Feb 9, 2023 9:23:08 AM
Characterstic Characteristic value
Diaph.seal, flange,p_level 7MF0814 Remote seal, flange type, for level transmitter Please order
the required transmitter with a separate position
****************************** Please order he required
transmitter with a separate position. System delivery time:
Delivery time of the transmitter included in the delivery time of
the remote seal. ******************************
Connection standard 0 EN1092-1 - Please note: The max. permissible working
pressure (MAWP) of the transmitter and diaphragm seal
determines the nominal pressure rating (PN). The lowest
value (PN) is the max. nominal pressure.
Nominal Size/nominal pressure GD DN80, PN10/16/25/40
Capillary tube length 03 without; direct mount straight connenction, for differential
pressure transmitter
MLFB_CSTIC_13 0 MLFB_CSTIC_13_0
Filling fluid / Standard optimized temperature A Silicon Oil M5 / Standard optimized temperature range: -40
range to +140°C
Wetted parts A stainless steel 316L without coating
Extension length (please specify deviation 2 Standard 100mm/4" (if deviant, specity span from von 51 to
extension length via option code Y44) 100mm/2.01 to 4" via Y44)
Factory certificates C11 Quality inspection certificate (Five-step factory calibration)
to IEC~60770-2
Accessories D42 Remote seal type plate attached
Ambient conditions D66 Ambient temperature range standard range -10 to +50°C
Negative pressure service D83 Negative pressure service (for differential pressure and
level transmitters)
7MF0814-0GD03-0AA2-Z C11+D42+D66+D83 List price: on request
Weight: 6.05 kg
Standard delivery time: 29 day(s)
Disclaimer of Warranty
All information provided on the webpages of Siemens AG is protected by copyright. It is prohibited to copy, process, modify or commercially distribute this
information without the express written permission of Siemens AG.
This information serves informative purposes only and does not contain any binding warranties or representations. The information is provided with the
reservation of changes at any time, including but not limited to technical and commercial changes as well as changes in pricing. Binding declarations are
only given after detailed enquiries.
BECAUSE OF THE INFORMATION BEING ABSOLUTELY NOT BINDING ALL LIABILITY FOR THE ACCURACY OF THE INFORMATION IS EXPRESSLY
EXCLUDED.
On the webpages of Siemens AG you may find links to other webpages which are sometimes not provided by Siemens AG but by third parties. These links
serve informative purposes only. The content of these linked webpages is not provided by or for Siemens AG and Siemens AG does not bear any
responsibility for this content. These linked webpages may be protected by copyrights.
THE USE OF THE WEBPAGES OF Siemens AG IS ON YOUR OWN RISK. THE INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY
KIND INCLUDING ALL IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE,
COURSE OF DEALING OR USAGE OF TRADE. Siemens AG IS NOT LIABLE FOR ANY WARRANTY CLAIMS OR DAMAGES, IRRESPECTIVE OF
THE LEGAL CAUSE, WHETHER IN CONTRACT, WARRANTY, FAILURE OF A REMEDY TO ACHIEVE ITS INTENDED OR ESSENTIAL PURPOSES,
TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, INDEMNITY OR ANY OTHER LEGAL THEORY AND IN PARTICULAR SHALL NOT BE
LIABLE FOR DAMAGES INCURRED AS A RESULT OF CONSULTATION, ASSISTANCE IN SETTING-UP PROCEDURES, BUSINESS INTERRUPTION
OR SOFTWARE DEFECTS, EXCEPT WHERE LIABILITY IS MANDATORY FOR DAMAGES TO PRIVATELY USED PROPERTY OR BECAUSE OF
VIOLATION OF CARDINAL CONTRACTUAL OBLIGATIONS OR DUE TO INTENT, GROSS NEGLIGENCE OR FAILURE TO CONFORM TO EXPRESS
WARRANTIES. HOWEVER, LIABILITY FOR DAMAGES ARISING FROM THE VIOLATION OF CARDINAL CONTRACTUAL OBLIGATIONS SHALL BE
LIMITED TO THE FORESEEABLE DAMAGE NORMALLY COVERED BY A CONTRACT EXCEPT INCASES OF WILFUL MISCONDUCT OR GROSS
NEGLIGENCE.
