GZ BH-UNITY INETNTIONAL CO.
,LTD
HOSON MAB EPS V1.93.03 board instructions
Use head type：epson printhead
Board model：HOSON MAB EPS V1.93.03
F
or head type：JEB EPS R800 V1.93.01
5 6 7 8 9 10 11 12 13 14 15
4 20
3
18 19
17 16
Form 1：
GZ BH-UNITY INETNTIONAL CO.,LTD
item Connector name Connect pic and instructions
24V&42Vpower input，Pay attention to the
24V、42V power input
1 positive, negative and voltage of the power
interface
supply before plugging in
The board is connected with the computer
2 network interface through the network cable for data
communication
The width of printing paper can be detected
by connecting the paper measuring sensor.
3 Paper sensor interface
The model of the sensor connected is
kir6004a
Connect the anti-collision detector, and
Collision avoidance judge whether the machine operates
4
interface normally by detecting the status of the
anti-collision detector
GZ BH-UNITY INETNTIONAL CO.,LTD
Left limit interface in X Left limit signal input of horizontal
5
direction movement in X direction of spray truck
X direction right limit Right limit signal input of horizontal
6
interface movement in X direction of spray truck
Limit of the highest point when the lifting
Cleaning platform lifting
7 motor of the cleaning platform moves
motor upper limit interface
upward
Limit of the lowest point when the lifting
Cleaning platform lifting
8 motor of the cleaning platform moves
motor lower limit interface
downward
Cleaning platform blade Limit interface of cleaning platform blade
9
origin limit interface returning to the original point
GZ BH-UNITY INETNTIONAL CO.,LTD
Lifting platform Motor Interface for controlling the movement of
10
Interface lifting platform
11 Blade motor interface Interface for controlling blade movement
When the selected servo motor in X
direction does not have a code disc, this port
Grating signal output
12 shall be connected to the code disc grating
interface
signal input interface of the drive board of
X motor
X motor control signal Connect to x motor drive board to control
13
interface left and right movement of spray truck
Connect to the Y motor drive board to
Y motor control signal
14 control the paper feeding or returning in the
interface
Y direction
Drive the ink supply motor to supply ink,
and the eight outputs of this interface can be
Ink supply motor drive configured for other purposes by software,
15
interface such as one of them is the drive of the ink
extraction motor of the cleaning platform or
the control of the UV lamp, etc
GZ BH-UNITY INETNTIONAL CO.,LTD
Use 31pin flat cable to connect to the spray
Connection interface of board. Note that P1, P2, P3 and P4 should
16
spray plate correspond to P1, P2, P3 and P4 port
numbers of the spray board one by one
The connection interface between display
17 Key board, display interface screen, key board and main board, the flat
line is 16pin reverse line
Refer to table 2 for the meaning of system
18 Status indicator
operation status indicator lights
The system operation status indicates the
19 Status indicator nixie tube, and the meaning represented by
the displayed value is shown in Table 3
20 Pull out code switch Reset FLASH
表 2：
GZ BH-UNITY INETNTIONAL CO.,LTD
Led light Led light instruction
number name
LED23 Operation status light: this light flashes for seconds to indicate that the system is in normal operation
RUN
state
LED24 LINK Link status light: when the optical fiber is connected normally, the light is on. There is no optical
fiber interface circuit on the board, so it is always on after power on
LED25 BUSY Print control light: this light is on when printing or micro spraying is in progress
LED26 ERROR Abnormal status light: this light is on when printing is in abnormal status
表 3：
Display Meaning
value
0 After initialization, the system runs normally
1 Initialization status: cleaning platform initialization
2 Initialization status: blade return to limit
3 Initialization state: the spray truck moves a distance to the
opposite direction of the origin
4 Initialization state: the spray truck moves to the origin
5 Initialization status: the spray truck bounces for a distance
after returning to the origin; the lifting platform rises to the
moisturizing position
