data_2.FLOAT_1 None SelectOperate Variation 3 Variation 3
1133 User Data_2.FLOAT_2 None SelectOperate Variation 3 Variation 3
1134 User Data_2.FLOAT_3 None SelectOperate Variation 3 Variation 3
1135 User Data_2.FLOAT_4 None SelectOperate Variation 3 Variation 3
1136 User Data_2.FLOAT_5 None SelectOperate Variation 3 Variation 3
124 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1137 User Data_2.FLOAT_6 None SelectOperate Variation 3 Variation 3
1138 User Data_2.FLOAT_7 None SelectOperate Variation 3 Variation 3
1139 User Data_2.FLOAT_8 None SelectOperate Variation 3 Variation 3
1140 User Data_2.FLOAT_9 None SelectOperate Variation 3 Variation 3
1141 User Data_2.FLOAT_10 None SelectOperate Variation 3 Variation 3
1142 User Data_2.FLOAT_11 None SelectOperate Variation 3 Variation 3
1143 User Data_2.FLOAT_12 None SelectOperate Variation 3 Variation 3
1144 User Data_2.FLOAT_13 None SelectOperate Variation 3 Variation 3
1145 User Data_2.FLOAT_14 None SelectOperate Variation 3 Variation 3
1146 User Data_2.FLOAT_15 None SelectOperate Variation 3 Variation 3
1147 User Data_2.FLOAT_16 None SelectOperate Variation 3 Variation 3
1148 User Data_2.FLOAT_17 None SelectOperate Variation 3 Variation 3
1149 User Data_2.FLOAT_18 None SelectOperate Variation 3 Variation 3
1150 User Data_2.FLOAT_19 None SelectOperate Variation 3 Variation 3
1151 User Data_2.FLOAT_20 None SelectOperate Variation 3 Variation 3
1152 User Data_2.DOUBLE_1 None SelectOperate Variation 4 Variation 4
1153 User Data_2.DOUBLE_2 None SelectOperate Variation 4 Variation 4
1154 User Data_2.DOUBLE_3 None SelectOperate Variation 4 Variation 4
1155 User Data_2.DOUBLE_4 None SelectOperate Variation 4 Variation 4
1156 User Data_2.DOUBLE_5 None SelectOperate Variation 4 Variation 4
1157 User Data_2.DOUBLE_6 None SelectOperate Variation 4 Variation 4
1158 User Data_2.DOUBLE_7 None SelectOperate Variation 4 Variation 4
1159 User Data_2.DOUBLE_8 None SelectOperate Variation 4 Variation 4
1160 User Data_2.DOUBLE_9 None SelectOperate Variation 4 Variation 4
1161 User Data_2.DOUBLE_10 None SelectOperate Variation 4 Variation 4
1162 User Data_2.LONG_1 None SelectOperate Variation 1 Variation 1
1163 User Data_2.LONG_2 None SelectOperate Variation 1 Variation 1
1164 User Data_2.LONG_3 None SelectOperate Variation 1 Variation 1
1165 User Data_2.LONG_4 None SelectOperate Variation 1 Variation 1
1166 User Data_2.LONG_5 None SelectOperate Variation 1 Variation 1
1167 User Data_2.LONG_6 None SelectOperate Variation 1 Variation 1
1168 User Data_2.LONG_7 None SelectOperate Variation 1 Variation 1
DNP3 Data Point List 125
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1169 User Data_2.LONG_8 None SelectOperate Variation 1 Variation 1
1170 User Data_2.LONG_9 None SelectOperate Variation 1 Variation 1
1171 User Data_2.LONG_10 None SelectOperate Variation 1 Variation 1
1172 User Data_2.SHORT_1 None SelectOperate Variation 2 Variation 2
1173 User Data_2.SHORT_2 None SelectOperate Variation 2 Variation 2
1174 User Data_2.SHORT_3 None SelectOperate Variation 2 Variation 2
1175 User Data_2.SHORT_4 None SelectOperate Variation 2 Variation 2
1176 User Data_2.SHORT_5 None SelectOperate Variation 2 Variation 2
1177 User Data_2.SHORT_6 None SelectOperate Variation 2 Variation 2
1178 User Data_2.SHORT_7 None SelectOperate Variation 2 Variation 2
1179 User Data_2.SHORT_8 None SelectOperate Variation 2 Variation 2
1180 User Data_2.SHORT_9 None SelectOperate Variation 2 Variation 2
1181 User Data_2.SHORT_10 None SelectOperate Variation 2 Variation 2
1182 User Data_2.BYTE_1 None SelectOperate Variation 2 Variation 2
1183 User Data_2.BYTE_2 None SelectOperate Variation 2 Variation 2
1184 User Data_2.BYTE_3 None SelectOperate Variation 2 Variation 2
1185 User Data_2.BYTE_4 None SelectOperate Variation 2 Variation 2
1186 User Data_2.BYTE_5 None SelectOperate Variation 2 Variation 2
1187 User Data_2.BYTE_6 None SelectOperate Variation 2 Variation 2
1188 User Data_2.BYTE_7 None SelectOperate Variation 2 Variation 2
1189 User Data_2.BYTE_8 None SelectOperate Variation 2 Variation 2
1190 User Data_2.BYTE_9 None SelectOperate Variation 2 Variation 2
1191 User Data_2.BYTE_10 None SelectOperate Variation 2 Variation 2
1192 User Data_3.FLOAT_1 None SelectOperate Variation 3 Variation 3
1193 User Data_3.FLOAT_2 None SelectOperate Variation 3 Variation 3
1194 User Data_3.FLOAT_3 None SelectOperate Variation 3 Variation 3
1195 User Data_3.FLOAT_4 None SelectOperate Variation 3 Variation 3
1196 User Data_3.FLOAT_5 None SelectOperate Variation 3 Variation 3
1197 User Data_3.FLOAT_6 None SelectOperate Variation 3 Variation 3
1198 User Data_3.FLOAT_7 None SelectOperate Variation 3 Variation 3
1199 User Data_3.FLOAT_8 None SelectOperate Variation 3 Variation 3
1200 User Data_3.FLOAT_9 None SelectOperate Variation 3 Variation 3
126 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1201 User Data_3.FLOAT_10 None SelectOperate Variation 3 Variation 3
1202 User Data_3.FLOAT_11 None SelectOperate Variation 3 Variation 3
1203 User Data_3.FLOAT_12 None SelectOperate Variation 3 Variation 3
1204 User Data_3.FLOAT_13 None SelectOperate Variation 3 Variation 3
1205 User Data_3.FLOAT_14 None SelectOperate Variation 3 Variation 3
1206 User Data_3.FLOAT_15 None SelectOperate Variation 3 Variation 3
1207 User Data_3.FLOAT_16 None SelectOperate Variation 3 Variation 3
1208 User Data_3.FLOAT_17 None SelectOperate Variation 3 Variation 3
1209 User Data_3.FLOAT_18 None SelectOperate Variation 3 Variation 3
1210 User Data_3.FLOAT_19 None SelectOperate Variation 3 Variation 3
1211 User Data_3.FLOAT_20 None SelectOperate Variation 3 Variation 3
1212 User Data_3.DOUBLE_1 None SelectOperate Variation 4 Variation 4
1213 User Data_3.DOUBLE_2 None SelectOperate Variation 4 Variation 4
1214 User Data_3.DOUBLE_3 None SelectOperate Variation 4 Variation 4
1215 User Data_3.DOUBLE_4 None SelectOperate Variation 4 Variation 4
1216 User Data_3.DOUBLE_5 None SelectOperate Variation 4 Variation 4
1217 User Data_3.DOUBLE_6 None SelectOperate Variation 4 Variation 4
1218 User Data_3.DOUBLE_7 None SelectOperate Variation 4 Variation 4
1219 User Data_3.DOUBLE_8 None SelectOperate Variation 4 Variation 4
1220 User Data_3.DOUBLE_9 None SelectOperate Variation 4 Variation 4
1221 User Data_3.DOUBLE_10 None SelectOperate Variation 4 Variation 4
1222 User Data_3.LONG_1 None SelectOperate Variation 1 Variation 1
1223 User Data_3.LONG_2 None SelectOperate Variation 1 Variation 1
1224 User Data_3.LONG_3 None SelectOperate Variation 1 Variation 1
1225 User Data_3.LONG_4 None SelectOperate Variation 1 Variation 1
1226 User Data_3.LONG_5 None SelectOperate Variation 1 Variation 1
1227 User Data_3.LONG_6 None SelectOperate Variation 1 Variation 1
1228 User Data_3.LONG_7 None SelectOperate Variation 1 Variation 1
1229 User Data_3.LONG_8 None SelectOperate Variation 1 Variation 1
1230 User Data_3.LONG_9 None SelectOperate Variation 1 Variation 1
1231 User Data_3.LONG_10 None SelectOperate Variation 1 Variation 1
1232 User Data_3.SHORT_1 None SelectOperate Variation 2 Variation 2
DNP3 Data Point List 127
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1233 User Data_3.SHORT_2 None SelectOperate Variation 2 Variation 2
1234 User Data_3.SHORT_3 None SelectOperate Variation 2 Variation 2
1235 User Data_3.SHORT_4 None SelectOperate Variation 2 Variation 2
1236 User Data_3.SHORT_5 None SelectOperate Variation 2 Variation 2
1237 User Data_3.SHORT_6 None SelectOperate Variation 2 Variation 2
1238 User Data_3.SHORT_7 None SelectOperate Variation 2 Variation 2
1239 User Data_3.SHORT_8 None SelectOperate Variation 2 Variation 2
1240 User Data_3.SHORT_9 None SelectOperate Variation 2 Variation 2
1241 User Data_3.SHORT_10 None SelectOperate Variation 2 Variation 2
1242 User Data_3.BYTE_1 None SelectOperate Variation 2 Variation 2
1243 User Data_3.BYTE_2 None SelectOperate Variation 2 Variation 2
1244 User Data_3.BYTE_3 None SelectOperate Variation 2 Variation 2
1245 User Data_3.BYTE_4 None SelectOperate Variation 2 Variation 2
1246 User Data_3.BYTE_5 None SelectOperate Variation 2 Variation 2
1247 User Data_3.BYTE_6 None SelectOperate Variation 2 Variation 2
1248 User Data_3.BYTE_7 None SelectOperate Variation 2 Variation 2
1249 User Data_3.BYTE_8 None SelectOperate Variation 2 Variation 2
1250 User Data_3.BYTE_9 None SelectOperate Variation 2 Variation 2
1251 User Data_3.BYTE_10 None SelectOperate Variation 2 Variation 2
1252 User Data_4.FLOAT_1 None SelectOperate Variation 3 Variation 3
1253 User Data_4.FLOAT_2 None SelectOperate Variation 3 Variation 3
1254 User Data_4.FLOAT_3 None SelectOperate Variation 3 Variation 3
1255 User Data_4.FLOAT_4 None SelectOperate Variation 3 Variation 3
1256 User Data_4.FLOAT_5 None SelectOperate Variation 3 Variation 3
1257 User Data_4.FLOAT_6 None SelectOperate Variation 3 Variation 3
1258 User Data_4.FLOAT_7 None SelectOperate Variation 3 Variation 3
1259 User Data_4.FLOAT_8 None SelectOperate Variation 3 Variation 3
1260 User Data_4.FLOAT_9 None SelectOperate Variation 3 Variation 3
1261 User Data_4.FLOAT_10 None SelectOperate Variation 3 Variation 3
1262 User Data_4.FLOAT_11 None SelectOperate Variation 3 Variation 3
1263 User Data_4.FLOAT_12 None SelectOperate Variation 3 Variation 3
1264 User Data_4.FLOAT_13 None SelectOperate Variation 3 Variation 3
128 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1265 User Data_4.FLOAT_14 None SelectOperate Variation 3 Variation 3
1266 User Data_4.FLOAT_15 None SelectOperate Variation 3 Variation 3
1267 User Data_4.FLOAT_16 None SelectOperate Variation 3 Variation 3
1268 User Data_4.FLOAT_17 None SelectOperate Variation 3 Variation 3
1269 User Data_4.FLOAT_18 None SelectOperate Variation 3 Variation 3
1270 User Data_4.FLOAT_19 None SelectOperate Variation 3 Variation 3
1271 User Data_4.FLOAT_20 None SelectOperate Variation 3 Variation 3
1272 User Data_4.DOUBLE_1 None SelectOperate Variation 4 Variation 4
1273 User Data_4.DOUBLE_2 None SelectOperate Variation 4 Variation 4
1274 User Data_4.DOUBLE_3 None SelectOperate Variation 4 Variation 4
1275 User Data_4.DOUBLE_4 None SelectOperate Variation 4 Variation 4
1276 User Data_4.DOUBLE_5 None SelectOperate Variation 4 Variation 4
1277 User Data_4.DOUBLE_6 None SelectOperate Variation 4 Variation 4
1278 User Data_4.DOUBLE_7 None SelectOperate Variation 4 Variation 4
1279 User Data_4.DOUBLE_8 None SelectOperate Variation 4 Variation 4
1280 User Data_4.DOUBLE_9 None SelectOperate Variation 4 Variation 4
1281 User Data_4.DOUBLE_10 None SelectOperate Variation 4 Variation 4
1282 User Data_4.LONG_1 None SelectOperate Variation 1 Variation 1
1283 User Data_4.LONG_2 None SelectOperate Variation 1 Variation 1
1284 User Data_4.LONG_3 None SelectOperate Variation 1 Variation 1
1285 User Data_4.LONG_4 None SelectOperate Variation 1 Variation 1
1286 User Data_4.LONG_5 None SelectOperate Variation 1 Variation 1
1287 User Data_4.LONG_6 None SelectOperate Variation 1 Variation 1
1288 User Data_4.LONG_7 None SelectOperate Variation 1 Variation 1
1289 User Data_4.LONG_8 None SelectOperate Variation 1 Variation 1
1290 User Data_4.LONG_9 None SelectOperate Variation 1 Variation 1
1291 User Data_4.LONG_10 None SelectOperate Variation 1 Variation 1
1292 User Data_4.SHORT_1 None SelectOperate Variation 2 Variation 2
1293 User Data_4.SHORT_2 None SelectOperate Variation 2 Variation 2
1294 User Data_4.SHORT_3 None SelectOperate Variation 2 Variation 2
1295 User Data_4.SHORT_4 None SelectOperate Variation 2 Variation 2
1296 User Data_4.SHORT_5 None SelectOperate Variation 2 Variation 2
DNP3 Data Point List 129
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1297 User Data_4.SHORT_6 None SelectOperate Variation 2 Variation 2
1298 User Data_4.SHORT_7 None SelectOperate Variation 2 Variation 2
1299 User Data_4.SHORT_8 None SelectOperate Variation 2 Variation 2
1300 User Data_4.SHORT_9 None SelectOperate Variation 2 Variation 2
1301 User Data_4.SHORT_10 None SelectOperate Variation 2 Variation 2
1302 User Data_4.BYTE_1 None SelectOperate Variation 2 Variation 2
1303 User Data_4.BYTE_2 None SelectOperate Variation 2 Variation 2
1304 User Data_4.BYTE_3 None SelectOperate Variation 2 Variation 2
1305 User Data_4.BYTE_4 None SelectOperate Variation 2 Variation 2
1306 User Data_4.BYTE_5 None SelectOperate Variation 2 Variation 2
1307 User Data_4.BYTE_6 None SelectOperate Variation 2 Variation 2
1308 User Data_4.BYTE_7 None SelectOperate Variation 2 Variation 2
1309 User Data_4.BYTE_8 None SelectOperate Variation 2 Variation 2
1310 User Data_4.BYTE_9 None SelectOperate Variation 2 Variation 2
1311 User Data_4.BYTE_10 None SelectOperate Variation 2 Variation 2
1312 User Data_5.FLOAT_1 None SelectOperate Variation 3 Variation 3
1313 User Data_5.FLOAT_2 None SelectOperate Variation 3 Variation 3
1314 User Data_5.FLOAT_3 None SelectOperate Variation 3 Variation 3
1315 User Data_5.FLOAT_4 None SelectOperate Variation 3 Variation 3
1316 User Data_5.FLOAT_5 None SelectOperate Variation 3 Variation 3
1317 User Data_5.FLOAT_6 None SelectOperate Variation 3 Variation 3
1318 User Data_5.FLOAT_7 None SelectOperate Variation 3 Variation 3
1319 User Data_5.FLOAT_8 None SelectOperate Variation 3 Variation 3
1320 User Data_5.FLOAT_9 None SelectOperate Variation 3 Variation 3
1321 User Data_5.FLOAT_10 None SelectOperate Variation 3 Variation 3
1322 User Data_5.FLOAT_11 None SelectOperate Variation 3 Variation 3
1323 User Data_5.FLOAT_12 None SelectOperate Variation 3 Variation 3
1324 User Data_5.FLOAT_13 None SelectOperate Variation 3 Variation 3
1325 User Data_5.FLOAT_14 None SelectOperate Variation 3 Variation 3
1326 User Data_5.FLOAT_15 None SelectOperate Variation 3 Variation 3
1327 User Data_5.FLOAT_16 None SelectOperate Variation 3 Variation 3
1328 User Data_5.FLOAT_17 None SelectOperate Variation 3 Variation 3
130 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1329 User Data_5.FLOAT_18 None SelectOperate Variation 3 Variation 3
1330 User Data_5.FLOAT_19 None SelectOperate Variation 3 Variation 3
1331 User Data_5.FLOAT_20 None SelectOperate Variation 3 Variation 3
1332 User Data_5.DOUBLE_1 None SelectOperate Variation 4 Variation 4
1333 User Data_5.DOUBLE_2 None SelectOperate Variation 4 Variation 4
1334 User Data_5.DOUBLE_3 None SelectOperate Variation 4 Variation 4
1335 User Data_5.DOUBLE_4 None SelectOperate Variation 4 Variation 4
1336 User Data_5.DOUBLE_5 None SelectOperate Variation 4 Variation 4
1337 User Data_5.DOUBLE_6 None SelectOperate Variation 4 Variation 4
1338 User Data_5.DOUBLE_7 None SelectOperate Variation 4 Variation 4
1339 User Data_5.DOUBLE_8 None SelectOperate Variation 4 Variation 4
1340 User Data_5.DOUBLE_9 None SelectOperate Variation 4 Variation 4
1341 User Data_5.DOUBLE_10 None SelectOperate Variation 4 Variation 4
1342 User Data_5.LONG_1 None SelectOperate Variation 1 Variation 1
1343 User Data_5.LONG_2 None SelectOperate Variation 1 Variation 1
1344 User Data_5.LONG_3 None SelectOperate Variation 1 Variation 1
1345 User Data_5.LONG_4 None SelectOperate Variation 1 Variation 1
1346 User Data_5.LONG_5 None SelectOperate Variation 1 Variation 1
1347 User Data_5.LONG_6 None SelectOperate Variation 1 Variation 1
1348 User Data_5.LONG_7 None SelectOperate Variation 1 Variation 1
1349 User Data_5.LONG_8 None SelectOperate Variation 1 Variation 1
1350 User Data_5.LONG_9 None SelectOperate Variation 1 Variation 1
1351 User Data_5.LONG_10 None SelectOperate Variation 1 Variation 1
1352 User Data_5.SHORT_1 None SelectOperate Variation 2 Variation 2
1353 User Data_5.SHORT_2 None SelectOperate Variation 2 Variation 2
1354 User Data_5.SHORT_3 None SelectOperate Variation 2 Variation 2
1355 User Data_5.SHORT_4 None SelectOperate Variation 2 Variation 2
1356 User Data_5.SHORT_5 None SelectOperate Variation 2 Variation 2
1357 User Data_5.SHORT_6 None SelectOperate Variation 2 Variation 2
1358 User Data_5.SHORT_7 None SelectOperate Variation 2 Variation 2
1359 User Data_5.SHORT_8 None SelectOperate Variation 2 Variation 2
1360 User Data_5.SHORT_9 None SelectOperate Variation 2 Variation 2
DNP3 Data Point List 131
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1361 User Data_5.SHORT_10 None SelectOperate Variation 2 Variation 2
1362 User Data_5.BYTE_1 None SelectOperate Variation 2 Variation 2
1363 User Data_5.BYTE_2 None SelectOperate Variation 2 Variation 2
1364 User Data_5.BYTE_3 None SelectOperate Variation 2 Variation 2
1365 User Data_5.BYTE_4 None SelectOperate Variation 2 Variation 2
1366 User Data_5.BYTE_5 None SelectOperate Variation 2 Variation 2
1367 User Data_5.BYTE_6 None SelectOperate Variation 2 Variation 2
1368 User Data_5.BYTE_7 None SelectOperate Variation 2 Variation 2
1369 User Data_5.BYTE_8 None SelectOperate Variation 2 Variation 2
1370 User Data_5.BYTE_9 None SelectOperate Variation 2 Variation 2
1371 User Data_5.BYTE_10 None SelectOperate Variation 2 Variation 2
1372 User Data_6.FLOAT_1 None SelectOperate Variation 3 Variation 3
1373 User Data_6.FLOAT_2 None SelectOperate Variation 3 Variation 3
1374 User Data_6.FLOAT_3 None SelectOperate Variation 3 Variation 3
1375 User Data_6.FLOAT_4 None SelectOperate Variation 3 Variation 3
1376 User Data_6.FLOAT_5 None SelectOperate Variation 3 Variation 3
1377 User Data_6.FLOAT_6 None SelectOperate Variation 3 Variation 3
1378 User Data_6.FLOAT_7 None SelectOperate Variation 3 Variation 3
1379 User Data_6.FLOAT_8 None SelectOperate Variation 3 Variation 3
1380 User Data_6.FLOAT_9 None SelectOperate Variation 3 Variation 3
1381 User Data_6.FLOAT_10 None SelectOperate Variation 3 Variation 3
1382 User Data_6.FLOAT_11 None SelectOperate Variation 3 Variation 3
1383 User Data_6.FLOAT_12 None SelectOperate Variation 3 Variation 3
1384 User Data_6.FLOAT_13 None SelectOperate Variation 3 Variation 3
1385 User Data_6.FLOAT_14 None SelectOperate Variation 3 Variation 3
1386 User Data_6.FLOAT_15 None SelectOperate Variation 3 Variation 3
1387 User Data_6.FLOAT_16 None SelectOperate Variation 3 Variation 3
1388 User Data_6.FLOAT_17 None SelectOperate Variation 3 Variation 3
1389 User Data_6.FLOAT_18 None SelectOperate Variation 3 Variation 3
1390 User Data_6.FLOAT_19 None SelectOperate Variation 3 Variation 3
1391 User Data_6.FLOAT_20 None SelectOperate Variation 3 Variation 3
1392 User Data_6.DOUBLE_1 None SelectOperate Variation 4 Variation 4
132 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1393 User Data_6.DOUBLE_2 None SelectOperate Variation 4 Variation 4
1394 User Data_6.DOUBLE_3 None SelectOperate Variation 4 Variation 4
1395 User Data_6.DOUBLE_4 None SelectOperate Variation 4 Variation 4
1396 User Data_6.DOUBLE_5 None SelectOperate Variation 4 Variation 4
1397 User Data_6.DOUBLE_6 None SelectOperate Variation 4 Variation 4
1398 User Data_6.DOUBLE_7 None SelectOperate Variation 4 Variation 4
1399 User Data_6.DOUBLE_8 None SelectOperate Variation 4 Variation 4
1400 User Data_6.DOUBLE_9 None SelectOperate Variation 4 Variation 4
1401 User Data_6.DOUBLE_10 None SelectOperate Variation 4 Variation 4
1402 User Data_6.LONG_1 None SelectOperate Variation 1 Variation 1
1403 User Data_6.LONG_2 None SelectOperate Variation 1 Variation 1
1404 User Data_6.LONG_3 None SelectOperate Variation 1 Variation 1
1405 User Data_6.LONG_4 None SelectOperate Variation 1 Variation 1
1406 User Data_6.LONG_5 None SelectOperate Variation 1 Variation 1
1407 User Data_6.LONG_6 None SelectOperate Variation 1 Variation 1
1408 User Data_6.LONG_7 None SelectOperate Variation 1 Variation 1
1409 User Data_6.LONG_8 None SelectOperate Variation 1 Variation 1
1410 User Data_6.LONG_9 None SelectOperate Variation 1 Variation 1
1411 User Data_6.LONG_10 None SelectOperate Variation 1 Variation 1
1412 User Data_6.SHORT_1 None SelectOperate Variation 2 Variation 2
1413 User Data_6.SHORT_2 None SelectOperate Variation 2 Variation 2
1414 User Data_6.SHORT_3 None SelectOperate Variation 2 Variation 2
1415 User Data_6.SHORT_4 None SelectOperate Variation 2 Variation 2
1416 User Data_6.SHORT_5 None SelectOperate Variation 2 Variation 2
1417 User Data_6.SHORT_6 None SelectOperate Variation 2 Variation 2
1418 User Data_6.SHORT_7 None SelectOperate Variation 2 Variation 2
1419 User Data_6.SHORT_8 None SelectOperate Variation 2 Variation 2
1420 User Data_6.SHORT_9 None SelectOperate Variation 2 Variation 2
1421 User Data_6.SHORT_10 None SelectOperate Variation 2 Variation 2
1422 User Data_6.BYTE_1 None SelectOperate Variation 2 Variation 2
1423 User Data_6.BYTE_2 None SelectOperate Variation 2 Variation 2
1424 User Data_6.BYTE_3 None SelectOperate Variation 2 Variation 2
DNP3 Data Point List 133
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1425 User Data_6.BYTE_4 None SelectOperate Variation 2 Variation 2
1426 User Data_6.BYTE_5 None SelectOperate Variation 2 Variation 2
1427 User Data_6.BYTE_6 None SelectOperate Variation 2 Variation 2
1428 User Data_6.BYTE_7 None SelectOperate Variation 2 Variation 2
1429 User Data_6.BYTE_8 None SelectOperate Variation 2 Variation 2
1430 User Data_6.BYTE_9 None SelectOperate Variation 2 Variation 2
1431 User Data_6.BYTE_10 None SelectOperate Variation 2 Variation 2
1432 User Data_7.FLOAT_1 None SelectOperate Variation 3 Variation 3
1433 User Data_7.FLOAT_2 None SelectOperate Variation 3 Variation 3
1434 User Data_7.FLOAT_3 None SelectOperate Variation 3 Variation 3
1435 User Data_7.FLOAT_4 None SelectOperate Variation 3 Variation 3
1436 User Data_7.FLOAT_5 None SelectOperate Variation 3 Variation 3
1437 User Data_7.FLOAT_6 None SelectOperate Variation 3 Variation 3
1438 User Data_7.FLOAT_7 None SelectOperate Variation 3 Variation 3
1439 User Data_7.FLOAT_8 None SelectOperate Variation 3 Variation 3
1440 User Data_7.FLOAT_9 None SelectOperate Variation 3 Variation 3
1441 User Data_7.FLOAT_10 None SelectOperate Variation 3 Variation 3
1442 User Data_7.FLOAT_11 None SelectOperate Variation 3 Variation 3
1443 User Data_7.FLOAT_12 None SelectOperate Variation 3 Variation 3
1444 User Data_7.FLOAT_13 None SelectOperate Variation 3 Variation 3
1445 User Data_7.FLOAT_14 None SelectOperate Variation 3 Variation 3
1446 User Data_7.FLOAT_15 None SelectOperate Variation 3 Variation 3
1447 User Data_7.FLOAT_16 None SelectOperate Variation 3 Variation 3
1448 User Data_7.FLOAT_17 None SelectOperate Variation 3 Variation 3
1449 User Data_7.FLOAT_18 None SelectOperate Variation 3 Variation 3
1450 User Data_7.FLOAT_19 None SelectOperate Variation 3 Variation 3
1451 User Data_7.FLOAT_20 None SelectOperate Variation 3 Variation 3
1452 User Data_7.DOUBLE_1 None SelectOperate Variation 4 Variation 4
1453 User Data_7.DOUBLE_2 None SelectOperate Variation 4 Variation 4
1454 User Data_7.DOUBLE_3 None SelectOperate Variation 4 Variation 4
1455 User Data_7.DOUBLE_4 None SelectOperate Variation 4 Variation 4
1456 User Data_7.DOUBLE_5 None SelectOperate Variation 4 Variation 4
134 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1457 User Data_7.DOUBLE_6 None SelectOperate Variation 4 Variation 4
1458 User Data_7.DOUBLE_7 None SelectOperate Variation 4 Variation 4
1459 User Data_7.DOUBLE_8 None SelectOperate Variation 4 Variation 4
1460 User Data_7.DOUBLE_9 None SelectOperate Variation 4 Variation 4
1461 User Data_7.DOUBLE_10 None SelectOperate Variation 4 Variation 4
1462 User Data_7.LONG_1 None SelectOperate Variation 1 Variation 1
1463 User Data_7.LONG_2 None SelectOperate Variation 1 Variation 1
1464 User Data_7.LONG_3 None SelectOperate Variation 1 Variation 1
1465 User Data_7.LONG_4 None SelectOperate Variation 1 Variation 1
1466 User Data_7.LONG_5 None SelectOperate Variation 1 Variation 1
1467 User Data_7.LONG_6 None SelectOperate Variation 1 Variation 1
1468 User Data_7.LONG_7 None SelectOperate Variation 1 Variation 1
1469 User Data_7.LONG_8 None SelectOperate Variation 1 Variation 1
1470 User Data_7.LONG_9 None SelectOperate Variation 1 Variation 1
1471 User Data_7.LONG_10 None SelectOperate Variation 1 Variation 1
1472 User Data_7.SHORT_1 None SelectOperate Variation 2 Variation 2
1473 User Data_7.SHORT_2 None SelectOperate Variation 2 Variation 2
1474 User Data_7.SHORT_3 None SelectOperate Variation 2 Variation 2
1475 User Data_7.SHORT_4 None SelectOperate Variation 2 Variation 2
1476 User Data_7.SHORT_5 None SelectOperate Variation 2 Variation 2
1477 User Data_7.SHORT_6 None SelectOperate Variation 2 Variation 2
1478 User Data_7.SHORT_7 None SelectOperate Variation 2 Variation 2
1479 User Data_7.SHORT_8 None SelectOperate Variation 2 Variation 2
1480 User Data_7.SHORT_9 None SelectOperate Variation 2 Variation 2
1481 User Data_7.SHORT_10 None SelectOperate Variation 2 Variation 2
1482 User Data_7.BYTE_1 None SelectOperate Variation 2 Variation 2
1483 User Data_7.BYTE_2 None SelectOperate Variation 2 Variation 2
1484 User Data_7.BYTE_3 None SelectOperate Variation 2 Variation 2
1485 User Data_7.BYTE_4 None SelectOperate Variation 2 Variation 2
1486 User Data_7.BYTE_5 None SelectOperate Variation 2 Variation 2
1487 User Data_7.BYTE_6 None SelectOperate Variation 2 Variation 2
1488 User Data_7.BYTE_7 None SelectOperate Variation 2 Variation 2
DNP3 Data Point List 135
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1489 User Data_7.BYTE_8 None SelectOperate Variation 2 Variation 2
1490 User Data_7.BYTE_9 None SelectOperate Variation 2 Variation 2
1491 User Data_7.BYTE_10 None SelectOperate Variation 2 Variation 2
1492 User Data_8.FLOAT_1 None SelectOperate Variation 3 Variation 3
1493 User Data_8.FLOAT_2 None SelectOperate Variation 3 Variation 3
1494 User Data_8.FLOAT_3 None SelectOperate Variation 3 Variation 3
1495 User Data_8.FLOAT_4 None SelectOperate Variation 3 Variation 3
1496 User Data_8.FLOAT_5 None SelectOperate Variation 3 Variation 3
1497 User Data_8.FLOAT_6 None SelectOperate Variation 3 Variation 3
1498 User Data_8.FLOAT_7 None SelectOperate Variation 3 Variation 3
1499 User Data_8.FLOAT_8 None SelectOperate Variation 3 Variation 3
1500 User Data_8.FLOAT_9 None SelectOperate Variation 3 Variation 3
1501 User Data_8.FLOAT_10 None SelectOperate Variation 3 Variation 3
1502 User Data_8.FLOAT_11 None SelectOperate Variation 3 Variation 3
1503 User Data_8.FLOAT_12 None SelectOperate Variation 3 Variation 3
1504 User Data_8.FLOAT_13 None SelectOperate Variation 3 Variation 3
1505 User Data_8.FLOAT_14 None SelectOperate Variation 3 Variation 3
1506 User Data_8.FLOAT_15 None SelectOperate Variation 3 Variation 3
1507 User Data_8.FLOAT_16 None SelectOperate Variation 3 Variation 3
1508 User Data_8.FLOAT_17 None SelectOperate Variation 3 Variation 3
1509 User Data_8.FLOAT_18 None SelectOperate Variation 3 Variation 3
1510 User Data_8.FLOAT_19 None SelectOperate Variation 3 Variation 3
1511 User Data_8.FLOAT_20 None SelectOperate Variation 3 Variation 3
1512 User Data_8.DOUBLE_1 None SelectOperate Variation 4 Variation 4
1513 User Data_8.DOUBLE_2 None SelectOperate Variation 4 Variation 4
1514 User Data_8.DOUBLE_3 None SelectOperate Variation 4 Variation 4
1515 User Data_8.DOUBLE_4 None SelectOperate Variation 4 Variation 4
1516 User Data_8.DOUBLE_5 None SelectOperate Variation 4 Variation 4
1517 User Data_8.DOUBLE_6 None SelectOperate Variation 4 Variation 4
1518 User Data_8.DOUBLE_7 None SelectOperate Variation 4 Variation 4
1519 User Data_8.DOUBLE_8 None SelectOperate Variation 4 Variation 4
1520 User Data_8.DOUBLE_9 None SelectOperate Variation 4 Variation 4
136 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1521 User Data_8.DOUBLE_10 None SelectOperate Variation 4 Variation 4
1522 User Data_8.LONG_1 None SelectOperate Variation 1 Variation 1
1523 User Data_8.LONG_2 None SelectOperate Variation 1 Variation 1
1524 User Data_8.LONG_3 None SelectOperate Variation 1 Variation 1
1525 User Data_8.LONG_4 None SelectOperate Variation 1 Variation 1
1526 User Data_8.LONG_5 None SelectOperate Variation 1 Variation 1
1527 User Data_8.LONG_6 None SelectOperate Variation 1 Variation 1
1528 User Data_8.LONG_7 None SelectOperate Variation 1 Variation 1
1529 User Data_8.LONG_8 None SelectOperate Variation 1 Variation 1
1530 User Data_8.LONG_9 None SelectOperate Variation 1 Variation 1
1531 User Data_8.LONG_10 None SelectOperate Variation 1 Variation 1
1532 User Data_8.SHORT_1 None SelectOperate Variation 2 Variation 2
1533 User Data_8.SHORT_2 None SelectOperate Variation 2 Variation 2
1534 User Data_8.SHORT_3 None SelectOperate Variation 2 Variation 2
1535 User Data_8.SHORT_4 None SelectOperate Variation 2 Variation 2
1536 User Data_8.SHORT_5 None SelectOperate Variation 2 Variation 2
1537 User Data_8.SHORT_6 None SelectOperate Variation 2 Variation 2
1538 User Data_8.SHORT_7 None SelectOperate Variation 2 Variation 2
1539 User Data_8.SHORT_8 None SelectOperate Variation 2 Variation 2
1540 User Data_8.SHORT_9 None SelectOperate Variation 2 Variation 2
1541 User Data_8.SHORT_10 None SelectOperate Variation 2 Variation 2
1542 User Data_8.BYTE_1 None SelectOperate Variation 2 Variation 2
1543 User Data_8.BYTE_2 None SelectOperate Variation 2 Variation 2
1544 User Data_8.BYTE_3 None SelectOperate Variation 2 Variation 2
1545 User Data_8.BYTE_4 None SelectOperate Variation 2 Variation 2
1546 User Data_8.BYTE_5 None SelectOperate Variation 2 Variation 2
1547 User Data_8.BYTE_6 None SelectOperate Variation 2 Variation 2
1548 User Data_8.BYTE_7 None SelectOperate Variation 2 Variation 2
1549 User Data_8.BYTE_8 None SelectOperate Variation 2 Variation 2
1550 User Data_8.BYTE_9 None SelectOperate Variation 2 Variation 2
1551 User Data_8.BYTE_10 None SelectOperate Variation 2 Variation 2
1552 User Data_9.FLOAT_1 None SelectOperate Variation 3 Variation 3
DNP3 Data Point List 137
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1553 User Data_9.FLOAT_2 None SelectOperate Variation 3 Variation 3
1554 User Data_9.FLOAT_3 None SelectOperate Variation 3 Variation 3
1555 User Data_9.FLOAT_4 None SelectOperate Variation 3 Variation 3
1556 User Data_9.FLOAT_5 None SelectOperate Variation 3 Variation 3
1557 User Data_9.FLOAT_6 None SelectOperate Variation 3 Variation 3
1558 User Data_9.FLOAT_7 None SelectOperate Variation 3 Variation 3
1559 User Data_9.FLOAT_8 None SelectOperate Variation 3 Variation 3
1560 User Data_9.FLOAT_9 None SelectOperate Variation 3 Variation 3
1561 User Data_9.FLOAT_10 None SelectOperate Variation 3 Variation 3
1562 User Data_9.FLOAT_11 None SelectOperate Variation 3 Variation 3
1563 User Data_9.FLOAT_12 None SelectOperate Variation 3 Variation 3
1564 User Data_9.FLOAT_13 None SelectOperate Variation 3 Variation 3
1565 User Data_9.FLOAT_14 None SelectOperate Variation 3 Variation 3
1566 User Data_9.FLOAT_15 None SelectOperate Variation 3 Variation 3
1567 User Data_9.FLOAT_16 None SelectOperate Variation 3 Variation 3
1568 User Data_9.FLOAT_17 None SelectOperate Variation 3 Variation 3
1569 User Data_9.FLOAT_18 None SelectOperate Variation 3 Variation 3
1570 User Data_9.FLOAT_19 None SelectOperate Variation 3 Variation 3
1571 User Data_9.FLOAT_20 None SelectOperate Variation 3 Variation 3
1572 User Data_9.DOUBLE_1 None SelectOperate Variation 4 Variation 4
1573 User Data_9.DOUBLE_2 None SelectOperate Variation 4 Variation 4
1574 User Data_9.DOUBLE_3 None SelectOperate Variation 4 Variation 4
1575 User Data_9.DOUBLE_4 None SelectOperate Variation 4 Variation 4
1576 User Data_9.DOUBLE_5 None SelectOperate Variation 4 Variation 4
1577 User Data_9.DOUBLE_6 None SelectOperate Variation 4 Variation 4
1578 User Data_9.DOUBLE_7 None SelectOperate Variation 4 Variation 4
1579 User Data_9.DOUBLE_8 None SelectOperate Variation 4 Variation 4
1580 User Data_9.DOUBLE_9 None SelectOperate Variation 4 Variation 4
1581 User Data_9.DOUBLE_10 None SelectOperate Variation 4 Variation 4
1582 User Data_9.LONG_1 None SelectOperate Variation 1 Variation 1
1583 User Data_9.LONG_2 None SelectOperate Variation 1 Variation 1
1584 User Data_9.LONG_3 None SelectOperate Variation 1 Variation 1
138 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1585 User Data_9.LONG_4 None SelectOperate Variation 1 Variation 1
1586 User Data_9.LONG_5 None SelectOperate Variation 1 Variation 1
1587 User Data_9.LONG_6 None SelectOperate Variation 1 Variation 1
1588 User Data_9.LONG_7 None SelectOperate Variation 1 Variation 1
1589 User Data_9.LONG_8 None SelectOperate Variation 1 Variation 1
1590 User Data_9.LONG_9 None SelectOperate Variation 1 Variation 1
1591 User Data_9.LONG_10 None SelectOperate Variation 1 Variation 1
1592 User Data_9.SHORT_1 None SelectOperate Variation 2 Variation 2
1593 User Data_9.SHORT_2 None SelectOperate Variation 2 Variation 2
1594 User Data_9.SHORT_3 None SelectOperate Variation 2 Variation 2
1595 User Data_9.SHORT_4 None SelectOperate Variation 2 Variation 2
1596 User Data_9.SHORT_5 None SelectOperate Variation 2 Variation 2
1597 User Data_9.SHORT_6 None SelectOperate Variation 2 Variation 2
1598 User Data_9.SHORT_7 None SelectOperate Variation 2 Variation 2
1599 User Data_9.SHORT_8 None SelectOperate Variation 2 Variation 2
1600 User Data_9.SHORT_9 None SelectOperate Variation 2 Variation 2
1601 User Data_9.SHORT_10 None SelectOperate Variation 2 Variation 2
1602 User Data_9.BYTE_1 None SelectOperate Variation 2 Variation 2
1603 User Data_9.BYTE_2 None SelectOperate Variation 2 Variation 2
1604 User Data_9.BYTE_3 None SelectOperate Variation 2 Variation 2
1605 User Data_9.BYTE_4 None SelectOperate Variation 2 Variation 2
1606 User Data_9.BYTE_5 None SelectOperate Variation 2 Variation 2
1607 User Data_9.BYTE_6 None SelectOperate Variation 2 Variation 2
1608 User Data_9.BYTE_7 None SelectOperate Variation 2 Variation 2
1609 User Data_9.BYTE_8 None SelectOperate Variation 2 Variation 2
1610 User Data_9.BYTE_9 None SelectOperate Variation 2 Variation 2
1611 User Data_9.BYTE_10 None SelectOperate Variation 2 Variation 2
1612 User Data_10.FLOAT_1 None SelectOperate Variation 3 Variation 3
1613 User Data_10.FLOAT_2 None SelectOperate Variation 3 Variation 3
1614 User Data_10.FLOAT_3 None SelectOperate Variation 3 Variation 3
1615 User Data_10.FLOAT_4 None SelectOperate Variation 3 Variation 3
1616 User Data_10.FLOAT_5 None SelectOperate Variation 3 Variation 3
DNP3 Data Point List 139
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1617 User Data_10.FLOAT_6 None SelectOperate Variation 3 Variation 3
1618 User Data_10.FLOAT_7 None SelectOperate Variation 3 Variation 3
1619 User Data_10.FLOAT_8 None SelectOperate Variation 3 Variation 3
1620 User Data_10.FLOAT_9 None SelectOperate Variation 3 Variation 3
1621 User Data_10.FLOAT_10 None SelectOperate Variation 3 Variation 3
1622 User Data_10.FLOAT_11 None SelectOperate Variation 3 Variation 3
1623 User Data_10.FLOAT_12 None SelectOperate Variation 3 Variation 3
1624 User Data_10.FLOAT_13 None SelectOperate Variation 3 Variation 3
1625 User Data_10.FLOAT_14 None SelectOperate Variation 3 Variation 3
1626 User Data_10.FLOAT_15 None SelectOperate Variation 3 Variation 3
1627 User Data_10.FLOAT_16 None SelectOperate Variation 3 Variation 3
1628 User Data_10.FLOAT_17 None SelectOperate Variation 3 Variation 3
1629 User Data_10.FLOAT_18 None SelectOperate Variation 3 Variation 3
1630 User Data_10.FLOAT_19 None SelectOperate Variation 3 Variation 3
1631 User Data_10.FLOAT_20 None SelectOperate Variation 3 Variation 3
1632 User Data_10.DOUBLE_1 None SelectOperate Variation 4 Variation 4
1633 User Data_10.DOUBLE_2 None SelectOperate Variation 4 Variation 4
1634 User Data_10.DOUBLE_3 None SelectOperate Variation 4 Variation 4
1635 User Data_10.DOUBLE_4 None SelectOperate Variation 4 Variation 4
1636 User Data_10.DOUBLE_5 None SelectOperate Variation 4 Variation 4
1637 User Data_10.DOUBLE_6 None SelectOperate Variation 4 Variation 4
1638 User Data_10.DOUBLE_7 None SelectOperate Variation 4 Variation 4
1639 User Data_10.DOUBLE_8 None SelectOperate Variation 4 Variation 4
1640 User Data_10.DOUBLE_9 None SelectOperate Variation 4 Variation 4
1641 User Data_10.DOUBLE_10 None SelectOperate Variation 4 Variation 4
1642 User Data_10.LONG_1 None SelectOperate Variation 1 Variation 1
1643 User Data_10.LONG_2 None SelectOperate Variation 1 Variation 1
1644 User Data_10.LONG_3 None SelectOperate Variation 1 Variation 1
1645 User Data_10.LONG_4 None SelectOperate Variation 1 Variation 1
1646 User Data_10.LONG_5 None SelectOperate Variation 1 Variation 1
1647 User Data_10.LONG_6 None SelectOperate Variation 1 Variation 1
1648 User Data_10.LONG_7 None SelectOperate Variation 1 Variation 1
140 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1649 User Data_10.LONG_8 None SelectOperate Variation 1 Variation 1
1650 User Data_10.LONG_9 None SelectOperate Variation 1 Variation 1
1651 User Data_10.LONG_10 None SelectOperate Variation 1 Variation 1
1652 User Data_10.SHORT_1 None SelectOperate Variation 2 Variation 2
1653 User Data_10.SHORT_2 None SelectOperate Variation 2 Variation 2
1654 User Data_10.SHORT_3 None SelectOperate Variation 2 Variation 2
1655 User Data_10.SHORT_4 None SelectOperate Variation 2 Variation 2
1656 User Data_10.SHORT_5 None SelectOperate Variation 2 Variation 2
1657 User Data_10.SHORT_6 None SelectOperate Variation 2 Variation 2
1658 User Data_10.SHORT_7 None SelectOperate Variation 2 Variation 2
1659 User Data_10.SHORT_8 None SelectOperate Variation 2 Variation 2
1660 User Data_10.SHORT_9 None SelectOperate Variation 2 Variation 2
1661 User Data_10.SHORT_10 None SelectOperate Variation 2 Variation 2
1662 User Data_10.BYTE_1 None SelectOperate Variation 2 Variation 2
1663 User Data_10.BYTE_2 None SelectOperate Variation 2 Variation 2
1664 User Data_10.BYTE_3 None SelectOperate Variation 2 Variation 2
1665 User Data_10.BYTE_4 None SelectOperate Variation 2 Variation 2
1666 User Data_10.BYTE_5 None SelectOperate Variation 2 Variation 2
1667 User Data_10.BYTE_6 None SelectOperate Variation 2 Variation 2
1668 User Data_10.BYTE_7 None SelectOperate Variation 2 Variation 2
1669 User Data_10.BYTE_8 None SelectOperate Variation 2 Variation 2
1670 User Data_10.BYTE_9 None SelectOperate Variation 2 Variation 2
1671 User Data_10.BYTE_10 None SelectOperate Variation 2 Variation 2
1672 User Data_11.FLOAT_1 None SelectOperate Variation 3 Variation 3
1673 User Data_11.FLOAT_2 None SelectOperate Variation 3 Variation 3
1674 User Data_11.FLOAT_3 None SelectOperate Variation 3 Variation 3
1675 User Data_11.FLOAT_4 None SelectOperate Variation 3 Variation 3
1676 User Data_11.FLOAT_5 None SelectOperate Variation 3 Variation 3
1677 User Data_11.FLOAT_6 None SelectOperate Variation 3 Variation 3
1678 User Data_11.FLOAT_7 None SelectOperate Variation 3 Variation 3
1679 User Data_11.FLOAT_8 None SelectOperate Variation 3 Variation 3
1680 User Data_11.FLOAT_9 None SelectOperate Variation 3 Variation 3
DNP3 Data Point List 141
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1681 User Data_11.FLOAT_10 None SelectOperate Variation 3 Variation 3
1682 User Data_11.FLOAT_11 None SelectOperate Variation 3 Variation 3
1683 User Data_11.FLOAT_12 None SelectOperate Variation 3 Variation 3
1684 User Data_11.FLOAT_13 None SelectOperate Variation 3 Variation 3
1685 User Data_11.FLOAT_14 None SelectOperate Variation 3 Variation 3
1686 User Data_11.FLOAT_15 None SelectOperate Variation 3 Variation 3
1687 User Data_11.FLOAT_16 None SelectOperate Variation 3 Variation 3
1688 User Data_11.FLOAT_17 None SelectOperate Variation 3 Variation 3
1689 User Data_11.FLOAT_18 None SelectOperate Variation 3 Variation 3
1690 User Data_11.FLOAT_19 None SelectOperate Variation 3 Variation 3
1691 User Data_11.FLOAT_20 None SelectOperate Variation 3 Variation 3
1692 User Data_11.DOUBLE_1 None SelectOperate Variation 4 Variation 4
1693 User Data_11.DOUBLE_2 None SelectOperate Variation 4 Variation 4
1694 User Data_11.DOUBLE_3 None SelectOperate Variation 4 Variation 4
1695 User Data_11.DOUBLE_4 None SelectOperate Variation 4 Variation 4
1696 User Data_11.DOUBLE_5 None SelectOperate Variation 4 Variation 4
1697 User Data_11.DOUBLE_6 None SelectOperate Variation 4 Variation 4
1698 User Data_11.DOUBLE_7 None SelectOperate Variation 4 Variation 4
1699 User Data_11.DOUBLE_8 None SelectOperate Variation 4 Variation 4
1700 User Data_11.DOUBLE_9 None SelectOperate Variation 4 Variation 4
1701 User Data_11.DOUBLE_10 None SelectOperate Variation 4 Variation 4
1702 User Data_11.LONG_1 None SelectOperate Variation 1 Variation 1
1703 User Data_11.LONG_2 None SelectOperate Variation 1 Variation 1
1704 User Data_11.LONG_3 None SelectOperate Variation 1 Variation 1
1705 User Data_11.LONG_4 None SelectOperate Variation 1 Variation 1
1706 User Data_11.LONG_5 None SelectOperate Variation 1 Variation 1
1707 User Data_11.LONG_6 None SelectOperate Variation 1 Variation 1
1708 User Data_11.LONG_7 None SelectOperate Variation 1 Variation 1
1709 User Data_11.LONG_8 None SelectOperate Variation 1 Variation 1
1710 User Data_11.LONG_9 None SelectOperate Variation 1 Variation 1
1711 User Data_11.LONG_10 None SelectOperate Variation 1 Variation 1
1712 User Data_11.SHORT_1 None SelectOperate Variation 2 Variation 2
142 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1713 User Data_11.SHORT_2 None SelectOperate Variation 2 Variation 2
1714 User Data_11.SHORT_3 None SelectOperate Variation 2 Variation 2
1715 User Data_11.SHORT_4 None SelectOperate Variation 2 Variation 2
1716 User Data_11.SHORT_5 None SelectOperate Variation 2 Variation 2
1717 User Data_11.SHORT_6 None SelectOperate Variation 2 Variation 2
1718 User Data_11.SHORT_7 None SelectOperate Variation 2 Variation 2
1719 User Data_11.SHORT_8 None SelectOperate Variation 2 Variation 2
1720 User Data_11.SHORT_9 None SelectOperate Variation 2 Variation 2
1721 User Data_11.SHORT_10 None SelectOperate Variation 2 Variation 2
1722 User Data_11.BYTE_1 None SelectOperate Variation 2 Variation 2
1723 User Data_11.BYTE_2 None SelectOperate Variation 2 Variation 2
1724 User Data_11.BYTE_3 None SelectOperate Variation 2 Variation 2
1725 User Data_11.BYTE_4 None SelectOperate Variation 2 Variation 2
1726 User Data_11.BYTE_5 None SelectOperate Variation 2 Variation 2
1727 User Data_11.BYTE_6 None SelectOperate Variation 2 Variation 2
1728 User Data_11.BYTE_7 None SelectOperate Variation 2 Variation 2
1729 User Data_11.BYTE_8 None SelectOperate Variation 2 Variation 2
1730 User Data_11.BYTE_9 None SelectOperate Variation 2 Variation 2
1731 User Data_11.BYTE_10 None SelectOperate Variation 2 Variation 2
1732 User Data_12.FLOAT_1 None SelectOperate Variation 3 Variation 3
1733 User Data_12.FLOAT_2 None SelectOperate Variation 3 Variation 3
1734 User Data_12.FLOAT_3 None SelectOperate Variation 3 Variation 3
1735 User Data_12.FLOAT_4 None SelectOperate Variation 3 Variation 3
1736 User Data_12.FLOAT_5 None SelectOperate Variation 3 Variation 3
1737 User Data_12.FLOAT_6 None SelectOperate Variation 3 Variation 3
1738 User Data_12.FLOAT_7 None SelectOperate Variation 3 Variation 3
1739 User Data_12.FLOAT_8 None SelectOperate Variation 3 Variation 3
1740 User Data_12.FLOAT_9 None SelectOperate Variation 3 Variation 3
1741 User Data_12.FLOAT_10 None SelectOperate Variation 3 Variation 3
1742 User Data_12.FLOAT_11 None SelectOperate Variation 3 Variation 3
1743 User Data_12.FLOAT_12 None SelectOperate Variation 3 Variation 3
1744 User Data_12.FLOAT_13 None SelectOperate Variation 3 Variation 3
DNP3 Data Point List 143
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1745 User Data_12.FLOAT_14 None SelectOperate Variation 3 Variation 3
1746 User Data_12.FLOAT_15 None SelectOperate Variation 3 Variation 3
1747 User Data_12.FLOAT_16 None SelectOperate Variation 3 Variation 3
1748 User Data_12.FLOAT_17 None SelectOperate Variation 3 Variation 3
1749 User Data_12.FLOAT_18 None SelectOperate Variation 3 Variation 3
1750 User Data_12.FLOAT_19 None SelectOperate Variation 3 Variation 3
1751 User Data_12.FLOAT_20 None SelectOperate Variation 3 Variation 3
1752 User Data_12.DOUBLE_1 None SelectOperate Variation 4 Variation 4
1753 User Data_12.DOUBLE_2 None SelectOperate Variation 4 Variation 4
1754 User Data_12.DOUBLE_3 None SelectOperate Variation 4 Variation 4
1755 User Data_12.DOUBLE_4 None SelectOperate Variation 4 Variation 4
1756 User Data_12.DOUBLE_5 None SelectOperate Variation 4 Variation 4
1757 User Data_12.DOUBLE_6 None SelectOperate Variation 4 Variation 4
1758 User Data_12.DOUBLE_7 None SelectOperate Variation 4 Variation 4
1759 User Data_12.DOUBLE_8 None SelectOperate Variation 4 Variation 4
1760 User Data_12.DOUBLE_9 None SelectOperate Variation 4 Variation 4
1761 User Data_12.DOUBLE_10 None SelectOperate Variation 4 Variation 4
1762 User Data_12.LONG_1 None SelectOperate Variation 1 Variation 1
1763 User Data_12.LONG_2 None SelectOperate Variation 1 Variation 1
1764 User Data_12.LONG_3 None SelectOperate Variation 1 Variation 1
1765 User Data_12.LONG_4 None SelectOperate Variation 1 Variation 1
1766 User Data_12.LONG_5 None SelectOperate Variation 1 Variation 1
1767 User Data_12.LONG_6 None SelectOperate Variation 1 Variation 1
1768 User Data_12.LONG_7 None SelectOperate Variation 1 Variation 1
1769 User Data_12.LONG_8 None SelectOperate Variation 1 Variation 1
1770 User Data_12.LONG_9 None SelectOperate Variation 1 Variation 1
1771 User Data_12.LONG_10 None SelectOperate Variation 1 Variation 1
1772 User Data_12.SHORT_1 None SelectOperate Variation 2 Variation 2
1773 User Data_12.SHORT_2 None SelectOperate Variation 2 Variation 2
1774 User Data_12.SHORT_3 None SelectOperate Variation 2 Variation 2
1775 User Data_12.SHORT_4 None SelectOperate Variation 2 Variation 2
1776 User Data_12.SHORT_5 None SelectOperate Variation 2 Variation 2
144 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1777 User Data_12.SHORT_6 None SelectOperate Variation 2 Variation 2
1778 User Data_12.SHORT_7 None SelectOperate Variation 2 Variation 2
1779 User Data_12.SHORT_8 None SelectOperate Variation 2 Variation 2
1780 User Data_12.SHORT_9 None SelectOperate Variation 2 Variation 2
1781 User Data_12.SHORT_10 None SelectOperate Variation 2 Variation 2
1782 User Data_12.BYTE_1 None SelectOperate Variation 2 Variation 2
1783 User Data_12.BYTE_2 None SelectOperate Variation 2 Variation 2
1784 User Data_12.BYTE_3 None SelectOperate Variation 2 Variation 2
1785 User Data_12.BYTE_4 None SelectOperate Variation 2 Variation 2
1786 User Data_12.BYTE_5 None SelectOperate Variation 2 Variation 2
1787 User Data_12.BYTE_6 None SelectOperate Variation 2 Variation 2
1788 User Data_12.BYTE_7 None SelectOperate Variation 2 Variation 2
1789 User Data_12.BYTE_8 None SelectOperate Variation 2 Variation 2
1790 User Data_12.BYTE_9 None SelectOperate Variation 2 Variation 2
1791 User Data_12.BYTE_10 None SelectOperate Variation 2 Variation 2
1792 User Data_13.FLOAT_1 None SelectOperate Variation 3 Variation 3
1793 User Data_13.FLOAT_2 None SelectOperate Variation 3 Variation 3
1794 User Data_13.FLOAT_3 None SelectOperate Variation 3 Variation 3
1795 User Data_13.FLOAT_4 None SelectOperate Variation 3 Variation 3
1796 User Data_13.FLOAT_5 None SelectOperate Variation 3 Variation 3
1797 User Data_13.FLOAT_6 None SelectOperate Variation 3 Variation 3
1798 User Data_13.FLOAT_7 None SelectOperate Variation 3 Variation 3
1799 User Data_13.FLOAT_8 None SelectOperate Variation 3 Variation 3
1800 User Data_13.FLOAT_9 None SelectOperate Variation 3 Variation 3
1801 User Data_13.FLOAT_10 None SelectOperate Variation 3 Variation 3
1802 User Data_13.FLOAT_11 None SelectOperate Variation 3 Variation 3
1803 User Data_13.FLOAT_12 None SelectOperate Variation 3 Variation 3
1804 User Data_13.FLOAT_13 None SelectOperate Variation 3 Variation 3
1805 User Data_13.FLOAT_14 None SelectOperate Variation 3 Variation 3
1806 User Data_13.FLOAT_15 None SelectOperate Variation 3 Variation 3
1807 User Data_13.FLOAT_16 None SelectOperate Variation 3 Variation 3
1808 User Data_13.FLOAT_17 None SelectOperate Variation 3 Variation 3
DNP3 Data Point List 145
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1809 User Data_13.FLOAT_18 None SelectOperate Variation 3 Variation 3
1810 User Data_13.FLOAT_19 None SelectOperate Variation 3 Variation 3
1811 User Data_13.FLOAT_20 None SelectOperate Variation 3 Variation 3
1812 User Data_13.DOUBLE_1 None SelectOperate Variation 4 Variation 4
1813 User Data_13.DOUBLE_2 None SelectOperate Variation 4 Variation 4
1814 User Data_13.DOUBLE_3 None SelectOperate Variation 4 Variation 4
1815 User Data_13.DOUBLE_4 None SelectOperate Variation 4 Variation 4
1816 User Data_13.DOUBLE_5 None SelectOperate Variation 4 Variation 4
1817 User Data_13.DOUBLE_6 None SelectOperate Variation 4 Variation 4
1818 User Data_13.DOUBLE_7 None SelectOperate Variation 4 Variation 4
1819 User Data_13.DOUBLE_8 None SelectOperate Variation 4 Variation 4
1820 User Data_13.DOUBLE_9 None SelectOperate Variation 4 Variation 4
1821 User Data_13.DOUBLE_10 None SelectOperate Variation 4 Variation 4
1822 User Data_13.LONG_1 None SelectOperate Variation 1 Variation 1
1823 User Data_13.LONG_2 None SelectOperate Variation 1 Variation 1
1824 User Data_13.LONG_3 None SelectOperate Variation 1 Variation 1
1825 User Data_13.LONG_4 None SelectOperate Variation 1 Variation 1
1826 User Data_13.LONG_5 None SelectOperate Variation 1 Variation 1
1827 User Data_13.LONG_6 None SelectOperate Variation 1 Variation 1
1828 User Data_13.LONG_7 None SelectOperate Variation 1 Variation 1
1829 User Data_13.LONG_8 None SelectOperate Variation 1 Variation 1
1830 User Data_13.LONG_9 None SelectOperate Variation 1 Variation 1
1831 User Data_13.LONG_10 None SelectOperate Variation 1 Variation 1
1832 User Data_13.SHORT_1 None SelectOperate Variation 2 Variation 2
1833 User Data_13.SHORT_2 None SelectOperate Variation 2 Variation 2
1834 User Data_13.SHORT_3 None SelectOperate Variation 2 Variation 2
1835 User Data_13.SHORT_4 None SelectOperate Variation 2 Variation 2
1836 User Data_13.SHORT_5 None SelectOperate Variation 2 Variation 2
1837 User Data_13.SHORT_6 None SelectOperate Variation 2 Variation 2
1838 User Data_13.SHORT_7 None SelectOperate Variation 2 Variation 2
1839 User Data_13.SHORT_8 None SelectOperate Variation 2 Variation 2
1840 User Data_13.SHORT_9 None SelectOperate Variation 2 Variation 2
146 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1841 User Data_13.SHORT_10 None SelectOperate Variation 2 Variation 2
1842 User Data_13.BYTE_1 None SelectOperate Variation 2 Variation 2
1843 User Data_13.BYTE_2 None SelectOperate Variation 2 Variation 2
1844 User Data_13.BYTE_3 None SelectOperate Variation 2 Variation 2
1845 User Data_13.BYTE_4 None SelectOperate Variation 2 Variation 2
1846 User Data_13.BYTE_5 None SelectOperate Variation 2 Variation 2
1847 User Data_13.BYTE_6 None SelectOperate Variation 2 Variation 2
1848 User Data_13.BYTE_7 None SelectOperate Variation 2 Variation 2
1849 User Data_13.BYTE_8 None SelectOperate Variation 2 Variation 2
1850 User Data_13.BYTE_9 None SelectOperate Variation 2 Variation 2
1851 User Data_13.BYTE_10 None SelectOperate Variation 2 Variation 2
1852 User Data_14.FLOAT_1 None SelectOperate Variation 3 Variation 3
1853 User Data_14.FLOAT_2 None SelectOperate Variation 3 Variation 3
1854 User Data_14.FLOAT_3 None SelectOperate Variation 3 Variation 3
1855 User Data_14.FLOAT_4 None SelectOperate Variation 3 Variation 3
1856 User Data_14.FLOAT_5 None SelectOperate Variation 3 Variation 3
1857 User Data_14.FLOAT_6 None SelectOperate Variation 3 Variation 3
1858 User Data_14.FLOAT_7 None SelectOperate Variation 3 Variation 3
1859 User Data_14.FLOAT_8 None SelectOperate Variation 3 Variation 3
1860 User Data_14.FLOAT_9 None SelectOperate Variation 3 Variation 3
1861 User Data_14.FLOAT_10 None SelectOperate Variation 3 Variation 3
1862 User Data_14.FLOAT_11 None SelectOperate Variation 3 Variation 3
1863 User Data_14.FLOAT_12 None SelectOperate Variation 3 Variation 3
1864 User Data_14.FLOAT_13 None SelectOperate Variation 3 Variation 3
1865 User Data_14.FLOAT_14 None SelectOperate Variation 3 Variation 3
1866 User Data_14.FLOAT_15 None SelectOperate Variation 3 Variation 3
1867 User Data_14.FLOAT_16 None SelectOperate Variation 3 Variation 3
1868 User Data_14.FLOAT_17 None SelectOperate Variation 3 Variation 3
1869 User Data_14.FLOAT_18 None SelectOperate Variation 3 Variation 3
1870 User Data_14.FLOAT_19 None SelectOperate Variation 3 Variation 3
1871 User Data_14.FLOAT_20 None SelectOperate Variation 3 Variation 3
1872 User Data_14.DOUBLE_1 None SelectOperate Variation 4 Variation 4
DNP3 Data Point List 147
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1873 User Data_14.DOUBLE_2 None SelectOperate Variation 4 Variation 4
1874 User Data_14.DOUBLE_3 None SelectOperate Variation 4 Variation 4
1875 User Data_14.DOUBLE_4 None SelectOperate Variation 4 Variation 4
1876 User Data_14.DOUBLE_5 None SelectOperate Variation 4 Variation 4
1877 User Data_14.DOUBLE_6 None SelectOperate Variation 4 Variation 4
1878 User Data_14.DOUBLE_7 None SelectOperate Variation 4 Variation 4
1879 User Data_14.DOUBLE_8 None SelectOperate Variation 4 Variation 4
1880 User Data_14.DOUBLE_9 None SelectOperate Variation 4 Variation 4
1881 User Data_14.DOUBLE_10 None SelectOperate Variation 4 Variation 4
1882 User Data_14.LONG_1 None SelectOperate Variation 1 Variation 1
1883 User Data_14.LONG_2 None SelectOperate Variation 1 Variation 1
1884 User Data_14.LONG_3 None SelectOperate Variation 1 Variation 1
1885 User Data_14.LONG_4 None SelectOperate Variation 1 Variation 1
1886 User Data_14.LONG_5 None SelectOperate Variation 1 Variation 1
1887 User Data_14.LONG_6 None SelectOperate Variation 1 Variation 1
1888 User Data_14.LONG_7 None SelectOperate Variation 1 Variation 1
1889 User Data_14.LONG_8 None SelectOperate Variation 1 Variation 1
1890 User Data_14.LONG_9 None SelectOperate Variation 1 Variation 1
1891 User Data_14.LONG_10 None SelectOperate Variation 1 Variation 1
1892 User Data_14.SHORT_1 None SelectOperate Variation 2 Variation 2
1893 User Data_14.SHORT_2 None SelectOperate Variation 2 Variation 2
1894 User Data_14.SHORT_3 None SelectOperate Variation 2 Variation 2
1895 User Data_14.SHORT_4 None SelectOperate Variation 2 Variation 2
1896 User Data_14.SHORT_5 None SelectOperate Variation 2 Variation 2
1897 User Data_14.SHORT_6 None SelectOperate Variation 2 Variation 2
1898 User Data_14.SHORT_7 None SelectOperate Variation 2 Variation 2
1899 User Data_14.SHORT_8 None SelectOperate Variation 2 Variation 2
1900 User Data_14.SHORT_9 None SelectOperate Variation 2 Variation 2
1901 User Data_14.SHORT_10 None SelectOperate Variation 2 Variation 2
1902 User Data_14.BYTE_1 None SelectOperate Variation 2 Variation 2
1903 User Data_14.BYTE_2 None SelectOperate Variation 2 Variation 2
1904 User Data_14.BYTE_3 None SelectOperate Variation 2 Variation 2
148 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1905 User Data_14.BYTE_4 None SelectOperate Variation 2 Variation 2
1906 User Data_14.BYTE_5 None SelectOperate Variation 2 Variation 2
1907 User Data_14.BYTE_6 None SelectOperate Variation 2 Variation 2
1908 User Data_14.BYTE_7 None SelectOperate Variation 2 Variation 2
1909 User Data_14.BYTE_8 None SelectOperate Variation 2 Variation 2
1910 User Data_14.BYTE_9 None SelectOperate Variation 2 Variation 2
1911 User Data_14.BYTE_10 None SelectOperate Variation 2 Variation 2
1912 User Data_15.FLOAT_1 None SelectOperate Variation 3 Variation 3
1913 User Data_15.FLOAT_2 None SelectOperate Variation 3 Variation 3
1914 User Data_15.FLOAT_3 None SelectOperate Variation 3 Variation 3
1915 User Data_15.FLOAT_4 None SelectOperate Variation 3 Variation 3
1916 User Data_15.FLOAT_5 None SelectOperate Variation 3 Variation 3
1917 User Data_15.FLOAT_6 None SelectOperate Variation 3 Variation 3
1918 User Data_15.FLOAT_7 None SelectOperate Variation 3 Variation 3
1919 User Data_15.FLOAT_8 None SelectOperate Variation 3 Variation 3
1920 User Data_15.FLOAT_9 None SelectOperate Variation 3 Variation 3
1921 User Data_15.FLOAT_10 None SelectOperate Variation 3 Variation 3
1922 User Data_15.FLOAT_11 None SelectOperate Variation 3 Variation 3
1923 User Data_15.FLOAT_12 None SelectOperate Variation 3 Variation 3
1924 User Data_15.FLOAT_13 None SelectOperate Variation 3 Variation 3
1925 User Data_15.FLOAT_14 None SelectOperate Variation 3 Variation 3
1926 User Data_15.FLOAT_15 None SelectOperate Variation 3 Variation 3
1927 User Data_15.FLOAT_16 None SelectOperate Variation 3 Variation 3
1928 User Data_15.FLOAT_17 None SelectOperate Variation 3 Variation 3
1929 User Data_15.FLOAT_18 None SelectOperate Variation 3 Variation 3
1930 User Data_15.FLOAT_19 None SelectOperate Variation 3 Variation 3
1931 User Data_15.FLOAT_20 None SelectOperate Variation 3 Variation 3
1932 User Data_15.DOUBLE_1 None SelectOperate Variation 4 Variation 4
1933 User Data_15.DOUBLE_2 None SelectOperate Variation 4 Variation 4
1934 User Data_15.DOUBLE_3 None SelectOperate Variation 4 Variation 4
1935 User Data_15.DOUBLE_4 None SelectOperate Variation 4 Variation 4
1936 User Data_15.DOUBLE_5 None SelectOperate Variation 4 Variation 4
DNP3 Data Point List 149
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1937 User Data_15.DOUBLE_6 None SelectOperate Variation 4 Variation 4
1938 User Data_15.DOUBLE_7 None SelectOperate Variation 4 Variation 4
1939 User Data_15.DOUBLE_8 None SelectOperate Variation 4 Variation 4
1940 User Data_15.DOUBLE_9 None SelectOperate Variation 4 Variation 4
1941 User Data_15.DOUBLE_10 None SelectOperate Variation 4 Variation 4
1942 User Data_15.LONG_1 None SelectOperate Variation 1 Variation 1
1943 User Data_15.LONG_2 None SelectOperate Variation 1 Variation 1
1944 User Data_15.LONG_3 None SelectOperate Variation 1 Variation 1
1945 User Data_15.LONG_4 None SelectOperate Variation 1 Variation 1
1946 User Data_15.LONG_5 None SelectOperate Variation 1 Variation 1
1947 User Data_15.LONG_6 None SelectOperate Variation 1 Variation 1
1948 User Data_15.LONG_7 None SelectOperate Variation 1 Variation 1
1949 User Data_15.LONG_8 None SelectOperate Variation 1 Variation 1
1950 User Data_15.LONG_9 None SelectOperate Variation 1 Variation 1
1951 User Data_15.LONG_10 None SelectOperate Variation 1 Variation 1
1952 User Data_15.SHORT_1 None SelectOperate Variation 2 Variation 2
1953 User Data_15.SHORT_2 None SelectOperate Variation 2 Variation 2
1954 User Data_15.SHORT_3 None SelectOperate Variation 2 Variation 2
1955 User Data_15.SHORT_4 None SelectOperate Variation 2 Variation 2
1956 User Data_15.SHORT_5 None SelectOperate Variation 2 Variation 2
1957 User Data_15.SHORT_6 None SelectOperate Variation 2 Variation 2
1958 User Data_15.SHORT_7 None SelectOperate Variation 2 Variation 2
1959 User Data_15.SHORT_8 None SelectOperate Variation 2 Variation 2
1960 User Data_15.SHORT_9 None SelectOperate Variation 2 Variation 2
1961 User Data_15.SHORT_10 None SelectOperate Variation 2 Variation 2
1962 User Data_15.BYTE_1 None SelectOperate Variation 2 Variation 2
1963 User Data_15.BYTE_2 None SelectOperate Variation 2 Variation 2
1964 User Data_15.BYTE_3 None SelectOperate Variation 2 Variation 2
1965 User Data_15.BYTE_4 None SelectOperate Variation 2 Variation 2
1966 User Data_15.BYTE_5 None SelectOperate Variation 2 Variation 2
1967 User Data_15.BYTE_6 None SelectOperate Variation 2 Variation 2
1968 User Data_15.BYTE_7 None SelectOperate Variation 2 Variation 2
150 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
1969 User Data_15.BYTE_8 None SelectOperate Variation 2 Variation 2
1970 User Data_15.BYTE_9 None SelectOperate Variation 2 Variation 2
1971 User Data_15.BYTE_10 None SelectOperate Variation 2 Variation 2
1972 User Data_16.FLOAT_1 None SelectOperate Variation 3 Variation 3
1973 User Data_16.FLOAT_2 None SelectOperate Variation 3 Variation 3
1974 User Data_16.FLOAT_3 None SelectOperate Variation 3 Variation 3
1975 User Data_16.FLOAT_4 None SelectOperate Variation 3 Variation 3
1976 User Data_16.FLOAT_5 None SelectOperate Variation 3 Variation 3
1977 User Data_16.FLOAT_6 None SelectOperate Variation 3 Variation 3
1978 User Data_16.FLOAT_7 None SelectOperate Variation 3 Variation 3
1979 User Data_16.FLOAT_8 None SelectOperate Variation 3 Variation 3
1980 User Data_16.FLOAT_9 None SelectOperate Variation 3 Variation 3
1981 User Data_16.FLOAT_10 None SelectOperate Variation 3 Variation 3
1982 User Data_16.FLOAT_11 None SelectOperate Variation 3 Variation 3
1983 User Data_16.FLOAT_12 None SelectOperate Variation 3 Variation 3
1984 User Data_16.FLOAT_13 None SelectOperate Variation 3 Variation 3
1985 User Data_16.FLOAT_14 None SelectOperate Variation 3 Variation 3
1986 User Data_16.FLOAT_15 None SelectOperate Variation 3 Variation 3
1987 User Data_16.FLOAT_16 None SelectOperate Variation 3 Variation 3
1988 User Data_16.FLOAT_17 None SelectOperate Variation 3 Variation 3
1989 User Data_16.FLOAT_18 None SelectOperate Variation 3 Variation 3
1990 User Data_16.FLOAT_19 None SelectOperate Variation 3 Variation 3
1991 User Data_16.FLOAT_20 None SelectOperate Variation 3 Variation 3
1992 User Data_16.DOUBLE_1 None SelectOperate Variation 4 Variation 4
1993 User Data_16.DOUBLE_2 None SelectOperate Variation 4 Variation 4
1994 User Data_16.DOUBLE_3 None SelectOperate Variation 4 Variation 4
1995 User Data_16.DOUBLE_4 None SelectOperate Variation 4 Variation 4
1996 User Data_16.DOUBLE_5 None SelectOperate Variation 4 Variation 4
1997 User Data_16.DOUBLE_6 None SelectOperate Variation 4 Variation 4
1998 User Data_16.DOUBLE_7 None SelectOperate Variation 4 Variation 4
1999 User Data_16.DOUBLE_8 None SelectOperate Variation 4 Variation 4
2000 User Data_16.DOUBLE_9 None SelectOperate Variation 4 Variation 4
DNP3 Data Point List 151
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2001 User Data_16.DOUBLE_10 None SelectOperate Variation 4 Variation 4
2002 User Data_16.LONG_1 None SelectOperate Variation 1 Variation 1
2003 User Data_16.LONG_2 None SelectOperate Variation 1 Variation 1
2004 User Data_16.LONG_3 None SelectOperate Variation 1 Variation 1
2005 User Data_16.LONG_4 None SelectOperate Variation 1 Variation 1
2006 User Data_16.LONG_5 None SelectOperate Variation 1 Variation 1
2007 User Data_16.LONG_6 None SelectOperate Variation 1 Variation 1
2008 User Data_16.LONG_7 None SelectOperate Variation 1 Variation 1
2009 User Data_16.LONG_8 None SelectOperate Variation 1 Variation 1
2010 User Data_16.LONG_9 None SelectOperate Variation 1 Variation 1
2011 User Data_16.LONG_10 None SelectOperate Variation 1 Variation 1
2012 User Data_16.SHORT_1 None SelectOperate Variation 2 Variation 2
2013 User Data_16.SHORT_2 None SelectOperate Variation 2 Variation 2
2014 User Data_16.SHORT_3 None SelectOperate Variation 2 Variation 2
2015 User Data_16.SHORT_4 None SelectOperate Variation 2 Variation 2
2016 User Data_16.SHORT_5 None SelectOperate Variation 2 Variation 2
2017 User Data_16.SHORT_6 None SelectOperate Variation 2 Variation 2
2018 User Data_16.SHORT_7 None SelectOperate Variation 2 Variation 2
2019 User Data_16.SHORT_8 None SelectOperate Variation 2 Variation 2
2020 User Data_16.SHORT_9 None SelectOperate Variation 2 Variation 2
2021 User Data_16.SHORT_10 None SelectOperate Variation 2 Variation 2
2022 User Data_16.BYTE_1 None SelectOperate Variation 2 Variation 2
2023 User Data_16.BYTE_2 None SelectOperate Variation 2 Variation 2
2024 User Data_16.BYTE_3 None SelectOperate Variation 2 Variation 2
2025 User Data_16.BYTE_4 None SelectOperate Variation 2 Variation 2
2026 User Data_16.BYTE_5 None SelectOperate Variation 2 Variation 2
2027 User Data_16.BYTE_6 None SelectOperate Variation 2 Variation 2
2028 User Data_16.BYTE_7 None SelectOperate Variation 2 Variation 2
2029 User Data_16.BYTE_8 None SelectOperate Variation 2 Variation 2
2030 User Data_16.BYTE_9 None SelectOperate Variation 2 Variation 2
2031 User Data_16.BYTE_10 None SelectOperate Variation 2 Variation 2
2032 User Data_17.FLOAT_1 None SelectOperate Variation 3 Variation 3
152 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2033 User Data_17.FLOAT_2 None SelectOperate Variation 3 Variation 3
2034 User Data_17.FLOAT_3 None SelectOperate Variation 3 Variation 3
2035 User Data_17.FLOAT_4 None SelectOperate Variation 3 Variation 3
2036 User Data_17.FLOAT_5 None SelectOperate Variation 3 Variation 3
2037 User Data_17.FLOAT_6 None SelectOperate Variation 3 Variation 3
2038 User Data_17.FLOAT_7 None SelectOperate Variation 3 Variation 3
2039 User Data_17.FLOAT_8 None SelectOperate Variation 3 Variation 3
2040 User Data_17.FLOAT_9 None SelectOperate Variation 3 Variation 3
2041 User Data_17.FLOAT_10 None SelectOperate Variation 3 Variation 3
2042 User Data_17.FLOAT_11 None SelectOperate Variation 3 Variation 3
2043 User Data_17.FLOAT_12 None SelectOperate Variation 3 Variation 3
2044 User Data_17.FLOAT_13 None SelectOperate Variation 3 Variation 3
2045 User Data_17.FLOAT_14 None SelectOperate Variation 3 Variation 3
2046 User Data_17.FLOAT_15 None SelectOperate Variation 3 Variation 3
2047 User Data_17.FLOAT_16 None SelectOperate Variation 3 Variation 3
2048 User Data_17.FLOAT_17 None SelectOperate Variation 3 Variation 3
2049 User Data_17.FLOAT_18 None SelectOperate Variation 3 Variation 3
2050 User Data_17.FLOAT_19 None SelectOperate Variation 3 Variation 3
2051 User Data_17.FLOAT_20 None SelectOperate Variation 3 Variation 3
2052 User Data_17.DOUBLE_1 None SelectOperate Variation 4 Variation 4
2053 User Data_17.DOUBLE_2 None SelectOperate Variation 4 Variation 4
2054 User Data_17.DOUBLE_3 None SelectOperate Variation 4 Variation 4
2055 User Data_17.DOUBLE_4 None SelectOperate Variation 4 Variation 4
2056 User Data_17.DOUBLE_5 None SelectOperate Variation 4 Variation 4
2057 User Data_17.DOUBLE_6 None SelectOperate Variation 4 Variation 4
2058 User Data_17.DOUBLE_7 None SelectOperate Variation 4 Variation 4
2059 User Data_17.DOUBLE_8 None SelectOperate Variation 4 Variation 4
2060 User Data_17.DOUBLE_9 None SelectOperate Variation 4 Variation 4
2061 User Data_17.DOUBLE_10 None SelectOperate Variation 4 Variation 4
2062 User Data_17.LONG_1 None SelectOperate Variation 1 Variation 1
2063 User Data_17.LONG_2 None SelectOperate Variation 1 Variation 1
2064 User Data_17.LONG_3 None SelectOperate Variation 1 Variation 1
DNP3 Data Point List 153
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2065 User Data_17.LONG_4 None SelectOperate Variation 1 Variation 1
2066 User Data_17.LONG_5 None SelectOperate Variation 1 Variation 1
2067 User Data_17.LONG_6 None SelectOperate Variation 1 Variation 1
2068 User Data_17.LONG_7 None SelectOperate Variation 1 Variation 1
2069 User Data_17.LONG_8 None SelectOperate Variation 1 Variation 1
2070 User Data_17.LONG_9 None SelectOperate Variation 1 Variation 1
2071 User Data_17.LONG_10 None SelectOperate Variation 1 Variation 1
2072 User Data_17.SHORT_1 None SelectOperate Variation 2 Variation 2
2073 User Data_17.SHORT_2 None SelectOperate Variation 2 Variation 2
2074 User Data_17.SHORT_3 None SelectOperate Variation 2 Variation 2
2075 User Data_17.SHORT_4 None SelectOperate Variation 2 Variation 2
2076 User Data_17.SHORT_5 None SelectOperate Variation 2 Variation 2
2077 User Data_17.SHORT_6 None SelectOperate Variation 2 Variation 2
2078 User Data_17.SHORT_7 None SelectOperate Variation 2 Variation 2
2079 User Data_17.SHORT_8 None SelectOperate Variation 2 Variation 2
2080 User Data_17.SHORT_9 None SelectOperate Variation 2 Variation 2
2081 User Data_17.SHORT_10 None SelectOperate Variation 2 Variation 2
2082 User Data_17.BYTE_1 None SelectOperate Variation 2 Variation 2
2083 User Data_17.BYTE_2 None SelectOperate Variation 2 Variation 2
2084 User Data_17.BYTE_3 None SelectOperate Variation 2 Variation 2
2085 User Data_17.BYTE_4 None SelectOperate Variation 2 Variation 2
2086 User Data_17.BYTE_5 None SelectOperate Variation 2 Variation 2
2087 User Data_17.BYTE_6 None SelectOperate Variation 2 Variation 2
2088 User Data_17.BYTE_7 None SelectOperate Variation 2 Variation 2
2089 User Data_17.BYTE_8 None SelectOperate Variation 2 Variation 2
2090 User Data_17.BYTE_9 None SelectOperate Variation 2 Variation 2
2091 User Data_17.BYTE_10 None SelectOperate Variation 2 Variation 2
2092 User Data_18.FLOAT_1 None SelectOperate Variation 3 Variation 3
2093 User Data_18.FLOAT_2 None SelectOperate Variation 3 Variation 3
2094 User Data_18.FLOAT_3 None SelectOperate Variation 3 Variation 3
2095 User Data_18.FLOAT_4 None SelectOperate Variation 3 Variation 3
2096 User Data_18.FLOAT_5 None SelectOperate Variation 3 Variation 3
154 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2097 User Data_18.FLOAT_6 None SelectOperate Variation 3 Variation 3
2098 User Data_18.FLOAT_7 None SelectOperate Variation 3 Variation 3
2099 User Data_18.FLOAT_8 None SelectOperate Variation 3 Variation 3
2100 User Data_18.FLOAT_9 None SelectOperate Variation 3 Variation 3
2101 User Data_18.FLOAT_10 None SelectOperate Variation 3 Variation 3
2102 User Data_18.FLOAT_11 None SelectOperate Variation 3 Variation 3
2103 User Data_18.FLOAT_12 None SelectOperate Variation 3 Variation 3
2104 User Data_18.FLOAT_13 None SelectOperate Variation 3 Variation 3
2105 User Data_18.FLOAT_14 None SelectOperate Variation 3 Variation 3
2106 User Data_18.FLOAT_15 None SelectOperate Variation 3 Variation 3
2107 User Data_18.FLOAT_16 None SelectOperate Variation 3 Variation 3
2108 User Data_18.FLOAT_17 None SelectOperate Variation 3 Variation 3
2109 User Data_18.FLOAT_18 None SelectOperate Variation 3 Variation 3
2110 User Data_18.FLOAT_19 None SelectOperate Variation 3 Variation 3
2111 User Data_18.FLOAT_20 None SelectOperate Variation 3 Variation 3
2112 User Data_18.DOUBLE_1 None SelectOperate Variation 4 Variation 4
2113 User Data_18.DOUBLE_2 None SelectOperate Variation 4 Variation 4
2114 User Data_18.DOUBLE_3 None SelectOperate Variation 4 Variation 4
2115 User Data_18.DOUBLE_4 None SelectOperate Variation 4 Variation 4
2116 User Data_18.DOUBLE_5 None SelectOperate Variation 4 Variation 4
2117 User Data_18.DOUBLE_6 None SelectOperate Variation 4 Variation 4
2118 User Data_18.DOUBLE_7 None SelectOperate Variation 4 Variation 4
2119 User Data_18.DOUBLE_8 None SelectOperate Variation 4 Variation 4
2120 User Data_18.DOUBLE_9 None SelectOperate Variation 4 Variation 4
2121 User Data_18.DOUBLE_10 None SelectOperate Variation 4 Variation 4
2122 User Data_18.LONG_1 None SelectOperate Variation 1 Variation 1
2123 User Data_18.LONG_2 None SelectOperate Variation 1 Variation 1
2124 User Data_18.LONG_3 None SelectOperate Variation 1 Variation 1
2125 User Data_18.LONG_4 None SelectOperate Variation 1 Variation 1
2126 User Data_18.LONG_5 None SelectOperate Variation 1 Variation 1
2127 User Data_18.LONG_6 None SelectOperate Variation 1 Variation 1
2128 User Data_18.LONG_7 None SelectOperate Variation 1 Variation 1
DNP3 Data Point List 155
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2129 User Data_18.LONG_8 None SelectOperate Variation 1 Variation 1
2130 User Data_18.LONG_9 None SelectOperate Variation 1 Variation 1
2131 User Data_18.LONG_10 None SelectOperate Variation 1 Variation 1
2132 User Data_18.SHORT_1 None SelectOperate Variation 2 Variation 2
2133 User Data_18.SHORT_2 None SelectOperate Variation 2 Variation 2
2134 User Data_18.SHORT_3 None SelectOperate Variation 2 Variation 2
2135 User Data_18.SHORT_4 None SelectOperate Variation 2 Variation 2
2136 User Data_18.SHORT_5 None SelectOperate Variation 2 Variation 2
2137 User Data_18.SHORT_6 None SelectOperate Variation 2 Variation 2
2138 User Data_18.SHORT_7 None SelectOperate Variation 2 Variation 2
2139 User Data_18.SHORT_8 None SelectOperate Variation 2 Variation 2
2140 User Data_18.SHORT_9 None SelectOperate Variation 2 Variation 2
2141 User Data_18.SHORT_10 None SelectOperate Variation 2 Variation 2
2142 User Data_18.BYTE_1 None SelectOperate Variation 2 Variation 2
2143 User Data_18.BYTE_2 None SelectOperate Variation 2 Variation 2
2144 User Data_18.BYTE_3 None SelectOperate Variation 2 Variation 2
2145 User Data_18.BYTE_4 None SelectOperate Variation 2 Variation 2
2146 User Data_18.BYTE_5 None SelectOperate Variation 2 Variation 2
2147 User Data_18.BYTE_6 None SelectOperate Variation 2 Variation 2
2148 User Data_18.BYTE_7 None SelectOperate Variation 2 Variation 2
2149 User Data_18.BYTE_8 None SelectOperate Variation 2 Variation 2
2150 User Data_18.BYTE_9 None SelectOperate Variation 2 Variation 2
2151 User Data_18.BYTE_10 None SelectOperate Variation 2 Variation 2
2152 User Data_19.FLOAT_1 None SelectOperate Variation 3 Variation 3
2153 User Data_19.FLOAT_2 None SelectOperate Variation 3 Variation 3
2154 User Data_19.FLOAT_3 None SelectOperate Variation 3 Variation 3
2155 User Data_19.FLOAT_4 None SelectOperate Variation 3 Variation 3
2156 User Data_19.FLOAT_5 None SelectOperate Variation 3 Variation 3
2157 User Data_19.FLOAT_6 None SelectOperate Variation 3 Variation 3
2158 User Data_19.FLOAT_7 None SelectOperate Variation 3 Variation 3
2159 User Data_19.FLOAT_8 None SelectOperate Variation 3 Variation 3
2160 User Data_19.FLOAT_9 None SelectOperate Variation 3 Variation 3
156 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2161 User Data_19.FLOAT_10 None SelectOperate Variation 3 Variation 3
2162 User Data_19.FLOAT_11 None SelectOperate Variation 3 Variation 3
2163 User Data_19.FLOAT_12 None SelectOperate Variation 3 Variation 3
2164 User Data_19.FLOAT_13 None SelectOperate Variation 3 Variation 3
2165 User Data_19.FLOAT_14 None SelectOperate Variation 3 Variation 3
2166 User Data_19.FLOAT_15 None SelectOperate Variation 3 Variation 3
2167 User Data_19.FLOAT_16 None SelectOperate Variation 3 Variation 3
2168 User Data_19.FLOAT_17 None SelectOperate Variation 3 Variation 3
2169 User Data_19.FLOAT_18 None SelectOperate Variation 3 Variation 3
2170 User Data_19.FLOAT_19 None SelectOperate Variation 3 Variation 3
2171 User Data_19.FLOAT_20 None SelectOperate Variation 3 Variation 3
2172 User Data_19.DOUBLE_1 None SelectOperate Variation 4 Variation 4
2173 User Data_19.DOUBLE_2 None SelectOperate Variation 4 Variation 4
2174 User Data_19.DOUBLE_3 None SelectOperate Variation 4 Variation 4
2175 User Data_19.DOUBLE_4 None SelectOperate Variation 4 Variation 4
2176 User Data_19.DOUBLE_5 None SelectOperate Variation 4 Variation 4
2177 User Data_19.DOUBLE_6 None SelectOperate Variation 4 Variation 4
2178 User Data_19.DOUBLE_7 None SelectOperate Variation 4 Variation 4
2179 User Data_19.DOUBLE_8 None SelectOperate Variation 4 Variation 4
2180 User Data_19.DOUBLE_9 None SelectOperate Variation 4 Variation 4
2181 User Data_19.DOUBLE_10 None SelectOperate Variation 4 Variation 4
2182 User Data_19.LONG_1 None SelectOperate Variation 1 Variation 1
2183 User Data_19.LONG_2 None SelectOperate Variation 1 Variation 1
2184 User Data_19.LONG_3 None SelectOperate Variation 1 Variation 1
2185 User Data_19.LONG_4 None SelectOperate Variation 1 Variation 1
2186 User Data_19.LONG_5 None SelectOperate Variation 1 Variation 1
2187 User Data_19.LONG_6 None SelectOperate Variation 1 Variation 1
2188 User Data_19.LONG_7 None SelectOperate Variation 1 Variation 1
2189 User Data_19.LONG_8 None SelectOperate Variation 1 Variation 1
2190 User Data_19.LONG_9 None SelectOperate Variation 1 Variation 1
2191 User Data_19.LONG_10 None SelectOperate Variation 1 Variation 1
2192 User Data_19.SHORT_1 None SelectOperate Variation 2 Variation 2
DNP3 Data Point List 157
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2193 User Data_19.SHORT_2 None SelectOperate Variation 2 Variation 2
2194 User Data_19.SHORT_3 None SelectOperate Variation 2 Variation 2
2195 User Data_19.SHORT_4 None SelectOperate Variation 2 Variation 2
2196 User Data_19.SHORT_5 None SelectOperate Variation 2 Variation 2
2197 User Data_19.SHORT_6 None SelectOperate Variation 2 Variation 2
2198 User Data_19.SHORT_7 None SelectOperate Variation 2 Variation 2
2199 User Data_19.SHORT_8 None SelectOperate Variation 2 Variation 2
2200 User Data_19.SHORT_9 None SelectOperate Variation 2 Variation 2
2201 User Data_19.SHORT_10 None SelectOperate Variation 2 Variation 2
2202 User Data_19.BYTE_1 None SelectOperate Variation 2 Variation 2
2203 User Data_19.BYTE_2 None SelectOperate Variation 2 Variation 2
2204 User Data_19.BYTE_3 None SelectOperate Variation 2 Variation 2
2205 User Data_19.BYTE_4 None SelectOperate Variation 2 Variation 2
2206 User Data_19.BYTE_5 None SelectOperate Variation 2 Variation 2
2207 User Data_19.BYTE_6 None SelectOperate Variation 2 Variation 2
2208 User Data_19.BYTE_7 None SelectOperate Variation 2 Variation 2
2209 User Data_19.BYTE_8 None SelectOperate Variation 2 Variation 2
2210 User Data_19.BYTE_9 None SelectOperate Variation 2 Variation 2
2211 User Data_19.BYTE_10 None SelectOperate Variation 2 Variation 2
2212 User Data_20.FLOAT_1 None SelectOperate Variation 3 Variation 3
2213 User Data_20.FLOAT_2 None SelectOperate Variation 3 Variation 3
2214 User Data_20.FLOAT_3 None SelectOperate Variation 3 Variation 3
2215 User Data_20.FLOAT_4 None SelectOperate Variation 3 Variation 3
2216 User Data_20.FLOAT_5 None SelectOperate Variation 3 Variation 3
2217 User Data_20.FLOAT_6 None SelectOperate Variation 3 Variation 3
2218 User Data_20.FLOAT_7 None SelectOperate Variation 3 Variation 3
2219 User Data_20.FLOAT_8 None SelectOperate Variation 3 Variation 3
2220 User Data_20.FLOAT_9 None SelectOperate Variation 3 Variation 3
2221 User Data_20.FLOAT_10 None SelectOperate Variation 3 Variation 3
2222 User Data_20.FLOAT_11 None SelectOperate Variation 3 Variation 3
2223 User Data_20.FLOAT_12 None SelectOperate Variation 3 Variation 3
2224 User Data_20.FLOAT_13 None SelectOperate Variation 3 Variation 3
158 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2225 User Data_20.FLOAT_14 None SelectOperate Variation 3 Variation 3
2226 User Data_20.FLOAT_15 None SelectOperate Variation 3 Variation 3
2227 User Data_20.FLOAT_16 None SelectOperate Variation 3 Variation 3
2228 User Data_20.FLOAT_17 None SelectOperate Variation 3 Variation 3
2229 User Data_20.FLOAT_18 None SelectOperate Variation 3 Variation 3
2230 User Data_20.FLOAT_19 None SelectOperate Variation 3 Variation 3
2231 User Data_20.FLOAT_20 None SelectOperate Variation 3 Variation 3
2232 User Data_20.DOUBLE_1 None SelectOperate Variation 4 Variation 4
2233 User Data_20.DOUBLE_2 None SelectOperate Variation 4 Variation 4
2234 User Data_20.DOUBLE_3 None SelectOperate Variation 4 Variation 4
2235 User Data_20.DOUBLE_4 None SelectOperate Variation 4 Variation 4
2236 User Data_20.DOUBLE_5 None SelectOperate Variation 4 Variation 4
2237 User Data_20.DOUBLE_6 None SelectOperate Variation 4 Variation 4
2238 User Data_20.DOUBLE_7 None SelectOperate Variation 4 Variation 4
2239 User Data_20.DOUBLE_8 None SelectOperate Variation 4 Variation 4
2240 User Data_20.DOUBLE_9 None SelectOperate Variation 4 Variation 4
2241 User Data_20.DOUBLE_10 None SelectOperate Variation 4 Variation 4
2242 User Data_20.LONG_1 None SelectOperate Variation 1 Variation 1
2243 User Data_20.LONG_2 None SelectOperate Variation 1 Variation 1
2244 User Data_20.LONG_3 None SelectOperate Variation 1 Variation 1
2245 User Data_20.LONG_4 None SelectOperate Variation 1 Variation 1
2246 User Data_20.LONG_5 None SelectOperate Variation 1 Variation 1
2247 User Data_20.LONG_6 None SelectOperate Variation 1 Variation 1
2248 User Data_20.LONG_7 None SelectOperate Variation 1 Variation 1
2249 User Data_20.LONG_8 None SelectOperate Variation 1 Variation 1
2250 User Data_20.LONG_9 None SelectOperate Variation 1 Variation 1
2251 User Data_20.LONG_10 None SelectOperate Variation 1 Variation 1
2252 User Data_20.SHORT_1 None SelectOperate Variation 2 Variation 2
2253 User Data_20.SHORT_2 None SelectOperate Variation 2 Variation 2
2254 User Data_20.SHORT_3 None SelectOperate Variation 2 Variation 2
2255 User Data_20.SHORT_4 None SelectOperate Variation 2 Variation 2
2256 User Data_20.SHORT_5 None SelectOperate Variation 2 Variation 2
DNP3 Data Point List 159
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2257 User Data_20.SHORT_6 None SelectOperate Variation 2 Variation 2
2258 User Data_20.SHORT_7 None SelectOperate Variation 2 Variation 2
2259 User Data_20.SHORT_8 None SelectOperate Variation 2 Variation 2
2260 User Data_20.SHORT_9 None SelectOperate Variation 2 Variation 2
2261 User Data_20.SHORT_10 None SelectOperate Variation 2 Variation 2
2262 User Data_20.BYTE_1 None SelectOperate Variation 2 Variation 2
2263 User Data_20.BYTE_2 None SelectOperate Variation 2 Variation 2
2264 User Data_20.BYTE_3 None SelectOperate Variation 2 Variation 2
2265 User Data_20.BYTE_4 None SelectOperate Variation 2 Variation 2
2266 User Data_20.BYTE_5 None SelectOperate Variation 2 Variation 2
2267 User Data_20.BYTE_6 None SelectOperate Variation 2 Variation 2
2268 User Data_20.BYTE_7 None SelectOperate Variation 2 Variation 2
2269 User Data_20.BYTE_8 None SelectOperate Variation 2 Variation 2
2270 User Data_20.BYTE_9 None SelectOperate Variation 2 Variation 2
2271 User Data_20.BYTE_10 None SelectOperate Variation 2 Variation 2
2272 User Data_21.FLOAT_1 None SelectOperate Variation 3 Variation 3
2273 User Data_21.FLOAT_2 None SelectOperate Variation 3 Variation 3
2274 User Data_21.FLOAT_3 None SelectOperate Variation 3 Variation 3
2275 User Data_21.FLOAT_4 None SelectOperate Variation 3 Variation 3
2276 User Data_21.FLOAT_5 None SelectOperate Variation 3 Variation 3
2277 User Data_21.FLOAT_6 None SelectOperate Variation 3 Variation 3
2278 User Data_21.FLOAT_7 None SelectOperate Variation 3 Variation 3
2279 User Data_21.FLOAT_8 None SelectOperate Variation 3 Variation 3
2280 User Data_21.FLOAT_9 None SelectOperate Variation 3 Variation 3
2281 User Data_21.FLOAT_10 None SelectOperate Variation 3 Variation 3
2282 User Data_21.FLOAT_11 None SelectOperate Variation 3 Variation 3
2283 User Data_21.FLOAT_12 None SelectOperate Variation 3 Variation 3
2284 User Data_21.FLOAT_13 None SelectOperate Variation 3 Variation 3
2285 User Data_21.FLOAT_14 None SelectOperate Variation 3 Variation 3
2286 User Data_21.FLOAT_15 None SelectOperate Variation 3 Variation 3
2287 User Data_21.FLOAT_16 None SelectOperate Variation 3 Variation 3
2288 User Data_21.FLOAT_17 None SelectOperate Variation 3 Variation 3
160 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2289 User Data_21.FLOAT_18 None SelectOperate Variation 3 Variation 3
2290 User Data_21.FLOAT_19 None SelectOperate Variation 3 Variation 3
2291 User Data_21.FLOAT_20 None SelectOperate Variation 3 Variation 3
2292 User Data_21.DOUBLE_1 None SelectOperate Variation 4 Variation 4
2293 User Data_21.DOUBLE_2 None SelectOperate Variation 4 Variation 4
2294 User Data_21.DOUBLE_3 None SelectOperate Variation 4 Variation 4
2295 User Data_21.DOUBLE_4 None SelectOperate Variation 4 Variation 4
2296 User Data_21.DOUBLE_5 None SelectOperate Variation 4 Variation 4
2297 User Data_21.DOUBLE_6 None SelectOperate Variation 4 Variation 4
2298 User Data_21.DOUBLE_7 None SelectOperate Variation 4 Variation 4
2299 User Data_21.DOUBLE_8 None SelectOperate Variation 4 Variation 4
2300 User Data_21.DOUBLE_9 None SelectOperate Variation 4 Variation 4
2301 User Data_21.DOUBLE_10 None SelectOperate Variation 4 Variation 4
2302 User Data_21.LONG_1 None SelectOperate Variation 1 Variation 1
2303 User Data_21.LONG_2 None SelectOperate Variation 1 Variation 1
2304 User Data_21.LONG_3 None SelectOperate Variation 1 Variation 1
2305 User Data_21.LONG_4 None SelectOperate Variation 1 Variation 1
2306 User Data_21.LONG_5 None SelectOperate Variation 1 Variation 1
2307 User Data_21.LONG_6 None SelectOperate Variation 1 Variation 1
2308 User Data_21.LONG_7 None SelectOperate Variation 1 Variation 1
2309 User Data_21.LONG_8 None SelectOperate Variation 1 Variation 1
2310 User Data_21.LONG_9 None SelectOperate Variation 1 Variation 1
2311 User Data_21.LONG_10 None SelectOperate Variation 1 Variation 1
2312 User Data_21.SHORT_1 None SelectOperate Variation 2 Variation 2
2313 User Data_21.SHORT_2 None SelectOperate Variation 2 Variation 2
2314 User Data_21.SHORT_3 None SelectOperate Variation 2 Variation 2
2315 User Data_21.SHORT_4 None SelectOperate Variation 2 Variation 2
2316 User Data_21.SHORT_5 None SelectOperate Variation 2 Variation 2
2317 User Data_21.SHORT_6 None SelectOperate Variation 2 Variation 2
2318 User Data_21.SHORT_7 None SelectOperate Variation 2 Variation 2
2319 User Data_21.SHORT_8 None SelectOperate Variation 2 Variation 2
2320 User Data_21.SHORT_9 None SelectOperate Variation 2 Variation 2
DNP3 Data Point List 161
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2321 User Data_21.SHORT_10 None SelectOperate Variation 2 Variation 2
2322 User Data_21.BYTE_1 None SelectOperate Variation 2 Variation 2
2323 User Data_21.BYTE_2 None SelectOperate Variation 2 Variation 2
2324 User Data_21.BYTE_3 None SelectOperate Variation 2 Variation 2
2325 User Data_21.BYTE_4 None SelectOperate Variation 2 Variation 2
2326 User Data_21.BYTE_5 None SelectOperate Variation 2 Variation 2
2327 User Data_21.BYTE_6 None SelectOperate Variation 2 Variation 2
2328 User Data_21.BYTE_7 None SelectOperate Variation 2 Variation 2
2329 User Data_21.BYTE_8 None SelectOperate Variation 2 Variation 2
2330 User Data_21.BYTE_9 None SelectOperate Variation 2 Variation 2
2331 User Data_21.BYTE_10 None SelectOperate Variation 2 Variation 2
2332 User Data_22.FLOAT_1 None SelectOperate Variation 3 Variation 3
2333 User Data_22.FLOAT_2 None SelectOperate Variation 3 Variation 3
2334 User Data_22.FLOAT_3 None SelectOperate Variation 3 Variation 3
2335 User Data_22.FLOAT_4 None SelectOperate Variation 3 Variation 3
2336 User Data_22.FLOAT_5 None SelectOperate Variation 3 Variation 3
2337 User Data_22.FLOAT_6 None SelectOperate Variation 3 Variation 3
2338 User Data_22.FLOAT_7 None SelectOperate Variation 3 Variation 3
2339 User Data_22.FLOAT_8 None SelectOperate Variation 3 Variation 3
2340 User Data_22.FLOAT_9 None SelectOperate Variation 3 Variation 3
2341 User Data_22.FLOAT_10 None SelectOperate Variation 3 Variation 3
2342 User Data_22.FLOAT_11 None SelectOperate Variation 3 Variation 3
2343 User Data_22.FLOAT_12 None SelectOperate Variation 3 Variation 3
2344 User Data_22.FLOAT_13 None SelectOperate Variation 3 Variation 3
2345 User Data_22.FLOAT_14 None SelectOperate Variation 3 Variation 3
2346 User Data_22.FLOAT_15 None SelectOperate Variation 3 Variation 3
2347 User Data_22.FLOAT_16 None SelectOperate Variation 3 Variation 3
2348 User Data_22.FLOAT_17 None SelectOperate Variation 3 Variation 3
2349 User Data_22.FLOAT_18 None SelectOperate Variation 3 Variation 3
2350 User Data_22.FLOAT_19 None SelectOperate Variation 3 Variation 3
2351 User Data_22.FLOAT_20 None SelectOperate Variation 3 Variation 3
2352 User Data_22.DOUBLE_1 None SelectOperate Variation 4 Variation 4
162 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2353 User Data_22.DOUBLE_2 None SelectOperate Variation 4 Variation 4
2354 User Data_22.DOUBLE_3 None SelectOperate Variation 4 Variation 4
2355 User Data_22.DOUBLE_4 None SelectOperate Variation 4 Variation 4
2356 User Data_22.DOUBLE_5 None SelectOperate Variation 4 Variation 4
2357 User Data_22.DOUBLE_6 None SelectOperate Variation 4 Variation 4
2358 User Data_22.DOUBLE_7 None SelectOperate Variation 4 Variation 4
2359 User Data_22.DOUBLE_8 None SelectOperate Variation 4 Variation 4
2360 User Data_22.DOUBLE_9 None SelectOperate Variation 4 Variation 4
2361 User Data_22.DOUBLE_10 None SelectOperate Variation 4 Variation 4
2362 User Data_22.LONG_1 None SelectOperate Variation 1 Variation 1
2363 User Data_22.LONG_2 None SelectOperate Variation 1 Variation 1
2364 User Data_22.LONG_3 None SelectOperate Variation 1 Variation 1
2365 User Data_22.LONG_4 None SelectOperate Variation 1 Variation 1
2366 User Data_22.LONG_5 None SelectOperate Variation 1 Variation 1
2367 User Data_22.LONG_6 None SelectOperate Variation 1 Variation 1
2368 User Data_22.LONG_7 None SelectOperate Variation 1 Variation 1
2369 User Data_22.LONG_8 None SelectOperate Variation 1 Variation 1
2370 User Data_22.LONG_9 None SelectOperate Variation 1 Variation 1
2371 User Data_22.LONG_10 None SelectOperate Variation 1 Variation 1
2372 User Data_22.SHORT_1 None SelectOperate Variation 2 Variation 2
2373 User Data_22.SHORT_2 None SelectOperate Variation 2 Variation 2
2374 User Data_22.SHORT_3 None SelectOperate Variation 2 Variation 2
2375 User Data_22.SHORT_4 None SelectOperate Variation 2 Variation 2
2376 User Data_22.SHORT_5 None SelectOperate Variation 2 Variation 2
2377 User Data_22.SHORT_6 None SelectOperate Variation 2 Variation 2
2378 User Data_22.SHORT_7 None SelectOperate Variation 2 Variation 2
2379 User Data_22.SHORT_8 None SelectOperate Variation 2 Variation 2
2380 User Data_22.SHORT_9 None SelectOperate Variation 2 Variation 2
2381 User Data_22.SHORT_10 None SelectOperate Variation 2 Variation 2
2382 User Data_22.BYTE_1 None SelectOperate Variation 2 Variation 2
2383 User Data_22.BYTE_2 None SelectOperate Variation 2 Variation 2
2384 User Data_22.BYTE_3 None SelectOperate Variation 2 Variation 2
DNP3 Data Point List 163
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2385 User Data_22.BYTE_4 None SelectOperate Variation 2 Variation 2
2386 User Data_22.BYTE_5 None SelectOperate Variation 2 Variation 2
2387 User Data_22.BYTE_6 None SelectOperate Variation 2 Variation 2
2388 User Data_22.BYTE_7 None SelectOperate Variation 2 Variation 2
2389 User Data_22.BYTE_8 None SelectOperate Variation 2 Variation 2
2390 User Data_22.BYTE_9 None SelectOperate Variation 2 Variation 2
2391 User Data_22.BYTE_10 None SelectOperate Variation 2 Variation 2
2392 User Data_23.FLOAT_1 None SelectOperate Variation 3 Variation 3
2393 User Data_23.FLOAT_2 None SelectOperate Variation 3 Variation 3
2394 User Data_23.FLOAT_3 None SelectOperate Variation 3 Variation 3
2395 User Data_23.FLOAT_4 None SelectOperate Variation 3 Variation 3
2396 User Data_23.FLOAT_5 None SelectOperate Variation 3 Variation 3
2397 User Data_23.FLOAT_6 None SelectOperate Variation 3 Variation 3
2398 User Data_23.FLOAT_7 None SelectOperate Variation 3 Variation 3
2399 User Data_23.FLOAT_8 None SelectOperate Variation 3 Variation 3
2400 User Data_23.FLOAT_9 None SelectOperate Variation 3 Variation 3
2401 User Data_23.FLOAT_10 None SelectOperate Variation 3 Variation 3
2402 User Data_23.FLOAT_11 None SelectOperate Variation 3 Variation 3
2403 User Data_23.FLOAT_12 None SelectOperate Variation 3 Variation 3
2404 User Data_23.FLOAT_13 None SelectOperate Variation 3 Variation 3
2405 User Data_23.FLOAT_14 None SelectOperate Variation 3 Variation 3
2406 User Data_23.FLOAT_15 None SelectOperate Variation 3 Variation 3
2407 User Data_23.FLOAT_16 None SelectOperate Variation 3 Variation 3
2408 User Data_23.FLOAT_17 None SelectOperate Variation 3 Variation 3
2409 User Data_23.FLOAT_18 None SelectOperate Variation 3 Variation 3
2410 User Data_23.FLOAT_19 None SelectOperate Variation 3 Variation 3
2411 User Data_23.FLOAT_20 None SelectOperate Variation 3 Variation 3
2412 User Data_23.DOUBLE_1 None SelectOperate Variation 4 Variation 4
2413 User Data_23.DOUBLE_2 None SelectOperate Variation 4 Variation 4
2414 User Data_23.DOUBLE_3 None SelectOperate Variation 4 Variation 4
2415 User Data_23.DOUBLE_4 None SelectOperate Variation 4 Variation 4
2416 User Data_23.DOUBLE_5 None SelectOperate Variation 4 Variation 4
164 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2417 User Data_23.DOUBLE_6 None SelectOperate Variation 4 Variation 4
2418 User Data_23.DOUBLE_7 None SelectOperate Variation 4 Variation 4
2419 User Data_23.DOUBLE_8 None SelectOperate Variation 4 Variation 4
2420 User Data_23.DOUBLE_9 None SelectOperate Variation 4 Variation 4
2421 User Data_23.DOUBLE_10 None SelectOperate Variation 4 Variation 4
2422 User Data_23.LONG_1 None SelectOperate Variation 1 Variation 1
2423 User Data_23.LONG_2 None SelectOperate Variation 1 Variation 1
2424 User Data_23.LONG_3 None SelectOperate Variation 1 Variation 1
2425 User Data_23.LONG_4 None SelectOperate Variation 1 Variation 1
2426 User Data_23.LONG_5 None SelectOperate Variation 1 Variation 1
2427 User Data_23.LONG_6 None SelectOperate Variation 1 Variation 1
2428 User Data_23.LONG_7 None SelectOperate Variation 1 Variation 1
2429 User Data_23.LONG_8 None SelectOperate Variation 1 Variation 1
2430 User Data_23.LONG_9 None SelectOperate Variation 1 Variation 1
2431 User Data_23.LONG_10 None SelectOperate Variation 1 Variation 1
2432 User Data_23.SHORT_1 None SelectOperate Variation 2 Variation 2
2433 User Data_23.SHORT_2 None SelectOperate Variation 2 Variation 2
2434 User Data_23.SHORT_3 None SelectOperate Variation 2 Variation 2
2435 User Data_23.SHORT_4 None SelectOperate Variation 2 Variation 2
2436 User Data_23.SHORT_5 None SelectOperate Variation 2 Variation 2
2437 User Data_23.SHORT_6 None SelectOperate Variation 2 Variation 2
2438 User Data_23.SHORT_7 None SelectOperate Variation 2 Variation 2
2439 User Data_23.SHORT_8 None SelectOperate Variation 2 Variation 2
2440 User Data_23.SHORT_9 None SelectOperate Variation 2 Variation 2
2441 User Data_23.SHORT_10 None SelectOperate Variation 2 Variation 2
2442 User Data_23.BYTE_1 None SelectOperate Variation 2 Variation 2
2443 User Data_23.BYTE_2 None SelectOperate Variation 2 Variation 2
2444 User Data_23.BYTE_3 None SelectOperate Variation 2 Variation 2
2445 User Data_23.BYTE_4 None SelectOperate Variation 2 Variation 2
2446 User Data_23.BYTE_5 None SelectOperate Variation 2 Variation 2
2447 User Data_23.BYTE_6 None SelectOperate Variation 2 Variation 2
2448 User Data_23.BYTE_7 None SelectOperate Variation 2 Variation 2
DNP3 Data Point List 165
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2449 User Data_23.BYTE_8 None SelectOperate Variation 2 Variation 2
2450 User Data_23.BYTE_9 None SelectOperate Variation 2 Variation 2
2451 User Data_23.BYTE_10 None SelectOperate Variation 2 Variation 2
2452 User Data_24.FLOAT_1 None SelectOperate Variation 3 Variation 3
2453 User Data_24.FLOAT_2 None SelectOperate Variation 3 Variation 3
2454 User Data_24.FLOAT_3 None SelectOperate Variation 3 Variation 3
2455 User Data_24.FLOAT_4 None SelectOperate Variation 3 Variation 3
2456 User Data_24.FLOAT_5 None SelectOperate Variation 3 Variation 3
2457 User Data_24.FLOAT_6 None SelectOperate Variation 3 Variation 3
2458 User Data_24.FLOAT_7 None SelectOperate Variation 3 Variation 3
2459 User Data_24.FLOAT_8 None SelectOperate Variation 3 Variation 3
2460 User Data_24.FLOAT_9 None SelectOperate Variation 3 Variation 3
2461 User Data_24.FLOAT_10 None SelectOperate Variation 3 Variation 3
2462 User Data_24.FLOAT_11 None SelectOperate Variation 3 Variation 3
2463 User Data_24.FLOAT_12 None SelectOperate Variation 3 Variation 3
2464 User Data_24.FLOAT_13 None SelectOperate Variation 3 Variation 3
2465 User Data_24.FLOAT_14 None SelectOperate Variation 3 Variation 3
2466 User Data_24.FLOAT_15 None SelectOperate Variation 3 Variation 3
2467 User Data_24.FLOAT_16 None SelectOperate Variation 3 Variation 3
2468 User Data_24.FLOAT_17 None SelectOperate Variation 3 Variation 3
2469 User Data_24.FLOAT_18 None SelectOperate Variation 3 Variation 3
2470 User Data_24.FLOAT_19 None SelectOperate Variation 3 Variation 3
2471 User Data_24.FLOAT_20 None SelectOperate Variation 3 Variation 3
2472 User Data_24.DOUBLE_1 None SelectOperate Variation 4 Variation 4
2473 User Data_24.DOUBLE_2 None SelectOperate Variation 4 Variation 4
2474 User Data_24.DOUBLE_3 None SelectOperate Variation 4 Variation 4
2475 User Data_24.DOUBLE_4 None SelectOperate Variation 4 Variation 4
2476 User Data_24.DOUBLE_5 None SelectOperate Variation 4 Variation 4
2477 User Data_24.DOUBLE_6 None SelectOperate Variation 4 Variation 4
2478 User Data_24.DOUBLE_7 None SelectOperate Variation 4 Variation 4
2479 User Data_24.DOUBLE_8 None SelectOperate Variation 4 Variation 4
2480 User Data_24.DOUBLE_9 None SelectOperate Variation 4 Variation 4
166 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2481 User Data_24.DOUBLE_10 None SelectOperate Variation 4 Variation 4
2482 User Data_24.LONG_1 None SelectOperate Variation 1 Variation 1
2483 User Data_24.LONG_2 None SelectOperate Variation 1 Variation 1
2484 User Data_24.LONG_3 None SelectOperate Variation 1 Variation 1
2485 User Data_24.LONG_4 None SelectOperate Variation 1 Variation 1
2486 User Data_24.LONG_5 None SelectOperate Variation 1 Variation 1
2487 User Data_24.LONG_6 None SelectOperate Variation 1 Variation 1
2488 User Data_24.LONG_7 None SelectOperate Variation 1 Variation 1
2489 User Data_24.LONG_8 None SelectOperate Variation 1 Variation 1
2490 User Data_24.LONG_9 None SelectOperate Variation 1 Variation 1
2491 User Data_24.LONG_10 None SelectOperate Variation 1 Variation 1
2492 User Data_24.SHORT_1 None SelectOperate Variation 2 Variation 2
2493 User Data_24.SHORT_2 None SelectOperate Variation 2 Variation 2
2494 User Data_24.SHORT_3 None SelectOperate Variation 2 Variation 2
2495 User Data_24.SHORT_4 None SelectOperate Variation 2 Variation 2
2496 User Data_24.SHORT_5 None SelectOperate Variation 2 Variation 2
2497 User Data_24.SHORT_6 None SelectOperate Variation 2 Variation 2
2498 User Data_24.SHORT_7 None SelectOperate Variation 2 Variation 2
2499 User Data_24.SHORT_8 None SelectOperate Variation 2 Variation 2
2500 User Data_24.SHORT_9 None SelectOperate Variation 2 Variation 2
2501 User Data_24.SHORT_10 None SelectOperate Variation 2 Variation 2
2502 User Data_24.BYTE_1 None SelectOperate Variation 2 Variation 2
2503 User Data_24.BYTE_2 None SelectOperate Variation 2 Variation 2
2504 User Data_24.BYTE_3 None SelectOperate Variation 2 Variation 2
2505 User Data_24.BYTE_4 None SelectOperate Variation 2 Variation 2
2506 User Data_24.BYTE_5 None SelectOperate Variation 2 Variation 2
2507 User Data_24.BYTE_6 None SelectOperate Variation 2 Variation 2
2508 User Data_24.BYTE_7 None SelectOperate Variation 2 Variation 2
2509 User Data_24.BYTE_8 None SelectOperate Variation 2 Variation 2
2510 User Data_24.BYTE_9 None SelectOperate Variation 2 Variation 2
2511 User Data_24.BYTE_10 None SelectOperate Variation 2 Variation 2
2512 User Data_25.FLOAT_1 None SelectOperate Variation 3 Variation 3
DNP3 Data Point List 167
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2513 User Data_25.FLOAT_2 None SelectOperate Variation 3 Variation 3
2514 User Data_25.FLOAT_3 None SelectOperate Variation 3 Variation 3
2515 User Data_25.FLOAT_4 None SelectOperate Variation 3 Variation 3
2516 User Data_25.FLOAT_5 None SelectOperate Variation 3 Variation 3
2517 User Data_25.FLOAT_6 None SelectOperate Variation 3 Variation 3
2518 User Data_25.FLOAT_7 None SelectOperate Variation 3 Variation 3
2519 User Data_25.FLOAT_8 None SelectOperate Variation 3 Variation 3
2520 User Data_25.FLOAT_9 None SelectOperate Variation 3 Variation 3
2521 User Data_25.FLOAT_10 None SelectOperate Variation 3 Variation 3
2522 User Data_25.FLOAT_11 None SelectOperate Variation 3 Variation 3
2523 User Data_25.FLOAT_12 None SelectOperate Variation 3 Variation 3
2524 User Data_25.FLOAT_13 None SelectOperate Variation 3 Variation 3
2525 User Data_25.FLOAT_14 None SelectOperate Variation 3 Variation 3
2526 User Data_25.FLOAT_15 None SelectOperate Variation 3 Variation 3
2527 User Data_25.FLOAT_16 None SelectOperate Variation 3 Variation 3
2528 User Data_25.FLOAT_17 None SelectOperate Variation 3 Variation 3
2529 User Data_25.FLOAT_18 None SelectOperate Variation 3 Variation 3
2530 User Data_25.FLOAT_19 None SelectOperate Variation 3 Variation 3
2531 User Data_25.FLOAT_20 None SelectOperate Variation 3 Variation 3
2532 User Data_25.DOUBLE_1 None SelectOperate Variation 4 Variation 4
2533 User Data_25.DOUBLE_2 None SelectOperate Variation 4 Variation 4
2534 User Data_25.DOUBLE_3 None SelectOperate Variation 4 Variation 4
2535 User Data_25.DOUBLE_4 None SelectOperate Variation 4 Variation 4
2536 User Data_25.DOUBLE_5 None SelectOperate Variation 4 Variation 4
2537 User Data_25.DOUBLE_6 None SelectOperate Variation 4 Variation 4
2538 User Data_25.DOUBLE_7 None SelectOperate Variation 4 Variation 4
2539 User Data_25.DOUBLE_8 None SelectOperate Variation 4 Variation 4
2540 User Data_25.DOUBLE_9 None SelectOperate Variation 4 Variation 4
2541 User Data_25.DOUBLE_10 None SelectOperate Variation 4 Variation 4
2542 User Data_25.LONG_1 None SelectOperate Variation 1 Variation 1
2543 User Data_25.LONG_2 None SelectOperate Variation 1 Variation 1
2544 User Data_25.LONG_3 None SelectOperate Variation 1 Variation 1
168 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2545 User Data_25.LONG_4 None SelectOperate Variation 1 Variation 1
2546 User Data_25.LONG_5 None SelectOperate Variation 1 Variation 1
2547 User Data_25.LONG_6 None SelectOperate Variation 1 Variation 1
2548 User Data_25.LONG_7 None SelectOperate Variation 1 Variation 1
2549 User Data_25.LONG_8 None SelectOperate Variation 1 Variation 1
2550 User Data_25.LONG_9 None SelectOperate Variation 1 Variation 1
2551 User Data_25.LONG_10 None SelectOperate Variation 1 Variation 1
2552 User Data_25.SHORT_1 None SelectOperate Variation 2 Variation 2
2553 User Data_25.SHORT_2 None SelectOperate Variation 2 Variation 2
2554 User Data_25.SHORT_3 None SelectOperate Variation 2 Variation 2
2555 User Data_25.SHORT_4 None SelectOperate Variation 2 Variation 2
2556 User Data_25.SHORT_5 None SelectOperate Variation 2 Variation 2
2557 User Data_25.SHORT_6 None SelectOperate Variation 2 Variation 2
2558 User Data_25.SHORT_7 None SelectOperate Variation 2 Variation 2
2559 User Data_25.SHORT_8 None SelectOperate Variation 2 Variation 2
2560 User Data_25.SHORT_9 None SelectOperate Variation 2 Variation 2
2561 User Data_25.SHORT_10 None SelectOperate Variation 2 Variation 2
2562 User Data_25.BYTE_1 None SelectOperate Variation 2 Variation 2
2563 User Data_25.BYTE_2 None SelectOperate Variation 2 Variation 2
2564 User Data_25.BYTE_3 None SelectOperate Variation 2 Variation 2
2565 User Data_25.BYTE_4 None SelectOperate Variation 2 Variation 2
2566 User Data_25.BYTE_5 None SelectOperate Variation 2 Variation 2
2567 User Data_25.BYTE_6 None SelectOperate Variation 2 Variation 2
2568 User Data_25.BYTE_7 None SelectOperate Variation 2 Variation 2
2569 User Data_25.BYTE_8 None SelectOperate Variation 2 Variation 2
2570 User Data_25.BYTE_9 None SelectOperate Variation 2 Variation 2
2571 User Data_25.BYTE_10 None SelectOperate Variation 2 Variation 2
2572 User Data_26.FLOAT_1 None SelectOperate Variation 3 Variation 3
2573 User Data_26.FLOAT_2 None SelectOperate Variation 3 Variation 3
2574 User Data_26.FLOAT_3 None SelectOperate Variation 3 Variation 3
2575 User Data_26.FLOAT_4 None SelectOperate Variation 3 Variation 3
2576 User Data_26.FLOAT_5 None SelectOperate Variation 3 Variation 3
DNP3 Data Point List 169
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2577 User Data_26.FLOAT_6 None SelectOperate Variation 3 Variation 3
2578 User Data_26.FLOAT_7 None SelectOperate Variation 3 Variation 3
2579 User Data_26.FLOAT_8 None SelectOperate Variation 3 Variation 3
2580 User Data_26.FLOAT_9 None SelectOperate Variation 3 Variation 3
2581 User Data_26.FLOAT_10 None SelectOperate Variation 3 Variation 3
2582 User Data_26.FLOAT_11 None SelectOperate Variation 3 Variation 3
2583 User Data_26.FLOAT_12 None SelectOperate Variation 3 Variation 3
2584 User Data_26.FLOAT_13 None SelectOperate Variation 3 Variation 3
2585 User Data_26.FLOAT_14 None SelectOperate Variation 3 Variation 3
2586 User Data_26.FLOAT_15 None SelectOperate Variation 3 Variation 3
2587 User Data_26.FLOAT_16 None SelectOperate Variation 3 Variation 3
2588 User Data_26.FLOAT_17 None SelectOperate Variation 3 Variation 3
2589 User Data_26.FLOAT_18 None SelectOperate Variation 3 Variation 3
2590 User Data_26.FLOAT_19 None SelectOperate Variation 3 Variation 3
2591 User Data_26.FLOAT_20 None SelectOperate Variation 3 Variation 3
2592 User Data_26.DOUBLE_1 None SelectOperate Variation 4 Variation 4
2593 User Data_26.DOUBLE_2 None SelectOperate Variation 4 Variation 4
2594 User Data_26.DOUBLE_3 None SelectOperate Variation 4 Variation 4
2595 User Data_26.DOUBLE_4 None SelectOperate Variation 4 Variation 4
2596 User Data_26.DOUBLE_5 None SelectOperate Variation 4 Variation 4
2597 User Data_26.DOUBLE_6 None SelectOperate Variation 4 Variation 4
2598 User Data_26.DOUBLE_7 None SelectOperate Variation 4 Variation 4
2599 User Data_26.DOUBLE_8 None SelectOperate Variation 4 Variation 4
2600 User Data_26.DOUBLE_9 None SelectOperate Variation 4 Variation 4
2601 User Data_26.DOUBLE_10 None SelectOperate Variation 4 Variation 4
2602 User Data_26.LONG_1 None SelectOperate Variation 1 Variation 1
2603 User Data_26.LONG_2 None SelectOperate Variation 1 Variation 1
2604 User Data_26.LONG_3 None SelectOperate Variation 1 Variation 1
2605 User Data_26.LONG_4 None SelectOperate Variation 1 Variation 1
2606 User Data_26.LONG_5 None SelectOperate Variation 1 Variation 1
2607 User Data_26.LONG_6 None SelectOperate Variation 1 Variation 1
2608 User Data_26.LONG_7 None SelectOperate Variation 1 Variation 1
170 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2609 User Data_26.LONG_8 None SelectOperate Variation 1 Variation 1
2610 User Data_26.LONG_9 None SelectOperate Variation 1 Variation 1
2611 User Data_26.LONG_10 None SelectOperate Variation 1 Variation 1
2612 User Data_26.SHORT_1 None SelectOperate Variation 2 Variation 2
2613 User Data_26.SHORT_2 None SelectOperate Variation 2 Variation 2
2614 User Data_26.SHORT_3 None SelectOperate Variation 2 Variation 2
2615 User Data_26.SHORT_4 None SelectOperate Variation 2 Variation 2
2616 User Data_26.SHORT_5 None SelectOperate Variation 2 Variation 2
2617 User Data_26.SHORT_6 None SelectOperate Variation 2 Variation 2
2618 User Data_26.SHORT_7 None SelectOperate Variation 2 Variation 2
2619 User Data_26.SHORT_8 None SelectOperate Variation 2 Variation 2
2620 User Data_26.SHORT_9 None SelectOperate Variation 2 Variation 2
2621 User Data_26.SHORT_10 None SelectOperate Variation 2 Variation 2
2622 User Data_26.BYTE_1 None SelectOperate Variation 2 Variation 2
2623 User Data_26.BYTE_2 None SelectOperate Variation 2 Variation 2
2624 User Data_26.BYTE_3 None SelectOperate Variation 2 Variation 2
2625 User Data_26.BYTE_4 None SelectOperate Variation 2 Variation 2
2626 User Data_26.BYTE_5 None SelectOperate Variation 2 Variation 2
2627 User Data_26.BYTE_6 None SelectOperate Variation 2 Variation 2
2628 User Data_26.BYTE_7 None SelectOperate Variation 2 Variation 2
2629 User Data_26.BYTE_8 None SelectOperate Variation 2 Variation 2
2630 User Data_26.BYTE_9 None SelectOperate Variation 2 Variation 2
2631 User Data_26.BYTE_10 None SelectOperate Variation 2 Variation 2
2632 User Data_27.FLOAT_1 None SelectOperate Variation 3 Variation 3
2633 User Data_27.FLOAT_2 None SelectOperate Variation 3 Variation 3
2634 User Data_27.FLOAT_3 None SelectOperate Variation 3 Variation 3
2635 User Data_27.FLOAT_4 None SelectOperate Variation 3 Variation 3
2636 User Data_27.FLOAT_5 None SelectOperate Variation 3 Variation 3
2637 User Data_27.FLOAT_6 None SelectOperate Variation 3 Variation 3
2638 User Data_27.FLOAT_7 None SelectOperate Variation 3 Variation 3
2639 User Data_27.FLOAT_8 None SelectOperate Variation 3 Variation 3
2640 User Data_27.FLOAT_9 None SelectOperate Variation 3 Variation 3
DNP3 Data Point List 171
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2641 User Data_27.FLOAT_10 None SelectOperate Variation 3 Variation 3
2642 User Data_27.FLOAT_11 None SelectOperate Variation 3 Variation 3
2643 User Data_27.FLOAT_12 None SelectOperate Variation 3 Variation 3
2644 User Data_27.FLOAT_13 None SelectOperate Variation 3 Variation 3
2645 User Data_27.FLOAT_14 None SelectOperate Variation 3 Variation 3
2646 User Data_27.FLOAT_15 None SelectOperate Variation 3 Variation 3
2647 User Data_27.FLOAT_16 None SelectOperate Variation 3 Variation 3
2648 User Data_27.FLOAT_17 None SelectOperate Variation 3 Variation 3
2649 User Data_27.FLOAT_18 None SelectOperate Variation 3 Variation 3
2650 User Data_27.FLOAT_19 None SelectOperate Variation 3 Variation 3
2651 User Data_27.FLOAT_20 None SelectOperate Variation 3 Variation 3
2652 User Data_27.DOUBLE_1 None SelectOperate Variation 4 Variation 4
2653 User Data_27.DOUBLE_2 None SelectOperate Variation 4 Variation 4
2654 User Data_27.DOUBLE_3 None SelectOperate Variation 4 Variation 4
2655 User Data_27.DOUBLE_4 None SelectOperate Variation 4 Variation 4
2656 User Data_27.DOUBLE_5 None SelectOperate Variation 4 Variation 4
2657 User Data_27.DOUBLE_6 None SelectOperate Variation 4 Variation 4
2658 User Data_27.DOUBLE_7 None SelectOperate Variation 4 Variation 4
2659 User Data_27.DOUBLE_8 None SelectOperate Variation 4 Variation 4
2660 User Data_27.DOUBLE_9 None SelectOperate Variation 4 Variation 4
2661 User Data_27.DOUBLE_10 None SelectOperate Variation 4 Variation 4
2662 User Data_27.LONG_1 None SelectOperate Variation 1 Variation 1
2663 User Data_27.LONG_2 None SelectOperate Variation 1 Variation 1
2664 User Data_27.LONG_3 None SelectOperate Variation 1 Variation 1
2665 User Data_27.LONG_4 None SelectOperate Variation 1 Variation 1
2666 User Data_27.LONG_5 None SelectOperate Variation 1 Variation 1
2667 User Data_27.LONG_6 None SelectOperate Variation 1 Variation 1
2668 User Data_27.LONG_7 None SelectOperate Variation 1 Variation 1
2669 User Data_27.LONG_8 None SelectOperate Variation 1 Variation 1
2670 User Data_27.LONG_9 None SelectOperate Variation 1 Variation 1
2671 User Data_27.LONG_10 None SelectOperate Variation 1 Variation 1
2672 User Data_27.SHORT_1 None SelectOperate Variation 2 Variation 2
172 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2673 User Data_27.SHORT_2 None SelectOperate Variation 2 Variation 2
2674 User Data_27.SHORT_3 None SelectOperate Variation 2 Variation 2
2675 User Data_27.SHORT_4 None SelectOperate Variation 2 Variation 2
2676 User Data_27.SHORT_5 None SelectOperate Variation 2 Variation 2
2677 User Data_27.SHORT_6 None SelectOperate Variation 2 Variation 2
2678 User Data_27.SHORT_7 None SelectOperate Variation 2 Variation 2
2679 User Data_27.SHORT_8 None SelectOperate Variation 2 Variation 2
2680 User Data_27.SHORT_9 None SelectOperate Variation 2 Variation 2
2681 User Data_27.SHORT_10 None SelectOperate Variation 2 Variation 2
2682 User Data_27.BYTE_1 None SelectOperate Variation 2 Variation 2
2683 User Data_27.BYTE_2 None SelectOperate Variation 2 Variation 2
2684 User Data_27.BYTE_3 None SelectOperate Variation 2 Variation 2
2685 User Data_27.BYTE_4 None SelectOperate Variation 2 Variation 2
2686 User Data_27.BYTE_5 None SelectOperate Variation 2 Variation 2
2687 User Data_27.BYTE_6 None SelectOperate Variation 2 Variation 2
2688 User Data_27.BYTE_7 None SelectOperate Variation 2 Variation 2
2689 User Data_27.BYTE_8 None SelectOperate Variation 2 Variation 2
2690 User Data_27.BYTE_9 None SelectOperate Variation 2 Variation 2
2691 User Data_27.BYTE_10 None SelectOperate Variation 2 Variation 2
2692 User Data_28.FLOAT_1 None SelectOperate Variation 3 Variation 3
2693 User Data_28.FLOAT_2 None SelectOperate Variation 3 Variation 3
2694 User Data_28.FLOAT_3 None SelectOperate Variation 3 Variation 3
2695 User Data_28.FLOAT_4 None SelectOperate Variation 3 Variation 3
2696 User Data_28.FLOAT_5 None SelectOperate Variation 3 Variation 3
2697 User Data_28.FLOAT_6 None SelectOperate Variation 3 Variation 3
2698 User Data_28.FLOAT_7 None SelectOperate Variation 3 Variation 3
2699 User Data_28.FLOAT_8 None SelectOperate Variation 3 Variation 3
2700 User Data_28.FLOAT_9 None SelectOperate Variation 3 Variation 3
2701 User Data_28.FLOAT_10 None SelectOperate Variation 3 Variation 3
2702 User Data_28.FLOAT_11 None SelectOperate Variation 3 Variation 3
2703 User Data_28.FLOAT_12 None SelectOperate Variation 3 Variation 3
2704 User Data_28.FLOAT_13 None SelectOperate Variation 3 Variation 3
DNP3 Data Point List 173
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2705 User Data_28.FLOAT_14 None SelectOperate Variation 3 Variation 3
2706 User Data_28.FLOAT_15 None SelectOperate Variation 3 Variation 3
2707 User Data_28.FLOAT_16 None SelectOperate Variation 3 Variation 3
2708 User Data_28.FLOAT_17 None SelectOperate Variation 3 Variation 3
2709 User Data_28.FLOAT_18 None SelectOperate Variation 3 Variation 3
2710 User Data_28.FLOAT_19 None SelectOperate Variation 3 Variation 3
2711 User Data_28.FLOAT_20 None SelectOperate Variation 3 Variation 3
2712 User Data_28.DOUBLE_1 None SelectOperate Variation 4 Variation 4
2713 User Data_28.DOUBLE_2 None SelectOperate Variation 4 Variation 4
2714 User Data_28.DOUBLE_3 None SelectOperate Variation 4 Variation 4
2715 User Data_28.DOUBLE_4 None SelectOperate Variation 4 Variation 4
2716 User Data_28.DOUBLE_5 None SelectOperate Variation 4 Variation 4
2717 User Data_28.DOUBLE_6 None SelectOperate Variation 4 Variation 4
2718 User Data_28.DOUBLE_7 None SelectOperate Variation 4 Variation 4
2719 User Data_28.DOUBLE_8 None SelectOperate Variation 4 Variation 4
2720 User Data_28.DOUBLE_9 None SelectOperate Variation 4 Variation 4
2721 User Data_28.DOUBLE_10 None SelectOperate Variation 4 Variation 4
2722 User Data_28.LONG_1 None SelectOperate Variation 1 Variation 1
2723 User Data_28.LONG_2 None SelectOperate Variation 1 Variation 1
2724 User Data_28.LONG_3 None SelectOperate Variation 1 Variation 1
2725 User Data_28.LONG_4 None SelectOperate Variation 1 Variation 1
2726 User Data_28.LONG_5 None SelectOperate Variation 1 Variation 1
2727 User Data_28.LONG_6 None SelectOperate Variation 1 Variation 1
2728 User Data_28.LONG_7 None SelectOperate Variation 1 Variation 1
2729 User Data_28.LONG_8 None SelectOperate Variation 1 Variation 1
2730 User Data_28.LONG_9 None SelectOperate Variation 1 Variation 1
2731 User Data_28.LONG_10 None SelectOperate Variation 1 Variation 1
2732 User Data_28.SHORT_1 None SelectOperate Variation 2 Variation 2
2733 User Data_28.SHORT_2 None SelectOperate Variation 2 Variation 2
2734 User Data_28.SHORT_3 None SelectOperate Variation 2 Variation 2
2735 User Data_28.SHORT_4 None SelectOperate Variation 2 Variation 2
2736 User Data_28.SHORT_5 None SelectOperate Variation 2 Variation 2
174 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2737 User Data_28.SHORT_6 None SelectOperate Variation 2 Variation 2
2738 User Data_28.SHORT_7 None SelectOperate Variation 2 Variation 2
2739 User Data_28.SHORT_8 None SelectOperate Variation 2 Variation 2
2740 User Data_28.SHORT_9 None SelectOperate Variation 2 Variation 2
2741 User Data_28.SHORT_10 None SelectOperate Variation 2 Variation 2
2742 User Data_28.BYTE_1 None SelectOperate Variation 2 Variation 2
2743 User Data_28.BYTE_2 None SelectOperate Variation 2 Variation 2
2744 User Data_28.BYTE_3 None SelectOperate Variation 2 Variation 2
2745 User Data_28.BYTE_4 None SelectOperate Variation 2 Variation 2
2746 User Data_28.BYTE_5 None SelectOperate Variation 2 Variation 2
2747 User Data_28.BYTE_6 None SelectOperate Variation 2 Variation 2
2748 User Data_28.BYTE_7 None SelectOperate Variation 2 Variation 2
2749 User Data_28.BYTE_8 None SelectOperate Variation 2 Variation 2
2750 User Data_28.BYTE_9 None SelectOperate Variation 2 Variation 2
2751 User Data_28.BYTE_10 None SelectOperate Variation 2 Variation 2
2752 User Data_29.FLOAT_1 None SelectOperate Variation 3 Variation 3
2753 User Data_29.FLOAT_2 None SelectOperate Variation 3 Variation 3
2754 User Data_29.FLOAT_3 None SelectOperate Variation 3 Variation 3
2755 User Data_29.FLOAT_4 None SelectOperate Variation 3 Variation 3
2756 User Data_29.FLOAT_5 None SelectOperate Variation 3 Variation 3
2757 User Data_29.FLOAT_6 None SelectOperate Variation 3 Variation 3
2758 User Data_29.FLOAT_7 None SelectOperate Variation 3 Variation 3
2759 User Data_29.FLOAT_8 None SelectOperate Variation 3 Variation 3
2760 User Data_29.FLOAT_9 None SelectOperate Variation 3 Variation 3
2761 User Data_29.FLOAT_10 None SelectOperate Variation 3 Variation 3
2762 User Data_29.FLOAT_11 None SelectOperate Variation 3 Variation 3
2763 User Data_29.FLOAT_12 None SelectOperate Variation 3 Variation 3
2764 User Data_29.FLOAT_13 None SelectOperate Variation 3 Variation 3
2765 User Data_29.FLOAT_14 None SelectOperate Variation 3 Variation 3
2766 User Data_29.FLOAT_15 None SelectOperate Variation 3 Variation 3
2767 User Data_29.FLOAT_16 None SelectOperate Variation 3 Variation 3
2768 User Data_29.FLOAT_17 None SelectOperate Variation 3 Variation 3
DNP3 Data Point List 175
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2769 User Data_29.FLOAT_18 None SelectOperate Variation 3 Variation 3
2770 User Data_29.FLOAT_19 None SelectOperate Variation 3 Variation 3
2771 User Data_29.FLOAT_20 None SelectOperate Variation 3 Variation 3
2772 User Data_29.DOUBLE_1 None SelectOperate Variation 4 Variation 4
2773 User Data_29.DOUBLE_2 None SelectOperate Variation 4 Variation 4
2774 User Data_29.DOUBLE_3 None SelectOperate Variation 4 Variation 4
2775 User Data_29.DOUBLE_4 None SelectOperate Variation 4 Variation 4
2776 User Data_29.DOUBLE_5 None SelectOperate Variation 4 Variation 4
2777 User Data_29.DOUBLE_6 None SelectOperate Variation 4 Variation 4
2778 User Data_29.DOUBLE_7 None SelectOperate Variation 4 Variation 4
2779 User Data_29.DOUBLE_8 None SelectOperate Variation 4 Variation 4
2780 User Data_29.DOUBLE_9 None SelectOperate Variation 4 Variation 4
2781 User Data_29.DOUBLE_10 None SelectOperate Variation 4 Variation 4
2782 User Data_29.LONG_1 None SelectOperate Variation 1 Variation 1
2783 User Data_29.LONG_2 None SelectOperate Variation 1 Variation 1
2784 User Data_29.LONG_3 None SelectOperate Variation 1 Variation 1
2785 User Data_29.LONG_4 None SelectOperate Variation 1 Variation 1
2786 User Data_29.LONG_5 None SelectOperate Variation 1 Variation 1
2787 User Data_29.LONG_6 None SelectOperate Variation 1 Variation 1
2788 User Data_29.LONG_7 None SelectOperate Variation 1 Variation 1
2789 User Data_29.LONG_8 None SelectOperate Variation 1 Variation 1
2790 User Data_29.LONG_9 None SelectOperate Variation 1 Variation 1
2791 User Data_29.LONG_10 None SelectOperate Variation 1 Variation 1
2792 User Data_29.SHORT_1 None SelectOperate Variation 2 Variation 2
2793 User Data_29.SHORT_2 None SelectOperate Variation 2 Variation 2
2794 User Data_29.SHORT_3 None SelectOperate Variation 2 Variation 2
2795 User Data_29.SHORT_4 None SelectOperate Variation 2 Variation 2
2796 User Data_29.SHORT_5 None SelectOperate Variation 2 Variation 2
2797 User Data_29.SHORT_6 None SelectOperate Variation 2 Variation 2
2798 User Data_29.SHORT_7 None SelectOperate Variation 2 Variation 2
2799 User Data_29.SHORT_8 None SelectOperate Variation 2 Variation 2
2800 User Data_29.SHORT_9 None SelectOperate Variation 2 Variation 2
176 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2801 User Data_29.SHORT_10 None SelectOperate Variation 2 Variation 2
2802 User Data_29.BYTE_1 None SelectOperate Variation 2 Variation 2
2803 User Data_29.BYTE_2 None SelectOperate Variation 2 Variation 2
2804 User Data_29.BYTE_3 None SelectOperate Variation 2 Variation 2
2805 User Data_29.BYTE_4 None SelectOperate Variation 2 Variation 2
2806 User Data_29.BYTE_5 None SelectOperate Variation 2 Variation 2
2807 User Data_29.BYTE_6 None SelectOperate Variation 2 Variation 2
2808 User Data_29.BYTE_7 None SelectOperate Variation 2 Variation 2
2809 User Data_29.BYTE_8 None SelectOperate Variation 2 Variation 2
2810 User Data_29.BYTE_9 None SelectOperate Variation 2 Variation 2
2811 User Data_29.BYTE_10 None SelectOperate Variation 2 Variation 2
2812 User Data_30.FLOAT_1 None SelectOperate Variation 3 Variation 3
2813 User Data_30.FLOAT_2 None SelectOperate Variation 3 Variation 3
2814 User Data_30.FLOAT_3 None SelectOperate Variation 3 Variation 3
2815 User Data_30.FLOAT_4 None SelectOperate Variation 3 Variation 3
2816 User Data_30.FLOAT_5 None SelectOperate Variation 3 Variation 3
2817 User Data_30.FLOAT_6 None SelectOperate Variation 3 Variation 3
2818 User Data_30.FLOAT_7 None SelectOperate Variation 3 Variation 3
2819 User Data_30.FLOAT_8 None SelectOperate Variation 3 Variation 3
2820 User Data_30.FLOAT_9 None SelectOperate Variation 3 Variation 3
2821 User Data_30.FLOAT_10 None SelectOperate Variation 3 Variation 3
2822 User Data_30.FLOAT_11 None SelectOperate Variation 3 Variation 3
2823 User Data_30.FLOAT_12 None SelectOperate Variation 3 Variation 3
2824 User Data_30.FLOAT_13 None SelectOperate Variation 3 Variation 3
2825 User Data_30.FLOAT_14 None SelectOperate Variation 3 Variation 3
2826 User Data_30.FLOAT_15 None SelectOperate Variation 3 Variation 3
2827 User Data_30.FLOAT_16 None SelectOperate Variation 3 Variation 3
2828 User Data_30.FLOAT_17 None SelectOperate Variation 3 Variation 3
2829 User Data_30.FLOAT_18 None SelectOperate Variation 3 Variation 3
2830 User Data_30.FLOAT_19 None SelectOperate Variation 3 Variation 3
2831 User Data_30.FLOAT_20 None SelectOperate Variation 3 Variation 3
2832 User Data_30.DOUBLE_1 None SelectOperate Variation 4 Variation 4
DNP3 Data Point List 177
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2833 User Data_30.DOUBLE_2 None SelectOperate Variation 4 Variation 4
2834 User Data_30.DOUBLE_3 None SelectOperate Variation 4 Variation 4
2835 User Data_30.DOUBLE_4 None SelectOperate Variation 4 Variation 4
2836 User Data_30.DOUBLE_5 None SelectOperate Variation 4 Variation 4
2837 User Data_30.DOUBLE_6 None SelectOperate Variation 4 Variation 4
2838 User Data_30.DOUBLE_7 None SelectOperate Variation 4 Variation 4
2839 User Data_30.DOUBLE_8 None SelectOperate Variation 4 Variation 4
2840 User Data_30.DOUBLE_9 None SelectOperate Variation 4 Variation 4
2841 User Data_30.DOUBLE_10 None SelectOperate Variation 4 Variation 4
2842 User Data_30.LONG_1 None SelectOperate Variation 1 Variation 1
2843 User Data_30.LONG_2 None SelectOperate Variation 1 Variation 1
2844 User Data_30.LONG_3 None SelectOperate Variation 1 Variation 1
2845 User Data_30.LONG_4 None SelectOperate Variation 1 Variation 1
2846 User Data_30.LONG_5 None SelectOperate Variation 1 Variation 1
2847 User Data_30.LONG_6 None SelectOperate Variation 1 Variation 1
2848 User Data_30.LONG_7 None SelectOperate Variation 1 Variation 1
2849 User Data_30.LONG_8 None SelectOperate Variation 1 Variation 1
2850 User Data_30.LONG_9 None SelectOperate Variation 1 Variation 1
2851 User Data_30.LONG_10 None SelectOperate Variation 1 Variation 1
2852 User Data_30.SHORT_1 None SelectOperate Variation 2 Variation 2
2853 User Data_30.SHORT_2 None SelectOperate Variation 2 Variation 2
2854 User Data_30.SHORT_3 None SelectOperate Variation 2 Variation 2
2855 User Data_30.SHORT_4 None SelectOperate Variation 2 Variation 2
2856 User Data_30.SHORT_5 None SelectOperate Variation 2 Variation 2
2857 User Data_30.SHORT_6 None SelectOperate Variation 2 Variation 2
2858 User Data_30.SHORT_7 None SelectOperate Variation 2 Variation 2
2859 User Data_30.SHORT_8 None SelectOperate Variation 2 Variation 2
2860 User Data_30.SHORT_9 None SelectOperate Variation 2 Variation 2
2861 User Data_30.SHORT_10 None SelectOperate Variation 2 Variation 2
2862 User Data_30.BYTE_1 None SelectOperate Variation 2 Variation 2
2863 User Data_30.BYTE_2 None SelectOperate Variation 2 Variation 2
2864 User Data_30.BYTE_3 None SelectOperate Variation 2 Variation 2
178 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2865 User Data_30.BYTE_4 None SelectOperate Variation 2 Variation 2
2866 User Data_30.BYTE_5 None SelectOperate Variation 2 Variation 2
2867 User Data_30.BYTE_6 None SelectOperate Variation 2 Variation 2
2868 User Data_30.BYTE_7 None SelectOperate Variation 2 Variation 2
2869 User Data_30.BYTE_8 None SelectOperate Variation 2 Variation 2
2870 User Data_30.BYTE_9 None SelectOperate Variation 2 Variation 2
2871 User Data_30.BYTE_10 None SelectOperate Variation 2 Variation 2
2872 User Data_31.FLOAT_1 None SelectOperate Variation 3 Variation 3
2873 User Data_31.FLOAT_2 None SelectOperate Variation 3 Variation 3
2874 User Data_31.FLOAT_3 None SelectOperate Variation 3 Variation 3
2875 User Data_31.FLOAT_4 None SelectOperate Variation 3 Variation 3
2876 User Data_31.FLOAT_5 None SelectOperate Variation 3 Variation 3
2877 User Data_31.FLOAT_6 None SelectOperate Variation 3 Variation 3
2878 User Data_31.FLOAT_7 None SelectOperate Variation 3 Variation 3
2879 User Data_31.FLOAT_8 None SelectOperate Variation 3 Variation 3
2880 User Data_31.FLOAT_9 None SelectOperate Variation 3 Variation 3
2881 User Data_31.FLOAT_10 None SelectOperate Variation 3 Variation 3
2882 User Data_31.FLOAT_11 None SelectOperate Variation 3 Variation 3
2883 User Data_31.FLOAT_12 None SelectOperate Variation 3 Variation 3
2884 User Data_31.FLOAT_13 None SelectOperate Variation 3 Variation 3
2885 User Data_31.FLOAT_14 None SelectOperate Variation 3 Variation 3
2886 User Data_31.FLOAT_15 None SelectOperate Variation 3 Variation 3
2887 User Data_31.FLOAT_16 None SelectOperate Variation 3 Variation 3
2888 User Data_31.FLOAT_17 None SelectOperate Variation 3 Variation 3
2889 User Data_31.FLOAT_18 None SelectOperate Variation 3 Variation 3
2890 User Data_31.FLOAT_19 None SelectOperate Variation 3 Variation 3
2891 User Data_31.FLOAT_20 None SelectOperate Variation 3 Variation 3
2892 User Data_31.DOUBLE_1 None SelectOperate Variation 4 Variation 4
2893 User Data_31.DOUBLE_2 None SelectOperate Variation 4 Variation 4
2894 User Data_31.DOUBLE_3 None SelectOperate Variation 4 Variation 4
2895 User Data_31.DOUBLE_4 None SelectOperate Variation 4 Variation 4
2896 User Data_31.DOUBLE_5 None SelectOperate Variation 4 Variation 4
DNP3 Data Point List 179
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2897 User Data_31.DOUBLE_6 None SelectOperate Variation 4 Variation 4
2898 User Data_31.DOUBLE_7 None SelectOperate Variation 4 Variation 4
2899 User Data_31.DOUBLE_8 None SelectOperate Variation 4 Variation 4
2900 User Data_31.DOUBLE_9 None SelectOperate Variation 4 Variation 4
2901 User Data_31.DOUBLE_10 None SelectOperate Variation 4 Variation 4
2902 User Data_31.LONG_1 None SelectOperate Variation 1 Variation 1
2903 User Data_31.LONG_2 None SelectOperate Variation 1 Variation 1
2904 User Data_31.LONG_3 None SelectOperate Variation 1 Variation 1
2905 User Data_31.LONG_4 None SelectOperate Variation 1 Variation 1
2906 User Data_31.LONG_5 None SelectOperate Variation 1 Variation 1
2907 User Data_31.LONG_6 None SelectOperate Variation 1 Variation 1
2908 User Data_31.LONG_7 None SelectOperate Variation 1 Variation 1
2909 User Data_31.LONG_8 None SelectOperate Variation 1 Variation 1
2910 User Data_31.LONG_9 None SelectOperate Variation 1 Variation 1
2911 User Data_31.LONG_10 None SelectOperate Variation 1 Variation 1
2912 User Data_31.SHORT_1 None SelectOperate Variation 2 Variation 2
2913 User Data_31.SHORT_2 None SelectOperate Variation 2 Variation 2
2914 User Data_31.SHORT_3 None SelectOperate Variation 2 Variation 2
2915 User Data_31.SHORT_4 None SelectOperate Variation 2 Variation 2
2916 User Data_31.SHORT_5 None SelectOperate Variation 2 Variation 2
2917 User Data_31.SHORT_6 None SelectOperate Variation 2 Variation 2
2918 User Data_31.SHORT_7 None SelectOperate Variation 2 Variation 2
2919 User Data_31.SHORT_8 None SelectOperate Variation 2 Variation 2
2920 User Data_31.SHORT_9 None SelectOperate Variation 2 Variation 2
2921 User Data_31.SHORT_10 None SelectOperate Variation 2 Variation 2
2922 User Data_31.BYTE_1 None SelectOperate Variation 2 Variation 2
2923 User Data_31.BYTE_2 None SelectOperate Variation 2 Variation 2
2924 User Data_31.BYTE_3 None SelectOperate Variation 2 Variation 2
2925 User Data_31.BYTE_4 None SelectOperate Variation 2 Variation 2
2926 User Data_31.BYTE_5 None SelectOperate Variation 2 Variation 2
2927 User Data_31.BYTE_6 None SelectOperate Variation 2 Variation 2
2928 User Data_31.BYTE_7 None SelectOperate Variation 2 Variation 2
180 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2929 User Data_31.BYTE_8 None SelectOperate Variation 2 Variation 2
2930 User Data_31.BYTE_9 None SelectOperate Variation 2 Variation 2
2931 User Data_31.BYTE_10 None SelectOperate Variation 2 Variation 2
2932 User Data_32.FLOAT_1 None SelectOperate Variation 3 Variation 3
2933 User Data_32.FLOAT_2 None SelectOperate Variation 3 Variation 3
2934 User Data_32.FLOAT_3 None SelectOperate Variation 3 Variation 3
2935 User Data_32.FLOAT_4 None SelectOperate Variation 3 Variation 3
2936 User Data_32.FLOAT_5 None SelectOperate Variation 3 Variation 3
2937 User Data_32.FLOAT_6 None SelectOperate Variation 3 Variation 3
2938 User Data_32.FLOAT_7 None SelectOperate Variation 3 Variation 3
2939 User Data_32.FLOAT_8 None SelectOperate Variation 3 Variation 3
2940 User Data_32.FLOAT_9 None SelectOperate Variation 3 Variation 3
2941 User Data_32.FLOAT_10 None SelectOperate Variation 3 Variation 3
2942 User Data_32.FLOAT_11 None SelectOperate Variation 3 Variation 3
2943 User Data_32.FLOAT_12 None SelectOperate Variation 3 Variation 3
2944 User Data_32.FLOAT_13 None SelectOperate Variation 3 Variation 3
2945 User Data_32.FLOAT_14 None SelectOperate Variation 3 Variation 3
2946 User Data_32.FLOAT_15 None SelectOperate Variation 3 Variation 3
2947 User Data_32.FLOAT_16 None SelectOperate Variation 3 Variation 3
2948 User Data_32.FLOAT_17 None SelectOperate Variation 3 Variation 3
2949 User Data_32.FLOAT_18 None SelectOperate Variation 3 Variation 3
2950 User Data_32.FLOAT_19 None SelectOperate Variation 3 Variation 3
2951 User Data_32.FLOAT_20 None SelectOperate Variation 3 Variation 3
2952 User Data_32.DOUBLE_1 None SelectOperate Variation 4 Variation 4
2953 User Data_32.DOUBLE_2 None SelectOperate Variation 4 Variation 4
2954 User Data_32.DOUBLE_3 None SelectOperate Variation 4 Variation 4
2955 User Data_32.DOUBLE_4 None SelectOperate Variation 4 Variation 4
2956 User Data_32.DOUBLE_5 None SelectOperate Variation 4 Variation 4
2957 User Data_32.DOUBLE_6 None SelectOperate Variation 4 Variation 4
2958 User Data_32.DOUBLE_7 None SelectOperate Variation 4 Variation 4
2959 User Data_32.DOUBLE_8 None SelectOperate Variation 4 Variation 4
2960 User Data_32.DOUBLE_9 None SelectOperate Variation 4 Variation 4
DNP3 Data Point List 181
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2961 User Data_32.DOUBLE_10 None SelectOperate Variation 4 Variation 4
2962 User Data_32.LONG_1 None SelectOperate Variation 1 Variation 1
2963 User Data_32.LONG_2 None SelectOperate Variation 1 Variation 1
2964 User Data_32.LONG_3 None SelectOperate Variation 1 Variation 1
2965 User Data_32.LONG_4 None SelectOperate Variation 1 Variation 1
2966 User Data_32.LONG_5 None SelectOperate Variation 1 Variation 1
2967 User Data_32.LONG_6 None SelectOperate Variation 1 Variation 1
2968 User Data_32.LONG_7 None SelectOperate Variation 1 Variation 1
2969 User Data_32.LONG_8 None SelectOperate Variation 1 Variation 1
2970 User Data_32.LONG_9 None SelectOperate Variation 1 Variation 1
2971 User Data_32.LONG_10 None SelectOperate Variation 1 Variation 1
2972 User Data_32.SHORT_1 None SelectOperate Variation 2 Variation 2
2973 User Data_32.SHORT_2 None SelectOperate Variation 2 Variation 2
2974 User Data_32.SHORT_3 None SelectOperate Variation 2 Variation 2
2975 User Data_32.SHORT_4 None SelectOperate Variation 2 Variation 2
2976 User Data_32.SHORT_5 None SelectOperate Variation 2 Variation 2
2977 User Data_32.SHORT_6 None SelectOperate Variation 2 Variation 2
2978 User Data_32.SHORT_7 None SelectOperate Variation 2 Variation 2
2979 User Data_32.SHORT_8 None SelectOperate Variation 2 Variation 2
2980 User Data_32.SHORT_9 None SelectOperate Variation 2 Variation 2
2981 User Data_32.SHORT_10 None SelectOperate Variation 2 Variation 2
2982 User Data_32.BYTE_1 None SelectOperate Variation 2 Variation 2
2983 User Data_32.BYTE_2 None SelectOperate Variation 2 Variation 2
2984 User Data_32.BYTE_3 None SelectOperate Variation 2 Variation 2
2985 User Data_32.BYTE_4 None SelectOperate Variation 2 Variation 2
2986 User Data_32.BYTE_5 None SelectOperate Variation 2 Variation 2
2987 User Data_32.BYTE_6 None SelectOperate Variation 2 Variation 2
2988 User Data_32.BYTE_7 None SelectOperate Variation 2 Variation 2
2989 User Data_32.BYTE_8 None SelectOperate Variation 2 Variation 2
2990 User Data_32.BYTE_9 None SelectOperate Variation 2 Variation 2
2991 User Data_32.BYTE_10 None SelectOperate Variation 2 Variation 2
2992 User Data_33.FLOAT_1 None SelectOperate Variation 3 Variation 3
182 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
2993 User Data_33.FLOAT_2 None SelectOperate Variation 3 Variation 3
2994 User Data_33.FLOAT_3 None SelectOperate Variation 3 Variation 3
2995 User Data_33.FLOAT_4 None SelectOperate Variation 3 Variation 3
2996 User Data_33.FLOAT_5 None SelectOperate Variation 3 Variation 3
2997 User Data_33.FLOAT_6 None SelectOperate Variation 3 Variation 3
2998 User Data_33.FLOAT_7 None SelectOperate Variation 3 Variation 3
2999 User Data_33.FLOAT_8 None SelectOperate Variation 3 Variation 3
3000 User Data_33.FLOAT_9 None SelectOperate Variation 3 Variation 3
3001 User Data_33.FLOAT_10 None SelectOperate Variation 3 Variation 3
3002 User Data_33.FLOAT_11 None SelectOperate Variation 3 Variation 3
3003 User Data_33.FLOAT_12 None SelectOperate Variation 3 Variation 3
3004 User Data_33.FLOAT_13 None SelectOperate Variation 3 Variation 3
3005 User Data_33.FLOAT_14 None SelectOperate Variation 3 Variation 3
3006 User Data_33.FLOAT_15 None SelectOperate Variation 3 Variation 3
3007 User Data_33.FLOAT_16 None SelectOperate Variation 3 Variation 3
3008 User Data_33.FLOAT_17 None SelectOperate Variation 3 Variation 3
3009 User Data_33.FLOAT_18 None SelectOperate Variation 3 Variation 3
3010 User Data_33.FLOAT_19 None SelectOperate Variation 3 Variation 3
3011 User Data_33.FLOAT_20 None SelectOperate Variation 3 Variation 3
3012 User Data_33.DOUBLE_1 None SelectOperate Variation 4 Variation 4
3013 User Data_33.DOUBLE_2 None SelectOperate Variation 4 Variation 4
3014 User Data_33.DOUBLE_3 None SelectOperate Variation 4 Variation 4
3015 User Data_33.DOUBLE_4 None SelectOperate Variation 4 Variation 4
3016 User Data_33.DOUBLE_5 None SelectOperate Variation 4 Variation 4
3017 User Data_33.DOUBLE_6 None SelectOperate Variation 4 Variation 4
3018 User Data_33.DOUBLE_7 None SelectOperate Variation 4 Variation 4
3019 User Data_33.DOUBLE_8 None SelectOperate Variation 4 Variation 4
3020 User Data_33.DOUBLE_9 None SelectOperate Variation 4 Variation 4
3021 User Data_33.DOUBLE_10 None SelectOperate Variation 4 Variation 4
3022 User Data_33.LONG_1 None SelectOperate Variation 1 Variation 1
3023 User Data_33.LONG_2 None SelectOperate Variation 1 Variation 1
3024 User Data_33.LONG_3 None SelectOperate Variation 1 Variation 1
DNP3 Data Point List 183
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3025 User Data_33.LONG_4 None SelectOperate Variation 1 Variation 1
3026 User Data_33.LONG_5 None SelectOperate Variation 1 Variation 1
3027 User Data_33.LONG_6 None SelectOperate Variation 1 Variation 1
3028 User Data_33.LONG_7 None SelectOperate Variation 1 Variation 1
3029 User Data_33.LONG_8 None SelectOperate Variation 1 Variation 1
3030 User Data_33.LONG_9 None SelectOperate Variation 1 Variation 1
3031 User Data_33.LONG_10 None SelectOperate Variation 1 Variation 1
3032 User Data_33.SHORT_1 None SelectOperate Variation 2 Variation 2
3033 User Data_33.SHORT_2 None SelectOperate Variation 2 Variation 2
3034 User Data_33.SHORT_3 None SelectOperate Variation 2 Variation 2
3035 User Data_33.SHORT_4 None SelectOperate Variation 2 Variation 2
3036 User Data_33.SHORT_5 None SelectOperate Variation 2 Variation 2
3037 User Data_33.SHORT_6 None SelectOperate Variation 2 Variation 2
3038 User Data_33.SHORT_7 None SelectOperate Variation 2 Variation 2
3039 User Data_33.SHORT_8 None SelectOperate Variation 2 Variation 2
3040 User Data_33.SHORT_9 None SelectOperate Variation 2 Variation 2
3041 User Data_33.SHORT_10 None SelectOperate Variation 2 Variation 2
3042 User Data_33.BYTE_1 None SelectOperate Variation 2 Variation 2
3043 User Data_33.BYTE_2 None SelectOperate Variation 2 Variation 2
3044 User Data_33.BYTE_3 None SelectOperate Variation 2 Variation 2
3045 User Data_33.BYTE_4 None SelectOperate Variation 2 Variation 2
3046 User Data_33.BYTE_5 None SelectOperate Variation 2 Variation 2
3047 User Data_33.BYTE_6 None SelectOperate Variation 2 Variation 2
3048 User Data_33.BYTE_7 None SelectOperate Variation 2 Variation 2
3049 User Data_33.BYTE_8 None SelectOperate Variation 2 Variation 2
3050 User Data_33.BYTE_9 None SelectOperate Variation 2 Variation 2
3051 User Data_33.BYTE_10 None SelectOperate Variation 2 Variation 2
3052 User Data_34.FLOAT_1 None SelectOperate Variation 3 Variation 3
3053 User Data_34.FLOAT_2 None SelectOperate Variation 3 Variation 3
3054 User Data_34.FLOAT_3 None SelectOperate Variation 3 Variation 3
3055 User Data_34.FLOAT_4 None SelectOperate Variation 3 Variation 3
3056 User Data_34.FLOAT_5 None SelectOperate Variation 3 Variation 3
184 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3057 User Data_34.FLOAT_6 None SelectOperate Variation 3 Variation 3
3058 User Data_34.FLOAT_7 None SelectOperate Variation 3 Variation 3
3059 User Data_34.FLOAT_8 None SelectOperate Variation 3 Variation 3
3060 User Data_34.FLOAT_9 None SelectOperate Variation 3 Variation 3
3061 User Data_34.FLOAT_10 None SelectOperate Variation 3 Variation 3
3062 User Data_34.FLOAT_11 None SelectOperate Variation 3 Variation 3
3063 User Data_34.FLOAT_12 None SelectOperate Variation 3 Variation 3
3064 User Data_34.FLOAT_13 None SelectOperate Variation 3 Variation 3
3065 User Data_34.FLOAT_14 None SelectOperate Variation 3 Variation 3
3066 User Data_34.FLOAT_15 None SelectOperate Variation 3 Variation 3
3067 User Data_34.FLOAT_16 None SelectOperate Variation 3 Variation 3
3068 User Data_34.FLOAT_17 None SelectOperate Variation 3 Variation 3
3069 User Data_34.FLOAT_18 None SelectOperate Variation 3 Variation 3
3070 User Data_34.FLOAT_19 None SelectOperate Variation 3 Variation 3
3071 User Data_34.FLOAT_20 None SelectOperate Variation 3 Variation 3
3072 User Data_34.DOUBLE_1 None SelectOperate Variation 4 Variation 4
3073 User Data_34.DOUBLE_2 None SelectOperate Variation 4 Variation 4
3074 User Data_34.DOUBLE_3 None SelectOperate Variation 4 Variation 4
3075 User Data_34.DOUBLE_4 None SelectOperate Variation 4 Variation 4
3076 User Data_34.DOUBLE_5 None SelectOperate Variation 4 Variation 4
3077 User Data_34.DOUBLE_6 None SelectOperate Variation 4 Variation 4
3078 User Data_34.DOUBLE_7 None SelectOperate Variation 4 Variation 4
3079 User Data_34.DOUBLE_8 None SelectOperate Variation 4 Variation 4
3080 User Data_34.DOUBLE_9 None SelectOperate Variation 4 Variation 4
3081 User Data_34.DOUBLE_10 None SelectOperate Variation 4 Variation 4
3082 User Data_34.LONG_1 None SelectOperate Variation 1 Variation 1
3083 User Data_34.LONG_2 None SelectOperate Variation 1 Variation 1
3084 User Data_34.LONG_3 None SelectOperate Variation 1 Variation 1
3085 User Data_34.LONG_4 None SelectOperate Variation 1 Variation 1
3086 User Data_34.LONG_5 None SelectOperate Variation 1 Variation 1
3087 User Data_34.LONG_6 None SelectOperate Variation 1 Variation 1
3088 User Data_34.LONG_7 None SelectOperate Variation 1 Variation 1
DNP3 Data Point List 185
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3089 User Data_34.LONG_8 None SelectOperate Variation 1 Variation 1
3090 User Data_34.LONG_9 None SelectOperate Variation 1 Variation 1
3091 User Data_34.LONG_10 None SelectOperate Variation 1 Variation 1
3092 User Data_34.SHORT_1 None SelectOperate Variation 2 Variation 2
3093 User Data_34.SHORT_2 None SelectOperate Variation 2 Variation 2
3094 User Data_34.SHORT_3 None SelectOperate Variation 2 Variation 2
3095 User Data_34.SHORT_4 None SelectOperate Variation 2 Variation 2
3096 User Data_34.SHORT_5 None SelectOperate Variation 2 Variation 2
3097 User Data_34.SHORT_6 None SelectOperate Variation 2 Variation 2
3098 User Data_34.SHORT_7 None SelectOperate Variation 2 Variation 2
3099 User Data_34.SHORT_8 None SelectOperate Variation 2 Variation 2
3100 User Data_34.SHORT_9 None SelectOperate Variation 2 Variation 2
3101 User Data_34.SHORT_10 None SelectOperate Variation 2 Variation 2
3102 User Data_34.BYTE_1 None SelectOperate Variation 2 Variation 2
3103 User Data_34.BYTE_2 None SelectOperate Variation 2 Variation 2
3104 User Data_34.BYTE_3 None SelectOperate Variation 2 Variation 2
3105 User Data_34.BYTE_4 None SelectOperate Variation 2 Variation 2
3106 User Data_34.BYTE_5 None SelectOperate Variation 2 Variation 2
3107 User Data_34.BYTE_6 None SelectOperate Variation 2 Variation 2
3108 User Data_34.BYTE_7 None SelectOperate Variation 2 Variation 2
3109 User Data_34.BYTE_8 None SelectOperate Variation 2 Variation 2
3110 User Data_34.BYTE_9 None SelectOperate Variation 2 Variation 2
3111 User Data_34.BYTE_10 None SelectOperate Variation 2 Variation 2
3112 User Data_35.FLOAT_1 None SelectOperate Variation 3 Variation 3
3113 User Data_35.FLOAT_2 None SelectOperate Variation 3 Variation 3
3114 User Data_35.FLOAT_3 None SelectOperate Variation 3 Variation 3
3115 User Data_35.FLOAT_4 None SelectOperate Variation 3 Variation 3
3116 User Data_35.FLOAT_5 None SelectOperate Variation 3 Variation 3
3117 User Data_35.FLOAT_6 None SelectOperate Variation 3 Variation 3
3118 User Data_35.FLOAT_7 None SelectOperate Variation 3 Variation 3
3119 User Data_35.FLOAT_8 None SelectOperate Variation 3 Variation 3
3120 User Data_35.FLOAT_9 None SelectOperate Variation 3 Variation 3
186 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3121 User Data_35.FLOAT_10 None SelectOperate Variation 3 Variation 3
3122 User Data_35.FLOAT_11 None SelectOperate Variation 3 Variation 3
3123 User Data_35.FLOAT_12 None SelectOperate Variation 3 Variation 3
3124 User Data_35.FLOAT_13 None SelectOperate Variation 3 Variation 3
3125 User Data_35.FLOAT_14 None SelectOperate Variation 3 Variation 3
3126 User Data_35.FLOAT_15 None SelectOperate Variation 3 Variation 3
3127 User Data_35.FLOAT_16 None SelectOperate Variation 3 Variation 3
3128 User Data_35.FLOAT_17 None SelectOperate Variation 3 Variation 3
3129 User Data_35.FLOAT_18 None SelectOperate Variation 3 Variation 3
3130 User Data_35.FLOAT_19 None SelectOperate Variation 3 Variation 3
3131 User Data_35.FLOAT_20 None SelectOperate Variation 3 Variation 3
3132 User Data_35.DOUBLE_1 None SelectOperate Variation 4 Variation 4
3133 User Data_35.DOUBLE_2 None SelectOperate Variation 4 Variation 4
3134 User Data_35.DOUBLE_3 None SelectOperate Variation 4 Variation 4
3135 User Data_35.DOUBLE_4 None SelectOperate Variation 4 Variation 4
3136 User Data_35.DOUBLE_5 None SelectOperate Variation 4 Variation 4
3137 User Data_35.DOUBLE_6 None SelectOperate Variation 4 Variation 4
3138 User Data_35.DOUBLE_7 None SelectOperate Variation 4 Variation 4
3139 User Data_35.DOUBLE_8 None SelectOperate Variation 4 Variation 4
3140 User Data_35.DOUBLE_9 None SelectOperate Variation 4 Variation 4
3141 User Data_35.DOUBLE_10 None SelectOperate Variation 4 Variation 4
3142 User Data_35.LONG_1 None SelectOperate Variation 1 Variation 1
3143 User Data_35.LONG_2 None SelectOperate Variation 1 Variation 1
3144 User Data_35.LONG_3 None SelectOperate Variation 1 Variation 1
3145 User Data_35.LONG_4 None SelectOperate Variation 1 Variation 1
3146 User Data_35.LONG_5 None SelectOperate Variation 1 Variation 1
3147 User Data_35.LONG_6 None SelectOperate Variation 1 Variation 1
3148 User Data_35.LONG_7 None SelectOperate Variation 1 Variation 1
3149 User Data_35.LONG_8 None SelectOperate Variation 1 Variation 1
3150 User Data_35.LONG_9 None SelectOperate Variation 1 Variation 1
3151 User Data_35.LONG_10 None SelectOperate Variation 1 Variation 1
3152 User Data_35.SHORT_1 None SelectOperate Variation 2 Variation 2
DNP3 Data Point List 187
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3153 User Data_35.SHORT_2 None SelectOperate Variation 2 Variation 2
3154 User Data_35.SHORT_3 None SelectOperate Variation 2 Variation 2
3155 User Data_35.SHORT_4 None SelectOperate Variation 2 Variation 2
3156 User Data_35.SHORT_5 None SelectOperate Variation 2 Variation 2
3157 User Data_35.SHORT_6 None SelectOperate Variation 2 Variation 2
3158 User Data_35.SHORT_7 None SelectOperate Variation 2 Variation 2
3159 User Data_35.SHORT_8 None SelectOperate Variation 2 Variation 2
3160 User Data_35.SHORT_9 None SelectOperate Variation 2 Variation 2
3161 User Data_35.SHORT_10 None SelectOperate Variation 2 Variation 2
3162 User Data_35.BYTE_1 None SelectOperate Variation 2 Variation 2
3163 User Data_35.BYTE_2 None SelectOperate Variation 2 Variation 2
3164 User Data_35.BYTE_3 None SelectOperate Variation 2 Variation 2
3165 User Data_35.BYTE_4 None SelectOperate Variation 2 Variation 2
3166 User Data_35.BYTE_5 None SelectOperate Variation 2 Variation 2
3167 User Data_35.BYTE_6 None SelectOperate Variation 2 Variation 2
3168 User Data_35.BYTE_7 None SelectOperate Variation 2 Variation 2
3169 User Data_35.BYTE_8 None SelectOperate Variation 2 Variation 2
3170 User Data_35.BYTE_9 None SelectOperate Variation 2 Variation 2
3171 User Data_35.BYTE_10 None SelectOperate Variation 2 Variation 2
3172 User Data_36.FLOAT_1 None SelectOperate Variation 3 Variation 3
3173 User Data_36.FLOAT_2 None SelectOperate Variation 3 Variation 3
3174 User Data_36.FLOAT_3 None SelectOperate Variation 3 Variation 3
3175 User Data_36.FLOAT_4 None SelectOperate Variation 3 Variation 3
3176 User Data_36.FLOAT_5 None SelectOperate Variation 3 Variation 3
3177 User Data_36.FLOAT_6 None SelectOperate Variation 3 Variation 3
3178 User Data_36.FLOAT_7 None SelectOperate Variation 3 Variation 3
3179 User Data_36.FLOAT_8 None SelectOperate Variation 3 Variation 3
3180 User Data_36.FLOAT_9 None SelectOperate Variation 3 Variation 3
3181 User Data_36.FLOAT_10 None SelectOperate Variation 3 Variation 3
3182 User Data_36.FLOAT_11 None SelectOperate Variation 3 Variation 3
3183 User Data_36.FLOAT_12 None SelectOperate Variation 3 Variation 3
3184 User Data_36.FLOAT_13 None SelectOperate Variation 3 Variation 3
188 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3185 User Data_36.FLOAT_14 None SelectOperate Variation 3 Variation 3
3186 User Data_36.FLOAT_15 None SelectOperate Variation 3 Variation 3
3187 User Data_36.FLOAT_16 None SelectOperate Variation 3 Variation 3
3188 User Data_36.FLOAT_17 None SelectOperate Variation 3 Variation 3
3189 User Data_36.FLOAT_18 None SelectOperate Variation 3 Variation 3
3190 User Data_36.FLOAT_19 None SelectOperate Variation 3 Variation 3
3191 User Data_36.FLOAT_20 None SelectOperate Variation 3 Variation 3
3192 User Data_36.DOUBLE_1 None SelectOperate Variation 4 Variation 4
3193 User Data_36.DOUBLE_2 None SelectOperate Variation 4 Variation 4
3194 User Data_36.DOUBLE_3 None SelectOperate Variation 4 Variation 4
3195 User Data_36.DOUBLE_4 None SelectOperate Variation 4 Variation 4
3196 User Data_36.DOUBLE_5 None SelectOperate Variation 4 Variation 4
3197 User Data_36.DOUBLE_6 None SelectOperate Variation 4 Variation 4
3198 User Data_36.DOUBLE_7 None SelectOperate Variation 4 Variation 4
3199 User Data_36.DOUBLE_8 None SelectOperate Variation 4 Variation 4
3200 User Data_36.DOUBLE_9 None SelectOperate Variation 4 Variation 4
3201 User Data_36.DOUBLE_10 None SelectOperate Variation 4 Variation 4
3202 User Data_36.LONG_1 None SelectOperate Variation 1 Variation 1
3203 User Data_36.LONG_2 None SelectOperate Variation 1 Variation 1
3204 User Data_36.LONG_3 None SelectOperate Variation 1 Variation 1
3205 User Data_36.LONG_4 None SelectOperate Variation 1 Variation 1
3206 User Data_36.LONG_5 None SelectOperate Variation 1 Variation 1
3207 User Data_36.LONG_6 None SelectOperate Variation 1 Variation 1
3208 User Data_36.LONG_7 None SelectOperate Variation 1 Variation 1
3209 User Data_36.LONG_8 None SelectOperate Variation 1 Variation 1
3210 User Data_36.LONG_9 None SelectOperate Variation 1 Variation 1
3211 User Data_36.LONG_10 None SelectOperate Variation 1 Variation 1
3212 User Data_36.SHORT_1 None SelectOperate Variation 2 Variation 2
3213 User Data_36.SHORT_2 None SelectOperate Variation 2 Variation 2
3214 User Data_36.SHORT_3 None SelectOperate Variation 2 Variation 2
3215 User Data_36.SHORT_4 None SelectOperate Variation 2 Variation 2
3216 User Data_36.SHORT_5 None SelectOperate Variation 2 Variation 2
DNP3 Data Point List 189
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3217 User Data_36.SHORT_6 None SelectOperate Variation 2 Variation 2
3218 User Data_36.SHORT_7 None SelectOperate Variation 2 Variation 2
3219 User Data_36.SHORT_8 None SelectOperate Variation 2 Variation 2
3220 User Data_36.SHORT_9 None SelectOperate Variation 2 Variation 2
3221 User Data_36.SHORT_10 None SelectOperate Variation 2 Variation 2
3222 User Data_36.BYTE_1 None SelectOperate Variation 2 Variation 2
3223 User Data_36.BYTE_2 None SelectOperate Variation 2 Variation 2
3224 User Data_36.BYTE_3 None SelectOperate Variation 2 Variation 2
3225 User Data_36.BYTE_4 None SelectOperate Variation 2 Variation 2
3226 User Data_36.BYTE_5 None SelectOperate Variation 2 Variation 2
3227 User Data_36.BYTE_6 None SelectOperate Variation 2 Variation 2
3228 User Data_36.BYTE_7 None SelectOperate Variation 2 Variation 2
3229 User Data_36.BYTE_8 None SelectOperate Variation 2 Variation 2
3230 User Data_36.BYTE_9 None SelectOperate Variation 2 Variation 2
3231 User Data_36.BYTE_10 None SelectOperate Variation 2 Variation 2
3232 User Data_37.FLOAT_1 None SelectOperate Variation 3 Variation 3
3233 User Data_37.FLOAT_2 None SelectOperate Variation 3 Variation 3
3234 User Data_37.FLOAT_3 None SelectOperate Variation 3 Variation 3
3235 User Data_37.FLOAT_4 None SelectOperate Variation 3 Variation 3
3236 User Data_37.FLOAT_5 None SelectOperate Variation 3 Variation 3
3237 User Data_37.FLOAT_6 None SelectOperate Variation 3 Variation 3
3238 User Data_37.FLOAT_7 None SelectOperate Variation 3 Variation 3
3239 User Data_37.FLOAT_8 None SelectOperate Variation 3 Variation 3
3240 User Data_37.FLOAT_9 None SelectOperate Variation 3 Variation 3
3241 User Data_37.FLOAT_10 None SelectOperate Variation 3 Variation 3
3242 User Data_37.FLOAT_11 None SelectOperate Variation 3 Variation 3
3243 User Data_37.FLOAT_12 None SelectOperate Variation 3 Variation 3
3244 User Data_37.FLOAT_13 None SelectOperate Variation 3 Variation 3
3245 User Data_37.FLOAT_14 None SelectOperate Variation 3 Variation 3
3246 User Data_37.FLOAT_15 None SelectOperate Variation 3 Variation 3
3247 User Data_37.FLOAT_16 None SelectOperate Variation 3 Variation 3
3248 User Data_37.FLOAT_17 None SelectOperate Variation 3 Variation 3
190 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3249 User Data_37.FLOAT_18 None SelectOperate Variation 3 Variation 3
3250 User Data_37.FLOAT_19 None SelectOperate Variation 3 Variation 3
3251 User Data_37.FLOAT_20 None SelectOperate Variation 3 Variation 3
3252 User Data_37.DOUBLE_1 None SelectOperate Variation 4 Variation 4
3253 User Data_37.DOUBLE_2 None SelectOperate Variation 4 Variation 4
3254 User Data_37.DOUBLE_3 None SelectOperate Variation 4 Variation 4
3255 User Data_37.DOUBLE_4 None SelectOperate Variation 4 Variation 4
3256 User Data_37.DOUBLE_5 None SelectOperate Variation 4 Variation 4
3257 User Data_37.DOUBLE_6 None SelectOperate Variation 4 Variation 4
3258 User Data_37.DOUBLE_7 None SelectOperate Variation 4 Variation 4
3259 User Data_37.DOUBLE_8 None SelectOperate Variation 4 Variation 4
3260 User Data_37.DOUBLE_9 None SelectOperate Variation 4 Variation 4
3261 User Data_37.DOUBLE_10 None SelectOperate Variation 4 Variation 4
3262 User Data_37.LONG_1 None SelectOperate Variation 1 Variation 1
3263 User Data_37.LONG_2 None SelectOperate Variation 1 Variation 1
3264 User Data_37.LONG_3 None SelectOperate Variation 1 Variation 1
3265 User Data_37.LONG_4 None SelectOperate Variation 1 Variation 1
3266 User Data_37.LONG_5 None SelectOperate Variation 1 Variation 1
3267 User Data_37.LONG_6 None SelectOperate Variation 1 Variation 1
3268 User Data_37.LONG_7 None SelectOperate Variation 1 Variation 1
3269 User Data_37.LONG_8 None SelectOperate Variation 1 Variation 1
3270 User Data_37.LONG_9 None SelectOperate Variation 1 Variation 1
3271 User Data_37.LONG_10 None SelectOperate Variation 1 Variation 1
3272 User Data_37.SHORT_1 None SelectOperate Variation 2 Variation 2
3273 User Data_37.SHORT_2 None SelectOperate Variation 2 Variation 2
3274 User Data_37.SHORT_3 None SelectOperate Variation 2 Variation 2
3275 User Data_37.SHORT_4 None SelectOperate Variation 2 Variation 2
3276 User Data_37.SHORT_5 None SelectOperate Variation 2 Variation 2
3277 User Data_37.SHORT_6 None SelectOperate Variation 2 Variation 2
3278 User Data_37.SHORT_7 None SelectOperate Variation 2 Variation 2
3279 User Data_37.SHORT_8 None SelectOperate Variation 2 Variation 2
3280 User Data_37.SHORT_9 None SelectOperate Variation 2 Variation 2
DNP3 Data Point List 191
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3281 User Data_37.SHORT_10 None SelectOperate Variation 2 Variation 2
3282 User Data_37.BYTE_1 None SelectOperate Variation 2 Variation 2
3283 User Data_37.BYTE_2 None SelectOperate Variation 2 Variation 2
3284 User Data_37.BYTE_3 None SelectOperate Variation 2 Variation 2
3285 User Data_37.BYTE_4 None SelectOperate Variation 2 Variation 2
3286 User Data_37.BYTE_5 None SelectOperate Variation 2 Variation 2
3287 User Data_37.BYTE_6 None SelectOperate Variation 2 Variation 2
3288 User Data_37.BYTE_7 None SelectOperate Variation 2 Variation 2
3289 User Data_37.BYTE_8 None SelectOperate Variation 2 Variation 2
3290 User Data_37.BYTE_9 None SelectOperate Variation 2 Variation 2
3291 User Data_37.BYTE_10 None SelectOperate Variation 2 Variation 2
3292 User Data_38.FLOAT_1 None SelectOperate Variation 3 Variation 3
3293 User Data_38.FLOAT_2 None SelectOperate Variation 3 Variation 3
3294 User Data_38.FLOAT_3 None SelectOperate Variation 3 Variation 3
3295 User Data_38.FLOAT_4 None SelectOperate Variation 3 Variation 3
3296 User Data_38.FLOAT_5 None SelectOperate Variation 3 Variation 3
3297 User Data_38.FLOAT_6 None SelectOperate Variation 3 Variation 3
3298 User Data_38.FLOAT_7 None SelectOperate Variation 3 Variation 3
3299 User Data_38.FLOAT_8 None SelectOperate Variation 3 Variation 3
3300 User Data_38.FLOAT_9 None SelectOperate Variation 3 Variation 3
3301 User Data_38.FLOAT_10 None SelectOperate Variation 3 Variation 3
3302 User Data_38.FLOAT_11 None SelectOperate Variation 3 Variation 3
3303 User Data_38.FLOAT_12 None SelectOperate Variation 3 Variation 3
3304 User Data_38.FLOAT_13 None SelectOperate Variation 3 Variation 3
3305 User Data_38.FLOAT_14 None SelectOperate Variation 3 Variation 3
3306 User Data_38.FLOAT_15 None SelectOperate Variation 3 Variation 3
3307 User Data_38.FLOAT_16 None SelectOperate Variation 3 Variation 3
3308 User Data_38.FLOAT_17 None SelectOperate Variation 3 Variation 3
3309 User Data_38.FLOAT_18 None SelectOperate Variation 3 Variation 3
3310 User Data_38.FLOAT_19 None SelectOperate Variation 3 Variation 3
3311 User Data_38.FLOAT_20 None SelectOperate Variation 3 Variation 3
3312 User Data_38.DOUBLE_1 None SelectOperate Variation 4 Variation 4
192 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3313 User Data_38.DOUBLE_2 None SelectOperate Variation 4 Variation 4
3314 User Data_38.DOUBLE_3 None SelectOperate Variation 4 Variation 4
3315 User Data_38.DOUBLE_4 None SelectOperate Variation 4 Variation 4
3316 User Data_38.DOUBLE_5 None SelectOperate Variation 4 Variation 4
3317 User Data_38.DOUBLE_6 None SelectOperate Variation 4 Variation 4
3318 User Data_38.DOUBLE_7 None SelectOperate Variation 4 Variation 4
3319 User Data_38.DOUBLE_8 None SelectOperate Variation 4 Variation 4
3320 User Data_38.DOUBLE_9 None SelectOperate Variation 4 Variation 4
3321 User Data_38.DOUBLE_10 None SelectOperate Variation 4 Variation 4
3322 User Data_38.LONG_1 None SelectOperate Variation 1 Variation 1
3323 User Data_38.LONG_2 None SelectOperate Variation 1 Variation 1
3324 User Data_38.LONG_3 None SelectOperate Variation 1 Variation 1
3325 User Data_38.LONG_4 None SelectOperate Variation 1 Variation 1
3326 User Data_38.LONG_5 None SelectOperate Variation 1 Variation 1
3327 User Data_38.LONG_6 None SelectOperate Variation 1 Variation 1
3328 User Data_38.LONG_7 None SelectOperate Variation 1 Variation 1
3329 User Data_38.LONG_8 None SelectOperate Variation 1 Variation 1
3330 User Data_38.LONG_9 None SelectOperate Variation 1 Variation 1
3331 User Data_38.LONG_10 None SelectOperate Variation 1 Variation 1
3332 User Data_38.SHORT_1 None SelectOperate Variation 2 Variation 2
3333 User Data_38.SHORT_2 None SelectOperate Variation 2 Variation 2
3334 User Data_38.SHORT_3 None SelectOperate Variation 2 Variation 2
3335 User Data_38.SHORT_4 None SelectOperate Variation 2 Variation 2
3336 User Data_38.SHORT_5 None SelectOperate Variation 2 Variation 2
3337 User Data_38.SHORT_6 None SelectOperate Variation 2 Variation 2
3338 User Data_38.SHORT_7 None SelectOperate Variation 2 Variation 2
3339 User Data_38.SHORT_8 None SelectOperate Variation 2 Variation 2
3340 User Data_38.SHORT_9 None SelectOperate Variation 2 Variation 2
3341 User Data_38.SHORT_10 None SelectOperate Variation 2 Variation 2
3342 User Data_38.BYTE_1 None SelectOperate Variation 2 Variation 2
3343 User Data_38.BYTE_2 None SelectOperate Variation 2 Variation 2
3344 User Data_38.BYTE_3 None SelectOperate Variation 2 Variation 2
DNP3 Data Point List 193
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3345 User Data_38.BYTE_4 None SelectOperate Variation 2 Variation 2
3346 User Data_38.BYTE_5 None SelectOperate Variation 2 Variation 2
3347 User Data_38.BYTE_6 None SelectOperate Variation 2 Variation 2
3348 User Data_38.BYTE_7 None SelectOperate Variation 2 Variation 2
3349 User Data_38.BYTE_8 None SelectOperate Variation 2 Variation 2
3350 User Data_38.BYTE_9 None SelectOperate Variation 2 Variation 2
3351 User Data_38.BYTE_10 None SelectOperate Variation 2 Variation 2
3352 User Data_39.FLOAT_1 None SelectOperate Variation 3 Variation 3
3353 User Data_39.FLOAT_2 None SelectOperate Variation 3 Variation 3
3354 User Data_39.FLOAT_3 None SelectOperate Variation 3 Variation 3
3355 User Data_39.FLOAT_4 None SelectOperate Variation 3 Variation 3
3356 User Data_39.FLOAT_5 None SelectOperate Variation 3 Variation 3
3357 User Data_39.FLOAT_6 None SelectOperate Variation 3 Variation 3
3358 User Data_39.FLOAT_7 None SelectOperate Variation 3 Variation 3
3359 User Data_39.FLOAT_8 None SelectOperate Variation 3 Variation 3
3360 User Data_39.FLOAT_9 None SelectOperate Variation 3 Variation 3
3361 User Data_39.FLOAT_10 None SelectOperate Variation 3 Variation 3
3362 User Data_39.FLOAT_11 None SelectOperate Variation 3 Variation 3
3363 User Data_39.FLOAT_12 None SelectOperate Variation 3 Variation 3
3364 User Data_39.FLOAT_13 None SelectOperate Variation 3 Variation 3
3365 User Data_39.FLOAT_14 None SelectOperate Variation 3 Variation 3
3366 User Data_39.FLOAT_15 None SelectOperate Variation 3 Variation 3
3367 User Data_39.FLOAT_16 None SelectOperate Variation 3 Variation 3
3368 User Data_39.FLOAT_17 None SelectOperate Variation 3 Variation 3
3369 User Data_39.FLOAT_18 None SelectOperate Variation 3 Variation 3
3370 User Data_39.FLOAT_19 None SelectOperate Variation 3 Variation 3
3371 User Data_39.FLOAT_20 None SelectOperate Variation 3 Variation 3
3372 User Data_39.DOUBLE_1 None SelectOperate Variation 4 Variation 4
3373 User Data_39.DOUBLE_2 None SelectOperate Variation 4 Variation 4
3374 User Data_39.DOUBLE_3 None SelectOperate Variation 4 Variation 4
3375 User Data_39.DOUBLE_4 None SelectOperate Variation 4 Variation 4
3376 User Data_39.DOUBLE_5 None SelectOperate Variation 4 Variation 4
194 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3377 User Data_39.DOUBLE_6 None SelectOperate Variation 4 Variation 4
3378 User Data_39.DOUBLE_7 None SelectOperate Variation 4 Variation 4
3379 User Data_39.DOUBLE_8 None SelectOperate Variation 4 Variation 4
3380 User Data_39.DOUBLE_9 None SelectOperate Variation 4 Variation 4
3381 User Data_39.DOUBLE_10 None SelectOperate Variation 4 Variation 4
3382 User Data_39.LONG_1 None SelectOperate Variation 1 Variation 1
3383 User Data_39.LONG_2 None SelectOperate Variation 1 Variation 1
3384 User Data_39.LONG_3 None SelectOperate Variation 1 Variation 1
3385 User Data_39.LONG_4 None SelectOperate Variation 1 Variation 1
3386 User Data_39.LONG_5 None SelectOperate Variation 1 Variation 1
3387 User Data_39.LONG_6 None SelectOperate Variation 1 Variation 1
3388 User Data_39.LONG_7 None SelectOperate Variation 1 Variation 1
3389 User Data_39.LONG_8 None SelectOperate Variation 1 Variation 1
3390 User Data_39.LONG_9 None SelectOperate Variation 1 Variation 1
3391 User Data_39.LONG_10 None SelectOperate Variation 1 Variation 1
3392 User Data_39.SHORT_1 None SelectOperate Variation 2 Variation 2
3393 User Data_39.SHORT_2 None SelectOperate Variation 2 Variation 2
3394 User Data_39.SHORT_3 None SelectOperate Variation 2 Variation 2
3395 User Data_39.SHORT_4 None SelectOperate Variation 2 Variation 2
3396 User Data_39.SHORT_5 None SelectOperate Variation 2 Variation 2
3397 User Data_39.SHORT_6 None SelectOperate Variation 2 Variation 2
3398 User Data_39.SHORT_7 None SelectOperate Variation 2 Variation 2
3399 User Data_39.SHORT_8 None SelectOperate Variation 2 Variation 2
3400 User Data_39.SHORT_9 None SelectOperate Variation 2 Variation 2
3401 User Data_39.SHORT_10 None SelectOperate Variation 2 Variation 2
3402 User Data_39.BYTE_1 None SelectOperate Variation 2 Variation 2
3403 User Data_39.BYTE_2 None SelectOperate Variation 2 Variation 2
3404 User Data_39.BYTE_3 None SelectOperate Variation 2 Variation 2
3405 User Data_39.BYTE_4 None SelectOperate Variation 2 Variation 2
3406 User Data_39.BYTE_5 None SelectOperate Variation 2 Variation 2
3407 User Data_39.BYTE_6 None SelectOperate Variation 2 Variation 2
3408 User Data_39.BYTE_7 None SelectOperate Variation 2 Variation 2
DNP3 Data Point List 195
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3409 User Data_39.BYTE_8 None SelectOperate Variation 2 Variation 2
3410 User Data_39.BYTE_9 None SelectOperate Variation 2 Variation 2
3411 User Data_39.BYTE_10 None SelectOperate Variation 2 Variation 2
3412 User Data_40.FLOAT_1 None SelectOperate Variation 3 Variation 3
3413 User Data_40.FLOAT_2 None SelectOperate Variation 3 Variation 3
3414 User Data_40.FLOAT_3 None SelectOperate Variation 3 Variation 3
3415 User Data_40.FLOAT_4 None SelectOperate Variation 3 Variation 3
3416 User Data_40.FLOAT_5 None SelectOperate Variation 3 Variation 3
3417 User Data_40.FLOAT_6 None SelectOperate Variation 3 Variation 3
3418 User Data_40.FLOAT_7 None SelectOperate Variation 3 Variation 3
3419 User Data_40.FLOAT_8 None SelectOperate Variation 3 Variation 3
3420 User Data_40.FLOAT_9 None SelectOperate Variation 3 Variation 3
3421 User Data_40.FLOAT_10 None SelectOperate Variation 3 Variation 3
3422 User Data_40.FLOAT_11 None SelectOperate Variation 3 Variation 3
3423 User Data_40.FLOAT_12 None SelectOperate Variation 3 Variation 3
3424 User Data_40.FLOAT_13 None SelectOperate Variation 3 Variation 3
3425 User Data_40.FLOAT_14 None SelectOperate Variation 3 Variation 3
3426 User Data_40.FLOAT_15 None SelectOperate Variation 3 Variation 3
3427 User Data_40.FLOAT_16 None SelectOperate Variation 3 Variation 3
3428 User Data_40.FLOAT_17 None SelectOperate Variation 3 Variation 3
3429 User Data_40.FLOAT_18 None SelectOperate Variation 3 Variation 3
3430 User Data_40.FLOAT_19 None SelectOperate Variation 3 Variation 3
3431 User Data_40.FLOAT_20 None SelectOperate Variation 3 Variation 3
3432 User Data_40.DOUBLE_1 None SelectOperate Variation 4 Variation 4
3433 User Data_40.DOUBLE_2 None SelectOperate Variation 4 Variation 4
3434 User Data_40.DOUBLE_3 None SelectOperate Variation 4 Variation 4
3435 User Data_40.DOUBLE_4 None SelectOperate Variation 4 Variation 4
3436 User Data_40.DOUBLE_5 None SelectOperate Variation 4 Variation 4
3437 User Data_40.DOUBLE_6 None SelectOperate Variation 4 Variation 4
3438 User Data_40.DOUBLE_7 None SelectOperate Variation 4 Variation 4
3439 User Data_40.DOUBLE_8 None SelectOperate Variation 4 Variation 4
3440 User Data_40.DOUBLE_9 None SelectOperate Variation 4 Variation 4
196 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3441 User Data_40.DOUBLE_10 None SelectOperate Variation 4 Variation 4
3442 User Data_40.LONG_1 None SelectOperate Variation 1 Variation 1
3443 User Data_40.LONG_2 None SelectOperate Variation 1 Variation 1
3444 User Data_40.LONG_3 None SelectOperate Variation 1 Variation 1
3445 User Data_40.LONG_4 None SelectOperate Variation 1 Variation 1
3446 User Data_40.LONG_5 None SelectOperate Variation 1 Variation 1
3447 User Data_40.LONG_6 None SelectOperate Variation 1 Variation 1
3448 User Data_40.LONG_7 None SelectOperate Variation 1 Variation 1
3449 User Data_40.LONG_8 None SelectOperate Variation 1 Variation 1
3450 User Data_40.LONG_9 None SelectOperate Variation 1 Variation 1
3451 User Data_40.LONG_10 None SelectOperate Variation 1 Variation 1
3452 User Data_40.SHORT_1 None SelectOperate Variation 2 Variation 2
3453 User Data_40.SHORT_2 None SelectOperate Variation 2 Variation 2
3454 User Data_40.SHORT_3 None SelectOperate Variation 2 Variation 2
3455 User Data_40.SHORT_4 None SelectOperate Variation 2 Variation 2
3456 User Data_40.SHORT_5 None SelectOperate Variation 2 Variation 2
3457 User Data_40.SHORT_6 None SelectOperate Variation 2 Variation 2
3458 User Data_40.SHORT_7 None SelectOperate Variation 2 Variation 2
3459 User Data_40.SHORT_8 None SelectOperate Variation 2 Variation 2
3460 User Data_40.SHORT_9 None SelectOperate Variation 2 Variation 2
3461 User Data_40.SHORT_10 None SelectOperate Variation 2 Variation 2
3462 User Data_40.BYTE_1 None SelectOperate Variation 2 Variation 2
3463 User Data_40.BYTE_2 None SelectOperate Variation 2 Variation 2
3464 User Data_40.BYTE_3 None SelectOperate Variation 2 Variation 2
3465 User Data_40.BYTE_4 None SelectOperate Variation 2 Variation 2
3466 User Data_40.BYTE_5 None SelectOperate Variation 2 Variation 2
3467 User Data_40.BYTE_6 None SelectOperate Variation 2 Variation 2
3468 User Data_40.BYTE_7 None SelectOperate Variation 2 Variation 2
3469 User Data_40.BYTE_8 None SelectOperate Variation 2 Variation 2
3470 User Data_40.BYTE_9 None SelectOperate Variation 2 Variation 2
3471 User Data_40.BYTE_10 None SelectOperate Variation 2 Variation 2
3472 User Data_41.FLOAT_1 None SelectOperate Variation 3 Variation 3
DNP3 Data Point List 197
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3473 User Data_41.FLOAT_2 None SelectOperate Variation 3 Variation 3
3474 User Data_41.FLOAT_3 None SelectOperate Variation 3 Variation 3
3475 User Data_41.FLOAT_4 None SelectOperate Variation 3 Variation 3
3476 User Data_41.FLOAT_5 None SelectOperate Variation 3 Variation 3
3477 User Data_41.FLOAT_6 None SelectOperate Variation 3 Variation 3
3478 User Data_41.FLOAT_7 None SelectOperate Variation 3 Variation 3
3479 User Data_41.FLOAT_8 None SelectOperate Variation 3 Variation 3
3480 User Data_41.FLOAT_9 None SelectOperate Variation 3 Variation 3
3481 User Data_41.FLOAT_10 None SelectOperate Variation 3 Variation 3
3482 User Data_41.FLOAT_11 None SelectOperate Variation 3 Variation 3
3483 User Data_41.FLOAT_12 None SelectOperate Variation 3 Variation 3
3484 User Data_41.FLOAT_13 None SelectOperate Variation 3 Variation 3
3485 User Data_41.FLOAT_14 None SelectOperate Variation 3 Variation 3
3486 User Data_41.FLOAT_15 None SelectOperate Variation 3 Variation 3
3487 User Data_41.FLOAT_16 None SelectOperate Variation 3 Variation 3
3488 User Data_41.FLOAT_17 None SelectOperate Variation 3 Variation 3
3489 User Data_41.FLOAT_18 None SelectOperate Variation 3 Variation 3
3490 User Data_41.FLOAT_19 None SelectOperate Variation 3 Variation 3
3491 User Data_41.FLOAT_20 None SelectOperate Variation 3 Variation 3
3492 User Data_41.DOUBLE_1 None SelectOperate Variation 4 Variation 4
3493 User Data_41.DOUBLE_2 None SelectOperate Variation 4 Variation 4
3494 User Data_41.DOUBLE_3 None SelectOperate Variation 4 Variation 4
3495 User Data_41.DOUBLE_4 None SelectOperate Variation 4 Variation 4
3496 User Data_41.DOUBLE_5 None SelectOperate Variation 4 Variation 4
3497 User Data_41.DOUBLE_6 None SelectOperate Variation 4 Variation 4
3498 User Data_41.DOUBLE_7 None SelectOperate Variation 4 Variation 4
3499 User Data_41.DOUBLE_8 None SelectOperate Variation 4 Variation 4
3500 User Data_41.DOUBLE_9 None SelectOperate Variation 4 Variation 4
3501 User Data_41.DOUBLE_10 None SelectOperate Variation 4 Variation 4
3502 User Data_41.LONG_1 None SelectOperate Variation 1 Variation 1
3503 User Data_41.LONG_2 None SelectOperate Variation 1 Variation 1
3504 User Data_41.LONG_3 None SelectOperate Variation 1 Variation 1
198 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3505 User Data_41.LONG_4 None SelectOperate Variation 1 Variation 1
3506 User Data_41.LONG_5 None SelectOperate Variation 1 Variation 1
3507 User Data_41.LONG_6 None SelectOperate Variation 1 Variation 1
3508 User Data_41.LONG_7 None SelectOperate Variation 1 Variation 1
3509 User Data_41.LONG_8 None SelectOperate Variation 1 Variation 1
3510 User Data_41.LONG_9 None SelectOperate Variation 1 Variation 1
3511 User Data_41.LONG_10 None SelectOperate Variation 1 Variation 1
3512 User Data_41.SHORT_1 None SelectOperate Variation 2 Variation 2
3513 User Data_41.SHORT_2 None SelectOperate Variation 2 Variation 2
3514 User Data_41.SHORT_3 None SelectOperate Variation 2 Variation 2
3515 User Data_41.SHORT_4 None SelectOperate Variation 2 Variation 2
3516 User Data_41.SHORT_5 None SelectOperate Variation 2 Variation 2
3517 User Data_41.SHORT_6 None SelectOperate Variation 2 Variation 2
3518 User Data_41.SHORT_7 None SelectOperate Variation 2 Variation 2
3519 User Data_41.SHORT_8 None SelectOperate Variation 2 Variation 2
3520 User Data_41.SHORT_9 None SelectOperate Variation 2 Variation 2
3521 User Data_41.SHORT_10 None SelectOperate Variation 2 Variation 2
3522 User Data_41.BYTE_1 None SelectOperate Variation 2 Variation 2
3523 User Data_41.BYTE_2 None SelectOperate Variation 2 Variation 2
3524 User Data_41.BYTE_3 None SelectOperate Variation 2 Variation 2
3525 User Data_41.BYTE_4 None SelectOperate Variation 2 Variation 2
3526 User Data_41.BYTE_5 None SelectOperate Variation 2 Variation 2
3527 User Data_41.BYTE_6 None SelectOperate Variation 2 Variation 2
3528 User Data_41.BYTE_7 None SelectOperate Variation 2 Variation 2
3529 User Data_41.BYTE_8 None SelectOperate Variation 2 Variation 2
3530 User Data_41.BYTE_9 None SelectOperate Variation 2 Variation 2
3531 User Data_41.BYTE_10 None SelectOperate Variation 2 Variation 2
3532 User Data_42.FLOAT_1 None SelectOperate Variation 3 Variation 3
3533 User Data_42.FLOAT_2 None SelectOperate Variation 3 Variation 3
3534 User Data_42.FLOAT_3 None SelectOperate Variation 3 Variation 3
3535 User Data_42.FLOAT_4 None SelectOperate Variation 3 Variation 3
3536 User Data_42.FLOAT_5 None SelectOperate Variation 3 Variation 3
DNP3 Data Point List 199
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3537 User Data_42.FLOAT_6 None SelectOperate Variation 3 Variation 3
3538 User Data_42.FLOAT_7 None SelectOperate Variation 3 Variation 3
3539 User Data_42.FLOAT_8 None SelectOperate Variation 3 Variation 3
3540 User Data_42.FLOAT_9 None SelectOperate Variation 3 Variation 3
3541 User Data_42.FLOAT_10 None SelectOperate Variation 3 Variation 3
3542 User Data_42.FLOAT_11 None SelectOperate Variation 3 Variation 3
3543 User Data_42.FLOAT_12 None SelectOperate Variation 3 Variation 3
3544 User Data_42.FLOAT_13 None SelectOperate Variation 3 Variation 3
3545 User Data_42.FLOAT_14 None SelectOperate Variation 3 Variation 3
3546 User Data_42.FLOAT_15 None SelectOperate Variation 3 Variation 3
3547 User Data_42.FLOAT_16 None SelectOperate Variation 3 Variation 3
3548 User Data_42.FLOAT_17 None SelectOperate Variation 3 Variation 3
3549 User Data_42.FLOAT_18 None SelectOperate Variation 3 Variation 3
3550 User Data_42.FLOAT_19 None SelectOperate Variation 3 Variation 3
3551 User Data_42.FLOAT_20 None SelectOperate Variation 3 Variation 3
3552 User Data_42.DOUBLE_1 None SelectOperate Variation 4 Variation 4
3553 User Data_42.DOUBLE_2 None SelectOperate Variation 4 Variation 4
3554 User Data_42.DOUBLE_3 None SelectOperate Variation 4 Variation 4
3555 User Data_42.DOUBLE_4 None SelectOperate Variation 4 Variation 4
3556 User Data_42.DOUBLE_5 None SelectOperate Variation 4 Variation 4
3557 User Data_42.DOUBLE_6 None SelectOperate Variation 4 Variation 4
3558 User Data_42.DOUBLE_7 None SelectOperate Variation 4 Variation 4
3559 User Data_42.DOUBLE_8 None SelectOperate Variation 4 Variation 4
3560 User Data_42.DOUBLE_9 None SelectOperate Variation 4 Variation 4
3561 User Data_42.DOUBLE_10 None SelectOperate Variation 4 Variation 4
3562 User Data_42.LONG_1 None SelectOperate Variation 1 Variation 1
3563 User Data_42.LONG_2 None SelectOperate Variation 1 Variation 1
3564 User Data_42.LONG_3 None SelectOperate Variation 1 Variation 1
3565 User Data_42.LONG_4 None SelectOperate Variation 1 Variation 1
3566 User Data_42.LONG_5 None SelectOperate Variation 1 Variation 1
3567 User Data_42.LONG_6 None SelectOperate Variation 1 Variation 1
3568 User Data_42.LONG_7 None SelectOperate Variation 1 Variation 1
200 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3569 User Data_42.LONG_8 None SelectOperate Variation 1 Variation 1
3570 User Data_42.LONG_9 None SelectOperate Variation 1 Variation 1
3571 User Data_42.LONG_10 None SelectOperate Variation 1 Variation 1
3572 User Data_42.SHORT_1 None SelectOperate Variation 2 Variation 2
3573 User Data_42.SHORT_2 None SelectOperate Variation 2 Variation 2
3574 User Data_42.SHORT_3 None SelectOperate Variation 2 Variation 2
3575 User Data_42.SHORT_4 None SelectOperate Variation 2 Variation 2
3576 User Data_42.SHORT_5 None SelectOperate Variation 2 Variation 2
3577 User Data_42.SHORT_6 None SelectOperate Variation 2 Variation 2
3578 User Data_42.SHORT_7 None SelectOperate Variation 2 Variation 2
3579 User Data_42.SHORT_8 None SelectOperate Variation 2 Variation 2
3580 User Data_42.SHORT_9 None SelectOperate Variation 2 Variation 2
3581 User Data_42.SHORT_10 None SelectOperate Variation 2 Variation 2
3582 User Data_42.BYTE_1 None SelectOperate Variation 2 Variation 2
3583 User Data_42.BYTE_2 None SelectOperate Variation 2 Variation 2
3584 User Data_42.BYTE_3 None SelectOperate Variation 2 Variation 2
3585 User Data_42.BYTE_4 None SelectOperate Variation 2 Variation 2
3586 User Data_42.BYTE_5 None SelectOperate Variation 2 Variation 2
3587 User Data_42.BYTE_6 None SelectOperate Variation 2 Variation 2
3588 User Data_42.BYTE_7 None SelectOperate Variation 2 Variation 2
3589 User Data_42.BYTE_8 None SelectOperate Variation 2 Variation 2
3590 User Data_42.BYTE_9 None SelectOperate Variation 2 Variation 2
3591 User Data_42.BYTE_10 None SelectOperate Variation 2 Variation 2
3592 User Data_43.FLOAT_1 None SelectOperate Variation 3 Variation 3
3593 User Data_43.FLOAT_2 None SelectOperate Variation 3 Variation 3
3594 User Data_43.FLOAT_3 None SelectOperate Variation 3 Variation 3
3595 User Data_43.FLOAT_4 None SelectOperate Variation 3 Variation 3
3596 User Data_43.FLOAT_5 None SelectOperate Variation 3 Variation 3
3597 User Data_43.FLOAT_6 None SelectOperate Variation 3 Variation 3
3598 User Data_43.FLOAT_7 None SelectOperate Variation 3 Variation 3
3599 User Data_43.FLOAT_8 None SelectOperate Variation 3 Variation 3
3600 User Data_43.FLOAT_9 None SelectOperate Variation 3 Variation 3
DNP3 Data Point List 201
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3601 User Data_43.FLOAT_10 None SelectOperate Variation 3 Variation 3
3602 User Data_43.FLOAT_11 None SelectOperate Variation 3 Variation 3
3603 User Data_43.FLOAT_12 None SelectOperate Variation 3 Variation 3
3604 User Data_43.FLOAT_13 None SelectOperate Variation 3 Variation 3
3605 User Data_43.FLOAT_14 None SelectOperate Variation 3 Variation 3
3606 User Data_43.FLOAT_15 None SelectOperate Variation 3 Variation 3
3607 User Data_43.FLOAT_16 None SelectOperate Variation 3 Variation 3
3608 User Data_43.FLOAT_17 None SelectOperate Variation 3 Variation 3
3609 User Data_43.FLOAT_18 None SelectOperate Variation 3 Variation 3
3610 User Data_43.FLOAT_19 None SelectOperate Variation 3 Variation 3
3611 User Data_43.FLOAT_20 None SelectOperate Variation 3 Variation 3
3612 User Data_43.DOUBLE_1 None SelectOperate Variation 4 Variation 4
3613 User Data_43.DOUBLE_2 None SelectOperate Variation 4 Variation 4
3614 User Data_43.DOUBLE_3 None SelectOperate Variation 4 Variation 4
3615 User Data_43.DOUBLE_4 None SelectOperate Variation 4 Variation 4
3616 User Data_43.DOUBLE_5 None SelectOperate Variation 4 Variation 4
3617 User Data_43.DOUBLE_6 None SelectOperate Variation 4 Variation 4
3618 User Data_43.DOUBLE_7 None SelectOperate Variation 4 Variation 4
3619 User Data_43.DOUBLE_8 None SelectOperate Variation 4 Variation 4
3620 User Data_43.DOUBLE_9 None SelectOperate Variation 4 Variation 4
3621 User Data_43.DOUBLE_10 None SelectOperate Variation 4 Variation 4
3622 User Data_43.LONG_1 None SelectOperate Variation 1 Variation 1
3623 User Data_43.LONG_2 None SelectOperate Variation 1 Variation 1
3624 User Data_43.LONG_3 None SelectOperate Variation 1 Variation 1
3625 User Data_43.LONG_4 None SelectOperate Variation 1 Variation 1
3626 User Data_43.LONG_5 None SelectOperate Variation 1 Variation 1
3627 User Data_43.LONG_6 None SelectOperate Variation 1 Variation 1
3628 User Data_43.LONG_7 None SelectOperate Variation 1 Variation 1
3629 User Data_43.LONG_8 None SelectOperate Variation 1 Variation 1
3630 User Data_43.LONG_9 None SelectOperate Variation 1 Variation 1
3631 User Data_43.LONG_10 None SelectOperate Variation 1 Variation 1
3632 User Data_43.SHORT_1 None SelectOperate Variation 2 Variation 2
202 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3633 User Data_43.SHORT_2 None SelectOperate Variation 2 Variation 2
3634 User Data_43.SHORT_3 None SelectOperate Variation 2 Variation 2
3635 User Data_43.SHORT_4 None SelectOperate Variation 2 Variation 2
3636 User Data_43.SHORT_5 None SelectOperate Variation 2 Variation 2
3637 User Data_43.SHORT_6 None SelectOperate Variation 2 Variation 2
3638 User Data_43.SHORT_7 None SelectOperate Variation 2 Variation 2
3639 User Data_43.SHORT_8 None SelectOperate Variation 2 Variation 2
3640 User Data_43.SHORT_9 None SelectOperate Variation 2 Variation 2
3641 User Data_43.SHORT_10 None SelectOperate Variation 2 Variation 2
3642 User Data_43.BYTE_1 None SelectOperate Variation 2 Variation 2
3643 User Data_43.BYTE_2 None SelectOperate Variation 2 Variation 2
3644 User Data_43.BYTE_3 None SelectOperate Variation 2 Variation 2
3645 User Data_43.BYTE_4 None SelectOperate Variation 2 Variation 2
3646 User Data_43.BYTE_5 None SelectOperate Variation 2 Variation 2
3647 User Data_43.BYTE_6 None SelectOperate Variation 2 Variation 2
3648 User Data_43.BYTE_7 None SelectOperate Variation 2 Variation 2
3649 User Data_43.BYTE_8 None SelectOperate Variation 2 Variation 2
3650 User Data_43.BYTE_9 None SelectOperate Variation 2 Variation 2
3651 User Data_43.BYTE_10 None SelectOperate Variation 2 Variation 2
3652 User Data_44.FLOAT_1 None SelectOperate Variation 3 Variation 3
3653 User Data_44.FLOAT_2 None SelectOperate Variation 3 Variation 3
3654 User Data_44.FLOAT_3 None SelectOperate Variation 3 Variation 3
3655 User Data_44.FLOAT_4 None SelectOperate Variation 3 Variation 3
3656 User Data_44.FLOAT_5 None SelectOperate Variation 3 Variation 3
3657 User Data_44.FLOAT_6 None SelectOperate Variation 3 Variation 3
3658 User Data_44.FLOAT_7 None SelectOperate Variation 3 Variation 3
3659 User Data_44.FLOAT_8 None SelectOperate Variation 3 Variation 3
3660 User Data_44.FLOAT_9 None SelectOperate Variation 3 Variation 3
3661 User Data_44.FLOAT_10 None SelectOperate Variation 3 Variation 3
3662 User Data_44.FLOAT_11 None SelectOperate Variation 3 Variation 3
3663 User Data_44.FLOAT_12 None SelectOperate Variation 3 Variation 3
3664 User Data_44.FLOAT_13 None SelectOperate Variation 3 Variation 3
DNP3 Data Point List 203
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3665 User Data_44.FLOAT_14 None SelectOperate Variation 3 Variation 3
3666 User Data_44.FLOAT_15 None SelectOperate Variation 3 Variation 3
3667 User Data_44.FLOAT_16 None SelectOperate Variation 3 Variation 3
3668 User Data_44.FLOAT_17 None SelectOperate Variation 3 Variation 3
3669 User Data_44.FLOAT_18 None SelectOperate Variation 3 Variation 3
3670 User Data_44.FLOAT_19 None SelectOperate Variation 3 Variation 3
3671 User Data_44.FLOAT_20 None SelectOperate Variation 3 Variation 3
3672 User Data_44.DOUBLE_1 None SelectOperate Variation 4 Variation 4
3673 User Data_44.DOUBLE_2 None SelectOperate Variation 4 Variation 4
3674 User Data_44.DOUBLE_3 None SelectOperate Variation 4 Variation 4
3675 User Data_44.DOUBLE_4 None SelectOperate Variation 4 Variation 4
3676 User Data_44.DOUBLE_5 None SelectOperate Variation 4 Variation 4
3677 User Data_44.DOUBLE_6 None SelectOperate Variation 4 Variation 4
3678 User Data_44.DOUBLE_7 None SelectOperate Variation 4 Variation 4
3679 User Data_44.DOUBLE_8 None SelectOperate Variation 4 Variation 4
3680 User Data_44.DOUBLE_9 None SelectOperate Variation 4 Variation 4
3681 User Data_44.DOUBLE_10 None SelectOperate Variation 4 Variation 4
3682 User Data_44.LONG_1 None SelectOperate Variation 1 Variation 1
3683 User Data_44.LONG_2 None SelectOperate Variation 1 Variation 1
3684 User Data_44.LONG_3 None SelectOperate Variation 1 Variation 1
3685 User Data_44.LONG_4 None SelectOperate Variation 1 Variation 1
3686 User Data_44.LONG_5 None SelectOperate Variation 1 Variation 1
3687 User Data_44.LONG_6 None SelectOperate Variation 1 Variation 1
3688 User Data_44.LONG_7 None SelectOperate Variation 1 Variation 1
3689 User Data_44.LONG_8 None SelectOperate Variation 1 Variation 1
3690 User Data_44.LONG_9 None SelectOperate Variation 1 Variation 1
3691 User Data_44.LONG_10 None SelectOperate Variation 1 Variation 1
3692 User Data_44.SHORT_1 None SelectOperate Variation 2 Variation 2
3693 User Data_44.SHORT_2 None SelectOperate Variation 2 Variation 2
3694 User Data_44.SHORT_3 None SelectOperate Variation 2 Variation 2
3695 User Data_44.SHORT_4 None SelectOperate Variation 2 Variation 2
3696 User Data_44.SHORT_5 None SelectOperate Variation 2 Variation 2
204 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3697 User Data_44.SHORT_6 None SelectOperate Variation 2 Variation 2
3698 User Data_44.SHORT_7 None SelectOperate Variation 2 Variation 2
3699 User Data_44.SHORT_8 None SelectOperate Variation 2 Variation 2
3700 User Data_44.SHORT_9 None SelectOperate Variation 2 Variation 2
3701 User Data_44.SHORT_10 None SelectOperate Variation 2 Variation 2
3702 User Data_44.BYTE_1 None SelectOperate Variation 2 Variation 2
3703 User Data_44.BYTE_2 None SelectOperate Variation 2 Variation 2
3704 User Data_44.BYTE_3 None SelectOperate Variation 2 Variation 2
3705 User Data_44.BYTE_4 None SelectOperate Variation 2 Variation 2
3706 User Data_44.BYTE_5 None SelectOperate Variation 2 Variation 2
3707 User Data_44.BYTE_6 None SelectOperate Variation 2 Variation 2
3708 User Data_44.BYTE_7 None SelectOperate Variation 2 Variation 2
3709 User Data_44.BYTE_8 None SelectOperate Variation 2 Variation 2
3710 User Data_44.BYTE_9 None SelectOperate Variation 2 Variation 2
3711 User Data_44.BYTE_10 None SelectOperate Variation 2 Variation 2
3712 User Data_45.FLOAT_1 None SelectOperate Variation 3 Variation 3
3713 User Data_45.FLOAT_2 None SelectOperate Variation 3 Variation 3
3714 User Data_45.FLOAT_3 None SelectOperate Variation 3 Variation 3
3715 User Data_45.FLOAT_4 None SelectOperate Variation 3 Variation 3
3716 User Data_45.FLOAT_5 None SelectOperate Variation 3 Variation 3
3717 User Data_45.FLOAT_6 None SelectOperate Variation 3 Variation 3
3718 User Data_45.FLOAT_7 None SelectOperate Variation 3 Variation 3
3719 User Data_45.FLOAT_8 None SelectOperate Variation 3 Variation 3
3720 User Data_45.FLOAT_9 None SelectOperate Variation 3 Variation 3
3721 User Data_45.FLOAT_10 None SelectOperate Variation 3 Variation 3
3722 User Data_45.FLOAT_11 None SelectOperate Variation 3 Variation 3
3723 User Data_45.FLOAT_12 None SelectOperate Variation 3 Variation 3
3724 User Data_45.FLOAT_13 None SelectOperate Variation 3 Variation 3
3725 User Data_45.FLOAT_14 None SelectOperate Variation 3 Variation 3
3726 User Data_45.FLOAT_15 None SelectOperate Variation 3 Variation 3
3727 User Data_45.FLOAT_16 None SelectOperate Variation 3 Variation 3
3728 User Data_45.FLOAT_17 None SelectOperate Variation 3 Variation 3
DNP3 Data Point List 205
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3729 User Data_45.FLOAT_18 None SelectOperate Variation 3 Variation 3
3730 User Data_45.FLOAT_19 None SelectOperate Variation 3 Variation 3
3731 User Data_45.FLOAT_20 None SelectOperate Variation 3 Variation 3
3732 User Data_45.DOUBLE_1 None SelectOperate Variation 4 Variation 4
3733 User Data_45.DOUBLE_2 None SelectOperate Variation 4 Variation 4
3734 User Data_45.DOUBLE_3 None SelectOperate Variation 4 Variation 4
3735 User Data_45.DOUBLE_4 None SelectOperate Variation 4 Variation 4
3736 User Data_45.DOUBLE_5 None SelectOperate Variation 4 Variation 4
3737 User Data_45.DOUBLE_6 None SelectOperate Variation 4 Variation 4
3738 User Data_45.DOUBLE_7 None SelectOperate Variation 4 Variation 4
3739 User Data_45.DOUBLE_8 None SelectOperate Variation 4 Variation 4
3740 User Data_45.DOUBLE_9 None SelectOperate Variation 4 Variation 4
3741 User Data_45.DOUBLE_10 None SelectOperate Variation 4 Variation 4
3742 User Data_45.LONG_1 None SelectOperate Variation 1 Variation 1
3743 User Data_45.LONG_2 None SelectOperate Variation 1 Variation 1
3744 User Data_45.LONG_3 None SelectOperate Variation 1 Variation 1
3745 User Data_45.LONG_4 None SelectOperate Variation 1 Variation 1
3746 User Data_45.LONG_5 None SelectOperate Variation 1 Variation 1
3747 User Data_45.LONG_6 None SelectOperate Variation 1 Variation 1
3748 User Data_45.LONG_7 None SelectOperate Variation 1 Variation 1
3749 User Data_45.LONG_8 None SelectOperate Variation 1 Variation 1
3750 User Data_45.LONG_9 None SelectOperate Variation 1 Variation 1
3751 User Data_45.LONG_10 None SelectOperate Variation 1 Variation 1
3752 User Data_45.SHORT_1 None SelectOperate Variation 2 Variation 2
3753 User Data_45.SHORT_2 None SelectOperate Variation 2 Variation 2
3754 User Data_45.SHORT_3 None SelectOperate Variation 2 Variation 2
3755 User Data_45.SHORT_4 None SelectOperate Variation 2 Variation 2
3756 User Data_45.SHORT_5 None SelectOperate Variation 2 Variation 2
3757 User Data_45.SHORT_6 None SelectOperate Variation 2 Variation 2
3758 User Data_45.SHORT_7 None SelectOperate Variation 2 Variation 2
3759 User Data_45.SHORT_8 None SelectOperate Variation 2 Variation 2
3760 User Data_45.SHORT_9 None SelectOperate Variation 2 Variation 2
206 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3761 User Data_45.SHORT_10 None SelectOperate Variation 2 Variation 2
3762 User Data_45.BYTE_1 None SelectOperate Variation 2 Variation 2
3763 User Data_45.BYTE_2 None SelectOperate Variation 2 Variation 2
3764 User Data_45.BYTE_3 None SelectOperate Variation 2 Variation 2
3765 User Data_45.BYTE_4 None SelectOperate Variation 2 Variation 2
3766 User Data_45.BYTE_5 None SelectOperate Variation 2 Variation 2
3767 User Data_45.BYTE_6 None SelectOperate Variation 2 Variation 2
3768 User Data_45.BYTE_7 None SelectOperate Variation 2 Variation 2
3769 User Data_45.BYTE_8 None SelectOperate Variation 2 Variation 2
3770 User Data_45.BYTE_9 None SelectOperate Variation 2 Variation 2
3771 User Data_45.BYTE_10 None SelectOperate Variation 2 Variation 2
3772 User Data_46.FLOAT_1 None SelectOperate Variation 3 Variation 3
3773 User Data_46.FLOAT_2 None SelectOperate Variation 3 Variation 3
3774 User Data_46.FLOAT_3 None SelectOperate Variation 3 Variation 3
3775 User Data_46.FLOAT_4 None SelectOperate Variation 3 Variation 3
3776 User Data_46.FLOAT_5 None SelectOperate Variation 3 Variation 3
3777 User Data_46.FLOAT_6 None SelectOperate Variation 3 Variation 3
3778 User Data_46.FLOAT_7 None SelectOperate Variation 3 Variation 3
3779 User Data_46.FLOAT_8 None SelectOperate Variation 3 Variation 3
3780 User Data_46.FLOAT_9 None SelectOperate Variation 3 Variation 3
3781 User Data_46.FLOAT_10 None SelectOperate Variation 3 Variation 3
3782 User Data_46.FLOAT_11 None SelectOperate Variation 3 Variation 3
3783 User Data_46.FLOAT_12 None SelectOperate Variation 3 Variation 3
3784 User Data_46.FLOAT_13 None SelectOperate Variation 3 Variation 3
3785 User Data_46.FLOAT_14 None SelectOperate Variation 3 Variation 3
3786 User Data_46.FLOAT_15 None SelectOperate Variation 3 Variation 3
3787 User Data_46.FLOAT_16 None SelectOperate Variation 3 Variation 3
3788 User Data_46.FLOAT_17 None SelectOperate Variation 3 Variation 3
3789 User Data_46.FLOAT_18 None SelectOperate Variation 3 Variation 3
3790 User Data_46.FLOAT_19 None SelectOperate Variation 3 Variation 3
3791 User Data_46.FLOAT_20 None SelectOperate Variation 3 Variation 3
3792 User Data_46.DOUBLE_1 None SelectOperate Variation 4 Variation 4
DNP3 Data Point List 207
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3793 User Data_46.DOUBLE_2 None SelectOperate Variation 4 Variation 4
3794 User Data_46.DOUBLE_3 None SelectOperate Variation 4 Variation 4
3795 User Data_46.DOUBLE_4 None SelectOperate Variation 4 Variation 4
3796 User Data_46.DOUBLE_5 None SelectOperate Variation 4 Variation 4
3797 User Data_46.DOUBLE_6 None SelectOperate Variation 4 Variation 4
3798 User Data_46.DOUBLE_7 None SelectOperate Variation 4 Variation 4
3799 User Data_46.DOUBLE_8 None SelectOperate Variation 4 Variation 4
3800 User Data_46.DOUBLE_9 None SelectOperate Variation 4 Variation 4
3801 User Data_46.DOUBLE_10 None SelectOperate Variation 4 Variation 4
3802 User Data_46.LONG_1 None SelectOperate Variation 1 Variation 1
3803 User Data_46.LONG_2 None SelectOperate Variation 1 Variation 1
3804 User Data_46.LONG_3 None SelectOperate Variation 1 Variation 1
3805 User Data_46.LONG_4 None SelectOperate Variation 1 Variation 1
3806 User Data_46.LONG_5 None SelectOperate Variation 1 Variation 1
3807 User Data_46.LONG_6 None SelectOperate Variation 1 Variation 1
3808 User Data_46.LONG_7 None SelectOperate Variation 1 Variation 1
3809 User Data_46.LONG_8 None SelectOperate Variation 1 Variation 1
3810 User Data_46.LONG_9 None SelectOperate Variation 1 Variation 1
3811 User Data_46.LONG_10 None SelectOperate Variation 1 Variation 1
3812 User Data_46.SHORT_1 None SelectOperate Variation 2 Variation 2
3813 User Data_46.SHORT_2 None SelectOperate Variation 2 Variation 2
3814 User Data_46.SHORT_3 None SelectOperate Variation 2 Variation 2
3815 User Data_46.SHORT_4 None SelectOperate Variation 2 Variation 2
3816 User Data_46.SHORT_5 None SelectOperate Variation 2 Variation 2
3817 User Data_46.SHORT_6 None SelectOperate Variation 2 Variation 2
3818 User Data_46.SHORT_7 None SelectOperate Variation 2 Variation 2
3819 User Data_46.SHORT_8 None SelectOperate Variation 2 Variation 2
3820 User Data_46.SHORT_9 None SelectOperate Variation 2 Variation 2
3821 User Data_46.SHORT_10 None SelectOperate Variation 2 Variation 2
3822 User Data_46.BYTE_1 None SelectOperate Variation 2 Variation 2
3823 User Data_46.BYTE_2 None SelectOperate Variation 2 Variation 2
3824 User Data_46.BYTE_3 None SelectOperate Variation 2 Variation 2
208 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3825 User Data_46.BYTE_4 None SelectOperate Variation 2 Variation 2
3826 User Data_46.BYTE_5 None SelectOperate Variation 2 Variation 2
3827 User Data_46.BYTE_6 None SelectOperate Variation 2 Variation 2
3828 User Data_46.BYTE_7 None SelectOperate Variation 2 Variation 2
3829 User Data_46.BYTE_8 None SelectOperate Variation 2 Variation 2
3830 User Data_46.BYTE_9 None SelectOperate Variation 2 Variation 2
3831 User Data_46.BYTE_10 None SelectOperate Variation 2 Variation 2
3832 User Data_47.FLOAT_1 None SelectOperate Variation 3 Variation 3
3833 User Data_47.FLOAT_2 None SelectOperate Variation 3 Variation 3
3834 User Data_47.FLOAT_3 None SelectOperate Variation 3 Variation 3
3835 User Data_47.FLOAT_4 None SelectOperate Variation 3 Variation 3
3836 User Data_47.FLOAT_5 None SelectOperate Variation 3 Variation 3
3837 User Data_47.FLOAT_6 None SelectOperate Variation 3 Variation 3
3838 User Data_47.FLOAT_7 None SelectOperate Variation 3 Variation 3
3839 User Data_47.FLOAT_8 None SelectOperate Variation 3 Variation 3
3840 User Data_47.FLOAT_9 None SelectOperate Variation 3 Variation 3
3841 User Data_47.FLOAT_10 None SelectOperate Variation 3 Variation 3
3842 User Data_47.FLOAT_11 None SelectOperate Variation 3 Variation 3
3843 User Data_47.FLOAT_12 None SelectOperate Variation 3 Variation 3
3844 User Data_47.FLOAT_13 None SelectOperate Variation 3 Variation 3
3845 User Data_47.FLOAT_14 None SelectOperate Variation 3 Variation 3
3846 User Data_47.FLOAT_15 None SelectOperate Variation 3 Variation 3
3847 User Data_47.FLOAT_16 None SelectOperate Variation 3 Variation 3
3848 User Data_47.FLOAT_17 None SelectOperate Variation 3 Variation 3
3849 User Data_47.FLOAT_18 None SelectOperate Variation 3 Variation 3
3850 User Data_47.FLOAT_19 None SelectOperate Variation 3 Variation 3
3851 User Data_47.FLOAT_20 None SelectOperate Variation 3 Variation 3
3852 User Data_47.DOUBLE_1 None SelectOperate Variation 4 Variation 4
3853 User Data_47.DOUBLE_2 None SelectOperate Variation 4 Variation 4
3854 User Data_47.DOUBLE_3 None SelectOperate Variation 4 Variation 4
3855 User Data_47.DOUBLE_4 None SelectOperate Variation 4 Variation 4
3856 User Data_47.DOUBLE_5 None SelectOperate Variation 4 Variation 4
DNP3 Data Point List 209
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3857 User Data_47.DOUBLE_6 None SelectOperate Variation 4 Variation 4
3858 User Data_47.DOUBLE_7 None SelectOperate Variation 4 Variation 4
3859 User Data_47.DOUBLE_8 None SelectOperate Variation 4 Variation 4
3860 User Data_47.DOUBLE_9 None SelectOperate Variation 4 Variation 4
3861 User Data_47.DOUBLE_10 None SelectOperate Variation 4 Variation 4
3862 User Data_47.LONG_1 None SelectOperate Variation 1 Variation 1
3863 User Data_47.LONG_2 None SelectOperate Variation 1 Variation 1
3864 User Data_47.LONG_3 None SelectOperate Variation 1 Variation 1
3865 User Data_47.LONG_4 None SelectOperate Variation 1 Variation 1
3866 User Data_47.LONG_5 None SelectOperate Variation 1 Variation 1
3867 User Data_47.LONG_6 None SelectOperate Variation 1 Variation 1
3868 User Data_47.LONG_7 None SelectOperate Variation 1 Variation 1
3869 User Data_47.LONG_8 None SelectOperate Variation 1 Variation 1
3870 User Data_47.LONG_9 None SelectOperate Variation 1 Variation 1
3871 User Data_47.LONG_10 None SelectOperate Variation 1 Variation 1
3872 User Data_47.SHORT_1 None SelectOperate Variation 2 Variation 2
3873 User Data_47.SHORT_2 None SelectOperate Variation 2 Variation 2
3874 User Data_47.SHORT_3 None SelectOperate Variation 2 Variation 2
3875 User Data_47.SHORT_4 None SelectOperate Variation 2 Variation 2
3876 User Data_47.SHORT_5 None SelectOperate Variation 2 Variation 2
3877 User Data_47.SHORT_6 None SelectOperate Variation 2 Variation 2
3878 User Data_47.SHORT_7 None SelectOperate Variation 2 Variation 2
3879 User Data_47.SHORT_8 None SelectOperate Variation 2 Variation 2
3880 User Data_47.SHORT_9 None SelectOperate Variation 2 Variation 2
3881 User Data_47.SHORT_10 None SelectOperate Variation 2 Variation 2
3882 User Data_47.BYTE_1 None SelectOperate Variation 2 Variation 2
3883 User Data_47.BYTE_2 None SelectOperate Variation 2 Variation 2
3884 User Data_47.BYTE_3 None SelectOperate Variation 2 Variation 2
3885 User Data_47.BYTE_4 None SelectOperate Variation 2 Variation 2
3886 User Data_47.BYTE_5 None SelectOperate Variation 2 Variation 2
3887 User Data_47.BYTE_6 None SelectOperate Variation 2 Variation 2
3888 User Data_47.BYTE_7 None SelectOperate Variation 2 Variation 2
210 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3889 User Data_47.BYTE_8 None SelectOperate Variation 2 Variation 2
3890 User Data_47.BYTE_9 None SelectOperate Variation 2 Variation 2
3891 User Data_47.BYTE_10 None SelectOperate Variation 2 Variation 2
3892 User Data_48.FLOAT_1 None SelectOperate Variation 3 Variation 3
3893 User Data_48.FLOAT_2 None SelectOperate Variation 3 Variation 3
3894 User Data_48.FLOAT_3 None SelectOperate Variation 3 Variation 3
3895 User Data_48.FLOAT_4 None SelectOperate Variation 3 Variation 3
3896 User Data_48.FLOAT_5 None SelectOperate Variation 3 Variation 3
3897 User Data_48.FLOAT_6 None SelectOperate Variation 3 Variation 3
3898 User Data_48.FLOAT_7 None SelectOperate Variation 3 Variation 3
3899 User Data_48.FLOAT_8 None SelectOperate Variation 3 Variation 3
3900 User Data_48.FLOAT_9 None SelectOperate Variation 3 Variation 3
3901 User Data_48.FLOAT_10 None SelectOperate Variation 3 Variation 3
3902 User Data_48.FLOAT_11 None SelectOperate Variation 3 Variation 3
3903 User Data_48.FLOAT_12 None SelectOperate Variation 3 Variation 3
3904 User Data_48.FLOAT_13 None SelectOperate Variation 3 Variation 3
3905 User Data_48.FLOAT_14 None SelectOperate Variation 3 Variation 3
3906 User Data_48.FLOAT_15 None SelectOperate Variation 3 Variation 3
3907 User Data_48.FLOAT_16 None SelectOperate Variation 3 Variation 3
3908 User Data_48.FLOAT_17 None SelectOperate Variation 3 Variation 3
3909 User Data_48.FLOAT_18 None SelectOperate Variation 3 Variation 3
3910 User Data_48.FLOAT_19 None SelectOperate Variation 3 Variation 3
3911 User Data_48.FLOAT_20 None SelectOperate Variation 3 Variation 3
3912 User Data_48.DOUBLE_1 None SelectOperate Variation 4 Variation 4
3913 User Data_48.DOUBLE_2 None SelectOperate Variation 4 Variation 4
3914 User Data_48.DOUBLE_3 None SelectOperate Variation 4 Variation 4
3915 User Data_48.DOUBLE_4 None SelectOperate Variation 4 Variation 4
3916 User Data_48.DOUBLE_5 None SelectOperate Variation 4 Variation 4
3917 User Data_48.DOUBLE_6 None SelectOperate Variation 4 Variation 4
3918 User Data_48.DOUBLE_7 None SelectOperate Variation 4 Variation 4
3919 User Data_48.DOUBLE_8 None SelectOperate Variation 4 Variation 4
3920 User Data_48.DOUBLE_9 None SelectOperate Variation 4 Variation 4
DNP3 Data Point List 211
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3921 User Data_48.DOUBLE_10 None SelectOperate Variation 4 Variation 4
3922 User Data_48.LONG_1 None SelectOperate Variation 1 Variation 1
3923 User Data_48.LONG_2 None SelectOperate Variation 1 Variation 1
3924 User Data_48.LONG_3 None SelectOperate Variation 1 Variation 1
3925 User Data_48.LONG_4 None SelectOperate Variation 1 Variation 1
3926 User Data_48.LONG_5 None SelectOperate Variation 1 Variation 1
3927 User Data_48.LONG_6 None SelectOperate Variation 1 Variation 1
3928 User Data_48.LONG_7 None SelectOperate Variation 1 Variation 1
3929 User Data_48.LONG_8 None SelectOperate Variation 1 Variation 1
3930 User Data_48.LONG_9 None SelectOperate Variation 1 Variation 1
3931 User Data_48.LONG_10 None SelectOperate Variation 1 Variation 1
3932 User Data_48.SHORT_1 None SelectOperate Variation 2 Variation 2
3933 User Data_48.SHORT_2 None SelectOperate Variation 2 Variation 2
3934 User Data_48.SHORT_3 None SelectOperate Variation 2 Variation 2
3935 User Data_48.SHORT_4 None SelectOperate Variation 2 Variation 2
3936 User Data_48.SHORT_5 None SelectOperate Variation 2 Variation 2
3937 User Data_48.SHORT_6 None SelectOperate Variation 2 Variation 2
3938 User Data_48.SHORT_7 None SelectOperate Variation 2 Variation 2
3939 User Data_48.SHORT_8 None SelectOperate Variation 2 Variation 2
3940 User Data_48.SHORT_9 None SelectOperate Variation 2 Variation 2
3941 User Data_48.SHORT_10 None SelectOperate Variation 2 Variation 2
3942 User Data_48.BYTE_1 None SelectOperate Variation 2 Variation 2
3943 User Data_48.BYTE_2 None SelectOperate Variation 2 Variation 2
3944 User Data_48.BYTE_3 None SelectOperate Variation 2 Variation 2
3945 User Data_48.BYTE_4 None SelectOperate Variation 2 Variation 2
3946 User Data_48.BYTE_5 None SelectOperate Variation 2 Variation 2
3947 User Data_48.BYTE_6 None SelectOperate Variation 2 Variation 2
3948 User Data_48.BYTE_7 None SelectOperate Variation 2 Variation 2
3949 User Data_48.BYTE_8 None SelectOperate Variation 2 Variation 2
3950 User Data_48.BYTE_9 None SelectOperate Variation 2 Variation 2
3951 User Data_48.BYTE_10 None SelectOperate Variation 2 Variation 2
3952 User Data_49.FLOAT_1 None SelectOperate Variation 3 Variation 3
212 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3953 User Data_49.FLOAT_2 None SelectOperate Variation 3 Variation 3
3954 User Data_49.FLOAT_3 None SelectOperate Variation 3 Variation 3
3955 User Data_49.FLOAT_4 None SelectOperate Variation 3 Variation 3
3956 User Data_49.FLOAT_5 None SelectOperate Variation 3 Variation 3
3957 User Data_49.FLOAT_6 None SelectOperate Variation 3 Variation 3
3958 User Data_49.FLOAT_7 None SelectOperate Variation 3 Variation 3
3959 User Data_49.FLOAT_8 None SelectOperate Variation 3 Variation 3
3960 User Data_49.FLOAT_9 None SelectOperate Variation 3 Variation 3
3961 User Data_49.FLOAT_10 None SelectOperate Variation 3 Variation 3
3962 User Data_49.FLOAT_11 None SelectOperate Variation 3 Variation 3
3963 User Data_49.FLOAT_12 None SelectOperate Variation 3 Variation 3
3964 User Data_49.FLOAT_13 None SelectOperate Variation 3 Variation 3
3965 User Data_49.FLOAT_14 None SelectOperate Variation 3 Variation 3
3966 User Data_49.FLOAT_15 None SelectOperate Variation 3 Variation 3
3967 User Data_49.FLOAT_16 None SelectOperate Variation 3 Variation 3
3968 User Data_49.FLOAT_17 None SelectOperate Variation 3 Variation 3
3969 User Data_49.FLOAT_18 None SelectOperate Variation 3 Variation 3
3970 User Data_49.FLOAT_19 None SelectOperate Variation 3 Variation 3
3971 User Data_49.FLOAT_20 None SelectOperate Variation 3 Variation 3
3972 User Data_49.DOUBLE_1 None SelectOperate Variation 4 Variation 4
3973 User Data_49.DOUBLE_2 None SelectOperate Variation 4 Variation 4
3974 User Data_49.DOUBLE_3 None SelectOperate Variation 4 Variation 4
3975 User Data_49.DOUBLE_4 None SelectOperate Variation 4 Variation 4
3976 User Data_49.DOUBLE_5 None SelectOperate Variation 4 Variation 4
3977 User Data_49.DOUBLE_6 None SelectOperate Variation 4 Variation 4
3978 User Data_49.DOUBLE_7 None SelectOperate Variation 4 Variation 4
3979 User Data_49.DOUBLE_8 None SelectOperate Variation 4 Variation 4
3980 User Data_49.DOUBLE_9 None SelectOperate Variation 4 Variation 4
3981 User Data_49.DOUBLE_10 None SelectOperate Variation 4 Variation 4
3982 User Data_49.LONG_1 None SelectOperate Variation 1 Variation 1
3983 User Data_49.LONG_2 None SelectOperate Variation 1 Variation 1
3984 User Data_49.LONG_3 None SelectOperate Variation 1 Variation 1
DNP3 Data Point List 213
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
3985 User Data_49.LONG_4 None SelectOperate Variation 1 Variation 1
3986 User Data_49.LONG_5 None SelectOperate Variation 1 Variation 1
3987 User Data_49.LONG_6 None SelectOperate Variation 1 Variation 1
3988 User Data_49.LONG_7 None SelectOperate Variation 1 Variation 1
3989 User Data_49.LONG_8 None SelectOperate Variation 1 Variation 1
3990 User Data_49.LONG_9 None SelectOperate Variation 1 Variation 1
3991 User Data_49.LONG_10 None SelectOperate Variation 1 Variation 1
3992 User Data_49.SHORT_1 None SelectOperate Variation 2 Variation 2
3993 User Data_49.SHORT_2 None SelectOperate Variation 2 Variation 2
3994 User Data_49.SHORT_3 None SelectOperate Variation 2 Variation 2
3995 User Data_49.SHORT_4 None SelectOperate Variation 2 Variation 2
3996 User Data_49.SHORT_5 None SelectOperate Variation 2 Variation 2
3997 User Data_49.SHORT_6 None SelectOperate Variation 2 Variation 2
3998 User Data_49.SHORT_7 None SelectOperate Variation 2 Variation 2
3999 User Data_49.SHORT_8 None SelectOperate Variation 2 Variation 2
4000 User Data_49.SHORT_9 None SelectOperate Variation 2 Variation 2
4001 User Data_49.SHORT_10 None SelectOperate Variation 2 Variation 2
4002 User Data_49.BYTE_1 None SelectOperate Variation 2 Variation 2
4003 User Data_49.BYTE_2 None SelectOperate Variation 2 Variation 2
4004 User Data_49.BYTE_3 None SelectOperate Variation 2 Variation 2
4005 User Data_49.BYTE_4 None SelectOperate Variation 2 Variation 2
4006 User Data_49.BYTE_5 None SelectOperate Variation 2 Variation 2
4007 User Data_49.BYTE_6 None SelectOperate Variation 2 Variation 2
4008 User Data_49.BYTE_7 None SelectOperate Variation 2 Variation 2
4009 User Data_49.BYTE_8 None SelectOperate Variation 2 Variation 2
4010 User Data_49.BYTE_9 None SelectOperate Variation 2 Variation 2
4011 User Data_49.BYTE_10 None SelectOperate Variation 2 Variation 2
4012 User Data_50.FLOAT_1 None SelectOperate Variation 3 Variation 3
4013 User Data_50.FLOAT_2 None SelectOperate Variation 3 Variation 3
4014 User Data_50.FLOAT_3 None SelectOperate Variation 3 Variation 3
4015 User Data_50.FLOAT_4 None SelectOperate Variation 3 Variation 3
4016 User Data_50.FLOAT_5 None SelectOperate Variation 3 Variation 3
214 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
4017 User Data_50.FLOAT_6 None SelectOperate Variation 3 Variation 3
4018 User Data_50.FLOAT_7 None SelectOperate Variation 3 Variation 3
4019 User Data_50.FLOAT_8 None SelectOperate Variation 3 Variation 3
4020 User Data_50.FLOAT_9 None SelectOperate Variation 3 Variation 3
4021 User Data_50.FLOAT_10 None SelectOperate Variation 3 Variation 3
4022 User Data_50.FLOAT_11 None SelectOperate Variation 3 Variation 3
4023 User Data_50.FLOAT_12 None SelectOperate Variation 3 Variation 3
4024 User Data_50.FLOAT_13 None SelectOperate Variation 3 Variation 3
4025 User Data_50.FLOAT_14 None SelectOperate Variation 3 Variation 3
4026 User Data_50.FLOAT_15 None SelectOperate Variation 3 Variation 3
4027 User Data_50.FLOAT_16 None SelectOperate Variation 3 Variation 3
4028 User Data_50.FLOAT_17 None SelectOperate Variation 3 Variation 3
4029 User Data_50.FLOAT_18 None SelectOperate Variation 3 Variation 3
4030 User Data_50.FLOAT_19 None SelectOperate Variation 3 Variation 3
4031 User Data_50.FLOAT_20 None SelectOperate Variation 3 Variation 3
4032 User Data_50.DOUBLE_1 None SelectOperate Variation 4 Variation 4
4033 User Data_50.DOUBLE_2 None SelectOperate Variation 4 Variation 4
4034 User Data_50.DOUBLE_3 None SelectOperate Variation 4 Variation 4
4035 User Data_50.DOUBLE_4 None SelectOperate Variation 4 Variation 4
4036 User Data_50.DOUBLE_5 None SelectOperate Variation 4 Variation 4
4037 User Data_50.DOUBLE_6 None SelectOperate Variation 4 Variation 4
4038 User Data_50.DOUBLE_7 None SelectOperate Variation 4 Variation 4
4039 User Data_50.DOUBLE_8 None SelectOperate Variation 4 Variation 4
4040 User Data_50.DOUBLE_9 None SelectOperate Variation 4 Variation 4
4041 User Data_50.DOUBLE_10 None SelectOperate Variation 4 Variation 4
4042 User Data_50.LONG_1 None SelectOperate Variation 1 Variation 1
4043 User Data_50.LONG_2 None SelectOperate Variation 1 Variation 1
4044 User Data_50.LONG_3 None SelectOperate Variation 1 Variation 1
4045 User Data_50.LONG_4 None SelectOperate Variation 1 Variation 1
4046 User Data_50.LONG_5 None SelectOperate Variation 1 Variation 1
4047 User Data_50.LONG_6 None SelectOperate Variation 1 Variation 1
4048 User Data_50.LONG_7 None SelectOperate Variation 1 Variation 1
DNP3 Data Point List 215
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Supported Group 20 Group 22
Point Default Control Default Default
Index Tag Mapped Class Operations Variation Variation
4049 User Data_50.LONG_8 None SelectOperate Variation 1 Variation 1
4050 User Data_50.LONG_9 None SelectOperate Variation 1 Variation 1
4051 User Data_50.LONG_10 None SelectOperate Variation 1 Variation 1
4052 User Data_50.SHORT_1 None SelectOperate Variation 2 Variation 2
4053 User Data_50.SHORT_2 None SelectOperate Variation 2 Variation 2
4054 User Data_50.SHORT_3 None SelectOperate Variation 2 Variation 2
4055 User Data_50.SHORT_4 None SelectOperate Variation 2 Variation 2
4056 User Data_50.SHORT_5 None SelectOperate Variation 2 Variation 2
4057 User Data_50.SHORT_6 None SelectOperate Variation 2 Variation 2
4058 User Data_50.SHORT_7 None SelectOperate Variation 2 Variation 2
4059 User Data_50.SHORT_8 None SelectOperate Variation 2 Variation 2
4060 User Data_50.SHORT_9 None SelectOperate Variation 2 Variation 2
4061 User Data_50.SHORT_10 None SelectOperate Variation 2 Variation 2
4062 User Data_50.BYTE_1 None SelectOperate Variation 2 Variation 2
4063 User Data_50.BYTE_2 None SelectOperate Variation 2 Variation 2
4064 User Data_50.BYTE_3 None SelectOperate Variation 2 Variation 2
4065 User Data_50.BYTE_4 None SelectOperate Variation 2 Variation 2
4066 User Data_50.BYTE_5 None SelectOperate Variation 2 Variation 2
4067 User Data_50.BYTE_6 None SelectOperate Variation 2 Variation 2
4068 User Data_50.BYTE_7 None SelectOperate Variation 2 Variation 2
4069 User Data_50.BYTE_8 None SelectOperate Variation 2 Variation 2
4070 User Data_50.BYTE_9 None SelectOperate Variation 2 Variation 2
4071 User Data_50.BYTE_10 None SelectOperate Variation 2 Variation 2
216 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
4.9 Strings: DNP3 Object Group 110 (Static)
4.9.1 DNP3 Object Group 110: Octet Strings (Static)
This group can be read with all variations.
Point Index Tag Mapped Default Class Assigned
0 RESERVED Class_None
1 System_1.PROD_DESC Class_None
2 System_1.SITE_NAME Class_None
3 Module_1.APP_VER Class_None
4 Module_1.BOOT_VER Class_None
5 Module_1.IFS_VER Class_None
6 DP Mtr_1.DESC Class_None
7 DP Mtr_1.STATION_OBJ Class_None
8 DP Mtr_2.DESC Class_None
9 DP Mtr_2.STATION_OBJ Class_None
10 DP Mtr_3.DESC Class_None
11 DP Mtr_3.STATION_OBJ Class_None
12 DP Mtr_4.DESC Class_None
13 DP Mtr_4.STATION_OBJ Class_None
14 DP Mtr_5.DESC Class_None
15 DP Mtr_5.STATION_OBJ Class_None
16 DP Mtr_6.DESC Class_None
17 DP Mtr_6.STATION_OBJ Class_None
18 DP Mtr_7.DESC Class_None
19 DP Mtr_7.STATION_OBJ Class_None
20 DP Mtr_8.DESC Class_None
21 DP Mtr_8.STATION_OBJ Class_None
22 DP Mtr_9.DESC Class_None
23 DP Mtr_9.STATION_OBJ Class_None
24 DP Mtr_10.DESC Class_None
25 DP Mtr_10.STATION_OBJ Class_None
26 DP Mtr_11.DESC Class_None
27 DP Mtr_11.STATION_OBJ Class_None
28 DP Mtr_12.DESC Class_None
29 DP Mtr_12.STATION_OBJ Class_None
DNP3 Data Point List 217
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Point Index Tag Mapped Default Class Assigned
30 DP Mtr_13.DESC Class_None
31 DP Mtr_13.STATION_OBJ Class_None
32 DP Mtr_14.DESC Class_None
33 DP Mtr_14.STATION_OBJ Class_None
34 DP Mtr_15.DESC Class_None
35 DP Mtr_15.STATION_OBJ Class_None
36 DP Mtr_16.DESC Class_None
37 DP Mtr_16.STATION_OBJ Class_None
38 DP Mtr_17.DESC Class_None
39 DP Mtr_17.STATION_OBJ Class_None
40 DP Mtr_18.DESC Class_None
41 DP Mtr_18.STATION_OBJ Class_None
42 DP Mtr_19.DESC Class_None
43 DP Mtr_19.STATION_OBJ Class_None
44 DP Mtr_20.DESC Class_None
45 DP Mtr_20.STATION_OBJ Class_None
46 DP Mtr_21.DESC Class_None
47 DP Mtr_21.STATION_OBJ Class_None
48 DP Mtr_22.DESC Class_None
49 DP Mtr_22.STATION_OBJ Class_None
50 DP Mtr_23.DESC Class_None
51 DP Mtr_23.STATION_OBJ Class_None
52 DP Mtr_24.DESC Class_None
53 DP Mtr_24.STATION_OBJ Class_None
54 Linear Mtr_1.DESC Class_None
55 Linear Mtr_1.STATION_OBJ Class_None
56 Linear Mtr_2.DESC Class_None
57 Linear Mtr_2.STATION_OBJ Class_None
58 Linear Mtr_3.DESC Class_None
59 Linear Mtr_3.STATION_OBJ Class_None
60 Linear Mtr_4.DESC Class_None
61 Linear Mtr_4.STATION_OBJ Class_None
62 Linear Mtr_5.DESC Class_None
63 Linear Mtr_5.STATION_OBJ Class_None
218 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Point Index Tag Mapped Default Class Assigned
64 Linear Mtr_6.DESC Class_None
65 Linear Mtr_6.STATION_OBJ Class_None
66 Linear Mtr_7.DESC Class_None
67 Linear Mtr_7.STATION_OBJ Class_None
68 Linear Mtr_8.DESC Class_None
69 Linear Mtr_8.STATION_OBJ Class_None
70 Linear Mtr_9.DESC Class_None
71 Linear Mtr_9.STATION_OBJ Class_None
72 Linear Mtr_10.DESC Class_None
73 Linear Mtr_10.STATION_OBJ Class_None
74 Linear Mtr_11.DESC Class_None
75 Linear Mtr_11.STATION_OBJ Class_None
76 Linear Mtr_12.DESC Class_None
77 Linear Mtr_12.STATION_OBJ Class_None
78 Linear Mtr_13.DESC Class_None
79 Linear Mtr_13.STATION_OBJ Class_None
80 Linear Mtr_14.DESC Class_None
81 Linear Mtr_14.STATION_OBJ Class_None
82 Linear Mtr_15.DESC Class_None
83 Linear Mtr_15.STATION_OBJ Class_None
84 Linear Mtr_16.DESC Class_None
85 Linear Mtr_16.STATION_OBJ Class_None
86 Linear Mtr_17.DESC Class_None
87 Linear Mtr_17.STATION_OBJ Class_None
88 Linear Mtr_18.DESC Class_None
89 Linear Mtr_18.STATION_OBJ Class_None
90 Linear Mtr_19.DESC Class_None
91 Linear Mtr_19.STATION_OBJ Class_None
92 Linear Mtr_20.DESC Class_None
93 Linear Mtr_20.STATION_OBJ Class_None
94 Linear Mtr_21.DESC Class_None
95 Linear Mtr_21.STATION_OBJ Class_None
96 Linear Mtr_22.DESC Class_None
97 Linear Mtr_22.STATION_OBJ Class_None
DNP3 Data Point List 219
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Point Index Tag Mapped Default Class Assigned
98 Linear Mtr_23.DESC Class_None
99 Linear Mtr_23.STATION_OBJ Class_None
100 Linear Mtr_24.DESC Class_None
101 Linear Mtr_24.STATION_OBJ Class_None
102 Liq LinMtr_1.DESC Class_None
103 Liq LinMtr_1.STATION_OBJ Class_None
104 Liq LinMtr_2.DESC Class_None
105 Liq LinMtr_2.STATION_OBJ Class_None
106 Liq LinMtr_3.DESC Class_None
107 Liq LinMtr_3.STATION_OBJ Class_None
108 Liq LinMtr_4.DESC Class_None
109 Liq LinMtr_4.STATION_OBJ Class_None
110 Liq LinMtr_5.DESC Class_None
111 Liq LinMtr_5.STATION_OBJ Class_None
112 Liq LinMtr_6.DESC Class_None
113 Liq LinMtr_6.STATION_OBJ Class_None
114 Liq LinMtr_7.DESC Class_None
115 Liq LinMtr_7.STATION_OBJ Class_None
116 Liq LinMtr_8.DESC Class_None
117 Liq LinMtr_8.STATION_OBJ Class_None
118 Liq LinMtr_9.DESC Class_None
119 Liq LinMtr_9.STATION_OBJ Class_None
120 Liq LinMtr_10.DESC Class_None
121 Liq LinMtr_10.STATION_OBJ Class_None
122 Liq LinMtr_11.DESC Class_None
123 Liq LinMtr_11.STATION_OBJ Class_None
124 Liq LinMtr_12.DESC Class_None
125 Liq LinMtr_12.STATION_OBJ Class_None
126 Liq LinMtr_13.DESC Class_None
127 Liq LinMtr_13.STATION_OBJ Class_None
128 Liq LinMtr_14.DESC Class_None
129 Liq LinMtr_14.STATION_OBJ Class_None
130 Liq LinMtr_15.DESC Class_None
131 Liq LinMtr_15.STATION_OBJ Class_None
220 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Point Index Tag Mapped Default Class Assigned
132 Liq LinMtr_16.DESC Class_None
133 Liq LinMtr_16.STATION_OBJ Class_None
134 Liq LinMtr_17.DESC Class_None
135 Liq LinMtr_17.STATION_OBJ Class_None
136 Liq LinMtr_18.DESC Class_None
137 Liq LinMtr_18.STATION_OBJ Class_None
138 Liq LinMtr_19.DESC Class_None
139 Liq LinMtr_19.STATION_OBJ Class_None
140 Liq LinMtr_20.DESC Class_None
141 Liq LinMtr_20.STATION_OBJ Class_None
142 Liq LinMtr_21.DESC Class_None
143 Liq LinMtr_21.STATION_OBJ Class_None
144 Liq LinMtr_22.DESC Class_None
145 Liq LinMtr_22.STATION_OBJ Class_None
146 Liq LinMtr_23.DESC Class_None
147 Liq LinMtr_23.STATION_OBJ Class_None
148 Liq LinMtr_24.DESC Class_None
149 Liq LinMtr_24.STATION_OBJ Class_None
150 Station_1.DESC Class_None
151 Station_2.DESC Class_None
152 Station_3.DESC Class_None
153 Station_4.DESC Class_None
154 Station_5.DESC Class_None
155 Station_6.DESC Class_None
156 Station_7.DESC Class_None
157 Station_8.DESC Class_None
158 Station_9.DESC Class_None
159 Station_10.DESC Class_None
160 Station_11.DESC Class_None
161 Station_12.DESC Class_None
162 Station_13.DESC Class_None
163 Station_14.DESC Class_None
164 Station_15.DESC Class_None
165 Station_16.DESC Class_None
DNP3 Data Point List 221
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Point Index Tag Mapped Default Class Assigned
166 Station_17.DESC Class_None
167 Station_18.DESC Class_None
168 Station_19.DESC Class_None
169 Station_20.DESC Class_None
170 Station_21.DESC Class_None
171 Station_22.DESC Class_None
172 Station_23.DESC Class_None
173 Station_24.DESC Class_None
174 AppInfo_1. PACK_NAME Class_None
175 AppInfo_1. PACK_VER Class_None
176 AppInfo_2. PACK_NAME Class_None
177 AppInfo_2. PACK_VER Class_None
178 AppInfo_3. PACK_NAME Class_None
179 AppInfo_3. PACK_VER Class_None
180 AppInfo_4. PACK_NAME Class_None
181 AppInfo_4. PACK_VER Class_None
182 AppInfo_5. PACK_NAME Class_None
183 AppInfo_5. PACK_VER Class_None
184 AppInfo_6. PACK_NAME Class_None
185 AppInfo_6. PACK_VER Class_None
186 AppInfo_7. PACK_NAME Class_None
187 AppInfo_7. PACK_VER Class_None
188 AppInfo_8. PACK_NAME Class_None
189 AppInfo_8. PACK_VER Class_None
222 DNP3 Data Point List
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5. Object Parameter Listing
This chapter provides tables describing the measurement types and parameters for each
DNP3 object.
5.1 Measurement Types
Table 5-1 details the unit codes associated with each measurement type. Depending on
the data type, the unit code type associated with a parameter (or an instance of a
parameter) can appear as a number in parentheses in the Default Measurement Type
column.
▪ For Data Type ENUM16, the description of the Measurement Type appears as a
number in parentheses [here, (30)] after the value in the Default Measurement Type
column and the unit code number – which correlates to the Units column in Table 5-1
– appears as a number in parentheses [here, (0)] after the value in the Default
column:
▪ For other data types (such as DOUBLE, FLOAT, or UINT), the description of the
Measurement Type appears in the Default Measurement Type column as two
numbers separated by a hyphen [here, (12-7)]. The value before the hyphen correlates
to the value in the Type column of Table 5-1 and the value after the hyphen correlates
to the unit code for that specific type (that is, Type 12 and Unit 7):
▪ Finally, for some parameters/data types, the Default Measurement Type is blank,
indicating that the Default Measurement Type is not applicable:
Object Parameter Listing 223
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Table 5-1. Measurement Types
Type Description Units
0 Unitless
1 Differential Pressure Display 0 = inH2O
1 = inH2O
2 = kPa
3 = mbar
4 = kg/cm²
5 = psi
6 = bar
2 Absolute Pressure 0 = psi(a)
1 = kPa(a)
2 = MPa(a)
3 = bar(a)
4 = kg/cm²(a)
3 Temperature 0 = °F
1 = °C
2=K
4 Gas Density 0 = lb/ft³
1 = kg/m³
2 = g/cc
3 = lb/MMCF
4 = lb/US gal
5 =kg/L
6 = lb/bbl
7 = RD
8 = °API
5 Volume Heating Value 0 = Btu/ft³
1 = MJ/m³
6 Dynamic Viscosity 0 = cP
1 = lb/ft-s
7 Linear (Short) 0 = in
1 = mm
8 Linear (Long) 0 = ft
1=m
9 Gas Volume Total 0 = ft³
1 = m³
2 = MCF
3 = (k)m³
4 = MMCF
5 = BCF
6=L
7 = US gal
8 = bbl
10 Mass Total 0 = lb
1 = kg
2 = Mlb
3 = tonne
4 = ton
224 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Type Description Units
11 Energy Total 0 = Btu
1 = MMBtu
2=J
3 = MJ
4 = GJ
5 = Dth
6 = TJ
7 = PJ
12 Gas Volume Rate 0 = ft³/s
1 = ft³/min
2 = ft³/h
3 = ft³/d
4 = MCF/s
5 = MCF/min
6 = MCF/h
7 = MCF/d
8 = m³/s
9 = m³/min
10 = m³/h
11 = m³/d
12 = (k)m³/s
13 = (k)m³/min
14 = (k)m³/h
15 = (k)m³/d
16 = MMCF/s
17 = MMCF/min
18 = MMCF/h
19 = MMCF/d
20 = BCF/s
21 = BCF/min
22 = BCF/h
23 = BCF/d
24 = L/s
25 = L/min
26 = L/h
27 = L/d
28 = US gal/s
29 = US gal/min
30 = US gal/h
31 = US gal/d
32 = bbl/s
33 = bbl/min
34 = bbl/h
35 = bbl/d
13 Mass Rate 0 = lb/s
1 = lb/min
2 = lb/h
3 = lb/d
4 = Mlb/s
5 = Mlb/min
Object Parameter Listing 225
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Type Description Units
6 = Mlb/h
7 = Mlb/d
8 = kg/s
9 = kg/min
10 = kg/h
11 = kg/d
12 = tonne/s
13 = tonne/min
14 = tonne/h
15 = tonne/d
16 = ton/s
17 = ton/min
18 = ton/h
19 = ton/d
14 Energy Rate 0 = Btu/s
1 = Btu/min
2 = Btu/h
3 = Btu/d
4 = MMBtu/s
5 = MMBtu/min
6 = MMBtu/h
7 = MMBtu/d
8 = J/s
9 = J/min
10 = J/h
11 = J/d
12 = MJ/s
13 = MJ/min
14 = MJ/h
15 = MJ/d
16 = GJ/s
17 = GJ/min
18 = GJ/h
19 = GJ/d
20 = Dth/s
21 = Dth/min
22 = Dth/h
23 = Dth/d
24 = TJ/s
25 = TJ/min
26 = TJ/h
27 = TJ/d
28 = PJ/s
29 = PJ/min
30 = PJ/h
31 = PJ/d
15 Current 0 = mA
1 =A
16 Voltage 0=V
1 = kV
226 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Type Description Units
17 Duration 0=s
1 = min
2=h
3=d
18 Ratio 0=%
1 = RESERVED
2 = ppm
19 Acceleration 0 = ft/s²
1= m/s²
20 Latitude 0=°
21 Water Content 0 = lb/MMSCF
1 = kg/(k)m³
22 Joule-Thompson Coefficient 0 = °F/psi
1 = K/bar
2 = K/kPa
3 = °C/bar
4 = °C/kPa
5 = K/MPa
23 Resistance 0 = ohms
24 Frequency 0 = Hz
25 Molar Mass 0 = lb/lb-mol
1 = kg/kmol
2 = g/mol
26 Differential Pressure Selection 0 = inH2O@60°F
1 = inH2O@68°F
2 = kPa
3 = mbar
4 = kg/cm²
5 = psi
6 = bar
27 Volumetric K-factor 0 = pulses/ft³
1 = pulses/m³
2 = pulses/US gal
3 = pulses/bbl
28 Mass K-factor 0 = pulses/lb
1 = pulses/kg
29 Gauge Pressure 0 = psi(g)
1 = kPa(g)
2 = MPa(g)
3 = bar(g)
4 = kg/cm²(g)
30 Enable/Disable Selection 0 = Disable
1 = Enable
31 User Selection 0 = Live
1 = Override
Object Parameter Listing 227
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Type Description Units
32 Fault Selection 0 = Live/Download
1 = Fault
2 = Last Good
3 = Last Hour Average
33 Composite System Integrity 0 = Normal
1 = Alarm
2 = Fault
34 Day of Week 0 = Sunday
1 = Monday
2 = Tuesday
3 = Wednesday
4 = Thursday
5 = Friday
6 = Saturday
35 Date Format Selection 0 = MM/DD/YY
1 = MM/DD/YYYY
2 = DD/MM/YY
3 = DD/MM/YYYY
4 = YYYY/MM/DD
5 = YY/MM/DD
36 Time Format Selection 0 = 12 Hour
1 = 24 Hour
37 Language Selection 0 = English
38 Port Owner 0 = Debug
1 = DNP3/Modbus Slave
2 = DNP3
3 = Modbus Slave
4 = Modbus Master
5 = BSAP
6 = ROC
7 = MVS4088B
8 = HART Slave
9 = MVT3808/3508
39 Baud Rate 0 = 1200
1 = 2400
2 = 4800
3 = 9600
4 = 19.2K
5 = 38.4K
6 = 57.6K
7 = 115.2K
40 Serial Settings 0 = 7 data bits; odd parity; 1 stop bit
1 = 7 data bits; even parity; 1 stop bit
2 = 8 data bits; no parity; 1 stop bit
3 = 8 data bits; odd parity; 1 stop bit
4 = 8 data bits; even parity; 1 stop bit
41 IPv4 Address 0 = IPv4
42 48-Bit MAC Address 0 = 48-bit
228 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Type Description Units
43 History Type 0 = Average
1 = Total / Difference
2 = Snapshot
3 = Minimum
4 = Maximum
5 = Integration
44 Alarm Status DP SP 0 = Normal
1 = Not Licensed
2 = Instance Inactive
3 = Comm Fail
4 = Override Active
5 = In Alarm
6 = Point Fail
7 = Above URL
8 = Below LRL
9 = Input Frozen
45 Composite Status Alarm 0 = Normal
1 = Low
2 = Low Low
3 = High
4 = High High
5 = Rate of Change
6 = Point Fail
46 Discrete Output Type 0 = Latching
1 = Momentary
2 = Toggle
3 = Time Duration Output Momentary
4 = Time Duration Output Toggle
5 = Scaled Pulse Output
47 Output Mode 0 = Manual
1 = Auto
48 Output Action on Power Cycle 0 = Last
1 = Fault
49 CVD Curve Selection 0 = User
1 = Alpha 0.00385 DIN/IEC
2 = Alpha 0.00392
50 Meter Type Selection 0 = AGA3 Orifice (Flange Taps)
1 = ISO5167 Orifice (Flange Taps)
2 = ISO5167 Orifice (Corner Taps)
3 = ISO5167 Orifice (D & D/2 Taps)
4 = ISO5167 Venturi (As Cast)
5 = ISO5167 Venturi (Machined)
6 = ISO5167 Venturi (Rough Weld)
7 = ISO5167 Nozzle (Venturi)
8 = ISO5167 Nozzle (Long Radius)
9 = ISO5167 Nozzle (ISA 1932)
10 = 1595 Conditioning Orifice (Flange)
11 = 1595 Conditioning Orifice (D and D/2)
12 = 405C Compact Orifice
Object Parameter Listing 229
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Type Description Units
13 = Cone (McCrometer V-Cone)
14 = Cone (McCrometer Wafer-Cone)
15 = Cone (NUFLO)
51 AGA 3 Calculation Method 0 = AGA3 1992 Volume
1 = AGA3 1992 Mass
2 = AGA3 1992 Relative Density
3 = AGA3 2013 Volume
4 = AGA3 2013 Mass
5 = AGA3 2013 Relative Density
52 ISO 5167 Calculation Method 0 = ISO5167 1991
1 = ISO5167 1998
2 = ISO5167 2003
53 Linear Meter Type 0 = Turbine
1 = Coriolis
2 = Auto-Adjust
3 = Ultrasonic
4 = Positive Displacement
54 Density/Compress Calc Selection 0 = AGA8 1994 Detailed
1 = AGA8 1994 Gross 1
2 = AGA8 1994 Gross 2
3 = ISO12213-2 2009
4 = SGERG 1991 CV/RD/CO2/H2 (Std)
5 = SGERG 1991 CV/RD/N2/H2
6 = SGERG 1991 RD/N2/CO2/H2)
7 = SGERG 1991 CV/N2/CO2/H2)
8 = ISO12213-3 2006 CV/RD/CO2/H2 (Pref)
9 = ISO12213-3 2006 N2/CV/RD/H2 (Set B)
10 = ISO12213-3 2006 N2/CO2/RD/H2 (Set C)
11 = ISO12213-3 2006 NS/CO2/CV/H2 (Set D)
12 = NX-19 1962 (Z VDI/VDE)
13 = NX-19 Mod
14 = NX-19 VDI/VDE
15 = AGA8 Part 1 2017 Detailed
16 = RESERVED
17 = AGA8 Part 1 2017 Gross 1
18 – AGA8 Part 1 2017 Gross 2
19 = AGA8 Part 1 2017/GERG 2008
20 = NX-19 (Z Miller)
55 Heating Value Calculation Selection 0 = GPA2172 2009 Gross
1 = ISO6976 1995 Superior
2 = ISO6976 1995 Inferior
3 – (AGA5 2009 Gross)
4 – (AGA5 2009 Net)
56 Heating Value Combustion Reference 0 = 60°F
1 = 0°C
2 = 15°C
3 = 20°C
4 = 25°C
57 SP Type Selection 0 = Gauge
230 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Type Description Units
1 = Absolute
58 Pressure Location 0 = Upstream
1 = Downstream
59 Material Selection 0 = Carbon Steel
1 = 304 Stainless Steel
2 = 316 Stainless Steel
3 = Generic Stainless
4 = Monel 400
5 = User Entered Alpha
60 Modbus Mode Selection 0 = ASCII
1 = RTU
2 = TCP
61 Modbus Byte Order Selection 0 = LSB
1 = MSB
62 Modbus 4-byte Types 0 = 1 Register
1 = 2 Register 0-1-2-3
2 = 2 Register 1-0-3-2
3 = 2 Register 2-3-0-1
4 = 2 Register 3-2-1-0
63 Modbus 8-byte Types 0 = 1 Register
1 = 4 Register 0-1-2-3-4-5-6-7
2 = 4 Register 2-3-0-1-6-7-4-5
3 = 4 Register 4-5-6-7-0-1-2-3
4 = 4 Register 6-7-4-5-3-2-0-1
5 = 4 Register 1-0-3-2-5-4-7-6
6 = 4 Register 3-2-1-0-7-6-5-4
7 = 4 Register 5-4-7-6-1-0-3-2
8 = 4 Register 7-6-5-4-3-2-1-0
64 Data Type Select 0 = Unknown
65 Calculation Fault Option 0 = Alarm Disabled
1 = Alarm and Continue
2 = Alarm and Halt Calculation
66 Remote Data Types 0 = No Conversion
1 = UINT8
2 = INT8
3 = UINT16
4 = INT16
5 = UINT32 (2 Registers 0-1-2-3)
6 = UINT32 (2 Registers 1-0-3-2)
7 = UINT32 (2 Registers 2-3-0-1)
8 = UINT32 (2 Registers 3-2-1-0)
9 = INT32 (2 Registers 0-1-2-3)
10 = INT32 (2 Registers 1-0-3-2)
11 = INT32 (2 Registers 2-3-0-1)
12 = INT32 (2 Registers 3-2-1-0)
13 = UINT64 (4 Registers 0-1-2-3-4-5-6-7)
14 = UINT64 (4 Registers 2-3-0-1-6-7-4-5)
15 = UINT64 (4 Registers 4-5-6-7-0-1-2-3)
Object Parameter Listing 231
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Type Description Units
16 = UINT64 (4 Registers 6-7-4-5-2-3-0-1)
17 = UINT64 (4 Registers 1-0-3-2-5-4-7-6)
18 = UINT64 (4 Registers 3-2-1-0-7-6-5-4)
19 = UINT64 (4 Registers 5-4-7-6-1-0-3-2)
20 = UINT64 (4 Registers 7-6-5-4-3-2-1-0)
21 = INT64 (4 Registers 0-1-2-3-4-5-6-7)
22 = INT64 (4 Registers 2-3-0-1-6-7-4-5)
23 = INT64 (4 Registers 4-5-6-7-0-1-2-3)
24 = INT64 (4 Registers 6-7-4-5-2-3-0-1)
25 = INT64 (4 Registers 1-0-3-2-5-4-7-6)
26 = INT64 (4 Registers 3-2-1-0-7-6-5-4)
27 = INT64 (4 Registers 5-4-7-6-1-0-3-2)
28 = INT64 (4 Registers 7-6-5-4-3-2-1-0)
29 = FLOAT (2 Registers 0-1-2-3)
30 = FLOAT (2 Registers 1-0-3-2)
31 = FLOAT (2 Registers 2-3-0-1)
32 = FLOAT (2 Registers 3-2-1-0)
33 = DOUBLE (4 Registers 0-1-2-3-4-5-6-7)
34 = DOUBLE (4 Registers 2-3-0-1-6-7-4-5)
35 = DOUBLE (4 Registers 4-5-6-7-0-1-2-3)
36 = DOUBLE (4 Registers 6-7-4-5-2-3-0-1)
37 = DOUBLE (4 Registers 1-0-3-2-5-4-7-6)
38 = DOUBLE (4 Registers 3-2-1-0-7-6-5-4)
39 = DOUBLE (4 Registers 5-4-7-6-1-0-3-2)
40 = DOUBLE (4 Registers 7-6-5-4-3-2-1-0)
41 = SINGLE REGISTER FLOATING POINT
42 = SINGLE REGISTER DOUBLE
43 = SINGLE REGISTER INT32
44 = SINGLE REGISTER UINT32
45 = SINGLE REGISTER INT64
46 = SINGLE REGISTER UINT64
47 = STRING (10 Characters)
48 = STRING (20 Characters)
49 = STRING (30 Characters)
50 = STRING (40 Characters)
67 Normalization Type 0 = None
1 = Full Normalization
2 = Methane Adjust
68 Port Type 0 = Serial
1 = Ethernet
2 = WiFi
3= USB
69 Serial Port Mode 0 = RS-232
1 = RS-485 2-Wire (No Termination)
2 = RS-485 2-Wire (Terminated)
3 = RS-485 4-Wire (No Termination)
4 = RS-485 4-Wire (Terminated)
70 H20 Content Basis 0 = Dry
1 = Saturated at Base Conditions
2 = RESERVED
232 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Type Description Units
3 = Partially Saturated
71 Averaging Type 0 = Linear
1 = Flow Dependent Linear
72 Battery Type 0 = None
1 = Lithium
2 = Lead Acid
3 = Not Applicable
73 Fluid Type 0 = Natural Gas
1 = Liquid
74 Base Temperature 0 = User
1 = 60°F
2 = 15°C
3 = 20°C
4 = 30°C
5 = 0°C
75 Water Content Calc Standard 0 = IGT Bulletin 8
76 RESERVED 0 = RESERVED
77 Annubar Calc Selection 0 = 485-1
1 = 485-2
2 = 485-3
78 Pressure 0 = psi
1 = kPa
2 = MPa
3 = bar
4 = kg/cm²
79 User Mode Selection 1 0 = Measured
1 = Override
2 = Calculated
80 Object Status 0 = Normal
1 = In Alarm
2 = Failure
3 = Override
4 = Inactive
82 Live Trigger 0 = No Action
1 = Accept Composition
83 RTD Type 0 = 2-wire
1 = 3-wire
2 = 4-wire
84 History Group Type 0 = General History
1 = Meter History
2 = User Periodic
85 Sensor Configuration 0 = Standard Coplanar
1 = Standard Threaded
2 = Level Coplanar
3 = Reference Class Coplanar
4 = High Temp Conventional
Object Parameter Listing 233
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Type Description Units
5-251 = RESERVED
252 = Unknown
86 Sensor Type 0 = Dual Variable
1 = DP Only
2 = SP Only
87 Status Pressure Type 0 = No Static Pressure
1 = Absolute
2 = Gauge
88 RMT Sensor Range 0 = Range 0
1 = Range 1
2 = Range 2
3 = Range 3
4 = Range 4
5 = Range 5
6 = Range 6
7 = Range 7
8 = Range 8
9 = Range 9
10 = Range 10
11-252 = RESERVED
253 = Special
89 Flange Type 0-11 = RESERVED
12 = Traditional
13 = Coplanar
14 = Remote Seal
15 = Level; 3in; 150lb
16 = Level; 4in; 150lb
17 = Level; 3in; 300lb
18 = Level; 4in; 300lb
19 = Level; DN 80; PN 40
20 = Level; DN 100; PN 40
21 = Level; DN 100; PN 10/16
22 = Level; 2 in; 150lb
23 = Level; 2in; 300lb
24 = Level; DN 50; PN 6
25 = Level; DN 50; PN 40
26-43 = RESERVED
44 = 1/2in; NPTF
45 = DIN16288G 1/2 A male
46 = 1/4in; NPTF
47-239 = RESERVED
240 = Auto Clave F-250-C
241 = Tri-Clamp
242 = Fractional Line Fit
243 = 1/8in; NPTF
244 = VCR
245 = PMC
246 = Traditional RC 1/4
247 = Traditional RC 1/2
248-251 = RESERVED
234 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Type Description Units
252 = Unknown
253 = Special
90 Sensor Material 0 = Carbon Steel
1 = Undefined
2 = 316 Stainless Steel
3 = Hastelloy® C
4 = Monel
5 = Tantalum
6-14 = RESERVED
15 = Gold Monel
16-23 = RESERVED
24 = Kynar®
25 = Gold Monel
26-29 = RESERVED
30 = Hastelloy® C276
31-33 = RESERVED
34 = PTFE Coated 316L SST
35 = Gold-plated Hastelloy C276
36-238 = RESERVED
239 = Monel 400
240-250 = RESERVED
251 = None
252 = Unknown
253 = Special
91 O-ring Material 0-9 = RESERVED
10 = PTFE (Teflon® R)
11 = Viton
13 = Ethyl-Prop
14-35 = RESERVED
36 = PTFE Glass
37 = PTFE Graphite
38-250 = RESERVED
251 = None
252 = Unknown
253 = Special
92 Fill Fluid 0 = Undefined
1 = Silicone
2 = Inert
3-6 = RESERVED
7 = NEOBEE® M-20
8-251 = RESERVED
252 = Unknown
253 = Special
93 Product Type 0 = FB1100
1 = FB1200
2 = FB2100
3 = FB2200
4 = FB3000
5 = I/O Scanner
Object Parameter Listing 235
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Type Description Units
94 Heavy Gas Mode 0 = Disabled
1 = C6+
2 = C7+
3 = C8+
4 = C9+
95 WiFiSecurity Option 0 = Open
1 = WPA-2
96 Cd/Fc Curve Option 0 = Disabled
1 = Cd vs Re Curve
2 = Fc vs Flow Curve
97 User Mode Selection 2 0 = RESERVED
1 = Override
2 = Calculated
98 User Mode Selection 3 0 = Measured
1 = Override
2 = Calculated
3 = Remote Download
99 Actual Mode 0 = Measured
1 = Override
2 = Calculated
3 = Remote Download
4 = Fault
100 Alarm Type 0 = Low
1 = Low Low
2 = High
3 = High High
4 = Rate of Change
5 = User Account Locked
6 = Log Full Limit Exceeded
7 = Log Nearly Full Limit Exceeded
8 = Log Integrity Failure
9 = Battery Status
10 = Low Voltage
11 = Override
12 = Point Fail
13 = Digital ON Status Alarm
14 = No Response from Periodic History
15 = Analysis Timeout
16 = Normalization Failure
17 = Flow Calculation Alarm
18 = Properties Calculation Alarm
19 = Auto-Adjust System Alarm
20 = Auto-Adjust Flow Alarm
21 = Auto-Adjust Delta A Alarm
22 = History Point Movement Failure
23 = Door Open Status Alarm
24 = Other
25 = Flow Calc Alarm: Invalid Input(s)
26 = Flow Calc Alarm: Invalid Config
27 = Flow Calc Alarm: Calculation Error
236 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Type Description Units
28 = Flow Calc Alarm: Boundary Error
29 = Flow Calc Alarm: Invalid Station Assign
30 = Flow Calc Alarm: RESERVED
31 = Flow Calc Alarm: RESERVED
32 = Flow Calc Alarm: RESERVED
33 = Flow Calc Alarm: DP/Flow
34 = Flow Calc Alarm: Pressure
35 = Flow Calc Alarm: Temperature
36 = Flow Calc Alarm: Flowing Density/Z
37 = Flow Calc Alarm: Base Density/Z
38 = Flow Calc Alarm: Relative Density
39 = Flow Calc Alarm: HV/Enthalpy
40 = Flow Calc Alarm: Viscosity
41 = Flow Calc Alarm: User Corr Factor
42 = Flow Calc Alarm: Total/Increment
43 = Flow Calc Alarm: Integral Multi Value
44 = Flow Calc Alarm: RESERVED
45 = Flow Calc Alarm: RESERVED
46 = Flow Calc Alarm: RESERVED
47 = Flow Calc Alarm: RESERVED
48 = Flow Calc Alarm: RESERVED
49 = Flow Calc Alarm: RESERVED
50 = Flow Calc Alarm: Beta Ratio
51 = Flow Calc Alarm: DP/P Ratio
52 = Flow Calc Alarm: Isentropic Exponent
53 = Flow Calc Alarm: Reynolds Number
54 = Flow Calc Alarm: Pressure/Loss Ratio
55 = Flow Calc Alarm: Alpha
56 = Flow Calc Alarm: Expansion Factor
57 = Flow Calc Alarm: K-factor/Meter Factor
58 = Flow Calc Alarm: Mass Press Corr Factor
59 = Flow Calc Alarm: RESERVED
60 = Flow Calc Alarm: RESERVED
61 = Flow Calc Alarm: RESERVED
62 = Flow Calc Alarm: RESERVED
63 = Flow Calc Alarm: RESERVED
64 = Flow Calc Alarm: K-factor/Meter Factor
65 = Flow Calc Alarm: Mass Press Corr Factor
66 = Flow Calc Alarm: Water Cut
67 = Flow Calc Alarm: Shrinkage Factor
68 = Flow Calc Alarm: CTL
69 = Flow Calc Alarm: NGL Factor/Flash Fctr
70 = Flow Calc Alarm: RESERVED
71 = Prop Calc Alarm: Invalid Input (s)
72 = Prop Calc Alarm: Invalid Config
73 = Prop Calc Alarm: Calculation Error
74 = Prop Calc Alarm: Boundary Error
75 = Prop Calc Alarm: RESERVED
76 = Prop Calc Alarm: RESERVED
77 = Prop Calc Alarm: RESERVED
78 = Prop Calc Alarm: RESERVED
Object Parameter Listing 237
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Type Description Units
79 = Prop Calc Alarm: RESERVED
80 = Prop Calc Alarm: Temperature
81 = Prop Calc Alarm: Flowing Density/Z
82 = Prop Calc Alarm: Base Density/Z
83 = Prop Calc Alarm: Relative Density
84 = Prop Calc Alarm: HV/Enthalpy
85 = Prop Calc Alarm: Composition
86 = Prop Calc Alarm: Water Content
87 = Prop Calc Alarm: Atm Press/Grav Accel
88 = Prop Calc Alarm: Viscosity
89 = Prop Calc Alarm: Isentropic Exponent
90 = Prop Calc Alarm: Speed of Sound
91 = Prop Calc Alarm: Critical Temp/Press
92 = Prop Calc Alarm: RESERVED
93 = Prop Calc Alarm: RESERVED
94 = Prop Calc Alarm: RESERVED
95 = Prop Calc Alarm: RESERVED
96 = Prop Calc Alarm: RESERVED
97 = Prop Calc Alarm: RESERVED
98 = Prop Calc Alarm: RESERVED
99 = Prop Calc Alarm: RESERVED
100 = Prop Calc Alarm: RESERVED
101 = Prop Calc Alarm: RESERVED
102 = Prop Calc Alarm: RESERVED
103 = Parameter Health Status
104 = Meter Task Detected Fatal Error
105 = External Accumulator High Increment
106 = Transaction Trigger Limit Reached
107 = No Response From Trans History
101 Alarm Direction 0 = Clear
1 = Set
102 User Alarm Type 0 = Low
1 = Low Low
2 = High
3 = High High
4 = Rate of Change
5 = Discrete
6 = Calculation
7 = Manual
8 = Scanning Disabled
9 = Calibration
10 = Failsure
11 = Failsafe
12 = Permanent Shutdown
13 = Temporary Shutdown
14 = Action on Failure
15 = Other
103 Event Type 0 = RESERVED
1 = Power Applied
2 = Power Removed
238 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Type Description Units
3 = Battery Changed
4 = Firmware Update Start
5 = Firmware Apply Package Version
6 = Firmware Update Complete
7 = Firmware Update Package Restore Fail
8 = Task Restarted
9 = CPU Module Changed
10 = PM Module Changed
11 = CPU Module Previous
12 = PM Module Previous
13 = Schedule Slip Detected
14 = Event Type 14
15 = Event Type 15
16 = Login Success
17 = Login Fail Invalid Credentials
18 = Account Locked
19 = Logout
20 = Account Added
21 = Account Removed
22 = Account Modified
23 = Log Clear
24 = Log Clear Due to CRC Corrupt
25 = History Point Cleared
26 = System Down
27 = Action Block Trip Status Changed
28 = Database Initialized
29 = Daylight Saving Time Change
30 = Total Rollover
31 = System Restart
32 = Pulse Accum Rollover
33 = Firmware Apply Image Version
34 = Firmware I/O Board Disabled
35 = Restart During Calc Cycle
36 = Configuration Counter Changed
37 = Log Clear for Combined Event Log
38 = Log Clear for Separate Event Logs
39 = History Clear
40 = Alarm Clear
41 = Event Clear
42 = History Records Lost
43 = Alarm Records Lost
44 = Event Records Lost
45 = Standard History Point Archival Reset
46 = GC Data Read Failed
47 = Hist Group Read Failed
48 = Application Clear
49 = Users Clear
50 = Counts Dropped
51 = FBxNet Watchdog
52 = Legal Event Exported/Event Exported
53 = User Defined Protocol Maps Clear
Object Parameter Listing 239
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Type Description Units
54 = FW Checksum Error on IO Card
55 = FW Checksum Error
56 = Configuration Checksum Mismatch
57 = Configuration Checksum Saved
58 = Application Restarted
59 = External Accumulator Rollover
60 = Transaction History Clear
61 = Trans History Record Lost
62 = DNP3 Sav5 Enabled
63 = DNP3 Sav5 Disabled
64 = DNP3 Sav5 Keys Updated
104 Calibration Event Type 0 = Verification
1 = Calibration Start
2 = Set Zero
3 = Set Span
4 = Set Midpoint1
5 = Set Midpoint2
6 = Set Midpoint3
7 = Calibration Done
8 = Calibration Cancel
9 = Calibration Restore Defaults
10 = Set Zero Shift
11 = Input Frozen
12 = Input Unfrozen
13 = Calibration Timeout
105 User Event Type 0 = Informational
1 = Error
2 = Status
3 = Calculated Factor
4 = Message
5 = Data
6 = Notice
7 = Feedback
8 = Confirmation
9 = Program Adjusted
10 = Estimated Result
11 = User Input
12 = System Change
13 = HMI Input
14 = Other
106 Alarm Record Type 0 = Parameter
1 = Application
2 = User Application
3 = User Parameter
107 Event Record Type 0 = Parameter Change
1 = Application
2 = Calibration
3 = User Application
4 = String
5 = VTE Parameter Change
6 = VTE Application
240 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Type Description Units
7 = VTE Calibration
8 = Parameter Alarm
9 = Application Alarm
110 Sensor Transmitter Status 0 = Normal
1 = SP Out of Low Limits
2 = SP Below Low Alr Limits
3 = SP Above Upr Alr Limits
4 = SP Out of Hi Limits
5 = DP Out of Low Limits
6 = DP Below Low Alr Limits
7 = DP Above Upr Alr Limits
8 = DP Out of Hi Limits
9 = Warning Set
10 = Critical Alr Set
11 = 4088B Calib in Progress
12 = Sensor Module Fail
13 = LCD Comm Error
14 = RTD Sensor Mismatch
15 = ST Below Low Alr Limits
16 = ST Above Upr Alr Limits
17 = ST Out of Low Limits
18 = ST Out of Hi Limits
19 = PT Sensor Fail
20 = PT Out of Low Limits
21 = PT Below Low Alr Limits
22 = PT Above Upr Alr Limits
23 = PT Out of Hi Limits
24 = ST Simulation Enable
25 = Write Protect Switch Lock
26 = PT Simulation Enable
27 = Feature Board Fail
28 = SP Simulation Enable
29 = DP Simulation Enable
30 = Sensor Module Incompatible
31 = Power Fail
32 = Sensor Module Comm Fail
111 Idle Action 0 = Sleep
1 = Always On
112 PID Control Type 0 = Primary Only
1 = Override Only
2 = Dual Control
113 PID Output Type 0 = Analog
1 = Discrete
114 PID Control Action 0 = Forward
1 = Reverse
115 PID Switch Logic 0 = Lesser
1 = Greater
116 PID Selected Loop 0 = Disabled
1 = Primary
Object Parameter Listing 241
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Type Description Units
2 = Override
117 Data Quality 0 = Healthy
1 = Unhealthy
118 PID Action on Unhealthy Data 0 = Continue
1 = Manual Mode
119 QTR Log Break Options 0 = Disabled
1 = Hourly Only
2 = All Standard Periodic Logs
120 Temperature Correction Selection 0 = No Correction
1 = Isentropic
2 = Isenthalpic (Joule-Thomson)
121 Lockout Type 0 = Disabled
1 = Timed
123 Enclosure Door Status 0 = Enclosure Door Closed
1 = Enclosure Door Open
124 AI Resistor Selection 0 = Current
1 = Voltage
2 = Disabled
125 Actual Mode 0 = Live
1 = Auto
2 = Auto Read
3 = Override
4 = Calibration
5 = Fault
6 = Last Good
7 = Last Hour Average
8 = Ramp to Fault Value
9 = Ramp to Last Hour Avg
127 Raw Counts 0 = A/D Counts
1 = D/A Counts
128 Factory Calibration Status 0 = Invalid
1 = Valid
129 AI Status 0 = Normal
1 = Not Licensed
2 = Instance Inactive
3 = Comm Fail
4 = Override Active
5 = In Alarm
6 = Point Fail
7 = Above Calibration Limit
8 = Below Calibration Limit
9 = Input Frozen
10 = Input Clipped
11 = Factory Calibration Invalid
12 = User Calibration Invalid
13 = Disabled
14 = Termination Missing
15 = Hardware Fail
242 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Type Description Units
16 = RESERVED
130 AO Status 0 = Normal
1 = Not Licensed
2 = Instance Inactive
3 = Comm Fail
4 = Override Active
5 = In Alarm
6 = Point Fail
7 = Above URL
8 = Below LRL
9 = RESERVED
10 = Output Clipped
11 = Factory Calibration Invalid
12 = Auto Read Parameter Invalid
13 = AO Readback Failure
14 = Termination Missing
15 = Disabled
16 = Hardware Fail
131 IO Output User Selection 0 = Auto
1 = Override
2 = Auto Read
132 DI Type 0 = Normal
1 = Latched
133 Logic Level 0 = 66 microamps
1 = 2 milliamps
134 Digital Status 0 = Off
1 = On
135 1x00/2x00 DI Status 0 = Normal
1 = Not Licensed
2 = Instance Inactive
3 = Comm Fail
4 = Override Active
5 = In Alarm
6 = Point Fail
7 = Status Alarm
8 = Hardware Failure
136 IO Fault Selection 0 = Fault
1 = Last Good
2 = Last Hour Average
3 =Ramp to Last Value
4 = Ramp to Last Hour Avg
137 1x00/2x00 DO Status 0 = Normal
1 = Not Licensed
2 = Instance Inactive
3 = Comm Fail
4 = Override Active
5 = In Alarm
6 = Point Fail
Object Parameter Listing 243
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Type Description Units
7 = Auto Read Parameter Invalid
8 = SPO Parameter Invalid
9 = Status Alarm
10 = Hardware Failure
138 PI Filter Mode 0 = Low Speed Filter
1 = High Speed Filter
139 PI Conversion Factor 0 = Pulses/EU
140 PI Rate Period 0 = Seconds
1 = Minutes
2 = Hours
3 = Days
141 Pulses 0 = Pulses
142 PI Status 0 = Normal
1 = Not Licensed
2 = Instance Inactive
3 = Comm Fail
4 = Override Active
5 = In Alarm
6 = Point Fail
7 = Above URL
8 = Below LRL
9 = Termination Missing
10 = Hardware Fail
143 Module Mode 0 = Not Installed
1 = Boot
2 = Normal
3 = Not Licensed
4 = Communication Failure
5 = Module Failure
6 = Power Off
7 = Termination Failure
8 = Firmware Mismatch
9 = Module Mismatch
10 = Firmware Error
11 = Termination Missing
144 AI/DI/PI Channel Type Select 0 = AI
1 = DI
2 = PI
145 Channel Type Select None 0 = None
146 Channel Type Select DO Only 0 = DO Only
147 AI/AO Channel Type Select 0 = AI
1 = AO
148 DI/DO/PI Channel Type Select 0 = DI
1 = DO
2 = PI
149 Calibration Command 0 = None
1 = Freeze
2 = Start Calibration
244 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Type Description Units
3 = Set Zero
4 = Set Span
5 = Set Mid1
6 = Set Mid2
7 = Set Mid3
8 = Set Zero Shift
9 = Save Calibration
10 = Unfreeze
11 = Cancel Calibration
12 = Restore Factory Defaults
13 = Start Verification
14 = Set Verification Pt1
15 = Set Verification Pt2
16 = Set Verification Pt3
17 = Set Verification Pt4
18 = Set Verification Pt5
19 = Set Verification Pt6
20 = Set Verification Pt7
21 = Verification Done
22 = Restored Successfully
23 = Restore Failed
150 Calibration Status 0 = Calibration Not in Progress
1 = Input Frozen
2 = Calibration in Progress
3 = RESERVED
4 = Set Command Failed
5 = Timeout Occurred
6 = Span Too Small
7 = Excess Correction
8 = Passed Parameter Too Small
9 = Passed Parameter Too Large
10 = Ideal Value Too Small
11 = Ideal Value Too Large
12 = Wrong Command
13 = Verification in Progress
151 Week of Month 0 = First Week
1 = Second Week
2 = Third Week
3 = Fourth Week
4 = Last Week
152 Battery Status 0 = Battery Not in Use
1 = Lead Acid Fault
2 = Lead Acid Charging
3 = Lead Acid Standby
4 = Lithium Battery on Reserve C Cell
5 = Lithium Battery Error
6 = Lithium Battery on Main D Cell
153 SRAM Battery Status 0 = Battery Normal
1 = Battery Failure or Removal
Object Parameter Listing 245
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Type Description Units
154 Battery Change 0 = No Change
1 = Battery Replaced
2 = CPU SRAM Battery Replaced
3 = PB SRAM Battery Replaced
155 Operational Trip Point 1X00 0 = 6 Volts
1 = 12 Volts
2 = 24 Volts
156 Log Type 0 = Undefined
1 = Legal Event
2 = Non-legal Event
3 = Legal Alarm
4 = Non-legal Alarm
5 = Legal History
6 = Non-legal History
157 Contract Day of Month 0 = RESERVED
1=1
2=2
3=3
4=4
5=5
6=6
7=7
8=8
9=9
10 = 10
11 = 11
12 = 12
13 = 13
14 = 14
15 = 15
16 = 16
17 = 17
18 = 18
19 = 19
20 = 20
21 = 21
22 = 22
23 = 23
24 = 24
25 = 25
26 = 26
27 = 27
28 = 28
29 = 3rd from Last Day of Month
30 = 2nd to Last Day of Month
31 = Last Day of Month
158 Start Poll 0 = Cancel
1 = Start
159 Continuous Poll 0 = Disabled
1 = Enabled
246 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Type Description Units
160 Indexing Used 0 = Point
1 = Parameter
161 Function Code 0 = Polling Disabled
1 = Read Coil Status
2 = Read Input Status
3 = Read Holding Registers
4 = Read Input Registers
5 = Force Single Coil
6 = Set Single Register
7-14 = RESERVED
15 = Force Multiple Coils
16 = Set Multiple Registers
162 Comm Status 0 = Inactive or Start of Transmission
1 = Response Timeout
2 = Function Code Error
3 = Invalid Register Error
4 = Invalid Request Data Error
5 = Exception Error Code Received
6 = Mapping Table Error
7 = Invalid Response Received
8 = CRC or LRC Check Error
9 = Database Read Error
10 = Valid Response Received
11 = Request Framing Error
12 = Transmit Timeout Error
13 = Database Write Error
14 = Broadcast Request Transmitted
15 = Unable to Connect Error
163 Comm Port Instance 0 = Serial Port 1
1 = Serial Port 2
2 = Serial Port 3
3 = WiFi Port
4 = Ethernet Port
164 Operational Trip Point 2x00 0 = RESERVED
1 = 12 Volts
2 = 24 Volts
165 Master Byte Order 0 = LSB First
1 = MSB First
166 Action Block Status 0 = Inactive
1 = Active
167 Action Block Operators 0 = Greater Than
1 = Less Than
2 = Equal To
3 = Greater Than Or Equal To
4 = Not Equal To
5 = Less Than Or Equal To
6 = AND (Bitwise)
7 = OR (Bitwise)
8 = Watchdog
Object Parameter Listing 247
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Type Description Units
9 = Soft Timer
168 Action Block Bypass Type 0 = Latched
1 = Class B
2 = Class C
3 = Class B / C
169 Action Block Alarm Option 0 = None
1 = Alarm on Active
2 = Alarm on Inactive
170 Action Block Event Option 0 = None
1 = Event on Active
2 = Event on Inactive
171 Action Block Trip Logic 0 = True If Block True
1 = True If Chain True
2 = True If Either True
3 = True If Both True
172 Action Block Action Type 0 = No Action
1 = Effect
2 = Binary Action
3 = Move Value
4 = Load Value
5 = Write Value
173 Discrete Action Type 0 = Force 1 True & 0 False
1 = Force 0 True & 1 False
2 = Poke 1 True
3 = Poke 0 True
4 = Poke 1 True & 0 False
5 = Poke 0 True & 1 False
6 = Force 1 True & Poke 0 False
7 = Force 0 True & Poke 1 False
8 = Force 1 True
9 = Force 0 True
174 Math Block Equation State 0 = Invalid
1 = Valid
175 Effect Output Assert Type 0 = Neither State
1 = Active State Only
2 = Inactive State Only
3 = Both States
176 Effect Reset Option 0 = No Reset Required
1 = Reset Required
177 Effect Reset Ready Values 0 = No Reset Needed
1 = Ready for Reset
178 AI Units Type 0 = Unitless
1 = RESERVED
2 = Absolute Pressure
3 = Temperature
4 = Gas Density
5 = Volume Heating Value
6 = Dynamic Viscosity
248 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Type Description Units
7 = Linear (Short)
8 = Linear (Long)
9-11 = RESERVED
12 = Gas Volume Rate
13 = Mass Rate
14 = Energy Rate
15 = Current
16 = Voltage
17 = RESERVED
18 = Percentage
19 = Acceleration
20 = RESERVED
21 = Water Content
22 = RESERVED
23 = Resistance
24-25 = RESERVED
26 = Differential Pressure
27-28 = RESERVED
29 = Gauge Pressure
30-224 = RESERVED
225 = Mass Heating Value
226-293 = RESERVED
294 = Liquid Density
295 = Water Density
296 = Liquid Volume
297 = Water Volume
298 = Liquid Rate
299 = Water Rate
300-305 = RESERVED
306 = Relative Density
179 AO Units Type 0 = Unitless
1 = RESERVED
2 = Absolute Pressure
3 = Temperature
4 = Gas Density
5 = Volume Heating Value
6 = Dynamic Viscosity
7 = Linear (Short)
8 = Linear (Long)
9-11 = RESERVED
12 = Gas Volume Rate
13 = Mass Rate
14 = Energy Rate
15 = Current
16 = Voltage
17 = RESERVED
18 = Percentage
19 = Acceleration
20-22 = RESERVED
23 = Resistance
24-25 = RESERVED
Object Parameter Listing 249
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Type Description Units
26 = Differential Pressure
27-28 = RESERVED
29 = Gauge Pressure
30-224 = RESERVED
225 = Mass Heating Value
226-293 = RESERVED
294 = Liquid Density
295 = Water Density
296 = Liquid Volume
297 = Water Volume
298 = Liquid Rate
299 = Water Rate
300-305 = RESERVED
306 = Relative Density
180 PI Units Type 0 = Unitless
1-8 = RESERVED
9 = Gas Volume Total
10 = Mass Total
11-23 = RESERVED
24 = Frequency
25-295 = RESERVED
296 = Liquid Volume Total
297 = Water Volume Total
181 HV Measurement Basis 0 = Volume
1 = Mass
182 Water Adjustment Option 0 = No Adjustment
1 = Adjust Composition
183 Factor Curve Option 0 = Single Meter Factor / Single K-factor
1 = Meter Factor Curve / Single K-factor
2 = Single Meter Factor / K-factor Curve
184 Pipe Schedule 0 = Schedule 10
1 = Schedule 40
2 = Schedule 80
185 Meter Averaging Type 0 = Flow Dependent Linear
1 = Flow Dependent Formulaic
2 = Flow Weighted Linear
3 = Flow Weighted Formulaic
186 Rosemount Orifice Method 0 = Based on ISO5167 2003
187 Velocity 0 = ft/s
1 = m/s
188 User Mode Selection 4 0 = Measured
1 = Override
2 = RESERVED
3 = Remote Download
189 GC Component Update 0 = None
1 = Methane
2 = Nitrogen
3 = Carbon Dioxide
250 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Type Description Units
4 = Ethane
5 = Propane
6 = Water
7 = Hydrogen Sulfide
8 = Hydrogen
9 = Carbon Monoxide
10 = Oxygen
11 = i-Butane
12 = n-Butane
13 = i-Pentane
14 = n-Pentane
15 = Hexane
16 = Heptane
17 = Octane
18 = Nonane
19 = Decane
20 = Helium
21 = Argon
22 = neo-Pentane
23 = Benzene
24 = Toluene
25 = Undecane (C11)
26 = Dodecane (C12)
190 Components Alarm 0 = Normal
1 = Analysis Timeout
2 = Normalization Failure
191 Cx Split Type 0 = Hexane Plus Split (C6+)
1 = Heptane Plus Split (C7+)
2 = Octane Plus Split (C8+)
3 = Nonane Plus Split (C9+)
192 GC Validation Alarm 0 = Normal
1 = Component Limit Alarm
2 = Heating Value Limit Alarm
3 = Relative Density Limit Alarm
4 = Un-normalized Mole Sum Alarm
5 = Total Mole Sum Alarm
6 = Composition Deviation Alarm
7 = Alarm 1
8 = Alarm 2
193 Auto Configure 0 = No Action
1 = Auto Configure
194 Daylight Saving Time Status 0 = Standard Time
1 = Saving Time
2 = Gift Time
195 Rate of Change Mode Alarm 0 = Disabled
1 = Alarm on Positive Changes
2 = Alarm on Negative Changes
3 = Alarm on Both
196 LCD Bit Masks 0 = None
Object Parameter Listing 251
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Type Description Units
1 = Differential Pressure
2 = Absolute Pressure
3 = Temperature
4 = Baud Rate
5 = Gage Pressure
6 = Sensor Temperature
7 = RESERVED
8 = Slave Address
9 = Host Parameter 1
10 = Host Parameter 2
11 = Host Parameter 3
12 = Host Parameter 4
13 = Host Parameter 5
14 = Host Parameter 6
15-16 = RESERVED
17 = Host Variable 1
18 = Host Variable 2
19 = Host Variable 3
197 Transmitter Status Option 0 = None
1 = DP Sensor Present
2 = AP Sensor Present
3 = GP Sensor Present
4 = PT Sensor Present
5 = LCD Available
198 User Commands 0 = No Command
1 = On Demand Connect
2 = On Demand Synchronize
3 = Transmitter Reset
199 Calibration Status of 4088 0 = No Measurement In Calibration
1 = DP Measurement In Calibration
2 = SP Measurement In Calibration
3 = PT Measurement In Calibration
200 Status 0 = Success
1 = Failure
2 = Disabled
201 4088 Input Status 0 = Normal
1 = Not Licensed
2 = Instance Inactive
3 = Communication Failed
4 = Config. Issue Due to Write Protect
5 = DP Failed
6 = Pressure Failed
7 = RTD Failed
8 = Synchronization In Progress
9 = Scan Disabled
10 = Writing Failed
11 = RESERVED
12 = 4088 in Mode A
13 = Reading Device
14 = Writing Device
252 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Type Description Units
15 = Baud Too Low
16 = Writing Baud Failed
17 = Sensor Disconnected
18 = Scanning Baud Rate 1200
19 = Scanning Baud Rate 2400
20 = Scanning Baud Rate 4800
21 = Scanning Baud Rate 9600
22 = Scanning Baud Rate 19200
202 Variable Status 0 = Good - Not Limited
1 = Poor Accuracy-Low Limited
2 = Poor Accuracy-High Limited
3 = Poor Accuracy-No Limited
4 = Manual/Fixed - Constant
5 = Bad - Constant
6 = Unknown
203 GC Type 0 = American
1 = European
204 GC US Alarm 1 0 = Normal
1 = A/D 0 Low
2 = A/D 0 High
3 = A/D 1 Low
4 = A/D 1 High
5 = A/D 2 Low
6 = A/D 2 High
7 = A/D Cal Low
8 = A/D Cal High
9 = D/A 1 Low
10 = D/A 1 High
11 = D/A 2 Low
12 = D/A 2 High
13 = D/A 3 Low
14 = D/A 3 High
15 = Analyzer Failure
16 = Checksum Failure
205 GC US Alarm 2 0 = Normal
1 = Power Failure
2 = RF % Deviation
3 = Preamp Failure
4 = Adjust Preamp
206 DP Flow Calculation Alarm 0 = RESERVED
1 = Invalid Input(s)
2 = Invalid Configuration
3 = Calculation Error
4 = Boundary Error
5 = Invalid Station Assignment
6-8 = RESERVED
9 = Differential Pressure
10 = Pressure
11 = Temperature
12 = Flowing Density/Compressibility
Object Parameter Listing 253
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Type Description Units
13 = Base Density/Compressibility
14 = Relative Density
15 = Heating Value/Enthalpy
16 = Viscosity
17 = User Correction Factor
18 = Total/Increment
19 = Integral Multiplier Value
20-25 = RESERVED
26 = Beta Ratio
27 = DP/P Ratio
28 = Isentropic Exponent
29 = Reynolds Number
30 = Pressure Loss/Pressure Loss Ratio
31 = Alpha
32 = Expansion Factor
207 Property Calculation Alarm 0 = RESERVED
1 = Invalid Input(s)
2 = Invalid Configuration
3 = Calculation Error
4 = Boundary Error
5-8 = RESERVED
9 = Pressure
10 = Temperature
11 = Flowing Density/Compressibility
12 = Base Density/Compressibility
13 = Relative Density
14 = Heating Value/Enthalpy
15 = Composition
16 = Water Content
17 = Atmospheric Press/Gravitational Accel
18 = Viscosity
19 = Isentropic Exponent
20 = Speed of Sound
21-32 = RESERVED
208 Yes/No Option 0 = No
1 = Yes
209 Module Type 0 = Unknown
1 = HMI
2 = On-Board I/O
3 = Optional I/O
4 = Expanded I/O
5 = I/O Module
6-253 = RESERVED
254 = I/O Scan CPU
255 = Main CPU
210 Module Subtype 0 = None
1 = 8AIDIPI 2AO 2DO
4 = 8AODO
49 = HART 4
50 = 4 COMM
254 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Type Description Units
211 Option Not Applicable 0 = Not Applicable
212 LCD Installed 0 = LCD Not Found
1 = LCD Detected
213 WiFi Installed 0 = WiFi Not Found
1 = WiFi Detected
214 Serial Port Module 0 = RS-232
1 = RS-485 2-Wire (No Termination)
2 = RS-485 2-Wire (Terminated)
215 Action Block Alarm Type 0 = Low
1 = Low Low
2 = High
3 = High High
4 = Rate of Change
5 = Other
216 Action Block Chain Type 0 = AND
1 = OR
2 = NAND
217 Action Block Chain to Status 0 = Block Status
1 = Chain Status
2 = Output Status
218 Current Bypasses Active 0 = None
1= Local Latched
2 = Remote Latched
3 = Class B
4 = Class C
5 = Class B/C
219 4088 RTD Type 0 = RESERVED
1 = 3-wire
2 = 4-wire
220 Alarm Status RTD 0 = Normal
1 = Not Licensed
2 = Instance Inactive
3 = Comm Fail
4 = Override Active
5 = In Alarm
6 = Point Fail
7 = Above URL
8 = Below LRL
9 = Input Frozen
10 = Type Mismatch
221 EU Scaling Mode 0 = Multi-Point Calibration
1 = EU Scaling
222 Alpha 0 = in./in.-°F
1 = mm/mm-°C
2 = mm/mm-K
223 Calculated Cd 0 = Flow Equation Standard
1 = Calibrated Discharge Coefficient Curve
Object Parameter Listing 255
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Type Description Units
224 Ethernet Support 0 = No Ethernet Support
1 = Ethernet Supported
225 Mass Heating Value 0 = Btu/lb
1 = MJ/kg
226 WiFi Antenna Type 0 = Internal Antenna
1 = External Antenna
227 Auto Adjust Initial Cycle 0 = Initial Cycle Complete
1 = Initial Cycle In Progress
228 Auto Adjust System Alarm 0 = Normal Flow
1 = No Flow / Loss of Both Pulses
2 = Leakage or Resonant No-Net Flow
3 = No Main Rotor Pulses
4 = No Sensing Rotor Pulses
229 Auto Adjust Flow Alarm 0 = Normal Flow
1 = Non-steady Flow
230 Auto Adjust Delta A Alarm 0 = Normal
1 = Low Warning
2 = High Warning
3 = Low Alarm
4 = High Alarm
231 Serial Port 1 Owner 1 = DNP3/Modbus Slave
2 = DNP3
3 = Modbus Slave
4 = Modbus Master
5 = BSAP
6 = ROC
7 = RESERVED
232 Serial Port 2 Owner 1 = DNP3/Modbus Slave
2 = DNP3
3 = Modbus Slave
4 = Modbus Master
5 = BSAP
6 = ROC
7 = RESERVED
233 Serial Port 3 Owner 1 = DNP3/Modbus Slave
2 = DNP3
3 = Modbus Slave
4 = Modbus Master
5 = BSAP
6 = ROC
7 = MVS4088B
234 WiFi Port Owner 0-1 = RESERVED
2 = DNP3
3-7 = RESERVED
236 Months of Year 0 = RESERVED
1 = January
2 = February
3 = March
256 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Type Description Units
4 = April
5 = May
6 = June
7 = July
8 = August
9 = September
10 = October
11 = November
12 = December
237 GC Poll Alarm 0 = Normal
1 = Poll Failed
2 = Comp Code Match Error
3 = Poll Disabled
4 = Auto-config Fail
238 No Flow Option 0 = Time Between Pulses
1 = Flow Cut-off
2 = Flow Cut-off with accumulation
239 No Flow Status 0 = Not Flowing
1 = Flowing
240 Protocol 0 = None
1 = DNP3
2 = Modbus
3 = ROC
4 = BSAP
5 = FBxNet
241 String Type 0 = None
1 = Password
242 4088 Temperature 0 = °F
1 = °C
243 GC EU Alarm 1 0 = Normal
1 = Peak Overflow
2 = Unknown Error
3 = Peak Analysis Failure
4 = Chromat I/O Failure
5 = Controller Stack Overflow
6 = Undefined
7 = Undefined
8 = Peak Analysis Start
9 = Chromat I/O Start Failure
10 = Analog Input Failure
11 = Analog Input Failure
12 = Analog Input Failure
13 = Chromat Buffer Overflow
14 = Inputs Out of Range
15 = Preamp Failure
16 = Preamp Adjust
244 GC EU Alarm 2 0 = Normal
1 = Calibration Failure
Object Parameter Listing 257
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Type Description Units
2 = Auto Start Fail
3 = Alarm on 24Hr Averages
4 = Analysis Failure
5 = Auto Start Alarm
245 Pulse Rate 0 = Pulses/sec
1 = Pulses/min
2 = Pulses/hr
3 = Pulses/day
246 Event Log Config Type 0 = Combined Event Log
1 = Separate Legal and Non-Legal Event Logs
2 = Separate Verifiable & Exportable Logs
3 = BSAP Combined Alarm Event Log
247 Pressure Effect 0 = %/psi
1 = %/bar
248 IP Connection 1 2 3 Owner 0 = DNP3 Protocol
1 = Modbus Slave Protocol
2 = ROC Protocol
3 = BSAP Protocol
249 IP Connection 4 5 6 Owner 0 = Modbus Slave Protocol
1 = ROC Protocol
2 = BSAP Protocol
250 Screen Saver Password 0 = No Password Required
1 = Password Required
251 Alarm Format 0 = Standard Alarm Format
1 = Extended Alarm Format
252 Signal Name Format 0 = ControlWave
1 = Native
2 =Accol3
253 Meter Direction 0 = Forward
1 = Reverse
254 Alarm Status 0 = Normal
1 = In Alarm
255 Low Power Option 0 = Low Power Mode Not Available
1 = Low Power Mode Available
256 Database Recovery Option 0 = Restore to Database Defaults
1 = Restore from Flash Config File
257 Power Control Comm Port Option 0-2 = RESERVED
3 = All Comm Ports Enabled
258 Override Type Select 0 = Low
1 = High
259 Power Control Status 0 = Power Control Inactive
1 = Power Control Active
2 = Power Control Low Voltage
3 = Power Control Held by Comms
260 IP Connection 7 Owner 0 = Modbus Master Protocol
261 CPU Frequency Level 0 = Low Frequency
258 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Type Description Units
1 = Medium Frequency
2 = High Frequency
262 Log/Archive Array Format 0 = Logs as arrays not available
1 = Field Data Values
2 = TimeStamp (TS) + Field Data Values
3 = TS+Local/Global Seq#+Field Data Values
4 = TS2 (Days+Secs+20ms)+Field Data Values
5 = TS2+Seq#s+Field Data Values
6 = Seq#s+Field Data Values
7 = Field Data Values (Oldest -> Newest)
8 = TS+Field Data Values (Oldest -> Newest)
9 = TS+Seq#+Field Data Values (Oldest -> Newest)
10 = TS2+Field Data Values (Oldest -> Newest)
11 = TS2+S#+Field Data Values(Oldest -> Newest)
12 = S#+Field Data Values (Oldest -> Newest)
263 Base Pressure 0 = User
1 = 14.65 psi(a)
2 = 14.696 psi(a)
3 = 14.73 psi(a)
4 = 15.025 psi(a)
5 = 101.325 kPa(a)
6 = 0.101325 Mpa(a)
7 = 1.01325 bar(a)
264 Linear Flow Calculation Alarm 0 = RESERVED
1 = Invalid Input(s)
2 = Invalid Configuration
3 = Calculation Error
4 = Boundary Error
5 = Invalid Station Assignment
6-8 = RESERVED
9 = Flow
10 = Pressure
11 = Temperature
12 = Flowing Density/Compressibility
13 = Base Density/Compressibility
14 = Relative Density
15 = Heating Value/Enthalpy
16 = Viscosity
17 = User Correction Factor
18 = Total/Increment
19 = Integral Multiplier Factor
20-25 = RESERVED
26 = K-factor/Meter Factor
27 = Mass Pressure Correction Factor
28-32 = RESERVED
265 Active DNP3 Map 0 = Default
1 = User Defined
266 Alarm Suppress State 0 = Off
1 = On
Object Parameter Listing 259
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Type Description Units
267 Memory Size 0 = Bytes
1 = Kilobytes
2 = Megabytes
268 Channel Type Select AO Only 0 = AO Only
269 Poll Intervals 0 = 1 second
1 = 500 ms
2 = 200 ms
3 = 100 ms
4 = 50 ms
5 = 20 ms
6 = 10 ms
270 Rack Size 0 = 8 Modules
1 = 16 Modules
2 = 24 Modules
3 = 32 Modules
271 Application Status 0 = Unloaded
1 = Load Requested
2 = Loaded
3 = Start Requested
4 = Running
5 = Stop Requested
6 = Stopped
7 = Terminate Requested
8 = Terminated
9 = Undefined
272 Application Exception Code 0 = None
1 = String Error
2 = Watchdog Exceeded
3 = Max CPU Load Exceeded
4 = System Error
5 = End Error
273 Application Control 0 = Idle
1 = Start
2 = Stop
3 = Load
4 = Clear
274 Task Status 0 = Stopped
1 = Started
2 = No License
3 = Library Version Error
275 RESERVED 0 = RESERVED
276 DI/PI Resistor Selection 0 = Pull Up
1 = Pull Down
277 RESERVED 0 = RESERVED
278 Flow Type 0 = Mass
1 = Volume
279 Liq LinMtr Linear Meter Type 0 = Turbine
260 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Type Description Units
1 = Coriolis
2 = Ultrasonic
3 = Positive Displacement
280 Rounding Option 0 = No Rounding
1 = Rounding Per API 12.2,Rounding.
281 Liq LinMtr Flow Calculation Alarm 0 = RESERVED
1 = Invalid Input(s)
2 = Invalid Configuration
3 = Calculation Error
4 = Boundary Error
5 = Invalid Station Assignment
6-8 = RESERVED
9 = Flow
10 = Pressure
11 = Temperature
12 = Flowing Density
13 = Base Density
14-17 = RESERVED
18 = Total/Increment
19-25 = RESERVED
26 = K-factor/Meter Factor
27 = Mass Pressure Correction Factor
28 = Water Cut
29 = Shrinkage Factor
30 = CTL/CPL
31 = NGL Factor/Flash Gas Factor
32 = RESERVED
282 Liq LinMtr Property Calculation Alarm 0 = RESERVED
1 = Invalid Input(s)
2 = Invalid Configuration
3 = Calculation Error
4 = Boundary Error
5-8 = RESERVED
9 = Pressure
10 = Temperature
11 = Flowing Density
12 = Base Density/Compressibility
13-16 = RESERVED
17 = Atmospheric Press/Gravitational Accel
18-20 = RESERVED
21 = Critical Temp/Press
22-32 = RESERVED
283 Water Cut Method 0 = Dynamic
1 = Static
284 DO Low Side Switch 0 = Disable grounded output
1 = Enable grounded output
285 User Mode Selection 5 0 = Measured
1 = Override
286 PI Filter Mode 0 = Low Speed Filter
Object Parameter Listing 261
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Type Description Units
1 = Medium Speed Filter
2 = High Speed Filter
287 Busy Status 0 = Idle
1 = Busy
288 Personality Module Status 0 = Module inserted and valid
1 = Module not present
2 = Module not valid for this slot
3 = Module not calibrated
4 = Module EEPROM data corrupted
289 Personality Module Type 0 = Invalid personality board type
1 = CPU Personality Module
2 = CPU PM with WiFi
3-9 = RESERVED
10 = 12-point mixed I/O PM
11 = 10-point DI/DO PM
12 = 8-point AI/DI/PI PM
13 = 8-point AO/DO PM
14-31 = RESERVED
32 = 16-point DI PM
33 = 16-point DIPI PM
34-48 = RESERVED
49 = 4 Channel HART PM
50 = 4 Channel Comm PM
290 IP Connection Owner 0 = DNP3 Protocol
1 = Modbus Slave Protocol
2-3 = RESERVED
4 = RESERVED
291 Serial Port Owner 0 = RESERVED
1 = DNP3/Modbus Slave
2 = DNP3
3 = Modbus Slave
4 = Modbus Master
5-7 = RESERVED
292 Serial Port Owner 0 = RESERVED
1 = DNP3/Modbus Slave
2 = DNP3
3 = Modbus Slave
4 = Modbus Master
5-6 = RESERVED
7 = MVS4088B
293 Protocol 0 = None
1 = DNP3
2 = Modbus
3-4 = RESERVED
5 = FBxNet
294 Liquid Density 0 = lb/ft3
1 = kg/m3
2 = g/cc
3 = lb/MMCF
262 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Type Description Units
4 = lb/US gal
5 = kg/L
6 = lb/bbl
7 = RD
8 = API
295 Water Density 0 = lb/ft3
1 = kg/m3
2 = g/cc
3 = lb/MMCF
4 = lb/US gal
5 = kg/L
6 = lb/bbl
7 = RD
8 = API
296 Liquid Volume Total 0 = ft3
1 = m3
2 = MCF
3 = (k)m3
4 = MMCF
5 = BCF
6=L
7 = US gal
8 = bbl
297 Water Volume Total 0 = ft3
1 = m3
2 = MCF
3 = (k)m3
4 = MMCF
5 = BCF
6=L
7 = US gal
8 = bbl
298 Liquid Volume Rate 0 = ft3/s
1 = ft3/min
2 = ft3/h
3 = ft3/d
4 = MCF/s
5 = MCF/min
6 = MCF/h
7 = MCF/d
8 = m3/s
9 = m3/min
10 = m3/h
11 = m3/d
12 = (k)m3/s
13 = (k)m3/min
14 = (k)m3/h
15 = (k)m3/d
16 = MMCF/s
17 = MMCF/min
Object Parameter Listing 263
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Type Description Units
18 = MMCF/h
19 = MMCF/d
20 = BCF/s
21 = BCF/min
22 = BCF/h
23 = BCF/d
24 = L/s
25 = L/min
26 = L/h
27 = L/d
28 = US gal/s
29 = US gal/min
30 = US gal/h
31 = US gal/d
32 = bbl/s
33 = bbl/min
34 = bbl/h
35 = bbl/d
299 Water Volume Rate 0 = ft3/s
1 = ft3/min
2 = ft3/h
3 = ft3/d
4 = MCF/s
5 = MCF/min
6 = MCF/h
7 = MCF/d
8 = m3/s
9 = m3/min
10 = m3/h
11 = m3/d
12 = (k)m3/s
13 = (k)m3/min
14 = (k)m3/h
15 = (k)m3/d
16 = MMCF/s
17 = MMCF/min
18 = MMCF/h
19 = MMCF/d
20 = BCF/s
21 = BCF/min
22 = BCF/h
23 = BCF/d
24 = L/s
25 = L/min
26 = L/h
27 = L/d
28 = US gal/s
29 = US gal/min
30 = US gal/h
31 = US gal/d
32 = bbl/s
33 = bbl/min
264 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Type Description Units
34 = bbl/h
35 = bbl/d
300 Serial Port Owner 0-1 = RESERVED
2 = DNP3
3-7 = RESERVED
301 Operational Trip Point 3000 0 = RESERVED
1 = Solar Supply
2 = DC Supply
302 Comm Port Instance 0 = Serial Port 1
1 = Serial Port 2
2 = Serial Port 3
3 = Serial Port 4
4 = Ethernet Port 1
5 = Ethernet Port 2
303 FB3000 DO Status 0 = Normal
1 = Not Licensed
2 = Instance Inactive
3 = Comm Fail
4 = Override Active
5 = In Alarm
6 = Point Fail
7 = Auto Read Parameter Invalid
8 = SPO Parameter Invalid
9 = Termination Missing
10 = Status Alarm
11 = Hardware Fail
304 FB3000 DI Status 0 = Normal
1 = Not Licensed
2 = Instance Inactive
3 = Comm Fail
4 = Override Active
5 = In Alarm
6 = Point Fail
7 = Termination Missing
8 = Status Alarm
9 = Hardware Fail
305 4088 Config Type 0 = None
1 = EMV4088B
306 Relative Density 0 = RD
307 Calc Availability 0 = Not Available
1 = Available
308 Serial Port Mode 0 = RESERVED
1 = RS-485 2-Wire (No Termination)
2 = RS-485 2-Wire (Terminated)
309 Application Package Status 0 = Unloaded
1 = Loaded
310 Time Synchronization Deadband 0 = Seconds
Object Parameter Listing 265
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Type Description Units
1 = Milliseconds
311 Reset Counter 0 = Idle
1 = Reset
312 HART Comm Mode 0 = Disabled
1 = Point to Point
2 = Multidrop
313 HART Master Type 0 = Primary
1 = Secondary
314 HART Scan Status 0 = Not scanning
1 = Scanning
2 = Dual Master
3 = Pass thru
4 = Burst mode
315 HART Passthru Mode 0 = Disable
1 = Strip
2 = Full
316 HART Poll Mode 0 = Skip
1 = PV only
2 = All Process
3 = All Dynamic
317 HART Fault Selection 0 = Fault
1 = Last Good
318 Module Subtype – Extended Rack 0 = None
1 = 8AIDIPI 2AO 2DO
4 = 8AODO
319 Historical Log Timestamp Mode 0 = Start of Period
1 = End of Period
320 Density Option 0 = Station Base Density
1 = Meter Observed Density
2 = Station Header Density
322 Product Type 0 = Crude Oil
1 = Refined Products
2 = RESERVED
3 = Lubricating Oil
5 = RESERVED
6 = Light Hydrocarbon
323 Oil Flow Calculation Method 0 = API Ch. 12.2
1 = API Ch. 20.1
324 API Ch 11 Volume Correction Method 0 = API 11.1 2007
325 Water Option 0 = Use Oil Correction Factor for Water
1 = Use Separate Correction Factor for Water
326 IBP Timesynch Option 0 = Disable
1 = Enable
2 = Require NHP
327 FBxNet Device Connection Status 0 = Not Started
1 = Connecting
266 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Type Description Units
2 = Resolving
3 = Online
4 = Offline
5 = Invalid
6 = Connection Timeout
7 = Transmit Error
8 = Response Timeout
9 = Resolving Failure
10 = Read Failure
11 = Disabled
12 = Online with Parameter Error(s)
13 = No Account Found
14 = Authentication Failure
15 = Authenticating
329 Module Mode 0 = Not Installed
1 = Boot
2 = Normal
3 = Not Licensed
4 = Communcation Failure
5 = Module Failure
6 = Power Off
7 = Firmware Mismatch
8 = Module Mismatch
9 = Firmware Error
330 Meter Status 0 = Normal
1 = Batch Active
2 = Batch Idle
331 Station Status 0 = Normal
1 = Batch Active
2 = Batch Idle
332 History Option 0 = Disable
1 = Enable
2 = Enable / Break with Batch
333 Batch Option 0 = Disable
1 = Enable
334 RESERVED
335 RESERVED
336 RESERVED
337 RESERVED
338 RESERVED
339 Batch Restart Option 0 = End Current Start Next
1 = Continue Current
2 = Stop Current
332 RESERVED
333 RESERVED
Object Parameter Listing 267
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Type Description Units
334 RESERVED
335 RESERVED
336 RESERVED
337 RESERVED
338 RESERVED
339 RESERVED
340 Connection File Status 0 = No Error
1 = File Open
2 = Column Mismatch
3 = Missing Required Column
4 = Exceeded Max Data Points
5 = Empty Subscriber Tag
6 = Invalid FBxNet Data Instance
7 = Missing or Invalid Required Value
8 = Duplicate FBxNet Data Instance
9 = Not Configured
10 = Exceeded Publisher Fault
341 FBxNet Poll Cycle 0 = Off
1= On
342 Device Status 0 = Normal
1 = PV Override
2 = Point Fail
3 = Device Comm Fail
4 = PV Above URL
5 = PV Below LRL
6 = Termination Missing
7 = Module Comm Fail
8 = Not Scanning
9 = In Alarm
10 = Device Malfunction
11 = SV Override
12 = TV Override
13 = QV Override
343 HART Object Status 0 = Normal
1 = In Alarm
2 = Fault
3 = Override
4 = No Device
5 = Device Comm Error
344 HART Units 0 = RESERVED
1 = inH2O
2 = inHg
3 = ftH2O
4 = mmH2O
5 = mmHg
6 = psi
7 = bar
8 = mbar
268 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Type Description Units
9 = g/cm3
10 = kg/cm3
11 = Pa
12 = kPa
13 = Torr
14 = at
15 = ft3
16 = gal/min
17 = l/min
18 = gal (UK)/min
19 = m3/h
20 = ft/s
21 = m/s
22 = gal/s
23 = Mgal/d
24 = l/s
25 = Ml/d
26 = ft3/s
27 = ft3/d
28 = m3/s
29 = m3/d
30 = gal (UK)/h
31 = gal (UK)/d
32 = C
33 = F
34 = R
35 = k
36 = mV
37 = ohms
38 = Hz
39 = mA
40 = gal
41 = l
42 = gal(UK)
43 = m3
44 = ft
45 = m
46 = bbl
47 = in
48 = cm
49 = mm
50 = min
51 = s
52 = h
53 = d
54 = cSt
55 = cP
56 = uSiemen
57 = %
58 = V
59 = pH
Object Parameter Listing 269
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Type Description Units
60 = g
61 = kg
62 = t
63 = lb
64 = ton
65 = ton(UK)
66 = mSiemen/cm
67 = uSiemen/cm
68 = N
69 = J
70 = g/s
71 = g/min
72 = g/h
73 = kg/s
74 = kg/min
75 = kg/h
76 = kg/d
77 = t/min
78 = t/h
79 = t/d
80 = lb/s
81 = lb/min
82 = lb/h
83 = lb/d
84 = ton/min
85 = ton/h
86 = ton/d
87 = ton(UK)/h
88 = ton(UK)/d
89 = DTH
90 = SG
91 = g/cm3
92 = kg/cm3
93 = lb/gal
94 = lb/ft3
95 = g/ml
96 = kg/l
97 = g/l
98 = lb/in3
99 = ton/yd3
100 = Tw
101 = Bx
102 = B
103 = B (light)
104 = degrees API
105 = % sol/wt
106 = % sol/vol
107 = Bg
108 = proof/vol
109 = proof/mass
110 = bu
111 = yd3
270 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Type Description Units
112 = ft3
113 = in3
114= in/s
115 = in/min
116 = ft/min
117 = /s
118 = rps
119 = rpm
120 = m/h
121 = nM3/h
122 = Nl/hr
123 = SCF/min
124 = bbl (US)
125 = oz
126 = ftlbf
127 = kW
128 = kWh
129 = hp
130 = ft3/h
131 = m3/min
132 = bbl/s
133 = bbl/min
134 = bbl/h
135 = bbl/dd
136 = gal/h
137 = gal(UK)/s
138 = i/h
139 = ppm
140 = Mcal(th)/h
141 = MJ/h
142 = Btu/h
143 = degrees
144 = radian
145 = inH2O(60F)
146 = ug/l
147 = ug/m3
148 = %
149 = vol%
150 = % Stm Qual
151 = ft-16
152 = ft3/lb
153 = pF
154 = ml/l
155 = ul/l
156 = dB
157-159 = RESERVED
160 = %P
161 = %LEL
162 = Mcal(th)
163 = Kilo ohms
164 = MJ
Object Parameter Listing 271
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Type Description Units
165 = Btu
166 = Nm3
167 = N1
168 =SCF
169 = ppb
170-234 = RESERVED
235 = gal/d
236= h1
237 = MPa
238 = inH2O(4C)
239 = mmH2O(4C)
240-249 = RESERVED
250 = NOT USED
251 = NONE
252 = RESERVED
253 = Special
345 EFM Hist Time Format 0 = HHMM
1 = HHMMSS
346 Publisher Comm Enable 0 = Disabled
1 = Enale Read/Write
2 = Enable Read Only
347 AO/DO Channel Type Select 0 = AO
1 = DO
348 FBxNData Input Status 0 = Normal
1 = Fault
2 = Override
3 = RESERVED
4 = Alarm
5-16 = RESERVED
17 = Comm Failure
349 Apply Resize Values 0 = Good
1 = Invalid User Config
2 = Resize in Progress
3 = Last Resize Failed
4 = Transaction In Progress
5 = Database Instance Full
350 System Verification Status 0 = System Unverified
1 = System Verified
351 Base Density Units & Temperature 0-10 = RESERVED
11 = kg/m3@60F
12 = kg/m3@15C
13 = kg/m3@20C
14 = kg/m3@30C
15 = kg/m3@0C
16-21 = RESERVED
22 = g/cc@15C
23 = g/cc@20C
24 = g/cc@30C
25 = g/cc@0C
272 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Type Description Units
26-70 = RESERVED
71 = RD@60F
72 = RD@15C
73 = RD@20C
74 = RD@30C
75 = RD@0C
76-80 = RESERVED
81 =API@60F
352 License Control 0 = Licensed
1 = Unlicensed
353 HART Pressure Units 0 = psi
1 = kPa
2 = MPa
3 = bar
4 = kg/cm3
5 = inH2O@60F
6 = inH2O@68F
7 = mbar
354 Shrinkage Factor Option 0 = Apply to Gross Standard Volume
1 = Apply to Net Standard Volume
355 Legal Event Lock Status 0 = Unlocked
1 = Locked
357 Compressibility Factor 0 = 1/psi
1 = 1/kPa
2 = 1/MPa
3 = 1/bar
4 = 1/(kg/cm²)
358 Flow Input Option 0 = Flow Input Only
1 = External Accumulator Only
2 = External Accumulator with Flow Rate
359 Flow Time Units 0=s
1 = min
360 Fault Health Configuration 0 = Normal
1 = Primary Inputs – Fault
2 = Primary Inputs – Alarm
3 = Primary Inputs – Override
4 = Calculation Alarms
5 – Flow Rate Alarms
6 = Config Checksum Fault
7 = System Fault
361 Batch Trigger Options 0 = None
1 = Continuous Batching
362 Start Batch Command 0 = None
1 = Start Batch
363 End Batch Command 0 = None
1 = End Batch
364 RESERVED
365 RESERVED
Object Parameter Listing 273
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Type Description Units
366 Rack Size Exp 0 = 4 Modules
1 = 8 Modules
2 = 12 Modules
3 = 16 Modules
4 = 20 Modules
5 = 24 Modules
6 = 28 Modules
7 = 32 Modules
367 CSV Option 0 = Database Objects
1 = Use CSV Files
368 CSV Parse Status 0 = No Error
1 = No Mapping Found
2 = Column Mismatch
3 = Missing Required Column
4 = Exceeded Max Data
5 = Invalid Row Data
6 = Misc Error
7 = Duplicate Data
8 = In Progress
369 Reloading Maps 0 = Ready
1 = In Progress
370 Integrity Status 0 = Disabled
1 = Not Checked
2 = Valid
3 = Fail
371 IBP Header Option 0 = Expanded Header
1 = Expanded Header Ignore Address
2 = Short Header
372 Inegrity Status 0 = Disabled
1 = Not Checked
2 = Computing
3 = Valid
4 = Fail
373 Hexidecimal Data 0 = Hex
374 Trans Hist Data Format 0 = Numeric
1 = String
375 Trans Grp Conf Stat 0 = Done
1 = In Progress
376 RESERVED RESERVED
377 Trans Trigger Subtype 0 = None
1 = Batch
2 = Hourly
3 = Daily
378 Trans Trigger Status 0 = Not Started
1 = In Progress
2 = Stopped
3 = Invalid Trigger
4 = Short Trigger
5 = Trigger Limit Reached
274 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Type Description Units
6 = No Points Added
379 Trans Trigger Signal 0 = None
1 = Start
2 = Next
3 = Stop
380 Trans Hist Status 0 = Stopped
1 = In Progress
381 Trace Status 0 = Ready
1 = Start
2 = Create File
3 = Busy
4 = Clean Up
382 Transactional History Group Use 0 = General
1 = Liquid Linear Meter Batching
2 – 100 RESERVED
101 = PMWT Well Test Report
102 = PMWO Cycle Record
103 = PMWO Gas Lift Test Record
104 = PMFL Auto-Haul Record
105 = PMFL LoadOut Record
383 ROC Long Credentials 0 = ROC Short Credentials
1 = ROC Long Credentials
384 Trans History Type 0 = Average
1 = Total / Difference
2 = End Snapshot
3 = Minimum
4 = Maximum
5 = Integration
6 = Start Snapshot
385 Redundancy Status 0 = Not Enabled
1 = Active
386 Standby Status 0 = Not Connected
1 = Side Load
2 = Ready
387 Active Slot 0 = Slot 1
1 = Slot 2
388 Meter runs reserved
389 Meter runs reserved
390 Meter runs reserved
391 Meter runs reserved
392 Meter runs reserved
393 Meter runs reserved
394 Meter runs reserved
395 Meter runs reserved
396 Meter runs reserved
397 Meter runs reserved
Object Parameter Listing 275
DNP3 Protocol Specifications Manual (FB3000)
D301858X0
September 2024
Type Description Units
398 Meter runs reserved
399 Meter runs reserved
400 Port Owner 0-6 = RESERVED
7 = MVS4088B
8-19 = RESERVED
20 = None
402 DI Channel Type Select 0 = DI
403 DI/PI Channel Type Select 0 = DI
1 = PI
404 Link 0 = Disable
1 = ETH1
2 = ETH2
3 = Backplane
276 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.2 Object Parameters
Important
The system determines all object references (parameter names that include “_OBJ” such as ALM_OBJ, CAL_OBJ,
STATION_OBJ, and so on) only at startup and does not dynamically update these object references until the next time you
restart the device. If you assign a meter to a different station, you must restart that device – which causes a system
reinitialization – before the system can acknowledge, for example, that Linear Mtr_1.STATION_OBJ should now point to
Station_2.PB-SEL.
The tables in this section list the parameters associated with each object. Parameters include:
Field Description
Name The parameter’s system identifier.
Description Description for the parameter, including (if appropriate) any values.
Data Type Type of data associated with the parameter. Valid values include:
Binary value – bitmask representing the on/off state of multiple properties;
BIN the numeric value indicates the number of bits (for example, BIN32 is a 32-bit
binary)
Byte array; the numeric value indicates the number of bytes (for example,
ByteArray
ByteArray32 is a 32-byte array)
DOUBLE 64-bit floating point number
Enumeration; the numeric value indicates the number of bits (for example,
ENUM
ENUM16 is a 16-bit long enumeration)
FLOAT 32-bit floating point number
Signed integer; the numeric value indicates the number of bits (for example,
INT
INT16 is a 16-bit signed integer)
OBJREF Object reference
PRMREF Parameter reference
Object Parameter Listing 277
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Field Description
Number of seconds since 01 January 2000 @ 00:00:00 (accounting for the 2038
TIME
issue)
UC Character string with null termination. Valid values are:
UC10 10-character string with null termination (11 bytes max)
UC20 20-character string with null termination (21 bytes max)
UC30 30-character string with null termination (31 bytes max)
UC40 40-character string with null termination (41 bytes max)
Unsigned integer; the numeric value indicates the number of bits (for
UINT
example, UINT16 is a 16-bit unsigned integer)
Unknown Data type is unknown
Range Indicates the range of possible values for the parameter (if applicable). This value uses the
format [InstanceNumber]-[RangeLow}->[RangeHigh], where 3 – 1->1 means the third
instance has a range of 1 through 7
Default Indicates the default value for the parameter.
Default Measurement Indicates (for ENUM16 and BIN data types) the measurement type used for possible values.
Type For other data types, indicates the default units for the parameter and the associated
measurement type.
Access (by Role) Indicates the overall accessibility of the parameter by role. Valid values are R/O (the
parameter can only be read) and R/W (the parameter can be modified if the user has the
proper role access).
Version Indicates the version at which the parameter was introduced.
Other Attributes Identifies any other attributes associated with the parameter. Values can include:
Log Changes The system logs any changes to the parameter in the Event log.
This parameter affects the calculation of flow rates, totals, and/or
Legal averages. The system logs any user changes to this parameter to the legal
event log.
278 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Field Description
Changing the parameter value requires additional verification by the
system (beyond range checking). When a new value is written to the
Verified parameter, it updates the parameter status to indicate the value is
undergoing verification. Once verification is complete, the system updates
the parameter status to indicate the value has been verified.
Non- Value is set and used only at runtime and does not persist across
persistent warm/cold starts or power cycles.
Object Parameter Listing 279
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.3 Action Blk Parameters
Description: The Action Blk object provides the parameters for configuring programming components that check a
basic logic condition and use the result to activate effects or perform other actions.
Number of Instances: Between 0 and 100 instances may exist; by default, 48 instances exist.
Storage Location: Saved to internal configuration memory.
Table 5-2: Action Blk Parameters
Action Blk
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX Log Changes
“Action Blk_X” Admin; Engineer
(where X is R/O:
instance number Meas. Tech;
between 1 and Operator; Auditor
100)
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX Log Changes
0 - Normal (80) Admin; Engineer
1 - In Alarm Meas. Tech;
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 Instance: R/W: 2.0.0.XXX Log Changes
“Action Blk_X” Admin; Engineer
(where X is R/O:
instance number Meas. Tech;
between 1 and Operator; Auditor
100)
280 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Action Blk
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
ACTION_BLK_ Enable Switch ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX Log Changes
ENABLE 0 - Disable Selection (30) Admin; Engineer
1 - Enable R/O:
Meas. Tech;
Operator; Auditor
ACTION_BLK_ Action Block Activation ENUM16 01 Inactive (0) Action Block R/O: 2.0.0.XXX
STATUS Status Status (166) Admin; Engineer
0 - Inactive Meas. Tech;
1 - Active Operator; Auditor
VAR_1_DESC Variable 1 Description UC20 R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
VAR_1_POINT Variable 1 Input ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
VAR_1_VAL Variable 1 Value FLOAT 0 R/W: 2.0.0.XXX
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
VAR_2_DESC Variable 2 Description UC20 R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
Object Parameter Listing 281
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Action Blk
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
VAR_2_POINT Variable 2 Input ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
VAR_2_VAL Variable 2 Value FLOAT 0 R/W: 2.0.0.XXX
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
OPERATOR Operator ENUM16 09 Greater Than (0) Action Block R/W: 2.0.0.XXX Log Changes
0 - Greater Than Operators (167) Admin; Engineer
1 - Less Than R/O:
2 - Equal To Meas. Tech;
3 - Greater Than Or Equal To Operator; Auditor
4 - Not Equal To
5 - Less Than Or Equal To
6 - AND (Bitwise)
7 - OR (Bitwise)
8 - Watchdog
9 - Soft Timer
RESULT_DEADBAN Deadband EU FLOAT 0 0 R/W: 2.0.0.XXX Log Changes
D Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
TRIP_STATUS Basic Logic Block Status ENUM16 01 Inactive (0) Action Block R/O: 2.0.0.XXX
0 - Inactive Status (166) Admin; Engineer
1 - Active Meas. Tech;
Operator; Auditor
282 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Action Blk
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
DELAY_SEC Activation Delay UINT16 0 s (17-0) R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
ELAPSED_SEC Elapsed Delay UINT16 0 s (17-0) R/O: 2.0.0.XXX
Admin; Engineer
Meas. Tech;
Operator; Auditor
BYPASSES_ACTIVE Current Bypasses Active BIN8 None Current R/O: 2.0.0.XXX
0 - None Bypasses Active Admin; Engineer
1 - Local Latched (218) Meas. Tech;
2 - Remote Latched Operator; Auditor
3 - Class B
4 - Class C
5 - Class B/C
BYPASS_LOCAL On Demand Local Bypass ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX Log Changes
0 - Disable Selection (30) Admin; Engineer
1 - Enable R/O:
Meas. Tech;
Operator; Auditor
REMOTE_BYPASS_ Block 1 UINT16 0 48 0 R/W: 2.0.0.XXX Log Changes
BLK_1 Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
REMOTE_BYPASS_ Type ENUM16 03 Latched (0) Action Block R/W: 2.0.0.XXX Log Changes
TYPE_1 0 - Latched Bypass Types Admin; Engineer
1 - Class B (168) R/O:
2 - Class C Meas. Tech;
3 - Class B / C Operator; Auditor
REMOTE_BYPASS_ Block 2 UINT16 0 48 0 R/W: 2.0.0.XXX Log Changes
BLK_2 Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
Object Parameter Listing 283
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Action Blk
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
REMOTE_BYPASS_ Type ENUM16 03 Latched (0) Action Block R/W: 2.0.0.XXX Log Changes
TYPE_2 0 - Latched Bypass Types Admin; Engineer
1 - Class B (168) R/O:
2 - Class C Meas. Tech;
3 - Class B / C Operator; Auditor
REMOTE_BYPASS_ Block 3 UINT16 0 48 0 R/W: 2.0.0.XXX Log Changes
BLK_3 Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
REMOTE_BYPASS_ Type ENUM16 03 Latched (0) Action Block R/W: 2.0.0.XXX Log Changes
TYPE_3 0 - Latched Bypass Types Admin; Engineer
1 - Class B (168) R/O:
2 - Class C Meas. Tech;
3 - Class B / C Operator; Auditor
CLASS_B_DELAY_ Preset Delay Time UINT16 300 s (17-0) R/W: 2.0.0.XXX Log Changes
SEC Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
CLASS_B_ELAPSED_ Elapsed Time UINT16 0 s (17-0) R/O: 2.0.0.XXX
SEC Admin; Engineer
Meas. Tech;
Operator; Auditor
CLASS_C_ Deadband EU FLOAT 0 R/W: 2.0.0.XXX Log Changes
DEADBAND Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
CLASS_C_DELAY_ Preset Delay Time UINT16 10 s (17-0) R/W: 2.0.0.XXX Log Changes
SEC Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
284 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Action Blk
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
CLASS_C_ELAPSED_ Elapsed Time UINT16 0 s (17-0) R/O: 2.0.0.XXX
SEC Admin; Engineer
Meas. Tech;
Operator; Auditor
BYPASS_BLK_ Bypass Block Trip Status ENUM16 0 > 1 Inactive (0) Action Block R/O: 2.0.0.XXX
STATUS 0 - Inactive Status (166) Admin; Engineer
1 - Active Meas. Tech;
Operator; Auditor
CHAIN_BLK Chain To Action Block UINT8 0 48 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
CHAIN_TO_BLK_ Chain To Block Status ENUM16 02 Output Status (2) Action Block R/W: 2.0.0.XXX
STATUS 0 - Block Status Chain To Status Admin; Engineer
1 - Chain Status (217) R/O:
2 - Output Status Meas. Tech;
Operator; Auditor
CHAIN_TYPE Logic Type ENUM16 02 AND (0) Action Block R/W: 2.0.0.XXX Log Changes
0 - AND Chain Type (216) Admin; Engineer
1 - OR R/O:
2 - NAND Meas. Tech;
Operator; Auditor
CHAIN_FIRST_OUT Chain First Out Block UINT16 0 R/W: 2.0.0.XXX
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
CHAIN_IS_END End Of Chain ENUM16 01 No (0) Yes/No Option R/W: 2.0.0.XXX Log Changes
0 - No (208) Admin; Engineer
1 - Yes R/O:
Meas. Tech;
Operator; Auditor
Object Parameter Listing 285
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Action Blk
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
CHAIN_DELAY_SEC Preset Delay Time UINT16 0 s (17-0) R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
CHAIN_ELAPSED_ Elapsed Time UINT16 0 s (17-0) R/O: 2.0.0.XXX
SEC Admin; Engineer
Meas. Tech;
Operator; Auditor
CHAIN_BLK_STATU Chain Block Trip Status ENUM16 01 Inactive (0) Action Block R/O: 2.0.0.XXX
S 0 - Inactive Status (166) Admin; Engineer
1 - Active Meas. Tech;
Operator; Auditor
ALARM_LOG_ Alarm Logging Option BIN8 None Action Block R/W: 2.0.0.XXX Log Changes
OPTION 0 - None Alarm Option Admin; Engineer
1 - Alarm on Active (169) R/O:
2 - Alarm on Inactive Meas. Tech;
Operator; Auditor
ALARM_TYPE Alarm Type ENUM16 05 Low (0) Action Block R/W: 2.0.0.XXX Log Changes
0 - Low Alarm Type (215) Admin; Engineer
1 - Low Low R/O:
2 - High Meas. Tech;
3 - High High Operator; Auditor
4 - Rate of Change
5 - Other
EVENT_LOG_OPTIO Event Logging Option BIN8 None Action Block R/W: 2.0.0.XXX Log Changes
N 0 - None Event Option Admin; Engineer
1 - Event on Active (170) R/O:
2 - Event on Inactive Meas. Tech;
Operator; Auditor
EVENT_LOG_ Event Description UC40 Instance: R/W: 2.0.0.XXX Log Changes
MESSAGE “Action Blk_X” Admin; Engineer
(where X is R/O:
instance number Meas. Tech;
between 1 and Operator; Auditor
100)
286 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Action Blk
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
ACTION_TRIP_EVEN Condition to Trip Action ENUM16 03 True If Block True Action Block Trip R/W: 2.0.0.XXX Log Changes
T Block (0) Logic (171) Admin; Engineer
0 - True If Block True R/O:
1 - True If Chain True Meas. Tech;
2 - True If Either True Operator; Auditor
3 - True If Both True
ACTION_TRIP_ Output Block Trip Status ENUM16 01 Inactive (0) Action Block R/O: 2.0.0.XXX
STATUS 0 - Inactive Status (166) Admin; Engineer
1 - Active Meas. Tech;
Operator; Auditor
ACTION_TYPE Output Type Triggered ENUM16 05 No Action (0) Action Block R/W: 2.0.0.XXX Log Changes
0 - No Action Action Type (172) Admin; Engineer
1 - Effect R/O:
2 - Binary Action Meas. Tech;
3 - Move Value Operator; Auditor
4 - Load Value
5 - Write Value
ACTION_POINT Output Action Point ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
ACTION_DO_ Boolean Behavior ENUM16 09 Force 1 True & 0 Discrete Action R/W: 2.0.0.XXX Log Changes
BEHAVIOR 0 - Force 1 True & 0 False False (0) Type (173) Admin; Engineer
1 - Force 0 True & 1 False R/O:
2 - Poke 1 True Meas. Tech;
3 - Poke 0 True Operator; Auditor
4 - Poke 1 True & 0 False
5 - Poke 0 True & 1 False
6 - Force 1 True & Poke 0
False
7 - Force 0 True & Poke 1
False
8 - Force 1 True
9 - Force 0 True
Object Parameter Listing 287
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Action Blk
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
LINK_1_EFFECT Effect 1 ENUM16 0 100 0 R/W: 2.0.0.XXX Log Changes
0 - Disable Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
LINK_2_EFFECT Effect 2 ENUM16 0 100 0 R/W: 2.0.0.XXX Log Changes
0 - Disable Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
LINK_3_EFFECT Effect 3 ENUM16 0 100 0 R/W: 2.0.0.XXX Log Changes
0 - Disable Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
LINK_4_EFFECT Effect 4 ENUM16 0 100 0 R/W: 2.0.0.XXX Log Changes
0 - Disable Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
LINK_5_EFFECT Effect 5 ENUM16 0 100 0 R/W: 2.0.0.XXX Log Changes
0 - Disable Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
LINK_6_EFFECT Effect 6 ENUM16 0 100 0 R/W: 2.0.0.XXX Log Changes
0 - Disable Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
288 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Action Blk
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
LINK_7_EFFECT Effect 7 ENUM16 0 100 0 R/W: 2.0.0.XXX Log Changes
0 - Disable Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
LINK_8_EFFECT Effect 8 ENUM16 0 100 0 R/W: 2.0.0.XXX Log Changes
0 - Disable Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
LINK_9_EFFECT Effect 9 ENUM16 0 100 0 R/W: 2.0.0.XXX Log Changes
0 - Disable Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
LINK_10_EFFECT Effect 10 ENUM16 0 100 0 R/W: 2.0.0.XXX Log Changes
0 - Disable Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
LINK_11_EFFECT Effect 11 ENUM16 0 100 0 R/W: 2.0.0.XXX Log Changes
0 - Disable Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
LINK_12_EFFECT Effect 12 ENUM16 0 100 0 R/W: 2.0.0.XXX Log Changes
0 - Disable Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
Object Parameter Listing 289
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Action Blk
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
LINK_13_EFFECT Effect 13 ENUM16 0 100 0 R/W: 2.0.0.XXX Log Changes
0 - Disable Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
LINK_14_EFFECT Effect 14 ENUM16 0 100 0 R/W: 2.0.0.XXX Log Changes
0 - Disable Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
LINK_15_EFFECT Effect 15 ENUM16 0 100 0 R/W: 2.0.0.XXX Log Changes
0 - Disable Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
LINK_16_EFFECT Effect 16 ENUM16 0 100 0 R/W: 2.0.0.XXX Log Changes
0 - Disable Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
DELAY_SEC_LONG Activation Delay Long UINT32 0 s (17-0) R/W: 2.3.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
ELAPSED_SEC_LON Elapsed Delay Long UINT32 0 s (17-0) R/O: 2.3.0.XXX
G Admin; Engineer
Meas. Tech;
Operator; Auditor
LINK_17_EFFECT Effect 17 ENUM16 0 100 0 R/W: 2.3.0.XXX Log Changes
0 - Disable Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
290 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Action Blk
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
LINK_18_EFFECT Effect 18 ENUM16 0 100 0 R/W: 2.3.0.XXX Log Changes
0 - Disable Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
LINK_19_EFFECT Effect 19 ENUM16 0 100 0 R/W: 2.3.0.XXX Log Changes
0 - Disable Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
LINK_20_EFFECT Effect 20 ENUM16 0 100 0 R/W: 2.3.0.XXX Log Changes
0 - Disable Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
Object Parameter Listing 291
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.4 AI Parameters
Description: The AI object provides the parameters for configuring analog inputs.
Number of Instances: 248 instances may exist (8 for each MIO module).
Storage Location: Saved to internal configuration memory.
Table 5-3: AI Parameters
AI
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
MOD_LOC Module Location UINT8 Varies by instance R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
CHANNEL Channel UINT8 Varies by instance R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
292 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
AI
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
DESC Description UC20 Varies by instance R/O: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Operator; Auditor
UNITS Units ENUM16 0 35 0% Ratio (18) R/W: 2.0.0.XXX ▪ Log Changes
0-% Admin; Engineer; ▪ Legal
2 - ppm Meas. Tech
R/O:
Operator; Auditor
UNITS_TYPE Unit Enumeration Selection ENUM16 0306 Percentage (18) AI Units Type R/W: 2.0.0.XXX ▪ Log Changes
0 - Unitless (178) Admin; Engineer; ▪ Legal
2 - Absolute Pressure Meas. Tech
3 - Temperature R/O:
4 - Density Operator; Auditor
5 - Volume Heating Value
6 - Dynamic Viscosity
7 - Linear (Short)
8 - Linear (Long)
12 - Volume Rate
13 - Mass Rate
14 - Energy Rate
15 - Current
16 - Voltage
18 - Percentage
19 - Acceleration
21 - Water Content
23 - Resistance
26 - Differential Pressure
29 - Gauge Pressure
225 - Mass Heating Value
306 - Relative Density
Object Parameter Listing 293
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
AI
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
CONV_TYPE Current/Voltage Selection ENUM16 02 Disabled (2) AI Resistor R/W: 2.0.0.XXX ▪ Log Changes
0 - Current Selection (124) Admin; Engineer; ▪ Legal
1 - Voltage Meas. Tech
2 - Disabled R/O:
Operator; Auditor
RAW Raw Value UINT32 0 A/D Counts R/O: 2.0.0.XXX Legal
(127-0) Admin; Engineer;
Meas. Tech
Operator; Auditor
LIVE Live Value FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
OVRD Override Value FLOAT 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FAULT Fault Value FLOAT 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
LAST_GOOD Last Good Value FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
SELECTED Selected Value FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
294 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
AI
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
USER_MODE Operation Mode ENUM16 01 Live (0) User Selection R/W: 2.0.0.XXX ▪ Log Changes
0 - Live (31) Admin; Engineer; ▪ Legal
1 - Override Meas. Tech
R/O:
Operator; Auditor
FAULT_MODE Fault Mode ENUM16 01 Fault (0) IO Fault R/W: 2.0.0.XXX ▪ Log Changes
0 - Fault Selection (136) Admin; Engineer; ▪ Legal
1 - Last Good Meas. Tech
R/O:
Operator; Auditor
ACTUAL_MODE Actual Mode ENUM16 Live (0) Actual Mode R/O: 2.0.0.XXX Legal
0 - Live (125) Admin; Engineer;
1 - Auto Meas. Tech
2 - Auto Read Operator; Auditor
3 - Override
4 - Calibration
5 - Fault
6 - Last Good
7 - Last Hour Average
8 -Ramp to Fault Value
9 - Ramp to Last Hour Avg
DAMPING_FACTOR Damping Time FLOAT 0 60 0 s (17-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
CLIP_MODE Clipping Mode ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX ▪ Log Changes
0 - Disable Selection (30) Admin; Engineer; ▪ Legal
1 - Enable Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 295
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
AI
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
CLIP_HIGH_LIMIT High Clipping Limit FLOAT 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech ▪ Verified
R/O:
Operator; Auditor
CLIP_LOW_LIMIT Low Clipping Limit FLOAT 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech ▪ Verified
R/O:
Operator; Auditor
AVG_PERIOD Averaging Period FLOAT 0.25 1 s (17-0) R/W: 2.0.0.XXX ▪ Log Changes
60 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
ALM_OBJ Alarm Reference ObjectRef Varies by instance R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
URL Upper Range Limit UINT32 0 A/D Counts R/O: 2.0.0.XXX Legal
(127-0) Admin; Engineer;
Meas. Tech
Operator; Auditor
LRL Lower Range Limit UINT32 0 A/D Counts R/O: 2.0.0.XXX Legal
(127-0) Admin; Engineer;
Meas. Tech
Operator; Auditor
LOW_EU Low Reading EU FLOAT 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech ▪ Verified
R/O:
Operator; Auditor
296 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
AI
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
HIGH_EU High Reading EU FLOAT 100 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech ▪ Verified
R/O:
Operator; Auditor
AI_RAW_0_PERCENT Adjusted A/D 0 Percent UINT32 0 A/D Counts R/W: 2.0.0.XXX ▪ Log Changes
(127-0) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
AI_RAW_100_ Adjusted A/D 100 Percent UINT32 0 A/D Counts R/W: 2.0.0.XXX ▪ Log Changes
PERCENT (127-0) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
MFG_STATUS Factory Calibration Status ENUM16 Invalid (0) Factory R/O: 2.0.0.XXX Legal
0 - Invalid Calibration Admin; Engineer;
1 - Valid Status (128) Meas. Tech
Operator; Auditor
MFG_DATE_TIME Factory Calibration Date Time 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
SCALE_MODE EU Scaling Mode ENUM16 01 Multi-Point EU Scaling Mode R/W: 2.0.0.XXX ▪ Log Changes
0 - Multi-Point Calibration Calibration (0) (221) Admin; Engineer; ▪ Legal
1 - EU Scaling Meas. Tech
R/O:
Operator; Auditor
CAL_OBJ Calibration Reference ObjectRef Varies by instance R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
Object Parameter Listing 297
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
AI
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
INPUT_STATUS Input Health Status BIN16 Normal AI Status (129) R/O: 2.0.0.XXX Legal
0 - Normal Admin; Engineer;
1 - Not Licensed Meas. Tech
2 - Instance Inactive Operator; Auditor
3 - Comm Fail
4 - Override Active
5 - In Alarm
6 - Point Fail
7 - Above Calibration Limit
8 - Below Calibration Limit
9 - Input Frozen
10 - Input Clipped
11 - Factory Calibration
Invalid
12 - User Calibration Invalid
13 - Disabled
14 - Termination Missing
15 - Hardware Fail
LAST_HOUR_ Last Hour Average Value Float 0 % (18-0) R/O: 2.5.0.XXX Legal
AVERAGE Admin; Engineer;
Meas. Tech;
Operator; Auditor"
RAMP_DURATION Ramp Duration Float 0 60 0 s (17-0) R/W: 2.5.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
298 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.5 AICal Parameters
Description: The AICal object provides the parameters for analog input calibration.
Number of Instances: 248 instances may exist (8 for each MIO module).
Storage Location: Saved to internal configuration memory.
Table 5-4: AICal Parameters
AICal
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
MOD_LOC Module Location UINT8 Varies by instance R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
CHANNEL Channel UINT8 Varies by instance R/O: 2.0.0.XXX Legal
Admin; Engineer;
Object Parameter Listing 299
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
AICal
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
Operator; Auditor
DESC Description UC20 Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
TIMEOUT Inactivity Timeout UINT16 1- 60 min (17-1) R/W: 2.0.0.XXX ▪ Log Changes
1440 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
TO_TIME_ Remaining Time Before UINT16 0 min (17-1) R/O: 2.0.0.XXX Legal
REMAINING Timeout Admin; Engineer;
Meas. Tech
Operator; Auditor
LAST_CAL Time of Last Calibration Time Undefined R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
ZERO_SHIFT Zero Shift FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
USER_ZERO_VAL Calibrated Zero FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
USER_SPAN_VAL Calibrated Span FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
300 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
AICal
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
Operator; Auditor
USER_MID1_VAL Calibrated Midpoint 1 FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
USER_MID2_VAL Calibrated Midpoint 2 FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
USER_MID3_VAL Calibrated Midpoint 3 FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
IDEAL_ZERO_VAL Ideal Zero UINT32 0 A/D Counts R/O: 2.0.0.XXX Legal
(127-0) Admin; Engineer;
Meas. Tech
Operator; Auditor
IDEAL_SPAN_VAL Ideal Span UINT32 0 A/D Counts R/O: 2.0.0.XXX Legal
(127-0) Admin; Engineer;
Meas. Tech
Operator; Auditor
IDEAL_MID1_VAL Ideal Midpoint 1 UINT32 0 A/D Counts R/O: 2.0.0.XXX Legal
(127-0) Admin; Engineer;
Meas. Tech
Operator; Auditor
IDEAL_MID2_VAL Ideal Midpoint 2 UINT32 0 A/D Counts R/O: 2.0.0.XXX Legal
(127-0) Admin; Engineer;
Meas. Tech
Operator; Auditor
Object Parameter Listing 301
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
AICal
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
IDEAL_MID3_VAL Ideal Midpoint 3 UINT32 0 A/D Counts R/O: 2.0.0.XXX Legal
(127-0) Admin; Engineer;
Meas. Tech
Operator; Auditor
CAL_STATUS Calibration Status BIN16 Calibration Not In Calibration R/O: 2.0.0.XXX Legal
0 - Calibration Not In Progress Status (150) Admin; Engineer;
Progress Meas. Tech
1 - Input Frozen Operator; Auditor
2 - Calibration In Progress
3 - Reserved
4 - Set Command Failed
5 - Timeout Ocurred
6 - Span Too Small
7 - Excess Correction
8 - Passed Parameter Too
Small
9 - Passed Parameter Too
Large
10 - Ideal Value Too Small
11 - Ideal Value Too Large
12 - Wrong Command
13 - Verification In Progress
VER_DATE Time of Last Verification Time 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
VER_PT1_FOUND Verification Point 1 As Found FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
302 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
AICal
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
VER_PT2_FOUND Verification Point 2 As Found FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
VER_PT3_FOUND Verification Point 3 As Found FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
VER_PT4_FOUND Verification Point 4 As Found FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
VER_PT5_FOUND Verification Point 5 As Found FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
VER_PT6_FOUND Verification Point 6 As Found FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
VER_PT7_FOUND Verification Point 7 As Found FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
VER_PT1_LEFT Verification Point 1 As Left FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
VER_PT2_LEFT Verification Point 2 As Left FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Object Parameter Listing 303
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
AICal
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
Operator; Auditor
VER_PT3_LEFT Verification Point 3 As Left FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
VER_PT4_LEFT Verification Point 4 As Left FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
VER_PT5_LEFT Verification Point 5 As Left FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
VER_PT6_LEFT Verification Point 6 As Left FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
VER_PT7_LEFT Verification Point 7 As Left FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
CAL_COMMAND Calibration command ENUM16 Unfreeze (10) Calibration R/O: 2.0.0.XXX Legal
0 - None Command (149) Admin; Engineer;
1 - Freeze Meas. Tech
2 - Start Calibration
Operator; Auditor
3 - Set Zero
4 - Set Span
5 - Set Mid1
6 - Set Mid2
7 - Set Mid3
8 - Set Zero Shift
304 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
AICal
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
9 - Save Calibration
10 - Unfreeze
11 - Cancel Calibration
12 - Restore Factory Defaults
13 - Start Verification
14 - Set Verification Pt1
15 - Set Verification Pt2
16 - Set Verification Pt3
17 - Set Verification Pt4
18 - Set Verification Pt5
19 - Set Verification Pt6
20 - Set Verification Pt7
21 - Verification Done
22 - Restored Successfully
23 - Restore Failed
Object Parameter Listing 305
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.6 Alarm Parameters
Description: The Alarm object provides the parameters for configuring and viewing alarms.
Number of Instances: 627 instances may exist (varies with the I/O configuration and number of meter runs)
Storage Location: Saved to internal configuration memory.
Table 5-5: Alarm Parameters
Alarm
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
ALM_DESC Alarm Description UC20 Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
ALM_VAL_PARAM Value to Alarm ParamRef Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
306 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Alarm
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
LO_ENB Low Alarm Enable ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX ▪ Log Changes
0 - Disable Selection (30) Admin; Engineer; ▪ Legal
1 - Enable Meas. Tech
R/O:
Operator; Auditor
LO_LIM Low Alarm Limit FLOAT 0 Instance: R/W: 2.0.0.XXX ▪ Log Changes
1-24: Admin; Engineer; ▪ Legal
MCF/d (12-7) Meas. Tech;
25 -100: Operator;
RESERVED R/O:
101-124: Auditor
MCF/d (12-7)
125-300:
RESERVED
301-324:
MCF/d (12-7)
325-438:
RESERVED
LO_ST Low Alarm Status ENUM16 01 Normal (0) Alarm Status R/O: 2.0.0.XXX Legal
0 - Normal (254) Admin; Engineer;
1 - In Alarm Meas. Tech;
Operator; Auditor
LO_PRI Low Alarm Priority UINT8 06 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
LOLO_ENB Low Low Alarm Enable ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX ▪ Log Changes
0 - Disable Selection (30) Admin; Engineer; ▪ Legal
1 - Enable Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 307
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Alarm
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
LOLO_LIM Low Low Alarm Limit FLOAT 0 Instance: R/W: 2.0.0.XXX ▪ Log Changes
1-24: Admin; Engineer; ▪ Legal
MCF/d (12-7) Meas. Tech;
25-100: Operator
RESERVED R/O:
101-124: Auditor
MCF/d (12-7)
125-300:
RESERVED
301-324:
MCF/d (12-7)
325-438:
RESERVED
LOLO_ST Low Low Alarm Status ENUM16 01 Normal (0) Alarm Status R/O: 2.0.0.XXX Legal
0 - Normal (254) Admin; Engineer;
1 - In Alarm Meas. Tech
Operator; Auditor
LOLO_PRI Low Low Alarm Priority UINT8 06 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
HI_ENB High Alarm Enable ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX ▪ Log Changes
0 - Disable Selection (30) Admin; Engineer; ▪ Legal
1 - Enable Meas. Tech
R/O:
Operator; Auditor
HI_LIM High Alarm Limit FLOAT 10000 Instance: R/W: 2.0.0.XXX ▪ Log Changes
1-24: Admin; Engineer; ▪ Legal
MCF/d (12-7) Meas. Tech;
25-100: Operator
RESERVED R/O: Auditor
101-124:
MCF/d (12-7)
125-300:
308 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Alarm
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
RESERVED
301-324:
MCF/d (12-7)
325-438:
RESERVED
HI_ST High Alarm Status ENUM16 01 Normal (0) Alarm Status R/O: 2.0.0.XXX Legal
0 - Normal (254) Admin; Engineer;
1 - In Alarm Meas. Tech
Operator; Auditor
HI_PRI High Alarm Priority UINT8 06 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
HIHI_ENB High High Alarm Enable ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX ▪ Log Changes
0 - Disable Selection (30) Admin; Engineer; ▪ Legal
1 - Enable Meas. Tech
R/O:
Operator; Auditor
HIHI_LIM High High Alarm Limit FLOAT 10000 Instance: R/W: 2.0.0.XXX ▪ Log Changes
1-24: Admin; Engineer; ▪ Legal
MCF/d (12-7) Meas. Tech;
25-100: Operator
RESERVED R/O:
101-124: Auditor
MCF/d (12-7)
125-300:
RESERVED
301-324:
MCF/d (12-7)
325-438:
RESERVED
HIHI_ST High High Alarm Status ENUM16 0 1 Normal (0) Alarm Status R/O: 2.0.0.XXX Legal
0 - Normal (254) Admin; Engineer;
1 - In Alarm
Object Parameter Listing 309
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Alarm
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
Operator; Auditor
HIHI_PRI High High Alarm Priority UINT8 06 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
ROC_MODE Rate of Change Alarm Mode ENUM16 03 Disabled (0) Rate of Change R/W: 2.0.0.XXX ▪ Log Changes
0 - Disabled Alarm Mode Admin; Engineer; ▪ Legal
1 - Alarm on Positive (195) Meas. Tech
Changes R/O:
2 - Alarm on Negative Operator; Auditor
Changes
3 - Alarm on Both
ROC_LIM Rate of Change Limit FLOAT 0 100 Instance: R/W: 2.0.0.XXX ▪ Log Changes
1-24: Admin; Engineer; ▪ Legal
MCF/d (12-7) Meas. Tech;
25-100: Operator
RESERVED R/O: Auditor
101-124:
MCF/d (12-7)
125-300:
RESERVED
301-324:
MCF/d (12-7)
325-438:
RESERVED
ROC_TM Rate of Change Time Period FLOAT 1 1 s (17-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
ROC_ST Rate of Change Alarm Status ENUM16 0→1 Normal (0) Alarm Status R/O: 2.0.0.XXX Legal
0 - Normal (254) Admin; Engineer;
1 - In Alarm
310 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Alarm
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
Operator; Auditor
ROC_PRI Rate of Change Alarm UINT8 0→6 0 R/W: 2.0.0.XXX Log Changes
Priority Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
PF_ENB Point Failure Enable ENUM16 0→1 Enable (1) Enable/Disable R/W: 2.0.0.XXX ▪ Log Changes
0 - Disable Selection (30) Admin; Engineer; ▪ Legal
1 - Enable Meas. Tech
R/O:
Operator; Auditor
PF_ST Point Failure Alarm Status ENUM16 0→1 Normal (0) Alarm Status R/O: 2.0.0.XXX Legal
0 - Normal (254) Admin; Engineer;
1 - In Alarm Meas. Tech
Operator; Auditor
PF_PRI Point Failure Priority UINT8 0→6 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DEADBAND Alarm Deadband FLOAT 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
PROCESS_ALM Composite Alarm Status BIN8 Normal Composite Alarm R/O: 2.0.0.XXX Legal
0 - Normal Status (45) Admin; Engineer;
1 - Low Meas. Tech
2 - Low Low Operator; Auditor
3 - High
4 - High High
5 - Rate of Change
6 - Point Fail
Object Parameter Listing 311
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Alarm
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
SUP_PROC Suppress Process Alarm(s) ENUM16 0→1 Off (0) Alarm Suppress R/W: 2.0.0.XXX ▪ Log Changes
0 - Off State (266) Admin; Engineer; ▪ Legal
1 - On Meas. Tech
R/O:
Operator; Auditor
SUP_SYS Suppress System Alarm(s) ENUM16 0→1 Off (0) Alarm Suppress R/W: 2.0.0.XXX ▪ Log Changes
0 - Off State (266) Admin; Engineer; ▪ Legal
1 - On Meas. Tech
R/O:
Operator; Auditor
312 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.7 AO Parameters
Description: The AO object provides the parameters for configuring analog outputs.
Number of Instances: 14 instances may exist (2 per MIO module).
Storage Location: Saved to internal configuration memory.
Table 5-6: AO Parameters
AO
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Varies by instance R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 0→5 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
MOD_LOC Module Location UINT8 Varies by instance R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
Object Parameter Listing 313
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
AO
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
CHANNEL Channel UINT8 Varies by instance R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
DESC Description UC20 Varies by instance R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
UNITS Units ENUM16 0→35 0% Ratio (18) R/W: 2.0.0.XXX Log Changes
0-% Admin; Engineer;
2 - ppm Meas. Tech
R/O:
Operator; Auditor
UNITS_TYPE Unit Enumeration Selection ENUM16 0→306 Percentage (18) AO Units Type R/W: 2.0.0.XXX Log Changes
0 - Unitless (179) Admin; Engineer;
2 - Absolute Pressure Meas. Tech
3 - Temperature R/O:
4 - Density Operator; Auditor
5 - Volume Heating Value
6 - Dynamic Viscosity
7 - Linear (Short)
8 - Linear (Long)
12 - Volume Rate
13 - Mass Rate
14 - Energy Rate
15 - Current
16 - Voltage
18 - Percentage
314 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
AO
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
19 - Acceleration
23 - Resistance
26 - Differential Pressure
29 - Gauge Pressure
225 - Mass Heating Value
RAW Raw Value UINT32 0 D/A Counts (127- R/O: 2.0.0.XXX
1) Admin; Engineer;
Meas. Tech
Operator; Auditor
AUTO Auto Value FLOAT 0 % (18-0) R/W: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OVRD Override Value FLOAT 0 % (18-0) R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
AUTO_READ_VAL Auto Read Value FLOAT 0 % (18-0) R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
AUTO_READ_PARA Auto Read Parameter ParamRef Undefined R/W: 2.0.0.XXX Log Changes
M Reference Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
FAULT Fault Value FLOAT 0 % (18-0) R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
LAST_GOOD Last Good Value FLOAT 0 % (18-0) R/O: 2.0.0.XXX
Admin; Engineer;
Object Parameter Listing 315
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
AO
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
Operator; Auditor
SELECTED Selected Value FLOAT 0 % (18-0) R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
USER_MODE Operation Mode ENUM16 0→2 Auto (0) IO Output User R/W: 2.0.0.XXX Log Changes
0 - Auto Selection (131) Admin; Engineer;
1 - Override Meas. Tech
2 - Auto Read R/O:
Operator; Auditor
FAULT_MODE Fault Mode ENUM16 0→4 Last Good (1) IO Fault Selection R/W: 2.0.0.XXX Log Changes
0 - Fault (136) Admin; Engineer;
1 - Last Good Meas. Tech
2 - Last Hour Average R/O:
3 – Ramp to Fault Value Operator; Auditor
4 – Ramp to Last Hour Avg
ACTUAL_MODE Actual Mode ENUM16 Live (0) Actual Mode R/O: 2.0.0.XXX
0 - Live (125) Admin; Engineer;
1 - Auto Meas. Tech
2 - Auto Read Operator; Auditor
3 - Override
4 - Calibration
5 - Fault
6 - Last Good
7 - Last Hour Average
8 – Ramp to Fault Value
9 – Ramp to Last Hour Avg
CLIP_MODE Clipping Mode ENUM16 0→1 Disable (0) Enable/Disable R/W: 2.0.0.XXX Log Changes
0 - Disable Selection (30) Admin; Engineer;
1 - Enable Meas. Tech
R/O:
Operator; Auditor
CLIP_HIGH_LIMIT High Clipping Limit FLOAT 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Verified
316 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
AO
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
R/O:
Operator; Auditor
CLIP_LOW_LIMIT Low Clipping Limit FLOAT 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Verified
Meas. Tech
R/O:
Operator; Auditor
ALM_OBJ Alarm Reference ObjectRef Varies by instance R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
URL Upper Range Limit UINT32 0 D/A Counts (127- R/O: 2.0.0.XXX
1) Admin; Engineer;
Meas. Tech
Operator; Auditor
LRL Lower Range Limit UINT32 0 D/A Counts (127- R/O: 2.0.0.XXX
1) Admin; Engineer;
Meas. Tech
Operator; Auditor
LOW_EU Low Reading EU FLOAT 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Verified
Meas. Tech
R/O:
Operator; Auditor
HIGH_EU High Reading EU FLOAT 100 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Verified
Meas. Tech
R/O:
Operator; Auditor
AO_RAW_0_ Adjusted D/A 0 Percent UINT32 0 D/A Counts (127- R/W: 2.0.0.XXX Log Changes
PERCENT 1) Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 317
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
AO
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
AO_RAW_100_ Adjusted D/A 100 Percent UINT32 0 D/A Counts (127- R/W: 2.0.0.XXX Log Changes
PERCENT 1) Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
MFG_STATUS Factory Calibration Status ENUM16 Invalid (0) Factory R/O: 2.0.0.XXX
0 - Invalid Calibration Admin; Engineer;
1 - Valid Status (128) Meas. Tech
Operator; Auditor
MFG_DATE_TIME Factory Calibration Date Time 0 R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
SCALE_MODE EU Scaling Mode ENUM16 0→1 Multi-Point EU Scaling Mode R/W: 2.0.0.XXX Log Changes
0 - Multi-Point Calibration Calibration (0) (221) Admin; Engineer;
1 - EU Scaling Meas. Tech
R/O:
Operator; Auditor
OUTPUT_STATUS Output Health Status BIN16 Normal AO Status (130) R/O: 2.0.0.XXX
0 - Normal Admin; Engineer;
1 - Not Licensed Meas. Tech
2 - Instance Inactive Operator; Auditor
3 - Comm Fail
4 - Override Active
5 - In Alarm
6 - Point Fail
7 - Above URL
8 - Below LRL
9 – RESERVED
10 - Output Clipped
11 - Factory Calibration
Invalid
12 - Auto Read Parameter
Invalid
13 - AO Readback Failure
318 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
AO
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
14 - Termination Missing
15 - Disabled
16 - Hardware Fail
RESET_MODE Action on Power Cycle ENUM16 0→1 Last Good (1) IO Fault Selection R/W: 2.0.0.XXX Log Changes
0 - Fault (136) Admin; Engineer;
1 - Last Good Meas. Tech
R/O:
Operator; Auditor
CONV_TYPE Current/Voltage Selection ENUM16 0→2 Disabled (2) AI Resistor R/W: 2.0.0.XXX ▪ Log Changes
0 - Current Selection (124) Admin; Engineer; ▪ Verified
1 - Voltage Meas. Tech
2 - Disabled R/O:
Operator; Auditor
LAST_HOUR_ Last Hour Average Value FLOAT 0 % (18-0) R/O: 2.0.0.XXX
AVERAGE Admin; Engineer;
Meas. Tech
Operator; Auditor
RAMP_DURATION Ramp Duration FLOAT 0→60 0 S (17-0) R/W: 2.3.0.XXX
Admin; Engineer;
Meas. Tech;
Operator; Auditor
Object Parameter Listing 319
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.8 AppInfo Parameters
Description: The AppInfo object provides the parameters for viewing information about the applications running in
the device and the ability to start and stop an IEC61131 application runtime.
Number of Instances: 8 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-7: AppInfo Parameters
AppInfo
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX Log Changes
“AppInfo_X” Admin; Engineer;
(where X is Meas. Tech
instance number R/O:
between 1 and 8) Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC40 Instance: R/W: 2.0.0.XXX Log Changes
“Application_X” Admin; Engineer;
(where X is Meas. Tech
instance number R/O:
between 1 and 8) Operator; Auditor
APP_NAME Application Package Name UC40 R/O: 2.0.0.XXX
Admin; Engineer;
320 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
AppInfo
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
Operator; Auditor
CODE_USED Code Space Used by App UINT32 0 Bytes (267-0) R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
CODE_MAX Code Pool Area UINT32 0 Bytes (267-0) R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
DATA_USED Data Space Used by App UINT32 0 Bytes (267-0) R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
DATA_MAX Data Pool Area UINT32 0 Bytes (267-0) R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
OBJ_USED Object Space Used UINT32 0 Bytes (267-0) R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
OBJ_MAX Object Pool Area UINT32 0 Bytes (267-0) R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
RETAIN_USED Retain Space Used UINT32 0 Bytes (267-0) R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
APP_STATUS Application Status ENUM16 09 Unloaded (0) Application R/O: 2.0.0.XXX
0 - Unloaded Status (271) Admin; Engineer;
1 - Load Requested Meas. Tech
2 - Loaded Operator; Auditor
3 - Start Requested
Object Parameter Listing 321
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
AppInfo
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
4 - Running
5 - Stop Requested
6 - Stopped
7 - Terminate Requested
8 - Terminated
9 - Undefined
APP_CODE Application Exception ENUM16 05 None (0) Application R/O: 2.0.0.XXX
0 - None Exception Code Admin; Engineer;
1 - String Error (272) Meas. Tech
2 - Watchdog Exceeded Operator; Auditor
3 - Max CPU Load Exceeded
4 - System Error
5 - End Error
RO_MEM Read Only Memory UINT32 0 Bytes (267-0) R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
RW_MEM Read/Write Memory UINT32 0 Bytes (267-0) R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
STACK_MEM Allocated Stack Memory UINT32 0 Bytes (267-0) R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
RWX_MEM Read/Write and Execute UINT32 0 Bytes (267-0) R/O: 2.0.0.XXX
Memory Admin; Engineer;
Meas. Tech
Operator; Auditor
CPU_USAGE CPU Usage FLOAT 0100 0 % (18-0) R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
PACK_NAME Package Name UC40 R/O: 2.0.0.XXX
Admin; Engineer;
322 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
AppInfo
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
Operator; Auditor
PACK_VER Package Version UC40 R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
APP_CTRL Application Control ENUM16 04 Idle (0) Application R/O: 2.0.0.XXX Log Changes
0 - Idle Control (273) Admin; Engineer;
1 - Start Meas. Tech
2 - Stop Operator; Auditor
3 - Load
4 - Clear
TASK_STATUS Task Status ENUM16 03 Stopped (0) Task Status (274) R/W: 2.0.0.XXX
0 - Stopped Admin; Engineer;
1 - Started Meas. Tech
2 - No License R/O:
3 – Library Version Error Operator; Auditor
PACK_LIB_VER Package Library Version UC20 R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
PACK_STATUS Package Status ENUM16 01 Unloaded (0) Application R/O: 2.0.0.XXX
0 – Unloaded Package Status Admin; Engineer;
1 - Loaded (309) Meas. Tech
Operator; Auditor
NUM_RESTARTS Restart Counter UINT16 R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
RESET COUNTER Reset counter: ENUM16 01 Idle (0) Reset Counter R/W: 2.0.0.XXX Log changes
1 – Idle (311) Admin; Engineer;
2 – Reset Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 323
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.9 Average Parameters
Description: The Average object provides the parameters for configuring which inputs the system uses to calculate
averages and viewing the periodic minimum, maximum, and average values.
Number of Instances: 400 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-8: Average Parameters
Average
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
“Average_X” (where Admin; Engineer; ▪ Legal
X is instance Meas. Tech
number between 1 R/O:
and 400) Operator; Auditor
OBJ_AREA Area Assignment UINT8 0 -> 5 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
SAMPLE_PARAM Input to Average ParamRef Undefined R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
324 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Average
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
SNAPSHOT Value of Input at Last Period DOUBLE 0 R/O: 2.0.0.XXX Legal
End Admin; Engineer;
Meas. Tech
Operator; Auditor
SNAP_TIME Timestamp of Last Period TIME 0 R/O: 2.0.0.XXX Legal
End Admin; Engineer;
Meas. Tech
Operator; Auditor
CUR_PER_AVG Current Hour Average DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PREV_PER_AVG Previous Hour Average DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
CUR_DAY_AVG Current Day Average DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PREV_DAY_AVG Previous Day Average DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
CUR_WK_AVG Current Week Average DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PREV_WK_AVG Previous Week Average DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
Object Parameter Listing 325
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Average
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
CUR_MNTH_AVG Current Month Average DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PREV_MNTH_AVG Previous Month Average DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
CUR_PER_MIN Current Hour Minimum DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PREV_PER_MIN Previous Hour Minimum DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
CUR_DAY_MIN Current Day Minimum DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PREV_DAY_MIN Previous Day Minimum DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
CUR_WK_MIN Current Week Minimum DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PREV_WK_MIN Previous Week Minimum DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
CUR_MNTH_MIN Current Month Minimum DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
326 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Average
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
Operator; Auditor
PREV_MNTH_MIN Previous Month Minimum DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
CUR_PER_MAX Current Hour Maximum DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PREV_PER_MAX Previous Hour Maximum DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
CUR_DAY_MAX Current Day Maximum DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PREV_DAY_MAX Previous Day Maximum DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
CUR_WK_MAX Current Week Maximum DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PREV_WK_MAX Previous Week Maximum DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
CUR_MNTH_MAX Current Month Maximum DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
Object Parameter Listing 327
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Average
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
PREV_MNTH_MAX Previous Month Maximum DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
WEIGHT_OBJ Input to Weight ObjectRef Undefined R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
CUR_BATCH_AVG Current Batch Average DOUBLE 0 R/O: 2.12.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
PREV_BATCH_AVG Previous Batch Average DOUBLE 0 R/O: 2.12.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
328 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.10 Bus Parameters
Description: The Bus object provides the parameters for configuring communication with MIO modules.
Number of Instances: 1 instance may exist.
Storage Location: Saved to internal configuration memory.
Table 5-9: Bus Parameters
Bus
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 1-IO Bus R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 0→5 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC40 1-IO Bus R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
POLL_INTERVAL Interval to Poll I/O ENUM16 0→6 1 second (0) Poll Intervals R/W: 2.0.0.XXX ▪ Log Changes
0 - 1 second (269) Admin; Engineer; ▪ Legal
1 - 500 ms Meas. Tech
2 - 200 ms
Object Parameter Listing 329
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Bus
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
3 - 100 ms R/O:
4 - 50 ms Operator; Auditor
5 - 20 ms
6 - 10 ms
TOS_PULSES TOS pulses sent UINT32 0 R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
CYCLE_PULSES Collection Pulses Sent UINT32 0 R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
READ_OVER_RUNS Overflow of read buffer UINT32 0 R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
READ_UNDER_RUN Read buffer empty UINT32 0 R/O: 2.0.0.XXX
S Admin; Engineer;
Meas. Tech
Operator; Auditor
READ_EMPTY Reads with No Data UINT32 0 R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
READ_DATA Reads with Data from Card UINT32 0 R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
WRITE_OVER_RUNS Overflow of write buffer UINT32 0 R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
WRITE_UNDER_RU Write Buffer empty UINT32 0 R/O: 2.0.0.XXX
NS Admin; Engineer;
330 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Bus
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
Operator; Auditor
WRITE_EMPTY Cycles without Data Writes UINT32 0 R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
WRITE_DATA Writes to I/O Card UINT32 0 R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
RESET_MSG_COUN Reset Message Counters ENUM16 0→1 Disable (0) Enable/Disable R/W: 2.0.0.XXX ▪ Log Changes
T 0 - Disable Selection (30) Admin; Engineer; ▪ Legal
1 - Enable Meas. Tech ▪ Verified
R/O:
Operator; Auditor
Object Parameter Listing 331
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.11 Clock Parameters
Description: The Clock object provides the parameters for viewing information on, and configuring, the clock and
daylight savings time.
Number of Instances: 1 instance may exist.
Storage Location: Saved to internal configuration memory.
Table 5-10: Clock Parameters
Clock
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Clock R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer ▪ Legal
R/O:
Meas. Tech;
Operator; Auditor
OBJ_AREA Area Assignment UINT8 0→5 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer
1 - In Alarm Meas. Tech;
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
TIME Current Time TIME 0 R/O: 2.0.0.XXX Legal
Admin; Engineer
Meas. Tech;
Operator; Auditor
YEAR Current Year UINT16 0 R/O: 2.0.0.XXX Legal
Admin; Engineer
Meas. Tech;
Operator; Auditor
332 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Clock
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
MONTH Current Month ENUM16 Months of the R/O: 2.0.0.XXX Legal
1 - January Year (236) Admin; Engineer
2 - February Meas. Tech;
3 - March Operator; Auditor
4 - April
5 - May
6 - June
7 - July
8 - August
9 - September
10 - October
11 - November
12 - December
DAY Current Day UINT8 0 R/O: 2.0.0.XXX Legal
Admin; Engineer
Meas. Tech;
Operator; Auditor
HOUR Current Hour UINT8 0 R/O: 2.0.0.XXX Legal
Admin; Engineer
Meas. Tech;
Operator; Auditor
SECOND Current Second UINT8 0 R/O: 2.0.0.XXX Legal
Admin; Engineer
Meas. Tech;
Operator; Auditor
MINUTE Current Minute UINT8 0 R/O: 2.0.0.XXX Legal
Admin; Engineer
Meas. Tech;
Operator; Auditor
WEEK_DY Current Day of the Week ENUM16 Sunday (0) Day of Week R/O: 2.0.0.XXX Legal
0 - Sunday (34) Admin; Engineer
1 - Monday Meas. Tech;
2 - Tuesday Operator; Auditor
3 - Wednesday
4 - Thursday
Object Parameter Listing 333
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Clock
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
5 - Friday
6 - Saturday
DST_MODE Auto Daylight Saving Time ENUM16 0→1 Disable (0) Enable/Disable R/W: 2.0.0.XXX ▪ Log Changes
Mode Selection (30) Admin; Engineer ▪ Legal
0 - Disable R/O:
1 - Enable Meas. Tech;
Operator; Auditor
DST_STATUS Daylight Saving Time Status ENUM16 Standard Time (0) Daylight R/O: 2.0.0.XXX Legal
0 - Standard Time Saving Time Admin; Engineer
1 - Saving Time Status (194) Meas. Tech;
2 - Gift Time Operator; Auditor
DST_ST_HR DST Start Hour UINT8 0→23 2 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer ▪ Legal
R/O:
Meas. Tech;
Operator; Auditor
DST_ST_DW DST Start Day of Week ENUM16 0→6 Sunday (0) Day of Week R/W: 2.0.0.XXX ▪ Log Changes
0 - Sunday (34) Admin; Engineer ▪ Legal
1 - Monday R/O:
2 - Tuesday Meas. Tech;
3 - Wednesday Operator; Auditor
4 - Thursday
5 - Friday
6 - Saturday
DST_ST_OCR DST Start Occurrence in ENUM16 0→ 4 Second Week (1) Week of R/W: ▪ Log Changes
Month Month (151) Admin; Engineer ▪ Legal
0 - First Week R/O:
1 - Second Week Meas. Tech;
2 - Third Week Operator; Auditor
3 - Fourth Week
4 - Last Week
DST_ST_MTH DST Start Month ENUM16 1→12 March (3) Months of the R/W: 2.0.0.XXX ▪ Log Changes
1 - January Year (236) Admin; Engineer ▪ Legal
2 - February R/O:
3 - March
334 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Clock
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
4 - April Meas. Tech;
5 - May Operator; Auditor
6 - June
7 - July
8 - August
9 - September
10 - October
11 - November
12 - December
DST_ST_TM DST Start Date / Time TIME 0 R/O: 2.0.0.XXX Legal
Admin; Engineer
Meas. Tech;
Operator; Auditor
DST_EN_HR DST End Hour UINT8 0→23 2 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer ▪ Legal
R/O:
Meas. Tech;
Operator; Auditor
DST_EN_DW DST End Day of Week ENUM16 0→6 Sunday (0) Day of Week R/W: 2.0.0.XXX ▪ Log Changes
0 - Sunday (34) Admin; Engineer ▪ Legal
1 - Monday R/O:
2 - Tuesday Meas. Tech;
3 - Wednesday Operator; Auditor
4 - Thursday
5 - Friday
6 - Saturday
DST_EN_OCR DST Occurrence in Month ENUM16 0→4 First Week (0) Week of R/W: 2.0.0.XXX ▪ Log Changes
0 - First Week Month (151) Admin; Engineer ▪ Legal
1 - Second Week R/O:
2 - Third Week Meas. Tech;
3 - Fourth Week Operator; Auditor
4 - Last Week
Object Parameter Listing 335
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Clock
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
DST_EN_MTH DST End Month ENUM16 1→12 November (11) Months of the R/W: 2.0.0.XXX ▪ Log Changes
1 - January Year (236) Admin; Engineer ▪ Legal
2 - February R/O:
3 - March Meas. Tech;
4 - April Operator; Auditor
5 - May
6 - June
7 - July
8 - August
9 - September
10 - October
11 - November
12 - December
DST_EN_TM DST End Date / Time Time Undefined R/O: 2.0.0.XXX Legal
Admin; Engineer
Meas. Tech;
Operator; Auditor
TIME_SYNC_ Time Synchronization UINT16 0→30 2 Seconds R/W: 2.3.0.XXX ▪ Log Changes
DEADBAND Deadband (310-0) Admin; Engineer ▪ Legal
R/O:
Meas. Tech;
Operator; Auditor
FLOAT_DATE_TIME_ Enabled for date/time events ENUM16 0→1 1 Enable/Disable R/W: 2.3.0.XXX ▪ Log Changes
EN as a float Selection (30) Admin; Engineer ▪ Legal
R/O:
Meas. Tech;
Operator; Auditor
FLOAT_DATE Floating Point Date FLOAT 0 R/O: 2.3.0.XXX Legal
Admin; Engineer
Meas. Tech;
Operator; Auditor
FLOAT_TIME Floating Point Time FLOAT 0 R/O: 2.3.0.XXX Legal
Admin; Engineer
Meas. Tech;
Operator; Auditor
336 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Object Parameter Listing 337
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.12 Comm Parameters
Description: The Comm object provides the parameters for configuring the communications ports.
Number of Instances: 35 instances may exist (varies with the Serial Module).
Storage Location: Saved to internal configuration memory.
Table 5-11: Comm Parameters
Comm
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX Log Changes
1-COM1 Admin; Engineer;
2-COM2 Meas. Tech
3-COM3 R/O:
4-COM4 Operator; Auditor
5-ENET1
6-ENET2
7-USB
8-35-COMX (X –
varies by instance)
OBJ_AREA Area Assignment UINT8 0→5 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer
1 - In Alarm Meas. Tech;
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
338 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Comm
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
PORT_DESC Port Description UC20 ▪ Instance: R/W: 2.0.0.XXX Log Changes
1-Serial Port 1 Admin; Engineer;
2-Serial Port 2 Meas. Tech
3-Serial Port 3 R/O:
4-Serial Port 4 Operator; Auditor
5-Ethernet
Port 1
6-Ethernet
Port 2
7-USB Port
8-35-Serial
Port X (X
varies by
instance)
PORT_ENABLE Port Enable ENUM16 0→1 Enable (1) Enable/Disable R/W: 2.0.0.XXX Log Changes
0 - Disable Selection (30) Admin; Engineer;
1 - Enable Meas. Tech
R/O:
Operator; Auditor
OWNER Port Owner ENUM16 Instance Instance: Instance: R/W: 2.0.0.XXX Log Changes
1 - DNP3/Modbus Slave : 1-7: DNP3 (2) 1 -2: Serial Port Admin; Engineer;
2 - DNP3 1 - 1→4 Owner (291) Meas. Tech
3 - Modbus Slave 2 - 1→ 4 3 -4: Serial Port R/O:
4 - Modbus Master 3 - 1→7 Owner (292) Operator; Auditor
5 – RESERVED 4 - 1→7 5 -6: Serial Port
6 – RESERVED 5 - 1→4 Owner (291)
7 – MVS4088B 6 - 1→4 7 - Serial Port
7 - 2→2 Owner (300)
8-35 – Serial
Port Owner
(400)
Object Parameter Listing 339
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Comm
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
PORT_TYPE Port Type ENUM16 0→3 Instance: Port Type (68) R/O: 2.0.0.XXX
0 - Serial 1 - Serial (0) Admin; Engineer
1 - Ethernet 2 - Serial (0) Meas. Tech;
2 - WiFi 3 - Serial (0) Operator; Auditor
3 - USB 4 - Serial (0)
5 - Ethernet (1)
6 - Ethernet (1)
7 - USB (3)
8-35 – Serial (0)
SER_MODE Serial Mode ENUM16 Instance RS-232 (0) Instance: R/W: 2.0.0.XXX Log Changes
0 - RS-232 : 1- Serial Port Admin; Engineer;
1 - RS-485 2-Wire (No 1 - 0→4 Mode (69) Meas. Tech
Termination) 2 - 0→2 2 - Serial Port R/O:
2 - RS-485 2-Wire 3 - 0→2 Mode (214) Operator; Auditor
(Terminated) 4 - 1→4 3 - Serial Port
3 - RS-422 4-Wire (No 5 - 4→4 Mode (214)
Termination) 6 - 4→4 4 -7: Serial Port
4 - RS-422 4-Wire 7 - 0→0 Mode (69)
(Terminated) 8-35 – Serial
Port Mode (69)
BAUD Baud Rate ENUM16 0→7 115.2K (7) Baud Rate (39) R/W: 2.0.0.XXX Log Changes
0 - 1200 Admin; Engineer;
1 - 2400 Meas. Tech
2 - 4800 R/O:
3 - 9600 Operator; Auditor
4 - 19.2K
5 - 38.4K
6 - 57.6K
7 - 115.2K
SER_SETTING Serial Settings ENUM16 0→4 8 data bits | no Serial Settings R/W: 2.0.0.XXX Log Changes
0 - 7 data bits | odd parity | parity | 1 stop bit (40) Admin; Engineer;
1 stop bit (2) Meas. Tech
1 - 7 data bits | even parity | R/O:
1 stop bit Operator; Auditor
2 - 8 data bits | no parity | 1
340 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Comm
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
stop bit
3 - 8 data bits | odd parity |
1 stop bit
4 - 8 data bits | even parity |
1 stop bit
IPV4_ADDRESS IPv4 IP Address ByteArray4 Instance: IPv4 Address R/W: 2.0.0.XXX Log Changes
1-5: -0xC0A8010A (41) Admin; Engineer;
6-0XC0A8020A Meas. Tech
7-0XC0A8010A R/O:
Operator; Auditor
MAC48_ADDRESS MAC 48-bit Address ByteArray6 0x000000 48-bit MAC R/O: 2.0.0.XXX
Address (42) Admin; Engineer;
Meas. Tech
Operator; Auditor
MAX_CONNECT Maximum Number of UINT8 Instance: R/O: 2.0.0.XXX
Connections 1-1 Admin; Engineer;
2-1 Meas. Tech
3-1 Operator; Auditor
4-1
5-206
6-206
7-1
CUR_CONNECT Current Number of UINT8 0 R/O: 2.0.0.XXX
Connections Admin; Engineer;
Meas. Tech
Operator; Auditor
SSID WiFi SSID UC30 FBXX00 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SECURE_TYPE Wireless Security Type ENUM16 0→1 WPA-2 (1) WiFi Security R/W: 2.0.0.XXX
0 - Open Option (95) Admin; Engineer;
1 - WPA-2 Meas. Tech
Object Parameter Listing 341
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Comm
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
KEY Wireless Security Key UC40 EmersonFBXX00 Password (241- R/W: 2.0.0.XXX Log Changes
1) Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
WIFI_CHANNEL Wireless Channel UINT8 1→11 1 R/W: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
IPV4_GATEWAY_ Gateway Address (IPv4) ByteArray4 Instance: IPv4 Address R/W: 2.0.0.XXX Log Changes
ADDR 1: 0xC0A80101 (41) Admin; Engineer;
2: 0xC0A80101 Meas. Tech
3: 0xC0A80101 R/O:
4: 0xC0A80101 Operator; Auditor
5: 0xC0A80101
6: 0xC0A80201
7: 0xC0A80101
IPV4_SUBNET_MAS Subnet Mask (IPv4) ByteArray4 Instance: IPv4 Address R/W: 2.0.0.XXX Log Changes
K 1-5: 0xFFFFFF00 (41) Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
WIFI_ANTENNA WiFi Antenna Type ENUM16 0→1 Internal Antenna WiFi Antenna R/W: 2.0.0.XXX
0 - Internal Antenna (0) Type (226) Admin; Engineer;
1 - External Antenna Meas. Tech
R/O:
Operator; Auditor
IP_CONN1_OWNER IP Connection 1 Owner ENUM16 0→1 DNP3 Protocol (0) IP Connection R/W: 2.0.0.XXX Log Changes
0 - DNP3 Protocol Owner (290) Admin; Engineer;
1 - Modbus Slave Protocol Meas. Tech
R/O:
Operator; Auditor
342 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Comm
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
IP_CONN2_OWNER IP Connection 2 Owner ENUM16 0→1 DNP3 Protocol (0) IP Connection R/W: 2.0.0.XXX Log Changes
0 - DNP3 Protocol Owner (290) Admin; Engineer;
1 - Modbus Slave Protocol Meas. Tech
R/O:
Operator; Auditor
IP_CONN3_OWNER IP Connection 3 Owner ENUM16 0→1 DNP3 Protocol (0) IP Connection R/W: 2.0.0.XXX Log Changes
0 - DNP3 Protocol Owner (290) Admin; Engineer;
1 - Modbus Slave Protocol Meas. Tech
R/O:
Operator; Auditor
IP_CONN4_OWNER IP Connection 4 Owner ENUM16 0→1 DNP3 Protocol (0) IP Connection R/W: 2.0.0.XXX Log Changes
0 - DNP3 Protocol Owner (290) Admin; Engineer;
1 - Modbus Slave Protocol Meas. Tech
R/O:
Operator; Auditor
IP_CONN5_OWNER IP Connection 5 Owner ENUM16 0→1 DNP3 Protocol (0) IP Connection R/W: 2.0.0.XXX Log Changes
0 - DNP3 Protocol Owner (290) Admin; Engineer;
1 - Modbus Slave Protocol Meas. Tech
R/O:
Operator; Auditor
IP_CONN6_OWNER IP Connection 6 Owner ENUM16 0→1 Modbus Slave IP Connection R/W: 2.0.0.XXX Log Changes
0 - DNP3 Protocol Protocol (1) Owner (290) Admin; Engineer;
1 - Modbus Slave Protocol Meas. Tech
R/O:
Operator; Auditor
IP_CONN7_OWNER IP Connection 7 Owner ENUM16 0→0 Modbus Master IP Connection R/O: 2.0.0.XXX Log Changes
0 - Modbus Master Protocol Protocol (0) 7 Owner (260) Admin; Engineer;
Meas. Tech
Operator; Auditor
KEY_ON_DELAY Key On Delay FLOAT 0→3 0 s (17-0) R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 343
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Comm
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
KEY_OFF_DELAY Key Off Delay FLOAT 0→3 0 s (17-0) R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DNP3_ACTIVE_ DNP3 Active Connections UINT8 0 → 20 0 R/O: 2.5.0.XXX Log Changes
CONN Admin; Engineer;
Meas. Tech;
Operator; Auditor
DNP3_RESERVED DNP3 Reserved UINT8 0 → 20 2 R/W: 2.5.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
MBUS_ACTIVE_ Modbus Active Connections UINT8 0 → 20 0 R/O: 2.5.0.XXX Log Changes
CONN Admin; Engineer;
Meas. Tech;
Operator; Auditor
MBUS_SLAVE_ Modbus Slave Reserved UINT8 0 → 20 2 R/W: 2.5.0.XXX Log Changes
RESERVED Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
MBUS_MASTER_ Modbus Master Reserved UINT8 0→1 1 R/O: 2.5.0.XXX Log Changes
RESERVED Admin; Engineer;
Meas. Tech;
Operator; Auditor
344 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.13 Components Parameters
Description: The Components object provides the parameters for configuring fluid components.
Number of Instances: 36 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-12: Components Parameters
Components
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
“Components_X” Admin; Engineer; ▪ Legal
(where X is instance Meas. Tech
number between 1 R/O:
and 36) Operator; Auditor
OBJ_AREA Area Assignment UINT8 0→5 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
USER_MODE Operation Mode ENUM16 0→3 Override (1) User Mode R/W: 2.0.0.XXX ▪ Log Changes
0 - Measured Selection 4 Admin; Engineer; ▪ Legal
1 - Override (188) Meas. Tech
3 - Remote Download
Object Parameter Listing 345
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Components
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
FAULT_MODE Fault Mode ENUM16 0→2 Fault (1) Fault Selection R/W: 2.0.0.XXX ▪ Log Changes
0 - Live (32) Admin; Engineer; ▪ Legal
1 - Fault Meas. Tech
2 - Last Good R/O:
Operator; Auditor
ANALYSIS_TIMEOU Analysis Timeout Enable ENUM16 0→1 Disable (0) Enable/Disable R/W: 2.0.0.XXX ▪ Log Changes
T_ENB 0 - Disable Selection (30) Admin; Engineer; ▪ Legal
1 - Enable Meas. Tech
R/O:
Operator; Auditor
ANALYSIS_TIMEOU Analysis Timeout Value FLOAT 0→ 900 s (17-0) R/W: 2.0.0.XXX ▪ Log Changes
T 4000000 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
LIVE_ANALYSIS_TIM Last Good Analysis Time Time 0 R/O: 2.0.0.XXX Legal
E Admin; Engineer;
Meas. Tech
Operator; Auditor
NORMALIZATION_ Normalization Option ENUM16 0→2 Full Normalization Normalization R/W: 2.0.0.XXX ▪ Log Changes
OPT 0 - None (1) Type (67) Admin; Engineer; ▪ Legal
1 - Full Normalization Meas. Tech
2 - Methane Adjust R/O:
Operator; Auditor
COMPONENTS_AL Components Alarm BIN32 Normal Components R/O: 2.0.0.XXX Legal
M 0 - Normal Alarm (190) Admin; Engineer;
1 - Analysis Timeout Meas. Tech
2 - Normalization Failure Operator; Auditor
APPLY_COMP Apply Composition Values ENUM16 0→1 No Action (0) Live Trigger R/W: 2.0.0.XXX ▪ Log Changes
0 - No Action (82) Admin; Engineer; ▪ Legal
1 - Accept Composition Meas. Tech
R/O:
Operator; Auditor
346 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Components
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
GC_DATA_OBJ GC Data Object ObjectRef GC Instance: R/W: 2.0.0.XXX ▪ Log Changes
Data “GC Data_1-X” Admin; Engineer; ▪ Legal
(where X is instance Meas. Tech
number between 1 R/O:
and-24) Operator; Auditor
C1_LIVE Live Methane DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
N2_LIVE Live Nitrogen DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
CO2_LIVE Live Carbon Dioxide DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
C2_LIVE Live Ethane DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
C3_LIVE Live Propane DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
H2O_LIVE Live Water DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
H2S_LIVE Live Hydrogen Sulfide DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
H2_LIVE Live Hydrogen DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Object Parameter Listing 347
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Components
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
Operator; Auditor
CO_LIVE Live Carbon Monoxide DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
O2_LIVE Live Oxygen DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
IC4_LIVE Live i-Butane DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
NC4_LIVE Live n-Butane DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
IC5_LIVE Live i-Pentane DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
NC5_LIVE Live n-Pentane DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
C6_LIVE Live n-Hexane DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
C7_LIVE Live n-Heptane DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
348 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Components
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
C8_LIVE Live n-Octane DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
C9_LIVE Live n-Nonane DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
C10_LIVE Live n-Decane DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
HE_LIVE Live Helium DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
AR_LIVE Live Argon DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
NEOC5_LIVE Live Neopentane DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
BENZENE_LIVE Live Benzene DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
TOLUENE_LIVE Live Toluene DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
C1_OVRD Override Methane DOUBLE 0→100 100 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Object Parameter Listing 349
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Components
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
N2_OVRD Override Nitrogen DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
CO2_OVRD Override Carbon Dioxide DOUBLE 0 100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C2_OVRD Override Ethane DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C3_OVRD Override Propane DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
H2O_OVRD Override Water DOUBLE 0 100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
H2S_OVRD Override Hydrogen Sulfide DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
H2_OVRD Override Hydrogen DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
350 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Components
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
CO_OVRD Override Carbon Monoxide DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
O2_OVRD Override Oxygen DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
IC4_OVRD Override i-Butane DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
NC4_OVRD Override n-Butane DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
IC5_OVRD Override i-Pentane DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
NC5_OVRD Override n-Pentane DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C6_OVRD Override n-Hexane DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Object Parameter Listing 351
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Components
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
C7_OVRD Override n-Heptane DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C8_OVRD Override n-Octane DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C9_OVRD Override n-Nonane DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C10_OVRD Override n-Decane DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
HE_OVRD Override Helium DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
AR_OVRD Override Argon DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
NEOC5_OVRD Override Neopentane DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
352 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Components
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
BENZENE_OVRD Override Benzene DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
TOLUENE_OVRD Override Toluene DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C1_SEL Selected Methane DOUBLE 0→100 100 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
N2_SEL Selected Nitrogen DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
CO2_SEL Selected Carbon Dioxide DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
C2_SEL Selected Ethane DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
C3_SEL Selected Propane DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
Object Parameter Listing 353
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Components
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
H2O_SEL Selected Water DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
H2S_SEL Selected Hydrogen Sulfide DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
H2_SEL Selected Hydrogen DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
CO_SEL Selected Carbon Monoxide DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
O2_SEL Selected Oxygen DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
IC4_SEL Selected i-Butane DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
NC4_SEL Selected n-Butane DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
IC5_SEL Selected i-Pentane DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX ▪ Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
NC5_SEL Selected n-Pentane DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
354 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Components
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
Operator; Auditor
C6_SEL Selected n-Hexane DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
C7_SEL Selected n-Heptane DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
C8_SEL Selected n-Octane DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
C9_SEL Selected n-Nonane DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
C10_SEL Selected n-Decane DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
HE_SEL Selected Helium DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
AR_SEL Selected Argon DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
NEOC5_SEL Selected Neopentane DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
Object Parameter Listing 355
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Components
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
BENZENE_SEL Selected Benzene DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
TOLUENE_SEL Selected Toluene DOUBLE 0→100 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
C1_FAULT Fault Methane DOUBLE 0→100 100 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
N2_FAULT Fault Nitrogen DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
CO2_FAULT Fault Carbon Dioxide DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C2_FAULT Fault Ethane DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C3_FAULT Fault Propane DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
H2O_FAULT Fault Water DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
356 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Components
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
R/O:
Operator; Auditor
H2S_FAULT Fault Hydrogen Sulfide DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
H2_FAULT Fault Hydrogen DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
CO_FAULT Fault CO DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
O2_FAULT Fault Oxygen DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
IC4_FAULT Fault i-Butane DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
NC4_FAULT Fault n-Butane DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
IC5_FAULT Fault i-Pentane DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Object Parameter Listing 357
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Components
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
R/O:
Operator; Auditor
NC5_FAULT Fault n-Pentane DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C6_FAULT Fault n-Hexane DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C7_FAULT Fault n-Heptane DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C8_FAULT Fault n-Octane DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C9_FAULT Fault n-Nonane DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C10_FAULT Fault n-Decane DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
HE_FAULT Fault Helium DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
358 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Components
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
R/O:
Operator; Auditor
AR_FAULT Fault Argon DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
NEOC5_FAULT Fault Neopentane DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
BENZENE_FAULT Fault Benzene DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
TOLUENE_FAULT Fault Toluene DOUBLE 0→100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
TOTAL_SEL Total Selected DOUBLE 0 % (18-0) R/O: 2.12.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
TOTAL_LIVE Total Live DOUBLE 0 % (18-0) R/O: 2.12.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
TOTAL_OVRD Total Override DOUBLE 0 % (18-0) R/O: 2.12.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
Object Parameter Listing 359
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Components
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
TOTAL_FAULT Total Fault DOUBLE 0 % (18-0) R/O: 2.12.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
360 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.14 Ctrl Setup Parameters
Description: The Ctrl Setup object provides the parameters for configuring the number of instances for control
objects, such as Action Blks (Blocks), Effects, Math Blks (Blocks), and PIDs.
Number of Instances: 1 instance may exist.
Storage Location: Saved to internal configuration memory.
Table 5-13: Ctrl Setup Parameters
Ctrl Setup
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Ctrl Setup_1 R/W: 2.3.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.3.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status: BIN32 Normal Object Status R/O: 2.3.0.XXX
0 – Normal (80) Admin; Engineer;
1 –In Alarm Meas. Tech;
2 – Failure Operator; Auditor
3 – Override
4 – Inactive
DESC Description UC40 Control Setup R/W: 2.3.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 361
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Ctrl Setup
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
NUM_CONTROL Number of Controls UINT16 0 R/W: 2.3.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
MAX_CONTROL Maximum Controls UINT16 100 R/O: 2.3.0.XXX
Admin; Engineer;
Meas. Tech;
Operator; Auditor
NUM_ACT_BLK Number of Action Blocks UINT16 0 100 48 R/W: 2.3.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
MAX_ACT_BLK Maximum Action Blocks UINT16 100 R/O: 2.3.0.XXX
Admin; Engineer;
Meas. Tech;
Operator; Auditor
NUM_MATH_BLK Number of Math Blocks UINT16 0 100 12 R/W: 2.3.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
MAX_MATH_BLK Maximum Math Blocks UINT16 100 R/O: 2.3.0.XXX
Admin; Engineer;
Meas. Tech;
Operator; Auditor
NUM_EFFECT Number of Effects UINT16 0 100 16 R/W: 2.3.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
MAX_EFFECT Maximum Effects UINT16 100 R/O: 2.3.0.XXX
Admin; Engineer;
362 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Ctrl Setup
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech;
Operator; Auditor
NUM_PID Number of PIDs UINT16 0 100 24 R/W: 2.3.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
MAX_PID Maximum PIDs UINT16 100 R/O: 2.3.0.XXX
Admin; Engineer;
Meas. Tech;
Operator; Auditor
BUSY_STATUS Busy Status ENUM16 01 Idle (0) Busy Status R/O: 2.3.0.XXX
0 - Idle (287) Admin; Engineer;
1 - Busy Meas. Tech;
Operator; Auditor
LICENSE_CTRL License Control ENUM16 01 Licensed (0) License Ctrl R/O: 2.5.0.XXX
0 - Licensed (352) Admin; Engineer;
1 - Unlicensed Meas. Tech;
Operator; Auditor
Object Parameter Listing 363
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.15 DI Parameters
Description: The DI object provides the parameters for configuring digital inputs.
Number of Instances: 248 instances may exist (8 per MIO module).
Storage Location: Saved to internal configuration memory.
Table 5-14: DI Parameters
DI
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Varies by instance R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
MOD_LOC Module Location UINT8 Varies by instance R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
CHANNEL Channel UINT8 Varies by instance R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
364 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DI
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
DESC Description UC20 Varies by instance R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
ZERO_DESC Description of Off State UC10 OFF R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
ONE_DESC Description of On State UC10 ON R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
USER_MODE Operation Mode ENUM16 01 Live (0) User Selection R/W: 2.0.0.XXX Log Changes
0 - Live (31) Admin; Engineer;
1 - Override Meas. Tech
R/O:
Operator; Auditor
FAULT_MODE Fault Mode ENUM16 01 Fault (0) IO Fault R/W: 2.0.0.XXX Log Changes
0 - Fault Selection (136) Admin; Engineer;
1 - Last Good Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 365
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DI
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
ACTUAL_MODE Actual Mode ENUM16 Live (0) Actual Mode R/O: 2.0.0.XXX
0 - Live (125) Admin; Engineer;
1 - Auto Meas. Tech
2 - Auto Read Operator; Auditor
3 - Override
4 - Calibration
5 - Fault
6 - Last Good
7 - Last Hour Average
8 – Ramp to Fault Value
9 – Ramp to Last Hour Avg
DI_TYPE Digital Input Type ENUM16 01 Normal (0) DI Type (132) R/W: 2.0.0.XXX Log Changes
0 - Normal Admin; Engineer;
1 - Latched Meas. Tech
R/O:
Operator; Auditor
INVERT Digital Input Inversion Mode ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX Log Changes
0 - Disable Selection (30) Admin; Engineer;
1 - Enable Meas. Tech
R/O:
Operator; Auditor
FILTER_TIME Digital Input Filter Time FLOAT 0 300 0 s (17-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Verified
Meas. Tech
R/O:
Operator; Auditor
LOGIC_LEVEL Logic Level ENUM16 01 66 microamps (0) Logic Level R/W: Log Changes
0 - 66 microamps (133) Admin; Engineer;
1 - 2 milliamps Meas. Tech
R/O:
Operator; Auditor
LIVE Live Value ENUM16 01 Off (0) Digital Status R/O: 2.0.0.XXX
0 - Off (134) Admin; Engineer;
1 - On Meas. Tech
Operator; Auditor
366 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DI
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
SELECTED Selected Value ENUM16 Off (0) Digital Status R/O: 2.0.0.XXX
0 - Off (134) Admin; Engineer;
1 - On Meas. Tech
Operator; Auditor
OVRD Override Value ENUM16 01 Off (0) Digital Status R/W: 2.0.0.XXX Log Changes
0 - Off (134) Admin; Engineer;
1 - On Meas. Tech
R/O:
Operator; Auditor
FAULT Fault Value ENUM16 01 Off (0) Digital Status R/W: 2.0.0.XXX Log Changes
0 - Off (134) Admin; Engineer;
1 - On Meas. Tech
R/O:
Operator; Auditor
LAST_GOOD Last Good Value ENUM16 Off (0) Digital Status R/O: 2.0.0.XXX
0 - Off (134) Admin; Engineer;
1 - On Meas. Tech
Operator; Auditor
ALARM_MODE Digital Status Alarm Mode ENUM16 01 Off (0) Digital Status R/W: 2.0.0.XXX Log Changes
0 - Off (134) Admin; Engineer;
1 - On Meas. Tech
R/O:
Operator; Auditor
OFF_ON_COUNT Digital Input Off-On UINT32 0 R/W: 2.0.0.XXX
Transition Count Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
ACCUM_ONTIME DI Accumulated On Time FLOAT 0 R/W: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
ACCUM_OFFTIME DI Accumulated Off Time FLOAT 0 R/W: 2.0.0.XXX
Admin; Engineer;
Object Parameter Listing 367
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DI
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
R/O:
Operator; Auditor
INPUT_STATUS Input Health Status BIN16 Normal FB3000 DI R/O: 2.0.0.XXX
0 - Normal Status (304) Admin; Engineer;
1 - Not Licensed Meas. Tech
2 - Instance Inactive Operator; Auditor
3 - Comm Fail
4 - Override Active
5 - In Alarm
6 - Point Fail
7 - Termination Missing
8 - Status Alarm
9 - Hardware Fail
RESET_LATCH Reset Latch ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX
0 - Disable Selection (30) Admin; Engineer;
1 - Enable Meas. Tech
R/O:
Operator; Auditor
RESISTOR_TYPE Pull up or Pull down Resistor ENUM16 01 Pull Up (0) DI/PI Resistor R/W: 2.0.0.XXX Log Changes
type Selection (276) Admin; Engineer;
0 - Pull Up Meas. Tech
1 - Pull Down R/O:
Operator; Auditor
368 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.16 DispChart Parameters
Description: The DispChart object provides the parameters for display chart.
Number of Instances: 24 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-15: DispChart Parameters
DispChart
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Default R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.17.0.XXX Log Changes
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 Default R/W: 2.17.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
CHART_PRM_REF Chart Parameter PRMREF R/W: 2.17.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Object Parameter Listing 369
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DispChart
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
AUTO_SCALE Auto Scale ENUM16 0 - >1 Enable/Disable R/W: 2.17.0.XXX ▪ Log Changes
Selection (30) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
URL Upper Range Limit FLOAT 100 R/W: 2.17.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
LRL Lower Range Limit FLOAT 0 R/W: 2.17.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
370 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.17 DispList Parameters
Description: The DispList object provides the parameters for display list.
Number of Instances: 24 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-16: DispList Parameters
DispList
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Default R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.17.0.XXX Log Changes
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
SS_PRM_DESC_1 Item 1 User Description UC10 R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SS_PRM_REF_1 Item 1 Parameter PRMREF R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
Object Parameter Listing 371
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DispList
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
SS_PRM_DESC_2 Item 2 User Description UC10 R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SS_PRM_REF_2 Item 2 Parameter PRMREF R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SS_PRM_DESC_3 Item 3 User Description UC10 R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SS_PRM_REF_3 Item 3 Parameter PRMREF R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SS_PRM_DESC_4 Item 4 User Description UC10 R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SS_PRM_REF_4 Item 4 Parameter PRMREF R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SS_PRM_DESC_5 Item 5 User Description UC10 R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
372 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DispList
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
SS_PRM_REF_5 Item 5 Parameter PRMREF R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SS_PRM_DESC_6 Item 6 User Description UC10 R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SS_PRM_REF_6 Item 6 Parameter PRMREF R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SS_PRM_DESC_7 Item 7 User Description UC10 R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SS_PRM_REF_7 Item 7 Parameter PRMREF R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SS_PRM_DESC_8 Item 8 User Description UC10 R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SS_PRM_REF_8 Item 8 Parameter PRMREF R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
Object Parameter Listing 373
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DispList
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
SS_PRM_DESC_9 Item 9 User Description UC10 R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SS_PRM_REF_9 Item 9 Parameter PRMREF R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SS_PRM_DESC_10 Item 10 User Description UC10 R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SS_PRM_REF_10 Item 10 Parameter PRMREF R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SS_PRM_DESC_11 Item 11 User Description UC10 R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SS_PRM_REF_11 Item 11 Parameter PRMREF R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SS_PRM_DESC_12 Item 12 User Description UC10 R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
374 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DispList
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
SS_PRM_REF_12 Item 12 Parameter PRMREF R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SS_PRM_DESC_13 Item 13 User Description UC10 R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SS_PRM_REF_13 Item 13 Parameter PRMREF R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SS_PRM_DESC_14 Item 14 User Description UC10 R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SS_PRM_REF_14 Item 14 Parameter PRMREF R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SS_PRM_DESC_15 Item 15 User Description UC10 R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SS_PRM_REF_15 Item 15 Parameter PRMREF R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
Object Parameter Listing 375
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DispList
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
SS_PRM_DESC_16 Item 16 User Description UC10 R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SS_PRM_REF_16 Item 16 Parameter PRMREF R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SCROLL_TIME User List Scroll Time UINT8 1 -> 255 4 R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
376 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.18 DNP3 Parameters
Description: The DNP3 object provides the parameters for configuring DNP3 communications on a specific port.
Number of Instances: 7 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-17: DNP3 Parameters
DNP3
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 DNP3 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
LOGIN_TMOUT Inactivity Timeout UINT16 30 120 s (17-0) R/W: 2.0.0.XXX Log Changes
1440 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
UNSOLICIT_MODE Unsolicited Message Option ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX Log Changes
0 - Disable Selection (30) Admin; Engineer;
1 - Enable Meas. Tech
Object Parameter Listing 377
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DNP3
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
DNP_TCP_ENABLE Enable TCP for DNP3 ENUM16 01 Instance: Enable/Disable R/W: 2.0.0.XXX Log Changes
0 - Disable 1-4 & 7: Disable (0) Selection (30) Admin; Engineer;
1 - Enable 5-6: Enable (1) Meas. Tech
R/O:
Operator; Auditor
TCPIP_PORT TCP/IP Port UINT16 20000 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
ADDRESS RTU Address UINT16 0 1 R/W: 2.0.0.XXX Log Changes
65519 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
BIN_IN_SCAN_PRD Binary Input Scan Period UINT32 0 60 0 s (17-0) R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
ANLG_IN_SCAN_ Analog Input Scan Period UINT32 0 60 0 s (17-0) R/W: 2.0.0.XXX Log Changes
PRD Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
BIN_CNTR_SCAN_ Binary Counter Scan Period UINT32 0 60 0 s (17-0) R/W: 2.0.0.XXX Log Changes
PRD Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
378 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DNP3
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
CONFIRM_TIMEOU Master Confirmation UINT32 1000 10000 R/W: 2.0.0.XXX Log Changes
T Timeout 20000 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
UNSOL_CFM_ Unsolicited Confirmation UINT32 1000 10000 R/W: 2.0.0.XXX Log Changes
TIMEOUT Timeout 20000 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
UNSOL_NUM_ Unsolicited Number of UINT16 1 3 R/W: 2.0.0.XXX Log Changes
RETRIES retries 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
UNSOL_RETRY_ Delay between unsolicited UINT32 1 30000 R/W: 2.0.0.XXX Log Changes
DELAY retries 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
UNSOL_CLASS1 Class 1 Unsolicited Msg ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX Log Changes
enable Selection (30) Admin; Engineer;
0 - Disable Meas. Tech
1 - Enable R/O:
Operator; Auditor
UNSOL_CLASS2 Class 2 Unsolicited Msg ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX Log Changes
enable Selection (30) Admin; Engineer;
0 - Disable Meas. Tech
1 - Enable R/O:
Operator; Auditor
UNSOL_CLASS3 Class 3 Unsolicited Msg ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX Log Changes
enable Selection (30) Admin; Engineer;
0 - Disable Meas. Tech
1 - Enable R/O:
Operator; Auditor
Object Parameter Listing 379
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DNP3
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
UNSOL_CLASS1_ Class 1 Unsolicited Max UINT8 0 255 5 R/W: 2.0.0.XXX Log Changes
MAX Events Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
UNSOL_CLASS2_ Class 2 Unsolicited Max UINT8 0 255 5 R/W: 2.0.0.XXX Log Changes
MAX Events Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
UNSOL_CLASS3_ Class 3 Unsolicited Max UINT8 0 255 5 R/W: 2.0.0.XXX Log Changes
MAX Events Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
UNSOL_CLASS1_ Class 1 Unsolicited Max UINT32 1000 5000 R/W: 2.0.0.XXX Log Changes
DELAY Delay 10000 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
UNSOL_CLASS2_ Class 2 Unsolicited Max UINT32 1000 5000 R/W: 2.0.0.XXX Log Changes
DELAY Delay 10000 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
UNSOL_CLASS3_ Class 3 Unsolicited Max UINT32 1000 5000 R/W: 2.0.0.XXX Log Changes
DELAY Delay 10000 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
BIN_EVT_MAX Maximum Binary Input UINT16 0 17 Instance: R/W: 2.0.0.XXX Log Changes
events 1456 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
380 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DNP3
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
ANLG_EVT_MAX Maximum Analog Input UINT16 0 115 Instance: R/W: 2.0.0.XXX Log Changes
events 1456 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
BIN_CNTR_EVT_MA Maximum Binary Counter UINT16 0 10 Instance: R/W: 2.0.0.XXX Log Changes
X events 1456 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
FRZN_CNTR_EVT Maximum Frozen Counter UINT16 01 0 R/W: 2.0.0.XXX Log Changes
events Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
UNSOL_DEST_ Unsolicited Destination UINT16 0 0 R/W: 2.0.0.XXX Log Changes
ADDRESS Address 65519 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
REQUIRE_LOGIN Require Login ENUM16 01 Yes (1) Yes/No Option R/W: 2.0.0.XXX Log Changes
0 - No (208) Admin
1 - Yes R/O:
Engineer; Meas.
Tech; Operator;
Auditor
Object Parameter Listing 381
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.19 DNPSAV5 Parameters
Description: The DNPSAV5 object provides the parameters for configuring security authentication
Number of Instances: 1 instance may exist.
Storage Location: Saved to internal configuration memory.
Table 5-18: DNPSAV5 Parameters
DNPSAV5
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 DNP SAV5 R/W: 2.12.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.12.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status: BIN32 Normal Object Status R/O: 2.12.0.XXX Log Changes
0 – Normal (80) Admin; Engineer;
1 –In Alarm Meas. Tech;
2 – Failure Operator; Auditor
3 – Override
4 – Inactive
SA_STATUS DNP3 Secure Authentication ENUM16 0->1 0 Enable/Disable R/O: 2.12.0.XXX Log Changes
Status Selection (30) Admin; Engineer;
Meas. Tech;
Operator; Auditor
KEY_REQ_TIMEOUT Reply Timeout FLOAT 0->120 2 Duration (17) R/W: 2.12.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
382 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DNPSAV5
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
MAX_SES_KEY_STAT Max session key status count UINT8 2->255 5 R/W: 2.12.0.XXX Log Changes
_CNT Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 383
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.20 DO Parameters
Description: The DO object provides the parameters for configuring digital outputs.
Number of Instances: 62 instances may exist (2 per MIO module).
Storage Location: Saved to internal configuration memory.
Table 5-19: DO Parameters
DO
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Varies by instance R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
MOD_LOC Module Location UINT8 Varies by instance R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
CHANNEL Channel UINT8 Varies by instance R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
384 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DO
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
DESC Description UC20 Varies by instance R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DO_TYPE Digital Output Type ENUM16 05 Latching (0) Discrete R/W: 2.0.0.XXX Log Changes
0 - Latching Output Type Admin; Engineer;
1 - Momentary (46) Meas. Tech
2 - Toggle R/O:
3 - Time Duration Output Operator; Auditor
Momentary
4 - Time Duration Output
Toggle
5 - Scaled Pulse Output
USER_MODE Operation Mode ENUM16 02 Auto (0) IO Output R/W: 2.0.0.XXX Log Changes
0 - Auto User Selection Admin; Engineer;
1 - Override (131) Meas. Tech
2 - Auto Read R/O:
Operator; Auditor
FAULT_MODE Fault Mode ENUM16 01 Last Good (1) IO Fault R/W: 2.0.0.XXX Log Changes
0 - Fault Selection (136) Admin; Engineer;
1 - Last Good Meas. Tech
R/O:
Operator; Auditor
ACTUAL_MODE Actual Mode ENUM16 Live (0) Actual Mode R/O: 2.0.0.XXX
0 - Live (125) Admin; Engineer;
1 - Auto Meas. Tech
2 - Auto Read Operator; Auditor
3 - Override
4 - Calibration
5 - Fault
6 - Last Good
7 - Last Hour Average
8 – Ramp to Fault Value
9 – Ramp to Last Hour Avg
Object Parameter Listing 385
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DO
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
SELECTED Selected Value ENUM16 Off (0) Digital Status R/O: 2.0.0.XXX
0 - Off (134) Admin; Engineer;
1 - On Meas. Tech
Operator; Auditor
AUTO Auto Value ENUM16 01 Off (0) Digital Status R/W: 2.0.0.XXX
0 - Off (134) Admin; Engineer;
1 - On Meas. Tech
R/O:
Operator; Auditor
AUTO_EU Auto EU Value FLOAT 0 R/W: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
AUTO_READ_VAL Auto Read Value UINT8 0 Off (134-0) R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
AUTO_READ_PARA Auto Read Parameter ParamRef Undefined R/W: 2.0.0.XXX Log Changes
M Reference Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OVRD Override Value ENUM16 01 Off (0) Digital Status R/W: 2.0.0.XXX Log Changes
0 - Off (134) Admin; Engineer;
1 - On Meas. Tech
R/O:
Operator; Auditor
ZERO_DESC Description of Off State UC10 OFF R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
ONE_DESC Description of On State UC10 ON R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
386 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DO
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
R/O:
Operator; Auditor
FAULT Fault Value ENUM16 01 Off (0) Digital Status R/W: 2.0.0.XXX Log Changes
0 - Off (134) Admin; Engineer;
1 - On Meas. Tech
R/O:
Operator; Auditor
TIME_ON Time On FLOAT 0 1 s (17-0) R/W: 2.0.0.XXX
3600 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
TIME_OFF Time Off FLOAT 0 1 s (17-0) R/W: 2.0.0.XXX Log Changes
3600 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
ACCUM Number of Off-On UINT32 0 R/W: 2.0.0.XXX
Transitions Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
TDO_CYCLE_TIME Time Duration Output Cycle FLOAT 1 15 s (17-0) R/W: 2.0.0.XXX Log Changes
Time 3600 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
TDO_LOW_EU Time Duration Output Low FLOAT 0 R/W: 2.0.0.XXX Log Changes
EU Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
TDO_HIGH_EU Time Duration Output High FLOAT 100 R/W: 2.0.0.XXX Log Changes
EU Admin; Engineer;
Object Parameter Listing 387
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DO
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
R/O:
Operator; Auditor
TDO_0%_TIME Time Duration Output 0% FLOAT 3 s (17-0) R/W: 2.0.0.XXX ▪ Log Changes
Time Admin; Engineer; ▪ Verified
Meas. Tech
R/O:
Operator; Auditor
TDO_100%_TIME Time Duration Output 100% FLOAT 12 s (17-0) R/W: 2.0.0.XXX ▪ Log Changes
Time Admin; Engineer; ▪ Verified
Meas. Tech
R/O:
Operator; Auditor
TDO_TIME_ON TDO Time On FLOAT 0 s (17-0) R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
TDO_TIME_OFF TDO Time Off FLOAT 0 s (17-0) R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
SPO_INPUT_PRM Scaled Pulse Output ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Parameter Reference Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SPO_INPUT_VAL Scaled Pulse Output Value DOUBLE 0 R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
SPO_ACCUM_LIMIT Pulse Output Significance FLOAT 0 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
388 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DO
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OUTPUT_STATUS Output Health Status Bin16 Normal FB3000 DO R/O: 2.0.0.XXX
0 - Normal Status (303) Admin; Engineer;
1 - Not Licensed Meas. Tech
2 - Instance Inactive Operator; Auditor
3 - Comm Fail
4 - Override Active
5 - In Alarm
6 - Point Fail
7 - Auto Read Parameter
Invalid
8 - SPO Parameter Invalid
9 - Termination Missing
10 - Status Alarm
11 - Hardware Fail
RESET_MODE Action on Power Cycle ENUM16 01 Last Good (1) IO Fault R/W: 2.0.0.XXX Log Changes
0 - Fault Selection (136) Admin; Engineer;
1 - Last Good Meas. Tech
R/O:
Operator; Auditor
ALARM_MODE Digital Status Alarm Mode ENUM16 01 Off (0) Digital Status R/W: 2.0.0.XXX Log Changes
0 - Off (134) Admin; Engineer;
1 - On Meas. Tech
R/O:
Operator; Auditor
LOW_SIDE_ Low-side Switch ENUM16 01 Disable grounded DO low Side R/W: 2.0.0.XXX Log Changes
SWITCH 0 - Disable grounded output output (0) Switch (284) Admin; Engineer;
1 - Enable grounded output Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 389
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.21 DP Meter Parameters
Description: The DP Meter object provides the parameters for configuring differential pressure meters.
Number of Instances: 36 instances may exist (varies with license installed and user-configured number).
Storage Location: Saved to internal configuration memory.
Table 5-20: DP Meter Parameters
DP Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
“DP Mtr_X” (where Admin; Engineer; ▪ Legal
X is instance Meas. Tech
number between 1 R/O:
and 36) Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech;
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 Undefined R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
STATION_OBJ Station Assignment ObjectRef Station Station_1 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
390 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DP Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
FLUID_PROP_OBJ Fluid Properties Reference ObjectRef Fluid Instance: R/O: 2.0.0.XXX ▪ Log Changes
Prop “Fluid Prop_X” Admin; Engineer; ▪ Legal
(where X is instance Meas. Tech;
number between 1 Operator; Auditor
and 24)
MTR_TYPE Meter Type ENUM16 0 15 AGA3 Orifice Meter Type R/W: 2.0.0.XXX ▪ Log Changes
0 - AGA3 Orifice (Flange (Flange Taps) (0) Selection (50) Admin; Engineer; ▪ Legal
Taps) Meas. Tech
1 - ISO5167 Orifice (Flange R/O:
Taps) Operator; Auditor
2 - ISO5167 Orifice (Corner
Taps)
3 - ISO5167 Orifice (D & D/2
Taps)
4 - ISO5167 Venturi (As Cast)
5 - ISO5167 Venturi
(Machined)
6 - ISO5167 Venturi (Rough
Weld)
7 - ISO5167 Nozzle (Venturi)
8 - ISO5167 Nozzle (Long
Radius)
9 - ISO5167 Nozzle (ISA 1932)
10 - 1595 Conditioning
Orifice (Flange)
11 - 1595 Conditioning
Orifice (D and D/2)
12 - 405C Compact Orifice
13 - Cone (McCrometer V-
Cone)
14 - Cone (McCrometer
Wafer-Cone)
15 - Cone (NUFLO)
Object Parameter Listing 391
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DP Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
FLW_DIR Flow Direction ENUM16 01 Forward (0) Meter R/W: 2.0.0.XXX ▪ Log Changes
0 - Forward Direction (253) Admin; Engineer; ▪ Legal
1 - Reverse Meas. Tech
R/O:
Operator; Auditor
SER_NUM Serial Number UC20 Undefined R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
AGA3_METHOD AGA 3 Calculation Selection ENUM16 05 AGA3 2013 Volume AGA 3 R/W: 2.0.0.XXX ▪ Log Changes
0 - AGA3 1992 Volume (3) Calculation Admin; Engineer; ▪ Legal
1 - AGA3 1992 Mass Method (51) Meas. Tech
2 - AGA3 1992 Relative R/O:
Density Operator; Auditor
3 - AGA3 2013 Volume
4 - AGA3 2013 Mass
5 - AGA3 2013 Relative
Density
ISO5167_METHOD ISO 5167 Calculation ENUM16 02 ISO5167 2003 (2) ISO 5167 R/W: 2.0.0.XXX ▪ Log Changes
Selection Calculation Admin; Engineer; ▪ Legal
0 - ISO5167 1991 Method (52) Meas. Tech
1 - ISO5167 1998 R/O:
2 - ISO5167 2003 Operator; Auditor
RMT_ORIF_METHO Rosemount Orifice ENUM16 00 Based on ISO5167 Rosemount R/W: 2.0.0.XXX ▪ Log Changes
D Calculation 2003 (0) Orifice Method Admin; Engineer; ▪ Legal
0 - Based on ISO5167 2003 (186) Meas. Tech
R/O:
Operator; Auditor
ABAR_METHOD Annubar Calc Selection ENUM16 02 485-1 (0) Annubar Calc R/W: 2.0.0.XXX ▪ Log Changes
0 - 485-1 Selection (77) Admin; Engineer; ▪ Legal
1 - 485-2 Meas. Tech
2 - 485-3 R/O:
Operator; Auditor
392 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DP Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
MTR_DIAM Meter Diameter DOUBLE 4 in (7-0) R/W: 2.0.0.XXX ▪ Log Changes
0.0001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
PIPE_DIAM Pipe Diameter DOUBLE 8 in (7-0) R/W: 2.0.0.XXX ▪ Log Changes
0.0001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
PRESS_LOC Static Pressure Location ENUM16 01 Upstream (0) Pressure R/W: 2.0.0.XXX ▪ Log Changes
0 - Upstream Location (58) Admin; Engineer; ▪ Legal
1 - Downstream Meas. Tech
R/O:
Operator; Auditor
PRESS_TYPE Pressure Transmitter Type ENUM16 01 Absolute (1) SP Type R/W: 2.0.0XXX ▪ Log Changes
0 - Gauge Selection (57) Admin; Engineer; ▪ Legal
1 - Absolute Meas. Tech
R/O:
Operator; Auditor
TEMP_CORR_ Temperature Correction ENUM16 02 No Correction (0) Temperature R/W: 2.0.0.XXX ▪ Log Changes
METHOD 0 - No Correction Correction Admin; Engineer; ▪ Legal
1 - Isentropic Selection (120) Meas. Tech
2 - Isenthalpic (Joule- R/O:
Thomson) Operator; Auditor
NO_FLOW_LIM No Flow Cut-off Limit DOUBLE 0 0 inH2O (1-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
NO_FLOW_STATUS No Flow Status ENUM16 Not Flowing (0) No Flow Status R/O: 2.0.0.XXX Legal
0 - Not Flowing (239) Admin; Engineer;
1 - Flowing Meas. Tech
Operator; Auditor
Object Parameter Listing 393
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DP Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
DP_OBJ Differential Pressure Object ObjectRef Instance: R/W: 2.0.0.XXX ▪ Log Changes
1-24: Undefined Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
PF_OBJ Static Pressure Object ObjectRef Instance: R/W: 2.0.0.XXX ▪ Log Changes
1-24: Undefined Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
TF_OBJ Flowing Temperature Object ObjectRef Instance: R/W: 2.0.0.XXX ▪ Log Changes
1-24: Undefined Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
DP_INUSE Differential Pressure In Use DOUBLE 0 inH2O (1-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PF_INUSE Flowing Pressure In Use DOUBLE 0 psi(a) (2-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
TF_INUSE Flowing Temperature In Use DOUBLE 0 °F (3-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PIPE_MAT_OPT Pipe Material Option ENUM16 05 Carbon Steel (0) Material R/W: 2.0.0.XXX ▪ Log Changes
0 - Carbon Steel Selection (59) Admin; Engineer; ▪ Legal
1 - 304 Stainless Steel Meas. Tech
2 - 316 Stainless Steel R/O:
3 - Generic Stainless Operator; Auditor
4 - Monel 400
5 - User Entered Alpha
394 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DP Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
MTR_MAT_OPT Meter Material Option ENUM16 05 316 Stainless Steel Material R/W: 2.0.0.XXX ▪ Log Changes
0 - Carbon Steel (2) Selection (59) Admin; Engineer; ▪ Legal
1 - 304 Stainless Steel Meas. Tech
2 - 316 Stainless Steel R/O:
3 - Generic Stainless Operator; Auditor
4 - Monel 400
5 - User Entered Alpha
PIPE_DIAM_REF Pipe Diameter Reference DOUBLE 68 °F (3-0) R/W: 2.0.0.XXX ▪ Log Changes
Temperature Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
MTR_DIAM_REF Meter Diameter Reference DOUBLE 68 °F (3-0) R/W: 2.0.0.XXX ▪ Log Changes
Temperature Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
MTR_ALPHA_OVRD Meter Material User Alpha DOUBLE 0.00000889 in./in.-°F (222- R/W: 2.0.0.XXX ▪ Log Changes
0) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
MTR_ALPHA_SEL Meter Material Alpha DOUBLE 0.00000889 in./in.-°F (222- R/O: 2.0.0.XXX Legal
0) Admin; Engineer;
Meas. Tech;
Operator; Auditor
PIPE_ALPHA_OVRD Pipe Material User Alpha DOUBLE 0.0000062 in./in.-°F (222- R/W: 2.0.0.XXX ▪ Log Changes
0) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
PIPE_ALPHA_SEL Pipe Material Alpha DOUBLE 0.0000062 in./in.-°F (222- R/O: 2.0.0.XXX Legal
0) Admin; Engineer;
Meas. Tech;
Operator; Auditor
Object Parameter Listing 395
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DP Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
FLW_ALM_OBJ Flow Alarm Object ObjectRef Instance: R/O: 2.0.0.XXX Legal
“Alarm_X” (where X Admin; Engineer;
is instance number Meas. Tech;
between 1 and 24) Operator; Auditor
FCALC_ALM Flow Calculation Alarm Code BIN32 Normal DP Flow R/W: 2.0.0.XXX Legal
0 - Normal Calculation Admin; Engineer;
1 - Invalid Input(s) Alarm (206) Meas. Tech
2 - Invalid Configuration R/O:
3 - Calculation Error Operator; Auditor
4 - Boundary Error
5 - Invalid Station
Assignment
6-8 - Undefined
9 - Differential Pressure
10 - Pressure
11 - Temperature
12 - Flowing
Density/Compressibility
13 - Base
Density/Compressibility
14 - Relative Density
15 - Heating Value/Enthalpy
16 - Viscosity
17 - User Correction Factor
18 - Total/Increment
19 - Integral Multiplier Value
20-25 - Undefined
26 - Beta Ratio
27 - DP/P Ratio
28 - Isentropic Exponent
29 - Reynolds Number
30 - Pressure Loss/Pressure
Loss Ratio
31 - Alpha
32 - Expansion Factor
396 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DP Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
MTR_DIAM_SEL Corrected Meter Diameter DOUBLE 4 in (7-0) R/O: 2.0.0.XXX Legal
0.0001 Admin; Engineer;
Meas. Tech;
Operator; Auditor
PIPE_DIAM_SEL Corrected Pipe Diameter DOUBLE 8 in (7-0) R/O: 2.0.0.XXX Legal
0.0001 Admin; Engineer;
Meas. Tech;
Operator; Auditor
BETA_SEL Selected Diameter Ratio DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
PLOSS_SEL Selected Pressure Loss DOUBLE 0 0 inH2O (1-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
REL_PLOSS_RATIO Relative Pressure Loss Ratio DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
RE_SEL Reynolds Number DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
CD_OVRD Discharge Coefficient DOUBLE 0.11 0.6 R/W: 2.0.0.XXX ▪ Log Changes
Override Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
CD_CALC Discharge Coefficient DOUBLE 0.6 R/O: 2.0.0.XXX Legal
Calculated Admin; Engineer;
Meas. Tech;
Operator; Auditor
Object Parameter Listing 397
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DP Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
CD_UMODE Discharge Coefficient User ENUM16 12 Calculated (2) User Mode R/W: 2.0.0.XXX ▪ Log Changes
Mode Selection 2 (97) Admin; Engineer; ▪ Legal
1 - Override Meas. Tech
2 - Calculated R/O:
Operator; Auditor
CD_SEL Selected Discharge DOUBLE 0 R/O: 2.0.0.XXX Legal
Coefficient Admin; Engineer;
Meas. Tech
Operator; Auditor
PIPE_SCHED Pipe Schedule ENUM16 02 Schedule 10 (0) Pipe Schedule R/W: 2.0.0.XXX ▪ Log Changes
0 - Schedule 10 (184) Admin; Engineer; ▪ Legal
1 - Schedule 40 Meas. Tech
2 - Schedule 80 R/O:
Operator; Auditor
FS_SEL Pipe Schedule Adjustment DOUBLE 1 R/O: 2.0.0.XXX Legal
Factor Admin; Engineer;
Meas. Tech
Operator; Auditor
COEFF_CURVE_OPT Discharge Coefficient Option ENUM16 01 Flow Equation Calculated Cd R/W: 2.0.0.XXX ▪ Log Changes
0 - Flow Equation Standard Standard (0) (223) Admin; Engineer; ▪ Legal
1 - Calibrated Discharge Meas. Tech
Coefficient Curve R/O:
Operator; Auditor
COEFF_1 Discharge/Flow Coefficient 1 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_1_FLOW Reynolds Number / Flowrate DOUBLE 0 0 R/W: ▪ Log Changes
1 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_2 Discharge/Flow Coefficient 2 DOUBLE 0 0 R/W: ▪ Log Changes
Admin; Engineer; ▪ Legal
398 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DP Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
R/O:
Operator; Auditor
COEFF_2_FLOW Reynolds Number / Flowrate DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
2 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_3 Discharge/Flow Coefficient 3 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_3_FLOW Reynolds Number / Flowrate DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
3 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_4 Discharge/Flow Coefficient 4 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_4_FLOW Reynolds Number / Flowrate DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
4 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_5 Discharge/Flow Coefficient 5 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_5_FLOW Reynolds Number / Flowrate DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
5 Admin; Engineer; ▪ Legal
Object Parameter Listing 399
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DP Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
R/O:
Operator; Auditor
COEFF_6 Discharge/Flow Coefficient 6 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_6_FLOW Reynolds Number / Flowrate DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
6 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_7 Discharge/Flow Coefficient 7 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_7_FLOW Reynolds Number / Flowrate DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
7 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_8 Discharge/Flow Coefficient 8 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_8_FLOW Reynolds Number / Flowrate DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
8 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_9 Discharge/Flow Coefficient 9 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
400 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DP Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
R/O:
Operator; Auditor
COEFF_9_FLOW Reynolds Number / Flowrate DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
9 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_10 Discharge/Flow Coefficient DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
10 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_10_FLOW Reynolds Number / Flowrate DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
10 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_11 Discharge/Flow Coefficient DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
11 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_11_FLOW Reynolds Number / Flowrate DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
11 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_12 Discharge/Flow Coefficient DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
12 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_12_FLOW Reynolds Number / Flowrate DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
12 Admin; Engineer; ▪ Legal
Object Parameter Listing 401
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DP Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
R/O:
Operator; Auditor
COEFF_13 Discharge/Flow Coefficient DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
13 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_13_FLOW Reynolds Number / Flowrate DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
13 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_14 Discharge/Flow Coefficient DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
14 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_14_FLOW Reynolds Number / Flowrate DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
14 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_15 Discharge/Flow Coefficient DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
15 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_15_FLOW Reynolds Number / Flowrate DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
15 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_16 Discharge/Flow Coefficient DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
16 Admin; Engineer; ▪ Legal
402 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DP Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
R/O:
Operator; Auditor
COEFF_16_FLOW Reynolds Number / Flowrate DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
16 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_17 Discharge/Flow Coefficient DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
17 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_17_FLOW Reynolds Number / Flowrate DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
17 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_18 Discharge/Flow Coefficient DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
18 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_18_FLOW Reynolds Number / Flowrate DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
18 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_19 Discharge/Flow Coefficient DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
19 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_19_FLOW Reynolds Number / Flowrate DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
19 Admin; Engineer; ▪ Legal
Object Parameter Listing 403
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DP Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
R/O:
Operator; Auditor
COEFF_20 Discharge/Flow Coefficient DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
20 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COEFF_20_FLOW Reynolds Number / Flowrate DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
20 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
Y1_SEL Upstream Expansion Factor DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
EV_SEL Velocity of Approach DOUBLE 1 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
IV_SEL Integral Value DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
IMV_SEL Integral Multiplier Value DOUBLE 1 R/O: 2.0.0.XXX Legal
(IMV/C-Factor) Admin; Engineer;
Meas. Tech;
Operator; Auditor
USER_CORR_ User Correction Factor DOUBLE 0 1 R/W: 2.0.0.XXX ▪ Log Changes
FACTOR Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
404 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DP Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
UVOL_RATE Uncorrected Volume Flow DOUBLE 0 MCF/d (12-7) R/O: 2.0.0.XXX Legal
Rate Admin; Engineer;
Meas. Tech;
Operator; Auditor
SVOL_RATE Corrected Volume Flow Rate DOUBLE 0 MCF/d (12-7) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
MASS_RATE Mass Flow Rate DOUBLE 0 Mlb/d (13-7) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
ENERGY_RATE Energy Flow Rate DOUBLE 0 MMBtu/d R/O: 2.0.0.XXX Legal
(14-7) Admin; Engineer;
Meas. Tech;
Operator; Auditor
UVOL_RAW_TOT Uncorrected Volume Total DOUBLE 0 MCF (9-2) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
SVOL_RAW_TOT Corrected Volume Total DOUBLE 0 MCF (9-2) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
MASS_RAW_TOT Mass Total DOUBLE 0 Mlb (10-2) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
ENERGY_RAW_TOT Energy Total DOUBLE 0 MMBtu (11-1) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
FLWTM_RAW_TOT Flow Time Total DOUBLE 0 s (359-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Object Parameter Listing 405
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DP Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech;
Operator; Auditor
IV_RAW_TOT Integral Value Total DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
UVOL_TOT_OBJ Uncorrected Volume Total ObjectRef Total Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Object Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
SVOL_TOT_OBJ Corrected Volume Total ObjectRef Total Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Object Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
MASS_TOT_OBJ Mass Total Object ObjectRef Total Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
ENERGY_TOT_OBJ Energy Total Object ObjectRef Total Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FLWTM_TOT_OBJ Flow Time Total Object ObjectRef Total Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
IV_TOT_OBJ Integral Value Total Object ObjectRef Total Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
406 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DP Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
INSPECT_TIME Last Meter Inspection Time Time Undefined R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
CALIB_FACTOR Calibration Factor DOUBLE 1 R/W: 2.0.0.XXX ▪ Log Changes
0.0001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
UVOL_FLT_TOT_OBJ Uncorrected Volume Fault ObjectRef Total Varies by instance R/W: 2.9.0.XXX ▪ Log Changes
Total Object Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
SVOL_FLT_TOT_OBJ Corrected Volume Fault Total ObjectRef Total Varies by instance R/W: 2.9.0.XXX ▪ Log Changes
Object Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
MASS_FLT_TOT_OBJ Mass Fault Total Object ObjectRef Total Varies by instance R/W: 2.9.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
ENERGY_FLT_TOT_ Energy Fault Total Object ObjectRef Total Varies by instance R/W: 2.9.0.XXX ▪ Log Changes
OBJ Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 407
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DP Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Y1.1_OVRD Override Upstream DOUBLE 0.12 1 R/W: 2.14.0.XX ▪ Log Changes
Expansion Factor Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
Y1_UMODE Upstream Expansion Factor ENUM16 2 User Mode R/W: 2.14.0.XX ▪ Log Changes
Selection 3 (97) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
PF_INUSE_G Flowing Pressure In Use DOUBLE Gauge R/W: 2.17.0.XX ▪ Legal
(Gauge) Pressure (29) Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
408 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.22 DP Parameters
Description: The DP object provides the parameters for configuring differential pressure sensors.
Number of Instances: 20 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-21: DP Parameters
DP
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
“4088B_X DP” Admin; Engineer; ▪ Legal
(where X is instance Meas. Tech
number between 1 R/O:
and 20) Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech;
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
MOD_LOC Module Location UINT8 1 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
CHANNEL Channel UINT8 Instance: R/O: 2.0.0.XXX Legal
“1_X” (where X is Admin; Engineer;
instance number Meas. Tech;
between 1 and 20) Operator; Auditor
Object Parameter Listing 409
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DP
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
DESC Description UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
“4088B_X DP” Admin; Engineer; ▪ Legal
(where X is instance Meas. Tech
number between 1 R/O:
and 20) Operator; Auditor
UNITS Units ENUM16 06 inH2O@60°F (0) Differential R/W: 2.0.0.XXX ▪ Log Changes
0 - inH2O@60°F Pressure Admin; Engineer; ▪ Legal
1 - inH2O@68°F Selection (26) Meas. Tech
2 - kPa R/O:
3 - mbar Operator; Auditor
4 - kg/cm²
5 - psi
6 - bar
LIVE Live Value FLOAT 0 inH2O (1-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
OVRD Override Value FLOAT 0 inH2O (1-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FAULT Fault Value FLOAT 0 inH2O (1-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
LAST_GOOD Last Good Value FLOAT 0 inH2O (1-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
SELECTED Selected Value FLOAT 0 inH2O (1-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
410 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DP
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
USER_MODE Operation Mode ENUM16 01 Live (0) User Selection R/W: 2.0.0.XXX ▪ Log Changes
0 - Live (31) Admin; Engineer; ▪ Legal
1 - Override Meas. Tech
R/O:
Operator; Auditor
FAULT_MODE Fault Mode ENUM16 03 Live (0) Fault Selection R/W: 2.0.0.XXX ▪ Log Changes
0 - Live (32) Admin; Engineer; ▪ Legal
1 - Fault Meas. Tech
2 - Last Good R/O:
3 – Last Hour Average Operator; Auditor
REV_DP Reverse Differential Pressure FLOAT 0 inH2O (1-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
DAMPING Damping Time FLOAT 060 0 s (17-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
ALM_OBJ Alarm Reference ObjectRef Instance: R/O: 2.0.0.XXX Legal
1-Alarm_2001 Admin; Engineer;
2-Alarm_2004 Meas. Tech;
3-Alarm_2007 Operator; Auditor
4-Alarm_2010
5-Alarm_2013
6-Alarm_2016
7-Alarm_2019
8-Alarm_2022
9-Alarm_2025
10-Alarm_2028
11-Alarm_2031
12-Alarm_2034
13-Alarm_2037
14-Alarm_2040
15-Alarm_2043
Object Parameter Listing 411
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DP
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
16-Alarm_2046
17-Alarm_2049
18-Alarm_2052
19-Alarm_2055
20-Alarm_2058
URL Upper Range Limit FLOAT 0 inH2O (1-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
LRL Lower Range Limit FLOAT 0 inH2O (1-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
MONITOR_MAX Monitor Maximum FLOAT 250 inH2O (1-0) R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
MONITOR_MIN Monitor Minimum FLOAT 0 inH2O (1-0) R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
MIN_SPAN Minimum Span FLOAT 0 inH2O (1-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
INPUT_STATUS Input Health Status BIN16 Normal Alarm Status R/O: 2.0.0.XXX Legal
0 - Normal DP SP (44) Admin; Engineer;
1 - Not Licensed Meas. Tech
2 - Instance Inactive Operator; Auditor
3 - Comm Fail
4 - Override Active
5 - In Alarm
6 - Point Fail
412 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
DP
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
7 - Above URL
8 - Below LRL
9 - Input Frozen
CAL_OBJ Calibration Reference ObjectRef Instance: R/O: 2.0.0.XXX Legal
1-FLTCal_1-1 Admin; Engineer;
2-FLTCal_1-4 Meas. Tech
3-FLTCal_1-7 Operator; Auditor
4-FLTCal_1-10
5-FLTCal_1-13
6-FLTCal_1-16
7-FLTCal_1-19
8-FLTCal_1-22
9-FLTCal_1-25
10-FLTCal_1-28
11-FLTCal_1-31
12-FLTCal_1-34
13-FLTCal_1-37
14-FLTCal_1-40
15-FLTCal_1-43
16-FLTCal_1-46
17-FLTCal_1-49
18-FLTCal_1-52
19-FLTCal_1-55
20-FLTCal_1-58
LAST_HOUR_ Last Hour Average Value FLOAT 0 inH2O (1-0) R/O: 2.5.0.XXX Legal
AVERAGE Admin; Engineer;
Meas. Tech;
Operator; Auditor
Object Parameter Listing 413
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.23 Effect Parameters
Description: The Effect object provides the parameters for configuring custom logic components.
Number of Instances: Between 0 and 100 instances may exist; by default, 16 exist.
Storage Location: Saved to internal configuration memory.
Table 5-22: Effect Parameters
Effect
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX Log Changes
“Effect_X” (where X Admin; Engineer
is instance number R/O:
between 1 and 100) Meas. Tech;
Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX Log Changes
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech;
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 Instance: R/W: 2.0.0.XXX Log Changes
“Effect_X” (where X Admin; Engineer
is instance number R/O:
between 1 and 100) Meas. Tech;
Operator; Auditor
EFFECT_ENABLE Enable Switch ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX Log Changes
0 - Disable Selection (30) Admin; Engineer
1 - Enable R/O:
414 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Effect
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech;
Operator; Auditor
OUT_POINT Output Definition ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
OUT_DESC Description UC20 Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
OUT_VALUE Value FLOAT 0 R/O: 2.0.0.XXX
Admin; Engineer
Meas. Tech;
Operator; Auditor
ACTIVE_VALUE Output Active Value to Write FLOAT 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
INACTIVE_VALUE Output Inactive Value to FLOAT 0 R/W: 2.0.0.XXX Log Changes
Write Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
INACTIVE_VAL_SET Inactive Value Set Enable ENUM16 01 Enable (1) Enable/Disable R/W: 2.0.0.XXX Log Changes
0 - Disable Selection (30) Admin; Engineer
1 - Enable R/O:
Meas. Tech;
Operator; Auditor
ASSERT_OUTVAL_ Assert Output Continuously ENUM16 03 Both States (3) Effect Output R/W: 2.0.0.XXX Log Changes
TYPE 0 - Neither State Assert Type Admin; Engineer
1 - Active State Only (175) R/O:
Object Parameter Listing 415
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Effect
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
2 - Inactive State Only Meas. Tech;
3 - Both States Operator; Auditor
EFFECT_TRIP_ Effect Trip Status ENUM16 Inactive (0) Action Block R/O: 2.0.0.XXX
STATUS 0 - Inactive Status (166) Admin; Engineer;
1 - Active Meas. Tech
Operator; Auditor
FIRST_OUT_INST First Out Effect Instance UINT16 0 R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
FIRST_OUT_TAG First Out Effect Tag UC20 Undefined R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
REQUIRES_RESET Effect Requires Reset When ENUM16 01 No Reset Required Effect Reset R/W: 2.0.0.XXX Log Changes
Tripped (0) Option (176) Admin; Engineer
0 - No Reset Required R/O:
1 - Reset Required Meas. Tech;
Operator; Auditor
RESET_POINT Reset Definition ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
RESET_READY Effect Ready for Reset ENUM16 01 No Reset Needed Effect Reset R/O: 2.0.0.XXX
0 - No Reset Needed (0) Ready Values Admin; Engineer;
1 - Ready for Reset (177) Meas. Tech
Operator; Auditor
RESET_CMD_VALUE Reset Command Value UINT8 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
416 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.24 FBxNConfig Parameters
Description: The FBxNConfig object provides the parameters for configuring a communication port for FBxNet data
transfer.
Number of Instances: 7 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-23: FBxNConfig Parameters
FBxNConfig
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 FBxNet Config R/W: 2.5.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.5.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status: BIN32 Normal Object Status R/O: 2.5.0.XXX
0 – Normal (80) Admin; Engineer;
1 – In Alarm Meas. Tech;
2 – Failure Operator; Auditor
3 – Override
4 – Inactive
TCP_CONN_ TCP Connection Timeout UINT16 175 3 Duration (17-0) R/W: 2.5.0.XXX Log Changes
TIMEOUT Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
RX_TIMEOUT Receive Timeout UINT16 1300 5 Duration (17-0) R/W: 2.5.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
Object Parameter Listing 417
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
FBxNConfig
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
RETRIES_NUM Number of retries UINT8 010 1 R/W: 2.5.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
PUB_COMM_ENABL Enable Communications as a ENUM16 02 0 Publisher R/W: 2.5.0.XXX Log Changes
E Pub Device Comm Enable Admin; Engineer;
0 – Disabled (30) Meas. Tech
1 – Enable Read/Write R/O:
2 – Enable Read Only Operator; Auditor
RELOAD FILES Reload Port Files ENUM16 01 0 Start Poll (158) R/W: 2.5.0.XXX Non-persistent
0 – Cancel Admin; Engineer;
1 – Start Meas. Tech
R/O:
Operator; Auditor
CONN_PARSE_ Connection File Parsing BIN32 0 Connection File R/W: 2.5.0.XXX Non-persistent
STATUS Status Status (340) Admin; Engineer;
0 – No Error Meas. Tech
1 – File Open Fail R/O:
2 – Column Mismatch Operator; Auditor
3 – Missing Required Column
4 – Exceeded Max Data Point
5 - Empty Subscriber Tag
6 - Invalid FBxNet Data
Instance
7 - Missing or Invalid
Required Value
8 - Duplicate FBxNet Data
Instance
9 - Not Configured
10 - Exceeded Publisher Fault
SCAN_RATE Scan Rate FLOAT 0.560 5 Duration (17-0) R/W: 2.5.0.XXX Log Changes
Admin; Engineer;
418 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
FBxNConfig
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
R/O:
Operator; Auditor
ACTUAL_POLL_TIM Actual Poll Time FLOAT 0 Duration (17-0) R/W: 2.5.0.XXX
E Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
POLL_CYCLE Poll Cycle ENUM16 01 0 FBxNet Poll R/W: 2.5.0.XXX Log Changes
0 - Off Cycle (341) Admin; Engineer;
1 - On Meas. Tech
R/O:
Operator; Auditor
MAX_DATA_POINTS Max Supported Data Points UINT32 Instance: R/O: 2.5.0.XXX
1-4 & 7: 0 Admin; Engineer;
5-6: 5000 Meas. Tech;
Operator; Auditor
USED_DATA_POINT Current In Use Data Points UINT32 0 R/O: 2.5.0.XXX Non-Persistent
S Admin; Engineer;
Meas. Tech;
Operator; Auditor
CUR_CONNECT Currnent Number of UINT16 0 R/O: 2.5.0.XXX
Connections Admin; Engineer;
Meas. Tech;
Operator; Auditor
PUB_WATCHDOG_ Publisher Watchdog Timer UNIT16 0 ->300 10 Duration (17-0) R/W: 2.5.0.XXX Log Changes
TIMER Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 419
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.25 FBxNData Parameters
Description: The FBxNData object provides the parameters for configuring FBxNData.
Number of Instances: 5000 instances may exist
Storage Location: Saved to internal configuration memory.
Table 5-24: FBxNData Parameters
FBxNDevice
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 FBxNet Data R/O: 2.5.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.5.0.XXX
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.5.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
PUB_TAG Publisher Mapped Tag UC40 R/O: 2.5.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
SELECTED_FLOAT Selected Float Value Float 0 R/O: 2.5.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
SELECTED_DOUBLE Selected Double Value Double 0 R/O: 2.5.0.XXX
Admin; Engineer;
420 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
FBxNDevice
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
Operator; Auditor
SELECTED_LONG Selected Long Value UINT32 0 R/O: 2.5.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
INPUT_STATUS Input Health Status BIN32 Normal FBxNData Input R/O: 2.5.0.XXX
Status (348) Admin; Engineer;
Meas. Tech
Operator; Auditor
FAULT_MODE Fault Mode ENUM16 02 Live (0) Fault Selection R/O: 2.5.0.XXX
(32) Admin; Engineer;
Meas. Tech
Operator; Auditor
FAULT Fault Value Double 0 R/O: 2.5.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
LAST_GOOD Selected Value Double 0 R/O: 2.5.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
Object Parameter Listing 421
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.26 FBxNDevice Parameters
Description: The FBxNDevice object provides the parameters for viewing details about an FBxNet publisher device.
Number of Instances: 20 instances may exist (10 per Ethernet port).
Storage Location: Saved to internal configuration memory.
Table 5-25: FBxNDevice Parameters
FBxNDevice
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 FBxNet Device R/W: 2.5.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.5.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.5.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
CONN_STATUS Connection Status ENUM16 0 FBxNet Device R/W: 2.5.0.XXX Non-Persistent
0 - Not Started Connection Admin; Engineer;
1 – Connecting Status (327) Meas. Tech
2 – Resolving R/O:
3 – Online Operator; Auditor
4 – Offline
5 – Invalid
6 - Connection Timeout
7 - Transmit Error
422 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
FBxNDevice
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
8 - Response Timeout
9 - Resolving Failure
10 - Read Failure
11 – Disabled
12 - Online with Parameter
Error(s)
13 - No Account Found
14 - Authentication Failed
15 - Authenticating
MAP_PARSE_STATU Map File Parsing Status BIN32 0 Connection File R/W: 2.5.0.XXX Non-Persistent
S 0 - No Error Status (340) Admin; Engineer;
1 - File Open Fail Meas. Tech
2 - Column Mismatch R/O:
3 - Missing Required Column Operator; Auditor
4 - Exceeded Max Data
Points
5 - Empty Subscriber Tag
6 - Invalid FBxNet Data
Instance
7 - Missing or Invalid
Required Value
8 - Duplicate FBxNet Data
Instance
9 - Not Configured
10 - Exceeded Publisher Fault
MAP_ROWS_ Map Rows Loaded UINT16 0 R/W: 2.5.0.XXX Non-Persistent
LOADED Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DEVICE_NAME Device Name UC40 R/W: 2.5.0.XXX Non-Persistent
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 423
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
FBxNDevice
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
ENABLED Enabled ENUM16 0 Enable/Disable R/W: 2.5.0.XXX Non-Persistent
0 - Disable Selection (30) Admin; Engineer;
1 - Enable Meas. Tech
R/O:
Operator; Auditor
IP_ADDRESS IP Address BYTE4 0x00000000 IPv4 Address R/W: 2.5.0.XXX Non-Persistent
(41-0) Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
MAP_FILE_NAME Map File Name UC40 R/W: 2.5.0.XXX Non-Persistent
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
PARAM_ERR_COUN Parameter Error Count UINT32 0 R/W: 2.5.0.XXX Non-Persistent
T Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
424 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.27 FLTCal Parameters
Description: The FLTCal object provides the parameters for DP, Press, and RTD calibrations.
Number of Instances: 60 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-26: FLTCal Parameters
FLTCal
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
“FLTCal_1-X” Admin; Engineer; ▪ Legal
(where X is Meas. Tech
instance number R/O:
between 1 and 60) Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech;
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
“FLTCal_1-X” Admin; Engineer; ▪ Legal
(where X is Meas. Tech
instance number R/O:
between 1 and 60) Operator; Auditor
TIMEOUT Inactivity Timeout UINT16 1 60 min (17-1) R/W: 2.0.0.XXX ▪ Log Changes
1440 Admin; Engineer; ▪ Legal
Meas. Tech
Object Parameter Listing 425
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
FLTCal
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
TO_TIME_ Remaining Time Before UINT16 0 min (17-1) R/O: 2.0.0.XXX Legal
REMAINING Timeout Admin; Engineer;
Meas. Tech;
Operator; Auditor
LAST_CAL Time of Last Calibration Time Undefined R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
ZERO_SHIFT Zero Shift FLOAT 0 Instance: R/O: 2.0.0.XXX Legal
1 - inH2O (1-0) Admin; Engineer;
2 - psi(a) (2-0) Meas. Tech;
3 - °F (242-0) Operator; Auditor
Instances 4
through 60
repeat the
same pattern
as above for
every three
instances (that
is, 4,5,6; 7,8,9,
and so on)
USER_ZERO_VAL Calibrated Zero FLOAT 0 Instance: R/O: 2.0.0.XXX Legal
see ZERO_SHIFT Admin; Engineer;
above Meas. Tech;
Operator; Auditor
USER_SPAN_VAL Calibrated Span FLOAT 0 Instance: R/O: 2.0.0.XXX Legal
see ZERO_SHIFT Admin; Engineer;
above Meas. Tech;
Operator; Auditor
USER_MID1_VAL Calibrated Midpoint 1 FLOAT 0 Instance: R/O: 2.0.0.XXX Legal
see ZERO_SHIFT Admin; Engineer;
above Meas. Tech;
Operator; Auditor
426 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
FLTCal
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
USER_MID2_VAL Calibrated Midpoint 2 FLOAT 0 Instance: R/O: 2.0.0.XXX Legal
see ZERO_SHIFT Admin; Engineer;
above Meas. Tech;
Operator; Auditor
USER_MID3_VAL Calibrated Midpoint 3 FLOAT 0 Instance: R/O: 2.0.0.XXX Legal
see ZERO_SHIFT Admin; Engineer;
above Meas. Tech;
Operator; Auditor
VER_DATE Time of Last Verification Time 0 R/W: 2.0.0.XXX Legal
Admin; Engineer;
R/O:
Meas. Tech
Operator; Auditor
VER_PT1_FOUND Verification Point 1 As Found FLOAT 0 Instance: R/O: 2.0.0.XXX Legal
see ZERO_SHIFT Admin; Engineer;
above Meas. Tech;
Operator; Auditor
VER_PT2_FOUND Verification Point 2 As Found FLOAT 0 Instance: R/O: 2.0.0.XXX Legal
see ZERO_SHIFT Admin; Engineer;
above Meas. Tech
Operator; Auditor
VER_PT3_FOUND Verification Point 3 As Found FLOAT 0 Instance: R/O: 2.0.0.XXX Legal
see ZERO_SHIFT Admin; Engineer;
above Meas. Tech;
Operator; Auditor
VER_PT4_FOUND Verification Point 4 As Found FLOAT 0 Instance: R/O: 2.0.0.XXX Legal
see ZERO_SHIFT Admin; Engineer;
above Meas. Tech;
Operator; Auditor
VER_PT5_FOUND Verification Point 5 As Found FLOAT 0 Instance: R/O: 2.0.0.XXX Legal
see ZERO_SHIFT Admin; Engineer;
above Meas. Tech;
Operator; Auditor
Object Parameter Listing 427
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
FLTCal
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
VER_PT6_FOUND Verification Point 6 As Found FLOAT 0 Instance: R/O: 2.0.0.XXX Legal
see ZERO_SHIFT Admin; Engineer;
above Meas. Tech;
Operator; Auditor
VER_PT7_FOUND Verification Point 7 As Found FLOAT 0 Instance: R/O: 2.0.0.XXX Legal
see ZERO_SHIFT Admin; Engineer;
above Meas. Tech;;
Operator; Auditor
VER_PT1_LEFT Verification Point 1 As Left FLOAT 0 Instance: R/O: 2.0.0.XXX Legal
see ZERO_SHIFT Admin; Engineer;
above Meas. Tech;
Operator; Auditor
VER_PT2_LEFT Verification Point 2 As Left FLOAT 0 Instance: R/O: 2.0.0.XXX Legal
see ZERO_SHIFT Admin; Engineer;
above Meas. Tech;
Operator; Auditor
VER_PT3_LEFT Verification Point 3 As Left FLOAT 0 Instance: R/O: 2.0.0.XXX Legal
see ZERO_SHIFT Admin; Engineer;
above Meas. Tech;
Operator; Auditor
VER_PT4_LEFT Verification Point 4 As Left FLOAT 0 Instance: R/O: 2.0.0.XXX Legal
see ZERO_SHIFT Admin; Engineer;
above Meas. Tech;
Operator; Auditor
VER_PT5_LEFT Verification Point 5 As Left FLOAT 0 Instance: R/O: 2.0.0.XXX Legal
see ZERO_SHIFT Admin; Engineer;
above Meas. Tech;
Operator; Auditor
VER_PT6_LEFT Verification Point 6 As Left FLOAT 0 Instance: R/O: 2.0.0.XXX Legal
see ZERO_SHIFT Admin; Engineer;
above Meas. Tech;
Operator; Auditor
VER_PT7_LEFT Verification Point 7 As Left FLOAT 0 Instance: R/O: 2.0.0.XXX Legal
see ZERO_SHIFT Admin; Engineer;
above
428 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
FLTCal
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech;
Operator; Auditor
CAL_STATUS Calibration Status BIN16 Calibration Not In Calibration R/O: 2.0.0.XXX Legal
0 - Calibration Not In Progress Status (150) Admin; Engineer;
Progress Meas. Tech;
1 - Input Frozen Operator; Auditor
2 - Calibration In Progress
3 - Reserved
4 - Set Command Failed
5 - Timeout Ocurred
6 - Span Too Small
7 - Excess Correction
8 - Passed Parameter Too
Small
9 - Passed Parameter Too
Large
10 - Ideal Value Too Small
11 - Ideal Value Too Large
12 - Wrong Command
13 - Verification In Progress
CAL_COMMAND Calibration command ENUM16 Unfreeze (10) Calibration R/O: 2.0.0.XXX Legal
0 - None Command (149) Admin; Engineer;
1 - Freeze Meas. Tech;
2 - Start Calibration Operator; Auditor
3 - Set Zero
4 - Set Span
5 - Set Mid1
6 - Set Mid2
7 - Set Mid3
8 - Set Zero Shift
9 - Save Calibration
10 - Unfreeze
11 - Cancel Calibration
12 - Restore Factory Defaults
13 - Start Verification
Object Parameter Listing 429
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
FLTCal
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
14 - Set Verification Pt1
15 - Set Verification Pt2
16 - Set Verification Pt3
17 - Set Verification Pt4
18 - Set Verification Pt5
19 - Set Verification Pt6
20 - Set Verification Pt7
21 - Verification Done
22 - Restored Successfully
23 - Restore Failed
430 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.28 Fluid Prop Parameters
Description: The Fluid Prop object provides the parameters for configuring the physical properties of the fluid
flowing through each meter.
Number of Instances: 36 instances may exist (varies with the number and type of configured meter runs).
Storage Location: Saved to internal configuration memory.
Table 5-27: Fluid Properties Parameters
Fluid Prop
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
“DP Mtr_X FlProp” Admin; Engineer; ▪ Legal
(where X is instance Meas. Tech
number between 1 R/O:
and 36 or between Operator; Auditor
101 and 136)
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 431
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Fluid Prop
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
COMPONENTS_OBJ Components Object ObjectRef Compo Instance: R/W: 2.0.0.XXX ▪ Log Changes
nents “Components_X” Admin; Engineer; ▪ Legal
(where X is instance Meas. Tech
number between 1 R/O:
and 24 or between Operator; Auditor
101 and 124)
C1_INUSE In-use Methane DOUBLE 100 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
N2_INUSE In-use Nitrogen DOUBLE 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
CO2_INUSE In-use Carbon Dioxide DOUBLE 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
C2_INUSE In-use Ethane DOUBLE 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
C3_INUSE In-use Propane DOUBLE 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
H2O_INUSE In-use Water DOUBLE 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
H2S_INUSE In-use Hydrogen Sulfide DOUBLE 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
432 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Fluid Prop
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
H2_INUSE In-use Hydrogen DOUBLE 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
CO_INUSE In-use Carbon Monoxide DOUBLE 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
O2_INUSE In-use Oxygen DOUBLE 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
IC4_INUSE In-use i-Butane DOUBLE 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
NC4_INUSE In-use n-Butane DOUBLE 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
IC5_INUSE In-use i-Pentane DOUBLE 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
NC5_INUSE In-use n-Pentane DOUBLE 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
C6_INUSE In-use n-Hexane DOUBLE 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
C7_INUSE In-use n-Heptane DOUBLE 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Object Parameter Listing 433
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Fluid Prop
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech;
Operator; Auditor
C8_INUSE In-use n-Octane DOUBLE 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
C9_INUSE In-use n-Nonane DOUBLE 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
C10_INUSE In-use n-Decane DOUBLE 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
HE_INUSE In-use Helium DOUBLE 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
AR_INUSE In-use Argon DOUBLE 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
NEOC5_INUSE In-use Neopentane DOUBLE 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
BENZENE_INUSE In-use Benzene DOUBLE 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
TOLUENE_INUSE In-use Toluene DOUBLE 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
434 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Fluid Prop
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
H2O_CONTENT_ Water Content Mode ENUM16 03 Calculated (2) User Mode R/W: 2.0.0.XXX ▪ Log Changes
UMODE 0 - Measured Selection 1 (79) Admin; Engineer; ▪ Legal
1 - Override Meas. Tech
2 - Calculated R/O:
Operator; Auditor
H2O_CONTENT_ Water Content Parameter ParamRef Undefined R/W: 2.0.0.XXX ▪ Log Changes
PARAM Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
H2O_CONTENT_ Override Water Content DOUBLE 0 0 lb/MMSCF R/W: 2.0.0.XXX ▪ Log Changes
OVRD (21-0) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
H2O_CONTENT_ Calculated Water Content DOUBLE 0 lb/MMSCF R/O: 2.0.0.XXX Legal
CALC (21-0) Admin; Engineer;
Meas. Tech;
Operator; Auditor
H2O_CONTENT_SEL Selected Water Content DOUBLE 0 lb/MMSCF R/O: 2.0.0.XXX Legal
(21-0) Admin; Engineer;
Meas. Tech;
Operator; Auditor
HV_REAL_UMODE Heating Value Mode ENUM16 02 Calculated (2) User Mode R/W: 2.0.0.XXX ▪ Log Changes
0 - Measured Selection 1 (79) Admin; Engineer; ▪ Legal
1 - Override Meas. Tech
2 - Calculated R/O:
Operator; Auditor
HV_REAL_PARAM Heating Value Parameter ParamRef Undefined R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
HV_REAL_OVRD Override Heating Value DOUBLE 0 0 Btu/ft³ (5-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Object Parameter Listing 435
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Fluid Prop
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
R/O:
Operator; Auditor
HV_REAL_CALC Calculated Heating Value DOUBLE 0 Btu/ft³ (5-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
HV_REAL_SEL Selected Heating Value DOUBLE 0 Btu/ft³ (5-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
HV_REAL_FAULT Heating Value Fault Value DOUBLE 0 0 Btu/ft³ (5-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
HV_REAL_FAULT_ Heating Value Fault Mode ENUM16 02 Live (0) Fault Selection R/W: 2.0.0.XXX ▪ Log Changes
MODE 0 - Live (32) Admin; Engineer; ▪ Legal
1 - Fault Meas. Tech
2 - Last Good R/O:
Operator; Auditor
RD_REAL_UMODE Relative Density Mode ENUM16 02 Calculated (2) User Mode R/W: 2.0.0.XXX ▪ Log Changes
0 - Measured Selection 1 (79) Admin; Engineer; ▪ Legal
1 - Override Meas. Tech
2 - Calculated R/O:
Operator; Auditor
RD_REAL_PARAM Relative Density Parameter ParamRef Undefined R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
RD_REAL_OVRD Override Relative Density DOUBLE 0.573538 RD (306-0) R/W: 2.0.0.XXX ▪ Log Changes
0.0001 Admin; Engineer; ▪ Legal
Meas. Tech
436 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Fluid Prop
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
RD_REAL_CALC Calculated Relative Density DOUBLE 0.573538 RD (306-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
RD_REAL_SEL Selected Relative Density DOUBLE 0.573538 RD (306-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
RD_REAL_FAULT Relative Density Fault Value DOUBLE 0.6 RD (306-0) R/W: 2.0.0.XXX ▪ Log Changes
0.0001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
RD_REAL_FAULT_M Relative Density Fault Mode ENUM16 02 Live (0) Fault Selection R/W: 2.0.0.XXX ▪ Log Changes
ODE 0 - Live (32) Admin; Engineer; ▪ Legal
1 - Fault Meas. Tech
2 - Last Good R/O:
Operator; Auditor
ZB_UMODE Base Compressibility Mode ENUM16 12 Calculated (2) User Mode R/W: 2.0.0.XXX ▪ Log Changes
1 - Override Selection 2 (97) Admin; Engineer; ▪ Legal
2 - Calculated Meas. Tech
R/O:
Operator; Auditor
ZB_OVRD Override Base DOUBLE 0 R/W: 2.0.0.XXX ▪ Log Changes
Compressibility 0.0001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
ZB_CALC Calculated Base DOUBLE 0 R/O: 2.0.0.XXX Legal
Compressibility Admin; Engineer;
Meas. Tech;
Operator; Auditor
Object Parameter Listing 437
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Fluid Prop
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
ZB_SEL Selected Base DOUBLE 0 R/O: 2.0.0.XXX Legal
Compressibility Admin; Engineer;
Meas. Tech
Operator; Auditor
ZS_UMODE Standard Compressibility ENUM16 12 Calculated (2) User Mode R/W: 2.0.0.XXX ▪ Log Changes
Mode Selection 2 (97) Admin; Engineer; ▪ Legal
1 - Override Meas. Tech
2 - Calculated R/O:
Operator; Auditor
ZS_OVRD Override Standard DOUBLE 0 R/W: 2.0.0.XXX ▪ Log Changes
Compressibility 0.0001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
ZS_CALC Calculated Standard DOUBLE 0 R/O: 2.0.0.XXX Legal
Compressibility Admin; Engineer;
Meas. Tech;
Operator; Auditor
ZS_SEL Selected Standard DOUBLE 0 R/O: 2.0.0.XXX Legal
Compressibility Admin; Engineer;
Meas. Tech;
Operator; Auditor
ZF_UMODE Flowing Compressibility ENUM16 12 Calculated (2) User Mode R/W: 2.0.0.XXX ▪ Log Changes
Mode Selection 2 (97) Admin; Engineer; ▪ Legal
1 - Override Meas. Tech
2 - Calculated R/O:
Operator; Auditor
ZF_OVRD Override Flowing DOUBLE 0 R/W: 2.0.0.XXX ▪ Log Changes
Compressibility 0.0001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
ZF_CALC Calculated Flowing DOUBLE 0 R/O: 2.0.0.XXX Legal
Compressibility Admin; Engineer;
438 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Fluid Prop
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech;
Operator; Auditor
ZF_SEL Selected Flowing DOUBLE 0 R/O: 2.0.0.XXX Legal
Compressibility Admin; Engineer;
Meas. Tech;
Operator; Auditor
ZFPV_SEL Supercompressibility DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
DENSB_UMODE Base Density Mode ENUM16 02 Calculated (2) User Mode R/W: 2.0.0.XXX ▪ Log Changes
0 - Measured Selection 1 (79) Admin; Engineer; ▪ Legal
1 - Override Meas. Tech
2 - Calculated R/O:
Operator; Auditor
DENSB_PARAM Base Density Parameter ParamRef Undefined R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DENSB_OVRD Override Base Density DOUBLE 0 0.0001 lb/ft³ (4-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
DENSB_CALC Calculated Base Density DOUBLE 0 lb/ft³ (4-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
DENSB_SEL Selected Base Density DOUBLE 0 lb/ft³ (4-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
DENSF_UMODE Flowing Density Mode ENUM16 02 Calculated (2) User Mode R/W: 2.0.0.XXX ▪ Log Changes
0 - Measured Selection 1 (79) Admin; Engineer; ▪ Legal
Object Parameter Listing 439
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Fluid Prop
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
1 - Override Meas. Tech
2 - Calculated R/O:
Operator; Auditor
DENSF_PARAM Flowing Density Parameter ParamRef Undefined R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DENSF_OVRD Override Flowing Density DOUBLE 0 0.0001 lb/ft³ (4-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
DENSF_CALC Calculated Flowing Density DOUBLE 0 lb/ft³ (4-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
DENSF_SEL Selected Flowing Density DOUBLE 0 lb/ft³ (4-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
MOLAR_MASS Molar Mass DOUBLE 0 lb/lb-mol (25- R/O: 2.0.0.XXX Legal
0) Admin; Engineer;
Meas. Tech;
Operator; Auditor
DYN_VISC_OVRD Override Dynamic Viscosity DOUBLE 0.0000069 lb/ft-s (6-1) R/W: 2.0.0.XXX ▪ Log Changes
0.00000 Admin; Engineer; ▪ Legal
1 Meas. Tech
R/O:
Operator; Auditor
JT_OVRD Override Joule-Thomson DOUBLE 0 0 °F/psi (22-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
440 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Fluid Prop
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
JT_CALC Calculated Joule-Thomson DOUBLE 0 °F/psi (22-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
JT_SEL Selected Joule-Thomson DOUBLE 0 °F/psi (22-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
JT_UMODE Joule-Thomson Mode ENUM16 12 Calculated (2) User Mode R/W: 2.0.0.XXX ▪ Log Changes
1 - Override Selection 2 (97) Admin; Engineer; ▪ Legal
2 - Calculated Meas. Tech
R/O:
Operator; Auditor
ISENTR_OVRD Override Isentropic DOUBLE 1.3 R/W: 2.0.0.XXX ▪ Log Changes
Exponent 0.0001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
ISENTR_CALC Calculated Isentropic DOUBLE 0 R/O: 2.0.0.XXX Legal
Exponent Admin; Engineer;
Meas. Tech;
Operator; Auditor
ISENTR_SEL Selected Isentropic Exponent DOUBLE 1.3 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
ISENTR_UMODE Isentropic Exponent User ENUM16 12 Override (1) User Mode R/W: 2.0.0.XXX ▪ Log Changes
Mode Selection 2 (97) Admin; Engineer; ▪ Legal
1 - Override Meas. Tech
2 - Calculated R/O:
Operator; Auditor
WOBBE_INDEX_ Calculated Wobbe Index DOUBLE 0 Btu/ft³ (5-0) R/O: 2.0.0.XXX Legal
CALC Admin; Engineer;
Meas. Tech;
Operator; Auditor
Object Parameter Listing 441
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Fluid Prop
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
SOS_CALC Calculated Speed Of Sound DOUBLE 0 ft/s (187-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
PCALC_ALM Property Calculation Alarm BIN32 Property R/O: 2.0.0.XXX Legal
Code Calculation Admin; Engineer;
0 - Normal Alarm (207) Meas. Tech;
1 - Invalid Input(s) Operator; Auditor
2 - Invalid Configuration
3 - Calculation Error
4 - Boundary Error
5-9 - Undefined
9 - Pressure
10 - Temperature
11 - Flowing
Density/Compressibility
12 - Base
Density/Compressibility
13 - Relative Density
14 - Heating Value/Enthalpy
15 - Composition
16 - Water Content
17 - Atmospheric
Press/Gravitational Accel
18 - Viscosity
19 - Isentropic Exponent
20 - Speed of Sound
ZB_HV_SEL Base Compressibility for DOUBLE 0 R/O: 2.0.0.XXX Legal
Heating Value Admin; Engineer;
Meas. Tech;
Operator; Auditor
HV_COMP_SEL Selected Heating Value DOUBLE 0 Btu/ft³ (5-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
442 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Fluid Prop
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
DENS_RANGE Density Inputs Range ENUM16 0 Density Inputs R/O: 2.5.0.XXX Legal
Range (354) Admin; Engineer; Removed:
Meas. Tech; 2.7.0.XXX
Operator; Auditor
TOTAL_INUSE Total In Use DOUBLE 0100 0 Ration (18) R/O: 2.12.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
ISENTR PARAM Isentropic Exponent PRMREF Undefined R/W: 2.14.0.XX • Log Changes
Parameter Admin; Engineer; • Legal
Meas. Tech
R/O:
Operator; Auditor
DYN_VISC_SEL Selected Dynamic Viscosity DOUBLE 0.0000069 R/O: 2.14.0.XX • Log Changes
Admin; Engineer; • Legal
Meas. Tech;
Operator; Auditor
DYN_VISC_UMODE Dynamic Viscosity Mode ENUM16 01 1 User Mode R/W: 2.14.0.XX ▪ Log Changes
Selection 5 Admin; Engineer; ▪ Legal
(285) Meas. Tech
R/O:
Operator; Auditor
VYD_VISC_PARAM Dynamic Viscosity Parameter PRMREF Undefined R/W: 2.14.0.XX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 443
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.29 GC Config Parameters
Description: The Gas Chromatograph (CG) Config object provides the parameters for configuring gas
chromatographs.
Number of Instances: 6 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-28: GC Config Parameters
GC Config
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
“GC Config_X” Admin; Engineer; ▪ Legal
(where X is instance Meas. Tech
number between 1 R/O:
and 6) Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech;
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COMM_PORT_OBJ Comm Port to GC ObjectRef Comm Undefined R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
444 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Config
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
GC_MODBUS_ADD GC Device Address UINT8 1247 Instance: R/W: 2.0.0.XXX ▪ Log Changes
R 1-1 Admin; Engineer; ▪ Legal
2-2 Meas. Tech
3-3 R/O:
4-4 Operator; Auditor
5-5
6-6
GC_SERVER_IP_ GC Server IP Address ByteArray4 Undefined IPv4 Address R/W: 2.0.0.XXX ▪ Log Changes
ADDR (41) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GC_SERVER_PORT_ GC Server Port Number UINT16 502 R/W: 2.0.0.XXX ▪ Log Changes
NUM Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
POLL_INTERVAL Polling Interval UINT16 10 60 s (17-0) R/W: 2.0.0.XXX ▪ Log Changes
65535 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
LAST_POLL_TIME Last Poll Time Time Undefined R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
GC_POLL_ALM GC Polling Alarm BIN32 Normal GC Poll Alarm R/O: 2.0.0.XXX Legal
0 - Normal (237) Admin; Engineer;
1 - Poll Failed Meas. Tech
2 - Comp Code Match Error Operator; Auditor
3 - Poll Disabled
4 - Auto-config Fail
Object Parameter Listing 445
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Config
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
COMM_TIMEOUT Modbus polling timeout FLOAT 1300 3 s (17-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COMM_RETRIES Number of Modbus polling UINT8 0255 0 R/W: 2.0.0.XXX ▪ Log Changes
retries Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
SEL_MAPTABLE_ Maptable number UINT8 112 Instance: R/W: 2.0.0.XXX ▪ Log Changes
NUM 1-1 Admin; Engineer; ▪ Legal
2-2 Meas. Tech
3-3 R/O:
4-4 Operator; Auditor
5-5
6-6
GC_TYPE Chromat Type ENUM16 01 American (0) GC Type (203) R/W: 2.0.0.XXX ▪ Log Changes
0 - American Admin; Engineer; ▪ Legal
1 - European Meas. Tech
R/O:
Operator; Auditor
AUTO_CONFIG Auto Configure Command ENUM16 01 No Action (0) Auto Configure R/W: 2.0.0.XXX ▪ Log Changes
0 - No Action (193) Admin; Engineer; ▪ Legal
1 - Auto Configure Meas. Tech
R/O:
Operator; Auditor
POLL_MODE Enable communication to ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX ▪ Log Changes
the GC. Selection (30) Admin; Engineer; ▪ Legal
0 - Disable Meas. Tech
1 - Enable R/O:
Operator; Auditor
ALM_1_CHK Alarm 1 Check BIN16 Normal GC US Alarm 1 R/W: 2.0.0.XXX ▪ Log Changes
0 - Normal (204) Admin; Engineer; ▪ Legal
1 - A/D 0 Low Meas. Tech
446 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Config
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
2 - A/D 0 High R/O:
3 - A/D 1 Low Operator; Auditor
4 - A/D 1 High
5 - A/D 2 Low
6 - A/D 2 High
7 - A/D Cal Low
8 - A/D Cal High
9 - D/A 1 Low
10 - D/A 1 High
11 - D/A 2 Low
12 - D/A 2 High
13 - D/A 3 Low
14 - D/A 3 High
15 - Analyzer Failure
16 - Checksum Failure
ALM_2_CHK Alarm 2 Check BIN16 Normal GC US Alarm 2 R/W: 2.0.0.XXX ▪ Log Changes
0 - Normal (205) Admin; Engineer; ▪ Legal
1 - Power Failure Meas. Tech
2 - RF % Deviation R/O:
3 - Preamp Failure Operator; Auditor
4 - Adjust Preamp
CX_SPLIT_TYPE Cx+ Split Type ENUM16 03 Hexane Plus Split (0) Cx Split Type R/W: 2.0.0.XXX ▪ Log Changes
0 - Hexane Plus Split (191) Admin; Engineer; ▪ Legal
1 - Heptane Plus Split Meas. Tech
2 - Octane Plus Split R/O:
3 - Nonane Plus Split Operator; Auditor
AUTO_SPLIT_OPT Split based on Code ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX ▪ Log Changes
0 - Disable Selection (30) Admin; Engineer; ▪ Legal
1 - Enable Meas. Tech
R/O:
Operator; Auditor
C1_CODE Methane Component Code UINT16 0255 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Object Parameter Listing 447
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Config
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
C2_CODE Ethane Component Code UINT16 0255 1 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C3_CODE Propane Component Code UINT16 0255 2 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
IC4_CODE i-Butane Component Code UINT16 0255 3 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
NC4_CODE n-Butane Component Code UINT16 0255 4 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
NEOC5_CODE Neopentane Component UINT16 0255 7 R/W: 2.0.0.XXX ▪ Log Changes
Code Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
IC5_CODE i-Pentane Component Code UINT16 0255 5 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
NC5_CODE n-Pentane Component Code UINT16 0255 6 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
448 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Config
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
C6_CODE n-Hexane Component Code UINT16 0255 39 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
CX+_CODE Composite Component Code UINT16 0255 10 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
N2_CODE Nitrogen Component Code UINT16 0255 14 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
CO2_CODE Carbon Dioxide Component UINT16 0255 17 R/W: 2.0.0.XXX ▪ Log Changes
Code Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
H2S_CODE Hydrogen Sulfide UINT16 0255 40 R/W: 2.0.0.XXX ▪ Log Changes
Component Code Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
H2O_CODE Water Component Code UINT16 0255 44 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
HE_CODE Helium Component Code UINT16 0255 13 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Object Parameter Listing 449
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Config
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
O2_CODE Oxygen Component Code UINT16 0255 16 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
CO_CODE Carbon Monoxide UINT16 0255 15 R/W: 2.0.0.XXX ▪ Log Changes
Component Code Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
H2_CODE Hydrogen Component Code UINT16 0255 12 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C7_CODE n-Heptane Component Code UINT16 0255 45 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C8_CODE n-Octane Component Code UINT16 0255 20 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C9_CODE n-Nonane Component Code UINT16 0255 19 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C10_CODE n-Decane Component Code UINT16 0255 25 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
450 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Config
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
C11_CODE C11 component Code UINT16 0255 255 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C12_CODE C12 component Code UINT16 0255 255 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
AR_CODE Argon Component Code UINT16 0255 46 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
BENZENE_CODE Benzene Component Code UINT16 0255 255 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
TOLUENE_CODE Toluene Component Code UINT16 0255 255 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C6_SPLIT Heavy Gas % n-Hexane FLOAT 0100 60 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C7_SPLIT Heavy Gas % n-Heptane FLOAT 0100 30 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Object Parameter Listing 451
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Config
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
C8_SPLIT Heavy Gas % n-Octane FLOAT 0100 10 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C9_SPLIT Heavy Gas % n-Nonane FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C10_SPLIT Heavy Gas % n-Decane FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C11_SPLIT Heavy Gas % C11 FLOAT 0 100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C12_SPLIT Heavy Gas % C12 FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
452 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.30 GC Data Parameters
Description: The GC Data object provides the parameters for viewing data and configuring validation limits for a
specific gas chromatograph stream.
Number of Instances: 24 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-29: GC Data Parameters
GC Data
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
1-GC Data_1-1 Admin; Engineer; ▪ Legal
2-GC Data_1-2 Meas. Tech
3-GC Data_1-3 R/O:
4-GC Data_1-4 Operator; Auditor
5-GC Data_2-1
6-GC Data_2-2
7-GC Data_2-3
8 GC Data_2-4
Instances 9-24
follow the same
pattern
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
Object Parameter Listing 453
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Data
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
3 - Override
4 - Inactive
DESC Description UC20 Undefined R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GC_OBJ GC Configuration Object ObjectRef GC Instance: R/O: 2.0.0.XXX ▪ Log Changes
Config 1-4=GC Config_1 Admin; Engineer; ▪ Legal
5-8=GC Config_2 Meas. Tech
9-12=GC Config_3 Operator; Auditor
13-16=GC Config_4
17-20=GC Config_5
21-24=GC Config_6
STREAM_NUMBER Stream Number UINT16 0 Instance: R/W: 2.0.0.XXX ▪ Log Changes
65535 1-1 Admin; Engineer; ▪ Legal
2-2 Meas. Tech
3-3 R/O:
4-4 Operator; Auditor
Instances 5 through
24 repeat the same
pattern as above for
every four instances
(that is, 5,6,7,8;
9,10,11,12, and so
on)
DRY_SUPERIOR_HV Dry Superior Heating Value FLOAT 0 Btu/ft³ (5-0) R/O: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Operator; Auditor
454 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Data
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
DRY_SUPERIOR_HV High Dry Superior Heating FLOAT 1500 Btu/ft³ (5-0) R/W: 2.0.0.XXX ▪ Log Changes
_HI Value Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
DRY_SUPERIOR_HV Low Dry Superior Heating FLOAT 0 Btu/ft³ (5-0) R/W: 2.0.0.XXX ▪ Log Changes
_LO Value Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
SAT_SUPERIOR_HV Saturated Superior Heating FLOAT 0 Btu/ft³ (5-0) R/O: 2.0.0.XXX ▪ Log Changes
Value Admin; Engineer; ▪ Legal
Meas. Tech
Operator; Auditor
SAT_SUPERIOR_HV_ High Saturated Superior FLOAT 1500 Btu/ft³ (5-0) R/W: 2.0.0.XXX ▪ Log Changes
HI Heating Value Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
SAT_SUPERIOR_HV_ Low Saturated Superior FLOAT 0 Btu/ft³ (5-0) R/W: 2.0.0.XXX ▪ Log Changes
LO Heating Value Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
DRY_INFERIOR_HV Dry Inferior Heating Value FLOAT 0 Btu/ft³ (5-0) R/O: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Operator; Auditor
DRY_INFERIOR_HV_ High Dry Inferior Heating FLOAT 1500 Btu/ft³ (5-0) R/W: 2.0.0.XXX ▪ Log Changes
HI Value Admin; Engineer; ▪ Legal
Object Parameter Listing 455
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Data
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
R/O:
Operator; Auditor
DRY_INFERIOR_HV_ Low Dry Inferior Heating FLOAT 0 Btu/ft³ (5-0) R/W: 2.0.0.XXX ▪ Log Changes
LO Value Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
SAT_INFERIOR_HV Saturated Inferior Heating FLOAT 0 Btu/ft³ (5-0) R/O: 2.0.0.XXX ▪ Log Changes
Value Admin; Engineer; ▪ Legal
Meas. Tech
Operator; Auditor
SAT_INFERIOR_HV_ High Saturated Inferior FLOAT 1500 Btu/ft³ (5-0) R/W: 2.0.0.XXX ▪ Log Changes
HI Heating Value Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
SAT_INFERIOR_HV_ Low Saturated Inferior FLOAT 0 Btu/ft³ (5-0) R/W: 2.0.0.XXX ▪ Log Changes
LO Heating Value Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
RD Relative Density FLOAT 0 RD (306-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
RD_HI High Relative Density FLOAT 0.91 RD (306-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
456 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Data
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
RD_LO Low Relative Density FLOAT 0 RD (306-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
WOBBE_INDEX Wobbe Index FLOAT 0 Btu/ft³ (5-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
UNNORMAL_SUM Unnormalized Sum FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
COMP_SUM Normalized Component Sum FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
ALARM_1 Alarm 1 Code BIN16 Normal GC US Alarm 1 R/O: 2.0.0.XXX Legal
0 - Normal (204) Admin; Engineer;
1 - A/D 0 Low Meas. Tech
2 - A/D 0 High Operator; Auditor
3 - A/D 1 Low
4 - A/D 1 High
5 - A/D 2 Low
6 - A/D 2 High
7 - A/D Cal Low
8 - A/D Cal High
9 - D/A 1 Low
Object Parameter Listing 457
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Data
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
10 - D/A 1 High
11 - D/A 2 Low
12 - D/A 2 High
13 - D/A 3 Low
14 - D/A 3 High
15 - Analyzer Failure
16 - Checksum Failure
ALARM_2 Alarm 2 Code BIN16 Normal GC US Alarm 2 R/O: 2.0.0.XXX Legal
0 - Normal (205) Admin; Engineer;
1 - Power Failure Meas. Tech
2 - RF % Deviation Operator; Auditor
3 - Preamp Failure
4 - Adjust Preamp
VALIDATION_ALM Composition Validation BIN32 Normal GC Validation R/O: 2.0.0.XXX Legal
Alarm Alarm (192) Admin; Engineer;
0 - Normal Meas. Tech
1 - Component Limit Alarm Operator; Auditor
2 - Heating Value Limit Alarm
3 - Relative Density Limit
Alarm
4 - Un-normalized Mole Sum
Alarm
5 - Total Mole Sum Alarm
6 - Composition Deviation
Alarm
7 - Alarm 1
8 - Alarm 2
UNNORMAL_DEV_ Unnormalized Deviation FLOAT 05 2 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
LIM Limit Admin; Engineer; ▪ Legal
Meas. Tech
458 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Data
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
COMP_SUM_DEV_ Component Sum Deviation FLOAT 05 2 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
LIM Limit Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
COMP_DEV_LIM Component Deviation Alarm FLOAT 0 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Limit % of % Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C1_HI_LIM Methane High Limit FLOAT 0100 100 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C1_LO_LIM Methane Low Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
N2_HI_LIM Nitrogen High Limit FLOAT 0100 50 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
N2_LO_LIM Nitrogen Low Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Object Parameter Listing 459
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Data
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
CO2_HI_LIM Carbon Dioxide High Limit FLOAT 0100 80 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
CO2_LO_LIM Carbon Dioxide Low Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C2_HI_LIM Ethane High Limit FLOAT 0100 25 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C2_LO_LIM Ethane Low Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C3_HI_LIM Propane High Limit FLOAT 0100 6 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C3_LO_LIM Propane Low Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
460 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Data
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
H2O_HI_LIM Water High Limit FLOAT 0100 1.4 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
H2O_LO_LIM Water Low Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
H2S_HI_LIM Hydrogen Sulfide High Limit FLOAT 0100 4 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
H2S_LO_LIM Hydrogen Sulfide Low Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
H2_HI_LIM Hydrogen High Limit FLOAT 0100 100 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
H2_LO_LIM Hydrogen Low Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Object Parameter Listing 461
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Data
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
CO_HI_LIM Carbon Monoxide High Limit FLOAT 0100 10 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
CO_LO_LIM Carbon Monoxide Low Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
O2_HI_LIM Oxygen High Limit FLOAT 0100 1 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
O2_LO_LIM Oxygen Low Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
IC4_HI_LIM i-Butane High Limit FLOAT 0100 1.5 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
IC4_LO_LIM i-Butane Low Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
462 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Data
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
NC4_HI_LIM n-Butane High Limit FLOAT 0100 6 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
NC4_LO_LIM n-Butane Low Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
IC5_HI_LIM i-Pentane High Limit FLOAT 0100 2 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
IC5_LO_LIM i-Pentane Low Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
NC5_HI_LIM n-Pentane High Limit FLOAT 0100 2 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
NC5_LO_LIM n-Pentane Low Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Object Parameter Listing 463
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Data
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
C6_HI_LIM n-Hexane High Limit FLOAT 0100 2 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C6_LO_LIM n-Hexane Low Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C7_HI_LIM n-Heptane High Limit FLOAT 0100 0.2 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C7_LO_LIM n-Heptane Low Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C8_HI_LIM n-Octane High Limit FLOAT 0100 0.2 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C8_LO_LIM n-Octane Low Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
464 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Data
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
C9_HI_LIM n-Nonane High Limit FLOAT 0100 0.2 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C9_LO_LIM n-Nonane Low Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C10_HI_LIM n-Decane High Limit FLOAT 0100 0.2 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C10_LO_LIM n-Decane Low Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
HE_HI_LIM Helium High Limit FLOAT 0100 5 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
HE_LO_LIM Helium Low Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Object Parameter Listing 465
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Data
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
AR_HI_LIM Argon High Limit FLOAT 0100 3 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
AR_LO_LIM Argon Low Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
NEOC5_HI_LIM Neopentane High Limit FLOAT 0100 2 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
NEOC5_LO_LIM Neopentane Low Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
BENZENE_HI_LIM Benzene High Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
BENZENE_LO_LIM Benzene Low Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
466 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Data
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
TOLUENE_HI_LIM Toluene High Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
TOLUENE_LO_LIM Toluene Low Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C11_HI_LIM C11 High Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C11_LO_LIM C11 Low Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C12_HI_LIM C12 High Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
C12_LO_LIM C12 Low Limit FLOAT 0100 0 % (18-0) R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Object Parameter Listing 467
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Data
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
C1_VAL Methane FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
N2_VAL Nitrogen FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
CO2_VAL Carbon Dioxide FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
C2_VAL Ethane FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
C3_VAL Propane FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
H2O_VAL Water FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
H2S_VAL Hydrogen Sulfide FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
468 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Data
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
H2_VAL Hydrogen FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
CO_VAL Carbon Monoxide FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
O2_VAL Oxygen FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
IC4_VAL i-Butane FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
NC4_VAL n-Butane FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
IC5_VAL i-Pentane FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
NC5_VAL n-Pentane FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
C6_VAL n-Hexane FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Object Parameter Listing 469
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Data
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech;
Operator; Auditor
C7_VAL n-Heptane FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
C8_VAL n-Octane FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
C9_VAL n-Nonane FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
C10_VAL n-Decane FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
HE_VAL Helium FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
AR_VAL Argon FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
NEOC5_VAL Neopentane FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
470 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Data
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
BENZENE_VAL Benzene FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
TOLUENE_VAL Toluene FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
C11_VAL C11 FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
C12_VAL C12 FLOAT 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
COMP_UPDATE Components Updated by BIN32 None GC R/O: 2.0.0.XXX Legal
Chromatograph Component Admin; Engineer;
0 - None Update (189) Meas. Tech;
1 - Methane Operator; Auditor
2 - Nitrogen
3 - Carbon Dioxide
4 - Ethane
5 - Propane
6 - Water
7 - Hydrogen Sulfide
8 - Hydrogen
9 - Carbon Monoxide
10 - Oxygen
11 - i-Butane
Object Parameter Listing 471
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Data
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
12 - n-Butane
13 - i-Pentane
14 - n-Pentane
15 - Hexane
16 - Heptane
17 - Octane
18 - Nonane
19 - Decane
20 - Helium
21 - Argon
22 - neo-Pentane
23 - Benzene
24 - Toluene
25 - Undecane (C11)
26 - Dodecane (C12)
472 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.31 GC Stream Parameters
Description: The GC Stream object provides the parameters for viewing the data directly from the most recent gas
chromatograph analysis.
Number of Instances: 6 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-30: GC Stream Parameters
GC Stream
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
“CG Stream_X” Admin; Engineer; ▪ Legal
(where X is instance Meas. Tech
number between 1 R/O:
and 6) Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech;
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 Undefined R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 473
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Stream
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
GC_OBJ GC Configuration Object ObjectRef GC Instance: R/O: 2.0.0.XXX ▪ Log Changes
Config “CG Config_X” Admin; Engineer; ▪ Legal
(where X is instance Meas. Tech;
number between 1 Operator; Auditor
and 6)
CYCLE_STREAM_ Current Stream Number UINT16 0 R/W: 2.0.0.XXX Legal
NUM Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DRY_SUPERIOR_HV Dry Superior Heating Value FLOAT 0 Btu/ft³ (5-0) R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DRY_INFERIOR_HV Dry Inferior Heating Value FLOAT 0 Btu/ft³ (5-0) R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SAT_SUPERIOR_HV Saturated Superior Heating FLOAT 0 Btu/ft³ (5-0) R/W: 2.0.0.XXX Legal
Value Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SAT_INFERIOR_HV Saturated Inferior Heating FLOAT 0 Btu/ft³ (5-0) R/W: 2.0.0.XXX Legal
Value Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
RD Relative Density FLOAT 0 RD (306-0) R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
474 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Stream
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
WOBBE_INDEX Wobbe Index FLOAT 0 Btu/ft³ (5-0) R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
UNNORMAL_SUM Unnormalized Sum FLOAT 0 % (18-0) R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMPRESSIBILITY Compressibility FLOAT 0 R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SAMPLE_MINUTE Sample Minute of Last UINT16 0255 0 R/W: 2.0.0.XXX Legal
Analysis Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
NEW_ANALYSIS_ New Analysis Flag UINT16 01 0 R/W: 2.0.0.XXX Legal
FLAG Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
STREAM_LAST_ Stream Last Analyzed UINT16 0 R/W: 2.0.0.XXX Legal
ANALYZED Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 475
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Stream
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
ALARM_1 Alarm 1 Code BIN16 Normal GC US Alarm 1 R/W: 2.0.0.XXX Legal
0 - Normal (204) Admin; Engineer;
1 - A/D 0 Low Meas. Tech
2 - A/D 0 High R/O:
3 - A/D 1 Low Operator; Auditor
4 - A/D 1 High
5 - A/D 2 Low
6 - A/D 2 High
7 - A/D Cal Low
8 - A/D Cal High
9 - D/A 1 Low
10 - D/A 1 High
11 - D/A 2 Low
12 - D/A 2 High
13 - D/A 3 Low
14 - D/A 3 High
15 - Analyzer Failure
16 - Checksum Failure
ALARM_2 Alarm 2 Code BIN16 Normal GC US Alarm 2 R/W: 2.0.0.XXX Legal
0 - Normal (205) Admin; Engineer;
1 - Power Failure Meas. Tech
2 - RF % Deviation R/O:
3 - Preamp Failure Operator; Auditor
4 - Adjust Preamp
CAL_FLAG Calibration Flag UINT16 0255 1 R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_1_CODE Component 1 Code UINT16 0 R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
476 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Stream
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
COMP_2_CODE Component 2 Code UINT16 0 R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_3_CODE Component 3 Code UINT16 0 R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_4_CODE Component 4 Code UINT16 0 R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_5_CODE Component 5 Code UINT16 0 R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_6_CODE Component 6 Code UINT16 0 R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_7_CODE Component 7 Code UINT16 0 R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_8_CODE Component 8 Code UINT16 0 R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 477
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Stream
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
COMP_9_CODE Component 9 Code UINT16 0 R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_10_CODE Component 10 Code UINT16 0 R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_11_CODE Component 11 Code UINT16 0 R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_12_CODE Component 12 Code UINT16 0 R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_13_CODE Component 13 Code UINT16 0 R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_14_CODE Component 14 Code UINT16 0 R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_15_CODE Component 15 Code UINT16 0 R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
478 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Stream
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
COMP_16_CODE Component 16 Code UINT16 0 R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_1_RAW Component 1 Raw FLOAT 0 % (18-0) R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_2_RAW Component 2 Raw FLOAT 0 % (18-0) R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_3_RAW Component 3 Raw FLOAT 0 % (18-0) R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_4_RAW Component 4 Raw FLOAT 0 % (18-0) R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_5_RAW Component 5 Raw FLOAT 0 % (18-0) R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_6_RAW Component 6 Raw FLOAT 0 % (18-0) R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 479
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Stream
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
COMP_7_RAW Component 7 Raw FLOAT 0 % (18-0) R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_8_RAW Component 8 Raw FLOAT 0 % (18-0) R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_9_RAW Component 9 Raw FLOAT 0 % (18-0) R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_10_RAW Component 10 Raw FLOAT 0 % (18-0) R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_11_RAW Component 11 Raw FLOAT 0 % (18-0) R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_12_RAW Component 12 Raw FLOAT 0 % (18-0) R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_13_RAW Component 13 Raw FLOAT 0 % (18-0) R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
480 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
GC Stream
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
COMP_14_RAW Component 14 Raw FLOAT 0 % (18-0) R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_15_RAW Component 15 Raw FLOAT 0 % (18-0) R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
COMP_16_RAW Component 16 Raw FLOAT 0 % (18-0) R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 481
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.32 HART Parameters
Description: The HART object provides the parameters for configuring HART inputs.
Number of Instances: 28 instances may exist (4 for each HART module).
Storage Location: Saved to internal configuration memory.
Table 5-31: HART Parameters
HART
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 HART_X-Y R/W: 2.7.4.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 0→5 0 R/W: 2.7.4.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status: BIN32 Normal Object Status R/O: 2.7.4.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
HART_POLL_MODE Variables to Poll ENUM16 0->3 0 Hart Poll Mode R/W: 2.7.4.XXX ▪ Log Changes
0 = Skip (316) Admin; Engineer; ▪ Legal
1 = PV only Meas. Tech
2 = All Process R/O:
Operator; Auditor
3 = All Dynamic
POLL_ADDRESS Polling Address UINT8 0 R/O: 2.7.4.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
482 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
HART
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
ACTUAL_SCAN_TIM Actual Scan Time FLOAT 0 Seconds (310- R/O: 2.7.4.XXX Legal
E 0) Admin; Engineer;
Meas. Tech
Operator; Auditor
RESP_STATUS Response Status UINT16 0 R/O: 2.7.4.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
ACTIVE_ALARMS Active Alarms UINT8 0 R/O: 2.7.4.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PV_FAULT PV Fail Value FLOAT 0 HART Units R/W: 2.7.4.XXX ▪ Log Changes
(344) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
PV_ACTUAL_MODE PV Actual Mode ENUM16 0 Actual Mode R/O: 2.7.4.XXX Legal
0 - Live (125) Admin; Engineer;
1 - Auto Meas. Tech
2 - Auto Read Operator; Auditor
3 - Override
4 - Calibration
5 - Fault
6 - Last Good
7 - Last Hour Average
8 -Ramp to Fault Value
9 - Ramp to Last Hour Avg
PV_LIVE PV Live Val FLOAT 0 HART Units R/O: 2.7.4.XXX Legal
(344) Admin; Engineer;
Meas. Tech
Operator; Auditor
PV_OVRD PV Ovrd Val FLOAT 0 HART Units R/W: 2.7.4.XXX ▪ Log Changes
(344) Admin; Engineer; ▪ Legal
Meas. Tech
Object Parameter Listing 483
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
HART
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
PV_LAST_GOOD PV Lst Good FLOAT 0 HART Units R/O: 2.7.4.XXX Legal
(344) Admin; Engineer;
Meas. Tech
Operator; Auditor
PV_SELECTED PV Sel Val FLOAT 0 HART Units R/O: 2.7.4.XXX Legal
(344) Admin; Engineer;
Meas. Tech
Operator; Auditor
PV_USER_MODE PV Opr Mode ENUM16 0->1 0 User Selection R/W: 2.7.4.XXX ▪ Log Changes
0 = Live (31) Admin; Engineer; ▪ Legal
1 = Override Meas. Tech
R/O:
Operator; Auditor
PV_FAULT_MODE PV Flt Mode ENUM16 0->1 0 HART Fault R/W: 2.7.4.XXX ▪ Log Changes
0 = Fault Selection (317) Admin; Engineer; ▪ Legal
1 = Last Good Meas. Tech
R/O:
Operator; Auditor
SV_FAULT SV Fail Value FLOAT 0 HART Units R/W: 2.7.4.XXX ▪ Log Changes
(344) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
SV_ACTUAL_MODE SV Actual Mode ENUM16 0 Actual Mode R/O: 2.7.4.XXX Legal
0 - Live (125) Admin; Engineer;
1 - Auto Meas. Tech
2 - Auto Read Operator; Auditor
3 - Override
4 - Calibration
5 - Fault
6 - Last Good
7 - Last Hour Average
484 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
HART
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
8 -Ramp to Fault Value
9 - Ramp to Last Hour Avg
SV_LIVE SV Live Val FLOAT 0 HART Units R/O: 2.7.4.XXX Legal
(344) Admin; Engineer;
Meas. Tech
Operator; Auditor
SV_OVRD SV Ovrd Val FLOAT 0 HART Units R/W: 2.7.4.XXX ▪ Log Changes
(344) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
SV_LAST_GOOD SV Lst Good FLOAT 0 HART Units R/O: 2.7.4.XXX Legal
(344) Admin; Engineer;
Meas. Tech
Operator; Auditor
SV_SELECTED SV Sel Val FLOAT 0 HART Units R/O: 2.7.4.XXX Legal
(344) Admin; Engineer;
Meas. Tech
Operator; Auditor
SV_USER_MODE SV Opr Mode ENUM16 0->1 0 User Selection R/W: 2.7.4.XXX ▪ Log Changes
0 = Live (31) Admin; Engineer; ▪ Legal
1 = Override Meas. Tech
R/O:
Operator; Auditor
SV_FAULT_MODE SV Flt Mode ENUM16 0->1 0 HART Fault R/W: 2.7.4.XXX ▪ Log Changes
0 = Fault Selection (317) Admin; Engineer; ▪ Legal
1 = Last Good Meas. Tech
R/O:
Operator; Auditor
TV_FAULT TV Fail Value FLOAT 0 HART Units R/W: 2.7.4.XXX ▪ Log Changes
(344) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 485
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
HART
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
TV_ACTUAL_MODE TV Actual Mode ENUM16 0 Actual Mode R/O: 2.7.4.XXX Legal
0 - Live (125) Admin; Engineer;
1 - Auto Meas. Tech
2 - Auto Read Operator; Auditor
3 - Override
4 - Calibration
5 - Fault
6 - Last Good
7 - Last Hour Average
8 -Ramp to Fault Value
9 - Ramp to Last Hour Avg
TV_LIVE TV Live Val FLOAT 0 HART Units R/O: 2.7.4.XXX Legal
(344) Admin; Engineer;
Meas. Tech
Operator; Auditor
TV_OVRD TV Ovrd Val FLOAT 0 HART Units R/W: 2.7.4.XXX ▪ Log Changes
(344) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
TV_LAST_GOOD TV Lst Good FLOAT 0 HART Units R/O: 2.7.4.XXX Legal
(344) Admin; Engineer;
Meas. Tech
Operator; Auditor
TV_SELECTED TV Sel Val FLOAT 0 HART Units R/O: 2.7.4.XXX Legal
(344) Admin; Engineer;
Meas. Tech
Operator; Auditor
TV_USER_MODE TV Opr Mode ENUM16 0->1 0 User Selection R/W: 2.7.4.XXX ▪ Log Changes
0 = Live (31) Admin; Engineer; ▪ Legal
1 = Override Meas. Tech
R/O:
Operator; Auditor
TV_FAULT_MODE TV Flt Mode ENUM16 0->1 0 HART Fault R/W: 2.7.4.XXX ▪ Log Changes
Selection (317) ▪ Legal
486 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
HART
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
0 = Fault Admin; Engineer;
1 = Last Good Meas. Tech
R/O:
Operator; Auditor
QV_FAULT QV Fail Value FLOAT 0 HART Units R/W: 2.7.4.XXX ▪ Log Changes
(344) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
QV_ACTUAL_MODE QV Actual Mode ENUM16 0 Actual Mode R/O: 2.7.4.XXX Legal
0 - Live (125) Admin; Engineer;
1 - Auto Meas. Tech
2 - Auto Read Operator; Auditor
3 - Override
4 - Calibration
5 - Fault
6 - Last Good
7 - Last Hour Average
8 -Ramp to Fault Value
9 - Ramp to Last Hour Avg
QV_LIVE QV Live Val FLOAT 0 HART Units R/O: 2.7.4.XXX Legal
(344) Admin; Engineer;
Meas. Tech
Operator; Auditor
QV_OVRD QV Ovrd Val FLOAT 0 HART Units R/W: 2.7.4.XXX ▪ Log Changes
(344) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
QV_LAST_GOOD QV Lst Good FLOAT 0 HART Units R/O: 2.7.4.XXX Legal
(344) Admin; Engineer;
Meas. Tech
Operator; Auditor
QV_SELECTED QV Sel Val FLOAT 0 HART Units R/O: 2.7.4.XXX Legal
(344) Admin; Engineer;
Object Parameter Listing 487
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
HART
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
Operator; Auditor
QV_USER_MODE QV Opr Mode ENUM16 0->1 0 User Selection R/W: 2.7.4.XXX ▪ Log Changes
0 = Live (31) Admin; Engineer; ▪ Legal
1 = Override Meas. Tech
R/O:
Operator; Auditor
QV_FAULT_MODE QV Flt Mode ENUM16 0->1 0 HART Fault R/W: 2.7.4.XXX ▪ Log Changes
0 = Fault Selection (317) Admin; Engineer; ▪ Legal
1 = Last Good Meas. Tech
R/O:
Operator; Auditor
SLOT_0_ASSIGN Slot 0 Assign UINT8 0 R/W: 2.7.4.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SLOT_0_VALUE Slot 0 Value FLOAT 0 R/O: 2.7.4.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
SLOT_1_ASSIGN Slot 1 Assign UINT8 0 R/W: 2.7.4.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SLOT_1_VALUE Slot 1 Value FLOAT 0 R/O: 2.7.4.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
SLOT_2_ASSIGN Slot 2 Assign UINT8 0 R/W: 2.7.4.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
488 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
HART
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
SLOT_2_VALUE Slot 2 Value FLOAT 0 R/O: 2.7.4.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
SLOT_3_ASSIGN Slot 3 Assign UINT8 0 R/W: 2.7.4.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SLOT_3_VALUE Slot 3 Value FLOAT 0 R/O: 2.7.4.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
DEV_MESSAGE Message UC40 R/W: 2.7.4.XXX
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DESC Description UC20 R/W: 2.7.4.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
EXP_DEV_TYPE Device ID UINT16 0 R/O: 2.7.4.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
HW_SER_NUM Sensor Serial Number UINT32 0 R/O: 2.7.4.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
DEV_ID ID Number UINT32 0 R/O: 2.7.4.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
Object Parameter Listing 489
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
HART
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
TAG Device Tag UC10 R/W: 2.7.4.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
DEVICE_STATUS Device Status BIN32 0 Device R/O: 2.7.4.XXX Legal
Status(342) Admin; Engineer;
Meas. Tech
Operator; Auditor
PV_DAMPING_VALU PV Damping Value FLOAT 0 S(17-0) R/O: 2.7.4.XXX Legal
E Admin; Engineer;
Meas. Tech
Operator; Auditor
PERCENT_RANGE % of Range FLOAT %(18-0) R/O: 2.7.4.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PV_USL PV Upper Sensor Limit FLOAT R/O: 2.7.4.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PV_LSL PV Lower Sensor Limit FLOAT R/O: 2.7.4.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
LV_URL PV Upper Range Limit FLOAT R/O: 2.7.4.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PV_LRL PV Lower Range Limit FLOAT R/O: 2.7.4.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PV_MIN_SPAN PV Minimum Span FLOAT R/O: 2.7.4.XXX Legal
Admin; Engineer;
490 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
HART
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
Operator; Auditor
PV_ALM_OBJ PV Alarm Reference OBJREF R/O: 2.7.4.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
Object Parameter Listing 491
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.33 HARTChan Parameters
Description: The HARTChan object provides the parameters for configuring the individual HART Channels.
Number of Instances: 7 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-32: HARTChan Parameters
HARTChan
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.7.4.XXX ▪ Log Changes
HART Channel_X-Y Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.7.4.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.7.4.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
MOD_LOC Module Location UINT8 Varies by Instance R/O: 2.7.4.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
CHANNEL Channel UINT8 Varies by Instance R/O: 2.7.4.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
492 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
HARTChan
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
HART_MODE HART Comm Mode ENUM16 0->2 0 HART Comm R/W: 2.7.4.XXX ▪ Log Changes
0 = Disabled Mode (312) Admin; Engineer; ▪ Legal
1 = Point to Point Meas. Tech
2 = MultiDrop R/O:
Operator; Auditor
HART_MASTER HART Master Type ENUM16 01 0 HART Master R/W: 2.7.4.XXX ▪ Log Changes
0 = Primary Type (313) Admin; Engineer; ▪ Legal
1 = Secondary Meas. Tech
R/O:
Operator; Auditor
NUM_DEVICES Number of Devices UINT8 1->5 0 R/W: 2.7.4.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
HART_COM_STAT HART COMM Status ENUM16 0 HART Scan R/O: 2.7.4.XXX Legal
0 = Not Scanning Status (314) Admin; Engineer;
1 = Scanning Meas. Tech
2 = Dual Master Operator; Auditor
3 = Pass thru
4 = Burst Mode
PASS_THRU Pass Through Mode ENUM16 0->2 0 HART Passthru R/W: 2.7.4.XXX ▪ Log Changes
0 = Disable Mode (315) Admin; Engineer; ▪ Legal
1 = Strip Meas. Tech
2 = Full R/O:
Operator; Auditor
INTERNAL_RESIST Internal Resister ENUM16 0->1 1 Enable/Disable R/W: 2.7.4.XXX ▪ Log Changes
0 = Disable Selection (30) Admin; Engineer; ▪ Legal
1 = Enable Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 493
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.34 HARTSlave Parameters
Description: The HARTSlave object provides the parameters for configuring the HART slaves.
Number of Instances: 7 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-33: HARTSlave Parameters
HARTSlave
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 HART Slave R/W: Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 0 -> 5 0 R/W: Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O:
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
HART_TCP_ENABLE Enable TCP for HART ENUM16 0 -> 1 Instance: Enable/Disable R/W: Log Changes
“HARTSlave_X” Selection (30) Admin; Engineer;
(where X is instance Meas. Tech
number between 1 R/O:
and 7) Operator; Auditor
494 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
HARTSlave
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
TCPIP Port TCP/IP Port UINT16 5094 R/W: Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 495
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.35 Hist Parameters
Description: The Hist object provides the parameters for configuring the individual history points in each group.
Number of Instances: 1380 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-34: Hist Parameters
Hist
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
“Hist_X” (where X is Admin; Engineer; ▪ Legal
instance number Meas. Tech
between 1 and R/O:
21600) Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
496 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Hist
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
DESC Description UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
“Hist_X” (where X is Admin; Engineer; ▪ Legal
instance number Meas. Tech
between 1 and R/O:
21600) Operator; Auditor
HIST_GRP_OBJ History Group ObjectRef Hist Instance: R/O: 2.0.0.XXX ▪ Log Changes
Grp “Hist Grp_X” (where Admin; Engineer; ▪ Legal
X is instance Meas. Tech
number between 1 Operator; Auditor
and 27)
HIST_PARAM Parameter to Archive ParamRef Undefined R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
HIST_TYPE Archive Type ENUM16 05 Average (0) History Type R/W: 2.0.0.XXX ▪ Log Changes
0 - Average (43) Admin; Engineer; ▪ Legal
1 - Total / Difference Meas. Tech
2 - Snapshot R/O:
3 - Minimum Operator; Auditor
4 - Maximum
5 - Integration
Object Parameter Listing 497
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.36 HistConfig Parameters
Description: The HistConfig object provides the parameters for moving history points between the 25 standard
periodic groups (general history, station 1-24 history).
Number of Instances: 1 instance may exist.
Storage Location: Saved to internal configuration memory.
Table 5-35: HistConfig Parameters
HistConfig
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Hist Config R/W: 2.0.0.XXX ▪ Log Change
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Change
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech;
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 History Config R/W: 2.0.0.XXX ▪ Log Change
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
498 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
HistConfig
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
NUM_AVAIL_USER_ Total Num of Available User UINT16 030 30 R/O: 2.0.0.XXX
PTS Points Admin; Engineer;
Meas. Tech;
Operator; Auditor
NUM_AVAIL_STD_ Total Num of Available UINT16 0800 610 R/O: 2.0.0.XXX Legal
PTS Standard Points Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP1_CUR_NUM_ User Periodic1 Current Num UINT16 010 10 R/O: 2.0.0.XXX
PTS of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP2_CUR_NUM_ User Periodic2 Current Num UINT16 020 20 R/O: 2.0.0.XXX
PTS of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP3_CUR_NUM_ Standard General Current UINT16 0800 10 R/O: 2.0.0.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP3_REQ_NUM_ Standard General Requested UINT16 0800 10 R/W: 2.0.0.XXX ▪ Log Changes
PTS Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP4_CUR_NUM_ Standard Station1 Current UINT16 0800 25 R/O: 2.0.0.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP4_REQ_NUM_ Standard Station1 Requested UINT16 0800 25 R/W: 2.0.0.XXX ▪ Log Change
PTS Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 499
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
HistConfig
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
GRP5_CUR_NUM_ Standard Station2 Current UINT16 0800 25 R/O: 2.0.0.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP5_REQ_NUM_ Standard Station2 Requested UINT16 0800 25 R/W: 2.0.0.XXX ▪ Log Change
PTS Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP6_CUR_NUM_ Standard Station3 Current UINT16 0800 25 R/O: 2.0.0.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP6_REQ_NUM_ Standard Station3 Requested UINT16 0800 25 R/W: 2.0.0.XXX ▪ Log Change
PTS Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP7_CUR_NUM_ Standard Station4 Current UINT16 0800 25 R/O: 2.0.0.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP7_REQ_NUM_ Standard Station4 Requested UINT16 0800 25 R/W: 2.0.0.XXX ▪ Log Change
PTS Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP8_CUR_NUM_ Standard Station5 Current UINT16 0800 25 R/O: 2.0.0.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP8_REQ_NUM_ Standard Station5 Requested UINT16 0800 25 R/W: 2.0.0.XXX ▪ Log Change
PTS Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
500 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
HistConfig
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
GRP9_CUR_NUM_ Standard Station6 Current UINT16 0800 25 R/O: 2.0.0.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP9_REQ_NUM_ Standard Station6 Requested UINT16 0800 25 R/W: 2.0.0.XXX ▪ Log Change
PTS Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP10_CUR_NUM_ Standard Station7 Current UINT16 0800 25 R/O: 2.0.0.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP10_REQ_NUM_ Standard Station7 Requested UINT16 0800 25 R/W: 2.0.0.XXX ▪ Log Change
PTS Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP11_CUR_NUM_ Standard Station8 Current UINT16 0800 25 R/O: 2.0.0.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP11_REQ_NUM_ Standard Station8 Requested UINT16 0800 25 R/W: 2.0.0.XXX ▪ Log Change
PTS Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP12_CUR_NUM_ Standard Station9 Current UINT16 0800 25 R/O: 2.0.0.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP12_REQ_NUM_ Standard Station9 Requested UINT16 0800 25 R/W: 2.0.0.XXX ▪ Log Change
PTS Num of Pts Admin; Engineer; ▪ Legal
Object Parameter Listing 501
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
HistConfig
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
R/O:
Operator; Auditor
GRP13_CUR_NUM_ Standard Station10 Current UINT16 0800 25 R/O: 2.0.0.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP13_REQ_NUM_ Standard Station10 UINT16 0800 25 R/W: 2.0.0.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP14_CUR_NUM_ Standard Station11 Current UINT16 0800 25 R/O: 2.0.0.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP14_REQ_NUM_ Standard Station11 UINT16 0800 25 R/W: 2.0.0.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP15_CUR_NUM_ Standard Station12 Current UINT16 0800 25 R/O: 2.0.0.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP15_REQ_NUM_ Standard Station12 UINT16 0800 25 R/W: 2.0.0.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP16_CUR_NUM_ Standard Station13 Current UINT16 0800 25 R/O: 2.0.0.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
502 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
HistConfig
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
GRP16_REQ_NUM_ Standard Station13 UINT16 0800 25 R/W: 2.0.0.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP17_CUR_NUM_ Standard Station14 Current UINT16 0800 25 R/O: 2.0.0.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP17_REQ_NUM_ Standard Station14 UINT16 0800 25 R/W: 2.0.0.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP18_CUR_NUM_ Standard Station15 Current UINT16 0800 25 R/O: 2.0.0.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP18_REQ_NUM_ Standard Station15 UINT16 0800 25 R/W: 2.0.0.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP19_CUR_NUM_ Standard Station16 Current UINT16 0800 25 R/O: 2.0.0.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP19_REQ_NUM_ Standard Station16 UINT16 0800 25 R/W: 2.0.0.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP20_CUR_NUM_ Standard Station17 Current UINT16 0800 25 R/O: 2.0.0.XXX Legal
PTS Num of Pts Admin; Engineer;
Object Parameter Listing 503
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
HistConfig
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech;
Operator; Auditor
GRP20_REQ_NUM_ Standard Station17 UINT16 0800 25 R/W: 2.0.0.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP21_CUR_NUM_ Standard Station18 Current UINT16 0800 25 R/O: 2.0.0.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP21_REQ_NUM_ Standard Station18 UINT16 0800 25 R/W: 2.0.0.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP22_CUR_NUM_ Standard Station19 Current UINT16 0 -> 800 25 R/O: 2.0.0.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP22_REQ_NUM_ Standard Station19 UINT16 0800 25 R/W: 2.0.0.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP23_CUR_NUM_ Standard Station20 Current UINT16 0800 25 R/O: 2.0.0.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech
Operator; Auditor
GRP23_REQ_NUM_ Standard Station20 UINT16 0800 25 R/W: 2.0.0.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
504 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
HistConfig
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
GRP24_CUR_NUM_ Standard Station21 Current UINT16 0800 25 R/O: 2.0.0.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP24_REQ_NUM_ Standard Station21 UINT16 0800 25 R/W: 2.0.0.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP25_CUR_NUM_ Standard Station22 Current UINT16 0800 25 R/O: 2.0.0.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP25_REQ_NUM_ Standard Station22 UINT16 0800 25 R/W: 2.0.0.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP26_CUR_NUM_ Standard Station23 Current UINT16 0800 25 R/O: 2.0.0.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP26_REQ_NUM_ Standard Station23 UINT16 0800 25 R/W: 2.0.0.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP27_CUR_NUM_ Standard Station24 Current UINT16 0800 25 R/O: 2.0.0.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP27_REQ_NUM_ Standard Station24 UINT16 0800 25 R/W: 2.0.0.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
Object Parameter Listing 505
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
HistConfig
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
APPLY_CONFIG Apply Config ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX ▪ Log Change
Selection (30) Admin; Engineer; ▪ Legal
0 - Disable Meas. Tech
1 - Enable R/O:
Operator; Auditor
GRP_MAX_NUM_PT Max Num of Std Pts in Group UINT16 0800 800 R/O: 2.0.0.XXX ▪ Log Change
S Admin; Engineer; ▪ Legal
Meas. Tech;
Operator; Auditor
GRP28_CUR_NUM_ Standard Station23 Current UINT16 0800 25 R/O: 2.03.00.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP28_REQ_NUM_ Standard Station23 UINT16 0800 25 R/W: 2.03.00.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP29_CUR_NUM_ Standard Station23 Current UINT16 0800 25 R/O: 2.03.00.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP29_REQ_NUM_ Standard Station23 UINT16 0800 25 R/W: 2.03.00.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP30_CUR_NUM_ Standard Station23 Current UINT16 0800 25 R/O: 2.03.00.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP30_REQ_NUM_ Standard Station23 UINT16 0800 25 R/W: 2.03.00.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
506 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
HistConfig
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
R/O:
Operator; Auditor
GRP31_CUR_NUM_ Standard Station23 Current UINT16 0800 25 R/O: 2.03.00.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP31_REQ_NUM_ Standard Station23 UINT16 0800 25 R/W: 2.03.00.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP32_CUR_NUM_ Standard Station23 Current UINT16 0800 25 R/O: 2.03.00.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP32_REQ_NUM_ Standard Station23 UINT16 0800 25 R/W: 2.03.00.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP33_CUR_NUM_ Standard Station23 Current UINT16 0800 25 R/O: 2.03.00.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP33_REQ_NUM_ Standard Station23 UINT16 0800 25 R/W: 2.03.00.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP34_CUR_NUM_ Standard Station23 Current UINT16 0800 25 R/O: 2.03.00.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
Object Parameter Listing 507
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
HistConfig
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
GRP34_REQ_NUM_ Standard Station23 UINT16 0800 25 R/W: 2.03.00.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP35_CUR_NUM_ Standard Station23 Current UINT16 0800 25 R/O: 2.03.00.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP35_REQ_NUM_ Standard Station23 UINT16 0800 25 R/W: 2.03.00.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP36_CUR_NUM_ Standard Station23 Current UINT16 0800 25 R/O: 2.03.00.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP36_REQ_NUM_ Standard Station23 UINT16 0800 25 R/W: 2.03.00.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP37_CUR_NUM_ Standard Station23 Current UINT16 0800 25 R/O: 2.03.00.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP37_REQ_NUM_ Standard Station23 UINT16 0800 25 R/W: 2.03.00.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP38_CUR_NUM_ Standard Station23 Current UINT16 0800 25 R/O: 2.03.00.XXX Legal
PTS Num of Pts Admin; Engineer;
508 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
HistConfig
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech;
Operator; Auditor
GRP38_REQ_NUM_ Standard Station23 UINT16 0800 25 R/W: 2.03.00.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GRP39_CUR_NUM_ Standard Station23 Current UINT16 0800 25 R/O: 2.03.00.XXX Legal
PTS Num of Pts Admin; Engineer;
Meas. Tech;
Operator; Auditor
GRP39_REQ_NUM_ Standard Station23 UINT16 0800 25 R/W: 2.03.00.XXX ▪ Log Change
PTS Requested Num of Pts Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
NUM_REQ_STD_PTS Total Num of Requested UINT16 1- 610 R/W: 02.09.00.XXX ▪ Log Change
Standard Points >1350 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
NUM_CUR_PER_ Num of Current Hourly UINT16 0- 4380 R/O: 02.09.00.XXX Legal
RCD Records >26325 Admin; Engineer;
Meas. Tech;
Operator; Auditor
NUM_REQ_PER_ Num of Requested Hourly UINT16 0- 4380 R/W: 02.09.00.XXX ▪ Log Change
RCD Records >26325 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
NUM_CUR_DAY_ Num of Current Daily UINT16 0- 730 R/O: 02.09.00.XXX Legal
RCD Records >26325 Admin; Engineer;
Meas. Tech;
Operator; Auditor
Object Parameter Listing 509
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
HistConfig
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
NUM_REQ_DAY_ Num of Requested Daily UINT16 0- 730 R/W: 02.09.00.XXX ▪ Log Change
RCD Records >26325 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
NUM_CUR_WK_RCD Num of Current Weekly UINT16 0- 260 R/O: 02.09.00.XXX Legal
Records >26325 Admin; Engineer;
Meas. Tech;
Operator; Auditor
NUM_REQ_WK_RCD Num of Requested Weekly UINT16 0- 260 R/W: 02.09.00.XXX ▪ Log Change
Records >26325 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
NUM_CUR_MNTH_ Num of Current Monthly UINT16 0- 60 R/O: 02.09.00.XXX Legal
RCD Records >26325 Admin; Engineer;
Meas. Tech;
Operator; Auditor
NUM_REQ_MNTH_ Num of Requested Monthly UINT16 0- 60 R/W: 02.09.00.XXX ▪ Log Change
RCD Records >26325 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
APPLY_RESIZE Apply Resize ENUM16 0->1 Disable (0) Enable/Disable R/W: 02.09.00.XXX ▪ Log Change
Selection (30) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
APPLY_RESIZE_ Std History Resizing Status ENUM16 0->5 Apply Resize R/O: 02.09.00.XXX Legal
STATUS Values (349) Admin; Engineer;
Meas. Tech;
Operator; Auditor
510 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.37 Hist Grp Parameters
Description: The Hist Grp object provides the parameters for configuring history groups.
Number of Instances: 39 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-36: Hist Grp Parameters
Hist Grp
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
1-User Periodic 1 Admin; Engineer; ▪ Legal
2-User Periodic 2 Meas. Tech
3-General History R/O:
Instance: Operator; Auditor
“X Station (Y)
History” (where X is
instance number
between 4 and 39
and Y is number
between 1 and 24)
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
1-User Periodic 1 Admin; Engineer; ▪ Legal
Meas. Tech
Object Parameter Listing 511
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Hist Grp
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
2-User Periodic 2 R/O:
3-General History Operator; Auditor
Instance:
“X Station (Y)
History” (where X is
instance number
between 4 and 27
and Y is number
between 1 and 24)
GRP_TYPE History Group Type ENUM16 02 Instance: History Group R/O: 2.0.0.XXX Legal
0 - General History 1 - User Periodic (2) Type (84) Admin; Engineer;
1 - Meter History 2 - User Periodic (2) Meas. Tech
2 - User Periodic 3 - General History Operator; Auditor
(0)
4-27: Meter History
(1)
STATION_OBJ Station Assignment ObjectRef Station Instance: R/O: 2.0.0.XXX ▪ Log Changes
1-3: Undefined Admin; Engineer; ▪ Legal
Instance: Meas. Tech
“X Station (Y) Operator; Auditor
History” (where X is
instance number
between 4 and 27
and Y is number
between 1 and 24)
NUM_PTS Number of History Points UINT16 0800 Instance: R/O: 2.0.0.XXX Legal
1-10 Admin; Engineer;
2-20 Meas. Tech
3-10 Operator; Auditor
4-27: 25
CONTRACT_HR Contract Hour UINT8 023 0 For Instances 1-2: 2.0.0.XXX ▪ Log Changes
R/O: ▪ Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
512 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Hist Grp
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
For instances 3-27:
R/W:
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
CONTRACT_WKDAY Contract Day of Week ENUM16 06 Sunday (0) Day of Week For Instances 1-2: 2.0.0.XXX ▪ Log Changes
0 - Sunday (34) R/O: ▪ Legal
1 - Monday Admin; Engineer;
2 - Tuesday Meas. Tech
3 - Wednesday Operator; Auditor
4 - Thursday
5 - Friday For instances 3-27:
6 - Saturday R/W:
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
CONTRACT_DAY Contract Day of Month ENUM16 131 1 (1) Contract Day For instances 1-2: 2.0.0.XXX ▪ Log Changes
1-1 of Month (157) R/O: ▪ Legal
2-2 Admin; Engineer;
3-3 Meas. Tech
4-4 Operator; Auditor
5-5
6-6 For instances 3-27:
7-7 R/W:
8-8 Admin; Engineer;
9-9 Meas. Tech
10 - 10 R/O:
11 - 11 Operator; Auditor
12 - 12
13 - 13
14 - 14
15 - 15
Object Parameter Listing 513
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Hist Grp
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
16 - 16
17 - 17
18 - 18
19 - 19
20 - 20
21 - 21
22 - 22
23 - 23
24 - 24
25 - 25
26 - 26
27 - 27
28 - 28
29 - 3rd from Last Day of
Month
30 - 2nd to Last Day of
Month
31 - Last Day of Month
USER_PERIOD User Period UINT32 1 60 s (17-0) Flr instances 1-2: 2.0.0.XXX Log Changes
720000 R/W:
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
For instances 3-27:
R/O:
Admin; Engineer;
Meas. Tech;
Operator; Auditor
PER_OPT Hourly History Option ENUM16 01 Enable (1) Enable/Disable For instances 1-2: 2.0.0.XXX ▪ Log Changes
0 - Disable Selection (30) R/O: ▪ Legal
1 - Enable Admin; Engineer;
Meas. Tech;
Operator; Auditor
514 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Hist Grp
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
For instances 3-27:
R/W:
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DAY_OPT Daily History Option ENUM16 01 Enable (1) Enable/Disable For instances 1-2: 2.0.0.XXX ▪ Log Changes
0 - Disable Selection (30) R/O: ▪ Legal
1 - Enable Admin; Engineer;
Meas. Tech;
Operator; Auditor
For instances 3-27:
R/W:
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
WK_OPT Weekly History Option ENUM16 01 Enable (1) Enable/Disable For instances 1-2: 2.0.0.XXX ▪ Log Changes
0 - Disable Selection (30) R/O: ▪ Legal
1 - Enable Admin; Engineer;
Meas. Tech;
Operator; Auditor
For instances 3-27:
R/W:
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
MNTH_OPT Monthly History Option ENUM16 01 Enable (1) Enable/Disable For instances 1-2: 2.0.0.XXX ▪ Log Changes
0 - Disable Selection (30) R/O: ▪ Legal
1 - Enable Admin; Engineer;
Object Parameter Listing 515
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Hist Grp
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech;
Operator; Auditor
For instances 3-27:
R/W:
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
PER_LOG_OBJ Hourly Log ObjectRef Varies by instance R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
DAY_LOG_OBJ Daily Log ObjectRef Varies by instance R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
WK_LOG_OBJ Weekly Log ObjectRef Varies by instance R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
MNTH_LOG_OBJ Monthly Log ObjectRef Varies by instance R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
USER_LOG_OBJ User Periodic Log ObjectRef Instance: R/O: 2.0.0.XXX
1-Log_5 Admin; Engineer;
2-Log_6 Meas. Tech
3-27: Undefined Operator; Auditor
START_HIST_OBJ Start History Object ObjectRef Hist Varies by instance R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
516 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Hist Grp
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
CONFIG_CHNG_ Config change counter UINT8 0 R/O: 2.0.0.XXX Legal
CNTR Admin; Engineer;
Meas. Tech
Operator; Auditor
Object Parameter Listing 517
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.38 HostLink Parameters
Description: The HostLink object allows for the configuration of DNP3 hosts that need to receive DNP3 events.
Number of Instances: 10 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-37: HostLink Parameters
HostLink
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Host Link R/W: 2.8.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 0→5 0 R/W: 2.8.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status: BIN32 Normal Object Status R/O: 2.8.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
ASSIGN_PORT Port to retrieve events OBJREF R/W: 2.8.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
IP_ADDR IP address of host ByteArray IPv4 Address R/W: 2.8.0.XXX Log Changes
4 (41) Admin; Engineer;
Meas. Tech
R/O:
518 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
HostLink
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Operator; Auditor
SA_ENABLE DNP3 Secure Authentication ENUM16 0->1 1 Enable/Disable R/W: 2.12.0.XXX Log Changes
Enable Selection (30) Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 519
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.39 IoConfig Parameters
Description: The IoConfig object provides the parameters for configuring Input and output types.
Number of Instances: 31 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-38: IoConfig Parameters
IO Config
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
“IoConfig_X” (where Admin; Engineer; ▪ Legal
X is instance Meas. Tech
number between 2 R/O:
and 8) Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech;
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
MOD_LOC Module Location UINT8 Instance: R/O: 2.0.0.XXX Legal
2-2 Admin; Engineer;
3-3 Meas. Tech;
4-4 Operator; Auditor
5-5
6-6
7-7
8-8
520 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
IO Config
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
DESC Description UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
“Slot_X” (where X is Admin; Engineer; ▪ Legal
instance number Meas. Tech
between 2 and 8) R/O:
Operator; Auditor
DB_CHANGE Change in Progress ENUM16 Inactive (0) Action Block R/O: 2.0.0.XXX Legal
0 - Inactive Status (166) Admin; Engineer;
1 - Active Meas. Tech;
Operator; Auditor
INSTALLED Installed ENUM16 No (0) Yes/No Option R/O: 2.0.0.XXX Legal
0 - No (208) Admin; Engineer;
1 - Yes Meas. Tech;
Operator; Auditor
LICENSED Module Licensed ENUM16 No (0) Yes/No Option R/O: 2.0.0.XXX Legal
0 - No (208) Admin; Engineer;
1 - Yes Meas. Tech;
Operator; Auditor
MODULE_MODE Module Mode ENUM16 Not Installed (0) Module Mode R/O: 2.0.0.XXX Legal
0 - Not Installed (143) Admin; Engineer;
1 - Boot Meas. Tech;
2 - Normal Operator; Auditor
3 - Not Licensed
4 - Communication Failure
5 - Module Failure
6 - Power Off
7 - Termination Missing
8 – Firmware Mismatch
9 – Module Mismatch
MODULE_TYPE Module Type ENUM16 None (0) Module R/O: 2.0.0.XXX Legal
0 - None Subtype (210) Admin; Engineer;
1 - 8AIDIPI 2AO 2DO Meas. Tech;
4 – 8AODO Operator; Auditor
49 – HART 4
CONFIG_TYPE Sensor Type ENUM16 050 None (0) Module R/W: 2.0.0.XXX ▪ Log Changes
0 - None Subtype (210) Admin; Engineer; ▪ Legal
Object Parameter Listing 521
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
IO Config
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
1 - 8AIDIPI 2AO 2DO Meas. Tech ▪ Verified
4 – 8AODO R/O:
Operator; Auditor
IO_LOOP_POWER IO Loop Power Control ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX ▪ Log Changes
0 - Disable Selection (30) Admin; Engineer; ▪ Legal
1 - Enable Meas. Tech ▪ Verified
R/O:
Operator; Auditor
NUM_CHANNELS Number of Channels UINT8 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
NUM_GOOD_MSG Number of Good Messages UINT32 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
NUM_BAD_MSG Number of Bad Messages UINT32 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
RESET_MSG_COUN Reset Message Counters ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX ▪ Log Changes
T 0 - Disable Selection (30) Admin; Engineer; ▪ Legal
1 - Enable Meas. Tech ▪ Verified
R/O:
Operator; Auditor
5.40 LCDDisplay Parameters
Description: The LCDDisplay object provides the parameters for Lcd display.
Number of Instances: 1 instance may exist
Storage Location: Saved to internal configuration memory.
522 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Table 5-39: LCDDisplay Parameters
LCDDisplay
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Device LCD R/W: 2.17.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.17.0.XXX ▪ Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.17.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 Device LCD R/W: 2.17.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
MOD_MODE Module Mode ENUM16 Module Mode R/W: 2.17.0.XXX ▪ Legal
(143) Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
APP_DESC Firmware Description UC20 R/W: 2.17.0.XXX ▪ Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
APP_SER_NUM Firmware Serial Number UC30 R/W: 2.17.0.XXX ▪ Legal
Admin; Engineer;
Meas. Tech
Object Parameter Listing 523
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
LCDDisplay
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
APP_PART_NUM Firmware Part Number UC20 R/W: 2.17.0.XXX ▪ Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
APP_VER Firmware Version R/W: 2.17.0.XXX ▪ Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
APP_DATE Firmware Creation Date UC20 R/W: 2.17.0.XXX ▪ Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
BOOT_PART_NUM Boot Part Number UC20 R/W: 2.17.0.XXX ▪ Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
BOOT_VER Boot Version UC10 R/W: 2.17.0.XXX ▪ Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
BOOT_DATE Boot Creation Date UC20 R/W: 2.17.0.XXX ▪ Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
LIST_MODE List Mode Status ENUM16 0 -> 1 0 Enable/Disable R/W: 2.17.0.XXX ▪ Legal
Selection (30) Admin; Engineer;
Meas. Tech
524 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
LCDDisplay
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
LM_SCROLLTIME List Mode Scroll Time UINT8 1 -> 255 4 R/W: 2.17.0.XXX ▪ Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
LM_INACTVTIME List Mode Inactivity Time UINT8 10 -> 255 10 R/W: 2.17.0.XXX ▪ Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
PWR_SAVE_MODE Power Save Mode ENUM16 0 -> 1 Enable/Disable R/W: 2.17.0.XXX ▪ Legal
Selection (30) Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 525
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.41 Linear Meter Parameters
Description: The Linear Meter object provides the parameters for configuring linear meters.
Number of Instances: 36 instances may exist (varies with license installed and number of configured meters)
Storage Location: Saved to internal configuration memory.
Table 5-40: Linear Meter Parameters
Linear Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
“Linear Mtr_X” Admin; Engineer; ▪ Legal
(where X is Meas. Tech
instance number R/O:
between 1 and 36) Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 Undefined R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
STATION_OBJ Station Assignment ObjectRef Station Station_1 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
526 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Linear Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
FLUID_PROP_OBJ Fluid Properties Reference ObjectRef Fluid Instance: R/O: 2.0.0.XXX ▪ Log Changes
Prop “Fluid Prop_X” Admin; Engineer; ▪ Legal
(where X is Meas. Tech
instance number Operator; Auditor
between 101 and
124)
MTR_TYPE Meter Type ENUM16 02 Turbine (0) Linear Meter R/W: 2.0.0.XXX ▪ Log Changes
0 - Turbine Type (53) Admin; Engineer; ▪ Legal
1 - Coriolis Meas. Tech
2 - Auto-Adjust R/O:
Operator; Auditor
SER_NUM Serial Number UC20 Undefined R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
PRESS_TYPE Pressure Transmitter Type ENUM16 01 Absolute (1) SP Type R/W: 2.0.0.XXX ▪ Log Changes
0 - Gauge Selection (57) Admin; Engineer; ▪ Legal
1 - Absolute Meas. Tech
R/O:
Operator; Auditor
NO_FLOW_TIME No Flow Time DOUBLE 1 1 s (17-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
NO_FLOW_LIM No Flow Cut-off Limit DOUBLE 0 0 Hz (24-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 527
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Linear Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
NO_FLOW_OPT No Flow Option ENUM16 01 Time Between No Flow R/W: 2.0.0.XXX ▪ Log Changes
0 - Time Between Pulses Pulses (0) Option (238) Admin; Engineer; ▪ Legal
1 - Flow Cut-off Meas. Tech
R/O:
Operator; Auditor
NO_FLOW_STATUS No Flow Status ENUM16 Not Flowing (0) No Flow Status R/O: 2.0.0.XXX Legal
0 - Not Flowing (239) Admin; Engineer;
1 - Flowing Meas. Tech
Operator; Auditor
FLOW_OBJ Indicated Flow ObjectRef Instance: R/W: ▪ Log Changes
1-24: Undefined Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FLOW_SEC_OBJ Secondary Flow Input Object ObjectRef PI Instance: R/W: 2.0.0.XXX ▪ Log Changes
1-24: Undefined Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
PF_OBJ Static Pressure Object ObjectRef Instance: R/W: 2.0.0.XXX ▪ Log Changes
1-24: Undefined Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
TF_OBJ Flowing Temperature Object ObjectRef Instance: R/W: 2.0.0.XXX ▪ Log Changes
1-24: Undefined Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
PF_INUSE Flowing Pressure In Use DOUBLE 0 psi(a) (2-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
TF_INUSE Flowing Temperature In Use DOUBLE 0 °F (3-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
528 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Linear Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
Operator; Auditor
FREQ_INUSE Frequency In Use DOUBLE 0 Hz (24-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
FLW_ALM_OBJ Flow Alarm Object ObjectRef Alarm Instance: R/O: 2.0.0.XXX Legal
“Alarm_X” (where Admin; Engineer;
X is instance Meas. Tech
number between Operator; Auditor
101 and 124)
FCALC_ALM Flow Calculation Alarm Code BIN32 Normal Linear Flow R/O: 2.0.0.XXX Legal
0 - Normal Calculation Admin; Engineer;
1 - Invalid Input(s) Alarm (264) Meas. Tech
2 - Invalid Configuration Operator; Auditor
3 - Calculation Error
4 - Boundary Error
5 - Invalid Station
Assignment
6-8 - RESERVED
9 - Flow
10 - Pressure
11 - Temperature
12 - Flowing
Density/Compressibility
13 - Base
Density/Compressibility
14 - Relative Density
15 - Heating Value/Enthalpy
16 - Viscosity
17 - User Correction Factor
18 - Total/Increment
19 - Integral Multiplier Value
20-25 - RESERVED
26 - K-factor/Meter Factor
Object Parameter Listing 529
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Linear Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
27 - Mass Pressure
Correction Factor
IMV_SEL Integral Multiplier Value DOUBLE 1 R/O: 2.0.0.XXX Legal
(IMV/C-Factor) Admin; Engineer;
Meas. Tech
Operator; Auditor
FACTOR_CURVE_ Meter Factor / K-factor Curve ENUM16 02 Single Meter Factor Curve R/W: 2.0.0.XXX ▪ Log Changes
OPT Option Factor / Single K- Option (183) Admin; Engineer; ▪ Legal
0 - Single Meter Factor / factor (0) Meas. Tech
Single K-factor R/O:
1 - Meter Factor Curve / Operator; Auditor
Single K-factor
2 - Single Meter Factor / K-
factor Curve
MF_OVRD Override Meter Factor DOUBLE 1 R/W: 2.0.0.XXX ▪ Log Changes
0.000001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
MF_CALC Calculated Meter Factor DOUBLE 0 1 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
MF_SEL Selected Meter Factor DOUBLE 0 1 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
MF_UMODE Meter Factor Mode ENUM16 12 Override (1) User Mode R/W: 2.0.0.XXX ▪ Log Changes
1 - Override Selection 2 (97) Admin; Engineer; ▪ Legal
2 - Calculated Meas. Tech
R/O:
Operator; Auditor
KF_OVRD Override K-factor DOUBLE 1 pulses/ft³ R/W: 2.0.0.XXX ▪ Log Changes
0.000001 (27-0) Admin; Engineer; ▪ Legal
Meas. Tech
530 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Linear Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
KF_CALC Calculated K-factor DOUBLE 0 1 pulses/ft³ R/O: 2.0.0.XXX Legal
(27-0) Admin; Engineer;
Meas. Tech
Operator; Auditor
KF_SEL Selected K-factor DOUBLE 0 1 pulses/ft³ R/O: 2.0.0.XXX Legal
(27-0) Admin; Engineer;
Meas. Tech
Operator; Auditor
KF_UMODE K-Factor Mode ENUM16 12 Override (1) User Mode R/W: 2.0.0.XXX ▪ Log Changes
1 - Override Selection 2 (97) Admin; Engineer; ▪ Legal
2 - Calculated Meas. Tech
R/O:
Operator; Auditor
USER_CORR_ User Correction Factor DOUBLE 0 1 R/W: 2.0.0.XXX ▪ Log Changes
FACTOR Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
IQ_RATE Indicated Quantity Flow Rate DOUBLE 0 MCF/d (12-7) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
UVOL_RATE Uncorrected Volume Flow DOUBLE 0 MCF/d (12-7) R/O: 2.0.0.XXX Legal
Rate Admin; Engineer;
Meas. Tech
Operator; Auditor
SVOL_RATE Corrected Volume Flow Rate DOUBLE 0 MCF/d (12-7) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
MASS_RATE Mass Flow Rate DOUBLE 0 Mlb/d (13-7) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Object Parameter Listing 531
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Linear Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
Operator; Auditor
ENERGY_RATE Energy Flow Rate DOUBLE 0 MMBtu/d R/O: 2.0.0.XXX Legal
(14-7) Admin; Engineer;
Meas. Tech
Operator; Auditor
UVOL_RAW_TOT Uncorrected Volume Total DOUBLE 0 MCF (9-2) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
SVOL_RAW_TOT Corrected Volume Total DOUBLE 0 MCF (9-2) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
MASS_RAW_TOT Mass Total DOUBLE 0 Mlb (10-2) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
ENERGY_RAW_TOT Energy Total DOUBLE 0 MMBtu (11-1) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
FLWTM_RAW_TOT Flow Time Total DOUBLE 0 s (359-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PULSE_RAW_TOT Pulse Total DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
UVOL_TOT_OBJ Uncorrected Volume Total ObjectRef Total Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Object Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
532 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Linear Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
SVOL_TOT_OBJ Corrected Volume Total ObjectRef Total Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Object Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
MASS_TOT_OBJ Mass Total Object ObjectRef Total Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
ENERGY_TOT_OBJ Energy Total Object ObjectRef Total Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FLWTM_TOT_OBJ Flow Time Total Object ObjectRef Total Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
PULSE_TOT_OBJ Pulse Total Object ObjectRef Total Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
PRESS_MULT Pressure Multiplier DOUBLE 1 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
TEMP_MULT Temperature Multiplier DOUBLE 1 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
COMP_MULT Compressibility Multiplier DOUBLE 1 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Object Parameter Listing 533
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Linear Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
Operator; Auditor
FACTOR_1 K-factor/MF 1 DOUBLE 100 1 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_1_FLOW Frequency/Flowrate 1 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_2 K-factor/MF 2 DOUBLE 100 1 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_2_FLOW Frequency/Flowrate 2 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_3 K-factor/MF 3 DOUBLE 100 1 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_3_FLOW Frequency/Flowrate 3 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_4 K-factor/MF 4 DOUBLE 100 1 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
534 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Linear Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
FACTOR_4_FLOW Frequency/Flowrate 4 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_5 K-factor/MF 5 DOUBLE 100 1 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_5_FLOW Frequency/Flowrate 5 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_6 K-factor/MF 6 DOUBLE 100 1 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_6_FLOW Frequency/Flowrate 6 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_7 K-factor/MF 7 DOUBLE 100 1 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_7_FLOW Frequency/Flowrate 7 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Object Parameter Listing 535
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Linear Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
FACTOR_8 K-factor/MF 8 DOUBLE 100 1 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_8_FLOW Frequency/Flowrate 8 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_9 K-factor/MF 9 DOUBLE 100 1 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_9_FLOW Frequency/Flowrate 9 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_10 K-factor/MF 10 DOUBLE 100 1 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_10_FLOW Frequency/Flowrate 10 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_11 K-factor/MF 11 DOUBLE 100 1 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
536 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Linear Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
FACTOR_11_FLOW Frequency/Flowrate 11 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_12 K-factor/MF 12 DOUBLE 100 1 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_12_FLOW Frequency/Flowrate 12 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_13 K-factor/MF 13 DOUBLE 100 1 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_13_FLOW Frequency/Flowrate 13 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_14 K-factor/MF 14 DOUBLE 100 1 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_14_FLOW Frequency/Flowrate 14 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Object Parameter Listing 537
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Linear Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
FACTOR_15 K-factor/MF 15 DOUBLE 100 1 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_15_FLOW Frequency/Flowrate 15 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_16 K-factor/MF 16 DOUBLE 100 1 R/W: ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_16_FLOW Frequency/Flowrate 16 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_17 K-factor/MF 17 DOUBLE 100 1 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_17_FLOW Frequency/Flowrate 17 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_18 K-factor/MF 18 DOUBLE 100 1 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
538 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Linear Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
FACTOR_18_FLOW Frequency/Flowrate 18 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_19 K-factor/MF 19 DOUBLE 100 1 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_19_FLOW Frequency/Flowrate 19 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_20 K-factor/MF 20 DOUBLE 100 1 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_20_FLOW Frequency/Flowrate 20 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
MASS_CORR_PF_ Mass Pressure Effect Option ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX ▪ Log Changes
OPT 0 - Disable Selection (30) Admin; Engineer; ▪ Legal
1 - Enable Meas. Tech
R/O:
Operator; Auditor
PCAL Calibration Pressure DOUBLE 0 psi(g) (29-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Object Parameter Listing 539
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Linear Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
MASS_CORR_PF_ Mass Pressure Effect DOUBLE 0 -0.0002 %/psi (247-0) R/W: 2.0.0.XXX ▪ Log Changes
COEFF Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
AA_CAL_MODE_ENB Auto Adjust Calibration ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX ▪ Log Changes
Mode Enable Selection (30) Admin; Engineer; ▪ Legal
0 - Disable Meas. Tech
1 - Enable R/O:
Operator; Auditor
AA_VOL_RATE_ Auto Adjust Mechanical Rate DOUBLE 0 MCF/d (12-7) R/O: 2.0.0.XXX Legal
MECH Admin; Engineer;
Meas. Tech
Operator; Auditor
AA_KF_MECH Auto Adjust Mechanical K- DOUBLE 1 pulses/ft³ R/W: 2.0.0.XXX ▪ Log Changes
factor 0.000001 (27-0) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
AA_KF_MAIN Auto Adjust Main Rotor K- DOUBLE 1 pulses/ft³ R/W: 2.0.0.XXX ▪ Log Changes
factor 0.000001 (27-0) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
AA_KF_SENS Auto Adjust Sensing Rotor K- DOUBLE 1 pulses/ft³ R/W: 2.0.0.XXX ▪ Log Changes
factor 0.000001 (27-0) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
AA_RESET_ALG Auto Adjust Algorithm Reset ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX ▪ Log Changes
Enable Selection (30) Admin; Engineer; ▪ Legal
0 - Disable Meas. Tech
1 - Enable
540 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Linear Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
PIPE_DIAM Pipe Diameter DOUBLE 8 in (7-0) R/W: 2.0.0.XXX ▪ Log Changes
0.000001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
AA_AVG_REL_ADJ Auto Adjust Relative DOUBLE 0100 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Adjustment Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
AA_MAX_FREQ Auto Adjust Maximum DOUBLE 1000 Hz (24-0) R/W: 2.0.0.XXX ▪ Log Changes
Frequency 0.000001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
AA_DELTA_A_BASE Auto Adjust Base Delta A DOUBLE 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
AA_DELTA_A_CALC Auto Adjust Calculated Delta DOUBLE 0 % (18-0) R/O: 2.0.0.XXX Legal
A Admin; Engineer;
Meas. Tech
Operator; Auditor
AA_NORMAL_BAND Auto Adjust Normal Band DOUBLE 0100 0.2 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
AA_ABNORMAL_ Auto Adjust Abnormal Band DOUBLE 0100 0.3 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
BAND Admin; Engineer; ▪ Legal
Meas. Tech
Object Parameter Listing 541
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Linear Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
AA_LOAD_CALC Auto Adjust Calculated Load DOUBLE 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
AA_BLADE_FACTOR Auto Adjust Blade Factor DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
AA_TEST_TIMER Auto Adjust Test Timer DOUBLE 0 s (17-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
AA_TEST_PULSE_ Auto Adjust Pulse Accum DOUBLE 0 Pulses (141-0) R/O: 2.0.0.XXX Legal
ACCUM Admin; Engineer;
Meas. Tech
Operator; Auditor
AA_TEST_FREQ_ Auto Adjust Main Rotor DOUBLE 0 Hz (24-0) R/O: 2.0.0.XXX Legal
MAIN Frequency Admin; Engineer;
Meas. Tech
Operator; Auditor
AA_TEST_FREQ_ Auto Adjust Sensing Rotor DOUBLE 0 Hz (24-0) R/O: 2.0.0.XXX Legal
SENS Frequency Admin; Engineer;
Meas. Tech
Operator; Auditor
AA_TEST_RATE_ Auto Adjust Main Rotor Test DOUBLE 0 ft³/s (12-0) R/O: 2.0.0.XXX Legal
MAIN Flowrate Admin; Engineer;
Meas. Tech
Operator; Auditor
AA_TEST_RATE_ Auto Adjust Sensing Rotor DOUBLE 0 ft³/s (12-0) R/O: 2.0.0.XXX Legal
SENS Test Flowrate Admin; Engineer;
Meas. Tech
Operator; Auditor
542 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Linear Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
AA_TEST_ACCUM_ Auto Adjust Main Rotor Test DOUBLE 0 ft³ (9-0) R/O: 2.0.0.XXX Legal
MAIN Accum Admin; Engineer;
Meas. Tech
Operator; Auditor
AA_TEST_ACCUM_ Auto Adjust Sensing Rotor DOUBLE 0 ft³ (9-0) R/O: 2.0.0.XXX Legal
SENS Test Accum Admin; Engineer;
Meas. Tech
Operator; Auditor
AA_INITIAL_CYCLE Auto Adjust Initial Cycle ENUM16 Initial Cycle In Auto Adjust R/O: 2.0.0.XXX Legal
Status Progress (1) Initial Cycle Admin; Engineer;
0 - Initial Cycle Complete (227) Meas. Tech
1 - Initial Cycle In Progress Operator; Auditor
AA_SYSTEM_ALARM Auto Adjust System Alarm ENUM16 Normal Flow (0) Auto Adjust R/O: 2.0.0.XXX Legal
0 - Normal Flow System Alarm Admin; Engineer;
1 - No Flow / Loss of Both (228) Meas. Tech
Pulses Operator; Auditor
2 - Leakage or Resonant No-
Net Flow
3 - No Main Rotor Pulses
4 - No Sensing Rotor Pulses
AA_FLOW_ALARM Auto Adjust Flow Alarm ENUM16 Normal Flow (0) Auto Adjust R/O: 2.0.0.XXX Legal
0 - Normal Flow Flow Alarm Admin; Engineer;
1 - Non-steady Flow (229) Meas. Tech
Operator; Auditor
AA_DELTA_A_ Auto Adjust Delta A Alarm ENUM16 Normal (0) Auto Adjust R/O: 2.0.0.XXX Legal
ALARM 0 - Normal Delta A Alarm Admin; Engineer;
1 - Low Warning (230) Meas. Tech
2 - High Warning Operator; Auditor
3 - Low Alarm
4 - High Alarm
AA_ALARM_LOG_ Auto-Adjust Alarm Log ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX ▪ Log Changes
OPT Option Selection (30) Admin; Engineer; ▪ Legal
0 - Disable Meas. Tech
1 - Enable R/O:
Operator; Auditor
Object Parameter Listing 543
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Linear Meter
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
UVOL_FLT_TOT_OBJ Uncorrected Volume Fault ObjectRef Total Varies by instance R/W: 2.9.0.XXX ▪ Log Changes
Total Object Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
SVOL_FLT_TOT_OBJ Corrected Volume Fault Total ObjectRef Total Varies by instance R/W: 2.9.0.XXX ▪ Log Changes
Object Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
MASS_FLT_TOT_OBJ Mass Fault Total Object ObjectRef Total Varies by instance R/W: 2.9.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
ENERGY_FLT_TOT_ Energy Fault Total Object ObjectRef Total Varies by instance R/W: 2.9.0.XXX ▪ Log Changes
OBJ Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
PF_INUSE_G Flowing Pressure In Use DOUBLE Gauge R/W: 2.17.0.XX ▪ Legal
(Gauge) Pressure (29) Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
544 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.42 Liq Dens Parameters
Description: The Liq Dens object provides the parameters for configuring liquid density properties.
Number of Instances: 12 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-41: Liq Dens Parameters
Liq Dens
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.5.0.XXX Log Changes
“Liq Dens_X” (where Admin; Engineer;
X is instance Meas. Tech
number between 1 R/O:
and 36) Operator; Auditor
OBJ_AREA Area Assignment UINT8 0 -> 5 0 R/W: 2.5.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.5.0.XXX
(80) Admin; Engineer;
Meas. Tech
Operator; Auditor
DESC Description UC20 R/W: 2.5.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DENS_PARAM Density Parameter ParamRef Undefined R/W: 2.5.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 545
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq Dens
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
TD_PARAM Density Temperature ParamRef Undefined R/W: 2.5.0.XXX Log Changes
Parameter Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
PD_PARAM Density Pressure Parameter ParamRef Undefined R/W: 2.5.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DENS_FACTOR Density Correction Factor Double 0 1 R/W: 2.5.0.XXX ▪ Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
546 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.43 Liq FlProp Parameters
Description: The Liq FlProp object provides the parameters for liquid fluid properties.
Number of Instances: 36 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-42: Liq FlProp Parameters
Liq FlProp
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
“Liq FlProp_X” Admin; Engineer; ▪ Legal
(where X is instance Meas. Tech
number between 1 R/O:
and 36) Operator; Auditor
OBJ_AREA Area Assignment UINT8 15 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
WC_METHOD Water Cut Method ENUM16 01 Dynamic (0) Water Cut R/W: 2.0.0.XXX ▪ Log Changes
0 - Dynamic Method (283) Admin; Engineer; ▪ Legal
1 - Static Meas. Tech
Object Parameter Listing 547
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq FlProp
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
WC_T_OVRD Static Water Cut DOUBLE 68 °F (3-0) R/W: 2.0.0.XXX ▪ Log Changes
Temperature Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
WC_LAB Static Water Cut DOUBLE 0 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
DENSB_W_PARAM Water Base Density ParamRef Undefined R/W: 2.0.0.XXX Legal
Parameter Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DENSB_W_OVRD Override Water Base Density DOUBLE 0 1 g/cc (295-2) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
DENSB_W_UMODE Water Base Density Mode ENUM16 01 Override (1) User Mode R/W: 2.0.0.XXX ▪ Log Changes
0 - Measured Selection 5 Admin; Engineer; ▪ Legal
1 - Override (285) Meas. Tech
R/O:
Operator; Auditor
DENSB_W_SEL Selected Water Base Density DOUBLE 1 g/cc (295-2) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
DENSB_O_PARAM Oil Base Density Parameter ParamRef Undefined R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
548 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq FlProp
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
DENSB_O_OVRD Override Oil Base Density DOUBLE 0 30 °API (294-8) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
DENSB_O_CALC Calculated Oil Base Density DOUBLE 0 °API (294-8) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
DENSB_O_UMODE Oil Base Density Mode ENUM16 01 Override (1) User Mode R/W: 2.0.0.XXX ▪ Log Changes
0 - Measured Selection 5 Admin; Engineer; ▪ Legal
1 - Override (285) Meas. Tech
R/O:
Operator; Auditor
DENSB_O_SEL Selected Oil Base Density DOUBLE 0 °API (294-8) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
DENSF_PARAM Flowing Density Parameter ParamRef Undefined R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DENSF_OVRD Override Flowing Density DOUBLE 0 0.0001 API (294-8) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
DENSF_UMODE Flowing Density Mode ENUM16 01 Override (1) User Mode R/W: 2.0.0.XXX ▪ Log Changes
0 - Measured Selection 5 Admin; Engineer; ▪ Legal
1 - Override (285) Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 549
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq FlProp
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
DENSF_SEL Selected Flowing Density DOUBLE 0.0001 API (294-8) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
WC_PARAM Water Cut Parameter ParamRef Undefined R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
WC_OVRD Water Cut Override DOUBLE 0 0 % (18-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
WC_UMODE Water Cut Mode ENUM16 01 Override (1) User Mode R/W: 2.0.0.XXX ▪ Log Changes
0 - Measured Selection 5 Admin; Engineer; ▪ Legal
1 - Override (285) Meas. Tech
R/O:
Operator; Auditor
WC_SEL Selected Water Cut DOUBLE 0 % (18-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
WC_FRAC_INUSE Water Cut at Metering DOUBLE 0 R/O: 2.0.0.XXX Legal
Conditions Admin; Engineer;
Meas. Tech
Operator; Auditor
SF_PARAM Shrinkage Factor Parameter ParamRef Undefined R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SF_OVRD Override Shrinkage Factor DOUBLE 0 1 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
550 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq FlProp
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
SF_UMODE Shrinkage Factor Mode ENUM16 01 Override (1) User Mode R/W: 2.0.0.XXX ▪ Log Changes
0 - Measured Selection 5 Admin; Engineer; ▪ Legal
1 - Override (285) Meas. Tech
R/O:
Operator; Auditor
SF_SEL Selected Shrinkage Factor DOUBLE 1 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
NGLF_PARAM NGL Factor Parameter ParamRef Undefined R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
NGLF_OVRD Override NGL Factor DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
NGLF_UMODE NGL Factor Mode ENUM16 01 Override (1) User Mode R/W: 2.0.0.XXX ▪ Log Changes
0 - Measured Selection 5 Admin; Engineer; ▪ Legal
1 - Override (285) Meas. Tech
R/O:
Operator; Auditor
NGLF_SEL Selected NGL Factor DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
GASF_PARAM Flash Gas Factor Parameter ParamRef Undefined R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 551
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq FlProp
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
GASF_OVRD Override Flash Gas Factor DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
GASF_UMODE Flash Gas Factor Mode ENUM16 01 Override (1) User Mode R/W: 2.0.0.XXX ▪ Log Changes
0 - Measured Selection 5 Admin; Engineer; ▪ Legal
1 - Override (285) Meas. Tech
R/O:
Operator; Auditor
GASF_SEL Selected Flash Gas Factor DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
PCALC_ALM Property Calculation Alarm BIN32 Liq LinMtr R/O: 2.0.0.XXX Legal
Code Property Admin; Engineer;
0 - Undefined Calculation Meas. Tech;
1 - Invalid Input(s) Alarm (282) Operator; Auditor
2 - Invalid Configuration
3 - Calculation Error
4 - Boundary Error
9 - Pressure
10 - Temperature
12 - Base
Density/Compressibility
13-16: Undefined
17 - Atmospheric
Press/Gravitational Accel
DENSF_CALC Calcuated Flowing Density DOUBLE 0 API (294-8) R/O: 2.3.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PE_INUSE Equilibrium Pressure In Use DOUBLE psi(a) (2) R/O: 2.8.0.XXX Legal
(Absolute) Admin; Engineer;
552 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq FlProp
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
Operator; Auditor
FP_INUSE Compressibility Factor In Use DOUBLE 1/psi (357) R/O: 2.8.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
Object Parameter Listing 553
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.44 Liq LinMtr Parameters
Description: The Liq LnMtr object provides the parameters for configuring liquid linear meters.
Number of Instances: 36 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-43: Liq LinMtr Parameters
Liq LinMtr
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
“Liq LinMtr_X” Admin; Engineer; ▪ Legal
(where X is Meas. Tech
instance number R/O:
between 1 and Operator; Auditor
36)
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 Undefined R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
STATION_OBJ Station Assignment ObjectRef Station Station_1 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
554 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq LinMtr
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
FLUID_PROP_OBJ Fluid Properties Reference ObjectRef Liq FlProp Instance: R/O: 2.0.0.XXX ▪ Log Changes
“Liq FlProp_X” Admin; Engineer; ▪ Legal
(where X is Meas. Tech
instance number Operator; Auditor
between 1 and
36)
MTR_TYPE Meter Type ENUM16 01 Turbine (0) Liq LinMtr R/W: 2.0.0.XXX ▪ Log Changes
0 - Turbine Linear Meter Admin; Engineer; ▪ Legal
1 - Coriolis Type (279) Meas. Tech
R/O:
Operator; Auditor
SER_NUM Serial Number UC20 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
PRESS_TYPE Pressure Transmitter Type ENUM16 01 Absolute (1) SP Type R/W: 2.0.0.XXX ▪ Log Changes
0 - Gauge Selection (57) Admin; Engineer; ▪ Legal
1 - Absolute Meas. Tech
R/O:
Operator; Auditor
NO_FLOW_TIME No Flow Time DOUBLE 1 1 s (17-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
NO_FLOW_LIM No Flow Cut-off Limit DOUBLE 0 0 Hz (24-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 555
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq LinMtr
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
NO_FLOW_OPT No Flow Option ENUM16 02 Time Between No Flow R/W: 2.0.0.XXX ▪ Log Changes
0 - Time Between Pulses Pulses (0) Option (238) Admin; Engineer; ▪ Legal
1 - Flow Cut-off Meas. Tech
2- Flow Cut-off with R/O:
accumulation Operator; Auditor
NO_FLOW_STATUS No Flow Status ENUM16 Not Flowing (0) No Flow Status R/O: 2.0.0.XXX Legal
0 - Not Flowing (239) Admin; Engineer;
1 - Flowing Meas. Tech
Operator; Auditor
RATE_PARAM Flow Rate Parameter ParamRef Undefined R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
PF_OBJ Static Pressure Object ObjectRef Undefined R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
TF_OBJ Flowing Temperature Object ObjectRef Undefined R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FREQ_INUSE Frequency In Use DOUBLE 0 Hz (24-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PF_INUSE Flowing Pressure In Use DOUBLE 0 psi(a) (2-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
556 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq LinMtr
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
TF_INUSE Flowing Temperature In Use DOUBLE 0 °F (3-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
FLW_ALM_OBJ Flow Alarm Object ObjectRef Alarm Instance: R/O: 2.0.0.XXX Legal
“Alarm_3X” Admin; Engineer;
(where X is Meas. Tech
instance number Operator; Auditor
between 1 and
24)
FCALC_ALM Flow Calculation Alarm Code BIN32 Liq LinMtr R/O: 2.0.0.XXX Legal
0 - Undefined Flow Admin; Engineer;
1 - Invalid Input(s) Calculation Meas. Tech;
2 - Invalid Configuration Alarm (281) Operator; Auditor
3 - Calculation Error
4 - Boundary Error
5 - Invalid Station
Assignment
6-8: Undefined
9 - Flow
10 - Pressure
11 - Temperature
12 - Flowing Density
13 - Base Density
18 - Total/Increment
19-25: Undefined
26 - K-factor/Meter Factor
27 - Mass Pressure
Correction Factor
28 - Water Cut
29 - Shrinkage Factor
30 - CTL
31 - NGL Factor/Flash Gas
Factor
Object Parameter Listing 557
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq LinMtr
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
FACTOR_CURVE_ Meter Factor / K-factor Curve ENUM16 02 Single Meter Factor Curve R/W: 2.0.0.XXX ▪ Log Changes
OPT Option Factor / Single K- Option (183) Admin; Engineer; ▪ Legal
0 - Single Meter Factor / factor (0) Meas. Tech
Single K-factor R/O:
1 - Meter Factor Curve / Operator; Auditor
Single K-factor
2 - Single Meter Factor / K-
factor Curve
MF_OVRD Override Meter Factor DOUBLE 1 R/W: 2.0.0.XXX ▪ Log Changes
0.000001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
MF_CALC Calculated Meter Factor DOUBLE 0 1 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
MF_UMODE Meter Factor Mode ENUM16 12 Override (1) User Mode R/W: 2.0.0.XXX ▪ Log Changes
1 - Override Selection 2 (97) Admin; Engineer; ▪ Legal
2 - Calculated Meas. Tech
R/O:
Operator; Auditor
MF_SEL Selected Meter Factor DOUBLE 0 1 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
KF_OVRD Override K-factor DOUBLE 1 pulses/ft³ (27- R/W: 2.0.0.XXX ▪ Log Changes
0.000001 0) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
KF_CALC Calculated K-factor DOUBLE 0 1 pulses/ft³ R/O: 2.0.0.XXX Legal
(27-0) Admin; Engineer;
Meas. Tech;
Operator; Auditor
558 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq LinMtr
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
KF_UMODE K-Factor Mode ENUM16 12 Override (1) User Mode R/W: 2.0.0.XXX ▪ Log Changes
1 - Override Selection 2 (97) Admin; Engineer; ▪ Legal
2 - Calculated Meas. Tech
R/O:
Operator; Auditor
KF_SEL Selected K-factor DOUBLE 0 1 pulses/ft³ R/O: 2.0.0.XXX Legal
(27-0) Admin; Engineer;
Meas. Tech
Operator; Auditor
CTLM_W_PARAM Water CTLm Parameter ParamRef Undefined R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
CTLM_W_OVRD Override Water CTLm DOUBLE 0 1 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
CTLM_W_CALC Calculated Water CTLm DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
CTLM_W_UMODE Water CTLm Mode ENUM16 02 Calculated (2) User Mode R/W: 2.0.0.XXX ▪ Log Changes
0 - Measured Selection 1 (79) Admin; Engineer; ▪ Legal
1 - Override Meas. Tech
2 - Calculated R/O:
Operator; Auditor
CTLM_W_SEL Selected Water CTLm DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
IQ_RATE Indicated Quantity Flow Rate DOUBLE 0 MCF/d (12-7) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Object Parameter Listing 559
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq LinMtr
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech;
Operator; Auditor
GVOL_RATE Gross Volume Flow Rate DOUBLE 0 MCF/d (12-7) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
UVOL_O_RATE Oil Unshrunk Volume Flow DOUBLE 0 bbl/d (298-35) R/O: 2.0.0.XXX Legal
Rate Admin; Engineer;
Meas. Tech;
Operator; Auditor
SVOL_O_RATE Oil Net Volume Flow Rate DOUBLE 0 bbl/d (298-35) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
UVOL_W_RATE Water Uncorrected Volume DOUBLE 0 bbl/d (299-35) R/O: 2.0.0.XXX Legal
Flow Rate Admin; Engineer;
Meas. Tech;
Operator; Auditor
SVOL_W_RATE Water Net Volume Flow Rate DOUBLE 0 bbl/d (299-35) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
SVOL_FG_RATE Flash Gas Net Volume Flow DOUBLE 0 bbl/d (298-35) R/O: 2.0.0.XXX Legal
Rate Admin; Engineer;
Meas. Tech;
Operator; Auditor
SVOL_NGL_RATE NGL Net Volume Flow Rate DOUBLE 0 bbl/d (298-35) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
UVOL_O_RAW_TOT Oil Unshrunk Volume Total DOUBLE 0 bbl (296-8) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
560 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq LinMtr
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
SVOL_O_RAW_TOT Oil Net Volume Total DOUBLE 0 bbl (296-8) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
IQ_RAW_TOT Indicated Quantity Total DOUBLE 0 bbl (296-8) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
GVOL_RAW_TOT Gross Volume Total DOUBLE 0 bbl (296-8) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
UVOL_W_RAW_TOT Water Metered Volume Total DOUBLE 0 bbl (297-8) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
SVOL_W_RAW_TOT Water Net Volume Total DOUBLE 0 bbl (297-8) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
SVOL_FG_RAW_TOT Flash Gas Net Volume Total DOUBLE 0 bbl (296-8) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
SVOL_NGL_RAW_ NGL Net Volume Total DOUBLE 0 bbl (296-8) R/O: 2.0.0.XXX Legal
TOT Admin; Engineer;
Meas. Tech;
Operator; Auditor
PULSE_RAW_TOT Pulse Total DOUBLE 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
IQ_TOT_OBJ Indicated Quantity Total ObjectRef Total Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Object Admin; Engineer; ▪ Legal
Meas. Tech
Object Parameter Listing 561
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq LinMtr
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
GVOL_TOT_OBJ Gross Volume Total Object ObjectRef Total Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
UVOL_O_TOT_OBJ Oil Unshrunk Volume Total ObjectRef Total Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Object Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
SVOL_O_TOT_OBJ Oil Net Volume Total Object ObjectRef Total Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
UVOL_W_TOT_OBJ Water Metered Volume Total ObjectRef Total Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Object Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
SVOL_W_TOT_OBJ Water Net Volume Total ObjectRef Total Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Object Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
SVOL_FG_TOT_OBJ Flash Gas Net Volume Total ObjectRef Total Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Object Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
SVOL_NGL_TOT_OB NGL Net Volume Total Object ObjectRef Total Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
J Admin; Engineer; ▪ Legal
Meas. Tech
562 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq LinMtr
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
PULSE_TOT_OBJ Pulse Total Object ObjectRef Total Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_1 K-factor/MF 1 DOUBLE 1 R/W: 2.0.0.XXX ▪ Log Changes
0.000001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_1_FLOW Frequency/Flowrate 1 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_2 K-factor/MF 2 DOUBLE 1 R/W: 2.0.0.XXX ▪ Log Changes
0.000001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_2_FLOW Frequency/Flowrate 2 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_3 K-factor/MF 3 DOUBLE 1 R/W: 2.0.0.XXX ▪ Log Changes
0.000001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_3_FLOW Frequency/Flowrate 3 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Object Parameter Listing 563
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq LinMtr
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
FACTOR_4 K-factor/MF 4 DOUBLE 1 R/W: 2.0.0.XXX ▪ Log Changes
0.000001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_4_FLOW Frequency/Flowrate 4 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_5 K-factor/MF 5 DOUBLE 1 R/W: 2.0.0.XXX ▪ Log Changes
0.000001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_5_FLOW Frequency/Flowrate 5 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_6 K-factor/MF 6 DOUBLE 1 R/W: 2.0.0.XXX ▪ Log Changes
0.000001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_6_FLOW Frequency/Flowrate 6 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_7 K-factor/MF 7 DOUBLE 1 R/W: 2.0.0.XXX ▪ Log Changes
0.000001 Admin; Engineer; ▪ Legal
Meas. Tech
564 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq LinMtr
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
FACTOR_7_FLOW Frequency/Flowrate 7 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_8 K-factor/MF 8 DOUBLE 1 R/W: 2.0.0.XXX ▪ Log Changes
0.000001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_8_FLOW Frequency/Flowrate 8 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_9 K-factor/MF 9 DOUBLE 1 R/W: 2.0.0.XXX ▪ Log Changes
0.000001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_9_FLOW Frequency/Flowrate 9 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_10 K-factor/MF 10 DOUBLE 1 R/W: 2.0.0.XXX ▪ Log Changes
0.000001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_10_FLOW Frequency/Flowrate 10 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Object Parameter Listing 565
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq LinMtr
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
FACTOR_11 K-factor/MF 11 DOUBLE 1 R/W: 2.0.0.XXX ▪ Log Changes
0.000001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_11_FLOW Frequency/Flowrate 11 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_12 K-factor/MF 12 DOUBLE 1 R/W: 2.0.0.XXX ▪ Log Changes
0.000001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_12_FLOW Frequency/Flowrate 12 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_13 K-factor/MF 13 DOUBLE 1 RESERVED R/W: 2.0.0.XXX ▪ Log Changes
0.000001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_13_FLOW Frequency/Flowrate 13 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_14 K-factor/MF 14 DOUBLE 1 R/W: 2.0.0.XXX ▪ Log Changes
0.000001 Admin; Engineer; ▪ Legal
Meas. Tech
566 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq LinMtr
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
FACTOR_14_FLOW Frequency/Flowrate 14 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_15 K-factor/MF 15 DOUBLE 1 R/W: 2.0.0.XXX ▪ Log Changes
0.000001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_15_FLOW Frequency/Flowrate 15 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_16 K-factor/MF 16 DOUBLE 1 R/W: 2.0.0.XXX ▪ Log Changes
0.000001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_16_FLOW Frequency/Flowrate 16 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_17 K-factor/MF 17 DOUBLE 1 R/W: 2.0.0.XXX ▪ Log Changes
0.000001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_17_FLOW Frequency/Flowrate 17 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Object Parameter Listing 567
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq LinMtr
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
FACTOR_18 K-factor/MF 18 DOUBLE 1 R/W: 2.0.0.XXX ▪ Log Changes
0.000001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_18_FLOW Frequency/Flowrate 18 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_19 K-factor/MF 19 DOUBLE 1 R/W: 2.0.0.XXX ▪ Log Changes
0.000001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_19_FLOW Frequency/Flowrate 19 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_20 K-factor/MF 20 DOUBLE 1 R/W: 2.0.0.XXX ▪ Log Changes
0.000001 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FACTOR_20_FLOW Frequency/Flowrate 20 DOUBLE 0 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
MASS_CORR_PF_ Mass Pressure Effect Option ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX ▪ Log Changes
OPT 0 - Disable Selection (30) Admin; Engineer; ▪ Legal
1 - Enable Meas. Tech
568 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq LinMtr
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
PCAL Calibration Pressure DOUBLE 0 psi(g) (29-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
MASS_CORR_PF_ Mass Pressure Effect DOUBLE 0 –0.0002 %/psi (247-0) R/W: 2.0.0.XXX ▪ Log Changes
COEFF Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
CTLO_PARAM CTL Observed to Base ParamRef Undefined R/W: 2.3.0.XXX ▪ Log Changes
Parameter Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
CTLO_OVRD Override CTL Observed to DOUBLE 0 R/W: 2.3.0.XXX ▪ Log Changes
Base Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
CTLO_CALC Calculated CTL Observed to DOUBLE 0 R/O: 2.3.0.XXX Legal
Base Admin; Engineer;
Meas. Tech
Operator; Auditor
CTLO_UMODE CTL Observed to Base Mode ENUM16 02 2 User Mode R/W: 2.3.0.XXX ▪ Log Changes
0 – External Selection 6 Admin; Engineer; ▪ Legal
1 – Override (321) Meas. Tech
2 – Calculated R/O:
Operator; Auditor
CTLO_SEL Selected CTL Observed to DOUBLE 0 R/O: 2.3.0.XXX Legal
Base Admin; Engineer;
Meas. Tech
Operator; Auditor
Object Parameter Listing 569
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq LinMtr
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
CPLO_PARAM CPL Observed to Base ParamRef Undefined R/W: 2.3.0.XXX ▪ Log Changes
Parameter Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
CPLO_OVRD Override CPL Observed to DOUBLE 0 R/W: 2.3.0.XXX ▪ Log Changes
Base Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
CPLO_CALC Calculated CPL Observed to DOUBLE 0 R/O: 2.3.0.XXX Legal
Base Admin; Engineer;
Meas. Tech
Operator; Auditor
CPLO_UMODE CPL Observed to Base Mode ENUM16 02 2 User Mode R/W: 2.3.0.XXX ▪ Log Changes
0 – External Selection 6 Admin; Engineer; ▪ Legal
1 – Override (321) Meas. Tech
2 – Calculated R/O:
Operator; Auditor
CPLO_SEL Selectd CPL Observed to DOUBLE 0 R/O: 2.3.0.XXX Legal
Base Admin; Engineer;
Meas. Tech
Operator; Auditor
CTLM_PARAM CTL Base to Meter ParamRef Undefined R/W: 2.3.0.XXX ▪ Log Changes
Parameter Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
CTLM_OVRD Override CTL Base to Meter DOUBLE 0 R/W: 2.3.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
570 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq LinMtr
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
CTLM_CALC Calculated CTL Base to Meter DOUBLE 0 R/O: 2.3.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
CTLM_UMODE CTL Based to Meter Mode ENUM16 0 2 2 User Mode R/W: 2.3.0.XXX ▪ Log Changes
0 = External Selection 6 Admin; Engineer; ▪ Legal
1 – Override (321) Meas. Tech
2 – Calculated R/O:
Operator; Auditor
CTLM_SEL Selected CTL Base to Meter DOUBLE 0 R/O: 2.3.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
CPLM_PARAM CPL Base to Meter ParamRef Undefined R/W: 2.3.0.XXX ▪ Log Changes
Parameter Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
CPLM_OVRD Override CPL Base to Meter DOUBLE 0 R/W: 2.3.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech;
R/O:
Operator; Auditor
CPLM_CALC Calculated CPL Base to Meter DOUBLE 0 R/O: 2.3.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
CPLM_UMODE CPL Base to Meter Mode ENUM16 02 2 User Mode R/W: 2.3.0.XXX ▪ Log Changes
0 - External Selection 6 Admin; Engineer; ▪ Legal
1 – Override (321) Meas. Tech
2 - Calculated R/O:
Operator; Auditor
Object Parameter Listing 571
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq LinMtr
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
CPLM_SEL Selected CPL Base to Meter DOUBLE 0 R/O: 2.3.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
CTL_INUSE CTL In Use DOUBLE 0 R/O: 2.3.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
CPL_INUSE CPL In Use DOUBLE 0 R/O: 2.3.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
CCF_INUSE CCF In Use DOUBLE 0 R/O: 2.3.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
CSW_INUSE Sediment & Water DOUBLE 0 R/O: 2.3.0.XXX Legal
Correction Factor In Use Admin; Engineer;
Meas. Tech
Operator; Auditor
GSVOL_RATE Gross Standard Volume Flow DOUBLE 0 bbl/d (298-35) R/O: 2.3.0.XXX Legal
Rate Admin; Engineer;
Meas. Tech
Operator; Auditor
MASS_RATE Mass Flow Rate DOUBLE 0 Mlb/d (13-7) R/O: 2.3.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
GSVOL_RAW_TOT Gross Standard Volume Total DOUBLE 0 bbl (296-8) R/O: 2.3.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
572 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq LinMtr
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
MASS_RAW_TOT Mass Total DOUBLE 0 Mlb (10-2) R/O: Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
GSVOL_TOT_OBJ Gross Standard Volume Total ObjectRef Varies by instance R/O: Legal
Object Admin; Engineer;
Meas. Tech
Operator; Auditor
MASS_TOT_OBJ Mass Total Object ObjectRef Varies by instance R/O: Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
FLWTM_RAW_TOT Flow Time Total DOUBLE 0 Seconds (359- R/O: Legal
0) Admin; Engineer;
Meas. Tech
Operator; Auditor
FLWTM_TOT_OBJ Flow Time Total Object ObjectRef Varies by instance R/O: Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
CTPL_INUSE CTPL In Use DOUBLE 0 R/O: Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
MF_INUSE Meter Factor In Use DOUBLE 0 R/O: 2.5.0.X Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PF_INUSE_G Flowing Pressure In Use DOUBLE psi(g) (29-0) R/O: 2.7.X.XXX Legal
(Gauge) Admin; Engineer;
Meas. Tech
Operator; Auditor
Object Parameter Listing 573
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq LinMtr
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
FLOW_INPUT_OPT Flow Input Option ENUM16 0-2 Flow Input (0) Flow Input R/W: 2.9.0.XXX Log Changes
0 – Flow Input Option (358) Admin; Engineer; Legal
1 – External Accumulator Meas. Tech
2 – External Accumulator R/O:
with Flow Rate Operator; Auditor
ACCUM_PARAM External Accumulator PRMREF R/W: 2.9.0.XXX Log Changes
Parameter Admin; Engineer; Legal
Meas. Tech
R/O:
Operator; Auditor
ACCUM_CURRENT External Accumulator Value DOUBLE bbl (296-8) R/O: 2.9.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
ACCUM_ROLLOVER External Accumulator DOUBLE bbl (296-8) R/W: 2.9.0.XXX Log Changes
Rollover Admin; Engineer; Legal
Meas. Tech
R/O:
Operator; Auditor
MAX_IQ_RATE Maximum Indicated Quantity DOUBLE bbl/d (298-35) R/W: 2.9.0.XXX Log Changes
Flow Rate Admin; Engineer; Legal
Meas. Tech
R/O:
Operator; Auditor
TRANSHGRP_OBJ Transactional History Group OBJREF Varies by instance R/W: 2.12.0.XXX Log Changes
Admin; Engineer; Legal
Meas. Tech
R/O:
Operator; Auditor
PREV_BATCH_STAR Previous Batch Start Time TIME R/O: 2.12.0.XXX Legal
T_TM Admin; Engineer;
Meas. Tech
Operator; Auditor
574 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq LinMtr
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
PREV_BATCH_END_ Previous Batch End Time TIME R/O: 2.12.0.XXX Legal
TM Admin; Engineer;
Meas. Tech
Operator; Auditor
CUR_BATCH_START Current Batch Start Time TIME R/O: 2.12.0.XXX Legal
_TM Admin; Engineer;
Meas. Tech
Operator; Auditor
CUR_BATCH_NUM Current Batch Number UINT32 R/O: 2.12.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PREV_BATCH_NUM Previous Batch Number UINT32 R/O: 2.12.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
OP_STATUS Operation Status BIN32 Meter Status R/O: 2.12.0.XXX Legal
(330) Admin; Engineer;
Meas. Tech
Operator; Auditor
CUR_DAY_START_T Current Day Start Time TIME R/O: 2.13.0.XXX Legal
M Admin; Engineer;
Meas. Tech
Operator; Auditor
PREV_DAY_START_T Previous Day Start Time TIME R/O: 2.13.0.XXX Legal
M Admin; Engineer;
Meas. Tech
Operator; Auditor
CUR_MNTH_START_ Current Month Start Time TIME R/O: 2.13.0.XXX Legal
TM Admin; Engineer;
Meas. Tech
Operator; Auditor
Object Parameter Listing 575
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq LinMtr
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
PREV_MNTH_START Previous Month Start Time TIME R/O: 2.13.0.XXX Legal
_TM Admin; Engineer;
Meas. Tech
Operator; Auditor
BATCH_END_CMD Batch End Command ENUM16 0 -> 1 0 End Batch R/W: 2.13.0.XXX Legal
Command Admin; Engineer;
(363) Meas. Tech
R/O:
Operator; Auditor
BATCH_END_ Batch Start Parameter PRMREF Undefined R/W: 2.13.0.XXX Legal
PARAM Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
CUR_PER_START_ Current Hour Start Time TIME R/O: 2.13.0.XXX Legal
TM Admin; Engineer;
Meas. Tech
Operator; Auditor
PREV_PER_START_ Previous Hour Start Time TIME R/O: 2.13.0.XXX Legal
TM Admin; Engineer;
Meas. Tech
Operator; Auditor
CUR_WK_START_TM Current Week Start Time TIME R/O: 2.13.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PREV_WK_START_ Previous Week Start Time TIME R/O: 2.13.0.XXX Legal
TM Admin; Engineer;
Meas. Tech
Operator; Auditor
FLOW_TYPE Flow Type ENUM16 R/W: 2.14.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
576 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq LinMtr
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
CFPS_INUSE Pressure Effect Correction DOUBLE 0 -> 1 Flow Type R/O: 2.15.0.XXX Legal
Factor (278) Admin; Engineer;
Meas. Tech
Operator; Auditor
PREV_PER_END_TM Previous Hour End Time TIME R/O: 2.17.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PREV_DAY_END_TM Previous Day End Time TIME R/O: 2.17.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PREV_WK_END_TM Previous Week End Time TIME R/O: 2.17.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PREV_MNTH_END_T Previous Month End Time TIME R/O: 2.17.0.XXX Legal
M Admin; Engineer;
Meas. Tech
Operator; Auditor
Object Parameter Listing 577
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.45 Liq Prod Parameters
Description: The Liq Prod object provides the parameters for configuring liquid products.
Number of Instances: 36 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-44: Liq Prod Parameters
Liq Prod
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.3.0.XXX ▪ Log Changes
“Liq Prod_X” (where Admin; Engineer; ▪ Legal
X is instance Meas. Tech
number between 1 R/O:
and 36) Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.3.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.3.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech;
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 Undefined R/W: 2.3.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
578 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq Prod
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
LIQ_TYPE Product Type ENUM16 00 0 (Crude Oil) Product Type R/W: 2.3.0.XXX ▪ Log Changes
(322) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
API11_METHOD API Ch 11 Volume Correction ENUM16 00 0 (2004/2007) API Ch 11 R/W: 2.3.0.XXX ▪ Log Changes
Method Volume Admin; Engineer; ▪ Legal
Correction Meas. Tech
Method (324) R/O:
Operator; Auditor
DENSB Base Density DOUBLE Min = 30 °API (294-8) R/W: 2.3.0.XXX ▪ Log Changes
-50 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
DENSB_UNITS_TB Base Density Units & Enum16 1181 °API@60°F (81) Base Density R/W: 2.5.0.XXX ▪ Log Changes
Temperature Units & Admin; Engineer; ▪ Legal
11 - kg/m³@60°F Temperature Meas. Tech
12 - kg/m³@15°C (351) R/O:
13 - kg/m³@20°C Operator; Auditor
14 - kg/m³@30°C
15 - kg/m³@0°C
22 - g/cc@15°C
23 - g/cc@20°C
24 - g/cc@30°C
25 - g/cc@0°C
71 - RD@60°F
72 - RD@15°C
73 - RD@20°C
74 - RD@30°C
Object Parameter Listing 579
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Liq Prod
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
75 - RD@0°C
81 - °API@60°F
580 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.46 Local Parameters
Description: The Local object provides the parameters for configuring localization profiles.
Number of Instances: 3 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-45: Local Parameters
Local
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
1-Local_1 Admin; Engineer; ▪ Legal
2-Local_2 Meas. Tech
3-Local_3 R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech;
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
LANGUAGE Language ENUM16 00 English (0) Language R/W: 2.0.0.XXX ▪ Log Changes
0 - English Selection (37) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 581
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Local
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
TM_DSP_PREF Time Display Format Pref ENUM16 08 12 Hour (0) Time Format R/W: 2.0.0.XXX ▪ Log Changes
0 - 12 Hour Selection (36) Admin; Engineer; ▪ Legal
1 - 24 Hour Meas. Tech
R/O:
Operator; Auditor
DT_DSP_PREF Date Display Format Pref ENUM16 08 MM/DD/YY (0) Date Format R/W: 2.0.0.XXX ▪ Log Changes
0 - MM/DD/YY Selection (35) Admin; Engineer; ▪ Legal
1 - MM/DD/YYYY Meas. Tech
2 - DD/MM/YY R/O:
3 - DD/MM/YYYY Operator; Auditor
4 - YYYY/MM/DD
5 - YY/MM/DD
582 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.47 Log Parameters
Description: The Log object provides the parameters for configuring and viewing logs.
Number of Instances: 106 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-46: Log Parameters
Log
Description of Default
functionality and Data Measurement
Name meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX Instance:
“Log_X” (where X is Admin; Engineer; 1=Log Changes & Legal
instance number Meas. Tech 2=Log Changes
between 1 and 106) R/O: 3=Log Changes & Legal
Operator; Auditor 4-6=Log Changes
7-106=Log Changes &
Legal
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 Varies by instance R/W: 2.0.0.XXX Instance:
Admin; Engineer; 1=Log Changes & Legal
Meas. Tech 2=Log Changes
R/O: 3=Log Changes & Legal
Operator; Auditor 4-6=Log Changes
7-106=Log Changes &
Legal
Object Parameter Listing 583
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Log
Description of Default
functionality and Data Measurement
Name meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
LOG_TYPE Type of Log ENUM16 Instance: Log Type (156) R/O: 2.0.0.XXX Instance:
0 - Undefined 1 - Legal Event (1) Admin; Engineer; 1=Legal
1 - Legal Event 2 - Non Legal Event Meas. Tech; 2=Undefined
2 - Non Legal Event (2) Operator; Auditor 3=Legal
3 - Legal Alarm 3 - Legal Alarm (3) 4-6=Undefined
4 - Non Legal Alarm 4 - Undefined (0) 7-106=Legal
5 - Legal History 5-10= Non Legal
6 - Non Legal History History (6)
11-106= Legal
History (5)
LOG_ENB Logging ENUM16 01 Instance: Enable/Disable For instances 1-4: 2.0.0.XXX Instance:
0 - Disable 1-3 =Enable (1) Selection (30) R/O: 1=Legal
1 - Enable 4=Disable (0) Admin; Engineer; 2=Undefined
5-106=Enable (1) Meas. Tech; 3=Legal
Operator; Auditor 4-6=Undefined
7-106=Log Changes,
For instances 5- Legal
106: R/W
Admin; Engineer;
Meas. Tech
R/O:
Admin; Engineer;
Operator; Auditor:
HIST_GRP_OBJ History Group ObjectRef Hist Grp Varies by instance R/O: 2.0.0.XXX Instance:
Admin; Engineer; 1=Legal
Meas. Tech; 2=Undefined
Operator; Auditor 3=Legal
4-6=Undefined
7-106=Legal
LAST_READ_SEQ Sequence Number UINT32 0 R/W: 2.0.0.XXX Instance:
Last Read Record Admin; Engineer; 1=Legal
Meas. Tech 2=Undefined
R/O: 3=Legal
Operator; Auditor 4-6=Undefined
7-106=Legal
584 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Log
Description of Default
functionality and Data Measurement
Name meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
FULL_LIM Log Full Remaining UINT16 Varies by Varies by instance R/W: 2.0.0.XXX Instance:
Records instance Admin; Engineer; 1=Log Changes & Legal
Meas. Tech 2=Log Changes
R/O: 3=Log Changes & Legal
Operator; Auditor 4-6=Log Changes
7-106=Log Changes &
Legal
NEAR_LIM Log Nearly Full UINT16 Varies by Varies by instance R/W: 2.0.0.XXX Instance:
Remaining Records instance Admin; Engineer; 1=Log Changes & Legal
Meas. Tech 2=Log Changes
R/O: 3=Log Changes & Legal
Operator; Auditor 4-6=Log Changes
7-106=Log Changes &
Legal
LOG_ALM Log Full Alarm Status BIN32 0 R/O: 2.0.0.XXX Instance:
Admin; Engineer; 1=Legal
Meas. Tech; 2=Undefined
Operator; Auditor 3=Legal
4-6=Undefined
7-106=Legal
LOG_BUSY Log Busy ENUM16 01 Disable (0) Enable/Disable R/O: 2.0.0.XXX Instance:
0 - Disable Selection (30) Admin; Engineer; 1=Legal
1 - Enable Meas. Tech; 2=Undefined
Operator; Auditor 3=Legal
4-6=Undefined
7-106=Legal
NUM_LOST_ Num Of Lost Records UINT32 0 R/O: 2.0.0.XXX Instance:
RECORDS Admin; Engineer; 1=Legal
Meas. Tech; 2=Undefined
Operator; Auditor 3=Legal
4-6=Undefined
7-106=Legal
Object Parameter Listing 585
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Log
Description of Default
functionality and Data Measurement
Name meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
LATEST_SEQ_NUM Latest Sequence UINT32 0 R/O: 2.14.0.XX Instance:
Number Admin; Engineer; 1=Legal
Meas. Tech; 2=Undefined
Operator; Auditor 3=Legal
4-6=Undefined
7-106=Legal
586 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.48 MapTable Parameters
Description: The MapTable object provides the parameters for configuring Modbus map tables.
Number of Instances: 48 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-47: MapTable Parameters
Map Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Register Table R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
N/A:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
N/A:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure N/A:
3 - Override Operator; Auditor
4 - Inactive
TABLE_NO Table Number / Register UINT8 Instance: R/O: 2.0.0.XXX
Mapping “1_X” (where X is Admin; Engineer;
instance number Meas. Tech
between 1 and 48) N/A:
Operator; Auditor
REG_TABLE_TAG Reg Table Identification Tag UC20 Instance: R/O: 2.0.0.XXX Log Changes
“Reg Map_X” Admin; Engineer;
(where X is instance Meas. Tech
Object Parameter Listing 587
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Map Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
number between 1 N/A:
and 48) Operator; Auditor
START_REG_1 Starting Register 1 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
END_REG_1 Ending Register 1 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
START_PARAM_1 Starting Parameter 1 ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
INDEXING_1 Point/Param Index Option 1 ENUM16 01 Point (0) Indexing Used R/W: 2.0.0.XXX Log Changes
0 - Point (160) Admin; Engineer;
1 - Parameter Meas. Tech
R/O:
Operator
N/A:
Auditor
REM_DTYPE_1 Remote Data Type 1 ENUM16 050 No Conversion (0) Remote Data R/W: 2.0.0.XXX Log Changes
Refer to Section 5.1 – Types (66) Admin; Engineer;
Measurement Types Meas. Tech
R/O:
Operator
588 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Map Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
N/A:
Auditor
START_REG_2 Starting Register 2 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
END_REG_2 Ending Register 2 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
START_PARAM_2 Starting Parameter 2 ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
INDEXING_2 Point/Param Index Option 2 ENUM16 01 Point (0) Indexing Used R/W: 2.0.0.XXX Log Changes
0 - Point (160) Admin; Engineer;
1 - Parameter Meas. Tech
R/O:
Operator
N/A:
Auditor
REM_DTYPE_2 Remote Data Type 2 ENUM16 050 No Conversion (0) Remote Data R/W: 2.0.0.XXX Log Changes
See REM_DTYPE_1 Types (66) Admin; Engineer;
Meas. Tech
R/O:
Operator
Object Parameter Listing 589
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Map Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
N/A:
Auditor
START_REG_3 Starting Register 3 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
END_REG_3 Ending Register 3 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
START_PARAM_3 Starting Parameter 3 ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
INDEXING_3 Point/Param Index Option 3 ENUM16 01 Point (0) Indexing Used R/W: 2.0.0.XXX Log Changes
0 - Point (160) Admin; Engineer;
1 - Parameter Meas. Tech
R/O:
Operator
N/A:
Auditor
REM_DTYPE_3 Remote Data Type 3 ENUM16 050 No Conversion (0) Remote Data R/W: 2.0.0.XXX Log Changes
See REM_DTYPE_1 Types (66) Admin; Engineer;
Meas. Tech
R/O:
Operator
590 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Map Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
N/A:
Auditor
START_REG_4 Starting Register 4 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
END_REG_4 Ending Register 4 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
START_PARAM_4 Starting Parameter 4 ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
INDEXING_4 Point/Param Index Option 4 ENUM16 01 Point (0) Indexing Used R/W: 2.0.0.XXX Log Changes
0 - Point (160) Admin; Engineer;
1 - Parameter Meas. Tech
R/O:
Operator
N/A:
Auditor
REM_DTYPE_4 Remote Data Type 4 ENUM16 050 No Conversion (0) Remote Data R/W: 2.0.0.XXX Log Changes
See REM_DTYPE_1 Types (66) Admin; Engineer;
Meas. Tech
R/O:
Operator
Object Parameter Listing 591
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Map Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
N/A:
Auditor
START_REG_5 Starting Register 5 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
END_REG_5 Ending Register 5 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
START_PARAM_5 Starting Parameter 5 ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
INDEXING_5 Point/Param Index Option 5 ENUM16 01 Point (0) Indexing Used R/W: 2.0.0.XXX Log Changes
0 - Point (160) Admin; Engineer;
1 - Parameter Meas. Tech
R/O:
Operator
N/A:
Auditor
REM_DTYPE_5 Remote Data Type 5 ENUM16 050 No Conversion (0) Remote Data R/W: 2.0.0.XXX Log Changes
See REM_DTYPE_1 Types (66) Admin; Engineer;
Meas. Tech
R/O:
Operator
592 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Map Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
N/A:
Auditor
START_REG_6 Starting Register 6 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
END_REG_6 Ending Register 6 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
START_PARAM_6 Starting Parameter 6 ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
INDEXING_6 Point/Param Index Option 6 ENUM16 01 Point (0) Indexing Used R/W: 2.0.0.XXX Log Changes
0 - Point (160) Admin; Engineer;
1 - Parameter Meas. Tech
R/O:
Operator
N/A:
Auditor
REM_DTYPE_6 Remote Data Type 6 ENUM16 050 No Conversion (0) Remote Data R/W: 2.0.0.XXX Log Changes
See REM_DTYPE_1 Types (66) Admin; Engineer;
Meas. Tech
R/O:
Operator
Object Parameter Listing 593
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Map Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
N/A:
Auditor
START_REG_7 Starting Register 7 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
END_REG_7 Ending Register 7 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
START_PARAM_7 Starting Parameter 7 ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
INDEXING_7 Point/Param Index Option 7 ENUM16 01 Point (0) Indexing Used R/W: 2.0.0.XXX Log Changes
0 - Point (160) Admin; Engineer;
1 - Parameter Meas. Tech
R/O:
Operator
N/A:
Auditor
REM_DTYPE_7 Remote Data Type 7 ENUM16 050 No Conversion (0) Remote Data R/W: 2.0.0.XXX Log Changes
See REM_DTYPE_1 Types (66) Admin; Engineer;
Meas. Tech
R/O:
Operator
594 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Map Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
N/A:
Auditor
START_REG_8 Starting Register 8 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
END_REG_8 Ending Register 8 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
START_PARAM_8 Starting Parameter 8 ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
INDEXING_8 Point/Param Index Option 8 ENUM16 01 Point (0) Indexing Used R/W: 2.0.0.XXX Log Changes
0 - Point (160) Admin; Engineer;
1 - Parameter Meas. Tech
R/O:
Operator
N/A:
Auditor
REM_DTYPE_8 Remote Data Type 8 ENUM16 050 No Conversion (0) Remote Data R/W: 2.0.0.XXX Log Changes
See REM_DTYPE_1 Types (66) Admin; Engineer;
Meas. Tech
R/O:
Operator
Object Parameter Listing 595
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Map Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
N/A:
Auditor
START_REG_9 Starting Register 9 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
END_REG_9 Ending Register 9 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
START_PARAM_9 Starting Parameter 9 ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
INDEXING_9 Point/Param Index Option 9 ENUM16 01 Point (0) Indexing Used R/W: 2.0.0.XXX Log Changes
0 - Point (160) Admin; Engineer;
1 - Parameter Meas. Tech
R/O:
Operator
N/A:
Auditor
REM_DTYPE_9 Remote Data Type 9 ENUM16 050 No Conversion (0) Remote Data R/W: 2.0.0.XXX Log Changes
See REM_DTYPE_1 Types (66) Admin; Engineer;
Meas. Tech
R/O:
Operator
596 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Map Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
N/A:
Auditor
START_REG_10 Starting Register 10 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
END_REG_10 Ending Register 10 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
START_PARAM_10 Starting Parameter 10 ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
INDEXING_10 Point/Param Index Option 10 ENUM16 01 Point (0) Indexing Used R/W: 2.0.0.XXX Log Changes
0 - Point (160) Admin; Engineer;
1 - Parameter Meas. Tech
R/O:
Operator
N/A:
Auditor
REM_DTYPE_10 Remote Data Type 10 ENUM16 050 No Conversion (0) Remote Data R/W: 2.0.0.XXX Log Changes
See REM_DTYPE_1 Types (66) Admin; Engineer;
Meas. Tech
R/O:
Operator
Object Parameter Listing 597
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Map Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
N/A:
Auditor
START_REG_11 Starting Register 11 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
END_REG_11 Ending Register 11 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
START_PARAM_11 Starting Parameter 11 ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
INDEXING_11 Point/Param Index Option 11 ENUM16 01 Point (0) Indexing Used R/W: 2.0.0.XXX Log Changes
0 - Point (160) Admin; Engineer;
1 - Parameter Meas. Tech
R/O:
Operator
N/A:
Auditor
REM_DTYPE_11 Remote Data Type 11 ENUM16 050 No Conversion (0) Remote Data R/W: 2.0.0.XXX Log Changes
See REM_DTYPE_1 Types (66) Admin; Engineer;
Meas. Tech
R/O:
Operator
598 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Map Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
N/A:
Auditor
START_REG_12 Starting Register 12 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
END_REG_12 Ending Register 12 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
START_PARAM_12 Starting Parameter 12 ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
INDEXING_12 Point/Param Index Option 12 ENUM16 01 Point (0) Indexing Used R/W: 2.0.0.XXX Log Changes
0 - Point (160) Admin; Engineer;
1 - Parameter Meas. Tech
R/O:
Operator
N/A:
Auditor
REM_DTYPE_12 Remote Data Type 12 ENUM16 050 No Conversion (0) Remote Data R/W: 2.0.0.XXX Log Changes
See REM_DTYPE_1 Types (66) Admin; Engineer;
Meas. Tech
R/O:
Operator
Object Parameter Listing 599
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Map Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
N/A:
Auditor
START_REG_13 Starting Register 13 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
END_REG_13 Ending Register 13 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
START_PARAM_13 Starting Parameter 13 ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
INDEXING_13 Point/Param Index Option 13 ENUM16 01 Point (0) Indexing Used R/W: 2.0.0.XXX Log Changes
0 - Point (160) Admin; Engineer;
1 - Parameter Meas. Tech
R/O:
Operator
N/A:
Auditor
REM_DTYPE_13 Remote Data Type 13 ENUM16 050 No Conversion (0) Remote Data R/W: 2.0.0.XXX Log Changes
See REM_DTYPE_1 Types (66) Admin; Engineer;
Meas. Tech
R/O:
Operator
600 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Map Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
N/A:
Auditor
START_REG_14 Starting Register 14 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
END_REG_14 Ending Register 14 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
START_PARAM_14 Starting Parameter 14 ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
INDEXING_14 Point/Param Index Option 14 ENUM16 01 Point (0) Indexing Used R/W: 2.0.0.XXX Log Changes
0 - Point (160) Admin; Engineer;
1 - Parameter Meas. Tech
R/O:
Operator
N/A:
Auditor
REM_DTYPE_14 Remote Data Type 14 ENUM16 050 No Conversion (0) Remote Data R/W: 2.0.0.XXX Log Changes
See REM_DTYPE_1 Types (66) Admin; Engineer;
Meas. Tech
R/O:
Operator
Object Parameter Listing 601
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Map Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
N/A:
Auditor
START_REG_15 Starting Register 15 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
END_REG_15 Ending Register 15 UINT16 0 0 R/W: 2.0.0.XXX Log Changes
65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
START_PARAM_15 Starting Parameter 15 ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
INDEXING_15 Point/Param Index Option 15 ENUM16 01 Point (0) Indexing Used R/W: 2.0.0.XXX Log Changes
0 - Point (160) Admin; Engineer;
1 - Parameter Meas. Tech
R/O:
Operator
N/A:
Auditor
602 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Map Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
REM_DTYPE_15 Remote Data Type 15 ENUM16 050 No Conversion (0) Remote Data R/W: 2.0.0.XXX Log Changes
See REM_DTYPE_1 Types (66) Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
Object Parameter Listing 603
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.49 MasterConf Parameters
Description: The MasterConf object provides the parameters for Modbus master configuration.
Number of Instances: 6 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-48: MasterConf Parameters
MasterConf
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Master Config R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
N/A:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
N/A:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure N/A:
3 - Override Operator; Auditor
4 - Inactive
COMM_PORT_TYPE Comm Port Type UC20 Instance: R/O: 2.0.0.XXX
1-Serial Port 1 Admin; Engineer;
2-Serial Port 2 Meas. Tech;
3-Serial Port 3 Operator
4-Serial Port 4 N/A:
Auditor
604 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
MasterConf
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
5-Ethernet Port 1
6-Ethernet Port 2
COMM_PORT_NUM Comm Port Number ENUM16 Instance: Comm Port R/O: 2.0.0.XXX
0 - Serial Port 1 1 - Serial Port 1 (0) Instance (302) Admin; Engineer;
1 - Serial Port 2 2 - Serial Port 2 (1) Meas. Tech;
2 - Serial Port 3 3 - Serial Port 3 (2) Operator
3 - Serial Port 4 4 - Serial Port 4 (3) N/A:
4 - Ethernet Port 1 5 - Ethernet Port 1 Auditor
5 - Ethernet Port 2 (4)
6 - Ethernet Port 2
(5)
MASTER_COMM_ Modbus Transmission Mode ENUM16 Instance Instance: Modbus Mode R/W: 2.0.0.XXX Log Changes
MODE 0 - ASCII : 1 - RTU (1) Selection (60) Admin; Engineer;
1 - RTU 1 - 01 2 - RTU (1) Meas. Tech
2 - TCP 2 - 01 3 - RTU (1) R/O:
3 - 01 4 - RTU (1) Operator
4 - 01 5 - TCP (2) N/A:
5 - 02 6 - TCP (2) Auditor
6 - 02
MASTER_BYTE_ORD Byte Order ENUM16 0 LSB (0) Modbus Byte R/W: 2.0.0.XXX Log Changes
0 - LSB Order Admin; Engineer;
1 - MSB Selection (61) Meas. Tech
R/O:
Operator
N/A:
Auditor
START_POLL Start Modbus Poll ENUM16 01 Cancel (0) Start Poll (158) R/W: 2.0.0.XXX
0 - Cancel Admin; Engineer;
1 - Start Meas. Tech
R/O:
Object Parameter Listing 605
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
MasterConf
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Operator
N/A:
Auditor
START_REQ_NUM Starting Request Number UINT8 1150 1 R/W: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
NUM_REQ Number of Requests UINT8 0150 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
RX_TIMEOUT Receive Timeout UINT16 1300 30 s (17-0) R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
RETRIES_NUM Number of Retries UINT8 0255 2 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
606 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
MasterConf
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
N/A:
Auditor
CONT_POLL Enable Continuous Polling ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX Log Changes
0 - Disable Selection (30) Admin; Engineer;
1 - Enable Meas. Tech
R/O:
Operator
N/A:
Auditor
REQ_DELAY Delay Between Individual FLOAT 0 0 s (17-0) R/W: 2.0.0.XXX Log Changes
Requests 86400 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
POLL_DELAY Delay after a Single UINT32 0 1 s (17-0) R/W: 2.0.0.XXX Log Changes
Sequence of Polls 86400 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
TCP_CONN_ TCP Connection Timeout UINT16 175 3 s (17-0) R/W: 2.0.0.XXX Log Changes
TIMEOUT Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
Object Parameter Listing 607
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
MasterConf
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
MASTER_TCP_ Enable TCP for Modbus ENUM16 01 Enable (1) Enable/Disable R/W: 2.0.0.XXX Log Changes
ENABLE Master Selection (30) Admin; Engineer;
0 - Disable Meas. Tech
1 - Enable R/O:
Operator; Auditor
ACTUAL_POLL_TIM Actual Poll Time FLOAT s (17-0) R/O: 2.5.1.XXX
E Admin; Engineer;
Meas. Tech
Operator; Auditor
608 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.50 Math Blk Parameters
Description: The Math Blk (Block) object provides the parameters for configuring mathematical equations using live
variables from the system as inputs.
Number of Instances: Between 0 and 100 instances may exist; by default, 12 exist.
Storage Location: Saved to internal configuration memory.
Table 5-49: Math Blk Parameters
Math Blk
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX Log Changes
“Math Blk_X” Admin; Engineer
(where X is instance R/O:
number between 1 Meas. Tech;
and 100) Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status RO: 2.0.0.XXX
0 - Normal (80) Admin; Engineer
1 - In Alarm Meas. Tech;
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 Instance: R/W: 2.0.0.XXX Log Changes
“Math Blk_X” Admin; Engineer
(where X is instance R/O:
number between 1 Meas. Tech;
and 100) Operator; Auditor
Object Parameter Listing 609
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Math Blk
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
MATH_ENABLE Enable Switch ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX Log Changes
0 - Disable Selection (30) Admin; Engineer
1 - Enable R/O:
Meas. Tech;
Operator; Auditor
INPUT_VAR_A_DESC Var A Description UC20 Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
INPUT_VAR_A_ Var A Param Ref ParamRef Undefined R/W: 2.0.0.XXX Log Changes
POINT Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
INPUT_VAR_A_VAL Variable A Value DOUBLE 0 R/W: 2.0.0.XXX
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
INPUT_VAR_B_DESC Var B Description UC20 Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
INPUT_VAR_B_ Var B Param Ref ParamRef Undefined R/W: 2.0.0.XXX Log Changes
POINT Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
INPUT_VAR_B_VAL Variable B Value DOUBLE 0 R/W: 2.0.0.XXX
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
610 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Math Blk
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
INPUT_VAR_C_DESC Var C Description UC20 Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
INPUT_VAR_C_ Var C Param Ref ParamRef Undefined R/W: 2.0.0.XXX Log Changes
POINT Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
INPUT_VAR_C_VAL Variable C Value DOUBLE 0 R/W: 2.0.0.XXX
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
INPUT_VAR_D_DES Var D Desc UC20 Undefined R/W: 2.0.0.XXX Log Changes
C Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
INPUT_VAR_D_ Var D Param Ref ParamRef Undefined R/W: 2.0.0.XXX Log Changes
POINT Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
INPUT_VAR_D_VAL Variable D Value DOUBLE 0 R/W: 2.0.0.XXX
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
R1_EQUATION R1 Math Equation UC40 Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
Object Parameter Listing 611
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Math Blk
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R1_VALIDATE R1 Validity Check ENUM16 Invalid (0) Math Block R/O: 2.0.0.XXX
0 - Invalid Equation State Admin; Engineer
1 - Valid (174) Meas. Tech;
Operator; Auditor
R2_EQUATION R2 Math Equation UC40 Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
R2_VALIDATE R2 Validity Check ENUM16 Invalid (0) Math Block R/O: 2.0.0.XXX
0 - Invalid Equation State Admin; Engineer
1 - Valid (174) Meas. Tech;
Operator; Auditor
R3_EQUATION R3 Math Equation UC40 Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
R3_VALIDATE R3 Validity Check ENUM16 Invalid (0) Math Block R/O: 2.0.0.XXX
0 - Invalid Equation State Admin; Engineer
1 - Valid (174) Meas. Tech;
Operator; Auditor
R1_VALUE Result 1 Value DOUBLE 0 R/O: 2.0.0.XXX
Admin; Engineer
Meas. Tech;
Operator; Auditor
R1_DESC Result 1 Description UC20 Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
612 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Math Blk
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R1_OUTPUT_POINT Result 1 Param Ref ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
R2_VALUE Result 2 Value DOUBLE 0 R/O: 2.0.0.XXX
Admin; Engineer
Meas. Tech;
Operator; Auditor
R2_DESC Result 2 Description UC20 Undefined R/W: Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
R2_OUTPUT_POINT Result 2 Param Ref ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
R3_VALUE Result 3 Value DOUBLE 0 R/O: 2.0.0.XXX
Admin; Engineer
Meas. Tech;
Operator; Auditor
R3_DESC Result 3 Description UC20 Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
R3_OUTPUT_POINT Result 3 Param Ref ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer
R/O:
Meas. Tech;
Operator; Auditor
Object Parameter Listing 613
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.51 Module Parameters
Description: The Module object provides the parameters that contain information on each of the hardware modules
that make up the system.
Number of Instances: 32 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-50: Module Parameters
Module
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
“Module_X” (where X Admin ▪ Legal
is instance number R/O:
between 1 and 32) Engineer; Meas.
Tech; Operator;
Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech;
2 - Failure Operator;
3 - Override Auditor
4 - Inactive
614 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Module
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
DESC Description UC20 Undefined R/W: 2.0.0.XXX ▪ Log Changes
Admin ▪ Legal
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
INSTALLED Installed ENUM16 01 No (0) Yes/No Option R/O: 2.0.0.XXX Legal
0 - No (208) Admin; Engineer;
1 - Yes Meas. Tech;
Operator;
Auditor
MOD_MODE Module Mode ENUM16 Not Installed (0) Module Mode R/O: 2.0.0.XXX Legal
0 - Not Installed (143) Admin; Engineer;
1 - Boot Meas. Tech;
2 - Normal Operator;
3 - Not Licensed Auditor
4 - Communication Failure
5 - Module Failure
6 - Power Off
7 - Termination Missing
MOD_TYPE Module Type ENUM16 Unknown (0) Module Type R/O: 2.0.0.XXX Legal
0 - Unknown (209) Admin; Engineer;
1 - HMI Meas. Tech;
2 - On-Board I/O Operator;
3 - Optional I/O Auditor
4 - Expanded I/O
5 - I/O Cards
254 – I/O Scan CPU
255 - Main CPU
Object Parameter Listing 615
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Module
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
SUBTYPE Module Subtype ENUM16 None (0) Module R/O: 2.0.0.XXX Legal
0 - None Subtype (210) Admin; Engineer;
1 - 8AIDIPI 2AO 2DO Meas. Tech;
Operator;
Auditor
HW_SER_NUM Serial Number UC30 Undefined R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator;
Auditor
HW_TEST_DATE Hardware Test Date Time 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator;
Auditor
APP_DESC Firmware Description UC20 Undefined R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator;
Auditor
APP_SER_NUM Firmware Serial Number UC30 Undefined R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator;
Auditor
APP_PART_NUM Firmware Part Number UC20 Undefined R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator;
Auditor
616 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Module
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
APP_VER Firmware Version UC20 Undefined R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator;
Auditor
APP_DATE Firmware Creation Date Time 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator;
Auditor
BOOT_PART_NUM Boot Part Number UC20 Undefined R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator;
Auditor
BOOT_VER Boot Version UC20 Undefined R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator;
Auditor
BOOT_DATE Boot Creation Date Time Undefined R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator;
Auditor
CFG_OPT_1 Configuration Option 1 ENUM16 Not Applicable (0) Option Not R/O: 2.0.0.XXX Legal
0 - Not Applicable Applicable Admin; Engineer;
(211) Meas. Tech;
Operator;
Auditor
Object Parameter Listing 617
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Module
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
CFG_OPT_2 Configuration Option 2 ENUM16 Not Applicable (0) Option Not R/O: 2.0.0.XXX Legal
0 - Not Applicable Applicable Admin; Engineer;
(211) Meas. Tech;
Operator;
Auditor
CFG_STR_1 Configuration String 1 UC40 Undefined R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator;
Auditor
CFG_STR_2 Configuration String 2 UC40 Undefined R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator;
Auditor
CFG_STR_3 Configuration String 3 UC40 Undefined R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator;
Auditor
SET_UINT64_1 UINT64 Setting 1 UInt64 0 R/W: 2.0.0.XXX Instance:
Admin; Engineer; 1=Legal
Meas. Tech 2=Log Changes & Legal
R/O: 3-5=Legal
Operator;
Auditor
SET_ENUM16_1 ENUM16 Setting 1 ENUM16 Not Applicable (0) Option Not R/W: 2.0.0.XXX Instance:
0 - Not Applicable Applicable Admin; Engineer; 1-4=Legal
(211) Meas. Tech 5=Log Changes & Legal
R/O:
618 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Module
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Operator;
Auditor
IFS_PART_NUM IFS Part Number UC20 Undefined R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator;
Auditor
IFS_VER IFS Version UC20 Undefined R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator;
Auditor
IFS_DATE IFS Creation Date Time Undefined R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator;
Auditor
PM_STATUS Personality Module Status BIN16 Module inserted and Personality R/O: 2.0.0.XXX Legal
0 - Module inserted and valid valid Module Status Admin; Engineer;
1 - Module not present (288) Meas. Tech;
2 - Module not valid for I/O Operator;
module Auditor
3 - Module not calibrated
4 - Module EEPROM data
corrupted
PM_TYPE Personality Module Type ENUM16 Invalid personality Personality R/O: 2.0.0.XXX Legal
0 - Invalid personality board board type (0) Module Type Admin; Engineer;
type (289) Meas. Tech;
1 - CPU Personality Module Operator;
2 - CPU PM with WIFI Auditor
Object Parameter Listing 619
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Module
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
3-9: Undefined
10 - 12 point mixed I/O PM
11 - 10 point DI/DO PM
12 - 8 point AI/DI/PI PM
13 - 8 point AO/DO PM
PM_SER_NUM Personality Module Serial UC30 Undefined R/O: 2.0.0.XXX Legal
Number Admin; Engineer;
Meas. Tech;
Operator;
Auditor
PM_CAL_DATE Personality Module TIME Undefined R/O: 2.0.0.XXX Legal
Calibration Date Admin; Engineer;
Meas. Tech;
Operator;
Auditor
FPGA_VERSION FPGA Program Version UC10 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator;
Auditor
620 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.52 Mtr Setup Parameters
Description: The Mtr Setup object provides the parameters for configuring general meter run parameters.
Number of Instances: 1 instance may exist.
Storage Location: Saved to internal configuration memory.
Table 5-51: Mtr Setup Parameters
Mtr Setup
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Mtr Setup_1 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 Meter Setup R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
MAX_MTRS Maximum Meters UINT8 1 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
Object Parameter Listing 621
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Mtr Setup
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
NGAS_CALCS Natural Gas Calculations ENUM16 01 Not Available (0) Calc R/O: 2.0.0.XXX Legal
Availability Availability Admin; Engineer;
0 - Not Available (307) Meas. Tech
1 - Available Operator; Auditor
NUM_DPMTRS Number of Gas DP Meters UINT8 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
NUM_LINMTRS Number of Gas Linear UINT8 0 R/W: 2.0.0.XXX ▪ Log Changes
Meters Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
LIQ_CALCS Liquid Calculations ENUM16 01 Not Available (0) Calc R/O: 2.3.0.XXX Legal
Availability (replaced ALOC Availability Admin; Engineer;
CALCS) (307) Meas. Tech
0 - Not Available Operator; Auditor
1 - Available
NUM_LIQ_LMTRS Nunber of Liquid Linear 2.3.0.XXX
Meters
LOG_BRK_OPT QTR Log Break Option ENUM16 02 Disabled (0) QTR Log Break R/W: 2.0.0.XXX ▪ Log Changes
0 - Disabled Options (119) Admin; Engineer; ▪ Legal
1 - Hourly Only Meas. Tech
2 - All Standard Periodic Logs R/O:
Operator; Auditor
AVG_METHOD Meter Averaging Method ENUM16 03 Flow Dependent Meter R/W: 2.0.0.XXX ▪ Log Changes
0 - Flow Dependent Linear Linear (0) Averaging Admin; Engineer; ▪ Legal
1 - Flow Dependent Method (185) Meas. Tech
Formulaic R/O:
2 - Flow Weighted Linear Operator; Auditor
3 - Flow Weighted Formulaic
622 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Mtr Setup
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
BUSY_STATUS Busy Status ENUM16 01 Idle (0) Busy Status R/O: 2.0.0.XXX Legal
0 - Idle (287) Admin; Engineer;
1 - Busy Meas. Tech
Operator; Auditor
LIQ_CALCS ENUM16 0->1 Not Available (0) Calc R/O: 2.7.0.XXX Legal
Availability Admin; Engineer;
(307) Meas. Tech
Operator; Auditor
NUM_LIQLMTRS UINT8 R/W: 2.7.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
NUM_SPARETOTS Number of Spare Totals UINT16 0->144 R/W: 2.9.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 623
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.53 PI Parameters
Description: The PI object provides the parameters for configuring pulse inputs.
Number of Instances: 248 instances may exist (8 per MIO module).
Storage Location: Saved to internal configuration memory.
Table 5-52: PI Parameters
PI
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
MOD_LOC Module Location UINT8 Varies by instance R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
CHANNEL Channel UINT8 Varies by instance R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
624 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
PI
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
DESC Description UC20 Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
SCAN_PERIOD PI Scan Period FLOAT 1 1 s (17-0) R/W: 2.0.0.XXX ▪ Log Changes
86400 Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
LOGIC_LEVEL Logic Level ENUM16 01 66 microamps (0) Logic Level R/W: 2.0.0.XXX ▪ Log Changes
0 - 66 microamps (133) Admin; Engineer; ▪ Legal
1 - 2 milliamps Meas. Tech
R/O:
Operator; Auditor
FILTER Filter Mode ENUM16 02 High Speed Filter (2) PI Filter Mode R/W: 2.0.0.XXX ▪ Log Changes
0 - Low Speed Filter (286) Admin; Engineer; ▪ Legal
1 - Medium Speed Filter Meas. Tech
2 - High Speed Filter R/O:
Operator; Auditor
USER_MODE Operation Mode ENUM16 01 Live (0) User Selection R/W: 2.0.0.XXX ▪ Log Changes
0 - Live (31) Admin; Engineer; ▪ Legal
1 - Override Meas. Tech
R/O:
Operator; Auditor
ACTUAL_MODE Actual Mode ENUM16 Live (0) Actual Mode R/O: 2.0.0.XXX Legal
0 - Live (125) Admin; Engineer;
1 - Auto Meas. Tech
2 - Auto Read Operator; Auditor
3 - Override
4 - Calibration
5 - Fault
6 - Last Good
7 - Last Hour Average
8 – Ramp to Fault Value
Object Parameter Listing 625
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
PI
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
9 – Ramp to Last Hour Avg
10 – Polling Disabled
UNITS Units ENUM16 08 ft³ (0) Volume Total R/W: 2.0.0.XXX Log Changes
0 - ft³ (9) Admin; Engineer;
1 - m³ Meas. Tech
2 - MCF R/O:
3 - (k)m³ Operator; Auditor
4 - MMCF
5 - BCF
6-L
7 - US gal
8 - bbl
UNITS_TYPE Unit Enumeration Selection ENUM16 0297 Volume Total (9) PI Units Type R/W: 2.0.0.XXX Log Changes
0 - Unitless (180) Admin; Engineer;
9 - Volume Total Meas. Tech
10 - Mass Total R/O:
24 – Frequency Operator; Auditor
296 – Liquid Volume Total
297 – Water Volume Total
CONV_FACTOR Conversion Factor FLOAT 0.001 1 Pulses/EU R/W: 2.0.0.XXX Log Changes
(139-0) Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
CONTRACT_HR Contract Hour UINT8 023 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
LIVE_FREQ Live Frequency FLOAT 0 Hz (24-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
OVRD_FREQ Override Frequency FLOAT 0 0 Hz (24-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
626 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
PI
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
R/O:
Operator; Auditor
SELECTED_FREQ Selected Frequency FLOAT 0 Hz (24-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PERIOD Period FLOAT 0 s (17-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
RATE_PERIOD Rate Period ENUM16 03 Seconds (0) PI Rate Period R/W: 2.0.0.XXX Log Changes
0 - Seconds (140) Admin; Engineer;
1 - Minutes Meas. Tech
2 - Hours R/O:
3 - Days Operator; Auditor
RATE Rate FLOAT 0 ft³/s (12-0) R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
PULSE_ACCUM Accumulated Pulses UINT32 0 Pulses (141-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
PULSE_DAY_ACCU Today's Accumulated Pulses UINT32 0 Pulses (141-0) R/O: 2.0.0.XXX
M_32 (32-bit) Admin; Engineer;
Meas. Tech
Operator; Auditor
PULSE_DAY_ACCU Today's Accumulated Pulses UInt64 0 Pulses (141-0) R/O: 2.0.0.XXX
M_64 (64-bit) Admin; Engineer;
Meas. Tech
Operator; Auditor
TODAYS_TOTAL Today's Total DOUBLE 0 ft³ (9-0) R/O: 2.0.0.XXX
Admin; Engineer;
Object Parameter Listing 627
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
PI
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
Operator; Auditor
YESTERDAYS_TOTA Yesterday's Total DOUBLE 0 ft³ (9-0) R/O: 2.0.0.XXX
L Admin; Engineer;
Meas. Tech
Operator; Auditor
RESET_TOTAL_ Reset the PI Counts ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX ▪ Log Changes
COUNTS 0 - Disable Selection (30) Admin; Engineer; ▪ Legal
1 - Enable Meas. Tech ▪ Verified
R/O:
Operator; Auditor
URL Upper Range Limit FLOAT 0 Hz (24-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
LRL Lower Range Limit FLOAT 0 Hz (24-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
MONITOR_MAX Monitor Maximum FLOAT 10000 Hz (24-0) R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
MONITOR_MIN Monitor Minimum FLOAT 0 Hz (24-0) R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
FREQ_ALM_OBJ Frequency Alarm Reference ObjectRef Varies by instance R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
INPUT_STATUS Input Health Status BIN16 Normal PI Status (142) R/O: 2.0.0.XXX Legal
0 - Normal Admin; Engineer;
628 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
PI
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
1 - Not Licensed Meas. Tech
2 - Instance Inactive Operator; Auditor
3 - Comm Fail
4 - Override Active
5 - In Alarm
6 - Point Fail
7 - Above URL
8 - Below LRL
9 - Termination Missing
10 - Hardware Fail
RESISTOR_TYPE Pull up or Pull down Resistor ENUM16 01 Pull Up (0) DI/PI Resistor R/W: 2.0.0.XXX ▪ Log Changes
type Selection (276) Admin; Engineer; ▪ Legal
0 - Pull Up Meas. Tech
1 - Pull Down R/O:
Operator; Auditor
RST_PULSE_ACCUM Resettable Accumulated UINT32 Pulses (141) R/W: 2.12.0.XXX ▪ Log Changes
Pulses Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 629
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.54 PID Parameters
Description: The PID object provides the parameters for configuring Proportional, Integral, and Derivative control
loops.
Number of Instances: Between 0 and 100 instances may exist; by default, 24 exist.
Storage Location: Saved to internal configuration memory.
Table 5-53: PID Parameters
PID
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX Log Changes
“PID Loop_X” Admin; Engineer;
(where X is instance Meas. Tech
number between 1 R/O:
and 100) Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 Instance: R/W: 2.0.0.XXX Log Changes
“PID Loop_X” Admin; Engineer;
(where X is instance Meas. Tech
number between 1 R/O:
and 100) Operator; Auditor
630 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
PID
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
PID_LOOP_TYPE PID Loop Type ENUM16 02 Primary Only (0) PID Control R/W: 2.0.0.XXX Log Changes
0 - Primary Only Type (112) Admin; Engineer;
1 - Override Only Meas. Tech
2 - Dual Control R/O:
Operator; Auditor
PID_ENABLE Enable Switch ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX Log Changes
0 - Disable Selection (30) Admin; Engineer;
1 - Enable Meas. Tech
R/O:
Operator; Auditor
LOOP_PERIOD Loop Period FLOAT 1 1 s (17-0) R/W: 2.0.0.XXX Log Changes
3600 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
P_PV_POINT Primary Process Variable ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Input Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
P_PROCESS_ Primary Process Variable FLOAT 0 R/O: 2.0.0.XXX
VARIABLE Value Admin; Engineer;
Meas. Tech
Operator; Auditor
P_PV_HIGH_LIMIT Primary Process Variable FLOAT 0 10000 R/W: 2.0.0.XXX Log Changes
High Limit Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
P_PV_LOW_LIMIT Primary Process Variable FLOAT 0 0 R/W: 2.0.0.XXX Log Changes
Low Limit Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 631
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
PID
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
P_CONTROL_ Primary Control Action ENUM16 01 Reverse (1) PID Control R/W: 2.0.0.XXX Log Changes
ACTION Direction Action (114) Admin; Engineer;
0 - Forward Meas. Tech
1 - Reverse R/O:
Operator; Auditor
P_SETPOINT_TRACK Primary Setpoint Tracking ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX Log Changes
_EN 0 - Disable Selection (30) Admin; Engineer;
1 - Enable Meas. Tech
R/O:
Operator; Auditor
P_SETPOINT_POINT Primary Setpoint Input ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
P_SETPOINT Primary Setpoint Value FLOAT 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech;
Operator
R/O:
Auditor
P_SETPOINT_RAMP Primary Setpoint Ramp Rate FLOAT 0 0 R/W: 2.0.0.XXX Log Changes
Per Second Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
P_PROPORTIONAL_ Primary Proportional Gain FLOAT 0 0.5 R/W: 2.0.0.XXX Log Changes
G Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
P_INTEGRAL_GAIN Primary Integral Gain FLOAT 0 4 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
632 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
PID
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
P_DERIVATIVE_GAI Primary Derivative Gain FLOAT 0 0 R/W: 2.0.0.XXX Log Changes
N Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
P_CHANGE_IN_ Primary Change In Output FLOAT 0 R/O: 2.0.0.XXX
OUTPUT Admin; Engineer;
Meas. Tech
Operator; Auditor
P_CONTROL_ Primary Control Deadband FLOAT 0 0 R/W: 2.0.0.XXX Log Changes
DEADBAND Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
O_PV_POINT Override Process Variable ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
O_PROCESS_ Override Process Variable FLOAT 0 R/O: 2.0.0.XXX
VARIABLE Value Admin; Engineer;
Meas. Tech
Operator; Auditor
O_PV_HIGH_LIMIT Override Process Variable FLOAT 0 10000 R/W: 2.0.0.XXX Log Changes
High Limit Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
O_PV_LOW_LIMIT Override Process Variable FLOAT 0 0 R/W: 2.0.0.XXX Log Changes
Low Limit Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 633
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
PID
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
O_CONTROL_ Override Control Action ENUM16 01 Reverse (1) PID Control R/W: 2.0.0.XXX Log Changes
ACTION Direction Action (114) Admin; Engineer;
0 - Forward Meas. Tech
1 - Reverse R/O:
Operator; Auditor
O_SETPOINT_ Override Setpoint Tracking ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX Log Changes
TRACK_EN 0 - Disable Selection (30) Admin; Engineer;
1 - Enable Meas. Tech
R/O:
Operator; Auditor
O_SETPOINT_POIN Override Setpoint Input ParamRef Undefined R/W: 2.0.0.XXX Log Changes
T Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
O_SETPOINT Override Setpoint Value FLOAT 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech;
Operator
R/O:
Auditor
O_SETPOINT_RAMP Override Setpoint Ramp Rate FLOAT 0 0 R/W: 2.0.0.XXX Log Changes
Per Second Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
O_PROPORTIONAL_ Override Proportional Gain FLOAT 0 0.5 R/W: 2.0.0.XXX Log Changes
G Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
O_INTEGRAL_GAIN Override Integral Gain FLOAT 0 4 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
634 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
PID
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
O_DERIVATIVE_GAI Override Derivative Gain FLOAT 0 0 R/W: 2.0.0.XXX Log Changes
N Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
O_CHANGE_IN_ Override Change In Output FLOAT 0 R/O: 2.0.0.XXX
OUTPUT Admin; Engineer;
Meas. Tech
Operator; Auditor
O_CONTROL_ Override Control Deadband FLOAT 0 0 R/W: 2.0.0.XXX Log Changes
DEADBAND Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SWITCH_SELECT Override Type Select ENUM16 01 Low (0) Override Type R/W: 2.0.0.XXX Log Changes
0 - Low Select (258) Admin; Engineer;
1 - High Meas. Tech
R/O:
Operator; Auditor
OVERRIDE_ Override Threshold Value FLOAT 0 0 R/W: 2.0.0.XXX Log Changes
THRESHOLD Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OUTPUT_TYPE Output Type ENUM16 01 Analog (0) PID Output R/W: 2.0.0.XXX Log Changes
0 - Analog Type (113) Admin; Engineer;
1 - Discrete Meas. Tech
R/O:
Operator; Auditor
ANALOG_OUT_ Analog Output Point ParamRef Undefined R/W: 2.0.0.XXX Log Changes
POINT Admin; Engineer;
Meas. Tech
Object Parameter Listing 635
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
PID
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
DIGITAL_OUT_ Digital Output Point 1 (Raise) ParamRef Undefined R/W: 2.0.0.XXX Log Changes
POINT1 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DIGITAL_OUT_ Digital Output Point 2 ParamRef Undefined R/W: 2.0.0.XXX Log Changes
POINT2 (Lower) Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OUTPUT_SLEW_ Output Ramp Rate Per FLOAT 0 0 R/W: 2.0.0.XXX Log Changes
RATE Second Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
CLAMP_ENABLE Output Clamping Mode ENUM16 01 Enable (1) Enable/Disable R/W: 2.0.0.XXX Log Changes
0 - Disable Selection (30) Admin; Engineer;
1 - Enable Meas. Tech
R/O:
Operator; Auditor
CLAMP_HIGH_LIMI Output Clamping High Limit FLOAT 0 100 R/W: 2.0.0.XXX Log Changes
T Value Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
CLAMP_LOW_LIMIT Output Clamping Low Limit FLOAT 0 0 R/W: 2.0.0.XXX Log Changes
Value Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OUTPUT_VALUE Current Output of PID FLOAT 0 R/O: 2.0.0.XXX
Admin; Engineer;
636 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
PID
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
Operator; Auditor
OUTPUT_MODE Output Mode ENUM16 01 Manual (0) Output Mode R/W: 2.0.0.XXX Log Changes
0 - Manual (47) Admin; Engineer;
1 - Auto Meas. Tech;
Operator
R/O:
Auditor
MANUAL_POSITIO Manual Position % (In FLOAT 0 % (18-0) R/W: 2.0.0.XXX
N Manual Mode) Admin; Engineer;
Meas. Tech;
Operator
R/O:
Auditor
RESUME_ON_RESET Resume PID Control On ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX Log Changes
System Restart Selection (30) Admin; Engineer;
0 - Disable Meas. Tech
1 - Enable R/O:
Operator; Auditor
ACTION_ON_ Action Of Output On Data ENUM16 01 Manual Mode (1) PID Action On R/W: 2.0.0.XXX Log Changes
QUALITY Quality Unhealthy Admin; Engineer;
0 - Continue Data (118) Meas. Tech
1 - Manual Mode R/O:
Operator; Auditor
SELECTED_LOOP Selected Loop ENUM16 Disabled (0) PID Selected R/O: 2.0.0.XXX
0 - Disabled Loop (116) Admin; Engineer;
1 - Primary Meas. Tech;
2 - Override Operator; Auditor
Object Parameter Listing 637
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.55 PollTable Parameters
Description: The PollTable object provides the parameters for configuring a specific Modbus poll table.
Number of Instances: 36 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-54: PollTable Parameters
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Polling Table R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
N/A:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
N/A:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure N/A:
3 - Override Operator; Auditor
4 - Inactive
COMM_PORT_TYPE Comm Port Type UC20 Instance: R/O: 2.0.0.XXX
1-6=Serial Port 1 (0) Admin; Engineer;
7-12=Serial Port 2 Meas. Tech;
(1) Operator
13-18=Serial Port 3 N/A:
(2) Auditor
19-24=Serial Port 4
(3)
25-30=Ethernet Port
638 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
1 (4)
31-36=Ethernet Port
2 (5)
COMM_PORT_NUM Comm Port Number ENUM16 Instance: Comm Port R/O: 2.0.0.XXX
0 - Serial Port 1 1-6=Serial Port 1 (0) Instance (302) Admin; Engineer;
1 - Serial Port 2 7-12=Serial Port 2 Meas. Tech:
2 - Serial Port 3 (1) Operator
3 - Serial Port 4 13-18=Serial Port 3 N/A:
4 - Ethernet Port 1 (2) Auditor
5 - Ethernet Port 2 19-24=Serial Port 4
(3)
25-30=Ethernet Port
1 (4)
31-36=Ethernet Port
2 (5)
POLL_TABLE_TAG Poll Table Identification Tag UC20 Instance: R/W: 2.0.0.XXX Log Changes
1-6=PollTbl1 Admin; Engineer;
(Comm_1) Meas. Tech
7-12=PollTbl7 R/O:
(Comm_2) Operator
13-18=PollTbl13 N/A:
(Comm_3) Auditor
19-24=PollTbl19
(Comm_4)
25-30=PollTbl25
(Comm_5)
31-36=PollTbl31
(Comm_6)
SERVER_IP_ADD_1 Slave Server IP Address for ByteArray Undefined R/W: 2.0.0.XXX Log Changes
Request 1 4 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
Object Parameter Listing 639
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
SERVER_PORT_NO_ Slave Server Port Number for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
1 Request 1 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
RTU_ADD_1 Slave Address for Request 1 UINT8 0255 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
FUNC_CODE_1 Function code for Request 1 ENUM16 Polling Disabled (0) Function Code R/W: 2.0.0.XXX Log Changes
0 - Polling Disabled (161) Admin; Engineer;
1 - Read Coil Status Meas. Tech
2 - Read Input Status R/O:
3 - Read Holding Registers Operator
4 - Read Input Registers N/A:
5 - Force Single Coil Auditor
6 - Set Single Register
15 - Force Multiple Coils
16 - Set Multiple Registers
SLAVE_REG_1 Starting Slave Register in UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 1 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
NUM_REG_1 Number of Registers for UINT16 1120 1 R/W: 2.0.0.XXX Log Changes
Request 1 Admin; Engineer;
Meas. Tech
R/O:
640 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Operator
N/A:
Auditor
MASTER_REG_1 Starting Master Register for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 1 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
COMM_STATUS_1 Comm Status for Request 1 UINT8 0 Inactive or R/O: 2.0.0.XXX
Start of Admin; Engineer;
Transmission Meas. Tech
(162-0) Operator
N/A:
Auditor
SERVER_IP_ADD_2 Slave Server IP Address for ByteArray Undefined R/W: 2.0.0.XXX Log Changes
Request 2 4 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
SERVER_PORT_NO_ Slave Server Port Number for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
2 Request 2 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
RTU_ADD_2 Slave Address for Request 2 UINT8 0255 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
Object Parameter Listing 641
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
N/A:
Auditor
FUNC_CODE_2 Function code for Request 2 ENUM16 Polling Disabled (0) Function Code R/W: 2.0.0.XXX Log Changes
0 - Polling Disabled (161) Admin; Engineer;
1 - Read Coil Status Meas. Tech
2 - Read Input Status R/O:
3 - Read Holding Registers Operator
4 - Read Input Registers N/A:
5 - Force Single Coil Auditor
6 - Set Single Register
15 - Force Multiple Coils
16 - Set Multiple Registers
SLAVE_REG_2 Starting Slave Register in UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 2 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
NUM_REG_2 Number of Registers for UINT16 1120 1 R/W: 2.0.0.XXX Log Changes
Request 2 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
MASTER_REG_2 Starting Master Register for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 2 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
COMM_STATUS_2 Comm Status for Request 2 UINT8 0 Inactive or R/O: 2.0.0.XXX
Start of Admin; Engineer;
642 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Transmission Meas. Tech
(162-0) Operator
N/A:
Auditor
SERVER_IP_ADD_3 Slave Server IP Address for ByteArray Undefined R/W: 2.0.0.XXX Log Changes
Request 3 4 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
SERVER_PORT_NO_ Slave Server Port Number for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
3 Request 3 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
RTU_ADD_3 Slave Address for Request 3 UINT8 0255 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
FUNC_CODE_3 Function code for Request 3 ENUM16 Polling Disabled (0) Function Code R/W: 2.0.0.XXX Log Changes
0 - Polling Disabled (161) Admin; Engineer;
1 - Read Coil Status Meas. Tech
2 - Read Input Status R/O:
3 - Read Holding Registers Operator
4 - Read Input Registers N/A:
5 - Force Single Coil Auditor
6 - Set Single Register
15 - Force Multiple Coils
16 - Set Multiple Registers
Object Parameter Listing 643
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
SLAVE_REG_3 Starting Slave Register in UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 3 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
NUM_REG_3 Number of Registers for UINT16 1120 1 R/W: 2.0.0.XXX Log Changes
Request 3 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
MASTER_REG_3 Starting Master Register for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 3 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
COMM_STATUS_3 Comm Status for Request 3 UINT8 0 Inactive or R/O: 2.0.0.XXX
Start of Admin; Engineer;
Transmission Meas. Tech;
(162-0) Operator
N/A:
Auditor
SERVER_IP_ADD_4 Slave Server IP Address for ByteArray Undefined R/W: 2.0.0.XXX Log Changes
Request 4 4 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
644 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
SERVER_PORT_NO_ Slave Server Port Number for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
4 Request 4 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
RTU_ADD_4 Slave Address for Request 4 UINT8 0255 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
FUNC_CODE_4 Function code for Request 4 ENUM16 Polling Disabled (0) Function Code R/W: 2.0.0.XXX Log Changes
0 - Polling Disabled (161) Admin; Engineer;
1 - Read Coil Status Meas. Tech
2 - Read Input Status R/O:
3 - Read Holding Registers Operator
4 - Read Input Registers N/A:
5 - Force Single Coil Auditor
6 - Set Single Register
15 - Force Multiple Coils
16 - Set Multiple Registers
SLAVE_REG_4 Starting Slave Register in UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 4 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
NUM_REG_4 Number of Registers for UINT16 1120 1 R/W: 2.0.0.XXX Log Changes
Request 4 Admin; Engineer;
Meas. Tech
R/O:
Object Parameter Listing 645
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Operator
N/A:
Auditor
MASTER_REG_4 Starting Master Register for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 4 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
COMM_STATUS_4 Comm Status for Request 4 UINT8 0 Inactive or R/O: 2.0.0.XXX
Start of Admin; Engineer;
Transmission Meas. Tech;
(162-0) Operator
N/A:
Auditor
SERVER_IP_ADD_5 Slave Server IP Address for ByteArray Undefined R/W: 2.0.0.XXX Log Changes
Request 5 4 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
SERVER_PORT_NO_ Slave Server Port Number for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
5 Request 5 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
RTU_ADD_5 Slave Address for Request 5 UINT8 0255 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
646 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
N/A:
Auditor
FUNC_CODE_5 Function code for Request 5 ENUM16 Polling Disabled (0) Function Code R/W: 2.0.0.XXX Log Changes
0 - Polling Disabled (161) Admin; Engineer;
1 - Read Coil Status Meas. Tech
2 - Read Input Status R/O:
3 - Read Holding Registers Operator
4 - Read Input Registers N/A:
5 - Force Single Coil Auditor
6 - Set Single Register
15 - Force Multiple Coils
16 - Set Multiple Registers
SLAVE_REG_5 Starting Slave Register in UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 5 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
NUM_REG_5 Number of Registers for UINT16 1120 1 R/W: 2.0.0.XXX Log Changes
Request 5 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
MASTER_REG_5 Starting Master Register for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 5 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
COMM_STATUS_5 Comm Status for Request 5 UINT8 0 Inactive or R/O: 2.0.0.XXX
Start of Admin; Engineer;
Object Parameter Listing 647
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Transmission Meas. Tech;
(162-0) Operator
N/A:
Auditor
SERVER_IP_ADD_6 Slave Server IP Address for ByteArray4 Undefined R/W: 2.0.0.XXX Log Changes
Request 6 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
SERVER_PORT_NO_ Slave Server Port Number for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
6 Request 6 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
RTU_ADD_6 Slave Address for Request 6 UINT8 0 -> 255 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
FUNC_CODE_6 Function code for Request 6 ENUM16 Polling Disabled (0) Function Code R/W: 2.0.0.XXX Log Changes
0 - Polling Disabled (161) Admin; Engineer;
1 - Read Coil Status Meas. Tech
2 - Read Input Status R/O:
3 - Read Holding Registers Operator
4 - Read Input Registers N/A:
5 - Force Single Coil Auditor
6 - Set Single Register
15 - Force Multiple Coils
16 - Set Multiple Registers
648 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
SLAVE_REG_6 Starting Slave Register in UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 6 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
NUM_REG_6 Number of Registers for UINT16 1120 1 R/W: 2.0.0.XXX Log Changes
Request 6 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
MASTER_REG_6 Starting Master Register for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 6 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
COMM_STATUS_6 Comm Status for Request 6 UINT8 0 Inactive or R/O: 2.0.0.XXX
Start of Admin; Engineer;
Transmission Meas. Tech;
(162-0) Operator
N/A:
Auditor
SERVER_IP_ADD_7 Slave Server IP Address for ByteArray4 Undefined R/W: 2.0.0.XXX Log Changes
Request 7 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
Object Parameter Listing 649
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
SERVER_PORT_NO_ Slave Server Port Number for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
7 Request 7 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
RTU_ADD_7 Slave Address for Request 7 UINT8 0255 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
FUNC_CODE_7 Function code for Request 7 ENUM16 Polling Disabled (0) Function Code R/W: 2.0.0.XXX Log Changes
0 - Polling Disabled (161) Admin; Engineer;
1 - Read Coil Status Meas. Tech
2 - Read Input Status R/O:
3 - Read Holding Registers Operator
4 - Read Input Registers N/A:
5 - Force Single Coil Auditor
6 - Set Single Register
15 - Force Multiple Coils
16 - Set Multiple Registers
SLAVE_REG_7 Starting Slave Register in UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 7 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
NUM_REG_7 Number of Registers for UINT16 1120 1 R/W: 2.0.0.XXX Log Changes
Request 7 Admin; Engineer;
Meas. Tech
R/O:
650 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Operator
N/A:
Auditor
MASTER_REG_7 Starting Master Register for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 7 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
COMM_STATUS_7 Comm Status for Request 7 UINT8 0 Inactive or R/O: 2.0.0.XXX
Start of Admin; Engineer;
Transmission Meas. Tech;
(162-0) Operator
N/A:
Auditor
SERVER_IP_ADD_8 Slave Server IP Address for ByteArray4 Undefined R/W: 2.0.0.XXX Log Changes
Request 8 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
SERVER_PORT_NO_ Slave Server Port Number for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
8 Request 8 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
RTU_ADD_8 Slave Address for Request 8 UINT8 0255 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
Object Parameter Listing 651
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
N/A:
Auditor
FUNC_CODE_8 Function code for Request 8 ENUM16 Polling Disabled (0) Function Code R/W: 2.0.0.XXX Log Changes
0 - Polling Disabled (161) Admin; Engineer;
1 - Read Coil Status Meas. Tech
2 - Read Input Status R/O:
3 - Read Holding Registers Operator
4 - Read Input Registers N/A:
5 - Force Single Coil Auditor
6 - Set Single Register
15 - Force Multiple Coils
16 - Set Multiple Registers
SLAVE_REG_8 Starting Slave Register in UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 8 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
NUM_REG_8 Number of Registers for UINT16 1120 1 R/W: 2.0.0.XXX Log Changes
Request 8 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
MASTER_REG_8 Starting Master Register for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 8 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
COMM_STATUS_8 Comm Status for Request 8 UINT8 0 Inactive or R/O: 2.0.0.XXX
Start of Admin; Engineer;
652 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Transmission Meas. Tech;
(162-0) Operator
N/A:
Auditor
SERVER_IP_ADD_9 Slave Server IP Address for ByteArray4 Undefined R/W: 2.0.0.XXX Log Changes
Request 9 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
SERVER_PORT_NO_ Slave Server Port Number for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
9 Request 9 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
RTU_ADD_9 Slave Address for Request 9 UINT8 0255 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
FUNC_CODE_9 Function code for Request 9 ENUM16 Polling Disabled (0) Function Code R/W: 2.0.0.XXX Log Changes
0 - Polling Disabled (161) Admin; Engineer;
1 - Read Coil Status Meas. Tech
2 - Read Input Status R/O:
3 - Read Holding Registers Operator
4 - Read Input Registers N/A:
5 - Force Single Coil Auditor
6 - Set Single Register
15 - Force Multiple Coils
16 - Set Multiple Registers
Object Parameter Listing 653
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
SLAVE_REG_9 Starting Slave Register in UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 9 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
NUM_REG_9 Number of Registers for UINT16 1120 1 R/W: 2.0.0.XXX Log Changes
Request 9 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
MASTER_REG_9 Starting Master Register for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 9 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
COMM_STATUS_9 Comm Status for Request 9 UINT8 0 Inactive or R/O: 2.0.0.XXX
Start of Admin; Engineer;
Transmission Meas. Tech;
(162-0) Operator
N/A:
Auditor
SERVER_IP_ADD_10 Slave Server IP Address for ByteArray4 Undefined R/W: 2.0.0.XXX Log Changes
Request 10 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
654 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
SERVER_PORT_NO_ Slave Server Port Number for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
10 Request 10 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
RTU_ADD_10 Slave Address for Request 10 UINT8 0255 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
FUNC_CODE_10 Function code for Request 10 ENUM16 Polling Disabled (0) Function Code R/W: 2.0.0.XXX Log Changes
0 - Polling Disabled (161) Admin; Engineer;
1 - Read Coil Status Meas. Tech
2 - Read Input Status R/O:
3 - Read Holding Registers Operator
4 - Read Input Registers N/A:
5 - Force Single Coil Auditor
6 - Set Single Register
15 - Force Multiple Coils
16 - Set Multiple Registers
SLAVE_REG_10 Starting Slave Register in UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 10 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
NUM_REG_10 Number of Registers for UINT16 1120 1 R/W: 2.0.0.XXX Log Changes
Request 10 Admin; Engineer;
Meas. Tech
R/O:
Object Parameter Listing 655
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Operator
N/A:
Auditor
MASTER_REG_10 Starting Master Register for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 10 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
COMM_STATUS_10 Comm Status for Request 10 UINT8 0 Inactive or R/O: 2.0.0.XXX
Start of Admin; Engineer;
Transmission Meas. Tech;
(162-0) Operator
N/A:
Auditor
SERVER_IP_ADD_11 Slave Server IP Address for ByteArray4 Undefined R/W: 2.0.0.XXX Log Changes
Request 11 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
SERVER_PORT_NO_ Slave Server Port Number for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
11 Request 11 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
RTU_ADD_11 Slave Address for Request 11 UINT8 0255 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
656 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
N/A:
Auditor
FUNC_CODE_11 Function code for Request 11 ENUM16 Polling Disabled (0) Function Code R/W: 2.0.0.XXX Log Changes
0 - Polling Disabled (161) Admin; Engineer;
1 - Read Coil Status Meas. Tech
2 - Read Input Status R/O:
3 - Read Holding Registers Operator
4 - Read Input Registers N/A:
5 - Force Single Coil Auditor
6 - Set Single Register
15 - Force Multiple Coils
16 - Set Multiple Registers
SLAVE_REG_11 Starting Slave Register in UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 11 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
NUM_REG_11 Number of Registers for UINT16 1120 1 R/W: 2.0.0.XXX Log Changes
Request 11 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
MASTER_REG_11 Starting Master Register for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 11 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
COMM_STATUS_11 Comm Status for Request 11 UINT8 0 Inactive or R/O: 2.0.0.XXX
Start of Admin; Engineer;
Object Parameter Listing 657
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Transmission Meas. Tech;
(162-0) Operator
N/A:
Auditor
SERVER_IP_ADD_12 Slave Server IP Address for ByteArray4 Undefined R/W: 2.0.0.XXX Log Changes
Request 12 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
SERVER_PORT_NO_ Slave Server Port Number for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
12 Request 12 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
RTU_ADD_12 Slave Address for Request 12 UINT8 0255 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
FUNC_CODE_12 Function code for Request 12 ENUM16 Polling Disabled (0) Function Code R/W: 2.0.0.XXX Log Changes
0 - Polling Disabled (161) Admin; Engineer;
1 - Read Coil Status Meas. Tech
2 - Read Input Status R/O:
3 - Read Holding Registers Operator
4 - Read Input Registers N/A:
5 - Force Single Coil Auditor
6 - Set Single Register
15 - Force Multiple Coils
16 - Set Multiple Registers
658 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
SLAVE_REG_12 Starting Slave Register in UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 12 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
NUM_REG_12 Number of Registers for UINT16 1120 1 R/W: 2.0.0.XXX Log Changes
Request 12 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
MASTER_REG_12 Starting Master Register for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 12 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
COMM_STATUS_12 Comm Status for Request 12 UINT8 0 Inactive or R/O: 2.0.0.XXX
Start of Admin; Engineer;
Transmission Meas. Tech;
(162-0) Operator
N/A:
Auditor
SERVER_IP_ADD_13 Slave Server IP Address for ByteArray4 Undefined R/W: 2.0.0.XXX Log Changes
Request 13 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
Object Parameter Listing 659
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
SERVER_PORT_NO_ Slave Server Port Number for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
13 Request 13 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
RTU_ADD_13 Slave Address for Request 13 UINT8 0255 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
FUNC_CODE_13 Function code for Request 13 ENUM16 Polling Disabled (0) Function Code R/W: 2.0.0.XXX Log Changes
0 - Polling Disabled (161) Admin; Engineer;
1 - Read Coil Status Meas. Tech
2 - Read Input Status R/O:
3 - Read Holding Registers Operator
4 - Read Input Registers N/A:
5 - Force Single Coil Auditor
6 - Set Single Register
15 - Force Multiple Coils
16 - Set Multiple Registers
SLAVE_REG_13 Starting Slave Register in UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 13 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
NUM_REG_13 Number of Registers for UINT16 1120 1 R/W: 2.0.0.XXX Log Changes
Request 13 Admin; Engineer;
Meas. Tech
R/O:
660 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Operator
N/A:
Auditor
MASTER_REG_13 Starting Master Register for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 13 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
COMM_STATUS_13 Comm Status for Request 13 UINT8 0 Inactive or R/O: 2.0.0.XXX
Start of Admin; Engineer;
Transmission Meas. Tech;
(162-0) Operator
N/A:
Auditor
SERVER_IP_ADD_14 Slave Server IP Address for ByteArray4 Undefined R/W: 2.0.0.XXX Log Changes
Request 14 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
SERVER_PORT_NO_ Slave Server Port Number for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
14 Request 14 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
RTU_ADD_14 Slave Address for Request 14 UINT8 0255 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
Object Parameter Listing 661
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
N/A:
Auditor
FUNC_CODE_14 Function code for Request 14 ENUM16 Polling Disabled (0) Function Code R/W: 2.0.0.XXX Log Changes
0 - Polling Disabled (161) Admin; Engineer;
1 - Read Coil Status Meas. Tech
2 - Read Input Status R/O:
3 - Read Holding Registers Operator
4 - Read Input Registers N/A:
5 - Force Single Coil Auditor
6 - Set Single Register
15 - Force Multiple Coils
16 - Set Multiple Registers
SLAVE_REG_14 Starting Slave Register in UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 14 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
NUM_REG_14 Number of Registers for UINT16 1120 1 R/W: 2.0.0.XXX Log Changes
Request 14 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
MASTER_REG_14 Starting Master Register for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 14 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
COMM_STATUS_14 Comm Status for Request 14 UINT8 0 Inactive or R/O: 2.0.0.XXX
Start of Admin; Engineer;
662 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Transmission Meas. Tech;
(162-0) Operator
N/A:
Auditor
SERVER_IP_ADD_15 Slave Server IP Address for ByteArray4 Undefined R/W: 2.0.0.XXX Log Changes
Request 15 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
SERVER_PORT_NO_ Slave Server Port Number for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
15 Request 15 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
RTU_ADD_15 Slave Address for Request 15 UINT8 0255 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
FUNC_CODE_15 Function code for Request 15 ENUM16 Polling Disabled (0) Function Code R/W: 2.0.0.XXX Log Changes
0 - Polling Disabled (161) Admin; Engineer;
1 - Read Coil Status Meas. Tech
2 - Read Input Status R/O:
3 - Read Holding Registers Operator
4 - Read Input Registers N/A:
5 - Force Single Coil Auditor
6 - Set Single Register
15 - Force Multiple Coils
16 - Set Multiple Registers
Object Parameter Listing 663
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
SLAVE_REG_15 Starting Slave Register in UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 15 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
NUM_REG_15 Number of Registers for UINT16 1120 1 R/W: 2.0.0.XXX Log Changes
Request 15 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
MASTER_REG_15 Starting Master Register for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 15 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
COMM_STATUS_15 Comm Status for Request 15 UINT8 0 Inactive or R/O: 2.0.0.XXX
Start of Admin; Engineer;
Transmission Meas. Tech;
(162-0) Operator
N/A:
Auditor
SERVER_IP_ADD_16 Slave Server IP Address for ByteArray4 Undefined R/W: 2.0.0.XXX Log Changes
Request 16 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
664 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
SERVER_PORT_NO_ Slave Server Port Number for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
16 Request 16 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
RTU_ADD_16 Slave Address for Request 16 UINT8 0255 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
FUNC_CODE_16 Function code for Request 16 ENUM16 Polling Disabled (0) Function Code R/W: 2.0.0.XXX Log Changes
0 - Polling Disabled (161) Admin; Engineer;
1 - Read Coil Status Meas. Tech
2 - Read Input Status R/O:
3 - Read Holding Registers Operator
4 - Read Input Registers N/A:
5 - Force Single Coil Auditor
6 - Set Single Register
15 - Force Multiple Coils
16 - Set Multiple Registers
SLAVE_REG_16 Starting Slave Register in UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 16 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
NUM_REG_16 Number of Registers for UINT16 1120 1 R/W: 2.0.0.XXX Log Changes
Request 16 Admin; Engineer;
Meas. Tech
R/O:
Object Parameter Listing 665
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Operator
N/A:
Auditor
MASTER_REG_16 Starting Master Register for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 16 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
COMM_STATUS_16 Comm Status for Request 16 UINT8 0 Inactive or R/O: 2.0.0.XXX
Start of Admin; Engineer;
Transmission Meas. Tech;
(162-0) Operator
N/A:
Auditor
SERVER_IP_ADD_17 Slave Server IP Address for ByteArray4 Undefined R/W: 2.0.0.XXX Log Changes
Request 17 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
SERVER_PORT_NO_ Slave Server Port Number for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
17 Request 17 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
RTU_ADD_17 Slave Address for Request 17 UINT8 0255 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
666 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
N/A:
Auditor
FUNC_CODE_17 Function code for Request 17 ENUM16 Polling Disabled (0) Function Code R/W: 2.0.0.XXX Log Changes
0 - Polling Disabled (161) Admin; Engineer;
1 - Read Coil Status Meas. Tech
2 - Read Input Status R/O:
3 - Read Holding Registers Operator
4 - Read Input Registers N/A:
5 - Force Single Coil Auditor
6 - Set Single Register
15 - Force Multiple Coils
16 - Set Multiple Registers
SLAVE_REG_17 Starting Slave Register in UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 17 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
NUM_REG_17 Number of Registers for UINT16 1120 1 R/W: 2.0.0.XXX Log Changes
Request 17 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
MASTER_REG_17 Starting Master Register for UINT16 0 0 R/W: Log Changes
Request 17 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
Object Parameter Listing 667
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
COMM_STATUS_17 Comm Status for Request 17 UINT8 0 Inactive or R/O: 2.0.0.XXX
Start of Admin; Engineer;
Transmission Meas. Tech;
(162-0) Operator
N/A:
Auditor
SERVER_IP_ADD_18 Slave Server IP Address for ByteArray4 Undefined R/W: 2.0.0.XXX Log Changes
Request 18 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
SERVER_PORT_NO_ Slave Server Port Number for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
18 Request 18 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
RTU_ADD_18 Slave Address for Request 18 UINT8 0255 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
FUNC_CODE_18 Function code for Request 18 ENUM16 Polling Disabled (0) Function Code R/W: 2.0.0.XXX Log Changes
0 - Polling Disabled (161) Admin; Engineer;
1 - Read Coil Status Meas. Tech
2 - Read Input Status R/O:
3 - Read Holding Registers Operator
4 - Read Input Registers N/A:
5 - Force Single Coil Auditor
6 - Set Single Register
668 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
15 - Force Multiple Coils
16 - Set Multiple Registers
SLAVE_REG_18 Starting Slave Register in UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 18 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
NUM_REG_18 Number of Registers for UINT16 1120 1 R/W: 2.0.0.XXX Log Changes
Request 18 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
MASTER_REG_18 Starting Master Register for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 18 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
COMM_STATUS_18 Comm Status for Request 18 UINT8 0 Inactive or R/O: 2.0.0.XXX
Start of Admin; Engineer;
Transmission Meas. Tech;
(162-0) Operator
N/A:
Auditor
SERVER_IP_ADD_19 Slave Server IP Address for ByteArray4 Undefined R/W: 2.0.0.XXX Log Changes
Request 19 Admin; Engineer;
Meas. Tech
R/O:
Operator
Object Parameter Listing 669
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
N/A:
Auditor
SERVER_PORT_NO_ Slave Server Port Number for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
19 Request 19 65535
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
RTU_ADD_19 Slave Address for Request 19 UINT8 0255 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
FUNC_CODE_19 Function code for Request 19 ENUM16 Polling Disabled (0) Function Code R/W: 2.0.0.XXX Log Changes
0 - Polling Disabled (161) Admin; Engineer;
1 - Read Coil Status Meas. Tech
2 - Read Input Status R/O:
3 - Read Holding Registers Operator
4 - Read Input Registers N/A:
5 - Force Single Coil Auditor
6 - Set Single Register
15 - Force Multiple Coils
16 - Set Multiple Registers
SLAVE_REG_19 Starting Slave Register in UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 19 65535 Admin; Engineer;
Meas. Tech
R/O:
670 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Operator
N/A:
Auditor
NUM_REG_19 Number of Registers for UINT16 1120 1 R/W: 2.0.0.XXX Log Changes
Request 19 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
MASTER_REG_19 Starting Master Register for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 19 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
COMM_STATUS_19 Comm Status for Request 19 UINT8 0 Inactive or R/O: 2.0.0.XXX
Start of Admin; Engineer;
Transmission Meas. Tech;
(162-0) Operator
N/A:
Auditor
SERVER_IP_ADD_20 Slave Server IP Address for ByteArray4 Undefined R/W: 2.0.0.XXX Log Changes
Request 20 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
SERVER_PORT_NO_ Slave Server Port Number for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
20 Request 20 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
Object Parameter Listing 671
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
N/A:
Auditor
RTU_ADD_20 Slave Address for Request 20 UINT8 0255 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
FUNC_CODE_20 Function code for Request 20 ENUM16 Polling Disabled (0) Function Code R/W: 2.0.0.XXX Log Changes
0 - Polling Disabled (161) Admin; Engineer;
1 - Read Coil Status Meas. Tech
2 - Read Input Status R/O:
3 - Read Holding Registers Operator
4 - Read Input Registers N/A:
5 - Force Single Coil Auditor
6 - Set Single Register
15 - Force Multiple Coils
16 - Set Multiple Registers
SLAVE_REG_20 Starting Slave Register in UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 20 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
NUM_REG_20 Number of Registers for UINT16 1120 1 R/W: 2.0.0.XXX Log Changes
Request 20 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
MASTER_REG_20 Starting Master Register for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 20 65535 Admin; Engineer;
672 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
R/O:
Operator
N/A:
Auditor
COMM_STATUS_20 Comm Status for Request 20 UINT8 0 Inactive or R/O: 2.0.0.XXX
Start of Admin; Engineer;
Transmission Meas. Tech;
(162-0) Operator
N/A:
Auditor
SERVER_IP_ADD_21 Slave Server IP Address for ByteArray4 Undefined R/W: 2.0.0.XXX Log Changes
Request 21 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
SERVER_PORT_NO_ Slave Server Port Number for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
21 Request 21 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
RTU_ADD_21 Slave Address for Request 21 UINT8 0255 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
FUNC_CODE_21 Function code for Request 21 ENUM16 Polling Disabled (0) Function Code R/W: 2.0.0.XXX Log Changes
0 - Polling Disabled (161) Admin; Engineer;
1 - Read Coil Status Meas. Tech
Object Parameter Listing 673
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
2 - Read Input Status R/O:
3 - Read Holding Registers Operator
4 - Read Input Registers N/A:
5 - Force Single Coil Auditor
6 - Set Single Register
15 - Force Multiple Coils
16 - Set Multiple Registers
SLAVE_REG_21 Starting Slave Register in UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 21 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
NUM_REG_21 Number of Registers for UINT16 1120 1 R/W: 2.0.0.XXX Log Changes
Request 21 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
MASTER_REG_21 Starting Master Register for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 21 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
COMM_STATUS_21 Comm Status for Request 21 UINT8 0 Inactive or R/O: 2.0.0.XXX
Start of Admin; Engineer;
Transmission Meas. Tech;
(162-0) Operator
N/A:
Auditor
674 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
SERVER_IP_ADD_22 Slave Server IP Address for ByteArray4 Undefined R/W: 2.0.0.XXX Log Changes
Request 22 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
SERVER_PORT_NO_ Slave Server Port Number for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
22 Request 22 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
RTU_ADD_22 Slave Address for Request 22 UINT8 0255 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
FUNC_CODE_22 Function code for Request 22 ENUM16 Polling Disabled (0) Function Code R/W: 2.0.0.XXX Log Changes
0 - Polling Disabled (161) Admin; Engineer;
1 - Read Coil Status Meas. Tech
2 - Read Input Status R/O:
3 - Read Holding Registers Operator
4 - Read Input Registers N/A:
5 - Force Single Coil Auditor
6 - Set Single Register
15 - Force Multiple Coils
16 - Set Multiple Registers
SLAVE_REG_22 Starting Slave Register in UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 22 65535 Admin; Engineer;
Meas. Tech
R/O:
Object Parameter Listing 675
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Operator
N/A:
Auditor
NUM_REG_22 Number of Registers for UINT16 1120 1 R/W: 2.0.0.XXX Log Changes
Request 22 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
MASTER_REG_22 Starting Master Register for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 22 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
COMM_STATUS_22 Comm Status for Request 22 UINT8 0 Inactive or R/O: 2.0.0.XXX
Start of Admin; Engineer;
Transmission Meas. Tech;
(162-0) Operator
N/A:
Auditor
SERVER_IP_ADD_23 Slave Server IP Address for ByteArray4 Undefined R/W: 2.0.0.XXX Log Changes
Request 23 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
SERVER_PORT_NO_ Slave Server Port Number for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
23 Request 23 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
676 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
N/A:
Auditor
RTU_ADD_23 Slave Address for Request 23 UINT8 0255 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
FUNC_CODE_23 Function code for Request 23 ENUM16 Polling Disabled (0) Function Code R/W: 2.0.0.XXX Log Changes
0 - Polling Disabled (161) Admin; Engineer;
1 - Read Coil Status Meas. Tech
2 - Read Input Status R/O:
3 - Read Holding Registers Operator
4 - Read Input Registers N/A:
5 - Force Single Coil Auditor
6 - Set Single Register
15 - Force Multiple Coils
16 - Set Multiple Registers
SLAVE_REG_23 Starting Slave Register in UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 23 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
NUM_REG_23 Number of Registers for UINT16 1120 1 R/W: 2.0.0.XXX Log Changes
Request 23 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
MASTER_REG_23 Starting Master Register for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 23 65535 Admin; Engineer;
Object Parameter Listing 677
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
R/O:
Operator
N/A:
Auditor
COMM_STATUS_23 Comm Status for Request 23 UINT8 0 Inactive or R/O: 2.0.0.XXX
Start of Admin; Engineer;
Transmission Meas. Tech;
(162-0) Operator
N/A:
Auditor
SERVER_IP_ADD_24 Slave Server IP Address for ByteArray4 Undefined R/W: 2.0.0.XXX Log Changes
Request 24 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
SERVER_PORT_NO_ Slave Server Port Number for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
24 Request 24 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
RTU_ADD_24 Slave Address for Request 24 UINT8 0255 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
FUNC_CODE_24 Function code for Request 24 ENUM16 Polling Disabled (0) Function Code R/W: 2.0.0.XXX Log Changes
0 - Polling Disabled (161) Admin; Engineer;
1 - Read Coil Status Meas. Tech
678 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
2 - Read Input Status R/O:
3 - Read Holding Registers Operator
4 - Read Input Registers N/A:
5 - Force Single Coil Auditor
6 - Set Single Register
15 - Force Multiple Coils
16 - Set Multiple Registers
SLAVE_REG_24 Starting Slave Register in UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 24 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
NUM_REG_24 Number of Registers for UINT16 1120 1 R/W: 2.0.0.XXX Log Changes
Request 24 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
MASTER_REG_24 Starting Master Register for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 24 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
COMM_STATUS_24 Comm Status for Request 24 UINT8 0 Inactive or R/O: 2.0.0.XXX
Start of Admin; Engineer;
Transmission Meas. Tech;
(162-0) Operator
N/A:
Auditor
Object Parameter Listing 679
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
SERVER_IP_ADD_25 Slave Server IP Address for ByteArray4 Undefined R/W: 2.0.0.XXX Log Changes
Request 25 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
SERVER_PORT_NO_ Slave Server Port Number for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
25 Request 25 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
RTU_ADD_25 Slave Address for Request 25 UINT8 0255 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
FUNC_CODE_25 Function code for Request 25 ENUM16 Polling Disabled (0) Function Code R/W: 2.0.0.XXX Log Changes
0 - Polling Disabled (161) Admin; Engineer;
1 - Read Coil Status Meas. Tech
2 - Read Input Status R/O:
3 - Read Holding Registers Operator
4 - Read Input Registers N/A:
5 - Force Single Coil Auditor
6 - Set Single Register
15 - Force Multiple Coils
16 - Set Multiple Registers
SLAVE_REG_25 Starting Slave Register in UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 25 65535 Admin; Engineer;
Meas. Tech
R/O:
680 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Poll Table
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Operator
N/A:
Auditor
NUM_REG_25 Number of Registers for UINT16 1120 1 R/W: 2.0.0.XXX Log Changes
Request 25 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
MASTER_REG_25 Starting Master Register for UINT16 0 0 R/W: 2.0.0.XXX Log Changes
Request 25 65535 Admin; Engineer;
Meas. Tech
R/O:
Operator
N/A:
Auditor
COMM_STATUS_25 Comm Status for Request 25 UINT8 0 Inactive or R/O: 2.0.0.XXX
Start of Admin; Engineer;
Transmission Meas. Tech;
(162-0) Operator
N/A:
Auditor
Object Parameter Listing 681
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.56 PowerCtrl Parameters
Description: The PowerCtrl object provides the parameters for configuring power control to allow scheduled radio
or SCADA operations.
Number of Instances: 3 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-55: PowerCtrl Parameters
Power Ctrl
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Power Control R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech;
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 Power Control R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
682 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Power Ctrl
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
PWR_CTRL_ENABLE Power Control Enable ENUM16 01 Disable (0) Enable/Disable R/W: 2.0.0.XXX Log Changes
0 - Disable Selection (30) Admin; Engineer;
1 - Enable Meas. Tech
R/O:
Operator; Auditor
PWR_CTRL_STATUS Power Control Status ENUM16 Power Control Power Control R/O:
0 - Power Control Inactive Inactive (0) Status (259) Admin; Engineer;
1 - Power Control Active Meas. Tech;
2 - Power Control Low Operator; Auditor
Voltage
3 - Power Control Held By
Comms
COMM_ENABLE_ Communication Port Enable ENUM16 33 All Comm Ports Power Control R/W: 2.0.0.XXX Log Changes
OPTION Option Enabled (3) Comm Port Admin; Engineer;
3 - All Comm Ports Enabled Option (257) Meas. Tech
R/O:
Operator; Auditor
OUT_REF Output Ref ParamRef Undefined R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
START_TIME_1 Power Control Timer 1 Start UINT16 0 9999 R/W: 2.0.0.XXX Log Changes
Time 9999 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
TIME_ON_1 Power Control Timer 1 UINT16 0 0 s (17-0) R/W: 2.0.0.XXX Log Changes
Duration 14400 Admin; Engineer;
Meas. Tech
Object Parameter Listing 683
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Power Ctrl
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
TIME_OFF_1 Power Control Timer 1 Off UINT16 0 0 s (17-0) R/W: 2.0.0.XXX Log Changes
Duration 14400 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
START_TIME_2 Power Control Timer 2 Start UINT16 0 9999 R/W: 2.0.0.XXX Log Changes
Time 9999 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
TIME_ON_2 Power Control Timer 2 UINT16 0 0 s (17-0) R/W: 2.0.0.XXX Log Changes
Duration 14400 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
TIME_OFF_2 Power Control Timer 2 Off UINT16 0 0 s (17-0) R/W: 2.0.0.XXX Log Changes
Duration 14400 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
START_TIME_3 Power Control Timer 3 Start UINT16 0 9999 R/W: 2.0.0.XXX Log Changes
Time 9999 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
TIME_ON_3 Power Control Timer 3 UINT16 0 0 s (17-0) R/W: 2.0.0.XXX Log Changes
Duration 14400 Admin; Engineer;
Meas. Tech
684 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Power Ctrl
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
TIME_OFF_3 Power Control Timer 3 Off UINT16 0 0 s (17-0) R/W: 2.0.0.XXX Log Changes
Duration 14400 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
START_TIME_4 Power Control Timer 4 Start UINT16 0 9999 R/W: 2.0.0.XXX Log Changes
Time 9999 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
TIME_ON_4 Power Control Timer 4 UINT16 0 0 s (17-0) R/W: 2.0.0.XXX Log Changes
Duration 14400 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
TIME_OFF_4 Power Control Timer 4 Off UINT16 0 0 s (17-0) R/W: 2.0.0.XXX Log Changes
Duration 14400 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 685
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.57 Press Parameters
Description: The Press object provides the parameters for configuring static pressure sensors.
Number of Instances: 20 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-56: Press Parameters
Press
Default
Description of functionality Measurement
Name and meaning of values Data Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
“4088B_X Press” Admin; Engineer; ▪ Legal
(where X is Meas. Tech
instance number R/O:
between 1 and 20) Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
MOD_LOC Module Location UINT8 1 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
686 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Press
Default
Description of functionality Measurement
Name and meaning of values Data Type Range Default Type (Table #) Access (by Role) Version Other Attributes
CHANNEL Channel UINT8 Instance: R/O: 2.0.0.XXX Legal
1-1 Admin; Engineer;
2-2 Meas. Tech
3-3 Operator; Auditor
4-4
5-5
6-6
7-7
8-8
9-9
10-10
11-11
12-12
13-13
14-14
15-15
16-16
17-17
18-18
19-19
20-20
DESC Description UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
“4088B_X Press” Admin; Engineer; ▪ Legal
(where X is Meas. Tech
instance number R/O:
between 1 and 20) Operator; Auditor
UNITS Units ENUM16 04 psi (0) Pressure (78) R/W: 2.0.0.XXX ▪ Log Changes
0 - psi Admin; Engineer; ▪ Legal
1 - kPa Meas. Tech
2 - MPa R/O:
Operator; Auditor
Object Parameter Listing 687
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Press
Default
Description of functionality Measurement
Name and meaning of values Data Type Range Default Type (Table #) Access (by Role) Version Other Attributes
3 - bar
4 - kg/cm²
LIVE Live Value FLOAT 0 psi(a) (2-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
OVRD Override Value FLOAT 0 psi(a) (2-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
FAULT Fault Value FLOAT 0 psi(a) (2-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
LAST_GOOD Last Good Value FLOAT 0 psi(a) (2-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
SELECTED Selected Value FLOAT 0 psi(a) (2-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
USER_MODE Operation Mode ENUM16 01 Live (0) User Selection R/W: 2.0.0.XXX ▪ Log Changes
0 - Live (31) Admin; Engineer; ▪ Legal
1 - Override Meas. Tech
R/O:
Operator; Auditor
688 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Press
Default
Description of functionality Measurement
Name and meaning of values Data Type Range Default Type (Table #) Access (by Role) Version Other Attributes
FAULT_MODE Fault Mode ENUM16 03 Live (0) Fault Selection R/W: 2.0.0.XXX ▪ Log Changes
0 - Live (32) Admin; Engineer; ▪ Legal
1 - Fault Meas. Tech
2 - Last Good R/O:
3 - Last Hour Average Operator; Auditor
DAMPING Damping Time FLOAT 060 0 s (17-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
ALM_OBJ Alarm Reference ObjectRef Instance: R/O: 2.0.0.XXX Legal
1-Alarm_2002 Admin; Engineer;
2-Alarm_2005 Meas. Tech
3-Alarm_2008 Operator; Auditor
4-Alarm_2011
5-Alarm_2014
6-Alarm_2017
7-Alarm_2020
8-Alarm_2023
9-Alarm_2026
10-Alarm_2029
11-Alarm_2032
12-Alarm_2035
13-Alarm_2038
14-Alarm_2041
15-Alarm_2044
16-Alarm_2047
17-Alarm_2050
18-Alarm_2053
19-Alarm_2056
20-Alarm_2059
Object Parameter Listing 689
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Press
Default
Description of functionality Measurement
Name and meaning of values Data Type Range Default Type (Table #) Access (by Role) Version Other Attributes
URL Upper Range Limit FLOAT 0 psi(a) (2-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
LRL Lower Range Limit FLOAT 0 psi(a) (2-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
MONITOR_MAX Monitor Maximum FLOAT 4000 psi(a) (2-0) R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
MONITOR_MIN Monitor Minimum FLOAT 0 psi(a) (2-0) R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
MIN_SPAN Minimum Span FLOAT 0 psi(a) (2-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
INPUT_STATUS Input Health Status BIN16 Normal Alarm Status R/O: 2.0.0.XXX Legal
0 - Normal DP SP (44) Admin; Engineer;
1 - Not Licensed Meas. Tech
2 - Instance Inactive Operator; Auditor
3 - Comm Fail
4 - Override Active
5 - In Alarm
6 - Point Fail
690 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Press
Default
Description of functionality Measurement
Name and meaning of values Data Type Range Default Type (Table #) Access (by Role) Version Other Attributes
7 - Above URL
8 - Below LRL
9 - Input Frozen
CAL_OBJ Calibration Reference ObjectRef Instance: R/O: 2.0.0.XXX Legal
1-FLTCal_1-2 Admin; Engineer;
2-FLTCal_1-5 Meas. Tech
3-FLTCal_1-8 Operator; Auditor
4-FLTCal_1-11
5-FLTCal_1-14
6-FLTCal_1-17
7-FLTCal_1-20
8-FLTCal_1-23
9-FLTCal_1-26
10-FLTCal_1-29
11-FLTCal_1-32
12-FLTCal_1-35
13-FLTCal_1-38
14-FLTCal_1-41
15-FLTCal_1-44
16-FLTCal_1-47
17-FLTCal_1-50
18-FLTCal_1-53
19-FLTCal_1-56
20-FLTCal_1-59
LAST_HOUR_ Last Hour Average Value FLOAT 0 psi(a) (2-0) R/O: 2.5.0.XXX Legal
AVERAGE Admin; Engineer;
Meas. Tech
Operator; Auditor
Object Parameter Listing 691
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.58 Printer Parameters
Description: The Printer object provides the parameters for configuring printer parameters
Number of Instances: 1 instance may exist.
Storage Location: Saved to internal configuration memory.
Table 5-57: Printer Parameters
Printer
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Printer_1 R/W: 2.17.0.XXX Log Changes
Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.17.0.XXX Log Changes
Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.17.0.XXX Legal
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
PRINTER_PORT Printer Port ID UINT16 9001 R/W: 2.17.0.XXX Log Changes
Admin; Engineer; Legal
692 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Printer
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
R/O:
Operator; Auditor
PRINTER_IP_ADDR IP Address BYTE4 IPv4 Address R/W: 2.17.0.XXX Log Changes
(41) Admin; Engineer; Legal
Meas. Tech
R/O:
Operator; Auditor
COM_SEL Comm Port Selection ENUM16 4 -> 5 4 Comm Port R/W: 2.17.0.XXX Log Changes
Instance (302) Admin; Engineer; Legal
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 693
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.59 Prn Setup Parameters
Description: The Printer Setup object provides the parameters for configuring printer setup parameters
Number of Instances: 1 instance may exist.
Storage Location: Saved to internal configuration memory.
Table 5-58: Prn Setup Parameters
Prn Setup
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Prn Setup_1 R/W: 2.17.0.XXX Log Changes
Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.17.0.XXX Log Changes
Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.17.0.XXX Legal
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
NUM_PRINTERS Num of Printers UINT16 0 -> 1 R/W: 2.17.0.XXX Log Changes
Admin; Engineer; Legal
694 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Prn Setup
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
R/O:
Operator; Auditor
BUSY_STATUS Setup Busy Status ENUM16 0 -> 1 Busy Status R/O: 2.17.0.XXX Legal
(287) Admin; Engineer;
Meas. Tech
Operator; Auditor
Object Parameter Listing 695
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.60 RackConfig Parameters
Description: The RackConfig object provides the parameters for configuring pass-thru capabilities to additional
FB1000 and FB2000 series flow computer and FB3000 RTUs, and Remote IO units.
Number of Instances: 10 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-59: RackConfig Parameters
RackConfig
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.5.0.XXX Log Changes
Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.5.0.XXX Log Changes
Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.5.0.XXX Legal
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
PASS_THRU_ADDR Pass Thru Address UINT16 0 Instance: R/W: 2.5.0.XXX Log Changes
65519 Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
696 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
RackConfig
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
RACK_IP_ADDR Rack IP Address ByteArray IPv4 Address (41) R/W: 2.5.0.XXX Log Changes
4 Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
COMM_PORT_NUM Comm Port Number ENUM16 45 Ethernet Port 1 (4) Comm Port R/W: 2.5.0.XXX Log Changes
Instance (302) Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
RACK_DNP_ADDR Rack DNP Address UINT16 0 1 R/W: 2.5.0.XXX Log Changes
65519 Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
TCPIP_PORT TAC/IP Port UINT16 20000 R/W: 2.5.0.XXX Log Changes
Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
Object Parameter Listing 697
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.61 Redundancy Parameters
Description: The Redundancy object provides the parameters for synchronizing and collecting the data between two
CPUs
Number of Instances: 1 instance may exist
Storage Location: Saved to internal configuration memory.
Table 5-60: Redundancy Parameters
Redundancy
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.5.0.XXX Log Changes
Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.5.0.XXX Log Changes
Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.5.0.XXX Legal
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
REDUN_STATUS Redundancy Status ENUM16 0 Redundancy R/O: 2.13.0.XXX -
Status (385) Admin; Engineer;
698 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Redundancy
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
Operator; Auditor
STANDBY_STATUS Standby Status ENUM16 0 Standby Status R/O: 2.13.0.XXX -
(386) Admin; Engineer;
Meas. Tech
Operator; Auditor
REDUN_SLOT Active Slot ENUM16 0 Active Slot R/O: 2.13.0.XXX -
(387) Admin; Engineer;
Meas. Tech
Operator; Auditor
RED_UPD_START Update Start UINT32 0 Time R/O: 2.13.0.XXX -
Synchronizatio Admin; Engineer;
n Deadband Meas. Tech
(310) Operator; Auditor
RED_UPD_LENGTH Update Length UINT32 0 Time R/O: 2.13.0.XXX -
Synchronizatio Admin; Engineer;
n Deadband Meas. Tech
(310) Operator; Auditor
RED_UPD_START_A Update Start Avg FLOAT 0 Time R/O: 2.13.0.XXX -
VG Synchronizatio Admin; Engineer;
n Deadband Meas. Tech
(310) Operator; Auditor
RED_UPD_LENGTH_ Update Length Avg FLOAT 0 Time R/O: 2.13.0.XXX -
AVG Synchronizatio Admin; Engineer;
n Deadband Meas. Tech
(310) Operator; Auditor
RED_UPD_DELAY Update Delays UINT32 0 Time R/O: 2.13.0.XXX -
Synchronizatio Admin; Engineer;
n Deadband Meas. Tech
(310) Operator; Auditor
Object Parameter Listing 699
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Redundancy
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
RED_SL_STATE SideLoad State UC40 R/O: 2.14.0.XXX -
Admin; Engineer;
Meas. Tech
Operator; Auditor
RED_SL_HIST SideLoad History UC40 R/O: 2.14.0.XXX -
Admin; Engineer;
Meas. Tech
Operator; Auditor
PRIMARY_LINK Primary Link Interface ENUM16 0 -> 3 0 Link (404) R/W: 2.14.0.XXX -
Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
SECONDARY_LINK Secondary Link Interface ENUM16 0 -> 3 0 Link (404) R/W: 2.14.0.XXX -
Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
PRIMARY_LINK_STA Primary Link Status ENUM16 0 Standby Status R/O: 2.14.0.XXX -
T (386) Admin; Engineer;
Meas. Tech
Operator; Auditor
SECONDARY_LINK_ Secondary Link Status ENUM16 0 Standby Status R/O: 2.14.0.XXX -
STAT (386) Admin; Engineer;
Meas. Tech
Operator; Auditor
PRIMARY_LINK_PEE Primary Link Peer IP address BYTE4 0x00000000 IPv4 Address R/W: 2.14.0.XXX -
R (41) Admin
700 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Redundancy
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
SECONDARY_LINK_ Secondary Link Peer IP BYTE4 0x00000000 IPv4 Address R/W: 2.14.0.XXX -
PEER address (41) Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
Object Parameter Listing 701
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.62 Rep Setup Parameters
Description: The Rep Setup object provides the parameters for report setup parameters.
Number of Instances: 1 instance may exist.
Storage Location: Saved to internal configuration memory.
Table 5-61: Rep Setup Parameters
Rep Setup
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Default R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.17.0.XXX Log Changes
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 R/W: 2.17.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
NUM_REPORTS Nm of Reports UINT16 0 -> 36
BUSY_STATUS Setup Busy Status ENUM16 0 -> 1 Busy Status
(287)
702 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.63 Report Parameters
Description: The Report object provides the parameters for report.
Number of Instances: 36 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-62: Report Parameters
Report
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Default R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.17.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.17.0.XXX Log Changes
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 R/W: 2.17.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
TEMPLATE_FILE Report Template Filename UC40 R/W: 2.17.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Object Parameter Listing 703
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Report
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
REPORT_CMD, Report Command ENUM16 0 -> 2 Generate R/W: 2.17.0.XXX ▪ Log Changes
Report Admin; Engineer; ▪ Legal
Command Meas. Tech
(408) R/O:
Operator; Auditor
REPORT_PARAM Report Command Parameter PRMREF R/W: 2.17.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
REPORT_TIME Report Time TIME R/O: 2.17.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Operator; Auditor
REPORT_LABEL_1 File Name Prefix UC20 R/W: 2.17.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
REPORT_NUM Report Number UINT32 R/O: 2.17.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Operator; Auditor
TEMPLATE_CHECK Template Checksum UINT32 R/O: 2.17.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Operator; Auditor
704 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.64 Role Parameters
Description: The Role object provides the parameters for configuring roles assigned to different users.
Number of Instances: 5 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-63: Role Parameters
Role
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Role R/W: 2.0.0.XXX ▪ Log Changes
Admin ▪ Legal
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
OBJ_AREA Area Assignment UINT8 05 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin ▪ Legal
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX Legal
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
ROLE_NAME Role Name UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
1-Admin Admin ▪ Legal
2-Engineer R/O:
3-Measurement Engineer; Meas.
Tech Tech; Operator;
4-Operator Auditor
5-Auditor
Object Parameter Listing 705
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Role
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
FW_PERM Permit Firmware Update ENUM16 01 Instance: Enable/Disable Instance: 2.0.0.XXX ▪ Log Changes
0 - Disable 1-3: Enable (1) Selection (30) 1: ▪ Legal
1 - Enable 4-5: Disable (0) R/O:
Admin
Engineer; Meas.
Tech; Operator;
Auditor
2-5:
R/W:
Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
USR_PERM Permit User Management ENUM16 01 Instance: Enable/Disable Instance: 2.0.0.XXX ▪ Log Changes
0 - Disable 1: Enable (1) Selection (30) 1: ▪ Legal
1 - Enable 2-5: Disable (0) R/O:
Admin
Engineer; Meas.
Tech; Operator;
Auditor
2-5:
R/W:
Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
CFG_PERM Permit Configuration ENUM16 01 Instance: Enable/Disable Instance: 2.0.0.XXX ▪ Log Changes
Download 1-3: Enable (1) Selection (30) 1: ▪ Legal
0 - Disable 4-5: Disable (0) R/O:
1 - Enable Admin
Engineer; Meas.
706 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Role
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Tech; Operator;
Auditor
2-5:
R/W:
Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
SYS_RST_PERM Permit System Restart ENUM16 01 Instance: Enable/Disable Instance: 2.0.0.XXX ▪ Log Changes
0 - Disable 1-3: Enable (1) Selection (30) 1: ▪ Legal
1 - Enable 4-5: Disable (0) R/O:
Admin
Engineer; Meas.
Tech; Operator;
Auditor
2-5:
R/W:
Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
DAT_COLL_PERM Permit Data Collection ENUM16 01 Instance: Enable/Disable Instance: 2.0.0.XXX ▪ Log Changes
0 - Disable 1-4: Enable (1) Selection (30) 1: ▪ Legal
1 - Enable 5: Disable (0) R/O:
Admin
Engineer; Meas.
Tech; Operator;
Auditor
2-5:
R/W:
Object Parameter Listing 707
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Role
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
DAT_MGMT_PERM Permit Data Management ENUM16 01 Instance: Enable/Disable Instance: 2.0.0.XXX ▪ Log Changes
0 - Disable 1-3: Enable (1) Selection (30) 1: ▪ Legal
1 - Enable 4-5: Disable (0) R/O:
Admin
Engineer; Meas.
Tech; Operator;
Auditor
2-5:
R/W:
Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
CALIB_PERM Permit Calibration ENUM16 01 Instance: Enable/Disable Instance: 2.0.0.XXX ▪ Log Changes
0 - Disable 1-3: Enable (1) Selection (30) 1: ▪ Legal
1 - Enable 4-5: Disable (0) R/O:
Admin
Engineer; Meas.
Tech; Operator;
Auditor
2-5:
R/W:
Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
708 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Role
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
TIME_SYNC_PERM Permit Time Synchronization ENUM16 01 Instance: Enable/Disable Instance: 2.0.0.XXX ▪ Log Changes
0 - Disable 1-4: Enable (1) Selection (30) 1: ▪ Legal
1 - Enable 5: Disable (0) R/O:
Admin
Engineer; Meas.
Tech; Operator;
Auditor
2-5:
R/W:
Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
DNP3_READ_PERM Permit DNP3 File Read ENUM16 01 Instance: Enable/Disable Instance: 2.0.0.XXX ▪ Log Changes
0 - Disable 1-5: Enable (1) Selection (30) 1: ▪ Legal
1 - Enable R/O:
Admin
Engineer; Meas.
Tech; Operator;
Auditor
2-5:
R/W:
Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
SYS_VERIFY_PERM System Verify Permission ENUM16 01 Instance: Enable/Disable Instance: 2.5.0.XXX Log Changes
0 - Disable 1 - Enable (1) Selection (30) 1:
1 - Enable 2 - Disable (0) R/O:
3 - Disable (0) Admin; Engineer;
4 - Disable (0)
Object Parameter Listing 709
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Role
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
5 - Disable (0) Meas. Tech;
Operator; Auditor
2-5:
R/W:
Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
KEY_UPDATE_PERM Key Update Permission ENUM16 01 Instance: Enable/Disable Instance: 2.13.0.XXX Log Changes
1 - Enable (1) Selection (30) 1:
2 - Disable (0) R/O:
3 - Disable (0) Admin; Engineer;
4 - Disable (0) Meas. Tech;
5 - Disable (0) Operator; Auditor
2-5:
R/W:
Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
710 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.65 RTD Parameters
Description: The RTD object provides the parameters for configuring remote temperature detectors.
Number of Instances: 20 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-64: RTD Parameters
RTD
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
“4088B_X RTD” Admin; Engineer; ▪ Legal
(where X is Meas. Tech
instance number R/O:
between 1 and Operator; Auditor
20)
OBJ_AREA Area Assignment UINT8 0→5 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
MOD_LOC Module Location UINT8 1 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
CHANNEL Channel UINT8 Instance: R/O: 2.0.0.XXX Legal
1-1 Admin; Engineer;
2-2 Meas. Tech
3-3 Operator; Auditor
Object Parameter Listing 711
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
RTD
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
4-4
5-5
6-6
7-7
8-8
9-9
10-10
11-11
12-12
13-13
14-14
15-15
16-16
17-17
18-18
19-19
20-20
DESC Description UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
“4088B_X RTD” Admin; Engineer; ▪ Legal
(where X is Meas. Tech
instance number R/O:
between 1 and Operator; Auditor
20)
UNITS Units ENUM16 Instance: °F (0) Instance: R/W: 2.0.0.XXX ▪ Log Changes
0 - °F 1-20: 1-20: Admin; Engineer; ▪ Legal
1 - °C 0→1 4088 Meas. Tech
Temperature R/O:
(242) Operator; Auditor
LIVE Live Value FLOAT 0 Instance: R/O: 2.0.0.XXX Legal
1-20: Admin; Engineer;
°F (242-0) Meas. Tech
Operator; Auditor
OVRD Override Value FLOAT 0 Instance: R/W: 2.0.0.XXX ▪ Log Changes
1-20: Admin; Engineer; ▪ Legal
°F (242-0) Meas. Tech
712 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
RTD
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
FAULT Fault Value FLOAT 0 Instance: R/W: 2.0.0.XXX ▪ Log Changes
1-20: Admin; Engineer; ▪ Legal
°F (242-0) Meas. Tech
R/O:
Operator; Auditor
LAST_GOOD Last Good Value FLOAT 0 Instance: R/O: 2.0.0.XXX Legal
1-20: Admin; Engineer;
°F (242-0) Meas. Tech
Operator; Auditor
SELECTED Selected Value FLOAT 0 Instance: R/O: 2.0.0.XXX Legal
1-20: Admin; Engineer;
°F (242-0) Meas. Tech
Operator; Auditor
USER_MODE Operation Mode ENUM16 0→1 Live (0) User Selection R/W: 2.0.0.XXX ▪ Log Changes
0 - Live (31) Admin; Engineer; ▪ Legal
1 - Override Meas. Tech
R/O:
Operator; Auditor
FAULT_MODE Fault Mode ENUM16 0→3 Live (0) Fault Selection R/W: 2.0.0.XXX ▪ Log Changes
0 - Live (32) Admin; Engineer; ▪ Legal
1 - Fault Meas. Tech
2 - Last Good R/O:
3 – Last Hour Average Operator; Auditor
RTD_TYPE RTD Type ENUM16 Instance: 4-wire (2) Instance: R/W: 2.0.0.XXX ▪ Log Changes
1 - 3-wire 1-20: 1-20: Admin; Engineer; ▪ Legal
2 - 4-wire 1→2 4088 RTD Type Meas. Tech
(219) R/O:
Operator; Auditor
CVD_CURVE CVD Curve Selection ENUM16 0→2 User (0) CVD Curve R/W: 2.0.0.XXX ▪ Log Changes
0 - User Selection (49) Admin; Engineer; ▪ Legal
1 - Alpha 0.00385 DIN/IEC Meas. Tech
2 - Alpha 0.00392 R/O:
Operator; Auditor
Object Parameter Listing 713
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
RTD
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
RTD_ACOEFF CVD A Coeff In Use FLOAT 0.0039083 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
RTD_BCOEFF CVD B Coeff In Use FLOAT -5.78E – 07 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
RTD_R0COEFF CVD R0 Coeff in Use FLOAT 100 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
RTD_CCOEFF CVD C Coeff In Use FLOAT -4.18E – 12 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
USR_ACOEFF CVD A Coeff Entered FLOAT 3.91E-04 0.0039083 R/W: 2.0.0.XXX ▪ Log Changes
→ Admin; Engineer; ▪ Legal
3.91E-02 Meas. Tech
R/O:
Operator; Auditor
USR_BCOEFF CVD B Coeff Entered FLOAT –5.78E-06 -5.78E – 07 R/W: 2.0.0.XXX ▪ Log Changes
< Admin; Engineer; ▪ Legal
-5.78E-08 Meas. Tech
R/O:
Operator; Auditor
USR_R0COEFF CVD R0 Coeff Entered FLOAT 95→105 100 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
USR_CCOEFF CVD C Coeff Entered FLOAT –4.18E-11 -4.18E – 12 R/W: 2.0.0.XXX ▪ Log Changes
→ Admin; Engineer; ▪ Legal
4.18E-11 Meas. Tech
714 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
RTD
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
DAMPING Damping Time FLOAT 0→60 0 s (17-0) R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
ALM_OBJ Alarm Reference ObjectRef Instance: R/O: 2.0.0.XXX Legal
1-Alarm_2003 Admin; Engineer;
2-Alarm_2006 Meas. Tech
3-Alarm_2009 Operator; Auditor
4-Alarm_2012
5-Alarm_2015
6-Alarm_2018
7-Alarm_2021
8-Alarm_2024
9-Alarm_2027
10-Alarm_2030
11-Alarm_2033
12-Alarm_2036
13-Alarm_2039
14-Alarm_2042
15-Alarm_2045
16-Alarm_2048
17-Alarm_2051
18-Alarm_2054
19-Alarm_2057
20-Alarm_2060
URL Upper Range Limit FLOAT 1562 Instance: R/O: 2.0.0.XXX Legal
1-20: Admin; Engineer;
°F (242-0) Meas. Tech
Operator; Auditor
LRL Lower Range Limit FLOAT – 328 Instance: R/O: 2.0.0.XXX Legal
1-20: Admin; Engineer;
°F (242-0)
Object Parameter Listing 715
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
RTD
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
Operator; Auditor
MONITOR_MAX Monitor Maximum FLOAT 250 Instance: R/W: 2.0.0.XXX Log Changes
1-20: Admin; Engineer;
°F (242-0) Meas. Tech
R/O:
Operator; Auditor
MONITOR_MIN Monitor Minimum FLOAT – 50 Instance: R/W: 2.0.0.XXX Log Changes
1-20: Admin; Engineer;
°F (242-0) Meas. Tech
R/O:
Operator; Auditor
MIN_SPAN Minimum Span FLOAT 50 Instance: R/O: 2.0.0.XXX Legal
1-20: Admin; Engineer;
°F (242-0) Meas. Tech
Operator; Auditor
INPUT_STATUS Input Health Status BIN16 Normal Alarm Status R/O: 2.0.0.XXX Legal
0 - Normal RTD (220) Admin; Engineer;
1 - Not Licensed Meas. Tech
2 - Instance Inactive Operator; Auditor
3 - Comm Fail
4 - Override Active
5 - In Alarm
6 - Point Fail
7 - Above URL
8 - Below LRL
9 - Input Frozen
10 - Type Mismatch
CAL_OBJ Calibration Reference ObjectRef Instance: R/O: 2.0.0.XXX Legal
1-FLTCal_1-3 Admin; Engineer;
2-FLTCal_1-6 Meas. Tech
3-FLTCal_1-9 Operator; Auditor
4-FLTCal_1-12
5-FLTCal_1-15
6-FLTCal_1-18
716 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
RTD
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
7-FLTCal_1-21
8-FLTCal_1-24
9-FLTCal_1-27
10-FLTCal_1-30
11-FLTCal_1-33
12-FLTCal_1-36
13-FLTCal_1-39
14-FLTCal_1-42
15-FLTCal_1-45
16-FLTCal_1-48
17-FLTCal_1-51
18-FLTCal_1-54
19-FLTCal_1-57
20-FLTCal_1-60
LAST_HOUR_ Last Hour Average Value FLOAT Instance: R/O: 2.5.0.XXX Legal
AVERAGE 1 - °F (242-0) Admin; Engineer;
2 - °F (242-0) Meas. Tech
3 - °F (242-0) Operator; Auditor
4 - °F (242-0)
5 - °F (242-0)
6 - °F (242-0)
7 - °F (242-0)
8 - °F (242-0)
9 - °F (242-0)
10 - °F (242-0)
11 - °F (242-0)
12 - °F (242-0)
13 - °F (242-0)
14 - °F (242-0)
15 - °F (242-0)
16 - °F (242-0)
17 - °F (242-0)
18 - °F (242-0)
19 - °F (242-0)
20 - °F (242-0)
Object Parameter Listing 717
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.66 Security Parameters
Description: The Security object provides the parameters for configuring user login requirements and lockout
settings.
Number of Instances: 1 instance may exist.
Storage Location: Saved to internal configuration memory.
Table 5-65: Security Parameters
Security
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Security Policy R/W: 2.0.0.XXX ▪ Log Changes
Admin ▪ Legal
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
OBJ_AREA Area Assignment UINT8 0→5 0 R/W: 2.0.0.XXX Log Changes
Admin
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 Security Policy R/W: 2.0.0.XXX ▪ Log Changes
Admin ▪ Legal
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
718 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Security
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
LOCKOUT_TYPE Lockout Type ENUM16 0→1 Timed (1) Lockout Type R/W: 2.0.0.XXX ▪ Log Changes
0 - Disabled (121) Admin ▪ Legal
1 - Timed R/O:
Engineer; Meas.
Tech; Operator;
Auditor
LOCKOUT_ Lockout Threshold UINT8 1→10 5 R/W: 2.0.0.XXX ▪ Log Changes
THRESHOLD Admin ▪ Legal
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
LOCKOUT_ Lockout Duration UINT16 1→ 15 min (17-1) R/W: 2.0.0.XXX ▪ Log Changes
DURATION 20160 Admin ▪ Legal
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
SUG_MIN_PASS_LE Minimum Password Length UINT8 0→32 8 R/W: 2.0.0.XXX ▪ Log Changes
N Admin ▪ Legal
R/O:
Engineer; Meas.
Tech; Operator;
Auditor
SS_REQUIRE_LOGI Screen Saver ENUM16 0→1 No Password Screen Saver R/W: 2.0.0.XXX ▪ Log Changes
N 0 - No Password Required Required (0) Password Admin ▪ Legal
1 - Password Required (250) R/O:
Engineer; Meas.
Tech; Operator;
Auditor
Object Parameter Listing 719
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.67 Sensor Parameters
Description: The Sensor object provides the parameters for configuring multivariable sensors.
Number of Instances: 20 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-66: Sensor Parameters
Sensor
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
“4088B_Sensor-X” Admin; Engineer; ▪ Legal
(where X is Meas. Tech
instance number R/O:
between 1 and 20) Operator; Auditor
OBJ_AREA Area Assignment UINT8 0→5 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
“4088B_Sensor-X” Admin; Engineer; ▪ Legal
(where X is Meas. Tech
instance number R/O:
between 1 and 20) Operator; Auditor
SER_NUM Serial Number UINT32 0→ 0 R/O: 2.0.0.XXX Legal
16777216 Admin; Engineer;
Meas. Tech
Operator; Auditor
720 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Sensor
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
XMTR_STATUS Transmitter Status BIN32 Normal Sensor R/O: 2.0.0.XXX Legal
0 - Normal Transmitter Admin; Engineer;
1 - SP Out of Low Limits Status (110) Meas. Tech
2 - SP Below Low Alr Limits Operator; Auditor
3 - SP Above Upr Alr Limits
4 - SP Out of Hi Limits
5 - DP Out of Low Limits
6 - DP Below Low Alr Limits
7 - DP Above Upr Alr Limits
8 - DP Out of Hi Limits
9 - Warning Set
10 - Critical Alr Set
11 - 4088B Calib in Progress
12 - Sensor Module Fail
13 - LCD Comm Error
14 - RTD Sensor Mismatch
15 - ST Below Low Alr Limits
16 - ST Above Upr Alr Limits
17 - ST Out of Low Limits
18 - ST Out of Hi Limits
19 - PT Sensor Fail
20 - PT Out of Low Limits
21 - PT Below Low Alr Limits
22 - PT Above Upr Alr Limits
23 - PT Out of Hi Limits
24 - ST Simulation Enable
25 - Write Protect Switch
Lock
26 - PT Simulation Enable
27 - Feature Board Fail
28 - SP Simulation Enable
29 - DP Simulation Enable
30 - Sensor Module
Incompatible
31 - Power Fail
Object Parameter Listing 721
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Sensor
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
32 - Sensor Module Comm
Fail
DP Differential Pressure Object ObjectRef DP Instance: R/O: 2.0.0.XXX Legal
“DP_1-X” (where X Admin; Engineer;
is instance number Meas. Tech
between 1 and 20) Operator; Auditor
SP Static Pressure Object ObjectRef Press Instance: R/O: 2.0.0.XXX Legal
“Press_1-X” (where Admin; Engineer;
X is instance Meas. Tech
number between 1 Operator; Auditor
and 20)
PT Flowing Temperature Object ObjectRef RTD Instance: R/O: 2.0.0.XXX Legal
“RTD_1-X” (where Admin; Engineer;
X is instance Meas. Tech
number between 1 Operator; Auditor
and 20)
SENS_TEMP Sensor Temperature FLOAT 0 Instance: R/O: 2.0.0.XXX Legal
1-20: Admin; Engineer;
°F (242-0) Meas. Tech
Operator; Auditor
TEMP_UNITS Temperature Units ENUM16 Instance °F (0) Instance: R/W: 2.0.0.XXX ▪ Log Changes
0 - °F : 1-20: Admin; Engineer; ▪ Legal
1 - °C 1-20: 4088 Meas. Tech
0 -> 1 Temperature R/O:
(242) Operator; Auditor
URL Upper Range Limit FLOAT 0 Instance: R/O: 2.0.0.XXX Legal
1-20: Admin; Engineer;
°F (242-0) Meas. Tech
Operator; Auditor
LRL Lower Range Limit FLOAT 0 Instance: R/O: 2.0.0.XXX Legal
1-20: Admin; Engineer;
°F (242-0) Meas. Tech
Operator; Auditor
SW_REV Sensor App FW Revision ByteArray Undefined R/O: 2.0.0.XXX Legal
4 Admin; Engineer;
722 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Sensor
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
Operator; Auditor
SENS_CFG Sensor Configuration ENUM16 Standard Coplanar Sensor R/O: 2.0.0.XXX Legal
0 - Standard Coplanar (0) Configuration Admin; Engineer;
1 - Standard Threaded (85) Meas. Tech
2 - Level Coplanar Operator; Auditor
3 - Reference Class Coplanar
4 - High Temp Conventional
252 - Unknown
SENS_TYPE Sensor Type ENUM16 Dual Variable (0) Sensor Type R/O: 2.0.0.XXX Legal
0 - Dual Variable (86) Admin; Engineer;
1 - DP Only Meas. Tech
2 - SP Only Operator; Auditor
SP_TYPE Static Pressure Type ENUM16 Absolute (1) Static Pressure R/O: 2.0.0.XXX Legal
0 - No Static Pressure Type (87) Admin; Engineer;
1 - Absolute Meas. Tech
2 - Gauge Operator; Auditor
DP_RANGE DP Range ENUM16 Range 0 (0) RMT Sensor R/O: 2.0.0.XXX Legal
0 - Range 0 Range (88) Admin; Engineer;
1 - Range 1 Meas. Tech
2 - Range 2 Operator; Auditor
3 - Range 3
4 - Range 4
5 - Range 5
6 - Range 6
7 - Range 7
8 - Range 8
9 - Range 9
10 - Range 10
253 - Special
SP_RANGE SP Range ENUM16 Range 0 (0) RMT Sensor R/O: 2.0.0.XXX Legal
0 - Range 0 Range (88) Admin; Engineer;
1 - Range 1 Meas. Tech
2 - Range 2 Operator; Auditor
3 - Range 3
Object Parameter Listing 723
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Sensor
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
4 - Range 4
5 - Range 5
6 - Range 6
7 - Range 7
8 - Range 8
9 - Range 9
10 - Range 10
253 - Special
FLNG_TYPE Flange Type ENUM16 Traditional (12) Flange Type R/O: 2.0.0.XXX Legal
12 - Traditional (89) Admin; Engineer;
13 - Coplanar Meas. Tech
14 - Remote Seal Operator; Auditor
15 - Level; 3in; 150lb
16 - Level; 4in; 150lb
17 - Level; 3in; 300lb
18 - Level; 4in; 300lb
19 - Level; DN 80; PN 40
20 - Level; DN 100; PN 40
21 - Level; DN 100; PN 10/16
22 - Level; 2 in; 150lb
23 - Level; 2in; 300lb
24 - Level; DN 50; PN 6
25 - Level; DN 50; PN 40
44 - 1/2in; NPTF
45 - DIN16288G 1/2 A male
46 - 1/4in; NPTF
240 - Auto Clave F-250-C
241 - Tri-Clamp
242 - Fractional Line Fit
243 - 1/8in; NPTF
244 - VCR
245 - PMC
246 - Traditional RC 1/4
247 - Traditional RC 1/2
724 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Sensor
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
252 - Unknown
253 - Special
FLNG_MAT Flange Material ENUM16 316 Stainless Steel Sensor R/O: 2.0.0.XXX Legal
0 - Carbon Steel (2) Material (90) Admin; Engineer;
1 - Undefined Meas. Tech
2 - 316 Stainless Steel Operator; Auditor
3 - Hastelloy C
4 - Monel
5 - Tantallum
15 - Gold Monel
24 - Kynar
25 - Gold Monel
30 - Hastelloy C276
34 - PTFE Coated 316L SST
35 - Gold Plated Hastelloy
C276
239 - Monel 400
251 - None
252 - Unknown
253 - Special
ORING_MTL O-ring Material ENUM16 PTFE Graphite (37) O-ring R/O: 2.0.0.XXX Legal
10 - PTFE (Teflon R) Material (91) Admin; Engineer;
11 - Viton Meas. Tech
12 - Buna-N Operator; Auditor
13 - Ethyl-Prop
36 - PTFE Glass
37 - PTFE Graphite
251 - None
252 - Unknown
253 - Special
DRN_VNT_MTL Drain Vent Material ENUM16 316 Stainless Steel Sensor R/O: 2.0.0.XXX Legal
0 - Carbon Steel (2) Material (90) Admin; Engineer;
1 - Undefined Meas. Tech
2 - 316 Stainless Steel Operator; Auditor
3 - Hastelloy C
Object Parameter Listing 725
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Sensor
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
4 - Monel
5 - Tantallum
15 - Gold Monel
24 - Kynar
25 - Gold Monel
30 - Hastelloy C276
34 - PTFE Coated 316L SST
35 - Gold Plated Hastelloy
C276
239 - Monel 400
251 - None
252 - Unknown
253 - Special
ISO_MTL Module Isolate Material ENUM16 Carbon Steel (0) Sensor R/O: 2.0.0.XXX Legal
0 - Carbon Steel Material (90) Admin; Engineer;
1 - Undefined Meas. Tech
2 - 316 Stainless Steel Operator; Auditor
3 - Hastelloy C
4 - Monel
5 - Tantallum
15 - Gold Monel
24 - Kynar
25 - Gold Monel
30 - Hastelloy C276
34 - PTFE Coated 316L SST
35 - Gold Plated Hastelloy
C276
239 - Monel 400
251 - None
252 - Unknown
253 - Special
726 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Sensor
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
FILL_FLD Module Fill Fluid ENUM16 Undefined (0) Fill Fluid (92) R/O: 2.0.0.XXX Legal
0 - Undefined Admin; Engineer;
1 - Silicone Meas. Tech
2 - Inert Operator; Auditor
7 - Neobee
252 - Unknown
253 - Special
Object Parameter Listing 727
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.68 SlaveConf Parameters
Description: The SlaveConf object provides the parameters for Modbus slave configuration.
Number of Instances: 6 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-67: SlaveConf Parameters
SlaveConf
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Slave Config R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 0→5 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
T_MODE Modbus Transmission Mode ENUM16 Instance Instance: Modbus Mode R/W: 2.0.0.XXX Log Changes
0 - ASCII : 1-4: RTU (1) Selection (60) Admin; Engineer;
1 - RTU 1-4: 5-6: TCP (2) Meas. Tech
2 - TCP 0→1 R/O:
5-6: Operator; Auditor
0 →2
BYTE_ORD Byte Order ENUM16 0→1 LSB (0) Modbus Byte R/W: 2.0.0.XXX Log Changes
0 - LSB Order Admin; Engineer;
1 - MSB Selection (61) Meas. Tech
728 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
SlaveConf
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
EFM_ENB EFM Modbus Option ENUM16 0→1 Disable (0) Enable/Disable R/W: 2.0.0.XXX Log Changes
0 - Disable Selection (30) Admin; Engineer;
1 - Enable Meas. Tech
R/O:
Operator; Auditor
DATE_REG EFM Date Register UINT16 7046 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
TIME_REG EFM Time Register UINT16 7047 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
EVT_REG Alarm/Event Register UINT16 32 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DAY_IDX_1 Station 1 - Day Idx Reg UINT16 7160 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
HR_IDX_1 Station 1 - Hr Idx Reg UINT16 7161 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DAY_REG_1 Station 1 - Day Hist Reg UINT16 703 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
Object Parameter Listing 729
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
SlaveConf
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
HR_REG_1 Station 1 - Hr Hist Reg UINT16 704 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
EFM1_HIST1 Station 1 - EFM Hist Val 1 ObjectRef Hist Hist_2401 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
EFM1_NUM_HIST Station 1 - Num of Hist UINT16 1→60 8 R/W: 2.0.0.XXX Log Changes
Points Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DAY_IDX_2 Station 2 - Day Idx Reg UINT16 7211 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
HR_IDX_2 Station 2 - Hr Idx Reg UINT16 7212 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DAY_REG_2 Station 2 - Day Hist Reg UINT16 705 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
HR_REG_2 Station 2 - Hr Hist Reg UINT16 706 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
730 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
SlaveConf
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
EFM2_HIST1 Station 2 - EFM Hist Val 1 ObjectRef Hist Hist_3201 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
EFM2_NUM_HIST Station 2 - Num of Hist UINT16 1→60 8 R/W: 2.0.0.XXX Log Changes
Points Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
MODBUS_ADDR Modbus Slave Address UINT8 1→247 1 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
TCP_ENABLE Modbus TCP Enable/Disable ENUM16 0→1 Enable (1) Enable/Disable R/W: 2.0.0.XXX Log Changes
0 - Disable Selection (30) Admin; Engineer;
1 - Enable Meas. Tech
R/O:
Operator; Auditor
TCP_PORT_NUM Modbus TCP Port Num UINT16 502 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DAY_IDX_3 Station 3 - Day Idx Reg UINT16 7262 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
HR_IDX_3 Station 3 - Hr Idx Reg UINT16 7263 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
Object Parameter Listing 731
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
SlaveConf
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
DAY_REG_3 Station 3 - Day Hist Reg UINT16 707 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
HR_REG_3 Station 3 - Hr Hist Reg UINT16 708 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
EFM3_HIST1 Station 3 - EFM Hist Val 1 OBJREF Hist Hist_4001 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
EFM3_NUM_HIST Station 3 - Num of Hist UINT16 1 60 8 R/W: 2.0.0.XXX Log Changes
Points Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DAY_IDX_4 Station 4 - Day Idx Reg UINT16 7313 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
HR_IDX_4 Station 4 - Hr Idx Reg UINT16 7314 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DAY_REG_4 Station 4 - Day Hist Reg UINT16 709 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
732 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
SlaveConf
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
HR_REG_4 Station 4 - Hr Hist Reg UINT16 710 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
EFM4_HIST1 Station 4 - EFM Hist Val 1 OBJREF Hist Hist_4801 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
EFM4_NUM_HIST Station 4 - Num of Hist UINT16 1 60 8 R/W: 2.0.0.XXX Log Changes
Points Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DAY_IDX_5 Station 5 - Day Idx Reg UINT16 7364 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
HR_IDX_5 Station 5 - Hr Idx Reg UINT16 7365 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DAY_REG_5 Station 5 - Day Hist Reg UINT16 711 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
HR_REG_5 Station 5 - Hr Hist Reg UINT16 712 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
Object Parameter Listing 733
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
SlaveConf
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
EFM5_HIST1 Station 5 - EFM Hist Val 1 OBJREF Hist Hist_5601 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
EFM5_NUM_HIST Station 5 - Num of Hist UINT16 1 60 8 R/W: 2.0.0.XXX Log Changes
Points Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DAY_IDX_6 Station 6 - Day Idx Reg UINT16 7415 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
HR_IDX_6 Station 6 - Hr Idx Reg UINT16 7416 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DAY_REG_6 Station 6 - Day Hist Reg UINT16 713 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
HR_REG_6 Station 6 - Hr Hist Reg UINT16 714 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
EFM6_HIST1 Station 6 - EFM Hist Val 1 OBJREF Hist Hist_6401 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
734 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
SlaveConf
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
EFM6_NUM_HIST Station 6 - Num of Hist UINT16 1 60 8 R/W: 2.0.0.XXX Log Changes
Points Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DAY_IDX_7 Station 7 - Day Idx Reg UINT16 7466 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
HR_IDX_7 Station 7 - Hr Idx Reg UINT16 7467 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DAY_REG_7 Station 7 - Day Hist Reg UINT16 715 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
HR_REG_7 Station 7 - Hr Hist Reg UINT16 716 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
EFM7_HIST1 Station 7 - EFM Hist Val 1 OBJREF Hist Hist_7201 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
EFM7_NUM_HIST Station 7 - Num of Hist UINT16 1 60 8 R/W: 2.0.0.XXX Log Changes
Points Admin; Engineer;
Meas. Tech
Object Parameter Listing 735
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
SlaveConf
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
DAY_IDX_8 Station 8 - Day Idx Reg UINT16 7517 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
HR_IDX_8 Station 8 - Hr Idx Reg UINT16 7518 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DAY_REG_8 Station 8 - Day Hist Reg UINT16 717 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
HR_REG_8 Station 8 - Hr Hist Reg UINT16 718 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
EFM8_HIST1 Station 8 - EFM Hist Val 1 OBJREF Hist Hist_8001 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
EFM8_NUM_HIST Station 8 - Num of Hist UINT16 1 60 8 R/W: 2.0.0.XXX Log Changes
Points Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
EFM_APP_EVNT_EN EFM Application Event ENUM16 0 1 Disable (0) Enable/Disable R/W: 2.3.0.XXX Log Changes
B Enable Selection (30) Admin; Engineer;
Meas. Tech
736 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
SlaveConf
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
0 - Disable R/O:
1 - Enable Operator; Auditor
ENRON_EVNT_REG_ Enable Enron Event Register ENUM16 0 1 Disable (0) Enable/Disable R/W: 2.3.0.XXX Log Changes
ENB Format Selection (30) Admin
0 - Disable R/O:
1 - Enable Engineer; Meas.
Tech; Operator;
Auditor
EFM_HIST_TIME_ EFM History Time Format ENUM16 0 1 HHMM (0) EFM Hist Time R/W: 2.3.0.XXX Log Changes
FORMAT 0 - HHMM Format (345) Admin; Engineer;
1 - HHMMSS Meas. Tech
R/O:
Operator; Auditor
MBS_HIST_TIME_ST Timestamp Mode ENUM16 0 -> 1 1 Historical Log R/W: 2.14.0.XXX Log Changes
AMP Timestamp Admin; Engineer;
Mode (319) Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 737
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.69 Station Parameters
Description: The Station object provides the parameters for configuring stations.
Number of Instances: 36 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-68: Station Parameters
Station
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/O: 2.9.XXX.XXX ▪ Log Changes
“Station_X” (where Operator; Auditor ▪ Legal
X is instance
number between 1
and 36)
OBJ_AREA Area Assignment UINT8 0→5 0 R/O: 2.9.XXX.XXX Log Changes
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.9.XXX.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 Undefined R/O: 2.9.XXX.XXX ▪ Log Changes
Operator; Auditor ▪ Legal
HIST_GRP_OBJ History Group ObjectRef Hist Instance: R/O: 2.9.XXX.XXX Legal
Grp “Liq Prod_X” (where Admin; Engineer;
X is instance Meas. Tech
number between 1 Operator; Auditor
and 36)
FLD_TYPE Fluid Type ENUM16 0→1 Natural Gas (0) Fluid Type (73) R/O: 2.9.XXX.XXX ▪ Log Changes
0 - Natural Gas Operator; Auditor ▪ Legal
1 - Liquid Allocation
PB_OPT Base Pressure Selection ENUM16 0→7 14.73 psi(a) (3) Base Pressure R/O: 2.9.XXX.XXX ▪ Log Changes
0 - User (263) Operator; Auditor ▪ Legal
738 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Station
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
1 - 14.65 psi(a)
2 - 14.696 psi(a)
3 - 14.73 psi(a)
4 - 15.025 psi(a)
5 - 101.325 kPa(a)
6 - 0.101325 MPa(a)
7 - 1.01325 bar(a)
PB_USER User Base Pressure DOUBLE 14.73 psi(a) (2-0) R/O: 2.9.XXX.XXX ▪ Log Changes
0.0001 Operator; Auditor ▪ Legal
PB_SEL Selected Base Pressure DOUBLE 14.73 psi(a) (2-0) R/O: 2.9.XXX.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Operator; Auditor
TB_OPT Base Temperature Selection ENUM16 0→5 60°F (1) Base R/O: 2.9.XXX.XXX ▪ Log Changes
0 - User Temperature Operator; Auditor ▪ Legal
1 - 60°F (74)
2 - 15°C
3 - 20°C
4 - 30°C
5 - 0°C
TB_USER User Base Temperature DOUBLE –200→ 60 °F (3-0) R/O: 2.9.XXX.XXX ▪ Log Changes
400 Operator; Auditor ▪ Legal
TB_SEL Selected Base Temperature DOUBLE 60 °F (3-0) R/O: 2.9.XXX.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Operator; Auditor
LATITUDE Latitude DOUBLE –90 45 ° (20-0) R/O: 2.9.XXX.XXX ▪ Log Changes
→ Operator; Auditor ▪ Legal
90
ELEVATION Elevation DOUBLE –100 0 ft (8-0) R/O: 2.9.XXX.XXX ▪ Log Changes
→ Operator; Auditor ▪ Legal
20000
ZF_METHOD Compressibility/Density ENUM16 0→19 AGA8 1994 Detailed Density/ R/O: 2.9.XXX.XXX ▪ Log Changes
Calculation (0) Compress Calc Operator; Auditor ▪ Legal
0 - AGA8 1994 Detailed Selection (54)
Object Parameter Listing 739
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Station
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
1 - AGA8 1994 Gross 1
2 - AGA8 1994 Gross 2
3 - ISO12213-2 2009
4 - SGERG 1991
CV/RD/CO2/H2 (Std)
5 - SGERG 1991
CV/RD/N2/H2
6 - SGERG 1991
RD/N2/CO2/H2
7 - SGERG 1991
CV/N2/CO2/H2
8 - ISO12213-3 2006
CV/RD/CO2/H2 (Pref)
9 - ISO12213-3 2006
N2/CV/RD/H2 (Set B)
10 - ISO12213-3 2006
N2/CO2/RD/H2 (Set C)
11 - ISO12213-3 2006
N2/CO2/CV/H2 (Set D)
12 - NX-19 1962 (Z VDI/VDE)
13 - NX-19 Mod
14 - NX-19 VDE/VDI
15 - AGA8 Part 1 2017
Detailed
17 - AGA8 Part 1 2017 Gross
1
18 - AGA8 Part 1 2017 Gross
2
19 - AGA8 Part 2 2017 / GERG
2008
20 -
HV_METHOD Heating Value Calc Standard ENUM16 0→4 GPA2172 2009 Gross Heating Value R/O: 2.9.XXX.XXX ▪ Log Changes
0 - GPA2172 2009 Gross (0) Calculation Operator; Auditor ▪ Legal
1 - ISO6976 1995 Superior Selection (55)
2 - ISO6976 1995 Inferior
740 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Station
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
3 - AGA5 2009 Gross
5 - AGA5 2009 Net
HV_MEAS_BASIS Heating Value Measurement ENUM16 0→1 Volume (0) HV R/O: 2.9.XXX.XXX ▪ Log Changes
Basis Measurement Operator; Auditor ▪ Legal
0 - Volume Basis (181)
1 - Mass
HV_COMB_REF Heating Value Combustion ENUM16 0→4 60°F (0) Heating Value R/O: 2.9.XXX.XXX ▪ Log Changes
Temperature Combustion Operator; Auditor ▪ Legal
0 - 60°F Reference (56)
1 - 0°C
2 - 15°C
3 - 20°C
4 - 25°C
H2O_CONTENT_ Water Content Basis ENUM16 0→3 Dry (0) H2O Content R/O: 2.9.XXX.XXX ▪ Log Changes
BASIS Basis (70) Operator; Auditor ▪ Legal
0 - Dry
1 - Saturated at Base
Conditions
3 - Partially Saturated
H2O_CONTENT_ Water Content Calculation ENUM16 0→0 IGT Bulletin 8 (0) Water Content R/O: 2.9.XXX.XXX ▪ Log Changes
METHOD 0 - IGT Bulletin 8 Calc Standard Operator; Auditor ▪ Legal
(75)
H2O_ADJ_OPT Water Adjustment Option ENUM16 0→1 No Adjustment (0) Water R/O: 2.9.XXX.XXX ▪ Log Changes
0 - No Adjustment Adjustment Operator; Auditor ▪ Legal
1 - Adjust Composition Option (182)
ATMPR_UMODE Atm Pressure Mode ENUM16 1→2 Override (1) User Mode R/O: 2.9.XXX.XXX ▪ Log Changes
1 - Override Selection 2 (97) Operator; Auditor ▪ Legal
2 - Calculated
ATMPR_CALC Calculated Atm Pressure DOUBLE 0 14.696 psi(a) (2-0) R/O: 2.9.XXX.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
ATMPR_OVRD Override Atm Pressure DOUBLE 0 14.696 psi(a) (2-0) R/O: 2.9.XXX.XXX ▪ Log Changes
Operator; Auditor ▪ Legal
Object Parameter Listing 741
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Station
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
ATMPR_SEL Selected Atm Pressure DOUBLE 0 14.696 psi(a) (2-0) R/O: 2.9.XXX.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
GRAV_UMODE Local Grav Acceleration ENUM16 1→2 Calculated (2) User Mode R/O: 2.9.XXX.XXX ▪ Log Changes
Mode Selection 2 (97) Operator; Auditor ▪ Legal
1 - Override
2 - Calculated
GRAV_CALC Calc Local Grav Acceleration DOUBLE 0 32.14398 ft/s² (19-0) R/O: 2.9.XXX.XXX Legal
Operator; Auditor
GRAV_OVRD Override Local Grav DOUBLE 0 32.14398 ft/s² (19-0) R/O: 2.9.XXX.XXX ▪ Log Changes
Acceleration Operator; Auditor ▪ Legal
GRAV_SEL Selected Local Grav DOUBLE 0 32.14398 ft/s² (19-0) R/O: 2.9.XXX.XXX Legal
Acceleration Admin; Engineer;
Meas. Tech
Operator; Auditor
CALC_FAIL_OPT Calculation Failure Option ENUM16 0→2 Alarm and Continue Calculation R/O: 2.9.XXX.XXX ▪ Log Changes
0 - Alarm Disabled (1) Fault Option Operator; Auditor ▪ Legal
1 - Alarm and Continue (65)
2 - Alarm and Halt
Calculation
DIFF_PRESS_UNITS Differential Pressure Units ENUM16 0→6 inH2O@60°F (0) Differential R/O: 2.9.XXX.XXX ▪ Log Changes
0 - inH2O@60°F Pressure Operator; Auditor ▪ Legal
1 - inH2O@68°F Selection (26)
2 - kPa
3 - mbar
4 - kg/cm²
5 - psi
6 - bar
PRESS_UNITS Pressure Units ENUM16 0→4 psi (0) Pressure (78) R/O: 2.9.XXX.XXX ▪ Log Changes
0 - psi Operator; Auditor ▪ Legal
1 - kPa
2 - MPa
3 - bar
4 - kg/cm²
742 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Station
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
TEMP_UNITS Temperature Units ENUM16 0→2 °F (0) Temperature R/O: 2.9.XXX.XXX ▪ Log Changes
0 - °F (3) Operator; Auditor ▪ Legal
1 - °C
2-K
DENS_UNITS Density Units ENUM16 0→8 lb/ft³ (0) Gas Density (4) R/O: 2.9.XXX.XXX ▪ Log Changes
0 - lb/ft³ Operator; Auditor ▪ Legal
1 - kg/m³
2 - g/cc
3 - lb/MMCF
4 - lb/US gal
5 - kg/L
6 - lb/bbl
7 - RD
8 - °API
O_DENS_UNITS Oil Density Units ENUM16 0→8 °API (8) Gas Density (4) R/O: 2.9.XXX.XXX ▪ Log Changes
0 - lb/ft³ Operator; Auditor ▪ Legal
1 - kg/m³
2 - g/cc
3 - lb/MMCF
4 - lb/US gal
5 - kg/L
6 - lb/bbl
7 - RD
8 - °API
W_DENS_UNITS Water Density Units ENUM16 0→8 g/cc (2) Gas Density (4) R/O: 2.9.XXX.XXX ▪ Log Changes
0 - lb/ft³ Operator; Auditor ▪ Legal
1 - kg/m³
2 - g/cc
3 - lb/MMCF
4 - lb/US gal
5 - kg/L
6 - lb/bbl
7 - RD
8 - °API
Object Parameter Listing 743
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Station
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
VOL_HV_UNITS Volume Based Heating Value ENUM16 0→1 Btu/ft³ (0) Volume R/O: 2.9.XXX.XXX ▪ Log Changes
Units Heating Value Operator; Auditor ▪ Legal
0 - Btu/ft³ (5)
1 - MJ/m³
MASS_HV_UNITS Mass Based Heating Value ENUM16 0→1 Btu/lb (0) Mass Heating R/O: 2.9.XXX.XXX ▪ Log Changes
Units Value (225) Operator; Auditor ▪ Legal
0 - Btu/lb
1 - MJ/kg
DYN_VISC_UNITS Viscosity Units ENUM16 0→1 lb/ft-s (1) Dynamic R/O: 2.9.XXX.XXX ▪ Log Changes
0 - cP Viscosity (6) Operator; Auditor ▪ Legal
1 - lb/ft-s
H2O_CONTENT_ Water Content Units ENUM16 0→1 lb/MMSCF (0) Water Content R/O: 2.9.XXX.XXX ▪ Log Changes
UNITS 0 - lb/MMSCF (21) Operator; Auditor ▪ Legal
1 - kg/(k)m³
LIN_LONG_UNITS Linear Long Units ENUM16 0→1 ft (0) Linear (Long) R/O: 2.9.XXX.XXX ▪ Log Changes
0 - ft (8) Operator; Auditor ▪ Legal
1-m
LIN_SHRT_UNITS Linear Short Units ENUM16 0→1 in (0) Linear (Short) R/O: 2.9.XXX.XXX ▪ Log Changes
0 - in (7) Operator; Auditor ▪ Legal
1 - mm
VOL_TOT_UNITS Volume Units for Totals ENUM16 0→8 MCF (2) Volume Total R/O: 2.9.XXX.XXX ▪ Log Changes
0 - ft³ (9) Operator; Auditor ▪ Legal
1 - m³
2 - MCF
3 - (k)m³
4 - MMCF
5 - BCF
6-L
7 - US gal
8 - bbl
O_VOL_TOT_UNITS Oil Volume Total Units ENUM16 0→8 bbl (8) Volume Total R/O: 2.9.XXX.XXX ▪ Log Changes
0 - ft³ (9) Operator; Auditor ▪ Legal
1 - m³
2 - MCF
3 - (k)m³
744 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Station
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
4 - MMCF
5 - BCF
6-L
7 - US gal
8 - bbl
W_VOL_TOT_UNITS Water Volume Total Units ENUM16 0→8 bbl (8) Volume Total R/O: 2.9.XXX.XXX ▪ Log Changes
0 - ft³ (9) Operator; Auditor ▪ Legal
1 - m³
2 - MCF
3 - (k)m³
4 - MMCF
5 - BCF
6-L
7 - US gal
8 - bbl
MASS_TOT_UNITS Mass Units for Totals ENUM16 0→ 4 Mlb (2) Mass Total (10) R/O: 2.9.XXX.XXX ▪ Log Changes
0 - lb Operator; Auditor ▪ Legal
1 - kg
2 - Mlb
3 - tonne
4 - ton
ENERGY_TOT_UNIT Energy Units for Totals ENUM16 0→7 MMBtu (1) Energy Total R/O: 2.9.XXX.XXX ▪ Log Changes
S 0 - Btu (11) Operator; Auditor ▪ Legal
1 - MMBtu
2-J
3 - MJ
4 - GJ
5 - Dth
6 - TJ
7 - PJ
VOL_RATE_UNITS Volume Units for Rates ENUM16 0→35 MCF/d (7) Volume Rate R/O: 2.9.XXX.XXX ▪ Log Changes
0 - ft³/s (12) Operator; Auditor ▪ Legal
1 - ft³/min
2 - ft³/h
3 - ft³/d
Object Parameter Listing 745
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Station
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
4 - MCF/s
5 - MCF/min
6 - MCF/h
7 - MCF/d
8 - m³/s
9 - m³/min
10 - m³/h
11 - m³/d
12 - (k)m³/s
13 - (k)m³/min
14 - (k)m³/h
15 - (k)m³/d
16 - MMCF/s
17 - MMCF/min
18 - MMCF/h
19 - MMCF/d
20 - BCF/s
21 - BCF/min
22 - BCF/h
23 - BCF/d
24 - L/s
25 - L/min
26 - L/h
27 - L/d
28 - US gal/s
29 - US gal/min
30 - US gal/h
31 - US gal/d
32 - bbl/s
33 - bbl/min
34 - bbl/h
35 - bbl/d
O_VOL_RATE_UNITS Oil Volume Rate Units ENUM16 0→35 bbl/d (35) Volume Rate R/O: 2.9.XXX.XXX ▪ Log Changes
0 - ft³/s (12) Operator; Auditor ▪ Legal
1 - ft³/min
746 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Station
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
2 - ft³/h
3 - ft³/d
4 - MCF/s
5 - MCF/min
6 - MCF/h
7 - MCF/d
8 - m³/s
9 - m³/min
10 - m³/h
11 - m³/d
12 - (k)m³/s
13 - (k)m³/min
14 - (k)m³/h
15 - (k)m³/d
16 - MMCF/s
17 - MMCF/min
18 - MMCF/h
19 - MMCF/d
20 - BCF/s
21 - BCF/min
22 - BCF/h
23 - BCF/d
24 - L/s
25 - L/min
26 - L/h
27 - L/d
28 - US gal/s
29 - US gal/min
30 - US gal/h
31 - US gal/d
32 - bbl/s
33 - bbl/min
34 - bbl/h
35 - bbl/d
Object Parameter Listing 747
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Station
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
W_VOL_RATE_UNIT Water Volume Rate Units ENUM16 0→35 bbl/d (35) Water Volume R/O: 2.9.XXX.XXX ▪ Log Changes
S 0 - ft³/s Rate (299) Operator; Auditor ▪ Legal
1 - ft³/min
2 - ft³/h
3 - ft³/d
4 - MCF/s
5 - MCF/min
6 - MCF/h
7 - MCF/d
8 - m³/s
9 - m³/min
10 - m³/h
11 - m³/d
12 - (k)m³/s
13 - (k)m³/min
14 - (k)m³/h
15 - (k)m³/d
16 - MMCF/s
17 - MMCF/min
18 - MMCF/h
19 - MMCF/d
20 - BCF/s
21 - BCF/min
22 - BCF/h
23 - BCF/d
24 - L/s
25 - L/min
26 - L/h
27 - L/d
28 - US gal/s
29 - US gal/min
30 - US gal/h
31 - US gal/d
32 - bbl/s
33 - bbl/min
748 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Station
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
34 - bbl/h
35 - bbl/d
MASS_RATE_UNITS Mass Units for Rates ENUM16 0→19 Mlb/d (7) Mass Rate (13) R/O: 2.9.XXX.XXX ▪ Log Changes
0 - lb/s Operator; Auditor ▪ Legal
1 - lb/min
2 - lb/h
3 - lb/d
4 - Mlb/s
5 - Mlb/min
6 - Mlb/h
7 - Mlb/d
8 - kg/s
9 - kg/min
10 - kg/h
11 - kg/d
12 - tonne/s
13 - tonne/min
14 - tonne/h
15 - tonne/d
16 - ton/s
17 - ton/min
18 - ton/h
19 - ton/d
ENERGY_RATE_ Energy Units for Rates ENUM16 0→31 MMBtu/d (7) Energy Rate R/O: 2.9.XXX.XXX ▪ Log Changes
UNITS 0 - Btu/s (14) Operator; Auditor ▪ Legal
1 - Btu/min
2 - Btu/h
3 - Btu/d
4 - MMBtu/s
5 - MMBtu/min
6 - MMBtu/h
7 - MMBtu/d
8 - J/s
9 - J/min
10 - J/h
Object Parameter Listing 749
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Station
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
11 - J/d
12 - MJ/s
13 - MJ/min
14 - MJ/h
15 - MJ/d
16 - GJ/s
17 - GJ/min
18 - GJ/h
19 - GJ/d
20 - Dth/s
21 - Dth/min
22 - Dth/h
23 - Dth/d
24 - TJ/s
25 - TJ/min
26 - TJ/h
27 - TJ/d
28 - PJ/s
29 - PJ/min
30 - PJ/h
31 - PJ/d
VOL_KF_UNITS Volumetric K-factor Units ENUM16 0→3 pulses/ft³ (0) Volumetric K- R/O: 2.9.XXX.XXX ▪ Log Changes
0 - pulses/ft³ Factor (27) Operator; Auditor ▪ Legal
1 - pulses/m³
2 - pulses/US gal
3 - pulses/bbl
MASS_KF_UNITS Mass K-factor Units ENUM16 0→1 pulses/lb (0) Mass K-Factor R/O: 2.9.XXX.XXX ▪ Log Changes
0 - pulses/lb (28) Operator; Auditor ▪ Legal
1 - pulses/kg
UVOL_RATE Uncorrected Volume Flow DOUBLE 0 MCF/d (12-7) R/O: 2.9.XXX.XXX Legal
Rate Admin; Engineer;
Meas. Tech
Operator; Auditor
SVOL_RATE Corrected Volume Flow Rate DOUBLE 0 MCF/d (12-7) R/O: 2.9.XXX.XXX Legal
Admin; Engineer;
750 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Station
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
Operator; Auditor
MASS_RATE Mass Flow Rate DOUBLE 0 Mlb/d (13-7) R/O: 2.9.XXX.XXX Legal
Admin; Engineer;
Meas. Tech
Operator; Auditor
ENERGY_RATE Energy Flow Rate DOUBLE 0 MMBtu/d (14- R/O: 2.9.XXX.XXX Legal
7) Admin; Engineer;
Meas. Tech
Operator; Auditor
UVOL_RAW_TOT Uncorrected Volume Total DOUBLE 0 MCF (9-2) R/O: 2.9.XXX.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
SVOL_RAW_TOT Corrected Volume Total DOUBLE 0 MCF (9-2) R/O: 2.9.XXX.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
MASS_RAW_TOT Mass Total DOUBLE 0 Mlb (10-2) R/O: 2.9.XXX.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
ENERGY_RAW_TOT Energy Total DOUBLE 0 MMBtu (11-1) R/O: 2.9.XXX.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
UVOL_TOT_OBJ Uncorrected Volume Total ObjectRef Total Varies by instance R/O: 2.9.XXX.XXX ▪ Log Changes
Object Admin; Engineer; ▪ Legal
Meas. Tech;
Operator; Auditor
SVOL_TOT_OBJ Corrected Volume Total ObjectRef Total Varies by instance R/O: 2.9.XXX.XXX ▪ Log Changes
Object Admin; Engineer; ▪ Legal
Meas. Tech;
Operator; Auditor
Object Parameter Listing 751
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Station
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
MASS_TOT_OBJ Mass Total Object ObjectRef Total Varies by instance R/O: 2.9.XXX.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech;
Operator; Auditor
ENERGY_TOT_OBJ Energy Total Object ObjectRef Total Varies by instance R/O: 2.9.XXX.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech;
Operator; Auditor
FLW_ALM_OBJ Flow Alarm Object ObjectRef Varies by instance R/O: 2.9.XXX.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech;
Operator; Auditor
BUYER Custody Transfer Buyer UC40 Undefined R/O: 2.9.XXX.XXX ▪ Log Changes
Operator; Auditor ▪ Legal
SELLER Custody Transfer UC40 Undefined R/O: 2.9.XXX.XXX ▪ Log Changes
Seller/Producer Operator; Auditor ▪ Legal
STN_ID1 Station Identifier 1 UC20 Undefined R/O: 2.9.XXX.XXX ▪ Log Changes
Operator; Auditor ▪ Legal
STN_ID2 Station Identifier 2 UC20 Undefined R/O: 2.9.XXX.XXX ▪ Log Changes
Operator; Auditor ▪ Legal
LIQ_PROD_OBJ Liquid Product Object ObjectRef Instance: R/O: 2.9.XXX.XXX ▪ Log Changes
“Liq Prod_X” (where Operator; Auditor ▪ Legal
X is instance
number between 1
and 36)
OIL_METHOD Oil Flow Calculation Method ENUM16 0 1 0 R/O: 2.9.XXX.XXX ▪ Log Changes
0 - API Ch 12.2 Operator; Auditor ▪ Legal
1 - API Ch 20.1
WATER_OPT API Ch 20.1 Water Option ENUM16 0 1 0 R/O: 2.9.XXX.XXX ▪ Log Changes
0 – Use Oil Correction Factor Operator; Auditor ▪ Legal
for Water
1 – Use Separate Correction
Factor for Water
DENSB_SEL Selected Base Denstiy DOUBLE 0 °API (294-8) R/O: 2.9.XXX.XXX Legal
Admin; Engineer;
752 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Station
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech;
Operator; Auditor
GVOL_RATE Gross Volume Flow Rate DOUBLE 0 bbl/d (298-35) R/O: 2.9.XXX.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
SVOL_O_RATE Net Standard Volume Flow DOUBLE 0 bbl/d (298-35) R/O: 2.9.XXX.XXX Legal
Rate Admin; Engineer;
Meas. Tech;
Operator; Auditor
SVOL_W_RATE Net Water Flow Rate DOUBLE 0 bbl/d (299-35) R/O: 2.9.XXX.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
GVOL_RAW_TOT Gross Volume Total DOUBLE 0 bbl (296-8) R/O: 2.9.XXX.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
SVOL_O_RAW_TOT Net Standard Volume Total DOUBLE 0 bbl (296-8) R/O: 2.9.XXX.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
SVOL_W_RAW_TOT Net Water Volume Total ObjectRef 0 bbl (297-8) R/O: 2.9.XXX.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
GVOL_TOT_OBJ Gross Volume Total Object ObjectRef Varies by instance R/O: 2.9.XXX.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
SVOL_O_TOT_OBJ Net Standard Volume Total ObjectRef Varies by instance R/O: 2.9.XXX.XXX Legal
Object Admin; Engineer;
Meas. Tech;
Operator; Auditor
Object Parameter Listing 753
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Station
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
SVOL_W_TOT_OBJ New Water Volume Total ObjectRef Varies by instance R/O: Legal
Object Admin; Engineer;
Meas. Tech;
Operator; Auditor
DENS_OPT Density Option ENUM16 0 2 1 Density Option R/O: ▪ Log Changes
0 - Station Base Density from (320) Operator; Auditor ▪ Legal
Product
1 - Meter Observed Density
2 – Station Header Density
DENSH_OBJ Header Density Object ObjectRef Liq Undefined R/O: 2.9.XXX.XXX ▪ Log Changes
Dens Operator; Auditor ▪ Legal
DENSH_INUSE In Use Header Density DOUBLE 0 °API (294-8) R/O: 2.9.XXX.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
TH_INUSE In Use Header Temperature DOUBLE 0 °F (3-0) R/O: 2.9.XXX.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
PH_INUSE In Use Header Pressure DOUBLE 0 psi(g) (29-0) R/O: 2.9.XXX.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
ROUND_OPT Rounding Option ENUM16 0 1 Rounding Per API Rounding R/O: 2.9.XXX.XXX ▪ Log Changes
0 - No Rounding 12.2 (1) Option (280) Operator; Auditor ▪ Legal
1 - Rounding Per API 12.2
SF_OPT Shrinkage Factor Option ENUM16 0->1 Apply to Gross Shrinkage R/O: ▪ Log Changes
0 – Apply to Gross Standard Standard Volume(0) Factor Option Operator; Auditor ▪ Legal
Volume (354)
1 - Apply to Net Standard
Volume
FLWTM_UNITS Flow Time Units ENUM16 0->1 s (0) Flow Time R/O: ▪ Log Changes
0–s Units (359) Operator; Auditor ▪ Legal
1 - min
754 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Station
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
FAULT_CONFIG Fault Health Configuration BIN16 Fault, Fault Health R/W: ▪ Log Changes
0 -Normal Calculation Alarms, Configuration Admin; Engineer; ▪ Legal
1 – Fault Flow Rate Alarms, (360) Meas. Tech
Config Checksum R/O:
Fault, Operator; Auditor
System Fault
BATCH_ID Batch Identifier UC20 Undefined R/W: 2.12.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
BATCH_TRIG_OPT Batch Trigger Options BIN16 0->1 0 Batch Trigger R/W: 2.12.0.XXX ▪ Log Changes
Options (361) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
BATCH_START_CMD Batch Start Command ENUM16 0->1 0 Start Batch R/W: 2.12.0.XXX
Command Admin; Engineer;
(362) Meas. Tech
R/O:
Operator; Auditor
BATCH_END_CMD Batch End Command ENUM16 0->1 0 End Batch R/W: 2.12.0.XXX
Command Admin; Engineer;
(363) Meas. Tech
R/O:
Operator; Auditor
OP_STATUS Operation Status BIN32 0 Station Status R/O: 2.12.0.XXX Legal
(331) Admin; Engineer;
Meas. Tech;
Operator; Auditor
PREV_BATCH_STAR Previous Batch Start Time TIME 0 R/O: 2.12.0.XXX Legal
T_TM Admin; Engineer;
Meas. Tech;
Operator; Auditor
Object Parameter Listing 755
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Station
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
PREV_BATCH_END_ Previous Batch End Time TIME 0 R/O: 2.12.0.XXX Legal
TM Admin; Engineer;
Meas. Tech;
Operator; Auditor
CUR_BATCH_START Current Batch Start Time TIME 0 R/O: 2.12.0.XXX Legal
_TM Admin; Engineer;
Meas. Tech;
Operator; Auditor
PER_HIST_OPT Hourly History Option ENUM16 0 -> 2 0 History Option R/W: 2.13.0.XXX ▪ Log Changes
(332) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
DAY_HIST_OPT Daily History Option ENUM16 0 -> 2 0 History Option R/W: 2.13.0.XXX ▪ Log Changes
(332) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
WK_HIST_OPT Weekly History Option ENUM16 0 -> 2 0 History Option R/W: 2.13.0.XXX ▪ Log Changes
(332) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
MNTH_HIST_OPT Monthly History Option ENUM16 0 -> 2 0 History Option R/W: 2.13.0.XXX ▪ Log Changes
(332) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
BATCH_OPT Batch Option ENUM16 0 -> 1 1 Batch Option R/W: 2.13.0.XXX ▪ Log Changes
(333) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
BATCH_START_PAR Batch Start Parameter PRMREF Undefined R/W: 2.13.0.XXX ▪ Log Changes
AM Admin; Engineer; ▪ Legal
756 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Station
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech
R/O:
Operator; Auditor
BATCH_END_PARA Batch Start Parameter PRMREF Undefined R/W: 2.13.0.XXX ▪ Log Changes
M Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
PREV_PER_END_TM Previous Hour End Time TIME R/O: 02.17.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Operator; Auditor
PREV_DAY_END_TM Previous Day End Time TIME R/O: 02.17.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Operator; Auditor
PREV_WK_END_TM Previous Week End Time TIME R/O: 02.17.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
Operator; Auditor
PREV_MNTH_END_T Previous Month End Time TIME R/O: 02.17.0.XXX ▪ Log Changes
M Admin; Engineer; ▪ Legal
Meas. Tech
Operator; Auditor
Object Parameter Listing 757
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.70 SysLog Parameters
Description: The SysLog object provides the parameters for configuring system log’s
Number of Instances: 1 instance may exist.
Storage Location: Saved to internal configuration memory.
Table 5-69: SysLog Parameters
SysLog
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 System Log R/W: 2.15.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 0→5 0 R/W: 2.15.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.15.0.XXX Log Changes
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech;
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
IPV4_ADDRESS IPv4 IP Address BYTE4 0x00000000 R/W: 2.15.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SERVER_PORT Server IP Port UINT16 514 R/W: 2.15.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
758 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
SysLog
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
LOG_DIAG Log Diag ENUM16 0 -> 1 Enable/Disable R/W: 2.15.0.XXX Log Changes
Selection (30) Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
LOG_EVENTS Log Events ENUM16 0 -> 1 Enable/Disable R/W: 2.15.0.XXX Log Changes
Selection (30) Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
LOG_ALARMS Log Alarms ENUM16 0 -> 1 Enable/Disable R/W: 2.15.0.XXX Log Changes
Selection (30) Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SYSLOG_INST SysLog Interface ENUM16 1 -> 2 1 Ethernet R/W: 2.15.0.XXX Log Changes
Interface (407) Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
LOG_DNP_SECURIT Log DNP3 Security Log ENUM16 0 -> 1 Enable/Disable R/W: 2.15.0.XXX Log Changes
Y Selection (30) Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 759
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.71 System Parameters
Description: The System object provides the parameters for configuring and viewing information on the system as a
whole.
Number of Instances: 1 instance may exist.
Storage Location: Saved to internal configuration memory.
Table 5-70: System Parameters
System
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 System R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 0→5 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech;
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
PROD_TYPE Product Type ENUM16 FB1100 (0) Product Type R/O: 2.0.0.XXX
0 - FB1100 (93) Admin; Engineer;
1 - FB1200 Meas. Tech;
2 - FB2100 Operator; Auditor
3 - FB2200
4 - FB3000
5 – I/O Scanner
760 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
System
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
PROD_DESC Product Description UC40 RTU R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech;
Operator; Auditor
SITE_NAME Site Name UC40 Undefined R/W: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DEV_TEST_DATE Device Test Date Time Undefined R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech;
Operator; Auditor
DEV_SER_NUM Device Serial Number UC30 Undefined R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech;
Operator; Auditor
CONN_TEST_DATE Connectivity Board Test Date Time Undefined R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech;
Operator; Auditor
CONN_SER_NUM Connectivity Board Serial UC30 Undefined R/O: 2.0.0.XXX
Number Admin; Engineer;
Meas. Tech;
Operator; Auditor
PKG_VER Package Version UC20 1.0.0.0 R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech;
Operator; Auditor
MAX_STN Max Number Stations UINT32 0→24 1 R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech;
Operator; Auditor
Object Parameter Listing 761
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
System
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
MAX_STRM Max Number Streams UINT32 0→24 1 R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech;
Operator; Auditor
MAX_PID Max Number PID UINT32 0→24 0 R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech;
Operator; Auditor
NUM_ALM Number Alarm Records UINT32 1000→ 1000 R/O: 2.0.0.XXX
2500 Admin; Engineer;
Meas. Tech;
Operator; Auditor
NUM_EVT Number Event Records UINT32 1000→ 1000 R/O: 2.0.0.XXX
2500 Admin; Engineer;
Meas. Tech;
Operator; Auditor
NUM_WM_EVT Number W&M Events UINT32 1000→ 1000 R/O: 2.0.0.XXX
2500 Admin; Engineer;
Meas. Tech;
Operator; Auditor
MPU_LOAD MPU Loading FLOAT 0→100 0 % (18-0) R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech;
Operator; Auditor
SYS_INTEG System Integrity BIN32 Normal Composite R/O: 2.0.0.XXX
0 - Normal System Admin; Engineer;
1 - Alarm Integrity (33) Meas. Tech;
2 - Fault Operator; Auditor
RESTART_TM Restart Time Time Undefined R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech;
Operator; Auditor
BATT_TYPE Battery Type ENUM16 None (0) Battery Type R/O: 2.0.0.XXX
0 - None (72) Admin; Engineer;
1 - Lithium
762 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
System
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
2 - Lead Acid Meas. Tech;
3 - Not Applicable Operator; Auditor
MFG_ID Manufacturer ID UC20 Emerson R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech;
Operator; Auditor
MODEL_SPEC_1 Model Specification 1 UC40 Undefined R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech;
Operator; Auditor
MODEL_SPEC_2 Model Specification 2 UC40 Undefined R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech;
Operator; Auditor
MODEL_SPEC_3 Model Specification 3 UC40 Undefined R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech;
Operator; Auditor
CPU_TEMP CPU Temperature FLOAT 0 °F (3-0) R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech;
Operator; Auditor
EVT_CONF_TYPE Event Log Configuration ENUM16 0→3 Combined Event Event Log R/W: 2.0.0.XXX ▪ Log Changes
Type Log (0) Config Type Admin; Engineer; ▪ Verified
0 - Combined Event Log (246) Meas. Tech ▪ Legal
1 - Separate Legal and Non- R/O:
Legal Event Logs Operator; Auditor
2- Separate Verifiable &
Exportable Logs
3 – BSAP Combined Event
Alarm Log
DB_RECOVERY_ Database Recovery Option ENUM16 0→1 Restore to Database Database R/W: 2.0.0.XXX ▪ Log Changes
OPTION 0 - Restore to Database Defaults (0) Recovery Admin; Engineer; ▪ Legal
Defaults Option (256) Meas. Tech
Object Parameter Listing 763
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
System
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
1 - Restore from Flash Config R/O:
File Operator; Auditor
CURRENT_CPU_ Current CPU Frequency ENUM16 0→2 Low Frequency (0) CPU Frequency R/O: 2.0.0.XXX
FREQ 0 - Low Frequency Level (261) Admin; Engineer;
1 - Medium Frequency Meas. Tech;
2 - High Frequency Operator; Auditor
FLASH_CONFIG_ Flash Config Created Time Time Undefined R/O: 2.0.0.XXX Log Changes
CREATED Admin; Engineer;
Meas. Tech;
Operator; Auditor
NUM_SYSTEM_ Number of Restarts UINT16 0 R/O: 2.0.0.XXX
RESTARTS Performed By System Admin; Engineer;
Meas. Tech;
Operator; Auditor
RADIO_POWER_ Radio Power Enable ENUM16 0→1 Disable (0) Enable/Disable R/W: 2.0.0.XXX
ENABLE 0 - Disable Selection (30) Admin; Engineer;
1 - Enable Meas. Tech
R/O:
Operator; Auditor
ACTIVE_DNP3_MAP Active DNP3 Map ENUM16 0→1 Default (0) Active DNP3 R/W: 2.0.0.XXX ▪ Log Changes
0 - Default Map (265) Admin; Engineer; ▪ Legal
1 - User Defined Meas. Tech
R/O:
Operator; Auditor
NUM_FREE_INST Number of Free Instances UINT32 0→ 0 R/O: 2.0.0.XXX
9110 Admin; Engineer;
Meas. Tech;
Operator; Auditor
NUM_FREE_SMALL_ Number of Free Small Chunk UINT32 0→ 0 R/O: 2.0.0.XXX
CHUNK Blocks 272580 Admin; Engineer;
Meas. Tech;
Operator; Auditor
NUM_FREE_MED_ Number of Free Medium UINT32 0→ 0 R/O: 2.0.0.XXX
CHUNK Chunk Blocks 35230 Admin; Engineer;
764 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
System
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech;
Operator; Auditor
NUM_FREE_BIG_ Number of Free Big Chunk UINT32 0→ 0 R/O: 2.0.0.XXX
CHUNK Blocks 14180 Admin; Engineer;
Meas. Tech;
Operator; Auditor
NUM_FREE_PRM_ Number of Free Params in UINT32 0→ 0 R/O: 2.0.0.XXX
TR_TBL Translator Tbl 22000 Admin; Engineer;
Meas. Tech;
Operator; Auditor
NUM_FREE_PRM_ Number of Free Params UINT32 0→ 0 R/O: 2.0.0.XXX
REFS Type PRMRef 24000 Admin; Engineer;
Meas. Tech;
Operator; Auditor
NUM_FREE_OBJ_ Number of Free Params UINT32 0→ 0 R/O: 2.0.0.XXX
REFS Type OBJRef 18000 Admin; Engineer;
Meas. Tech;
Operator; Auditor
FLASH_USED Number of File System bytes UINT32 0 Kilobytes (267- R/O: 2.0.0.XXX
used 1) Admin; Engineer;
Meas. Tech;
Operator; Auditor
FLASH_FREE Number of File System bytes UINT32 0 Kilobytes (267- R/O: 2.0.0.XXX
free 1) Admin; Engineer;
Meas. Tech;
Operator; Auditor
SYSTEM_MEMORY_ Number of System Memory UINT32 0 Kilobytes (267- R/O: 2.0.0.XXX
USED bytes used 1) Admin; Engineer;
Meas. Tech;
Operator; Auditor
SYSTEM_MEMORY_ Number of System Memory UINT32 0 Kilobytes (267- R/O: 2.0.0.XXX
FREE bytes free 1) Admin; Engineer;
Meas. Tech;
Operator; Auditor
Object Parameter Listing 765
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
System
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
HOME_SCREEN Home Screen UC40 R/W: 2.4.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
VERIFICATION_ System Verification Status ENUM16 0→1 System Unverified System R/O: 2.5.0.XXX ▪ Log Changes
STATUS 0 - System Unverified (0) Verification Admin; Engineer; ▪ Legal
1 - System Verified Status (350) Meas. Tech;
Operator; Auditor
VERIFICATION_TIM Verification Time TIME R/O: 2.5.0.XXX
E Admin; Engineer;
Meas. Tech;
Operator; Auditor
LEGAL_EVT_LOCK_ Legal Event Lock Status ENUM16 0→1 Unlocked (0) Legal Event R/O: 2.5.0.XXX ▪ Log Changes
STAT 0 – Unlocked Lock Status Admin; Engineer; ▪ Legal
1 - Locked (355) Meas. Tech;
Operator; Auditor
LEGAL_EVT_LOCK_ Legal Event Lock Time TIME R/O: 2.5.0.XXX
TIME Admin; Engineer;
Meas. Tech;
Operator; Auditor
EVT_LAST_EXPORT_ Legal Event Last Export Time TIME R/O: 2.6.0.XXX Log Changes
TIME Admin; Engineer;
Meas. Tech;
Operator; Auditor
DB_EXT_FILE_STAT Database Save Params to ENUM16 0->1 Disabled (0) Enable/Disable R/W: 2.9.0.XXX ▪ Log Changes
US Flash File Selection (30) Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
MBUS_MAP_USE_CS Modbus Mapping using CSV ENUM16 0->1 Database Objects CSV Option R/W: 2.9.0.XXX
V Files (0) (367) Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
766 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
System
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
MBUS_MAP_STATU Modbus Mapping file status BIN32 R/O: 2.9.0.XXX
S Admin; Engineer;
Meas. Tech;
Operator; Auditor
MBUS_MAP_CSV_B Reload Modbus Map ENUM16 0->1 Ready (0) Reloading R/W: 2.9.0.XXX
USY Maps (369) Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
CHECK_INTERVAL Checksum Interval UINT16 1- R/W: 2.9.0.XXX
>1440 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SYSTEM_FIRMWARE Firmware Checksum State ENUM16 0->3 Disabled (0) Integrity R/O: 2.9.0.XXX
Status (370) Admin; Engineer;
Meas. Tech;
Operator; Auditor
VERIFY_OPT Verification Checksum ENUM16 0->1 Disabled (0) Enable/Disable R/W: 2.9.0.XXX
Selection (30) Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
FIRMWARE_CHECK Firmware Checksum UINT32 Hex Hexidecimal R/O: 2.9.0.XXX
Data (373) Admin; Engineer;
Meas. Tech;
Operator; Auditor
CONFIG_CHECK Configuration Checksum UINT32 Hex Hexidecimal R/O: 2.9.0.XXX
Data (373) Admin; Engineer;
Meas. Tech;
Operator; Auditor
CONFIG_CHECK_CO Config Change Count UINT32 R/O: 2.9.0.XXX
UNT Admin; Engineer;
Meas. Tech;
Operator; Auditor
Object Parameter Listing 767
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
System
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
CONFIG_CHECK_C Saved Config Checksum UINT32 Hex Hexidecimal R/O: 2.9.0.XXX
MP Data (373) Admin; Engineer;
Meas. Tech;
Operator; Auditor
CONFIG_CHECK_ST Config Checksum State ENUM16 0->4 Disabled (0) Integrity R/O: 2.9.0.XXX
ATE Status (372) Admin; Engineer;
Meas. Tech;
Operator; Auditor
EFM_ARCH_USE_CS EFM Archive Mapping using ENUM16 0->1 Database Objects CSV Option R/W: 2.11.0.XXX
V CSV (0) (367) Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
EFM_ARCH_STATUS EFM Archive Mapping file BIN32 R/O: 2.11.0.XXX
status Admin; Engineer;
Meas. Tech;
Operator; Auditor
EFM_ARCH_CSV_BU Reload EFM Archive Map ENUM16 0->1 Ready (0) Reloading R/W: 2.11.0.XXX
SY Maps (369) Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
MAX_NUM_PRM_RE Max Num of PRMREF in the UINT32 R/O: 2.11.0.XXX
F System Admin; Engineer;
Meas. Tech;
Operator; Auditor
MAX_NUM_OBJ_REF Max Num of OBJREF in the UINT32 R/O: 2.11.0.XXX
System Admin; Engineer;
Meas. Tech;
Operator; Auditor
TRACING Trace Enable ENUM16 0->4 Ready (0) Trace Status R/W: 2.11.0.XXX
(381) Admin; Engineer;
R/O:
Meas. Tech;
Operator; Auditor
768 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
System
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
DATA_MAP_ENABLE Data Model Mapping ENUM16 0->1 0 Enable/Disable R/W: 2.12.0.XXX Log Changes
Selection (30) Admin; Engineer;
R/O:
Meas. Tech;
Operator; Auditor
DATA_MAP_STATUS Data Model file status BIN32 0 Csv Parse R/O: 2.12.0.XXX
Status (368) Admin; Engineer;
Meas. Tech;
Operator; Auditor
DATA_MAP_BUSY Reload Data Model Map EUNM16 0->1 0 Reloading R/W: 2.12.0.XXX Log Changes
Maps (369) Admin; Engineer;
R/O:
Meas. Tech;
Operator; Auditor
DB_INST_CHANGE_ Database Instance Change UINT16 0 R/O: 2.14.0.XXX
CNT Counter Admin; Engineer;
Meas. Tech;
Operator; Auditor
DNP3_MAP_BUSY Reload DNP3 Data Map ENUM16 0 -> 1 Reloading R/W: 02.15.0.XXX Log Changes
Maps (369) Admin; Engineer;
R/O:
Meas. Tech;
Operator; Auditor
DOWNLOAD_MASK I/O Download Mask BIN32 0 -> 4294967295 Selective R/W: 02.15.0.XXX Log Changes
429496 Download Admin; Engineer;
7295 Mask (406) R/O:
Meas. Tech;
Operator; Auditor
DOWNLOAD_ERR_B I/O Download Error Status BIN32 0 -> Selective 02.15.0.XXX
ITS 429496 Download
7295 Mask (406)
ENHANCED_MB_SL Enhanced Modbus Slave IDs ENUM16 0 -> 1 Enable/Disable R/W: 02.17.0.XXX Log Changes
AVE_ID Selection (30) Admin; Engineer;
R/O:
Object Parameter Listing 769
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
System
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech;
Operator; Auditor
770 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.72 System Pwr Parameters
Description: The System Pwr (Power) object provides the parameters for monitoring the health of the batteries and
configuring loop power.
Number of Instances: 1 instance may exist.
Storage Location: Saved to internal configuration memory.
Table 5-71: System Power Parameters
System Power
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 System Pwr R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 0→5 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech;
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 System Power R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 771
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
System Power
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
EXT_VOLT_VAL External Voltage FLOAT 0 V (16-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
EXT_VOLT_ALM External Voltage Alarm ObjectRef Alarm_32001 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
BATT_CHNG Indicate Battery has been ENUM16 0→3 No Change (0) Battery R/W: 2.0.0.XXX ▪ Log Changes
Changed Change (154) Admin; Engineer; ▪ Legal
0 - No Change Meas. Tech
1 - Battery Replaced R/O:
2 - SRAM Battery Replaced Operator; Auditor
3 - PS SRAM Battery
Replaced
OPER_TRIP_POINT Operating Trip Point ENUM16 0→2 DC Supply (2) Operational R/W: 2.0.0.XXX ▪ Log Changes
1 - Solar Supply Trip Point 3000 Admin; Engineer; ▪ Legal
2 - DC Supply (301) Meas. Tech ▪ Verified
R/O:
Operator; Auditor
SRAM_BATT_STATU SRAM Battery Status ENUM16 Battery Normal (0) SRAM Battery R/O: 2.0.0.XXX Legal
S 0 - Battery Normal Status (153) Admin; Engineer;
1 - Battery Failure or Meas. Tech;
Removal Operator; Auditor
SRAM_BATT_ SRAM Battery In Use UINT16 0 d (17-3) R/O: 2.0.0.XXX Legal
RUNTIME Admin; Engineer;
Meas. Tech;
Operator; Auditor
SRAM_BATT_CHNG_ SRAM Battery Change TIME Undefined R/O: 2.0.0.XXX Legal
TIME Date/Time Admin; Engineer;
Meas. Tech;
Operator; Auditor
SRAM_PS_BATT_ SRAM PS Battery Status ENUM16 Battery Normal (0) SRAM Battery R/O: 2.0.0.XXX Legal
STATUS 0 - Battery Normal Status (153) Admin; Engineer;
772 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
System Power
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
1 - Battery Failure or Meas. Tech;
Removal Operator; Auditor
SRAM_PS_BATT_ SRAM PS Battery In Use UINT16 0 d (17-3) R/O: 2.0.0.XXX Legal
RUNTIME Admin; Engineer;
Meas. Tech;
Operator; Auditor
SRAM_PS_BATT_ SRAM PS Battery Change TIME Undefined R/O: 2.0.0.XXX Legal
CHG_TM Date/Time Admin; Engineer;
Meas. Tech;
Operator; Auditor
EXT_CURRENT_VAL CPU Current Value FLOAT 0 mA (15-0) R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
Object Parameter Listing 773
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.73 Total Parameters
Description: The Total object provides the parameters for viewing periodic and cumulative totals and for configuring
cumulative rollover values.
Number of Instances: 1380 instances may exist (varies with number and type of configured meter runs).
Storage Location: Saved to internal configuration memory.
Table 5-72: Total Parameters
Total
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 0→5 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech;
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 Varies by instance R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
RAW_PARAM Input to Totalize ParamRef Varies by instance R/O: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
774 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Total
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech;
Operator; Auditor
CURRENT Current Accumulated Total DOUBLE 0 Varies by R/O: 2.0.0.XXX Legal
instance Admin; Engineer;
Meas. Tech;
Operator; Auditor
ROLLOVER Rollover Value DOUBLE 0 1.00E+12 Varies by R/W: 2.0.0.XXX ▪ Log Changes
instance Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
ROLLOVER_COUNT Non-resettable Rollover UINT32 0 R/O: 2.0.0.XXX Legal
Count Admin; Engineer;
Meas. Tech;
Operator; Auditor
SNAPSHOT Value of Input at Last Period DOUBLE 0 Varies by R/O: 2.0.0.XXX Legal
End instance Admin; Engineer;
Meas. Tech;
Operator; Auditor
SNAP_TIME Timestamp of Last Period Time R/O: 2.0.0.XXX Legal
End Admin; Engineer;
Meas. Tech
Operator; Auditor
CUR_PER Current Hour Total DOUBLE 0 Varies by R/O: 2.0.0.XXX Legal
instance Admin; Engineer;
Meas. Tech;
Operator; Auditor
PREV_PER Previous Hour Total DOUBLE 0 Varies by R/O: 2.0.0.XXX Legal
instance Admin; Engineer;
Meas. Tech;
Operator; Auditor
CUR_DAY Current Day Total DOUBLE 0 Varies by R/O: 2.0.0.XXX Legal
instance Admin; Engineer;
Meas. Tech;
Operator; Auditor
Object Parameter Listing 775
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Total
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
PREV_DAY Previous Day Total DOUBLE 0 Varies by R/O: 2.0.0.XXX Legal
instance Admin; Engineer;
Meas. Tech;
Operator; Auditor
CUR_WK Current Week Value DOUBLE 0 Varies by R/O: 2.0.0.XXX Legal
instance Admin; Engineer;
Meas. Tech;
Operator; Auditor
PREV_WK Previous Week Value DOUBLE 0 Varies by R/O: 2.0.0.XXX Legal
instance Admin; Engineer;
Meas. Tech;
Operator; Auditor
CUR_MNTH Current Month Total DOUBLE 0 Varies by R/O: 2.0.0.XXX Legal
instance Admin; Engineer;
Meas. Tech;
Operator; Auditor
PREV_MNTH Previous Month Total DOUBLE 0 Varies by R/O: 2.0.0.XXX Legal
instance Admin; Engineer;
Meas. Tech;
Operator; Auditor
CUR_BATCH Current Batch Total DOUBLE 0 Varies by R/O: 2.12.0.XXX Legal
instance Admin; Engineer;
Meas. Tech;
Operator; Auditor
PREV_BATCH Previous Batch Total DOUBLE 0 Varies by R/O: 2.12.0.XXX Legal
instance Admin; Engineer;
Meas. Tech;
Operator; Auditor
PREV_BATCH_STAR Value of Input at Previous DOUBLE 0 Varies by R/O: 2.12.0.XXX Legal
T Batch Start instance Admin; Engineer;
Meas. Tech;
Operator; Auditor
PREV_BATCH_END Value of Input at Previous DOUBLE 0 Varies by R/O: 2.12.0.XXX Legal
Batch End instance Admin; Engineer;
776 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Total
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech;
Operator; Auditor
CUR_BATCH_START Value of Input at Current DOUBLE 0 Varies by R/O: 2.12.0.XXX Legal
Batch Start instance Admin; Engineer;
Meas. Tech;
Operator; Auditor
CUR_DAY_START Value of Input at Current Day DOUBLE 0 Varies by R/O: 2.13.0.XXX Legal
Start instance Admin; Engineer;
Meas. Tech;
Operator; Auditor
PREV_DAY_START Value of Input at Previous DOUBLE 0 Varies by R/O: 2.13.0.XXX Legal
Day Start instance Admin; Engineer;
Meas. Tech;
Operator; Auditor
CUR_MNTH_START Value of Input at Current DOUBLE 0 Varies by R/O: 2.13.0.XXX Legal
Month Start instance Admin; Engineer;
Meas. Tech;
Operator; Auditor
PREV_MNTH_START Value of Input at Previous DOUBLE 0 Varies by R/O: 2.13.0.XXX Legal
Month Start instance Admin; Engineer;
Meas. Tech;
Operator; Auditor
CUR_PER_START Value of Input at Current DOUBLE 0 Varies by R/O: 2.13.0.XXX Legal
Hour Start instance Admin; Engineer;
Meas. Tech;
Operator; Auditor
PREV_PER_START Value of Input at Previous DOUBLE 0 Varies by R/O: 2.13.0.XXX Legal
Hour Start instance Admin; Engineer;
Meas. Tech;
Operator; Auditor
CUR_WK_START Value of Input at Current DOUBLE 0 Varies by R/O: 2.13.0.XXX Legal
Week Start instance Admin; Engineer;
Meas. Tech;
Operator; Auditor
Object Parameter Listing 777
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Total
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
PREV_WK_START Value of Input at Previous DOUBLE 0 Varies by R/O: 2.13.0.XXX Legal
Week Start instance Admin; Engineer;
Meas. Tech;
Operator; Auditor
778 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.74 TransHConfig Parameters
Description: The TransHConfig object provides the parameters for transactional history configuration
Number of Instances: 1 instance may exist.
Storage Location: Saved to internal configuration memory.
Table 5-73: TransHConfig Parameters
TransHConfig
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 User Acct R/W: 2.11.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 0→5 0 R/W: 2.11.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.11.0.XXX
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech;
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 Trans Hist Config R/W: 2.11.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
NUM_REQ_TRANS_ Num of Req Transaction UINT8 0->100 0 R/W: 2.11.0.XXX ▪ Log Changes
GRP Groups Admin; Engineer; ▪ Legal
Meas. Tech
Object Parameter Listing 779
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
TransHConfig
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
TRANS_GRP_MAX_ Max Num of Trans Pts in UINT16 0->650 650 R/O: 2.11.0.XXX ▪ Log Changes
NUM_PT Group Admin; Engineer; ▪ Legal
Meas. Tech;
Operator; Auditor
NUM_CUR_TRANS_ Num of Current Transaction UINT8 0->100 0 R/O: 2.11.0.XXX Log Changes
GRP Groups Admin; Engineer;
Meas. Tech;
Operator; Auditor
TRANS_GRP_CONF_ Transaction Group Config ENUM16 0->1 0 Trans Grp Conf R/O: 2.11.0.XXX Log Changes
STAT Status Stat (375) Admin; Engineer;
Meas. Tech;
Operator; Auditor
TRANS_STATUS Transaction History Status ENUM16 0->1 0 Trans Hist R/O: 2.11.0.XXX Log Changes
Status (380) Admin; Engineer;
Meas. Tech;
Operator; Auditor
780 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.75 TransHGrp Parameters
Description: The TransHGrp object provides the parameters for transactional history group
Number of Instances: 100 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-74: TransHGrp Parameters
TransHGrp
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 User Acct R/W: 2.11.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 0→5 0 R/W: 2.11.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.11.0.XXX Legal
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech;
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 Varies by instance R/W: 2.11.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
TRANS_CUR_NUM_ Current String Pts UINT8 0->25 0 R/O: 2.11.0.XXX Legal
STR_PT Admin; Engineer;
Object Parameter Listing 781
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
TransHGrp
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech;
Operator; Auditor
TRANS_CUR_NUM_ Current Numeric Pts UINT16 0->650 0 R/O: 2.11.0.XXX Legal
NRC_PT Admin; Engineer;
Meas. Tech;
Operator; Auditor
TRANS_CUR_NUM_ Current Trans Recs UINT16 200-> 200 R/O: 2.11.0.XXX Legal
RCD 65000 Admin; Engineer;
Meas. Tech;
Operator; Auditor
TRANS_REQ_NUM_ Requested String Pts UINT8 0->25 0 R/W: 2.11.0.XXX Legal
STR_PT Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
TRANS_REQ_NUM_ Requested Numeric Pts UINT16 0->650 0 R/W: 2.11.0.XXX Legal
NRC_PT Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
TRANS_REQ_NUM_ Requested Trans Recs UINT16 200-> 200 R/W: 2.11.0.XXX Legal
RCD 65000 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
TRANS_LOG_ENB Enable Trans Logging ENUM16 1 1 Enable/Disable R/W: 2.11.0.XXX Legal
Selection (30) Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
TRANS_LOG_ALM_E Enable Trans Alarm ENUM16 0 0 Enable/Disable R/W: 2.11.0.XXX Legal
NB Selection (30) Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
782 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
TransHGrp
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
TRANS_FULL_LIM Trans Log Full Rem Recs UINT16 1 R/W: 2.11.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
TRANS_NEAR_LIM Trans Log Near Full Rem Recs UINT16 1 R/W: 2.11.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
TRANS_LOG_ALM Log Alarm Status BIN32 0 R/O: 2.11.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
TRANS_LAST_READ Sequence Number Last Read UINT32 0 R/W: 2.11.0.XXX Legal
_SEQ Record Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
TRANS_NUM_LOST Num Of Lost Records UINT32 0 R/O: 2.11.0.XXX Legal
_RCD Admin; Engineer;
Meas. Tech;
Operator; Auditor
TRANS_START_HIST Transaction Start History OBJREF Varies by instance R/O: 2.11.0.XXX
_OBJ Object Admin; Engineer;
Meas. Tech;
Operator; Auditor
TRANS_CONF_CHN Transaction Config change UINT8 0 R/O: 2.11.0.XXX
G_CNTR counter Admin; Engineer;
Meas. Tech;
Operator; Auditor
TRANS_RECORD_S Transaction Record Subtype BIN8 0->7 0 Trans Trigger R/W: 2.11.0.XXX Legal
UBTYPE SubType (377) Admin; Engineer;
Meas. Tech
Object Parameter Listing 783
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
TransHGrp
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
TRANS_TRIG_STAT Transaction Trigger Status BIN16 0 Trans Trigger R/O: 2.11.0.XXX Legal
US Status (378) Admin; Engineer;
Meas. Tech;
Operator; Auditor
TRANS_TRIG_SIGN Transaction Trigger Signal ENUM16 0->3 0 Trans Trigger R/W: 2.11.0.XXX • Log Changes
AL Signal (379) Admin; Engineer; • Legal
Meas. Tech
R/O:
Operator; Auditor
TRANS_ID Transaction Id UC20 Varies by instance R/W: 2.11.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
TRANS_GROUP_US Group Use Type ENUM16 0->105 0 Trace Status R/W: 2.11.0.XXX Log Changes
E_TYPE (382) Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
TRANS_GROUP_US Group Use Instance UINT16 0->100 0 R/W: 2.11.0.XXX Legal
E_INST Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
TRANS_LOG_BUSY Transaction Busy ENUM16 0->1 0 Enable/Disable R/O: 2.12.0.XXX Legal
Selection (30) Admin; Engineer;
Meas. Tech;
Operator; Auditor
LATEST_SEQ_NUM Latest Sequence Number UINT32 0 R/O: 2.14.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
784 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
TransHGrp
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
AUTO_SNAPSHOT_ Auto Snapshot Period UINT32 0 -> Duration (17) R/W: 2.17.0.XXX Legal
PERIOD 720000 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 785
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.76 TransHist
Description: The TransHist object provides the parameters for transactional history
Number of Instances: 3100 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-75: TransHist Parameters
TransHist
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 User Acct R/W: 2.11.0.XXX • Log Changes
Admin; Engineer; • Legal
Meas. Tech
R/O:
Operator; Auditor
OBJ_AREA Area Assignment UINT8 0→5 0 R/W: 2.11.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.11.0.XXX Legal
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech;
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
DESC Description UC20 R/W: 2.11.0.XXX • Log Changes
Admin; Engineer; • Legal
Meas. Tech
R/O:
Operator; Auditor
TRANS_HIST_GRP_ OBJREF Undefined R/O: 2.11.0.XXX
OBJ Admin; Engineer;
786 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
TransHist
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech;
Operator; Auditor
TRANS_HIST_PARA PRMREF Undefined R/W: 2.11.0.XXX • Log Changes
M Admin; Engineer; • Legal
Meas. Tech
R/O:
Operator; Auditor
TRANS_HIST_TYPE ENUM16 0->6 2 History Type R/W: 2.12.0.XXX • Log Changes
(43) Admin; Engineer; • Legal
Meas. Tech
R/O:
Operator; Auditor
TRANS_HIST_DATA ENUM16 0->1 0 Trans Hist R/O: 2.11.0.XXX
_TYPE Data Format Admin; Engineer;
(374) Meas. Tech;
Operator; Auditor
Object Parameter Listing 787
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.77 User Acct Parameters
Description: The User Acct object provides the parameters for user accounts.
Number of Instances: 103 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-76: User Acct Parameters
UserAcct
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 User Acct N/A: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
OBJ_AREA Area Assignment UINT8 0→5 0 N/A: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status N/A: 2.0.0.XXX Legal
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech;
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
ID User Identifier UC30 Undefined N/A: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
PASSWORD Password ByteArray Undefined N/A: 2.0.0.XXX Legal
32 Admin; Engineer;
Meas. Tech;
Operator; Auditor
PIN PIN Code ByteArray Undefined N/A: 2.0.0.XXX Legal
32 Admin; Engineer;
788 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
UserAcct
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
Meas. Tech;
Operator; Auditor
LOCAL_PREF Localization Preferences ObjectRef Local Local_1 N/A: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
ROLE Role ObjectRef Role Role_1 N/A: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
PIN_ENB PIN Enable ENUM16 0→1 Disable (0) Enable/Disable N/A: 2.0.0.XXX Legal
0 - Disable Selection (30) Admin; Engineer;
1 - Enable Meas. Tech;
Operator; Auditor
SALT SALT ByteArray3 Undefined N/A: 2.0.0.XXX Legal
2 Admin; Engineer;
Meas. Tech;
Operator; Auditor
ACCT_TYPE Account Type ENUM16 0→1 Internal (1) Account Type N/A: 2.0.0.XXX Legal
0 - User (81) Admin; Engineer;
1 - Internal Meas. Tech;
Operator; Auditor
PROTOCOL Protocol ENUM16 0→4 None (0) Protocol (293) N/A: 2.0.0.XXX Legal
0 - None Admin; Engineer;
1 - DNP3 Meas. Tech;
2 - Modbus Operator; Auditor
Object Parameter Listing 789
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.78 User Data Parameters
Description: The User Data object provides the parameters for configuring the global data storage area.
Number of Instances: 50 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-77: User Data Parameters
UserData
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX Log Changes
“User Data_X” Admin; Engineer;
(where X is instance Meas. Tech
number between 1 R/O:
and 50) Operator; Auditor
OBJ_AREA Area Assignment UINT8 0 -> 5 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Undefined R/O: 2.0.0.XXX
Admin; Engineer;
Meas. Tech
Operator; Auditor
DESC Description UC40 Instance: R/W: 2.0.0.XXX Log Changes
“User Data_X” Admin; Engineer;
(where X is instance Meas. Tech
number between 1 R/O:
and 50) Operator; Auditor
FLOAT_1 Floating Point 1 FLOAT 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
790 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
UserData
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
FLOAT_2 Floating Point 2 FLOAT 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
FLOAT_3 Floating Point 3 FLOAT 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
FLOAT_4 Floating Point 4 FLOAT 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
FLOAT_5 Floating Point 5 FLOAT 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
FLOAT_6 Floating Point 6 FLOAT 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
FLOAT_7 Floating Point 7 FLOAT 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
FLOAT_8 Floating Point 8 FLOAT 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 791
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
UserData
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
FLOAT_9 Floating Point 9 FLOAT 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
FLOAT_10 Floating Point 10 FLOAT 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
FLOAT_11 Floating Point 11 FLOAT 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
FLOAT_12 Floating Point 12 FLOAT 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
FLOAT_13 Floating Point 13 FLOAT 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
FLOAT_14 Floating Point 14 FLOAT 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
FLOAT_15 Floating Point 15 FLOAT 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
792 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
UserData
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
FLOAT_16 Floating Point 16 FLOAT 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
FLOAT_17 Floating Point 17 FLOAT 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
FLOAT_18 Floating Point 18 FLOAT 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
FLOAT_19 Floating Point 19 FLOAT 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
FLOAT_20 Floating Point 20 FLOAT 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DOUBLE _1 Double Floating Point 1 DOUBLE 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DOUBLE_2 Double Floating Point 2 DOUBLE 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 793
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
UserData
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
DOUBLE_3 Double Floating Point 3 DOUBLE 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DOUBLE_4 Double Floating Point 4 DOUBLE 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DOUBLE_5 Double Floating Point 5 DOUBLE 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DOUBLE_6 Double Floating Point 6 DOUBLE 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DOUBLE_7 Double Floating Point 7 DOUBLE 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DOUBLE_8 Double Floating Point 8 DOUBLE 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
DOUBLE_9 Double Floating Point 9 DOUBLE 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
794 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
UserData
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
DOUBLE_10 Double Floating Point 10 DOUBLE 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
LONG_1 Long Integer 1 UINT32 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
LONG_2 Long Integer 2 UINT32 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
LONG_3 Long Integer 3 UINT32 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
LONG_4 Long Integer 4 UINT32 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
LONG_5 Long Integer 5 UINT32 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
LONG_6 Long Integer 6 UINT32 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 795
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
UserData
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
LONG_7 Long Integer 7 UINT32 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
LONG_8 Long Integer 8 UINT32 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
LONG_9 Long Integer 9 UINT32 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
LONG_10 Long Integer 10 UINT32 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SHORT_1 Short Integer 1 UINT16 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SHORT_2 Short Integer 2 UINT16 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SHORT_3 Short Integer 3 UINT16 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
796 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
UserData
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
SHORT_4 Short Integer 4 UINT16 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SHORT_5 Short Integer 5 UINT16 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SHORT_6 Short Integer 6 UINT16 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SHORT_7 Short Integer 7 UINT16 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SHORT_8 Short Integer 8 UINT16 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SHORT_9 Short Integer 9 UINT16 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
SHORT_10 Short Integer 10 UINT16 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
Object Parameter Listing 797
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
UserData
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
BYTE_1 Byte Integer 1 UINT8 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
BYTE_2 Byte Integer 2 UINT8 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
BYTE_3 Byte Integer 3 UINT8 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
BYTE_4 Byte Integer 4 UINT8 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
BYTE_5 Byte Integer 5 UINT8 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
BYTE_6 Byte Integer 6 UINT8 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
BYTE_7 Byte Integer 7 UINT8 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
798 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
UserData
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
BYTE_8 Byte Integer 8 UINT8 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
BYTE_9 Byte Integer 9 UINT8 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
BYTE_10 Byte Integer 10 UINT8 0 R/W: 2.0.0.XXX Log Changes
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
EVENT_LOG_OPT Event Logging ENUM16 0 -> 1 Disable (0) Enable/Disable R/W: 2.0.0.XXX Log Changes
Selection (30) Admin; Engineer;
0 - Disable Meas. Tech
1 - Enable R/O:
Operator; Auditor
Object Parameter Listing 799
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5.79 4088 Parameters
Description: The 4088 object provides the parameters for configuring 4088B multivariable transmitters.
Number of Instances: 20 instances may exist.
Storage Location: Saved to internal configuration memory.
Table 5-78: 4088 Parameters
4088
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
OBJ_NAME Tag UC20 Instance: R/W: 2.0.0.XXX ▪ Log Changes
“4088B_1-X” (where Admin; Engineer; ▪ Legal
X is instance Meas. Tech
number between 1 R/O:
and 20) Operator; Auditor
OBJ_AREA Area Assignment UINT8 0→5 0 R/W: 2.0.0.XXX ▪ Log Changes
Admin; Engineer; ▪ Legal
Meas. Tech
R/O:
Operator; Auditor
OBJ_STATUS Status BIN32 Normal Object Status R/O: 2.0.0.XXX Legal
0 - Normal (80) Admin; Engineer;
1 - In Alarm Meas. Tech;
2 - Failure Operator; Auditor
3 - Override
4 - Inactive
MOD_LOC Module Location UINT8 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
CHANNEL Channel UINT8 2 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
800 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
4088
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
DESC Description UC20 Instance: R/W: 2.0.0.XXX Legal
“4088B_1-X” (where Admin; Engineer;
X is instance Meas. Tech
number between 1 R/O:
and 20) Operator; Auditor
SENSOR_OBJ Transmitter Sensor ObjectRef Sensor Instance: R/O: 2.0.0.XXX Legal
“Sensor_1-X” Admin; Engineer;
(where X is instance Meas. Tech;
number between 1 Operator; Auditor
and 20)
4088_ADDR 4088B Modbus Address UINT8 1→240 Instance: R/W: 2.0.0.XXX ▪ Log Changes
1-1 Admin; Engineer; ▪ Legal
2-2 Meas. Tech
3-3 R/O:
4-4 Operator; Auditor
5-5
6-6
7-7
8-8
9-9
10-10
11-1
12-2
13-3
14-4
15-5
16-6
17-7
18-8
19-9
20-10
LCD_BMASK LCD Bit masks BIN32 None LCD Bit masks R/W: 2.0.0.XXX Legal
0 - None (196) Admin; Engineer;
1 - Differential Pressure Meas. Tech
2 - Absolute Pressure
Object Parameter Listing 801
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
4088
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
3 - Temperature R/O:
4 - Baud Rate Operator; Auditor
5 - Gage Pressure
6 - Sensor Temperature
7 - Reserved
8 - Slave Address
9 - Host Parameter 1
10 - Host Parameter 2
11 - Host Parameter 3
12 - Host Parameter 4
13 - Host Parameter 5
14 - Host Parameter 6
15 - Reserved
16 - Reserved
17 - Host Variable 1
18 - Host Variable 2
19 - Host Variable 3
LCD_SCROLL_TM LCD Scroll Time UINT8 1→10 3 s (17-0) R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
4088_TAG 4088B Tag UC10 ?????????? R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
4088_DESC 4088B Description UC20 ?????????????????? R/W: 2.0.0.XXX Legal
?? Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
4088_MSG 4088B Message UC40 ?????????????????? R/W: 2.0.0.XXX Legal
?? Admin; Engineer;
Meas. Tech
802 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
4088
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
USR_DEF_TXT1 User Defined Text 1 UC10 ?????????? R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
USR_DEF_VAL1 User Defined Value 1 ParamRef Undefined R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
USR_DEF_UNIT1 User Defined Unit 1 UC10 ?????? R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
USR_DEF_TXT2 User Defined Text 2 UC10 ?????????? R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
USR_DEF_VAL2 User Defined Value 2 ParamRef Undefined R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
USR_DEF_UNIT2 User Defined Unit 2 UC10 ?????? R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
USR_DEF_TXT3 User Defined Text 3 UC10 ?????????? R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
Object Parameter Listing 803
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
4088
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
USR_DEF_VAL3 User Defined Value 3 ParamRef Undefined R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
USR_DEF_UNIT3 User Defined Unit 3 UC10 ?????? R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
USR_DEF_LABEL1 User Defined Label 1 UC10 ?????????? R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
USR_DEF_PRM1 User Defined Parameter 1 FLOAT 0 R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
USR_DEF_PUNT1 User Defined Unit of UC10 ?????????? R/W: 2.0.0.XXX Legal
Parameter 1 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
USR_DEF_LABEL2 User Defined Label 2 UC10 ?????????? R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
USR_DEF_PRM2 User Defined Parameter 2 FLOAT 0 R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
804 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
4088
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
USR_DEF_PUNT2 User Defined Unit of UC10 ?????????? R/W: 2.0.0.XXX Legal
Parameter 2 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
USR_DEF_LABEL3 User Defined Label 3 UC10 ?????????? R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
USR_DEF_PRM3 User Defined Parameter 3 FLOAT 0 R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
USR_DEF_PUNT3 User Defined Unit of UC10 ?????????? R/W: 2.0.0.XXX Legal
Parameter 3 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
USR_DEF_LABEL4 User Defined Label 4 UC10 ?????????? R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
USR_DEF_PRM4 User Defined Parameter 4 FLOAT 0 R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
USR_DEF_PUNT4 User Defined Unit of UC10 ?????????? R/W: 2.0.0.XXX Legal
Parameter 4 Admin; Engineer;
Meas. Tech
Object Parameter Listing 805
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
4088
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
R/O:
Operator; Auditor
USR_DEF_LABEL5 User Defined Label 5 UC10 ?????????? R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
USR_DEF_PRM5 User Defined Parameter 5 FLOAT 0 R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
USR_DEF_PUNT5 User Defined Unit of UC10 ?????????? R/W: 2.0.0.XXX Legal
Parameter 5 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
USR_DEF_LABEL6 User Defined Label 6 UC10 ?????????? R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
USR_DEF_PRM6 User Defined Parameter 6 FLOAT 0 R/W: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
USR_DEF_PUNT6 User Defined Unit of UC10 ?????????? R/W: 2.0.0.XXX Legal
Parameter 6 Admin; Engineer;
Meas. Tech
R/O:
Operator; Auditor
STAT_OPTN Transmitter Status Option BIN8 None Transmitter R/O: 2.0.0.XXX Legal
0 - None Status Option Admin; Engineer;
1 - DP Sensor Present (197)
806 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
4088
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
2 - AP Sensor Present Meas. Tech;
3 - GP Sensor Present Operator; Auditor
4 - PT Sensor Present
5 - LCD Available
MODBUS_REV Transmitter Modbus Version UINT8 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
FIRM_VER Firmware Version UINT8 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
SCAN_ENABLE Transmitter Scanning enable ENUM16 0→1 Disable (0) Enable/Disable R/W: 2.0.0.XXX ▪ Log Changes
0 - Disable Selection (30) Admin; Engineer; ▪ Legal
1 - Enable Meas. Tech
R/O:
Operator; Auditor
ON_DEMAND_CMD User commands ENUM16 0→5 No Command (0) User R/W: 2.0.0.XXX Legal
0 - No Command Commands Admin; Engineer;
1 - On Demand Connect (198) Meas. Tech
2 - On Demand Synchronize R/O:
3 - Transmitter Reset Operator; Auditor
4 - On Demand Write
5 - On Demand Read
DP_VAR_STATUS DP Variable Status ENUM16 Good - Not Limited Variable Status R/O: 2.0.0.XXX ▪ Legal
0 - Good - Not Limited (0) (202) Admin; Engineer; ▪ Verified
1 - Poor Accuracy-Low Meas. Tech;
Limited Operator; Auditor
2 - Poor Accuracy-High
Limited
3 - Poor Accuracy-No Limited
4 - Manual/Fixed - Constant
5 - Bad -Constant
6 - Unknown
Object Parameter Listing 807
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
4088
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
SP_VAR_STATUS SP Variable Status ENUM16 Good - Not Limited Variable Status R/O: 2.0.0.XXX ▪ Legal
0 - Good - Not Limited (0) (202) Admin; Engineer; ▪ Verified
1 - Poor Accuracy-Low Meas. Tech;
Limited Operator; Auditor
2 - Poor Accuracy-High
Limited
3 - Poor Accuracy-No Limited
4 - Manual/Fixed - Constant
5 - Bad -Constant
6 - Unknown
PT_VAR_STATUS PT Variable Status ENUM16 Good - Not Limited Variable Status R/O: 2.0.0.XXX ▪ Legal
0 - Good - Not Limited (0) (202) Admin; Engineer; ▪ Verified
1 - Poor Accuracy-Low Meas. Tech;
Limited Operator; Auditor
2 - Poor Accuracy-High
Limited
3 - Poor Accuracy-No Limited
4 - Manual/Fixed - Constant
5 - Bad -Constant
6 - Unknown
ST_VAR_STATUS ST Variable Status ENUM16 Good - Not Limited Variable Status R/O: 2.0.0.XXX ▪ Legal
0 - Good - Not Limited (0) (202) Admin; Engineer; ▪ Verified
1 - Poor Accuracy-Low Meas. Tech;
Limited Operator; Auditor
2 - Poor Accuracy-High
Limited
3 - Poor Accuracy-No Limited
4 - Manual/Fixed - Constant
5 - Bad -Constant
6 - Unknown
4088_CAL_STAT Calibration status of 4088B BIN8 No Measurement In Calibration R/O: 2.0.0.XXX Legal
0 - No Measurement In Calibration status of 4088 Admin; Engineer;
Calibration (199) Meas. Tech;
1 - DP Measurement In Operator; Auditor
Calibration
808 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
4088
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
2 - SP Measurement In
Calibration
3 - PT Measurement In
Calibration
COMM_STATUS Modbus Communication ENUM16 Disabled (2) Status (200) R/O: 2.0.0.XXX ▪ Legal
Health Admin; Engineer; ▪ Verified
0 - Success Meas. Tech;
1 - Failure Operator; Auditor
2 - Disabled
CONFIG_CHANGE_ Configuration Change UINT16 0 R/O: 2.0.0.XXX ▪ Legal
CNT Counter Admin; Engineer; ▪ Verified
Meas. Tech;
Operator; Auditor
INPUT_STATUS Input Health Status BIN32 Normal 4088 Input R/O: 2.0.0.XXX Legal
0 - Normal Status (201) Admin; Engineer;
1 - Not Licensed Meas. Tech;
2 - Instance Inactive Operator; Auditor
3 - Communication Failed
4 - Config. Issue Due To
Write Protect
5 - DP Failed
6 - Pressure Failed
7 - RTD Failed
8 - Synchronization In
Progress
9 - Scan Disabled
10 - Writing Failed
11 - Scanning Baud Rate
12 - EMV in Mode A
13 - Reading Device
14 - Writing Device
15 - Baud Too Low
16 - Writing Baud Failed
17 - Sensor Disconnected
Object Parameter Listing 809
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
4088
Default
Description of functionality Data Measurement
Name and meaning of values Type Range Default Type (Table #) Access (by Role) Version Other Attributes
XMTR_SER_NUM Transmitter Serial Number UINT32 0 R/O: 2.0.0.XXX Legal
Admin; Engineer;
Meas. Tech;
Operator; Auditor
810 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
4088 Config parameters, 819 HART parameters, 486, 496
4088 parameters, 808 HARTSlave parameters, 498
Action Blk parameters, 281 Hist Grp parameters, 515
AI parameters, 293 Hist parameters, 500
AICal parameters, 300 HistConfig parameters, 502
Alarm parameters, 307 IOConfig parameters, 522, 524
AO parameters, 314 Linear Meter parameters, 529, 532
AppInfo parameters, 321 Liq Dens parameters, 551
Average parameters, 325 Liq FlProp parameters, 553
Bus parameters, 330 Liq LinMtr parameters, 560
Clock parameters, 333 Liq Prod parameters, 584
Comm parameters, 339 Local parameters, 587
Components parameters, 347 Log parameters, 589
Ctrl Setup parameters, 363, 384 MapTable parameters, 593
DI parameters, 366 MasterConf parameters, 610
DNP3 parameters, 371, 373, 378, 708, 709 Math Blk parameters, 615
DO parameters, 386 Module parameters, 620
DP Meter parameters, 393 Mtr Setup parameters, 627
DP parameters, 412 Parameters
Effect parameters, 417 4088, 808
FBxNConfig parameters, 420 4088 Config, 819
FBxNData parameters, 423 Action Blk, 281
AI, 293
FBxNDevice parameters, 425
AICal, 300
FLTCal parameters, 428
Alarm, 307
Fluid Prop parameters, 435
AO, 314
GC Config parameters, 448 AppInfo, 321
GC Data parameters, 457 Average, 325
GC Stream parameters, 477 Bus, 330
Object Parameter Listing 811
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Clock, 333 MasterConf, 610
Comm, 339 Math Blk, 615
Components, 347 Module, 620
Ctrl Setup, 363, 384 Mtr Setup, 627
DI, 366 PI, 630
DNP3, 371, 373, 378, 708, 709 PID, 636
DO, 386 PollTable, 644
DP, 412 PowerCtrl, 688
DP Meter, 393 Press, 693
Effect, 417 RackConfig, 699, 700, 702
FBxNConfig, 420 Redundancy, 704
FBxNData, 423 Role, 711
FBxNDevice, 425 RTD, 718
FLTCal, 428 Security, 726
Fluid Prop, 435 Sensor, 728
GC Config, 448 SlaveConf, 736
GC Data, 457 Station, 746
GC Stream, 477 System, 766, 768
HART, 486, 496 System Power, 779
HARTSlave, 498 Total, 782
Hist, 500 TransHConfig, 787
Hist Grp, 515 TransHGrp, 789
HistConfig, 502 TransHist, 794
IOConfig, 522, 524 User Acct, 796
Linear Meter, 529, 532 User Data, 798
Liq Dens, 551 PI parameters, 630
Liq FlProp, 553 PID parameters, 636
Liq LinMtr, 560 PollTable parameters, 644
Liq Prod, 584
PowerCtrl parameters, 688
Local, 587
Press parameters, 693
Log, 589
RackConfig parameters, 699, 700, 702
MapTable, 593
812 Object Parameter Listing
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
Redundancy parameters, 704 5–22. FBxNData Parameters, 423
Role parameters, 711 5–23. FBxNDevice Parameters, 425
RTD parameters, 718 5–24. FLTCal Parameters, 428
5–25. Fluid Prop Parameters, 435
Security parameters, 726
5–26. GC Config Parameters, 448
Sensor parameters, 728
5–27. GC Data Parameters, 457
SlaveConf parameters, 736
5–28. GC Stream Parameters, 477
Station parameters, 746 5–29. HART Parameters, 486
System parameters, 766, 768 5–30. HART Parameters, 496
System Power parameters, 779 5–31. HARTSlave Parameters, 498
Tables 5–32. Hist Parameters, 500
5-1. Measurement Types, 224 5–33. HistConfig Parameters, 502
5–2. Action Blk Parameters, 281 5–34. Hist Grp Parameters, 515
5–3. AI Parameters, 293 5–35. IoConfig Parameters, 522
5–4. AICal Parameters, 300 5–36. IoConfig Parameters, 524
5–5. Alarm Parameters, 307 5–37. Linear Meter Parameters, 529, 532
5–6. AO Parameters, 314 5–38. Liq Dens Parameters, 551
5–7. AppInfo Parameters, 321 5–39. Liq FlProp Parameters, 553
5–8. Average Parameters, 325 5–40. Liq LinMtr Parameters, 560
5–9. Bus Parameters, 330 5–41. Liq Prod Parameters, 584
5–10. Clock Parameters, 333 5–42. Local Parameters, 587
5–11. Comm Parameters, 339 5–43. Log Parameters, 589
5–12. Components Parameters, 347 5–44. MapTable Parameters, 593
5–13. Ctrl Setup Parameters, 363, 384 5–45. MasterConf Parameters, 610
5–14. DI Parameters, 366 5–46. Math Blk Parameters, 615
5–15. DNP3 Parameters, 371, 373, 378, 708, 709 5–47. Module Parameters, 620
5–16. Ctrl Setup Parameters, 384 5–48. Mtr Setup Parameters, 627
5–17. DO Parameters, 386 5–49. PI Parameters, 630
5–18. DP Meter Parameters, 393 5–50. PID Parameters, 636
5–19. DP Parameters, 412 5–51. PollTable Parameters, 644
5–20. Effect Parameters, 417 5–52. PowerCtrl Parameters, 688
5–21. FBxNConfig Parameters, 420 5–53. Press Parameters, 693
Object Parameter Listing 813
DNP3 Protocol Specifications Manual (FB3000)
D301858X012
September 2024
5–54. RackConfig Parameters, 699, 700, 702 5–67. TransHist Parameters, 794
5–55. Redundancy Parameters, 704 5–68. User Acct Parameters, 796
5–56. Role Parameters, 711 5–69 User Data Parameters, 798
5–57. RTD Parameters, 718 5–70. 4088 Parameters, 808
5–58. Security Parameters, 726 5–71. 4088 Config Parameters, 819
5–59. Sensor Parameters, 728 Total parameters, 782
5–60. SlaveConf Parameters, 736 TransHConfig parameters, 787
5–61. Station Parameters, 746 TransHGrp parameters, 789
5–62. System Parameters, 766, 768
TransHist parameters, 794
5–63. System Power Parameters, 779
User Acct parameters, 796
5–64. Total Parameters, 782
User Data parameters, 798
5–65. TransHConfig Parameters, 787
5–66. TransHGrp Parameters, 789
814 Object Parameter Listing
DNP3 Protocol Specifications Manual (for FB3000)
D31858X012
September 2024
For customer service and technical support,
visit Emerson.com/Guardian.
North America and Latin America:
Emerson Automation Solutions
Energy and Transportation Solutions
6005 Rogerdale Road
Houston, TX 77072 U.S.A.
T +1 281 879 2699 | F +1 281 988 4445
Emerson.com/SCADAforEnergy
United Kingdom:
Emerson Process Management Limited
Fosse House, 6 Smith Way
Grove Park, Enderby
Leicester LE19 1SX UK
T +44 0 870 240 1978
Europe:
Emerson S.R.L
Regulatory Compliance Shared Services
Department
Company No. J12/88/2006
Emerson 4 Street
Parcul Industrial Tetarom 11
Romania
T +40 374 132 000
Middle East/Africa:
Emerson Automation Solutions
Energy and Transportation Solutions © 2019-2024 Bristol Inc. All rights reserved.
Emerson FZE
This publication is for informational purposes only. While every effort has been
P.O. Box 17033
made to ensure accuracy, this publication shall not be read to include any
Jebel Ali Free Zone – South 2
warranty or guarantee, express or implied, including as regards the products or
Dubai U.A.E.
services described or their use or applicability. Bristol Inc. (hereinafter “Energy
T +971 4 8118100 | F +971 4 8865465
and Transportation Solutions” or ETS) reserves the right to modify or improve the
Asia-Pacific: designs or specifications of its products at any time without notice. All sales are
Emerson Automation Solutions governed by ETS terms and conditions which are available upon request. ETS
Energy and Transportation Solutions accepts no responsibility for proper selection, use or maintenance of any product,
1 Pandan Crescent which remains solely with the purchaser and/or end-user. Emerson and the
Singapore 128461 Emerson logo are trademarks and service marks of Emerson Electric Co. All other
T +65 6777 8211| F +65 6777 0947 marks are the property of their respective owners.
Energy and Transportation Solutions
You might also like
- Tutorial Lorawan With Murata Lora ModuleNo ratings yetTutorial Lorawan With Murata Lora Module14 pages
- Installation, Wiring, Operation Manua: One and Two Pen Circular Chart RecorderNo ratings yetInstallation, Wiring, Operation Manua: One and Two Pen Circular Chart Recorder32 pages
- Schneider - Wiring of RS485 Communications Networks - 16798 PDFNo ratings yetSchneider - Wiring of RS485 Communications Networks - 16798 PDF10 pages
- Study On Modbus/DNP3 Protocol: Topics CoveredNo ratings yetStudy On Modbus/DNP3 Protocol: Topics Covered26 pages
- Module and Phase Classes Parameter Reference Paths and AliasesNo ratings yetModule and Phase Classes Parameter Reference Paths and Aliases3 pages
- Optimass Service Handbook With MFC400 Rev5No ratings yetOptimass Service Handbook With MFC400 Rev552 pages
- PLC Proworx32 Software User Manual v1.0No ratings yetPLC Proworx32 Software User Manual v1.0326 pages
- PUB00123R0 Common Industrial Protocol and Family of CIP Netw100% (1)PUB00123R0 Common Industrial Protocol and Family of CIP Netw92 pages
- Plantpax Distributed Control System - Templates: User ManualNo ratings yetPlantpax Distributed Control System - Templates: User Manual146 pages
- AVEVA Customer FIRST Program User Guide v1.3 May 2020No ratings yetAVEVA Customer FIRST Program User Guide v1.3 May 202041 pages
- PowerFlex 4 Class Multi-Drive Control On EtherNetIP PDFNo ratings yetPowerFlex 4 Class Multi-Drive Control On EtherNetIP PDF8 pages
- Masoneilan: 12300 Series Digital Level Transmitter / Controller0% (1)Masoneilan: 12300 Series Digital Level Transmitter / Controller7 pages
- DeltaV Workstation and Server Hardware Product Data Sheet (PDS)No ratings yetDeltaV Workstation and Server Hardware Product Data Sheet (PDS)18 pages
- PMT Hps Experion LCN Overview and Implementation Guide Epdoc x478 en 530cNo ratings yetPMT Hps Experion LCN Overview and Implementation Guide Epdoc x478 en 530c505 pages
- Product Data Sheet Deltav Smart Switches en 57676No ratings yetProduct Data Sheet Deltav Smart Switches en 5767631 pages
- Well Test Manager For Roc800 Series Brochure en 132382No ratings yetWell Test Manager For Roc800 Series Brochure en 1323824 pages
- WWTP Sequence Programming - Proof of Concept - Draft OnlyNo ratings yetWWTP Sequence Programming - Proof of Concept - Draft Only10 pages
- FD-BF-001 Foxboro FieldDevices 010715 LowRes PDFNo ratings yetFD-BF-001 Foxboro FieldDevices 010715 LowRes PDF24 pages
- Experion Series 8 IO C300 Controller SpecsheetNo ratings yetExperion Series 8 IO C300 Controller Specsheet41 pages
- 1769-1769-L32C, 1769-L35CR CompactLogixNo ratings yet1769-1769-L32C, 1769-L35CR CompactLogix48 pages
- 5009XT Digital Fault Tolerant Control For Steam Turbines (Single Valve, Extraction And/or Admission)No ratings yet5009XT Digital Fault Tolerant Control For Steam Turbines (Single Valve, Extraction And/or Admission)77 pages
- Emerson DeltaV 2017 White Paper Predict & PredictProNo ratings yetEmerson DeltaV 2017 White Paper Predict & PredictPro6 pages
- Product Data Sheet Deltav MX Controller en 57726No ratings yetProduct Data Sheet Deltav MX Controller en 577265 pages
- Asbir Automatic Filter Systems BrochureNo ratings yetAsbir Automatic Filter Systems Brochure42 pages
- Dnp3 Protocol Specifications Manual (For Emerson Fb3000 Rtus)No ratings yetDnp3 Protocol Specifications Manual (For Emerson Fb3000 Rtus)797 pages
- 1MRK511348-UUS - en Communication Protocol Manual DNP 670 Series 2.1No ratings yet1MRK511348-UUS - en Communication Protocol Manual DNP 670 Series 2.168 pages
- Emerson fb3000 Rtu LCD Touchpad User Manual en 11008956No ratings yetEmerson fb3000 Rtu LCD Touchpad User Manual en 1100895644 pages
- fb3000 Rtu 16 Channel Digital Input Pulse Input Module Field Installation Guide 3dih16 3dis16 Dit16 en 11008954No ratings yetfb3000 Rtu 16 Channel Digital Input Pulse Input Module Field Installation Guide 3dih16 3dis16 Dit16 en 1100895416 pages
- D301686X012 - ControlWave Flow Measurement Applications Guide-70-84No ratings yetD301686X012 - ControlWave Flow Measurement Applications Guide-70-8415 pages
- Compal (LCFC) NM-A982 CG413-CG513 DIS REV 1.0 - Lenovo IdeaPad 310-15IKB Yoga 510-15IKB PDFNo ratings yetCompal (LCFC) NM-A982 CG413-CG513 DIS REV 1.0 - Lenovo IdeaPad 310-15IKB Yoga 510-15IKB PDF60 pages
- Dokumentips User Manual Canoe Vector 231010 135521No ratings yetDokumentips User Manual Canoe Vector 231010 135521189 pages
- Data Structures and Algorithms: Lecture Notes ForNo ratings yetData Structures and Algorithms: Lecture Notes For126 pages
- How To Troubleshoot The - NTLDR Is Missing - Error Message in Windows Server 2003No ratings yetHow To Troubleshoot The - NTLDR Is Missing - Error Message in Windows Server 20034 pages
- CAT TC 900 Users Manual With RF Exposure NoticeNo ratings yetCAT TC 900 Users Manual With RF Exposure Notice33 pages
- Introduction To Docker: Ajeet Singh Raina Docker Captain - Docker, IncNo ratings yetIntroduction To Docker: Ajeet Singh Raina Docker Captain - Docker, Inc56 pages
- Perl Version 5.8.8 Documentation - Perlintro: Strongly PerltocNo ratings yetPerl Version 5.8.8 Documentation - Perlintro: Strongly Perltoc10 pages
- HP Special Edition l2000 Compaq Presario v2000No ratings yetHP Special Edition l2000 Compaq Presario v2000176 pages
