water based polymer emuls on technology

The raw material of good quality, high inventory capacity

wide range of products, professional staff
modern facility, perfect manufacturing,
fast and easy export

HISTORY / ESTABLISHMENT

Akripol Kimya, a manufacturer of “Water-Based Polymer Emulsions and Synthetic Thickeners” with more than 35 years of
fund of knowledge and experience in the chemical industry, started its operation in Cerkezkoy Organized Industrial Zone in
2011 by almost shining like a star over Turkish chemical industry. Following the principle that "every factory is a castle",
Akripol Kimya has become one of the few companies in our country that produce water-based polymer emulsions and
synthetic thickeners on the front line of our industry with the new factory investment completed with its own resources in
Tekirdag Velimese Organized Industrial Zone in 2020.

INTRODUCTION TO THE FACTORY

Akripol Kimya is one of the leading water-based polymer emulsion producers in Europe with its high capacity, reactors with
fully automated systems, efficient use of energy, advanced technology, modern laboratories, quality control department,
experienced engineer team, an annual production capacity of 120000 tons, 1500 tons of raw material, and 4000 tons of
finished product inventory capacity. Akripol Kimya, which always prioritizes the quality of manufacturing and the value it
offers to its customers, acts with a visionary perspective, the principles of quality management, sustainable environmental
awareness, and an approach to production according to international standards, and has all the required quality certificates.

sinapol acryprint acrypol

OUR PRODUCTS

In its product portfolio manufactured by its experienced team with an innovative vision by using modern technology; Akripol
Kimya finds solutions for various industries, especially for the Dyeing, Building and Construction Chemicals, Textile and
Coating Industry, Label and Tape Industry, Paper and Packaging Industries. The products are used as the main raw material
for products manufactured by customers in the sector and thus are treated with the utmost care. All stages of the production
process are meticulously monitored with a fully automated system and production is continuously realized at a consistent
quality.

OUR MARKETS

Akripol Kimya has delivered its products to more than 30 countries in many regions of the world with its success in export
markets since its establishment and has become one of the leading companies in the Turkish Chemical Industry abroad as
well as at home. With its wide range of products, quality of production, fast procurement, and sustainability of customer
satisfaction, Akripol Kimya is constantly growing with the aim of being the best in the domestic market and exporting in the
industry.

R&D and QUALITY & CONTROL

Akripol Kimya, which pioneers the industry with its technological investment continuity, R&D innovation, and flawless
production, conducts detailed tests of both pre-production raw materials and manufactured products with its expert
experienced staff and always aims for quality. In addition to providing high and reliable solutions in the industry, it also offers
project-based solutions suitable for the needs by cooperating for joint business development.

THE FUTURE

Akripol Kimya will continue to be one of the leading companies in the industry by closely following the technological
developments, needs of the industry, continuously developing product range in line with the age of innovation, production at
high standards, pursuing the right strategy, and planned growth.
 PAINT

PRODUCT CHEMICAL APPLICATION SOLID CONTENT pH VISCOSITY

Tg ºC MFFT ºC
NAME STRUCTURE FIELD % ± 1.0 ± 1.0 (cps)
Universal styrene acrylic binder for architectural coatings, textured
SINAPOL SPC 500 S/AC finishes, interior & exterior paints, exterior insulation and finishing 50 8 9.000-14.000 19 16
systems (EIFS) and primers

General purpose paint binder with fine particle size and excellent
SINAPOL SPC 577 S/AC coating characteristic which is developed for exterior interior paints, 50 8 8.000-14.000 20 15
texturized coatings and high PVC paints

Medium viscosity binder with excellent binding capacity for

SINAPOL SPC 605 S/AC architectural coatings, textured finishes, interior & exterior paints, 50 8 Max. 1.000 19 16
exterior insulation and finishing systems (EIFS) and primers

Low temperature film forming binder for exterior & interior paints,
SINAPOL SPC 650 S/AC texturized coatings and high PVC paints 50 8 7.000-14.000 4 <0

Ammon a free an on c styrene acryl c d spers on that s developed to be

SINAPOL SPC 676 AF S/AC used n low VOC em ss on nter or and exter or pa nts, pr mers, exter or 50 8 100-1.500 23 18
nsulat on and fin sh ng systems (EIFS).

Silanated low temperature film forming binder for low VOC

SINAPOL SPC 746 S/AC application with excellent water resistance properties 50 8 2.000-5.000 23 10

SINAPOL SPC 758 S/AC S lanetad elast c b nder 50 8 4.000-8.000 -8 <0

Ammon a free low VOC styrene acryl c b nder for nter or&exter or
SINAPOL SPC 067 S/AC pa nts and s l cate pa nts 50 8 500-2.000 2 <0

Universal binder with high scrubb and high UV resistance properties

SINAPOL SPC 202 S/AC for interior&exterior coatings 50 8 1.000-6.000 30 14

SINAPOL SPC 523 S/AC Low temperature film forming binder for low VOC paints and coatings 50 8 2.000-5.000 23 10

SINAPOL SPC 655 S/AC High solid elastic acrylic binder for interior & exterior paints and coatings 55 8 6.500-9.000 -3 <0

Elastic acrylic binder for architectural coatings, textured finishes,

SINAPOL SPC 035 S/AC interior & exterior paints, exterior insulation and finishing systems 50 8 7.000-14.000 0 <0
(EIFS) and primers

Acrylic binder with excellent UV resistance for exterior and interior

SINAPOL APC 512 P/AC paints and coatings 50 8 Max. 3.000 22 15

Acrylic binder with excellent glass and UV resistance for exterior and
SINAPOL APC 524 P/AC nterior paints and coatings 50 8 Max. 3.000 21 14

High viscosity acrylic binder with excellent UV resistance for exterior

SINAPOL APC 450 R P/AC and interior paints and coatings 50 8 3.000-9.000 16 11

B nder for good blush ng res stance, hydrophob c ty and broad

SINAPOL APC 548 P/AC formulat on lat tude 48 8 Max. 1.000 20 17

SINAPOL APC 423 P/AC M d um hard acryl c b nder for sem gloss to gloss pa nts and coat ngs 46 8 Max. 500 17 8

cross-l nked acryl c b nder for h gh gloss, h gh scrub, h gh UV

SINAPOL APC 445 P/AC res stance pa nts and wood coat ng w th excellent hardness property. 45 9 Max. 500 31 27

SINAPOL APC 553 P/AC Fast dry ng acryl c b nder for water based traff c mark ng pa nts 53 10 Max. 1.000 35 30

Cross-l nked acryl c b nder for pa nts and coat ngs w th excellent
SINAPOL APC 506 CS P/AC block res stance 46 8 Max. 500 n/a 10

Acryl c b nder for d rect to metal (DTM) fin shes and topcoats w th

SINAPOL APC 586 P/AC excellent gloss propert es 45 8 Max. 500 39 31

Polymer for paint application and performance improvements,

ACRYPAC OP 202 AC lowers the consumption of TiO2 and reduces the cost of all types of 30 8 Max. 1.000 n/a n/a
water based application formulations
 PAINT

PRODUCT CHEMICAL APPLICATION SOLID CONTENT pH VISCOSITY

Tg ºC MFFT ºC
NAME STRUCTURE FIELD % ± 1.0 ± 1.0 (cps)

General purpose paint binder for ceiling paints, interior paints, semi
SINAPOL VPC 207 V/AC brilliant paints and primers 50 3 1.000-5.000 16 10

General purpose paint binder for ceiling paints, interior paints, semi
SINAPOL VPC 252 V/AC brilliant paints and primers 52 3 2.000-5.000 16 10

High solid general purpose acrylic paint binder for ceiling paints,
SINAPOL VPC 255 V/AC interior paints, semi brilliant paints and primers 55 3 2.000-5.000 16 10

High solid general purpose acrylic paint binder for ceiling paints,
SINAPOL VPC 208 V/AC interior paints, semi brilliant paints and primers 58 3 2.000-5.000 16 8

High viscosity general purpose acrylic paint binder for ceiling paints,
SINAPOL VPC 311 HW V/AC interior paints, semi brilliant paints and primers 50 3 4.000-8.000 16 8

DISPERSING AGENT

PRODUCT CHEMICAL APPLICATION SOLID CONTENT pH VISCOSITY

NAME STRUCTURE FIELD % ± 1.0 ± 1.0 (cps)

SINAPOL DR 340 AC Polyacrylate sodium salt with excellent dispersing properties 40 6.5-7 Max. 1.000

SINAPOL DR 370 AC Polyacrylate ammonium salt with excellent dispersing properties 35 6.5-7 Max. 1.000

SINAPOL DR 345 AC Polyacrylate sodium salt with excellent dispersing properties 45 6.5-7 Max. 5.000

SINAPOL DR 375 AC Polyacrylate ammonium salt with excellent dispersing properties 45 6.5-7 Max. 1.000

RHEOLOGY MODIFIERS

PRODUCT CHEMICAL APPLICATION SOLID CONTENT pH VISCOSITY

NAME STRUCTURE FIELD % ± 1.0 ± 1.0 (cps)

An on c Alkal -Swellable (ASE) Th cken ng Agent for Inter or

SINAPOL ATC 460 AC & Exter or Pa nts and Latex Coat ngs 28 3 Max. 500

An on c Hydrophob cally-Mod fied Alkal -Swellable (HASE)

SINAPOL HC 60 AC Th cken ng Agent for Inter or & Exter or Pa nts and Latex Coat ngs. 28 3 Max. 500

M d Shear An on c Hydrophob cally-Mod fied Alkal -Swellable (HASE)

SINAPOL HC 935 AC Th cken ng Agent for Inter or & Exter or Pa nts and Latex Coat ngs. 30 3 Max. 500

Hydrophob cally mod fied polyurethane (HEUR) th ckener, prov d ng

SINAPOL PUR 30 HEUR excellent flow & level ng, and h gh th cken ng eff c ency for nter or & 30 3 5.000-15.000
exter or pa nts
 CONSTRUCTION

PRODUCT CHEMICAL APPLICATION SOLID CONTENT pH VISCOSITY

Tg ºC MFFT ºC
NAME STRUCTURE FIELD % ± 1.0 ± 1.0 (cps)
Binder for deep penetrating primers and universal primers for
SINAPOL SPC 717 S/AC mineral based surfaces such as concrete, brick, drywall, gypsum and 34 8 Max. 200 12 0
cement-lime plaster

Plast z er free b nder for broad appl cat ons, nclud ng sealants & mas tc
SINAPOL SPC 622 S/AC waterproofing, EIFS adhes ves and pr mers 50 8 6.500-9.000 -4 <0

Plast z er free b nder for broad appl cat ons, nclud ng sealants & mas tc
SINAPOL SPC 625 S/AC waterproofing, EIFS adhes ves and pr mers 50 8 6.500-9.000 -8 <0

2-Compenent styrene acryl c b nder for use n cement t ous

SINAPOL SPC 638 S/AC waterproofing membranes and flex ble mortars 57 7 Max. 1200 -8 <0

2-Compenent h gh elast c styrene acryl c b nder for use n cement t ous

SINAPOL SPC 632 S/AC waterproofing membranes and flex ble mortars 57 7 Max. 2000 -23 <0

H gh sol d 2-Compenent styrene acryl c b nder for use n

SINAPOL SPC 660 S/AC cement t ous waterproofing membranes and flex ble mortars
60 7 Max. 1200 -8 <0

Styrene acryl c b nder w th excellent adhes ve propert es

SINAPOL SPC 065 S/AC for coat ngs and sealants 65 5 Max. 1000 -35 <0

S lanetad flex b le water reppellent b nder for construct on

SINAPOL SPC 758 S/AC appl cat ons such as mo sture barr er coat ngs and roof coat ngs 50 8 4.000-8.000 -8 <0

Styrene acrylic binder for cementitious waterproofing

SINAPOL SPC 750 E S/AC membranes, EIFS basecoats, flexible mortars and tile adhesives 50 4 Max. 500 -36 <0

Un versal elast c b nder for exter or & nter or pa nts and

SINAPOL SPC 627 S/AC construct on appl cat ons 50 8 7.000-13.000 0 <0

All acryl c m d um elast c b nder for nter or&exter or

SINAPOL APC 511 P/AC mosa c plasters 50 8 1.000-4.000 11 3

SINAPOL APC 092 CS P/AC All acryl c b nder for nter or&exter or mosa c plasters 50 8 Max. 5.000 25 15

Hydrophobic binder with excellent blushing resistance for marble stone

SINAPOL APC 548 P/AC finishes, architectural coatings, textured finishes, exterior insulation and 48 8 Max. 500 22 17
finishing systems (EIFS) and wood coatings

All acrylic binder for elastomeric coatings, caulks and

SINAPOL APC 495 P/AC transperent sealants 50 8 5.000-10.000 3 <0

High performance acrylic for elastomeric roof and wall coatings with
SINAPOL APC 888 P/AC superior tensile strength, elongation & weatherability and excellent dirt 60 8 Max. 1.000 -28 <0
pick up resistance

All acrylic cement modifier for both sprayable and patching mortar
SINAPOL APC 447 CM P/AC applications like exterior insulation and finish systems (EIFS) basecoats, 47 9 Max. 500 n/a <3
adhesives and sprayable stucco-type coatings

SINAPOL PA 5050 A/AC All acrylic binder for PVC and flooring adhesive 50 4 Max. 500 -40 <0
 SPECIAL PURPOSE ADHESIVE

PRODUCT CHEMICAL APPLICATION SOLID CONTENT pH VISCOSITY

Tg ºC MFFT ºC
NAME STRUCTURE FIELD % ± 1.0 ± 1.0 (cps)

SINAPOL APT 105 PVA/VA Multipurpose adhesive for textile,wood and coatings 40 n/a 25.000-30.000 30 15

SINAPOL APT 105 WS PVA/VA Low MFFT multipurpose adhesive for textile, wood and coatings 40 n/a 25.000-30.000 30 <0

SINAPOL APT 115 PVA/VA Multipurpose adhesive for textile,wood and coatings 45 n/a 25.000-30.000 30 15

SINAPOL APT 115 WS PVA/VA Low MFFT multipurpose adhesive for textile, wood and coatings 45 n/a 25.000-30.000 30 <0

SINAPOL APT 125 PVA/VA Multipurpose adhesive for textile, wood and coatings 50 n/a 5.000-12.000 30 15

High viscosity low MFFT multipurpose adhesive for textile,

SINAPOL APT 125 WS PVA/VA wood and coatings 50 n/a 25.000-30.000 30 <0

High viscosity multipurpose adhesive for textile, wood and

SINAPOL APT 125 HW PVA/VA coatings 50 n/a 25.000-50.000 30 15

SINAPOL APT 135 PVA/VA High solid multipurpose adhesive for textile, wood and coatings 60 n/a 30.000-40.000 30 15

PRESSURE SENSITIVE ADHESIVE

PRODUCT CHEMICAL APPLICATION SOLID CONTENT pH VISCOSITY

Tg ºC MFFT ºC
NAME STRUCTURE FIELD % ± 1.0 ± 1.0 (cps)

excellent peeling and shearing effect with strong loop tack

SINAPOL PA 406 A/AC adhesive for BOPP aplications
60 7-7.5 Max. 1.000 -42 <0

water based no noise acrylic adhesive for BOPP tapes and

SINAPOL PA 265 A/AC labeling 65 4-7 Max. 1.000 -35 <0

excellent peeling and shearing effect with strong loop tack

SINAPOL PA 507 A/AC adhesive for BOPP aplications 55 8 Max. 500 -46 <0

excellent peeling and shearing effect with strong loop tack

SINAPOL PA 560 A/AC adhesive for BOPP aplications 60 7 Max. 1.000 -30 <0

excellent peeling and shearing effect with strong loop tack

SINAPOL PA 010 A/AC adhesive for BOPP aplications 60 3-7 Max. 1.000 -44 <0
 DETERGENT

PRODUCT CHEMICAL APPLICATION SOLID CONTENT pH VISCOSITY

NAME STRUCTURE FIELD % ± 1.0 ± 1.0 (cps)

SINAPOL DR 370 AC Polyacrylate ammonium salt with excellent dispersing properties. 35 6.5-7 Max. 1.000

SINAPOL DR 340 AC Polyacrylate sodium salt with excellent dispersing properties. 40 6.5-7 Max. 1.000

SINAPOL DR 345 AC Polyacrylate sodium salt with excellent dispersing properties. 45 6.5-7 Max. 5.000

SINAPOL DR 375 AC Polyacrylate ammonium salt with excellent dispersing properties. 45 6.5-7 Max. 1.000

Maleic acid-acrylic acid copolymer sodium salt for inhibition

SINAPOL DR 05 MA/AA incrustation and scale formation in detergent industry 40 8 Max. 5.000

Acrylic acid homopolymer sodium salt for inhibition incrustation

SINAPOL DR 030 AA and scale formation in detergent industry 45 8 Max. 5.000

CARPET BACKCOATING

PRODUCT CHEMICAL APPLICATION SOLID CONTENT pH VISCOSITY

Tg ºC MFFT ºC
NAME STRUCTURE FIELD % ± 1.0 ± 1.0 (cps)

SINAPOL VNC 648 HL V/AC Hard handle acrylic binder for carpet back coating 48 3 Max. 500 30 20

Soft handle acrylic binder for carpet back coating with excellent
SINAPOL ATC 490 HL V/AC block resistance
45 3 Max. 1000 -30 <0

SINAPOL VNC 6050 HL V/AC High solid acrylic binder for carpet back coating 50 3 Max. 500 30 20

SINAPOL SBR 066 *** Special terpolymer for carpet back coating and non-woven 50 8 Max. 3000 n/a 10
 NON-WOVEN

PRODUCT CHEMICAL APPLICATION SOLID CONTENT pH VISCOSITY

Tg ºC MFFT ºC
NAME STRUCTURE FIELD % ± 1.0 ± 1.0 (cps)

SINAPOL NC 920 V/AC Self-crossl nk ng Acryl c Copolymer D spers on for Nonwovens 50 5 50-700 0 <0

SINAPOL NC 924 FF V/AC Self-crossl nk ng Acryl c Copolymer D spers on for Nonwovens 50 5 50-500 0 <0

Acrylic binder with hard-flexiable character for wadding and

SINAPOL VTC 403 V/AC Non-woven felt applications 44 3 Max. 500 27 13

Self-crossl nk ng Acryl c Copolymer D spers on for nonwovens

SINAPOL VNC 58 V/AC & flock ng 44 3 Max. 500 27 13

Flocking, non-woven and coating binder with soft and flexiable

SINAPOL ATC 402 A/AC character 45 3 Max. 1.000 -23 <0

SINAPOL ATC 407 A/AC Flocking, non-woven and coating binder with hard handling 45 3 Max. 500 34 29

Hard textile binder with high filler acceptance and high binding
SINAPOL STC 765 S/AC effect 44 8 Max. 500 31 29

Self-crossl nk ng Acryl c Copolymer D spers on for Nonwovens and

SINAPOL SH 905 S/AC formable non-wovens 45 8 Max. 500 45 35

Flock ng, non-woven and coat ng b nder w th soft and flex able
SINAPOL FL 010 A/AC character 50 5 Max. 1.000 -11 <0

Flocking, non-woven and coating binder with soft and flexiable

SINAPOL FL 520 A/AC character 45 3 50-500 -27 <0

SINAPOL FL 501 A/AC Soft handling binder for textile applications 45 3 20-400 -6 <0

SINAPOL SBR 066 *** Special terpolymer for carpet back coating and non-woven 50 8 Max. 3.000 n/a 10
 TEXTILE

PRODUCT CHEMICAL APPLICATION SOLID CONTENT pH VISCOSITY

Tg ºC MFFT ºC
NAME STRUCTURE FIELD % ± 1.0 ± 1.0 (cps)

SINAPOL STC 765 S/AC Hard textile binder with filler acceptance and high binding effect 44 8 Max. 500 31 29

SINAPOL STC 915 S/AC Pigment printing binder with high fastness properties with soft handling 50 8 Max. 1000 -21 <0

SINAPOL STC 910 S/AC Pigment printing binder with high fastness properties with soft handling 40 8 Max. 500 -14 <0

SINAPOL STC 533 S/AC Pigment printing binder with high fastness properties with soft handling 33 7 Max. 500 -15 <0

SINAPOL STC 024 S/AC Pigment printing binder with soft handling 40 8 Max. 500 -14 <0

SINAPOL STC 418 S/AC Pigment printing binder with high fastness properties with soft handling 40 8 Max. 500 -7 <0

SINAPOL STC 270 MW S/AC Styrene acrylic binder for matwise applications 50 8 Max. 1.000 -15 <0

SINAPOL VTC 405 V/AC High solid pigment printing binder with medium soft handling 50 5 Max. 1.000 -4 <0

SINAPOL VTC 440 V/AC Pigment printing binder with medium soft handling 40 5 Max. 1.000 -3 <0

SINAPOL ATC 401 P/AC Pigment printing binder with soft handling 40 3 Max. 1.000 -19 <0

SINAPOL ATC 580 P/AC Pigment printing binder with very soft handling 40 3 Max. 1.000 -27 <0

SINAPOL ATC 402 FF P/AC Soft handle acrylic binder for textile coating 45 3 Max. 1.000 -23 <0

SINAPOL ATC 407 FF P/AC Hard handle acrylic binder for textile coating 45 3 Max. 500 34 29

SYNTHETIC THICKENERS

PRODUCT CHEMICAL APPLICATION pH

NAME STRUCTURE FIELD ± 1.0

Pigment printing thickener which has high concentration and

ACRYPRINT PT 700 Polyacrylate inverse emulsion high color efficiency and high electrolical stability
6

Reactive printing thickener which has high concentration and

ACRYPRINT RT 800 WE Polyacrylate inverse emulsion high color efficiency and high electrolical stability
6

Reactive printing thickener which has high concentration and

ACRYPRINT RT 800 Polyacrylate inverse emulsion high color efficiency and high electrolical stability
6

Disperse printing thickener which has high concentration and

ACRYPRINT DT 900 Polyacrylate inverse emulsion high color efficiency and high electrolical stability
6

Neutralized pigment printing thickener which has high concentration

ACRYPRINT NF Polyacrylate inverse emulsion and high color efficiency and high electrolical stability
7
Production quality,
Visionary perspective,
Quality management principles,
Sustainable environmental awareness,
Production according to international standards…
 AKRIPOL KIMYA SANAYI TIC. LTD. STI.
Vel mese Organ ze Sanay Bolges 229 Sk. No: 8 Ergene / TEKIRDAG / TURKEY
Phone: +90 282 726 30 60 Fax: +90 282 726 30 61 E-ma l: nfo@akr polk mya.com

www.akr polk mya.com