ENE and ENH are two types of mono- ENE FEATURES:

block wall-mounting enclosures made - Welded studs on the back panel for easy
from a one piece welded steel sheet installation of galvanized mounting plate
body. The main differences between the - 120° door opening angle
- Removable bottom cable gland plate,
two types are the body thicknesses and insulated with or without knockouts
the International Protection (IP) grade. - Earth studs on the door and body
- Single or double waterproof lock

ENH FEATURES:
- Welded studs on the back panel for easy
installation of galvanized mounting plate
- 120° door opening angle
- Removable bottom cable gland plate,
insulated with or without knockouts
- Earth studs on the door and body
- Single or double waterproof lock
- Reversible plain door
- Perforated reinforcement profile
for door strengthening
- Double door for enclosures of
width 1000 and 1200 mm

To provide our customers with the best

Sealant, Sonderhoff polyurethane-
gasket foam machine delivers a suitable
high elasticity sealant that guarantees
a tight fit between the
panels and the body with
approximately 50 years
of lifespan, if maintained
between -40°C and 80°C.

The enclosures have

pre-punched holes
on the back and front
that are either used
Wall Fixing Brackets (Optional Part) for canopy installation,
Used to fix the enclosure on a vertical surface from
the outside, leaving a 9 mm gap between the two.
direct wall fixing or wall
Quantity: 4 pieces fixing bracket placement.

ENE IP MOUNTING PLATE MATERIAL FINISHING

54 Galvanized steel sheet Coated with wrinkled light gray
epoxy-polyester powder RAL 7035
ENH IP TREATMENT
55 SEALING
It undergoes degreasing,
ENCLOSURE MATERIAL phosphating, dual-rinsing, PU-Gasket foam sealant [For
passivating and kiln drying more information, read above]
Mild steel sheet

1
 Gland Plate Dimensions (mm)

* This item is available with

or without knockouts
23,8

11,8

Ø2 Ø4
Ø2,5
B B C C E
G 1,5 200
46
Ø30 30
250 + 300 + 400

194X76
2.8
500 + 600
A A Front
Front
View
View Side
Side
View
View DF 73 66
194X76
28
800

59 50
194X76
28
1000
Bottom View
Bottom View 40 48
194X76
28

2
 The FENH is a mono-block
enclosure made from a one piece
welded steel sheet body.
FENH FEATURES:
- Galvanized mounting plate fixed on
the back panel
- 120° door opening angle
- Sliding bottom cable gland plate,
- Earth studs on the door and body.
- Reversible plain door
- Three point locking system with
double rod fixation
- Perforated reinforcement profiles for
door strengthening

The FENH has

pre-punched holes
on the top, back
and front to occupy
certain accessories.
- The top holes
(Ø14 mm) are for
eye bolt placement for easier lifting
- The front and back holes (Ø6.5 mm)
are for canopy installation.
- The back holes can also be used for For more
direct wall fixing or for wall fixing bracket information
placement. The wall fixing brackets leave about the
a 9 mm space between the enclosure sealant used,
and any vertical surface behind it. go to page 2

B U ILT- IN
AC C E SSORIES

3
 IP TREATMENT SEALING
55 It undergoes degreasing, PU-Gasket foam sealant [For
phosphating, dual-rinsing, more information, see page 2]
ENCLOSURE MATERIAL passivating and kiln drying
Mild steel sheet
FINISHING
MOUNTING PLATE MATERIAL Coated with wrinkled light gray
Galvanized steel sheet epoxy-polyester powder RAL 7035

B C
G 20 Gland Plate
I

A F H

* The gland plate has a sliding

mechanism and leaves a gap
of maximum 85 mm

D 10

4
 There are two kinds of plinth corners, The plinth can be of two heights, 100 mm or
the standard corners and the ones with 200 mm. If a taller plinth height is desired, a
casters. Both kinds can either be paired union of different plinths can be arranged.
with front, rear and side covers to form a
complete plinth, or they can be paired with
lids to form base legs for the enclosure.
The caster corners have a stainless steel
screw each, that can be tightened in order
to fix the enclosure in place. Four polyamide
wheels can withstand 2000 kg of weight.
Overall width Overall depth
Distance between Distance between
connecting holes connecting holes
W1
W2 200 100
D1
D2
100
200
W1
W2

D2
D1

A B

* This canopy option is available upon request

5
 The Operating Control Desk is an
enclosure in which operating systems,
along with their hardware and cables, are
installed. The top section is especially
made to hold monitoring indicators and
buttons. The OCD comes in two types:
- Two-Piece OCD [Top + Bottom Sections]
- Three-Piece OCD [Top + Bottom
Sections + Console]

OCD FEATURES
- Top and bottom sections (and console)
independently folded and seam welded
- Depth-adjustable mounting plates made
from galvanized steel sheets
- 120° reversible doors on front and back
bottom section
- Sliding stopper for top section
and console doors
- A plinth fixed with screws
- Coated with wrinkled
epoxy-polyester powder
• OCD - Light gray RAL 7035
• Plinth - Dark gray RAL 7011
- Earth studs welded on the body and doors
- Single or double waterproof lock

* The gland plate has

a sliding mechanism
and leaves a gap of
maximum 85 mm

IP CABLE GLAND PLATE FINISHING

55 1.5 mm thick galvanized steel sheet Coated with wrinkled light gray
epoxy-polyester powder RAL 7035

BODY PLINTH
SEALING
1.5 mm thick mild steel sheet 2 mm thick mild steel sheet Suitable high elasticity PU-Gasket
[2mm thick mild steel sheet for Top foam sealant made by Sonderhoff
Door of Two-Piece OCD only] gasket machine; guarantees a
TREATMENT
tight fit between the panels and
MOUNTING PLATE It undergoes degreasing, the frame, with approximately
phosphating, dual-rinsing, 50 years of lifespan if maintained
2 mm thick galvanized steel sheet passivating and kiln drying between -40°C and 80°C

6
7