Scribd
Upload
1K views1 page

EOT Crane Question

The document consists of a series of questions aimed at assessing knowledge and practices related to EOT crane operations. It covers topics such as roles, training, pre-shift inspections, load verification, signaling, safety precautions, and emergency procedures. The questions seek to ensure that operators are knowledgeable about safe and effective crane operation protocols.

Uploaded by

maintenance
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
1K views1 page

EOT Crane Question

The document consists of a series of questions aimed at assessing knowledge and practices related to EOT crane operations. It covers topics such as roles, training, pre-shift inspections, load verification, signaling, safety precautions, and emergency procedures. The questions seek to ensure that operators are knowledgeable about safe and effective crane operation protocols.

Uploaded by

maintenance
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

 What is your current role related to EOT crane operations?

(Operator, Signal Person,


Supervisor)
 How often do you operate an EOT crane?
 Have you received formal training on EOT crane operation and safety procedures?
 Do you perform a thorough pre-shift inspection of the EOT crane before each
operation?
 Which components do you specifically check during your pre-shift inspection? (e.g.,
brakes, hoist ropes, wheels, limit switches, safety devices)
 What actions do you take if you identify any defects or malfunctions during the pre-
shift inspection?
 How do you verify the weight of a load before lifting it with the EOT crane?
 What methods do you use to attach lifting slings or rigging to the load?
 Do you always ensure the load is properly balanced and centered before lifting?
 Who is responsible for providing hand signals to the crane operator during lifting
operations?
 Are you familiar with the standard hand signals used for EOT crane operations?
 What actions do you take if you receive a conflicting or unclear signal from the signal
person.
 How do you ensure a clear path for the crane movement before lifting and traveling
with a load?
 What precautions do you take when operating the crane near people or other
equipment?
 Do you use smooth and controlled movements when lifting and lowering loads to
minimize load swing?
 What steps do you take if the EOT crane experiences a sudden power failure during
lifting operations?
 How do you respond to a situation where the hoist rope becomes entangled or
damaged?
 In case of a mechanical failure, what is your procedure for safely lowering the load
and securing the crane?
 Are you familiar with the crane's rated lifting capacity and load charts?
 What actions do you take if you suspect a load exceeds the crane's capacity?
 Do you understand the importance of not exceeding the designated working area of
the crane?

You might also like