Scribd
Upload
9 views4 pages

تجربة كهرباء11

The document outlines an electricity lab experiment focused on connecting resistors in series and parallel, supervised by Dr. Zuhair Hamid and prepared by Atheer Saad Jassim. The aim is to study the properties of resistors in different configurations, detailing the theoretical principles, devices used, and practical procedures for conducting the experiment. It includes calculations for total current, voltage, and resistance, along with a discussion comparing practical and theoretical results.

Uploaded by

joneey123
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
9 views4 pages

تجربة كهرباء11

The document outlines an electricity lab experiment focused on connecting resistors in series and parallel, supervised by Dr. Zuhair Hamid and prepared by Atheer Saad Jassim. The aim is to study the properties of resistors in different configurations, detailing the theoretical principles, devices used, and practical procedures for conducting the experiment. It includes calculations for total current, voltage, and resistance, along with a discussion comparing practical and theoretical results.

Uploaded by

joneey123
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Electricity lab

Name of Experiment
Connecting resistors in series and parallel

Supervised by: Dr. Zuhair Hamid


Prepared by the student: Atheer Saad Jassim

Al-Kunooz Private University


Department of Power Mechanical Engineering
Technologies
First year / A / Evening study
No of Experiment:- (2)

Name of Experiment:- Connecting resistors in series and parallel

Aim of Experiment :- to study the properties of connecting resistors in series


and parallel.
Theoretical summary-: When a set of resistors are connected in series of the
current flowing in the circuit is one , which is the source current and the
voltage difference between each resistor is directly Proportional to the valve
of the resistance the sum of the voltage drops across the resistors Connected
in the circuit equals the electromotive force of the valve of the equivalent
resistance of the circuit equals the sum of the resistors connected in:-
1- Series Circuit
IT = I1= I2 = I3=I4=……………….. In
VT = V1 + V2 + V3 + V4 + ……….. + Vn
RT = R1 + R2+ R3 + R4 + …………..+ Rn
Devices used-:
1- Voltage source
2- Multimeter
3- Resistors (100, 220 , 330, 470, )Ω
4- Connecting wires

How it works-:
1- Set the source voltage to (10 ) volt
2- Connect the circuit shown in fig (1) and record the valve of the current
and voltage difference each resistor
3- Connect the resistor in parallel in fig (2 ) and record the current and
voltage of the resistor
Practical calculations:-
If the resistance is connected in series

If the resistance is connected in parallel

Discussion:-
Calculate the total current, voltage, current of each resistor and the
Theoretical equivalent resistance in case of series and parallel and
compare the practical and theoretical results.

You might also like