11/11/2018 Horno de regeneración de carbono
RECUPERACIÓN DE ORO APLASTANTE CLASIFICACIÓN MOLIENDA
FLOTACIÓN LIXIVIACIÓN LABORATORIO
EXPLOTACIÓN DE PLACERES PLANTAS DE PROCESAMIENTO DE ROCA DURA
BOMBEO DESHIDRATACIÓN FUNDICIÓN PULVERIZANDO
Equipos de laboratorio de procesamiento de minerales: de los MEJORES FABRICANTES
Equipos de minería de oro, plata, cobre, zinc, plomo ... todos los metales
Contáctenos
INICIAR SESIÓN CARRO 0
Necesito ayuda
Horno de
regeneración
de carbono
Nuestros hornos
rotatorios
personalizados se
basan principalmente
en el proceso.
Diseñados para
garantizar un tiempo de
residencia correcto a
una temperatura de
mantenimiento de 20
minutos, no de 10
minutos, aseguran una
alimentación progresiva
estable de su carbón
https://www.911metallurgist.com/equipment/carbon-regeneration-kiln/ 1/9
11/11/2018 Horno de regeneración de carbono
con un sistema de
calefacción de tres
zonas con able con
controles
independientes, diseños
robustos de
levantadores térmicos,
movimiento de
corriente continua de
productos de reacción y
conducción térmica
correcta El área y el
grosor de la cama
de nen el tamaño de la
retorta.
Necesito ayuda
En la adsorción de oro,
la actividad del carbono
es su factor más
importante.
Garantizado 90% +
actividad de
regeneración para
carbono fresco.
Los hornos rotativos
también están
disponibles para otros
procesos, incluidos el
secado previo y el
tostado de uranio, el
tratamiento con cenizas
volantes, los procesos
de reactivación y más.
https://www.911metallurgist.com/equipment/carbon-regeneration-kiln/ 2/9
11/11/2018 Horno de regeneración de carbono
PAQUETE DE CLAVE Y
AUTOMATIZACIÓN
DISPONIBLE A PEDIDO
Categoría: CIL / CIP & Elution
+ Electrowinning
Descripción
Descripción
Especi caciones técnicas del horno de regeneración de carbono
Necesito ayuda
Tarifas de alimentación disponibles 50—1400 kg / h
Contenido de humedad 50—1400 kg / h
No requerido (vapor genera
Requisito de vapor
adsorbida)
Alimentador de tornillo SS
Mecanismo de alimentación
deshidratación de wedgew
Pre-secado No requerido. El vapor es g
Inyección de vapor No es necesario, excepto pa
AISI 321 SS retort
Tolerancias 0.05%
Soportado en extr
Tubo de retorta
EN8
Levantadores inte
retorta.
Robusta carcasa d
Caja cerámica.
Acabado en plata
Sistema de calefacción Tres (3) zonas con
Independent three
Duplex (control an
Hearth mounted l
https://www.911metallurgist.com/equipment/carbon-regeneration-kiln/ 3/9
11/11/2018 Horno de regeneración de carbono
Fuel Fired: Tangential
Packaged FBR LPG/NG
Electric: Dual side han
Rescal PRM ‘rapid cha
Two independent drive syst
VSD Bon glioli Ge
Drive System 24V DC Battery Ba
rotary encoder mo
Multi-system alar
MODULAR ACTIVATED CARBON REGENERATION
KILN
Necesito ayuda
https://www.911metallurgist.com/equipment/carbon-regeneration-kiln/ 4/9
11/11/2018 Horno de regeneración de carbono
Necesito ayuda
https://www.911metallurgist.com/equipment/carbon-regeneration-kiln/ 5/9
11/11/2018 Horno de regeneración de carbono
Necesito ayuda
It’s true to say that few engineering design consultancies are reinventing the wheel when it
comes to process design and few remain experts in their eld.
By going with an equipment supplier instead, you’re providing your mine with a modular or
kit turn-key system saves you time and money! .
You’re also selecting a partner with tried and tested experience. One that can design,
manufacture, factory test (FAT), ship to site and assemble and nally commission your
system.
One experienced solution provider with knowledge to optimise your gold desorption
system through their experiences across.
Modular or kit form Gold Desorption Units (GDU’s) are available with a selection of
packaged turn key components comprising systems including:
Elution (Carbon Stripping),
Carbon Regeneration for carbon reactivation,
https://www.911metallurgist.com/equipment/carbon-regeneration-kiln/ 6/9
11/11/2018 Horno de regeneración de carbono
Gold Re ning Plants (Goldrooms),
Fresh Carbon Conditioning fro nes removal,
Carbon Fines Recovery for lowering tails losses,
Water Reclamation (Transfer Water) for water ef ciency and,
Gold Sludge Handling and Recovery
All systems can be containerised and shipped anywhere in the world due to proprietary
design technology.
Modular Elution Plants are available with the following circuit designs:
Atmospheric Zadra Circuit (AZ)
Pressure Zadra Circuit (PZ)
AARL or Split AARL Circuit
Veronika low form (Proprietary)
ELUTION MODULE
Necesito ayuda
The elution plants are available in either manual valved operation or full PLC operation and
include:
Acid wash column with injection manifold and acid dosing pump
Thermally lagged elution column
Direct or indirect fuel red or electric eluate heating circuits
Skid mounted thermally lagged reagent tank(s)
Relay or PLC based control system (standard Allen Bradley)
Electrowinning cells located in secured room
Switch mode high power factor recti ers
Interconnecting Piping and Instrumentation
Available in strip capacities from: 1 tonne – 10 tonnes of carbon
REGENERATION module AND CARBON CONDITIONING
The regeneration plants are available in either manual valve or full PLC operation and
include:
Horizontal fuel red or electric regeneration kiln
https://www.911metallurgist.com/equipment/carbon-regeneration-kiln/ 7/9
11/11/2018 Horno de regeneración de carbono
Pressurised or eductor based carbon quench tank
Elevated or oor mounted regeneration kiln structure
Carbon feed hopper
Barren carbon dewatering screen
Dry or wet carbon sizing screen
Local relay based control system or PLC control with touchscreen
Interconnecting Piping and Instrumentation
Available in sizes from: 50 kg/hr to 1 tonne/hr
Goldroom module
The goldrooms are structurally fabricated secure rooms for housing all the required
equipment for gold barring and include:
Pendant controlled eld red gold barring furnaces complete with extraction system
Necesito ayuda
Calcine or Drying Ovens with extraction system
Gold Dore Safe
Work and scales benches
Tooling (needle guns, polishing/buf ng equipment/drill presses etc.)
Optional security monitoring system pre- tted
Fresh Carbon Conditioning
Comprises an agitated conical bottom vessel with transfer eductor, fresh carbon feed chute
and electric monorail for supply of the carbon to your elution system. Gentle agitation
reduces the carbon nes introduced into your CIL/CIP system
CARBON FINES RECOVERY System
Used in conjunction with the Transfer Water System, this system recovers carbon nes with
high gold bearing loads from the transfer water assisting to reduce the high (up to 50g/t
loss) carbon losses experienced in the CIL plant.
WATER RECLAMATION
This system recovers hydraulic transfer used for carbon movement around the circuit.
Hydraulic transfer rather than impeller pumps reduces attrition of the carbon extending
https://www.911metallurgist.com/equipment/carbon-regeneration-kiln/ 8/9
11/11/2018 Horno de regeneración de carbono
your carbon life and lowering solids to tails. The transfer water recovery system
incorporates a large transfer water vessel with a transfer water pump system providing
water for carbon transfer around the plant.
Gold SLUDGE HANDLING AND RECOVERY
This sludge recovery equipment aides in the recovery of gold sludges when stainless steel
mesh cathode wire is used in the electrowinning cells rather than the traditional mild steel
wool where gold is plated to the wool. Sludges and gold nes are collected and dried to a
cake suitable for post thermal drying prior to being smelted in the barring furnace.
71 Linkedin Facebook Twitter Google Vk Print
SHARES
Necesito ayuda
Imágenes con fines ilustrativos únicamente. No se pueden entregar derechos de las ilustraciones.
911METALLURGY CORP. No puede ser responsable por errores de tipografía o fotografía.
Copyright 2012-2018 911Metalurgista | Todos los derechos reservados
Sobre nosotros | Privacidad
Contáctenos
| Políticas |
Vendemos equipos mineros para todos los metales.
https://www.911metallurgist.com/equipment/carbon-regeneration-kiln/ 9/9
