SCI FIRE SERVICE MASTER SDN BHD

(HQ) Plot 19 & 81, Lot Industri, Taman Batu Gajah Perdana, 31550 Pusing, Perak Darul Ridzuan
(KL) Suite 806, Level 8, Block A4, Leisure Commerce Square, Jalan 8/9,
46150 PetalingJaya, Selangor
(Penang) No.5, Jalan Bagan 25, Taman Bagan, 13400 Butterworth, Pulau Pinang
SCI/PRJ/F001 : Rev 00

PROJECT TITLE:
SINGLE ENGINEERING, PROCUREMENT, CONSTRUCTION (EPC) LUMP SUM FOR END-
OFLIFE PLASTIC RECYCLING PLANT, JOHOR, MALAYSIA (“PACE”)

MATERIAL SUBMISSION FOR APPROVAL

MATERIAL TYPE : FIRE HOSE CABINET

Reference No. : SCI-PE-MSF-FF-016

Revision : 01
Date Issued : 09/10/2024

Prepared by Reviewed by Approved by

Name: P.Karunakaran Name: Name:

Position: PROJECT Position: Position:

ENGINEER

SCI FIRE SERVICE MASTER SDN. BHD. Page 1 of 2

SCI-PE-MSF-FF-017
 MATERIAL TYPE : FIRE HOSE CABINET Revision: 01

AMENDMENT HISTORY

REVISION NO. ISSUE DATE DETAILS OF AMENDMENT

00 27/08/2024 First Submission

01 09/10/2024 Second Submission

MATERIAL SUBMISSION

REQUIRED INFORMATION DETAILS PROVIDED

Supplier’s Name: PROGRAD SDN BHD

7, Jalan Sungai Terap 32/182, Bukit Rimau Industrial Park,
Supplier’s Address:
Seksyen 32, 40460 Shah Alam, Selangor, Malaysia
Name of Product : Fire Hose Cabinet c/w Hose and Nozzle
Type of Product : Fire Fighting Equipment
Brand Prograd
Applicable Standard: FM Approved & UL listed
Sample Provided: No
Catalogue Yes, refer the attached copy (3 pages)

SCI FIRE SERVICE MASTER SDN. BHD. Page 2 of 2

 +<'5$176 $&&(6625,(6 
+<'5$176 $&&(6625,(6(48,30(17&$%,1(76
Progard offers standard and custom built storage cabinets to suit individual requirements. These cabinets are able to
contain various portable fire fighting equipment such as fire hoses, handline nozzles, foam branchpipes, portable monitors,
hydrant and nozzle wrenches, eductors and waterway apparatus.
Due to their robust construction, selective cabinets with marine painting system are offered for use in offshore
installations, petrochemical plants, marine docks, airports and manufacturing facilities. Subject to special paint application,
these cabinets are protected against corrosion and weathering.
Typically, the cabinets are manufactured in mild (or carbon) steel material. Option to specify stainless steel 304SS or
316SS material. Standard finish is red paint.

FIRE HOSE CABINETS

Model 06 HC10-1 (1.0 mm)
Model 06 HC10-2 (1.5 mm)
Model 06 HC10-3 (2.0 mm)
Mild steel construction with single solid hinged door. Floor
mounted. Option: wire reinforced glass door.
Suitable for storing the following fire equipment:
y two 1½” or 2½” x 100’ (30m) fire hoses and
y one 1½” or 2½” fog nozzle.
Option: completely stainless steel cabinets are available on request.

FIRE HOSE REEL CABINETS

Model 06 HC12-1 (1.0 mm)
Model 06 HC12-2 (1.5 mm)
Model 06 HC12-3 (2.5 mm)
Mild steel construction with twin solid hinged door. Wall mounted.

Suitable for storing the following:

y one complete ¾” hose reel complete with reel, hose and nozzle
or
y one complete 1” hose reel complete with reel, hose and nozzle
Option: completely stainless steel cabinets are available on request.

FIRE HOSE CABINETS

Model 06 GRC14
Reinforced glass fibre construction with solid hinged door. Wall
mounted. Red colour.
Overall Dimensions: 610mm L x 545mm W x 170mm H.
Suitable for storing the following:
y one standard 2½” layflat fire hose and one fog nozzle.

FIRE HOSE CABINETS

Model 06 FHX200 1.5 mm
Model 06 FHX200 2.5 mm
Mild steel construction with twin solid hinged door. Floor mounted.
Suitable for storing the following fire equipment:
y four 1½” or 2½” x 100’ (30m) fire hoses, two 1½” or 2½” fog
nozzle and one foam branchpipe.
Option: completely stainless steel cabinets are available on request.

HA-01
 Temperature Range: -20°C to +80°C

FIRE FIGHTING HOSES Maintenance Free – does not require

drying, unaffected by mildew and is
06 FLAMELITE XP rot-proof and waterproof

Hose Construction
The Flamelite XP fire hoses are constructed
of a synthetic polyester jacket with woven
textile reinforcement and a PVC/Nitrile cover.
These hoses are specifically manufactured in
conformance to UL-19 specification.
Woven Textile Jacket – All Polyester
Cover/Lining – unified PVC/Nitrile
Outside Cover – PVC rubber
Colour - Red (standard)
Options: Yellow, Blue, Orange, Green and
Black (minimum quantity applies)

Technical Specification:
Diameter 1¾ “ 2”
Working PSI 250 250
The Flamerite XP fire hoses are ideal for Pressure (bar) (17) (17)
use in environments which requires a Kink Test PSI 500 500
more durable oil/chemical resistant hose Pressure (bar) (34) (34)
over the conventional polyester fibre Proof PSI 500 500
hoses. Pressure (bar) (34) (34)
Burst
Suitable for use in petroleum refineries, PSI 750 750
Pressure
petrochemical complexes, oil & gas (bar) (51) (51)
(max)
exploration & storage facilities, power Coil
generation & distribution, fertilizer plants, inch 21.7 21.7
Diameter
atomic energy facilities, marine ports and (mm) (55) (55)
(per 30m)
docks, airports, defence establishments, Weight (per Lb 11 12.8
municipal fire brigades and multi-storey 30m) (kg) (5) (5.8)
commercial complexes. Note: Only 1½” and 2½” hose sizes are UL listed
These hoses are available in a variety of
lengths and diameters with suitable Hose Couplings
couplings to meet every customised Standard aluminium alloy instantaneous
requirement. BS336 hose couplings
Option: gunmetal LG2 instantaneous BS336
Features couplings
Oil & Chemical Resistant - Other options: light alloy or brass German
construction and blend of PVC/Nitrile Storz, brass American NST.
rubber gives good resistance against
contact with a wide range of chemical
Ordering Information
products The following details should be provided
when ordering:
Weather Resistant – has excellent 1) Product Code
resistance against ozone and 2) Hose Diameter and Length
atmospheric weathering and gives good 3) Size/material of couplings
performance
CONSTANT FLOW NOZZLE
04 HNCG-330A Anodised Alloy
04 HNCG-330B Brass

Features
y Single Flow / Constant
y Combination Fog and Straight Stream
y Flow change without changing pattern
y Strong Lightweight Aluminum Alloy (hard
anodised finish) or Brass construction
04 HCG-330A
y Pattern Detents for Positive Pattern
Positioning
y Built-in Shutoff Ball Valve
y Flush down without Shutting down
y Excellent for use with Progard Eductors
and Foam Tubes
y Standard 1½" threads
04 HCG-330B

Technical Specification:

Model Flow Inlet Size Length Weight

Material
GPM litre/min inch inch (mm) kg (lbs)
1½ female
04 HNCG-330A Aluminium alloy 8 (203) 1.68 (3.7)
60, 95 or 230, 360 or NST
125 475 1½ female
04 HNCG-330B Brass 8 (203) 4.54 (10)
NST

Performance Data
Flow Acual Flow Effective Range
Setting
75 psi 100 psi 125 psi 75 psi 100 psi 125 psi
Model
5 bar 7 bar 8.5 bar 5 bar 7 bar 8.5 bar
GPM GPM LPM GPM LPM GPM LPM m ft m ft m ft

60 52 197 60 227 67 254 26 85 29 95 32 105

04 HNCG-330A
95 82 310 95 360 106 401 27 90 35 115 38 125
04 HNCG-330B
125 108 409 125 475 140 530 35 115 38 125 44 145

Note: Model 04 HNCG-330B is Factory Mutual (FM) Approved