® SLABS &

WALL PANELS
 AERAFORM® SLABS & PANELS
Aeraform floor/roof slabs and wall panels are monolithic steel reinforced

Autoclaved Aerated Concrete elements. Slabs can be used as an

alternative to the in situ concrete slabs on RCC/steel framed structures,

preventing wastage of raw material. These slabs can be used as

floor/roof simply supported slabs on load-bearing walls, wood, concrete

or steel beams.

Wall panels are reinforced units, for non-load

bearing applications as either external or internal

walls in a wide variety of low, medium and high

rise buildings. They can also be used as cladding

for steel or concrete framed structures. They may

have single mesh or double mesh reinforcements

depending on the client’s requirements.

AAC slabs / panels are created with modern

technology devised to tackle the issues like higher

costs and more time consumption during

construction. These precast slabs come in the

form of ready to use Roof / Floor slabs.

Make A Smarter Choice Today!
Panels can be used as horizontal and vertical wall panels which minimize the usage

of different materials and saves construction time making it the fastest, most cost

effective material for construction.

These Floor / Roof slabs and wall panels do not require any kind of shuttering and

curing. Thus, dry construction and saving water and makes it a green construction.

Aeraform® slabs / panels are processed according to the

predefined sizes by actual site measurement given by

clients. It is convenient to install in a simple process, greatly

shortening the construction period and near "zero" wastage.

Provides a comfortable and pleasant environment inside

the building, with lower heating and cooling costs

throughout the life span of a building.

Properties
The best you can get.

Lightweight
Lightweight property of Aeraform® results in reducing the foundation loads which leads to big

savings in the overall construction cost especially at areas having poor soil bearing capacity.

Durability
Aeraform® products do not contain any organic matter subject to deterioration. It does not

degrade even under severe weather conditions. It can also be reused being modular in

nature and has a good salvage value.

Non-toxic
Aeraform® itself is ecologically harmless and VOC free, since it neither contains gases nor

fibers, it is neither dangerous to ground-water nor does it release any radiation or fumes.

Acoustic Insulation
Aeraform® meets the appropriate standards for sound insulation in house building, which

means quieter and more comfortable interior.

Earthquake Resistant
The low mass of Aeraform® results to reduced total dead load of the building and

consequently reducing the applied seismic forces to its structure.

Pest Resistant
Aeraform® provides airtight interior, does not contain any organic ingredient and termite

free that makes your home uninviting to pest, insects or rodents.

Colour, Texture
Aeraform® is greyish white with even surface.
Advantages

Fast construction process, Reduced structural cost due to Light weight, easy to install.
improving efficiency and quality. lighter weight. High strength to weight ratio.

No shuttering and curing Low density compared to concrete, Expansion of construction is easier with

needed, saving water. good thermal and sound insulation. the lowest addition in the overall budget.

Being uniform floor area, reduces the quantity for bedding

Regains its shape even after permissible material for tiles. Thereby reducing the dead weight on slab &
deflection limits. reduces cost of bedding material.
Applications

Industries & Factories Residential Bungalows Warehouse, Cold Storages Office Buildings

Hotels And Restaurants Theatres, Auditoriums Educational Institutions Hospitals

Tongue & Groove For Locking Slabs

Technical Specifications Aeraform® Slabs

Length Width Thickness

Upto 4m 600mm 100-230mm

Drying shrinkage 0.09% Compressive strength 3.5 N/mm2

Thermal conductivity 0.21K cal/m/h/⁰C Dry density 640 kg/m3

200kg/m2 (live load) and can be designed for higher loads depending upon
Design load
span and its use.
Technical Specifications Aeraform® Wall Panels

Compressive strength Dry density Drying shrinkage Thermal conductivity

3.5 N/mm2 640 kg/m3 0.09% 0.21K cal/m/h/⁰C

Thickness 3" 4" 5" 6" 8"

Max. Length 3m 4m 4m 4.8m 4.8m

BIS Specification
For Aeraform® Slabs and Panels

BIS 6072 BIS 6073 BIS 6441

Specification for autoclaved Specification for autoclaved Methods of test for autoclaved
reinforced cellular concrete
reinforced cellular concrete wall cellular concrete products.
floor and roof slabs.
slabs. Part 1,2,3,4,5,6 & 8

JVS Comatsco Industries Pvt. Ltd.

39/D, Swastik House, Gultekdi,

Jawaharlal Nehru Road, Pune - 411037
Maharashtra, India. Poojary Prefab Pvt. Ltd.
Tel: +91 20 2245 6500 Gat No 1424 Wagholi,
Lohegaon Road, Pune 412207
Fax: +91 20 3045 6517 / 2645 4524 Tel: +91 9764770700
Email: [email protected] Email: [email protected]
Website: www.poojary.net
Website: www.aeraform.com