Product information
Klüberfood NH1 11-572
Lubricating grease for the food-processing and pharmaceutical industries
Your benefits at a glance
Considerable cost savings possible through
attractive price-performance ratio
reduced lubricant consumption
Longer maintenance intervals due to good load-carrying capacity and good resistance to wear and corrosion
Easy and convenient application due to good pumpability and metering via centralised lubrication systems
NSF H1 registered and in compliance with kosher and halal requirements
ISO 21469 certified – supports compliance with the hygienic requirements of your production You will find further information about
ISO Standard 21469 on our website www.klueber.com
Your requirements - our solution Application notes
As an operator or OEM of large installations where rolling bearings Klüberfood NH1 11-572 can be applied by standard commercial
run under high loads, you have to observe a wide variety of grease application equipment, e.g. spatula, grease gun or via central
influences: to ensure trouble-free operation, reduce downtime and, lubrication systems.
above all, increasing pressure for cost savings. Our H1-registered
Before applying Klüberfood NH1 11-572, all lubrication points should
Klüberfood NH1 11-572 is both a high-performance and attractively
be thoroughly cleaned to ensure maximum hygiene conditions exist.
priced lubricating grease based on white oil and aluminium complex
This is highly recommended for food-safe H1 lubrication. If your
soap thickener.
production process does not allow cleaning, we recommend you to
Klüberfood NH1 11-572 offers strong antiwear properties, very good replace the existing grease by purging the system during
adhesion and resistance to water. This grease is also highly resistant relubrication.
to oxidation and protects your bearings reliably against corrosion. All
Please do not hesitate to contact our technical consultants and sales
these effects help to reduce your maintenance expenses at a very
departments to discuss grease miscibility, relubrication procedures,
moderate lubricant purchase cost.
etc. If you wish to optimise the service life of your equipment or have
The wide service temperature range of Klüberfood NH1 11-572 any other questions regarding your application, our experts will be
supports optimum lubricant supply to your rolling bearings. pleased to help you.
Customers' experience has shown that with continuous relubrication
the product can be used up to 140 °C. Material safety data sheets
Material safety data sheets can be requested via our website
Klüberfood NH1 11-572 is NSF H1-registered and therefore
www.klueber.com. You may also obtain them through your contact
complies with FDA 21 CFR § 178.3570. The lubricant was
person at Klüber Lubrication.
developed for incidental contact with products and packaging
materials in the food-processing, cosmetics, pharmaceutical or
animal feed industries. The use of Klüberfood NH1 11-572 can
contribute to increase reliability of your production processes. We
nevertheless recommend conducting an additional risk analysis, e.g.
HACCP.
Application
Klüberfood NH1 11-572 is used for the lubrication of rolling bearings
of machines and installations in the food-processing industry, e.g. in
the processing of grain, meal and pellet animal feeds. Besides
lubrication directly at the individual lube point by means of grease
gun or lubricant dispenser, Klüberfood NH1 11-572 can also be
applied to medium-temperature areas conveniently via centralised
lubrication systems, e.g. bearings or rollers in animal feed pellet
presses.
Klüberfood NH1 11-572 , 096162, en-GB
Edition 12.05.2023 - replaces edition 03.03.2023
Product information
Klüberfood NH1 11-572
Lubricating grease for the food-processing and pharmaceutical industries
Pack sizes Klüberfood NH1 11-572
Cartrigde 400 g +
Can 1 kg +
Bucket 25 kg +
Drum 180 kg +
Characteristics Klüberfood NH1 11-572
Article number 096162
Composition, thickener aluminium complex soap
Composition, type of oil white oil
Colour space white
Texture homogeneous
Service temperature, lower limit -15 °C
Service temperature, upper limit 120 °C
NSF H1 registration number 154609
Density, Klüber method: PN 024, 20°C approx. 0.92 g/cm³
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 285 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 315 0.1 mm
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM approx. 45 mm²/s
D7042, 100°C
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM approx. 565 mm²/s
D7042, 40°C
Flow pressure, DIN 51805-2, -15°C ≤ 1400 mbar
Dropping point, DIN ISO 2176 / IP 396 ≥ 230 °C
Four-ball tester, welding load, DIN 51350-4 ≥ 3500 N
SKF FTG 2, Klüber method: equipment: SKF Lub System, 24 h, 25°C, oil separation under ≤ 0.5 mm
compressive load with evidence of thickener curing
Water resistance, DIN 51807-1, 3 h, 90°C 1 - 90 rating
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened 24 months
original container, approx.
Klüberfood NH1 11-572 , 096162, en-GB
Edition 12.05.2023 - replaces edition 03.03.2023
Product information
Klüberfood NH1 11-572
Lubricating grease for the food-processing and pharmaceutical industries
Klüber Lubrication München GmbH & Co. KG /
Geisenhausenerstraße 7 / 81379 München / Germany /
Klüber Lubrication – your global specialist phone +49 89 7876-0 / fax +49 89 7876-333.
Innovative tribological solutions are our passion. Through personal The data in this document is based on our general experience and knowledge at the time of
contact and consultation, we help our customers to be successful publication and is intended to give information of possible applications to a reader with technical
experience. It constitutes neither an assurance of product properties nor does it release the user
worldwide, in all industries and markets. With our ambitious technical
from the obligation of performing preliminary field tests with the product selected for a specific
concepts and experienced, competent staff we have been fulfilling application. All data are guide values which depend on the lubricant's composition, the intended
increasingly demanding requirements by manufacturing efficient high- use and the application method. The technical values of lubricants change depending on the
performance lubricants for more than 90 years. mechanical, dynamical, chemical and thermal loads, time and pressure. These changes may
affect the function of a component. We recommend contacting us to discuss your specific
application. If possible we will be pleased to provide a sample for testing on request. Klüber
products are continually improved. Therefore, Klüber Lubrication reserves the right to change all
the technical data in this document at any time without notice.
Publisher and Copyright: Klüber Lubrication München GmbH & Co. KG. Reprints, total or in
part, are permitted only prior consultation with Klüber Lubrication München GmbH & Co. KG
and if source is indicated and voucher copy is forwarded.
Klüberfood NH1 11-572 , 096162, en-GB
Edition 12.05.2023 - replaces edition 03.03.2023
