MBR1035 - MBR1060 — Schottky Rectifiers

October 2013

MBR1035 - MBR1060
Schottky Rectifiers
Features Description
• Low Power Loss, High Efficiency This Schottky rectifier is optimal for secondary rectifica-
• High Surge Capacity tion and free-wheeling applications for high-efficiency
DC-DC convertor design, which features very low for-
• Metal Silicon Junction, Majority Carrier Conduction
ward voltage drop and low leakage current.
• High Current Capacity, Low Forward-Voltage Drop
• Guard Ring for Over-Voltage Protection (OVP)

Applications
PIIN1
• Low-Voltage
• High-Frequency Inverters PIIN2 Case

• Free Wheeling
• Polarity Protection 1 2

TO-220AC

Ordering Information
Part Number Marking Package Packing Method
MBR1035 MBR1035
MBR1045 MBR1045
TO-220 2L Rail
MBR1050 MBR1050
MBR1060 MBR1060

Absolute Maximum Ratings

Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be opera-
ble above the recommended operating conditions and stressing the parts to these levels is not recommended. In addi-
tion, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.
Value
Symbol Parameter Units
MBR1035 MBR1045 MBR1050 MBR1060
VRRM Maximum Repetitive Reverse Voltage 35 45 50 60 V
IF(AV) Average Rectified Forward Current 10 A
Non-Repetitive Peak Forward Surge Current
IFSM 150 A
8.3 ms Single Half-Sine Wave
Tstg Storage Temperature Range -65 to +175 °C
TJ Operating Junction Temperature -65 to +150 °C

© 2001 Fairchild Semiconductor Corporation www.fairchildsemi.com

MBR1035 - MBR1060 Rev. 1.2.1 1
 MBR1035 - MBR1060 — Schottky Rectifiers
Thermal Characteristics
Symbol Parameter Value Units
PD Power Dissipation 2.0 W
RθJA Thermal Resistance, Junction to Ambient 60 °C/W
RθJL Thermal Resistance, Junction to Lead 2.0 °C/W

Electrical Characteristics
Values are at TA = 25°C unless otherwise noted.
Value
Symbol Parameter Units
MBR1035 MBR1045 MBR1050 MBR1060
IF = 10 A, TC = 25°C 0.80
IF = 10 A, TC = 125°C 0.57 0.70
VF Forward Voltage V
IF = 20 A, TC = 25°C 0.84 0.95
IF = 20 A, TC = 125°C 0.72 0.85
Reverse Current at TC = 25°C 0.1
IR mA
Rated VR TC = 125°C 15
Peak Repetitive Reverse Surge Current
IRRM 1.0 0.5 A
2.0 μs Pulse Width, f = 1.0 kHz

© 2001 Fairchild Semiconductor Corporation www.fairchildsemi.com

MBR1035 - MBR1060 Rev. 1.2.1 2
 MBR1035 - MBR1060 — Schottky Rectifiers
Typical Performance Characteristics

Figure 1. Forward Current Derating Curve Figure 2. Non-Repetitive Surge Current

Figure 3. Forward Voltage Characteristics Figure 4. Reverse Current vs. Reverse Voltage

Figure 5. Total Capacitance Figure 6. Thermal Impedance Characteristics

© 2001 Fairchild Semiconductor Corporation www.fairchildsemi.com

MBR1035 - MBR1060 Rev. 1.2.1 3
 MBR1035 - MBR1060 — Schottky Rectifiers
Physical Dimensions

TO-220 2L

4.036
10.360 3.636
A 0.36 M B A
10.109 C
B 8.89
2.860 1.400 6.477 6.86
2.660 1.146 6.121

7°
3 3°
15.215 12.878
14.757 12.190

8.787
8.587 5° 5°
3° 3°

1 2
0.60 MAX
13.894 2.755
1.65 2.555 3.962
12.941
1.25 3.720
1.91 0.889
0.787
0.36 M C A B
0.457
2.640
0.357
2.440
5.180
4.980

5° NOTES:
5°
3° 3° A. PACKAGE REFERENCE: JEDEC TO220
VARIATION AC.
B. ALL DIMENSIONS ARE IN MILLIMETERS.
C. DIMENSION AND TOLERANCE AS PER ASME
4.672 Y14.5-1994.
4.472 D. DIMENSIONS ARE EXCLUSIVE OF BURRS,
MOLD FLASH AND TIE BAR PROTRUSIONS.
E. THIS PACKAGE IS FSSZ INTERNAL PRODUCTION
AND INTENDED FOR DELTA CUSTOMER ONLY.
F. DRAWING FILE NAME: TO220B02REV4

Figure 7. TO-220, MOLDED, 2-LEAD (ACTIVE)

Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the
warranty therein, which covers Fairchild products.

Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/dwg/TO/TO220B02.pdf.

For current tape and reel specifications, visit Fairchild Semiconductor’s online packaging area:
http://www.fairchildsemi.com/packing_dwg/PKG-TO220B02.pdf.

© 2001 Fairchild Semiconductor Corporation www.fairchildsemi.com

MBR1035 - MBR1060 Rev. 1.2.1 4
 TRADEMARKS

The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.

AccuPower¥ F-PFS¥ Sync-Lock™

AX-CAP®* FRFET® ®
SM ®*
BitSiC¥ Global Power Resource PowerTrench®
Build it Now¥ GreenBridge¥ PowerXS™ TinyBoost®
CorePLUS¥ Green FPS¥ Programmable Active Droop¥ TinyBuck®
CorePOWER¥ Green FPS¥ e-Series¥ QFET® TinyCalc¥
CROSSVOLT¥ Gmax¥ QS¥ TinyLogic®
CTL¥ GTO¥ Quiet Series¥ TINYOPTO¥
Current Transfer Logic¥ IntelliMAX¥ RapidConfigure¥ TinyPower¥
DEUXPEED® ISOPLANAR¥ ¥ TinyPWM¥
Dual Cool™ Making Small Speakers Sound Louder TinyWire¥
EcoSPARK® and Better™ Saving our world, 1mW/W/kW at a time™ TranSiC¥
EfficientMax¥ MegaBuck¥ SignalWise¥ TriFault Detect¥
ESBC¥ MICROCOUPLER¥ SmartMax¥ TRUECURRENT®*
® MicroFET¥ SMART START¥ PSerDes¥
MicroPak¥ Solutions for Your Success¥
Fairchild® MicroPak2¥ SPM®
Fairchild Semiconductor® STEALTH¥
MillerDrive¥ UHC®
FACT Quiet Series¥
MotionMax¥ SuperFET®
Ultra FRFET¥
FACT® SuperSOT¥-3
mWSaver® UniFET¥
FAST® SuperSOT¥-6
OptoHiT¥ VCX¥
FastvCore¥ SuperSOT¥-8
OPTOLOGIC® VisualMax¥
FETBench¥ OPTOPLANAR® SupreMOS®
FPS¥ VoltagePlus¥
SyncFET¥
XS™
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.

DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are 2. A critical component in any component of a life support, device, or
intended for surgical implant into the body or (b) support or sustain system whose failure to perform can be reasonably expected to
life, and (c) whose failure to perform when properly used in cause the failure of the life support device or system, or to affect its
accordance with instructions for use provided in the labeling, can be safety or effectiveness.
reasonably expected to result in a significant injury of the user.

ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their
parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed
applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the
proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild
Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors
are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical
and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise.
Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.

PRODUCT STATUS DEFINITIONS

Definition of Terms
Datasheet Identification Product Status Definition
Datasheet contains the design specifications for product development. Specifications may change
Advance Information Formative / In Design
in any manner without notice.
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Preliminary First Production
Semiconductor reserves the right to make changes at any time without notice to improve design.
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make
No Identification Needed Full Production
changes at any time without notice to improve the design.
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
Obsolete Not In Production
The datasheet is for reference information only.
Rev. I66

© Fairchild Semiconductor Corporation www.fairchildsemi.com