Advanced BashScripting Guide

Table of Contents
Chapter 1. Why Shell Programming?...............................................................................................................1 Chapter 2. Starting Off With a ShaBang.......................................................................................................3 2.1. Invoking the script............................................................................................................................5 2.2. Preliminary Exercises.......................................................................................................................5 Part 2. Basics.......................................................................................................................................................6 Chapter 3. Special Characters...........................................................................................................................7 Chapter 4. Introduction to Variables and Parameters ..................................................................................23 4.1. Variable Substitution......................................................................................................................23 4.2. Variable Assignment......................................................................................................................25 . 4.3. Bash Variables Are Untyped..........................................................................................................26 4.4. Special Variable Types...................................................................................................................28 Chapter 5. Quoting...........................................................................................................................................32 Chapter 6. Exit and Exit Status.......................................................................................................................38 Chapter 7. Tests................................................................................................................................................40 7.1. Test Constructs...............................................................................................................................40 7.2. File test operators............................................................................................................................46 7.3. Comparison operators (binary).......................................................................................................49 7.4. Nested if/then Condition Tests.......................................................................................................54 7.5. Testing Your Knowledge of Tests..................................................................................................54 Chapter 8. Operations and Related Topics....................................................................................................55 8.1. Operators.........................................................................................................................................55 8.2. Numerical Constants.......................................................................................................................61 Part 3. Beyond the Basics.................................................................................................................................63 Chapter 9. Variables Revisited........................................................................................................................64 9.1. Internal Variables............................................................................................................................64 9.2. Manipulating Strings .......................................................................................................................79 9.2.1. Manipulating strings using awk............................................................................................83 9.2.2. Further Discussion .................................................................................................................84 9.3. Parameter Substitution....................................................................................................................84 9.4. Typing variables: declare or typeset...............................................................................................92 9.5. Indirect References to Variables.....................................................................................................94 9.6. $RANDOM: generate random integer............................................................................................96 9.7. The Double Parentheses Construct...............................................................................................101 Chapter 10. Loops and Branches..................................................................................................................103 10.1. Loops..........................................................................................................................................103 10.2. Nested Loops..............................................................................................................................113 10.3. Loop Control...............................................................................................................................114 i

Advanced BashScripting Guide

Table of Contents
Chapter 10. Loops and Branches 10.4. Testing and Branching................................................................................................................117 Chapter 11. Internal Commands and Builtins.............................................................................................125 11.1. Job Control Commands..............................................................................................................145 Chapter 12. External Filters, Programs and Commands...........................................................................149 12.1. Basic Commands........................................................................................................................149 12.2. Complex Commands ...................................................................................................................152 12.3. Time / Date Commands..............................................................................................................159 12.4. Text Processing Commands ........................................................................................................161 12.5. File and Archiving Commands...................................................................................................177 12.6. Communications Commands......................................................................................................192 12.7. Terminal Control Commands.....................................................................................................196 12.8. Math Commands.........................................................................................................................197 12.9. Miscellaneous Commands..........................................................................................................205 Chapter 13. System and Administrative Commands..................................................................................215 Chapter 14. Command Substitution.............................................................................................................237 Chapter 15. Arithmetic Expansion................................................................................................................242 Chapter 16. I/O Redirection ...........................................................................................................................243 16.1. Using exec ...................................................................................................................................245 16.2. Redirecting Code Blocks............................................................................................................248 16.3. Applications................................................................................................................................252 Chapter 17. Here Documents.........................................................................................................................254 Chapter 18. Recess Time................................................................................................................................263 Part 4. Advanced Topics .................................................................................................................................264 Chapter 19. Regular Expressions..................................................................................................................265 19.1. A Brief Introduction to Regular Expressions ..............................................................................265 19.2. Globbing.....................................................................................................................................268 Chapter 20. Subshells.....................................................................................................................................270 Chapter 21. Restricted Shells.........................................................................................................................273 Chapter 22. Process Substitution ...................................................................................................................275 Chapter 23. Functions....................................................................................................................................277 23.1. Complex Functions and Function Complexities.........................................................................279 23.2. Local Variables...........................................................................................................................286 23.2.1. Local variables make recursion possible...........................................................................287 ii

Advanced BashScripting Guide

Table of Contents
Chapter 24. Aliases.........................................................................................................................................289 Chapter 25. List Constructs...........................................................................................................................292 Chapter 26. Arrays.........................................................................................................................................295 Chapter 27. Files.............................................................................................................................................314 Chapter 28. /dev and /proc.............................................................................................................................315 28.1. /dev ..............................................................................................................................................315 28.2. /proc............................................................................................................................................315 Chapter 29. Of Zeros and Nulls.....................................................................................................................320 Chapter 30. Debugging...................................................................................................................................323 Chapter 31. Options........................................................................................................................................329 Chapter 32. Gotchas.......................................................................................................................................331 Chapter 33. Scripting With Style..................................................................................................................337 33.1. Unofficial Shell Scripting Stylesheet..........................................................................................337 Chapter 34. Miscellany...................................................................................................................................340 34.1. Interactive and noninteractive shells and scripts......................................................................340 34.2. Shell Wrappers............................................................................................................................341 34.3. Tests and Comparisons: Alternatives ..........................................................................................344 34.4. Recursion....................................................................................................................................345 34.5. "Colorizing" Scripts....................................................................................................................346 34.6. Optimizations..............................................................................................................................350 34.7. Assorted Tips..............................................................................................................................351 34.8. Security Issues............................................................................................................................359 34.9. Portability Issues.........................................................................................................................359 34.10. Shell Scripting Under Windows...............................................................................................360 Chapter 35. Bash, version 2...........................................................................................................................361 Chapter 36. Endnotes.....................................................................................................................................366 36.1. Author's Note..............................................................................................................................366 36.2. About the Author........................................................................................................................366 36.3. Tools Used to Produce This Book..............................................................................................366 36.3.1. Hardware...........................................................................................................................366 36.3.2. Software and Printware.....................................................................................................366 36.4. Credits.........................................................................................................................................367 Bibliography....................................................................................................................................................369

iii

Advanced BashScripting Guide

Table of Contents
Appendix A. Contributed Scripts..................................................................................................................374 Appendix B. Reference Cards........................................................................................................................413 Appendix C. A Sed and Awk MicroPrimer ................................................................................................416 C.1. Sed................................................................................................................................................416 C.2. Awk..............................................................................................................................................419 Appendix D. Exit Codes With Special Meanings.........................................................................................421 Appendix E. A Detailed Introduction to I/O and I/O Redirection.............................................................422 Appendix F. Localization...............................................................................................................................424 Appendix G. History Commands..................................................................................................................426 Appendix H. A Sample .bashrc File..............................................................................................................427 Appendix I. Converting DOS Batch Files to Shell Scripts..........................................................................438 Appendix J. Exercises.....................................................................................................................................442 J.1. Analyzing Scripts..........................................................................................................................442 J.2. Writing Scripts..............................................................................................................................443 Appendix K. Copyright..................................................................................................................................449

iv

Chapter 1. Why Shell Programming?

A working knowledge of shell scripting is essential to anyone wishing to become reasonably proficient at system administration, even if they do not anticipate ever having to actually write a script. Consider that as a Linux machine boots up, it executes the shell scripts in /etc/rc.d to restore the system configuration and set up services. A detailed understanding of these startup scripts is important for analyzing the behavior of a system, and possibly modifying it. Writing shell scripts is not hard to learn, since the scripts can be built in bitesized sections and there is only a fairly small set of shellspecific operators and options [1] to learn. The syntax is simple and straightforward, similar to that of invoking and chaining together utilities at the command line, and there are only a few "rules" to learn. Most short scripts work right the first time, and debugging even the longer ones is straightforward. A shell script is a "quick and dirty" method of prototyping a complex application. Getting even a limited subset of the functionality to work in a shell script, even if slowly, is often a useful first stage in project development. This way, the structure of the application can be tested and played with, and the major pitfalls found before proceeding to the final coding in C, C++, Java, or Perl. Shell scripting hearkens back to the classical UNIX philosophy of breaking complex projects into simpler subtasks, of chaining together components and utilities. Many consider this a better, or at least more esthetically pleasing approach to problem solving than using one of the new generation of high powered allinone languages, such as Perl, which attempt to be all things to all people, but at the cost of forcing you to alter your thinking processes to fit the tool. When not to use shell scripts resourceintensive tasks, especially where speed is a factor (sorting, hashing, etc.) procedures involving heavyduty math operations, especially floating point arithmetic, arbitrary precision calculations, or complex numbers (use C++ or FORTRAN instead) crossplatform portability required (use C instead) complex applications, where structured programming is a necessity (need typechecking of variables, function prototypes, etc.) missioncritical applications upon which you are betting the ranch, or the future of the company situations where security is important, where you need to guarantee the integrity of your system and protect against intrusion, cracking, and vandalism project consists of subcomponents with interlocking dependencies extensive file operations required (Bash is limited to serial file access, and that only in a particularly clumsy and inefficient linebyline fashion) need multidimensional arrays need data structures, such as linked lists or trees need to generate or manipulate graphics or GUIs need direct access to system hardware need port or socket I/O need to use libraries or interface with legacy code proprietary, closedsource applications (shell scripts put the source code right out in the open for all the world to see) If any of the above applies, consider a more powerful scripting language, perhaps Perl, Tcl, Python, Ruby, or possibly a highlevel compiled language such as C, C++, or Java. Even then, prototyping the application as a shell script might still be a useful development step. Chapter 1. Why Shell Programming? 1

Advanced BashScripting Guide We will be using Bash, an acronym for "BourneAgain Shell" and a pun on Stephen Bourne's now classic Bourne Shell. Bash has become a de facto standard for shell scripting on all flavors of UNIX. Most of the principles dealt with in this book apply equally well to scripting with other shells, such as the Korn Shell, from which Bash derives some of its features, [2] and the C Shell and its variants. (Note that C Shell programming is not recommended due to certain inherent problems, as pointed out in an October, 1993 Usenet post by Tom Christiansen.) What follows is a tutorial on shell scripting. It relies heavily on examples to illustrate various features of the shell. The example scripts work they've been tested and some of them are even useful in real life. The reader can play with the actual working code of the examples in the source archive (scriptname.sh), [3] give them execute permission (chmod u+rx scriptname), then run them to see what happens. Should the source archive not be available, then cutandpaste from the HTML, pdf, or text rendered versions. Be aware that some of the scripts below introduce features before they are explained, and this may require the reader to temporarily skip ahead for enlightenment. Unless otherwise noted, the author of this book wrote the example scripts that follow.

Chapter 1. Why Shell Programming?

Chapter 2. Starting Off With a ShaBang

In the simplest case, a script is nothing more than a list of system commands stored in a file. At the very least, this saves the effort of retyping that particular sequence of commands each time it is invoked.

Example 21. cleanup: A script to clean up the log files in /var/log

# cleanup # Run as root, of course. cd /var/log cat /dev/null > messages cat /dev/null > wtmp echo "Logs cleaned up."

There is nothing unusual here, just a set of commands that could just as easily be invoked one by one from the command line on the console or in an xterm. The advantages of placing the commands in a script go beyond not having to retype them time and again. The script can easily be modified, customized, or generalized for a particular application.

Example 22. cleanup: An enhanced and generalized version of above script.

#!/bin/bash # cleanup, version 2 # Run as root, of course. LOG_DIR=/var/log ROOT_UID=0 # LINES=50 # E_XCD=66 # E_NOTROOT=67 #

Only users with $UID 0 have root privileges. Default number of lines saved. Can't change directory? Nonroot exit error.

if [ "$UID" ne "$ROOT_UID" ] then echo "Must be root to run this script." exit $E_NOTROOT fi if [ n "$1" ] # Test if command line argument present (nonempty). then lines=$1 else lines=$LINES # Default, if not specified on command line. fi

# Stephane Chazelas suggests the following, #+ as a better way of checking command line arguments, #+ but this is still a bit advanced for this stage of the tutorial. # # E_WRONGARGS=65 # Nonnumerical argument (bad arg format) # # case "$1" in

Chapter 2. Starting Off With a ShaBang

Advanced BashScripting Guide

# "" ) lines=50;; # *[!09]*) echo "Usage: `basename $0` filetocleanup"; exit $E_WRONGARGS;; # * ) lines=$1;; # esac # #* Skip ahead to "Loops" chapter to decipher all this.

cd $LOG_DIR if [ `pwd` != "$LOG_DIR" ] # or if [ "$PWD" != "$LOG_DIR" ] # Not in /var/log?

then echo "Can't change to $LOG_DIR." exit $E_XCD fi # Doublecheck if in right directory, before messing with log file. # far more efficient is: # # cd /var/log || { # echo "Cannot change to necessary directory." >&2 # exit $E_XCD; # }

tail $lines messages > mesg.temp # Saves last section of message log file. mv mesg.temp messages # Becomes new log directory.

# cat /dev/null > messages #* No longer needed, as the above method is safer. cat /dev/null > wtmp # echo "Logs cleaned up." ': > wtmp' and '> wtmp' have the same effect.

exit 0 # A zero return value from the script upon exit #+ indicates success to the shell.

Since you may not wish to wipe out the entire system log, this variant of the first script keeps the last section of the message log intact. You will constantly discover ways of refining previously written scripts for increased effectiveness. The shabang ( #!) at the head of a script tells your system that this file is a set of commands to be fed to the command interpreter indicated. The #! is actually a twobyte [4] "magic number", a special marker that designates a file type, or in this case an executable shell script (see man magic for more details on this fascinating topic). Immediately following the shabang is a path name. This is the path to the program that interprets the commands in the script, whether it be a shell, a programming language, or a utility. This command interpreter then executes the commands in the script, starting at the top (line 1 of the script), ignoring comments. [5]
#!/bin/sh #!/bin/bash #!/usr/bin/perl #!/usr/bin/tcl #!/bin/sed f #!/usr/awk f

Chapter 2. Starting Off With a ShaBang

Advanced BashScripting Guide Each of the above script header lines calls a different command interpreter, be it /bin/sh, the default shell (bash in a Linux system) or otherwise. [6] Using #!/bin/sh, the default Bourne Shell in most commercial variants of UNIX, makes the script portable to nonLinux machines, though you may have to sacrifice a few Bashspecific features. The script will, however, conform to the POSIX [7] sh standard. Note that the path given at the "shabang" must be correct, otherwise an error message usually "Command not found" will be the only result of running the script. #! can be omitted if the script consists only of a set of generic system commands, using no internal shell directives. The second example, above, requires the initial #!, since the variable assignment line, lines=50, uses a shellspecific construct. Note again that #!/bin/sh invokes the default shell interpreter, which defaults to /bin/bash on a Linux machine. This tutorial encourages a modular approach to constructing a script. Make note of and collect "boilerplate" code snippets that might be useful in future scripts. Eventually you can build a quite extensive library of nifty routines. As an example, the following script prolog tests whether the script has been invoked with the correct number of parameters.
if [ $# ne Number_of_expected args ] then echo "Usage: `basename $0` whatever" exit $WRONG_ARGS fi

2.1. Invoking the script

Having written the script, you can invoke it by sh scriptname, [8] or alternatively bash scriptname. (Not recommended is using sh <scriptname, since this effectively disables reading from stdin within the script.) Much more convenient is to make the script itself directly executable with a chmod. Either: chmod 555 scriptname (gives everyone read/execute permission) [9] or chmod +rx scriptname (gives everyone read/execute permission) chmod u+rx scriptname (gives only the script owner read/execute permission) Having made the script executable, you may now test it by ./scriptname. [10] If it begins with a "shabang" line, invoking the script calls the correct command interpreter to run it. As a final step, after testing and debugging, you would likely want to move it to /usr/local/bin (as root, of course), to make the script available to yourself and all other users as a systemwide executable. The script could then be invoked by simply typing scriptname [ENTER] from the command line.

2.2. Preliminary Exercises

1. System administrators often write scripts to automate common tasks. Give several instances where such scripts would be useful. 2. Write a script that upon invocation shows the time and date, lists all loggedin users, and gives the system uptime. The script then saves this information to a logfile. Chapter 2. Starting Off With a ShaBang 5

Part 2. Basics
Table of Contents 3. Special Characters 4. Introduction to Variables and Parameters 4.1. Variable Substitution 4.2. Variable Assignment 4.3. Bash Variables Are Untyped 4.4. Special Variable Types 5. Quoting 6. Exit and Exit Status 7. Tests 7.1. Test Constructs 7.2. File test operators 7.3. Comparison operators (binary) 7.4. Nested if/then Condition Tests 7.5. Testing Your Knowledge of Tests 8. Operations and Related Topics 8.1. Operators 8.2. Numerical Constants

Part 2. Basics

Chapter 3. Special Characters

Special Characters Found In Scripts and Elsewhere # Comments. Lines beginning with a # (with the exception of #!) are comments.
# This line is a comment.

Comments may also occur at the end of a command.

echo "A comment will follow." # Comment here.

Comments may also follow whitespace at the beginning of a line.

# A tab precedes this comment.

A command may not follow a comment on the same line. There is no method of terminating the comment, in order for "live code" to begin on the same line. Use a new line for the next command. Of course, an escaped # in an echo statement does not begin a comment. Likewise, a # appears in certain parameter substitution constructs and in numerical constant expressions.
echo echo echo echo "The # here does not begin a comment." 'The # here does not begin a comment.' The \# here does not begin a comment. The # here begins a comment. # Parameter substitution, not a comment. # Base conversion, not a comment.

echo ${PATH#*:} echo $(( 2#101011 )) # Thanks, S.C.

The standard quoting and escape characters (" ' \) escape the #. Certain pattern matching operations also use the #. ; Command separator. [Semicolon] Permits putting two or more commands on the same line.
echo hello; echo there

Note that the ";" sometimes needs to be escaped. ;; Terminator in a case option. [Double semicolon]
case "$variable" in abc) echo "$variable = abc" ;; xyz) echo "$variable = xyz" ;; esac

Chapter 3. Special Characters

Advanced BashScripting Guide . "dot" command. [period] Equivalent to source (see Example 1118). This is a bash builtin. . "dot", as a component of a filename. When working with filenames, a dot is the prefix of a "hidden" file, a file that an ls will not normally show.
bash$ touch .hiddenfile bash$ ls l total 10 rwrr 1 bozo rwrr 1 bozo rwrr 1 bozo

4034 Jul 18 22:04 data1.addressbook 4602 May 25 13:58 data1.addressbook.bak 877 Dec 17 2000 employment.addressbook

bash$ ls al total 14 drwxrwxrx drwx rwrr rwrr rwrr rwrwr

2 52 1 1 1 1

bozo bozo bozo bozo bozo bozo

bozo bozo bozo bozo bozo bozo

1024 3072 4034 4602 877 0

Aug Aug Jul May Dec Aug

29 29 18 25 17 29

20:54 20:51 22:04 13:58 2000 20:54

./ ../ data1.addressbook data1.addressbook.bak employment.addressbook .hiddenfile

When considering directory names, a single dot represents the current working directory, and two dots denote the parent directory.
bash$ pwd /home/bozo/projects bash$ cd . bash$ pwd /home/bozo/projects bash$ cd .. bash$ pwd /home/bozo/

The dot often appears as the destination (directory) of a file movement command.
bash$ cp /home/bozo/current_work/junk/* .

. "dot" character match. When matching characters, as part of a regular expression, a "dot" matches a single character. " partial quoting. [double quote] "STRING" preserves (from interpretation) most of the special characters within STRING. See also Chapter 5. ' full quoting. [single quote] 'STRING' preserves all special characters within STRING. This is a stronger form of quoting than using ". See also Chapter 5. , comma operator. The comma operator links together a series of arithmetic operations. All are evaluated, but only the last one is returned. Chapter 3. Special Characters 8

Advanced BashScripting Guide

let "t2 = ((a = 9, 15 / 3))" # Set "a" and calculate "t2".

\ escape. [backslash] \X "escapes" the character X. This has the effect of "quoting" X, equivalent to 'X'. The \ may be used to quote " and ', so they are expressed literally. See Chapter 5 for an indepth explanation of escaped characters. / Filename path separator. [forward slash] Separates the components of a filename (as in /home/bozo/projects/Makefile). This is also the division arithmetic operator. ` command substitution. [backticks] `command` makes available the output of command for setting a variable. This is also known as backticks or backquotes. : null command. [colon] This is the shell equivalent of a "NOP" (no op, a donothing operation). It may be considered a synonym for the shell builtin true. The ":" command is a itself a Bash builtin, and its exit status is "true" (0).
: echo $?

# 0

Endless loop:
while : do operation1 operation2 ... operationn done # Same as: # while true # do # ... # done

Placeholder in if/then test:

if condition then : # Do nothing and branch ahead else takesomeaction fi

Provide a placeholder where a binary operation is expected, see Example 82 and default parameters.
: ${username=`whoami`} # ${username=`whoami`} #

without the leading : gives an error unless "username" is a command or builtin...

Provide a placeholder where a command is expected in a here document. See Example 1710. Chapter 3. Special Characters 9

Advanced BashScripting Guide Evaluate string of variables using parameter substitution (as in Example 913).
: ${HOSTNAME?} ${USER?} ${MAIL?} #Prints error message if one or more of essential environmental variables not set.

Variable expansion / substring replacement. In combination with the > redirection operator, truncates a file to zero length, without changing its permissions. If the file did not previously exist, creates it.
: > data.xxx # File "data.xxx" now empty.

# Same effect as cat /dev/null >data.xxx # However, this does not fork a new process, since ":" is a builtin.

See also Example 1211. In combination with the >> redirection operator, updates a file access/modification time (: >> new_file). If the file did not previously exist, creates it. This is equivalent to touch. This applies to regular files, not pipes, symlinks, and certain special files. May be used to begin a comment line, although this is not recommended. Using # for a comment turns off error checking for the remainder of that line, so almost anything may be appear in a comment. However, this is not the case with :.
: This is a comment that generates an error, ( if [ $x eq 3] ).

The ":" also serves as a field separator, in /etc/passwd, and in the $PATH variable.
bash$ echo $PATH /usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/sbin:/usr/sbin:/usr/games

! reverse (or negate) the sense of a test or exit status. The ! operator inverts the exit status of the command to which it is applied (see Example 62). It also inverts the meaning of a test operator. This can, for example, change the sense of "equal" ( = ) to "notequal" ( != ). The ! operator is a Bash keyword. In a different context, the ! also appears in indirect variable references. In yet another context, from the command line, the ! invokes the Bash history mechanism (see Appendix G). Note that within a script, the history mechanism is disabled. * wild card. [asterisk] The * character serves as a "wild card" for filename expansion in globbing. By itself, it matches every filename in a given directory.
bash$ echo * absbook.sgml adddrive.sh agram.sh alias.sh

Chapter 3. Special Characters

10

Advanced BashScripting Guide The * also represents any number (or zero) characters in a regular expression. * arithmetic operator. In the context of arithmetic operations, the * denotes multiplication. A double asterisk, **, is the exponentiation operator. ? test operator. Within certain expressions, the ? indicates a test for a condition. In a double parentheses construct, the ? serves as a Cstyle trinary operator. See Example 928. In a parameter substitution expression, the ? tests whether a variable has been set. ? wild card. The ? character serves as a singlecharacter "wild card" for filename expansion in globbing, as well as representing one character in an extended regular expression. $ Variable substitution.
var1=5 var2=23skidoo echo $var1 echo $var2 # 5 # 23skidoo

A $ prefixing a variable name indicates the value the variable holds. $ endofline. In a regular expression, a "$" addresses the end of a line of text. ${} Parameter substitution. $*, $@ positional parameters. $? exit status variable. The $? variable holds the exit status of a command, a function, or of the script itself. $$ process id variable. The $$ variable holds the process id of the script in which it appears. () command group.
(a=hello; echo $a)

A listing of commands within parentheses starts a subshell. Variables inside parentheses, within the subshell, are not visible to the rest of the script. The parent process, the script, cannot read variables created in the child process, the subshell.
a=123 ( a=321; ) echo "a = $a" # a = 123 # "a" within parentheses acts like a local variable.

Chapter 3. Special Characters

11

Advanced BashScripting Guide array initialization.

Array=(element1 element2 element3)

{xxx,yyy,zzz,...} Brace expansion.

grep Linux file*.{txt,htm*} # Finds all instances of the word "Linux" # in the files "fileA.txt", "file2.txt", "fileR.html", "file87.htm", etc.

A command may act upon a commaseparated list of file specs within braces. [11] Filename expansion (globbing) applies to the file specs between the braces. No spaces allowed within the braces unless the spaces are quoted or escaped. echo {file1,file2}\ :{\ A," B",' C'} file1 : A file1 : B file1 : C file2 : A file2 : B file2 : C {} Block of code. [curly brackets] Also referred to as an "inline group", this construct, in effect, creates an anonymous function. However, unlike a function, the variables in a code block remain visible to the remainder of the script.
bash$ { local a; a=123; } bash: local: can only be used in a function

a=123 { a=321; } echo "a = $a" # Thanks, S.C.

# a = 321

(value inside code block)

The code block enclosed in braces may have I/O redirected to and from it.

Example 31. Code blocks and I/O redirection

#!/bin/bash # Reading lines in /etc/fstab. File=/etc/fstab { read line1 read line2 } < $File echo "First line in $File is:" echo "$line1" echo echo "Second line in $File is:"

Chapter 3. Special Characters

12

Advanced BashScripting Guide

echo "$line2" exit 0

Example 32. Saving the results of a code block to a file

#!/bin/bash # rpmcheck.sh # Queries an rpm file for description, listing, and whether it can be installed. # Saves output to a file. # # This script illustrates using a code block. SUCCESS=0 E_NOARGS=65 if [ z "$1" ] then echo "Usage: `basename $0` rpmfile" exit $E_NOARGS fi { echo echo "Archive Description:" rpm qpi $1 # Query description. echo echo "Archive Listing:" rpm qpl $1 # Query listing. echo rpm i test $1 # Query whether rpm file can be installed. if [ "$?" eq $SUCCESS ] then echo "$1 can be installed." else echo "$1 cannot be installed." fi echo } > "$1.test" # Redirects output of everything in block to file. echo "Results of rpm test in file $1.test" # See rpm man page for explanation of options. exit 0

Unlike a command group within (parentheses), as above, a code block enclosed by {braces} will not normally launch a subshell. [12] {} \; pathname. Mostly used in find constructs. This is not a shell builtin. The ";" ends the exec option of a find command sequence. It needs to be escaped to protect it from interpretation by the shell. [] test.

Chapter 3. Special Characters

13

Advanced BashScripting Guide Test expression between [ ]. Note that [ is part of the shell builtin test (and a synonym for it), not a link to the external command /usr/bin/test. [[ ]] test. Test expression between [[ ]] (shell keyword). See the discussion on the [[ ... ]] construct. [] array element. In the context of an array, brackets set off the numbering of each element of that array.
Array[1]=slot_1 echo ${Array[1]}

[] range of characters. As part of a regular expression, brackets delineate a range of characters to match. (( )) integer expansion. Expand and evaluate integer expression between (( )). See the discussion on the (( ... )) construct. > &> >& >> < redirection. scriptname >filename redirects the output of scriptname to file filename. Overwrite filename if it already exists. command &>filename redirects both the stdout and the stderr of command to filename. command >&2 redirects stdout of command to stderr. scriptname >>filename appends the output of scriptname to file filename. If filename does not already exist, it will be created. process substitution. (command)> <(command) In a different context, the "<" and ">" characters act as string comparison operators. In yet another context, the "<" and ">" characters act as integer comparison operators. See also Example 126. << redirection used in a here document. <, > Chapter 3. Special Characters 14

Advanced BashScripting Guide ASCII comparison.

veg1=carrots veg2=tomatoes if [[ "$veg1" < "$veg2" ]] then echo "Although $veg1 precede $veg2 in the dictionary," echo "this implies nothing about my culinary preferences." else echo "What kind of dictionary are you using, anyhow?" fi

\<, \> word boundary in a regular expression. bash$ grep '\<the\>' textfile | pipe. Passes the output of previous command to the input of the next one, or to the shell. This is a method of chaining commands together.
echo ls l | sh # Passes the output of "echo ls l" to the shell, #+ with the same result as a simple "ls l".

cat *.lst | sort | uniq # Merges and sorts all ".lst" files, then deletes duplicate lines.

A pipe, as a classic method of interprocess communication, sends the stdout of one process to the stdin of another. In a typical case, a command, such as cat or echo, pipes a stream of data to a "filter" (a command that transforms its input) for processing. cat $filename | grep $search_word The output of a command or commands may be piped to a script.
#!/bin/bash # uppercase.sh : Changes input to uppercase. tr 'az' 'AZ' # Letter ranges must be quoted #+ to prevent filename generation from singleletter filenames. exit 0

Now, let us pipe the output of ls l to this script.

bash$ ls l | ./uppercase.sh RWRWR 1 BOZO BOZO RWRWR 1 BOZO BOZO RWRR 1 BOZO BOZO

109 APR 7 19:49 1.TXT 109 APR 14 16:48 2.TXT 725 APR 20 20:56 DATAFILE

Chapter 3. Special Characters

15

Advanced BashScripting Guide The stdout of each process in a pipe must be read as the stdin of the next. If this is not the case, the data stream will block, and the pipe will not behave as expected.
cat file1 file2 | ls l | sort # The output from "cat file1 file2" disappears.

A pipe runs as a child process, and therefore cannot alter script variables.
variable="initial_value" echo "new_value" | read variable echo "variable = $variable" # variable = initial_value

If one of the commands in the pipe aborts, this prematurely terminates execution of the pipe. Called a broken pipe, this condition sends a SIGPIPE signal. >| force redirection (even if the noclobber option is set). This will forcibly overwrite an existing file. || OR logical operator. In a test construct, the || operator causes a return of 0 (success) if either of the linked test conditions is true. & Run job in background. A command followed by an & will run in the background.
bash$ sleep 10 & [1] 850 [1]+ Done

sleep 10

Within a script, commands and even loops may run in the background.

Example 33. Running a loop in the background

#!/bin/bash # backgroundloop.sh for i in 1 2 3 4 5 6 7 8 9 10 # First loop. do echo n "$i " done & # Run this loop in background. # Will sometimes execute after second loop. echo # This 'echo' sometimes will not display. # Second loop.

for i in 11 12 13 14 15 16 17 18 19 20 do echo n "$i " done echo

# This 'echo' sometimes will not display.

# ====================================================== # The expected output from the script: # 1 2 3 4 5 6 7 8 9 10 # 11 12 13 14 15 16 17 18 19 20

Chapter 3. Special Characters

16

Advanced BashScripting Guide

# # # # Sometimes, though, you get: 11 12 13 14 15 16 17 18 19 20 1 2 3 4 5 6 7 8 9 10 bozo $ (The second 'echo' doesn't execute. Why?)

# Occasionally also: # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 # (The first 'echo' doesn't execute. Why?) # Very rarely something like: # 11 12 13 1 2 3 4 5 6 7 8 9 10 14 15 16 17 18 19 20 # The foreground loop preempts the background one. exit 0

A command run in the background within a script may cause the script to hang, waiting for a keystroke. Fortunately, there is a remedy for this. && AND logical operator. In a test construct, the && operator causes a return of 0 (success) only if both the linked test conditions are true. option, prefix. Option flag for a command or filter. Prefix for an operator. COMMAND [Option1][Option2][...] ls al sort dfu $filename set $variable
if [ $file1 ot $file2 ] then echo "File $file1 is older than $file2." fi if [ "$a" eq "$b" ] then echo "$a is equal to $b." fi if [ "$c" eq 24 a "$d" eq 47 ] then echo "$c equals 24 and $d equals 47." fi

redirection from/to stdin or stdout. [dash]

(cd /source/directory && tar cf . ) | (cd /dest/directory && tar xpvf ) # Move entire file tree from one directory to another # [courtesy Alan Cox <[email protected]>, with a minor change] # 1) cd /source/directory # 2) && # 3) tar cf . # #

Source directory, where the files to be moved are. "Andlist": if the 'cd' operation successful, then execute the The 'c' option 'tar' archiving command creates a new archive, the 'f' (file) option, followed by '' designates the target and do it in current directory tree ('.').

Chapter 3. Special Characters

17

Advanced BashScripting Guide

# # # # # # # # # # 4) 5) 6) 7) 8) | ( ... ) cd /dest/directory && tar xpvf

Piped to... a subshell Change to the destination directory. "Andlist", as above Unarchive ('x'), preserve ownership and file permissions ('p' and send verbose messages to stdout ('v'), reading data from stdin ('f' followed by ''). Note that 'x' is a command, and 'p', 'v', 'f' are options.

Whew!

# More elegant than, but equivalent to: # cd sourcedirectory # tar cf . | (cd ../targetdirectory; tar xzf ) # # cp a /source/directory /dest also has same effect. bunzip2 linux2.4.3.tar.bz2 | tar xvf # uncompress tar file | then pass it to "tar" # If "tar" has not been patched to handle "bunzip2", # this needs to be done in two discrete steps, using a pipe. # The purpose of the exercise is to unarchive "bzipped" kernel source.

Note that in this context the "" is not itself a Bash operator, but rather an option recognized by certain UNIX utilities that write to stdout, such as tar, cat, etc.
bash$ echo "whatever" | cat whatever

Where a filename is expected, redirects output to stdout (sometimes seen with tar cf), or accepts input from stdin, rather than from a file. This is a method of using a fileoriented utility as a filter in a pipe.
bash$ file Usage: file [bciknvzL] [f namefile] [m magicfiles] file...

By itself on the command line, file fails with an error message. Add a "" for a more useful result. This causes the shell to await user input.
bash$ file abc standard input:

ASCII text

bash$ file #!/bin/bash standard input:

BourneAgain shell script text executable

Now the command accepts input from stdin and analyzes it.

Chapter 3. Special Characters

18

Advanced BashScripting Guide The "" can be used to pipe stdout to other commands. This permits such stunts as prepending lines to a file. Using diff to compare a file with a section of another: grep Linux file1 | diff file2 Finally, a realworld example using with tar.

Example 34. Backup of all files changed in last day

#!/bin/bash # Backs up all files in current directory modified within last 24 hours #+ in a "tarball" (tarred and gzipped file). BACKUPFILE=backup archive=${1:$BACKUPFILE} # If no backuparchive filename specified on command line, #+ it will default to "backup.tar.gz." tar cvf `find . mtime 1 type f print` > $archive.tar gzip $archive.tar echo "Directory $PWD backed up in archive file \"$archive.tar.gz\"."

# Stephane Chazelas points out that the above code will fail #+ if there are too many files found #+ or if any filenames contain blank characters. # He suggests the following alternatives: # # find . mtime 1 type f print0 | xargs 0 tar rvf "$archive.tar" # using the GNU version of "find".

# find . mtime 1 type f exec tar rvf "$archive.tar" '{}' \; # portable to other UNIX flavors, but much slower. #

exit 0

Filenames beginning with "" may cause problems when coupled with the "" redirection operator. A script should check for this and add an appropriate prefix to such filenames, for example ./FILENAME, $PWD/FILENAME, or $PATHNAME/FILENAME. If the value of a variable begins with a , this may likewise create problems.
var="n" echo $var # Has the effect of "echo n", and outputs nothing.

previous working directory. [dash] cd changes to the previous working directory. This uses the Chapter 3. Special Characters 19

Advanced BashScripting Guide $OLDPWD environmental variable. Do not confuse the "" used in this sense with the "" redirection operator just discussed. The interpretation of the "" depends on the context in which it appears. Minus. Minus sign in an arithmetic operation. = Equals. Assignment operator
a=28 echo $a

# 28

In a different context, the "=" is a string comparison operator. + Plus. Addition arithmetic operator. In a different context, the + is a Regular Expression operator. + Option. Option flag for a command or filter. Certain commands and builtins use the + to enable certain options and the to disable them. % modulo. Modulo (remainder of a division) arithmetic operation. In a different context, the % is a pattern matching operator. ~ home directory. [tilde] This corresponds to the $HOME internal variable. ~bozo is bozo's home directory, and ls ~bozo lists the contents of it. ~/ is the current user's home directory, and ls ~/ lists the contents of it.
bash$ echo ~bozo /home/bozo bash$ echo ~ /home/bozo bash$ echo ~/ /home/bozo/ bash$ echo ~: /home/bozo: bash$ echo ~nonexistentuser ~nonexistentuser

~+ current working directory. This corresponds to the $PWD internal variable. ~ previous working directory. This corresponds to the $OLDPWD internal variable. ^ beginningofline. In a regular expression, a "^" addresses the beginning of a line of text. Control Characters

Chapter 3. Special Characters

20

Advanced BashScripting Guide change the behavior of the terminal or text display. A control character is a CONTROL + key combination. CtlC Terminate a foreground job. CtlD Log out from a shell (similar to exit). "EOF" (end of file). This also terminates input from stdin. CtlG "BEL" (beep). CtlH Backspace.
#!/bin/bash # Embedding CtlH in a string. a="^H^H" echo "abcdef" echo n "abcdef$a " # Space at end ^ echo n "abcdef$a" # No space at end echo; echo # Two CtlH's (backspaces). # abcdef # abcd f ^ Backspaces twice. # abcdef Doesn't backspace (why?). # Results may not be quite as expected.

CtlJ Carriage return. CtlL Formfeed (clear the terminal screen). This has the same effect as the clear command. CtlM Newline. CtlU Erase a line of input. CtlZ Pause a foreground job. Whitespace functions as a separator, separating commands or variables. Whitespace consists of either spaces, tabs, blank lines, or any combination thereof. In some contexts, such as variable assignment, whitespace is not permitted, and results in a syntax error. Blank lines have no effect on the action of a script, and are therefore useful for visually separating Chapter 3. Special Characters 21

Advanced BashScripting Guide functional sections. $IFS, the special variable separating fields of input to certain commands, defaults to whitespace.

Chapter 3. Special Characters

22

Chapter 4. Introduction to Variables and Parameters

Variables are at the heart of every programming and scripting language. They appear in arithmetic operations and manipulation of quantities, string parsing, and are indispensable for working in the abstract with symbols tokens that represent something else. A variable is nothing more than a location or set of locations in computer memory holding an item of data.

4.1. Variable Substitution

The name of a variable is a placeholder for its value, the data it holds. Referencing its value is called variable substitution. $ Let us carefully distinguish between the name of a variable and its value. If variable1 is the name of a variable, then $variable1 is a reference to its value, the data item it contains. The only time a variable appears "naked", without the $ prefix, is when declared or assigned, when unset, when exported, or in the special case of a variable representing a signal (see Example 305). Assignment may be with an = (as in var1=27), in a read statement, and at the head of a loop (for var2 in 1 2 3). Enclosing a referenced value in double quotes (" ") does not interfere with variable substitution. This is called partial quoting, sometimes referred to as "weak quoting". Using single quotes (' ') causes the variable name to be used literally, and no substitution will take place. This is full quoting, sometimes referred to as "strong quoting". See Chapter 5 for a detailed discussion. Note that $variable is actually a simplified alternate form of ${variable}. In contexts where the $variable syntax causes an error, the longer form may work (see Section 9.3, below).

Example 41. Variable assignment and substitution

#!/bin/bash # Variables: assignment and substitution a=375 hello=$a # # No space permitted on either side of = sign when initializing variables. # If "VARIABLE =value", #+ script tries to run "VARIABLE" command with one argument, "=value". # If "VARIABLE= value", #+ script tries to run "value" command with #+ the environmental variable "VARIABLE" set to "". #

echo hello

# Not a variable reference, just the string "hello".

Chapter 4. Introduction to Variables and Parameters

23

Advanced BashScripting Guide

echo $hello echo ${hello} # Identical to above. echo "$hello" echo "${hello}" echo hello="A B C D" echo $hello # A B C D echo "$hello" # A B C D # As you see, echo $hello and echo "$hello" # Quoting a variable preserves whitespace. echo echo '$hello' # $hello # Variable referencing disabled by single quotes, #+ which causes the "$" to be interpreted literally. # Notice the effect of different types of quoting.

give different results.

hello= # Setting it to a null value. echo "\$hello (null value) = $hello" # Note that setting a variable to a null value is not the same as #+ unsetting it, although the end result is the same (see below). # # It is permissible to set multiple variables on the same line, #+ if separated by white space. # Caution, this may reduce legibility, and may not be portable. var1=variable1 var2=variable2 var3=variable3 echo echo "var1=$var1 var2=$var2 var3=$var3" # May cause problems with older versions of "sh". # echo; echo numbers="one two three" other_numbers="1 2 3" # If whitespace within a variable, then quotes necessary. echo "numbers = $numbers" echo "other_numbers = $other_numbers" # other_numbers = 1 2 3 echo echo "uninitialized_variable = $uninitialized_variable" # Uninitialized variable has null value (no value at all). uninitialized_variable= # Declaring, but not initializing it #+ (same as setting it to a null value, as above). echo "uninitialized_variable = $uninitialized_variable" # It still has a null value. uninitialized_variable=23 # Set it. unset uninitialized_variable # Unset it. echo "uninitialized_variable = $uninitialized_variable" # It still has a null value.

Chapter 4. Introduction to Variables and Parameters

24

Advanced BashScripting Guide

echo exit 0

An uninitialized variable has a "null" value no assigned value at all (not zero!). Using a variable before assigning a value to it will usually cause problems. It is nevertheless possible to perform arithmetic operations on an uninitialized variable.
echo "$uninitialized" let "uninitialized += 5" echo "$uninitialized" # # #+ # # (blank line) # Add 5 to it. # 5

Conclusion: An uninitialized variable has no value, however it acts as if it were 0 in an arithmetic operation. This is undocumented (and probably nonportable) behavior.

See also Example 1119.

4.2. Variable Assignment

= the assignment operator (no space before & after) Do not confuse this with = and eq, which test, rather than assign! Note that = can be either an assignment or a test operator, depending on context.

Example 42. Plain Variable Assignment

#!/bin/bash # Naked variables echo # When is a variable "naked", i.e., lacking the '$' in front? # When it is being assigned, rather than referenced. # Assignment a=879 echo "The value of \"a\" is $a." # Assignment using 'let' let a=16+5 echo "The value of \"a\" is now $a." echo # In a 'for' loop (really, a type of disguised assignment) echo n "Values of \"a\" in the loop are: " for a in 7 8 9 11

Chapter 4. Introduction to Variables and Parameters

25

Advanced BashScripting Guide

do echo n "$a " done echo echo # In echo read echo echo exit 0 a 'read' statement (also a type of assignment) n "Enter \"a\" " a "The value of \"a\" is now $a."

Example 43. Variable Assignment, plain and fancy

#!/bin/bash a=23 echo $a b=$a echo $b # Simple case

# Now, getting a little bit fancier (command substitution). a=`echo Hello!` # Assigns result of 'echo' command to 'a' echo $a # Note that using an exclamation mark (!) in command substitution #+ will not work from the command line, #+ since this triggers the Bash "history mechanism." # Within a script, however, the history functions are disabled. a=`ls l` echo $a echo echo "$a" # Assigns result of 'ls l' command to 'a' # Unquoted, however, removes tabs and newlines. # The quoted variable preserves whitespace. # (See the chapter on "Quoting.")

exit 0

Variable assignment using the $(...) mechanism (a newer method than backquotes)
# From /etc/rc.d/rc.local R=$(cat /etc/redhatrelease) arch=$(uname m)

4.3. Bash Variables Are Untyped

Unlike many other programming languages, Bash does not segregate its variables by "type". Essentially, Bash variables are character strings, but, depending on context, Bash permits integer operations and comparisons on variables. The determining factor is whether the value of a variable contains only digits.

Chapter 4. Introduction to Variables and Parameters

26

Advanced BashScripting Guide Example 44. Integer or string?

#!/bin/bash # intorstring.sh: Integer or string? a=2334 let "a += 1" echo "a = $a " echo # Integer. # a = 2335 # Integer, still.

b=${a/23/BB} echo "b = $b" declare i b echo "b = $b" let "b += 1" echo "b = $b" echo c=BB34 echo "c = $c" d=${c/BB/23} echo "d = $d" let "d += 1" echo "d = $d" echo

# # # # #

Substitute "BB" for "23". This transforms $b into a string. b = BB35 Declaring it an integer doesn't help. b = BB35

# BB35 + 1 = # b = 1

# # # # # #

c = BB34 Substitute "23" for "BB". This makes $d an integer. d = 2334 2334 + 1 = d = 2335

# What about null variables? e="" echo "e = $e" # e = let "e += 1" # Arithmetic operations allowed on a null variable? echo "e = $e" # e = 1 echo # Null variable transformed into an integer. # What about undeclared variables? echo "f = $f" # f = let "f += 1" # Arithmetic operations allowed? echo "f = $f" # f = 1 echo # Undeclared variable transformed into an integer.

# Variables in Bash are essentially untyped. exit 0

Untyped variables are both a blessing and a curse. They permit more flexibility in scripting (enough rope to hang yourself!) and make it easier to grind out lines of code. However, they permit errors to creep in and encourage sloppy programming habits. The burden is on the programmer to keep track of what type the script variables are. Bash will not do it for you.

Chapter 4. Introduction to Variables and Parameters

27

Advanced BashScripting Guide

4.4. Special Variable Types

local variables variables visible only within a code block or function (see also local variables in functions) environmental variables variables that affect the behavior of the shell and user interface In a more general context, each process has an "environment", that is, a group of variables that hold information that the process may reference. In this sense, the shell behaves like any other process. Every time a shell starts, it creates shell variables that correspond to its own environmental variables. Updating or adding new environmental variables causes the shell to update its environment, and all the shell's child processes (the commands it executes) inherit this environment. The space allotted to the environment is limited. Creating too many environmental variables or ones that use up excessive space may cause problems.
bash$ eval "`seq 10000 | sed e 's/.*/export var&=ZZZZZZZZZZZZZZ/'`" bash$ du bash: /usr/bin/du: Argument list too long

(Thank you, S. C. for the clarification, and for providing the above example.) If a script sets environmental variables, they need to be "exported", that is, reported to the environment local to the script. This is the function of the export command.

A script can export variables only to child processes, that is, only to commands or processes which that particular script initiates. A script invoked from the command line cannot export variables back to the command line environment. Child processes cannot export variables back to the parent processes that spawned them. positional parameters arguments passed to the script from the command line $0, $1, $2, $3... $0 is the name of the script itself, $1 is the first argument, $2 the second, $3 the third, and so forth. [13] After $9, the arguments must be enclosed in brackets, for example, ${10}, ${11}, ${12}. The special variables $* and $@ denote all the positional parameters.

Example 45. Positional Parameters

#!/bin/bash # Call this script with at least 10 parameters, for example # ./scriptname 1 2 3 4 5 6 7 8 9 10

Chapter 4. Introduction to Variables and Parameters

28

Advanced BashScripting Guide

MINPARAMS=10 echo echo "The name of this script is \"$0\"." # Adds ./ for current directory echo "The name of this script is \"`basename $0`\"." # Strips out path name info (see 'basename') echo if [ n "$1" ] then echo "Parameter #1 is $1" fi if [ n "$2" ] then echo "Parameter #2 is $2" fi if [ n "$3" ] then echo "Parameter #3 is $3" fi # ... # Tested variable is quoted. # Need quotes to escape #

if [ n "${10}" ] # Parameters > $9 must be enclosed in {brackets}. then echo "Parameter #10 is ${10}" fi echo "" echo "All the commandline parameters are: "$*"" if [ $# lt "$MINPARAMS" ] then echo echo "Give me at least $MINPARAMS commandline arguments!" fi echo exit 0

The bracket notation for positional parameters leads to a fairly simple way of referencing the last argument passed to a script on the command line. This also requires indirect referencing.
args=$# lastarg=${!args} # Number of args passed. # Note that lastarg=${!$#} doesn't work.

Some scripts can perform different operations, depending on which name they are invoked with. For this to work, the script needs to check $0, the name it was invoked by. There must also exist symbolic links to all the alternate names of the script. If a script expects a command line parameter but is invoked without one, this may cause a null variable assignment, generally an undesirable result. One way to prevent Chapter 4. Introduction to Variables and Parameters 29

Advanced BashScripting Guide this is to append an extra character to both sides of the assignment statement using the expected positional parameter.
variable1_=$1_ # This will prevent an error, even if positional parameter is absent. critical_argument01=$variable1_ # The extra character can be stripped off later, if desired, like so. variable1=${variable1_/_/} # Side effects only if $variable1_ begins with "_". # This uses one of the parameter substitution templates discussed in Chapter 9. # Leaving out the replacement pattern results in a deletion. # A more straightforward way of dealing with this is #+ to simply test whether expected positional parameters have been passed. if [ z $1 ] then exit $POS_PARAMS_MISSING fi

Example 46. wh, whois domain name lookup

#!/bin/bash # Does a 'whois domainname' lookup on any of 3 alternate servers: # ripe.net, cw.net, radb.net # Place this script, named 'wh' in /usr/local/bin # # # # Requires symbolic links: ln s /usr/local/bin/wh /usr/local/bin/whripe ln s /usr/local/bin/wh /usr/local/bin/whcw ln s /usr/local/bin/wh /usr/local/bin/whradb

if [ z "$1" ] then echo "Usage: `basename $0` [domainname]" exit 65 fi case `basename $0` in # Checks script name and calls proper server "wh" ) whois [email protected];; "whripe") whois [email protected];; "whradb") whois [email protected];; "whcw" ) whois [email protected];; * ) echo "Usage: `basename $0` [domainname]";; esac exit 0

Chapter 4. Introduction to Variables and Parameters

30

Advanced BashScripting Guide The shift command reassigns the positional parameters, in effect shifting them to the left one notch. $1 < $2, $2 < $3, $3 < $4, etc. The old $1 disappears, but $0 (the script name) does not change. If you use a large number of positional parameters to a script, shift lets you access those past 10, although {bracket} notation also permits this.

Example 47. Using shift

#!/bin/bash # Using 'shift' to step through all the positional parameters. # Name this script something like shft, #+ and invoke it with some parameters, for example # ./shft a b c def 23 skidoo until [ z "$1" ] do echo n "$1 " shift done echo exit 0 # Until all parameters used up...

# Extra line feed.

The shift command also works on parameters passed to a function. See Example 3410.

Chapter 4. Introduction to Variables and Parameters

31

Chapter 5. Quoting
Quoting means just that, bracketing a string in quotes. This has the effect of protecting special characters in the string from reinterpretation or expansion by the shell or shell script. (A character is "special" if it has an interpretation other than its literal meaning, such as the wild card character, *.)
bash$ ls l [Vv]* rwrwr 1 bozo bozo rwrwr 1 bozo bozo rwrwr 1 bozo bozo

324 Apr 2 15:05 VIEWDATA.BAT 507 May 4 14:25 vartrace.sh 539 Apr 14 17:11 viewdata.sh

bash$ ls l '[Vv]*' ls: [Vv]*: No such file or directory

Certain programs and utilities can still reinterpret or expand special characters in a quoted string. This is an important use of quoting, protecting a commandline parameter from the shell, but still letting the calling program expand it.
bash$ grep '[Ff]irst' *.txt file1.txt:This is the first line of file1.txt. file2.txt:This is the First line of file2.txt.

Note that the unquoted grep [Ff]irst *.txt works under the Bash shell, but not under tcsh. When referencing a variable, it is generally advisable to enclose it in double quotes (" "). This preserves all special characters within the variable name, except $, ` (backquote), and \ (escape). [14] Keeping $ as a special character within double quotes permits referencing a quoted variable ("$variable"), that is, replacing the variable with its value (see Example 41, above). Use double quotes to prevent word splitting. [15] An argument enclosed in double quotes presents itself as a single word, even if it contains whitespace separators.
variable1="a variable containing five words" COMMAND This is $variable1 # Executes COMMAND with 7 arguments: # "This" "is" "a" "variable" "containing" "five" "words" COMMAND "This is $variable1" # Executes COMMAND with 1 argument: # "This is a variable containing five words"

variable2=""

# Empty. # Executes COMMAND with no arguments. # Executes COMMAND with 3 empty arguments. # Executes COMMAND with 1 argument (2 spaces).

COMMAND $variable2 $variable2 $variable2 COMMAND "$variable2" "$variable2" "$variable2" COMMAND "$variable2 $variable2 $variable2" # Thanks, S.C.

Enclosing the arguments to an echo statement in double quotes is necessary only when word splitting is an issue.

Chapter 5. Quoting

32

Advanced BashScripting Guide Example 51. Echoing Weird Variables

#!/bin/bash # weirdvars.sh: Echoing weird variables. var="'(]\\{}\$\"" echo $var # '(]\{}$" echo "$var" # '(]\{}$" echo IFS='\' echo $var echo "$var"

Doesn't make a difference.

# '(] {}$" # '(]\{}$"

\ converted to space.

# Examples above supplied by S.C. exit 0

Single quotes (' ') operate similarly to double quotes, but do not permit referencing variables, since the special meaning of $ is turned off. Within single quotes, every special character except ' gets interpreted literally. Consider single quotes ("full quoting") to be a stricter method of quoting than double quotes ("partial quoting"). Since even the escape character (\) gets a literal interpretation within single quotes, trying to enclose a single quote within single quotes will not yield the expected result.
echo "Why can't I write 's between single quotes" echo # The roundabout method. echo 'Why can'\''t I write '"'"'s between single quotes' # || || || # Three singlequoted strings, with escaped and quoted single quotes between. # This example courtesy of Stephane Chazelas.

Escaping is a method of quoting single characters. The escape (\) preceding a character tells the shell to interpret that character literally. With certain commands and utilities, such as echo and sed, escaping a character may have the opposite effect it can toggle on a special meaning for that character. Special meanings of certain escaped characters used with echo and sed \n means newline \r means return \t means tab \v means vertical tab Chapter 5. Quoting 33

Advanced BashScripting Guide \b means backspace \a means "alert" (beep or flash) \0xx translates to the octal ASCII equivalent of 0xx

Example 52. Escaped Characters

#!/bin/bash # escaped.sh: escaped characters echo; echo echo "\v\v\v\v" # Prints \v\v\v\v literally. # Use the e option with 'echo' to print escaped characters. echo "=============" echo "VERTICAL TABS" echo e "\v\v\v\v" # Prints 4 vertical tabs. echo "==============" echo "QUOTATION MARK" echo e "\042" # Prints " (quote, octal ASCII character 42). echo "==============" # The $'\X' construct makes the e option unnecessary. echo; echo "NEWLINE AND BEEP" echo $'\n' # Newline. echo $'\a' # Alert (beep). echo "===============" echo "QUOTATION MARKS" # Version 2 and later of Bash permits using the $'\nnn' construct. # Note that in this case, '\nnn' is an octal value. echo $'\t \042 \t' # Quote (") framed by tabs. # It also works with hexadecimal values, in an $'\xhhh' construct. echo $'\t \x22 \t' # Quote (") framed by tabs. # Thank you, Greg Keraunen, for pointing this out. # Earlier Bash versions allowed '\x022'. echo "===============" echo

# Assigning ASCII characters to a variable. # quote=$'\042' # " assigned to a variable. echo "$quote This is a quoted string, $quote and this lies outside the quotes." echo # Concatenating ASCII chars in a variable. triple_underline=$'\137\137\137' # 137 is octal ASCII code for '_'. echo "$triple_underline UNDERLINE $triple_underline" echo ABC=$'\101\102\103\010' echo $ABC # 101, 102, 103 are octal A, B, C.

Chapter 5. Quoting

34

Advanced BashScripting Guide

echo; echo escape=$'\033' # 033 is octal for escape. echo "\"escape\" echoes as $escape" # no visible output. echo; echo exit 0

See Example 351 for another example of the $' ' string expansion construct. \" gives the quote its literal meaning
echo "Hello" echo "\"Hello\", he said." # Hello # "Hello", he said.

\$ gives the dollar sign its literal meaning (variable name following \$ will not be referenced)
echo "\$variable01" # results in $variable01

\\ gives the backslash its literal meaning

echo "\\" # Results in \

# Whereas . . . echo "\" # Invokes secondary prompt from the command line. # In a script, gives an error message.

The behavior of \ depends on whether it is itself escaped, quoted, or appearing within command substitution or a here document.
# # # # # # # # # # # # # # # # Simple escaping and quoting z \z \z \\z \z \z Command substitution z z \z \z \z \\z \z \z

echo echo echo echo echo echo

\z \\z '\z' '\\z' "\z" "\\z"

echo echo echo echo echo echo echo echo

`echo `echo `echo `echo `echo `echo `echo `echo

\z` \\z` \\\z` \\\\z` \\\\\\z` \\\\\\\z` "\z"` "\\z"`

# Here document cat <<EOF \z EOF

# \z

Chapter 5. Quoting

35

Advanced BashScripting Guide

cat <<EOF \\z EOF

# \z

# These examples supplied by Stephane Chazelas.

Elements of a string assigned to a variable may be escaped, but the escape character alone may not be assigned to a variable.
variable=\ echo "$variable" # Will not work gives an error message: # test.sh: : command not found # A "naked" escape cannot safely be assigned to a variable. # # What actually happens here is that the "\" escapes the newline and #+ the effect is variable=echo "$variable" #+ invalid variable assignment variable=\ 23skidoo echo "$variable"

# 23skidoo # This works, since the second line #+ is a valid variable assignment.

variable=\ # \^ escape followed by space echo "$variable" # space variable=\\ echo "$variable"

# \

variable=\\\ echo "$variable" # Will not work gives an error message: # test.sh: \: command not found # # First escape escapes second one, but the third one is left "naked", #+ with same result as first instance, above. variable=\\\\ echo "$variable"

# \\ # Second and fourth escapes escaped. # This is o.k.

Escaping a space can prevent word splitting in a command's argument list.

file_list="/bin/cat /bin/gzip /bin/more /usr/bin/less /usr/bin/emacs20.7" # List of files as argument(s) to a command. # Add two files to the list, and list all. ls l /usr/X11R6/bin/xsetroot /sbin/dump $file_list echo "" # What happens if we escape a couple of spaces? ls l /usr/X11R6/bin/xsetroot\ /sbin/dump\ $file_list # Error: the first three files concatenated into a single argument to 'ls l' # because the two escaped spaces prevent argument (word) splitting.

Chapter 5. Quoting

36

Advanced BashScripting Guide The escape also provides a means of writing a multiline command. Normally, each separate line constitutes a different command, but an escape at the end of a line escapes the newline character, and the command sequence continues on to the next line.
(cd /source/directory && tar cf . ) | \ (cd /dest/directory && tar xpvf ) # Repeating Alan Cox's directory tree copy command, # but split into two lines for increased legibility. # As an alternative: tar cf C /source/directory . | tar xpvf C /dest/directory # See note below. # (Thanks, Stephane Chazelas.)

If a script line ends with a |, a pipe character, then a \, an escape, is not strictly necessary. It is, however, good programming practice to always escape the end of a line of code that continues to the following line.
echo "foo bar" #foo #bar echo echo 'foo bar' # No difference yet. #foo #bar echo echo foo\ bar # Newline escaped. #foobar echo echo "foo\ bar" # Same here, as \ still interpreted as escape within weak quotes. #foobar echo echo 'foo\ bar' # Escape character \ taken literally because of strong quoting. #foo\ #bar # Examples suggested by Stephane Chazelas.

Chapter 5. Quoting

37

Chapter 6. Exit and Exit Status

...there are dark corners in the Bourne shell, and people use all of them. Chet Ramey The exit command may be used to terminate a script, just as in a C program. It can also return a value, which is available to the script's parent process. Every command returns an exit status (sometimes referred to as a return status ). A successful command returns a 0, while an unsuccessful one returns a nonzero value that usually may be interpreted as an error code. Wellbehaved UNIX commands, programs, and utilities return a 0 exit code upon successful completion, though there are some exceptions. Likewise, functions within a script and the script itself return an exit status. The last command executed in the function or script determines the exit status. Within a script, an exit nnn command may be used to deliver an nnn exit status to the shell (nnn must be a decimal number in the 0 255 range). When a script ends with an exit that has no parameter, the exit status of the script is the exit status of the last command executed in the script (not counting the exit).

$? reads the exit status of the last command executed. After a function returns, $? gives the exit status of the last command executed in the function. This is Bash's way of giving functions a "return value". After a script terminates, a $? from the command line gives the exit status of the script, that is, the last command executed in the script, which is, by convention, 0 on success or an integer in the range 1 255 on error.

Example 61. exit / exit status

#!/bin/bash echo hello echo $? # Exit status 0 returned because command executed successfully. lskdf echo $? echo exit 113 # Will return 113 to shell. # To verify this, type "echo $?" after script terminates. # Unrecognized command. # Nonzero exit status returned because command failed to execute.

# By convention, an 'exit 0' indicates success, #+ while a nonzero exit value means an error or anomalous condition.

$? is especially useful for testing the result of a command in a script (see Example 1227 and Example 1213). The !, the logical "not" qualifier, reverses the outcome of a test or command, and this affects its exit status. Example 62. Negating a condition using ! Chapter 6. Exit and Exit Status 38

Advanced BashScripting Guide

true # the "true" builtin. echo "exit status of \"true\" = $?" # 0

! true echo "exit status of \"! true\" = $?" # 1 # Note that the "!" needs a space. # !true leads to a "command not found" error # Thanks, S.C.

Certain exit status codes have reserved meanings and should not be userspecified in a script.

Chapter 6. Exit and Exit Status

39

Chapter 7. Tests
Every reasonably complete programming language can test for a condition, then act according to the result of the test. Bash has the test command, various bracket and parenthesis operators, and the if/then construct.

7.1. Test Constructs

An if/then construct tests whether the exit status of a list of commands is 0 (since 0 means "success" by UNIX convention), and if so, executes one or more commands. There exists a dedicated command called [ (left bracket special character). It is a synonym for test, and a builtin for efficiency reasons. This command considers its arguments as comparison expressions or file tests and returns an exit status corresponding to the result of the comparison (0 for true, 1 for false). With version 2.02, Bash introduced the [[ ... ]] extended test command, which performs comparisons in a manner more familiar to programmers from other languages. Note that [[ is a keyword, not a command. Bash sees [[ $a lt $b ]] as a single element, which returns an exit status. The (( ... )) and let ... constructs also return an exit status of 0 if the arithmetic expressions they evaluate expand to a nonzero value. These arithmetic expansion constructs may therefore be used to perform arithmetic comparisons.
let "1<2" returns 0 (as "1<2" expands to "1") (( 0 && 1 )) returns 1 (as "0 && 1" expands to "0")

An if can test any command, not just conditions enclosed within brackets.
if cmp a b &> /dev/null # Suppress output. then echo "Files a and b are identical." else echo "Files a and b differ." fi if grep q Bash file then echo "File contains at least one occurrence of Bash." fi if COMMAND_WHOSE_EXIT_STATUS_IS_0_UNLESS_ERROR_OCCURRED then echo "Command succeeded." else echo "Command failed." fi

An if/then construct can contain nested comparisons and tests.

if echo "Next *if* is part of the comparison for the first *if*." if [[ $comparison = "integer" ]] then (( a < b )) else [[ $a < $b ]] fi then echo '$a is less than $b' fi

Chapter 7. Tests

40

Advanced BashScripting Guide This detailed "iftest" explanation courtesy of Stephane Chazelas.

Example 71. What is truth?

#!/bin/bash echo echo "Testing \"0\"" if [ 0 ] # zero then echo "0 is true." else echo "0 is false." fi # 0 is true. echo echo "Testing \"1\"" if [ 1 ] # one then echo "1 is true." else echo "1 is false." fi # 1 is true. echo echo "Testing if [ 1 ] then echo "1 is else echo "1 is fi echo echo "Testing \"NULL\"" if [ ] # NULL (empty condition) then echo "NULL is true." else echo "NULL is false." fi # NULL is false. echo echo "Testing \"xyz\"" if [ xyz ] # string then echo "Random string is true." else echo "Random string is false." fi # Random string is true. echo echo "Testing \"\$xyz\"" if [ $xyz ] # Tests if $xyz is null, but... \"1\"" # minus one true." false." # 1 is true.

Chapter 7. Tests

41

Advanced BashScripting Guide

# it's only an uninitialized variable. then echo "Uninitialized variable is true." else echo "Uninitialized variable is false." fi # Uninitialized variable is false. echo echo "Testing \"n \$xyz\"" if [ n "$xyz" ] # More pedantically correct. then echo "Uninitialized variable is true." else echo "Uninitialized variable is false." fi # Uninitialized variable is false. echo

xyz=

# Initialized, but set to null value.

echo "Testing \"n \$xyz\"" if [ n "$xyz" ] then echo "Null variable is true." else echo "Null variable is false." fi # Null variable is false.

echo

# When is "false" true? echo "Testing \"false\"" if [ "false" ] # It seems that "false" is just a string. then echo "\"false\" is true." #+ and it tests true. else echo "\"false\" is false." fi # "false" is true. echo echo "Testing \"\$false\"" # Again, uninitialized variable. if [ "$false" ] then echo "\"\$false\" is true." else echo "\"\$false\" is false." fi # "$false" is false. # Now, we get the expected result.

echo exit 0

Exercise. Explain the behavior of Example 71, above. Chapter 7. Tests 42

Advanced BashScripting Guide

if [ conditiontrue ] then command 1 command 2 ... else # Optional (may be left out if not needed). # Adds default code block executing if original condition tests false. command 3 command 4 ... fi

When if and then are on same line in a condition test, a semicolon must terminate the if statement. Both if and then are keywords. Keywords (or commands) begin statements, and before a new statement on the same line begins, the old one must terminate.
if [ x "$filename" ]; then

Else if and elif elif elif is a contraction for else if. The effect is to nest an inner if/then construct within an outer one.
if [ condition1 ] then command1 command2 command3 elif [ condition2 ] # Same as else if then command4 command5 else defaultcommand fi

The if test conditiontrue construct is the exact equivalent of if [ conditiontrue ]. As it happens, the left bracket, [ , is a token which invokes the test command. The closing right bracket, ] , in an if/test should not therefore be strictly necessary, however newer versions of Bash require it. The test command is a Bash builtin which tests file types and compares strings. Therefore, in a Bash script, test does not call the external /usr/bin/test binary, which is part of the shutils package. Likewise, [ does not call /usr/bin/[, which is linked to /usr/bin/test.
bash$ type test test is a shell builtin bash$ type '[' [ is a shell builtin bash$ type '[[' [[ is a shell keyword bash$ type ']]' ]] is a shell keyword bash$ type ']' bash: type: ]: not found

Chapter 7. Tests

43

Advanced BashScripting Guide

Example 72. Equivalence of test, /usr/bin/test, [ ], and /usr/bin/[

#!/bin/bash echo if test z "$1" then echo "No commandline arguments." else echo "First commandline argument is $1." fi echo if /usr/bin/test z "$1" # Same result as "test" builtin". then echo "No commandline arguments." else echo "First commandline argument is $1." fi echo if [ z "$1" ] # Functionally identical to above code blocks. # if [ z "$1" should work, but... #+ Bash responds to a missing closebracket with an error message. then echo "No commandline arguments." else echo "First commandline argument is $1." fi echo if /usr/bin/[ z "$1" # Again, functionally identical to above. # if /usr/bin/[ z "$1" ] # Works, but gives an error message. then echo "No commandline arguments." else echo "First commandline argument is $1." fi echo exit 0

The [[ ]] construct is the more versatile Bash version of [ ]. This is the extended test command, adopted from ksh88. No filename expansion or word splitting takes place between [[ and ]], but there is parameter expansion and command substitution.
file=/etc/passwd

Chapter 7. Tests

44

Advanced BashScripting Guide

if [[ e $file ]] then echo "Password file exists." fi

Using the [[ ... ]] test construct, rather than [ ... ] can prevent many logic errors in scripts. For example, the &&, ||, <, and > operators work within a [[ ]] test, despite giving an error within a [ ] construct. Following an if, neither the test command nor the test brackets ( [ ] or [[ ]] ) are strictly necessary.
dir=/home/bozo if cd "$dir" 2>/dev/null; then echo "Now in $dir." else echo "Can't change to $dir." fi # "2>/dev/null" hides error message.

The "if COMMAND" construct returns the exit status of COMMAND. Similarly, a condition within test brackets may stand alone without an if, when used in combination with a list construct.
var1=20 var2=22 [ "$var1" ne "$var2" ] && echo "$var1 is not equal to $var2" home=/home/bozo [ d "$home" ] || echo "$home directory does not exist."

The (( )) construct expands and evaluates an arithmetic expression. If the expression evaluates as zero, it returns an exit status of 1, or "false". A nonzero expression returns an exit status of 0, or "true". This is in marked contrast to using the test and [ ] constructs previously discussed.

Example 73. Arithmetic Tests using (( ))

#!/bin/bash # Arithmetic tests. # The (( ... )) construct evaluates and tests numerical expressions. # Exit status opposite from [ ... ] construct! (( 0 )) echo "Exit status of \"(( 0 ))\" is $?." (( 1 )) echo "Exit status of \"(( 1 ))\" is $?." (( 5 > 4 )) echo "Exit status of \"(( 5 > 4 ))\" is $?." (( 5 > 9 )) echo "Exit status of \"(( 5 > 9 ))\" is $?."

# 1

# 0 # true # 0 # false # 1

Chapter 7. Tests

45

Advanced BashScripting Guide

(( 5 5 )) echo "Exit status of \"(( 5 5 ))\" is $?." (( 5 / 4 )) echo "Exit status of \"(( 5 / 4 ))\" is $?." (( 1 / 2 )) echo "Exit status of \"(( 1 / 2 ))\" is $?." # 0 # 1 # Division o.k. # 0 # Division result < 1. # Rounded off to 0. # 1 # Illegal division by 0. # 1

(( 1 / 0 )) 2>/dev/null echo "Exit status of \"(( 1 / 0 ))\" is $?." # What effect does the "2>/dev/null" have? # What would happen if it were removed? # Try removing it, then rerunning the script. exit 0

7.2. File test operators

Returns true if... e file exists f file is a regular file (not a directory or device file) s file is not zero size d file is a directory b file is a block device (floppy, cdrom, etc.) c file is a character device (keyboard, modem, sound card, etc.) p file is a pipe h file is a symbolic link L file is a symbolic link S file is a socket t file (descriptor) is associated with a terminal device This test option may be used to check whether the stdin ([ t 0 ]) or stdout ([ t 1 ]) in a given script is a terminal. r file has read permission (for the user running the test) w file has write permission (for the user running the test) x Chapter 7. Tests 46

Advanced BashScripting Guide file has execute permission (for the user running the test) g setgroupid (sgid) flag set on file or directory If a directory has the sgid flag set, then a file created within that directory belongs to the group that owns the directory, not necessarily to the group of the user who created the file. This may be useful for a directory shared by a workgroup. u setuserid (suid) flag set on file A binary owned by root with setuserid flag set runs with root privileges, even when an ordinary user invokes it. [16] This is useful for executables (such as pppd and cdrecord) that need to access system hardware. Lacking the suid flag, these binaries could not be invoked by a nonroot user.
rwsrxrt 1 root 178236 Oct 2 2000 /usr/sbin/pppd

A file with the suid flag set shows an s in its permissions. k sticky bit set Commonly known as the "sticky bit", the savetextmode flag is a special type of file permission. If a file has this flag set, that file will be kept in cache memory, for quicker access. [17] If set on a directory, it restricts write permission. Setting the sticky bit adds a t to the permissions on the file or directory listing.
drwxrwxrwt 7 root 1024 May 19 21:26 tmp/

If a user does not own a directory that has the sticky bit set, but has write permission in that directory, he can only delete files in it that he owns. This keeps users from inadvertently overwriting or deleting each other's files in a publicly accessible directory, such as /tmp. O you are owner of file G groupid of file same as yours N file modified since it was last read f1 nt f2 file f1 is newer than f2 f1 ot f2 file f1 is older than f2 f1 ef f2 files f1 and f2 are hard links to the same file ! "not" reverses the sense of the tests above (returns true if condition absent).

Example 74. Testing for broken links

Chapter 7. Tests

47

Advanced BashScripting Guide

#!/bin/bash # brokenlink.sh # Written by Lee bigelow <[email protected]> # Used with permission. #A pure shell script to find dead symlinks and output them quoted #so they can be fed to xargs and dealt with :) #eg. brokenlink.sh /somedir /someotherdir|xargs rm # #This, however, is a better method: # #find "somedir" type l print0|\ #xargs r0 file|\ #grep "broken symbolic"| #sed e 's/^\|: *broken symbolic.*$/"/g' # #but that wouldn't be pure bash, now would it. #Caution: beware the /proc file system and any circular links! ##############################################################

#If no args are passed to the script set directorys to search #to current directory. Otherwise set the directorys to search #to the agrs passed. #################### [ $# eq 0 ] && directorys=`pwd` || directorys=$@ #Setup the function linkchk to check the directory it is passed #for files that are links and don't exist, then print them quoted. #If one of the elements in the directory is a subdirectory then #send that send that subdirectory to the linkcheck function. ########## linkchk () { for element in $1/*; do [ h "$element" a ! e "$element" ] && echo \"$element\" [ d "$element" ] && linkchk $element # Of course, 'h' tests for symbolic link, 'd' for directory. done } #Send each arg that was passed to the script to the linkchk function #if it is a valid directoy. If not, then print the error message #and usage info. ################ for directory in $directorys; do if [ d $directory ] then linkchk $directory else echo "$directory is not a directory" echo "Usage: $0 dir1 dir2 ..." fi done exit 0

Example 291, Example 107, Example 103, Example 293, and Example A2 also illustrate uses of the file test operators.

Chapter 7. Tests

48

Advanced BashScripting Guide

7.3. Comparison operators (binary)

integer comparison eq is equal to if [ "$a" eq "$b" ] ne is not equal to if [ "$a" ne "$b" ] gt is greater than if [ "$a" gt "$b" ] ge is greater than or equal to if [ "$a" ge "$b" ] lt is less than if [ "$a" lt "$b" ] le is less than or equal to if [ "$a" le "$b" ] < is less than (within double parentheses) (("$a" < "$b")) <= is less than or equal to (within double parentheses) (("$a" <= "$b")) > is greater than (within double parentheses) (("$a" > "$b")) >= is greater than or equal to (within double parentheses) (("$a" >= "$b")) string comparison =

Chapter 7. Tests

49

Advanced BashScripting Guide is equal to if [ "$a" = "$b" ] == is equal to if [ "$a" == "$b" ] This is a synonym for =.
[[ $a == z* ]] [[ $a == "z*" ]] [ $a == z* ] [ "$a" == "z*" ] # Thanks, S.C. # true if $a starts with an "z" (pattern matching) # true if $a is equal to z* # file globbing and word splitting take place # true if $a is equal to z*

!= is not equal to if [ "$a" != "$b" ] This operator uses pattern matching within a [[ ... ]] construct. < is less than, in ASCII alphabetical order if [[ "$a" < "$b" ]] if [ "$a" \< "$b" ] Note that the "<" needs to be escaped within a [ ] construct. > is greater than, in ASCII alphabetical order if [[ "$a" > "$b" ]] if [ "$a" \> "$b" ] Note that the ">" needs to be escaped within a [ ] construct. See Example 266 for an application of this comparison operator. z string is "null", that is, has zero length n string is not "null". The n test absolutely requires that the string be quoted within the test brackets. Using an unquoted string with ! z, or even just the unquoted string alone within test brackets (see Example 76) normally works, however, this is an unsafe practice. Always quote a tested string. [18]

Chapter 7. Tests

50

Advanced BashScripting Guide Example 75. Arithmetic and string comparisons

#!/bin/bash a=4 b=5 # Here "a" and "b" can be treated either as integers or strings. # There is some blurring between the arithmetic and string comparisons, #+ since Bash variables are not strongly typed. # Bash permits integer operations and comparisons on variables #+ whose value consists of allinteger characters. # Caution advised. echo if [ "$a" ne "$b" ] then echo "$a is not equal to $b" echo "(arithmetic comparison)" fi echo if [ "$a" != "$b" ] then echo "$a is not equal to $b." echo "(string comparison)" # "4" != "5" # ASCII 52 != ASCII 53 fi # In this particular instance, both "ne" and "!=" work. echo exit 0

Example 76. Testing whether a string is null

#!/bin/bash # strtest.sh: Testing null strings and unquoted strings, # but not strings and sealing wax, not to mention cabbages and kings... # Using if [ ... ]

# If a string has not been initialized, it has no defined value. # This state is called "null" (not the same as zero). if [ n $string1 ] # $string1 has not been declared or initialized. then echo "String \"string1\" is not null." else echo "String \"string1\" is null." fi # Wrong result. # Shows $string1 as not null, although it was not initialized.

Chapter 7. Tests

51

Advanced BashScripting Guide

echo

# Lets try it again. if [ n "$string1" ] # This time, $string1 is quoted. then echo "String \"string1\" is not null." else echo "String \"string1\" is null." fi # Quote strings within test brackets!

echo

if [ $string1 ] # This time, $string1 stands naked. then echo "String \"string1\" is not null." else echo "String \"string1\" is null." fi # This works fine. # The [ ] test operator alone detects whether the string is null. # However it is good practice to quote it ("$string1"). # # As Stephane Chazelas points out, # if [ $string 1 ] has one argument, "]" # if [ "$string 1" ] has two arguments, the empty "$string1" and "]"

echo

string1=initialized if [ $string1 ] # Again, $string1 stands naked. then echo "String \"string1\" is not null." else echo "String \"string1\" is null." fi # Again, gives correct result. # Still, it is better to quote it ("$string1"), because...

string1="a = b" if [ $string1 ] # Again, $string1 stands naked. then echo "String \"string1\" is not null." else echo "String \"string1\" is null." fi # Not quoting "$string1" now gives wrong result! exit 0 # Also, thank you, Florian Wisser, for the "headsup".

Chapter 7. Tests

52

Advanced BashScripting Guide Example 77. zmost

#!/bin/bash #View gzipped files with 'most' NOARGS=65 NOTFOUND=66 NOTGZIP=67 if [ $# eq 0 ] # same effect as: if [ z "$1" ] # $1 can exist, but be empty: zmost "" arg2 arg3 then echo "Usage: `basename $0` filename" >&2 # Error message to stderr. exit $NOARGS # Returns 65 as exit status of script (error code). fi filename=$1 if [ ! f "$filename" ] # Quoting $filename allows for possible spaces. then echo "File $filename not found!" >&2 # Error message to stderr. exit $NOTFOUND fi if [ ${filename##*.} != "gz" ] # Using bracket in variable substitution. then echo "File $1 is not a gzipped file!" exit $NOTGZIP fi zcat $1 | most # Uses the file viewer 'most' (similar to 'less'). # Later versions of 'most' have file decompression capabilities. # May substitute 'more' or 'less', if desired.

exit $? # Script returns exit status of pipe. # Actually "exit $?" unnecessary, as the script will, in any case, # return the exit status of the last command executed.

compound comparison a logical and exp1 a exp2 returns true if both exp1 and exp2 are true. o logical or exp1 o exp2 returns true if either exp1 or exp2 are true. These are similar to the Bash comparison operators && and ||, used within double brackets. Chapter 7. Tests 53

Advanced BashScripting Guide

[[ condition1 && condition2 ]]

The o and a operators work with the test command or occur within single test brackets.
if [ "$exp1" a "$exp2" ]

Refer to Example 83 and Example 2611 to see compound comparison operators in action.

7.4. Nested if/then Condition Tests

Condition tests using the if/then construct may be nested. The net result is identical to using the && compound comparison operator above.
if [ condition1 ] then if [ condition2 ] then dosomething # But only if both "condition1" and "condition2" valid. fi fi

See Example 354 for an example of nested if/then condition tests.

7.5. Testing Your Knowledge of Tests

The systemwide xinitrc file can be used to launch the X server. This file contains quite a number of if/then tests, as the following excerpt shows.
if [ f $HOME/.Xclients ]; then exec $HOME/.Xclients elif [ f /etc/X11/xinit/Xclients ]; then exec /etc/X11/xinit/Xclients else # failsafe settings. Although we should never get here # (we provide fallbacks in Xclients as well) it can't hurt. xclock geometry 100x1005+5 & xterm geometry 80x5050+150 & if [ f /usr/bin/netscape a f /usr/share/doc/HTML/index.html ]; then netscape /usr/share/doc/HTML/index.html & fi fi

Explain the "test" constructs in the above excerpt, then examine the entire file, /etc/X11/xinit/xinitrc, and analyze the if/then test constructs there. You may need to refer ahead to the discussions of grep, sed, and regular expressions.

Chapter 7. Tests

54

Chapter 8. Operations and Related Topics

8.1. Operators
assignment variable assignment Initializing or changing the value of a variable = Allpurpose assignment operator, which works for both arithmetic and string assignments.
var=27 category=minerals

# No spaces allowed after the "=".

Do not confuse the "=" assignment operator with the = test operator.
# = as a test operator

if [ "$string1" = "$string2" ] # if [ "X$string1" = "X$string2" ] is safer, # to prevent an error message should one of the variables be empty. # (The prepended "X" characters cancel out.) then command fi

arithmetic operators + plus minus * multiplication / division ** exponentiation

# Bash, version 2.02, introduced the "**" exponentiation operator. let "z=5**3" echo "z = $z"

# z = 125

% modulo, or mod (returns the remainder of an integer division operation)

bash$ echo `expr 5 % 3` 2

This operator finds use in, among other things, generating numbers within a specific range (see Example 923 and Example 925) and formatting program output (see Example 2610 and Example Chapter 8. Operations and Related Topics 55

Advanced BashScripting Guide A7). It can even be used to generate prime numbers, (see Example A17). Modulo turns up surprisingly often in various numerical recipes.

Example 81. Greatest common divisor

#!/bin/bash # gcd.sh: greatest common divisor # Uses Euclid's algorithm # The "greatest common divisor" (gcd) of two integers #+ is the largest integer that will divide both, leaving no remainder. # # #+ #+ #+ #+ # # # Euclid's algorithm uses successive division. In each pass, dividend < divisor divisor < remainder until remainder = 0. The gcd = dividend, on the final pass. For an excellent discussion of Euclid's algorithm, see Jim Loy's site, http://www.jimloy.com/number/euclids.htm.

# # Argument check ARGS=2 E_BADARGS=65 if [ $# ne "$ARGS" ] then echo "Usage: `basename $0` firstnumber secondnumber" exit $E_BADARGS fi #

gcd () { # # #+ # Arbitrary assignment. It does not matter which of the two is larger. Why?

dividend=$1 divisor=$2

remainder=1

# If uninitialized variable used in loop, #+ it results in an error message #+ on first pass through loop.

until [ "$remainder" eq 0 ] do let "remainder = $dividend % $divisor" dividend=$divisor # Now repeat with 2 smallest numbers. divisor=$remainder done # Euclid's algorithm } # Last $dividend is the gcd.

gcd $1 $2

Chapter 8. Operations and Related Topics

56

Advanced BashScripting Guide

echo; echo "GCD of $1 and $2 = $dividend"; echo

# Exercise : # # Check commandline arguments to make sure they are integers, #+ and exit the script with an appropriate error message if not. exit 0

+= "plusequal" (increment variable by a constant) let "var += 5" results in var being incremented by 5. = "minusequal" (decrement variable by a constant) *= "timesequal" (multiply variable by a constant) let "var *= 4" results in var being multiplied by 4. /= "slashequal" (divide variable by a constant) %= "modequal" (remainder of dividing variable by a constant) Arithmetic operators often occur in an expr or let expression.

Example 82. Using Arithmetic Operations

#!/bin/bash # Counting to 6 in 5 different ways. n=1; echo n "$n " let "n = $n + 1" echo n "$n " # let "n = n + 1" also works.

: $((n = $n + 1)) # ":" necessary because otherwise Bash attempts #+ to interpret "$((n = $n + 1))" as a command. echo n "$n " n=$(($n + 1)) echo n "$n " : $[ n = $n + 1 ] # ":" necessary because otherwise Bash attempts #+ to interpret "$[ n = $n + 1 ]" as a command. # Works even if "n" was initialized as a string. echo n "$n " n=$[ $n + 1 ] # Works even if "n" was initialized as a string. #* Avoid this type of construct, since it is obsolete and nonportable. echo n "$n "; echo # Thanks, Stephane Chazelas.

Chapter 8. Operations and Related Topics

57

Advanced BashScripting Guide

exit 0

Integer variables in Bash are actually signed long (32bit) integers, in the range of 2147483648 to 2147483647. An operation that takes a variable outside these limits will give an erroneous result.
a=2147483646 echo "a = $a" let "a+=1" echo "a = $a" let "a+=1" echo "a = $a"

# # # # # #

a = 2147483646 Increment "a". a = 2147483647 increment "a" again, past the limit. a = 2147483648 ERROR (out of range)

Bash does not understand floating point arithmetic. It treats numbers containing a decimal point as strings.
a=1.5 let "b = $a + 1.3" # Error. # t2.sh: let: b = 1.5 + 1.3: syntax error in expression (error token is ".5 + 1.3") echo "b = $b" # b=1

Use bc in scripts that that need floating point calculations or math library functions. bitwise operators. The bitwise operators seldom make an appearance in shell scripts. Their chief use seems to be manipulating and testing values read from ports or sockets. "Bit flipping" is more relevant to compiled languages, such as C and C++, which run fast enough to permit its use on the fly. bitwise operators << bitwise left shift (multiplies by 2 for each shift position) <<= "leftshiftequal" let "var <<= 2" results in var leftshifted 2 bits (multiplied by 4) >> bitwise right shift (divides by 2 for each shift position) >>= "rightshiftequal" (inverse of <<=) & bitwise and &= "bitwise andequal" | bitwise OR |= "bitwise ORequal" ~ Chapter 8. Operations and Related Topics 58

Advanced BashScripting Guide bitwise negate ! bitwise NOT ^ bitwise XOR ^= "bitwise XORequal" logical operators && and (logical)
if [ $condition1 ] && [ $condition2 ] # Same as: if [ $condition1 a $condition2 ] # Returns true if both condition1 and condition2 hold true... if [[ $condition1 && $condition2 ]] # Also works. # Note that && operator not permitted within [ ... ] construct.

&& may also, depending on context, be used in an and list to concatenate commands. || or (logical)
if [ $condition1 ] || [ $condition2 ] # Same as: if [ $condition1 o $condition2 ] # Returns true if either condition1 or condition2 holds true... if [[ $condition1 || $condition2 ]] # Also works. # Note that || operator not permitted within [ ... ] construct.

Bash tests the exit status of each statement linked with a logical operator.

Example 83. Compound Condition Tests Using && and ||

#!/bin/bash a=24 b=47 if [ "$a" eq 24 ] && [ "$b" eq 47 ] then echo "Test #1 succeeds." else echo "Test #1 fails." fi # ERROR: if [ "$a" eq 24 && "$b" eq 47 ] # attempts to execute ' [ "$a" eq 24 ' # and fails to finding matching ']'. # # if [[ $a eq 24 && $b eq 24 ]] works # (The "&&" has a different meaning in line 17 than in line 6.) # Thanks, Stephane Chazelas.

Chapter 8. Operations and Related Topics

59

Advanced BashScripting Guide

if [ "$a" eq 98 ] || [ "$b" eq 47 ] then echo "Test #2 succeeds." else echo "Test #2 fails." fi

# The a and o options provide #+ an alternative compound condition test. # Thanks to Patrick Callahan for pointing this out.

if [ "$a" eq 24 a "$b" eq 47 ] then echo "Test #3 succeeds." else echo "Test #3 fails." fi

if [ "$a" eq 98 o "$b" eq 47 ] then echo "Test #4 succeeds." else echo "Test #4 fails." fi

a=rhino b=crocodile if [ "$a" = rhino ] && [ "$b" = crocodile ] then echo "Test #5 succeeds." else echo "Test #5 fails." fi exit 0

The && and || operators also find use in an arithmetic context.

bash$ echo $(( 1 && 2 )) $((3 && 0)) $((4 || 0)) $((0 || 0)) 1 0 1 0

miscellaneous operators , comma operator The comma operator chains together two or more arithmetic operations. All the operations are evaluated (with possible side effects), but only the last operation is returned.
let "t1 = ((5 + 3, 7 1, 15 4))" echo "t1 = $t1" # t1 = 11

Chapter 8. Operations and Related Topics

60

Advanced BashScripting Guide

let "t2 = ((a = 9, 15 / 3))" echo "t2 = $t2 a = $a" # Set "a" and calculate "t2". # t2 = 5 a = 9

The comma operator finds use mainly in for loops. See Example 1012.

8.2. Numerical Constants

A shell script interprets a number as decimal (base 10), unless that number has a special prefix or notation. A number preceded by a 0 is octal (base 8). A number preceded by 0x is hexadecimal (base 16). A number with an embedded # evaluates as BASE#NUMBER (with range and notational restrictions).

Example 84. Representation of numerical constants

#!/bin/bash # numbers.sh: Representation of numbers in different bases. # Decimal: the default let "dec = 32" echo "decimal number = $dec" # Nothing out of the ordinary here.

# 32

# Octal: numbers preceded by '0' (zero) let "oct = 032" echo "octal number = $oct" # Expresses result in decimal. #

# 26

# Hexadecimal: numbers preceded by '0x' or '0X' let "hex = 0x32" echo "hexadecimal number = $hex" # 50 # Expresses result in decimal. # Other bases: BASE#NUMBER # BASE between 2 and 64. # NUMBER must use symbols within the BASE range, see below. let "bin = 2#111100111001101" echo "binary number = $bin" let "b32 = 32#77" echo "base32 number = $b32"

# 31181

# 231

let "b64 = 64#@_" echo "base64 number = $b64" # 4094 # # This notation only works for a limited range (2 64) # 10 digits + 26 lowercase characters + 26 uppercase characters + @ + _ echo echo $((36#zz)) $((2#10101010)) $((16#AF16)) $((53#1aA)) # 1295 170 44822 3375

# #

Important note:

Chapter 8. Operations and Related Topics

61

Advanced BashScripting Guide

# Using a digit out of range of the specified base notation #+ will give an error message. let "bad_oct = 081" # numbers.sh: let: oct = 081: value too great for base (error token is "081") # Octal numbers use only digits in the range 0 7. exit 0 # Thanks, Rich Bartell and Stephane Chazelas, for clarification.

Chapter 8. Operations and Related Topics

62

Part 3. Beyond the Basics

Table of Contents 9. Variables Revisited 9.1. Internal Variables 9.2. Manipulating Strings 9.3. Parameter Substitution 9.4. Typing variables: declare or typeset 9.5. Indirect References to Variables 9.6. $RANDOM: generate random integer 9.7. The Double Parentheses Construct 10. Loops and Branches 10.1. Loops 10.2. Nested Loops 10.3. Loop Control 10.4. Testing and Branching 11. Internal Commands and Builtins 11.1. Job Control Commands 12. External Filters, Programs and Commands 12.1. Basic Commands 12.2. Complex Commands 12.3. Time / Date Commands 12.4. Text Processing Commands 12.5. File and Archiving Commands 12.6. Communications Commands 12.7. Terminal Control Commands 12.8. Math Commands 12.9. Miscellaneous Commands 13. System and Administrative Commands 14. Command Substitution 15. Arithmetic Expansion 16. I/O Redirection 16.1. Using exec 16.2. Redirecting Code Blocks 16.3. Applications 17. Here Documents 18. Recess Time

Part 3. Beyond the Basics

63

Chapter 9. Variables Revisited

Used properly, variables can add power and flexibility to scripts. This requires learning their subtleties and nuances.

9.1. Internal Variables

Builtin variables variables affecting bash script behavior $BASH the path to the Bash binary itself
bash$ echo $BASH /bin/bash

$BASH_ENV an environmental variable pointing to a Bash startup file to be read when a script is invoked $BASH_VERSINFO[n] a 6element array containing version information about the installed release of Bash. This is similar to $BASH_VERSION, below, but a bit more detailed.
# Bash version info: for n in 0 1 2 3 4 5 do echo "BASH_VERSINFO[$n] = ${BASH_VERSINFO[$n]}" done # # # # # # BASH_VERSINFO[0] BASH_VERSINFO[1] BASH_VERSINFO[2] BASH_VERSINFO[3] BASH_VERSINFO[4] BASH_VERSINFO[5] = = = = = = 2 05 8 1 release i386redhatlinuxgnu # # # # # # # Major version no. Minor version no. Patch level. Build version. Release status. Architecture (same as $MACHTYPE).

$BASH_VERSION the version of Bash installed on the system

bash$ echo $BASH_VERSION 2.04.12(1)release

tcsh% echo $BASH_VERSION BASH_VERSION: Undefined variable.

Checking $BASH_VERSION is a good method of determining which shell is running. $SHELL does not necessarily give the correct answer. $DIRSTACK the top value in the directory stack (affected by pushd and popd) This builtin variable corresponds to the dirs command, however dirs shows the entire contents of the directory stack. Chapter 9. Variables Revisited 64

Advanced BashScripting Guide $EDITOR the default editor invoked by a script, usually vi or emacs. $EUID "effective" user ID number Identification number of whatever identity the current user has assumed, perhaps by means of su. The $EUID is not necessarily the same as the $UID. $FUNCNAME name of the current function
xyz23 () { echo "$FUNCNAME now executing." } xyz23 echo "FUNCNAME = $FUNCNAME" # FUNCNAME = # Null value outside a function.

# xyz23 now executing.

$GLOBIGNORE A list of filename patterns to be excluded from matching in globbing. $GROUPS groups current user belongs to This is a listing (array) of the group id numbers for current user, as recorded in /etc/passwd.
root# echo $GROUPS 0

root# echo ${GROUPS[1]} 1

root# echo ${GROUPS[5]} 6

$HOME home directory of the user, usually /home/username (see Example 913) $HOSTNAME The hostname command assigns the system name at bootup in an init script. However, the gethostname() function sets the Bash internal variable $HOSTNAME. See also Example 913. $HOSTTYPE host type Like $MACHTYPE, identifies the system hardware.
bash$ echo $HOSTTYPE i686

$IFS input field separator

Chapter 9. Variables Revisited

65

Advanced BashScripting Guide This defaults to whitespace (space, tab, and newline), but may be changed, for example, to parse a commaseparated data file. Note that $* uses the first character held in $IFS. See Example 51.
bash$ echo $IFS | cat vte $

bash$ bash c 'set w x y z; IFS=":;"; echo "$*"' w:x:y:z

$IFS does not handle whitespace the same as it does other characters. Example 91. $IFS and whitespace
#!/bin/bash # $IFS treats whitespace differently than other characters. output_args_one_per_line() { for arg do echo "[$arg]" done } echo; echo "IFS=\" \"" echo "" IFS=" " var=" a b c " output_args_one_per_line $var # # [a] # [b] # [c]

# output_args_one_per_line `echo " a

b c

"`

echo; echo "IFS=:" echo "" IFS=: var=":a::b:c:::" output_args_one_per_line $var # # [] # [a] # [] # [b] # [c] # [] # [] # []

# Same as above, but substitute ":" for " ".

# The same thing happens with the "FS" field separator in awk. # Thank you, Stephane Chazelas. echo exit 0

Chapter 9. Variables Revisited

66

Advanced BashScripting Guide (Thanks, S. C., for clarification and examples.) $IGNOREEOF ignore EOF: how many endoffiles (controlD) the shell will ignore before logging out. $LC_COLLATE Often set in the .bashrc or /etc/profile files, this variable controls collation order in filename expansion and pattern matching. If mishandled, LC_COLLATE can cause unexpected results in filename globbing. As of version 2.05 of Bash, filename globbing no longer distinguishes between lowercase and uppercase letters in a character range between brackets. For example, ls [AM]* would match both File1.txt and file1.txt. To revert to the customary behavior of bracket matching, set LC_COLLATE to C by an export LC_COLLATE=C in /etc/profile and/or ~/.bashrc. $LC_CTYPE This internal variable controls character interpretation in globbing and pattern matching. $LINENO This variable is the line number of the shell script in which this variable appears. It has significance only within the script in which it appears, and is chiefly useful for debugging purposes.
# *** BEGIN DEBUG BLOCK *** last_cmd_arg=$_ # Save it. echo "At line number $LINENO, variable \"v1\" = $v1" echo "Last command argument processed = $last_cmd_arg" # *** END DEBUG BLOCK ***

$MACHTYPE machine type Identifies the system hardware.

bash$ echo $MACHTYPE i686

$OLDPWD old working directory ("OLDprintworkingdirectory", previous directory you were in) $OSTYPE operating system type
bash$ echo $OSTYPE linux

$PATH path to binaries, usually /usr/bin/, /usr/X11R6/bin/, /usr/local/bin, etc. When given a command, the shell automatically does a hash table search on the directories listed in the path for the executable. The path is stored in the environmental variable, $PATH, a list of directories, separated by colons. Normally, the system stores the $PATH definition in /etc/profile and/or ~/.bashrc (see Chapter 27).
bash$ echo $PATH /bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin:/sbin:/usr/sbin

PATH=${PATH}:/opt/bin appends the /opt/bin directory to the current path. In a script, it may be expedient to temporarily add a directory to the path in this way. When the script exits, this Chapter 9. Variables Revisited 67

Advanced BashScripting Guide restores the original $PATH (a child process, such as a script, may not change the environment of the parent process, the shell). The current "working directory", ./, is usually omitted from the $PATH as a security measure. $PIPESTATUS Exit status of last executed foreground pipe. Interestingly enough, this does not give the same result as the exit status of the last executed command.
bash$ echo $PIPESTATUS 0 bash$ ls al | bogus_command bash: bogus_command: command not found bash$ echo $PIPESTATUS 141 bash$ ls al | bogus_command bash: bogus_command: command not found bash$ echo $? 127

The $PIPESTATUS variable may contain an erroneous 0 value in a login shell.

tcsh% bash bash$ who | grep nobody | sort bash$ echo ${PIPESTATUS[*]} 0

The above lines contained in a script would produce the expected 0 1 0 output. Thank you, Wayne Pollock for pointing this out and supplying the above example. $PPID The $PPID of a process is the process id (pid) of its parent process. [19] Compare this with the pidof command. $PS1 This is the main prompt, seen at the command line. $PS2 The secondary prompt, seen when additional input is expected. It displays as ">". $PS3 The tertiary prompt, displayed in a select loop (see Example 1029). $PS4 The quartenary prompt, shown at the beginning of each line of output when invoking a script with the x option. It displays as "+". $PWD working directory (directory you are in at the time)

Chapter 9. Variables Revisited

68

Advanced BashScripting Guide This is the analog to the pwd builtin command.
#!/bin/bash E_WRONG_DIRECTORY=73 clear # Clear screen. TargetDirectory=/home/bozo/projects/GreatAmericanNovel cd $TargetDirectory echo "Deleting stale files in $TargetDirectory." if [ "$PWD" != "$TargetDirectory" ] then # Keep from wiping out wrong directory by accident. echo "Wrong directory!" echo "In $PWD, rather than $TargetDirectory!" echo "Bailing out!" exit $E_WRONG_DIRECTORY fi rm rf * rm .[AZaz09]* # Delete dotfiles. # rm f .[^.]* ..?* to remove filenames beginning with multiple dots. # (shopt s dotglob; rm f *) will also work. # Thanks, S.C. for pointing this out. # Filenames may contain all characters in the 0 255 range, except "/". # Deleting files beginning with weird characters is left as an exercise. # Various other operations here, as necessary. echo echo "Done." echo "Old files deleted in $TargetDirectory." echo

exit 0

$REPLY The default value when a variable is not supplied to read. Also applicable to select menus, but only supplies the item number of the variable chosen, not the value of the variable itself.
#!/bin/bash echo echo n "What is your favorite vegetable? " read echo "Your favorite vegetable is $REPLY." # REPLY holds the value of last "read" if and only if # no variable supplied. echo echo n "What is your favorite fruit? " read fruit echo "Your favorite fruit is $fruit." echo "but..." echo "Value of \$REPLY is still $REPLY." # $REPLY is still set to its previous value because

Chapter 9. Variables Revisited

69

Advanced BashScripting Guide

# the variable $fruit absorbed the new "read" value. echo exit 0

$SECONDS The number of seconds the script has been running.

#!/bin/bash TIME_LIMIT=10 INTERVAL=1 echo echo "Hit ControlC to exit before $TIME_LIMIT seconds." echo while [ "$SECONDS" le "$TIME_LIMIT" ] do if [ "$SECONDS" eq 1 ] then units=second else units=seconds fi echo "This script has been running $SECONDS $units." # On a slow or overburdened machine, the script may skip a count #+ every once in a while. sleep $INTERVAL done echo e "\a" exit 0 # Beep!

$SHELLOPTS the list of enabled shell options, a readonly variable

bash$ echo $SHELLOPTS braceexpand:hashall:histexpand:monitor:history:interactivecomments:emacs

$SHLVL Shell level, how deeply Bash is nested. If, at the command line, $SHLVL is 1, then in a script it will increment to 2. $TMOUT If the $TMOUT environmental variable is set to a nonzero value time, then the shell prompt will time out after time seconds. This will cause a logout. Unfortunately, this works only while waiting for input at the shell prompt console or in an xterm. While it would be nice to speculate on the uses of this internal variable for timed input, for example in combination with read, $TMOUT does not work in that context and is virtually useless for shell scripting. (Reportedly the ksh version of a timed read does work.) Implementing timed input in a script is certainly possible, but may require complex machinations. One method is to set up a timing loop to signal the script when it times out. This also requires a signal Chapter 9. Variables Revisited 70

Advanced BashScripting Guide handling routine to trap (see Example 305) the interrupt generated by the timing loop (whew!).

Example 92. Timed Input

#!/bin/bash # timedinput.sh # TMOUT=3 TIMELIMIT=3 useless in a script # Three seconds in this instance, may be set to different value.

PrintAnswer() { if [ "$answer" = TIMEOUT ] then echo $answer else # Don't want to mix up the two instances. echo "Your favorite veggie is $answer" kill $! # Kills no longer needed TimerOn function running in background. # $! is PID of last job running in background. fi }

TimerOn() { sleep $TIMELIMIT && kill s 14 $$ & # Waits 3 seconds, then sends sigalarm to script. } Int14Vector() { answer="TIMEOUT" PrintAnswer exit 14 } trap Int14Vector 14 # Timer interrupt (14) subverted for our purposes.

echo "What is your favorite vegetable " TimerOn read answer PrintAnswer

# Admittedly, this is a kludgy implementation of timed input, #+ however the "t" option to "read" simplifies this task. # See "tout.sh", below. # If you need something really elegant... #+ consider writing the application in C or C++, #+ using appropriate library functions, such as 'alarm' and 'setitimer'. exit 0

An alternative is using stty.

Chapter 9. Variables Revisited

71

Advanced BashScripting Guide Example 93. Once more, timed input

#!/bin/bash # timeout.sh # Written by Stephane Chazelas, # and modified by the document author. INTERVAL=5 # timeout interval

timedout_read() { timeout=$1 varname=$2 old_tty_settings=`stty g` stty icanon min 0 time ${timeout}0 eval read $varname # or just stty "$old_tty_settings" # See man page for "stty". }

read $varname

echo; echo n "What's your name? Quick! " timedout_read $INTERVAL your_name # This may not work on every terminal type. # The maximum timeout depends on the terminal. # (it is often 25.5 seconds). echo if [ ! z "$your_name" ] # If name input before timeout... then echo "Your name is $your_name." else echo "Timed out." fi echo # The behavior of this script differs somewhat from "timedinput.sh". # At each keystroke, the counter resets. exit 0

Perhaps the simplest method is using the t option to read.

Example 94. Timed read

#!/bin/bash # tout.sh (per a suggestion by "syngin seven) TIMELIMIT=4 # 4 seconds

read t $TIMELIMIT variable <&1 echo if [ z "$variable" ] then echo "Timed out, variable still unset."

Chapter 9. Variables Revisited

72

Advanced BashScripting Guide

else echo "variable = $variable" fi exit 0

$UID user ID number current user's user identification number, as recorded in /etc/passwd This is the current user's real id, even if she has temporarily assumed another identity through su. $UID is a readonly variable, not subject to change from the command line or within a script, and is the counterpart to the id builtin.

Example 95. Am I root?

#!/bin/bash # amiroot.sh: ROOT_UID=0

Am I root or not?

# Root has $UID 0.

if [ "$UID" eq "$ROOT_UID" ] # Will the real "root" please stand up? then echo "You are root." else echo "You are just an ordinary user (but mom loves you just the same)." fi exit 0

# ============================================================= # # Code below will not execute, because the script already exited. # An alternate method of getting to the root of matters: ROOTUSER_NAME=root username=`id nu` # Or... username=`whoami` if [ "$username" = "$ROOTUSER_NAME" ] then echo "Rooty, toot, toot. You are root." else echo "You are just a regular fella." fi

See also Example 22. The variables $ENV, $LOGNAME, $MAIL, $TERM, $USER, and $USERNAME are not Bash builtins. These are, however, often set as environmental variables in one of the Bash startup files. $SHELL, the name of the user's login shell, may be set from /etc/passwd or in an "init" script, and it is likewise not a Bash builtin.
tcsh% echo $LOGNAME bozo tcsh% echo $SHELL

Chapter 9. Variables Revisited

73

Advanced BashScripting Guide

/bin/tcsh tcsh% echo $TERM rxvt bash$ echo $LOGNAME bozo bash$ echo $SHELL /bin/tcsh bash$ echo $TERM rxvt

Positional Parameters $0, $1, $2, etc. positional parameters, passed from command line to script, passed to a function, or set to a variable (see Example 45 and Example 1113) $# number of command line arguments [20] or positional parameters (see Example 342) $* All of the positional parameters, seen as a single word $@ Same as $*, but each parameter is a quoted string, that is, the parameters are passed on intact, without interpretation or expansion. This means, among other things, that each parameter in the argument list is seen as a separate word.

Example 96. arglist: Listing arguments with $* and $@

#!/bin/bash # Invoke this script with several arguments, such as "one two three". E_BADARGS=65 if [ ! n "$1" ] then echo "Usage: `basename $0` argument1 argument2 etc." exit $E_BADARGS fi echo index=1 echo "Listing args with \"\$*\":" for arg in "$*" # Doesn't work properly if "$*" isn't quoted. do echo "Arg #$index = $arg" let "index+=1" done # $* sees all arguments as single word. echo "Entire arg list seen as single word." echo index=1 echo "Listing args with \"\$@\":"

Chapter 9. Variables Revisited

74

Advanced BashScripting Guide

for arg in "$@" do echo "Arg #$index = $arg" let "index+=1" done # $@ sees arguments as separate words. echo "Arg list seen as separate words." echo exit 0

Following a shift, the $@ holds the remaining commandline parameters, lacking the previous $1, which was lost.
#!/bin/bash # Invoke with ./scriptname 1 2 3 4 5 echo "$@" shift echo "$@" shift echo "$@" # 1 2 3 4 5 # 2 3 4 5 # 3 4 5

# Each "shift" loses parameter $1. # "$@" then contains the remaining parameters.

The $@ special parameter finds use as a tool for filtering input into shell scripts. The cat "$@" construction accepts input to a script either from stdin or from files given as parameters to the script. See Example 1217 and Example 1218. The $* and $@ parameters sometimes display inconsistent and puzzling behavior, depending on the setting of $IFS.

Example 97. Inconsistent $* and $@ behavior

#!/bin/bash # Erratic behavior of the "$*" and "$@" internal Bash variables, #+ depending on whether they are quoted or not. # Inconsistent handling of word splitting and linefeeds.

set "First one" "second" "third:one" "" "Fifth: :one" # Setting the script arguments, $1, $2, etc. echo echo 'IFS unchanged, using "$*"' c=0 for i in "$*" # quoted do echo "$((c+=1)): [$i]" # This line remains the same in every instance. # Echo args. done echo echo 'IFS unchanged, using $*' c=0

Chapter 9. Variables Revisited

75

Advanced BashScripting Guide

for i in $* do echo "$((c+=1)): [$i]" done echo # unquoted

echo 'IFS unchanged, using "$@"' c=0 for i in "$@" do echo "$((c+=1)): [$i]" done echo echo 'IFS unchanged, using $@' c=0 for i in $@ do echo "$((c+=1)): [$i]" done echo IFS=: echo 'IFS=":", using "$*"' c=0 for i in "$*" do echo "$((c+=1)): [$i]" done echo echo 'IFS=":", using $*' c=0 for i in $* do echo "$((c+=1)): [$i]" done echo var=$* echo 'IFS=":", using "$var" (var=$*)' c=0 for i in "$var" do echo "$((c+=1)): [$i]" done echo echo 'IFS=":", using $var (var=$*)' c=0 for i in $var do echo "$((c+=1)): [$i]" done echo var="$*" echo 'IFS=":", using $var (var="$*")' c=0 for i in $var do echo "$((c+=1)): [$i]" done echo echo 'IFS=":", using "$var" (var="$*")' c=0 for i in "$var" do echo "$((c+=1)): [$i]" done

Chapter 9. Variables Revisited

76

Advanced BashScripting Guide

echo echo 'IFS=":", using "$@"' c=0 for i in "$@" do echo "$((c+=1)): [$i]" done echo echo 'IFS=":", using $@' c=0 for i in $@ do echo "$((c+=1)): [$i]" done echo var=$@ echo 'IFS=":", using $var (var=$@)' c=0 for i in $var do echo "$((c+=1)): [$i]" done echo echo 'IFS=":", using "$var" (var=$@)' c=0 for i in "$var" do echo "$((c+=1)): [$i]" done echo var="$@" echo 'IFS=":", using "$var" (var="$@")' c=0 for i in "$var" do echo "$((c+=1)): [$i]" done echo echo 'IFS=":", using $var (var="$@")' c=0 for i in $var do echo "$((c+=1)): [$i]" done echo # Try this script with ksh or zsh y. exit 0 # This example script by Stephane Chazelas, # and slightly modified by the document author.

The $@ and $* parameters differ only when between double quotes.

Example 98. $* and $@ when $IFS is empty

Chapter 9. Variables Revisited

77

Advanced BashScripting Guide

#!/bin/bash # If $IFS set, but empty, # then "$*" and "$@" do not echo positional params as expected. mecho () # Echo positional parameters. { echo "$1,$2,$3"; }

IFS="" set a b c mecho "$*" mecho $* mecho $@ mecho "$@"

# Set, but empty. # Positional parameters. # abc,, # a,b,c # a,b,c # a,b,c

# The behavior of $* and $@ when $IFS is empty depends # on whatever Bash or sh version being run. # It is therefore inadvisable to depend on this "feature" in a script.

# Thanks, S.C. exit 0

Other Special Parameters $ Flags passed to script (using set). See Example 1113. This was originally a ksh construct adopted into Bash, and unfortunately it does not seem to work reliably in Bash scripts. One possible use for it is to have a script selftest whether it is interactive. $! PID (process ID) of last job run in background
LOG=$0.log COMMAND1="sleep 100" echo "Logging PIDs background commands for script: $0" >> "$LOG" # So they can be monitored, and killed as necessary. echo >> "$LOG" # Logging commands. echo n "PID of \"$COMMAND1\": ${COMMAND1} & echo $! >> "$LOG" # PID of "sleep 100": 1506 " >> "$LOG"

# Thank you, Jacques Lederer, for suggesting this.

$_ Special variable set to last argument of previous command executed. Chapter 9. Variables Revisited 78

Advanced BashScripting Guide Example 99. Underscore variable

#!/bin/bash echo $_ # /bin/bash # Just called /bin/bash to run the script. # So no output from command. # du # So no output from command. # al (last argument)

du >/dev/null echo $_ ls al >/dev/null echo $_ : echo $_

# :

$? Exit status of a command, function, or the script itself (see Example 233) $$ Process ID of the script itself. The $$ variable often finds use in scripts to construct "unique" temp file names (see Example A14, Example 306, Example 1223, and Example 1123). This is usually simpler than invoking mktemp.

9.2. Manipulating Strings

Bash supports a surprising number of string manipulation operations. Unfortunately, these tools lack a unified focus. Some are a subset of parameter substitution, and others fall under the functionality of the UNIX expr command. This results in inconsistent command syntax and overlap of functionality, not to mention confusion. String Length ${#string} expr length $string expr "$string" : '.*'
stringZ=abcABC123ABCabc echo ${#stringZ} echo `expr length $stringZ` echo `expr "$stringZ" : '.*'` # 15 # 15 # 15

Example 910. Inserting a blank line between paragraphs in a text file

#!/bin/bash # paragraphspace.sh # Inserts a blank line between paragraphs of a singlespaced text file. # Usage: $0 <FILENAME MINLEN=45 # May need to change this value. # Assume lines shorter than $MINLEN characters #+ terminate a paragraph.

Chapter 9. Variables Revisited

79

Advanced BashScripting Guide

while read line do echo "$line" # For as many lines as the input file has... # Output the line itself.

len=${#line} if [ "$len" lt "$MINLEN" ] then echo # Add a blank line after short line. fi done exit 0

Length of Matching Substring at Beginning of String expr match "$string" '$substring' $substring is a regular expression. expr "$string" : '$substring' $substring is a regular expression.
stringZ=abcABC123ABCabc # || echo `expr match "$stringZ" 'abc[AZ]*.2'` echo `expr "$stringZ" : 'abc[AZ]*.2'` # 8 # 8

Index expr index $string $substring Numerical position in $string of first character in $substring that matches.
stringZ=abcABC123ABCabc echo `expr index "$stringZ" C12`

# 6 # C position. # 3

echo `expr index "$stringZ" 1c` # 'c' (in #3 position) matches before '1'.

This is the near equivalent of strchr() in C. Substring Extraction ${string:position} Extracts substring from $string at $position. If the $string parameter is "*" or "@", then this extracts the positional parameters, [21] starting at $position. ${string:position:length} Extracts $length characters of substring from $string at $position.
stringZ=abcABC123ABCabc # 0123456789..... # 0based indexing. echo ${stringZ:0} echo ${stringZ:1} # abcABC123ABCabc # bcABC123ABCabc

Chapter 9. Variables Revisited

80

Advanced BashScripting Guide

echo ${stringZ:7} echo ${stringZ:7:3} # 23ABCabc # 23A # Three characters of substring.

# Is it possible to index from the right end of the string? echo ${stringZ:4} # abcABC123ABCabc # Defaults to full string, as in ${parameter:default}. # However . . . echo ${stringZ:(4)} # Cabc echo ${stringZ: 4} # Cabc # Now, it works. # Parentheses or added space "escape" the position parameter. # Thank you, Dan Jacobson, for pointing this out.

If the $string parameter is "*" or "@", then this extracts a maximum of $length positional parameters, starting at $position.
echo ${*:2} echo ${@:2} echo ${*:2:3} # Echoes second and following positional parameters. # Same as above. # Echoes three positional parameters, starting at second.

expr substr $string $position $length Extracts $length characters from $string starting at $position.
stringZ=abcABC123ABCabc # 123456789...... # 1based indexing. echo `expr substr $stringZ 1 2` echo `expr substr $stringZ 4 3` # ab # ABC

expr match "$string" '\($substring\)' Extracts $substring at beginning of $string, where $substring is a regular expression. expr "$string" : '\($substring\)' Extracts $substring at beginning of $string, where $substring is a regular expression.
stringZ=abcABC123ABCabc # ======= echo `expr match "$stringZ" '\(.[bc]*[AZ]..[09]\)'` echo `expr "$stringZ" : '\(.[bc]*[AZ]..[09]\)'` echo `expr "$stringZ" : '\(.......\)'` # All of the above forms give an identical result. # abcABC1 # abcABC1 # abcABC1

expr match "$string" '.*\($substring\)' Extracts $substring at end of $string, where $substring is a regular expression. expr "$string" : '.*\($substring\)' Extracts $substring at end of $string, where $substring is a regular expression.
stringZ=abcABC123ABCabc # ======

Chapter 9. Variables Revisited

81

Advanced BashScripting Guide

echo `expr match "$stringZ" '.*\([AC][AC][AC][ac]*\)'` echo `expr "$stringZ" : '.*\(......\)'` # ABCabc # ABCabc

Substring Removal ${string#substring} Strips shortest match of $substring from front of $string. ${string##substring} Strips longest match of $substring from front of $string.
stringZ=abcABC123ABCabc # || # || echo ${stringZ#a*C} # 123ABCabc # Strip out shortest match between 'a' and 'C'. echo ${stringZ##a*C} # abc # Strip out longest match between 'a' and 'C'.

${string%substring} Strips shortest match of $substring from back of $string. ${string%%substring} Strips longest match of $substring from back of $string.
stringZ=abcABC123ABCabc # || # || echo ${stringZ%b*c} # abcABC123ABCa # Strip out shortest match between 'b' and 'c', from back of $stringZ. echo ${stringZ%%b*c} # a # Strip out longest match between 'b' and 'c', from back of $stringZ.

Example 911. Converting graphic file formats, with filename change

#!/bin/bash # cvt.sh: # Converts all the MacPaint image files in a directory to "pbm" format. # Uses the "macptopbm" binary from the "netpbm" package, #+ which is maintained by Brian Henderson ([email protected]). # Netpbm is a standard part of most Linux distros. OPERATION=macptopbm SUFFIX=pbm # New filename suffix. if [ n "$1" ] then directory=$1 else directory=$PWD fi

# If directory name given as a script argument... # Otherwise use current working directory.

# Assumes all files in the target directory are MacPaint image files, # + with a ".mac" suffix.

Chapter 9. Variables Revisited

82

Advanced BashScripting Guide

for file in $directory/* do filename=${file%.*c} # Filename globbing.

# Strip ".mac" suffix off filename #+ ('.*c' matches everything #+ between '.' and 'c', inclusive). $OPERATION $file > "$filename.$SUFFIX" # Redirect conversion to new filename. rm f $file # Delete original files after converting. echo "$filename.$SUFFIX" # Log what is happening to stdout. done exit 0 # Exercise: # # As it stands, this script converts *all* the files in the current #+ working directory. # Modify it to work *only* on files with a ".mac" suffix.

Substring Replacement ${string/substring/replacement} Replace first match of $substring with $replacement. ${string//substring/replacement} Replace all matches of $substring with $replacement.
stringZ=abcABC123ABCabc echo ${stringZ/abc/xyz} # xyzABC123ABCabc # Replaces first match of 'abc' with 'xyz'. # xyzABC123ABCxyz # Replaces all matches of 'abc' with # 'xyz'.

echo ${stringZ//abc/xyz}

${string/#substring/replacement} If $substring matches front end of $string, substitute $replacement for $substring. ${string/%substring/replacement} If $substring matches back end of $string, substitute $replacement for $substring.
stringZ=abcABC123ABCabc echo ${stringZ/#abc/XYZ} # XYZABC123ABCabc # Replaces frontend match of 'abc' with 'XYZ'. # abcABC123ABCXYZ # Replaces backend match of 'abc' with 'XYZ'.

echo ${stringZ/%abc/XYZ}

9.2.1. Manipulating strings using awk

A Bash script may invoke the string manipulation facilities of awk as an alternative to using its builtin operations.

Example 912. Alternate ways of extracting substrings

Chapter 9. Variables Revisited

83

Advanced BashScripting Guide

#!/bin/bash # substringextraction.sh String=23skidoo1 # 012345678 Bash # 123456789 awk # Note different string indexing system: # Bash numbers first character of string as '0'. # Awk numbers first character of string as '1'. echo ${String:2:4} # position 3 (012), 4 characters long # skid # The awk equivalent of ${string:pos:length} is substr(string,pos,length). echo | awk ' { print substr("'"${String}"'",3,4) # skid } ' # Piping an empty "echo" to awk gives it dummy input, #+ and thus makes it unnecessary to supply a filename. exit 0

9.2.2. Further Discussion

For more on string manipulation in scripts, refer to Section 9.3 and the relevant section of the expr command listing. For script examples, see: 1. Example 126 2. Example 915 3. Example 916 4. Example 917 5. Example 919

9.3. Parameter Substitution

Manipulating and/or expanding variables ${parameter} Same as $parameter, i.e., value of the variable parameter. In certain contexts, only the less ambiguous ${parameter} form works. May be used for concatenating variables with strings.
your_id=${USER}on${HOSTNAME} echo "$your_id" # echo "Old \$PATH = $PATH" PATH=${PATH}:/opt/bin #Add /opt/bin to $PATH for duration of script. echo "New \$PATH = $PATH"

${parameterdefault}, ${parameter:default} If parameter not set, use default.

Chapter 9. Variables Revisited

84

Advanced BashScripting Guide

echo ${username`whoami`} # Echoes the result of `whoami`, if variable $username is still unset.

${parameterdefault} and ${parameter:default} are almost equivalent. The extra : makes a difference only when parameter has been declared, but is null.
#!/bin/bash username0= # username0 has been declared, but is set to null. echo "username0 = ${username0`whoami`}" # Will not echo. echo "username1 = ${username1`whoami`}" # username1 has not been declared. # Will echo. username2= # username2 has been declared, but is set to null. echo "username2 = ${username2:`whoami`}" # Will echo because of : rather than just in condition test. exit 0

The default parameter construct finds use in providing "missing" commandline arguments in scripts.
DEFAULT_FILENAME=generic.data filename=${1:$DEFAULT_FILENAME} # If not otherwise specified, the following command block operates #+ on the file "generic.data". # # Commands follow.

See also Example 34, Example 292, and Example A7. Compare this method with using an and list to supply a default commandline argument. ${parameter=default}, ${parameter:=default} If parameter not set, set it to default. Both forms nearly equivalent. The : makes a difference only when $parameter has been declared and is null, [22] as above.
echo ${username=`whoami`} # Variable "username" is now set to `whoami`.

${parameter+alt_value}, ${parameter:+alt_value} If parameter set, use alt_value, else use null string. Both forms nearly equivalent. The : makes a difference only when parameter has been declared and is null, see below.
echo "###### \${parameter+alt_value} ########" echo

Chapter 9. Variables Revisited

85

Advanced BashScripting Guide

a=${param1+xyz} echo "a = $a" param2= a=${param2+xyz} echo "a = $a" param3=123 a=${param3+xyz} echo "a = $a" # a =

# a = xyz

# a = xyz

echo echo "###### \${parameter:+alt_value} ########" echo a=${param4:+xyz} echo "a = $a"

# a =

param5= a=${param5:+xyz} echo "a = $a" # a = # Different result from param6=123 a=${param6+xyz} echo "a = $a"

a=${param5+xyz}

# a = xyz

${parameter?err_msg}, ${parameter:?err_msg} If parameter set, use it, else print err_msg. Both forms nearly equivalent. The : makes a difference only when parameter has been declared and is null, as above.

Example 913. Using parameter substitution and error messages

#!/bin/bash # Check some of the system's environmental variables. # If, for example, $USER, the name of the person at the console, is not set, #+ the machine will not recognize you. : ${HOSTNAME?} ${USER?} ${HOME?} ${MAIL?} echo echo "Name of the machine is $HOSTNAME." echo "You are $USER." echo "Your home directory is $HOME." echo "Your mail INBOX is located in $MAIL." echo echo "If you are reading this message," echo "critical environmental variables have been set." echo echo # # The ${variablename?} construction can also check #+ for variables set within the script. ThisVariable=ValueofThisVariable # Note, by the way, that string variables may be set

Chapter 9. Variables Revisited

86

Advanced BashScripting Guide

#+ to characters disallowed in their names. : ${ThisVariable?} echo "Value of ThisVariable is $ThisVariable". echo echo

: ${ZZXy23AB?"ZZXy23AB has not been set."} # If ZZXy23AB has not been set, #+ then the script terminates with an error message. # You can specify the error message. # : ${ZZXy23AB?"ZZXy23AB has not been set."}

# Same result with: # # #

dummy_variable=${ZZXy23AB?} dummy_variable=${ZZXy23AB?"ZXy23AB has not been set."} echo ${ZZXy23AB?} >/dev/null

echo "You will not see this message, because script terminated above." HERE=0 exit $HERE

# Will *not* exit here.

Example 914. Parameter substitution and "usage" messages

#!/bin/bash # usagemessage.sh : ${1?"Usage: $0 ARGUMENT"} # Script exits here if commandline parameter absent, #+ with following error message. # usagemessage.sh: 1: Usage: usagemessage.sh ARGUMENT echo "These two lines echo only if commandline parameter given." echo "command line parameter = \"$1\"" exit 0 # Will exit here only if commandline parameter present.

# Check the exit status, both with and without commandline parameter. # If commandline parameter present, then "$?" is 0. # If not, then "$?" is 1.

Parameter substitution and/or expansion. The following expressions are the complement to the match in expr string operations (see Example 126). These particular ones are used mostly in parsing file path names. Variable length / Substring removal ${#var} String length (number of characters in $var). For an array, ${#array} is the length of the first element in the array. Exceptions:

Chapter 9. Variables Revisited

87

Advanced BashScripting Guide ${#*} and ${#@} give the number of positional parameters. For an array, ${#array[*]} and ${#array[@]} give the number of elements in the array.

Example 915. Length of a variable

#!/bin/bash # length.sh E_NO_ARGS=65 if [ $# eq 0 ] # Must have commandline args to demo script. then echo "Invoke this script with one or more commandline arguments." exit $E_NO_ARGS fi var01=abcdEFGH28ij echo "var01 = ${var01}" echo "Length of var01 = ${#var01}" echo "Number of commandline arguments passed to script = ${#@}" echo "Number of commandline arguments passed to script = ${#*}" exit 0

${var#Pattern}, ${var##Pattern} Remove from $var the shortest/longest part of $Pattern that matches the front end of $var. A usage illustration from Example A8:
# Function from "daysbetween.sh" example. # Strips leading zero(s) from argument passed. strip_leading_zero () # Better to strip { # from day and/or val=${1#0} # since otherwise return $val # as octal values } possible leading zero(s) month Bash will interpret them (POSIX.2, sect 2.9.2.1).

Another usage illustration:

echo `basename $PWD` echo "${PWD##*/}" echo echo `basename $0` echo $0 echo "${0##*/}" echo filename=test.data echo "${filename##*.}" # Basename of current working directory. # Basename of current working directory. # Name of script. # Name of script. # Name of script.

# data # Extension of filename.

${var%Pattern}, ${var%%Pattern} Remove from $var the shortest/longest part of $Pattern that matches the back end of $var. Version 2 of Bash adds additional options. Chapter 9. Variables Revisited 88

Advanced BashScripting Guide Example 916. Pattern matching in parameter substitution

#!/bin/bash # Pattern matching

using the # ## % %% parameter substitution operators.

var1=abcd12345abc6789 pattern1=a*c # * (wild card) matches everything between a c. echo echo echo echo echo echo

"var1 = $var1" "var1 = ${var1}" "Number of characters in "pattern1 = $pattern1"

# abcd12345abc6789 # abcd12345abc6789 (alternate form) ${var1} = ${#var1}" # a*c (everything between 'a' and 'c')

echo '${var1#$pattern1} =' "${var1#$pattern1}" # # Shortest possible match, strips out first 3 characters # ^^^^^ echo '${var1##$pattern1} =' "${var1##$pattern1}" # # Longest possible match, strips out first 12 characters # ^^^^^ echo; echo pattern2=b*9 # everything between 'b' and '9' echo "var1 = $var1" # Still abcd12345abc6789 echo "pattern2 = $pattern2" echo echo '${var1%pattern2} =' "${var1%$pattern2}" # # Shortest possible match, strips out last 6 characters # ^^^^ echo '${var1%%pattern2} =' "${var1%%$pattern2}" # # Longest possible match, strips out last 12 characters # ^^^^ # Remember, # and ## work from the left end of string, # % and %% work from the right end. echo exit 0

d12345abc6789 abcd12345abc6789 || 6789 abcd12345abc6789 ||

abcd12345a abcd12345abc6789 || a abcd12345abc6789 ||

Example 917. Renaming file extensions:

#!/bin/bash # # rfe

# Renaming file extensions. # # rfe old_extension new_extension # # Example: # To rename all *.gif files in working directory to *.jpg, # rfe gif jpg

Chapter 9. Variables Revisited

89

Advanced BashScripting Guide

ARGS=2 E_BADARGS=65 if [ $# ne "$ARGS" ] then echo "Usage: `basename $0` old_file_suffix new_file_suffix" exit $E_BADARGS fi for filename in *.$1 # Traverse list of files ending with 1st argument. do mv $filename ${filename%$1}$2 # Strip off part of filename matching 1st argument, #+ then append 2nd argument. done exit 0

Variable expansion / Substring replacement These constructs have been adopted from ksh. ${var:pos} Variable var expanded, starting from offset pos. ${var:pos:len} Expansion to a max of len characters of variable var, from offset pos. See Example A15 for an example of the creative use of this operator. ${var/Pattern/Replacement} First match of Pattern, within var replaced with Replacement. If Replacement is omitted, then the first match of Pattern is replaced by nothing, that is, deleted. ${var//Pattern/Replacement} Global replacement. All matches of Pattern, within var replaced with Replacement. As above, if Replacement is omitted, then all occurrences of Pattern are replaced by nothing, that is, deleted.

Example 918. Using pattern matching to parse arbitrary strings

#!/bin/bash var1=abcd1234defg echo "var1 = $var1" t=${var1#**} echo "var1 (with everything, up to and including first stripped out) = $t" # t=${var1#*} works just the same, #+ since # matches the shortest string, #+ and * matches everything preceding, including an empty string. # (Thanks, S. C. for pointing this out.) t=${var1##**} echo "If var1 contains a \"\", returns empty string...

var1 = $t"

t=${var1%**}

Chapter 9. Variables Revisited

90

Advanced BashScripting Guide

echo "var1 (with everything from the last on stripped out) = $t" echo # path_name=/home/bozo/ideas/thoughts.for.today # echo "path_name = $path_name" t=${path_name##/*/} echo "path_name, stripped of prefixes = $t" # Same effect as t=`basename $path_name` in this particular case. # t=${path_name%/}; t=${t##*/} is a more general solution, #+ but still fails sometimes. # If $path_name ends with a newline, then `basename $path_name` will not work, #+ but the above expression will. # (Thanks, S.C.) t=${path_name%/*.*} # Same effect as t=`dirname $path_name` echo "path_name, stripped of suffixes = $t" # These will fail in some cases, such as "../", "/foo////", # "foo/", "/". # Removing suffixes, especially when the basename has no suffix, #+ but the dirname does, also complicates matters. # (Thanks, S.C.) echo t=${path_name:11} echo "$path_name, with first 11 chars stripped off = $t" t=${path_name:11:5} echo "$path_name, with first 11 chars stripped off, length 5 = $t" echo t=${path_name/bozo/clown} echo "$path_name with \"bozo\" replaced by \"clown\" = $t" t=${path_name/today/} echo "$path_name with \"today\" deleted = $t" t=${path_name//o/O} echo "$path_name with all o's capitalized = $t" t=${path_name//o/} echo "$path_name with all o's deleted = $t" exit 0

${var/#Pattern/Replacement} If prefix of var matches Pattern, then substitute Replacement for Pattern. ${var/%Pattern/Replacement} If suffix of var matches Pattern, then substitute Replacement for Pattern.

Example 919. Matching patterns at prefix or suffix of string

#!/bin/bash # Pattern replacement at prefix / suffix of string. v0=abc1234zip1234abc echo "v0 = $v0" echo # Original variable. # abc1234zip1234abc

# Match at prefix (beginning) of string.

Chapter 9. Variables Revisited

91

Advanced BashScripting Guide

v1=${v0/#abc/ABCDEF} echo "v1 = $v1" # # # # abc1234zip1234abc || ABCDE1234zip1234abc ||

# Match at suffix (end) of string. v2=${v0/%abc/ABCDEF} # abc1234zip123abc # || echo "v2 = $v2" # abc1234zip1234ABCDEF # || echo # # Must match at beginning / end of string, #+ otherwise no replacement results. # v3=${v0/#123/000} # Matches, but not at beginning. echo "v3 = $v3" # abc1234zip1234abc # NO REPLACEMENT. v4=${v0/%123/000} # Matches, but not at end. echo "v4 = $v4" # abc1234zip1234abc # NO REPLACEMENT. exit 0

${!varprefix*}, ${!varprefix@} Matches all previously declared variables beginning with varprefix.
xyz23=whatever xyz24= a=${!xyz*} echo "a = $a" a=${!xyz@} echo "a = $a" # # # # Expands to names of declared variables beginning with "xyz". a = xyz23 xyz24 Same as above. a = xyz23 xyz24

# Bash, version 2.04, adds this feature.

9.4. Typing variables: declare or typeset

The declare or typeset builtins (they are exact synonyms) permit restricting the properties of variables. This is a very weak form of the typing available in certain programming languages. The declare command is specific to version 2 or later of Bash. The typeset command also works in ksh scripts. declare/typeset options r readonly
declare r var1

(declare r var1 works the same as readonly var1) This is the rough equivalent of the C const type qualifier. An attempt to change the value of a readonly variable fails with an error message. i integer

Chapter 9. Variables Revisited

92

Advanced BashScripting Guide

declare i number # The script will treat subsequent occurrences of "number" as an integer. number=3 echo "number = $number"

# number = 3

number=three echo "number = $number" # number = 0 # Tries to evaluate "three" as an integer.

Note that certain arithmetic operations are permitted for declared integer variables without the need for expr or let. a array
declare a indices

The variable indices will be treated as an array. f functions

declare f

A declare f line with no arguments in a script causes a listing of all the functions previously defined in that script.
declare f function_name

A declare f function_name in a script lists just the function named. x export

declare x var3

This declares a variable as available for exporting outside the environment of the script itself. var=$value
declare x var3=373

The declare command permits assigning a value to a variable in the same statement as setting its properties.

Example 920. Using declare to type variables

#!/bin/bash func1 () { echo This is a function. } declare f echo declare i var1 # var1 is an integer. # Lists the function above.

Chapter 9. Variables Revisited

93

Advanced BashScripting Guide

var1=2367 echo "var1 declared as $var1" var1=var1+1 # Integer declaration eliminates the need for 'let'. echo "var1 incremented by 1 is $var1." # Attempt to change variable declared as integer echo "Attempting to change var1 to floating point value, 2367.1." var1=2367.1 # Results in error message, with no change to variable. echo "var1 is still $var1" echo declare r var2=13.36 # 'declare' permits setting a variable property #+ and simultaneously assigning it a value. echo "var2 declared as $var2" # Attempt to change readonly variable. var2=13.37 # Generates error message, and exit from script. echo "var2 is still $var2" exit 0 # This line will not execute. # Script will not exit here.

9.5. Indirect References to Variables

Assume that the value of a variable is the name of a second variable. Is it somehow possible to retrieve the value of this second variable from the first one? For example, if a=letter_of_alphabet and letter_of_alphabet=z, can a reference to a return z? This can indeed be done, and it is called an indirect reference. It uses the unusual eval var1=\$$var2 notation.

Example 921. Indirect References

#!/bin/bash # Indirect variable referencing. a=letter_of_alphabet letter_of_alphabet=z echo # Direct reference. echo "a = $a" # Indirect reference. eval a=\$$a echo "Now a = $a" echo

# Now, let's try changing the second order reference. t=table_cell_3 table_cell_3=24 echo "\"table_cell_3\" = $table_cell_3" echo n "dereferenced \"t\" = "; eval echo \$$t # In this simple case, # eval t=\$$t; echo "\"t\" = $t" # also works (why?).

Chapter 9. Variables Revisited

94

Advanced BashScripting Guide

echo t=table_cell_3 NEW_VAL=387 table_cell_3=$NEW_VAL echo "Changing value of \"table_cell_3\" to $NEW_VAL." echo "\"table_cell_3\" now $table_cell_3" echo n "dereferenced \"t\" now "; eval echo \$$t # "eval" takes the two arguments "echo" and "\$$t" (set equal to $table_cell_3) echo # (Thanks, S.C., for clearing up the above behavior.)

# Another method is the ${!t} notation, discussed in "Bash, version 2" section. # See also example "ex78.sh". exit 0

Example 922. Passing an indirect reference to awk

#!/bin/bash # Another version of the "column totaler" script # that adds up a specified column (of numbers) in the target file. # This uses indirect references. ARGS=2 E_WRONGARGS=65 if [ $# ne "$ARGS" ] # Check for proper no. of command line args. then echo "Usage: `basename $0` filename columnnumber" exit $E_WRONGARGS fi filename=$1 column_number=$2 #===== Same as original script, up to this point =====#

# A multiline awk script is invoked by

awk ' ..... '

# Begin awk script. # awk " { total += \$${column_number} # indirect reference } END { print total } " "$filename" # # End awk script.

Chapter 9. Variables Revisited

95

Advanced BashScripting Guide

# Indirect variable reference avoids the hassles # of referencing a shell variable within the embedded awk script. # Thanks, Stephane Chazelas.

exit 0

This method of indirect referencing is a bit tricky. If the second order variable changes its value, then the first order variable must be properly dereferenced (as in the above example). Fortunately, the ${!variable} notation introduced with version 2 of Bash (see Example 352) makes indirect referencing more intuitive.

9.6. $RANDOM: generate random integer

$RANDOM is an internal Bash function (not a constant) that returns a pseudorandom integer in the range 0 32767. $RANDOM should not be used to generate an encryption key.

Example 923. Generating random numbers

#!/bin/bash # $RANDOM returns a different random integer at each invocation. # Nominal range: 0 32767 (signed 16bit integer). MAXCOUNT=10 count=1 echo echo "$MAXCOUNT random numbers:" echo "" while [ "$count" le $MAXCOUNT ] # Generate 10 ($MAXCOUNT) random integers. do number=$RANDOM echo $number let "count += 1" # Increment count. done echo "" # If you need a random int within a certain range, use the 'modulo' operator. # This returns the remainder of a division operation. RANGE=500 echo number=$RANDOM let "number %= $RANGE" echo "Random number less than $RANGE echo # If you need a random int greater than a lower bound, # then set up a test to discard all numbers below that. FLOOR=200 number=0 #initialize

$number"

Chapter 9. Variables Revisited

96

Advanced BashScripting Guide

while [ "$number" le $FLOOR ] do number=$RANDOM done echo "Random number greater than $FLOOR echo

$number"

# May combine above two techniques to retrieve random number between two limits. number=0 #initialize while [ "$number" le $FLOOR ] do number=$RANDOM let "number %= $RANGE" # Scales $number down within $RANGE. done echo "Random number between $FLOOR and $RANGE $number" echo

# Generate binary choice, that is, "true" or "false" value. BINARY=2 number=$RANDOM T=1 let "number %= $BINARY" # let "number >>= 14" gives a better random distribution # (right shifts out everything except last binary digit). if [ "$number" eq $T ] then echo "TRUE" else echo "FALSE" fi echo

# May generate toss of the dice. SPOTS=7 # Modulo 7 gives range 0 6. ZERO=0 die1=0 die2=0 # Tosses each die separately, and so gives correct odds. while [ "$die1" eq $ZERO ] # Can't have a zero come up. do let "die1 = $RANDOM % $SPOTS" # Roll first one. done while [ "$die2" eq $ZERO ] do let "die2 = $RANDOM % $SPOTS" # Roll second one. done let "throw = $die1 + $die2" echo "Throw of the dice = $throw" echo

exit 0

Chapter 9. Variables Revisited

97

Advanced BashScripting Guide Example 924. Picking a random card from a deck
#!/bin/bash # pickcard.sh # This is an example of choosing a random element of an array.

# Pick a card, any card. Suites="Clubs Diamonds Hearts Spades" Denominations="2 3 4 5 6 7 8 9 10 Jack Queen King Ace" suite=($Suites) denomination=($Denominations) # Read into array variable.

num_suites=${#suite[*]} # Count how many elements. num_denominations=${#denomination[*]} echo n "${denomination[$((RANDOM%num_denominations))]} of " echo ${suite[$((RANDOM%num_suites))]}

# $bozo sh pickcards.sh # Jack of Clubs

# Thank you, "jipe," for pointing out this use of $RANDOM. exit 0

Jipe points out another set of techniques for generating random numbers within a range.
# Generate random number between 6 and 30. rnumber=$((RANDOM%25+6)) # Generate random number in the same 6 30 range, #+ but the number must be evenly divisible by 3. rnumber=$(((RANDOM%30/3+1)*3)) # Exercise: Try to figure out the pattern here.

Just how random is $RANDOM? The best way to test this is to write a script that tracks the distribution of "random" numbers generated by $RANDOM. Let's roll a $RANDOM die a few times... Chapter 9. Variables Revisited 98

Advanced BashScripting Guide Example 925. Rolling the die with RANDOM
#!/bin/bash # How random is RANDOM? RANDOM=$$ PIPS=6 MAXTHROWS=600 throw=0 zeroes=0 ones=0 twos=0 threes=0 fours=0 fives=0 sixes=0 # Reseed the random number generator using script process ID. # A die has 6 pips. # Increase this, if you have nothing better to do with your time. # Throw count. # Must initialize counts to zero. # since an uninitialized variable is null, not zero.

print_result () { echo echo "ones = $ones" echo "twos = $twos" echo "threes = $threes" echo "fours = $fours" echo "fives = $fives" echo "sixes = $sixes" echo } update_count() { case "$1" in 0) let "ones += 1";; # Since die has no "zero", this corresponds to 1. 1) let "twos += 1";; # And this to 2, etc. 2) let "threes += 1";; 3) let "fours += 1";; 4) let "fives += 1";; 5) let "sixes += 1";; esac } echo

while [ "$throw" lt "$MAXTHROWS" ] do let "die1 = RANDOM % $PIPS" update_count $die1 let "throw += 1" done print_result # # # # # The scores should distribute fairly evenly, assuming RANDOM is fairly random. With $MAXTHROWS at 600, all should cluster around 100, plusorminus 20 or so. Keep in mind that RANDOM is a pseudorandom generator, and not a spectacularly good one at that.

# Exercise (easy):

Chapter 9. Variables Revisited

99

Advanced BashScripting Guide

# # Rewrite this script to flip a coin 1000 times. # Choices are "HEADS" or "TAILS". exit 0

As we have seen in the last example, it is best to "reseed" the RANDOM generator each time it is invoked. Using the same seed for RANDOM repeats the same series of numbers. (This mirrors the behavior of the random() function in C.)

Example 926. Reseeding RANDOM

#!/bin/bash # seedingrandom.sh: Seeding the RANDOM variable. MAXCOUNT=25 # How many numbers to generate.

random_numbers () { count=0 while [ "$count" lt "$MAXCOUNT" ] do number=$RANDOM echo n "$number " let "count += 1" done } echo; echo RANDOM=1 random_numbers echo; echo RANDOM=1 random_numbers # Same seed for RANDOM... # ...reproduces the exact same number series. # # When is it useful to duplicate a "random" number series? # Setting RANDOM seeds the random number generator.

echo; echo RANDOM=2 random_numbers echo; echo # RANDOM=$$ seeds RANDOM from process id of script. # It is also possible to seed RANDOM from 'time' or 'date' commands. # Getting fancy... SEED=$(head 1 /dev/urandom | od N 1 | awk '{ print $2 }') # Pseudorandom output fetched #+ from /dev/urandom (system pseudorandom devicefile), #+ then converted to line of printable (octal) numbers by "od", #+ finally "awk" retrieves just one number for SEED. RANDOM=$SEED random_numbers # Trying again, but with a different seed... # gives a different number series.

Chapter 9. Variables Revisited

100

Advanced BashScripting Guide

echo; echo exit 0

The /dev/urandom devicefile provides a means of generating much more "random" pseudorandom numbers than the $RANDOM variable. dd if=/dev/urandom of=targetfile bs=1 count=XX creates a file of wellscattered pseudorandom numbers. However, assigning these numbers to a variable in a script requires a workaround, such as filtering through od (as in above example) or using dd (see Example 1242).

There are also other means of generating pseudorandom numbers in a script. Awk provides a convenient means of doing this.

Example 927. Pseudorandom numbers, using awk

#!/bin/bash # random2.sh: Returns a pseudorandom number in the range 0 1. # Uses the awk rand() function. AWKSCRIPT=' { srand(); print rand() } ' # Command(s) / parameters passed to awk # Note that srand() reseeds awk's random number generator. echo n "Random number between 0 and 1 = " echo | awk "$AWKSCRIPT" exit 0

# Exercises: # # 1) Using a loop construct, print out 10 different random numbers. # (Hint: you must reseed the "srand()" function with a different seed # in each pass through the loop. What happens if you fail to do this?) # 2) Using an integer multiplier as a scaling factor, generate random numbers # in the range between 10 and 100. # 3) Same as exercise #2, above, but generate random integers this time.

9.7. The Double Parentheses Construct

Similar to the let command, the ((...)) construct permits arithmetic expansion and evaluation. In its simplest form, a=$(( 5 + 3 )) would set "a" to "5 + 3", or 8. However, this double parentheses construct is also a mechanism for allowing Ctype manipulation of variables in Bash.

Example 928. Ctype manipulation of variables

#!/bin/bash # Manipulating a variable, Cstyle, using the ((...)) construct.

Chapter 9. Variables Revisited

101

Advanced BashScripting Guide

echo (( a = 23 )) # Setting a value, Cstyle, with spaces on both sides of the "=". echo "a (initial value) = $a" (( a++ )) # Postincrement 'a', Cstyle. echo "a (after a++) = $a" (( a )) # Postdecrement 'a', Cstyle. echo "a (after a) = $a"

(( ++a )) # Preincrement 'a', Cstyle. echo "a (after ++a) = $a" (( a )) # Predecrement 'a', Cstyle. echo "a (after a) = $a" echo (( t = a<45?7:11 )) # Cstyle trinary operator. echo "If a < 45, then t = 7, else t = 11." echo "t = $t " # Yes! echo

# # Easter Egg alert! # # Chet Ramey apparently snuck a bunch of undocumented Cstyle constructs #+ into Bash (actually adapted from ksh, pretty much). # In the Bash docs, Ramey calls ((...)) shell arithmetic, #+ but it goes far beyond that. # Sorry, Chet, the secret is now out. # See also "for" and "while" loops using the ((...)) construct. # These work only with Bash, version 2.04 or later. exit 0

See also Example 1012.

Chapter 9. Variables Revisited

102

Chapter 10. Loops and Branches

Operations on code blocks are the key to structured, organized shell scripts. Looping and branching constructs provide the tools for accomplishing this.

10.1. Loops
A loop is a block of code that iterates (repeats) a list of commands as long as the loop control condition is true. for loops for (in) This is the basic looping construct. It differs significantly from its C counterpart. for arg in [list] do command(s)... done During each pass through the loop, arg takes on the value of each successive variable in the list.
for arg in "$var1" # In pass 1 of the # In pass 2 of the # In pass 3 of the # ... # In pass N of the "$var2" "$var3" ... "$varN" loop, $arg = $var1 loop, $arg = $var2 loop, $arg = $var3 loop, $arg = $varN

# Arguments in [list] quoted to prevent possible word splitting.

The argument list may contain wild cards. If do is on same line as for, there needs to be a semicolon after list. for arg in [list] ; do

Example 101. Simple for loops

#!/bin/bash # List the planets. for planet in Mercury Venus Earth Mars Jupiter Saturn Uranus Neptune Pluto do echo $planet done echo # Entire 'list' enclosed in quotes creates a single variable.

Chapter 10. Loops and Branches

103

Advanced BashScripting Guide

for planet in "Mercury Venus Earth Mars Jupiter Saturn Uranus Neptune Pluto" do echo $planet done exit 0

Each [list] element may contain multiple parameters. This is useful when processing parameters in groups. In such cases, use the set command (see Example 1113) to force parsing of each [list] element and assignment of each component to the positional parameters.

Example 102. for loop with two parameters in each [list] element
#!/bin/bash # Planets revisited. # Associate the name of each planet with its distance from the sun. for planet in "Mercury 36" "Venus 67" "Earth 93" "Mars 142" "Jupiter 483" do set $planet # Parses variable "planet" and sets positional parameters. # the "" prevents nasty surprises if $planet is null or begins with a dash. # May need to save original positional parameters, since they get overwritten. # One way of doing this is to use an array, # original_params=("$@") echo "$1 #two done $2,000,000 miles from the sun" tabsconcatenate zeroes onto parameter $2

# (Thanks, S.C., for additional clarification.) exit 0

A variable may supply the [list] in a for loop.

Example 103. Fileinfo: operating on a file list contained in a variable

#!/bin/bash # fileinfo.sh FILES="/usr/sbin/privatepw /usr/sbin/pwck /usr/sbin/go500gw /usr/bin/fakefile /sbin/mkreiserfs /sbin/ypbind" # List of files you are curious about. # Threw in a dummy file, /usr/bin/fakefile. echo for file in $FILES do

Chapter 10. Loops and Branches

104

Advanced BashScripting Guide

if [ ! e "$file" ] # Check if file exists. then echo "$file does not exist."; echo continue # On to next. fi ls l $file | awk '{ print $9 " whatis `basename $file` # File info. echo done exit 0 file size: " $5 }' # Print 2 fields.

The [list] in a for loop may contain filename globbing, that is, using wildcards for filename expansion.

Example 104. Operating on files with a for loop

#!/bin/bash # listglob.sh: Generating [list] in a forloop using "globbing". echo for file in * do ls l "$file" # Lists all files in $PWD (current directory). # Recall that the wild card character "*" matches every filename, # however, in "globbing", it doesn't match dotfiles. # If the pattern matches no file, it is expanded to itself. # To prevent this, set the nullglob option # (shopt s nullglob). # Thanks, S.C. done echo; echo for file in [jx]* do rm f $file # Removes only files beginning with "j" or "x" in $PWD. echo "Removed file \"$file\"". done echo exit 0

Omitting the in [list] part of a for loop causes the loop to operate on $@, the list of arguments given on the command line to the script. A particularly clever illustration of this is Example A17.

Example 105. Missing in [list] in a for loop

#!/bin/bash # Invoke both with and without arguments, and see what happens.

Chapter 10. Loops and Branches

105

Advanced BashScripting Guide

for a do echo n "$a " done # The 'in list' missing, therefore the loop operates on '$@' #+ (commandline argument list, including whitespace). echo exit 0

It is possible to use command substitution to generate the [list] in a for loop. See also Example 1239, Example 1010 and Example 1233.

Example 106. Generating the [list] in a for loop with command substitution
#!/bin/bash # A forloop with [list] generated by command substitution. NUMBERS="9 7 3 8 37.53" for number in `echo $NUMBERS` do echo n "$number " done echo exit 0 # for number in 9 7 3 8 37.53

This is a somewhat more complex example of using command substitution to create the [list].

Example 107. A grep replacement for binary files

#!/bin/bash # bingrep.sh: Locates matching strings in a binary file. # A "grep" replacement for binary files. # Similar effect to "grep a" E_BADARGS=65 E_NOFILE=66 if [ $# ne 2 ] then echo "Usage: `basename $0` string filename" exit $E_BADARGS fi if [ ! f "$2" ] then echo "File \"$2\" does not exist." exit $E_NOFILE fi

for word in $( strings "$2" | grep "$1" )

Chapter 10. Loops and Branches

106

Advanced BashScripting Guide

# The "strings" command lists strings in binary files. # Output then piped to "grep", which tests for desired string. do echo $word done # As S.C. points out, the above forloop could be replaced with the simpler # strings "$2" | grep "$1" | tr s "$IFS" '[\n*]'

# Try something like exit 0

"./bingrep.sh mem /bin/ls"

to exercise this script.

More of the same.

Example 108. Listing all users on the system

#!/bin/bash # userlist.sh PASSWORD_FILE=/etc/passwd n=1 # User number for name in $(awk 'BEGIN{FS=":"}{print $1}' < "$PASSWORD_FILE" ) # Field separator = : ^^^^^^ # Print first field ^^^^^^^^ # Get input from password file ^^^^^^^^^^^^^^^^^ do echo "USER #$n = $name" let "n += 1" done

# # # # #

USER USER USER ... USER

#1 = root #2 = bin #3 = daemon #30 = bozo

exit 0

A final example of the [list] resulting from command substitution.

Example 109. Checking all the binaries in a directory for authorship

#!/bin/bash # findstring.sh: # Find a particular string in binaries in a specified directory. directory=/usr/bin/ fstring="Free Software Foundation"

# See which files come from the FSF.

for file in $( find $directory type f name '*' | sort ) do strings f $file | grep "$fstring" | sed e "s%$directory%%" # In the "sed" expression,

Chapter 10. Loops and Branches

107

Advanced BashScripting Guide

#+ it is necessary to substitute for the normal "/" delimiter #+ because "/" happens to be one of the characters filtered out. # Failure to do so gives an error message (try it). done exit 0 # # # #+ Exercise (easy): Convert this script to taking commandline parameters for $directory and $fstring.

The output of a for loop may be piped to a command or commands.

Example 1010. Listing the symbolic links in a directory

#!/bin/bash # symlinks.sh: Lists symbolic links in a directory.

directory=${1`pwd`} # Defaults to current working directory, #+ if not otherwise specified. # Equivalent to code block below. # # ARGS=1 # Expect one commandline argument. # # if [ $# ne "$ARGS" ] # If not 1 arg... # then # directory=`pwd` # current working directory # else # directory=$1 # fi # echo "symbolic links in directory \"$directory\"" for file in "$( find $directory type l )" do echo "$file" done | sort # #+ #+ # # type l = symbolic links

# Otherwise file list is unsorted.

As Dominik 'Aeneas' Schnitzer points out, failing to quote $( find $directory type l ) will choke on filenames with embedded whitespace. Even this will only pick up the first field of each argument.

exit 0

# Jean Helou proposes the following alternative: echo "symbolic links in directory \"$directory\"" # Backup of the current IFS. One can never be too cautious. OLDIFS=$IFS IFS=: for file in $(find $directory type l printf "%p$IFS") do # ^^^^^^^^^^^^^^^^

Chapter 10. Loops and Branches

108

Advanced BashScripting Guide

echo "$file" done|sort

The stdout of a loop may be redirected to a file, as this slight modification to the previous example shows.

Example 1011. Symbolic links in a directory, saved to a file

#!/bin/bash # symlinks.sh: Lists symbolic links in a directory. OUTFILE=symlinks.list directory=${1`pwd`} # Defaults to current working directory, #+ if not otherwise specified. # save file

echo "symbolic links in directory \"$directory\"" > "$OUTFILE" echo "" >> "$OUTFILE" for file in "$( find $directory type l )" do echo "$file" done | sort >> "$OUTFILE" # ^^^^^^^^^^^^^ exit 0 # type l = symbolic links

# stdout of loop redirected to save file.

There is an alternative syntax to a for loop that will look very familiar to C programmers. This requires double parentheses.

Example 1012. A Clike for loop

#!/bin/bash # Two ways to count up to 10. echo # Standard syntax. for a in 1 2 3 4 5 6 7 8 9 10 do echo n "$a " done echo; echo # +==========================================+ # Now, let's do the same, using Clike syntax. LIMIT=10 for ((a=1; a <= LIMIT ; a++)) do echo n "$a " # Double parentheses, and "LIMIT" with no "$".

Chapter 10. Loops and Branches

109

Advanced BashScripting Guide

done echo; echo # +=========================================================================+ # Let's use the C "comma operator" to increment two variables simultaneously. for ((a=1, b=1; a <= LIMIT ; a++, b++)) do echo n "$a$b " done echo; echo exit 0 # The comma chains together operations. # A construct borrowed from 'ksh93'.

See also Example 2610, Example 2611, and Example A7. Now, a forloop used in a "reallife" context.

Example 1013. Using efax in batch mode

#!/bin/bash EXPECTED_ARGS=2 E_BADARGS=65 if [ $# # Check then echo exit fi ne $EXPECTED_ARGS ] for proper no. of command line args. "Usage: `basename $0` phone# textfile" $E_BADARGS

if [ ! f "$2" ] then echo "File $2 is not a text file" exit $E_BADARGS fi

fax make $2 for file in $(ls $2.0*) do fil="$fil $file" done

# Create fax formatted files from text files. # Concatenate the converted files. # Uses wild card in variable list.

efax d /dev/ttyS3 o1 t "T$1" $fil

# Do the work.

# As S.C. points out, the forloop can be eliminated with # efax d /dev/ttyS3 o1 t "T$1" $2.0* # but it's not quite as instructive [grin].

Chapter 10. Loops and Branches

110

Advanced BashScripting Guide

exit 0

while This construct tests for a condition at the top of a loop, and keeps looping as long as that condition is true (returns a 0 exit status). In contrast to a for loop, a while loop finds use in situations where the number of loop repetitions is not known beforehand. while [condition] do command... done As is the case with for/in loops, placing the do on the same line as the condition test requires a semicolon. while [condition] ; do Note that certain specialized while loops, as, for example, a getopts construct, deviate somewhat from the standard template given here.

Example 1014. Simple while loop

#!/bin/bash var0=0 LIMIT=10 while [ "$var0" lt "$LIMIT" ] do echo n "$var0 " # n suppresses newline. var0=`expr $var0 + 1` # var0=$(($var0+1)) also works. done echo exit 0

Example 1015. Another while loop

#!/bin/bash echo while [ "$var1" != "end" ] # while test "$var1" != "end" do # also works. echo "Input variable #1 (end to exit) " read var1 # Not 'read $var1' (why?). echo "variable #1 = $var1" # Need quotes because of "#". # If input is 'end', echoes it here. # Does not test for termination condition until top of loop. echo done exit 0

Chapter 10. Loops and Branches

111

Advanced BashScripting Guide A while loop may have multiple conditions. Only the final condition determines when the loop terminates. This necessitates a slightly different loop syntax, however.

Example 1016. while loop with multiple conditions

#!/bin/bash var1=unset previous=$var1 while echo "previousvariable = $previous" echo previous=$var1 [ "$var1" != end ] # Keeps track of what $var1 was previously. # Four conditions on "while", but only last one controls loop. # The *last* exit status is the one that counts. do echo "Input variable #1 (end to exit) " read var1 echo "variable #1 = $var1" done # Try to figure out how this all works. # It's a wee bit tricky. exit 0

As with a for loop, a while loop may employ Clike syntax by using the double parentheses construct (see also Example 928).

Example 1017. Clike syntax in a while loop

#!/bin/bash # whloopc.sh: Count to 10 in a "while" loop. LIMIT=10 a=1 while [ "$a" le $LIMIT ] do echo n "$a " let "a+=1" done # No surprises, so far. echo; echo # +=================================================================+ # Now, repeat with Clike syntax. ((a = 1)) # a=1 # Double parentheses permit space when setting a variable, as in C. while (( a <= LIMIT )) # Double parentheses, and no "$" preceding variables. do echo n "$a " ((a += 1)) # let "a+=1"

Chapter 10. Loops and Branches

112

Advanced BashScripting Guide

# Yes, indeed. # Double parentheses permit incrementing a variable with Clike syntax. done echo # Now, C programmers can feel right at home in Bash. exit 0

A while loop may have its stdin redirected to a file by a < at its end. until This construct tests for a condition at the top of a loop, and keeps looping as long as that condition is false (opposite of while loop). until [conditionistrue] do command... done Note that an until loop tests for the terminating condition at the top of the loop, differing from a similar construct in some programming languages. As is the case with for/in loops, placing the do on the same line as the condition test requires a semicolon. until [conditionistrue] ; do

Example 1018. until loop

#!/bin/bash until [ "$var1" = end ] # Tests condition here, at top of loop. do echo "Input variable #1 " echo "(end to exit)" read var1 echo "variable #1 = $var1" done exit 0

10.2. Nested Loops

A nested loop is a loop within a loop, an inner loop within the body of an outer one. What happens is that the first pass of the outer loop triggers the inner loop, which executes to completion. Then the second pass of the outer loop triggers the inner loop again. This repeats until the outer loop finishes. Of course, a break within either the inner or outer loop may interrupt this process.

Example 1019. Nested Loop

Chapter 10. Loops and Branches

113

Advanced BashScripting Guide

#!/bin/bash # Nested "for" loops. outer=1 # Set outer loop counter.

# Beginning of outer loop. for a in 1 2 3 4 5 do echo "Pass $outer in outer loop." echo "" inner=1 # Reset inner loop counter. # Beginning of inner loop. for b in 1 2 3 4 5 do echo "Pass $inner in inner loop." let "inner+=1" # Increment inner loop counter. done # End of inner loop. let "outer+=1" # Increment outer loop counter. echo # Space between output in pass of outer loop. done # End of outer loop. exit 0

See Example 266 for an illustration of nested "while" loops, and Example 268 to see a "while" loop nested inside an "until" loop.

10.3. Loop Control

Commands Affecting Loop Behavior break, continue The break and continue loop control commands [23] correspond exactly to their counterparts in other programming languages. The break command terminates the loop (breaks out of it), while continue causes a jump to the next iteration of the loop, skipping all the remaining commands in that particular loop cycle.

Example 1020. Effects of break and continue in a loop

#!/bin/bash LIMIT=19 # Upper limit

echo echo "Printing Numbers 1 through 20 (but not 3 and 11)." a=0 while [ $a le "$LIMIT" ] do a=$(($a+1)) if [ "$a" eq 3 ] || [ "$a" eq 11 ] # Excludes 3 and 11

Chapter 10. Loops and Branches

114

Advanced BashScripting Guide

then continue fi # Skip rest of this particular loop iteration.

echo n "$a " done # Exercise: # Why does loop print up to 20? echo; echo echo Printing Numbers 1 through 20, but something happens after 2. ################################################################## # Same loop, but substituting 'break' for 'continue'. a=0 while [ "$a" le "$LIMIT" ] do a=$(($a+1)) if [ "$a" gt 2 ] then break # Skip entire rest of loop. fi echo n "$a " done echo; echo; echo exit 0

The break command may optionally take a parameter. A plain break terminates only the innermost loop in which it is embedded, but a break N breaks out of N levels of loop.

Example 1021. Breaking out of multiple loop levels

#!/bin/bash # breaklevels.sh: Breaking out of loops. # "break N" breaks out of N level loops. for outerloop in 1 2 3 4 5 do echo n "Group $outerloop: for innerloop in 1 2 3 4 5 do echo n "$innerloop " if [ "$innerloop" eq 3 ] then break # Try break 2 to see what happens. # ("Breaks" out of both inner and outer loops.) fi

"

Chapter 10. Loops and Branches

115

Advanced BashScripting Guide

done echo done echo exit 0

The continue command, similar to break, optionally takes a parameter. A plain continue cuts short the current iteration within its loop and begins the next. A continue N terminates all remaining iterations at its loop level and continues with the next iteration at the loop N levels above.

Example 1022. Continuing at a higher loop level

#!/bin/bash # The "continue N" command, continuing at the Nth level loop. for outer in I II III IV V do echo; echo n "Group $outer: " for inner in 1 2 3 4 5 6 7 8 9 10 do # outer loop

# inner loop

if [ "$inner" eq 7 ] then continue 2 # Continue at loop on 2nd level, that is "outer loop". # Replace above line with a simple "continue" # to see normal loop behavior. fi echo n "$inner " done done echo; echo # Exercise: # Come up with a meaningful use for "continue N" in a script. exit 0 # 8 9 10 will never echo.

Example 1023. Using "continue N" in an actual task

# Albert Reiner gives an example of how to use "continue N": # # #+ #+ #+ #+ Suppose I have a large number of jobs that need to be run, with any data that is to be treated in files of a given name pattern in a directory. There are several machines that access this directory, and I want to distribute the work over these different boxen. Then I usually nohup something like the following on every box:

while true do

Chapter 10. Loops and Branches

116

Advanced BashScripting Guide

for n in .iso.* do [ "$n" = ".iso.opts" ] && continue beta=${n#.iso.} [ r .Iso.$beta ] && continue [ r .lock.$beta ] && sleep 10 && continue lockfile r0 .lock.$beta || continue echo n "$beta: " `date` runisotherm $beta date ls alF .Iso.$beta [ r .Iso.$beta ] && rm f .lock.$beta continue 2 done break done # The details, in particular the sleep N, are particular to my #+ application, but the general pattern is: while true do for job in {pattern} do {job already done or running} && continue {mark job as running, do job, mark job as done} continue 2 done break # Or something like `sleep 600' to avoid termination. done # #+ #+ #+ #+ #+ #+ #+ #+ #+ #+ This way the script will stop only when there are no more jobs to do (including jobs that were added during runtime). Through the use of appropriate lockfiles it can be run on several machines concurrently without duplication of calculations [which run a couple of hours in my case, so I really want to avoid this]. Also, as search always starts again from the beginning, one can encode priorities in the file names. Of course, one could also do this without `continue 2', but then one would have to actually check whether or not some job was done (so that we should immediately look for the next job) or not (in which case we terminate or sleep for a long time before checking for a new job).

The continue N construct is difficult to understand and tricky to use in any meaningful context. It is probably best avoided.

10.4. Testing and Branching

The case and select constructs are technically not loops, since they do not iterate the execution of a code block. Like loops, however, they direct program flow according to conditions at the top or bottom of the block. Controlling program flow in a code block case (in) / esac The case construct is the shell equivalent of switch in C/C++. It permits branching to one of a number of code blocks, depending on condition tests. It serves as a kind of shorthand for multiple if/then/else Chapter 10. Loops and Branches 117

Advanced BashScripting Guide statements and is an appropriate tool for creating menus. case "$variable" in "$condition1" ) command... ;; "$condition2" ) command... ;; esac

Quoting the variables is not mandatory, since word splitting does not take place. Each test line ends with a right paren ). Each condition block ends with a double semicolon ;;. The entire case block terminates with an esac (case spelled backwards).

Example 1024. Using case

#!/bin/bash echo; echo "Hit a key, then hit return." read Keypress case "$Keypress" in [az] ) echo "Lowercase letter";; [AZ] ) echo "Uppercase letter";; [09] ) echo "Digit";; * ) echo "Punctuation, whitespace, or other";; esac # Allows ranges of characters in [square brackets]. # # # # # # Exercise: As the script stands, # it accepts a single keystroke, then terminates. Change the script so it accepts continuous input, reports on each keystroke, and terminates only when "X" is hit. Hint: enclose everything in a "while" loop.

exit 0

Example 1025. Creating menus using case

#!/bin/bash # Crude address database clear # Clear the screen. echo " Contact List"

Chapter 10. Loops and Branches

118

Advanced BashScripting Guide

echo echo echo echo echo echo echo echo " " "Choose one of the following persons:" "[E]vans, Roland" "[J]ones, Mildred" "[S]mith, Julie" "[Z]ane, Morris"

read person case "$person" in # Note variable is quoted. "E" | "e" ) # Accept upper or lowercase input. echo echo "Roland Evans" echo "4321 Floppy Dr." echo "Hardscrabble, CO 80753" echo "(303) 7349874" echo "(303) 7349892 fax" echo "[email protected]" echo "Business partner & old friend" ;; # Note double semicolon to terminate each option. "J" | "j" ) echo echo "Mildred Jones" echo "249 E. 7th St., Apt. 19" echo "New York, NY 10009" echo "(212) 5332814" echo "(212) 5339972 fax" echo "[email protected]" echo "Girlfriend" echo "Birthday: Feb. 11" ;; # Add info for Smith & Zane later. * ) # Default option. # Empty input (hitting RETURN) fits here, too. echo echo "Not yet in database." ;; esac echo # # # #+ Exercise: Change the script so it accepts continuous input, instead of terminating after displaying just one address.

exit 0

An exceptionally clever use of case involves testing for commandline parameters.

Chapter 10. Loops and Branches

119

Advanced BashScripting Guide

#! /bin/bash case "$1" in "") echo "Usage: ${0##*/} <filename>"; exit 65;;

# No commandline parameters, # or first parameter empty. # Note that ${0##*/} is ${var##pattern} param substitution. Net result is $0. *) FILENAME=./$1;; # If filename passed as argument ($1) starts with a dash, # replace it with ./$1 # so further commands don't interpret it as an option. # Otherwise, $1.

* ) FILENAME=$1;; esac

Example 1026. Using command substitution to generate the case variable

#!/bin/bash # Using command substitution to generate a "case" variable. case i386 i486 i586 i686 * esac $( arch ) in # "arch" returns machine architecture. ) echo "80386based machine";; ) echo "80486based machine";; ) echo "Pentiumbased machine";; ) echo "Pentium2+based machine";; ) echo "Other type of machine";;

exit 0

A case construct can filter strings for globbing patterns.

Example 1027. Simple string matching

#!/bin/bash # matchstring.sh: simple string matching match_string () { MATCH=0 NOMATCH=90 PARAMS=2 # Function requires 2 arguments. BAD_PARAMS=91 [ $# eq $PARAMS ] || return $BAD_PARAMS case "$1" in "$2") return $MATCH;; * ) return $NOMATCH;; esac }

a=one b=two c=three d=two

Chapter 10. Loops and Branches

120

Advanced BashScripting Guide

match_string $a echo $? match_string $a $b echo $? match_string $b $d echo $?

# wrong number of parameters # 91 # no match # 90 # match # 0

exit 0

Example 1028. Checking for alphabetic input

#!/bin/bash # isalpha.sh: Using a "case" structure to filter a string. SUCCESS=0 FAILURE=1 isalpha () # Tests whether *first character* of input string is alphabetic. { if [ z "$1" ] # No argument passed? then return $FAILURE fi case "$1" in [azAZ]*) return $SUCCESS;; # Begins with a letter? * ) return $FAILURE;; esac } # Compare this with "isalpha ()" function in C.

isalpha2 () # Tests whether *entire string* is alphabetic. { [ $# eq 1 ] || return $FAILURE case $1 in *[!azAZ]*|"") return $FAILURE;; *) return $SUCCESS;; esac } isdigit () # Tests whether *entire string* is numerical. { # In other words, tests for integer variable. [ $# eq 1 ] || return $FAILURE case $1 in *[!09]*|"") return $FAILURE;; *) return $SUCCESS;; esac }

check_var () {

# Frontend to isalpha ().

Chapter 10. Loops and Branches

121

Advanced BashScripting Guide

if isalpha "$@" then echo "\"$*\" begins with an alpha character." if isalpha2 "$@" then # No point in testing if first char is nonalpha. echo "\"$*\" contains only alpha characters." else echo "\"$*\" contains at least one nonalpha character." fi else echo "\"$*\" begins with a nonalpha character." # Also "nonalpha" if no argument passed. fi echo } digit_check () # Frontend to isdigit (). { if isdigit "$@" then echo "\"$*\" contains only digits [0 9]." else echo "\"$*\" has at least one nondigit character." fi echo } a=23skidoo b=H3llo c=What? d=What? e=`echo $b` f=AbcDef g=27234 h=27a34 i=27.34

# Command substitution.

check_var $a check_var $b check_var $c check_var $d check_var $e check_var $f check_var # No argument passed, so what happens? # digit_check $g digit_check $h digit_check $i

exit 0

# Script improved by S.C.

# Exercise: # # Write an 'isfloat ()' function that tests for floating point numbers. # Hint: The function duplicates 'isdigit ()', #+ but adds a test for a mandatory decimal point.

select Chapter 10. Loops and Branches 122

Advanced BashScripting Guide The select construct, adopted from the Korn Shell, is yet another tool for building menus. select variable [in list] do command... break done This prompts the user to enter one of the choices presented in the variable list. Note that select uses the PS3 prompt (#? ) by default, but that this may be changed.

Example 1029. Creating menus using select

#!/bin/bash PS3='Choose your favorite vegetable: ' # Sets the prompt string. echo select vegetable in "beans" "carrots" "potatoes" "onions" "rutabagas" do echo echo "Your favorite veggie is $vegetable." echo "Yuck!" echo break # if no 'break' here, keeps looping forever. done exit 0

If in list is omitted, then select uses the list of command line arguments ($@) passed to the script or to the function in which the select construct is embedded. Compare this to the behavior of a for variable [in list] construct with the in list omitted. Example 1030. Creating menus using select in a function
#!/bin/bash PS3='Choose your favorite vegetable: ' echo choice_of() { select vegetable # [in list] omitted, so 'select' uses arguments passed to function. do echo echo "Your favorite veggie is $vegetable." echo "Yuck!"

Chapter 10. Loops and Branches

123

Advanced BashScripting Guide

echo break done } choice_of beans rice carrots radishes tomatoes spinach # $1 $2 $3 $4 $5 $6 # passed to choice_of() function exit 0

See also Example 353.

Chapter 10. Loops and Branches

124

Chapter 11. Internal Commands and Builtins

A builtin is a command contained within the Bash tool set, literally built in. This is either for performance reasons builtins execute faster than external commands, which usually require forking off a separate process or because a particular builtin needs direct access to the shell internals.

When a command or the shell itself initiates (or spawns) a new subprocess to carry out a task, this is called forking. This new process is the "child", and the process that forked it off is the "parent". While the child process is doing its work, the parent process is still executing. Generally, a Bash builtin does not fork a subprocess when it executes within a script. An external system command or filter in a script usually will fork a subprocess. A builtin may be a synonym to a system command of the same name, but Bash reimplements it internally. For example, the Bash echo command is not the same as /bin/echo, although their behavior is almost identical.
#!/bin/bash echo "This line uses the \"echo\" builtin." /bin/echo "This line uses the /bin/echo system command."

A keyword is a reserved word, token or operator. Keywords have a special meaning to the shell, and indeed are the building blocks of the shell's syntax. As examples, "for", "while", "do", and "!" are keywords. Similar to a builtin, a keyword is hardcoded into Bash, but unlike a builtin, a keyword is not by itself a command, but part of a larger command structure. [24] I/O echo prints (to stdout) an expression or variable (see Example 41).
echo Hello echo $a

An echo requires the e option to print escaped characters. See Example 52. Normally, each echo command prints a terminal newline, but the n option suppresses this. An echo can be used to feed a sequence of commands down a pipe.
if echo "$VAR" | grep q txt # if [[ $VAR = *txt* ]] then echo "$VAR contains the substring sequence \"txt\"" fi

An echo, in combination with command substitution can set a variable.

Chapter 11. Internal Commands and Builtins

125

Advanced BashScripting Guide a=`echo "HELLO" | tr AZ az` See also Example 1215, Example 122, Example 1232, and Example 1233. Be aware that echo `command` deletes any linefeeds that the output of command generates. The $IFS (internal field separator) variable normally contains \n (linefeed) as one of its set of whitespace characters. Bash therefore splits the output of command at linefeeds into arguments to echo. Then echo outputs these arguments, separated by spaces.
bash$ ls l /usr/share/apps/kjezz/sounds rwrr 1 root root 1407 Nov 7 2000 reflect.au rwrr 1 root root 362 Nov 7 2000 seconds.au

bash$ echo `ls l /usr/share/apps/kjezz/sounds` total 40 rwrr 1 root root 716 Nov 7 2000 reflect.au rwrr 1 root root 362 Nov 7

This command is a shell builtin, and not the same as /bin/echo, although its behavior is similar.
bash$ type a echo echo is a shell builtin echo is /bin/echo

printf The printf, formatted print, command is an enhanced echo. It is a limited variant of the C language printf() library function, and its syntax is somewhat different. printf formatstring... parameter... This is the Bash builtin version of the /bin/printf or /usr/bin/printf command. See the printf manpage (of the system command) for indepth coverage. Older versions of Bash may not support printf.

Example 111. printf in action

#!/bin/bash # printf demo PI=3.14159265358979 DecimalConstant=31373 Message1="Greetings," Message2="Earthling." echo printf "Pi to 2 decimal places = %1.2f" $PI echo

Chapter 11. Internal Commands and Builtins

126

Advanced BashScripting Guide

printf "Pi to 9 decimal places = %1.9f" $PI printf "\n" # It even rounds off correctly. # Prints a line feed, # equivalent to 'echo'. # Inserts tab (\t)

printf "Constant = \t%d\n" $DecimalConstant printf "%s %s \n" $Message1 $Message2 echo # ==========================================# # Simulation of C function, 'sprintf'. # Loading a variable with a formatted string. echo Pi12=$(printf "%1.12f" $PI) echo "Pi to 12 decimal places = $Pi12" Msg=`printf "%s %s \n" $Message1 $Message2` echo $Msg; echo $Msg

# As it happens, the 'sprintf' function can now be accessed # as a loadable module to Bash, but this is not portable. exit 0

Formatting error messages is a useful application of printf

E_BADDIR=65 var=nonexistent_directory error() { printf "$@" >&2 # Formats positional params passed, and sents them to stderr. echo exit $E_BADDIR } cd $var || error $"Can't cd to %s." "$var" # Thanks, S.C.

read "Reads" the value of a variable from stdin, that is, interactively fetches input from the keyboard. The a option lets read get array variables (see Example 263).

Example 112. Variable assignment, using read

#!/bin/bash echo n "Enter the value of variable 'var1': " # The n option to echo suppresses newline. read var1 # Note no '$' in front of var1, since it is being set.

Chapter 11. Internal Commands and Builtins

127

Advanced BashScripting Guide

echo "var1 = $var1"

echo # A single 'read' statement can set multiple variables. echo n "Enter the values of variables 'var2' and 'var3' (separated by a space or tab): " read var2 var3 echo "var2 = $var2 var3 = $var3" # If you input only one value, the other variable(s) will remain unset (null). exit 0

A read without an associated variable assigns its input to the dedicated variable $REPLY.

Example 113. What happens when read has no variable

#!/bin/bash echo # # # First code block. echo n "Enter a value: " read var echo "\"var\" = "$var"" # Everything as expected here. # # echo echo n "Enter another value: " read # No variable supplied for 'read', therefore... #+ Input to 'read' assigned to default variable, $REPLY. var="$REPLY" echo "\"var\" = "$var"" # This is equivalent to the first code block. echo exit 0

Normally, inputting a \ suppresses a newline during input to a read. The r option causes an inputted \ to be interpreted literally.

Example 114. Multiline input to read

#!/bin/bash echo echo "Enter a string terminated by a \\, then press <ENTER>." echo "Then, enter a second string, and again press <ENTER>." read var1 # The "\" suppresses the newline, when reading "var1". # first line \ # second line

Chapter 11. Internal Commands and Builtins

128

Advanced BashScripting Guide

echo "var1 = $var1" # var1 = first line second line # For each line terminated by a "\", # you get a prompt on the next line to continue feeding characters into var1. echo; echo echo "Enter another string terminated by a \\ , then press <ENTER>." read r var2 # The r option causes the "\" to be read literally. # first line \ echo "var2 = $var2" # var2 = first line \ # Data entry terminates with the first <ENTER>. echo exit 0

The read command has some interesting options that permit echoing a prompt and even reading keystrokes without hitting ENTER.
# Read a keypress without hitting ENTER. read s n1 p "Hit a key " keypress echo; echo "Keypress was "\"$keypress\""." # s option means do not echo input. # n N option means accept only N characters of input. # p option means echo the following prompt before reading input. # Using these options is tricky, since they need to be in the correct order.

The n option to read also allows detection of the arrow keys and certain of the other unusual keys.

Example 115. Detecting the arrow keys

#!/bin/bash # arrowdetect.sh: Detects the arrow keys, and a few more. # Thank you, Sandro Magi, for showing me how. # # Character codes generated by the keypresses. arrowup='\[A' arrowdown='\[B' arrowrt='\[C' arrowleft='\[D' insert='\[2' delete='\[3' # SUCCESS=0 OTHER=65 echo n "Press a key... "

Chapter 11. Internal Commands and Builtins

129

Advanced BashScripting Guide

# May need to also press ENTER if a key not listed above pressed. read n3 key # Read 3 characters. echo n "$key" | grep "$arrowup" if [ "$?" eq $SUCCESS ] then echo "Uparrow key pressed." exit $SUCCESS fi echo n "$key" | grep "$arrowdown" if [ "$?" eq $SUCCESS ] then echo "Downarrow key pressed." exit $SUCCESS fi echo n "$key" | grep "$arrowrt" if [ "$?" eq $SUCCESS ] then echo "Rightarrow key pressed." exit $SUCCESS fi echo n "$key" | grep "$arrowleft" if [ "$?" eq $SUCCESS ] then echo "Leftarrow key pressed." exit $SUCCESS fi echo n "$key" | grep "$insert" if [ "$?" eq $SUCCESS ] then echo "\"Insert\" key pressed." exit $SUCCESS fi echo n "$key" | grep "$delete" if [ "$?" eq $SUCCESS ] then echo "\"Delete\" key pressed." exit $SUCCESS fi #Check if character code detected.

echo " Some other key pressed." exit $OTHER # # # #+ # Exercises: 1) Simplify this script by rewriting the multiple "if" tests as a 'case' construct. 2) Add detection of the "Home," "End," "PgUp," and "PgDn" keys.

The t option to read permits timed input (see Example 94). The read command may also "read" its variable value from a file redirected to stdin. If the file contains more than one line, only the first line is assigned to the variable. If read has more than one Chapter 11. Internal Commands and Builtins 130

Advanced BashScripting Guide parameter, then each of these variables gets assigned a successive whitespacedelineated string. Caution!

Example 116. Using read with file redirection

#!/bin/bash read var1 <datafile echo "var1 = $var1" # var1 set to the entire first line of the input file "datafile" read var2 var3 <datafile echo "var2 = $var2 var3 = $var3" # Note nonintuitive behavior of "read" here. # 1) Rewinds back to the beginning of input file. # 2) Each variable is now set to a corresponding string, # separated by whitespace, rather than to an entire line of text. # 3) The final variable gets the remainder of the line. # 4) If there are more variables to be set than whitespaceterminated strings # on the first line of the file, then the excess variables remain empty. echo "" # How to resolve the above problem with a loop: while read line do echo "$line" done <datafile # Thanks, Heiner Steven for pointing this out. echo "" # Use $IFS (Internal File Separator variable) to split a line of input to # "read", if you do not want the default to be whitespace. echo "List of all users:" OIFS=$IFS; IFS=: # /etc/passwd uses ":" for field separator. while read name passwd uid gid fullname ignore do echo "$name ($fullname)" done </etc/passwd # I/O redirection. IFS=$OIFS # Restore originial $IFS. # This code snippet also by Heiner Steven.

# Setting the $IFS variable within the loop itself #+ eliminates the need for storing the original $IFS #+ in a temporary variable. # Thanks, Dim Segebart, for pointing this out. echo "" echo "List of all users:" while IFS=: read name passwd uid gid fullname ignore do echo "$name ($fullname)" done </etc/passwd # I/O redirection. echo echo "\$IFS still $IFS"

Chapter 11. Internal Commands and Builtins

131

Advanced BashScripting Guide

exit 0

Piping output to a read, using echo to set variables will fail. However, piping the output of cat does seem to work.
cat file1 file2 | while read line do echo $line done

Filesystem cd The familiar cd change directory command finds use in scripts where execution of a command requires being in a specified directory.
(cd /source/directory && tar cf . ) | (cd /dest/directory && tar xpvf )

[from the previously cited example by Alan Cox] The P (physical) option to cd causes it to ignore symbolic links. cd changes to $OLDPWD, the previous working directory.

The cd command does not function as expected when presented with two forward slashes.
bash$ cd // bash$ pwd //

The output should, of course, be /. This is a problem both from the command line and in a script. pwd Print Working Directory. This gives the user's (or script's) current directory (see Example 117). The effect is identical to reading the value of the builtin variable $PWD. pushd, popd, dirs This command set is a mechanism for bookmarking working directories, a means of moving back and forth through directories in an orderly manner. A pushdown stack is used to keep track of directory names. Options allow various manipulations of the directory stack. pushd dirname pushes the path dirname onto the directory stack and simultaneously changes the current working directory to dirname popd removes (pops) the top directory path name off the directory stack and simultaneously changes the current working directory to that directory popped from the stack.

Chapter 11. Internal Commands and Builtins

132

Advanced BashScripting Guide dirs lists the contents of the directory stack (compare this with the $DIRSTACK variable). A successful pushd or popd will automatically invoke dirs. Scripts that require various changes to the current working directory without hardcoding the directory name changes can make good use of these commands. Note that the implicit $DIRSTACK array variable, accessible from within a script, holds the contents of the directory stack.

Example 117. Changing the current working directory

#!/bin/bash dir1=/usr/local dir2=/var/spool pushd $dir1 # Will do an automatic 'dirs' (list directory stack to stdout). echo "Now in directory `pwd`." # Uses backquoted 'pwd'. # Now, do some stuff in directory 'dir1'. pushd $dir2 echo "Now in directory `pwd`." # Now, do some stuff in directory 'dir2'. echo "The top entry in the DIRSTACK array is $DIRSTACK." popd echo "Now back in directory `pwd`." # Now, do some more stuff in directory 'dir1'. popd echo "Now back in original working directory `pwd`." exit 0

Variables let The let command carries out arithmetic operations on variables. In many cases, it functions as a less complex version of expr.

Example 118. Letting let do some arithmetic.

#!/bin/bash echo let a=11 let a=a+5 echo "11 + 5 = $a" let "a <<= 3" # Equivalent to let "a = a << 3" echo "\"\$a\" (=16) leftshifted 3 places = $a" let "a /= 4" # Equivalent to echo "128 / 4 = $a" let "a = a / 4" # Same as 'a=11' # Equivalent to let "a = a + 5" # (double quotes and spaces make it more readable)

Chapter 11. Internal Commands and Builtins

133

Advanced BashScripting Guide

let "a = 5" # Equivalent to echo "32 5 = $a" let "a = a * 10" # Equivalent to echo "27 * 10 = $a" let "a = a 5"

let "a = a * 10"

let "a %= 8" # Equivalent to let "a = a % 8" echo "270 modulo 8 = $a (270 / 8 = 33, remainder $a)" echo exit 0

eval eval arg1 [arg2] ... [argN] Translates into commands the arguments in a list (useful for code generation within a script).

Example 119. Showing the effect of eval

#!/bin/bash y=`eval ls l` echo $y echo echo "$y" echo; echo y=`eval df` echo $y # Similar to y=`df` # but linefeeds removed. # Similar to y=`ls l` # but linefeeds removed because "echoed" variable is unquoted. # Linefeeds preserved when variable is quoted.

# When LF's not preserved, it may make it easier to parse output, #+ using utilities such as "awk". exit 0

Example 1110. Forcing a logoff

#!/bin/bash y=`eval ps ax | sed n '/ppp/p' | awk '{ print $1 }'` # Finding the process number of 'ppp'. kill 9 $y # Killing it

# Above lines may be replaced by # kill 9 `ps ax | awk '/ppp/ { print $1 }'

chmod 666 /dev/ttyS3 # Doing a SIGKILL on ppp changes the permissions # on the serial port. Restore them to previous state. rm /var/lock/LCK..ttyS3 exit 0 # Remove the serial port lock file.

Chapter 11. Internal Commands and Builtins

134

Advanced BashScripting Guide Example 1111. A version of "rot13"

#!/bin/bash # A version of "rot13" using 'eval'. # Compare to "rot13.sh" example. setvar_rot_13() # "rot13" scrambling { local varname=$1 varvalue=$2 eval $varname='$(echo "$varvalue" | tr az nzam)' }

setvar_rot_13 var "foobar" echo $var echo $var | tr az nzam

# Run "foobar" through rot13. # sbbone # foobar # Back to original variable.

# This example by Stephane Chazelas. exit 0

Rory Winston contributed the following instance of how useful eval can be.

Example 1112. Using eval to force variable substitution in a Perl script

In the Perl script "test.pl": ... my $WEBROOT = <WEBROOT_PATH>; ... To force variable substitution try: $export WEBROOT_PATH=/usr/local/webroot $sed 's/<WEBROOT_PATH>/$WEBROOT_PATH/' < test.pl > out But this just gives: my $WEBROOT = $WEBROOT_PATH; However: $export WEBROOT_PATH=/usr/local/webroot $eval sed 's/<WEBROOT_PATH>/$WEBROOT_PATH/' < test.pl > out # ==== That works fine, and gives the expected substitution: my $WEBROOT = /usr/local/webroot

The eval command can be risky, and normally should be avoided when there exists a reasonable alternative. An eval $COMMANDS executes the contents of COMMANDS, which may contain such unpleasant surprises as rm rf *. Running an eval on unfamiliar code written by persons unknown is living dangerously. set The set command changes the value of internal script variables. One use for this is to toggle option flags which help determine the behavior of the script. Another application for it is to reset the positional parameters that a script sees as the result of a command (set `command`). The script can then parse the fields of the command output. Chapter 11. Internal Commands and Builtins 135

Advanced BashScripting Guide Example 1113. Using set with positional parameters
#!/bin/bash # script "settest" # Invoke this script with three command line parameters, # for example, "./settest one two three". echo echo echo echo echo

"Positional parameters "Commandline argument "Commandline argument "Commandline argument

before set \`uname a\` :" #1 = $1" #2 = $2" #3 = $3"

set `uname a` # Sets the positional parameters to the output # of the command `uname a` echo $_ # unknown # Flags set in script. echo "Positional parameters after set \`uname a\` :" # $1, $2, $3, etc. reinitialized to result of `uname a` echo "Field #1 of 'uname a' = $1" echo "Field #2 of 'uname a' = $2" echo "Field #3 of 'uname a' = $3" echo echo $_ # echo exit 0

Invoking set without any options or arguments simply lists all the environmental and other variables that have been initialized.
bash$ set AUTHORCOPY=/home/bozo/posts BASH=/bin/bash BASH_VERSION=$'2.05.8(1)release' ... XAUTHORITY=/home/bozo/.Xauthority _=/etc/bashrc variable22=abc variable23=xzy

Using set with the option explicitly assigns the contents of a variable to the positional parameters. When no variable follows the , it unsets the positional parameters.

Example 1114. Reassigning the positional parameters

#!/bin/bash variable="one two three four five" set $variable # Sets positional parameters to the contents of "$variable".

Chapter 11. Internal Commands and Builtins

136

Advanced BashScripting Guide

first_param=$1 second_param=$2 shift; shift # Shift past first two positional params. remaining_params="$*" echo echo "first parameter = $first_param" echo "second parameter = $second_param" echo "remaining parameters = $remaining_params" echo; echo # Again. set $variable first_param=$1 second_param=$2 echo "first parameter = $first_param" echo "second parameter = $second_param"

# one # two # three four five

# one # two

# ====================================================== set # Unsets positional parameters if no variable specified. first_param=$1 second_param=$2 echo "first parameter = $first_param" echo "second parameter = $second_param" exit 0

# (null value) # (null value)

See also Example 102 and Example 1240. unset The unset command deletes a shell variable, effectively setting it to null. Note that this command does not affect positional parameters.
bash$ unset PATH bash$ echo $PATH bash$

Example 1115. "Unsetting" a variable

#!/bin/bash # unset.sh: Unsetting a variable. variable=hello echo "variable = $variable" unset variable echo "(unset) variable = $variable" exit 0 # Initialized.

# Unset. # Same effect as variable= # $variable is null.

export

Chapter 11. Internal Commands and Builtins

137

Advanced BashScripting Guide The export command makes available variables to all child processes of the running script or shell. Unfortunately, there is no way to export variables back to the parent process, to the process that called or invoked the script or shell. One important use of export command is in startup files, to initialize and make accessible environmental variables to subsequent user processes.

Example 1116. Using export to pass a variable to an embedded awk script

#!/bin/bash # Yet another version of the "column totaler" script (coltotaler.sh) # that adds up a specified column (of numbers) in the target file. # This uses the environment to pass a script variable to 'awk'. ARGS=2 E_WRONGARGS=65 if [ $# ne "$ARGS" ] # Check for proper no. of command line args. then echo "Usage: `basename $0` filename columnnumber" exit $E_WRONGARGS fi filename=$1 column_number=$2 #===== Same as original script, up to this point =====# export column_number # Export column number to environment, so it's available for retrieval.

# Begin awk script. # awk '{ total += $ENVIRON["column_number"] } END { print total }' $filename # # End awk script.

# Thanks, Stephane Chazelas. exit 0

It is possible to initialize and export variables in the same operation, as in export var1=xxx. However, as Greg Keraunen points out, in certain situations this may have a different effect than setting a variable, then exporting it.
bash$ export var=(a b); echo ${var[0]} (a b)

bash$ var=(a b); export var; echo ${var[0]} a

Chapter 11. Internal Commands and Builtins

138

Advanced BashScripting Guide

declare, typeset The declare and typeset commands specify and/or restrict properties of variables. readonly Same as declare r, sets a variable as readonly, or, in effect, as a constant. Attempts to change the variable fail with an error message. This is the shell analog of the C language const type qualifier. getopts This powerful tool parses commandline arguments passed to the script. This is the Bash analog of the getopt external command and the getopt library function familiar to C programmers. It permits passing and concatenating multiple options [25] and associated arguments to a script (for example scriptname abc e /usr/local). The getopts construct uses two implicit variables. $OPTIND is the argument pointer (OPTion INDex) and $OPTARG (OPTion ARGument) the (optional) argument attached to an option. A colon following the option name in the declaration tags that option as having an associated argument. A getopts construct usually comes packaged in a while loop, which processes the options and arguments one at a time, then decrements the implicit $OPTIND variable to step to the next.

1. The arguments passed from the command line to the script must be preceded by a minus () or a plus (+). It is the prefixed or + that lets getopts recognize commandline arguments as options. In fact, getopts will not process arguments without the prefixed or +, and will terminate option processing at the first argument encountered lacking them. 2. The getopts template differs slightly from the standard while loop, in that it lacks condition brackets. 3. The getopts construct replaces the obsolete and less powerful getopt external command.
while getopts ":abcde:fg" Option # Initial declaration. # a, b, c, d, e, f, and g are the options (flags) expected. # The : after option 'e' shows it will have an argument passed with it. do case $Option in a ) # Do something with variable 'a'. b ) # Do something with variable 'b'. ... e) # Do something with 'e', and also with $OPTARG, # which is the associated argument passed with option 'e'. ... g ) # Do something with variable 'g'. esac done shift $(($OPTIND 1)) # Move argument pointer to next. # All this is not nearly as complicated as it looks <grin>.

Example 1117. Using getopts to read the options/arguments passed to a script

Chapter 11. Internal Commands and Builtins

139

Advanced BashScripting Guide

#!/bin/bash # 'getopts' processes command line arguments to script. # The arguments are parsed as "options" (flags) and associated arguments. # # # # # # # # # Try invoking this script with 'scriptname mn' 'scriptname oq qOption' (qOption can be some arbitrary string.) 'scriptname qXXX r' 'scriptname qr' Unexpected result, takes "r" as the argument to option "q" 'scriptname q r' Unexpected result, same as above If an option expects an argument ("flag:"), then it will grab whatever is next on the command line.

NO_ARGS=0 E_OPTERROR=65 if [ $# eq "$NO_ARGS" ] # Script invoked with no commandline args? then echo "Usage: `basename $0` options (mnopqrs)" exit $E_OPTERROR # Exit and explain usage, if no argument(s) given. fi # Usage: scriptname options # Note: dash () necessary

while getopts ":mnopq:rs" Option do case $Option in m ) echo "Scenario #1: option m";; n | o ) echo "Scenario #2: option $Option";; p ) echo "Scenario #3: option p";; q ) echo "Scenario #4: option q, with argument \"$OPTARG\"";; # Note that option 'q' must have an associated argument, # otherwise it falls through to the default. r | s ) echo "Scenario #5: option $Option"'';; * ) echo "Unimplemented option chosen.";; # DEFAULT esac done shift $(($OPTIND 1)) # Decrements the argument pointer so it points to next argument. exit 0

Script Behavior source, . (dot command) This command, when invoked from the command line, executes a script. Within a script, a source filename loads the file filename. This is the shell scripting equivalent of a C/C++ #include directive. It is useful in situations when multiple scripts use a common data file or function library.

Example 1118. "Including" a data file

#!/bin/bash

Chapter 11. Internal Commands and Builtins

140

Advanced BashScripting Guide

. datafile # Load a data file. # Same effect as "source datafile", but more portable. # The file "datafile" must be present in current working directory, #+ since it is referred to by its 'basename'. # Now, reference some data from that file. echo "variable1 (from datafile) = $variable1" echo "variable3 (from datafile) = $variable3" let "sum = $variable2 + $variable4" echo "Sum of variable2 + variable4 (from datafile) = $sum" echo "message1 (from datafile) is \"$message1\"" # Note: escaped quotes print_message This is the messageprint function in the datafile.

exit 0

File datafile for Example 1118, above. Must be present in same directory.
# This is a data file loaded by a script. # Files of this type may contain variables, functions, etc. # It may be loaded with a 'source' or '.' command by a shell script. # Let's initialize some variables. variable1=22 variable2=474 variable3=5 variable4=97 message1="Hello, how are you?" message2="Enough for now. Goodbye." print_message () { # Echoes any message passed to it. if [ z "$1" ] then return 1 # Error, if argument missing. fi echo until [ z "$1" ] do # Step through arguments passed to function. echo n "$1" # Echo args one at a time, suppressing line feeds. echo n " " # Insert spaces between words. shift # Next one. done echo

Chapter 11. Internal Commands and Builtins

141

Advanced BashScripting Guide

return 0 }

It is even possible for a script to source itself, though this does not seem to have any practical applications.

Example 1119. A (useless) script that sources itself

#!/bin/bash # selfsource.sh: a script sourcing itself "recursively." # From "Stupid Script Tricks," Volume II. MAXPASSCNT=100 # Maximum number of execution passes.

echo n "$pass_count " # At first execution pass, this just echoes two blank spaces, #+ since $pass_count still uninitialized. let "pass_count += 1" # Assumes the uninitialized variable $pass_count #+ can be incremented the first time around. # This works with Bash and pdksh, but #+ it relies on nonportable (and possibly dangerous) behavior. # Better would be to set $pass_count to 0 if noninitialized. while [ "$pass_count" le $MAXPASSCNT ] do . $0 # Script "sources" itself, rather than calling itself. # ./$0 (which would be true recursion) doesn't work here. done # #+ #+ #+ # # # #+ What occurs here is not actually recursion, since the script effectively "expands" itself (generates a new section of code) with each pass throught the 'while' loop', with each 'source' in line 20. Of course, the script interprets each newly 'sourced' "#!" line as a comment, and not as the start of a new script.

echo exit 0 # The net effect is counting from 1 to 100. # Very impressive.

# Exercise: # # Write a script that uses this trick to do something useful.

exit Unconditionally terminates a script. The exit command may optionally take an integer argument, which is returned to the shell as the exit status of the script. It is good practice to end all but the simplest scripts with an exit 0, indicating a successful run. If a script terminates with an exit lacking an argument, the exit status of the script is the exit status of the last command executed in the script, not counting the exit. exec Chapter 11. Internal Commands and Builtins 142

Advanced BashScripting Guide This shell builtin replaces the current process with a specified command. Normally, when the shell encounters a command, it forks off a child process to actually execute the command. Using the exec builtin, the shell does not fork, and the command exec'ed replaces the shell. When used in a script, therefore, it forces an exit from the script when the exec'ed command terminates. For this reason, if an exec appears in a script, it would probably be the final command.

Example 1120. Effects of exec

#!/bin/bash exec echo "Exiting \"$0\"." # Exit from script here.

# # The following lines never execute. echo "This echo will never echo." exit 99 # # #+ # This script will not exit here. Check exit value after script terminates with an 'echo $?'. It will *not* be 99.

Example 1121. A script that exec's itself

#!/bin/bash # selfexec.sh echo echo "This line appears ONCE in the script, yet it keeps echoing." echo "The PID of this instance of the script is still $$." # Demonstrates that a subshell is not forked off. echo "==================== Hit CtlC to exit ====================" sleep 1 exec $0 # Spawns another instance of this same script #+ that replaces the previous one. # Why not?

echo "This line will never echo!" exit 0

An exec also serves to reassign file descriptors. exec <zzzfile replaces stdin with the file zzzfile (see Example 161). The exec option to find is not the same as the exec shell builtin. shopt This command permits changing shell options on the fly (see Example 241 and Example 242). It often appears in the Bash startup files, but also has its uses in scripts. Needs version 2 or later of Bash.
shopt s cdspell # Allows minor misspelling of directory names with 'cd'

Chapter 11. Internal Commands and Builtins

143

Advanced BashScripting Guide

cd /hpme pwd # Oops! Mistyped '/home'. # /home # The shell corrected the misspelling.

Commands true A command that returns a successful (zero) exit status, but does nothing else.
# Endless loop while true # alias for ":" do operation1 operation2 ... operationn # Need a way to break out of loop. done

false A command that returns an unsuccessful exit status, but does nothing else.
# Null loop while false do # The following code will not execute. operation1 operation2 ... operationn # Nothing happens! done

type [cmd] Similar to the which external command, type cmd gives the full pathname to "cmd". Unlike which, type is a Bash builtin. The useful a option to type identifies keywords and builtins, and also locates system commands with identical names.
bash$ type '[' [ is a shell builtin bash$ type a '[' [ is a shell builtin [ is /usr/bin/[

hash [cmds] Record the path name of specified commands (in the shell hash table), so the shell or script will not need to search the $PATH on subsequent calls to those commands. When hash is called with no arguments, it simply lists the commands that have been hashed. The r option resets the hash table. help help COMMAND looks up a short usage summary of the shell builtin COMMAND. This is the counterpart to whatis, but for builtins.
bash$ help exit exit: exit [n] Exit the shell with a status of N. If N is omitted, the exit status is that of the last command executed.

Chapter 11. Internal Commands and Builtins

144

Advanced BashScripting Guide

11.1. Job Control Commands

Certain of the following job control commands take a "job identifier" as an argument. See the table at end of the chapter. jobs Lists the jobs running in the background, giving the job number. Not as useful as ps. It is all too easy to confuse jobs and processes. Certain builtins, such as kill, disown, and wait accept either a job number or a process number as an argument. The fg, bg and jobs commands accept only a job number.
bash$ sleep 100 & [1] 1384 bash $ jobs [1]+ Running

sleep 100 &

"1" is the job number (jobs are maintained by the current shell), and "1384" is the process number (processes are maintained by the system). To kill this job/process, either a kill %1 or a kill 1384 works. Thanks, S.C. disown Remove job(s) from the shell's table of active jobs. fg, bg The fg command switches a job running in the background into the foreground. The bg command restarts a suspended job, and runs it in the background. If no job number is specified, then the fg or bg command acts upon the currently running job. wait Stop script execution until all jobs running in background have terminated, or until the job number or process id specified as an option terminates. Returns the exit status of waitedfor command. You may use the wait command to prevent a script from exiting before a background job finishes executing (this would create a dreaded orphan process).

Example 1122. Waiting for a process to finish before proceeding

#!/bin/bash ROOT_UID=0 # Only users with $UID 0 have root privileges. E_NOTROOT=65 E_NOPARAMS=66 if [ "$UID" ne "$ROOT_UID" ] then echo "Must be root to run this script." # "Run along kid, it's past your bedtime." exit $E_NOTROOT fi

Chapter 11. Internal Commands and Builtins

145

Advanced BashScripting Guide

if [ z "$1" ] then echo "Usage: `basename $0` findstring" exit $E_NOPARAMS fi

echo "Updating 'locate' database..." echo "This may take a while." updatedb /usr & # Must be run as root. wait # Don't run the rest of the script until 'updatedb' finished. # You want the the database updated before looking up the file name. locate $1 # Without the wait command, in the worse case scenario, # the script would exit while 'updatedb' was still running, # leaving it as an orphan process. exit 0

Optionally, wait can take a job identifier as an argument, for example, wait%1 or wait $PPID. See the job id table.

Within a script, running a command in the background with an ampersand (&) may cause the script to hang until ENTER is hit. This seems to occur with commands that write to stdout. It can be a major annoyance.
#!/bin/bash # test.sh ls l & echo "Done." bash$ ./test.sh Done. [bozo@localhost testscripts]$ total 1 rwxrxrx 1 bozo bozo _

34 Oct 11 15:09 test.sh

Placing a wait after the background command seems to remedy this.

#!/bin/bash # test.sh ls l & echo "Done." wait bash$ ./test.sh Done. [bozo@localhost testscripts]$ total 1 rwxrxrx 1 bozo bozo

34 Oct 11 15:09 test.sh

Chapter 11. Internal Commands and Builtins

146

Advanced BashScripting Guide Redirecting the output of the command to a file or even to /dev/null also takes care of this problem. suspend This has a similar effect to ControlZ, but it suspends the shell (the shell's parent process should resume it at an appropriate time). logout Exit a login shell, optionally specifying an exit status. times Gives statistics on the system time used in executing commands, in the following form:
0m0.020s 0m0.020s

This capability is of very limited value, since it is uncommon to profile and benchmark shell scripts. kill Forcibly terminate a process by sending it an appropriate terminate signal (see Example 134).

Example 1123. A script that kills itself

#!/bin/bash # selfdestruct.sh kill $$ # Script kills its own process here. # Recall that "$$" is the script's PID.

echo "This line will not echo." # Instead, the shell sends a "Terminated" message to stdout. exit 0 # After this script terminates prematurely, #+ what exit status does it return? # # sh selfdestruct.sh # echo $? # 143 # # 143 = 128 + 15 # TERM signal

kill l lists all the signals. A kill 9 is a "sure kill", which will usually terminate a process that stubbornly refuses to die with a plain kill. Sometimes, a kill 15 works. A "zombie process", that is, a process whose parent has terminated, cannot be killed (you can't kill something that is already dead), but init will usually clean it up sooner or later. command The command COMMAND directive disables aliases and functions for the command "COMMAND". This is one of three shell directives that effect script command processing. The others are builtin and enable. builtin Invoking builtin BUILTIN_COMMAND runs the command "BUILTIN_COMMAND" as a shell Chapter 11. Internal Commands and Builtins 147

Advanced BashScripting Guide builtin, temporarily disabling both functions and external system commands with the same name. enable This either enables or disables a shell builtin command. As an example, enable n kill disables the shell builtin kill, so that when Bash subsequently encounters kill, it invokes /bin/kill. The a option to enable lists all the shell builtins, indicating whether or not they are enabled. The f filename option lets enable load a builtin as a shared library (DLL) module from a properly compiled object file. [26]. autoload This is a port to Bash of the ksh autoloader. With autoload in place, a function with an "autoload" declaration will load from an external file at its first invocation. [27] This saves system resources. Note that autoload is not a part of the core Bash installation. It needs to be loaded in with enable f (see above).

Table 111. Job identifiers Notation %N %S %?S %% %+ % $! Meaning Job number [N] Invocation (command line) of job begins with string S Invocation (command line) of job contains within it string S "current" job (last job stopped in foreground or started in background) "current" job (last job stopped in foreground or started in background) Last job Last background process

Chapter 11. Internal Commands and Builtins

148

Chapter 12. External Filters, Programs and Commands

Standard UNIX commands make shell scripts more versatile. The power of scripts comes from coupling system commands and shell directives with simple programming constructs.

12.1. Basic Commands

The first commands a novice learns ls The basic file "list" command. It is all too easy to underestimate the power of this humble command. For example, using the R, recursive option, ls provides a treelike listing of a directory structure. Other interesting options are S, sort listing by file size, t, sort by file modification time, and i, show file inodes (see Example 123).

Example 121. Using ls to create a table of contents for burning a CDR disk
#!/bin/bash # burncd.sh # Script to automate burning a CDR.

SPEED=2 # May use higher speed if your hardware supports it. IMAGEFILE=cdimage.iso CONTENTSFILE=contents DEFAULTDIR=/opt # This is the directory containing the data to be burned. # Make sure it exists. # Uses Joerg Schilling's "cdrecord" package. # (http://www.fokus.gmd.de/nthp/employees/schilling/cdrecord.html) # If this script invoked as an ordinary user, need to suid cdrecord #+ (chmod u+s /usr/bin/cdrecord, as root). if [ z "$1" ] then IMAGE_DIRECTORY=$DEFAULTDIR # Default directory, if not specified on command line. else IMAGE_DIRECTORY=$1 fi # Create a "table of contents" file. ls lRF $IMAGE_DIRECTORY > $IMAGE_DIRECTORY/$CONTENTSFILE # The "l" option gives a "long" file listing. # The "R" option makes the listing recursive. # The "F" option marks the file types (directories get a trailing /). echo "Creating table of contents." # Create an image file preparatory to burning it onto the CDR. mkisofs r o $IMAGFILE $IMAGE_DIRECTORY echo "Creating ISO9660 file system image ($IMAGEFILE)."

Chapter 12. External Filters, Programs and Commands

149

Advanced BashScripting Guide

# Burn the CDR. cdrecord v isosize speed=$SPEED dev=0,0 $IMAGEFILE echo "Burning the disk." echo "Please be patient, this will take a while." exit 0

cat, tac cat, an acronym for concatenate, lists a file to stdout. When combined with redirection (> or >>), it is commonly used to concatenate files.
cat filename cat file.1 file.2 file.3 > file.123

The n option to cat inserts consecutive numbers before all lines of the target file(s). The b option numbers only the nonblank lines. The v option echoes nonprintable characters, using ^ notation. The s option squeezes multiple consecutive blank lines into a single blank line. See also Example 1221 and Example 1217. tac, is the inverse of cat, listing a file backwards from its end. rev reverses each line of a file, and outputs to stdout. This is not the same effect as tac, as it preserves the order of the lines, but flips each one around.
bash$ cat file1.txt This is line 1. This is line 2.

bash$ tac file1.txt This is line 2. This is line 1.

bash$ rev file1.txt .1 enil si sihT .2 enil si sihT

cp This is the file copy command. cp file1 file2 copies file1 to file2, overwriting file2 if it already exists (see Example 125). Particularly useful are the a archive flag (for copying an entire directory tree) and the r and R recursive flags. mv This is the file move command. It is equivalent to a combination of cp and rm. It may be used to move multiple files to a directory, or even to rename a directory. For some examples of using mv in a script, see Example 917 and Example A3. When used in a noninteractive script, mv takes the f (force) option to bypass user input. When a directory is moved to a preexisting directory, it becomes a subdirectory of the destination directory.

Chapter 12. External Filters, Programs and Commands

150

Advanced BashScripting Guide

bash$ mv source_directory target_directory bash$ ls lF target_directory total 1 drwxrwxrx 2 bozo bozo

1024 May 28 19:20 source_directory/

rm Delete (remove) a file or files. The f option forces removal of even readonly files, and is useful for bypassing user input in a script. When used with the recursive flag r, this command removes files all the way down the directory tree. rmdir Remove directory. The directory must be empty of all files, including invisible "dotfiles", [28] for this command to succeed. mkdir Make directory, creates a new directory. mkdir p project/programs/December creates the named directory. The p option automatically creates any necessary parent directories. chmod Changes the attributes of an existing file (see Example 1110).
chmod +x filename # Makes "filename" executable for all users. chmod u+s filename # Sets "suid" bit on "filename" permissions. # An ordinary user may execute "filename" with same privileges as the file's owner. # (This does not apply to shell scripts.) chmod 644 filename # Makes "filename" readable/writable to owner, readable to # others # (octal mode). chmod 1777 directoryname # Gives everyone read, write, and execute permission in directory, # however also sets the "sticky bit". # This means that only the owner of the directory, # owner of the file, and, of course, root # can delete any particular file in that directory.

chattr Change file attributes. This has the same effect as chmod above, but with a different invocation syntax, and it works only on an ext2 filesystem. ln Creates links to preexistings files. Most often used with the s, symbolic or "soft" link flag. This permits referencing the linked file by more than one name and is a superior alternative to aliasing (see Example 46). ln s oldfile newfile links the previously existing oldfile to the newly created link, newfile. man, info These commands access the manual and information pages on system commands and installed utilities. When available, the info pages usually contain a more detailed description than do the man pages. Chapter 12. External Filters, Programs and Commands 151

Advanced BashScripting Guide

12.2. Complex Commands

Commands for more advanced users find exec COMMAND \; Carries out COMMAND on each file that find matches. The command sequence terminates with \; (the ";" is escaped to make certain the shell passes it to find literally). If COMMAND contains {}, then find substitutes the full path name of the selected file for "{}".
bash$ find ~/ name '*.txt' /home/bozo/.kde/share/apps/karm/karmdata.txt /home/bozo/misc/irmeyc.txt /home/bozo/testscripts/1.txt

find /home/bozo/projects mtime 1 # Lists all files in /home/bozo/projects directory tree #+ that were modified within the last day. # # mtime = last modification time of the target file # ctime = last status change time (via 'chmod' or otherwise) # atime = last access time DIR=/home/bozo/junk_files find "$DIR" type f atime +5 exec rm {} \; # Deletes all files in "/home/bozo/junk_files" #+ that have not been accessed in at least 5 days. # # "type filetype", where # f = regular file # d = directory, etc. # (The 'find' manpage has a complete listing.) find /etc exec grep '[09][09]*[.][09][09]*[.][09][09]*[.][09][09]*' {} \; # Finds all IP addresses (xxx.xxx.xxx.xxx) in /etc directory files. # There a few extraneous hits how can they be filtered out? # Perhaps by: find /etc type f exec cat '{}' \; | tr c '.[:digit:]' '\n' \ | grep '^[^.][^.]*\.[^.][^.]*\.[^.][^.]*\.[^.][^.]*$' # [:digit:] is one of the character classes # introduced with the POSIX 1003.2 standard. # Thanks, S.C.

The exec option to find should not be confused with the exec shell builtin.

Example 122. Badname, eliminate file names in current directory containing bad characters and whitespace. Chapter 12. External Filters, Programs and Commands 152

Advanced BashScripting Guide

#!/bin/bash # Delete filenames in current directory containing bad characters. for filename in * do badname=`echo "$filename" | sed n /[\+\{\;\"\\\=\?~\(\)\<\>\&\*\|\$]/p` # Files containing those nasties: + { ; " \ = ? ~ ( ) < > & * | $ rm $badname 2>/dev/null # So error messages deepsixed. done # Now, take care of files containing all manner of whitespace. find . name "* *" exec rm f {} \; # The path name of the file that "find" finds replaces the "{}". # The '\' ensures that the ';' is interpreted literally, as end of command. exit 0 # # Commands below this line will not execute because of "exit" command. # An alternative to the above script: find . name '*[+{;"\\=?~()<>&*|$ ]*' exec rm f '{}' \; exit 0 # (Thanks, S.C.)

Example 123. Deleting a file by its inode number

#!/bin/bash # idelete.sh: Deleting a file by its inode number. # This is useful when a filename starts with an illegal character, #+ such as ? or . ARGCOUNT=1 E_WRONGARGS=70 E_FILE_NOT_EXIST=71 E_CHANGED_MIND=72 # Filename arg must be passed to script.

if [ $# ne "$ARGCOUNT" ] then echo "Usage: `basename $0` filename" exit $E_WRONGARGS fi if [ ! e "$1" ] then echo "File \""$1"\" does not exist." exit $E_FILE_NOT_EXIST fi inum=`ls i | grep "$1" | awk '{print $1}'` # inum = inode (index node) number of file # Every file has an inode, a record that hold its physical address info. echo; echo n "Are you absolutely sure you want to delete \"$1\" (y/n)? " # The 'v' option to 'rm' also asks this. read answer case "$answer" in [nN]) echo "Changed your mind, huh?"

Chapter 12. External Filters, Programs and Commands

153

Advanced BashScripting Guide

exit $E_CHANGED_MIND ;; echo "Deleting file \"$1\".";;

*) esac

find . inum $inum exec rm {} \; echo "File "\"$1"\" deleted!" exit 0

See Example 1222, Example 34, and Example 109 for scripts using find. Its manpage provides more detail on this complex and powerful command. xargs A filter for feeding arguments to a command, and also a tool for assembling the commands themselves. It breaks a data stream into small enough chunks for filters and commands to process. Consider it as a powerful replacement for backquotes. In situations where backquotes fail with a too many arguments error, substituting xargs often works. Normally, xargs reads from stdin or from a pipe, but it can also be given the output of a file. The default command for xargs is echo. This means that input piped to xargs may have linefeeds and other whitespace characters stripped out.
bash$ ls l total 0 rwrwr rwrwr

1 bozo 1 bozo

bozo bozo

0 Jan 29 23:58 file1 0 Jan 29 23:58 file2

bash$ ls l | xargs total 0 rwrwr 1 bozo bozo 0 Jan 29 23:58 file1 rwrwr 1 bozo bozo 0 Jan 29 23:58

ls | xargs p l gzip gzips every file in current directory, one at a time, prompting before each operation. An interesting xargs option is n NN, which limits to NN the number of arguments passed. ls | xargs n 8 echo lists the files in the current directory in 8 columns. Another useful option is 0, in combination with find print0 or grep lZ. This allows handling arguments containing whitespace or quotes. find / type f print0 | xargs 0 grep liwZ GUI | xargs 0 rm f grep rliwZ GUI / | xargs 0 rm f Either of the above will remove any file containing "GUI". (Thanks, S.C.)

Example 124. Logfile using xargs to monitor system log

Chapter 12. External Filters, Programs and Commands

154

Advanced BashScripting Guide

#!/bin/bash # Generates a log file in current directory # from the tail end of /var/log/messages. # Note: /var/log/messages must be world readable # if this script invoked by an ordinary user. # #root chmod 644 /var/log/messages LINES=5 ( date; uname a ) >>logfile # Time and machine name echo >>logfile tail $LINES /var/log/messages | xargs | fmt s >>logfile echo >>logfile echo >>logfile exit 0 # Exercise: # # Modify this script to track changes in /var/log/messages at intervals #+ of 20 minutes. # Hint: Use the "watch" command.

Example 125. copydir, copying files in current directory to another, using xargs
#!/bin/bash # Copy (verbose) all files in current directory # to directory specified on command line. if [ z "$1" ] # Exit if no argument given. then echo "Usage: `basename $0` directorytocopyto" exit 65 fi ls . | xargs i t cp ./{} $1 # This is the exact equivalent of # cp * $1 # unless any of the filenames has "whitespace" characters. exit 0

expr Allpurpose expression evaluator: Concatenates and evaluates the arguments according to the operation given (arguments must be separated by spaces). Operations may be arithmetic, comparison, string, or logical. expr 3 + 5 returns 8 expr 5 % 3 returns 2 expr 5 \* 3 returns 15

Chapter 12. External Filters, Programs and Commands

155

Advanced BashScripting Guide The multiplication operator must be escaped when used in an arithmetic expression with expr. y=`expr $y + 1` Increment a variable, with the same effect as let y=y+1 and y=$(($y+1)). This is an example of arithmetic expansion. z=`expr substr $string $position $length` Extract substring of $length characters, starting at $position. Example 126. Using expr
#!/bin/bash # Demonstrating some of the uses of 'expr' # ======================================= echo # Arithmetic Operators # echo "Arithmetic Operators" echo a=`expr 5 + 3` echo "5 + 3 = $a" a=`expr $a + 1` echo echo "a + 1 = $a" echo "(incrementing a variable)" a=`expr 5 % 3` # modulo echo echo "5 mod 3 = $a" echo echo # Logical Operators # # Returns 1 if true, 0 if false, #+ opposite of normal Bash convention. echo "Logical Operators" echo x=24 y=25 b=`expr $x = $y` echo "b = $b" echo

# Test equality. # 0 ( $x ne $y )

a=3 b=`expr $a \> 10` echo 'b=`expr $a \> 10`, therefore...' echo "If a > 10, b = 0 (false)" echo "b = $b" # 0 ( 3 ! gt 10 ) echo

Chapter 12. External Filters, Programs and Commands

156

Advanced BashScripting Guide

b=`expr $a \< 10` echo "If a < 10, b = 1 (true)" echo "b = $b" # 1 ( 3 lt 10 ) echo # Note escaping of operators. b=`expr $a \<= 3` echo "If a <= 3, b = 1 (true)" echo "b = $b" # 1 ( 3 le 3 ) # There is also a "\>=" operator (greater than or equal to).

echo echo # Comparison Operators # echo "Comparison Operators" echo a=zipper echo "a is $a" if [ `expr $a = snap` ] # Force reevaluation of variable 'a' then echo "a is not zipper" fi echo echo

# String Operators # echo "String Operators" echo a=1234zipper43231 echo "The string being operated upon is \"$a\"." # length: length of string b=`expr length $a` echo "Length of \"$a\" is $b." # index: position of first character in substring # that matches a character in string b=`expr index $a 23` echo "Numerical position of first \"2\" in \"$a\" is \"$b\"." # substr: extract substring, starting position & length specified b=`expr substr $a 2 6` echo "Substring of \"$a\", starting at position 2,\ and 6 chars long is \"$b\"."

# The default behavior of the 'match' operations is to #+ search for the specified match at the ***beginning*** of the string. # # uses Regular Expressions b=`expr match "$a" '[09]*'` # Numerical count.

Chapter 12. External Filters, Programs and Commands

157

Advanced BashScripting Guide

echo Number of digits at the beginning of \"$a\" is $b. b=`expr match "$a" '\([09]*\)'` # Note that escaped parentheses # == == + trigger substring match. echo "The digits at the beginning of \"$a\" are \"$b\"." echo exit 0

The : operator can substitute for match. For example, b=`expr $a : [09]*` is the exact equivalent of b=`expr match $a [09]*` in the above listing.
#!/bin/bash echo echo "String operations using \"expr \$string : \" construct" echo "===================================================" echo a=1234zipper5FLIPPER43231 echo "The string being operated upon is \"`expr "$a" : '\(.*\)'`\"." # Escaped parentheses grouping operator. == == # #+ #+ # *************************** Escaped parentheses match a substring ***************************

# If no escaped parentheses... #+ then 'expr' converts the string operand to an integer. echo "Length of \"$a\" is `expr "$a" : '.*'`." # Length of string

echo "Number of digits at the beginning of \"$a\" is `expr "$a" : '[09]*'`." # # echo echo "The digits at the beginning of \"$a\" are `expr "$a" : '\([09]*\)'`." # == == echo "The first 7 characters of \"$a\" are `expr "$a" : '\(.......\)'`." # ===== == == # Again, escaped parentheses force a substring match. # echo "The last 7 characters of \"$a\" are `expr "$a" : '.*\(.......\)'`." # ==== end of string operator ^^ # (actually means skip over one or more of any characters until specified #+ substring) echo exit 0

This example illustrates how expr uses the escaped parentheses \( ... \) grouping operator in tandem with regular expression parsing to match a substring.

Chapter 12. External Filters, Programs and Commands

158

Advanced BashScripting Guide Perl, sed, and awk have far superior string parsing facilities. A short sed or awk "subroutine" within a script (see Section 34.2) is an attractive alternative to using expr. See Section 9.2 for more on string operations.

12.3. Time / Date Commands

Time/date and timing date Simply invoked, date prints the date and time to stdout. Where this command gets interesting is in its formatting and parsing options.

Example 127. Using date

#!/bin/bash # Exercising the 'date' command echo "The number of days since the year's beginning is `date +%j`." # Needs a leading '+' to invoke formatting. # %j gives day of year. echo "The number of seconds elapsed since 01/01/1970 is `date +%s`." # %s yields number of seconds since "UNIX epoch" began, #+ but how is this useful? prefix=temp suffix=`eval date +%s` # The "+%s" option to 'date' is GNUspecific. filename=$prefix.$suffix echo $filename # It's great for creating "unique" temp filenames, #+ even better than using $$. # Read the 'date' man page for more formatting options. exit 0

The u option gives the UTC (Universal Coordinated Time).

bash$ date Fri Mar 29 21:07:39 MST 2002

bash$ date u Sat Mar 30 04:07:42 UTC 2002

zdump Echoes the time in a specified time zone.

bash$ zdump EST EST Tue Sep 18 22:09:22 2001 EST

time Chapter 12. External Filters, Programs and Commands 159

Advanced BashScripting Guide Outputs very verbose timing statistics for executing a command. time ls l / gives something like this:
0.00user 0.01system 0:00.05elapsed 16%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (149major+27minor)pagefaults 0swaps

See also the very similar times command in the previous section. As of version 2.0 of Bash, time became a shell reserved word, with slightly altered behavior in a pipeline. touch Utility for updating access/modification times of a file to current system time or other specified time, but also useful for creating a new file. The command touch zzz will create a new file of zero length, named zzz, assuming that zzz did not previously exist. Timestamping empty files in this way is useful for storing date information, for example in keeping track of modification times on a project. The touch command is equivalent to : >> newfile or >> newfile (for ordinary files). at The at job control command executes a given set of commands at a specified time. Superficially, it resembles crond, however, at is chiefly useful for onetime execution of a command set. at 2pm January 15 prompts for a set of commands to execute at that time. These commands should be shellscript compatible, since, for all practical purposes, the user is typing in an executable shell script a line at a time. Input terminates with a CtlD. Using either the f option or input redirection (<), at reads a command list from a file. This file is an executable shell script, though it should, of course, be noninteractive. Particularly clever is including the runparts command in the file to execute a different set of scripts.
bash$ at 2:30 am Friday < atjobs.list job 2 at 20001027 02:30

batch The batch job control command is similar to at, but it runs a command list when the system load drops below .8. Like at, it can read commands from a file with the f option. cal Prints a neatly formatted monthly calendar to stdout. Will do current year or a large range of past and future years. sleep This is the shell equivalent of a wait loop. It pauses for a specified number of seconds, doing nothing. It can be useful for timing or in processes running in the background, checking for a specific event every so often (polling), as in Example 306.
sleep 3 # Pauses 3 seconds.

The sleep command defaults to seconds, but minute, hours, or days may also be specified. Chapter 12. External Filters, Programs and Commands 160

Advanced BashScripting Guide

sleep 3 h # Pauses 3 hours!

The watch command may be a better choice than sleep for running commands at timed intervals. usleep Microsleep (the "u" may be read as the Greek "mu", or micro prefix). This is the same as sleep, above, but "sleeps" in microsecond intervals. It can be used for finegrain timing, or for polling an ongoing process at very frequent intervals.
usleep 30 # Pauses 30 microseconds.

This command is part of the Red Hat initscripts / rcscripts package. The usleep command does not provide particularly accurate timing, and is therefore unsuitable for critical timing loops. hwclock, clock The hwclock command accesses or adjusts the machine's hardware clock. Some options require root privileges. The /etc/rc.d/rc.sysinit startup file uses hwclock to set the system time from the hardware clock at bootup. The clock command is a synonym for hwclock.

12.4. Text Processing Commands

Commands affecting text and text files sort File sorter, often used as a filter in a pipe. This command sorts a text stream or file forwards or backwards, or according to various keys or character positions. Using the m option, it merges presorted input files. The info page lists its many capabilities and options. See Example 109, Example 1010, and Example A9. tsort Topological sort, reading in pairs of whitespaceseparated strings and sorting according to input patterns. uniq This filter removes duplicate lines from a sorted file. It is often seen in a pipe coupled with sort.
cat list1 list2 list3 | sort | uniq > final.list # Concatenates the list files, # sorts them, # removes duplicate lines, # and finally writes the result to an output file.

The useful c option prefixes each line of the input file with its number of occurrences.
bash$ cat testfile This line occurs only once. This line occurs twice. This line occurs twice.

Chapter 12. External Filters, Programs and Commands

161

Advanced BashScripting Guide

This line occurs three times. This line occurs three times. This line occurs three times.

bash$ uniq c testfile 1 This line occurs only once. 2 This line occurs twice. 3 This line occurs three times.

bash$ sort testfile | uniq c | sort nr 3 This line occurs three times. 2 This line occurs twice. 1 This line occurs only once.

The sort INPUTFILE | uniq c | sort nr command string produces a frequency of occurrence listing on the INPUTFILE file (the nr options to sort cause a reverse numerical sort). This template finds use in analysis of log files and dictionary lists, and wherever the lexical structure of a document needs to be examined.

Example 128. Word Frequency Analysis

#!/bin/bash # wf.sh: Crude word frequency analysis on a text file.

# Check for input file on command line. ARGS=1 E_BADARGS=65 E_NOFILE=66 if [ $# ne "$ARGS" ] # Correct number of arguments passed to script? then echo "Usage: `basename $0` filename" exit $E_BADARGS fi if [ ! f "$1" ] # Check if file exists. then echo "File \"$1\" does not exist." exit $E_NOFILE fi

######################################################## # main () sed e 's/\.//g' e 's/ /\ /g' "$1" | tr 'AZ' 'az' | sort | uniq c | sort nr # ========================= # Frequency of occurrence # Filter out periods and #+ change space between words to linefeed, #+ then shift characters to lowercase, and #+ finally prefix occurrence count and sort numerically. ########################################################

Chapter 12. External Filters, Programs and Commands

162

Advanced BashScripting Guide

# Exercises: # # 1) Add 'sed' commands to filter out other punctuation, such as commas. # 2) Modify to also filter out multiple spaces and other whitespace. # 3) Add a secondary sort key, so that instances of equal occurrence #+ are sorted alphabetically. exit 0 bash$ cat testfile This line occurs only once. This line occurs twice. This line occurs twice. This line occurs three times. This line occurs three times. This line occurs three times.

bash$ ./wf.sh testfile 6 this 6 occurs 6 line 3 times 3 three 2 twice 1 only 1 once

expand, unexpand The expand filter converts tabs to spaces. It is often used in a pipe. The unexpand filter converts spaces to tabs. This reverses the effect of expand. cut A tool for extracting fields from files. It is similar to the print $N command set in awk, but more limited. It may be simpler to use cut in a script than awk. Particularly important are the d (delimiter) and f (field specifier) options. Using cut to obtain a listing of the mounted filesystems:
cat /etc/mtab | cut d ' ' f1,2

Using cut to list the OS and kernel version:

uname a | cut d" " f1,3,11,12

Using cut to extract message headers from an email folder:

bash$ grep '^Subject:' readmessages | cut c1080 Re: Linux suitable for missioncritical apps? MAKE MILLIONS WORKING AT HOME!!! Spam complaint Re: Spam complaint

Using cut to parse a file:

Chapter 12. External Filters, Programs and Commands

163

Advanced BashScripting Guide

# List all the users in /etc/passwd. FILENAME=/etc/passwd for user in $(cut d: f1 $FILENAME) do echo $user done # Thanks, Oleg Philon for suggesting this.

cut d ' ' f2,3 filename is equivalent to awk F'[ ]' '{ print $2, $3 }' filename See also Example 1233. paste Tool for merging together different files into a single, multicolumn file. In combination with cut, useful for creating system log files. join Consider this a specialpurpose cousin of paste. This powerful utility allows merging two files in a meaningful fashion, which essentially creates a simple version of a relational database. The join command operates on exactly two files, but pastes together only those lines with a common tagged field (usually a numerical label), and writes the result to stdout. The files to be joined should be sorted according to the tagged field for the matchups to work properly.
File: 1.data 100 Shoes 200 Laces 300 Socks File: 2.data 100 $40.00 200 $1.00 300 $2.00 bash$ join 1.data 2.data File: 1.data 2.data 100 Shoes $40.00 200 Laces $1.00 300 Socks $2.00

The tagged field appears only once in the output. head lists the beginning of a file to stdout (the default is 10 lines, but this can be changed). It has a number of interesting options. Example 129. Which files are scripts?
#!/bin/bash # scriptdetector.sh: Detects scripts within a directory.

Chapter 12. External Filters, Programs and Commands

164

Advanced BashScripting Guide

TESTCHARS=2 SHABANG='#!' # Test first 2 characters. # Scripts begin with a "shabang."

for file in * # Traverse all the files in current directory. do if [[ `head c$TESTCHARS "$file"` = "$SHABANG" ]] # head c2 #! # The 'c' option to "head" outputs a specified #+ number of characters, rather than lines (the default). then echo "File \"$file\" is a script." else echo "File \"$file\" is *not* a script." fi done exit 0

Example 1210. Generating 10digit random numbers

#!/bin/bash # rnd.sh: Outputs a 10digit random number # Script by Stephane Chazelas. head c4 /dev/urandom | od N4 tu4 | sed ne '1s/.* //p'

# =================================================================== # # Analysis # # head: # c4 option takes first 4 bytes. # od: # N4 option limits output to 4 bytes. # tu4 option selects unsigned decimal format for output. # sed: # n option, in combination with "p" flag to the "s" command, # outputs only matched lines.

# The author of this script explains the action of 'sed', as follows. # head c4 /dev/urandom | od N4 tu4 | sed ne '1s/.* //p' # > | # Assume output up to "sed" > | # is 0000000 1198195154\n # # # # sed begins reading characters: 0000000 1198195154\n. Here it finds a newline character, so it is ready to process the first line (0000000 1198195154). It looks at its <range><action>s. The first and only one is

Chapter 12. External Filters, Programs and Commands

165

Advanced BashScripting Guide

# # # # # # range 1 action s/.* //p

The line number is in the range, so it executes the action: tries to substitute the longest string ending with a space in the line ("0000000 ") with nothing (//), and if it succeeds, prints the result ("p" is a flag to the "s" command here, this is different from the "p" command).

# sed is now ready to continue reading its input. (Note that before # continuing, if n option had not been passed, sed would have printed # the line once again). # # # # Now, sed reads the remainder of the characters, and finds the end of the file. It is now ready to process its 2nd line (which is also numbered '$' as it's the last one). It sees it is not matched by any <range>, so its job is done.

# In few word this sed commmand means: # "On the first line only, remove any character up to the rightmost space, # then print it." # A better way to do this would have been: # sed e 's/.* //;q' # Here, two <range><action>s (could have been written # sed e 's/.* //' e q): # # # range nothing (matches line) nothing (matches line) action s/.* // q (quit)

# Here, sed only reads its first line of input. # It performs both actions, and prints the line (substituted) before quitting # (because of the "q" action) since the "n" option is not passed. # =================================================================== # # A simpler altenative to the above 1line script would be: # head c4 /dev/urandom| od An tu4 exit 0

See also Example 1230. tail lists the end of a file to stdout (the default is 10 lines). Commonly used to keep track of changes to a system logfile, using the f option, which outputs lines appended to the file.

Example 1211. Using tail to monitor the system log

#!/bin/bash filename=sys.log cat /dev/null > $filename; echo "Creating / cleaning out file." # Creates file if it does not already exist, #+ and truncates it to zero length if it does. # : > filename and > filename also work. tail /var/log/messages > $filename

Chapter 12. External Filters, Programs and Commands

166

Advanced BashScripting Guide

# /var/log/messages must have world read permission for this to work. echo "$filename contains tail end of system log." exit 0

See also Example 124, Example 1230 and Example 306. grep A multipurpose file search tool that uses regular expressions. It was originally a command/filter in the venerable ed line editor, g/re/p, that is, global regular expression print. grep pattern [file...] Search the target file(s) for occurrences of pattern, where pattern may be literal text or a regular expression.
bash$ grep '[rst]ystem.$' osinfo.txt The GPL governs the distribution of the Linux operating system.

If no target file(s) specified, grep works as a filter on stdout, as in a pipe.

bash$ ps ax | grep clock 765 tty1 S 0:00 xclock 901 pts/1 S 0:00 grep clock

The i option causes a caseinsensitive search. The w option matches only whole words. The l option lists only the files in which matches were found, but not the matching lines. The r (recursive) option searches files in the current working directory and all subdirectories below it. The n option lists the matching lines, together with line numbers.
bash$ grep n Linux osinfo.txt 2:This is a file containing information about Linux. 6:The GPL governs the distribution of the Linux operating system.

The v (or invertmatch) option filters out matches.

grep pattern1 *.txt | grep v pattern2 # Matches all lines in "*.txt" files containing "pattern1", # but ***not*** "pattern2".

The c (count) option gives a numerical count of matches, rather than actually listing the matches.

Chapter 12. External Filters, Programs and Commands

167

Advanced BashScripting Guide

grep c txt *.sgml # (number of occurrences of "txt" in "*.sgml" files)

# grep cz . # ^ dot # means count (c) zeroseparated (z) items matching "." # that is, nonempty ones (containing at least 1 character). # printf 'a b\nc d\n\n\n\n\n\000\n\000e\000\000\nf' | grep cz . printf 'a b\nc d\n\n\n\n\n\000\n\000e\000\000\nf' | grep cz '$' printf 'a b\nc d\n\n\n\n\n\000\n\000e\000\000\nf' | grep cz '^' # printf 'a b\nc d\n\n\n\n\n\000\n\000e\000\000\nf' | grep c '$' # By default, newline chars (\n) separate items to match. # Note that the z option is GNU "grep" specific.

# 4 # 5 # 5 # 9

# Thanks, S.C.

When invoked with more than one target file given, grep specifies which file contains matches.
bash$ grep Linux osinfo.txt misc.txt osinfo.txt:This is a file containing information about Linux. osinfo.txt:The GPL governs the distribution of the Linux operating system. misc.txt:The Linux operating system is steadily gaining in popularity.

To force grep to show the filename when searching only one target file, simply give /dev/null as the second file.
bash$ grep Linux osinfo.txt /dev/null osinfo.txt:This is a file containing information about Linux. osinfo.txt:The GPL governs the distribution of the Linux operating system.

If there is a successful match, grep returns an exit status of 0, which makes it useful in a condition test in a script, especially in combination with the q option to suppress output.
SUCCESS=0 word=Linux filename=data.file grep q "$word" "$filename" # if grep lookup succeeds

# The "q" option causes nothing to echo to stdout.

if [ $? eq $SUCCESS ] then echo "$word found in $filename" else echo "$word not found in $filename" fi

Example 306 demonstrates how to use grep to search for a word pattern in a system logfile.

Example 1212. Emulating "grep" in a script

Chapter 12. External Filters, Programs and Commands

168

Advanced BashScripting Guide

#!/bin/bash # grp.sh: Very crude reimplementation of 'grep'. E_BADARGS=65 if [ z "$1" ] # Check for argument to script. then echo "Usage: `basename $0` pattern" exit $E_BADARGS fi echo for file in * # Traverse all files in $PWD. do output=$(sed n /"$1"/p $file) # Command substitution. if [ ! z "$output" ] # What happens if "$output" is not quoted? then echo n "$file: " echo $output fi # sed ne "/$1/s|^|${file}: |p" is equivalent to above. echo done echo exit 0 # # # # Exercises: 1) Add newlines to output, if more than one match in any given file. 2) Add features.

egrep is the same as grep E. This uses a somewhat different, extended set of regular expressions, which can make the search somewhat more flexible. fgrep is the same as grep F. It does a literal string search (no regular expressions), which allegedly speeds things up a bit. agrep extends the capabilities of grep to approximate matching. The search string may differ by a specified number of characters from the resulting matches. This utility is not part of the core Linux distribution. To search compressed files, use zgrep, zegrep, or zfgrep. These also work on noncompressed files, though slower than plain grep, egrep, fgrep. They are handy for searching through a mixed set of files, some compressed, some not. To search bzipped files, use bzgrep. look The command look works like grep, but does a lookup on a "dictionary", a sorted word list. By default, look searches for a match in /usr/dict/words, but a different dictionary file may be specified.

Chapter 12. External Filters, Programs and Commands

169

Advanced BashScripting Guide Example 1213. Checking words in a list for validity
#!/bin/bash # lookup: Does a dictionary lookup on each word in a data file. file=words.data echo while [ "$word" != end ] # Last word in data file. do read word # From data file, because of redirection at end of loop. look $word > /dev/null # Don't want to display lines in dictionary file. lookup=$? # Exit status of 'look' command. if [ "$lookup" eq 0 ] then echo "\"$word\" is valid." else echo "\"$word\" is invalid." fi done <"$file" echo exit 0 # # Code below line will not execute because of "exit" command above. # Redirects stdin to $file, so "reads" come from there. # Data file from which to read words to test.

# Stephane Chazelas proposes the following, more concise alternative: while read word && [[ $word != end ]] do if look "$word" > /dev/null then echo "\"$word\" is valid." else echo "\"$word\" is invalid." fi done <"$file" exit 0

sed, awk Scripting languages especially suited for parsing text files and command output. May be embedded singly or in combination in pipes and shell scripts. sed Noninteractive "stream editor", permits using many ex commands in batch mode. It finds many uses in shell scripts. awk Programmable file extractor and formatter, good for manipulating and/or extracting fields (columns) in structured text files. Its syntax is similar to C. wc wc gives a "word count" on a file or I/O stream:
bash $ wc /usr/doc/sed3.02/README 20 127 838 /usr/doc/sed3.02/README [20 lines 127 words 838 characters]

Chapter 12. External Filters, Programs and Commands

170

Advanced BashScripting Guide wc w gives only the word count. wc l gives only the line count. wc c gives only the character count. wc L gives only the length of the longest line. Using wc to count how many .txt files are in current working directory:
$ ls *.txt | wc l # Will work as long as none of the "*.txt" files have a linefeed in their name. # Alternative ways of doing this are: # find . maxdepth 1 name \*.txt print0 | grep cz . # (shopt s nullglob; set *.txt; echo $#) # Thanks, S.C.

Using wc to total up the size of all the files whose names begin with letters in the range d h
bash$ wc [dh]* | grep total | awk '{print $3}' 71832

Using wc to count the instances of the word "Linux" in the main source file for this book.
bash$ grep Linux absbook.sgml | wc l 50

See also Example 1230 and Example 167. Certain commands include some of the functionality of wc as options.
... | grep foo | wc l # This frequently used construct can be more concisely rendered. ... | grep c foo # Just use the "c" (or "count") option of grep. # Thanks, S.C.

tr character translation filter. Must use quoting and/or brackets, as appropriate. Quotes prevent the shell from reinterpreting the special characters in tr command sequences. Brackets should be quoted to prevent expansion by the shell. Either tr "AZ" "*" <filename or tr AZ \* <filename changes all the uppercase letters in filename to asterisks (writes to stdout). On some systems this may not work, but tr AZ '[**]' will.

Chapter 12. External Filters, Programs and Commands

171

Advanced BashScripting Guide The d option deletes a range of characters.

echo "abcdef" echo "abcdef" | tr d bd # abcdef # aef

tr d 09 <filename # Deletes all digits from the file "filename".

The squeezerepeats (or s) option deletes all but the first instance of a string of consecutive characters. This option is useful for removing excess whitespace.
bash$ echo "XXXXX" | tr squeezerepeats 'X' X

The c "complement" option inverts the character set to match. With this option, tr acts only upon those characters not matching the specified set.
bash$ echo "acfdeb123" | tr c bd + +c+d+b++++

Note that tr recognizes POSIX character classes. [29]

bash$ echo "abcd2ef1" | tr '[:alpha:]' 21

Example 1214. toupper: Transforms a file to all uppercase.

#!/bin/bash # Changes a file to all uppercase. E_BADARGS=65 if [ z "$1" ] # Standard check for command line arg. then echo "Usage: `basename $0` filename" exit $E_BADARGS fi tr az AZ <"$1" # Same effect as above, but using POSIX character set notation: # tr '[:lower:]' '[:upper:]' <"$1" # Thanks, S.C. exit 0

Example 1215. lowercase: Changes all filenames in working directory to lowercase.

#! /bin/bash # # Changes every filename in working directory to all lowercase. #

Chapter 12. External Filters, Programs and Commands

172

Advanced BashScripting Guide

# Inspired by a script of John Dubois, # which was translated into into Bash by Chet Ramey, # and considerably simplified by Mendel Cooper, author of this document.

for filename in * do fname=`basename $filename` n=`echo $fname | tr AZ az` if [ "$fname" != "$n" ] then mv $fname $n fi done exit 0

# Traverse all files in directory.

# Change name to lowercase. # Rename only files not already lowercase.

# Code below this line will not execute because of "exit". ## # To run it, delete script above line. # The above script will not work on filenames containing blanks or newlines. # Stephane Chazelas therefore suggests the following alternative:

for filename in *

# Not necessary to use basename, # since "*" won't return any file containing "/". do n=`echo "$filename/" | tr '[:upper:]' '[:lower:]'` # POSIX char set notation. # Slash added so that trailing newlines are not # removed by command substitution. # Variable substitution: n=${n%/} # Removes trailing slash, added above, from filename. [[ $filename == $n ]] || mv "$filename" "$n" # Checks if filename already lowercase. done exit 0

Example 1216. du: DOS to UNIX text file conversion.

#!/bin/bash # du.sh: DOS to UNIX text file converter. E_WRONGARGS=65 if [ z "$1" ] then echo "Usage: `basename $0` filenametoconvert" exit $E_WRONGARGS fi NEWFILENAME=$1.unx CR='\015' # Carriage return. # Lines in a DOS text file end in a CRLF. tr d $CR < $1 > $NEWFILENAME

Chapter 12. External Filters, Programs and Commands

173

Advanced BashScripting Guide

# Delete CR and write to new file. echo "Original DOS text file is \"$1\"." echo "Converted UNIX text file is \"$NEWFILENAME\"." exit 0

Example 1217. rot13: rot13, ultraweak encryption.

#!/bin/bash # rot13.sh: Classic rot13 algorithm, # encryption that might fool a 3year old. # Usage: ./rot13.sh filename # or ./rot13.sh <filename # or ./rot13.sh and supply keyboard input (stdin) cat "$@" | tr 'azAZ' 'nzamNZAM' # "a" goes to "n", "b" to "o", etc. # The 'cat "$@"' construction #+ permits getting input either from stdin or from files. exit 0

Example 1218. Generating "CryptoQuote" Puzzles

#!/bin/bash # cryptoquote.sh: Encrypt quotes # Will encrypt famous quotes in a simple monoalphabetic substitution. # The result is similar to the "Crypto Quote" puzzles #+ seen in the Op Ed pages of the Sunday paper.

key=ETAOINSHRDLUBCFGJMQPVWZYXK # The "key" is nothing more than a scrambled alphabet. # Changing the "key" changes the encryption. # The 'cat "$@"' construction gets input either from stdin or from files. # If using stdin, terminate input with a ControlD. # Otherwise, specify filename as commandline parameter. cat "$@" | tr "az" "AZ" | tr "AZ" "$key" # | to uppercase | encrypt # Will work on lowercase, uppercase, or mixedcase quotes. # Passes nonalphabetic characters through unchanged.

# # # # # # #

Try this script with something like "Nothing so needs reforming as other people's habits." Mark Twain Output is: "CFPHRCS QF CIIOQ MINFMBRCS EQ FPHIM GIFGUI'Q HETRPQ." BEML PZERC

# To reverse the encryption: # cat "$@" | tr "$key" "AZ"

Chapter 12. External Filters, Programs and Commands

174

Advanced BashScripting Guide

# This simpleminded cipher can be broken by an average 12year old #+ using only pencil and paper. exit 0

tr variants The tr utility has two historic variants. The BSD version does not use brackets (tr az AZ), but the SysV one does (tr '[az]' '[AZ]'). The GNU version of tr resembles the BSD one, so quoting letter ranges within brackets is mandatory. fold A filter that wraps lines of input to a specified width. This is especially useful with the s option, which breaks lines at word spaces (see Example 1219 and Example A2). fmt Simpleminded file formatter, used as a filter in a pipe to "wrap" long lines of text output.

Example 1219. Formatted file listing.

#!/bin/bash WIDTH=40 b=`ls /usr/local/bin` echo $b | fmt w $WIDTH # Could also have been done by # echo $b | fold s w $WIDTH exit 0 # 40 columns wide. # Get a file listing...

See also Example 124. A powerful alternative to fmt is Kamil Toman's par utility, available from http://www.cs.berkeley.edu/~amc/Par/. col This deceptively named filter removes reverse line feeds from an input stream. It also attempts to replace whitespace with equivalent tabs. The chief use of col is in filtering the output from certain text processing utilities, such as groff and tbl. column Column formatter. This filter transforms listtype text output into a "prettyprinted" table by inserting tabs at appropriate places.

Example 1220. Using column to format a directory listing

#!/bin/bash # This is a slight modification of the example file in the "column" man page.

Chapter 12. External Filters, Programs and Commands

175

Advanced BashScripting Guide

(printf "PERMISSIONS LINKS OWNER GROUP SIZE MONTH DAY HH:MM PROGNAME\n" \ ; ls l | sed 1d) | column t # The "sed 1d" in the pipe deletes the first line of output, #+ which would be "total N", #+ where "N" is the total number of files found by "ls l". # The t option to "column" prettyprints a table. exit 0

colrm Column removal filter. This removes columns (characters) from a file and writes the file, lacking the range of specified columns, back to stdout. colrm 2 4 <filename removes the second through fourth characters from each line of the text file filename. If the file contains tabs or nonprintable characters, this may cause unpredictable behavior. In such cases, consider using expand and unexpand in a pipe preceding colrm. nl Line numbering filter. nl filename lists filename to stdout, but inserts consecutive numbers at the beginning of each nonblank line. If filename omitted, operates on stdin. The output of nl is very similar to cat n, however, by default nl does not list blank lines.

Example 1221. nl: A selfnumbering script.

#!/bin/bash # This script echoes itself twice to stdout with its lines numbered. # 'nl' sees this as line 3 since it does not number blank lines. # 'cat n' sees the above line as number 5. nl `basename $0` echo; echo # Now, let's try it with 'cat n'

cat n `basename $0` # The difference is that 'cat n' numbers the blank lines. # Note that 'nl ba' will also do so. exit 0

pr Print formatting filter. This will paginate files (or stdout) into sections suitable for hard copy printing or viewing on screen. Various options permit row and column manipulation, joining lines, setting margins, numbering lines, adding page headers, and merging files, among other things. The pr command combines much of the functionality of nl, paste, fold, column, and expand. pr o 5 width=65 fileZZZ | more gives a nice paginated listing to screen of fileZZZ with margins set at 5 and 65. A particularly useful option is d, forcing doublespacing (same effect as sed G). gettext

Chapter 12. External Filters, Programs and Commands

176

Advanced BashScripting Guide A GNU utility for localization and translating the text output of programs into foreign languages. While primarily intended for C programs, gettext also finds use in shell scripts. See the info page. iconv A utility for converting file(s) to a different encoding (character set). Its chief use is for localization. recode Consider this a fancier version of iconv, above. This very versatile utility for converting a file to a different encoding is not part of the standard Linux installation. TeX, gs TeX and Postscript are text markup languages used for preparing copy for printing or formatted video display. TeX is Donald Knuth's elaborate typsetting system. It is often convenient to write a shell script encapsulating all the options and arguments passed to one of these markup languages. Ghostscript (gs) is a GPLed Postscript interpreter. groff, tbl, eqn Yet another text markup and display formatting language is groff. This is the enhanced GNU version of the venerable UNIX roff/troff display and typesetting package. Manpages use groff (see Example A1). The tbl table processing utility is considered part of groff, as its function is to convert table markup into groff commands. The eqn equation processing utility is likewise part of groff, and its function is to convert equation markup into groff commands. lex, yacc The lex lexical analyzer produces programs for pattern matching. This has been replaced by the nonproprietary flex on Linux systems. The yacc utility creates a parser based on a set of specifications. This has been replaced by the nonproprietary bison on Linux systems.

12.5. File and Archiving Commands

Archiving tar The standard UNIX archiving utility. Originally a Tape ARchiving program, it has developed into a general purpose package that can handle all manner of archiving with all types of destination devices, ranging from tape drives to regular files to even stdout (see Example 34). GNU tar has been patched to accept various compression filters, such as tar czvf archive_name.tar.gz *, which recursively archives and gzips all files in a directory tree except dotfiles in the current working directory ($PWD). [30] Some useful tar options: 1. c create (a new archive) 2. x extract (files from existing archive) 3. delete delete (files from existing archive)

Chapter 12. External Filters, Programs and Commands

177

Advanced BashScripting Guide This option will not work on magnetic tape devices. 4. r append (files to existing archive) 5. A append (tar files to existing archive) 6. t list (contents of existing archive) 7. u update archive 8. d compare archive with specified filesystem 9. z gzip the archive (compress or uncompress, depending on whether combined with the c or x) option 10. j bzip2 the archive It may be difficult to recover data from a corrupted gzipped tar archive. When archiving important files, make multiple backups. shar Shell archiving utility. The files in a shell archive are concatenated without compression, and the resultant archive is essentially a shell script, complete with #!/bin/sh header, and containing all the necessary unarchiving commands. Shar archives still show up in Internet newsgroups, but otherwise shar has been pretty well replaced by tar/gzip. The unshar command unpacks shar archives. ar Creation and manipulation utility for archives, mainly used for binary object file libraries. rpm The Red Hat Package Manager, or rpm utility provides a wrapper for source or binary archives. It includes commands for installing and checking the integrity of packages, among other things. A simple rpm i package_name.rpm usually suffices to install a package, though there are many more options available. An rpm qa gives a complete list of all installed rpm packages on a given system. An rpm qa package_name lists only the package(s) corresponding to package_name.
bash$ rpm qa redhatlogos1.1.31 glibc2.2.413 cracklib2.712 dosfstools2.71 gdbm1.8.010 ksymoops2.4.11 mktemp1.511 perl5.6.017 reiserfsutils3.x.0j2 ...

bash$ rpm qa docbookutils docbookutils0.6.92

bash$ rpm qa docbook | grep docbook docbookdtd31sgml1.010 docbookstyledsssl1.643 docbookdtd30sgml1.010 docbookdtd40sgml1.011 docbookutilspdf0.6.92

Chapter 12. External Filters, Programs and Commands

178

Advanced BashScripting Guide

docbookdtd41sgml1.010 docbookutils0.6.92

cpio This specialized archiving copy command (copy input and output) is rarely seen any more, having been supplanted by tar/gzip. It still has its uses, such as moving a directory tree.

Example 1222. Using cpio to move a directory tree

#!/bin/bash # Copying a directory tree using cpio. ARGS=2 E_BADARGS=65 if [ $# ne "$ARGS" ] then echo "Usage: `basename $0` source destination" exit $E_BADARGS fi source=$1 destination=$2 find "$source" depth | cpio admvp "$destination" # Read the man page to decipher these cpio options. exit 0

rpm2cpio This command extracts a cpio archive from an rpm one.

Example 1223. Unpacking an rpm archive

#!/bin/bash # derpm.sh: Unpack an 'rpm' archive : ${1?"Usage: `basename $0` targetfile"} # Must specify 'rpm' archive name as an argument.

TEMPFILE=$$.cpio

# Tempfile with "unique" name. # $$ is process ID of script. # Converts rpm archive into cpio archive. # Unpacks cpio archive. # Deletes cpio archive.

rpm2cpio < $1 > $TEMPFILE cpio makedirectories F $TEMPFILE i rm f $TEMPFILE exit 0

# Exercise: # Add check for whether 1) "targetfile" exists and #+ 2) it is really an rpm archive. # Hint: parse output of 'file' command.

Compression Chapter 12. External Filters, Programs and Commands 179

Advanced BashScripting Guide gzip The standard GNU/UNIX compression utility, replacing the inferior and proprietary compress. The corresponding decompression command is gunzip, which is the equivalent of gzip d. The zcat filter decompresses a gzipped file to stdout, as possible input to a pipe or redirection. This is, in effect, a cat command that works on compressed files (including files processed with the older compress utility). The zcat command is equivalent to gzip dc. On some commercial UNIX systems, zcat is a synonym for uncompress c, and will not work on gzipped files. See also Example 77. bzip2 An alternate compression utility, usually more efficient (but slower) than gzip, especially on large files. The corresponding decompression command is bunzip2. Newer versions of tar have been patched with bzip2 support. compress, uncompress This is an older, proprietary compression utility found in commercial UNIX distributions. The more efficient gzip has largely replaced it. Linux distributions generally include a compress workalike for compatibility, although gunzip can unarchive files treated with compress. The znew command transforms compressed files into gzipped ones. sq Yet another compression utility, a filter that works only on sorted ASCII word lists. It uses the standard invocation syntax for a filter, sq < inputfile > outputfile. Fast, but not nearly as efficient as gzip. The corresponding uncompression filter is unsq, invoked like sq. The output of sq may be piped to gzip for further compression. zip, unzip Crossplatform file archiving and compression utility compatible with DOS pkzip.exe. "Zipped" archives seem to be a more acceptable medium of exchange on the Internet than "tarballs". unarc, unarj, unrar These Linux utilities permit unpacking archives compressed with the DOS arc.exe, arj.exe, and rar.exe programs. File Information file A utility for identifying file types. The command file filename will return a file specification for filename, such as ascii text or data. It references the magic numbers found in /usr/share/magic, /etc/magic, or /usr/lib/magic, depending on the Linux/UNIX distribution. The f option causes file to run in batch mode, to read from a designated file a list of filenames to analyze. The z option, when used on a compressed target file, forces an attempt to analyze the uncompressed file type.
bash$ file test.tar.gz

Chapter 12. External Filters, Programs and Commands

180

Advanced BashScripting Guide

test.tar.gz: gzip compressed data, deflated, last modified: Sun Sep 16 13:34:51 2001, os:

bash file z test.tar.gz test.tar.gz: GNU tar archive (gzip compressed data, deflated, last modified: Sun Sep 16 13

Example 1224. Stripping comments from C program files

#!/bin/bash # stripcomment.sh: Strips out the comments (/* COMMENT */) in a C program. E_NOARGS=65 E_ARGERROR=66 E_WRONG_FILE_TYPE=67 if [ $# eq "$E_NOARGS" ] then echo "Usage: `basename $0` Cprogramfile" >&2 # Error message to stderr. exit $E_ARGERROR fi # Test for correct file type. type=`eval file $1 | awk '{ print $2, $3, $4, $5 }'` # "file $1" echoes file type... # then awk removes the first field of this, the filename... # then the result is fed into the variable "type". correct_type="ASCII C program text" if [ "$type" != "$correct_type" ] then echo echo "This script works on C program files only." echo exit $E_WRONG_FILE_TYPE fi

# Rather cryptic sed script: # sed ' /^\/\*/d /.*\/\*/d ' $1 # # Easy to understand if you take several hours to learn sed fundamentals.

# Need to add one more line to the sed script to deal with #+ case where line of code has a comment following it on same line. # This is left as a nontrivial exercise. # Also, the above code deletes lines with a "*/" or "/*", # not a desirable result. exit 0

# # Code below this line will not execute because of 'exit 0' above.

Chapter 12. External Filters, Programs and Commands

181

Advanced BashScripting Guide

# Stephane Chazelas suggests the following alternative: usage() { echo "Usage: `basename $0` Cprogramfile" >&2 exit 1 } WEIRD=`echo n e '\377'` # or WEIRD=$'\377' [[ $# eq 1 ]] || usage case `file "$1"` in *"C program text"*) sed e "s%/\*%${WEIRD}%g;s%\*/%${WEIRD}%g" "$1" \ | tr '\377\n' '\n\377' \ | sed ne 'p;n' \ | tr d '\n' | tr '\377' '\n';; *) usage;; esac # # # # # # # # This is still fooled by things like: printf("/*"); or /* /* buggy embedded comment */ To handle all special cases (comments in strings, comments in string where there is a \", \\" ...) the only way is to write a C parser (lex or yacc perhaps?).

exit 0

which which commandxxx gives the full path to "commandxxx". This is useful for finding out whether a particular command or utility is installed on the system. $bash which rm
/usr/bin/rm

whereis Similar to which, above, whereis commandxxx gives the full path to "commandxxx", but also to its manpage. $bash whereis rm
rm: /bin/rm /usr/share/man/man1/rm.1.bz2

whatis whatis filexxx looks up "filexxx" in the whatis database. This is useful for identifying system commands and important configuration files. Consider it a simplified man command. $bash whatis whatis
whatis (1) search the whatis database for complete words

Example 1225. Exploring /usr/X11R6/bin

#!/bin/bash # What are all those mysterious binaries in /usr/X11R6/bin?

Chapter 12. External Filters, Programs and Commands

182

Advanced BashScripting Guide

DIRECTORY="/usr/X11R6/bin" # Try also "/bin", "/usr/bin", "/usr/local/bin", etc. for file in $DIRECTORY/* do whatis `basename $file` done

# Echoes info about the binary.

exit 0 # You may wish to redirect output of this script, like so: # ./what.sh >>whatis.db # or view it a page at a time on stdout, # ./what.sh | less

See also Example 103. vdir Show a detailed directory listing. The effect is similar to ls l. This is one of the GNU fileutils.
bash$ vdir total 10 rwrr rwrr rwrr bash ls l total 10 rwrr rwrr rwrr

1 bozo 1 bozo 1 bozo

bozo bozo bozo

4034 Jul 18 22:04 data1.xrolo 4602 May 25 13:58 data1.xrolo.bak 877 Dec 17 2000 employment.xrolo

1 bozo 1 bozo 1 bozo

bozo bozo bozo

4034 Jul 18 22:04 data1.xrolo 4602 May 25 13:58 data1.xrolo.bak 877 Dec 17 2000 employment.xrolo

locate, slocate The locate command searches for files using a database stored for just that purpose. The slocate command is the secure version of locate (which may be aliased to slocate). $bash locate hickson
/usr/lib/xephem/catalogs/hickson.edb

readlink Disclose the file that a symbolic link points to.

bash$ readlink /usr/bin/awk ../../bin/gawk

strings Use the strings command to find printable strings in a binary or data file. It will list sequences of printable characters found in the target file. This might be handy for a quick 'n dirty examination of a core dump or for looking at an unknown graphic image file (strings imagefile | more might show something like JFIF, which would identify the file as a jpeg graphic). In a script, you would probably parse the output of strings with grep or sed. See Example 107 and Example 109.

Example 1226. An "improved" strings command

Chapter 12. External Filters, Programs and Commands

183

Advanced BashScripting Guide

#!/bin/bash # wstrings.sh: "wordstrings" (enhanced "strings" command) # # This script filters the output of "strings" by checking it #+ against a standard word list file. # This effectively eliminates all the gibberish and noise, #+ and outputs only recognized words. # ================================================================= # Standard Check for Script Argument(s) ARGS=1 E_BADARGS=65 E_NOFILE=66 if [ $# ne $ARGS ] then echo "Usage: `basename $0` filename" exit $E_BADARGS fi if [ ! f "$1" ] # Check if file exists. then echo "File \"$1\" does not exist." exit $E_NOFILE fi # =================================================================

MINSTRLEN=3 WORDFILE=/usr/share/dict/linux.words

# # # #+ #+

Minimum string length. Dictionary file. May specify a different word list file of format 1 word per line.

wlist=`strings "$1" | tr AZ az | tr '[:space:]' Z | \ tr cs '[:alpha:]' Z | tr s '\173\377' Z | tr Z ' '` # Translate output of 'strings' command with multiple passes of 'tr'. # "tr AZ az" converts to lowercase. # "tr '[:space:]'" converts whitespace characters to Z's. # "tr cs '[:alpha:]' Z" converts nonalphabetic characters to Z's, #+ and squeezes multiple consecutive Z's. # "tr s '\173\377' Z" converts all characters past 'z' to Z's #+ and squeezes multiple consecutive Z's, #+ which gets rid of all the weird characters that the previous #+ translation failed to deal with. # Finally, "tr Z ' '" converts all those Z's to whitespace, #+ which will be seen as word separators in the loop below. # Note the technique of feeding the output of 'tr' back to itself, #+ but with different arguments and/or options on each pass.

for word in $wlist

# # # #

Important: $wlist must not be quoted here. "$wlist" does not work. Why?

do strlen=${#word} if [ "$strlen" lt "$MINSTRLEN" ] # String length. # Skip over short strings.

Chapter 12. External Filters, Programs and Commands

184

Advanced BashScripting Guide

then continue fi grep Fw $word "$WORDFILE" done # Match whole words only.

exit 0

Comparison diff, patch diff: flexible file comparison utility. It compares the target files linebyline sequentially. In some applications, such as comparing word dictionaries, it may be helpful to filter the files through sort and uniq before piping them to diff. diff file1 file2 outputs the lines in the files that differ, with carets showing which file each particular line belongs to. The sidebyside option to diff outputs each compared file, line by line, in separate columns, with nonmatching lines marked. The c and u options likewise make the output of the command easier to interpret. There are available various fancy frontends for diff, such as spiff, wdiff, xdiff, and mgdiff. The diff command returns an exit status of 0 if the compared files are identical, and 1 if they differ. This permits use of diff in a test construct within a shell script (see below). A common use for diff is generating difference files to be used with patch The e option outputs files suitable for ed or ex scripts. patch: flexible versioning utility. Given a difference file generated by diff, patch can upgrade a previous version of a package to a newer version. It is much more convenient to distribute a relatively small "diff" file than the entire body of a newly revised package. Kernel "patches" have become the preferred method of distributing the frequent releases of the Linux kernel.
patch p1 <patchfile # Takes all the changes listed in 'patchfile' # and applies them to the files referenced therein. # This upgrades to a newer version of the package.

Patching the kernel:

cd /usr/src gzip cd patchXX.gz | patch p0 # Upgrading kernel source using 'patch'. # From the Linux kernel docs "README", # by anonymous author (Alan Cox?).

The diff command can also recursively compare directories (for the filenames present).

Chapter 12. External Filters, Programs and Commands

185

Advanced BashScripting Guide

bash$ diff r ~/notes1 ~/notes2 Only in /home/bozo/notes1: file02 Only in /home/bozo/notes1: file03 Only in /home/bozo/notes2: file04

Use zdiff to compare gzipped files. diff3 An extended version of diff that compares three files at a time. This command returns an exit value of 0 upon successful execution, but unfortunately this gives no information about the results of the comparison.
bash$ diff3 file1 file2 file3 ==== 1:1c This is line 1 of "file1". 2:1c This is line 1 of "file2". 3:1c This is line 1 of "file3"

sdiff Compare and/or edit two files in order to merge them into an output file. Because of its interactive nature, this command would find little use in a script. cmp The cmp command is a simpler version of diff, above. Whereas diff reports the differences between two files, cmp merely shows at what point they differ. Like diff, cmp returns an exit status of 0 if the compared files are identical, and 1 if they differ. This permits use in a test construct within a shell script.

Example 1227. Using cmp to compare two files within a script.

#!/bin/bash ARGS=2 # Two args to script expected. E_BADARGS=65 E_UNREADABLE=66 if [ $# ne "$ARGS" ] then echo "Usage: `basename $0` file1 file2" exit $E_BADARGS fi if [[ ! r "$1" || ! r "$2" ]] then echo "Both files to be compared must exist and be readable." exit $E_UNREADABLE fi cmp $1 $2 &> /dev/null # /dev/null buries the output of the "cmp" command. # cmp s $1 $2 has same result ("s" silent flag to "cmp") # Thank you Anders Gustavsson for pointing this out. #

Chapter 12. External Filters, Programs and Commands

186

Advanced BashScripting Guide

# Also works with 'diff', i.e., diff $1 $2 &> /dev/null

if [ $? eq 0 ] # Test exit status of "cmp" command. then echo "File \"$1\" is identical to file \"$2\"." else echo "File \"$1\" differs from file \"$2\"." fi exit 0

Use zcmp on gzipped files. comm Versatile file comparison utility. The files must be sorted for this to be useful. comm options firstfile secondfile comm file1 file2 outputs three columns: column 1 = lines unique to file1 column 2 = lines unique to file2 column 3 = lines common to both. The options allow suppressing output of one or more columns. 1 suppresses column 1 2 suppresses column 2 3 suppresses column 3 12 suppresses both columns 1 and 2, etc. Utilities basename Strips the path information from a file name, printing only the file name. The construction basename $0 lets the script know its name, that is, the name it was invoked by. This can be used for "usage" messages if, for example a script is called with missing arguments:
echo "Usage: `basename $0` arg1 arg2 ... argn"

dirname Strips the basename from a filename, printing only the path information. basename and dirname can operate on any arbitrary string. The argument does not need to refer to an existing file, or even be a filename for that matter (see Example A8).

Example 1228. basename and dirname

#!/bin/bash a=/home/bozo/dailyjournal.txt echo "Basename of /home/bozo/dailyjournal.txt = `basename $a`" echo "Dirname of /home/bozo/dailyjournal.txt = `dirname $a`"

Chapter 12. External Filters, Programs and Commands

187

Advanced BashScripting Guide

echo echo "My own home is `basename ~/`." echo "The home of my home is `dirname ~/`." exit 0 # Also works with just ~. # Also works with just ~.

split Utility for splitting a file into smaller chunks. Usually used for splitting up large files in order to back them up on floppies or preparatory to emailing or uploading them. sum, cksum, md5sum These are utilities for generating checksums. A checksum is a number mathematically calculated from the contents of a file, for the purpose of checking its integrity. A script might refer to a list of checksums for security purposes, such as ensuring that the contents of key system files have not been altered or corrupted. For security applications, use the 128bit md5sum (message digest checksum) command.
bash$ cksum /boot/vmlinuz 1670054224 804083 /boot/vmlinuz

bash$ md5sum /boot/vmlinuz 0f43eccea8f09e0a0b2b5cf1dcf333ba

/boot/vmlinuz

Note that cksum also shows the size, in bytes, of the target file.

Example 1229. Checking file integrity

#!/bin/bash # fileintegrity.sh: Checking whether files in a given directory # have been tampered with. E_DIR_NOMATCH=70 E_BAD_DBFILE=71 dbfile=File_record.md5 # Filename for storing records.

set_up_database () { echo ""$directory"" > "$dbfile" # Write directory name to first line of file. md5sum "$directory"/* >> "$dbfile" # Append md5 checksums and filenames. } check_database () { local n=0 local filename local checksum # # # This file check should be unnecessary, #+ but better safe than sorry. if [ ! r "$dbfile" ]

Chapter 12. External Filters, Programs and Commands

188

Advanced BashScripting Guide

then echo "Unable to read checksum database file!" exit $E_BAD_DBFILE fi # # while read record[n] do directory_checked="${record[0]}" if [ "$directory_checked" != "$directory" ] then echo "Directories do not match up!" # Tried to use file for a different directory. exit $E_DIR_NOMATCH fi if [ "$n" gt 0 ] # Not directory name. then filename[n]=$( echo ${record[$n]} | awk '{ print $2 }' ) # md5sum writes records backwards, #+ checksum first, then filename. checksum[n]=$( md5sum "${filename[n]}" ) if [ "${record[n]}" = "${checksum[n]}" ] then echo "${filename[n]} unchanged." else echo "${filename[n]} : CHECKSUM ERROR!" # File has been changed since last checked. fi fi

let "n+=1" done <"$dbfile" }

# Read from checksum database file.

# =================================================== # # main () if [ z "$1" ] then directory="$PWD" else directory="$1" fi clear

# If not specified, #+ use current working directory.

# Clear screen.

# # if [ ! r "$dbfile" ] # Need to create database file? then echo "Setting up database file, \""$directory"/"$dbfile"\"."; echo set_up_database fi # # check_database # Do the actual work.

Chapter 12. External Filters, Programs and Commands

189

Advanced BashScripting Guide

echo # You may wish to redirect the stdout of this script to a file, #+ especially if the directory checked has many files in it. # For a much more thorough file integrity check, #+ consider the "Tripwire" package, #+ http://sourceforge.net/projects/tripwire/. exit 0

See also Example A20 for a creative use of the md5sum command. shred Securely erase a file by overwriting it multiple times with random bit patterns before deleting it. This command has the same effect as Example 1242, but does it in a more thorough and elegant manner. This is one of the GNU fileutils. Advanced forensic technology may still be able to recover the contents of a file, even after application of shred. Encoding and Encryption uuencode This utility encodes binary files into ASCII characters, making them suitable for transmission in the body of an email message or in a newsgroup posting. uudecode This reverses the encoding, decoding uuencoded files back into the original binaries.

Example 1230. Uudecoding encoded files

#!/bin/bash lines=35 # Allow 35 lines for the header (very generous).

for File in * # Test all the files in the current working directory... do search1=`head $lines $File | grep begin | wc w` search2=`tail $lines $File | grep end | wc w` # Uuencoded files have a "begin" near the beginning, #+ and an "end" near the end. if [ "$search1" gt 0 ] then if [ "$search2" gt 0 ] then echo "uudecoding $File " uudecode $File fi fi done # Note that running this script upon itself fools it #+ into thinking it is a uuencoded file, #+ because it contains both "begin" and "end". # Exercise:

Chapter 12. External Filters, Programs and Commands

190

Advanced BashScripting Guide

# Modify this script to check for a newsgroup header. exit 0

The fold s command may be useful (possibly in a pipe) to process long uudecoded text messages downloaded from Usenet newsgroups. mimencode, mmencode The mimencode and mmencode commands process multimediaencoded email attachments. Although mail user agents (such as pine or kmail) normally handle this automatically, these particular utilities permit manipulating such attachments manually from the command line or in a batch by means of a shell script. crypt At one time, this was the standard UNIX file encryption utility. [31] Politically motivated government regulations prohibiting the export of encryption software resulted in the disappearance of crypt from much of the UNIX world, and it is still missing from most Linux distributions. Fortunately, programmers have come up with a number of decent alternatives to it, among them the author's very own cruft (see Example A5). Miscellaneous mktemp Create a temporary file with a "unique" filename.
PREFIX=filename tempfile=`mktemp $PREFIX.XXXXXX` # ^^^^^^ Need at least 6 placeholders #+ in the filename template. echo "tempfile name = $tempfile" # tempfile name = filename.QA2ZpY # or something similar...

make Utility for building and compiling binary packages. This can also be used for any set of operations that is triggered by incremental changes in source files.

The make command checks a Makefile, a list of file dependencies and operations to be carried out. install Special purpose file copying command, similar to cp, but capable of setting permissions and attributes of the copied files. This command seems tailormade for installing software packages, and as such it shows up frequently in Makefiles (in the make install : section). It could likewise find use in installation scripts. dos2unix This utility, written by Benjamin Lin and collaborators, converts DOSformatted text files (lines terminated by CRLF) to UNIX format (lines terminated by LF only), and viceversa. ptx The ptx [targetfile] command outputs a permuted index (crossreference list) of the targetfile. This may be further filtered and formatted in a pipe, if necessary. more, less Pagers that display a text file or stream to stdout, one screenful at a time. These may be used to filter the output of a script.

Chapter 12. External Filters, Programs and Commands

191

Advanced BashScripting Guide

12.6. Communications Commands

Certain of the following commands find use in chasing spammers, as well as in network data transfer and analysis. Information and Statistics host Searches for information about an Internet host by name or IP address, using DNS.
bash$ host surfacemail.com surfacemail.com. has address 202.92.42.236

ipcalc Carries out IP address lookups. With the h option, ipcalc does a reverse DNS lookup, finding the name of the host (server) from the IP address.
bash$ ipcalc h 202.92.42.236 HOSTNAME=surfacemail.com

nslookup Do an Internet "name server lookup" on a host by IP address. This is essentially equivalent to ipcalc h or dig x . The command may be run either interactively or noninteractively, i.e., from within a script. The nslookup command has allegedly been "deprecated," but it still has its uses.
bash$ nslookup sil 66.97.104.180 nslookup kuhleersparnis.ch Server: 135.116.137.2 Address: 135.116.137.2#53 Nonauthoritative answer: Name: kuhleersparnis.ch

dig Similar to nslookup, do an Internet "name server lookup" on a host. May be run either interactively or noninteractively, i.e., from within a script. Compare the output of dig x with ipcalc h and nslookup.
bash$ dig x 81.9.6.2 ;; Got answer: ;; >>HEADER<< opcode: QUERY, status: NXDOMAIN, id: 11649 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;2.6.9.81.inaddr.arpa. ;; AUTHORITY SECTION: 6.9.81.inaddr.arpa. 3600 2002031705 900 600 86400 3600

IN

PTR

IN

SOA

ns.eltel.net. noc.eltel.net.

;; Query time: 537 msec ;; SERVER: 135.116.137.2#53(135.116.137.2)

Chapter 12. External Filters, Programs and Commands

192

Advanced BashScripting Guide

;; WHEN: Wed Jun 26 08:35:24 2002 ;; MSG SIZE rcvd: 91

traceroute Trace the route taken by packets sent to a remote host. This command works within a LAN, WAN, or over the Internet. The remote host may be specified by an IP address. The output of this command may be filtered by grep or sed in a pipe.
bash$ traceroute 81.9.6.2 traceroute to 81.9.6.2 (81.9.6.2), 30 hops max, 38 byte packets 1 tc43.xjbnnbrb.com (136.30.178.8) 191.303 ms 179.400 ms 179.767 ms 2 or0.xjbnnbrb.com (136.30.178.1) 179.536 ms 179.534 ms 169.685 ms 3 192.168.11.101 (192.168.11.101) 189.471 ms 189.556 ms * ...

ping Broadcast an "ICMP ECHO_REQUEST" packet to other machines, either on a local or remote network. This is a diagnostic tool for testing network connections, and it should be used with caution. A successful ping returns an exit status of 0. This can be tested for in a script.
bash$ ping localhost PING localhost.localdomain (127.0.0.1) from 127.0.0.1 : 56(84) bytes of data. Warning: time of day goes back, taking countermeasures. 64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=0 ttl=255 time=709 usec 64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=1 ttl=255 time=286 usec localhost.localdomain ping statistics 2 packets transmitted, 2 packets received, 0% packet loss roundtrip min/avg/max/mdev = 0.286/0.497/0.709/0.212 ms

whois Perform a DNS (Domain Name System) lookup. The h option permits specifying which whois server to query. See Example 46. finger Retrieve information about users on a network. Optionally, this command can display a user's ~/.plan, ~/.project, and ~/.forward files, if present.
bash$ finger Login Name bozo Bozo Bozeman bozo Bozo Bozeman bozo Bozo Bozeman

Tty tty1 ttyp0 ttyp1

Idle 8

Login Time Office Jun 25 16:59 Jun 25 16:59 Jun 25 17:07

Office Phone

bash$ finger bozo Login: bozo Directory: /home/bozo On since Fri Aug 31 20:13 On since Fri Aug 31 20:13 On since Fri Aug 31 20:13 On since Fri Aug 31 20:31 No mail. No Plan.

(MST) (MST) (MST) (MST)

on on on on

Name: Bozo Bozeman Shell: /bin/bash tty1 1 hour 38 minutes idle pts/0 12 seconds idle pts/1 pts/2 1 hour 16 minutes idle

Chapter 12. External Filters, Programs and Commands

193

Advanced BashScripting Guide Out of security considerations, many networks disable finger and its associated daemon. [32] vrfy Verify an Internet email address. Remote Host Access sx, rx The sx and rx command set serves to transfer files to and from a remote host using the xmodem protocol. These are generally part of a communications package, such as minicom. sz, rz The sz and rz command set serves to transfer files to and from a remote host using the zmodem protocol. Zmodem has certain advantages over xmodem, such as faster transmission rate and resumption of interrupted file transfers. Like sx and rx, these are generally part of a communications package. ftp Utility and protocol for uploading / downloading files to or from a remote host. An ftp session can be automated in a script (see Example 176, Example A5, and Example A14). uucp UNIX to UNIX copy. This is a communications package for transferring files between UNIX servers. A shell script is an effective way to handle a uucp command sequence. Since the advent of the Internet and email, uucp seems to have faded into obscurity, but it still exists and remains perfectly workable in situations where an Internet connection is not available or appropriate. cu Call Up a remote system and connect as a simple terminal. This command is part of the uucp package. It is a sort of dumbeddown version of telnet. telnet Utility and protocol for connecting to a remote host. The telnet protocol contains security holes and should therefore probably be avoided. wget The wget utility noninteractively retrieves or downloads files from a Web or ftp site. It works well in a script.
wget p http://www.xyz23.com/file01.html wget r ftp://ftp.xyz24.net/~bozo/project_files/ o $SAVEFILE

lynx The lynx Web and file browser can be used inside a script (with the dump option) to retrieve a file from a Web or ftp site noninteractively.
lynx dump http://www.xyz23.com/file01.html >$SAVEFILE

rlogin Remote login, initates a session on a remote host. This command has security issues, so use ssh instead. rsh Remote shell, executes command(s) on a remote host. This has security issues, so use ssh instead. rcp Remote copy, copies files between two different networked machines. Using rcp and similar Chapter 12. External Filters, Programs and Commands 194

Advanced BashScripting Guide utilities with security implications in a shell script may not be advisable. Consider, instead, using ssh or an expect script. ssh Secure shell, logs onto a remote host and executes commands there. This secure replacement for telnet, rlogin, rcp, and rsh uses identity authentication and encryption. See its manpage for details. Local Network write This is a utility for terminaltoterminal communication. It allows sending lines from your terminal (console or xterm) to that of another user. The mesg command may, of course, be used to disable write access to a terminal Since write is interactive, it would not normally find use in a script. Mail mail Send or read email messages. This strippeddown commandline mail client works fine as a command embedded in a script.

Example 1231. A script that mails itself

#!/bin/sh # selfmailer.sh: Selfmailing script adr=${1:`whoami`} # Default to current user, if not specified. # Typing 'selfmailer.sh [email protected]' #+ sends this script to that addressee. # Just 'selfmailer.sh' (no argument) sends the script #+ to the person invoking it, for example, [email protected]. # # For more on the ${parameter:default} construct, #+ see the "Parameter Substitution" section #+ of the "Variables Revisited" chapter. # ============================================================================ cat $0 | mail s "Script \"`basename $0`\" has mailed itself to you." "$adr" # ============================================================================ # # Greetings from the selfmailing script. # A mischievous person has run this script, #+ which has caused it to mail itself to you. # Apparently, some people have nothing better #+ to do with their time. # echo "At `date`, script \"`basename $0`\" mailed to "$adr"." exit 0

mailto Similar to the mail command, mailto sends email messages from the command line or in a script. However, mailto also permits sending MIME (multimedia) messages. Chapter 12. External Filters, Programs and Commands 195

Advanced BashScripting Guide vacation This utility automatically replies to emails that the intended recipient is on vacation and temporarily unavailable. This runs on a network, in conjunction with sendmail, and is not applicable to a dialup POPmail account.

12.7. Terminal Control Commands

Command affecting the console or terminal tput Initialize terminal and/or fetch information about it from terminfo data. Various options permit certain terminal operations. tput clear is the equivalent of clear, below. tput reset is the equivalent of reset, below. tput sgr0 also resets the terminal, but without clearing the screen.
bash$ tput longname xterm terminal emulator (XFree86 4.0 Window System)

Issuing a tput cup X Y moves the cursor to the (X,Y) coordinates in the current terminal. A clear to erase the terminal screen would normally precede this. Note that stty offers a more powerful command set for controlling a terminal. infocmp This command prints out extensive information about the current terminal. It references the terminfo database.
bash$ infocmp # Reconstructed via infocmp from file: /usr/share/terminfo/r/rxvt rxvt|rxvt terminal emulator (X Window System), am, bce, eo, km, mir, msgr, xenl, xon, colors#8, cols#80, it#8, lines#24, pairs#64, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, ...

reset Reset terminal parameters and clear text screen. As with clear, the cursor and prompt reappear in the upper lefthand corner of the terminal. clear The clear command simply clears the text screen at the console or in an xterm. The prompt and cursor reappear at the upper lefthand corner of the screen or xterm window. This command may be used either at the command line or in a script. See Example 1025. script This utility records (saves to a file) all the user keystrokes at the command line in a console or an xterm window. This, in effect, creates a record of a session.

Chapter 12. External Filters, Programs and Commands

196

Advanced BashScripting Guide

12.8. Math Commands

"Doing the numbers" factor Decompose an integer into prime factors.
bash$ factor 27417 27417: 3 13 19 37

bc Bash can't handle floating point calculations, and it lacks operators for certain important mathematical functions. Fortunately, bc comes to the rescue. Not just a versatile, arbitrary precision calculation utility, bc offers many of the facilities of a programming language. bc has a syntax vaguely resembling C. Since it is a fairly wellbehaved UNIX utility, and may therefore be used in a pipe, bc comes in handy in scripts. Here is a simple template for using bc to calculate a script variable. This uses command substitution.
variable=$(echo "OPTIONS; OPERATIONS" | bc)

Example 1232. Monthly Payment on a Mortgage

#!/bin/bash # monthlypmt.sh: Calculates monthly payment on a mortgage.

# This is a modification of code in the "mcalc" (mortgage calculator) package, #+ by Jeff Schmidt and Mendel Cooper (yours truly, the author of this document). # http://www.ibiblio.org/pub/Linux/apps/financial/mcalc1.6.tar.gz [15k] echo echo "Given the principal, interest rate, and term of a mortgage," echo "calculate the monthly payment." bottom=1.0 echo echo read echo read echo read

n "Enter principal (no commas) " principal n "Enter interest rate (percent) " interest_r n "Enter term (months) " term

# If 12%, enter "12", not ".12".

interest_r=$(echo "scale=9; $interest_r/100.0" | bc) # Convert to decimal. # "scale" determines how many decimal places.

Chapter 12. External Filters, Programs and Commands

197

Advanced BashScripting Guide

interest_rate=$(echo "scale=9; $interest_r/12 + 1.0" | bc)

top=$(echo "scale=9; $principal*$interest_rate^$term" | bc) echo; echo "Please be patient. This may take a while." let "months = $term 1" # ==================================================================== for ((x=$months; x > 0; x)) do bot=$(echo "scale=9; $interest_rate^$x" | bc) bottom=$(echo "scale=9; $bottom+$bot" | bc) # bottom = $(($bottom + $bot")) done # # Rick Boivie pointed out a more efficient implementation #+ of the above loop, which decreases computation time by 2/3. # for ((x=1; x <= $months; x++)) # do # bottom=$(echo "scale=9; $bottom * $interest_rate + 1" | bc) # done

# And then he came up with an even more efficient alternative, #+ one that cuts down the run time by about 95%! # bottom=`{ # echo "scale=9; bottom=$bottom; interest_rate=$interest_rate" # for ((x=1; x <= $months; x++)) # do # echo 'bottom = bottom * interest_rate + 1' # done # echo 'bottom' # } | bc` # Embeds a 'for loop' within command substitution. # ==================================================================== # let "payment = $top/$bottom" payment=$(echo "scale=2; $top/$bottom" | bc) # Use two decimal places for dollars and cents. echo echo "monthly payment = \$$payment" echo

# Echo a dollar sign in front of amount.

exit 0 # Exercises: # 1) Filter # 2) Filter # 3) If you # expand

input to permit commas in principal amount. input to permit interest to be entered as percent or decimal. are really ambitious, this script to print complete amortization tables.

Example 1233. Base Conversion

Chapter 12. External Filters, Programs and Commands

198

Advanced BashScripting Guide

: ########################################################################## # Shellscript: base.sh print number to different bases (Bourne Shell) # Author : Heiner Steven ([email protected]) # Date : 070395 # Category : Desktop # $Id: base.sh,v 1.2 2000/02/06 19:55:35 heiner Exp $ ########################################################################## # Description # # Changes # 210395 stv fixed error occuring with 0xb as input (0.2) ########################################################################## # ==> Used in this document with the script author's permission. # ==> Comments added by document author. NOARGS=65 PN=`basename "$0"` VER=`echo '$Revision: 1.2 $' | cut d' ' f2`

# Program name # ==> VER=1.2

Usage () { echo "$PN print number to different bases, $VER (stv '95) usage: $PN [number ...] If no number is given, the numbers are read from standard input. A number may be binary (base 2) starting with 0b (i.e. 0b1100) octal (base 8) starting with 0 (i.e. 014) hexadecimal (base 16) starting with 0x (i.e. 0xc) decimal otherwise (i.e. 12)" >&2 exit $NOARGS } # ==> Function to print usage message. Msg () { for i # ==> in [list] missing. do echo "$PN: $i" >&2 done } Fatal () { Msg "$@"; exit 66; } PrintBases () { # Determine base of the number for i # ==> in [list] missing... do # ==> so operates on command line arg(s). case "$i" in 0b*) ibase=2;; # binary 0x*|[af]*|[AF]*) ibase=16;; # hexadecimal 0*) ibase=8;; # octal [19]*) ibase=10;; # decimal *) Msg "illegal number $i ignored" continue;; esac # Remove prefix, convert hex digits to uppercase (bc needs this) number=`echo "$i" | sed e 's:^0[bBxX]::' | tr '[af]' '[AF]'` # ==> Uses ":" as sed separator, rather than "/". # Convert number to decimal dec=`echo "ibase=$ibase; $number" | bc`

# ==> 'bc' is calculator utility.

Chapter 12. External Filters, Programs and Commands

199

Advanced BashScripting Guide

case "$dec" in [09]*) *) esac ;; continue;; # number ok # error: ignore

# Print all conversions in one line. # ==> 'here document' feeds command list to 'bc'. echo `bc <<! obase=16; "hex="; $dec obase=10; "dec="; $dec obase=8; "oct="; $dec obase=2; "bin="; $dec ! ` | sed e 's: : done } while [ $# gt 0 ] do case "$1" in ) shift; break;; h) Usage;; # ==> Help message. *) Usage;; *) break;; # first number esac # ==> More error checking for illegal input would be useful. shift done if [ $# gt 0 ] then PrintBases "$@" else while read line do PrintBases $line done fi :g'

# read from stdin

An alternate method of invoking bc involves using a here document embedded within a command substitution block. This is especially appropriate when a script needs to pass a list of options and commands to bc.
variable=`bc << LIMIT_STRING options statements operations LIMIT_STRING ` ...or...

variable=$(bc << LIMIT_STRING options statements operations LIMIT_STRING )

Chapter 12. External Filters, Programs and Commands

200

Advanced BashScripting Guide Example 1234. Invoking bc using a "here document"

#!/bin/bash # Invoking 'bc' using command substitution # in combination with a 'here document'.

var1=`bc << EOF 18.33 * 19.78 EOF ` echo $var1

# 362.56

# $( ... ) notation also works. v1=23.53 v2=17.881 v3=83.501 v4=171.63 var2=$(bc << EOF scale = 4 a = ( $v1 + $v2 ) b = ( $v3 * $v4 ) a * b + 15.35 EOF ) echo $var2 # 593487.8452

var3=$(bc l << EOF scale = 9 s ( 1.7 ) EOF ) # Returns the sine of 1.7 radians. # The "l" option calls the 'bc' math library. echo $var3 # .991664810

# Now, try it in a function... hyp= # Declare global variable. hypotenuse () # Calculate hypotenuse of a right triangle. { hyp=$(bc l << EOF scale = 9 sqrt ( $1 * $1 + $2 * $2 ) EOF ) # Unfortunately, can't return floating point values from a Bash function. } hypotenuse 3.68 7.31 echo "hypotenuse = $hyp"

# 8.184039344

exit 0

Example 1235. Calculating PI Chapter 12. External Filters, Programs and Commands 201

Advanced BashScripting Guide

#!/bin/bash # cannon.sh: Approximating PI by firing cannonballs. # This is a very simple instance of a "Monte Carlo" simulation, #+ a mathematical model of a reallife event, #+ using pseudorandom numbers to emulate random chance. # # #+ # # # # #+ # #+ # #+ # #+ # # #+ #+ # # #+ # # # # #+ # Consider a perfectly square plot of land, 10000 units on a side. This land has a perfectly circular lake in its center, with a diameter of 10000 units. The plot is actually all water, except for the four corners. (Think of it as a square with an inscribed circle.) Let us fire solid iron cannonballs from an oldstyle cannon at the square of land. All the shots impact somewhere on the plot of land, either in the lake or on the dry corners. Since the lake takes up most of the land area, most of the shots will SPLASH! into the water. Just a few shots will THUD! into solid ground in the far corners of the land. If we take enough random, unaimed shots at the plot of land, Then the ratio of SPLASHES to total shots will approximate the value of PI/4. The reason for this is that the cannon is actually shooting only at the upper righthand quadrant of the square. (The previous explanation was a simplification.) Theoretically, the more shots taken, the better the fit. However, a shell script, as opposed to a compiled language with floatingpoint math built in, requires a few compromises. This tends to make the simulation less accurate, unfortunately.

DIMENSION=10000

# Length of each side of the plot of land. # Also sets ceiling for random integers generated. # Fire this many shots. # 10000 or more would be better, but would take too long. # Scaling factor to approximate PI.

MAXSHOTS=1000 PMULTIPLIER=4.0

get_random () { SEED=$(head 1 /dev/urandom | od N 1 | awk '{ print $2 }') RANDOM=$SEED # From "seedingrandom.sh" #+ example script. let "rnum = $RANDOM % $DIMENSION" # Range less than 10000. echo $rnum } distance= # Declare global variable. hypotenuse () # Calculate hypotenuse of a right triangle. { # From "altbc.sh" example. distance=$(bc l << EOF scale = 0 sqrt ( $1 * $1 + $2 * $2 ) EOF ) # Setting "scale" to zero rounds down result to integer value, #+ a necessary compromise in this script.

Chapter 12. External Filters, Programs and Commands

202

Advanced BashScripting Guide

# } This diminshes the accuracy of the simulation, unfortunately.

# main() { # Initialize variables. shots=0 splashes=0 thuds=0 Pi=0 while [ "$shots" lt do "$MAXSHOTS" ] # Main loop.

xCoord=$(get_random) yCoord=$(get_random) hypotenuse $xCoord $yCoord ((shots++)) printf printf printf printf "#%4d " $shots "Xc = %4d " $xCoord "Yc = %4d " $yCoord "Distance = %5d " $distance

# Get random X and Y coords. # Hypotenuse of righttriangle = #+ distance.

# Distance from #+ center of lake, #+ coordinate (0,0).

if [ "$distance" le "$DIMENSION" ] then echo n "SPLASH! " ((splashes++)) else echo n "THUD! " ((thuds++)) fi Pi=$(echo "scale=9; $PMULTIPLIER*$splashes/$shots" | bc) # Multiply ratio by 4.0. echo n "PI ~ $Pi" echo done echo echo "After $shots shots, PI looks like approximately $Pi." # Tends to run a bit high... # Probably due to roundoff error and imperfect randomness of $RANDOM. echo # } exit 0 # #+ # # # # #+ One might well wonder whether a shell script is appropriate for an application as complex and computationintensive as a simulation. There 1) As 2) To it are at least two justifications. a proof of concept: to show it can be done. prototype and test the algorithms before rewriting in a compiled highlevel language.

dc Chapter 12. External Filters, Programs and Commands 203

Advanced BashScripting Guide The dc (desk calculator) utility is stackoriented and uses RPN ("Reverse Polish Notation"). Like bc, it has much of the power of a programming language. Most persons avoid dc, since it requires nonintuitive RPN input. Yet it has its uses.

Example 1236. Converting a decimal number to hexadecimal

#!/bin/bash # hexconvert.sh: Convert a decimal number to hexadecimal. BASE=16 # Hexadecimal.

if [ z "$1" ] then echo "Usage: $0 number" exit $E_NOARGS # Need a command line argument. fi # Exercise: add argument validity checking.

hexcvt () { if [ z "$1" ] then echo 0 return # "Return" 0 if no arg passed to function. fi echo ""$1" "$BASE" o p" | dc # "o" sets radix (numerical base) of output. # "p" prints the top of stack. # See 'man dc' for other options. return } hexcvt "$1" exit 0

Studying the info page for dc gives some insight into its intricacies. However, there seems to be a small, select group of dc wizards who delight in showing off their mastery of this powerful, but arcane utility.

Example 1237. Factoring

#!/bin/bash # factr.sh: Factor a number MIN=2 # Will not work for number smaller than this. E_NOARGS=65 E_TOOSMALL=66 if [ z $1 ] then echo "Usage: $0 number"

Chapter 12. External Filters, Programs and Commands

204

Advanced BashScripting Guide

exit $E_NOARGS fi if [ "$1" lt "$MIN" ] then echo "Number to factor must be $MIN or greater." exit $E_TOOSMALL fi # Exercise: Add type checking (to reject noninteger arg). echo "Factors of $1:" # echo "$1[p]s2[lip/dli%0=1dvsr]s12sid2%0=13sidvsr[dli%0=1lrli2+dsi!>.]ds.xd1<2" | dc # # Above line of code written by Michel Charpentier <[email protected]>. # Used with permission (thanks). exit 0

awk Yet another way of doing floating point math in a script is using awk's builtin math functions in a shell wrapper.

Example 1238. Calculating the hypotenuse of a triangle

#!/bin/bash # hypotenuse.sh: Returns the "hypotenuse" of a right triangle. # ( square root of sum of squares of the "legs") ARGS=2 E_BADARGS=65 # Script needs sides of triangle passed. # Wrong number of arguments.

if [ $# ne "$ARGS" ] # Test number of arguments to script. then echo "Usage: `basename $0` side_1 side_2" exit $E_BADARGS fi

AWKSCRIPT=' { printf( "%3.7f\n", sqrt($1*$1 + $2*$2) ) } ' # command(s) / parameters passed to awk

echo n "Hypotenuse of $1 and $2 = " echo $1 $2 | awk "$AWKSCRIPT" exit 0

12.9. Miscellaneous Commands

Command that fit in no special category jot, seq These utilities emit a sequence of integers, with a userselected increment.

Chapter 12. External Filters, Programs and Commands

205

Advanced BashScripting Guide The normal separator character between each integer is a newline, but this can be changed with the s option.
bash$ seq 5 1 2 3 4 5

bash$ seq s : 5 1:2:3:4:5

Both jot and seq come in handy in a for loop.

Example 1239. Using seq to generate loop arguments

#!/bin/bash # Using "seq" echo for a in `seq 80` # or for a in $( seq 80 ) # Same as for a in 1 2 3 4 5 ... 80 (saves much typing!). # May also use 'jot' (if present on system). do echo n "$a " done # 1 2 3 4 5 ... 80 # Example of using the output of a command to generate # the [list] in a "for" loop. echo; echo

COUNT=80

# Yes, 'seq' may also take a replaceable parameter. for a in $( seq $COUNT )

for a in `seq $COUNT` # or do echo n "$a " done # 1 2 3 4 5 ... 80 echo; echo BEGIN=75 END=80

for a in `seq $BEGIN $END` # Giving "seq" two arguments starts the count at the first one, #+ and continues until it reaches the second. do echo n "$a " done # 75 76 77 78 79 80 echo; echo BEGIN=45

Chapter 12. External Filters, Programs and Commands

206

Advanced BashScripting Guide

INTERVAL=5 END=80 for a in `seq $BEGIN $INTERVAL $END` # Giving "seq" three arguments starts the count at the first one, #+ uses the second for a step interval, #+ and continues until it reaches the third. do echo n "$a " done # 45 50 55 60 65 70 75 80 echo; echo exit 0

getopt The getopt command parses commandline options preceded by a dash. This external command corresponds to the getopts Bash builtin, but it is not nearly as versatile.

Example 1240. Using getopt to parse commandline options

#!/bin/bash # Try the following when invoking this script. # sh ex33a a # sh ex33a abc # sh ex33a a b c # sh ex33a d # sh ex33a dXYZ # sh ex33a d XYZ # sh ex33a abcd # sh ex33a abcdZ # sh ex33a z # sh ex33a a # Explain the results of each of the above. E_OPTERR=65 if [ "$#" eq 0 ] then # Script needs at least one commandline argument. echo "Usage $0 [options a,b,c]" exit $E_OPTERR fi set `getopt "abcd:" "$@"` # Sets positional parameters to commandline arguments. # What happens if you use "$*" instead of "$@"? while [ ! z "$1" ] do case "$1" in a) echo "Option b) echo "Option c) echo "Option d) echo "Option *) break;; esac shift done

\"a\"";; \"b\"";; \"c\"";; \"d\" $2";;

Chapter 12. External Filters, Programs and Commands

207

Advanced BashScripting Guide

# It is better to use the 'getopts' builtin in a script, #+ rather than 'getopt'. # See "ex33.sh". exit 0

runparts The runparts command [33] executes all the scripts in a target directory, sequentially in ASCIIsorted filename order. Of course, the scripts need to have execute permission. The crond daemon invokes runparts to run the scripts in the /etc/cron.* directories. yes In its default behavior the yes command feeds a continuous string of the character y followed by a line feed to stdout. A controlc terminates the run. A different output string may be specified, as in yes different string, which would continually output different string to stdout. One might well ask the purpose of this. From the command line or in a script, the output of yes can be redirected or piped into a program expecting user input. In effect, this becomes a sort of poor man's version of expect. yes | fsck /dev/hda1 runs fsck noninteractively (careful!). yes | rm r dirname has same effect as rm rf dirname (careful!). Caution advised when piping yes to a potentially dangerous system command, such as fsck or fdisk. It may have unintended sideeffects. banner Prints arguments as a large vertical banner to stdout, using an ASCII character (default '#'). This may be redirected to a printer for hardcopy. printenv Show all the environmental variables set for a particular user.
bash$ printenv | grep HOME HOME=/home/bozo

lp The lp and lpr commands send file(s) to the print queue, to be printed as hard copy. [34] These commands trace the origin of their names to the line printers of another era. bash$ lp file1.txt or bash lp <file1.txt It is often useful to pipe the formatted output from pr to lp. bash$ pr options file1.txt | lp Formatting packages, such as groff and Ghostscript may send their output directly to lp. bash$ groff Tascii file.tr | lp bash$ gs options | lp file.ps Related commands are lpq, for viewing the print queue, and lprm, for removing jobs from the print queue. Chapter 12. External Filters, Programs and Commands 208

Advanced BashScripting Guide tee [UNIX borrows an idea here from the plumbing trade.] This is a redirection operator, but with a difference. Like the plumber's "tee," it permits "siponing off" to a file the output of a command or commands within a pipe, but without affecting the result. This is useful for printing an ongoing process to a file or paper, perhaps to keep track of it for debugging purposes.
tee |> to file | ===============|=============== command>|operator>> result of command(s) ===============================

cat listfile* | sort | tee check.file | uniq > result.file

(The file check.file contains the concatenated sorted "listfiles", before the duplicate lines are removed by uniq.) mkfifo This obscure command creates a named pipe, a temporary firstinfirstout buffer for transferring data between processes. [35] Typically, one process writes to the FIFO, and the other reads from it. See Example A16. pathchk This command checks the validity of a filename. If the filename exceeds the maximum allowable length (255 characters) or one or more of the directories in its path is not searchable, then an error message results. Unfortunately, pathchk does not return a recognizable error code, and it is therefore pretty much useless in a script. Consider instead the file test operators. dd This is the somewhat obscure and much feared "data duplicator" command. Originally a utility for exchanging data on magnetic tapes between UNIX minicomputers and IBM mainframes, this command still has its uses. The dd command simply copies a file (or stdin/stdout), but with conversions. Possible conversions are ASCII/EBCDIC, [36] upper/lower case, swapping of byte pairs between input and output, and skipping and/or truncating the head or tail of the input file. A dd help lists the conversion and other options that this powerful utility takes.
# Exercising 'dd'. n=3 p=5 input_file=project.txt output_file=log.txt dd if=$input_file of=$output_file bs=1 skip=$((n1)) count=$((pn+1)) 2> /dev/null # Extracts characters n to p from file $input_file.

echo n "hello world" | dd cbs=1 conv=unblock 2> /dev/null # Echoes "hello world" vertically.

Chapter 12. External Filters, Programs and Commands

209

Advanced BashScripting Guide

# Thanks, S.C.

To demonstrate just how versatile dd is, let's use it to capture keystrokes.

Example 1241. Capturing Keystrokes

#!/bin/bash # Capture keystrokes without needing to press ENTER.

keypresses=4

# Number of keypresses to capture.

old_tty_setting=$(stty g) echo "Press $keypresses keys." stty icanon echo

# Save old terminal settings.

# Disable canonical mode. # Disable local echo. keys=$(dd bs=1 count=$keypresses 2> /dev/null) # 'dd' uses stdin, if "if" not specified. stty "$old_tty_setting" # Restore old terminal settings.

echo "You pressed the \"$keys\" keys." # Thanks, S.C. for showing the way. exit 0

The dd command can do random access on a data stream.

echo n . | dd bs=1 seek=4 of=file conv=notrunc # The "conv=notrunc" option means that the output file will not be truncated. # Thanks, S.C.

The dd command can copy raw data and disk images to and from devices, such as floppies and tape drives (Example A6). A common use is creating boot floppies. dd if=kernelimage of=/dev/fd0H1440 Similarly, dd can copy the entire contents of a floppy, even one formatted with a "foreign" OS, to the hard drive as an image file. dd if=/dev/fd0 of=/home/bozo/projects/floppy.img Other applications of dd include initializing temporary swap files (Example 292) and ramdisks (Example 293). It can even do a lowlevel copy of an entire hard drive partition, although this is not necessarily recommended. People (with presumably nothing better to do with their time) are constantly thinking of interesting applications of dd.

Chapter 12. External Filters, Programs and Commands

210

Advanced BashScripting Guide Example 1242. Securely deleting a file

#!/bin/bash # blotout.sh: Erase all traces of a file. # #+ # #+ This script overwrites a target file alternately with random bytes, then zeros before finally deleting it. After that, even examining the raw disk sectors will not reveal the original file data. # Number of fileshredding passes. # I/O with /dev/urandom requires unit block size, #+ otherwise you get weird results.

PASSES=7 BLOCKSIZE=1 E_BADARGS=70 E_NOT_FOUND=71 E_CHANGED_MIND=72

if [ z "$1" ] # No filename specified. then echo "Usage: `basename $0` filename" exit $E_BADARGS fi file=$1 if [ ! e "$file" ] then echo "File \"$file\" not found." exit $E_NOT_FOUND fi echo; echo n "Are you absolutely sure you want to blot out \"$file\" (y/n)? " read answer case "$answer" in [nN]) echo "Changed your mind, huh?" exit $E_CHANGED_MIND ;; *) echo "Blotting out file \"$file\".";; esac

flength=$(ls l "$file" | awk '{print $5}') pass_count=1 echo

# Field 5 is file length.

while [ "$pass_count" le "$PASSES" ] do echo "Pass #$pass_count" sync # Flush buffers. dd if=/dev/urandom of=$file bs=$BLOCKSIZE count=$flength # Fill with random bytes. sync # Flush buffers again. dd if=/dev/zero of=$file bs=$BLOCKSIZE count=$flength # Fill with zeros. sync # Flush buffers yet again. let "pass_count += 1" echo done

Chapter 12. External Filters, Programs and Commands

211

Advanced BashScripting Guide

rm f $file sync # Finally, delete scrambled and shredded file. # Flush buffers a final time.

echo "File \"$file\" blotted out and deleted."; echo

# #+ #+ #+

This is a fairly secure, if inefficient and slow method of thoroughly "shredding" a file. The "shred" command, part of the GNU "fileutils" package, does the same thing, but more efficiently.

# The file cannot not be "undeleted" or retrieved by normal methods. # However... #+ this simple method will likely *not* withstand forensic analysis.

# Tom Vier's "wipe" filedeletion package does a much more thorough job #+ of file shredding than this simple script. # http://www.ibiblio.org/pub/Linux/utils/file/wipe2.0.0.tar.bz2 # For an indepth analysis on the topic of file deletion and security, #+ see Peter Gutmann's paper, #+ "Secure Deletion of Data From Magnetic and SolidState Memory". # http://www.cs.auckland.ac.nz/~pgut001/pubs/secure_del.html

exit 0

od The od, or octal dump filter converts input (or files) to octal (base8) or other bases. This is useful for viewing or processing binary data files or otherwise unreadable system device files, such as /dev/urandom, and as a filter for binary data. See Example 926 and Example 1210. hexdump Performs a hexadecimal, octal, decimal, or ASCII dump of a binary file. This command is the rough equivalent of od, above, but not nearly as useful. objdump Displays an object file or binary executable in either hexadecimal form or as a disassembled listing (with the d option).
bash$ objdump d /bin/ls /bin/ls: file format elf32i386 Disassembly of section .init: 080490bc <.init>: 80490bc: 55 80490bd: 89 e5 . . .

push mov

%ebp %esp,%ebp

mcookie This command generates a "magic cookie", a 128bit (32character) pseudorandom hexadecimal number, normally used as an authorization "signature" by the X server. This also available for use in a script as a "quick 'n dirty" random number.
random000=`mcookie | sed e '2p'` # Uses 'sed' to strip off extraneous characters.

Of course, a script could use md5 for the same purpose. Chapter 12. External Filters, Programs and Commands 212

Advanced BashScripting Guide

# Generate md5 checksum on the script itself. random001=`md5sum $0 | awk '{print $1}'` # Uses 'awk' to strip off the filename.

The mcookie command gives yet another way to generate a "unique" filename.

Example 1243. Filename generator

#!/bin/bash # tempfilename.sh: BASE_STR=`mcookie` POS=11 LEN=5 prefix=temp

temp filename generator # 32character magic cookie. # Arbitrary position in magic cookie string. # Get $LEN consecutive characters. # This is, after all, a "temp" file. # For more "uniqueness," generate the filename prefix #+ using the same method as the suffix, below.

suffix=${BASE_STR:POS:LEN} # Extract a 5character string, starting at position 11. temp_filename=$prefix.$suffix # Construct the filename. echo "Temp filename = "$temp_filename"" # sh tempfilename.sh # Temp filename = temp.e19ea exit 0

units This utility converts between different units of measure. While normally invoked in interactive mode, units may find use in a script.

Example 1244. Converting meters to miles

#!/bin/bash # unitconversion.sh

convert_units () # Takes as arguments the units to convert. { cf=$(units "$1" "$2" | sed silent e '1p' | awk '{print $2}') # Strip off everything except the actual conversion factor. echo "$cf" } Unit1=miles Unit2=meters cfactor=`convert_units $Unit1 $Unit2` quantity=3.73 result=$(echo $quantity*$cfactor | bc) echo "There are $result $Unit2 in $quantity $Unit1."

Chapter 12. External Filters, Programs and Commands

213

Advanced BashScripting Guide

# What happens if you pass incompatible units, #+ such as "acres" and "miles" to the function? exit 0

m4 A hidden treasure, m4 is a powerful macro processing filter, [37] virtually a complete language. Although originally written as a preprocessor for RatFor, m4 turned out to be useful as a standalone utility. In fact, m4 combines some of the functionality of eval, tr, and awk, in addition to its extensive macro expansion facilities. The April, 2002 issue of Linux Journal has a very nice article on m4 and its uses.

Example 1245. Using m4

#!/bin/bash # m4.sh: Using the m4 macro processor # Strings string=abcdA01 echo "len($string)" | m4 echo "substr($string,4)" | m4 echo "regexp($string,[01][01],\&Z)" | m4 # Arithmetic echo "incr(22)" | m4 echo "eval(99 / 3)" | m4 exit 0

# 7 # A01 # 01Z

# 23 # 33

doexec The doexec command enables passing an arbitrary list of arguments to a binary executable. In particular, passing argv[0] (which corresponds to $0 in a script) lets the executable be invoked by various names, and it can then carry out different sets of actions, according to the name by which it was called. What this amounts to is roundabout way of passing options to an executable. For example, the /usr/local/bin directory might contain a binary called "aaa". Invoking doexec /usr/local/bin/aaa list would list all those files in the current working directory beginning with an "a", while invoking (the same executable with) doexec /usr/local/bin/aaa delete would delete those files. The various behaviors of the executable must be defined within the code of the executable itself, analogous to something like the following in a shell script:
case `basename $0` in "name1" ) do_something;; "name2" ) do_something_else;; "name3" ) do_yet_another_thing;; * ) bail_out;; esac

dialog The dialog family of tools provide a method of calling interactive "dialog" boxes from a script. The more elaborate variations of dialog gdialog, Xdialog, and kdialog actually invoke XWindows widgets. See Example 3414.

Chapter 12. External Filters, Programs and Commands

214

Chapter 13. System and Administrative Commands

The startup and shutdown scripts in /etc/rc.d illustrate the uses (and usefulness) of many of these comands. These are usually invoked by root and used for system maintenance or emergency filesystem repairs. Use with caution, as some of these commands may damage your system if misused. Users and Groups users Show all logged on users. This is the approximate equivalent of who q. groups Lists the current user and the groups she belongs to. This corresponds to the $GROUPS internal variable, but gives the group names, rather than the numbers.
bash$ groups bozita cdrom cdwriter audio xgrp bash$ echo $GROUPS 501

chown, chgrp The chown command changes the ownership of a file or files. This command is a useful method that root can use to shift file ownership from one user to another. An ordinary user may not change the ownership of files, not even her own files. [38]
root# chown bozo *.txt

The chgrp command changes the group ownership of a file or files. You must be owner of the file(s) as well as a member of the destination group (or root) to use this operation.
chgrp recursive dunderheads *.data # The "dunderheads" group will now own all the "*.data" files #+ all the way down the $PWD directory tree (that's what "recursive" means).

useradd, userdel The useradd administrative command adds a user account to the system and creates a home directory for that particular user, if so specified. The corresponding userdel command removes a user account from the system [39] and deletes associated files. The adduser command is a synonym for useradd and is usually a symbolic link to it. id The id command lists the real and effective user IDs and the group IDs of the current user. This is the counterpart to the $UID, $EUID, and $GROUPS internal Bash variables.
bash$ id uid=501(bozo) gid=501(bozo) groups=501(bozo),22(cdrom),80(cdwriter),81(audio) bash$ echo $UID 501

Also see Example 95. Chapter 13. System and Administrative Commands 215

Advanced BashScripting Guide who Show all users logged on to the system.
bash$ who bozo tty1 bozo pts/0 bozo pts/1 bozo pts/2

Apr 27 17:45 Apr 27 17:46 Apr 27 17:47 Apr 27 17:49

The m gives detailed information about only the current user. Passing any two arguments to who is the equivalent of who m, as in who am i or who The Man.
bash$ who m localhost.localdomain!bozo

pts/2

Apr 27 17:49

whoami is similar to who m, but only lists the user name.

bash$ whoami bozo

w Show all logged on users and the processes belonging to them. This is an extended version of who. The output of w may be piped to grep to find a specific user and/or process.
bash$ w | grep startx bozo tty1

4:22pm

6:41

4.47s

0.45s

startx

logname Show current user's login name (as found in /var/run/utmp). This is a nearequivalent to whoami, above.
bash$ logname bozo bash$ whoami bozo

However...
bash$ su Password: ...... bash# whoami root bash# logname bozo

su Runs a program or script as a substitute user. su rjones starts a shell as user rjones. A naked su defaults to root. See Example A16. sudo Runs a command as root (or another user). This may be used in a script, thus permitting a regular user to run the script.

Chapter 13. System and Administrative Commands

216

Advanced BashScripting Guide

#!/bin/bash # Some commands. sudo cp /root/secretfile /home/bozo/secret # Some more commands.

The file /etc/sudoers holds the names of users permitted to invoke sudo. passwd Sets or changes a user's password. The passwd can be used in a script, but should not be.
#!/bin/bash # setnewpassword.sh: Not a good idea. # This script must be run as root, #+ or better yet, not run at all. ROOT_UID=0 E_WRONG_USER=65 # Root has $UID 0. # Not root?

if [ "$UID" ne "$ROOT_UID" ] then echo; echo "Only root can run this script."; echo exit $E_WRONG_USER else echo; echo "You should know better than to run this script, root." fi

username=bozo NEWPASSWORD=security_violation echo "$NEWPASSWORD" | passwd stdin "$username" # The 'stdin' option to 'passwd' permits #+ getting new password from stdin (or a pipe). echo; echo "User $username's password changed!" # Using the 'passwd' command in a script is dangerous. exit 0

ac Show users' logged in time, as read from /var/log/wtmp. This is one of the GNU accounting utilities.
bash$ ac total

68.08

last List last logged in users, as read from /var/log/wtmp. This command can also show remote logins. newgrp Change user's group ID without logging out. This permits access to the new group's files. Since users may be members of multiple groups simultaneously, this command finds little use. Terminals tty Chapter 13. System and Administrative Commands 217

Advanced BashScripting Guide Echoes the name of the current user's terminal. Note that each separate xterm window counts as a different terminal.
bash$ tty /dev/pts/1

stty Shows and/or changes terminal settings. This complex command, used in a script, can control terminal behavior and the way output displays. See the info page, and study it carefully.

Example 131. Setting an erase character

#!/bin/bash # erase.sh: Using "stty" to set an erase character when reading input. echo n "What is your name? " read name

# Try to backspace #+ to erase characters of input. # Won't work.

echo "Your name is $name." stty echo read echo erase '#' n "What is your name? " name "Your name is $name." # # Set "hashmark" (#) as erase character. Use # to erase last character typed.

exit 0

Example 132. secret password: Turning off terminal echoing

#!/bin/bash echo echo read echo echo echo

n "Enter password " passwd "password is $passwd" n "If someone had been looking over your shoulder, " "your password would have been compromised." # Two linefeeds in an "and list". # Turns off screen echo.

echo && echo stty echo

echo n "Enter password again " read passwd echo echo "password is $passwd" echo stty echo exit 0 # Restores screen echo.

A creative use of stty is detecting a user keypress (without hitting ENTER).

Chapter 13. System and Administrative Commands

218

Advanced BashScripting Guide Example 133. Keypress detection

#!/bin/bash # keypress.sh: Detect a user keypress ("hot keyboard"). echo old_tty_settings=$(stty g) stty icanon Keypress=$(head c1) # Save old settings. # or $(dd bs=1 count=1 2> /dev/null) # on nonGNU systems

echo echo "Key pressed was \""$Keypress"\"." echo stty "$old_tty_settings" # Thanks, Stephane Chazelas. exit 0 # Restore old settings.

Also see Example 93.

terminals and modes Normally, a terminal works in the canonical mode. When a user hits a key, the resulting character does not immediately go to the program actually running in this terminal. A buffer local to the terminal stores keystrokes. When the user hits the ENTER key, this sends all the stored keystrokes to the program running. There is even a basic line editor inside the terminal.
bash$ stty a speed 9600 baud; rows 36; columns 96; line = 0; intr = ^C; quit = ^\; erase = ^H; kill = ^U; eof = ^D; eol = <undef>; eol2 = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; ... isig icanon iexten echo echoe echok echonl noflsh xcase tostop echoprt

Using canonical mode, it is possible to redefine the special keys for the local terminal line editor.
bash$ cat > filexxx wha<ctlW>I<ctlH>foo bar<ctlU>hello world<ENTER> <ctlD> bash$ cat filexxx hello world bash$ bash$ wc c < file 13

The process controlling the terminal receives only 13 characters (12 alphabetic ones, plus a newline), although the user hit 26 keys. In noncanonical ("raw") mode, every key hit (including special editing keys such as ctlH) sends a character immediately to the controlling process. Chapter 13. System and Administrative Commands 219

Advanced BashScripting Guide The Bash prompt disables both icanon and echo, since it replaces the basic terminal line editor with its own more elaborate one. For example, when you hit ctlA at the Bash prompt, there's no ^A echoed by the terminal, but Bash gets a \1 character, interprets it, and moves the cursor to the begining of the line. Stephane Chazelas tset Show or initialize terminal settings. This is a less capable version of stty.
bash$ tset r Terminal type is xtermxfree86. Kill is controlU (^U). Interrupt is controlC (^C).

setserial Set or display serial port parameters. This command must be run by root user and is usually found in a system setup script.
# From /etc/pcmcia/serial script: IRQ=`setserial /dev/$DEVICE | sed e 's/.*IRQ: //'` setserial /dev/$DEVICE irq 0 ; setserial /dev/$DEVICE irq $IRQ

getty, agetty The initialization process for a terminal uses getty or agetty to set it up for login by a user. These commands are not used within user shell scripts. Their scripting counterpart is stty. mesg Enables or disables write access to the current user's terminal. Disabling access would prevent another user on the network to write to the terminal. It can be very annoying to have a message about ordering pizza suddenly appear in the middle of the text file you are editing. On a multiuser network, you might therefore wish to disable write access to your terminal when you need to avoid interruptions. wall This is an acronym for "write all", i.e., sending a message to all users at every terminal logged into the network. It is primarily a system administrator's tool, useful, for example, when warning everyone that the system will shortly go down due to a problem (see Example 172).
bash$ wall System going down for maintenance in 5 minutes! Broadcast message from bozo (pts/1) Sun Jul 8 13:53:27 2001... System going down for maintenance in 5 minutes!

If write access to a particular terminal has been disabled with mesg, then wall cannot send a message to it. dmesg Lists all system bootup messages to stdout. Handy for debugging and ascertaining which device drivers were installed and which system interrupts in use. The output of dmesg may, of course, be parsed with grep, sed, or awk from within a script.
bash$ dmesg | grep hda Kernel command line: ro root=/dev/hda2 hda: IBMDLGA23080, ATA DISK drive

Chapter 13. System and Administrative Commands

220

Advanced BashScripting Guide

hda: 6015744 sectors (3080 MB) w/96KiB Cache, CHS=746/128/63 hda: hda1 hda2 hda3 < hda5 hda6 hda7 > hda4

Information and Statistics uname Output system specifications (OS, kernel version, etc.) to stdout. Invoked with the a option, gives verbose system info (see Example 124). The s option shows only the OS type.
bash$ uname a Linux localhost.localdomain 2.2.152.5.0 #1 Sat Feb 5 00:13:43 EST 2000 i686 unknown bash$ uname s Linux

arch Show system architecture. Equivalent to uname m. See Example 1026.

bash$ arch i686 bash$ uname m i686

lastcomm Gives information about previous commands, as stored in the /var/account/pacct file. Command name and user name can be specified by options. This is one of the GNU accounting utilities. lastlog List the last login time of all system users. This references the /var/log/lastlog file.
bash$ lastlog root tty1 bin daemon ... bozo tty1

Fri Dec 7 18:43:21 0700 2001 **Never logged in** **Never logged in** Sat Dec 8 21:14:29 0700 2001

bash$ lastlog | grep root root tty1

Fri Dec

7 18:43:21 0700 2001

This command will fail if the user invoking it does not have read permission for the /var/log/lastlog file. lsof List open files. This command outputs a detailed table of all currently open files and gives information about their owner, size, the processes associated with them, and more. Of course, lsof may be piped to grep and/or awk to parse and analyze its results.
bash$ lsof COMMAND PID init 1 init 1 init 1

USER root root root

FD mem mem mem

TYPE REG REG REG

DEVICE 3,5 3,5 3,5

SIZE 30748 73120 931668

NODE NAME 30303 /sbin/init 8069 /lib/ld2.1.3.so 8075 /lib/libc2.1.3.so

Chapter 13. System and Administrative Commands

221

Advanced BashScripting Guide

cardmgr ... 213 root mem REG 3,5 36956 30357 /sbin/cardmgr

strace Diagnostic and debugging tool for tracing system calls and signals. The simplest way of invoking it is strace COMMAND.
bash$ strace df execve("/bin/df", ["df"], [/* 45 vars */]) = 0 uname({sys="Linux", node="bozo.localdomain", ...}) = 0 brk(0) = 0x804f5e4 ...

This is the Linux equivalent of truss. nmap Network port scanner. This command scans a server to locate open ports and the services associated with those ports. It is an important security tool for locking down a network against hacking attempts.
#!/bin/bash SERVER=$HOST PORT_NUMBER=25 # localhost.localdomain (127.0.0.1). # SMTP port.

nmap $SERVER | grep w "$PORT_NUMBER" # Is that particular port open? # grep w matches whole words only, #+ so this wouldn't match port 1025, for example. exit 0 # 25/tcp open smtp

free Shows memory and cache usage in tabular form. The output of this command lends itself to parsing, using grep, awk or Perl. The procinfo command shows all the information that free does, and much more.
bash$ free total Mem: 30504 /+ buffers/cache: Swap: 68540 used 28624 10640 3128 free 1880 19864 65412 shared 15820 buffers 1608 cached 16376

To show unused RAM memory:

bash$ free | grep Mem | awk '{ print $4 }' 1880

procinfo Extract and list information and statistics from the /proc pseudofilesystem. This gives a very extensive and detailed listing.
bash$ procinfo | grep Bootup Bootup: Wed Mar 21 15:15:50 2001

Load average: 0.04 0.21 0.34 3/47 6829

lsdev List devices, that is, show installed hardware.

Chapter 13. System and Administrative Commands

222

Advanced BashScripting Guide

bash$ lsdev Device DMA IRQ I/O Ports cascade 4 2 dma 0080008f dma1 0000001f dma2 00c000df fpu 00f000ff ide0 14 01f001f7 03f603f6 ...

du Show (disk) file usage, recursively. Defaults to current working directory, unless otherwise specified.
bash$ du ach 1.0k ./wi.sh 1.0k ./tst.sh 1.0k ./random.file 6.0k . 6.0k total

df Shows filesystem usage in tabular form.

bash$ df Filesystem /dev/hda5 /dev/hda8 /dev/hda7

1kblocks 273262 222525 1408796

Used Available Use% Mounted on 92607 166547 36% / 123951 87085 59% /home 1075744 261488 80% /usr

stat Gives detailed and verbose statistics on a given file (even a directory or device file) or set of files.
bash$ stat test.cru File: "test.cru" Size: 49970 Allocated Blocks: 100 Filetype: Regular File Mode: (0664/rwrwr) Uid: ( 501/ bozo) Gid: ( 501/ bozo) Device: 3,8 Inode: 18185 Links: 1 Access: Sat Jun 2 16:40:24 2001 Modify: Sat Jun 2 16:40:24 2001 Change: Sat Jun 2 16:40:24 2001

If the target file does not exist, stat returns an error message.
bash$ stat nonexistentfile nonexistentfile: No such file or directory

vmstat Display virtual memory statistics.

bash$ vmstat procs r b w swpd 0 0 0 0

free 11040

buff 2636

memory cache 38952

si 0

swap so 0

bi 33

io system bo in 7 271

cs 88

us 8

cpu sy id 3 89

netstat Show current network statistics and information, such as routing tables and active connections. This utility accesses information in /proc/net (Chapter 28). See Example 282. Chapter 13. System and Administrative Commands 223

Advanced BashScripting Guide netstat r is equivalent to route. uptime Shows how long the system has been running, along with associated statistics.
bash$ uptime 10:28pm up 1:57,

3 users,

load average: 0.17, 0.34, 0.27

hostname Lists the system's host name. This command sets the host name in an /etc/rc.d setup script (/etc/rc.d/rc.sysinit or similar). It is equivalent to uname n, and a counterpart to the $HOSTNAME internal variable.
bash$ hostname localhost.localdomain bash$ echo $HOSTNAME localhost.localdomain

hostid Echo a 32bit hexadecimal numerical identifier for the host machine.
bash$ hostid 7f0100

This command allegedly fetches a "unique" serial number for a particular system. Certain product registration procedures use this number to brand a particular user license. Unfortunately, hostid only returns the machine network address in hexadecimal, with pairs of bytes transposed. The network address of a typical nonnetworked Linux machine, is found in /etc/hosts.
bash$ cat /etc/hosts 127.0.0.1

localhost.localdomain localhost

As it happens, transposing the bytes of 127.0.0.1, we get 0.127.1.0, which translates in hex to 007f0100, the exact equivalent of what hostid returns, above. There exist only a few million other Linux machines with this identical hostid. sar Invoking sar (system activity report) gives a very detailed rundown on system statistics. This command is found on some commercial UNIX systems, but is not part of the base Linux distribution. It is contained in the sysstat utilities package, written by Sebastien Godard.
bash$ sar Linux 2.4.710 (localhost.localdomain) 10:30:01 10:40:00 10:50:00 11:00:00 11:10:00 11:20:00 06:30:00 Average: AM AM AM AM AM AM PM CPU all all all all all all all %user 1.39 76.83 1.32 1.17 0.51 100.00 1.39

12/31/2001 %system 0.77 1.45 0.69 0.30 0.30 100.01 0.66 %idle 97.84 21.72 97.99 98.53 99.19 0.00 97.95

%nice 0.00 0.00 0.00 0.00 0.00 0.00 0.00

readelf Chapter 13. System and Administrative Commands 224

Advanced BashScripting Guide Show information and statistics about a designated elf binary. This is part of the binutils package.
bash$ readelf h /bin/bash ELF Header: Magic: 7f 45 4c 46 01 01 01 00 00 00 00 00 00 00 00 00 Class: ELF32 Data: 2's complement, little endian Version: 1 (current) OS/ABI: UNIX System V ABI Version: 0 Type: EXEC (Executable file) . . .

size The size [/path/to/binary] command gives the segment sizes of a binary executable or archive file. This is mainly of use to programmers.
bash$ size /bin/bash text data bss 495971 22496 17392

dec 535859

hex filename 82d33 /bin/bash

System Logs logger Appends a usergenerated message to the system log (/var/log/messages). You do not have to be root to invoke logger.
logger Experiencing instability in network connection at 23:10, 05/21. # Now, do a 'tail /var/log/messages'.

By embedding a logger command in a script, it is possible to write debugging information to /var/log/messages.

logger t $0 i Logging at line "$LINENO". # The "t" option specifies the tag for the logger entry. # The "i" option records the process ID. # tail /var/log/message # ... # Jul 7 20:48:58 localhost ./test.sh[1712]: Logging at line 3.

logrotate This utility manages the system log files, rotating, compressing, deleting, and/or mailing them, as appropriate. Usually crond runs logrotate on a daily basis. Adding an appropriate entry to /etc/logrotate.conf makes it possible to manage personal log files, as well as systemwide ones. Job Control ps Process Statistics: lists currently executing processes by owner and PID (process id). This is usually invoked with ax options, and may be piped to grep or sed to search for a specific process (see Example 1110 and Example 281).

Chapter 13. System and Administrative Commands

225

Advanced BashScripting Guide

bash$ 295 ? ps ax | grep sendmail S 0:00 sendmail: accepting connections on port 25

pstree Lists currently executing processes in "tree" format. The p option shows the PIDs, as well as the process names. top Continuously updated display of most cpuintensive processes. The b option displays in text mode, so that the output may be parsed or accessed from a script.
bash$ top b 8:30pm up 3 min, 3 users, load average: 0.49, 0.32, 0.13 45 processes: 44 sleeping, 1 running, 0 zombie, 0 stopped CPU states: 13.6% user, 7.3% system, 0.0% nice, 78.9% idle Mem: 78396K av, 65468K used, 12928K free, 0K shrd, Swap: 157208K av, 0K used, 157208K free PID 848 1 2 ... USER bozo root root PRI 17 8 9 NI 0 0 0 SIZE 996 512 0 RSS SHARE STAT %CPU %MEM 996 800 R 5.6 1.2 512 444 S 0.0 0.6 0 0 SW 0.0 0.0 TIME 0:00 0:04 0:00

2352K buff 37244K cached

COMMAND top init keventd

nice Run a background job with an altered priority. Priorities run from 19 (lowest) to 20 (highest). Only root may set the negative (higher) priorities. Related commands are renice, snice, and skill. nohup Keeps a command running even after user logs off. The command will run as a foreground process unless followed by &. If you use nohup within a script, consider coupling it with a wait to avoid creating an orphan or zombie process. pidof Identifies process id (pid) of a running job. Since job control commands, such as kill and renice act on the pid of a process (not its name), it is sometimes necessary to identify that pid. The pidof command is the approximate counterpart to the $PPID internal variable.
bash$ pidof xclock 880

Example 134. pidof helps kill a process

#!/bin/bash # killprocess.sh NOPROCESS=2 process=xxxyyyzzz # Use nonexistent process. # For demo purposes only... # ... don't want to actually kill any actual process with this script. # # If, for example, you wanted to use this script to logoff the Internet, # process=pppd t=`pidof $process` # Find pid (process id) of $process. # The pid is needed by 'kill' (can't 'kill' by program name).

Chapter 13. System and Administrative Commands

226

Advanced BashScripting Guide

if [ z "$t" ] # If process not present, 'pidof' returns null. then echo "Process $process was not running." echo "Nothing killed." exit $NOPROCESS fi kill $t # May need 'kill 9' for stubborn process.

# Need a check here to see if process allowed itself to be killed. # Perhaps another " t=`pidof $process` ".

# This entire script could be replaced by # kill $(pidof x process_name) # but it would not be as instructive. exit 0

fuser Identifies the processes (by pid) that are accessing a given file, set of files, or directory. May also be invoked with the k option, which kills those processes. This has interesting implications for system security, especially in scripts preventing unauthorized users from accessing system services. crond Administrative program scheduler, performing such duties as cleaning up and deleting system log files and updating the slocate database. This is the superuser version of at (although each user may have their own crontab file which can be changed with the crontab command). It runs as a daemon and executes scheduled entries from /etc/crontab. Process Control and Booting init The init command is the parent of all processes. Called in the final step of a bootup, init determines the runlevel of the system from /etc/inittab. Invoked by its alias telinit, and by root only. telinit Symlinked to init, this is a means of changing the system runlevel, usually done for system maintenance or emergency filesystem repairs. Invoked only by root. This command can be dangerous be certain you understand it well before using! runlevel Shows the current and last runlevel, that is, whether the system is halted (runlevel 0), in singleuser mode (1), in multiuser mode (2 or 3), in X Windows (5), or rebooting (6). This command accesses the /var/run/utmp file. halt, shutdown, reboot Command set to shut the system down, usually just prior to a power down. Network ifconfig Network interface configuration and tuning utility. It is most often used at bootup to set up the interfaces, or to shut them down when rebooting.
# Code snippets from /etc/rc.d/init.d/network # ... # Check that networking is up.

Chapter 13. System and Administrative Commands

227

Advanced BashScripting Guide

[ ${NETWORKING} = "no" ] && exit 0 [ x /sbin/ifconfig ] || exit 0 # ... for i in $interfaces ; do if ifconfig $i 2>/dev/null | grep q "UP" >/dev/null 2>&1 ; then action "Shutting down interface $i: " ./ifdown $i boot fi # The GNUspecific "q" option to "grep" means "quiet", i.e., producing no output. # Redirecting output to /dev/null is therefore not strictly necessary. # ... echo "Currently active devices:" echo `/sbin/ifconfig | grep ^[az] | awk '{print $1}'` # ^^^^^ should be quoted to prevent globbing. # The following also work. # echo $(/sbin/ifconfig | awk '/^[az]/ { print $1 })' # echo $(/sbin/ifconfig | sed e 's/ .*//') # Thanks, S.C., for additional comments.

See also Example 306. route Show info about or make changes to the kernel routing table.
bash$ route Destination Gateway Genmask Flags pm367.bozosisp * 255.255.255.255 UH 127.0.0.0 * 255.0.0.0 U default pm367.bozosisp 0.0.0.0 UG

MSS Window 40 0 40 0 40 0

irtt Iface 0 ppp0 0 lo 0 ppp0

chkconfig Check network configuration. This command lists and manages the network services started at bootup in the /etc/rc?.d directory. Originally a port from IRIX to Red Hat Linux, chkconfig may not be part of the core installation of some Linux flavors.
bash$ chkconfig list atd 0:off rwhod 0:off ...

1:off 1:off

2:off 2:off

3:on 3:off

4:on 4:off

5:on 5:off

6:off 6:off

tcpdump Network packet "sniffer". This is a tool for analyzing and troubleshooting traffic on a network by dumping packet headers that match specified criteria. Dump ip packet traffic between hosts bozoville and caduceus:
bash$ tcpdump ip host bozoville and caduceus

Of course, the output of tcpdump can be parsed, using certain of the previously discussed text processing utilities. Chapter 13. System and Administrative Commands 228

Advanced BashScripting Guide Filesystem mount Mount a filesystem, usually on an external device, such as a floppy or CDROM. The file /etc/fstab provides a handy listing of available filesystems, partitions, and devices, including options, that may be automatically or manually mounted. The file /etc/mtab shows the currently mounted filesystems and partitions (including the virtual ones, such as /proc). mount a mounts all filesystems and partitions listed in /etc/fstab, except those with a noauto option. At bootup, a startup script in /etc/rc.d (rc.sysinit or something similar) invokes this to get everything mounted.
mount t iso9660 /dev/cdrom /mnt/cdrom # Mounts CDROM mount /mnt/cdrom # Shortcut, if /mnt/cdrom listed in /etc/fstab

This versatile command can even mount an ordinary file on a block device, and the file will act as if it were a filesystem. Mount accomplishes that by associating the file with a loopback device. One application of this is to mount and examine an ISO9660 image before burning it onto a CDR. [40]

Example 135. Checking a CD image

# As root... mkdir /mnt/cdtest # Prepare a mount point, if not already there.

mount r t iso9660 o loop cdimage.iso /mnt/cdtest # Mount the image. # "o loop" option equivalent to "losetup /dev/loop0" cd /mnt/cdtest # Now, check the image. ls alR # List the files in the directory tree there. # And so forth.

umount Unmount a currently mounted filesystem. Before physically removing a previously mounted floppy or CDROM disk, the device must be umounted, else filesystem corruption may result.
umount /mnt/cdrom # You may now press the eject button and safely remove the disk.

The automount utility, if properly installed, can mount and unmount floppies or CDROM disks as they are accessed or removed. On laptops with swappable floppy and CDROM drives, this can cause problems, though. sync Forces an immediate write of all updated data from buffers to hard drive (synchronize drive with buffers). While not strictly necessary, a sync assures the sys admin or user that the data just changed will survive a sudden power failure. In the olden days, a sync; sync (twice, just to make absolutely sure) was a useful precautionary measure before a system reboot. At times, you may wish to force an immediate buffer flush, as when securely deleting a file (see Example 1242) or when the lights begin to flicker. losetup Sets up and configures loopback devices. Chapter 13. System and Administrative Commands 229

Advanced BashScripting Guide Example 136. Creating a filesystem in a file

SIZE=1000000 # 1 meg # # # # Set up file of designated size. Set it up as loopback device. Create filesystem. Mount it.

head c $SIZE < /dev/zero > file losetup /dev/loop0 file mke2fs /dev/loop0 mount o loop /dev/loop0 /mnt # Thanks, S.C.

mkswap Creates a swap partition or file. The swap area must subsequently be enabled with swapon. swapon, swapoff Enable / disable swap partitition or file. These commands usually take effect at bootup and shutdown. mke2fs Create a Linux ext2 filesystem. This command must be invoked as root.

Example 137. Adding a new hard drive

#!/bin/bash # # # # Adding a second hard drive to system. Software configuration. Assumes hardware already mounted. From an article by the author of this document. in issue #38 of "Linux Gazette", http://www.linuxgazette.com. # This script must be run as root. # Nonroot exit error.

ROOT_UID=0 E_NOTROOT=67

if [ "$UID" ne "$ROOT_UID" ] then echo "Must be root to run this script." exit $E_NOTROOT fi # Use with extreme caution! # If something goes wrong, you may wipe out your current filesystem.

NEWDISK=/dev/hdb MOUNTPOINT=/mnt/newdisk

# Assumes /dev/hdb vacant. Check! # Or choose another mount point.

fdisk $NEWDISK mke2fs cv $NEWDISK1 # Check for bad blocks & verbose output. # Note: /dev/hdb1, *not* /dev/hdb! mkdir $MOUNTPOINT chmod 777 $MOUNTPOINT # Makes new drive accessible to all users.

# # # #

Now, test... mount t ext2 /dev/hdb1 /mnt/newdisk Try creating a directory. If it works, umount it, and proceed.

# Final step: # Add the following line to /etc/fstab. # /dev/hdb1 /mnt/newdisk ext2 defaults

1 1

Chapter 13. System and Administrative Commands

230

Advanced BashScripting Guide

exit 0

See also Example 136 and Example 293. tune2fs Tune ext2 filesystem. May be used to change filesystem parameters, such as maximum mount count. This must be invoked as root. This is an extremely dangerous command. Use it at your own risk, as you may inadvertently destroy your filesystem. dumpe2fs Dump (list to stdout) very verbose filesystem info. This must be invoked as root.
root# dumpe2fs /dev/hda7 | dumpe2fs 1.19, 13Jul2000 Mount count: Maximum mount count: grep 'ount count' for EXT2 FS 0.5b, 95/08/09 6 20

hdparm List or change hard disk parameters. This command must be invoked as root, and it may be dangerous if misused. fdisk Create or change a partition table on a storage device, usually a hard drive. This command must be invoked as root. Use this command with extreme caution. If something goes wrong, you may destroy an existing filesystem. fsck, e2fsck, debugfs Filesystem check, repair, and debug command set. fsck: a front end for checking a UNIX filesystem (may invoke other utilities). The actual filesystem type generally defaults to ext2. e2fsck: ext2 filesystem checker. debugfs: ext2 filesystem debugger. One of the uses of this versatile, but dangerous command is to (attempt to) recover deleted files. For advanced users only! All of these should be invoked as root, and they can damage or destroy a filesystem if misused. badblocks Checks for bad blocks (physical media flaws) on a storage device. This command finds use when formatting a newly installed hard drive or testing the integrity of backup media. [41] As an example, badblocks /dev/fd0 tests a floppy disk. The badblocks command may be invoked destructively (overwrite all data) or in nondestructive readonly mode. If root user owns the device to be tested, as is generally the case, then root must invoke this command. mkbootdisk Creates a boot floppy which can be used to bring up the system if, for example, the MBR (master boot record) becomes corrupted. The mkbootdisk command is actually a Bash script, written by Erik Troan, in the /sbin directory. Chapter 13. System and Administrative Commands 231

Advanced BashScripting Guide chroot CHange ROOT directory. Normally commands are fetched from $PATH, relative to /, the default root directory. This changes the root directory to a different one (and also changes the working directory to there). This is useful for security purposes, for instance when the system administrator wishes to restrict certain users, such as those telnetting in, to a secured portion of the filesystem (this is sometimes referred to as confining a guest user to a "chroot jail"). Note that after a chroot, the execution path for system binaries is no longer valid. A chroot /opt would cause references to /usr/bin to be translated to /opt/usr/bin. Likewise, chroot /aaa/bbb /bin/ls would redirect future instances of ls to /aaa/bbb as the base directory, rather than / as is normally the case. An alias XX 'chroot /aaa/bbb ls' in a user's ~/.bashrc effectively restricts which portion of the filesystem she may run command "XX" on. The chroot command is also handy when running from an emergency boot floppy (chroot to /dev/fd0), or as an option to lilo when recovering from a system crash. Other uses include installation from a different filesystem (an rpm option) or running a readonly filesystem from a CD ROM. Invoke only as root, and use with care. It might be necessary to copy certain system files to a chrooted directory, since the normal $PATH can no longer be relied upon. lockfile This utility is part of the procmail package (www.procmail.org). It creates a lock file, a semaphore file that controls access to a file, device, or resource. The lock file serves as a flag that this particular file, device, or resource is in use by a particular process ("busy"), and this permits only restricted access (or no access) to other processes. Lock files are used in such applications as protecting system mail folders from simultaneously being changed by multiple users, indicating that a modem port is being accessed, and showing that an instance of Netscape is using its cache. Scripts may check for the existence of a lock file created by a certain process to check if that process is running. Note that if a script attempts create a lock file that already exists, the script will likely hang. Normally, applications create and check for lock files in the /var/lock directory. A script can test for the presence of a lock file by something like the following.
appname=xyzip # Application "xyzip" created lock file "/var/lock/xyzip.lock". if [ e "/var/lock/$appname.lock ] then ...

mknod Creates block or character device files (may be necessary when installing new hardware on the system). tmpwatch Automatically deletes files which have not been accessed within a specified period of time. Usually invoked by crond to remove stale log files. MAKEDEV Utility for creating device files. It must be run as root, and in the /dev directory.
root# ./MAKEDEV

Chapter 13. System and Administrative Commands

232

Advanced BashScripting Guide This is a sort of advanced version of mknod. Backup dump, restore The dump command is an elaborate filesystem backup utility, generally used on larger installations and networks. [42] It reads raw disk partitions and writes a backup file in a binary format. Files to be backed up may be saved to a variety of storage media, including disks and tape drives. The restore command restores backups made with dump. fdformat Perform a lowlevel format on a floppy disk. System Resources ulimit Sets an upper limit on use of system resources. Usually invoked with the f option, which sets a limit on file size (ulimit f 1000 limits files to 1 meg maximum). The t option limits the coredump size (ulimit c 0 eliminates coredumps). Normally, the value of ulimit would be set in /etc/profile and/or ~/.bash_profile (see Chapter 27). Judicious use of ulimit can protect a system against the dreaded fork bomb.
#!/bin/bash while 1 do $0 & # # #+ #+ # # Endless loop. This script invokes itself . . . forks an infinite number of times . . . until the system freezes up because all resources exhausted. This is the notorious "sorcerer's appentice" scenario. Will not exit here, because this script will never terminate.

done exit 0

A ulimit Hu XX (where XX is the user process limit) in /etc/profile would abort this script when it exceeds the preset limit. umask User file creation MASK. Limit the default file attributes for a particular user. All files created by that user take on the attributes specified by umask. The (octal) value passed to umask defines the file permissions disabled. For example, umask 022 ensures that new files will have at most 755 permissions (777 NAND 022). [43] Of course, the user may later change the attributes of particular files with chmod. The usual practice is to set the value of umask in /etc/profile and/or ~/.bash_profile (see Chapter 27). rdev Get info about or make changes to root device, swap space, or video mode. The functionality of rdev has generally been taken over by lilo, but rdev remains useful for setting up a ram disk. This is another dangerous command, if misused. Modules lsmod List installed kernel modules.

Chapter 13. System and Administrative Commands

233

Advanced BashScripting Guide

bash$ lsmod Module autofs opl3 serial_cs sb uart401 sound soundlow soundcore ds i82365 pcmcia_core Size Used by 9456 2 (autoclean) 11376 0 5456 0 (unused) 34752 0 6384 0 [sb] 58368 0 [opl3 sb uart401] 464 0 [sound] 2800 6 [sb sound] 6448 2 [serial_cs] 22928 2 45984 0 [serial_cs ds i82365]

Doing a cat /proc/modules gives the same information. insmod Force installation of a kernel module (use modprobe instead, when possible). Must be invoked as root. rmmod Force unloading of a kernel module. Must be invoked as root. modprobe Module loader that is normally invoked automatically in a startup script. Must be invoked as root. depmod Creates module dependency file, usually invoked from startup script. Miscellaneous env Runs a program or script with certain environmental variables set or changed (without changing the overall system environment). The [varname=xxx] permits changing the environmental variable varname for the duration of the script. With no options specified, this command lists all the environmental variable settings. In Bash and other Bourne shell derivatives, it is possible to set variables in a single command's environment.
var1=value1 var2=value2 commandXXX # $var1 and $var2 set in the environment of 'commandXXX' only.

The first line of a script (the "shabang" line) may use env when the path to the shell or interpreter is unknown.
#! /usr/bin/env perl print "This Perl script will run,\n"; print "even when I don't know where to find Perl.\n"; # Good for portable crossplatform scripts, # where the Perl binaries may not be in the expected place. # Thanks, S.C.

ldd Show shared lib dependencies for an executable file. Chapter 13. System and Administrative Commands 234

Advanced BashScripting Guide

bash$ ldd /bin/ls libc.so.6 => /lib/libc.so.6 (0x4000c000) /lib/ldlinux.so.2 => /lib/ldlinux.so.2 (0x80000000)

watch Run a command repeatedly, at specified time intervals. The default is twosecond intervals, but this may be changed with the n option.
watch n 5 tail /var/log/messages # Shows tail end of system log, /var/log/messages, every five seconds.

strip Remove the debugging symbolic references from an executable binary. This decreases its size, but makes debugging it impossible. This command often occurs in a Makefile, but rarely in a shell script. nm List symbols in an unstripped compiled binary. rdist Remote distribution client: synchronizes, clones, or backs up a file system on a remote server. Using our knowledge of administrative commands, let us examine a system script. One of the shortest and simplest to understand scripts is killall, used to suspend running processes at system shutdown.

Example 138. killall, from /etc/rc.d/init.d

#!/bin/sh # > Comments added by the author of this document marked by "# >". # > This is part of the 'rc' script package # > by Miquel van Smoorenburg, <[email protected]> # > This particular script seems to be Red Hat specific # > (may not be present in other distributions). # Bring down all unneeded services that are still running (there shouldn't # be any, so this is just a sanity check) for i in /var/lock/subsys/*; do # > Standard for/in loop, but since "do" is on same line, # > it is necessary to add ";". # Check if the script is there. [ ! f $i ] && continue # > This is a clever use of an "and list", equivalent to: # > if [ ! f "$i" ]; then continue # Get the subsystem name. subsys=${i#/var/lock/subsys/} # > Match variable name, which, in this case, is the file name. # > This is the exact equivalent of subsys=`basename $i`. # > It gets it from the lock file name (if there is a lock file, # >+ that's proof the process has been running). # > See the "lockfile" entry, above.

Chapter 13. System and Administrative Commands

235

Advanced BashScripting Guide

# Bring the subsystem down. if [ f /etc/rc.d/init.d/$subsys.init ]; then /etc/rc.d/init.d/$subsys.init stop else /etc/rc.d/init.d/$subsys stop # > Suspend running jobs and daemons # > using the 'stop' shell builtin. fi done

That wasn't so bad. Aside from a little fancy footwork with variable matching, there is no new material there. Exercise 1. In /etc/rc.d/init.d, analyze the halt script. It is a bit longer than killall, but similar in concept. Make a copy of this script somewhere in your home directory and experiment with it (do not run it as root). Do a simulated run with the vn flags (sh vn scriptname). Add extensive comments. Change the "action" commands to "echos". Exercise 2. Look at some of the more complex scripts in /etc/rc.d/init.d. See if you can understand parts of them. Follow the above procedure to analyze them. For some additional insight, you might also examine the file sysvinitfiles in /usr/share/doc/initscripts?.??, which is part of the "initscripts" documentation.

Chapter 13. System and Administrative Commands

236

Chapter 14. Command Substitution

Command substitution reassigns the output of a command [44] or even multiple commands; it literally plugs the command output into another context. The classic form of command substitution uses backquotes (`...`). Commands within backquotes (backticks) generate command line text.
script_name=`basename $0` echo "The name of this script is $script_name."

The output of commands can be used as arguments to another command, to set a variable, and even for generating the argument list in a for loop.
rm `cat filename` # "filename" contains a list of files to delete. # # S. C. points out that "arg list too long" error might result. # Better is xargs rm < filename # ( covers those cases where "filename" begins with a "" ) textfile_listing=`ls *.txt` # Variable contains names of all *.txt files in current working directory. echo $textfile_listing textfile_listing2=$(ls *.txt) echo $textfile_listing2 # Same result. # # # # # # # # # The alternative form of command substitution.

A possible problem with putting a list of files into a single string is that a newline may creep in. A safer way to assign a list of files to a parameter is with an array. shopt s nullglob # If no match, filename expands to nothing. textfile_listing=( *.txt ) Thanks, S.C.

Command substitution may result in word splitting.

COMMAND `echo a b` COMMAND "`echo a b`" COMMAND `echo` COMMAND "`echo`" # 2 args: a and b # 1 arg: "a b" # no arg # one empty arg

# Thanks, S.C.

Even when there is no word splitting, command substitution can remove trailing newlines.
# cd "`pwd`" # However... # This should always work.

mkdir 'dir with trailing newline

Chapter 14. Command Substitution

237

Advanced BashScripting Guide

' cd 'dir with trailing newline ' cd "`pwd`" # Error message: # bash: cd: /tmp/file with trailing newline: No such file or directory cd "$PWD" # Works fine.

old_tty_setting=$(stty g) echo "Hit a key " stty icanon echo

# Save old terminal setting.

# Disable "canonical" mode for terminal. # Also, disable *local* echo. key=$(dd bs=1 count=1 2> /dev/null) # Using 'dd' to get a keypress. stty "$old_tty_setting" # Restore old setting. echo "You hit ${#key} key." # ${#variable} = number of characters in $variable # # Hit any key except RETURN, and the output is "You hit 1 key." # Hit RETURN, and it's "You hit 0 key." # The newline gets eaten in the command substitution. Thanks, S.C.

Using echo to output an unquoted variable set with command substitution removes trailing newlines characters from the output of the reassigned command(s). This can cause unpleasant surprises.
dir_listing=`ls l` echo $dir_listing

# unquoted

# Expecting a nicely ordered directory listing. # However, what you get is: # total 3 rwrwr 1 bozo bozo 30 May 13 17:15 1.txt rwrwr 1 bozo # bozo 51 May 15 20:57 t2.sh rwxrxrx 1 bozo bozo 217 Mar 5 21:13 wi.sh # The newlines disappeared.

echo "$dir_listing" # quoted # rwrwr 1 bozo 30 May 13 17:15 1.txt # rwrwr 1 bozo 51 May 15 20:57 t2.sh # rwxrxrx 1 bozo 217 Mar 5 21:13 wi.sh

Command substitution even permits setting a variable to the contents of a file, using either redirection or the cat command.
variable1=`<file1` variable2=`cat file2` # # # # Note 1: Removes newlines. Note 2: # Set "variable1" to contents of "file1". # Set "variable2" to contents of "file2".

Chapter 14. Command Substitution

238

Advanced BashScripting Guide

# The variables may contain embedded whitespace, #+ or even (horrors), control characters. # Excerpts from system file, /etc/rc.d/rc.sysinit #+ (on a Red Hat Linux installation)

if [ f /fsckoptions ]; then fsckoptions=`cat /fsckoptions` ... fi # # if [ e "/proc/ide/${disk[$device]}/media" ] ; then hdmedia=`cat /proc/ide/${disk[$device]}/media` ... fi # # if [ ! n "`uname r | grep ""`" ]; then ktag="`cat /proc/version`" ... fi # # if [ $usb = "1" ]; then sleep 5 mouseoutput=`cat /proc/bus/usb/devices 2>/dev/null|grep E "^I.*Cls=03.*Prot=02"` kbdoutput=`cat /proc/bus/usb/devices 2>/dev/null|grep E "^I.*Cls=03.*Prot=01"` ... fi

Do not set a variable to the contents of a long text file unless you have a very good reason for doing so. Do not set a variable to the contents of a binary file, even as a joke.

Example 141. Stupid script tricks

#!/bin/bash # stupidscripttricks.sh: Don't try this at home, folks. # From "Stupid Script Tricks," Volume I.

dangerous_variable=`cat /boot/vmlinuz`

# The compressed Linux kernel itself.

echo "stringlength of \$dangerous_variable = ${#dangerous_variable}" # stringlength of $dangerous_variable = 794151 # (Does not give same count as 'wc c /boot/vmlinuz'.) # echo "$dangerous_variable" # Don't try this! It would hang the script.

# The document author is aware of no useful applications for #+ setting a variable to the contents of a binary file. exit 0

Chapter 14. Command Substitution

239

Advanced BashScripting Guide Notice that a buffer overrun does not occur. This is one instance where an interpreted language, such as Bash, provides more protection from programmer mistakes than a compiled language. Command substitution permits setting a variable to the output of a loop. The key to this is grabbing the output of an echo command within the loop.

Example 142. Generating a variable from a loop

#!/bin/bash # csubloop.sh: Setting a variable to the output of a loop. variable1=`for i in 1 2 3 4 5 do echo n "$i" done` echo "variable1 = $variable1"

# The 'echo' command is critical #+ to command substitution. # variable1 = 12345

i=0 variable2=`while [ "$i" lt 10 ] do echo n "$i" # Again, the necessary 'echo'. let "i += 1" # Increment. done` echo "variable2 = $variable2" exit 0 # variable2 = 0123456789

Command substitution makes it possible to extend the toolset available to Bash. It is simply a matter of writing a program or script that outputs to stdout (like a wellbehaved UNIX tool should) and assigning that output to a variable.
#include <stdio.h> /* "Hello, world." C program */

int main() { printf( "Hello, world." ); return (0); } bash$ gcc o hello hello.c

#!/bin/bash # hello.sh greeting=`./hello` echo $greeting

Chapter 14. Command Substitution

240

Advanced BashScripting Guide

bash$ sh hello.sh Hello, world.

The $(COMMAND) form has superseded backticks for command substitution.

output=$(sed n /"$1"/p $file) # From "grp.sh" example.

# Setting a variable to the contents of a text file. File_contents1=$(cat $file1) File_contents2=$(<$file2) # Bash permits this also.

Examples of command substitution in shell scripts: 1. Example 107 2. Example 1026 3. Example 926 4. Example 122 5. Example 1215 6. Example 1212 7. Example 1239 8. Example 1013 9. Example 1010 10. Example 1224 11. Example 167 12. Example A18 13. Example 281 14. Example 1232 15. Example 1233 16. Example 1234

Chapter 14. Command Substitution

241

Chapter 15. Arithmetic Expansion

Arithmetic expansion provides a powerful tool for performing arithmetic operations in scripts. Translating a string into a numerical expression is relatively straightforward using backticks, double parentheses, or let. Variations Arithmetic expansion with backticks (often used in conjunction with expr)
z=`expr $z + 3` # The 'expr' command performs the expansion.

Arithmetic expansion with double parentheses, and using let The use of backticks in arithmetic expansion has been superseded by double parentheses $((...)) or the very convenient let construction.
z=$(($z+3)) # $((EXPRESSION)) is arithmetic expansion.

# Not to be confused with #+ command substitution.

let z=z+3 let "z += 3" # Quotes permit the use of spaces and special operators. # The 'let' operator actually performs arithmetic evaluation, #+ rather than expansion.

All the above are equivalent. You may use whichever one "rings your chimes". Examples of arithmetic expansion in scripts: 1. Example 126 2. Example 1014 3. Example 261 4. Example 266 5. Example A18

Chapter 15. Arithmetic Expansion

242

Chapter 16. I/O Redirection

There are always three default "files" open, stdin (the keyboard), stdout (the screen), and stderr (error messages output to the screen). These, and any other open files, can be redirected. Redirection simply means capturing output from a file, command, program, script, or even code block within a script (see Example 31 and Example 32) and sending it as input to another file, command, program, or script. Each open file gets assigned a file descriptor. [45] The file descriptors for stdin, stdout, and stderr are 0, 1, and 2, respectively. For opening additional files, there remain descriptors 3 to 9. It is sometimes useful to assign one of these additional file descriptors to stdin, stdout, or stderr as a temporary duplicate link. [46] This simplifies restoration to normal after complex redirection and reshuffling (see Example 161).

COMMAND_OUTPUT > # Redirect stdout to a file. # Creates the file if not present, otherwise overwrites it. ls lR > dirtree.list # Creates a file containing a listing of the directory tree. : > filename # The > truncates file "filename" to zero length. # If file not present, creates zerolength file (same effect as 'touch'). # The : serves as a dummy placeholder, producing no output. > filename # The > truncates file "filename" to zero length. # If file not present, creates zerolength file (same effect as 'touch'). # (Same result as ": >", above, but this does not work with some shells.) COMMAND_OUTPUT >> # Redirect stdout to a file. # Creates the file if not present, otherwise appends to it.

# Singleline redirection commands (affect only the line they are on): # 1>filename # Redirect 1>>filename # Redirect 2>filename # Redirect 2>>filename # Redirect &>filename # Redirect

stdout to file "filename". and append stdout to file "filename". stderr to file "filename". and append stderr to file "filename". both stdout and stderr to file "filename".

#============================================================================== # Redirecting stdout, one line at a time. LOGFILE=script.log echo echo echo echo "This "This "This "This statement statement statement statement is is is is sent to the log file, \"$LOGFILE\"." 1>$LOGFILE appended to \"$LOGFILE\"." 1>>$LOGFILE also appended to \"$LOGFILE\"." 1>>$LOGFILE echoed to stdout, and will not appear in \"$LOGFILE\"."

Chapter 16. I/O Redirection

243

Advanced BashScripting Guide

# These redirection commands automatically "reset" after each line.

# Redirecting stderr, one line at a time. ERRORFILE=script.errors bad_command1 2>$ERRORFILE bad_command2 2>>$ERRORFILE bad_command3 # Error message sent to $ERRORFILE. # Error message appended to $ERRORFILE. # Error message echoed to stderr, #+ and does not appear in $ERRORFILE. # These redirection commands also automatically "reset" after each line. #==============================================================================

2>&1 # Redirects stderr to stdout. # Error messages get sent to same place as standard output. i>&j # Redirects file descriptor i to j. # All output of file pointed to by i gets sent to file pointed to by j. >&j # Redirects, by default, file descriptor 1 (stdout) to j. # All stdout gets sent to file pointed to by j. 0< FILENAME < FILENAME # Accept input from a file. # Companion command to ">", and often used in combination with it. # # grep searchword <filename

[j]<>filename # Open file "filename" for reading and writing, and assign file descriptor "j" to it. # If "filename" does not exist, create it. # If file descriptor "j" is not specified, default to fd 0, stdin. # # An application of this is writing at a specified place in a file. echo 1234567890 > File # Write string to "File". exec 3<> File # Open "File" and assign fd 3 to it. read n 4 <&3 # Read only 4 characters. echo n . >&3 # Write a decimal point there. exec 3>& # Close fd 3. cat File # ==> 1234.67890 # Random access, by golly.

| # Pipe. # General purpose process and command chaining tool. # Similar to ">", but more general in effect. # Useful for chaining commands, scripts, files, and programs together. cat *.txt | sort | uniq > resultfile # Sorts the output of all the .txt files and deletes duplicate lines, # finally saves results to "resultfile".

Chapter 16. I/O Redirection

244

Advanced BashScripting Guide Multiple instances of input and output redirection and/or pipes can be combined in a single command line.
command < inputfile > outputfile command1 | command2 | command3 > outputfile

See Example 1223 and Example A16. Multiple output streams may be redirected to one file.
ls yz >> command.log 2>&1 # Capture result of illegal options "yz" to "ls" in file "command.log". # Because stderr redirected to the file, any error messages will also be there.

Closing File Descriptors n<& Close input file descriptor n. 0<&, <& Close stdin. n>& Close output file descriptor n. 1>&, >& Close stdout. Child processes inherit open file descriptors. This is why pipes work. To prevent an fd from being inherited, close it.
# Redirecting only stderr to a pipe. exec 3>&1 ls l 2>&1 >&3 3>& | grep bad 3>& # ^^^^ ^^^^ exec 3>& # Thanks, S.C. # Save current "value" of stdout. # Close fd 3 for 'grep' (but not 'ls'). # Now close it for the remainder of the script.

For a more detailed introduction to I/O redirection see Appendix E.

16.1. Using exec

An exec <filename command redirects stdin to a file. From that point on, all stdin comes from that file, rather than its normal source (usually keyboard input). This provides a method of reading a file line by line and possibly parsing each line of input using sed and/or awk.

Example 161. Redirecting stdin using exec

#!/bin/bash # Redirecting stdin using 'exec'.

exec 6<&0

# Link file descriptor #6 with stdin.

Chapter 16. I/O Redirection

245

Advanced BashScripting Guide

# Saves stdin. exec < datafile read a1 read a2 echo echo echo echo echo # stdin replaced by file "datafile" # Reads first line of file "datafile". # Reads second line of file "datafile."

"Following lines read from file." "" $a1 $a2

echo; echo; echo exec 0<&6 6<& # Now restore stdin from fd #6, where it had been saved, #+ and close fd #6 ( 6<& ) to free it for other processes to use. # # <&6 6<& also works. echo read echo echo echo echo exit 0 n "Enter data " b1 # Now "read" functions as expected, reading from normal stdin. "Input read from stdin." "" "b1 = $b1"

Similarly, an exec >filename command redirects stdout to a designated file. This sends all command output that would normally go to stdout to that file.

Example 162. Redirecting stdout using exec

#!/bin/bash # reassignstdout.sh LOGFILE=logfile.txt exec 6>&1 # Link file descriptor #6 with stdout. # Saves stdout. # stdout replaced with file "logfile.txt".

exec > $LOGFILE

# # # All output from commands in this block sent to file $LOGFILE. echo n "Logfile: " date echo "" echo echo "Output of \"ls al\" command" echo ls al echo; echo echo "Output of \"df\" command"

Chapter 16. I/O Redirection

246

Advanced BashScripting Guide

echo df # # exec 1>&6 6>& # Restore stdout and close file descriptor #6.

echo echo "== stdout now restored to default == " echo ls al echo exit 0

Example 163. Redirecting both stdin and stdout in the same script with exec
#!/bin/bash # upperconv.sh # Converts a specified input file to uppercase. E_FILE_ACCESS=70 E_WRONG_ARGS=71 if [ ! then echo echo exit fi r "$1" ] # Is specified input file readable?

"Can't read from input file!" "Usage: $0 inputfile outputfile" $E_FILE_ACCESS # Will exit with same error #+ even if input file ($1) not specified.

if [ z "$2" ] then echo "Need to specify output file." echo "Usage: $0 inputfile outputfile" exit $E_WRONG_ARGS fi

exec 4<&0 exec < $1 exec 7>&1 exec > $2

# Will read from input file.

# Will write to output file. # Assumes output file writable (add check?).

# cat | tr az AZ # Uppercase conversion. # ^^^^^ # Reads from stdin. # ^^^^^^^^^^ # Writes to stdout. # However, both stdin and stdout were redirected. # exec 1>&7 7>& exec 0<&4 4<& # Restore stout. # Restore stdin.

# After restoration, the following line prints to stdout as expected. echo "File \"$1\" written to \"$2\" as uppercase conversion."

Chapter 16. I/O Redirection

247

Advanced BashScripting Guide

exit 0

16.2. Redirecting Code Blocks

Blocks of code, such as while, until, and for loops, even if/then test blocks can also incorporate redirection of stdin. Even a function may use this form of redirection (see Example 237). The < operator at the end of the code block accomplishes this.

Example 164. Redirected while loop

#!/bin/bash if [ z "$1" ] then Filename=names.data # Default, if no filename specified. else Filename=$1 fi #+ Filename=${1:names.data} # can replace the above test (parameter substitution). count=0 echo while [ "$name" != Smith ] do read name echo $name let "count += 1" done <"$Filename" # ^^^^^^^^^^^^ # Why is variable $name in quotes? # Reads from $Filename, rather than stdin.

# Redirects stdin to file $Filename.

echo; echo "$count names read"; echo # Note that in some older shell scripting languages, #+ the redirected loop would run as a subshell. # Therefore, $count would return 0, the initialized value outside the loop. # Bash and ksh avoid starting a subshell whenever possible, # +so that this script, for example, runs correctly. # # Thanks to Heiner Steven for pointing this out. exit 0

Example 165. Alternate form of redirected while loop

#!/bin/bash # This is an alternate form of the preceding script. # Suggested by Heiner Steven #+ as a workaround in those situations when a redirect loop #+ runs as a subshell, and therefore variables inside the loop # +do not keep their values upon loop termination.

Chapter 16. I/O Redirection

248

Advanced BashScripting Guide

if [ z "$1" ] then Filename=names.data else Filename=$1 fi

# Default, if no filename specified.

exec 3<&0 exec 0<"$Filename" count=0 echo

# Save stdin to file descriptor 3. # Redirect standard input.

while [ "$name" != Smith ] do read name # Reads from redirected stdin ($Filename). echo $name let "count += 1" done <"$Filename" # Loop reads from file $Filename. # ^^^^^^^^^^^^

exec 0<&3 exec 3<&

# Restore old stdin. # Close temporary fd 3.

echo; echo "$count names read"; echo exit 0

Example 166. Redirected until loop

#!/bin/bash # Same as previous example, but with "until" loop. if [ z "$1" ] then Filename=names.data else Filename=$1 fi # while [ "$name" != Smith ] until [ "$name" = Smith ] do read name echo $name done <"$Filename" # ^^^^^^^^^^^^

# Default, if no filename specified.

# Change

!=

to =.

# Reads from $Filename, rather than stdin. # Redirects stdin to file $Filename.

# Same results as with "while" loop in previous example. exit 0

Example 167. Redirected for loop

Chapter 16. I/O Redirection

249

Advanced BashScripting Guide

#!/bin/bash if [ z "$1" ] then Filename=names.data else Filename=$1 fi

# Default, if no filename specified.

line_count=`wc $Filename | awk '{ print $1 }'` # Number of lines in target file. # # Very contrived and kludgy, nevertheless shows that #+ it's possible to redirect stdin within a "for" loop... #+ if you're clever enough. # # More concise is line_count=$(wc < "$Filename")

for name in `seq $line_count` # while [ "$name" != Smith ] do read name echo $name if [ "$name" = Smith ] then break fi done <"$Filename" # ^^^^^^^^^^^^ exit 0

# Recall that "seq" prints sequence of numbers. more complicated than a "while" loop # Reads from $Filename, rather than stdin. # Need all this extra baggage here.

# Redirects stdin to file $Filename.

We can modify the previous example to also redirect the output of the loop.

Example 168. Redirected for loop (both stdin and stdout redirected)
#!/bin/bash if [ z "$1" ] then Filename=names.data else Filename=$1 fi Savefile=$Filename.new FinalName=Jonah

# Default, if no filename specified.

# Filename to save results in. # Name to terminate "read" on. # Number of lines in target file.

line_count=`wc $Filename | awk '{ print $1 }'`

for name in `seq $line_count` do read name echo "$name" if [ "$name" = "$FinalName" ] then break

Chapter 16. I/O Redirection

250

Advanced BashScripting Guide

fi done < "$Filename" > "$Savefile" # ^^^^^^^^^^^^^^^^^^^^^^^^^^^ exit 0 # Redirects stdin to file $Filename, and saves it to backup file.

Example 169. Redirected if/then test

#!/bin/bash if [ z "$1" ] then Filename=names.data else Filename=$1 fi TRUE=1 if [ "$TRUE" ] then read name echo $name fi <"$Filename" # ^^^^^^^^^^^^ # if true and if : also work.

# Default, if no filename specified.

# Reads only first line of file. # An "if/then" test has no way of iterating unless embedded in a loop. exit 0

Example 1610. Data file "names.data" for above examples

Aristotle Belisarius Capablanca Euler Goethe Hamurabi Jonah Laplace Maroczy Purcell Schmidt Semmelweiss Smith Turing Venn Wilson ZnoskoBorowski # This is a data file for #+ "redir2.sh", "redir3.sh", "redir4.sh", "redir4a.sh", "redir5.sh".

Redirecting the stdout of a code block has the effect of saving its output to a file. See Example 32. Here documents are a special case of redirected code blocks. Chapter 16. I/O Redirection 251

Advanced BashScripting Guide

16.3. Applications
Clever use of I/O redirection permits parsing and stitching together snippets of command output (see Example 116). This permits generating report and log files.

Example 1611. Logging events

#!/bin/bash # logevents.sh, by Stephane Chazelas. # Event logging to a file. # Must be run as root (for write access in /var/log). ROOT_UID=0 E_NOTROOT=67 # Only users with $UID 0 have root privileges. # Nonroot exit error.

if [ "$UID" ne "$ROOT_UID" ] then echo "Must be root to run this script." exit $E_NOTROOT fi

FD_DEBUG1=3 FD_DEBUG2=4 FD_DEBUG3=5 # Uncomment one of the two lines below to activate script. # LOG_EVENTS=1 # LOG_VARS=1

log() # Writes time and date to log file. { echo "$(date) $*" >&7 # This *appends* the date to the file. # See below. }

case $LOG_LEVEL in 1) exec 3>&2 2) exec 3>&2 3) exec 3>&2 *) exec 3> /dev/null esac

4> /dev/null 4>&2 4>&2 4> /dev/null

5> /dev/null;; 5> /dev/null;; 5>&2;; 5> /dev/null;;

FD_LOGVARS=6 if [[ $LOG_VARS ]] then exec 6>> /var/log/vars.log else exec 6> /dev/null fi FD_LOGEVENTS=7 if [[ $LOG_EVENTS ]] then

# Bury output.

Chapter 16. I/O Redirection

252

Advanced BashScripting Guide

# then exec 7 >(exec gawk '{print strftime(), $0}' >> /var/log/event.log) # Above line will not work in Bash, version 2.04. exec 7>> /var/log/event.log # Append to "event.log". log # Write time and date. else exec 7> /dev/null # Bury output. fi echo "DEBUG3: beginning" >&${FD_DEBUG3} ls l >&5 2>&4 echo "Done" echo "sending mail" >&${FD_LOGEVENTS} # command1 >&5 2>&4 # command2 # Writes "sending mail" to fd #7.

exit 0

Chapter 16. I/O Redirection

253

Chapter 17. Here Documents

A here document uses a special form of I/O redirection to feed a command list to an interactive program or command, such as ftp, telnet, or ex. A "limit string" delineates (frames) the command list. The special symbol << designates the limit string. This has the effect of redirecting the output of a file into the stdin of the program or command. It is similar to interactiveprogram < commandfile, where commandfile contains
command #1 command #2 ...

The "here document" alternative looks like this:

#!/bin/bash interactiveprogram <<LimitString command #1 command #2 ... LimitString

Choose a limit string sufficiently unusual that it will not occur anywhere in the command list and confuse matters. Note that here documents may sometimes be used to good effect with noninteractive utilities and commands.

Example 171. dummyfile: Creates a 2line dummy file

#!/bin/bash # Noninteractive use of 'vi' to edit a file. # Emulates 'sed'. E_BADARGS=65 if [ z "$1" ] then echo "Usage: `basename $0` filename" exit $E_BADARGS fi TARGETFILE=$1 # Insert 2 lines in file, then save. #Begin here document# vi $TARGETFILE <<x23LimitStringx23 i This is line 1 of the example file. This is line 2 of the example file. ^[ ZZ x23LimitStringx23 #End here document#

Chapter 17. Here Documents

254

Advanced BashScripting Guide

# Note that ^[ above is a literal escape #+ typed by ControlV <Esc>. # Bram Moolenaar points out that this may not work with 'vim', #+ because of possible problems with terminal interaction. exit 0

The above script could just as effectively have been implemented with ex, rather than vi. Here documents containing a list of ex commands are common enough to form their own category, known as ex scripts.

Example 172. broadcast: Sends message to everyone logged in

#!/bin/bash wall <<zzz23EndOfMessagezzz23 Email your noontime orders for pizza to the system administrator. (Add an extra dollar for anchovy or mushroom topping.) # Additional message text goes here. # Note: Comment lines printed by 'wall'. zzz23EndOfMessagezzz23 # Could have been done more efficiently by # wall <messagefile # However, saving a message template in a script saves work. exit 0

Example 173. Multiline message using cat

#!/bin/bash # 'echo' is fine for printing single line messages, # but somewhat problematic for for message blocks. # A 'cat' here document overcomes this limitation. cat <<Endofmessage This is line 1 of the message. This is line 2 of the message. This is line 3 of the message. This is line 4 of the message. This is the last line of the message. Endofmessage exit 0

# # Code below disabled, due to "exit 0" above. # S.C. points out that the following also works. echo " This is line 1 of the message. This is line 2 of the message. This is line 3 of the message.

Chapter 17. Here Documents

255

Advanced BashScripting Guide

This is line 4 of the message. This is the last line of the message. " # However, text may not include double quotes unless they are escaped.

The option to mark a here document limit string (<<LimitString) suppresses tabs (but not spaces) in the output. This may be useful in making a script more readable.

Example 174. Multiline message, with tabs suppressed

#!/bin/bash # Same as previous example, but... # # The option to a here document << suppresses tabs in the body of the document, but *not* spaces.

cat <<ENDOFMESSAGE This is line 1 of the message. This is line 2 of the message. This is line 3 of the message. This is line 4 of the message. This is the last line of the message. ENDOFMESSAGE # The output of the script will be flush left. # Leading tab in each line will not show. # Above 5 lines of "message" prefaced by a tab, not spaces. # Spaces not affected by << .

exit 0

A here document supports parameter and command substitution. It is therefore possible to pass different parameters to the body of the here document, changing its output accordingly.

Example 175. Here document with parameter substitution

#!/bin/bash # Another 'cat' here document, using parameter substitution. # Try it with no command line parameters, ./scriptname # Try it with one command line parameter, ./scriptname Mortimer # Try it with one twoword quoted command line parameter, # ./scriptname "Mortimer Jones" CMDLINEPARAM=1 # Expect at least command line parameter.

if [ $# ge $CMDLINEPARAM ] then NAME=$1 # If more than one command line param, # then just take the first. else NAME="John Doe" # Default, if no command line parameter. fi RESPONDENT="the author of this fine script"

Chapter 17. Here Documents

256

Advanced BashScripting Guide

cat <<Endofmessage Hello, there, $NAME. Greetings to you, $NAME, from $RESPONDENT. # This comment shows up in the output (why?). Endofmessage # Note that the blank lines show up in the output. # So does the "comment". exit 0

This is a useful script containing a here document with parameter substitution.

Example 176. Upload a file pair to "Sunsite" incoming directory

#!/bin/bash # upload.sh # Upload file pair (Filename.lsm, Filename.tar.gz) # to incoming directory at Sunsite (ibiblio.org). E_ARGERROR=65 if [ z "$1" ] then echo "Usage: `basename $0` filename" exit $E_ARGERROR fi

Filename=`basename $1`

# Strips pathname out of file name.

Server="ibiblio.org" Directory="/incoming/Linux" # These need not be hardcoded into script, # but may instead be changed to command line argument. Password="your.email.address" ftp n $Server <<EndOfSession # n option disables autologon user anonymous "$Password" binary bell # Ring 'bell' after each file transfer cd $Directory put "$Filename.lsm" put "$Filename.tar.gz" bye EndOfSession exit 0 # Change above to suit.

Chapter 17. Here Documents

257

Advanced BashScripting Guide Quoting or escaping the "limit string" at the head of a here document disables parameter substitution within its body.

Example 177. Parameter substitution turned off

#!/bin/bash # A 'cat' here document, but with parameter substitution disabled. NAME="John Doe" RESPONDENT="the author of this fine script" cat <<'Endofmessage' Hello, there, $NAME. Greetings to you, $NAME, from $RESPONDENT. Endofmessage # # # # No parameter substitution when the "limit string" is quoted or escaped. Either of the following at the head of the here document would have the same effect. cat <<"Endofmessage" cat <<\Endofmessage

exit 0

Disabling parameter substitution permits outputting literal text. Generating scripts or even program code is one use for this.

Example 178. A script that generates another script

#!/bin/bash # generatescript.sh # Based on an idea by Albert Reiner. OUTFILE=generated.sh # Name of the file to generate.

# # 'Here document containing the body of the generated script. ( cat <<'EOF' #!/bin/bash echo "This is a generated shell script." # Note that since we are inside a subshell, #+ we can't access variables in the "outside" script. # Just to prove it . . . echo "Generated file will be named: $OUTFILE" # Won't work. a=7 b=3 let "c = $a * $b" echo "c = $c" exit 0 EOF

Chapter 17. Here Documents

258

Advanced BashScripting Guide

) > $OUTFILE # # Quoting the 'limit string' prevents variable expansion #+ within the body of the above 'here document.' # This permits outputting literal strings in the output file. if [ f "$OUTFILE" ] then chmod 755 $OUTFILE # Make the generated file executable. else echo "Problem in creating file: \"$OUTFILE\"" fi # This method can also be used for generating #+ C programs, Perl programs, Python programs, Makefiles, #+ and the like. exit 0

A here document can supply input to a function in the same script.

Example 179. Here documents and functions

#!/bin/bash # herefunction.sh GetPersonalData () { read firstname read lastname read address read city read state read zipcode } # This certainly looks like an interactive function, but...

# Supply input to the above function. GetPersonalData <<RECORD001 Bozo Bozeman 2726 Nondescript Dr. Baltimore MD 21226 RECORD001

echo echo "$firstname $lastname" echo "$address" echo "$city, $state $zipcode" echo exit 0

Chapter 17. Here Documents

259

Advanced BashScripting Guide It is possible to use : as a dummy command accepting output from a here document. This, in effect, creates an "anonymous" here document.

Example 1710. "Anonymous" Here Document

#!/bin/bash : <<TESTVARIABLES ${HOSTNAME?}${USER?}${MAIL?} TESTVARIABLES exit 0

# Print error message if one of the variables not set.

A variation of the above technique permits "commenting out" blocks of code.

Example 1711. Commenting out a block of code

#!/bin/bash # commentblock.sh : << echo This This COMMENTBLOCK "This line will not echo." is a comment line missing the "#" prefix. is another comment line missing the "#" prefix.

&*@!!++= The above line will cause no error message, because the Bash interpreter will ignore it. COMMENTBLOCK echo "Exit value of above \"COMMENTBLOCK\" is $?." # No error shown. # 0

# #+ # #+

The above technique also comes in useful for commenting out a block of working code for debugging purposes. This saves having to put a "#" at the beginning of each line, then having to go back and delete each "#" later.

: << DEBUGXXX for file in * do cat "$file" done DEBUGXXX exit 0

Yet another twist of this nifty trick makes "selfdocumenting" scripts possible.

Example 1712. A selfdocumenting script

Chapter 17. Here Documents

260

Advanced BashScripting Guide

#!/bin/bash # selfdocument.sh: selfdocumenting script # Modification of "colm.sh". DOC_REQUEST=70 if [ "$1" = "h" o "$1" = "help" ] # Request help. then echo; echo "Usage: $0 [directoryname]"; echo sed silent e '/DOCUMENTATIONXX$/,/^DOCUMENTATION/p' "$0" | sed e '/DOCUMENTATIONXX/d'; exit $DOC_REQUEST; fi : << DOCUMENTATIONXX List the statistics of a specified directory in tabular format. The command line parameter gives the directory to be listed. If no directory specified or directory specified cannot be read, then list the current working directory. DOCUMENTATIONXX if [ z "$1" o ! r "$1" ] then directory=. else directory="$1" fi echo "Listing of "$directory":"; echo (printf "PERMISSIONS LINKS OWNER GROUP SIZE MONTH DAY HH:MM PROGNAME\n" \ ; ls l "$directory" | sed 1d) | column t exit 0

Here documents create temporary files, but these files are deleted after opening and are not accessible to any other process.
bash$ bash c 'lsof a p $$ d0' << EOF > EOF lsof 1213 bozo 0r REG 3,5 0 30386 /tmp/t12130sh (deleted)

Some utilities will not work inside a here document.

The closing limit string, on the final line of a here document, must start in the first character position. There can be no leading whitespace.
#!/bin/bash echo "" cat <<LimitString echo "This is line 1 of the message inside the here document." echo "This is line 2 of the message inside the here document." echo "This is the final line of the message inside the here document." LimitString #^^^^Indented limit string. Error! This script will not behave as expected.

Chapter 17. Here Documents

261

Advanced BashScripting Guide

echo "" # These comments are outside the 'here document', #+ and should not echo. echo "Outside the here document." exit 0 echo "This line had better not echo." # Follows an 'exit' command.

For those tasks too complex for a "here document", consider using the expect scripting language, which is specifically tailored for feeding input into interactive programs.

Chapter 17. Here Documents

262

Chapter 18. Recess Time

This bizarre little intermission gives the reader a chance to relax and maybe laugh a bit. Fellow Linux user, greetings! You are reading something which will bring you luck and good fortune. Just email a copy of this document to 10 of your friends. Before you make the copies, send a 100line Bash script to the first person on the list given at the bottom of this letter. Then delete their name and add yours to the bottom of the list. Don't break the chain! Make the copies within 48 hours. Wilfred P. of Brooklyn failed to send out his ten copies and woke the next morning to find his job description changed to "COBOL programmer." Howard L. of Newport News sent out his ten copies and within a month had enough hardware to build a 100node Beowulf cluster dedicated to playing xbill. Amelia V. of Chicago laughed at this letter and broke the chain. Shortly thereafter, a fire broke out in her terminal and she now spends her days writing documentation for MS Windows. Don't break the chain! Send out your ten copies today!

Courtesy 'NIX "fortune cookies", with some alterations and many apologies

Chapter 18. Recess Time

263

Part 4. Advanced Topics

At this point, we are ready to delve into certain of the difficult and unusual aspects of scripting. Along the way, we will attempt to "push the envelope" in various ways and examine boundary conditions (what happens when we move into uncharted territory?). Table of Contents 19. Regular Expressions 19.1. A Brief Introduction to Regular Expressions 19.2. Globbing 20. Subshells 21. Restricted Shells 22. Process Substitution 23. Functions 23.1. Complex Functions and Function Complexities 23.2. Local Variables 24. Aliases 25. List Constructs 26. Arrays 27. Files 28. /dev and /proc 28.1. /dev 28.2. /proc 29. Of Zeros and Nulls 30. Debugging 31. Options 32. Gotchas 33. Scripting With Style 33.1. Unofficial Shell Scripting Stylesheet 34. Miscellany 34.1. Interactive and noninteractive shells and scripts 34.2. Shell Wrappers 34.3. Tests and Comparisons: Alternatives 34.4. Recursion 34.5. "Colorizing" Scripts 34.6. Optimizations 34.7. Assorted Tips 34.8. Security Issues 34.9. Portability Issues 34.10. Shell Scripting Under Windows 35. Bash, version 2

Part 4. Advanced Topics

264

Chapter 19. Regular Expressions

To fully utilize the power of shell scripting, you need to master Regular Expressions. Certain commands and utilities commonly used in scripts, such as grep, expr, sed and awk interpret and use REs.

19.1. A Brief Introduction to Regular Expressions

An expression is a string of characters. Those characters that have an interpretation above and beyond their literal meaning are called metacharacters. A quote symbol, for example, may denote speech by a person, ditto, or a metameaning for the symbols that follow. Regular Expressions are sets of characters and/or metacharacters that UNIX endows with special features. [47] The main uses for Regular Expressions (REs) are text searches and string manipulation. An RE matches a single character or a set of characters (a substring or an entire string). The asterisk * matches any number of repeats of the character string or RE preceding it, including zero. "1133*" matches 11 + one or more 3's + possibly other characters: 113, 1133, 111312, and so forth. The dot . matches any one character, except a newline. [48] "13." matches 13 + at least one of any character (including a space): 1133, 11333, but not 13 (additional character missing). The caret ^ matches the beginning of a line, but sometimes, depending on context, negates the meaning of a set of characters in an RE. The dollar sign $ at the end of an RE matches the end of a line. "^$" matches blank lines. The ^ and $ are known as anchors, since they indicate or anchor a position within an RE. Brackets [...] enclose a set of characters to match in a single RE. "[xyz]" matches the characters x, y, or z. "[cn]" matches any of the characters in the range c to n. "[BPky]" matches any of the characters in the ranges B to P and k to y. "[az09]" matches any lowercase letter or any digit. "[^bd]" matches all characters except those in the range b to d. This is an instance of ^ negating or inverting the meaning of the following RE (taking on a role similar to ! in a different context).

Chapter 19. Regular Expressions

265

Advanced BashScripting Guide Combined sequences of bracketed characters match common word patterns. "[Yy][Ee][Ss]" matches yes, Yes, YES, yEs, and so forth. "[09][09][09][09][09][09][09][09][09]" matches any Social Security number. The backslash \ escapes a special character, which means that character gets interpreted literally. A "\$" reverts back to its literal meaning of "$", rather than its RE meaning of endofline. Likewise a "\\" has the literal meaning of "\". Escaped "angle brackets" \<...\> mark word boundaries. The angle brackets must be escaped, since otherwise they have only their literal character meaning. "\<the\>" matches the word "the", but not the words "them", "there", "other", etc.
bash$ cat textfile This is line 1, of which there is only one instance. This is the only instance of line 2. This is line 3, another line. This is line 4.

bash$ grep 'the' textfile This is line 1, of which there is only one instance. This is the only instance of line 2. This is line 3, another line.

bash$ grep '\<the\>' textfile This is the only instance of line 2.

Extended REs. Used in egrep, awk, and Perl The question mark ? matches zero or one of the previous RE. It is generally used for matching single characters. The plus + matches one or more of the previous RE. It serves a role similar to the *, but does not match zero occurrences.
# GNU versions of sed and awk can use "+", # but it needs to be escaped. echo a111b | sed ne '/a1\+b/p' echo a111b | grep 'a1\+b' echo a111b | gawk '/a1+b/' # All of above are equivalent. # Thanks, S.C.

Escaped "curly brackets" \{ \} indicate the number of occurrences of a preceding RE to match. It is necessary to escape the curly brackets since they have only their literal character meaning otherwise. This usage is technically not part of the basic RE set. "[09]\{5\}" matches exactly five digits (characters in the range of 0 to 9). Chapter 19. Regular Expressions 266

Advanced BashScripting Guide Curly brackets are not available as an RE in the "classic" (nonPOSIX compliant) version of awk. However, gawk has the reinterval option that permits them (without being escaped).
bash$ echo 2222 | gawk reinterval '/2{3}/' 2222

Perl and some egrep versions do not require escaping the curly brackets. Parentheses ( ) enclose groups of REs. They are useful with the following "|" operator and in substring extraction using expr. The | "or" RE operator matches any of a set of alternate characters.
bash$ egrep 're(a|e)d' misc.txt People who read seem to be better informed than those who do not. The clarinet produces sound by the vibration of its reed.

Some versions of sed, ed, and ex support escaped versions of the extended regular expressions described above. POSIX Character Classes. [:class:] This is an alternate method of specifying a range of characters to match. [:alnum:] matches alphabetic or numeric characters. This is equivalent to [AZaz09]. [:alpha:] matches alphabetic characters. This is equivalent to [AZaz]. [:blank:] matches a space or a tab. [:cntrl:] matches control characters. [:digit:] matches (decimal) digits. This is equivalent to [09]. [:graph:] (graphic printable characters). Matches characters in the range of ASCII 33 126. This is the same as [:print:], below, but excluding the space character. [:lower:] matches lowercase alphabetic characters. This is equivalent to [az]. [:print:] (printable characters). Matches characters in the range of ASCII 32 126. This is the same as [:graph:], above, but adding the space character. [:space:] matches whitespace characters (space and horizontal tab). [:upper:] matches uppercase alphabetic characters. This is equivalent to [AZ]. [:xdigit:] matches hexadecimal digits. This is equivalent to [09AFaf]. POSIX character classes generally require quoting or double brackets ([[ ]]).
bash$ grep [[:digit:]] test.file abc=723

These character classes may even be used with globbing, to a limited extent.
bash$ ls l ?[[:digit:]][[:digit:]]? rwrwr 1 bozo bozo 0 Aug 21 14:47 a33b

To see POSIX character classes used in scripts, refer to Example 1214 and Example 1215. Chapter 19. Regular Expressions 267

Advanced BashScripting Guide Sed, awk, and Perl, used as filters in scripts, take REs as arguments when "sifting" or transforming files or I/O streams. See Example A13 and Example A18 for illustrations of this. "Sed & Awk", by Dougherty and Robbins gives a very complete and lucid treatment of REs (see the Bibliography).

19.2. Globbing
Bash itself cannot recognize Regular Expressions. In scripts, commands and utilities, such as sed and awk, interpret RE's. Bash does carry out filename expansion, a process known as "globbing", but this does not use the standard RE set. Instead, globbing recognizes and expands wildcards. Globbing interprets the standard wildcard characters, * and ?, character lists in square brackets, and certain other special characters (such as ^ for negating the sense of a match). There are some important limitations on wildcard characters in globbing, however. Strings containing * will not match filenames that start with a dot, as, for example, .bashrc. [49] Likewise, the ? has a different meaning in globbing than as part of an RE.
bash$ ls l total 2 rwrwr rwrwr rwrwr rwrwr rwrwr

1 1 1 1 1

bozo bozo bozo bozo bozo

bozo bozo bozo bozo bozo

0 0 0 466 758

Aug 6 Aug 6 Aug 6 Aug 6 Jul 30

18:42 18:42 18:42 17:48 09:02

a.1 b.1 c.1 t2.sh test1.txt

bash$ ls l t?.sh rwrwr 1 bozo

bozo

466 Aug

6 17:48 t2.sh

bash$ ls l [ab]* rwrwr 1 bozo bozo rwrwr 1 bozo bozo bash$ ls l [ac]* rwrwr 1 bozo bozo rwrwr 1 bozo bozo rwrwr 1 bozo bozo bash$ ls l [^ab]* rwrwr 1 bozo bozo rwrwr 1 bozo bozo rwrwr 1 bozo bozo bash$ ls l {b*,c*,*est*} rwrwr 1 bozo bozo rwrwr 1 bozo bozo rwrwr 1 bozo bozo

0 Aug 6 18:42 a.1 0 Aug 6 18:42 b.1

0 Aug 6 18:42 a.1 0 Aug 6 18:42 b.1 0 Aug 6 18:42 c.1

0 Aug 6 18:42 c.1 466 Aug 6 17:48 t2.sh 758 Jul 30 09:02 test1.txt

0 Aug 6 18:42 b.1 0 Aug 6 18:42 c.1 758 Jul 30 09:02 test1.txt

bash$ echo * a.1 b.1 c.1 t2.sh test1.txt bash$ echo t* t2.sh test1.txt

Even an echo command performs wildcard expansion on filenames. Chapter 19. Regular Expressions 268

Advanced BashScripting Guide See also Example 104.

Chapter 19. Regular Expressions

269

Chapter 20. Subshells

Running a shell script launches another instance of the command processor. Just as your commands are interpreted at the command line prompt, similarly does a script batch process a list of commands in a file. Each shell script running is, in effect, a subprocess of the parent shell, the one that gives you the prompt at the console or in an xterm window. A shell script can also launch subprocesses. These subshells let the script do parallel processing, in effect executing multiple subtasks simultaneously. Command List in Parentheses ( command1; command2; command3; ... ) A command list embedded between parentheses runs as a subshell. Variables in a subshell are not visible outside the block of code in the subshell. They are not accessible to the parent process, to the shell that launched the subshell. These are, in effect, local variables.

Example 201. Variable scope in a subshell

#!/bin/bash # subshell.sh echo outer_variable=Outer ( inner_variable=Inner echo "From subshell, \"inner_variable\" = $inner_variable" echo "From subshell, \"outer\" = $outer_variable" ) echo if [ z "$inner_variable" ] then echo "inner_variable undefined in main body of shell" else echo "inner_variable defined in main body of shell" fi echo "From main body of shell, \"inner_variable\" = $inner_variable" # $inner_variable will show as uninitialized because # variables defined in a subshell are "local variables". echo exit 0

See also Example 321. + Chapter 20. Subshells 270

Advanced BashScripting Guide Directory changes made in a subshell do not carry over to the parent shell.

Example 202. List User Profiles

#!/bin/bash # allprofs.sh: print all user profiles # This script written by Heiner Steven, and modified by the document author. FILE=.bashrc # File containing user profile, #+ was ".profile" in original script.

for home in `awk F: '{print $6}' /etc/passwd` do [ d "$home" ] || continue # If no home directory, go to next. [ r "$home" ] || continue # If not readable, go to next. (cd $home; [ e $FILE ] && less $FILE) done # When script terminates, there is no need to 'cd' back to original directory, #+ because 'cd $home' takes place in a subshell. exit 0

A subshell may be used to set up a "dedicated environment" for a command group.

COMMAND1 COMMAND2 COMMAND3 ( IFS=: PATH=/bin unset TERMINFO set C shift 5 COMMAND4 COMMAND5 exit 3 # Only exits the subshell. ) # The parent shell has not been affected, and the environment is preserved. COMMAND6 COMMAND7

One application of this is testing whether a variable is defined.

if (set u; : $variable) 2> /dev/null then echo "Variable is set." fi # Could also be written [[ ${variablex} != x || ${variabley} != y ]] # or [[ ${variablex} != x$variable ]] # or [[ ${variable+x} = x ]])

Another application is checking for a lock file:

if (set C; : > lock_file) 2> /dev/null then echo "Another user is already running that script." exit 65

Chapter 20. Subshells

271

Advanced BashScripting Guide

fi # Thanks, S.C.

Processes may execute in parallel within different subshells. This permits breaking a complex task into subcomponents processed concurrently.

Example 203. Running parallel processes in subshells

(cat list1 list2 list3 | sort | uniq > list123) & (cat list4 list5 list6 | sort | uniq > list456) & # Merges and sorts both sets of lists simultaneously. # Running in background ensures parallel execution. # # Same effect as # cat list1 list2 list3 | sort | uniq > list123 & # cat list4 list5 list6 | sort | uniq > list456 & wait # Don't execute the next command until subshells finish.

diff list123 list456

Redirecting I/O to a subshell uses the "|" pipe operator, as in ls al | (command). A command block between curly braces does not launch a subshell. { command1; command2; command3; ... }

Chapter 20. Subshells

272

Chapter 21. Restricted Shells

Disabled commands in restricted shells Running a script or portion of a script in restricted mode disables certain commands that would otherwise be available. This is a security measure intended to limit the privileges of the script user and to minimize possible damage from running the script. Using cd to change the working directory. Changing the values of the $PATH, $SHELL, $BASH_ENV, or $ENV environmental variables. Reading or changing the $SHELLOPTS, shell environmental options. Output redirection. Invoking commands containing one or more /'s. Invoking exec to substitute a different process for the shell. Various other commands that would enable monkeying with or attempting to subvert the script for an unintended purpose. Getting out of restricted mode within the script.

Example 211. Running a script in restricted mode

#!/bin/bash # Starting the script with "#!/bin/bash r" # runs entire script in restricted mode. echo echo "Changing directory." cd /usr/local echo "Now in `pwd`" echo "Coming back home." cd echo "Now in `pwd`" echo # Everything up to here in normal, unrestricted mode. set r # set restricted has same effect. echo "==> Now in restricted mode. <==" echo echo echo "Attempting directory change in restricted mode." cd .. echo "Still in `pwd`" echo echo echo "\$SHELL = $SHELL" echo "Attempting to change shell in restricted mode." SHELL="/bin/ash" echo echo "\$SHELL= $SHELL" echo echo

Chapter 21. Restricted Shells

273

Advanced BashScripting Guide

echo "Attempting to redirect output in restricted mode." ls l /usr/bin > bin.files ls l bin.files # Try to list attempted file creation effort. echo exit 0

Chapter 21. Restricted Shells

274

Chapter 22. Process Substitution

Process substitution is the counterpart to command substitution. Command substitution sets a variable to the result of a command, as in dir_contents=`ls al` or xref=$( grep word datafile). Process substitution feeds the output of a process to another process (in other words, it sends the results of a command to another command). Command substitution template command within parentheses >(command) <(command) These initiate process substitution. This uses /dev/fd/<n> files to send the results of the process within parentheses to another process. [50] There is no space between the the "<" or ">" and the parentheses. Space there would give an error message.
bash$ echo >(true) /dev/fd/63 bash$ echo <(true) /dev/fd/63

Bash creates a pipe with two file descriptors, fIn and fOut. The stdin of true connects to fOut (dup2(fOut, 0)), then Bash passes a /dev/fd/fIn argument to echo. On systems lacking /dev/fd/<n> files, Bash may use temporary files. (Thanks, S.C.)
cat <(ls l) # Same as

ls l | cat

sort k 9 <(ls l /bin) <(ls l /usr/bin) <(ls l /usr/X11R6/bin) # Lists all the files in the 3 main 'bin' directories, and sorts by filename. # Note that three (count 'em) distinct commands are fed to 'sort'.

diff <(command1) <(command2)

# Gives difference in command output.

tar cf >(bzip2 c > file.tar.bz2) $directory_name # Calls "tar cf /dev/fd/?? $directory_name", and "bzip2 c > file.tar.bz2". # # Because of the /dev/fd/<n> system feature, # the pipe between both commands does not need to be named. # # This can be emulated. # bzip2 c < pipe > file.tar.bz2& tar cf pipe $directory_name rm pipe # or exec 3>&1 tar cf /dev/fd/4 $directory_name 4>&1 >&3 3>& | bzip2 c > file.tar.bz2 3>&

Chapter 22. Process Substitution

275

Advanced BashScripting Guide

exec 3>&

# Thanks, S.C.

A reader of this document sent in the following interesting example of process substitution.
# Script fragment taken from SuSE distribution: while read des what mask iface; do # Some commands ... done < <(route n)

# To test it, let's make it do something. while read des what mask iface; do echo $des $what $mask $iface done < <(route n) # # # # Output: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo

# As S.C. points out, an easiertounderstand equivalent is: route n | while read des what mask iface; do # Variables set from output of pipe. echo $des $what $mask $iface done # This yields the same output as above. # However, as Ulrich Gayer points out . . . #+ this simplified equivalent uses a subshell for the while loop, #+ and therefore the variables disappear when the pipe terminates.

Chapter 22. Process Substitution

276

Chapter 23. Functions

Like "real" programming languages, Bash has functions, though in a somewhat limited implementation. A function is a subroutine, a code block that implements a set of operations, a "black box" that performs a specified task. Wherever there is repetitive code, when a task repeats with only slight variations, then consider using a function. function function_name { command... } or function_name () { command... } This second form will cheer the hearts of C programmers (and is more portable). As in C, the function's opening bracket may optionally appear on the second line. function_name () { command... } Functions are called, triggered, simply by invoking their names.

Example 231. Simple function

#!/bin/bash funky () { echo "This is a funky function." echo "Now exiting funky function." } # Function declaration must precede call. # Now, call the function. funky exit 0

The function definition must precede the first call to it. There is no method of "declaring" the function, as, for example, in C.
f1 # Will give an error message, since function "f1" not yet defined. declare f f1 # This doesn't help either.

Chapter 23. Functions

277

Advanced BashScripting Guide

f1 # However... # Still an error message.

f1 () { echo "Calling function \"f2\" from within function \"f1\"." f2 } f2 () { echo "Function \"f2\"." } f1 # Function "f2" is not actually called until this point, #+ although it is referenced before its definition. # This is permissable. # Thanks, S.C.

It is even possible to nest a function within another function, although this is not very useful.
f1 () { f2 () # nested { echo "Function \"f2\", inside \"f1\"." } } f2 # # Gives an error message. Even a preceding "declare f f2" wouldn't help.

echo f1 f2 # Does nothing, since calling "f1" does not automatically call "f2". # Now, it's all right to call "f2", #+ since its definition has been made visible by calling "f1". # Thanks, S.C.

Function declarations can appear in unlikely places, even where a command would otherwise go.
ls l | foo() { echo "foo"; } # Permissable, but useless.

if [ "$USER" = bozo ] then bozo_greet () # Function definition embedded in an if/then construct. { echo "Hello, Bozo." } fi bozo_greet # Works only for Bozo, and other users get an error.

Chapter 23. Functions

278

Advanced BashScripting Guide

# Something like this might be useful in some contexts. NO_EXIT=1 # Will enable function definition below. [[ $NO_EXIT eq 1 ]] && exit() { true; } # Function definition in an "andlist". # If $NO_EXIT is 1, declares "exit ()". # This disables the "exit" builtin by aliasing it to "true". exit # Invokes "exit ()" function, not "exit" builtin.

# Thanks, S.C.

23.1. Complex Functions and Function Complexities

Functions may process arguments passed to them and return an exit status to the script for further processing.
function_name $arg1 $arg2

The function refers to the passed arguments by position (as if they were positional parameters), that is, $1, $2, and so forth.

Example 232. Function Taking Parameters

#!/bin/bash # Functions and parameters DEFAULT=default func2 () { if [ z "$1" ] then echo "Parameter #1 is zero length." else echo "Param #1 is \"$1\"." fi variable=${1$DEFAULT} echo "variable = $variable" # Default param value.

# Is parameter #1 zero length? # Or no parameter passed.

# #+ # # #+

What does parameter substitution show? It distinguishes between no param and a null param.

if [ "$2" ] then echo "Parameter #2 is \"$2\"." fi return 0 } echo echo "Nothing passed." func2 echo

# Called with no params

Chapter 23. Functions

279

Advanced BashScripting Guide

echo "Zerolength parameter passed." func2 "" # Called with zerolength param echo echo "Null parameter passed." func2 "$uninitialized_param" echo

# Called with uninitialized param

echo "One parameter passed." func2 first # Called with one param echo echo "Two parameters passed." func2 first second # Called with two params echo echo "\"\" \"second\" passed." func2 "" second # Called with zerolength first parameter echo # and ASCII string as a second one. exit 0

The shift command works on arguments passed to functions (see Example 3410). In contrast to certain other programming languages, shell scripts normally pass only value parameters to functions. [51] Variable names (which are actually pointers), if passed as parameters to functions, will be treated as string literals and cannot be dereferenced. Functions interpret their arguments literally. Exit and Return exit status Functions return a value, called an exit status. The exit status may be explicitly specified by a return statement, otherwise it is the exit status of the last command in the function (0 if successful, and a nonzero error code if not). This exit status may be used in the script by referencing it as $?. This mechanism effectively permits script functions to have a "return value" similar to C functions. return Terminates a function. A return command [52] optionally takes an integer argument, which is returned to the calling script as the "exit status" of the function, and this exit status is assigned to the variable $?.

Example 233. Maximum of two numbers

#!/bin/bash # max.sh: Maximum of two integers. E_PARAM_ERR=198 EQUAL=199 # If less than 2 params passed to function. # Return value if both params equal.

max2 () # Returns larger of two numbers. { # Note: numbers compared must be less than 257. if [ z "$2" ] then return $E_PARAM_ERR

Chapter 23. Functions

280

Advanced BashScripting Guide

fi if [ "$1" eq "$2" ] then return $EQUAL else if [ "$1" gt "$2" ] then return $1 else return $2 fi fi } max2 33 34 return_val=$? if [ "$return_val" eq $E_PARAM_ERR ] then echo "Need to pass two parameters to the function." elif [ "$return_val" eq $EQUAL ] then echo "The two numbers are equal." else echo "The larger of the two numbers is $return_val." fi

exit 0 # # # #+ Exercise (easy): Convert this to an interactive script, that is, have the script ask for input (two numbers).

For a function to return a string or array, use a dedicated variable.

count_lines_in_etc_passwd() { [[ r /etc/passwd ]] && REPLY=$(echo $(wc l < /etc/passwd)) # If /etc/passwd is readable, set REPLY to line count. # Returns both a parameter value and status information. } if count_lines_in_etc_passwd then echo "There are $REPLY lines in /etc/passwd." else echo "Cannot count lines in /etc/passwd." fi # Thanks, S.C.

Example 234. Converting numbers to Roman numerals

#!/bin/bash # Arabic number to Roman numeral conversion

Chapter 23. Functions

281

Advanced BashScripting Guide

# Range: 0 200 # It's crude, but it works. # Extending the range and otherwise improving the script is left as an exercise. # Usage: roman numbertoconvert LIMIT=200 E_ARG_ERR=65 E_OUT_OF_RANGE=66 if [ z "$1" ] then echo "Usage: `basename $0` numbertoconvert" exit $E_ARG_ERR fi num=$1 if [ "$num" gt $LIMIT ] then echo "Out of range!" exit $E_OUT_OF_RANGE fi to_roman () # Must declare function before first call to it. { number=$1 factor=$2 rchar=$3 let "remainder = number factor" while [ "$remainder" ge 0 ] do echo n $rchar let "number = factor" let "remainder = number factor" done return $number # Exercise: # # Explain how this function works. # Hint: division by successive subtraction. }

to_roman num=$? to_roman num=$? to_roman num=$? to_roman num=$? to_roman num=$? to_roman num=$? to_roman num=$? to_roman num=$? to_roman

$num 100 C $num 90 LXXXX $num 50 L $num 40 XL $num 10 X $num 9 IX $num 5 V $num 4 IV $num 1 I

Chapter 23. Functions

282

Advanced BashScripting Guide

echo exit 0

See also Example 1028. The largest positive integer a function can return is 256. The return command is closely tied to the concept of exit status, which accounts for this particular limitation. Fortunately, there are various workarounds for those situations requiring a large integer return value from a function.

Example 235. Testing large return values in a function

#!/bin/bash # returntest.sh # The largest positive value a function can return is 256. return_test () { return $1 } return_test 27 echo $? return_test 256 echo $? return_test 257 echo $? return_test 151896 echo $? exit 0 # Returns whatever passed to it.

# o.k. # Returns 27. # Still o.k. # Returns 256. # Error! # Returns 1 (return code for miscellaneous error). # However, large negative numbers work. # Returns 151896.

As we have seen, a function can return a large negative value. This also permits returning large positive integer, using a bit of trickery. An alternate method of accomplishing this is to simply assign the "return value" to a global variable.
Return_Val= # Global variable to hold oversize return value of function.

alt_return_test () { fvar=$1 Return_Val=$fvar return # Returns 0 (success). } alt_return_test 1 echo $? echo "return value = $Return_Val"

# 0 # 1

Chapter 23. Functions

283

Advanced BashScripting Guide

alt_return_test 256 echo "return value = $Return_Val" alt_return_test 257 echo "return value = $Return_Val" alt_return_test 25701 echo "return value = $Return_Val" # 256

# 257

#25701

Example 236. Comparing two large integers

#!/bin/bash # max2.sh: Maximum of two LARGE integers. # This is the previous "max.sh" example, # modified to permit comparing large integers. EQUAL=0 MAXRETVAL=256 E_PARAM_ERR=99999 E_NPARAM_ERR=99999 # # # # Return value if both params equal. Maximum positive return value from a function. Parameter error. "Normalized" parameter error.

max2 () # Returns larger of two numbers. { if [ z "$2" ] then return $E_PARAM_ERR fi if [ "$1" eq "$2" ] then return $EQUAL else if [ "$1" gt "$2" ] then retval=$1 else retval=$2 fi fi # # # This is a workaround to enable returning a large integer # from this function. if [ "$retval" gt "$MAXRETVAL" ] # If out of range, then # then let "retval = (( 0 $retval ))" # adjust to a negative value. # (( 0 $VALUE )) changes the sign of VALUE. fi # Large *negative* return values permitted, fortunately. # # return $retval } max2 33001 33997 return_val=$? # # if [ "$return_val" lt 0 ] # If "adjusted" negative number,

Chapter 23. Functions

284

Advanced BashScripting Guide

then # then let "return_val = (( 0 $return_val ))" # renormalize to positive. fi # "Absolute value" of $return_val. # #

if [ "$return_val" eq "$E_NPARAM_ERR" ] then # Parameter error "flag" gets sign changed, too. echo "Error: Too few parameters." elif [ "$return_val" eq "$EQUAL" ] then echo "The two numbers are equal." else echo "The larger of the two numbers is $return_val." fi exit 0

See also Example A8. Exercise: Using what we have just learned, extend the previous Roman numerals example to accept arbitrarily large input. Redirection Redirecting the stdin of a function A function is essentially a code block, which means its stdin can be redirected (as in Example 31).

Example 237. Real name from username

#!/bin/bash # From username, gets "real name" from /etc/passwd. ARGCOUNT=1 # Expect one arg. E_WRONGARGS=65 file=/etc/passwd pattern=$1 if [ $# ne "$ARGCOUNT" ] then echo "Usage: `basename $0` USERNAME" exit $E_WRONGARGS fi file_excerpt () # Scan file for pattern, the print relevant portion of line. { while read line # while does not necessarily need "[ condition]" do echo "$line" | grep $1 | awk F":" '{ print $5 }' # Have awk use ":" delimiter. done } <$file # Redirect into function's stdin. file_excerpt $pattern # Yes, this entire script could be reduced to

Chapter 23. Functions

285

Advanced BashScripting Guide

# grep PATTERN /etc/passwd | awk F":" '{ print $5 }' # or # awk F: '/PATTERN/ {print $5}' # or # awk F: '($1 == "username") { print $5 }' # real name from username # However, it might not be as instructive. exit 0

There is an alternative, and perhaps less confusing method of redirecting a function's stdin. This involves redirecting the stdin to an embedded bracketed code block within the function.
# Instead of: Function () { ... } < file # Try this: Function () { { ... } < file } # Similarly, Function () # This works. { { echo $* } | tr a b } Function () { echo $* } | tr a b # This doesn't work.

# A nested code block is mandatory here.

# Thanks, S.C.

23.2. Local Variables

What makes a variable "local"? local variables A variable declared as local is one that is visible only within the block of code in which it appears. It has local "scope". In a function, a local variable has meaning only within that function block.

Example 238. Local variable visibility

#!/bin/bash func ()

Chapter 23. Functions

286

Advanced BashScripting Guide

{ local loc_var=23 # Declared local. echo echo "\"loc_var\" in function = $loc_var" global_var=999 # Not declared local. echo "\"global_var\" in function = $global_var" } func # Now, see if local 'a' exists outside function. echo echo "\"loc_var\" outside function = $loc_var" # "loc_var" outside function = # Nope, $loc_var not visible globally. echo "\"global_var\" outside function = $global_var" # "global_var" outside function = 999 # $global_var is visible globally. echo exit 0

Before a function is called, all variables declared within the function are invisible outside the body of the function, not just those explicitly declared as local.
#!/bin/bash func () { global_var=37 }

# Visible only within the function block #+ before the function has been called. # END OF FUNCTION # global_var = # Function "func" has not yet been called, #+ so $global_var is not visible here.

echo "global_var = $global_var"

func echo "global_var = $global_var"

# global_var = 37 # Has been set by function call.

23.2.1. Local variables make recursion possible.

Local variables permit recursion, [53] but this practice generally involves much computational overhead and is definitely not recommended in a shell script. [54]

Example 239. Recursion, using a local variable

#!/bin/bash # # factorial

# Does bash permit recursion? # Well, yes, but...

Chapter 23. Functions

287

Advanced BashScripting Guide

# You gotta have rocks in your head to try it.

MAX_ARG=5 E_WRONG_ARGS=65 E_RANGE_ERR=66

if [ z "$1" ] then echo "Usage: `basename $0` number" exit $E_WRONG_ARGS fi if [ "$1" gt $MAX_ARG ] then echo "Out of range (5 is maximum)." # Let's get real now. # If you want greater range than this, # rewrite it in a real programming language. exit $E_RANGE_ERR fi fact () { local number=$1 # Variable "number" must be declared as local, # otherwise this doesn't work. if [ "$number" eq 0 ] then factorial=1 # Factorial of 0 = 1. else let "decrnum = number 1" fact $decrnum # Recursive function call. let "factorial = $number * $?" fi return $factorial } fact $1 echo "Factorial of $1 is $?." exit 0

See also Example A17 for an example of recursion in a script. Be aware that recursion is resourceintensive and executes slowly, and is therefore generally not appropriate to use in a script.

Chapter 23. Functions

288

Chapter 24. Aliases

A Bash alias is essentially nothing more than a keyboard shortcut, an abbreviation, a means of avoiding typing a long command sequence. If, for example, we include alias lm="ls l | more" in the ~/.bashrc file, then each lm typed at the command line will automatically be replaced by a ls l | more. This can save a great deal of typing at the command line and avoid having to remember complex combinations of commands and options. Setting alias rm="rm i" (interactive mode delete) may save a good deal of grief, since it can prevent inadvertently losing important files. In a script, aliases have very limited usefulness. It would be quite nice if aliases could assume some of the functionality of the C preprocessor, such as macro expansion, but unfortunately Bash does not expand arguments within the alias body. [55] Moreover, a script fails to expand an alias itself within "compound constructs", such as if/then statements, loops, and functions. An added limitation is that an alias will not expand recursively. Almost invariably, whatever we would like an alias to do could be accomplished much more effectively with a function.

Example 241. Aliases within a script

#!/bin/bash # Invoke with command line parameter to exercise last section of this script. shopt s expand_aliases # Must set this option, else script will not expand aliases.

# First, some fun. alias Jesse_James='echo "\"Alias Jesse James\" was a 1959 comedy starring Bob Hope."' Jesse_James echo; echo; echo; alias ll="ls l" # May use either single (') or double (") quotes to define an alias. echo "Trying aliased \"ll\":" ll /usr/X11R6/bin/mk* #* Alias works. echo directory=/usr/X11R6/bin/ prefix=mk* # See if wildcard causes problems. echo "Variables \"directory\" + \"prefix\" = $directory$prefix" echo alias lll="ls l $directory$prefix" echo "Trying aliased \"lll\":" lll # Long listing of all files in /usr/X11R6/bin stating with mk. # Alias handles concatenated variables, including wildcard o.k.

TRUE=1

Chapter 24. Aliases

289

Advanced BashScripting Guide

echo if [ TRUE ] then alias rr="ls l" echo "Trying aliased \"rr\" within if/then statement:" rr /usr/X11R6/bin/mk* #* Error message results! # Aliases not expanded within compound statements. echo "However, previously expanded alias still recognized:" ll /usr/X11R6/bin/mk* fi echo count=0 while [ $count lt 3 ] do alias rrr="ls l" echo "Trying aliased \"rrr\" within \"while\" loop:" rrr /usr/X11R6/bin/mk* #* Alias will not expand here either. # alias.sh: line 57: rrr: command not found let count+=1 done echo; echo alias xyz='cat $0' # Script lists itself. # Note strong quotes.

xyz # This seems to work, #+ although the Bash documentation suggests that it shouldn't. # # However, as Steve Jacobson points out, #+ the "$0" parameter expands immediately upon declaration of the alias. exit 0

The unalias command removes a previously set alias.

Example 242. unalias: Setting and unsetting an alias

#!/bin/bash shopt s expand_aliases alias llm='ls al | more' llm echo unalias llm # Unset alias. llm # Error message results, since 'llm' no longer recognized. exit 0 bash$ ./unalias.sh total 6 drwxrwxrx 2 bozo # Enables alias expansion.

bozo

3072 Feb

6 14:04 .

Chapter 24. Aliases

290

Advanced BashScripting Guide

drwxrxrx rwxrxrx 40 bozo 1 bozo bozo bozo 2048 Feb 199 Feb 6 14:04 .. 6 14:04 unalias.sh

./unalias.sh: llm: command not found

Chapter 24. Aliases

291

Chapter 25. List Constructs

The "and list" and "or list" constructs provide a means of processing a number of commands consecutively. These can effectively replace complex nested if/then or even case statements. Chaining together commands and list
command1 && command2 && command3 && ... commandn

Each command executes in turn provided that the previous command has given a return value of true (zero). At the first false (nonzero) return, the command chain terminates (the first command returning false is the last one to execute). Example 251. Using an "and list" to test for commandline arguments
#!/bin/bash # "and list" if [ ! z "$1" ] && echo "Argument #1 = $1" && [ ! z "$2" ] && echo "Argument #2 = $2" then echo "At least 2 arguments passed to script." # All the chained commands return true. else echo "Less than 2 arguments passed to script." # At least one of the chained commands returns false. fi # Note that "if [ ! z $1 ]" works, but its supposed equivalent, # if [ n $1 ] does not. However, quoting fixes this. # if [ n "$1" ] works. Careful! # It is best to always quote tested variables.

# This if [ ! then echo fi if [ ! then echo echo else echo fi # It's

accomplishes the same thing, using "pure" if/then statements. z "$1" ] "Argument #1 = $1" z "$2" ] "Argument #2 = $2" "At least 2 arguments passed to script." "Less than 2 arguments passed to script." longer and less elegant than using an "and list".

exit 0

Example 252. Another commandline arg test using an "and list"

Chapter 25. List Constructs

292

Advanced BashScripting Guide

#!/bin/bash ARGS=1 E_BADARGS=65 # Number of arguments expected. # Exit value if incorrect number of args passed.

test $# ne $ARGS && echo "Usage: `basename $0` $ARGS argument(s)" && exit $E_BADARGS # If condition1 true (wrong number of args passed to script), # then the rest of the line executes, and script terminates. # Line below executes only if the above test fails. echo "Correct number of arguments passed to this script." exit 0 # To check exit value, do a "echo $?" after script termination.

Of course, an and list can also set variables to a default value.

arg1=$@ # Set $arg1 to command line arguments, if any.

[ z "$arg1" ] && arg1=DEFAULT # Set to DEFAULT if not specified on command line.

or list
command1 || command2 || command3 || ... commandn

Each command executes in turn for as long as the previous command returns false. At the first true return, the command chain terminates (the first command returning true is the last one to execute). This is obviously the inverse of the "and list". Example 253. Using "or lists" in combination with an "and list"
#!/bin/bash # # delete.sh, notsocunning file deletion utility. Usage: delete filename

E_BADARGS=65 if [ z "$1" ] then echo "Usage: `basename $0` filename" exit $E_BADARGS # No arg? Bail out. else file=$1 # Set filename. fi

[ ! f "$file" ] && echo "File \"$file\" not found. \ Cowardly refusing to delete a nonexistent file." # AND LIST, to give error message if file not present. # Note echo message continued on to a second line with an escape. [ ! f "$file" ] || (rm f $file; echo "File \"$file\" deleted.") # OR LIST, to delete file if present. # Note logic inversion above.

Chapter 25. List Constructs

293

Advanced BashScripting Guide

# AND LIST executes on true, OR LIST on false. exit 0

If the first command in an "or list" returns true, it will execute. The exit status of an and list or an or list is the exit status of the last command executed. Clever combinations of "and" and "or" lists are possible, but the logic may easily become convoluted and require extensive debugging.
false && true || echo false # Same result as ( false && true ) || echo false # But *not* false && ( true || echo false ) # false

# false # (nothing echoed)

# Note lefttoright grouping and evaluation of statements, #+ since the logic operators "&&" and "||" have equal precedence. # # It's best to avoid such complexities, unless you know what you're doing. Thanks, S.C.

See Example A8 and Example 74 for illustrations of using an and / or list to test variables.

Chapter 25. List Constructs

294

Chapter 26. Arrays

Newer versions of Bash support onedimensional arrays. Array elements may be initialized with the variable[xx] notation. Alternatively, a script may introduce the entire array by an explicit declare a variable statement. To dereference (find the contents of) an array element, use curly bracket notation, that is, ${variable[xx]}.

Example 261. Simple array usage

#!/bin/bash

area[11]=23 area[13]=37 area[51]=UFOs # Array members need not be consecutive or contiguous. # Some members of the array can be left uninitialized. # Gaps in the array are o.k.

echo n "area[11] = " echo ${area[11]} # echo n "area[13] = " echo ${area[13]}

{curly brackets} needed

echo "Contents of area[51] are ${area[51]}." # Contents of uninitialized array variable print blank. echo n "area[43] = " echo ${area[43]} echo "(area[43] unassigned)" echo # Sum of two array variables assigned to third area[5]=`expr ${area[11]} + ${area[13]}` echo "area[5] = area[11] + area[13]" echo n "area[5] = " echo ${area[5]} area[6]=`expr ${area[11]} + ${area[51]}` echo "area[6] = area[11] + area[51]" echo n "area[6] = " echo ${area[6]} # This fails because adding an integer to a string is not permitted. echo; echo; echo # # # # Another array, "area2". Another way of assigning array variables... array_name=( XXX YYY ZZZ ... )

area2=( zero one two three four )

Chapter 26. Arrays

295

Advanced BashScripting Guide

echo n "area2[0] = " echo ${area2[0]} # Aha, zerobased indexing (first element of array is [0], not [1]). echo n "area2[1] = " echo ${area2[1]} # [1] is second element of array. # echo; echo; echo # # # # Yet another array, "area3". Yet another way of assigning array variables... array_name=([xx]=XXX [yy]=YYY ...)

area3=([17]=seventeen [24]=twentyfour) echo n "area3[17] = " echo ${area3[17]} echo n "area3[24] = " echo ${area3[24]} # exit 0

Bash permits array operations on variables, even if the variables are not explicitly declared as arrays.
string=abcABC123ABCabc echo ${string[@]} echo ${string[*]} echo ${string[0]} echo ${string[1]} echo ${#string[@]}

# # # # # # # #

abcABC123ABCabc abcABC123ABCabc abcABC123ABCabc No output! Why? 1 One element in the array. The string itself.

# Thank you, Michael Zick, for pointing this out.

Once again this demonstrates that Bash variables are untyped.

Example 262. Formatting a poem

#!/bin/bash # poem.sh: Prettyprints one of the author's favorite poems. # Lines of the poem (single stanza). Line[1]="I do not know which to prefer," Line[2]="The beauty of inflections" Line[3]="Or the beauty of innuendoes," Line[4]="The blackbird whistling" Line[5]="Or just after." # Attribution. Attrib[1]=" Wallace Stevens"

Chapter 26. Arrays

296

Advanced BashScripting Guide

Attrib[2]="\"Thirteen Ways of Looking at a Blackbird\"" # Above poem is in the Public Domain (copyright expired). for index in 1 2 3 4 5 # Five lines. do printf " %s\n" "${Line[index]}" done for index in 1 2 do printf " done exit 0 # Two attribution lines. %s\n" "${Attrib[index]}"

Array variables have a syntax all their own, and even standard Bash commands and operators have special options adapted for array use.
array=( zero one two three four five ) echo ${array[0]} echo ${array:0} echo ${array:1} # # # # # #+ # # zero zero Parameter expansion of first element. ero Parameter expansion of first element, starting at position #1 (2nd character). 4 Length of first element of array.

echo ${#array}

array2=( [0]="first element" [1]="second element" [3]="fourth element" ) echo ${array2[0]} echo ${array2[1]} echo ${array2[2]} echo ${array2[3]} # # # # # first element second element Skipped in initialization, therefore null. fourth element

In an array context, some Bash builtins have a slightly altered meaning. For example, unset deletes array elements, or even an entire array.

Example 263. Some special properties of arrays

#!/bin/bash declare a colors # Permits declaring an array without specifying its size. echo "Enter your favorite colors (separated from each other by a space)." read a colors # Enter at least 3 colors to demonstrate features below. # Special option to 'read' command, #+ allowing assignment of elements in an array. echo

Chapter 26. Arrays

297

Advanced BashScripting Guide

element_count=${#colors[@]} # Special syntax to extract number of elements in array. # element_count=${#colors[*]} works also. # # The "@" variable allows word splitting within quotes #+ (extracts variables separated by whitespace). index=0 while [ "$index" lt "$element_count" ] do # List all the elements in the array. echo ${colors[$index]} let "index = $index + 1" done # Each array element listed on a separate line. # If this is not desired, use echo n "${colors[$index]} " # # Doing it with a "for" loop instead: # for i in "${colors[@]}" # do # echo "$i" # done # (Thanks, S.C.) echo # Again, list all the elements in the array, but using a more elegant method. echo ${colors[@]} # echo ${colors[*]} also works. echo # The "unset" command deletes elements of an array, or entire array. unset colors[1] # Remove 2nd element of array. # Same effect as colors[1]= echo ${colors[@]} # List array again, missing 2nd element. unset colors # Delete entire array. # unset colors[*] and #+ unset colors[@] also work.

echo; echo n "Colors gone." echo ${colors[@]} # List array again, now empty. exit 0

As seen in the previous example, either ${array_name[@]} or ${array_name[*]} refers to all the elements of the array. Similarly, to get a count of the number of elements in an array, use either ${#array_name[@]} or ${#array_name[*]}. ${#array_name} is the length (number of characters) of ${array_name[0]}, the first element of the array.

Example 264. Of empty arrays and empty elements

#!/bin/bash # emptyarray.sh # Thanks to Stephane Chazelas for the original example, #+ and to Michael Zick for extending it.

# An empty array is not the same as an array with empty elements.

Chapter 26. Arrays

298

Advanced BashScripting Guide

array0=( first second third ) array1=( '' ) # "array1" has one empty element. array2=( ) # No elements... "array2" is empty. echo ListArray() { echo echo "Elements in array0: ${array0[@]}" echo "Elements in array1: ${array1[@]}" echo "Elements in array2: ${array2[@]}" echo echo "Length of first element in array0 = ${#array0}" echo "Length of first element in array1 = ${#array1}" echo "Length of first element in array2 = ${#array2}" echo echo "Number of elements in array0 = ${#array0[*]}" # 3 echo "Number of elements in array1 = ${#array1[*]}" # 1 echo "Number of elements in array2 = ${#array2[*]}" # 0 }

(surprise!)

# =================================================================== ListArray # Try extending those arrays # Adding array0=( array1=( array2=( an element to an array. "${array0[@]}" "new1" ) "${array1[@]}" "new1" ) "${array2[@]}" "new1" )

ListArray # or array0[${#array0[*]}]="new2" array1[${#array1[*]}]="new2" array2[${#array2[*]}]="new2" ListArray # When extended as above; arrays are 'stacks' # The above is the 'push' # The stack 'height' is: height=${#array2[@]} echo echo "Stack height for array2 = $height" # The 'pop' is: unset array2[${#array2[@]}1] # Arrays are zero based height=${#array2[@]} echo echo "POP" echo "New stack height for array2 = $height" ListArray # List only 2nd and 3rd elements of array0 from=1 # Zero based numbering to=2 # declare a array3=( ${array0[@]:1:2} )

Chapter 26. Arrays

299

Advanced BashScripting Guide

echo echo "Elements in array3: ${array3[@]}"

# Works like a string (array of characters) # Try some other "string" forms # Replacement declare a array4=( ${array0[@]/second/2nd} ) echo echo "Elements in array4: ${array4[@]}" # Replace all matching wildcarded string declare a array5=( ${array0[@]//new?/old} ) echo echo "Elements in array5: ${array5[@]}" # Just when you are getting the feel for this... declare a array6=( ${array0[@]#*new} ) echo # This one might surprise you echo "Elements in array6: ${array6[@]}" declare a array7=( ${array0[@]#new1} ) echo # After array6 this should not be a surprise echo "Elements in array7: ${array7[@]}" # Which looks a lot like... declare a array8=( ${array0[@]/new1/} ) echo echo "Elements in array8: ${array8[@]}" # # #+ # # #+ # So what can one say about this? The string operations are performed on each of the elements in var[@] in succession. Therefore : BASH supports string vector operations If the result is a zero length string, that element disappears in the resulting assignment. Question, are those strings hard or soft quotes?

zap='new*' declare a array9=( ${array0[@]/$zap/} ) echo echo "Elements in array9: ${array9[@]}" # Just when you thought you where still in Kansas... declare a array10=( ${array0[@]#$zap} ) echo echo "Elements in array10: ${array10[@]}" # Compare array7 with array10 # Compare array8 with array9 # Answer, must be soft quotes. exit 0

The relationship of ${array_name[@]} and ${array_name[*]} is analogous to that between $@ and $*. This powerful array notation has a number of uses.

Chapter 26. Arrays

300

Advanced BashScripting Guide

# Copying an array. array2=( "${array1[@]}" ) # or array2="${array1[@]}" # Adding an element to an array. array=( "${array[@]}" "new element" ) # or array[${#array[*]}]="new element" # Thanks, S.C.

The array=( element1 element2 ... elementN ) initialization operation, with the help of command substitution, makes it possible to load the contents of a text file into an array.
#!/bin/bash filename=sample_file # # # # cat sample_file 1 a b c 2 d e fg

declare a array1 array1=( `cat "$filename" | tr '\n' ' '`) # # # Loads contents # of $filename into array1.

list file to stdout. change linefeeds in file to spaces.

echo ${array1[@]} # List the array. # 1 a b c 2 d e fg # # Each whitespaceseparated "word" in the file #+ has been assigned to an element of the array. element_count=${#array1[*]} echo $element_count

# 8

Clever scripting makes it possible to add array operations.

Example 265. Copying and concatenating arrays

#! /bin/bash # CopyArray.sh # # This script written by Michael Zick. # Used here with permission. # HowTo "Pass by Name & Return by Name" #+ or "Building your own assignment statement".

CpArray_Mac() { # Assignment Command Statement Builder

Chapter 26. Arrays

301

Advanced BashScripting Guide

echo echo echo echo echo n n n n n 'eval ' "$2" '=( ${' "$1" '[@]} )'

# Destination name # Source name

# That could all be a single command. # Matter of style only. } declare f CopyArray CopyArray=CpArray_Mac Hype() { # Hype the array named $1. # (Splice it together with array containing "Really Rocks".) # Return in array named $2. local a TMP local a hype=( Really Rocks ) $($CopyArray $1 TMP) TMP=( ${TMP[@]} ${hype[@]} ) $($CopyArray TMP $2) } declare a before=( Advanced Bash Scripting ) declare a after echo "Array Before = ${before[@]}" Hype before after echo "Array After = ${after[@]}" # Too much hype? echo "What ${after[@]:3:2}?" declare a modest=( ${after[@]:2:1} ${after[@]:3:2} ) # substring extraction echo "Array Modest = ${modest[@]}" # What happened to 'before' ? echo "Array Before = ${before[@]}" exit 0 # Function "Pointer" # Statement Builder

Arrays permit deploying old familiar algorithms as shell scripts. Whether this is necessarily a good idea is left to the reader to decide.

Example 266. An old friend: The Bubble Sort Chapter 26. Arrays 302

Advanced BashScripting Guide

#!/bin/bash # bubble.sh: Bubble sort, of sorts. # Recall the algorithm for a bubble sort. In this particular version... # #+ # # # # # With each successive pass through the array to be sorted, compare two adjacent elements, and swap them if out of order. At the end of the first pass, the "heaviest" element has sunk to bottom. At the end of the second pass, the next "heaviest" one has sunk next to bottom. And so forth. This means that each successive pass needs to traverse less of the array. You will therefore notice a speeding up in the printing of the later passes.

exchange() { # Swaps two members of the array. local temp=${Countries[$1]} # Temporary storage #+ for element getting swapped out. Countries[$1]=${Countries[$2]} Countries[$2]=$temp return } declare a Countries # Declare array, #+ optional here since it's initialized below.

# Is it permissable to split an array variable over multiple lines #+ using an escape (\)? # Yes. Countries=(Netherlands Ukraine Zaire Turkey Russia Yemen Syria \ Brazil Argentina Nicaragua Japan Mexico Venezuela Greece England \ Israel Peru Canada Oman Denmark Wales France Kenya \ Xanadu Qatar Liechtenstein Hungary) # "Xanadu" is the mythical place where, according to Coleridge, #+ Kubla Khan did a pleasure dome decree.

clear echo "0: ${Countries[*]}"

# Clear the screen to start with. # List entire array at pass 0.

number_of_elements=${#Countries[@]} let "comparisons = $number_of_elements 1" count=1 # Pass number. while [ "$comparisons" gt 0 ] do index=0 # Beginning of outer loop

# Reset index to start of array after each pass.

while [ "$index" lt "$comparisons" ] # Beginning of inner loop do if [ ${Countries[$index]} \> ${Countries[`expr $index + 1`]} ] # If out of order... # Recalling that \> is ASCII comparison operator #+ within single brackets.

Chapter 26. Arrays

303

Advanced BashScripting Guide

# if [[ ${Countries[$index]} > ${Countries[`expr $index + 1`]} ]] #+ also works. then exchange $index `expr $index + 1` # Swap. fi let "index += 1" done # End of inner loop

let "comparisons = 1" # Since "heaviest" element bubbles to bottom, #+ we need do one less comparison each pass. echo echo "$count: ${Countries[@]}" echo let "count += 1" done

# Print resultant array at end of each pass. # Increment pass count. # End of outer loop # All done.

exit 0

Is it possible to nest arrays within arrays?

#!/bin/bash # Nested array. # Michael Zick provided this example. AnArray=( $(ls inode ignorebackups almostall \ directory fulltime color=none time=status \ sort=time l ${PWD} ) ) # Commands and options. # Spaces are significant . . . and don't quote anything in the above. SubArray=( ${AnArray[@]:11:1} ${AnArray[@]:6:5} ) # Array has two elements, each of which is in turn an array. echo "Current directory and date of last status change:" echo "${SubArray[@]}" exit 0

Embedded arrays in combination with indirect references create some fascinating possibilities

Example 267. Embedded arrays and indirect references

#!/bin/bash # embeddedarrays.sh # Embedded arrays and indirect references. # This script by Dennis Leeuw. # Used with permission. # Modified by document author.

Chapter 26. Arrays

304

Advanced BashScripting Guide

ARRAY1=( VAR1_1=value11 VAR1_2=value12 VAR1_3=value13 ) ARRAY2=( VARIABLE="test" STRING="VAR1=value1 VAR2=value2 VAR3=value3" ARRAY21=${ARRAY1[*]} ) # Embed ARRAY1 within this second array. function print () { OLD_IFS="$IFS" IFS=$'\n'

# To print each array element #+ on a separate line. TEST1="ARRAY2[*]" local ${!TEST1} # See what happens if you delete this line. # Indirect reference. # This makes the components of $TEST1 #+ accessible to this function.

# Let's see what we've got so far. echo echo "\$TEST1 = $TEST1" # Just the name of the variable. echo; echo echo "{\$TEST1} = ${!TEST1}" # Contents of the variable. # That's what an indirect #+ reference does. echo echo ""; echo echo

# Print variable echo "Variable VARIABLE: $VARIABLE" # Print a string element IFS="$OLD_IFS" TEST2="STRING[*]" local ${!TEST2} # Indirect reference (as above). echo "String element VAR2: $VAR2 from STRING" # Print an array element TEST2="ARRAY21[*]" local ${!TEST2} # Indirect reference (as above). echo "Array element VAR1_1: $VAR1_1 from ARRAY21" } print echo exit 0 # As the author of the script notes, #+ "you can easily expand it to create namedhashes in bash." # (Difficult) exercise for the reader: implement this.

Chapter 26. Arrays

305

Advanced BashScripting Guide Arrays enable implementing a shell script version of the Sieve of Eratosthenes. Of course, a resourceintensive application of this nature should really be written in a compiled language, such as C. It runs excruciatingly slowly as a script.

Example 268. Complex array application: Sieve of Eratosthenes

#!/bin/bash # sieve.sh # Sieve of Eratosthenes # Ancient algorithm for finding prime numbers. # This runs a couple of orders of magnitude # slower than the equivalent C program. LOWER_LIMIT=1 # Starting with 1. UPPER_LIMIT=1000 # Up to 1000. # (You may set this higher... if you have time on your hands.) PRIME=1 NON_PRIME=0 let SPLIT=UPPER_LIMIT/2 # Optimization: # Need to test numbers only halfway to upper limit.

declare a Primes # Primes[] is an array.

initialize () { # Initialize the array. i=$LOWER_LIMIT until [ "$i" gt "$UPPER_LIMIT" ] do Primes[i]=$PRIME let "i += 1" done # Assume all array members guilty (prime) # until proven innocent. } print_primes () { # Print out the members of the Primes[] array tagged as prime. i=$LOWER_LIMIT until [ "$i" gt "$UPPER_LIMIT" ] do if [ "${Primes[i]}" eq "$PRIME" ] then printf "%8d" $i

Chapter 26. Arrays

306

Advanced BashScripting Guide

# 8 spaces per number gives nice, even columns. fi let "i += 1" done } sift () # Sift out the nonprimes. { let i=$LOWER_LIMIT+1 # We know 1 is prime, so let's start with 2. until [ "$i" gt "$UPPER_LIMIT" ] do if [ "${Primes[i]}" eq "$PRIME" ] # Don't bother sieving numbers already sieved (tagged as nonprime). then t=$i while [ "$t" le "$UPPER_LIMIT" ] do let "t += $i " Primes[t]=$NON_PRIME # Tag as nonprime all multiples. done fi let "i += 1" done

# Invoke the functions sequentially. initialize sift print_primes # This is what they call structured programming. echo exit 0

# # # Code below line will not execute. # This improved version of the Sieve, by Stephane Chazelas, # executes somewhat faster. # Must invoke with commandline argument (limit of primes). UPPER_LIMIT=$1 let SPLIT=UPPER_LIMIT/2 # From command line. # Halfway to max number.

Chapter 26. Arrays

307

Advanced BashScripting Guide

Primes=( '' $(seq $UPPER_LIMIT) ) i=1 until (( ( i += 1 ) > SPLIT )) # Need check only halfway. do if [[ n $Primes[i] ]] then t=$i until (( ( t += i ) > UPPER_LIMIT )) do Primes[t]= done fi done echo ${Primes[*]} exit 0

Compare this arraybased prime number generator with an alternative that does not use arrays, Example A17. Arrays lend themselves, to some extent, to emulating data structures for which Bash has no native support.

Example 269. Emulating a pushdown stack

#!/bin/bash # stack.sh: pushdown stack simulation # Similar to the CPU stack, a pushdown stack stores data items #+ sequentially, but releases them in reverse order, lastin firstout. BP=100 # Base Pointer of stack array. # Begin at element 100. # Stack Pointer. # Initialize it to "base" (bottom) of stack. # Contents of stack location. # Must use local variable, #+ because of limitation on function return range.

SP=$BP

Data=

declare a stack

push() { if [ z "$1" ] then return fi let "SP = 1" stack[$SP]=$1 return

# Push item on stack. # Nothing to push?

# Bump stack pointer.

Chapter 26. Arrays

308

Advanced BashScripting Guide

} pop() { Data= if [ "$SP" eq "$BP" ] then return fi # Pop item off stack. # Empty out data item. # Stack empty?

# This also keeps SP from getting past 100, #+ i.e., prevents a runaway stack.

Data=${stack[$SP]} let "SP += 1" return }

# Bump stack pointer.

status_report() # Find out what's happening. { echo "" echo "REPORT" echo "Stack Pointer = $SP" echo "Just popped \""$Data"\" off the stack." echo "" echo }

# ======================================================= # Now, for some fun. echo # See if you can pop anything off empty stack. pop status_report echo push garbage pop status_report

# Garbage in, garbage out.

value1=23; push $value1 value2=skidoo; push $value2 value3=FINAL; push $value3 pop status_report pop status_report pop status_report # FINAL # skidoo # 23 # Lastin, firstout!

# Notice how the stack pointer decrements with each push, #+ and increments with each pop. echo # =======================================================

# Exercises:

Chapter 26. Arrays

309

Advanced BashScripting Guide

# # 1) Modify the "push()" function to permit pushing # + multiple element on the stack with a single function call. # 2) Modify the "pop()" function to permit popping # + multiple element from the stack with a single function call. # 3) Using this script as a jumpingoff point, # + write a stackbased 4function calculator. exit 0

Fancy manipulation of array "subscripts" may require intermediate variables. For projects involving this, again consider using a more powerful programming language, such as Perl or C.

Example 2610. Complex array application: Exploring a weird mathematical series

#!/bin/bash # Douglas Hofstadter's notorious "Qseries": # Q(1) = Q(2) = 1 # Q(n) = Q(n Q(n1)) + Q(n Q(n2)), for n>2 # This is a "chaotic" integer series with strange and unpredictable behavior. # The first 20 terms of the series are: # 1 1 2 3 3 4 5 5 6 6 6 8 8 8 10 9 10 11 11 12 # See Hofstadter's book, "Goedel, Escher, Bach: An Eternal Golden Braid", # p. 137, ff.

LIMIT=100 LINEWIDTH=20 Q[1]=1 Q[2]=1

# Number of terms to calculate # Number of terms printed per line # First two terms of series are 1.

echo echo "Qseries [$LIMIT terms]:" echo n "${Q[1]} " # Output first two terms. echo n "${Q[2]} " for ((n=3; n <= $LIMIT; n++)) # Clike loop conditions. do # Q[n] = Q[n Q[n1]] + Q[n Q[n2]] for n>2 # Need to break the expression into intermediate terms, # since Bash doesn't handle complex array arithmetic very well. let "n1 = $n 1" let "n2 = $n 2" t0=`expr $n ${Q[n1]}` t1=`expr $n ${Q[n2]}` T0=${Q[t0]} T1=${Q[t1]} # n1 # n2 # n Q[n1] # n Q[n2] # Q[n Q[n1]] # Q[n Q[n2]]

Chapter 26. Arrays

310

Advanced BashScripting Guide

Q[n]=`expr $T0 + $T1` echo n "${Q[n]} " # Q[n Q[n1]] + Q[n Q[n2]]

if [ `expr $n % $LINEWIDTH` eq 0 ] # Format output. then # mod echo # Break lines into neat chunks. fi done echo exit 0 # This is an iterative implementation of the Qseries. # The more intuitive recursive implementation is left as an exercise. # Warning: calculating this series recursively takes a *very* long time.

Bash supports only onedimensional arrays, however a little trickery permits simulating multidimensional ones.

Example 2611. Simulating a twodimensional array, then tilting it

#!/bin/bash # Simulating a twodimensional array. # A twodimensional array stores rows sequentially. Rows=5 Columns=5 declare a alpha # char alpha [Rows] [Columns]; # Unnecessary declaration.

load_alpha () { local rc=0 local index

for i in A B C D E F G H I J K L M N O P Q R S T U V W X Y do local row=`expr $rc / $Columns` local column=`expr $rc % $Rows` let "index = $row * $Rows + $column" alpha[$index]=$i # alpha[$row][$column] let "rc += 1" done # Simpler would be # declare a alpha=( A B C D E F G H I J K L M N O P Q R S T U V W X Y ) # but this somehow lacks the "flavor" of a twodimensional array. } print_alpha () {

Chapter 26. Arrays

311

Advanced BashScripting Guide

local row=0 local index echo while [ "$row" lt "$Rows" ] do local column=0 while [ "$column" lt "$Columns" ] do let "index = $row * $Rows + $column" echo n "${alpha[index]} " # alpha[$row][$column] let "column += 1" done let "row += 1" echo done # The simpler equivalent is # echo ${alpha[*]} | xargs n $Columns echo } filter () { echo n " " # Filter out negative array indices. # Print out in "row major" order # columns vary # while row (outer loop) remains the same.

# Provides the tilt.

if [[ "$1" ge 0 && "$1" lt "$Rows" && "$2" ge 0 && "$2" lt "$Columns" ]] then let "index = $1 * $Rows + $2" # Now, print it rotated. echo n " ${alpha[index]}" # alpha[$row][$column] fi }

rotate () # Rotate the array 45 degrees { # ("balance" it on its lower lefthand corner). local row local column for (( row = Rows; row > Rows; row )) do # Step through the array backwards.

for (( column = 0; column < Columns; column++ )) do if [ "$row" then let "t1 = let "t2 = else let "t1 = ge 0 ] $column $row" $column" $column"

Chapter 26. Arrays

312

Advanced BashScripting Guide

let "t2 = $column + $row" fi filter $t1 $t2 done echo; echo done # Array rotation inspired by examples (pp. 143146) in # "Advanced C Programming on the IBM PC", by Herbert Mayer # (see bibliography). } # Filter out negative array indices.

## load_alpha # Load the array. print_alpha # Print it out. rotate # Rotate it 45 degrees counterclockwise. ##

# # # # # # # # #

This is a rather contrived, not to mention kludgy simulation. Exercises: 1) Rewrite the array loading and printing functions + in a more intuitive and elegant fashion. 2) Figure out how the array rotation functions work. Hint: think about the implications of backwardsindexing an array.

exit 0

A twodimensional array is essentially equivalent to a onedimensional one, but with additional addressing modes for referencing and manipulating the individual elements by "row" and "column" position. For an even more elaborate example of simulating a twodimensional array, see Example A11.

Chapter 26. Arrays

313

Chapter 27. Files

startup files These files contain the aliases and environmental variables made available to Bash running as a user shell and to all Bash scripts invoked after system initialization. /etc/profile systemwide defaults, mostly setting the environment (all Bournetype shells, not just Bash [56]) /etc/bashrc systemwide functions and aliases for Bash $HOME/.bash_profile userspecific Bash environmental default settings, found in each user's home directory (the local counterpart to /etc/profile) $HOME/.bashrc userspecific Bash init file, found in each user's home directory (the local counterpart to /etc/bashrc). Only interactive shells and user scripts read this file. See Appendix H for a sample .bashrc file. logout file $HOME/.bash_logout userspecific instruction file, found in each user's home directory. Upon exit from a login (Bash) shell, the commands in this file execute.

Chapter 27. Files

314

Chapter 28. /dev and /proc

A Linux or UNIX machine typically has two specialpurpose directories, /dev and /proc.

28.1. /dev
The /dev directory contains entries for the physical devices that may or may not be present in the hardware. [57] The hard drive partitions containing the mounted filesystem(s) have entries in /dev, as a simple df shows.
bash$ df Filesystem Mounted on /dev/hda6 /dev/hda1 /dev/hda8 /dev/hda5

1kblocks 495876 50755 367013 1714416

Used Available Use% 222748 3887 13262 1123624 247527 44248 334803 503704 48% 9% 4% 70% / /boot /home /usr

Among other things, the /dev directory also contains loopback devices, such as /dev/loop0. A loopback device is a gimmick that allows an ordinary file to be accessed as if it were a block device. [58] This enables mounting an entire filesystem within a single large file. See Example 136 and Example 135. A few of the pseudodevices in /dev have other specialized uses, such as /dev/null, /dev/zero and /dev/urandom.

28.2. /proc
The /proc directory is actually a pseudofilesystem. The files in the /proc directory mirror currently running system and kernel processes and contain information and statistics about them.
bash$ cat /proc/devices Character devices: 1 mem 2 pty 3 ttyp 4 ttyS 5 cua 7 vcs 10 misc 14 sound 29 fb 36 netlink 128 ptm 136 pts 162 raw 254 pcmcia Block devices: 1 ramdisk 2 fd 3 ide0 9 md

Chapter 28. /dev and /proc

315

Advanced BashScripting Guide

bash$ cat /proc/interrupts CPU0 0: 84505 XTPIC 1: 3375 XTPIC 2: 0 XTPIC 5: 1 XTPIC 8: 1 XTPIC 12: 4231 XTPIC 14: 109373 XTPIC NMI: 0 ERR: 0

timer keyboard cascade soundblaster rtc PS/2 Mouse ide0

bash$ cat /proc/partitions major minor #blocks name 3 3 3 3 ... 0 1 2 4 3007872 52416 1 165280

rio rmerge rsect ruse wio wmerge wsect wuse running use aveq

hda 4472 22260 114520 94240 3551 18703 50384 549710 0 111550 644030 hda1 27 395 844 960 4 2 14 180 0 800 1140 hda2 0 0 0 0 0 0 0 0 0 0 0 hda4 10 0 20 210 0 0 0 0 0 210 210

bash$ cat /proc/loadavg 0.13 0.42 0.27 2/44 1119

Shell scripts may extract data from certain of the files in /proc. [59]
bash$ cat /proc/filesystems | grep iso9660 iso9660

kernel_version=$( awk '{ print $3 }' /proc/version ) CPU=$( awk '/model name/ {print $4}' < /proc/cpuinfo ) if [ $CPU = Pentium ] then run_some_commands ... else run_different_commands ... fi

The /proc directory contains subdirectories with unusual numerical names. Every one of these names maps to the process ID of a currently running process. Within each of these subdirectories, there are a number of files that hold useful information about the corresponding process. The stat and status files keep running statistics on the process, the cmdline file holds the commandline arguments the process was invoked with, and the exe file is a symbolic link to the complete path name of the invoking process. There are a few more such files, but these seem to be the most interesting from a scripting standpoint. Chapter 28. /dev and /proc 316

Advanced BashScripting Guide Example 281. Finding the process associated with a PID
#!/bin/bash # pididentifier.sh: Gives complete path name to process associated with pid. ARGNO=1 # Number of arguments the script expects. E_WRONGARGS=65 E_BADPID=66 E_NOSUCHPROCESS=67 E_NOPERMISSION=68 PROCFILE=exe if [ $# ne $ARGNO ] then echo "Usage: `basename $0` PIDnumber" >&2 exit $E_WRONGARGS fi

# Error message >stderr.

pidno=$( ps ax | grep $1 | awk '{ print $1 }' | grep $1 ) # Checks for pid in "ps" listing, field #1. # Then makes sure it is the actual process, not the process invoked by this script. # The last "grep $1" filters out this possibility. if [ z "$pidno" ] # If, after all the filtering, the result is a zerolength string, then # no running process corresponds to the pid given. echo "No such process running." exit $E_NOSUCHPROCESS fi # Alternatively: # if ! ps $1 > /dev/null 2>&1 # then # no running process corresponds to the pid given. # echo "No such process running." # exit $E_NOSUCHPROCESS # fi # To simplify the entire process, use "pidof".

if [ ! then echo echo exit fi

r "/proc/$1/$PROCFILE" ]

# Check for read permission.

"Process $1 running, but..." "Can't get read permission on /proc/$1/$PROCFILE." $E_NOPERMISSION # Ordinary user can't access some files in /proc.

# The last two tests may be replaced by: # if ! kill 0 $1 > /dev/null 2>&1 # '0' is not a signal, but # this will test whether it is possible # to send a signal to the process. # then echo "PID doesn't exist or you're not its owner" >&2 # exit $E_BADPID # fi

exe_file=$( ls l /proc/$1 | grep "exe" | awk '{ print $11 }' ) # Or exe_file=$( ls l /proc/$1/exe | awk '{print $11}' ) # # /proc/pidnumber/exe is a symbolic link # to the complete path name of the invoking process. if [ e "$exe_file" ] # If /proc/pidnumber/exe exists...

Chapter 28. /dev and /proc

317

Advanced BashScripting Guide

then # the corresponding process exists. echo "Process #$1 invoked by $exe_file." else echo "No such process running." fi

# # # # # # # # #

This elaborate script can *almost* be replaced by ps ax | grep $1 | awk '{ print $5 }' However, this will not work... because the fifth field of 'ps' is argv[0] of the process, not the executable file path. However, either of the following would work. find /proc/$1/exe printf '%l\n' lsof aFn p $1 d txt | sed ne 's/^n//p'

# Additional commentary by Stephane Chazelas. exit 0

Example 282. Online connect status

#!/bin/bash PROCNAME=pppd PROCFILENAME=status NOTCONNECTED=65 INTERVAL=2 # ppp daemon # Where to look. # Update every 2 seconds.

pidno=$( ps ax | grep v "ps ax" | grep v grep | grep $PROCNAME | awk '{ print $1 }' ) # Finding the process number of 'pppd', the 'ppp daemon'. # Have to filter out the process lines generated by the search itself. # # However, as Oleg Philon points out, #+ this could have been considerably simplified by using "pidof". # pidno=$( pidof $PROCNAME ) # # Moral of the story: #+ When a command sequence gets too complex, look for a shortcut.

if [ z "$pidno" ] # If no pid, then process is not running. then echo "Not connected." exit $NOTCONNECTED else echo "Connected."; echo fi while [ true ] do # Endless loop, script can be improved here.

if [ ! e "/proc/$pidno/$PROCFILENAME" ] # While process running, then "status" file exists. then echo "Disconnected." exit $NOTCONNECTED fi

Chapter 28. /dev and /proc

318

Advanced BashScripting Guide

netstat s | grep "packets received" # Get some connect statistics. netstat s | grep "packets delivered"

sleep $INTERVAL echo; echo done exit 0 # As it stands, this script must be terminated with a ControlC. # # # # Exercises: Improve the script so it exits on a "q" keystroke. Make the script more userfriendly in other ways.

In general, it is dangerous to write to the files in /proc, as this can corrupt the filesystem or crash the machine.

Chapter 28. /dev and /proc

319

Chapter 29. Of Zeros and Nulls

/dev/zero and /dev/null Uses of /dev/null Think of /dev/null as a "black hole". It is the nearest equivalent to a writeonly file. Everything written to it disappears forever. Attempts to read or output from it result in nothing. Nevertheless, /dev/null can be quite useful from both the command line and in scripts. Suppressing stdout.
cat $filename >/dev/null # Contents of the file will not list to stdout.

Suppressing stderr (from Example 122).

rm $badname 2>/dev/null # So error messages [stderr] deepsixed.

Suppressing output from both stdout and stderr.

cat $filename 2>/dev/null >/dev/null # If "$filename" does not exist, there will be no error message output. # If "$filename" does exist, the contents of the file will not list to stdout. # Therefore, no output at all will result from the above line of code. # # This can be useful in situations where the return code from a command #+ needs to be tested, but no output is desired. # # cat $filename &>/dev/null # also works, as Baris Cicek points out.

Deleting contents of a file, but preserving the file itself, with all attendant permissions (from Example 21 and Example 22):
cat /dev/null > /var/log/messages # : > /var/log/messages has same effect, but does not spawn a new process. cat /dev/null > /var/log/wtmp

Automatically emptying the contents of a logfile (especially good for dealing with those nasty "cookies" sent by Web commercial sites):

Example 291. Hiding the cookie jar

if [ f ~/.netscape/cookies ] then rm f ~/.netscape/cookies fi # Remove, if exists.

ln s /dev/null ~/.netscape/cookies

Chapter 29. Of Zeros and Nulls

320

Advanced BashScripting Guide

# All cookies now get sent to a black hole, rather than saved to disk.

Uses of /dev/zero Like /dev/null, /dev/zero is a pseudo file, but it actually contains nulls (numerical zeros, not the ASCII kind). Output written to it disappears, and it is fairly difficult to actually read the nulls in /dev/zero, though it can be done with od or a hex editor. The chief use for /dev/zero is in creating an initialized dummy file of specified length intended as a temporary swap file.

Example 292. Setting up a swapfile using /dev/zero

#!/bin/bash # Creating a swapfile. # This script must be run as root. ROOT_UID=0 E_WRONG_USER=65 FILE=/swap BLOCKSIZE=1024 MINBLOCKS=40 SUCCESS=0 if [ "$UID" ne "$ROOT_UID" ] then echo; echo "You must be root to run this script."; echo exit $E_WRONG_USER fi # Root has $UID 0. # Not root?

blocks=${1:$MINBLOCKS} # # # # # # # # #

# Set to default of 40 blocks, #+ if nothing specified on command line. This is the equivalent of the command block below. if [ n "$1" ] then blocks=$1 else blocks=$MINBLOCKS fi

if [ "$blocks" lt $MINBLOCKS ] then blocks=$MINBLOCKS fi

# Must be at least 40 blocks long.

echo "Creating swap file of size $blocks blocks (KB)." dd if=/dev/zero of=$FILE bs=$BLOCKSIZE count=$blocks # Zero out file. mkswap $FILE $blocks swapon $FILE # Designate it a swap file. # Activate swap file.

echo "Swap file created and activated." exit $SUCCESS

Chapter 29. Of Zeros and Nulls

321

Advanced BashScripting Guide Another application of /dev/zero is to "zero out" a file of a designated size for a special purpose, such as mounting a filesystem on a loopback device (see Example 136) or securely deleting a file (see Example 1242).

Example 293. Creating a ramdisk

#!/bin/bash # ramdisk.sh # #+ # # # # # # #+ A "ramdisk" is a segment of system RAM memory that acts as if it were a filesystem. Its advantage is very fast access (read/write time). Disadvantages: volatility, loss of data on reboot or powerdown. less RAM available to system. What good is a ramdisk? Keeping a large dataset, such as a table or dictionary on ramdisk speeds up data lookup, since memory access is much faster than disk access.

E_NON_ROOT_USER=70 ROOTUSER_NAME=root MOUNTPT=/mnt/ramdisk SIZE=2000 BLOCKSIZE=1024 DEVICE=/dev/ram0

# Must run as root.

# 2K blocks (change as appropriate) # 1K (1024 byte) block size # First ram device

username=`id nu` if [ "$username" != "$ROOTUSER_NAME" ] then echo "Must be root to run \"`basename $0`\"." exit $E_NON_ROOT_USER fi if [ ! d "$MOUNTPT" ] then mkdir $MOUNTPT fi # Test whether mount point already there, #+ so no error if this script is run #+ multiple times.

dd if=/dev/zero of=$DEVICE count=$SIZE bs=$BLOCKSIZE # Zero out RAM device. mke2fs $DEVICE # Create an ext2 filesystem on it. mount $DEVICE $MOUNTPT # Mount it. chmod 777 $MOUNTPT # So ordinary user can access ramdisk. # However, must be root to unmount it. echo "\"$MOUNTPT\" now available for use." # The ramdisk is now accessible for storing files, even by an ordinary user. # Caution, the ramdisk is volatile, and its contents will disappear #+ on reboot or power loss. # Copy anything you want saved to a regular directory. # After reboot, run this script again to set up ramdisk. # Remounting /mnt/ramdisk without the other steps will not work. exit 0

Chapter 29. Of Zeros and Nulls

322

Chapter 30. Debugging

The Bash shell contains no debugger, nor even any debuggingspecific commands or constructs. [60] Syntax errors or outright typos in the script generate cryptic error messages that are often of no help in debugging a nonfunctional script.

Example 301. A buggy script

#!/bin/bash # ex74.sh # This is a buggy script. a=37 if [$a gt 27 ] then echo $a fi exit 0

Output from script:

./ex74.sh: [37: command not found

What's wrong with the above script (hint: after the if)? Example 302. Missing keyword
#!/bin/bash # missingkeyword.sh: What error message will this generate? for a in 1 2 3 do echo "$a" # done # Required keyword 'done' commented out in line 7. exit 0

Output from script:

missingkeyword.sh: line 10: syntax error: unexpected end of file

Note that the error message does not necessarily reference the line in which the error occurs, but the line where the Bash interpreter finally becomes aware of the error. Error messages may disregard comment lines in a script when reporting the line number of a syntax error. What if the script executes, but does not work as expected? This is the all too familiar logic error.

Chapter 30. Debugging

323

Advanced BashScripting Guide Example 303. test24, another buggy script

#!/bin/bash # This is supposed to delete all filenames in current directory #+ containing embedded spaces. # It doesn't work. Why not?

badname=`ls | grep ' '` # echo "$badname" rm "$badname" exit 0

Try to find out what's wrong with Example 303 by uncommenting the echo "$badname" line. Echo statements are useful for seeing whether what you expect is actually what you get. In this particular case, rm "$badname" will not give the desired results because $badname should not be quoted. Placing it in quotes ensures that rm has only one argument (it will match only one filename). A partial fix is to remove to quotes from $badname and to reset $IFS to contain only a newline, IFS=$'\n'. However, there are simpler ways of going about it.
# Correct methods of deleting filenames containing spaces. rm *\ * rm *" "* rm *' '* # Thank you. S.C.

Summarizing the symptoms of a buggy script, 1. It bombs with a "syntax error" message, or 2. It runs, but does not work as expected (logic error). 3. It runs, works as expected, but has nasty side effects (logic bomb). Tools for debugging nonworking scripts include 1. echo statements at critical points in the script to trace the variables, and otherwise give a snapshot of what is going on. 2. using the tee filter to check processes or data flows at critical points. 3. setting option flags n v x sh n scriptname checks for syntax errors without actually running the script. This is the equivalent of inserting set n or set o noexec into the script. Note that certain types of syntax errors can slip past this check. sh v scriptname echoes each command before executing it. This is the equivalent of inserting set v or set o verbose in the script. The n and v flags work well together. sh nv scriptname gives a verbose syntax check.

Chapter 30. Debugging

324

Advanced BashScripting Guide sh x scriptname echoes the result each command, but in an abbreviated manner. This is the equivalent of inserting set x or set o xtrace in the script. Inserting set u or set o nounset in the script runs it, but gives an unbound variable error message at each attempt to use an undeclared variable. 4. Using an "assert" function to test a variable or condition at critical points in a script. (This is an idea borrowed from C.) Example 304. Testing a condition with an "assert"
#!/bin/bash # assert.sh assert () { E_PARAM_ERR=98 E_ASSERT_FAILED=99 # If condition false, #+ exit from script with error message.

if [ z "$2" ] then return $E_PARAM_ERR fi lineno=$2

# Not enough parameters passed. # No damage done.

if [ ! $1 ] then echo "Assertion failed: \"$1\"" echo "File \"$0\", line $lineno" exit $E_ASSERT_FAILED # else # return # and continue executing script. fi }

a=5 b=4 condition="$a lt $b"

# Error message and exit from script. # Try setting "condition" to something else, #+ and see what happens.

assert "$condition" $LINENO # The remainder of the script executes only if the "assert" does not fail.

# Some commands. # ... echo "This statement echoes only if the \"assert\" does not fail." # ... # Some more commands. exit 0

5. trapping at exit. The exit command in a script triggers a signal 0, terminating the process, that is, the script itself. [61] It is often useful to trap the exit, forcing a "printout" of variables, for example. The trap must be the Chapter 30. Debugging 325

Advanced BashScripting Guide first command in the script. Trapping signals trap Specifies an action on receipt of a signal; also useful for debugging. A signal is simply a message sent to a process, either by the kernel or another process, telling it to take some specified action (usually to terminate). For example, hitting a ControlC, sends a user interrupt, an INT signal, to a running program.
trap '' 2 # Ignore interrupt 2 (ControlC), with no action specified. trap 'echo "ControlC disabled."' 2 # Message when ControlC pressed.

Example 305. Trapping at exit

#!/bin/bash trap 'echo Variable Listing a = $a b = $b' EXIT # EXIT is the name of the signal generated upon exit from a script. a=39 b=36 exit 0 # Note that commenting out the 'exit' command makes no difference, #+ since the script exits in any case after running out of commands.

Example 306. Cleaning up after ControlC

#!/bin/bash # logon.sh: A quick 'n dirty script to check whether you are online yet.

TRUE=1 LOGFILE=/var/log/messages # Note that $LOGFILE must be readable (chmod 644 /var/log/messages). TEMPFILE=temp.$$ # Create a "unique" temp file name, using process id of the script. KEYWORD=address # At logon, the line "remote IP address xxx.xxx.xxx.xxx" # appended to /var/log/messages. ONLINE=22 USER_INTERRUPT=13 CHECK_LINES=100 # How many lines in log file to check. trap 'rm f $TEMPFILE; exit $USER_INTERRUPT' TERM INT # Cleans up the temp file if script interrupted by controlc. echo

Chapter 30. Debugging

326

Advanced BashScripting Guide

while [ $TRUE ] #Endless loop. do tail $CHECK_LINES $LOGFILE> $TEMPFILE # Saves last 100 lines of system log file as temp file. # Necessary, since newer kernels generate many log messages at log on. search=`grep $KEYWORD $TEMPFILE` # Checks for presence of the "IP address" phrase, # indicating a successful logon. if [ ! z "$search" ] # Quotes necessary because of possible spaces. then echo "Online" rm f $TEMPFILE # Clean up temp file. exit $ONLINE else echo n "." # n option to echo suppresses newline, # so you get continuous rows of dots. fi sleep 1 done

# Note: if you change the KEYWORD variable to "Exit", # this script can be used while online to check for an unexpected logoff. # Exercise: Change the script, as per the above note, # and prettify it. exit 0

# Nick Drage suggests an alternate method: while true do ifconfig ppp0 | grep UP 1> /dev/null && echo "connected" && exit 0 echo n "." # Prints dots (.....) until connected. sleep 2 done # Problem: Hitting ControlC to terminate this process may be insufficient. # (Dots may keep on echoing.) # Exercise: Fix this.

# Stephane Chazelas has yet another alternative: CHECK_INTERVAL=1 while ! tail 1 "$LOGFILE" | grep q "$KEYWORD" do echo n . sleep $CHECK_INTERVAL done echo "Online" # Exercise: Discuss the strengths and weaknesses # of each of these various approaches.

Chapter 30. Debugging

327

Advanced BashScripting Guide The DEBUG argument to trap causes a specified action to execute after every command in a script. This permits tracing variables, for example. Example 307. Tracing a variable
#!/bin/bash trap 'echo "VARIABLETRACE> \$variable = \"$variable\""' DEBUG # Echoes the value of $variable after every command. variable=29 echo "Just initialized \"\$variable\" to $variable." let "variable *= 3" echo "Just multiplied \"\$variable\" by 3." # # # # The "trap 'commands' DEBUG" construct would be more useful in the context of a complex script, where placing multiple "echo $variable" statements might be clumsy and timeconsuming.

# Thanks, Stephane Chazelas for the pointer. exit 0

trap '' SIGNAL (two adjacent apostrophes) disables SIGNAL for the remainder of the script. trap SIGNAL restores the functioning of SIGNAL once more. This is useful to protect a critical portion of a script from an undesirable interrupt.
trap '' 2 command command command trap 2 # Signal 2 is ControlC, now disabled.

# Reenables ControlC

Chapter 30. Debugging

328

Chapter 31. Options

Options are settings that change shell and/or script behavior. The set command enables options within a script. At the point in the script where you want the options to take effect, use set o optionname or, in short form, set optionabbrev. These two forms are equivalent.
#!/bin/bash set o verbose # Echoes all commands before executing.

#!/bin/bash set v # Exact same effect as above.

To disable an option within a script, use set +o optionname or set +optionabbrev.

#!/bin/bash set o verbose # Command echoing on. command ... command set +o verbose # Command echoing off. command # Not echoed.

set v # Command echoing on. command ... command set +v # Command echoing off. command exit 0

An alternate method of enabling options in a script is to specify them immediately following the #! script header.
#!/bin/bash x # # Body of script follows.

Chapter 31. Options

329

Advanced BashScripting Guide It is also possible to enable script options from the command line. Some options that will not work with set are available this way. Among these are i, force script to run interactive. bash v scriptname bash o verbose scriptname The following is a listing of some useful options. They may be specified in either abbreviated form or by complete name.

Table 311. Bash options Abbreviation C D a b c ... f i p r u v x e n s t Name noclobber (none) allexport notify (none) noglob interactive privileged restricted nounset verbose xtrace errexit noexec stdin (none) (none) (none) Effect Prevent overwriting of files by redirection (may be overridden by >|) List doublequoted strings prefixed by $, but do not execute commands in script Export all defined variables Notify when jobs running in background terminate (not of much use in a script) Read commands from ... Filename expansion (globbing) disabled Script runs in interactive mode Script runs as "suid" (caution!) Script runs in restricted mode (see Chapter 21). Attempt to use undefined variable outputs error message, and forces an exit Print each command to stdout before executing it Similar to v, but expands commands Abort script at first error (when a command exits with nonzero status) Read commands in script, but do not execute them (syntax check) Read commands from stdin Exit after first command End of options flag. All other arguments are positional parameters. Unset positional parameters. If arguments given ( arg1 arg2), positional parameters set to arguments.

Chapter 31. Options

330

Chapter 32. Gotchas

Turandot: Gli enigmi sono tre, la morte una! Caleph: No, no! Gli enigmi sono tre, una la vita! Puccini Assigning reserved words or characters to variable names.
case=value0 # Causes problems. 23skidoo=value1 # Also problems. # Variable names starting with a digit are reserved by the shell. # Try _23skidoo=value1. Starting variables with an underscore is o.k. # However... _=25 echo $_ xyz((!*=value2 using just the underscore will not work. # $_ is a special variable set to last arg of last command. # Causes severe problems.

Using a hyphen or other reserved characters in a variable name.

var1=23 # Use 'var_1' instead.

Using the same name for a variable and a function. This can make a script difficult to understand.
do_something () { echo "This function does something with \"$1\"." } do_something=do_something do_something do_something # All this is legal, but highly confusing.

Using whitespace inappropriately. In contrast to other programming languages, Bash can be quite finicky about whitespace.
var1 = 23 # 'var1=23' is correct. # On line above, Bash attempts to execute command "var1" # with the arguments "=" and "23". let c = $a $b # 'let c=$a$b' or 'let "c = $a $b"' are correct.

if [ $a le 5] # if [ $a le 5 ] is correct. # if [ "$a" le 5 ] is even better. # [[ $a le 5 ]] also works.

Assuming uninitialized variables (variables before a value is assigned to them) are "zeroed out". An uninitialized variable has a value of "null", not zero.
#!/bin/bash

Chapter 32. Gotchas

331

Advanced BashScripting Guide

echo "uninitialized_var = $uninitialized_var" # uninitialized_var =

Mixing up = and eq in a test. Remember, = is for comparing literal variables and eq for integers.
if [ "$a" = 273 ] if [ "$a" eq 273 ] # Is $a an integer or string? # If $a is an integer.

# Sometimes you can mix up eq and = without adverse consequences. # However...

a=273.0

# Not an integer.

if [ "$a" = 273 ] then echo "Comparison works." else echo "Comparison does not work." fi # Comparison does not work. # Same with a=" 273" and a="0273".

# Likewise, problems trying to use "eq" with noninteger values. if [ "$a" eq 273.0 ] then echo "a = $a' fi # Aborts with an error message. # test.sh: [: 273.0: integer expression expected

Mixing up integer and string comparison operators.

#!/bin/bash # badop.sh number=1 while [ "$number" < 5 ] do echo n "$number " let "number += 1" done # Wrong! Should be while [ "number" lt 5 ]

# Attempt to run this bombs with the error message: # badop.sh: 5: No such file or directory

Sometimes variables within "test" brackets ([ ]) need to be quoted (double quotes). Failure to do so may cause unexpected behavior. See Example 76, Example 164, and Example 96. Commands issued from a script may fail to execute because the script owner lacks execute permission for them. If a user cannot invoke a command from the command line, then putting it into a script will likewise fail. Try changing the attributes of the command in question, perhaps even setting the suid bit (as root, of course). Attempting to use as a redirection operator (which it is not) will usually result in an unpleasant surprise. Chapter 32. Gotchas 332

Advanced BashScripting Guide

command1 2> | command2 # ...will not work. command1 2>& | command2 Thanks, S.C. # Trying to redirect error output of command1 into a pipe...

# Also futile.

Using Bash version 2+ functionality may cause a bailout with error messages. Older Linux machines may have version 1.XX of Bash as the default installation.
#!/bin/bash minimum_version=2 # Since Chet Ramey is constantly adding features to Bash, # you may set $minimum_version to 2.XX, or whatever is appropriate. E_BAD_VERSION=80 if [ "$BASH_VERSION" \< "$minimum_version" ] then echo "This script works only with Bash, version $minimum or greater." echo "Upgrade strongly recommended." exit $E_BAD_VERSION fi ...

Using Bashspecific functionality in a Bourne shell script (#!/bin/sh) on a nonLinux machine may cause unexpected behavior. A Linux system usually aliases sh to bash, but this does not necessarily hold true for a generic UNIX machine. A script with DOStype newlines (\r\n) will fail to execute, since #!/bin/bash\r\n is not recognized, not the same as the expected #!/bin/bash\n. The fix is to convert the script to UNIXstyle newlines.
#!/bin/bash echo "Here" unix2dos $0 chmod 755 $0 # Script changes itself to DOS format. # Change back to execute permission. # The 'unix2dos' command removes execute permission. # Script tries to run itself again. # But it won't work as a DOS file.

./$0

echo "There" exit 0

A shell script headed by #!/bin/sh may not run in full Bashcompatibility mode. Some Bashspecific functions might be disabled. Scripts that need complete access to all the Bashspecific extensions should start with #!/bin/bash. Putting whitespace in front of the terminating limit string of a here document will cause unexpected behavior in a script. A script may not export variables back to its parent process, the shell, or to the environment. Just as we Chapter 32. Gotchas 333

Advanced BashScripting Guide learned in biology, a child process can inherit from a parent, but not vice versa.
WHATEVER=/home/bozo export WHATEVER exit 0 bash$ echo $WHATEVER bash$

Sure enough, back at the command prompt, $WHATEVER remains unset. Setting and manipulating variables in a subshell, then attempting to use those same variables outside the scope of the subshell will result an unpleasant surprise.

Example 321. Subshell Pitfalls

#!/bin/bash # Pitfalls of variables in a subshell. outer_variable=outer echo echo "outer_variable = $outer_variable" echo ( # Begin subshell echo "outer_variable inside subshell = $outer_variable" inner_variable=inner # Set echo "inner_variable inside subshell = $inner_variable" outer_variable=inner # Will value change globally? echo "outer_variable inside subshell = $outer_variable" # End subshell ) echo echo "inner_variable outside subshell = $inner_variable" echo "outer_variable outside subshell = $outer_variable" echo exit 0

# Unset. # Unchanged.

Piping echooutput to a read may produce unexpected results. In this scenario, the read acts as if it were running in a subshell. Instead, use the set command (as in Example 1114).

Example 322. Piping the output of echo to a read

#!/bin/bash # badread.sh: # Attempting to use 'echo and 'read' #+ to assign variables noninteractively.

Chapter 32. Gotchas

334

Advanced BashScripting Guide

a=aaa b=bbb c=ccc echo "one two three" | read a b c # Try to reassign a, b, and c. echo echo "a = $a" echo "b = $b" echo "c = $c" # Reassignment

# a = aaa # b = bbb # c = ccc failed.

# # Try the following alternative. var=`echo "one two three"` set $var a=$1; b=$2; c=$3 echo "" echo "a = $a" echo "b = $b" echo "c = $c" # Reassignment

# a = one # b = two # c = three succeeded.

# # # Note also that an echo to a 'read' works within a subshell. However, the value of the variable changes *only* within the subshell. # Starting all over again.

a=aaa b=bbb c=ccc

echo; echo echo "one two three" | ( read a b c; echo "Inside subshell: "; echo "a = $a"; echo "b = $b"; echo "c = $c" ) # a = one # b = two # c = three echo "" echo "Outside subshell: " echo "a = $a" # a = aaa echo "b = $b" # b = bbb echo "c = $c" # c = ccc echo exit 0

Using "suid" commands within scripts is risky, as it may compromise system security. [62] Using shell scripts for CGI programming may be problematic. Shell script variables are not "typesafe", and this can cause undesirable behavior as far as CGI is concerned. Moreover, it is difficult to "crackerproof" shell scripts. Bash does not handle the double slash (//) string correctly.

Chapter 32. Gotchas

335

Advanced BashScripting Guide Bash scripts written for Linux or BSD systems may need fixups to run on a commercial UNIX machine. Such scripts often employ GNU commands and filters which have greater functionality than their generic UNIX counterparts. This is particularly true of such text processing utilites as tr. Danger is near thee Beware, beware, beware, beware. Many brave hearts are asleep in the deep. So beware Beware. A.J. Lamb and H.W. Petrie

Chapter 32. Gotchas

336

Chapter 33. Scripting With Style

Get into the habit of writing shell scripts in a structured and systematic manner. Even "onthefly" and "written on the back of an envelope" scripts will benefit if you take a few minutes to plan and organize your thoughts before sitting down and coding. Herewith are a few stylistic guidelines. This is not intended as an Official Shell Scripting Stylesheet.

33.1. Unofficial Shell Scripting Stylesheet

Comment your code. This makes it easier for others to understand (and appreciate), and easier for you to maintain.
PASS="$PASS${MATRIX:$(($RANDOM%${#MATRIX})):1}" # It made perfect sense when you wrote it last year, but now it's a complete mystery. # (From Antek Sawicki's "pw.sh" script.)

Add descriptive headers to your scripts and functions.

#!/bin/bash #************************************************# # xyz.sh # # written by Bozo Bozeman # # July 05, 2001 # # # # Clean up project files. # #************************************************# BADDIR=65 projectdir=/home/bozo/projects # No such directory. # Directory to clean up. # # # # # #

# # cleanup_pfiles () # Removes all files in designated directory. # Parameter: $target_directory # Returns: 0 on success, $BADDIR if something went wrong. # cleanup_pfiles () { if [ ! d "$1" ] # Test if target directory exists. then echo "$1 is not a directory." return $BADDIR fi rm f "$1"/* return 0 # Success. } cleanup_pfiles $projectdir exit 0

Be sure to put the #!/bin/bash at the beginning of the first line of the script, preceding any comment headers. Avoid using "magic numbers", [63] that is, "hardwired" literal constants. Use meaningful variable Chapter 33. Scripting With Style 337

Advanced BashScripting Guide names instead. This makes the script easier to understand and permits making changes and updates without breaking the application.
if [ f /var/log/messages ] then ... fi # A year later, you decide to change the script to check /var/log/syslog. # It is now necessary to manually change the script, instance by instance, # and hope nothing breaks. # A better way: LOGFILE=/var/log/messages if [ f "$LOGFILE" ] then ... fi

# Only line that needs to be changed.

Choose descriptive names for variables and functions.

fl=`ls al $dirname` file_listing=`ls al $dirname` # Cryptic. # Better.

MAXVAL=10 # All caps used for a script constant. while [ "$index" le "$MAXVAL" ] ...

E_NOTFOUND=75 if [ ! e "$filename" ] then echo "File $filename not found." exit $E_NOTFOUND fi

# Uppercase for an errorcode, # and name begins with "E_".

MAIL_DIRECTORY=/var/spool/mail/bozo export MAIL_DIRECTORY

# Uppercase for an environmental variable.

GetAnswer () { prompt=$1 echo n $prompt read answer return $answer }

# Mixed case works well for a function.

GetAnswer "What is your favorite number? " favorite_number=$? echo $favorite_number

_uservariable=23 # Permissable, but not recommended. # It's better for userdefined variables not to start with an underscore. # Leave that for system variables.

Use exit codes in a systematic and meaningful way.

E_WRONG_ARGS=65 ... ... exit $E_WRONG_ARGS

Chapter 33. Scripting With Style

338

Advanced BashScripting Guide See also Appendix D. Break complex scripts into simpler modules. Use functions where appropriate. See Example 354. Don't use a complex construct where a simpler one will do.
COMMAND if [ $? eq 0 ] ... # Redundant and nonintuitive. if COMMAND ... # More concise (if perhaps not quite as legible).

... reading the UNIX source code to the Bourne shell (/bin/sh). I was shocked at how much simple algorithms could be made cryptic, and therefore useless, by a poor choice of code style. I asked myself, "Could someone be proud of this code?" Landon Noll

Chapter 33. Scripting With Style

339

Chapter 34. Miscellany

Nobody really knows what the Bourne shell's grammar is. Even examination of the source code is little help. Tom Duff

34.1. Interactive and noninteractive shells and scripts

An interactive shell reads commands from user input on a tty. Among other things, such a shell reads startup files on activation, displays a prompt, and enables job control by default. The user can interact with the shell. A shell running a script is always a noninteractive shell. All the same, the script can still access its tty. It is even possible to emulate an interactive shell in a script.
#!/bin/bash MY_PROMPT='$ ' while : do echo n "$MY_PROMPT" read line eval "$line" done exit 0 # This example script, and much of the above explanation supplied by # Stephane Chazelas (thanks again).

Let us consider an interactive script to be one that requires input from the user, usually with read statements (see Example 112). "Real life" is actually a bit messier than that. For now, assume an interactive script is bound to a tty, a script that a user has invoked from the console or an xterm. Init and startup scripts are necessarily noninteractive, since they must run without human intervention. Many administrative and system maintenance scripts are likewise noninteractive. Unvarying repetitive tasks cry out for automation by noninteractive scripts. Noninteractive scripts can run in the background, but interactive ones hang, waiting for input that never comes. Handle that difficulty by having an expect script or embedded here document feed input to an interactive script running as a background job. In the simplest case, redirect a file to supply input to a read statement (read variable <file). These particular workarounds make possible general purpose scripts that run in either interactive or noninteractive modes. If a script needs to test whether it is running in an interactive shell, it is simply a matter of finding whether the prompt variable, $PS1 is set. (If the user is being prompted for input, then the script needs to display a prompt.)
if [ z $PS1 ] # no prompt? then # noninteractive ... else

Chapter 34. Miscellany

340

Advanced BashScripting Guide

# interactive ... fi

Alternatively, the script can test for the presence of option "i" in the $ flag.
case $ in *i*) # interactive shell ;; *) # noninteractive shell ;; # (Courtesy of "UNIX F.A.Q.," 1993)

Scripts may be forced to run in interactive mode with the i option or with a #!/bin/bash i header. Be aware that this can cause erratic script behavior or show error messages even when no error is present.

34.2. Shell Wrappers

A "wrapper" is a shell script that embeds a system command or utility, that saves a set of parameters passed to that command. Wrapping a script around a complex command line simplifies invoking it. This is expecially useful with sed and awk. A sed or awk script would normally be invoked from the command line by a sed e 'commands' or awk 'commands'. Embedding such a script in a Bash script permits calling it more simply, and makes it "reusable". This also enables combining the functionality of sed and awk, for example piping the output of a set of sed commands to awk. As a saved executable file, you can then repeatedly invoke it in its original form or modified, without the inconvenience of retyping it on the command line.

Example 341. shell wrapper

#!/bin/bash # # # # # # # # # This is a simple script that removes blank lines from a file. No argument checking. You might wish to add something like: if [ z "$1" ] then echo "Usage: `basename $0` targetfile" exit 65 fi

# Same as # sed e '/^$/d' filename # invoked from the command line. sed e /^$/d "$1" # The 'e' means an "editing" command follows (optional here). # '^' is the beginning of line, '$' is the end. # This match lines with nothing between the beginning and the end, #+ blank lines.

Chapter 34. Miscellany

341

Advanced BashScripting Guide

# The 'd' is the delete command.

# Quoting the commandline arg permits #+ whitespace and special characters in the filename. exit 0

Example 342. A slightly more complex shell wrapper

#!/bin/bash # "subst", a script that substitutes one pattern for # another in a file, # i.e., "subst Smith Jones letter.txt". ARGS=3 E_BADARGS=65

# Wrong number of arguments passed to script.

if [ $# ne "$ARGS" ] # Test number of arguments to script (always a good idea). then echo "Usage: `basename $0` oldpattern newpattern filename" exit $E_BADARGS fi old_pattern=$1 new_pattern=$2 if [ f "$3" ] then file_name=$3 else echo "File \"$3\" does not exist." exit $E_BADARGS fi # Here is where the heavy work gets done. sed e "s/$old_pattern/$new_pattern/g" $file_name # 's' is, of course, the substitute command in sed, # and /pattern/ invokes address matching. # The "g", or global flag causes substitution for *every* # occurence of $old_pattern on each line, not just the first. # Read the literature on 'sed' for a more indepth explanation. exit 0 # Successful invocation of the script returns 0.

Example 343. A shell wrapper around an awk script

#!/bin/bash # Adds up a specified column (of numbers) in the target file. ARGS=2 E_WRONGARGS=65 if [ $# ne "$ARGS" ] # Check for proper no. of command line args. then echo "Usage: `basename $0` filename columnnumber"

Chapter 34. Miscellany

342

Advanced BashScripting Guide

exit $E_WRONGARGS fi filename=$1 column_number=$2 # Passing shell variables to the awk part of the script is a bit tricky. # See the awk documentation for more details. # A multiline awk script is invoked by awk ' ..... '

# Begin awk script. # awk ' { total += $'"${column_number}"' } END { print total } ' "$filename" # # End awk script.

# # # # # # # # # #

It may not be safe to pass shell variables to an embedded awk script, so Stephane Chazelas proposes the following alternative: awk v column_number="$column_number" ' { total += $column_number } END { print total }' "$filename"

exit 0

For those scripts needing a single doitall tool, a Swiss army knife, there is Perl. Perl combines the capabilities of sed and awk, and throws in a large subset of C, to boot. It is modular and contains support for everything ranging from objectoriented programming up to and including the kitchen sink. Short Perl scripts lend themselves to embedding in shell scripts, and there may even be some substance to the claim that Perl can totally replace shell scripting (though the author of this document remains skeptical).

Example 344. Perl embedded in a Bash script

#!/bin/bash # Shell commands may precede the Perl script. echo "This precedes the embedded Perl script within \"$0\"." echo "===============================================================" perl e 'print "This is an embedded Perl script.\n";' # Like sed, Perl also uses the "e" option. echo "==============================================================="

Chapter 34. Miscellany

343

Advanced BashScripting Guide

echo "However, the script may also contain shell and system commands." exit 0

It is even possible to combine a Bash script and Perl script within the same file. Depending on how the script is invoked, either the Bash part or the Perl part will execute.

Example 345. Bash and Perl scripts combined

#!/bin/bash # bashandperl.sh echo "Greetings from the Bash part of the script." # More Bash commands may follow here. exit 0 # End of Bash part of the script. # ======================================================= #!/usr/bin/perl # This part of the script must be invoked with x option. print "Greetings from the Perl part of the script.\n"; # More Perl commands may follow here. # End of Perl part of the script. bash$ bash bashandperl.sh Greetings from the Bash part of the script.

bash$ perl x bashandperl.sh Greetings from the Perl part of the script.

34.3. Tests and Comparisons: Alternatives

For tests, the [[ ]] construct may be more appropriate than [ ]. Likewise, arithmetic comparisons might benefit from the (( )) construct.
a=8 # All of the comparisons below are equivalent. test "$a" lt 16 && echo "yes, $a < 16" /bin/test "$a" lt 16 && echo "yes, $a < 16" [ "$a" lt 16 ] && echo "yes, $a < 16" [[ $a lt 16 ]] && echo "yes, $a < 16" (( a < 16 )) && echo "yes, $a < 16"

# "and list"

# Quoting variables within # [[ ]] and (( )) not necessary.

city="New York" # Again, all of the comparisons below are equivalent. test "$city" \< Paris && echo "Yes, Paris is greater than $city" # Greater ASCII order. /bin/test "$city" \< Paris && echo "Yes, Paris is greater than $city" [ "$city" \< Paris ] && echo "Yes, Paris is greater than $city" [[ $city < Paris ]] && echo "Yes, Paris is greater than $city" # Need not quote $city.

Chapter 34. Miscellany

344

Advanced BashScripting Guide

# Thank you, S.C.

34.4. Recursion
Can a script recursively call itself? Indeed.

Example 346. A (useless) script that recursively calls itself

#!/bin/bash # recurse.sh # # # Can a script recursively call itself? Yes, but is this of any practical use? (See the following.)

RANGE=10 MAXVAL=9 i=$RANDOM let "i %= $RANGE"

# Generate a random number between 0 and $MAXVAL.

if [ "$i" lt "$MAXVAL" ] then echo "i = $i" ./$0 # Script recursively spawns a new instance of itself. fi # Each child script does the same, until #+ a generated $i equals $MAXVAL. # # Using a "while" loop instead of an "if/then" test causes problems. Explain why.

exit 0

Example 347. A (useful) script that recursively calls itself

#!/bin/bash # pb.sh: phone book # Written by Rick Boivie, and used with permission. # Modifications by document author. MINARGS=1 # Script needs at least one argument. DATAFILE=./phonebook PROGNAME=$0 E_NOARGS=70 # No arguments error. if [ $# lt $MINARGS ]; then echo "Usage: "$PROGNAME" data" exit $E_NOARGS fi

if [ $# eq $MINARGS ]; then grep $1 "$DATAFILE" else

Chapter 34. Miscellany

345

Advanced BashScripting Guide

( shift; "$PROGNAME" $* ) | grep $1 # Script recursively calls itself. fi exit 0 # Script exits here. # It's o.k. to put nonhashmarked comments #+ and data after this point.

# # Sample "phonebook" datafile: John Doe 1555 Main St., Baltimore, MD 21228 (410) 2223333 Mary Moe 9899 Jones Blvd., Warren, NH 03787 (603) 8983232 Richard Roe 856 E. 7th St., New York, NY 10009 (212) 3334567 Sam Roe 956 E. 8th St., New York, NY 10009 (212) 4445678 Zoe Zenobia 4481 N. Baker St., San Francisco, SF 94338 (415) 5011631 # $bash pb.sh Roe Richard Roe 856 E. 7th St., New York, NY 10009 Sam Roe 956 E. 8th St., New York, NY 10009 $bash pb.sh Roe Sam Sam Roe 956 E. 8th St., New York, NY 10009 # When more than one argument passed to script, #+ prints *only* the line(s) containing all the arguments.

(212) 3334567 (212) 4445678

(212) 4445678

Too many levels of recursion can exhaust the script's stack space, causing a segfault.

34.5. "Colorizing" Scripts

The ANSI [64] escape sequences set screen attributes, such as bold text, and color of foreground and background. DOS batch files commonly used ANSI escape codes for color output, and so can Bash scripts.

Example 348. A "colorized" address database

#!/bin/bash # ex30a.sh: "Colorized" version of ex30.sh. # Crude address database

clear

# Clear the screen.

echo n " " echo e '\E[37;44m'"\033[1mContact List\033[0m" # White on blue background echo; echo echo e "\033[1mChoose one of the following persons:\033[0m" # Bold tput sgr0 echo "(Enter only the first letter of name.)" echo echo en '\E[47;34m'"\033[1mE\033[0m" # Blue tput sgr0 # Reset colors to "normal." echo "vans, Roland" # "[E]vans, Roland" echo en '\E[47;35m'"\033[1mJ\033[0m" # Magenta

Chapter 34. Miscellany

346

Advanced BashScripting Guide

tput echo echo tput echo echo tput echo echo sgr0 "ones, Mildred" en '\E[47;32m'"\033[1mS\033[0m" sgr0 "mith, Julie" en '\E[47;31m'"\033[1mZ\033[0m" sgr0 "ane, Morris"

# Green

# Red

read person case "$person" in # Note variable is quoted. "E" | "e" ) # Accept upper or lowercase input. echo echo "Roland Evans" echo "4321 Floppy Dr." echo "Hardscrabble, CO 80753" echo "(303) 7349874" echo "(303) 7349892 fax" echo "[email protected]" echo "Business partner & old friend" ;; "J" | "j" ) echo echo "Mildred Jones" echo "249 E. 7th St., Apt. 19" echo "New York, NY 10009" echo "(212) 5332814" echo "(212) 5339972 fax" echo "[email protected]" echo "Girlfriend" echo "Birthday: Feb. 11" ;; # Add info for Smith & Zane later. * ) # Default option. # Empty input (hitting RETURN) fits here, too. echo echo "Not yet in database." ;; esac tput sgr0 echo exit 0 # Reset colors to "normal."

The simplest, and perhaps most useful ANSI escape sequence is bold text, \033[1m ... \033[0m. The \033 represents an escape, the "[1" turns on the bold attribute, while the "[0" switches it off. The "m" terminates each term of the escape sequence.

Chapter 34. Miscellany

347

Advanced BashScripting Guide

bash$ echo e "\033[1mThis is bold text.\033[0m"

A similar escape sequence switches on the underline attribute (on an rxvt and and an aterm).
bash$ echo e "\033[4mThis is underlined text.\033[0m"

With an echo, the e option enables the escape sequences. Other escape sequences change the text and/or background color.
bash$ echo e '\E[34;47mThis prints in blue.'; tput sgr0

bash$ echo e '\E[33;44m'"yellow text on blue background"; tput sgr0

The tput sgr0 restores the terminal settings to normal. Omitting this lets all subsequent output from that particular terminal remain blue.

Use the following template for writing colored text on a colored background. echo e '\E[COLOR1;COLOR2mSome text goes here.' The "\E[" begins the escape sequence. The semicolonseparated numbers "COLOR1" and "COLOR2" specify a foreground and a background color, according to the table below. (The order of the numbers does not matter, since the foreground and background numbers fall in nonoverlapping ranges.) The "m" terminates the escape sequence, and the text begins immediately after that. Note also that single quotes enclose the remainder of the command sequence following the echo e. The numbers in the following table work for an rxvt terminal. Results may vary for other terminal emulators.

Table 341. Numbers representing colors in Escape Sequences Color black red green yellow blue magenta cyan white Foreground 30 31 32 33 34 35 36 37 Background 40 41 42 43 44 45 46 47

Example 349. Echoing colored text Chapter 34. Miscellany 348

Advanced BashScripting Guide

#!/bin/bash # colorecho.sh: Echoing text messages in color. # Modify this script for your own purposes. # It's easier than handcoding color. black='\E[30;47m' red='\E[31;47m' green='\E[32;47m' yellow='\E[33;47m' blue='\E[34;47m' magenta='\E[35;47m' cyan='\E[36;47m' white='\E[37;47m'

alias Reset="tput sgr0"

# Reset text attributes to normal #+ without clearing screen.

cecho ()

# Colorecho. # Argument $1 = message # Argument $2 = color

{ local default_msg="No message passed." # Doesn't really need to be a local variable. message=${1:$default_msg} color=${2:$black} echo e "$color" echo "$message" Reset return } # Defaults to default message. # Defaults to black, if not specified.

# Reset to normal.

# Now, let's try it out. # cecho "Feeling blue..." $blue cecho "Magenta looks more like purple." $magenta cecho "Green with envy." $green cecho "Seeing red?" $red cecho "Cyan, more familiarly known as aqua." $cyan cecho "No color passed (defaults to black)." # Missing $color argument. cecho "\"Empty\" color passed (defaults to black)." "" # Empty $color argument. cecho # Missing $message and $color arguments. cecho "" "" # Empty $message and $color arguments. # echo exit 0 # Exercises: # # 1) Add the "bold" attribute to the 'cecho ()' function.

Chapter 34. Miscellany

349

Advanced BashScripting Guide

# 2) Add options for colored backgrounds.

There is, however, a major problem with all this. ANSI escape sequences are emphatically nonportable. What works fine on some terminal emulators (or the console) may work differently, or not at all, on others. A "colorized" script that looks stunning on the script author's machine may produce unreadable output on someone else's. This greatly compromises the usefulness of "colorizing" scripts, and possibly relegates this technique to the status of a gimmick or even a "toy". Moshe Jacobson's color utility (http://runslinux.net/projects/color) considerably simplifies using ANSI escape sequences. It substitutes a clean and logical syntax for the clumsy constructs just discussed.

34.6. Optimizations
Most shell scripts are quick 'n dirty solutions to noncomplex problems. As such, optimizing them for speed is not much of an issue. Consider the case, though, where a script carries out an important task, does it well, but runs too slowly. Rewriting it in a compiled language may not be a palatable option. The simplest fix would be to rewrite the parts of the script that slow it down. Is it possible to apply principles of code optimization even to a lowly shell script? Check the loops in the script. Time consumed by repetitive operations adds up quickly. If at all possible, remove timeconsuming operations from within loops. Use builtin commands in preference to system commands. Builtins execute faster and usually do not launch a subshell when invoked. Avoid unnecessary commands, particularly in a pipe.
cat "$file" | grep "$word" grep "$word" "$file" # The above command lines have an identical effect, #+ but the second runs faster since it launches one fewer subprocess.

The cat command seems especially prone to overuse in scripts. Use the time and times tools to profile computationintensive commands. Consider rewriting timecritical code sections in C, or even in assembler. Try to minimize file I/O. Bash is not particularly efficient at handling files, so consider using more appropriate tools for this within the script, such as awk or Perl. Write your scripts in a structured, coherent form, so they can be reorganized and tightened up as necessary. Some of the optimization techniques applicable to highlevel languages may work for scripts, but others, such as loop unrolling, are mostly irrelevant. Above all, use common sense. For an excellent demonstration of how optimization can drastically reduce the execution time of a script, see Example 1232.

Chapter 34. Miscellany

350

Advanced BashScripting Guide

34.7. Assorted Tips

To keep a record of which user scripts have run during a particular sesssion or over a number of sessions, add the following lines to each script you want to keep track of. This will keep a continuing file record of the script names and invocation times.
# Append (>>) following to end of each script tracked. date>> $SAVE_FILE echo $0>> $SAVE_FILE echo>> $SAVE_FILE #Date and time. #Script name. #Blank line as separator.

# Of course, SAVE_FILE defined and exported as environmental variable in ~/.bashrc # (something like ~/.scriptsrun)

The >> operator appends lines to a file. What if you wish to prepend a line to an existing file, that is, to paste it in at the beginning?
file=data.txt title="***This is the title line of data text file***" echo $title | cat $file >$file.new # "cat " concatenates stdout to $file. # End result is #+ to write a new file with $title appended at *beginning*.

Of course, sed can also do this. A shell script may act as an embedded command inside another shell script, a Tcl or wish script, or even a Makefile. It can be invoked as an external shell command in a C program using the system() call, i.e., system("script_name");. Put together files containing your favorite and most useful definitions and functions. As necessary, "include" one or more of these "library files" in scripts with either the dot (.) or source command.
# SCRIPT LIBRARY # # Note: # No "#!" here. # No "live code" either.

# Useful variable definitions ROOT_UID=0 E_NOTROOT=101 MAXRETVAL=256 SUCCESS=0 FAILURE=1 # Root has $UID 0. # Not root user error. # Maximum (positive) return value of a function.

# Functions Usage () { if [ z "$1" ] then # "Usage:" message. # No arg passed.

Chapter 34. Miscellany

351

Advanced BashScripting Guide

msg=filename else msg=$@ fi echo "Usage: `basename $0` "$msg"" }

Check_if_root () # Check if root running script. { # From "ex39.sh" example. if [ "$UID" ne "$ROOT_UID" ] then echo "Must be root to run this script." exit $E_NOTROOT fi }

CreateTempfileName () # Creates a "unique" temp filename. { # From "ex51.sh" example. prefix=temp suffix=`eval date +%s` Tempfilename=$prefix.$suffix }

isalpha2 () # Tests whether *entire string* is alphabetic. { # From "isalpha.sh" example. [ $# eq 1 ] || return $FAILURE case $1 in *[!azAZ]*|"") return $FAILURE;; *) return $SUCCESS;; esac # Thanks, S.C. }

abs () { E_ARGERR=999999 if [ z "$1" ] then return $E_ARGERR fi if [ "$1" ge 0 ] then absval=$1 else let "absval = (( 0 $1 ))" fi return $absval }

# Absolute value. # Caution: Max return value = 256.

# Need arg passed. # Obvious error value returned.

# # # # #

If nonnegative, stays asis. Otherwise, change sign.

tolower () { if [ z "$1" ]

# Converts string(s) passed as argument(s) #+ to lowercase. # If no argument(s) passed,

Chapter 34. Miscellany

352

Advanced BashScripting Guide

then echo "(null)" return fi #+ send error message #+ (Cstyle voidpointer error message) #+ and return from function.

echo "$@" | tr AZ az # Translate all passed arguments ($@). return # Use command substitution to set a variable to function output. # For example: # oldvar="A seT of miXedcaSe LEtTerS" # newvar=`tolower "$oldvar"` # echo "$newvar" # a set of mixedcase letters # # Exercise: Rewrite this function to change lowercase passed argument(s) # to uppercase ... toupper() [easy]. }

Use specialpurpose comment headers to increase clarity and legibility in scripts.

## Caution. rm rf *.zzy

## The "rf" options to "rm" are very dangerous, ##+ especially with wildcards.

#+ # #+ #+

Line continuation. This is line 1 of a multiline comment, and this is the final line.

#* Note. #o List item. #> Another point of view. while [ "$var1" != "end" ]

#> while test "$var1" != "end"

A particularly clever use of iftest constructs is commenting out blocks of code.

#!/bin/bash COMMENT_BLOCK= # Try setting the above variable to something or other #+ for an unpleasant surprise. if [ $COMMENT_BLOCK ]; then Comment block ================================= This is a comment line. This is another comment line. This is yet another comment line. ================================= echo "This will not echo." Comment blocks are errorfree! Whee! fi echo "No more comments, please."

Chapter 34. Miscellany

353

Advanced BashScripting Guide

exit 0

Compare this with using here documents to comment out code blocks. Using the $? exit status variable, a script may test if a parameter contains only digits, so it can be treated as an integer.
#!/bin/bash SUCCESS=0 E_BADINPUT=65 test "$1" ne 0 o "$1" eq 0 2>/dev/null # An integer is either equal to 0 or not equal to 0. # 2>/dev/null suppresses error message. if [ $? ne "$SUCCESS" ] then echo "Usage: `basename $0` integerinput" exit $E_BADINPUT fi let "sum = $1 + 25" echo "Sum = $sum" # Would give error if $1 not integer.

# Any variable, not just a command line parameter, can be tested this way. exit 0

The 0 255 range for function return values is a severe limitation. Global variables and other workarounds are often problematic. An alternative method for a function to communicate a value back to the main body of the script is to have the function write to stdout the "return value", and assign this to a variable. Example 3410. Return value trickery
#!/bin/bash # multiplication.sh multiply () { local product=1 until [ z "$1" ] do let "product *= $1" shift done echo $product } mult1=15383; mult2=25211 val1=`multiply $mult1 $mult2` echo "$mult1 X $mult2 = $val1" # 387820813 mult1=25; mult2=5; mult3=20 val2=`multiply $mult1 $mult2 $mult3` echo "$mult1 X $mult2 X $mult3 = $val2" # Until uses up arguments passed... # Multiplies params passed. # Will accept a variable number of args.

# Will not echo to stdout, #+ since this will be assigned to a variable.

Chapter 34. Miscellany

354

Advanced BashScripting Guide

# 2500 mult1=188; mult2=37; mult3=25; mult4=47 val3=`multiply $mult1 $mult2 $mult3 $mult4` echo "$mult1 X $mult2 X $mult3 X mult4 = $val3" # 8173300 exit 0

The same technique also works for alphanumeric strings. This means that a function can "return" a nonnumeric value.
capitalize_ichar () { string0="$@" firstchar=${string0:0:1} string1=${string0:1} # Capitalizes initial character #+ of argument string(s) passed. # Accepts multiple arguments. # First character. # Rest of string(s).

FirstChar=`echo "$firstchar" | tr az AZ` # Capitalize first character. echo "$FirstChar$string1" } newstring=`capitalize_ichar "each sentence should start with a capital letter."` echo "$newstring" # Each sentence should start with a capital letter. # Output to stdout.

It is even possible for a function to "return" multiple values with this method.

Example 3411. Even more return value trickery

#!/bin/bash # sumproduct.sh # A function may "return" more than one value. sum_and_product () # Calculates both sum and product of passed args. { echo $(( $1 + $2 )) $(( $1 * $2 )) # Echoes to stdout each calculated value, separated by space. } echo echo "Enter first number " read first echo echo "Enter second number " read second echo retval=`sum_and_product $first $second` sum=`echo "$retval" | awk '{print $1}'` product=`echo "$retval" | awk '{print $2}'` echo "$first + $second = $sum" # Assigns output of function. # Assigns first field. # Assigns second field.

Chapter 34. Miscellany

355

Advanced BashScripting Guide

echo "$first * $second = $product" echo exit 0

Next in our bag of trick are techniques for passing an array to a function, then "returning" an array back to the main body of the script. Passing an array involves loading the spaceseparated elements of the array into a variable with command substitution. Getting an array back as the "return value" from a function uses the previously mentioned strategem of echoing the array in the function, then invoking command substitution and the ( ... ) operator to assign it to an array.

Example 3412. Passing and returning arrays

#!/bin/bash # arrayfunction.sh: Passing an array to a function and... # "returning" an array from a function

Pass_Array () { local passed_array # Local variable. passed_array=( `echo "$1"` ) echo "${passed_array[@]}" # List all the elements of the new array #+ declared and set within the function. }

original_array=( element1 element2 element3 element4 element5 ) echo echo "original_array = ${original_array[@]}" # List all elements of original array.

# This is the trick that permits passing an array to a function. # ********************************** argument=`echo ${original_array[@]}` # ********************************** # Pack a variable #+ with all the spaceseparated elements of the original array. # # Note that attempting to just pass the array itself will not work.

# This is the trick that allows grabbing an array as a "return value". # ***************************************** returned_array=( `Pass_Array "$argument"` ) # ***************************************** # Assign 'echoed' output of function to array variable. echo "returned_array = ${returned_array[@]}" echo "=============================================================" # Now, try it again, #+ attempting to access (list) the array from outside the function.

Chapter 34. Miscellany

356

Advanced BashScripting Guide

Pass_Array "$argument" # The function itself lists the array, but... #+ accessing the array from outside the function is forbidden. echo "Passed array (within function) = ${passed_array[@]}" # NULL VALUE since this is a variable local to the function. echo exit 0

For a more elaborate example of passing arrays to functions, see Example A11. Using the double parentheses construct, it is possible to use Clike syntax for setting and incrementing variables and in for and while loops. See Example 1012 and Example 1017. A useful scripting technique is to repeatedly feed the output of a filter (by piping) back to the same filter, but with a different set of arguments and/or options. Especially suitable for this are tr and grep.
# From "wstrings.sh" example. wlist=`strings "$1" | tr AZ az | tr '[:space:]' Z | \ tr cs '[:alpha:]' Z | tr s '\173\377' Z | tr Z ' '`

Example 3413. Fun with anagrams

#!/bin/bash # agram.sh: Playing games with anagrams. # Find anagrams of... LETTERSET=etaoinshrdlu anagram "$LETTERSET" | # Find all anagrams of the letterset... grep '.......' | # With at least 7 letters, grep '^is' | # starting with 'is' grep v 's$' | # no plurals grep v 'ed$' # no past tense verbs # Uses "anagram" utility #+ that is part of the author's "yawl" word list package. # http://ibiblio.org/pub/Linux/libs/yawl0.2.tar.gz exit 0 bash$ sh agram.sh islander isolate isolead isotheral # End of code.

See also Example 282, Example 1218, and Example A10. Use "anonymous here documents" to comment out blocks of code, to save having to individually comment out each line with a #. See Example 1711. Running a script on a machine that relies on a command that might not be installed is dangerous. Use whatis to avoid potential problems with this.
CMD=command1 PlanB=command2 # First choice. # Fallback option.

Chapter 34. Miscellany

357

Advanced BashScripting Guide

command_test=$(whatis "$CMD" | grep 'nothing appropriate') # If 'command1' not found on system , 'whatis' will return #+ "command1: nothing appropriate."

if [[ z "$command_test" ]] then $CMD option1 option2 else $PlanB fi

# Check whether command present. # Run command1 with options. # Otherwise, #+ run command2.

The runparts command is handy for running a set of command scripts in sequence, particularly in combination with cron or at. It would be nice to be able to invoke XWindows widgets from a shell script. There happen to exist several packages that purport to do so, namely Xscript, Xmenu, and widtools. The first two of these no longer seem to be maintained. Fortunately, it is still possible to obtain widtools here. The widtools (widget tools) package requires the XForms library to be installed. Additionally, the Makefile needs some judicious editing before the package will build on a typical Linux system. Finally, three of the six widgets offered do not work (and, in fact, segfault).

The dialog family of tools offers a method of calling "dialog" widgets from a shell script. The original dialog utility works in a text console, but its successors, gdialog, Xdialog, and kdialog use XWindowsbased widget sets.

Example 3414. Widgets invoked from a shell script

#!/bin/bash # dialog.sh: Using 'gdialog' widgets. # Must have 'gdialog' installed on your system to run this script. # This script was inspired by the following article. # "Scripting for X Productivity," by Marco Fioretti, # LINUX JOURNAL, Issue 113, September 2003, pp. 869. # Thank you, all you good people at LJ.

#Input error in dialog box. E_INPUT=65 # Dimensions of display, input widgets. HEIGHT=50 WIDTH=60 # Output file name (constructed out of script name). OUTFILE=$0.output # Display this script in a text widget. gdialog title "Displaying: $0" textbox $0 $HEIGHT $WIDTH

# Now, we'll try saving input in a file. echo n "VARIABLE=\"" > $OUTFILE # Quote it, in case of whitespace #+ in the input.

Chapter 34. Miscellany

358

Advanced BashScripting Guide

gdialog title "User Input" inputbox "Enter variable, please:" \ $HEIGHT $WIDTH 2>> $OUTFILE

if [ "$?" eq 0 ] # It's good practice to check exit status. then echo "Executed \"dialog box\" without errors." else echo "Error(s) in \"dialog box\" execution." # Or, clicked on "Cancel", instead of "OK" button. rm $OUTFILE exit $E_INPUT fi

echo n "\"" >> $OUTFILE # End quotes on saved variable. # This command stuck down here in order not to mess up #+ exit status, above.

# Now, we'll retrieve and display the saved variable. . $OUTFILE # 'Source' the saved file. echo "The variable input in the \"input box\" was: "$VARIABLE"" rm $OUTFILE # Clean up by removing the temp file. # Some applications may need to retain this file.

exit 0

For other methods of scripting with widgets, try Tk or wish (Tcl derivatives), PerlTk (Perl with Tk extensions), tksh (ksh with Tk extensions), XForms4Perl (Perl with XForms extensions), GtkPerl (Perl with Gtk extensions), or PyQt (Python with Qt extensions).

34.8. Security Issues

A brief warning about script security is appropriate. A shell script may contain a worm, trojan, or even a virus. For that reason, never run as root a script (or permit it to be inserted into the system startup scripts in /etc/rc.d) unless you have obtained said script from a trusted source or you have carefully analyzed it to make certain it does nothing harmful. Various researchers at Bell Labs and other sites, including M. Douglas McIlroy, Tom Duff, and Fred Cohen have investigated the implications of shell script viruses. They conclude that it is all to easy for even a novice, a "script kiddie", to write one. [65] Here is yet another reason to learn scripting. Being able to look at and understand scripts may protect your system from being hacked or damaged.

34.9. Portability Issues

This book deals specifically with Bash scripting on a GNU/Linux system. All the same, users of sh and ksh will find much of value here. As it happens, many of the various shells and scripting languages seem to be converging toward the POSIX Chapter 34. Miscellany 359

Advanced BashScripting Guide 1003.2 standard. Invoking Bash with the posix option or inserting a set o posix at the head of a script causes Bash to conform very closely to this standard. Even lacking this measure, most Bash scripts will run asis under ksh, and viceversa, since Chet Ramey has been busily porting ksh features to the latest versions of Bash. On a commercial UNIX machine, scripts using GNUspecific features of standard commands may not work. This has become less of a problem in the last few years, as the GNU utilities have pretty much displaced their proprietary counterparts even on "bigiron" UNIX. Caldera's release of the source to many of the original UNIX utilities has accelerated the trend. Bash has certain features that the traditional Bourne shell lacks. Among these are: Certain extended invocation options Command substitution using $( ) notation Certain string manipulation operations Process substitution Bashspecific builtins See the Bash F.A.Q. for a complete listing.

34.10. Shell Scripting Under Windows

Even users running that other OS can run UNIXlike shell scripts, and therefore benefit from many of the lessons of this book. The Cygwin package from Cygnus and the MKS utilities from Mortice Kern Associates add shell scripting capabilities to Windows.

Chapter 34. Miscellany

360

Chapter 35. Bash, version 2

The current version of Bash, the one you have running on your machine, is actually version 2.XX.Y.
bash$ echo $BASH_VERSION 2.05.8(1)release

This update of the classic Bash scripting language added array variables, [66] string and parameter expansion, and a better method of indirect variable references, among other features. Example 351. String expansion
#!/bin/bash # String expansion. # Introduced with version 2 of Bash. # Strings of the form $'xxx' # have the standard escaped characters interpreted. echo $'Ringing bell 3 times \a \a \a' echo $'Three form feeds \f \f \f' echo $'10 newlines \n\n\n\n\n\n\n\n\n\n' exit 0

Example 352. Indirect variable references the new way

#!/bin/bash # Indirect variable referencing. # This has a few of the attributes of references in C++.

a=letter_of_alphabet letter_of_alphabet=z echo "a = $a" # Direct reference.

echo "Now a = ${!a}" # Indirect reference. # The ${!variable} notation is greatly superior to the old "eval var1=\$$var2" echo t=table_cell_3 table_cell_3=24 echo "t = ${!t}" # t = 24 table_cell_3=387 echo "Value of t changed to ${!t}"

# 387

# This is useful for referencing members of an array or table, # or for simulating a multidimensional array. # An indexing option would have been nice (sigh).

Chapter 35. Bash, version 2

361

Advanced BashScripting Guide

exit 0

Example 353. Simple database application, using indirect variable referencing

#!/bin/bash # resistorinventory.sh # Simple database application using indirect variable referencing. # ============================================================== # # Data B1723_value=470 B1723_powerdissip=.25 B1723_colorcode="yellowvioletbrown" B1723_loc=173 B1723_inventory=78 B1724_value=1000 B1724_powerdissip=.25 B1724_colorcode="brownblackred" B1724_loc=24N B1724_inventory=243 B1725_value=10000 B1725_powerdissip=.25 B1725_colorcode="brownblackorange" B1725_loc=24N B1725_inventory=89 # ============================================================== # # # # # # ohms watts color bands where they are how many

echo PS3='Enter catalog number: ' echo select catalog_number in "B1723" "B1724" "B1725" do Inv=${catalog_number}_inventory Val=${catalog_number}_value Pdissip=${catalog_number}_powerdissip Loc=${catalog_number}_loc Ccode=${catalog_number}_colorcode echo echo echo echo echo break done echo; echo # Exercise: #

"Catalog number $catalog_number:" "There are ${!Inv} of [${!Val} ohm / ${!Pdissip} watt] resistors in stock." "These are located in bin # ${!Loc}." "Their color code is \"${!Ccode}\"."

Chapter 35. Bash, version 2

362

Advanced BashScripting Guide

# Rewrite this script using arrays, rather than indirect variable referencing. # Which method is more straightforward and intuitive?

# Notes: # # Shell scripts are inappropriate for anything except the most simple #+ database applications, and even then it involves workarounds and kludges. # Much better is to use a language with native support for data structures, #+ such as C++ or Java (or even Perl). exit 0

Example 354. Using arrays and other miscellaneous trickery to deal four random hands from a deck of cards
#!/bin/bash # May need to be invoked with

#!/bin/bash2

on older machines.

# Cards: # deals four random hands from a deck of cards. UNPICKED=0 PICKED=1 DUPE_CARD=99 LOWER_LIMIT=0 UPPER_LIMIT=51 CARDS_IN_SUIT=13 CARDS=52 declare a Deck declare a Suits declare a Cards # It would have been easier and more intuitive # with a single, 3dimensional array. # Perhaps a future version of Bash will support multidimensional arrays.

initialize_Deck () { i=$LOWER_LIMIT until [ "$i" gt $UPPER_LIMIT ] do Deck[i]=$UNPICKED # Set each card of "Deck" as unpicked. let "i += 1" done echo } initialize_Suits () { Suits[0]=C #Clubs Suits[1]=D #Diamonds Suits[2]=H #Hearts Suits[3]=S #Spades } initialize_Cards ()

Chapter 35. Bash, version 2

363

Advanced BashScripting Guide

{ Cards=(2 3 4 5 6 7 8 9 10 J Q K A) # Alternate method of initializing an array. } pick_a_card () { card_number=$RANDOM let "card_number %= $CARDS" if [ "${Deck[card_number]}" eq $UNPICKED ] then Deck[card_number]=$PICKED return $card_number else return $DUPE_CARD fi } parse_card () { number=$1 let "suit_number = number / CARDS_IN_SUIT" suit=${Suits[suit_number]} echo n "$suit" let "card_no = number % CARDS_IN_SUIT" Card=${Cards[card_no]} printf %4s $Card # Print cards in neat columns. } seed_random () # Seed random number generator. { seed=`eval date +%s` let "seed %= 32766" RANDOM=$seed } deal_cards () { echo cards_picked=0 while [ "$cards_picked" le $UPPER_LIMIT ] do pick_a_card t=$? if [ "$t" ne $DUPE_CARD ] then parse_card $t u=$cards_picked+1 # Change back to 1based indexing (temporarily). let "u %= $CARDS_IN_SUIT" if [ "$u" eq 0 ] # Nested if/then condition test. then echo echo fi # Separate hands. let "cards_picked += 1"

Chapter 35. Bash, version 2

364

Advanced BashScripting Guide

fi done echo return 0 }

# Structured programming: # entire program logic modularized in functions. #================ seed_random initialize_Deck initialize_Suits initialize_Cards deal_cards exit 0 #================

# Exercise 1: # Add comments to thoroughly document this script. # Exercise 2: # Revise the script to print out each hand sorted in suits. # You may add other bells and whistles if you like. # Exercise 3: # Simplify and streamline the logic of the script.

Chapter 35. Bash, version 2

365

Chapter 36. Endnotes

36.1. Author's Note
How did I come to write a Bash scripting book? It's a strange tale. It seems that a couple of years back, I needed to learn shell scripting and what better way to do that than to read a good book on the subject? I was looking to buy a tutorial and reference covering all aspects of the subject. I was looking for a book that would take difficult concepts, turn them inside out, and explain them in excruciating detail with wellcommented examples. [67] In fact, I was looking for this very book, or something much like it. Unfortunately, it didn't exist, and if I wanted it, I'd have to write it. And so, here we are, folks. This reminds me of the apocryphal story about the mad professor. Crazy as a loon, the fellow was. At the sight of a book, any book at the library, at a bookstore, anywhere he would become totally obsessed with the idea that he could have written it, should have written it, and done a better job of it to boot. He would thereupon rush home and proceed to do just that, write a book with the very same title. When he died some years later, he allegedly had several thousand books to his credit, probably putting even Asimov to shame. The books might not have been any good, who knows, but does that really matter? Here's a fellow who lived his dream, even if he was obsessed by it, driven by it, and I can't help admiring the old coot...

36.2. About the Author

Who is this guy anyhow? The author claims no credentials or special qualifications, other than a compulsion to write. [68] This book is somewhat of a departure from his other major work, HOW2 Meet Women: The Shy Man's Guide to Relationships. He has also written the SoftwareBuilding HOWTO. A Linux user since 1995 (Slackware 2.2, kernel 1.2.1), the author has emitted a few software truffles, including the cruft onetime pad encryption utility, the mcalc mortgage calculator, the judge Scrabble adjudicator, and the yawl word gaming list package. He got his start in programming using FORTRAN IV on a CDC 3800, but is not the least bit nostalgic for those days. Living in a secluded desert community with wife and dog, he cherishes human frailty.

36.3. Tools Used to Produce This Book

36.3.1. Hardware
A used IBM Thinkpad, model 760XL laptop (P166, 104 meg RAM) running Red Hat 7.1/7.3. Sure, it's slow and has a funky keyboard, but it beats the heck out of a No. 2 pencil and a Big Chief tablet.

36.3.2. Software and Printware

i. Bram Moolenaar's powerful SGMLaware vim text editor. ii. OpenJade, a DSSSL rendering engine for converting SGML documents into other formats. iii. Norman Walsh's DSSSL stylesheets. iv. DocBook, The Definitive Guide, by Norman Walsh and Leonard Muellner (O'Reilly, ISBN Chapter 36. Endnotes 366

Advanced BashScripting Guide 1565925807). This is the standard reference for anyone attempting to write a document in Docbook SGML format.

36.4. Credits
Community participation made this project possible. The author gratefully acknowledges that writing this book would have been an impossible task without help and feedback from all you people out there. Philippe Martin translated this document into DocBook/SGML. While not on the job at a small French company as a software developer, he enjoys working on GNU/Linux documentation and software, reading literature, playing music, and for his peace of mind making merry with friends. You may run across him somewhere in France or in the Basque Country, or email him at [email protected]. Philippe Martin also pointed out that positional parameters past $9 are possible using {bracket} notation, see Example 45. Stephane Chazelas sent a long list of corrections, additions, and example scripts. More than a contributor, he has, in effect, taken on the role of editor for this document. Merci beaucoup! I would like to especially thank Patrick Callahan, Mike Novak, and Pal Domokos for catching bugs, pointing out ambiguities, and for suggesting clarifications and changes. Their lively discussion of shell scripting and general documentation issues inspired me to try to make this document more readable. I'm grateful to Jim Van Zandt for pointing out errors and omissions in version 0.2 of this document. He also contributed an instructive example script. Many thanks to Jordi Sanfeliu for giving permission to use his fine tree script (Example A18). Likewise, thanks to Michel Charpentier for permission to use his dc factoring script (Example 1237). Kudos to Noah Friedman for permission to use his string function script (Example A19). Emmanuel Rouat suggested corrections and additions on command substitution and aliases. He also contributed a very nice sample .bashrc file (Appendix H). Heiner Steven kindly gave permission to use his base conversion script, Example 1233. He also made a number of corrections and many helpful suggestions. Special thanks. Rick Boivie contributed the delightfully recursive pb.sh script (Example 347) and suggested performance improvements for the monthlypmt.sh script (Example 1232). Florian Wisser enlightened me on some of the fine points of testing strings (see Example 76), and on other matters. Oleg Philon sent suggestions concerning cut and pidof. Michael Zick extended the empty array example to demonstrate some surprising array properties. He also provided other examples of this. MarcJano Knopp sent corrections on DOS batch files. Chapter 36. Endnotes 367

Advanced BashScripting Guide Hyun Jin Cha found several typos in the document in the process of doing a Korean translation. Thanks for pointing these out. Andreas Abraham sent in a long list of typographical errors and other corrections. Special thanks! Others making helpful suggestions and pointing out errors were Gabor Kiss, Leopold Toetsch, Peter Tillier, Marcus Berglof, Tony Richardson, Nick Drage (script ideas!), Rich Bartell, Jess Thrysoee, Adam Lazur, Bram Moolenaar, Baris Cicek, Greg Keraunen, Keith Matthews, Sandro Magi, Albert Reiner, Dim Segebart, Rory Winston, Lee Bigelow, Wayne Pollock, "jipe", Emilio Conti, Dennis Leeuw, Dan Jacobson, Aurelio Marinho Jargas, Edward Scholtz, Jean Helou, and David Lawyer (himself an author of 4 HOWTOs). My gratitude to Chet Ramey and Brian Fox for writing Bash, an elegant and powerful scripting tool. Very special thanks to the hardworking volunteers at the Linux Documentation Project. The LDP hosts a repository of Linux knowledge and lore, and has, to a large extent, enabled the publication of this book. Thanks and appreciation to IBM, Red Hat, the Free Software Foundation, and all the good people fighting the good fight to keep Open Source software free and open. Thanks most of all to my wife, Anita, for her encouragement and emotional support.

Chapter 36. Endnotes

368

Bibliography
Edited by Peter Denning, Computers Under Attack: Intruders, Worms, and Viruses, ACM Press, 1990, 0201530678. This compendium contains a couple of articles on shell script viruses. *

Dale Dougherty and Arnold Robbins, Sed and Awk, 2nd edition, O'Reilly and Associates, 1997, 11565922255. To unfold the full power of shell scripting, you need at least a passing familiarity with sed and awk. This is the standard tutorial. It includes an excellent introduction to "regular expressions". Read this book. *

Aeleen Frisch, Essential System Administration, 3rd edition, O'Reilly and Associates, 2002, 0596003439. This excellent sys admin manual has a decent introduction to shell scripting for sys administrators and does a nice job of explaining the startup and initialization scripts. The long overdue third edition of this classic has finally been released. *

Stephen Kochan and Patrick Woods, Unix Shell Programming, Hayden, 1990, 067248448X. The standard reference, though a bit dated by now. *

Neil Matthew and Richard Stones, Beginning Linux Programming, Wrox Press, 1996, 1874416680. Good indepth coverage of various programming languages available for Linux, including a fairly strong chapter on shell scripting. *

Herbert Mayer, Advanced C Programming on the IBM PC, Windcrest Books, 1989, 0830693637. Excellent coverage of algorithms and general programming practices. *

Bibliography

369

Advanced BashScripting Guide David Medinets, Unix Shell Programming Tools, McGrawHill, 1999, 0070397333. Good info on shell scripting, with examples, and a short intro to Tcl and Perl. *

Cameron Newham and Bill Rosenblatt, Learning the Bash Shell, 2nd edition, O'Reilly and Associates, 1998, 1565923472. This is a valiant effort at a decent shell primer, but somewhat deficient in coverage on programming topics and lacking sufficient examples. *

Anatole Olczak, Bourne Shell Quick Reference Guide, ASP, Inc., 1991, 093573922X. A very handy pocket reference, despite lacking coverage of Bashspecific features. *

Jerry Peek, Tim O'Reilly, and Mike Loukides, Unix Power Tools, 2nd edition, O'Reilly and Associates, Random House, 1997, 1565922603. Contains a couple of sections of very informative indepth articles on shell programming, but falls short of being a tutorial. It reproduces much of the regular expressions tutorial from the Dougherty and Robbins book, above. *

Clifford Pickover, Computers, Pattern, Chaos, and Beauty, St. Martin's Press, 1990, 0312041233. A treasure trove of ideas and recipes for computerbased exploration of mathematical oddities. *

George Polya, How To Solve It, Princeton University Press, 1973, 0691023565. The classic tutorial on problem solving methods (i.e., algorithms). *

Arnold Robbins, Bash Reference Card, SSC, 1998, 1587310105. Excellent Bash pocket reference (don't leave home without it). A bargain at $4.95, but also available for free download online in pdf format. Bibliography 370

Advanced BashScripting Guide *

Arnold Robbins, Effective Awk Programming, Free Software Foundation / O'Reilly and Associates, 2000, 1882114264. The absolute best awk tutorial and reference. The free electronic version of this book is part of the awk documentation, and printed copies of the latest version are available from O'Reilly and Associates. This book has served as an inspiration for the author of this document. *

Bill Rosenblatt, Learning the Korn Shell, O'Reilly and Associates, 1993, 1565920546. This wellwritten book contains some excellent pointers on shell scripting. *

Paul Sheer, LINUX: Rute User's Tutorial and Exposition, 1st edition, , 2002, 0130333514. Very detailed and readable introduction to Linux system administration. The book is available in print, or online. *

Ellen Siever and the staff of O'Reilly and Associates, Linux in a Nutshell, 2nd edition, O'Reilly and Associates, 1999, 1565925858. The allaround best Linux command reference, even has a Bash section. *

The UNIX CD Bookshelf, 3rd edition, O'Reilly and Associates, 2003, 0596003927. An array of seven UNIX books on CD ROM, including UNIX Power Tools, Sed and Awk, and Learning the Korn Shell. A complete set of all the UNIX references and tutorials you would ever need at about $130. Buy this one, even if it means going into debt and not paying the rent. *

The O'Reilly books on Perl. (Actually, any O'Reilly books.)

Bibliography

371

Advanced BashScripting Guide Fioretti, Marco, "Scripting for X Productivity," LINUX JOURNAL, Issue 113, September, 2003, pp. 869.

Ben Okopnik's wellwritten introductory Bash scripting articles in issues 53, 54, 55, 57, and 59 of the Linux Gazette , and his explanation of "The Deep, Dark Secrets of Bash" in issue 56.

Chet Ramey's bash The GNU Shell, a twopart series published in issues 3 and 4 of the Linux Journal, JulyAugust 1994.

Mike G's BashProgrammingIntro HOWTO.

Richard's UNIX Scripting Universe.

Chet Ramey's Bash F.A.Q.

Ed Schaefer's Shell Corner in Unix Review.

Example shell scripts at Lucc's Shell Scripts .

Example shell scripts at SHELLdorado .

Example shell scripts at Noah Friedman's script site.

Steve Parker's Shell Programming Stuff.

Example shell scripts at SourceForge Snippet Library shell scrips.

Giles Orr's BashPrompt HOWTO.

Very nice sed, awk, and regular expression tutorials at The UNIX Grymoire.

Eric Pement's sed resources page.

The GNU gawk reference manual (gawk is the extended GNU version of awk available on Linux and BSD systems).

Bibliography

372

Advanced BashScripting Guide Trent Fisher's groff tutorial.

Mark Komarinski's PrintingUsage HOWTO.

There is some nice material on I/O redirection in chapter 10 of the textutils documentation at the University of Alberta site.

Rick Hohensee has written the osimpa i386 assembler entirely as Bash scripts.

Aurelio Marinho Jargas has written a Regular expression wizard. He has also written an informative book on Regular Expressions, in Portuguese.

Rocky Bernstein is in the process of developing a "fullfledged" debugger for Bash.

The excellent "Bash Reference Manual", by Chet Ramey and Brian Fox, distributed as part of the "bash2doc" package (available as an rpm). See especially the instructive example scripts in this package.

The comp.os.unix.shell newsgroup.

The manpages for bash and bash2, date, expect, expr, find, grep, gzip, ln, patch, tar, tr, bc, xargs. The texinfo documentation on bash, dd, m4, gawk, and sed.

Bibliography

373

Appendix A. Contributed Scripts

These scripts, while not fitting into the text of this document, do illustrate some interesting shell programming techniques. They are useful, too. Have fun analyzing and running them.

Example A1. manview: Viewing formatted manpages

#!/bin/bash # manview.sh: Formats the source of a man page for viewing. # This is useful when writing man page source and you want to #+ look at the intermediate results on the fly while working on it. E_WRONGARGS=65 if [ z "$1" ] then echo "Usage: `basename $0` filename" exit $E_WRONGARGS fi groff Tascii man $1 | less # From the man page for groff. # If the man page includes tables and/or equations, #+ then the above code will barf. # The following line can handle such cases. # # gtbl < "$1" | geqn Tlatin1 | groff Tlatin1 mttychar man # # Thanks, S.C. exit 0

Example A2. mailformat: Formatting an email message

#!/bin/bash # mailformat.sh: Format email messages. # Gets rid of carets, tabs, also fold excessively long lines. # ================================================================= # Standard Check for Script Argument(s) ARGS=1 E_BADARGS=65 E_NOFILE=66 if [ $# ne $ARGS ] # Correct number of arguments passed to script? then echo "Usage: `basename $0` filename" exit $E_BADARGS fi if [ f "$1" ] then file_name=$1 # Check if file exists.

Appendix A. Contributed Scripts

374

Advanced BashScripting Guide

else echo "File \"$1\" does not exist." exit $E_NOFILE fi # ================================================================= MAXWIDTH=70 # Width to fold long lines to.

# Delete carets and tabs at beginning of lines, #+ then fold lines to $MAXWIDTH characters. sed ' s/^>// s/^ *>// s/^ *// s/ *// ' $1 | fold s width=$MAXWIDTH # s option to "fold" breaks lines at whitespace, if possible. # #+ # # #+ This script was inspired by an article in a wellknown trade journal extolling a 164K Windows utility with similar functionality. An nice set of text processing utilities and an efficient scripting language provide an alternative to bloated executables.

exit 0

Example A3. rn: A simpleminded file rename utility This script is a modification of Example 1215.
#! /bin/bash # # Very simpleminded filename "rename" utility (based on "lowercase.sh"). # # The "ren" utility, by Vladimir Lanin ([email protected]), #+ does a much better job of this.

ARGS=2 E_BADARGS=65 ONE=1

# For getting singular/plural right (see below).

if [ $# ne "$ARGS" ] then echo "Usage: `basename $0` oldpattern newpattern" # As in "rn gif jpg", which renames all gif files in working directory to jpg. exit $E_BADARGS fi number=0 # Keeps track of how many files actually renamed.

for filename in *$1* #Traverse all matching files in directory. do if [ f "$filename" ] # If finds match... then fname=`basename $filename` # Strip off path. n=`echo $fname | sed e "s/$1/$2/"` # Substitute new for old in filename. mv $fname $n # Rename.

Appendix A. Contributed Scripts

375

Advanced BashScripting Guide

let "number += 1" fi done if [ "$number" eq "$ONE" ] then echo "$number file renamed." else echo "$number files renamed." fi exit 0 # For correct grammar.

# Exercises: # # What type of files will this not work on? # How can this be fixed? # # Rewrite this script to process all the files in a directory #+ containing spaces in their names, and to rename them, #+ substituting an underscore for each space.

Example A4. blankrename: renames filenames containing blanks This is an even simplerminded version of previous script.
#! /bin/bash # blankrename.sh # # Substitutes underscores for blanks in all the filenames in a directory. ONE=1 number=0 FOUND=0 # For getting singular/plural right (see below). # Keeps track of how many files actually renamed. # Successful return value.

for filename in * #Traverse all files in directory. do echo "$filename" | grep q " " # Check whether filename if [ $? eq $FOUND ] #+ contains space(s). then fname=$filename # Strip off path. n=`echo $fname | sed e "s/ /_/g"` # Substitute underscore for blank. mv "$fname" "$n" # Do the actual renaming. let "number += 1" fi done if [ "$number" eq "$ONE" ] then echo "$number file renamed." else echo "$number files renamed." fi exit 0 # For correct grammar.

Example A5. encryptedpw: Uploading to an ftp site, using a locally encrypted password Appendix A. Contributed Scripts 376

Advanced BashScripting Guide

#!/bin/bash # Example "ex72.sh" modified to use encrypted password. # Note that this is still somewhat insecure, #+ since the decrypted password is sent in the clear. # Use something like "ssh" if this is a concern. E_BADARGS=65 if [ z "$1" ] then echo "Usage: `basename $0` filename" exit $E_BADARGS fi Username=bozo # Change to suit. pword=/home/bozo/secret/password_encrypted.file # File containing encrypted password. Filename=`basename $1` Server="XXX" Directory="YYY" # Strips pathname out of file name

# Change above to actual server name & directory.

Password=`cruft <$pword` # Decrypt password. # Uses the author's own "cruft" file encryption package, #+ based on the classic "onetime pad" algorithm, #+ and obtainable from: #+ Primarysite: ftp://ibiblio.org/pub/Linux/utils/file #+ cruft0.2.tar.gz [16k]

ftp n $Server user $Username binary bell cd $Directory put $Filename bye EndOfSession # n option to # "bell" rings exit 0

<<EndOfSession $Password

"ftp" disables autologon. 'bell' after each file transfer.

Example A6. copycd: Copying a data CD

#!/bin/bash # copycd.sh: copying a data CD CDROM=/dev/cdrom OF=/home/bozo/projects/cdimage.iso # /xxxx/xxxxxxx/ BLOCKSIZE=2048 SPEED=2 # CD ROM device # output file Change to suit your system. # May use higher speed if supported.

echo; echo "Insert source CD, but do *not* mount it." echo "Press ENTER when ready. "

Appendix A. Contributed Scripts

377

Advanced BashScripting Guide

read ready # Wait for input, $ready not used.

echo; echo "Copying the source CD to $OF." echo "This may take a while. Please be patient." dd if=$CDROM of=$OF bs=$BLOCKSIZE # Raw device copy.

echo; echo "Remove data CD." echo "Insert blank CDR." echo "Press ENTER when ready. " read ready echo "Copying $OF to CDR."

# Wait for input, $ready not used.

cdrecord v isosize speed=$SPEED dev=0,0 $OF # Uses Joerg Schilling's "cdrecord" package (see its docs). # http://www.fokus.gmd.de/nthp/employees/schilling/cdrecord.html

echo; echo "Done copying $OF to CDR on device $CDROM." echo "Do you want to erase the image file (y/n)? " read answer case "$answer" in [yY]) rm f $OF echo "$OF erased." ;; *) echo "$OF not erased.";; esac echo # Exercise: # Change the above "case" statement to also accept "yes" and "Yes" as input. exit 0 # Probably a huge file.

Example A7. Collatz series

#!/bin/bash # collatz.sh # # # # # # # # # # # #+ #+ #+ # # The notorious "hailstone" or Collatz series. 1) Get the integer "seed" from the command line. 2) NUMBER < seed 3) Print NUMBER. 4) If NUMBER is even, divide by 2, or 5)+ if odd, multiply by 3 and add 1. 6) NUMBER < result 7) Loop back to step 3 (for specified number of iterations). The theory is that every sequence, no matter how large the initial value, eventually settles down to repeating "4,2,1..." cycles, even after fluctuating through a wide range of values. This is an instance of an "iterate",

Appendix A. Contributed Scripts

378

Advanced BashScripting Guide

#+ an operation that feeds its output back into the input. # Sometimes the result is a "chaotic" series.

MAX_ITERATIONS=200 # For large seed numbers (>32000), increase MAX_ITERATIONS. h=${1:$$} # Seed # Use $PID as seed, #+ if not specified as commandline arg.

echo echo "C($h) $MAX_ITERATIONS Iterations" echo for ((i=1; i<=MAX_ITERATIONS; i++)) do echo n "$h " # ^^^^^ # tab let "remainder = h % 2" if [ "$remainder" eq 0 ] then let "h /= 2" else let "h = h*3 + 1" fi

# Even? # Divide by 2. # Multiply by 3 and add 1.

COLUMNS=10 # Output 10 values per line. let "line_break = i % $COLUMNS" if [ "$line_break" eq 0 ] then echo fi done echo # For more information on this mathematical function, #+ see "Computers, Pattern, Chaos, and Beauty", by Pickover, p. 185 ff., #+ as listed in the bibliography. exit 0

Example A8. daysbetween: Calculate number of days between two dates

#!/bin/bash # daysbetween.sh: Number of days between two dates. # Usage: ./daysbetween.sh [M]M/[D]D/YYYY [M]M/[D]D/YYYY ARGS=2 E_PARAM_ERR=65 REFYR=1600 CENTURY=100 DIY=365 # Two command line parameters expected. # Param error. # Reference year.

Appendix A. Contributed Scripts

379

Advanced BashScripting Guide

ADJ_DIY=367 MIY=12 DIM=31 LEAPCYCLE=4 MAXRETVAL=256 # Adjusted for leap year + fraction.

# Largest permissable # positive return value from a function. # Declare global variable for date difference. # Declare global variable for absolute value. # Declare globals for day, month, year.

diff= value= day= month= year=

Param_Error () # Command line parameters wrong. { echo "Usage: `basename $0` [M]M/[D]D/YYYY [M]M/[D]D/YYYY" echo " (date must be after 1/3/1600)" exit $E_PARAM_ERR }

Parse_Date () { month=${1%%/**} dm=${1%/**} day=${dm#*/} let "year = `basename $1`" }

# Parse date from command line params.

# Day and month. # Not a filename, but works just the same.

check_date () # Checks for invalid date(s) passed. { [ "$day" gt "$DIM" ] || [ "$month" gt "$MIY" ] || [ "$year" lt "$REFYR" ] && Param_Error # Exit script on bad value(s). # Uses "orlist / andlist". # # Exercise: Implement more rigorous date checking. }

strip_leading_zero () # Better to strip { # from day and/or val=${1#0} # since otherwise return $val # as octal values }

possible leading zero(s) month Bash will interpret them (POSIX.2, sect 2.9.2.1).

day_index () { day=$1 month=$2 year=$3

# Gauss' Formula: # Days from Jan. 3, 1600 to date passed as param.

let "month = $month 2" if [ "$month" le 0 ] then let "month += 12" let "year = 1" fi

Appendix A. Contributed Scripts

380

Advanced BashScripting Guide

let "year = $REFYR" let "indexyr = $year / $CENTURY"

let "Days = $DIY*$year + $year/$LEAPCYCLE $indexyr + $indexyr/$LEAPCYCLE + $ADJ_DIY*$month/$M # For an indepth explanation of this algorithm, see # http://home.tonline.de/home/berndt.schwerdtfeger/cal.htm

if [ "$Days" gt "$MAXRETVAL" ] then let "dindex = 0 $Days" else let "dindex = $Days" fi return $dindex }

# If greater than 256, # then change to negative value # which can be returned from function.

calculate_difference () { let "diff = $1 $2" }

# Difference between to day indices. # Global variable.

abs () { if [ "$1" lt 0 ] then let "value = 0 $1" else let "value = $1" fi }

# # # # # # #

Absolute value Uses global "value" variable. If negative then change sign, else leave it alone.

if [ $# ne "$ARGS" ] then Param_Error fi Parse_Date $1 check_date $day $month $year strip_leading_zero $day day=$? strip_leading_zero $month month=$? day_index $day $month $year date1=$? abs $date1 date1=$value Parse_Date $2 check_date $day $month $year strip_leading_zero $day

# Require two command line params.

# See if valid date. # Remove any leading zeroes # on day and/or month.

# Make sure it's positive # by getting absolute value.

Appendix A. Contributed Scripts

381

Advanced BashScripting Guide

day=$? strip_leading_zero $month month=$? day_index $day $month $year date2=$? abs $date2 date2=$value calculate_difference $date1 $date2 abs $diff diff=$value echo $diff exit 0 # Compare this script with the implementation of Gauss' Formula in C at # http://buschencrew.hypermart.net/software/datedif # Make sure it's positive. # Make sure it's positive.

Example A9. Make a "dictionary"

#!/bin/bash # makedict.sh

[make dictionary]

# Modification of /usr/sbin/mkdict script. # Original script copyright 1993, by Alec Muffett. # # This modified script included in this document in a manner #+ consistent with the "LICENSE" document of the "Crack" package #+ that the original script is a part of. # #+ # #+ This script processes text files to produce a sorted list of words found in the files. This may be useful for compiling dictionaries and for lexicographic research.

E_BADARGS=65 if [ ! r "$1" ] then echo "Usage: $0 filestoprocess" exit $E_BADARGS fi # Need at least one #+ valid file argument.

# SORT="sort"

# No longer necessary to define options #+ to sort. Changed from original script. # Contents of specified files to stdout. # Convert to lowercase. # New: change spaces to newlines. # Get rid of everything nonalphanumeric #+ (original script). # Rather than deleting #+ now change nonalpha to newlines. # $SORT options unnecessary now. # Remove duplicates.

cat $* | tr AZ az | tr ' ' '\012' | # tr cd '\012[az][09]' | tr c '\012az' sort | uniq | '\012' |

Appendix A. Contributed Scripts

382

Advanced BashScripting Guide

grep v '^#' | grep v '^$' exit 0 # Delete lines beginning with a hashmark. # Delete blank lines.

Example A10. Soundex conversion

#!/bin/bash # soundex.sh: Calculate "soundex" code for names # ======================================================= # Soundex script # by # Mendel Cooper # [email protected] # 23 January, 2002 # # Placed in the Public Domain. # # A slightly different version of this script appeared in #+ Ed Schaefer's July, 2002 "Shell Corner" column #+ in "Unix Review" online, #+ http://www.unixreview.com/documents/uni1026336632258/ # =======================================================

ARGCOUNT=1 E_WRONGARGS=70

# Need name as argument.

if [ $# ne "$ARGCOUNT" ] then echo "Usage: `basename $0` name" exit $E_WRONGARGS fi

assign_value () { val1=bfpv val2=cgjkqsxz val3=dt val4=l val5=mn val6=r

# Assigns numerical value #+ to letters of name. # 'b,f,p,v' = 1 # 'c,g,j,k,q,s,x,z' = 2 # etc.

# Exceptionally clever use of 'tr' follows. # Try to figure out what is going on here. value=$( echo "$1" \ | tr d wh \ | tr $val1 1 | tr $val2 2 | tr $val3 3 \ | tr $val4 4 | tr $val5 5 | tr $val6 6 \ | tr s 123456 \ | tr d aeiouy ) # # # # Assign Remove Ignore Ignore letter values. duplicate numbers, except when separated by vowels. vowels, except as separators, so delete them last. 'w' and 'h', even as separators, so delete them first.

Appendix A. Contributed Scripts

383

Advanced BashScripting Guide

# # The above command substitution lays more pipe than a plumber <g>. }

input_name="$1" echo echo "Name = $input_name"

# Change all characters of name input to lowercase. # name=$( echo $input_name | tr AZ az ) # # Just in case argument to script is mixed case.

# Prefix of soundex code: first letter of name. #

char_pos=0 # Initialize character position. prefix0=${name:$char_pos:1} prefix=`echo $prefix0 | tr az AZ` # Uppercase 1st letter of soundex. let "char_pos += 1" name1=${name:$char_pos} # Bump character position to 2nd letter of name.

# ++++++++++++++++++++++++++ Exception Patch +++++++++++++++++++++++++++++++++ # Now, we run both the input name and the name shifted one char to the right #+ through the valueassigning function. # If we get the same value out, that means that the first two characters #+ of the name have the same value assigned, and that one should cancel. # However, we also need to test whether the first letter of the name #+ is a vowel or 'w' or 'h', because otherwise this would bollix things up. char1=`echo $prefix | tr AZ az` assign_value $name s1=$value assign_value $name1 s2=$value assign_value $char1 s3=$value s3=9$s3 # First letter of name, lowercased.

# #+ #+ #+ #+

If first letter of name is a vowel or 'w' or 'h', then its "value" will be null (unset). Therefore, set it to 9, an otherwise unused value, which can be tested for.

if [[ "$s1" ne "$s2" || "$s3" eq 9 ]] then suffix=$s2 else suffix=${s2:$char_pos} fi # ++++++++++++++++++++++ end Exception Patch +++++++++++++++++++++++++++++++++

Appendix A. Contributed Scripts

384

Advanced BashScripting Guide

padding=000 # Use at most 3 zeroes to pad.

soun=$prefix$suffix$padding MAXLEN=4 soundex=${soun:0:$MAXLEN} echo "Soundex = $soundex" echo # #+ # #+ # # # # # # # # # # # # # #+ #+

# Pad with zeroes. # Truncate to maximum of 4 chars.

The soundex code is a method of indexing and classifying names by grouping together the ones that sound alike. The soundex code for a given name is the first letter of the name, followed by a calculated threenumber code. Similar sounding names should have almost the same soundex codes. Examples: Smith and Smythe both have a "S530" soundex. Harrison = H625 Hargison = H622 Harriman = H655 This works out fairly well in practice, but there are numerous anomalies.

The U.S. Census and certain other governmental agencies use soundex, as do genealogical researchers. For more information, see the "National Archives and Records Administration home page", http://www.nara.gov/genealogy/soundex/soundex.html

# Exercise: # # Simplify the "Exception Patch" section of this script. exit 0

Example A11. "Game of Life"

#!/bin/bash # life.sh: "Life in the Slow Lane" # ##################################################################### # # This is the Bash script version of John Conway's "Game of Life". # # "Life" is a simple implementation of cellular automata. # # # # On a rectangular grid, let each "cell" be either "living" or "dead". # # Designate a living cell with a dot, and a dead one with a blank space.# # Begin with an arbitrarily drawn dotandblank grid, # #+ and let this be the starting generation, "generation 0". # # Determine each successive generation by the following rules: # # 1) Each cell has 8 neighbors, the adjoining cells # #+ left, right, top, bottom, and the 4 diagonals. # # 123 #

Appendix A. Contributed Scripts

385

Advanced BashScripting Guide

# 4*5 # 678 # # 2) A living cell with either 2 or 3 living neighbors remains alive. # 3) A dead cell with 3 living neighbors becomes alive (a "birth"). SURVIVE=2 BIRTH=3 # 4) All other cases result in dead cells. # ##################################################################### # # # # # # # # #

startfile=gen0

if [ n "$1" ] then if [ e "$1" ] # Check for existence. then startfile="$1" fi fi

# Read the starting generation from the file "gen0". # Default, if no other file specified when invoking script. # # Specify another "generation 0" file.

ALIVE1=. DEAD1=_ # Represent living and "dead" cells in the startup file. # This script uses a 10 x 10 grid (may be increased, #+ but a large grid will will cause very slow execution). ROWS=10 COLS=10 GENERATIONS=10 # How many generations to cycle through. # Adjust this upwards, #+ if you have time on your hands. # Exit status on premature bailout, #+ if no cells left alive.

NONE_ALIVE=80 TRUE=0 FALSE=1 ALIVE=0 DEAD=1 avar= generation=0

# Global; holds current generation. # Initialize generation count.

# =================================================================

let "cells = $ROWS * $COLS" # How many cells. declare a initial declare a current display () { alive=0 # How many cells "alive". # Initially zero. # Arrays containing "cells".

declare a arr

Appendix A. Contributed Scripts

386

Advanced BashScripting Guide

arr=( `echo "$1"` ) # Convert passed arg to array.

element_count=${#arr[*]} local i local rowcheck for ((i=0; i<$element_count; i++)) do # Insert newline at end of each row. let "rowcheck = $i % ROWS" if [ "$rowcheck" eq 0 ] then echo # Newline. echo n " " # Indent. fi cell=${arr[i]} if [ "$cell" = . ] then let "alive += 1" fi echo n "$cell" | sed e 's/_/ /g' # Print out array and change underscores to spaces. done return } IsValid () { if [ z "$1" o z "$2" ] then return $FALSE fi local local local local local row lower_limit=0 upper_limit left right # Test whether cell coordinate valid.

# Mandatory arguments missing?

# Disallow negative coordinate.

let "upper_limit = $ROWS * $COLS 1" # Total number of cells.

if [ "$1" lt "$lower_limit" o "$1" gt "$upper_limit" ] then return $FALSE # Out of array bounds. fi row=$2 let "left = $row * $ROWS" let "right = $left + $COLS 1"

# Left limit. # Right limit.

if [ "$1" lt "$left" o "$1" gt "$right" ] then return $FALSE # Beyond row boundary.

Appendix A. Contributed Scripts

387

Advanced BashScripting Guide

fi return $TRUE } # Valid coordinate.

IsAlive () { GetCount "$1" $2 local nhbd=$?

# Test whether cell is alive. # Takes array, cell number, state of cell as arguments. # Get alive cell count in neighborhood.

if [ "$nhbd" eq "$BIRTH" ] then return $ALIVE fi

# Alive in any case.

if [ "$3" = "." a "$nhbd" eq "$SURVIVE" ] then # Alive only if previously alive. return $ALIVE fi return $DEAD } # Default.

GetCount ()

# # # #

Count live cells in passed cell's neighborhood. Two arguments needed: $1) variable holding array $2) cell number

{ local local local local local local local local local local local local local cell_number=$2 array top center bottom r row i t_top t_cen t_bot count=0 ROW_NHBD=3

array=( `echo "$1"` ) let let let let "top = $cell_number $COLS 1" # Set up cell neighborhood. "center = $cell_number 1" "bottom = $cell_number + $COLS 1" "r = $cell_number / $ROWS" # Traverse from left to right.

for ((i=0; i<$ROW_NHBD; i++)) do let "t_top = $top + $i" let "t_cen = $center + $i" let "t_bot = $bottom + $i"

Appendix A. Contributed Scripts

388

Advanced BashScripting Guide

let "row = $r" # Count center row of neighborhood. IsValid $t_cen $row # Valid cell position? if [ $? eq "$TRUE" ] then if [ ${array[$t_cen]} = "$ALIVE1" ] # Is it alive? then # Yes? let "count += 1" # Increment count. fi fi let "row = $r 1" # Count top row. IsValid $t_top $row if [ $? eq "$TRUE" ] then if [ ${array[$t_top]} = "$ALIVE1" ] then let "count += 1" fi fi let "row = $r + 1" # Count bottom row. IsValid $t_bot $row if [ $? eq "$TRUE" ] then if [ ${array[$t_bot]} = "$ALIVE1" ] then let "count += 1" fi fi done

if [ ${array[$cell_number]} = "$ALIVE1" ] then let "count = 1" # Make sure value of tested cell itself fi #+ is not counted.

return $count } next_gen () { local array local i=0 array=( `echo "$1"` ) # Convert passed arg to array. # Update generation array.

while [ "$i" lt "$cells" ] do IsAlive "$1" $i ${array[$i]} if [ $? eq "$ALIVE" ] then array[$i]=. else array[$i]="_" fi let "i += 1" done

# Is cell alive? # If alive, then #+ represent the cell as a period. # Otherwise underscore #+ (which will later be converted to space).

Appendix A. Contributed Scripts

389

Advanced BashScripting Guide

# let "generation += 1"

# Increment generation count.

# Set variable to pass as parameter to "display" function. avar=`echo ${array[@]}` # Convert array back to string variable. display "$avar" # Display it. echo; echo echo "Generation $generation $alive alive" if [ "$alive" eq 0 ] then echo echo "Premature exit: no more cells alive!" exit $NONE_ALIVE # No point in continuing fi #+ if no live cells. }

# ========================================================= # main () # Load initial array with contents of startup file. initial=( `cat "$startfile" | sed e '/#/d' | tr d '\n' |\ sed e 's/\./\. /g' e 's/_/_ /g'` ) # Delete lines containing '#' comment character. # Remove linefeeds and insert space between elements. clear echo echo echo echo echo echo # Clear screen.

# Title "=======================" " $GENERATIONS generations" " of" "\"Life in the Slow Lane\"" "======================="

# Display first generation. Gen0=`echo ${initial[@]}` display "$Gen0" # Display only. echo; echo echo "Generation $generation $alive alive" #

let "generation += 1" echo

# Increment generation count.

# Display second generation. Cur=`echo ${initial[@]}` next_gen "$Cur" # Update & display. # let "generation += 1" # Increment generation count.

# Main loop for displaying subsequent generations while [ "$generation" le "$GENERATIONS" ] do Cur="$avar"

Appendix A. Contributed Scripts

390

Advanced BashScripting Guide

next_gen "$Cur" let "generation += 1" done # ============================================================== echo exit 0 # # # # # # The grid in this script has a "boundary problem". The the top, bottom, and sides border on a void of dead cells. Exercise: Change the script to have the grid wrap around, + so that the left and right sides will "touch", + as will the top and bottom.

Example A12. Data file for "Game of Life"

# This is an example "generation 0" startup file for "life.sh". # # The "gen0" file is a 10 x 10 grid using a period (.) for live cells, #+ and an underscore (_) for dead ones. We cannot simply use spaces #+ for dead cells in this file because of a peculiarity in Bash arrays. # [Exercise for the reader: explain this.] # # Lines beginning with a '#' are comments, and the script ignores them. __.__..___ ___._.____ ____.___.. _._______. ____._____ ..__...___ ____._____ ___...____ __.._..___ _..___..__

+++ The following two scripts are by Mark Moraes of the University of Toronto. See the enclosed file "MoraesCOPYRIGHT" for permissions and restrictions.

Example A13. behead: Removing mail and news message headers

#! /bin/sh # Strips off the header from a mail/News message i.e. till the first # empty line # Mark Moraes, University of Toronto # ==> These comments added by author of this document. if [ $# eq 0 ]; then # ==> If no command line args present, then works on file redirected to stdin. sed e '1,/^$/d' e '/^[ ]*$/d' # > Delete empty lines and all lines until # > first one beginning with white space. else

Appendix A. Contributed Scripts

391

Advanced BashScripting Guide

# ==> If command line args present, then work on files named. for i do sed e '1,/^$/d' e '/^[ ]*$/d' $i # > Ditto, as above. done fi # # # # ==> Exercise: Add error checking and other options. ==> ==> Note that the small sed script repeats, except for the arg passed. ==> Does it make sense to embed it in a function? Why or why not?

Example A14. ftpget: Downloading files via ftp

#! /bin/sh # $Id: ftpget,v 1.2 91/05/07 21:15:43 moraes Exp $ # Script to perform batch anonymous ftp. Essentially converts a list of # of command line arguments into input to ftp. # Simple, and quick written as a companion to ftplist # h specifies the remote host (default prep.ai.mit.edu) # d specifies the remote directory to cd to you can provide a sequence # of d options they will be cd'ed to in turn. If the paths are relative, # make sure you get the sequence right. Be careful with relative paths # there are far too many symlinks nowadays. # (default is the ftp login directory) # v turns on the verbose option of ftp, and shows all responses from the # ftp server. # f remotefile[:localfile] gets the remote file into localfile # m pattern does an mget with the specified pattern. Remember to quote # shell characters. # c does a local cd to the specified directory # For example, # ftpget h expo.lcs.mit.edu d contrib f xplaces.shar:xplaces.sh \ # d ../pub/R3/fixes c ~/fixes m 'fix*' # will get xplaces.shar from ~ftp/contrib on expo.lcs.mit.edu, and put it in # xplaces.sh in the current working directory, and get all fixes from # ~ftp/pub/R3/fixes and put them in the ~/fixes directory. # Obviously, the sequence of the options is important, since the equivalent # commands are executed by ftp in corresponding order # # Mark Moraes ([email protected]), Feb 1, 1989 # ==> Angle brackets changed to parens, so Docbook won't get indigestion. #

# ==> These comments added by author of this document. # PATH=/local/bin:/usr/ucb:/usr/bin:/bin # export PATH # ==> Above 2 lines from original script probably superfluous. TMPFILE=/tmp/ftp.$$ # ==> Creates temp file, using process id of script ($$) # ==> to construct filename. SITE=`domainname`.toronto.edu # ==> 'domainname' similar to 'hostname' # ==> May rewrite this to parameterize this for general use. usage="Usage: $0 [h remotehost] [d remotedirectory]... [f remfile:localfile]... \

Appendix A. Contributed Scripts

392

Advanced BashScripting Guide

[c localdirectory] [m filepattern] [v]" ftpflags="i n" verbflag= set f # So we can use globbing in m set x `getopt vh:d:c:m:f: $*` if [ $? != 0 ]; then echo $usage exit 65 fi shift trap 'rm f ${TMPFILE} ; exit' 0 1 2 3 15 echo "user anonymous ${USERgnu}@${SITE} > ${TMPFILE}" # ==> Added quotes (recommended in complex echoes). echo binary >> ${TMPFILE} for i in $* # ==> Parse command line args. do case $i in v) verbflag=v; echo hash >> ${TMPFILE}; shift;; h) remhost=$2; shift 2;; d) echo cd $2 >> ${TMPFILE}; if [ x${verbflag} != x ]; then echo pwd >> ${TMPFILE}; fi; shift 2;; c) echo lcd $2 >> ${TMPFILE}; shift 2;; m) echo mget "$2" >> ${TMPFILE}; shift 2;; f) f1=`expr "$2" : "\([^:]*\).*"`; f2=`expr "$2" : "[^:]*:\(.*\)"`; echo get ${f1} ${f2} >> ${TMPFILE}; shift 2;; ) shift; break;; esac done if [ $# ne 0 ]; then echo $usage exit 65 # ==> Changed from "exit 2" to conform with standard. fi if [ x${verbflag} != x ]; then ftpflags="${ftpflags} v" fi if [ x${remhost} = x ]; then remhost=prep.ai.mit.edu # ==> Rewrite to match your favorite ftp site. fi echo quit >> ${TMPFILE} # ==> All commands saved in tempfile. ftp ${ftpflags} ${remhost} < ${TMPFILE} # ==> Now, tempfile batch processed by ftp. rm f ${TMPFILE} # ==> Finally, tempfile deleted (you may wish to copy it to a logfile).

# # # #

==> ==> ==> ==>

Exercises: 1) Add error checking. 2) Add bells & whistles.

+ Antek Sawicki contributed the following script, which makes very clever use of the parameter substitution operators discussed in Section 9.3. Appendix A. Contributed Scripts 393

Advanced BashScripting Guide Example A15. password: Generating random 8character passwords
#!/bin/bash # May need to be invoked with #!/bin/bash2 on older machines. # # Random password generator for bash 2.x by Antek Sawicki <[email protected]>, # who generously gave permission to the document author to use it here. # # ==> Comments added by document author ==>

MATRIX="0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz" LENGTH="8" # ==> May change 'LENGTH' for longer password, of course.

while [ "${n:=1}" le "$LENGTH" ] # ==> Recall that := is "default substitution" operator. # ==> So, if 'n' has not been initialized, set it to 1. do PASS="$PASS${MATRIX:$(($RANDOM%${#MATRIX})):1}" # ==> Very clever, but tricky. # ==> Starting from the innermost nesting... # ==> ${#MATRIX} returns length of array MATRIX. # ==> $RANDOM%${#MATRIX} returns random number between 1 # ==> and length of MATRIX 1. # # # # ==> ==> ==> ==> ${MATRIX:$(($RANDOM%${#MATRIX})):1} returns expansion of MATRIX at random position, by length 1. See {var:pos:len} parameter substitution in Section 3.3.1 and following examples.

# ==> PASS=... simply pastes this result onto previous PASS (concatenation). # # # # ==> To visualize this more clearly, uncomment the following line ==> echo "$PASS" ==> to see PASS being built up, ==> one character at a time, each iteration of the loop.

let n+=1 # ==> Increment 'n' for next pass. done echo "$PASS" exit 0 # ==> Or, redirect to file, as desired.

+ James R. Van Zandt contributed this script, which uses named pipes and, in his words, "really exercises quoting and escaping".

Example A16. fifo: Making daily backups, using named pipes

#!/bin/bash # ==> Script by James R. Van Zandt, and used here with his permission.

Appendix A. Contributed Scripts

394

Advanced BashScripting Guide

# ==> Comments added by author of this document.

HERE=`uname n` # ==> hostname THERE=bilbo echo "starting remote backup to $THERE at `date +%r`" # ==> `date +%r` returns time in 12hour format, i.e. "08:08:34 PM". # make sure /pipe really is a pipe and not a plain file rm rf /pipe mkfifo /pipe # ==> Create a "named pipe", named "/pipe". # ==> 'su xyz' runs commands as user "xyz". # ==> 'ssh' invokes secure shell (remote login client). su xyz c "ssh $THERE \"cat >/home/xyz/backup/${HERE}daily.tar.gz\" < /pipe"& cd / tar czf bin boot dev etc home info lib man root sbin share usr var >/pipe # ==> Uses named pipe, /pipe, to communicate between processes: # ==> 'tar/gzip' writes to /pipe and 'ssh' reads from /pipe. # ==> The end result is this backs up the main directories, from / on down. # ==> What are the advantages of a "named pipe" in this situation, # ==> as opposed to an "anonymous pipe", with |? # ==> Will an anonymous pipe even work here?

exit 0

+ Stephane Chazelas contributed the following script to demonstrate that generating prime numbers does not require arrays.

Example A17. Generating prime numbers using the modulo operator

#!/bin/bash # primes.sh: Generate prime numbers, without using arrays. # Script contributed by Stephane Chazelas. # This does *not* use the classic "Sieve of Eratosthenes" algorithm, #+ but instead uses the more intuitive method of testing each candidate number #+ for factors (divisors), using the "%" modulo operator.

LIMIT=1000 Primes() { (( n = $1 + 1 )) shift # echo "_n=$n i=$i_" if (( n == LIMIT )) then echo $* return fi

# Primes 2 1000

# Bump to next integer. # Next parameter in list.

Appendix A. Contributed Scripts

395

Advanced BashScripting Guide

for i; do # echo "n=$n i=$i" (( i * i > n )) && break (( n % i )) && continue Primes $n $@ return done Primes $n $@ $n # "i" gets set to "@", previous values of $n. # Optimization. # Sift out nonprimes using modulo operator. # Recursion inside loop.

# Recursion outside loop. # Successively accumulate positional parameters. # "$@" is the accumulating list of primes.

} Primes 1 exit 0 # Uncomment lines 17 and 25 to help figure out what is going on. # Compare the speed of this algorithm for generating primes # with the Sieve of Eratosthenes (ex68.sh). # Exercise: Rewrite this script without recursion, for faster execution.

+ Jordi Sanfeliu gave permission to use his elegant tree script.

Example A18. tree: Displaying a directory tree

#!/bin/sh # # # # # # # # # #

@(#) tree

1.1

30/11/95

by Jordi Sanfeliu email: [email protected]

Initial version: Next version : Patch by :

1.0 30/11/95 1.1 24/02/97 Now, with symbolic links Ian Kjos, to support unsearchable dirs email: [email protected]

Tree is a tool for view the directory tree (obvious :) )

# ==> 'Tree' script used here with the permission of its author, Jordi Sanfeliu. # ==> Comments added by the author of this document. # ==> Argument quoting added.

search () { for dir in `echo *` # ==> `echo *` lists all the files in current working directory, without line breaks. # ==> Similar effect to for dir in * # ==> but "dir in `echo *`" will not handle filenames with blanks. do if [ d "$dir" ] ; then # ==> If it is a directory (d)... zz=0 # ==> Temp variable, keeping track of directory level. while [ $zz != $deep ] # Keep track of inner nested loop. do echo n "| " # ==> Display vertical connector symbol, # ==> with 2 spaces & no line feed in order to indent.

Appendix A. Contributed Scripts

396

Advanced BashScripting Guide

zz=`expr $zz + 1` # ==> Increment zz. done if [ L "$dir" ] ; then # ==> If directory is a symbolic link... echo "+$dir" `ls l $dir | sed 's/^.*'$dir' //'` # ==> Display horiz. connector and list directory name, but... # ==> delete date/time part of long listing. else echo "+$dir" # ==> Display horizontal connector symbol... # ==> and print directory name. if cd "$dir" ; then # ==> If can move to subdirectory... deep=`expr $deep + 1` # ==> Increment depth. search # with recursivity ;) # ==> Function calls itself. numdirs=`expr $numdirs + 1` # ==> Increment directory count. fi fi fi done cd .. # ==> Up one directory level. if [ "$deep" ] ; then # ==> If depth = 0 (returns TRUE)... swfi=1 # ==> set flag showing that search is done. fi deep=`expr $deep 1` # ==> Decrement depth. } # Main if [ $# = 0 ] cd `pwd` else cd $1 fi echo "Initial swfi=0 # deep=0 # numdirs=0 zz=0

; then # ==> No args to script, then use current working directory. # ==> Otherwise, move to indicated directory. directory = `pwd`" ==> Search finished flag. ==> Depth of listing.

while [ "$swfi" != 1 ] # While flag not set... do search # ==> Call function after initializing variables. done echo "Total directories = $numdirs" exit 0 # ==> Challenge: try to figure out exactly how this script works.

Noah Friedman gave permission to use his string function script, which essentially reproduces some of the Clibrary string manipulation functions.

Example A19. string functions: Clike string functions

#!/bin/bash # # # # # # string.bash bash emulation of string(3) library routines Author: Noah Friedman <[email protected]> ==> Used with his kind permission in this document. Created: 19920701 Last modified: 19930929 Public domain

Appendix A. Contributed Scripts

397

Advanced BashScripting Guide

# Conversion to bash v2 syntax done by Chet Ramey # Commentary: # Code: #:docstring strcat: # Usage: strcat s1 s2 # # Strcat appends the value of variable s2 to variable s1. # # Example: # a="foo" # b="bar" # strcat a b # echo $a # => foobar # #:end docstring: ###;;;autoload ==> Autoloading of function commented out. function strcat () { local s1_val s2_val s1_val=${!1} # indirect variable expansion s2_val=${!2} eval "$1"=\'"${s1_val}${s2_val}"\' # ==> eval $1='${s1_val}${s2_val}' avoids problems, # ==> if one of the variables contains a single quote. } #:docstring strncat: # Usage: strncat s1 s2 $n # # Line strcat, but strncat appends a maximum of n characters from the value # of variable s2. It copies fewer if the value of variabl s2 is shorter # than n characters. Echoes result on stdout. # # Example: # a=foo # b=barbaz # strncat a b 3 # echo $a # => foobar # #:end docstring: ###;;;autoload function strncat () { local s1="$1" local s2="$2" local i n="$3" local s1_val s2_val s1_val=${!s1} s2_val=${!s2} if [ ${#s2_val} gt ${n} ]; then s2_val=${s2_val:0:$n} fi # ==> indirect variable expansion

# ==> substring extraction

Appendix A. Contributed Scripts

398

Advanced BashScripting Guide

eval "$s1"=\'"${s1_val}${s2_val}"\' # ==> eval $1='${s1_val}${s2_val}' avoids problems, # ==> if one of the variables contains a single quote. } #:docstring strcmp: # Usage: strcmp $s1 $s2 # # Strcmp compares its arguments and returns an integer less than, equal to, # or greater than zero, depending on whether string s1 is lexicographically # less than, equal to, or greater than string s2. #:end docstring: ###;;;autoload function strcmp () { [ "$1" = "$2" ] && return 0 [ "${1}" '<' "${2}" ] > /dev/null && return 1 return 1 } #:docstring strncmp: # Usage: strncmp $s1 $s2 $n # # Like strcmp, but makes the comparison by examining a maximum of n # characters (n less than or equal to zero yields equality). #:end docstring: ###;;;autoload function strncmp () { if [ z "${3}" o "${3}" le "0" ]; then return 0 fi if [ ${3} ge ${#1} a ${3} ge ${#2} ]; then strcmp "$1" "$2" return $? else s1=${1:0:$3} s2=${2:0:$3} strcmp $s1 $s2 return $? fi } #:docstring strlen: # Usage: strlen s # # Strlen returns the number of characters in string literal s. #:end docstring: ###;;;autoload function strlen () { eval echo "\${#${1}}" # ==> Returns the length of the value of the variable # ==> whose name is passed as an argument. }

Appendix A. Contributed Scripts

399

Advanced BashScripting Guide

#:docstring strspn: # Usage: strspn $s1 $s2 # # Strspn returns the length of the maximum initial segment of string s1, # which consists entirely of characters from string s2. #:end docstring: ###;;;autoload function strspn () { # Unsetting IFS allows whitespace to be handled as normal chars. local IFS= local result="${1%%[!${2}]*}" echo ${#result} } #:docstring strcspn: # Usage: strcspn $s1 $s2 # # Strcspn returns the length of the maximum initial segment of string s1, # which consists entirely of characters not from string s2. #:end docstring: ###;;;autoload function strcspn () { # Unsetting IFS allows whitspace to be handled as normal chars. local IFS= local result="${1%%[${2}]*}" echo ${#result} } #:docstring strstr: # Usage: strstr s1 s2 # # Strstr echoes a substring starting at the first occurrence of string s2 in # string s1, or nothing if s2 does not occur in the string. If s2 points to # a string of zero length, strstr echoes s1. #:end docstring: ###;;;autoload function strstr () { # if s2 points to a string of zero length, strstr echoes s1 [ ${#2} eq 0 ] && { echo "$1" ; return 0; } # strstr echoes nothing if s2 does not occur in s1 case "$1" in *$2*) ;; *) return 1;; esac # use the pattern matching code to strip off the match and everything # following it first=${1/$2*/} # then strip off the first unmatched portion of the string echo "${1##$first}" }

Appendix A. Contributed Scripts

400

Advanced BashScripting Guide

#:docstring strtok: # Usage: strtok s1 s2 # # Strtok considers the string s1 to consist of a sequence of zero or more # text tokens separated by spans of one or more characters from the # separator string s2. The first call (with a nonempty string s1 # specified) echoes a string consisting of the first token on stdout. The # function keeps track of its position in the string s1 between separate # calls, so that subsequent calls made with the first argument an empty # string will work through the string immediately following that token. In # this way subsequent calls will work through the string s1 until no tokens # remain. The separator string s2 may be different from call to call. # When no token remains in s1, an empty value is echoed on stdout. #:end docstring: ###;;;autoload function strtok () { : } #:docstring strtrunc: # Usage: strtrunc $n $s1 {$s2} {$...} # # Used by many functions like strncmp to truncate arguments for comparison. # Echoes the first n characters of each string s1 s2 ... on stdout. #:end docstring: ###;;;autoload function strtrunc () { n=$1 ; shift for z; do echo "${z:0:$n}" done } # provide string # string.bash ends here

# ========================================================================== # # ==> Everything below here added by the document author. # ==> Suggested use of this script is to delete everything below here, # ==> and "source" this file into your own scripts. # strcat string0=one string1=two echo echo "Testing \"strcat\" function:" echo "Original \"string0\" = $string0" echo "\"string1\" = $string1" strcat string0 string1 echo "New \"string0\" = $string0" echo # strlen echo

Appendix A. Contributed Scripts

401

Advanced BashScripting Guide

echo "Testing \"strlen\" function:" str=123456789 echo "\"str\" = $str" echo n "Length of \"str\" = " strlen str echo

# Exercise: # # Add code to test all the other string functions above.

exit 0

Michael Zick's complex array example uses the md5sum check sum command to encode directory information.

Example A20. Directory information

#! /bin/bash # directoryinfo.sh # Parses and lists directory information. # NOTE: Change lines 273 and 353 per "README" file. # Michael Zick is the author of this script. # Used here with his permission. # # # # # # # # Controls If overridden by command arguments, they must be in the order: Arg1: "Descriptor Directory" Arg2: "Exclude Paths" Arg3: "Exclude Directories" Environment Settings override Defaults. Command arguments override Environment Settings.

# Default location for content addressed file descriptors. MD5UCFS=${1:${MD5UCFS:'/tmpfs/ucfs'}} # Directory paths never to list or enter declare a \ EXCLUDE_PATHS=${2:${EXCLUDE_PATHS:'(/proc /dev /devfs /tmpfs)'}} # Directories never to list or enter declare a \ EXCLUDE_DIRS=${3:${EXCLUDE_DIRS:'(ucfs lost+found tmp wtmp)'}} # Files never to list or enter declare a \ EXCLUDE_FILES=${3:${EXCLUDE_FILES:'(core "Name with Spaces")'}}

# Here document used as a comment block. : << LSfieldsDoc # # # # # List Filesystem Directory Information # # # # # #

Appendix A. Contributed Scripts

402

Advanced BashScripting Guide

# # or # # # # # # ListDirectory "FileGlob" "FieldArrayName" ListDirectory of "FileGlob" "FieldArrayFilename" 'of' meaning 'output to filename' #

String format description based on: ls (GNU fileutils) version 4.0.36 Produces a line (or more) formatted: inode permissions hardlinks owner group ... 32736 rw 1 mszick mszick size day month date hh:mm:ss year path 2756608 Sun Apr 20 08:53:06 2003 /home/mszick/core Unless it is formatted: inode permissions hardlinks owner group ... 266705 crwrw 1 root uucp major minor day month date hh:mm:ss year path 4, 68 Sun Apr 20 09:27:33 2003 /dev/ttyS4 NOTE: that pesky comma after the major number NOTE: the 'path' may be multiple fields: /home/mszick/core /proc/982/fd/0 > /dev/null /proc/982/fd/1 > /home/mszick/.xsessionerrors /proc/982/fd/13 > /tmp/tmpfZVVOCs (deleted) /proc/982/fd/7 > /tmp/kdemszick/ksycoca /proc/982/fd/8 > socket:[11586] /proc/982/fd/9 > pipe:[11588] If that isn't enough to keep your parser guessing, either or both of the path components may be relative: ../BuiltShared > BuiltStatic ../linux2.4.20.tar.bz2 > ../../../SRCS/linux2.4.20.tar.bz2 The first character of the 11 (10?) character permissions field: 's' Socket 'd' Directory 'b' Block device 'c' Character device 'l' Symbolic link NOTE: Hard links not marked test for identical inode numbers on identical filesystems. All information about hard linked files are shared, except for the names and the name's location in the directory system. NOTE: A "Hard link" is known as a "File Alias" on some systems. '' An undistingushed file Followed by three groups of letters for: User, Group, Others Character 1: '' Not readable; 'r' Readable Character 2: '' Not writable; 'w' Writable Character 3, User and Group: Combined execute and special '' Not Executable, Not Special 'x' Executable, Not Special 's' Executable, Special 'S' Not Executable, Special Character 3, Others: Combined execute and sticky (tacky?) '' Not Executable, Not Tacky 'x' Executable, Not Tacky 't' Executable, Tacky

Appendix A. Contributed Scripts

403

Advanced BashScripting Guide

'T' Not Executable, Tacky Followed by an access indicator Haven't tested this one, it may be the eleventh character or it may generate another field ' ' No alternate access '+' Alternate access LSfieldsDoc

ListDirectory() { local a T local i of=0 # OLD_IFS=$IFS

# Default return in variable # Using BASH default ' \t\n'

case "$#" in 3) case "$1" in of) of=1 ; shift ;; * ) return 1 ;; esac ;; 2) : ;; # Poor man's "continue" *) return 1 ;; esac # NOTE: the (ls) command is NOT quoted (") T=( $(ls inode ignorebackups almostall directory \ fulltime color=none time=status sort=none \ format=long $1) ) case $of in # Assign T back to the array whose name was passed as $2 0) eval $2=\( \"\$\{T\[@\]\}\" \) ;; # Write T into filename passed as $2 1) echo "${T[@]}" > "$2" ;; esac return 0 } # # # # # Is that string a legal number? # # # # # # # IsNumber "Var" # # # # # There has to be a better way, sigh... IsNumber() { local i int if [ $# eq 0 ] then return 1 else (let int=$1) return $? fi }

2>/dev/null # Exit status of the let thread

# # # # # Index Filesystem Directory Information # # # # # # # IndexList "FieldArrayName" "IndexArrayName" # or # IndexList if FieldArrayFilename IndexArrayName # IndexList of FieldArrayName IndexArrayFilename

Appendix A. Contributed Scripts

404

Advanced BashScripting Guide

# IndexList if of FieldArrayFilename IndexArrayFilename # # # # # : << IndexListDoc Walk an array of directory fields produced by ListDirectory Having suppressed the line breaks in an otherwise line oriented report, build an index to the array element which starts each line. Each line gets two index entries, the first element of each line (inode) and the element that holds the pathname of the file. The first index entry pair (LineNumber==0) are informational: IndexArrayName[0] : Number of "Lines" indexed IndexArrayName[1] : "Current Line" pointer into IndexArrayName The following index pairs (if any) hold element indexes into the FieldArrayName per: IndexArrayName[LineNumber * 2] : The "inode" field element. NOTE: This distance may be either +11 or +12 elements. IndexArrayName[(LineNumber * 2) + 1] : The "pathname" element. NOTE: This distance may be a variable number of elements. Next line index pair for LineNumber+1. IndexListDoc

IndexList() { local local local local

a a i i

LIST i INDEX=( 0 0 ) Lidx Lcnt if=0 of=0

# Local of listname passed # Local of index to return # Default to variable names

case "$#" in # Simplistic option testing 0) return 1 ;; 1) return 1 ;; 2) : ;; # Poor man's continue 3) case "$1" in if) if=1 ;; of) of=1 ;; * ) return 1 ;; esac ; shift ;; 4) if=1 ; of=1 ; shift ; shift ;; *) return 1 esac # Make local copy of list case "$if" in 0) eval LIST=\( \"\$\{$1\[@\]\}\" \) ;; 1) LIST=( $(cat $1) ) ;; esac # Grok (grope?) the array Lcnt=${#LIST[@]} Lidx=0 until (( Lidx >= Lcnt )) do if IsNumber ${LIST[$Lidx]} then local i inode name local ft

Appendix A. Contributed Scripts

405

Advanced BashScripting Guide

inode=Lidx local m=${LIST[$Lidx+2]} # Hard Links field ft=${LIST[$Lidx+1]:0:1} # FastStat case $ft in b) ((Lidx+=12)) ;; # Block device c) ((Lidx+=12)) ;; # Character device *) ((Lidx+=11)) ;; # Anything else esac name=Lidx case $ft in ) ((Lidx+=1)) ;; # The easy one b) ((Lidx+=1)) ;; # Block device c) ((Lidx+=1)) ;; # Character device d) ((Lidx+=1)) ;; # The other easy one l) ((Lidx+=3)) ;; # At LEAST two more fields # A little more elegance here would handle pipes, #+ sockets, deleted files later. *) until IsNumber ${LIST[$Lidx]} || ((Lidx >= Lcnt)) do ((Lidx+=1)) done ;; # Not required esac INDEX[${#INDEX[*]}]=$inode INDEX[${#INDEX[*]}]=$name INDEX[0]=${INDEX[0]}+1 # One more "line" found # echo "Line: ${INDEX[0]} Type: $ft Links: $m Inode: \ # ${LIST[$inode]} Name: ${LIST[$name]}" else ((Lidx+=1)) fi done case "$of" in 0) eval $2=\( \"\$\{INDEX\[@\]\}\" \) ;; 1) echo "${INDEX[@]}" > "$2" ;; esac return 0 # What could go wrong? } # # # # # Content Identify File # # # # # # # DigestFile InputArrayName DigestArrayName # or # DigestFile if InputFileName DigestArrayName # # # # # # Here document used as a comment block. : <<DigestFilesDoc The key (no pun intended) to a Unified Content File System (UCFS) is to distinguish the files in the system based on their content. Distinguishing files by their name is just, so, 20th Century. The content is distinguished by computing a checksum of that content. This version uses the md5sum program to generate a 128 bit checksum representative of the file's contents. There is a chance that two files having different content might generate the same checksum using md5sum (or any checksum). Should that become a problem, then the use of md5sum can be replace by a cyrptographic signature. But until then...

Appendix A. Contributed Scripts

406

Advanced BashScripting Guide

The md5sum program is documented as outputting three fields (and it does), but when read it appears as two fields (array elements). This is caused by the lack of whitespace between the second and third field. So this function gropes the md5sum output and returns: [0] 32 character checksum in hexidecimal (UCFS filename) [1] Single character: ' ' text file, '*' binary file [2] Filesystem (20th Century Style) name Note: That name may be the character '' indicating STDIN read. DigestFilesDoc

DigestFile() { local if=0 local a T1 T2

# Default, variable name

case "$#" in 3) case "$1" in if) if=1 ; shift ;; * ) return 1 ;; esac ;; 2) : ;; # Poor man's "continue" *) return 1 ;; esac case $if in 0) eval T1=\( \"\$\{$1\[@\]\}\" \) T2=( $(echo ${T1[@]} | md5sum ) ) ;; 1) T2=( $(md5sum $1) ) ;; esac case ${#T2[@]} in 0) return 1 ;; 1) return 1 ;; 2) case ${T2[1]:0:1} in # SanScrit2.0.5 \*) T2[${#T2[@]}]=${T2[1]:1} T2[1]=\* ;; *) T2[${#T2[@]}]=${T2[1]} T2[1]=" " ;; esac ;; 3) : ;; # Assume it worked *) return 1 ;; esac local i len=${#T2[0]} if [ $len ne 32 ] ; then return 1 ; fi eval $2=\( \"\$\{T2\[@\]\}\" \) } # # # # # Locate File # # # # # # # LocateFile [l] FileName LocationArrayName # or # LocateFile [l] of FileName LocationArrayFileName # # # # #

Appendix A. Contributed Scripts

407

Advanced BashScripting Guide

# A file location is Filesystemid and inodenumber # Here document used as a comment block. : <<StatFieldsDoc Based on stat, version 2.2 stat t and stat lt fields [0] name [1] Total size File number of bytes Symbolic link string length of pathname [2] Number of (512 byte) blocks allocated [3] File type and Access rights (hex) [4] User ID of owner [5] Group ID of owner [6] Device number [7] Inode number [8] Number of hard links [9] Device type (if inode device) Major [10] Device type (if inode device) Minor [11] Time of last access May be disabled in 'mount' with noatime atime of files changed by exec, read, pipe, utime, mknod (mmap?) atime of directories changed by addition/deletion of files [12] Time of last modification mtime of files changed by write, truncate, utime, mknod mtime of directories changed by addtition/deletion of files [13] Time of last change ctime reflects time of changed inode information (owner, group permissions, link count ** Per: Return code: 0 Size of array: 14 Contents of array Element 0: /home/mszick Element 1: 4096 Element 2: 8 Element 3: 41e8 Element 4: 500 Element 5: 500 Element 6: 303 Element 7: 32385 Element 8: 22 Element 9: 0 Element 10: 0 Element 11: 1051221030 Element 12: 1051214068 Element 13: 1051214068 For a link in the form of linkname > realname stat t linkname returns the linkname (link) information stat lt linkname returns the realname information stat tf and stat ltf fields [0] name [1] ID0? # Maybe someday, but Linux stat structure [2] ID0? # does not have either LABEL nor UUID # fields, currently information must come # from filesystem specific utilities These will be munged into: [1] UUID if possible [2] Volume Label if possible

Appendix A. Contributed Scripts

408

Advanced BashScripting Guide

Note: 'mount l' does return the label and could return the UUID [3] [4] [5] [6] [7] [8] [9] [10] Maximum length of filenames Filesystem type Total blocks in the filesystem Free blocks Free blocks for nonroot user(s) Block size of the filesystem Total inodes Free inodes

** Per: Return code: 0 Size of array: 11 Contents of array Element 0: /home/mszick Element 1: 0 Element 2: 0 Element 3: 255 Element 4: ef53 Element 5: 2581445 Element 6: 2277180 Element 7: 2146050 Element 8: 4096 Element 9: 1311552 Element 10: 1276425 StatFieldsDoc

# #

LocateFile [l] FileName LocationArrayName LocateFile [l] of FileName LocationArrayFileName

LocateFile() { local a LOC LOC1 LOC2 local lk="" of=0 case "$#" in 0) return 1 ;; 1) return 1 ;; 2) : ;; *) while (( "$#" > 2 )) do case "$1" in l) lk=1 ;; of) of=1 ;; *) return 1 ;; esac shift done ;; esac # More Sanscrit2.0.5 # LOC1=( $(stat t $lk $1) ) # LOC2=( $(stat tf $lk $1) ) # Uncomment above two lines if system has "stat" command installed. LOC=( ${LOC1[@]:0:1} ${LOC1[@]:3:11} ${LOC2[@]:1:2} ${LOC2[@]:4:1} ) case "$of" in 0) eval $2=\( \"\$\{LOC\[@\]\}\" \) ;;

Appendix A. Contributed Scripts

409

Advanced BashScripting Guide

1) echo "${LOC[@]}" > "$2" ;; esac return 0 # Which yields (if you are lucky, and have "stat" installed) # ** Location Discriptor ** # Return code: 0 # Size of array: 15 # Contents of array # Element 0: /home/mszick 20th Century name # Element 1: 41e8 Type and Permissions # Element 2: 500 User # Element 3: 500 Group # Element 4: 303 Device # Element 5: 32385 inode # Element 6: 22 Link count # Element 7: 0 Device Major # Element 8: 0 Device Minor # Element 9: 1051224608 Last Access # Element 10: 1051214068 Last Modify # Element 11: 1051214068 Last Status # Element 12: 0 UUID (to be) # Element 13: 0 Volume Label (to be) # Element 14: ef53 Filesystem type }

# And then there was some test code ListArray() # ListArray Name { local a Ta eval Ta=\( \"\$\{$1\[@\]\}\" \) echo echo "** List of Array **" echo "Size of array $1: ${#Ta[*]}" echo "Contents of array $1:" for (( i=0 ; i<${#Ta[*]} ; i++ )) do echo e "\tElement $i: ${Ta[$i]}" done return 0 } declare a CUR_DIR # For small arrays ListDirectory "${PWD}" CUR_DIR ListArray CUR_DIR declare a DIR_DIG DigestFile CUR_DIR DIR_DIG echo "The new \"name\" (checksum) for ${CUR_DIR[9]} is ${DIR_DIG[0]}" declare a DIR_ENT # BIG_DIR # For really big arrays use a temporary file in ramdisk # BIGDIR # ListDirectory of "${CUR_DIR[11]}/*" "/tmpfs/junk2" ListDirectory "${CUR_DIR[11]}/*" DIR_ENT declare a DIR_IDX # BIGDIR # IndexList if "/tmpfs/junk2" DIR_IDX IndexList DIR_ENT DIR_IDX

Appendix A. Contributed Scripts

410

Advanced BashScripting Guide

declare a IDX_DIG # BIGDIR # DIR_ENT=( $(cat /tmpfs/junk2) ) # BIGDIR # DigestFile if /tmpfs/junk2 IDX_DIG DigestFile DIR_ENT IDX_DIG # Small (should) be able to parallize IndexList & DigestFile # Large (should) be able to parallize IndexList & DigestFile & the assignment echo "The \"name\" (checksum) for the contents of ${PWD} is ${IDX_DIG[0]}" declare a FILE_LOC LocateFile ${PWD} FILE_LOC ListArray FILE_LOC exit 0

Stephane Chazelas demonstrates objectoriented programming in a Bash script.

Example A21. Objectoriented database

#!/bin/bash # objoriented.sh: Objectoriented programming in a shell script. # Script by Stephane Chazelas.

person.new() # Looks almost like a class declaration in C++. { local obj_name=$1 name=$2 firstname=$3 birthdate=$4 eval "$obj_name.set_name() { eval \"$obj_name.get_name() { echo \$1 }\" }" eval "$obj_name.set_firstname() { eval \"$obj_name.get_firstname() { echo \$1 }\" }" eval "$obj_name.set_birthdate() { eval \"$obj_name.get_birthdate() { echo \$1 }\" eval \"$obj_name.show_birthdate() { echo \$(date d \"1/1/1970 0:0:\$1 GMT\") }\" eval \"$obj_name.get_age() { echo \$(( (\$(date +%s) \$1) / 3600 / 24 / 365 )) }\" }" $obj_name.set_name $name $obj_name.set_firstname $firstname $obj_name.set_birthdate $birthdate } echo

Appendix A. Contributed Scripts

411

Advanced BashScripting Guide

person.new self Bozeman Bozo 101272413 # Create an instance of "person.new" (actually passing args to the function). self.get_firstname self.get_name self.get_age self.get_birthdate self.show_birthdate echo # typeset f # to see the created functions (careful, it scrolls off the page). exit 0 # # # # # Bozo Bozeman 28 101272413 Sat Mar 17 20:13:33 MST 1973

Appendix A. Contributed Scripts

412

Appendix B. Reference Cards

Table B1. Special Shell Variables Variable $0 $1 $2 $9 ${10} $# $* $@ ${#*} ${#@} $? $$ $ $_ $! Meaning Name of script Positional parameter #1 Positional parameters #2 #9 Positional parameter #10 Number of positional parameters All the positional parameters (as a single word) All the positional parameters (as separate strings) Number of command line parameters passed to script Number of command line parameters passed to script Return value Process ID (PID) of script Flags passed to script (using set) Last argument of previous command Process ID (PID) of last job run in background

Table B2. TEST Operators: Binary Comparison Operator Meaning Operator String Comparison = == ! \< \> z n Arithmetic Comparison within double parentheses (( ... )) > Greater than >= Greater than or equal to < Less than <= Less than or equal to Meaning

Arithmetic Comparison eq Equal to ne lt le gt ge Not equal to Less than Less than or equal to Greater than Greater than or equal to

Equal to Equal to Not equal to Less than (ASCII) * Greater than (ASCII) * String is empty String is not empty

Appendix B. Reference Cards

413

Advanced BashScripting Guide * If within a doublebracket [[ ... ]] test construct, then no escape \ is needed.

Table B3. TEST Operators: Files Operator e f d h L b c p S t N O G Tests Whether File exists File is a regular file File is a directory File is a symbolic link File is a symbolic link File is a block device File is a character device File is a pipe File is a socket File is associated with a terminal File modified since it was last read You own the file Group id of file same as yours Operator s r w x g u k Tests Whether File is not zero size File has read permission File has write permission File has execute permission sgid flag set suid flag set "sticky bit" set

F1 nt F2 F1 ot F2 F1 ef F2

File F1 is newer than F2 * File F1 is older than F2 * Files F1 and F2 are hard links to the same file *

"NOT" (reverses sense of above tests)

* Binary operator (requires two operands).

Table B4. Parameter Substitution and Expansion Expression ${var} ${varDEFAULT} ${var:DEFAULT} ${var=DEFAULT} ${var:=DEFAULT} ${var+OTHER} ${var:+OTHER} ${var?ERR_MSG} ${var:?ERR_MSG} Meaning Value of var, same as $var If var not set, evaluate expression as $DEFAULT * If var not set, evaluate expression as $DEFAULT * If var not set, evaluate expression as $DEFAULT * If var not set, evaluate expression as $DEFAULT * If var set, evaluate expression as $OTHER, otherwise as null string If var set, evaluate expression as $OTHER, otherwise as null string If var not set, print $ERR_MSG * If var not set, print $ERR_MSG *

* Of course if var is set, evaluate the expression as $var.

Table B5. String Operations Appendix B. Reference Cards 414

Advanced BashScripting Guide Expression ${#string} {$string:position} {$string:position:length} Meaning Length of $string Extract substring from $string at $position Extract $length characters substring from $string at $position Strip shortest match of $substring from front of $string Strip longest match of $substring from front of $string Strip shortest match of $substring from back of $string Strip longest match of $substring from back of $string Replace first match of $substring with $replacement Replace all matches of $substring with $replacement If $substring matches front end of $string, substitute $replacement for $substring If $substring matches back end of $string, substitute $replacement for $substring

${string#substring} ${string##substring} ${string%substring} ${string%%substring}

${string/substring/replacement} ${string//substring/replacement} ${string/#substring/replacement} ${string/%substring/replacement}

expr match "$string" '$substring' expr "$string" : '$substring' expr index "$string" $substring

expr substr $string $position $length expr match "$string" '\($substring\)' expr "$string" : '\($substring\)' Extract $substring* at beginning of $string expr match "$string" Extract $substring* at end of $string '.*\($substring\)' expr "$string" : '.*\($substring\)' Extract $substring* at end of $string * Where $substring is a regular expression.

Length of matching $substring* at beginning of $string Length of matching $substring* at beginning of $string Numerical position in $string of first character in $substring that matches Extract $length characters from $string starting at $position Extract $substring* at beginning of $string

Appendix B. Reference Cards

415

Appendix C. A Sed and Awk MicroPrimer

This is a very brief introduction to the sed and awk text processing utilities. We will deal with only a few basic commands here, but that will suffice for understanding simple sed and awk constructs within shell scripts. sed: a noninteractive text file editor awk: a fieldoriented pattern processing language with a Clike syntax For all their differences, the two utilities share a similar invocation syntax, both use regular expressions , both read input by default from stdin, and both output to stdout. These are wellbehaved UNIX tools, and they work together well. The output from one can be piped into the other, and their combined capabilities give shell scripts some of the power of Perl. One important difference between the utilities is that while shell scripts can easily pass arguments to sed, it is more complicated for awk (see Example 343 and Example 922).

C.1. Sed
Sed is a noninteractive line editor. It receives text input, whether from stdin or from a file, performs certain operations on specified lines of the input, one line at a time, then outputs the result to stdout or to a file. Within a shell script, sed is usually one of several tool components in a pipe. Sed determines which lines of its input that it will operate on from the address range passed to it. [69] Specify this address range either by line number or by a pattern to match. For example, 3d signals sed to delete line 3 of the input, and /windows/d tells sed that you want every line of the input containing a match to "windows" deleted. Of all the operations in the sed toolkit, we will focus primarily on the three most commonly used ones. These are printing (to stdout), deletion, and substitution.

Table C1. Basic sed operators Operator [addressrange]/p [addressrange]/d s/pattern1/pattern2/ [addressrange]/s/pattern1/pattern2/ Name print delete substitute substitute Effect Print [specified address range] Delete [specified address range] Substitute pattern2 for first instance of pattern1 in a line Substitute pattern2 for first instance of pattern1 in a line, over addressrange replace any character in pattern1 with the corresponding character in pattern2, over 416

[addressrange]/y/pattern1/pattern2/

transform

Appendix C. A Sed and Awk MicroPrimer

Advanced BashScripting Guide addressrange (equivalent of tr) Operate on every pattern match within each matched line of input

global

Unless the g (global) operator is appended to a substitute command, the substitution operates only on the first instance of a pattern match within each line. From the command line and in a shell script, a sed operation may require quoting and certain options.
sed e '/^$/d' $filename # The e option causes the next string to be interpreted as an editing instruction. # (If passing only a single instruction to "sed", the "e" is optional.) # The "strong" quotes ('') protect the RE characters in the instruction #+ from reinterpretation as special characters by the body of the script. # (This reserves RE expansion of the instruction for sed.) # # Operates on the text contained in file $filename.

In certain cases, a sed editing command will not work with single quotes.
filename=file1.txt pattern=BEGIN sed "/^$pattern/d" "$filename" # Works as specified. # sed '/^$pattern/d' "$filename" has unexpected results. # In this instance, with strong quoting (' ... '), #+ "$pattern" will not expand to "BEGIN".

Sed uses the e option to specify that the following string is an instruction or set of instructions. If there is only a single instruction contained in the string, then this option may be omitted.
sed n '/xzy/p' # The n option # Otherwise all # The e option $filename tells sed to print only those lines matching the pattern. input lines would print. not necessary here since there is only a single editing instruction.

Table C2. Examples of sed operators Notation 8d /^$/d 1,/^$/d /Jones/p s/Windows/Linux/ s/BSOD/stability/g s/ *$// s/00*/0/g Effect Delete 8th line of input. Delete all blank lines. Delete from beginning of input up to, and including first blank line. Print only lines containing "Jones" (with n option). Substitute "Linux" for first instance of "Windows" found in each input line. Substitute "stability" for every instance of "BSOD" found in each input line. Delete all spaces at the end of every line. Compress all consecutive sequences of zeroes into a single zero.

Appendix C. A Sed and Awk MicroPrimer

417

Advanced BashScripting Guide /GUI/d s/GUI//g Delete all lines containing "GUI". Delete all instances of "GUI", leaving the remainder of each line intact.

Substituting a zerolength string for another is equivalent to deleting that string within a line of input. This leaves the remainder of the line intact. Applying s/GUI// to the line
The most important parts of any application are its GUI and sound effects

results in
The most important parts of any application are its and sound effects

The backslash represents a newline as a substitution character. In this special case, the replacement expression continues on the next line.
s/^ /g */\

This substitution replaces linebeginning spaces with a newline. The net result is to replace paragraph indents with a blank line between paragraphs. An address range followed by one or more operations may require open and closed curly brackets, with appropriate newlines.
/[09AZaz]/,/^$/{ /^$/d }

This deletes only the first of each set of consecutive blank lines. That might be useful for singlespacing a text file, but retaining the blank line(s) between paragraphs. A quick way to doublespace a text file is sed G filename. For illustrative examples of sed within shell scripts, see: 1. Example 341 2. Example 342 3. Example 122 4. Example A3 5. Example 1212 6. Example 1220 7. Example A13 8. Example A18 9. Example 1224 10. Example 109 11. Example 1233 12. Example A2 13. Example 1210 14. Example 128 15. Example A11 16. Example 1712 Appendix C. A Sed and Awk MicroPrimer 418

Advanced BashScripting Guide For a more extensive treatment of sed, check the appropriate references in the Bibliography.

C.2. Awk
Awk is a fullfeatured text processing language with a syntax reminiscent of C. While it possesses an extensive set of operators and capabilities, we will cover only a couple of these here the ones most useful for shell scripting. Awk breaks each line of input passed to it into fields. By default, a field is a string of consecutive characters separated by whitespace, though there are options for changing the delimiter. Awk parses and operates on each separate field. This makes awk ideal for handling structured text files, especially tables, data organized into consistent chunks, such as rows and columns. Strong quoting (single quotes) and curly brackets enclose segments of awk code within a shell script.
awk '{print $3}' $filename # Prints field #3 of file $filename to stdout. awk '{print $1 $5 $6}' $filename # Prints fields #1, #5, and #6 of file $filename.

We have just seen the awk print command in action. The only other feature of awk we need to deal with here is variables. Awk handles variables similarly to shell scripts, though a bit more flexibly.
{ total += ${column_number} }

This adds the value of column_number to the running total of "total". Finally, to print "total", there is an END command block, executed after the script has processed all its input.
END { print total }

Corresponding to the END, there is a BEGIN, for a code block to be performed before awk starts processing its input. For examples of awk within shell scripts, see: 1. Example 1110 2. Example 167 3. Example 1224 4. Example 343 5. Example 922 6. Example 1116 7. Example 281 8. Example 282 9. Example 103 10. Example 1242 11. Example 926 12. Example 123 13. Example 912 14. Example 3411 15. Example 108 Appendix C. A Sed and Awk MicroPrimer 419

Advanced BashScripting Guide That's all the awk we'll cover here, folks, but there's lots more to learn. See the appropriate references in the Bibliography.

Appendix C. A Sed and Awk MicroPrimer

420

Appendix D. Exit Codes With Special Meanings

Table D1. "Reserved" Exit Codes Exit Code Number 1 2 126 127 128 128+n 130 255* Meaning catchall for general errors Example Comments

let "var1 = 1/0" miscellaneous errors, such as "divide by zero" misuse of shell builtins, according to Seldom seen, usually defaults to exit Bash documentation code 1 command invoked cannot execute permission problem or command is not an executable "command not found" possible problem with $PATH or a typo invalid argument to exit exit 3.14159 exit takes only integer args in the range 0 255 fatal error signal "n" kill 9 $PPID $? returns 137 (128 + 9) of script script terminated by ControlC ControlC is fatal error signal 2, (130 = 128 + 2, see above) exit status out of range exit 1 exit takes only integer args in the range 0 255

According to the table, exit codes 1 2, 126 165, and 255 [70] have special meanings, and should therefore be avoided as userspecified exit parameters. Ending a script with exit 127 would certainly cause confusion when troubleshooting (is the error a "command not found" or a userdefined one?). However, many scripts use an exit 1 as a general bailout upon error. Since exit code 1 signifies so many possible errors, this might not add any additional ambiguity, but, on the other hand, it probably would not be very informative either. There has been an attempt to systematize exit status numbers (see /usr/include/sysexits.h), but this is intended for C and C++ programmers. A similar standard for scripting might be appropriate. The author of this document proposes restricting userdefined exit codes to the range 64 113 (in addition to 0, for success), to conform with the C/C++ standard. This would allot 50 valid codes, and make troubleshooting scripts more straightforward. All userdefined exit codes in the accompanying examples to this document now conform to this standard, except where overriding circumstances exist, as in Example 92. Issuing a $? from the command line after a shell script exits gives results consistent with the table above only from the Bash or sh prompt. Running the Cshell or tcsh may give different values in some cases.

Appendix D. Exit Codes With Special Meanings

421

Appendix E. A Detailed Introduction to I/O and I/O Redirection

written by Stephane Chazelas, and revised by the document author A command expects the first three file descriptors to be available. The first, fd 0 (standard input, stdin), is for reading. The other two (fd 1, stdout and fd 2, stderr) are for writing. There is a stdin, stdout, and a stderr associated with each command. ls 2>&1 means temporarily connecting the stderr of the ls command to the same "resource" as the shell's stdout. By convention, a command reads its input from fd 0 (stdin), prints normal output to fd 1 (stdout), and error ouput to fd 2 (stderr). If one of those three fd's is not open, you may encounter problems:
bash$ cat /etc/passwd >& cat: standard output: Bad file descriptor

For example, when xterm runs, it first initializes itself. Before running the user's shell, xterm opens the terminal device (/dev/pts/<n> or something similar) three times. At this point, Bash inherits these three file descriptors, and each command (child process) run by Bash inherits them in turn, except when you redirect the command. Redirection means reassigning one of the file descriptors to another file (or a pipe, or anything permissible). File descriptors may be reassigned locally (for a command, a command group, a subshell, a while or if or case or for loop...), or globally, for the remainder of the shell (using exec). ls > /dev/null means running ls with its fd 1 connected to /dev/null.
bash$ lsof a p $$ d0,1,2 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME bash 363 bozo 0u CHR 136,1 3 /dev/pts/1 bash 363 bozo 1u CHR 136,1 3 /dev/pts/1 bash 363 bozo 2u CHR 136,1 3 /dev/pts/1

bash$ exec 2> /dev/null bash$ lsof a p $$ d0,1,2 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME bash 371 bozo 0u CHR 136,1 3 /dev/pts/1 bash 371 bozo 1u CHR 136,1 3 /dev/pts/1 bash 371 bozo 2w CHR 1,3 120 /dev/null

bash$ bash c 'lsof a p $$ d0,1,2' | cat COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME lsof 379 root 0u CHR 136,1 3 /dev/pts/1 lsof 379 root 1w FIFO 0,0 7118 pipe lsof 379 root 2u CHR 136,1 3 /dev/pts/1

bash$ echo "$(bash c 'lsof a p $$ d0,1,2' 2>&1)" COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME lsof 426 root 0u CHR 136,1 3 /dev/pts/1

Appendix E. A Detailed Introduction to I/O and I/O Redirection

422

Advanced BashScripting Guide

lsof lsof 426 root 426 root 1w 2w FIFO FIFO 0,0 0,0 7520 pipe 7520 pipe

This works for different types of redirection. Exercise: Analyze the following script.
#! /usr/bin/env bash mkfifo /tmp/fifo1 /tmp/fifo2 while read a; do echo "FIFO1: $a"; done < /tmp/fifo1 & exec 7> /tmp/fifo1 exec 8> >(while read a; do echo "FD8: $a, to fd7"; done >&7)

exec 3>&1 ( ( ( while read a; do echo "FIFO2: $a"; done < /tmp/fifo2 | tee /dev/stderr | tee /dev/fd/4 | tee / exec 3> /tmp/fifo2 echo 1st, sleep 1 echo 2nd, sleep 1 echo 3rd, sleep 1 echo 4th, sleep 1 echo 5th, sleep 1 echo 6th, sleep 1 echo 7th, sleep 1 echo 8th, sleep 1 echo 9th, to stdout to stderr >&2 to fd 3 >&3 to fd 4 >&4 to fd 5 >&5 through a pipe | sed 's/.*/PIPE: &, to fd 5/' >&5 to fd 6 >&6 to fd 7 >&7 to fd 8 >&8

) 4>&1 >&3 3>& | while read a; do echo "FD4: $a"; done 1>&3 5>& 6>& ) 5>&1 >&3 | while read a; do echo "FD5: $a"; done 1>&3 6>& ) 6>&1 >&3 | while read a; do echo "FD6: $a"; done 3>& rm f /tmp/fifo1 /tmp/fifo2

# For each command and subshell, figure out which fd points to what. exit 0

Appendix E. A Detailed Introduction to I/O and I/O Redirection

423

Appendix F. Localization
Localization is an undocumented Bash feature. A localized shell script echoes its text output in the language defined as the system's locale. A Linux user in Berlin, Germany, would get script output in German, whereas his cousin in Berlin, Maryland, would get output from the same script in English. To create a localized script, use the following template to write all messages to the user (error messages, prompts, etc.).
#!/bin/bash # localized.sh E_CDERROR=65 error() { printf "$@" >&2 exit $E_CDERROR } cd $var || error $"Can't cd to %s." "$var" read p $"Enter the value: " var # ... bash$ bash D localized.sh "Can't cd to %s." "Enter the value: "

This lists all the localized text. (The D option lists doublequoted strings prefixed by a $, without executing the script.)
bash$ bash dumppostrings localized.sh #: a:6 msgid "Can't cd to %s." msgstr "" #: a:7 msgid "Enter the value: " msgstr ""

The dumppostrings option to Bash resembles the D option, but uses gettext "po" format. Now, build a language.po file for each language that the script will be translated into, specifying the msgstr. As an example: fr.po:
#: a:6 msgid "Can't cd to %s." msgstr "Impossible de se positionner dans le rpertoire %s." #: a:7 msgid "Enter the value: " msgstr "Entrez la valeur : "

Appendix F. Localization

424

Advanced BashScripting Guide Then, run msgfmt. msgfmt o localized.sh.mo fr.po Place the resulting localized.sh.mo file in the /usr/local/share/locale/fr/LC_MESSAGES directory, and at the beginning of the script, insert the lines:
TEXTDOMAINDIR=/usr/local/share/locale TEXTDOMAIN=localized.sh

If a user on a French system runs the script, she will get French messages. With older versions of Bash or other shells, localization requires gettext, using the s option. In this case, the script becomes:

#!/bin/bash # localized.sh E_CDERROR=65 error() { local format=$1 shift printf "$(gettext s "$format")" "$@" >&2 exit $E_CDERROR } cd $var || error "Can't cd to %s." "$var" read p "$(gettext s "Enter the value: ")" var # ...

The TEXTDOMAIN and TEXTDOMAINDIR variables need to be exported to the environment. This appendix written by Stephane Chazelas.

Appendix F. Localization

425

Appendix G. History Commands

The Bash shell provides commandline tools for editing and manipulating a user's command history. This is primarily a convenience, a means of saving keystrokes. Bash history commands: 1. history 2. fc
bash$ history 1 mount /mnt/cdrom 2 cd /mnt/cdrom 3 ls ...

Internal variables associated with Bash history commands: 1. $HISTCMD 2. $HISTCONTROL 3. $HISTIGNORE 4. $HISTFILE 5. $HISTFILESIZE 6. $HISTSIZE 7. !! 8. !$ 9. !# 10. !N 11. !N 12. !STRING 13. !?STRING? 14. ^STRING^string^ Unfortunately, the Bash history tools find no use in scripting.
#!/bin/bash # history.sh # Attempt to use 'history' command in a script. history # Script produces no output. # History commands do not work within a script. bash$ ./history.sh (no output)

Appendix G. History Commands

426

Appendix H. A Sample .bashrc File

The ~/.bashrc file determines the behavior of interactive shells. A good look at this file can lead to a better understanding of Bash. Emmanuel Rouat contributed the following very elaborate .bashrc file, written for a Linux system. He welcomes reader feedback on it. Study the file carefully, and feel free to reuse code snippets and functions from it in your own .bashrc file or even in your scripts.

Example H1. Sample .bashrc file

#=============================================================== # # PERSONAL $HOME/.bashrc FILE for bash2.05a (or later) # # Last modified: Tue Apr 15 20:32:34 CEST 2003 # # This file is read (normally) by interactive shells only. # Here is the place to define your aliases, functions and # other interactive features like your prompt. # # This file was designed (originally) for Solaris but based # on Redhat's default .bashrc file # > Modified for Linux. # The majority of the code you'll find here is based on code found # on Usenet (or internet). # This bashrc file is a bit overcrowded remember it is just # just an example. Tailor it to your needs # # #=============================================================== # > Comments added by HOWTO author. # > And then edited again by ER :) # # Source global definitions (if any) # if [ f /etc/bashrc ]; then . /etc/bashrc # > Read /etc/bashrc, if present. fi # # Automatic setting of $DISPLAY (if not set already) # This works for linux your mileage may vary.... # The problem is that different types of terminals give # different answers to 'who am i'...... # I have not found a 'universal' method yet # function get_xserver () { case $TERM in xterm )

Appendix H. A Sample .bashrc File

427

Advanced BashScripting Guide

XSERVER=$(who am i | awk '{print $NF}' | tr d ')''(' ) XSERVER=${XSERVER%%:*} ;; aterm | rxvt) # find some code that works here..... ;; esac } if [ z ${DISPLAY:=""} ]; then get_xserver if [[ z ${XSERVER} || ${XSERVER} == $(hostname) || ${XSERVER} == "unix" ]]; then DISPLAY=":0.0" # Display on local host else DISPLAY=${XSERVER}:0.0 # Display on remote host fi fi export DISPLAY # # Some settings # ulimit S c 0 set o notify set o noclobber set o ignoreeof set o nounset #set o xtrace # Enable shopt s shopt s shopt s shopt s shopt s shopt s shopt s shopt s shopt s shopt s # Don't want any coredumps

# useful for debuging

options: cdspell cdable_vars checkhash checkwinsize mailwarn sourcepath no_empty_cmd_completion # bash>=2.04 only cmdhist histappend histreedit histverify extglob # necessary for programmable completion

# Disable options: shopt u mailwarn unset MAILCHECK

# I don't want my shell to warn me of incoming mail

export TIMEFORMAT=$'\nreal %3R\tuser %3U\tsys %3S\tpcpu %P\n' export HISTIGNORE="&:bg:fg:ll:h" export HOSTFILE=$HOME/.hosts # Put a list of remote hosts in ~/.hosts

# # Greeting, motd etc... # # Define some colors first: red='\e[0;31m' RED='\e[1;31m' blue='\e[0;34m'

Appendix H. A Sample .bashrc File

428

Advanced BashScripting Guide

BLUE='\e[1;34m' cyan='\e[0;36m' CYAN='\e[1;36m' NC='\e[0m' # No Color # > Nice. Has the same effect as using "ansi.sys" in DOS. # Looks best on a black background..... echo e "${CYAN}This is BASH ${RED}${BASH_VERSION%.*}${CYAN} DISPLAY on ${RED}$DISPLAY${NC}\n" date if [ x /usr/games/fortune ]; then /usr/games/fortune s # makes our day a bit more fun.... :) fi function _exit() # function to run upon exit of shell { echo e "${RED}Hasta la vista, baby${NC}" } trap _exit EXIT # # Shell Prompt # if [[ "${DISPLAY#$HOST}" != ":0.0" && "${DISPLAY}" != ":0" ]]; then HILIT=${red} # remote machine: prompt will be partly red else HILIT=${cyan} # local machine: prompt will be partly cyan fi # > Replace instances of \W with \w in prompt functions below #+ > to get display of full path name. function fastprompt() { unset PROMPT_COMMAND case $TERM in *term | rxvt ) PS1="${HILIT}[\h]$NC \W > \[\033]0;\${TERM} [\u@\h] \w\007\]" ;; linux ) PS1="${HILIT}[\h]$NC \W > " ;; *) PS1="[\h] \W > " ;; esac } function powerprompt() { _powerprompt() { LOAD=$(uptime|sed e "s/.*: \([^,]*\).*/\1/" e "s/ //g") } PROMPT_COMMAND=_powerprompt case $TERM in *term | rxvt ) PS1="${HILIT}[\A \$LOAD]$NC\n[\h \#] \W > \[\033]0;\${TERM} [\u@\h] \w\007\]" ;; linux ) PS1="${HILIT}[\A \$LOAD]$NC\n[\h \#] \w > " ;; * ) PS1="[\A \$LOAD]\n[\h \#] \w > " ;; esac }

Appendix H. A Sample .bashrc File

429

Advanced BashScripting Guide

powerprompt # this is the default prompt might be slow # If too slow, use fastprompt instead....

#=============================================================== # # ALIASES AND FUNCTIONS # # Arguably, some functions defined here are quite big # (ie 'lowercase') but my workstation has 512Meg of RAM, so ..... # If you want to make this file smaller, these functions can # be converted into scripts. # # Many functions were taken (almost) straight from the bash2.04 # examples. # #=============================================================== # # Personnal Aliases # alias rm='rm i' alias cp='cp i' alias mv='mv i' # > Prevents accidentally clobbering files. alias mkdir='mkdir p' alias alias alias alias alias alias alias alias alias alias alias # The alias alias alias alias alias alias alias alias alias alias h='history' j='jobs l' r='rlogin' which='type all' ..='cd ..' path='echo e ${PATH//:/\\n}' print='/usr/bin/lp o nobanner d $LPDEST' pjet='enscript h G fCourier9 d $LPDEST' background='xv root quit max rmode 5' du='du kh' df='df kTh' 'ls' family (this assumes la='ls Al' ls='ls hF color' lx='ls lXB' lk='ls lSr' lc='ls lcr' lu='ls lur' lr='ls lR' lt='ls ltr' lm='ls al |more' tree='tree Csu'

# Assumes LPDEST is defined # Prettyprint using enscript # Put a picture in the background

you use the GNU ls) # show hidden files # add colors for filetype recognition # sort by extension # sort by size # sort by change time # sort by access time # recursive ls # sort by date # pipe through 'more' # nice alternative to 'ls'

# tailoring 'less' alias more='less' export PAGER=less export LESSCHARSET='latin1' export LESSOPEN='|/usr/bin/lesspipe.sh %s 2>&' # Use this if lesspipe.sh exists export LESS='i N w z4 g e M X F R P%t?f%f \ :stdin .?pb%pb\%:?lbLine %lb:?bbByte %bb:...' # spelling typos highly personnal :) alias xs='cd'

Appendix H. A Sample .bashrc File

430

Advanced BashScripting Guide

alias alias alias alias vf='cd' moer='more' moew='more' kk='ll'

# # a few fun ones # function xtitle () { case "$TERM" in *term | rxvt) echo n e "\033]0;$*\007" ;; *) ;; esac } # aliases... alias top='xtitle Processes on $HOST && top' alias make='xtitle Making $(basename $PWD) ; make' alias ncftp="xtitle ncFTP ; ncftp" # .. and functions function man () { for i ; do xtitle The $(basename $1|tr d .[:digit:]) manual command man F a "$i" done } function ll(){ ls l "$@"| egrep "^d" ; ls lXB "$@" 2>&| egrep v "^d|total "; } function te() # wrapper around xemacs/gnuserv { if [ "$(gnuclient batch eval t 2>&)" == "t" ]; then gnuclient q "$@"; else ( xemacs "$@" &); fi } # # File & strings related functions: # # Find a file with a pattern in name: function ff() { find . type f iname '*'$*'*' ls ; } # Find a file with pattern $1 in name and Execute $2 on it: function fe() { find . type f iname '*'$1'*' exec "${2:file}" {} \; # find pattern in a set of filesand highlight them: function fstr() { OPTIND=1 local case="" local usage="fstr: find string in files. Usage: fstr [i] \"pattern\" [\"filename pattern\"] " while getopts :it opt do case "$opt" in i) case="i " ;;

; }

Appendix H. A Sample .bashrc File

431

Advanced BashScripting Guide

*) echo "$usage"; return;; esac done shift $(( $OPTIND 1 )) if [ "$#" lt 1 ]; then echo "$usage" return; fi local SMSO=$(tput smso) local RMSO=$(tput rmso) find . type f name "${2:*}" print0 | xargs 0 grep sn ${case} "$1" 2>& | \ sed "s/$1/${SMSO}\0${RMSO}/gI" | more } function cuttail() # cut last n lines in file, 10 by default { nlines=${2:10} sed n e :a e "1,${nlines}!{P;N;D;};N;ba" $1 } function lowercase() # move filenames to lowercase { for file ; do filename=${file##*/} case "$filename" in */*) dirname==${file%/*} ;; *) dirname=.;; esac nf=$(echo $filename | tr AZ az) newname="${dirname}/${nf}" if [ "$nf" != "$filename" ]; then mv "$file" "$newname" echo "lowercase: $file > $newname" else echo "lowercase: $file not changed." fi done } function swap() # swap 2 filenames around { local TMPFILE=tmp.$$ mv "$1" $TMPFILE mv "$2" "$1" mv $TMPFILE "$2" }

# # Process/system related functions: # function my_ps() { ps $@ u $USER o pid,%cpu,%mem,bsdtime,command ; } function pp() { my_ps f | awk '!/awk/ && $0~var' var=${1:".*"} ; } # This function is roughly the same as 'killall' on linux # but has no equivalent (that I know of) on Solaris function killps() # kill by process name { local pid pname sig="TERM" # default signal if [ "$#" lt 1 ] || [ "$#" gt 2 ]; then echo "Usage: killps [SIGNAL] pattern"

Appendix H. A Sample .bashrc File

432

Advanced BashScripting Guide

return; fi if [ $# = 2 ]; then sig=$1 ; fi for pid in $(my_ps| awk '!/awk/ && $0~pat { print $1 }' pat=${!#} ) ; do pname=$(my_ps | awk '$1~var { print $5 }' var=$pid ) if ask "Kill process $pid <$pname> with signal $sig?" then kill $sig $pid fi done } function my_ip() # get IP adresses { MY_IP=$(/sbin/ifconfig ppp0 | awk '/inet/ { print $2 } ' | sed e s/addr://) MY_ISP=$(/sbin/ifconfig ppp0 | awk '/PtP/ { print $3 } ' | sed e s/PtP://) } function ii() # get current host related info { echo e "\nYou are logged on ${RED}$HOST" echo e "\nAdditionnal information:$NC " ; uname a echo e "\n${RED}Users logged on:$NC " ; w h echo e "\n${RED}Current date :$NC " ; date echo e "\n${RED}Machine stats :$NC " ; uptime echo e "\n${RED}Memory stats :$NC " ; free my_ip 2>& ; echo e "\n${RED}Local IP Address :$NC" ; echo ${MY_IP:"Not connected"} echo e "\n${RED}ISP Address :$NC" ; echo ${MY_ISP:"Not connected"} echo } # Misc utilities: function repeat() # repeat n times command { local i max max=$1; shift; for ((i=1; i <= max ; i++)); do # > Clike syntax eval "$@"; done } function ask() { echo n "$@" '[y/n] ' ; read ans case "$ans" in y*|Y*) return 0 ;; *) return 1 ;; esac } #========================================================================= # # PROGRAMMABLE COMPLETION ONLY SINCE BASH2.04 # Most are taken from the bash 2.05 documentation and from Ian McDonalds # 'Bash completion' package (http://www.caliban.org/bash/index.shtml#completion) # You will in fact need bash2.05a for some features # #========================================================================= if [ "${BASH_VERSION%.*}" \< "2.05" ]; then echo "You will need to upgrade to version 2.05 for programmable completion"

Appendix H. A Sample .bashrc File

433

Advanced BashScripting Guide

return fi shopt s extglob set +o nounset complete complete complete complete complete complete complete complete complete complete complete A A A A A A A A A A A hostname export variable enabled alias function user # necessary # otherwise some completions will fail rsh rcp telnet rlogin r ftp ping disk printenv export local readonly unset builtin alias unalias function su mail finger

helptopic help # currently same as builtins shopt shopt stopped P '%' bg job P '%' fg jobs disown mkdir rmdir o default cd

complete A directory complete A directory

# Compression complete f o default X complete f o default X complete f o default X complete f o default X complete f o default X complete f o default X complete f o default X complete f o default X # Postscript,pdf,dvi..... complete f o default X complete f o default X complete f o default X complete f o default X complete f o default X complete f o default X complete f o default X complete f o default X # Multimedia complete f o default X complete f o default X complete f o default X

'*.+(zip|ZIP)' '!*.+(zip|ZIP)' '*.+(z|Z)' '!*.+(z|Z)' '*.+(gz|GZ)' '!*.+(gz|GZ)' '*.+(bz2|BZ2)' '!*.+(bz2|BZ2)'

zip unzip compress uncompress gzip gunzip bzip2 bunzip2

'!*.ps' gs ghostview ps2pdf ps2ascii '!*.dvi' dvips dvipdf xdvi dviselect dvitype '!*.pdf' acroread pdf2ps '!*.+(pdf|ps)' gv '!*.texi*' makeinfo texi2dvi texi2html texi2pdf '!*.tex' tex latex slitex '!*.lyx' lyx '!*.+(htm*|HTM*)' lynx html2ps '!*.+(jp*g|gif|xpm|png|bmp)' xv gimp '!*.+(mp3|MP3)' mpg123 mpg321 '!*.+(ogg|OGG)' ogg123

complete f o default X '!*.pl'

perl perl5

# This is a 'universal' completion function it works when commands have # a socalled 'long options' mode , ie: 'ls all' instead of 'ls a' _get_longopts () { $1 help | sed e '//!d' e 's/.*\([^[:space:].,]*\).*/\1/'| \ grep ^"$2" |sort u ; } _longopts_func () { case "${2:*}" in *) ;;

Appendix H. A Sample .bashrc File

434

Advanced BashScripting Guide

*) esac return ;;

case "$1" in \~*) eval cmd="$1" ;; *) cmd="$1" ;; esac COMPREPLY=( $(_get_longopts ${1} ${2} ) ) } complete complete o default F _longopts_func configure bash o default F _longopts_func wget id info a2ps ls recode

_make_targets () { local mdef makef gcmd cur prev i COMPREPLY=() cur=${COMP_WORDS[COMP_CWORD]} prev=${COMP_WORDS[COMP_CWORD1]} # if prev argument is f, return possible filename completions. # we could be a little smarter here and return matches against # `makefile Makefile *.mk', whatever exists case "$prev" in *f) COMPREPLY=( $(compgen f $cur ) ); return 0;; esac # if we want an option, return the possible posix options case "$cur" in ) COMPREPLY=(e f i k n p q r S s t); return 0;; esac # make reads `makefile' before `Makefile' if [ f makefile ]; then mdef=makefile elif [ f Makefile ]; then mdef=Makefile else mdef=*.mk # local convention fi # before we scan for targets, see if a makefile name was specified # with f for (( i=0; i < ${#COMP_WORDS[@]}; i++ )); do if [[ ${COMP_WORDS[i]} == *f ]]; then eval makef=${COMP_WORDS[i+1]} # eval for tilde expansion break fi done [ z "$makef" ] && makef=$mdef # if we have a partial word to complete, restrict completions to # matches of that word if [ n "$2" ]; then gcmd='grep "^$2"' ; else gcmd=cat ; fi # if we don't want to use *.mk, we can take out the cat and use # test f $makef and input redirection COMPREPLY=( $(cat $makef 2>/dev/null | awk 'BEGIN {FS=":"} /^[^.# }

][^=]*:/ {print $1}' | tr

Appendix H. A Sample .bashrc File

435

Advanced BashScripting Guide

complete F _make_targets X '+($*|*.[cho])' make gmake pmake

# cvs(1) completion _cvs () { local cur prev COMPREPLY=() cur=${COMP_WORDS[COMP_CWORD]} prev=${COMP_WORDS[COMP_CWORD1]} if [ $COMP_CWORD eq 1 ] || [ COMPREPLY=( $( compgen W export history import log tag update' $cur )) else COMPREPLY=( $( compgen f fi return 0 } complete F _cvs cvs _killall () { local cur prev COMPREPLY=() cur=${COMP_WORDS[COMP_CWORD]} # get a list of processes (the first sed evaluation # takes care of swapped out processes, the second # takes care of getting the basename of the process) COMPREPLY=( $( /usr/bin/ps u $USER o comm | \ sed e '1,1d' e 's#[]\[]##g' e 's#^.*/##'| \ awk '{if ($0 ~ /^'$cur'/) print $0}' )) return 0 } complete F _killall killall killps "${prev:0:1}" = "" ]; then 'add admin checkout commit diff \ rdiff release remove rtag status \

$cur ))

# # # #

A metacommand completion function for commands like sudo(8), which need to first complete on a command, then complete according to that command's own completion definition currently not quite foolproof (e.g. mount and umount don't work properly), but still quite useful By Ian McDonald, modified by me.

_my_command() { local cur func cline cspec COMPREPLY=() cur=${COMP_WORDS[COMP_CWORD]} if [ $COMP_CWORD = 1 ]; then COMPREPLY=( $( compgen c $cur ) ) elif complete p ${COMP_WORDS[1]} &>/dev/null; then cspec=$( complete p ${COMP_WORDS[1]} ) if [ "${cspec%%F *}" != "${cspec}" ]; then # complete F <function> # # COMP_CWORD and COMP_WORDS() are not readonly, # so we can set them before handing off to regular

Appendix H. A Sample .bashrc File

436

Advanced BashScripting Guide

# completion routine # set current token number to 1 less than now COMP_CWORD=$(( $COMP_CWORD 1 )) # get function name func=${cspec#*F } func=${func%% *} # get current command line minus initial command cline="${COMP_LINE#$1 }" # split current command line tokens into array COMP_WORDS=( $cline ) $func $cline elif [ "${cspec#*[abcdefgjkvu]}" != "" ]; then # complete [abcdefgjkvu] #func=$( echo $cspec | sed e 's/^.*\([abcdefgjkvu]\).*$/\1/' ) func=$( echo $cspec | sed e 's/^complete//' e 's/[^ ]*$//' ) COMPREPLY=( $( eval compgen $func $cur ) ) elif [ "${cspec#*A}" != "$cspec" ]; then # complete A <type> func=${cspec#*A } func=${func%% *} COMPREPLY=( $( compgen A $func $cur ) ) fi else COMPREPLY=( $( compgen f $cur ) ) fi }

complete o default F _my_command nohup exec eval trace truss strace sotruss gdb complete o default F _my_command command type which man nice # # # # Local Variables: mode:shellscript shshell:bash End:

Appendix H. A Sample .bashrc File

437

Appendix I. Converting DOS Batch Files to Shell Scripts

Quite a number of programmers learned scripting on a PC running DOS. Even the crippled DOS batch file language allowed writing some fairly powerful scripts and applications, though they often required extensive kludges and workarounds. Occasionally, the need still arises to convert an old DOS batch file to a UNIX shell script. This is generally not difficult, as DOS batch file operators are only a limited subset of the equivalent shell scripting ones.

Table I1. Batch file keywords / variables / operators, and their shell equivalents Batch File Operator Shell Script Equivalent % $ / \ / == = !==! != | | @ set +v * * > > >> >> < < %VAR% $VAR REM # NOT ! NUL /dev/null ECHO echo ECHO. echo ECHO OFF set +v FOR %%VAR IN (LIST) DO for var in [list]; do :LABEL none (unnecessary) GOTO none (use a function) PAUSE sleep CHOICE case or select IF if IF EXIST FILENAME if [ e filename ] IF !%N==! if [ z "$N" ] CALL source or . (dot operator) COMMAND /C source or . (dot operator) SET export Meaning commandline parameter prefix command option flag directory path separator (equalto) string comparison test (not equalto) string comparison test pipe do not echo current command filename "wild card" file redirection (overwrite) file redirection (append) redirect stdin environmental variable comment negate following test "black hole" for burying command output echo (many more option in Bash) echo blank line do not echo command(s) following "for" loop label jump to another location in the script pause or wait an interval menu choice iftest test if file exists if replaceable parameter "N" not present "include" another script "include" another script (same as CALL) set an environmental variable 438

Appendix I. Converting DOS Batch Files to Shell Scripts

Advanced BashScripting Guide SHIFT SGN ERRORLEVEL CON PRN LPT1 COM1 shift lt or gt $? stdin /dev/lp0 /dev/lp0 /dev/ttyS0 left shift commandline argument list sign (of integer) exit status "console" (stdin) (generic) printer device first printer device first serial port

Batch files usually contain DOS commands. These must be translated into their UNIX equivalents in order to convert a batch file into a shell script.

Table I2. DOS commands and their UNIX equivalents DOS Command ASSIGN ATTRIB CD CHDIR CLS COMP COPY CtlC CtlZ DEL DELTREE DIR ERASE EXIT FC FIND MD MKDIR MORE MOVE PATH REN RENAME RD RMDIR SORT TIME TYPE UNIX Equivalent ln chmod cd cd clear diff, comm, cmp cp CtlC CtlD rm rm rf ls l rm exit comm, cmp grep mkdir mkdir more mv $PATH mv mv rmdir rmdir sort date cat Effect link file or directory change file permissions change directory change directory clear screen file compare file copy break (signal) EOF (endoffile) delete file(s) delete directory recursively directory listing delete file(s) exit current process file compare find strings in files make directory make directory text file paging filter move path to executables rename (move) rename (move) remove directory remove directory sort file display system time output file to stdout 439

Appendix I. Converting DOS Batch Files to Shell Scripts

Advanced BashScripting Guide XCOPY cp (extended) file copy

Virtually all UNIX and shell operators and commands have many more options and enhancements than their DOS and batch file equivalents. Many DOS batch files rely on auxiliary utilities, such as ask.com, a crippled counterpart to read. DOS supports a very limited and incompatible subset of filename wildcard expansion, recognizing only the * and ? characters. Converting a DOS batch file into a shell script is generally straightforward, and the result ofttimes reads better than the original.

Example I1. VIEWDATA.BAT: DOS Batch File

REM VIEWDATA REM INSPIRED BY AN EXAMPLE IN "DOS POWERTOOLS" REM BY PAUL SOMERSON

@ECHO OFF IF !%1==! GOTO VIEWDATA REM IF NO COMMANDLINE ARG... FIND "%1" C:\BOZO\BOOKLIST.TXT GOTO EXIT0 REM PRINT LINE WITH STRING MATCH, THEN EXIT. :VIEWDATA TYPE C:\BOZO\BOOKLIST.TXT | MORE REM SHOW ENTIRE FILE, 1 PAGE AT A TIME. :EXIT0

The script conversion is somewhat of an improvement.

Example I2. viewdata.sh: Shell Script Conversion of VIEWDATA.BAT

#!/bin/bash # Conversion of VIEWDATA.BAT to shell script. DATAFILE=/home/bozo/datafiles/bookcollection.data ARGNO=1 # @ECHO OFF Command unnecessary here. # IF !%1==! GOTO VIEWDATA # TYPE C:\MYDIR\BOOKLIST.TXT | MORE # FIND "%1" C:\MYDIR\BOOKLIST.TXT

if [ $# lt "$ARGNO" ] then less $DATAFILE else grep "$1" $DATAFILE fi exit 0

# :EXIT0

Appendix I. Converting DOS Batch Files to Shell Scripts

440

Advanced BashScripting Guide

# GOTOs, labels, smokeandmirrors, and flimflam unnecessary. # The converted script is short, sweet, and clean, # which is more than can be said for the original.

Ted Davis' Shell Scripts on the PC site has a set of comprehensive tutorials on the oldfashioned art of batch file programming. Certain of his ingenious techniques could conceivably have relevance for shell scripts.

Appendix I. Converting DOS Batch Files to Shell Scripts

441

Appendix J. Exercises
J.1. Analyzing Scripts
Examine the following script. Run it, then explain what it does. Annotate the script, then rewrite it in a more compact and elegant manner.
#!/bin/bash MAX=10000

for((nr=1; nr<$MAX; nr++)) do let "t1 = nr % 5" if [ "$t1" ne 3 ] then continue fi let "t2 = nr % 7" if [ "$t2" ne 4 ] then continue fi let "t3 = nr % 9" if [ "$t3" ne 5 ] then continue fi break done echo "Number = $nr" # What heppens when you comment out this line? Why?

exit 0

A reader sent in the following code snippet.

while read LINE do echo $LINE done < `tail f /var/log/messages`

He wished to write a script tracking changes to the system log file, /var/log/messages. Unfortunately, the above code block hangs and does nothing useful. Why? Fix this so it does work (hint: rather than redirecting the stdin of the loop, try a pipe). Appendix J. Exercises 442

Advanced BashScripting Guide Analyze Example A11, and reorganize it in a simplified and more logical style. See how many of its variables can be eliminated and try to optimize the script to speed up its execution time. Alter the script so that it accepts any ordinary ASCII text file as input for its initial "generation". The script will read the first $ROW*$COL characters, and set the occurrences of vowels as "living" cells. Hint: be sure to translate the spaces in the input file to underscore characters.

J.2. Writing Scripts

Write a script to carry out each of the following tasks. Easy Home Directory Listing Perform a recursive directory listing on the user's home directory and save the information to a file. Compress the file, have the script prompt the user to insert a floppy, then press ENTER. Finally, save the file to the floppy. Converting for loops to while and until loops Convert the for loops in Example 101 to while loops. Hint: store the data in an array and step through the array elements. Having already done the "heavy lifting", now convert the loops in the example to until loops. Changing the line spacing of a text file Write a script that reads each line of a target file, then writes the line back to stdout, but with an extra blank line following. This has the effect of doublespacing the file. Include all necessary code to check whether the script gets the necessary command line argument (a filename), and whether the specified file exists. When the script runs correctly, modify it to triplespace the target file. Finally, write a script to remove all blank lines from the target file, singlespacing it. Backwards Listing Write a script that echoes itself to stdout, but backwards. Automatically Decompressing Files Given a list of filenames as input, this script queries each target file (parsing the output of the file command) for the type of compression used on it. Then the script automatically invokes the appropriate decompression command (gunzip, bunzip2, unzip, uncompress, or whatever). If a target file is not compressed, the script emits a warning message, but takes no other action on that particular file. Unique System ID Generate a "unique" 6digit hexadecimal identifier for your computer. Do not use the flawed hostid command. Hint: md5sum /etc/passwd, then select the first 6 digits of output. Backup Archive as a "tarball" (*.tar.gz file) all the files in your home directory tree (/home/yourname) that have been modified in the last 24 hours. Hint: use find. Primes Print (to stdout) all prime numbers between 60000 and 63000. The output should be nicely formatted in columns (hint: use printf). Appendix J. Exercises 443

Advanced BashScripting Guide Lottery Numbers One type of lottery involves picking five different numbers, in the range of 1 50. Write a script that generates five pseudorandom numbers in this range, with no duplicates. The script will give the option of echoing the numbers to stdout or saving them to a file, along with the date and time the particular number set was generated. Intermediate Managing Disk Space List, one at a time, all files larger than 100K in the /home/username directory tree. Give the user the option to delete or compress the file, then proceed to show the next one. Write to a logfile the names of all deleted files and the deletion times. Safe Delete Write, as a script, a "safe" delete command, srm.sh. Filenames passed as commandline arguments to this script are not deleted, but instead gzipped if not already compressed (use file to check), then moved to a /home/username/trash directory. At invocation, the script checks the "trash" directory for files older than 48 hours and deletes them. Making Change What is the most efficient way to make change for $1.68, using only coins in common circulations (up to 25c)? It's 6 quarters, 1 dime, a nickel, and three cents. Given any arbitrary command line input in dollars and cents ($*.??), calculate the change, using the minimum number of coins. If your home country is not the United States, you may use your local currency units instead. The script will need to parse the command line input, then change it to multiples of the smallest monetary unit (cents or whatever). Hint: look at Example 234. Quadratic Equations Solve a "quadratic" equation of the form Ax^2 + Bx + C = 0. Have a script take as arguments the coefficients, A, B, and C, and return the solutions to four decimal places. Hint: pipe the coefficients to bc, using the wellknown formula, x = ( B +/ sqrt( B^2 4AC ) ) / 2A. Sum of Matching Numbers Find the sum of all fivedigit numbers (in the range 10000 99999) containing exactly two out of the following set of digits: { 4, 5, 6 }. These may repeat within the same number, and if so, they count once for each occurrence. Some examples of matching numbers are 42057, 74638, and 89515. Lucky Numbers A "lucky number" is one whose individual digits add up to 7, in successive additions. For example, 62431 is a "lucky number" (6 + 2 + 4 + 3 + 1 = 16, 1 + 6 = 7). Find all the "lucky numbers" between 1000 and 10000. Alphabetizing a String Alphabetize (in ASCII order) an arbitrary string read from the command line. Parsing Parse /etc/passwd, and output its contents in nice, easytoread tabular form. PrettyPrinting a Data File Certain database and spreadsheet packages use savefiles with commaseparated values (CSVs). Other applications often need to parse these files. Given a data file with commaseparated fields, of the form:

Appendix J. Exercises

444

Advanced BashScripting Guide

Jones,Bill,235 S. Williams St.,Denver,CO,80221,(303) 2447989 Smith,Tom,404 Polk Ave.,Los Angeles,CA,90003,(213) 8795612 ...

Reformat the data and print it out to stdout in labeled, evenlyspaced columns. Justification Given ASCII text input either from stdin or a file, by adjusting the word spacing rightjustify each line to a userspecified linewidth and send the output to stdout. Mailing List Using the mail command, write a script that manages a simple mailing list. The script automatically emails the monthly company newsletter, read from a specified text file, and sends it to all the addresses on the mailing list, which the script reads from another specified file. Passwords Generate pseudorandom 8character passwords, using characters in the ranges [09], [AZ], [az]. Each password must contain at least two digits. Difficult Logging File Accesses Log all accesses to the files in /etc during the course of a single day. This information should include the filename, user name, and access time. If any alterations to the files take place, that should be flagged. Write this data as neatly formatted records in a logfile. Strip Comments Strip all comments from a shell script whose name is specified on the command line. Note that the "#! line" must not be stripped out. HTML Conversion Convert a given text file to HTML. This noninteractive script automatically inserts all appropriate HTML tags into a file specified as an argument. Strip HTML Tags Strip all HTML tags from a specified HTML file, then reformat it into lines between 60 and 75 characters in length. Reset paragraph and block spacing, as appropriate, and convert HTML tables to their approximate text equivalent. XML Conversion Convert an XML file to both HTML and text format. Chasing Spammers Write a script that analyzes a spam email by doing DNS lookups on the IP addresses in the headers to identify the relay hosts as well as the originating ISP. The script will forward the unaltered spam message to the responsible ISPs. Of course, it will be necessary to filter out your own ISP's IP address, so you don't end up complaining about yourself. As necessary, use the appropriate network analysis commands. Morse Code Convert a text file to Morse code. Each character of the text file will be represented as a corresponding Morse code group of dots and dashes (underscores), separated by whitespace from the next. For example, "script" ===> "... _._. ._. .. .__. _". Hex Dump Do a hex(adecimal) dump on a binary file specified as an argument. The output should be in neat tabular fields, with the first field showing the address, each of the next 8 fields a 4byte hex number, and the final field the ASCII equivalent of the previous 8 fields. Emulating a Shift Register

Appendix J. Exercises

445

Advanced BashScripting Guide Using Example 269 as an inspiration, write a script that emulates a 64bit shift register as an array. Implement functions to load the register, shift left, and shift right. Finally, write a function that interprets the register contents as eight 8bit ASCII characters. Determinant Solve a 4 x 4 determinant. Hidden Words Write a "wordfind" puzzle generator, a script that hides 10 input words in a 10 x 10 matrix of random letters. The words may be hidden across, down, or diagonally. Anagramming Anagram 4letter input. For example, the anagrams of word are: do or rod row word. You may use /usr/share/dict/linux.words as the reference list. Fog Index The "fog index" of a passage of text estimates its reading difficulty, as a number corresponding roughly to a school grade level. For example, a passage with a fog index of 12 should be comprehensible to anyone with 12 years of schooling. The Gunning version of the fog index uses the following algorithm. 1. Choose a section of the text at least 100 words in length. 2. Count the number of sentences (a portion of a sentence truncated by the boundary of the text section counts as one). 3. Find the average number of words per sentence. AVE_WDS_SEN = TOTAL_WORDS / SENTENCES 4. Count the number of "difficult" words in the segment those containing at least 3 syllables. Divide this quantity by total words to get the proportion of difficult words. PRO_DIFF_WORDS = LONG_WORDS / TOTAL_WORDS 5. The Gunning fog index is the sum of the above two quantities, multiplied by 0.4, then rounded to the nearest integer. G_FOG_INDEX = int ( 0.4 * ( AVE_WDS_SEN + PRO_DIFF_WORDS ) ) Step 4 is by far the most difficult portion of the exercise. There exist various algorithms for estimating the syllable count of a word. A ruleofthumb formula might consider the number of letters in a word and the vowelconsonant mix. A strict interpretation of the Gunning Fog index does not count compound words and proper nouns as "difficult" words, but this would enormously complicate the script. Calculating PI using Buffon's Needle The Eighteenth Century French mathematician de Buffon came up with a novel experiment. Repeatedly drop a needle of length "n" onto a wooden floor composed of long and narrow parallel boards. The cracks separating the equalwidth floorboards are a fixed distance "d" apart. Keep track of the total drops and the number of times the needle intersects a crack on the floor. The ratio of these two quantities turns out to be a fractional multiple of PI. In the spirit of Example 1235, write a script that runs a Monte Carlo simulation of Buffon's Needle. To simplify matters, set the needle length equal to the distance between the cracks, n = d. Hint: there are actually two critical variables: the distance from the center of the needle to the nearest crack to it, and the angle of the needle to that crack. You may use bc to handle the calculations. Playfair Cipher Appendix J. Exercises 446

Advanced BashScripting Guide Implement the Playfair (Wheatstone) Cipher in a script. The Playfair Cipher encrypts text by substitution of each 2letter "digram" (grouping). Traditionally, one would use a 5 x 5 letter scrambled alphabet code key square for the encryption and decryption.
C A I P V O B K Q W D F L R X E G M T Y S H N U Z

Each letter of the alphabet appears once, except "I" also represents "J". The arbitrarily chosen key word, "CODES" comes first, then all the rest of the alphabet, skipping letters already used. To encrypt, separate the plaintext message into digrams (2letter groups). If a group has two identical letters, delete the second, and form a new group. If there is a single letter left over at the end, insert a "null" character, typically an "X". THIS IS A TOP SECRET MESSAGE TH IS IS AT OP SE CR ET ME SA GE For each digram, there are three possibilities. 1) Both letters will be on the same row of the key square For each letter, substitute the one immediately to the right, in that row. If necessary, wrap around left to the beginning of the row. or 2) Both letters will be in the same column of the key square For each letter, substitute the one immediately below it, in that row. If necessary, wrap around to the top of the column. or 3) Both letters will form the corners of a rectangle within the key square. For each letter, substitute the one on the other corner the rectangle which lies on the same row.

The "TH" digram falls under case #3. G H M N T U (Rectangle with "T" and "H" at corners) T > U H > G

The "SE" digram falls under case #1. C O D E S (Row containing "S" and "E") S > C E > S (wraps around left to beginning of row)

========================================================================= To decrypt encrypted text, reverse the above procedure under cases #1

Appendix J. Exercises

447

Advanced BashScripting Guide

and #2 (move in opposite direction for substitution). Under case #3, just take the remaining two corners of the rectangle.

Helen Fouche Gaines' classic work, "Elementary Cryptoanalysis" (1939), gives a fairly detailed rundown on the Playfair Cipher and its solution methods.

This script will have three main sections I. Generating the "key square", based on a userinput keyword. II. Encrypting a "plaintext" message. III. Decrypting encrypted text. The script will make extensive use of arrays and functions. Please do not send the author your solutions to these exercises. There are better ways to impress him with your cleverness, such as submitting bugfixes and suggestions for improving this book.

Appendix J. Exercises

448

Appendix K. Copyright
The "Advanced BashScripting Guide" is copyright 2000, by Mendel Cooper. The author also asserts copyright on all previous versions of this document. This document may only be distributed subject to the terms and conditions set forth in the Open Publication License (version 1.0 or later), http://www.opencontent.org/openpub/. The following license options also apply.
A. Distribution of substantively modified versions of this document is prohibited without the explicit permission of the copyright holder. Distribution of the work or derivative of the work in any standard (paper) book form is prohibited unless prior permission is obtained from the copyright holder.

B.

Provision A, above, explicitly prohibits relabeling this document. An example of relabeling is the insertion of company logos or navigation bars into the cover, title page, or the text. The author grants the following exemptions. 1. Nonprofit organizations, such as the Linux Documentation Project and Sunsite. 2. "Pureplay" Linux distributors, such as Debian, Red Hat, Mandrake, and others. Without explicit written permission from the author, distributors and publishers (including online publishers) are prohibited from imposing any additional conditions, strictures, or provisions on this document or any previous version of it. As of this update, the author asserts that he has not entered into any contractual obligations that would alter the foregoing declarations. Essentially, you may freely distribute this book in unaltered electronic form. You must obtain the author's permission to distribute a substantially modified version or derivative work. The purpose of this restriction is to preserve the artistic integrity of this document and to prevent "forking". If you display or distribute this document or any previous version thereof under any license except the one above, then you are required to obtain the author's written permission. Failure to do so may terminate your distribution rights. These are very liberal terms, and they should not hinder any legitimate distribution or use of this book. The author especially encourages the use of this book for classroom and instructional purposes. The commercial print and other rights to this book are available. Please contact the author if interested. The author produced this book in a manner consistent with the spirit of the LDP Manifesto.

Linux is a trademark registered to Linus Torvalds. Unix and UNIX are trademarks registered to the Open Group. MS Windows is a trademark registered to the Microsoft Corp.

Appendix K. Copyright

449

Advanced BashScripting Guide All other commercial trademarks mentioned in the body of this work are registered to their respective owners. Hyun Jin Cha has done a Korean translation of version 1.0.11 of this book. Spanish, Portuguese, French, German, Italian, and Chinese translations are underway. If you wish to translate this document into another language, please feel free to do so, subject to the terms stated above. The author wishes to be notified of such efforts. Notes [1] [2] [3] [4] [5] These are referred to as builtins, features internal to the shell. Many of the features of ksh88, and even a few from the updated ksh93 have been merged into Bash. By convention, userwritten shell scripts that are Bourne shell compliant generally take a name with a .sh extension. System scripts, such as those found in /etc/rc.d, do not follow this guideline. Some flavors of UNIX (those based on 4.2BSD) take a fourbyte magic number, requiring a blank after the ! #! /bin/sh. The #! line in a shell script will be the first thing the command interpreter (sh or bash) sees. Since this line begins with a #, it will be correctly interpreted as a comment when the command interpreter finally executes the script. The line has already served its purpose calling the command interpreter. If, in fact, the script includes an extra #! line, then bash will interpret it as a comment.
#!/bin/bash echo "Part 1 of script." a=1 #!/bin/bash # This does *not* launch a new script. echo "Part 2 of script." echo $a # Value of $a stays at 1.

[6]

This allows some cute tricks.

#!/bin/rm # Selfdeleting script. # Nothing much seems to happen when you run this... except that the file disappears. WHATEVER=65 echo "This line will never print (betcha!)." exit $WHATEVER # Doesn't matter. The script will not exit here.

[7] [8] [9]

Also, try starting a README file with a #!/bin/more, and making it executable. The result is a selflisting documentation file. Portable Operating System Interface, an attempt to standardize UNIXlike OSes. Caution: invoking a Bash script by sh scriptname turns off Bashspecific extensions, and the script may therefore fail to execute. A script needs read, as well as execute permission for it to run, since the shell needs to be able to read 450

Appendix K. Copyright

Advanced BashScripting Guide it. [10] Why not simply invoke the script with scriptname? If the directory you are in ($PWD) is where scriptname is located, why doesn't this work? This fails because, for security reasons, the current directory, "." is not included in a user's $PATH. It is therefore necessary to explicitly invoke the script in the current directory with a ./scriptname. [11] The shell does the brace expansion. The command itself acts upon the result of the expansion. [12] Exception: a code block in braces as part of a pipe may be run as a subshell.
ls | { read firstline; read secondline; } # Error. The code block in braces runs as a subshell, # so the output of "ls" cannot be passed to variables within the block. echo "First line is $firstline; second line is $secondline" # Will not work. # Thanks, S.C.

[13] The process calling the script sets the $0 parameter. By convention, this parameter is the name of the script. See the manpage for execv. [14] Encapsulating "!" within double quotes gives an error when used from the command line. Apparently this is interpreted as a history command. Within a script, though, this problem does not occur. Of more concern is the inconsistent behavior of "\" within double quotes.
bash$ echo hello\! hello!

bash$ echo "hello\!" hello\!

bash$ echo e x\ty xty

bash$ echo e "x\ty" x y

[15] [16] [17] [18]

[19] [20] [21]

(Thank you, Wayne Pollock, for pointing this out.) "Word splitting", in this context, means dividing a character string into a number of separate and discrete arguments. Be aware that suid binaries may open security holes and that the suid flag has no effect on shell scripts. On modern UNIX systems, the sticky bit is no longer used for files, only on directories. As S.C. points out, in a compound test, even quoting the string variable might not suffice. [ n "$string" o "$a" = "$b" ] may cause an error with some versions of Bash if $string is empty. The safe way is to append an extra character to possibly empty variables, [ "x$string" != x o "x$a" = "x$b" ] (the "x's" cancel out). The pid of the currently running script is $$, of course. The words "argument" and "parameter" are often used interchangeably. In the context of this document, they have the same precise meaning, that of a variable passed to a script or function. This applies to either command line arguments or parameters passed to a function. 451

Appendix K. Copyright

Advanced BashScripting Guide [22] If $parameter is null in a noninteractive script, it will terminate with a 127 exit status (the Bash error code code for "command not found"). [23] These are shell builtins, whereas other loop commands, such as while and case, are keywords. [24] An exception to this is the time command, listed in the official Bash documentation as a keyword. [25] A option is an argument that acts as a flag, switching script behaviors on or off. The argument associated with a particular option indicates the behavior that the option (flag) switches on or off. [26] The C source for a number of loadable builtins is typically found in the /usr/share/doc/bash?.??/functions directory. Note that the f option to enable is not portable to all systems. The same effect as autoload can be achieved with typeset fu. These are files whose names begin with a dot, such as ~/.Xdefaults. Such filenames do not show up in a normal ls listing, and they cannot be deleted by an accidental rm rf *. Dotfiles are generally used as setup and configuration files in a user's home directory. This is only true of the GNU version of tr, not the generic version often found on commercial UNIX systems. A tar czvf archive_name.tar.gz * will include dotfiles in directories below the current working directory. This is an undocumented GNU tar "feature". This is a symmetric block cipher, used to encrypt files on a single system or local network, as opposed to the "public key" cipher class, of which pgp is a wellknown example. A daemon is a background process not attached to a terminal session. Daemons perform designated services either at specified times or explicitly triggered by certain events. The word "daemon" means ghost in Greek, and there is certainly something mysterious, almost supernatural, about the way UNIX daemons silently wander about behind the scenes, carrying out their appointed tasks. This is actually a script adapted from the Debian Linux distribution. The print queue is the group of jobs "waiting in line" to be printed. For an excellent overview of this topic, see Andy Vaught's article, Introduction to Named Pipes, in the September, 1997 issue of Linux Journal. EBCDIC (pronounced "ebbsidic") is an acronym for Extended Binary Coded Decimal Interchange Code. This is an IBM data format no longer in much use. A bizarre application of the conv=ebcdic option of dd is as a quick 'n easy, but not very secure text file encoder.
cat $file | dd conv=swab,ebcdic > $file_encrypted # Encode (looks like gibberish). # Might as well switch bytes (swab), too, for a little extra obscurity. cat $file_encrypted | dd conv=swab,ascii > $file_plaintext # Decode.

[27] [28]

[29] [30] [31] [32]

[33] [34] [35] [36]

[37] A macro is a symbolic constant that expands into a command string or a set of operations on parameters. [38] This is the case on a Linux machine or a UNIX system with disk quotas. [39] The userdel command will fail if the particular user being deleted is still logged on. [40] For more detail on burning CDRs, see Alex Withers' article, Creating CDs, in the October, 1999 issue of Linux Journal.

Appendix K. Copyright

452

Advanced BashScripting Guide [41] [42] [43] [44] [45] [46] The c option to mke2fs also invokes a check for bad blocks. Operators of singleuser Linux systems generally prefer something simpler for backups, such as tar. NAND is the logical "notand" operator. Its effect is somewhat similar to subtraction. For purposes of command substitution, a command may be an external system command, an internal scripting builtin, or even a script function. A file descriptor is simply a number that the operating system assigns to an open file to keep track of it. Consider it a simplified version of a file pointer. It is analogous to a file handle in C. Using file descriptor 5 might cause problems. When Bash creates a child process, as with exec, the child inherits fd 5 (see Chet Ramey's archived email, SUBJECT: RE: File descriptor 5 is held open). Best leave this particular fd alone. The simplest type of Regular Expression is a character string that retains its literal meaning, not containing any metacharacters. Since sed, awk, and grep process single lines, there will usually not be a newline to match. In those cases where there is a newline in a multiple line expression, the dot will match the newline.
#!/bin/bash sed e 'N;s/.*/[&]/' << EOF line1 line2 EOF # OUTPUT: # [line1 # line2] # Here Document

[47] [48]

echo awk '{ $0=$1 "\n" $2; if (/line.1/) {print}}' << EOF line 1 line 2 EOF # OUTPUT: # line # 1

# Thanks, S.C. exit 0

[49] Filename expansion can match dotfiles, but only if the pattern explicitly includes the dot.
~/[.]bashrc ~/?bashrc # Will not expand to ~/.bashrc # Neither will this. # Wild cards and metacharacters will not expand to a dot in globbing. # Will expand to ~./bashrc # Likewise. # Likewise.

~/.[b]ashrc ~/.ba?hrc ~/.bashr*

# Setting the "dotglob" option turns this off. # Thanks, S.C.

[50] Appendix K. Copyright 453

Advanced BashScripting Guide This has the same effect as a named pipe (temp file), and, in fact, named pipes were at one time used in process substitution. [51] Indirect variable references (see Example 352) provide a clumsy sort of mechanism for passing variable pointers to functions.
#!/bin/bash ITERATIONS=3 icount=1 # How many times to get input.

my_read () { # Called with my_read varname, # outputs the previous value between brackets as the default value, # then asks for a new value. local local_var echo eval read [ n n "Enter a value " 'echo n "[$'$1'] "' # Previous value. local_var "$local_var" ] && eval $1=\$local_var

# "Andlist": if "local_var" then set "$1" to its value. } echo while [ "$icount" le "$ITERATIONS" ] do my_read var echo "Entry #$icount = $var" let "icount += 1" echo done

# Thanks to Stephane Chazelas for providing this instructive example. exit 0

[52] The return command is a Bash builtin. [53] Herbert Mayer defines recursion as "...expressing an algorithm by using a simpler version of that same algorithm..." A recursive function is one that calls itself. [54] Too many levels of recursion may crash a script with a segfault.
#!/bin/bash recursive_function () { (( $1 < $2 )) && f $(( $1 + 1 )) $2; # As long as 1st parameter is less than 2nd, #+ increment 1st and recurse. } recursive_function 1 50000 # Segfaults, of course. # Recurse 50,000 levels!

# Recursion this deep might cause even a C program to segfault, #+ by using up all the memory allotted to the stack.

Appendix K. Copyright

454

Advanced BashScripting Guide

# Thanks, S.C. exit 0 # This script will not exit normally.

[55] However, aliases do seem to expand positional parameters. [56] This does not apply to csh, tcsh, and other shells not related to or descended from the classic Bourne shell (sh). [57] The entries in /dev provide mount points for physical and virtual devices. These entries use very little drive space. Some devices, such as /dev/null, /dev/zero, and /dev/urandom are virtual. They are not actual physical devices and exist only in software. A block device reads and/or writes data in chunks, or blocks, in contrast to a character device, which acesses data in character units. Examples of block devices are a hard drive and CD ROM drive. An example of a character device is a keyboard. Certain system commands, such as procinfo, free, vmstat, lsdev, and uptime do this as well. Rocky Bernstein's Bash debugger partially makes up for this lack. By convention, signal 0 is assigned to exit. Setting the suid permission on the script itself has no effect. In this context, " magic numbers" have an entirely different meaning than the magic numbers used to designate file types. ANSI is, of course, the acronym for the American National Standards Institute. See Marius van Oers' article, Unix Shell Scripting Malware, and also the Denning reference in the bibliography. Chet Ramey promises associative arrays (a Perl feature) in a future Bash release. This is the notorious "flog it to death" technique. Those who can, do. Those who can't... get an MCSE. If no address range is specified, the default is all lines. Out of range exit values can result in unpredictable exit codes. For example, exit 3809 gives an exit code of 225.

[58]

[59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70]

Appendix K. Copyright

455