Scribd
Upload
10 views1 page

Welder's Qualification Test Certificate: Mana Ebtekar Mehr Iranian

Ebrahim Mohammad Poor has been certified as a welder under ISO 9606-1 standards following a qualification test conducted on 08/31/2024. The certification includes successful visual and fracture tests, confirming compliance with ISO 5817 Quality Level B. The qualification is valid until 08/31/2026, covering specific welding processes and materials.

Uploaded by

mmmeshki
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
10 views1 page

Welder's Qualification Test Certificate: Mana Ebtekar Mehr Iranian

Ebrahim Mohammad Poor has been certified as a welder under ISO 9606-1 standards following a qualification test conducted on 08/31/2024. The certification includes successful visual and fracture tests, confirming compliance with ISO 5817 Quality Level B. The qualification is valid until 08/31/2026, covering specific welding processes and materials.

Uploaded by

mmmeshki
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

MANA EBTEKAR

MEHR IRANIAN
Welder’s Qualification Test Certificate
Designation ISO 9606-1, 141, P, FW, FM5, S, t5, PF, sl

Welder's name Ebrahim Mohammad Poor Test date 08/31/2024


ID Number 2050059639 WPQ record number -

Date of birth 07/06/1987 Standard test number ISO 9606-1

Stamp number IW140360 pWPS record number M-F-SS-201


Company name Mana Ebtekar Mehr Iranian Qualification code ISO 9606-1
Division - Examining body Alireza Ahmadi
Job knowledge Not Tested Reference no 00/ IW140360
Expiry date 08/31/2026
BASE METALS
Product form Specification (type or grade) P-no Grp-no sch. Thick. (mm) Dia(mm)
Plate SS316L 8.1 - - 5 -
Welded to: Plate SS316L 8.1 - - 5 -
Joint type
VARIABLES Actual values RANGE QUALIFIED
Type of weld joint Plate-Fillet P, T (See 5.3), Fillet
Base metal 8.1 to 8.1 All FM5: Stainless and heat-resisting steels
BASE METAL THICKNESS Butt Fillet Butt Fillet
Plate thickness (mm) 4 - ≥3
Pipe/tube thickness (mm) 4 - ≥3
Pipe diameter (mm) - -
VARIABLES Actual values RANGE QUALIFIED
Welding process 141(TIG) 141(TIG)
Type Manual Manual
Backing sl sl
Filler metal type/designation S, (ER316L) S, M, nm
Filler metal F- number
Filler metal specification
Weld deposit thickness (mm) 4 ≥3
Weld position
PF
PA & PF

Shielding gas/flux ISO 14175-I1 ISO 14175-I1


Consumable type S (Solid Wire) S (Solid Wire)
Backing gas - -
GTAW welding current/polarity DCEN DCEN
Progression - -

TESTS
Type of test Acceptance criteria Result comments

ISO 5817 Quality Level B


Visual testing according to ISO 17637 Acceptable -
ISO 17637 & ISO 5817
Fracture test per ISO 9017 Acceptable -
Quality Level B

Notes

CERTIFICATION
Tests conducted by Laboratory test number FT/1403/WQ/50
-
Mechanical tests by Test file number
We certify that the statements in this record are correct and that the test coupons were prepared welded and tested in accordance with the requirements of ISO 9606-1
Examiner (International Welding Engineer)
Name Signature & Stamp

Alireza Ahmadi

Date

1403/09/25

You might also like