DATASHEET
Lighting Solutions
CEP301AHG, CEP301BHG, CEP301CHG
300 Watt Mercury Arc Lamp Power Supplies
Key Features
• Line input 100 – 240VAC + 10%,
50–60Hz, 5.3 Arms max.
• Environmental: 0°C to 50°C
operating
• Weight: 2.7lbs (1.2kg)
• Dimensions: 6.50” x 4.55” x 2.25”
(165mm x 116mm x 57mm)
• Includes lamp igniter: + 15kV
bilateral ignition pulse
• Ignition time out; approx. 6
seconds. Can be disabled via
jumper configuration.
• Igniter Life > 80,000 strikes
• High reliability
Applications
• For OEM use / integration into
parent system. Not intended for
standalone or bench top
operation.
• Intended for use by electrical
technicians / engineer only after
The CEP301 power supply is designed to run Mercury arc lamps (in a reading operation manual.
constant-power mode (default) or constant current mode (by factory • For use with Mercury arc lamps
request only). The output power is adjustable from 100 Watts (default) or
from 100 to 300 Watts (by factory request only) in power mode with a
built-in potentiometer. EMI line-filtering is built-in to the unit. The supply
includes an isolated +24V output for powering external fans or electronics
and an isolated +5V for powering CMOS level circuitry. Active Power
Factor Correction meets EMC limits for harmonic current emissions, and
limitations of voltage fluctuations and flicker.
www.excelitas.com
1
CEP301 Series
300 Watt Mercury Arc Lamp Power Supplies
Options / Part Numbering
C E P 301 C HG Option 00 1 5 00 3
Mercury
Ground Lamp Jumper Ground
Leakage Type Power Setting* LVPS Setting Lamp Type* Leakage
A < 300µA Fixed* 01 = 100W Fixed* Fixed* 1 < 300µA
B < 30µA 2 < 30µA
C < 100µA 3 < 100µA
* Additional options may be available. Special order from factory required.
Dimensional Information
1 Maximum heat sink temperature 65oC (149oF)
Minimum airflow 48 CFM across ballast (as indicated)
is required for proper cooling at 300W
www.excelitas.com 2
CEP301 Series
300 Watt Mercury Arc Lamp Power Supplies
Specifications
Line input voltage Line input 100 – 240VAC + 10%, 50–60Hz, 5.3 Arms max.
Output power 100 – 300 Watts, constant power
Output regulation Output power to be held within + 5%
Output voltage compliance 10 to 40 V operating
Output current 4.0 to 10.0 ADC
Output ripple < 5% @ 300W (measured in a DC to 20MHz bandwidth)
Efficiency 80% at 300 W output, 120VAC input
Igniter + 15kV nominal (+ 3kV)
> 110 V during boost (pre-ignition) cycle
Minimum repetition rate is 4 strikes / second (+ 2 strikes)
Ignition timer: pulses continue for 6 ± 1 seconds1 (feature may be disabled via jumper).
Igniter Life > 80,000 strikes
1IgnitionTimer is a limited feature which detects lamps that do not start at all. See OM12-1 for full
description of this feature
Auxiliary Outputs +24VDC + 5%, 1.25A max. (SELV rated)
+5VDC + 5%, 0.5A max. (SELV rated)
Signal I/O Optically isolated connector (SELV rated):
• Remote enable input
• Lamp ON indicator
• Lamp over / under voltage indicator
Thermal Protection Ballast is disabled when heat-sink temperature exceeds 90oC
Unit will restart upon cool down and power reset
Ground Leakage CEP301AHG < 300µA @120Vac
CEP301BHG < 30µA @120Vac
CEP301CHG < 100µA @120Vac
Regulatory compliance Approved to UL 60601-1 3rd Edition (excluding EMC and Biocompatibility)
UL File No. E177225
Complies with EN55011 Class B Emissions with appropriate system design
Meets EN 61000-3-2 and EN61000-3-3
CE-marked
NOTE: All values are nominal; specifications subject to change without notice.
Excelitas Technologies Excelitas Technologies Shenzhen Co., Ltd.
Excelitas Technologies Excelitas Technologies Illumination, Inc. Excelitas Technologies Wearnes Technology Center
35 Congress Street LED Solutions, Inc. 44370 Christy Street Elcos GmbH No.10 Kefa Road, Science & Industry Park
Salem, Massachusetts 160 E. Marquardt Drive Fremont, California Luitpoldstrasse 6 Nanshan District,
01970 USA Wheeling, Illinois 94538-3180 USA Pfaffenhofen, 85276 Shenzhen, Guangdong
Telephone: (+1) 978.745.3200 60090 USA Telephone: (+1) 510.979.6500 Germany P.R. of China 518057
Toll free: (+1) 800.950.3441 Telephone: (+1) 847.537.4277 Toll-free: (+1) 800.775.6786 Telephone: (+49) 8441.8917.0 Telephone: +86 2655 3861
Fax: (+1) 978.745.0894 Fax: (+1) 847.537.4785 Fax: (+1) 510.687.1140 Fax: (+49) 8441.7191.0 Fax: +86 755 2661 7311
For a complete listing of our global offices, visit www.excelitas.com/ContactUs
© 2011 Excelitas Technologies Corp. All rights reserved. The Excelitas logo and design are registered trademarks of Excelitas Technologies Corp. All other trademarks
not owned by Excelitas Technologies or its subsidiaries that are depicted herein are the property of their respective owners. Excelitas reserves the right to change
this document at any time without notice and disclaims liability for editorial, pictorial or typographical errors.
02/14/18
www.excelitas.com 3
