PREMIUM QUALITY

WITH REDUCED
CARBON FOOTPRINT

HOT-ROLLED
STEEL STRIP
Range of supply
September 2024

voestalpine Steel Division

www.voestalpine.com/steel
STRUCTURAL STEELS
Yield strength ReH Total elongation
min. Tensile strength Rm min. Notch impact energy KV2 1)
[MPa] [MPa] [%]
A80 A5
Standards and Test Test temperature KV2
Steel grade specifications direction ≤ 16 mm > 16 mm < 3 mm ≥ 3 mm 1.80 - 2.00 mm 2.01 - 2.50 mm 2.51 - 2.99 mm ≥ 3 mm [°C] [Joule]
Unalloyed structural steels / Edging grades
EN 10025-2 ≤ 16 mm > 16 mm < 3 mm ≥ 3 mm 1.80 - 2.00 mm 2.01 - 2.50 mm 2.51 - 2.99 mm ≥ 3 mm Test temperature [°C] KV2 [Joule]
S185 EN 10025-2 Transverse 185 175 310 - 540 290 - 510 10 11 12 16 - -
S235JR 2) 3)
EN 10025-2 Transverse 235 225 360 - 510 360 - 510 17 18 19 24 20 27
S235J0 2) 3) EN 10025-2 Transverse 235 225 360 - 510 360 - 510 17 18 19 24 0 27
S235J2 2) 3) EN 10025-2 Transverse 235 225 360 - 510 360 - 510 17 18 19 24 -20 27
S275JR 2) 3)
EN 10025-2 Transverse 275 265 430 - 580 410 - 560 15 16 17 21 20 27
S275J0 2) 3) EN 10025-2 Transverse 275 265 430 - 580 410 - 560 15 16 17 21 0 27
S275J2 2) 3) EN 10025-2 Transverse 275 265 430 - 580 410 - 560 15 16 17 21 -20 27
S355JR 2) 3) EN 10025-2 Transverse 355 345 510 - 680 470 - 630 14 15 16 20 20 27
S355J0 2) 3) EN 10025-2 Transverse 355 345 510 - 680 470 - 630 14 15 16 20 0 27
S355J2 2) 3) EN 10025-2 Transverse 355 345 510 - 680 470 - 630 14 15 16 20 -20 27
S355K2 2) 3) EN 10025-2 Transverse 355 345 510 - 680 470 - 630 14 15 16 20 -20 40
E295 EN 10025-2 Transverse 295 285 490 - 660 470 - 610 12 13 14 18 - -
E335 EN 10025-2 Transverse 335 325 590 - 770 570 - 710 8 9 10 14 - -
E360 EN 10025-2 Transverse 360 355 690 - 900 670 - 830 5 6 7 10 - -

Weather-resistant structural steels

EN 10025-5 ≤ 16 mm > 16 mm < 3 mm ≥ 3 mm 1.80 - 2.00 mm 2.01 - 2.50 mm 2.51 - 2.99 mm ≥ 3 mm Test temperature [°C] KV2 [Joule]
S355J2W 3)
EN 10025-5 Transverse 355 345 510 - 680 470 - 630 14 15 16 20 -20 27
S355J0W 3)
EN 10025-5 Transverse 355 345 510 - 680 470 - 630 14 15 16 20 0 27

1)
KV2 minimum mean value from three samples (ISO-V, longitudinal), full samples (10 x 10 mm)
2)
Code letter “C” stands for bendability and roll-formability
3)
As-delivered condition: +N (normalized-rolled), +AR (as-rolled)

2 HOT-ROLLED S TEEL S TRIP • R A NG E OF SUPPLY • 09/2024 3

MILD STEELS
Total elongation
min. Bending test transverse
Tensile strength Rm [%] Bending mandrel
Standards and Test Thickness Yield strength Rp0.2 max. Angle = 180°
Steel grade specifications direction [mm] [MPa] [MPa] A80 A5 Sheet thickness = s Period of validity
Mild unalloyed steels for cold forming
EN 10111 Thickness Rp0.2 Rm A80 A5 Mandrel diameter Months
1.8 < 2.0 170 - 360 23 -
DD11 EN 10111 Transverse 2.0 < 3.0 170 - 340 440 24 - - -
≥ 3.0 170 - 340 - 28
1.8 < 2.0 170 - 340 25 -
DD12 EN 10111 Transverse 2.0 < 3.0 170 - 320 420 26 - - 6 months
≥ 3.0 170 - 320 - 30
1.8 < 2.0 170 - 330 28 -
DD13 EN 10111 Transverse 2.0 < 3.0 170 - 310 400 29 - - 6 months
≥ 3.0 170 - 310 - 33
1.8 < 2.0 170 - 310 31 -
DD14 EN 10111 Transverse 2.0 < 3.0 170 - 290 380 32 - - 6 months
≥ 3.0 170 - 290 - 36

4 HOT-ROLLED S TEEL S TRIP • R A NG E OF SUPPLY • 09/2024 5

CARBON STEELS
As-rolled condition Soft-annealed
(standard value) (max. value)
Yield strength Tensile strength Tensile strength
Standards and Rp0.2 Rm Rm Chemical composition
Steel grade specifications [MPa] [MPa] [MPa] Ladle analysis in weight percent
Case-hardening steels
Si P S Ni Mo Cu
EN ISO 683-3 1) Rp0.2 Rm Rm C Mn Cr other
max. max. max. max. max. max.
C10E EN ISO 683-3 300 400 380 0.07 - 0.13 0.40 0.30 - 0.60 0.025 0.035 0.40 0.40 0.10 0.30 -
C15E EN ISO 683-3 330 470 450 0.12 - 0.18 0.40 0.30 - 0.60 0.025 0.035 0.40 0.40 0.10 0.30 -
16MnCr5 EN ISO 683-3 400 600 480 0.14 - 0.19 0.40 1.00 - 1.30 0.025 0.035 0.80 - 1.10 - - 0.40 -

Unalloyed heat-treatable steels

Si P S Cr. Ni Mo Cu
EN ISO 683-1 Rp0.2 Rm Rm C Mn Cr+Mo+Ni
min. max. max. max. max. max. max.
C35E EN ISO 683-1 450 680 500 0.32 - 0.39 0.10 - 0.40 0.50 - 0.80 0.025 0.035 0.40 0.40 0.10 0.30 0.63
C45E EN ISO 683-1 460 750 600 0.42 - 0.50 0.10 - 0.40 0.50 - 0.80 0.025 0.035 0.40 0.40 0.10 0.30 0.63
C50E EN ISO 683-1 490 830 600 0.47 - 0.55 0.10 - 0.40 0.60 - 0.90 0.025 0.035 0.40 0.40 0.10 0.30 0.63
C55E EN ISO 683-1 500 840 600 0.52 - 0.60 0.10 - 0.40 0.60 - 0.90 0.025 0.035 0.40 0.40 0.10 0.30 0.63
C60E EN ISO 683-1 520 860 650 0.57 - 0.65 0.10 - 0.40 0.60 - 0.90 0.025 0.035 0.40 0.40 0.10 0.30 0.63

Alloyed heat-treatable steels

Si P S Ni Cu
EN ISO 683-2 1) Rp0.2 Rm Rm C Mn Cr Mo other
max. max. max. max. max.
25CrMo4 EN ISO 683-2 650 850 550 0.22 - 0.29 0.40 0.60 - 0.90 0.025 0.035 0.90 - 1.20 - 0.15 - 0.30 0.40 -
34CrMo4 EN ISO 683-2 770 970 650 0.30 - 0.37 0.40 0.60 - 0.90 0.025 0.035 0.90 - 1.20 - 0.15 - 0.30 0.40 -
42CrMo4 EN ISO 683-2 790 990 660 0.38 - 0.45 0.40 0.60 - 0.90 0.025 0.035 0.90 - 1.20 - 0.15 - 0.30 0.40 -
51CrV4 EN ISO 683-2 850 1050 680 0.47 - 0.55 0.40 0.60 - 1.00 0.025 0.025 0.80 - 1.10 - - 0.40 V=0.10 - 0.25
20MnB5 EN ISO 683-2 530 680 570 0.17 - 0.23 0.40 1.10 - 1.40 0.025 0.035 - - - 0.40 B=0.0008 - 0.0050
27MnCrB5-2 EN ISO 683-2 490 670 520 0.24 - 0.30 0.40 1.10 - 1.40 0.025 0.035 0.30 - 0.60 - - 0.40 B=0.0008 - 0.0050

Spring steels
Si P S Ni Mo
EN 10089 1) Rp0.2 Rm Rm C Mn Cr V
max. max. max. max. max.
51CrV4 EN 10089 850 1050 680 0.47 - 0.55 0.40 0.70 - 1.10 0.025 0.025 0.90 - 1.20 - - 0.10 - 0.25

1)
Please inquire about any deviations from the indicated melt analyses or narrower limit values.

6 HOT-ROLLED S TEEL S TRIP • R A NG E OF SUPPLY • 09/2024 7

CARBON STEELS
As-rolled condition Soft-annealed
(standard value) (max. value)
Yield strength Tensile strength Tensile strength
Standards and Rp0.2 Rm Rm Chemical composition
Steel grade specifications [MPa] [MPa] [MPa] Ladle analysis in weight percent
Alloyed heat-treatable steels and special steels
EN 10132-4 (chemistry) P S Cu
and voestalpine special grade 1) 2) Rp0.2 Rm Rm C Si Mn Cr Ni Mo other
max. max. max.
D6A voestalpine 980 1250 650 0.42 - 0.49 0.15 - 0.35 0.70 - 1.00 0.025 0.01 0.80 - 1.20 0.40 - 0.70 0.80 - 1.20 0.25 V=0.10 - 0.15
58CrV4 voestalpine 870 1070 680 0.54 - 0.62 0.15 - 0.35 0.70 - 1.10 0.025 0.01 0.90 - 1.20 max. 0.25 max. 0.06 0.25 V=0.10 - 0.25
63NiNb4 voestalpine 700 1000 680 0.60 - 0.66 0.15 - 0.35 0.30 - 0.60 0.025 0.01 max. 0.15 0.85 - 1.10 max. 0.15 0.25 Nb=0.03-0.05
68NiCrMo3 voestalpine 700 1000 680 0.65 - 0.71 0.15 - 0.35 0.30 - 0.60 0.025 0.01 0.40 - 0.60 0.50 - 0.80 0.15 - 0.25 0.25 -
72NiCrMo4-2 voestalpine 700 1000 680 0.69 - 0.75 0.15 - 0.35 0.40 - 0.70 0.025 0.01 0.30 - 0.60 0.70 - 1.00 0.05 - 0.10 0.25 -
75Cr1 voestalpine 700 1000 680 0.70 - 0.80 0.25 - 0.50 0.60 - 0.80 0.025 0.01 0.30 - 0.40 max. 0.25 max. 0.06 0.25 -
75CrNiMo voestalpine 840 1140 680 0.70 - 0.80 0.15 - 0.35 0.60 - 0.90 0.025 0.01 0.50 - 0.70 0.30 - 0.60 0.05 - 0.15 0.25 -
C67S 2)
EN 10132-4 550 950 660 0.65 - 0.73 0.15 - 0.35 0.60 - 0.90 0.025 0.025 max. 0.40 max. 0.40 max. 0.10 - -
C75S 2) EN 10132-4 550 950 680 0.70 - 0.80 0.15 - 0.35 0.60 - 0.90 0.025 0.025 max. 0.40 max. 0.40 max. 0.10 - -
75Ni8 2)
EN 10132-4 740 1100 680 0.72 - 0.78 0.15 - 0.35 0.30 - 0.50 0.025 0.01 max. 0.15 1.80 - 2.10 max. 0.06 0.25 -
80CrV2 2) EN 10132-4 990 1300 720 0.78 - 0.85 0.15 - 0.35 0.40 - 0.70 0.025 0.01 0.40 - 0.60 max. 0.25 max. 0.06 0.25 V=0.15 - 0.25

1)
Please inquire about any deviations from the indicated melt analyses or narrower limit values.
2)
Raw material for steel grades EN10132-4 (standard for cold-rolled strip)

8 HOT-ROLLED S TEEL S TRIP • R A NG E OF SUPPLY • 09/2024 9

CARBON STEELS
As-rolled condition Soft-annealed
(standard value) (max. value)
Yield strength Tensile strength Tensile strength
Standards and Rp0.2 Rm Rm Chemical composition
Steel grade specifications [MPa] [MPa] [MPa] Ladle analysis in weight percent

Boron-containing heat-treatable steels

EN ISO 683-2 Rp0.2 Rm Rm C Si Mn P S Cr Ni V Cu other
and voestalpine special grade max. max. max. max. max.
durostat B2 voestalpine < 550 < 700 - 0.24 - 0.30 0.40 1.10 - 1.40 0.020 0.010 0.30 - 0.50 0.25 - 0.25 B=0.0008 - 0.0050
durostat B4 voestalpine < 600 < 800 - 0.38 - 0.42 0.40 1.10 - 1.40 0.025 0.025 0.30 - 0.50 0.25 - 0.25 B=0.0008 - 0.0050
20MnB5 EN ISO 683-2 500 650 550 0.18 - 0.23 0.40 1.10 - 1.40 0.025 0.035 0.10 - 0.40 0.25 - 0.25 B=0.0008 - 0.0050
20MnB9 voestalpine 600 750 580 0.18 - 0.23 0.40 2.00 - 2.30 0.020 0.010 0.10 - 0.40 0.25 - 0.25 B=0.0008 - 0.0050
26MnB5 voestalpine 500 700 540 0.24 - 0.28 0.40 1.10 -1.40 0.020 0.010 0.10 - 0.40 0.25 - 0.25 B=0.0008 - 0.0050
26MnB5+V voestalpine 600 750 590 0.24 - 0.28 0.40 1.10 - 1.40 0.020 0.010 0.10 - 0.40 0.25 0.05 - 0.10 0.25 B=0.0008 - 0.0050
27MnCrB5-2 EN ISO 683-2 500 700 540 0.24 - 0.30 0.40 1.10 - 1.40 0.035 0.035 0.30 - 0.60 0.25 - 0.25 B=0.0008 - 0.0050
34MnB5 voestalpine 500 700 580 0.32 - 0.37 0.40 1.10 - 1.40 0.020 0.010 0.10 - 0.40 0.25 - 0.25 B=0.0008 - 0.0050
40MnB5 voestalpine 500 700 620 0.38 - 0.42 0.40 1.10 - 1.40 0.020 0.010 0.30 - 0.60 0.25 - 0.25 B=0.0008 - 0.0050

Edging radii Ri
min. at 90° edging
(Sheet thickness = s)
Location of bending edge in
Standard values direction of rolling
Fracture
Standards Yield Tensile elongation
and Hardness 1) strength Rp0.2 strength Rm A5 Chemical composition
Steel grade specifications [HB] [MPa] [MPa] [%] Long. Trans. Ladle analysis in weight percent
Wear-resistant steel grades
C Si Mn P S Al Cr Mo Ti B CEV CET
Special voestalpine grade HB Rp0.2 Rm A5 Long. Trans. max. max. max. max. max. min. max. max. max. max. max. max.
durostat 400 voestalpine 360 - 440 1100 1250 10 4s 3s 0.15 0.60 2.30 0.025 0.010 0.020 0.50 0.20 0.050 0.005 0.59 0.38
durostat 450 voestalpine 410 - 490 1200 1400 9 4s 3s 0.20 0.60 2.30 0.025 0.010 0.020 0.50 0.20 0.050 0.005 0.62 0.42
durostat 500 voestalpine 460 - 540 1300 1550 8 4.5 s 3.5 s 0.24 0.60 2.30 0.025 0.010 0.020 0.50 0.20 0.050 0.005 0.66 0.46

CEV = C + Mn/6 + (Cr+Mo+V)/5 + (Ni+Cu)/15

CET = C + (Mn+Mo)/10 + (Cr+Cu)/20 +Ni/40
1)
Hardness measurements are conducted pursuant to EN ISO 6506. Test condition HBW2.5 | 187.5 is applied to plate thicknesses ≤ 3 mm

10 HOT-ROLLED S TEEL S TRIP • R A NG E OF SUPPLY • 09/2024 11

MICRO-ALLOYED STRUCTURAL STEELS
Edging radii Ri
Total elongation Notch impact energy KV2 1) min. at 90° edging
min. [%] [Joule] Sheet thickness = s
Yield strength Tensile strength
Standards and Test ReH Rm Test temperature Test temperature
Steel grade specifications direction [MPa] [MPa] A80 A5 -20 °C -40 °C < 3 mm 3 - 6 mm > 6 mm
Normalized rolled steels 2)

Special voestalpine grade ReH Rm A80 A5 -20 °C / N -40 °C / NE < 3 mm 3 - 6 mm > 6 mm

alform 180 N voestalpine Transverse 180 - 290 280 - 360 28 34 - - 0.25 s 0.5 s 1s
alform 200 N voestalpine Transverse 200 - 320 320 - 400 26 32 - - 0.25 s 0.5 s 1s
alform 240 N voestalpine Transverse 240 - 360 360 - 470 23 28 27 - 0.25 s 0.5 s 1s
alform 280 N voestalpine Transverse 280 - 420 430 - 530 21 26 40 - 0.25 s 0.5 s 1s
alform 340 N/NE voestalpine Transverse 340 - 485 460 - 570 20 25 40 27 0.25 s 0.5 s 1s
alform 355 N/NE voestalpine Transverse 355 - 500 470 - 580 20 25 40 27 0.25 s 0.5 s 1s
alform 380 N/NE voestalpine Transverse 380 - 520 510 - 610 19 24 40 27 0.25 s 0.5 s 1s

Thermomechanically rolled steels

Special voestalpine grade 3) ReH Rm A80 A5 -20 °C / M -40 °C / ME ≤ 3 mm 3 - 6 mm > 6 mm
alform 280 M voestalpine Longitudinal 280 - 400 370 - 470 24 28 40 - 0.25 s 0.5 s 0.8 s
alform 315 M voestalpine Longitudinal 315 - 440 390 - 490 22 26 40 - 0.25 s 0.5 s 0.8 s
alform 340 M voestalpine Longitudinal 340 - 470 420 - 520 20 24 40 - 0.25 s 0.5 s 0.8 s
alform 355 M/ME voestalpine Longitudinal 355 - 480 430 - 530 20 24 40 27 0.25 s 0.5 s 0.8 s
alform 380 M/ME voestalpine Longitudinal 380 - 510 450 - 550 20 24 40 27 0.25 s 0.5 s 0.8 s
alform 420 M/ME voestalpine Longitudinal 420 - 550 480 - 600 18 22 40 27 0.5 s 1.0 s 1.0 s
alform 460 M/ME voestalpine Longitudinal 460 - 590 520 - 640 16 19 40 27 0.5 s 1.0 s 1.4 s
alform 500 M/ME voestalpine Longitudinal 500 - 650 550 - 680 13 16 40 27 0.8 s 1.2 s 1.6 s
alform 550 M/ME voestalpine Longitudinal ≥ 550 600 - 740 14 17 40 27 0.8 s 1.2 s 1.6 s
alform 600 M/ME voestalpine Longitudinal ≥ 600 650 - 800 13 16 40 27 0.8 s 1.2 s 1.6 s
alform 650 M/ME voestalpine Longitudinal ≥ 650 700 - 850 12 15 40 27 0.8 s 1.2 s 1.6 s
alform 700 M/ME voestalpine Longitudinal ≥ 700 750 - 930 11 14 40 27 0.8 s 1.2 s 1.6 s

EN10149-2 ReH Rm A80 A5 -20 °C 4) -40 °C 4) ≤ 3 mm 3 - 6 mm > 6 mm

S315MC EN10149-2 Longitudinal 315 390 - 510 20 24 40 27 0.25 s 0.5 s 1.0 s
S355MC EN10149-2 Longitudinal 355 430 - 550 19 23 40 27 0.25 s 0.5 s 1.0 s
S420MC EN10149-2 Longitudinal 420 480 - 620 16 19 40 27 0.5 s 1.0 s 1.5 s
S460MC EN10149-2 Longitudinal 460 520 - 670 14 17 40 27 0.5 s 1.0 s 1.5 s
S500MC EN10149-2 Longitudinal 500 550 - 700 12 14 40 27 1.0 s 1.5 s 2.0 s
S550MC EN10149-2 Longitudinal 550 600 - 760 12 14 40 27 1.0 s 1.5 s 2.0 s
S600MC EN10149-2 Longitudinal 600 650 - 820 11 13 40 27 1.0 s 1.5 s 2.0 s
S650MC EN10149-2 Longitudinal 650 700 - 880 10 12 40 27 1.5 s 2.0 s 2.5 s
S700MC EN10149-2 Longitudinal 700 750 - 950 10 12 40 27 1.5 s 2.0 s 2.5 s
S900MC EN10149-2 Longitudinal 900 930 - 1200 7 8 40 - - 4.0 s -

1)
KV2 minimum mean value from three samples (ISO-V, longitudinal), full samples (10 x 10 mm)
2)
These steel grades comply with all requirements of comparable steels pursuant to EN 10025-2.
3)
These steel grades comply with all requirements of comparable steels pursuant to EN 10149-2.
4)
Option to be agreed upon at the time of the order

12 HOT-ROLLED S TEEL S TRIP • R A NG E OF SUPPLY • 09/2024 13

MICRO-ALLOYED STRUCTURAL STEELS
Edging radii 2)
Total elongation Notch impact energy KV2 1) Ri min. at 90° edging
min. [%] [Joule] Sheet thickness = s Mandrel diameter
BgD min.
Yield strength Tensile strength MU MU (transverse test
Standards and Test ReH Rm Test temperature Test temperature specimens)
Steel grade specifications direction [MPa] [MPa] A80 A5 -20 °C -40 °C ≤ 3 mm 3 - 6 mm > 6 mm Sheet thickness = s
Thermomechanically rolled steels with improved formability
Special voestalpine grade ReH Rm A80 A5 -20 °C -40 °C ≤ 3 mm 3 - 6 mm > 6 mm Mandrel diameter
alform 355 MU voestalpine Longitudinal 355 - 480 430 - 530 20 24 40 27 0.25 s 0.5 s 0.8 s 0s
alform 380 MU voestalpine Longitudinal 380 - 510 450 - 550 20 24 40 27 0.25 s 0.5 s 0.8 s 0.5 s
alform 420 MU voestalpine Longitudinal 420 - 550 480 - 580 18 22 40 27 0.5 s 1.0 s 1.0 s 0.5 s
alform 460 MU 3)
voestalpine Longitudinal 460 - 590 520 - 640 16 19 40 27 0.5 s 1.0 s 1.4 s 1.0 s
alform 500 MU voestalpine Longitudinal 500 - 650 550 - 680 15 18 40 27 0.8 s 1.2 s 1.6 s 1.0 s
alform 550 MU 3)
voestalpine Longitudinal ≥ 550 600 - 740 14 17 40 27 0.8 s 1.2 s 1.6 s 1.5 s

1)
KV2 minimum mean value from three samples (ISO-V, longitudinal), full samples (10 x 10 mm)
2)
Smallest permissible inside radius at 90° edging, Ri min.
3)
Upon request

14 HOT-ROLLED S TEEL S TRIP • R A NG E OF SUPPLY • 09/2024 15

MICRO-ALLOYED STRUCTURAL STEELS
Edging radii Ri 2)
Total elongation Notch impact energy KV2 1) min. at 90° edging
min. [%] [Joule] Sheet thickness = s
Yield strength Tensile strength Longitudinal Transverse Longitudinal
Standards and Test ReH Rm Test temperature Test temperature Test temperature
Steel grade specifications direction [MPa] [MPa] A80 A5 -20 °C -20 °C -40 °C < 3 mm 3 - 6 mm > 6 mm
Ultra-high-strength thermomechanically rolled steels 3)

Special voestalpine grade ReH Rm A80 A5 -20 °C -20 °C -40 °C < 3 mm 3 - 6 mm > 6 mm
alform 900 x-treme voestalpine Longitudinal ≥ 900 940 - 1100 - 10 40 30 30 - 2.5 s 3.0 s
alform 960 x-treme voestalpine Longitudinal ≥ 960 980 - 1150 - 10 40 30 30 - 2.5 s 3.0 s
alform 1100 x-treme voestalpine Longitudinal ≥ 1100 1160 - 1350 - 8 27 27 27 - 3.5 s 5.0 s

1)
KV2 minimum mean value from three samples (ISO-V, longitudinal), full samples (10 x 10 mm)
2)
Smallest permissible inside radius at 90° edging for sheet thickness s, bending axis in longitudinal direction
3)
The analysis limits, yield strengths and tensile strengths of the respective steel grades comply with EN 10025-6.
These steel grades comply with all requirements of comparable steels pursuant to EN 10149-2.

16 HOT-ROLLED S TEEL S TRIP • R A NG E OF SUPPLY • 09/2024 17

HOT-ROLLED STEEL STRIP
FOR THE AUTOMOTIVE INDUSTRY
Total elongation
Yield strength Tensile strength min. [%] n value BH2 value
Standards and Rp0.2 Rm min. min.
Steel grade specifications Test direction [MPa] [MPa] A80 A5 n10 - 20/Ag [MPa]
Hot-rolled steel strip for the automotive industry
VDA239-100 Rp0.2 Rm A80 A5 n10 - 20/Ag BH2
and voestalpine special grade
HR0 VDA239-100 Longitudinal 240 - 350 310 - 460 22 28 0.12 -
HR2 VDA239-100 Longitudinal 180 - 290 270 - 400 30 34 0.16 -
HR300LA / LAS VDA239-100 Longitudinal 300 - 400 380 - 500 24 28 0.14 -
HR340LA / LAS VDA239-100 Longitudinal 340 - 440 420 - 540 22 26 0.13 -
HR380LA / LAS VDA239-100 Longitudinal 380 - 480 450 - 570 20 24 - -
HR420LA / LAS VDA239-100 Longitudinal 420 - 520 480 - 600 18 22 - -
HR460LA / LAS VDA239-100 Longitudinal 460 - 560 520 - 640 16 20 - -
HR500LA VDA239-100 Longitudinal 500 - 620 560 - 700 14 17 - -
HR550LA VDA239-100 Longitudinal 550 - 670 610 - 750 12 16 - -
HR600LA VDA239-100 Longitudinal 600 - 730 650 - 800 11 15 - -
HR700LA / LAS VDA239-100 Longitudinal 700 - 850 750 - 950 10 13 - -
HR440Y580T-FB VDA239-100 Longitudinal 440 - 600 580 - 700 16 15 - 30
HR660Y760T-CP VDA239-100 Longitudinal 660 - 820 760 - 960 10 13 - 30
HR750Y950T-CP VDA239-100 Longitudinal 750 - 950 950 - 1150 7 9 - -
HR900Y1180T-MS VDA239-100 Longitudinal 900 - 1150 1180 - 1400 8 5 - -
DP600LCT 1) voestalpine Longitudinal > 300 580 - 670 18 22 0.13 30

1)
Upon request

18 HOT-ROLLED S TEEL S TRIP • R A NG E OF SUPPLY • 09/2024 19

POLE SHEETS STEELS FOR ENAMELLING
Magnetic Standard data Minimum values according to
polarization [Tesla] in as-delivered condition simulation annealing at 830 °C
Total Minimum value at
Yield Tensile elongation min. [%] field intensity Yield Tensile Total elongation Yield Tensile Total elongation
strength strength Standards strength strength min. [%] strength strength min. [%]
Standards and Test Rp0.2 min. Rm min. 5000 15000 and Rp0.2 min. Rm Rp0.2 min. Rm
Steel grade specifications direction [MPa] [MPa] A80 A5 [A/m] [A/m] Steel grade specifications [MPa] [MPa] A80 A5 [MPa] [MPa] A80 A5
Pole sheets Steels for enamelling
5000 15000 Special voestalpine grade Rp0.2 Rm A80 A5 Rp0.2 Rm A80 A5
EN 10265 Rp0.2 Rm A80 A5 [A/m] [A/m]
DD11CCE voestalpine 200 - 300 300 - 400 25 30 170 250 25 30
250-TG-180 EN 10265:1995 Transverse 250 350 22 26 1.60 1.80
DD15CCE voestalpine 140 - 240 260 - 360 28 33 100 250 28 33
300-TG-180 EN 10265:1995 Transverse 300 400 20 24 1.60 1.80
S240CCE voestalpine 240 - 360 360 - 450 22 27 240 360 22 27
350-TG-179 EN 10265:1995 Transverse 350 450 18 22 1.55 1.79
S355CCE voestalpine 600 - 770 650 - 800 - 14 355 500 - 16
400-TG-179 EN 10265:1995 Transverse 400 500 16 19 1.55 1.79
S380CCE voestalpine 620 - 790 670 - 820 - 12 380 550 - 15
450-TG-179 EN 10265:1995 Transverse 450 550 14 17 1.54 1.79
500-TG-179 EN 10265:1995 Transverse 500 600 12 14 1.53 1.79
550-TG-178 EN 10265:1995 Transverse 550 650 12 14 1.52 1.78
600-TG-178 EN 10265:1995 Transverse 600 700 10 12 1.50 1.78
650-TG-178 EN 10265:1995 Transverse 650 750 10 12 1.48 1.78
700-TG-178 EN 10265:1995 Transverse 700 800 10 12 1.46 1.78

Ultra-high-strength pole sheets

5000 15000
Special voestalpine grade Rp0.2 Rm A80 A5 [A/m] [A/m]
750-VA-175 voestalpine Long. + Trans. 750 800 10 12 1.46 1.75

20 HOT-ROLLED S TEEL S TRIP • R A NG E OF SUPPLY • 09/2024 21

SURFACES AND DIMENSIONS
SYSTEM SOLUTIONS
Surface Available dimensions: wide strip (coil)
Product variant Unoiled Slightly oiled Oiled Oiled edges Heavily oiled Thickness 1) Width Outside diameter Inside diameter
[mm] max. [mm] max. [mm] [mm]
Pickled (+ skin-passed)
1.80 - 20.00 900 - 1750 2200 500, 600, 720 - 780
Unpickled Unpickled material is only supplied in unoiled condition

» Types of oil: Corrosion protection oil, rolling oil » Non-slit in coils, with mill edge or cut edge

1)
Thicknesses smaller than 1.80 mm upon request
System solutions: alform® welding system
alform® welding system is the world’s first custom-matched system of steels and consumables and allows optimized Available dimensions: slit (slit strip)
utilization of material potential.
Thickness 1) Strip width Outside diameter Inside diameter
[mm] [mm] [mm] [mm]
1.80 - 12.00 min. 50 900 - 2020 500 2) / 600 / 760

» Longitudinally slit in coils with cut edge

1)
Thicknesses smaller than 1.80 mm upon request
2)
Only up to 7 mm in thickness
Hot-rolled steel strip – greentec steel Edition
Premium quality with reduced carbon footprint
Max. carbon footprint 1.95 kg CO2e per kg of steel 1) Available dimensions: cut-to-length (sheet)
1)
per EN 15804+A2 (EPD methodology) cradle to gate
Thickness Width Length Package weight
[mm] [mm] [mm] max. [t]
2.0 - 20.00 900 - 1750 1250 - 18000 10

All products, dimensions and steel grades listed in each voestalpine supply range are available as greentec steel Edition.
» Cut-to-length sheet with mill edge or cut edge

Indicated references are standard values. The available combinations of widths and thicknesses and supply forms vary
depending on the steel grade. Limitations are possible depending on thickness. Cut-to-length sheets in < 3.0 mm thickness
and slit strip in < 4.5 mm thickness can be preprocessed upon request in the slitting and cut-to-length lines for cold-rolled
materials.

All listed dimensions and grades are available as greentec steel.

This document provides an overview of the hot-rolled steel strip products supplied by the voestalpine Steel Division. Other
grades are available upon request. Please find further information and downloads under the following link:
www.voestalpine.com/Produktinformationsportal

The information and product properties contained in this printed material are non-binding and serve the sole purpose of technical orientation.
They do not replace individual advisory services provided by our sales and customer service teams. The product information and characteristics
set forth herein shall not be considered as guaranteed properties unless explicitly stipulated in a separate contractual agreement. For this rea-
son, voestalpine shall not grant any warranty nor be held liable for properties and/or specifications other than those subject to explicit agree-
ment. This also applies to the suitability and applicability of products for certain applications as well as to the further processing of materials
into final products. All application risks and suitability risks shall be borne by the customer. The General Terms of Sale for Goods and Services of
the voestalpine Steel Division shall apply to all materials supplied by the voestalpine Steel Division and can be accessed using the following link:
www.voestalpine.com/stahl/en/The-Steel-Division/General-Terms-of-Sale

Technical changes are reserved. Errors and misprints are excepted. No part of this publication may be reprinted without explicit written
permission by voestalpine Stahl GmbH.

22 HOT-ROLLED S TEEL S TRIP • R A NG E OF SUPPLY • 09/2024 23

09/2024

voestalpine Steel Division

voestalpine-Straße 3
4020 Linz, Austria
[email protected]
www.voestalpine.com/steel