UCP 215 - Ball bearing units | SKF https://www.skf.com/group/products/mounted-bearings/ball-bearing-unit...

Image may differ from product. See technical specification for details.

UCP 215
Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, Japanese
standards

Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron
housing that can be bolted to a support surface. This variant is strong and stiff, and is

1 จาก 10 18/1/2568 11:57

UCP 215 - Ball bearing units | SKF https://www.skf.com/group/products/mounted-bearings/ball-bearing-unit...

suitable for applications with both constant and alternating directions of rotation. It has an
inner ring extended on both sides and is locked onto the shaft by tightening a set screw on
the inner ring, making it easy to mount.

• Strong
• Designed for a constant and alternating rotation
• Ready to mount
• Lubricated and sealed bearing
• Quick locking onto the shaft
• Cost-effective

2 จาก 10 18/1/2568 11:57

UCP 215 - Ball bearing units | SKF https://www.skf.com/group/products/mounted-bearings/ball-bearing-unit...

O ve r v i e w

Dimensions
Attachment bolt diameter 20 mm

Shaft diameter 75 mm

Centre height (pillow block) 82.6 mm

Housing overall width 73 mm

Centre distance between bolt holes 217 mm

Bearing width, total 77.8 mm

Performance
Basic dynamic load rating 66.3 kN

Basic static load rating 49 kN

Limiting speed 2 100 r/min

Note Limiting speed with shaft tolerance h6

Properties
Housing type Pillow block

Number of bolt holes for fasteners 2

Fastening bolt hole type Plain

Retaining feature, inner ring Set screws

Bore type Cylindrical

Rubber seating ring Without

Material, housing Cast iron

Material, bearing Bearing steel

Coating Without

Sealing, bearing Seal and flinger on both sides

Sealing type Contact, standard

Sealing, unit Without

Lubricant Grease

Relubrication hole With

Grease fitting With

Logistics
Product net weight 7.46 kg

3 จาก 10 18/1/2568 11:57

UCP 215 - Ball bearing units | SKF https://www.skf.com/group/products/mounted-bearings/ball-bearing-unit...

eClass code 23-05-16-02

UNSPSC code 31171536

4 จาก 10 18/1/2568 11:57

UCP 215 - Ball bearing units | SKF https://www.skf.com/group/products/mounted-bearings/ball-bearing-unit...

Technical specification

Compliance with standard JIS

Purpose specific For material handling applications

Material, housing Cast iron

Sealing, bearing Seal and flinger on both sides

Sealing type, bearing Contact, standard

Sealing, unit Without

Coating Without

5 จาก 10 18/1/2568 11:57

UCP 215 - Ball bearing units | SKF https://www.skf.com/group/products/mounted-bearings/ball-bearing-unit...

Dimensions

d 75 mm Bore diameter

d1 ≈ 91.5 mm Shoulder diameter of inner ring

A 73 mm Base width

A1 42 mm Top width

B 77.8 mm Width of inner ring

Distance from locking device side face to

B4 11 mm
thread centre

H 82.6 mm Height of spherical seat centre

H1 25.5 mm Foot height

H2 164 mm Overall height

J 217 mm Distance between attachment bolts

J max. 222 mm Distance between attachment bolts

J min. 212 mm Distance between attachment bolts

L 271.5 mm Overall length

N 25 mm Diameter of attachment bolt hole

N1 30 mm Length of attachment bolt hole

Distance from locking device side face to

s1 44.5 mm
raceway centre

THREADED HOLE

RG 1/8-27 NPT Housing thread for the grease fitting

R1 5 mm Axial position of the housing thread

6 จาก 10 18/1/2568 11:57

UCP 215 - Ball bearing units | SKF https://www.skf.com/group/products/mounted-bearings/ball-bearing-unit...

Rα 45 ° Angular position of the housing thread

GREASE FITTING

DN 6.589 mm Diameter of head sphere of grease fitting

SWN 11.11 mm Hexagonal key size for the grease fitting

GN 1/8-27 NPT Thread of grease fitting

Calculation data

Basic dynamic load rating C 66.3 kN

Basic static load rating C0 49 kN

Fatigue load limit Pu 2.04 kN

Limiting speed 2 100 r/min

Limiting speed with shaft tolerance h6

Mounting information

Set screw G2 M12x1.5

Hexagonal key size for set screw 6.08 mm

Recommended tightening torque for set

28.5 N·m
screw

Recommended diameter for attachment

G 20 mm
bolts, mm

Recommended diameter for attachment

G 0.75 in
bolts, inch

Tolerances and clearances

The values depend on the included bearing:

• Bore diameter tolerance → table 1
• Radial internal clearance → table 2
• Recommended fit → table 3
• Shaft tolerance → table 4

7 จาก 10 18/1/2568 11:57

UCP 215 - Ball bearing units | SKF https://www.skf.com/group/products/mounted-bearings/ball-bearing-unit...

8 จาก 10 18/1/2568 11:57

UCP 215 - Ball bearing units | SKF https://www.skf.com/group/products/mounted-bearings/ball-bearing-unit...

M o re I n fo r m at i o n

d Product details b Engineering { Tools

information
Pillow block units to ISO standards SKF Product select
e Principles of ball bearing units
Pillow block units to North American selection and application - Download Bearing Frequency Calculator
standards catalogue (4.9 MB)

Pillow block units to Japanese Principles of selecting mounted bearing

Industrial Standards (JIS) solutions

Pillow block units, not standardized Bearing failure and how to prevent it
(incl. SKF Food Line)

Permissible misalignment

Locating/non-locating support

Loads

Temperature limits

Permissible speed

Lubrication

Mounting and dismounting

Ordering information

Designation system

9 จาก 10 18/1/2568 11:57

UCP 215 - Ball bearing units | SKF https://www.skf.com/group/products/mounted-bearings/ball-bearing-unit...

Terms of use
By accessing and using this website / app owned and published by AB SKF (publ.) (556007-3495 · Gothenburg) (“SKF”), you
agree to the following terms and conditions:
Wa r r a n t y D i s c l a i m e r a n d L i m i t a t i o n o f L i a b i l i t y
Although every care has been taken to assure the accuracy of the information on this website / app, SKF provides this
information "AS IS" and DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. You acknowledge that your use of this
website / app is at your sole risk, that you assume full responsibility for all costs associated with use of this website / app, and
that SKF shall not be liable for any direct, incidental, consequential, or indirect damages of any kind arising out of your access to,
or use of the information or software made available on this website / app.

Any warranties and representations in this website / app for SKF products or services that you purchase or use will be subject to
the agreed upon terms and conditions in the contract for such product or service.

Further, for non-SKF websites / apps that are referenced in our website / app or where a hyperlink appears, SKF makes no
warranties concerning the accuracy or reliability of the information in these websites / apps and assumes no responsibility for
material created or published by third parties contained therein. In addition, SKF does not warrant that this website / app or
these other linked websites / apps are free from viruses or other harmful elements.
T h i r d Pa r t y S e r v i c e s
When viewing YouTube content via the SKF website(s) (i.e. using YouTube API Services), you agree to be bound by the YouTube
Terms of Service.
C o py r i g h t
Copyright in this website / app copyright of the information and software made available on this website / app rest with SKF or
its licensors. All rights are reserved. All licensed material will reference the licensor that has granted SKF the right to use the
material. The information and software made available on this website / app may not be reproduced, duplicated, copied,
transferred, distributed, stored, modified, downloaded or otherwise exploited for any commercial use without the prior written
approval of SKF. However, it may be reproduced, stored and downloaded for use by individuals without prior written approval of
SKF. Under no circumstances may this information or software be supplied to third parties.
This website /app includes certain images used under license from Shutterstock, Inc.
Trademarks and Patent s
All trademarks, brand names, and corporate logos displayed on the website / app are the property of SKF or its licensors, and
may not be used in any way without prior written approval by SKF. All licensed trademarks published on this website / app
reference the licensor that has granted SKF the right to use the trademark. Access to this website / app does not grant to the
user any license under any patents owned by or licensed to SKF.
C h a n ge s
SKF reserves the right to make changes or additions to this website / app at any time.

10 จาก 10 18/1/2568 11:57