Safety Data Sheet

SECTION 1 IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE

COMPANY/UNDERTAKING

1.1 Product identifier

Rando HD 68
Product Number(s): 801659

1.2 Relevant identified uses of the substance or mixture and uses advised against
Identified Uses: Hydraulic Oil
Uses advised against: Consult supplier when used other than those specified.

1.3 Details of the supplier of the safety data sheet

Chevron Belgium BV
Zuiderpoort Office Park
Gaston Crommenlaan 4
9050 Gent
Belgium
email : [email protected]

1.4 Emergency telephone number

Transportation Emergency Response
CHEMTREC: +1 703 527 3887
Health Emergency
Centre Antipoisons: +32022649636
Chevron Emergency Information Center: International calls accepted 24 hours: +1 510 231 0623
Product Information
Product Information: 0032/(0)9 293 71 11

SECTION 2 HAZARDS IDENTIFICATION

2.1 Classification of the substance or mixture

CLP CLASSIFICATION:
Not classified as dangerous according to EU regulatory guidelines.

2.2 Label elements

Under the criteria of Regulation (EC) No 1272/2008 (CLP):
Not classified

2.3 Other hazards

This product is not, or does not contain, a substance that is a potential PBT or a vPvB. This product is
not, or does not contain, a substance that potentially has endocrine disrupting properties.

SECTION 3 COMPOSITION/ INFORMATION ON INGREDIENTS

____________________________________________________________________
Revision Number: 8 1 of 9 Rando HD 68
Revision Date: July 31, 2024 SDS : 21736
3.2 Mixtures
This material is a mixture.

COMPONENTS CAS EC REGISTRATION CLP AMOUNT

NUMBER NUMBER NUMBER CLASSIFICATION
Distillates, hydrotreated 64742-54-7 265-157-1 01-2119484627-25 None 70 - 99
heavy paraffinic %weight
In accordance with the Regulation (EC)No 1272/2008, Nota L, reference IP 346/92: "DMSO Extraction
Method", we have determined that the base oils used in this preparation are not carcinogenic.

SECTION 4 FIRST AID MEASURES

4.1 Description of first aid measures

Eye: No specific first aid measures are required. As a precaution, remove contact lenses, if worn, and
flush eyes with water.
Skin: No specific first aid measures are required. As a precaution, remove clothing and shoes if
contaminated. To remove the material from skin, use soap and water. Discard contaminated clothing
and shoes or thoroughly clean before reuse.
Ingestion: No specific first aid measures are required. Do not induce vomiting. As a precaution, get
medical advice.
Inhalation: No specific first aid measures are required. If exposed to excessive levels of material in the
air, move the exposed person to fresh air. Get medical attention if coughing or respiratory discomfort
occurs.

4.2 Most important symptoms and effects, both acute and delayed
IMMEDIATE SYMPTOMS AND HEALTH EFFECTS
Eye: Not expected to cause prolonged or significant eye irritation.
Skin: High-Pressure Equipment Information: Accidental high-velocity injection under the skin of materials
of this type may result in serious injury. Seek medical attention at once should an accident like this occur.
The initial wound at the injection site may not appear to be serious at first; but, if left untreated, could
result in disfigurement or amputation of the affected part.
Contact with the skin is not expected to be harmful.
Ingestion: Not expected to be harmful if swallowed.
Inhalation: Not expected to be harmful if inhaled. Contains a petroleum-based mineral oil. May cause
respiratory irritation or other pulmonary effects following prolonged or repeated inhalation of oil mist at
airborne levels above the recommended mineral oil mist exposure limit. Symptoms of respiratory irritation
may include coughing and difficulty breathing.

DELAYED OR OTHER SYMPTOMS AND HEALTH EFFECTS: Not classified.

4.3 Indication of any immediate medical attention and special treatment needed
Not applicable.

SECTION 5 FIRE FIGHTING MEASURES

5.1 Extinguishing media

Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames.

5.2 Special hazards arising from the substance or mixture

Combustion Products: Highly dependent on combustion conditions. A complex mixture of airborne
solids, liquids, and gases including carbon monoxide, carbon dioxide, and unidentified organic
compounds will be evolved when this material undergoes combustion.

5.3 Advice for firefighters

This material will burn although it is not easily ignited. See Section 7 for proper handling and storage.

____________________________________________________________________
Revision Number: 8 2 of 9 Rando HD 68
Revision Date: July 31, 2024 SDS : 21736
For fires involving this material, do not enter any enclosed or confined fire space without proper protective
equipment, including self-contained breathing apparatus.

SECTION 6 ACCIDENTAL RELEASE MEASURES

6.1 Personal precautions, protective equipment and emergency procedures

Observe all relevant local and international regulations. Eliminate all sources of ignition in vicinity of
spilled material. Keep out unnecessary and unprotected personnel. Persons entering the contaminated
area to correct the problem or to determine whether it is safe to resume normal activities must comply
with all instructions in the Exposure Controls/PersonalProtection section. Refer to Sections 5 and 8 for
more information.

6.2 Environmental precautions

Stop the source of the release if you can do it without risk. Contain release to prevent further
contamination of soil, surface water or groundwater.

6.3 Methods and material for containment and cleaning up

Clean up spill as soon as possible, observing precautions in Exposure Controls/Personal Protection. Use
appropriate techniques such as applying non-combustible absorbent materials or pumping. Where
feasible and appropriate, remove contaminated soil and dispose of in a manner consistent with applicable
requirements. Place other contaminated materials in disposable containers and dispose of in a manner
consistent with applicable requirements. Report spills to local authorities as appropriate or required.

6.4 Reference to other sections

See sections 8 and 13.

SECTION 7 HANDLING AND STORAGE

7.1 Precautions for safe handling

General Handling Information: Avoid contaminating soil or releasing this material into sewage and
drainage systems and bodies of water.
Precautionary Measures: Do not get in eyes, on skin, or on clothing. Do not taste or swallow. Wash
thoroughly after handling.
Static Hazard: Electrostatic charge may accumulate and create a hazardous condition when handling
this material. To minimize this hazard, bonding and grounding may be necessary but may not, by
themselves, be sufficient. Review all operations which have the potential of generating and accumulating
an electrostatic charge and/or a flammable atmosphere (including tank and container filling, splash filling,
tank cleaning, sampling, gauging, switch loading, filtering, mixing, agitation, and vacuum truck operations)
and use appropriate mitigating procedures.
Container Warnings: Container is not designed to contain pressure. Do not use pressure to empty
container or it may rupture with explosive force. Empty containers retain product residue (solid, liquid,
and/or vapor) and can be dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose
such containers to heat, flame, sparks, static electricity, or other sources of ignition. They may explode
and cause injury or death. Empty containers should be completely drained, properly closed, and promptly
returned to a drum reconditioner or disposed of properly.

7.2 Conditions for safe storage, including any incompatibilities

Not Applicable

7.3 Specific end use(s):Hydraulic Oil

SECTION 8 EXPOSURE CONTROLS/PERSONAL PROTECTION

GENERAL CONSIDERATIONS:
Consider the potential hazards of this material (see Section 2), applicable exposure limits, job activities,

____________________________________________________________________
Revision Number: 8 3 of 9 Rando HD 68
Revision Date: July 31, 2024 SDS : 21736
and other substances in the workplace when designing engineering controls and selecting personal
protective equipment (PPE). If engineering controls or work practices are not adequate to prevent
exposure to harmful levels of this material, refer to PPE information below.

Factors that affect PPE include, but are not limited to: properties of the chemical, other chemicals which
may contact the same PPE, physical requirements (fit & sizing, cut/puncture protection, dexterity, thermal
protection, etc.), and potential allergic reactions to the PPE material. It is the responsibility of the user to
read and understand all instructions and limitations supplied with the equipment since protection is
usually provided for a limited time or under certain circumstances. Refer to appropriate CEN standards.

8.1 Control parameters

Occupational Exposure Limits:
Component Country/ Form TWA STEL Ceiling Notation
Agency
Distillates, hydrotreated heavy Belgium Mist 5 mg/m3 10 mg/m3 -- --
paraffinic
Consult local authorities for appropriate values.

8.2 Exposure controls

ENGINEERING CONTROLS:
Use in a well-ventilated area.

PERSONAL PROTECTIVE EQUIPMENT

Eye/Face Protection: Wear protective equipment to prevent eye contact. Selection of protective
equipment may include safety glasses, chemical goggles, face shields, or a combination depending on
the work operations conducted.
Skin Protection: Wear chemical personal protective equipment (PPE) to prevent skin contact. Selection
of chemical protective clothing should be performed by an Occupational Hygienist or Safety Professional
and be based upon applicable standards (ASTM F739 or EN 374). Using chemical PPE depends upon
operations conducted and may include chemical gloves, boots, chemical apron, chemical suit, and
complete facial protection. Refer to PPE manufacturers to obtain breakthrough time information to
determine how long PPE can be used before it needs to be replaced. Unless specific glove
manufacturer data indicates otherwise, the below table is based upon available industry data to assist in
the glove selection process and is intended to be used as reference only.

Chemical Glove Material Thickness Typical Breakthrough Time

(mm) (minutes)
Butyl 0.7 120
Nitrile 0.8 240
Viton Butyl 0.3 240

Respiratory Protection: No respiratory protection is normally required. If user operations generate an

oil mist, determine if airborne concentrations are below the occupational exposure limit for mineral oil
mist. If not, wear an approved respirator that provides adequate protection from the measured
concentrations of this material. For air-purifying respirators use a particulate cartridge.

ENVIRONMENTAL EXPOSURE CONTROLS:

See relevant Community environmental protection legislation or the Annex, as applicable.

SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES

Attention: the data below are typical values and do not constitute a specification.

9.1 Information on basic physical and chemical properties

Appearance

____________________________________________________________________
Revision Number: 8 4 of 9 Rando HD 68
Revision Date: July 31, 2024 SDS : 21736
 Color: Colorless to amber
Physical State: Liquid
Odor: Hydrocarbon odor
Odor Threshold: No data available
pH: Not Applicable
Melting Point: No data available
Freezing Point: No data available
Initial Boiling Point: No data available
Flashpoint: (Cleveland Open Cup) 218 °C (424 °F) (Minimum)
Evaporation Rate: No data available
Flammability (solid, gas): No Data Available
Flammability (Explosive) Limits (% by volume in air):
Lower: Not Applicable Upper: Not Applicable
Vapor Pressure: No data available
Relative Vapor Density: No data available
Density: 0.87 kg/l @ 15°C (59°F) (Typical)
Solubility: Soluble in hydrocarbon solvents; insoluble in water.
Partition coefficient n-octanol/water (logarithmic value): No data available
Auto-ignition temperature: No data available
Decomposition temperature: No data available
Kinematic Viscosity: 61.2 mm2/s @ 40°C (104°F) (Minimum)
Explosive Properties: No Data Available
Oxidising properties: No Data Available

9.2 Other Information: No Data Available

SECTION 10 STABILITY AND REACTIVITY

10.1 Reactivity: May react with strong acids or strong oxidizing agents, such as chlorates, nitrates,
peroxides, etc.
10.2 Chemical Stability: This material is considered stable under normal ambient and anticipated
storage and handling conditions of temperature and pressure.
10.3 Possibility of hazardous reactions: Hazardous polymerization will not occur.
10.4 Conditions to Avoid: Not applicable
10.5 Incompatible materials to avoid: Not applicable
10.6 Hazardous decomposition products: None known (None expected)

SECTION 11 TOXICOLOGICAL INFORMATION

11.1 Information on hazard classes as defined in Regulation (EC) No 1272/2008

Product Information:
Serious Eye Damage/Irritation: The material is not considered an eye irritant. The product has not been
tested. The statement is based on evaluation of data for similar materials or product components.
Skin Corrosion/Irritation: The material is not considered a skin irritant. The product has not been tested.
The statement is based on evaluation of data for similar materials or product components.
Skin Sensitization: The material is not considered a skin sensitizer. The product has not been tested.
The statement is based on evaluation of data for similar materials or product components.
Acute Dermal Toxicity: The material is not considered a dermal toxicant. The product has not been
tested. The statement is based on evaluation of data for similar materials or product components.

Acute Toxicity Estimate (dermal): Not Applicable

Acute Oral Toxicity: The material is not considered an oral toxicant. The product has not been tested.
The statement is based on evaluation of data for similar materials or product components.

____________________________________________________________________
Revision Number: 8 5 of 9 Rando HD 68
Revision Date: July 31, 2024 SDS : 21736
Acute Toxicity Estimate (oral): Not Applicable
Acute Inhalation Toxicity: The material is not considered an inhalation toxicant. The product has not
been tested. The statement is based on evaluation of data for similar materials or product components.

Acute Toxicity Estimate (inhalation): Not Applicable

Germ Cell Mutagenicity: The material is not considered a mutagen. The product has not been tested.
The statement is based on evaluation of data for similar materials or product components.

Carcinogenicity: The material is not considered a carcinogen. The product has not been tested. The
statement is based on evaluation of data for similar materials or product components.

Reproductive Toxicity: The material is not considered a reproductive toxicant. The product has not been
tested. The statement is based on evaluation of data for similar materials or product components.

Specific Target Organ Toxicity - Single Exposure: The material is not considered a target organ
toxicant (single exposure). The product has not been tested. The statement is based on evaluation of
data for similar materials or product components.

Specific Target Organ Toxicity - Repeated Exposure: The material is not considered a target organ
toxicant (repeated exposure). The product has not been tested. The statement is based on evaluation of
data for similar materials or product components.

Aspiration Hazard: The material is not considered an aspiration hazard.

Component Information:
Serious Eye Damage/Irritation:
Distillates, hydrotreated heavy paraffinic Based on available data, the classification criteria are not met

Skin Corrosion/Irritation:
Distillates, hydrotreated heavy paraffinic Based on available data, the classification criteria are not met

Skin Sensitization:
Distillates, hydrotreated heavy paraffinic Based on available data, the classification criteria are not met

Acute Dermal Toxicity:

Distillates, hydrotreated heavy paraffinic Based on available data, the classification criteria are not met

Acute Oral Toxicity:

Distillates, hydrotreated heavy paraffinic Based on available data, the classification criteria are not met

Acute Inhalation Toxicity:

Distillates, hydrotreated heavy paraffinic Based on available data, the classification criteria are not met

Germ Cell Mutagenicity:

Distillates, hydrotreated heavy paraffinic Based on available data, the classification criteria are not met

Carcinogenicity:
Distillates, hydrotreated heavy paraffinic Based on available data, the classification criteria are not met

Reproductive Toxicity:
Distillates, hydrotreated heavy paraffinic Based on available data, the classification criteria are not met
____________________________________________________________________
Revision Number: 8 6 of 9 Rando HD 68
Revision Date: July 31, 2024 SDS : 21736
Specific Target Organ Toxicity - Single Exposure:
Distillates, hydrotreated heavy paraffinic Based on available data, the classification criteria are not met

Specific Target Organ Toxicity - Repeated Exposure:

Distillates, hydrotreated heavy paraffinic Based on available data, the classification criteria are not met

11.2 Information on other hazards

No other hazards identified.

SECTION 12 ECOLOGICAL INFORMATION

Product Information:
12.1 Toxicity
This material is not expected to be harmful to aquatic organisms. The product has not been tested. The
statement has been derived from the properties of the individual components.

12.2 Persistence and degradability

This material is not expected to be readily biodegradable. The product has not been tested. The
statement has been derived from the properties of the individual components.

12.3 Bioaccumulative potential

Bioconcentration Factor: No Data Available
Partition coefficient n-octanol/water (logarithmic value): No data available

12.4 Mobility in soil

No data available.

12.5 Results of PBT and vPvB assessment

This product is not, or does not contain, a substance that is a potential PBT or a vPvB.

12.6 Endocrine Disrupting Properties

This mixture does not contain any substances that are assessed as having endocrine disrupting
properties.

12.7 Other adverse effects

No other adverse effects identified.

Component Information:
Acute Toxicity:
Distillates, hydrotreated heavy paraffinic Based on available data, the classification criteria are not met

Long-term Toxicity:
Distillates, hydrotreated heavy paraffinic Based on available data, the classification criteria are not met

Biodegradation:
Distillates, hydrotreated heavy paraffinic Based on available data, the classification criteria are not met

Bioaccumulative Potential:
Distillates, hydrotreated heavy paraffinic Based on available data, the classification criteria are not met

SECTION 13 DISPOSAL CONSIDERATIONS

13.1 Waste treatment methods

____________________________________________________________________
Revision Number: 8 7 of 9 Rando HD 68
Revision Date: July 31, 2024 SDS : 21736
Use material for its intended purpose or recycle if possible. Oil collection services are available for used
oil recycling or disposal. Place contaminated materials in containers and dispose of in a manner
consistent with applicable regulations. Contact your sales representative or local environmental or health
authorities for approved disposal or recycling methods.
In accordance with European Waste Catalogue (E.W.C.) the codification is the following:13 01 10

SECTION 14 TRANSPORT INFORMATION

The description shown may not apply to all shipping situations. Consult appropriate Dangerous Goods
Regulations for additional description requirements (e.g., technical name) and mode-specific or quantity-
specific shipping requirements.

ADR/RID

NOT REGULATED AS DANGEROUS GOODS FOR TRANSPORT

14.1 UN Number or ID Number: Not applicable
14.2 UN proper shipping name: Not applicable
14.3 Transport hazard class(es): Not applicable
14.4 Packing group: Not applicable
14.5 Environmental hazards: Not applicable
14.6 Special precautions for user: Not applicable

ICAO / IATA

NOT REGULATED AS DANGEROUS GOODS FOR TRANSPORT

14.1 UN Number or ID Number: Not applicable
14.2 UN proper shipping name: Not applicable
14.3 Transport hazard class(es): Not applicable
14.4 Packing group: Not applicable
14.5 Environmental hazards: Not applicable
14.6 Special precautions for user: Not applicable

IMO / IMDG

NOT REGULATED AS DANGEROUS GOODS FOR TRANSPORT

14.1 UN Number or ID Number: Not applicable
14.2 UN proper shipping name: Not applicable
14.3 Transport hazard class(es): Not applicable
14.4 Packing group: Not applicable
14.5 Environmental hazards: Not applicable
14.6 Special precautions for user: Not applicable
14.7 Maritime Transport in Bulk according to IMO Instruments: Not applicable

SECTION 15 REGULATORY INFORMATION

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
REGULATORY LISTS SEARCHED:
01=EU Directive 76/769/EEC: Restrictions on the marketing and use of certain dangerous substances.
02=EU Directive 90/394/EEC: Carcinogens at work.
03=EU Directive 92/85/EEC: Pregnant or breastfeeding workers.
04=EU Directive 2012/18/EU: Seveso III.
05=EU Directive 98/24/EC: Chemical agents at work.
06=EU Directive 2004/37/EC: On the protection of workers.
07=EU Regulation EC No. 689/2008: Annex 1, Part 1.
08=EU Regulation EC No. 689/2008: Annex 1, Part 2.
09=EU Regulation EC No. 689/2008: Annex 1, Part 3.
10=EU Regulation EC No. 850/2004: Prohibiting and restricting persistent organic pollutants (POPs).
____________________________________________________________________
Revision Number: 8 8 of 9 Rando HD 68
Revision Date: July 31, 2024 SDS : 21736
11=EU REACH, Annex XVII: Restrictions on manufacture, placing on the market and use of certain dangerous
substances, mixture & article.
12=EU REACH, Annex XIV: Authorization List or Candidate List of Substances of Very High Concern for
Authorization (SVHC).

No components of this material were found on the regulatory lists above.

CHEMICAL INVENTORIES:
All components comply with the following chemical inventory requirements: AIIC (Australia), DSL
(Canada), ENCS (Japan), NZIoC (New Zealand), PICCS (Philippines), TCSI (Taiwan), TSCA (United
States).

15.2 Chemical safety assessment

No chemical safety assessment.

SECTION 16 OTHER INFORMATION

REVISION STATEMENT: SECTION 01 - Company Identification information was modified.

SECTION 01 - Product Use information was added.
SECTION 06 - Personal Precautions, Protective Equipment and Emergency Procedures information was
modified.
SECTION 08 - Skin Protection information was modified.
SECTION 09 - Physical/Chemical Properties information was modified.
SECTION 11 - Toxicological Information information was modified.
SECTION 12 - Ecological Information information was added.
SECTION 12 - Ecological Information information was deleted.
SECTION 15 - Regulatory Information information was deleted.
SECTION 15 - Regulatory Information information was modified.

Revision Date: July 31, 2024

Full text of CLP H-statements:

None

ABBREVIATIONS THAT MAY HAVE BEEN USED IN THIS DOCUMENT:

TLV - Threshold Limit Value TWA - Time Weighted Average
STEL - Short-term Exposure Limit PEL - Permissible Exposure Limit
CVX - Chevron CAS - Chemical Abstract Service Number
NQ - Not Quantifiable

Prepared according to the EU Regulation 1907/2006 (as amended) by Chevron.

The information in this SDS is based on the knowledge, information, and belief of Chevron and its
affiliates as of the publication date. It is not a quality specification, and no warranty, express or implied, is
given. We assume no responsibility or liability for the results of using this material. The information
presented here pertains only to the listed product. Since conditions of use are beyond our control, it is
the user's responsibility to determine the conditions for safe use of this product and assess its suitability
for their application. Users should seek additional guidance if necessary.

No Annex

____________________________________________________________________
Revision Number: 8 9 of 9 Rando HD 68
Revision Date: July 31, 2024 SDS : 21736