91-417* (revised 09/04)

Questions regarding this form

should be directed to one of the
following:
East: 732-390-8480 (NJ)
West: 503-434-5964 (OR)
E-mail: [email protected]

HEAVY DUTY FILTER AND COALESCING FILTER

Installation Instructions, Operating Instructions and Parts List

Application:
The Heavy Duty Series Filter is designed to provide lasting
service and superior performance in today's demanding
industrial environment. A wide variety of options and
accessories make this filter adaptable to any application.

Options and Accessories:

Options*: Suffix
Automatic Drain . . . . . . . . . . . . . . . . . . . . . . . . .D
20 micron Element . . . . . . . . . . . . . . . . . . . . . .F
12 micron Element . . . . . . . . . . . . . . . . . . . . . .X
Bowl Guard (for 1/4", 3/8" and 1/2" units) . . . . .R
Metal Bowl with sightglass . . . . . . . . . . . . . . . .M
*Add a dash followed by the suffix(es) in
alphabetical order to the model number.
Accessories: Model No.
Automatic Drain Valves –
Internal* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8851AD
External (requires 4 1/2" clearance below bowl)8861
Metal Bowl with Sightglass –
1/4" and 3/8" . . . . . . . . . . . . . . . . . . . . . . . . . . .8823-41M
Technical Data:
1/2" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8824-41M Maximum Supply Pressure:
3/4" and 1" . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8828-41M Plastic Bowl . . . . . . . . . . . . . . . . 150 PSI
*Internal Automatic Drain (8851AD - suffix "D") does not fit in Metal Bowl . . . . . . . . . . . . . . . . . 250 PSI
1/2", 3/4" and 1" coalescing filter units. These units must use
Maximum Operating Temperature:
an External Drain (8861).
Plastic Bowl . . . . . . . . . . . . . . . . 120° F
Metal Bowl . . . . . . . . . . . . . . . . . 250° F
Filter Element:
Filter Performance Drop Vs. Standard . . . . . . . . . . . . . . . . . . . 40 micron
Air Flow Characteristics: Option. . . . . . . . . . . . . . . . . . . . . 20 micron
Option. . . . . . . . . . . . . . . . . . . . . 12 micron
Material:
Body . . . . . . . . . . . . . . . . . . . . . . Die cast aluminum
Standard Bowl . . . . . . . . . . . . . . Transparent polycarbonate
Bowl Guard . . . . . . . . . . . . . . . . Steel
Optional Bowl . . . . . . . . . . . . . . . Aluminum with polycarbonate
sightglass
Filter Element . . . . . . . . . . . . . . . Sintered bronze
Dimensions and Weights:
1/4" and 3/8" 1/2" 3/4" and 1"
Height . . . . . . . . . . . . . . .6" . . . . . . . . . 7" . . . . . . . . . .9"
Width . . . . . . . . . . . . . . . .3" . . . . . . . . . 3 1/2" . . . . . . .5"
Weight . . . . . . . . . . . . . . .3/4 lb. . . . . . 1" lb. . . . . . . . .4 lbs.
 Cleaning and Maintenance:
It is necessary to keep the filter clean in order to sustain peak filtering efficiency
and avoid excessive pressure drop. A coating of dirt or condensation build-up on
1
filter element or pressure drop of 10 PSID or more indicates that cleaning is
required. Please note: the Coalescing Element is NOT cleanable.
Removal of the filter from the line for cleaning is not necessary. Disassembly
2 requires no tools and the filter and the filter element should be removed from the
unit as follows.
3 Air supply must be shut off and the filter must be depressurized prior to
disassembly. Depress the safety tab on the clamping ring and, by rotating it
4A.1, slightly and pulling downward, the clamp is removed from the head of the unit.
The bowl can then be separated from the unit with slight downward force.
4A.2,
4B Unscrew the retainer baffle from the stem and remove the filter element. The
4A.3 filter element should be washed in kerosene or soapy water and dried by blowing
compressed air from the inside outward. All other parts should be cleaned with
nothing stronger than household detergent. The body should be blown out to
5 remove any remaining debris prior to reassembly. Replace the filter element and
reassemble the unit.
To drain off any accumulations in the bowl, the draincock is opened by turning it
in a clockwise direction. This should be done before the collected fluid reaches
the lower baffle.
6.1

6.2
Components:
Item
No. Description 1/4" 3/8" 1/2" 3/4" 1"
1 Head 8822-1 8823-1 8824-1 8826-1 8828-1
2 Bowl O-Ring 8823-9 8823-9 8824-9 8826-9 8826-9
3 Deflector Baffle 26F-11 26F-11 27F-11 8826-5 8826-5
4A.1 40 Micron Filter Element 8823-7A 8823-7A 8824-7A 8826-7A 8826-7A
4A.2 20 Micron Filter Element 8823-7FA 8823-7FA 8824-7FA 8826-7FA 8826-7FA
6.3 4A.3 12 Micron Filter Element 8823-7XA 8823-7XA 8824-7XA 8826-7XA 8826-7XA
4B Coalescing Element 26C-14A 26C-14A 27C-14A 8926-7 8926-7
5 Retainer Baffle 26F-13 26F-13 27F-13 8926-25 8926-25
6 Plastic Bowl & Drain Cock 8823-41L 8823-41L 8824-41L 8828-41L 8828-41L
6.1 Drain Cock O-Ring 26F-17 26F-17 26F-17 26F-17 26F-17
6.2 Removable Drain Cock 26F-18 26F-18 26F-18 26F-18 26F-18
6.3 Plastic Bowl 8823-40L 8823-40L 8824-40L 8828-40L 8828-40L
7 Bowl Guard 8823-50 8823-50 8824-50 8826-50 8826-50
8 Bowl Clamping Ring 8823-30 8823-30 8824-30 8826-30 8826-30
7

Filter: Coalescing Filter:

(8826 / 8828) (8926 / 8928)
1
1
2
8 8 2
8
3 4B
4A.1, 4A.2,
Repair Kit 6 4A.3, 4B
Sight Glass Repair Kit RK88-SG. 6.3 5
6.3 5
6.2 7 6.2
7
We reserve the right to make engineering 6.1 6.1
changes in design or materials without notification.

East: 19 Kimberly Road • East Brunswick, NJ 08816 • Phone: 732-390-8480 / Fax: 732-390-9693
West: 1730 NE Miller Street • McMinnville, OR 97128 • Phone: 503-434-5964 / Fax: 503-472-1989