Scribd
Upload
75 views

Fanuc PMC Backup Procedure

This document outlines the procedure for backing up and loading the FANUC PMC Ladder from a CNC machine to a memory card and vice versa. It includes detailed steps for setting the I/O channel, selecting the appropriate options for backup or loading, and saving the sequence program to Flash ROM. Proper execution of these steps ensures that the PMC ladder is successfully transferred and stored.

Uploaded by

Sudheer Rawat
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
75 views

Fanuc PMC Backup Procedure

This document outlines the procedure for backing up and loading the FANUC PMC Ladder from a CNC machine to a memory card and vice versa. It includes detailed steps for setting the I/O channel, selecting the appropriate options for backup or loading, and saving the sequence program to Flash ROM. Proper execution of these steps ensures that the PMC ladder is successfully transferred and stored.

Uploaded by

Sudheer Rawat
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 11

FANUC PMC LADDER BACKUP PROCEDURE

Procedure to take FANUC PMC Ladder backup


from CNC (machine) to Memory card
1. Switch ON machine and press emergency button, keep machine in emergency
mode.
2. Go to OFFSET page and make I/O CHANNEL = 4 for memory card and 17
for pen drive (USB).
3. Press SYSTEM key on MDI panel.

4. Select PMCMNT soft key.

5. Press right most continues key.


6. Select I/O soft key.

7. To take PMC ladder backup from CNC to memory card do following


selections:

Query Setting
PMC (Output target PMC)
DEVICE MEMORY CARD
FUNCTION WRITE
KIND OF DATA SEQUENCE PROGRAM
8. Move the query selection cursor to FILE NAME and press NAME soft key to
set a new file name.

9. Press EXEC soft key to output sequence program

10. If the specified file name already exists on a memory card, the following
message will be displayed.

 "THIS FILE NAME IS ALREADY USED. OVERWRITE IT?"


 If you want to overwrite the file, press the [YES] soft key. And,
 If you want to cancel the output, press the [NO] key.
Now PMC ladder backup is transferring from CNC to memory card, process
as shown:
Procedure to load FANUC PMC Ladder backup from Memory card to CNC
(machine)
1. Switch ON machine and press emergency button, keep machine in emergency
mode.
2. Go to OFFSET page and make I/O CHANNEL = 4 for memory card and 17
for pen drive (USB).

3. Press SYSTEM key on MDI panel.


4. Select PMCMNT soft key.

5. Press right most continues key.


6. Select I/O soft key.

7. To take PMC ladder backup from CNC to memory card do following


selections:

Query Setting
PMC (Output target PMC)
DEVICE MEMORY CARD
FUNCTION READ
KIND OF DATA SEQUENCE PROGRAM
8. Press (OPRT) soft key to display list ladder backup files available on memory
card as shown below. Move don/up cursor to select required PMC backup file
from list.

9. Click on SELECT soft key and press EXEC soft key.

10. Now at this point PMC ladder back up is loaded to CNC (machine).
Saving Sequence Program to Flash ROM

After you load sequence program to CNC (machine), you have to save
sequence program to Flash ROM of CNC. If you didn’t do this, your
sequence program will not load to CNC (machine).
1. Do following selection.

Query Setting
PMC (Output target PMC)
DEVICE FLASH ROM
FUNCTION WRITE
KIND OF DATA SEQUENCE PROGRAM

2. Press the [EXEC] soft key to save sequence programs.

You might also like