SCC1300TB

Telescopic Boom Crawler Crane

130 Tons Lifting Capacity
Quality Changes the World

Max. lifting moment: 480t·m

Max. boom length: 60m
Max. boom+jib length: 60m+18.1m
The parameters, pictures and standard/optional equipment are only for reference in this
brochure, the actual machine is based on the effective price list and contract.

www.sanyglobal.com V1.1
Telescopic Boom Crawler Crane ▪ Upperworks

SCC1300TB P03
Main
Characteristics
▪ Lowerworks
▪ Operation Equipment
▪ Safety Device

▪ Major Performance & Specifications

Technical ▪ Outline Dimension

P08 Parameters ▪ Transport Dimension
▪ Transport Plan

▪ Working range of H
P13 Configurations ▪ Load Chart of H
▪ Load Chart of FJ
A
SCC1300TB
TELESCOPIC BOOM CRAWLER CRANE
技术参数
130 TONS LIFTING CAPACITY
QUALITY CHANGES THE WORLD

Main Characteristics
▪▪ Page 04 Upperworks
▪▪ Page 06 Lowerworks
▪▪ Page 06 Operation equipment
▪▪ Page 07 Safety Devices

> 03
04 SCC1300TB Telescopic Boom Crawler Crane
130 Tons Lifting Capacity
_________________
Main Characteristics

Product Specification

Engine Main and aux. load hoist mechanism

▪▪ Model: 6HK1XKJC-01 diesel engine. ▪▪ Pump and motor: Dual-placement speed controlled energy-
▪▪ Type: Four-stroke, water cooling, vertical 6-cylinder, direct efficient, combination of winch balance valve and anti-hook
injection, turbo supercharging, inter-cooling, meet non-road sliding technology, lifting or lowering the load steadily.
emission regulation of europe (tier III ), and comply with non- ▪▪ Winch brake adopts concealed, normally closed, wet type and
road emission regulation of China (Tier III). spring loaded fin type normally engaged brake, spring force
▪▪ Displacement: 7.79L. braking, oil pressure released.
▪▪ Rated power: 212kW/2000rpm. ▪▪ Branded anti-self-rotating high-strength steel rope.
▪▪ Maximum torque: 1080N·m/1500rpm. ▪▪ Main and aux. load hoist winches adopt piston motor of fixed
▪▪ Starting device: 24V-5.0kW. displacement to drive planetary reducer.
▪▪ Radiator: Aluminium sheet fin type radiator core.
▪▪ Air filter: Dry type air filter system, fitted with main filter element, Rope speed (outermost layer) 0~130m/min
safety filter element and resistance indicator. Main Diameter of wire rope Φ22mm
lifting
▪▪ Hand throttle: Rotary type hand throttle, electrically controlled. mechanism Overall length of wire rope 280m
▪▪ Fuel filter: Replaceable paper filter element. Rated tensile force of single rope 10.5t
▪▪ Batter: Two 12Vx165Ah capacity batteries, connected in series.
▪▪ Fuel tank: 400L. Rope speed (outermost layer) 0~130m/min
Auxiliary Diameter of wire rope Φ22mm
lifting
Electrical control system mechanism Overall length of wire rope 190m
▪▪ Adopt SYIC-II integrated control system independently Rated tensile force of single rope 10.5t
researched and developed by Sany. This system is featured by
high integration level, accurate operation and reliable quality.
▪▪ Control system: Composed of power system, engine system, Boom hoist mechanism
main control system, Load Moment Limiter, auxiliary system and ▪▪ Double acting single piston rod hydraulic cylinder, fitted with
safety monitoring system. Data communication among controller, safety balance valve, luffing angle: 0°~80°, adopting dead-
display and engine is conducted by CAN bus technology. weight luffing system to reduce the energy consumption and
▪▪ Display: It can display the engine rotating speed, fuel volume, improve the steadiness of luffing operation.
engine oil pressure, servo pressure, wind speed, engine working
time, load weight, boom angle and other working parameters Slewing mechanism
and working conditions. ▪▪ Slewing brake adopts concealed, normally closed, wet type and
spring loaded fin type normally engaged brake, spring force
Hydraulic system braking oil pressure released.
▪▪ Main pump: Adopt open piston pump with large variable ▪▪ With integrated cushion valve, the slewing system has free slip
displacement. function to realize steady slewing start and control, showing
▪▪ Gear pump: Dual gear pump for slewing, heat radiating and outstanding microinching performance.
servo. ▪▪ Unique slewing cushion design ensures more stable braking.
▪▪ Control: The main piston pump of variable displacement, winch ▪▪ Slewing drive: External gearing slewing drive, capable of
piston motor of limitless variable displacement, control system conducting 360° rotation, maximum rotation speed 1.7r/min.
of hydraulic positive flow. The maximum driving pressure can reach 20MPa, providing
▪▪ Way of cooling: Heat exchanger, fan core and multi-stage torque of 15.91 t·m.
cooling. ▪▪ Branded motor reducer, more reliable.
▪▪ Filter: Large flow, high accuracy filter, with bypass valve and ▪▪ Slewing lockout: Locking device, to ensure that the superstructure
indicator, which can remind the user to replace the filter element can be locked in front and rear directions conveniently and reliably
in time. during off-work time and transportation.
▪▪ Max. pressure of system: ▪▪ Slewing bearing: Single row ball type bearing.
Main load, aux. load, and travel system: 32MPa.
Boom hoist cylinder lifting: 32MPa.
Slewing system: 24MPa.
Control system: 4.5MPa.
▪▪ Hydraulic oil tank capacity: 950L.

Quality Changes the World

 SCC1300TB Telescopic Boom Crawler Crane
130 Tons Lifting Capacity
05
_________________
Main Characteristics

Product Specification

Counterweight Traveling drive

▪▪ The easily self-assembled and self-disassembled counterweights ▪▪ Independent traveling drive device is adopted for each side of
facilitate transport. crawler frame, so as to realize straight travel, turning through
▪▪ The counterweights and trays pile up, conducting easy assembly, reducer and drive wheel by travel motor.
disassembly, and transport. ▪▪ Traveling speed: The traveling can be switched between high
▪▪ Rear counterweight: Total weight: 36t, performing self-assemble speed and low speed, and the high speed can be up to 1.65km/h.
and self-disassemble function. ▪▪ Gradeability: 40%.
▪▪ Carbody counterweight: Fitted at front and rear of carbody, 6t*2.
Traveling braking
Superstructure ▪▪ Concealed wet type and spring loaded fin type normally
▪▪ High strength steel welding frame structure, no torsional engaged brake, spring force braking, oil pressure released.
deformation, reasonable component layout, and convenient
maintenance service. Telescopic crawler
▪▪ Pressure of 25MPa by aux. system pushes the cylinder to realize
Cab and control the extension and retracting of the crawlers. The crawlers are
▪▪ Novelty in cab design, artistic modeling and trim and large area extended at work and retracted for transport with the whole
glass window; fitted with low beam headlamp and rearview basic machine.
mirror to broaden horizon; installed with air conditioner and
radio; the arrangement of seats, control handle and various Crawler tensioning
control buttons is ergonomically designed to enable more ▪▪ The jack pushes the guiding wheel and insert shims to adjust the
conformable operation. crawler tension.
▪▪ Cab layout: Integrated touch screen of 10.4 inch, programmable
smart buttons vibration handles are offered as optional and man- Steering system
machine interaction interface are more perfect. ▪▪ It can realize single track turning and pivot turning.
▪▪ Armrest box: Operation handle, electrical switch, emergency
stop switch and ignition switch are installed on the left and right Track shoe
armrest boxes. The armrest box can be adjusted with the seat. ▪▪ High-strength alloy milled steel prolongs the service life of track
▪▪ Seat: Suspension type multi-mode multi-level regulated seat, shoes. Width 950mm, Qty 58×2.
fitted with unloading switch.
▪▪ Air conditioner: Cooling and heating air, optimized air passage Track roller
and air port.
▪▪ Maintenance-free track roller.
▪▪ Multiple cameras can be presented on the monitor at the same
time to realize real-time monitoring of wire rope on each winch,
Outrigger
conditions behind the counterweight and surrounding the
▪▪ Outrigger cylinder is offered to facilitate the track frame
machine.
disassembly during jobsite transfer.

Quality Changes the World

06 SCC1300TB Telescopic Boom Crawler Crane
130 Tons Lifting Capacity
_________________
Main Characteristics

Product Specification Safety Device

Main boom Smart integrated load moment indicator

▪▪ The boom is made of high-strength steel structure with U-shape ▪▪ The integrated LMI system is provided as standard offering
section area, with five sections, of which the basic boom is to realize calibration-free and high safety and efficiency for
13.3m and the max. boom length is 60m. equipment control to realize calibration-free and high safety and
▪▪ Full power with single cylinder and plug for telescoping. efficiency for equipment control.
▪▪ Based on lifting mechanics modes, the LMI computing system
Fixed jib enables the loading precision, by no-loading calibration, to
▪▪ Two fixed jib length of 10.7m and 18.1m. 0-10% and protects loading operation all-around; The system
▪▪ Installation angle includes 0°, 15° and 30°. alarms once over-loaded to ensure safety.
▪▪ The LMI system can automatically detect the suspended load
Boom tip pulley weight, working radius of the crane and the angle of boom,
▪▪ Welding structure, connected with the boom through pin, and and compare rated load weight and actual load, working radius
used for auxiliary hook operation. and boom angle. Under normal operation condition, it can
intelligently judge and automatically cut off the crane action in
Lifting hook dangerous direction, and have black box function to record the
overload information.
Name Capacity (t) Pulley block Weight (t) Quantity ▪▪ Its main components include: Monitor, controller, length and
1 130 7 1.5 1 angle sensor, pressure sensor, etc.
2 100 5 1.24 1
3 80 3 1.0 1
Assembly/working mode switching switch
▪▪ In assembly mode, certain safety devices are disabled to
4 12.5 1 0.3 1
facilitate crane assembly.
Note: the above-mentioned operating equipment is full-up configuration. The actual ▪▪ In work mode, all safety limiting devices activate to protect the
configurations are subject to contract. operation.

Emergency stop
▪▪ In emergency situation, this button is pressed down to cut off
the power supply of the whole machine and all actions stop.

Over-hoist protection of the main/auxiliary load hoist

▪▪ Height limiter is equipped on the boom/jib tip, which prevents
the hook lifting up too much. When the hook is lifted up to the
limit height, the limit switch activates, alarm pops up on the
monitor, buzzer on the right front control panel sends alarm,
failure indicator light starts to flash and the hook hoisting action
is cut off automatically.

Over-release protection of the main/auxiliary load hoist

▪▪ Three-wrap protector is installed on main and aux. load hoist
to prevent over-release of wire rope. When the rope is paid
out close to the last three wraps, the limit switch acts, and the
system sends alarm through buzzer and show the alarm on the
monitor, automatically cutting off the winch action.

Quality Changes the World

 SCC1300TB Telescopic Boom Crawler Crane
130 Tons Lifting Capacity
07
_________________
Main Characteristics

Safety Device

Function lock
▪▪ If the function lock level is not in work position, all the other Seat interlock
handles won't work, which prevents any mis-operation caused by ▪▪ If the operator leaves the seat, all control handles and switches
accidental hitting. will be disabled immediately to prevent any mis-operation due
to accidental collision.
Slewing lock
▪▪ Mechanical lock by pulling the pin, will lock the upperworks at Illuminating light
the front part and the rear. ▪▪ The machine is equipped with short-beam light in front of
machine, lamps in operator's cab and lighting devices for night
Hook latch operation, as well as boom lights, so as to increase the visibility
▪▪ The lifting hook is installed with a baffle plate to prevent wire during work.
rope from falling off.
Rearview mirror
GPS monitoring system ▪▪ It is installed at the front of the operator's cab, at the right
▪▪ Standard remote monitoring system: It can provide functions like handrail of the platform and near the winches.
GPS locating, GPRS data transfer, machine status inquiry and
statistics, operating data monitoring and analysis, and remote Level indicator
diagnosis of failures. ▪▪ Electrical level indicator can show the inclination angle of
superstructure on the monitor.
Tri-color load indicator
▪▪ The load indicator light has three colors, i.e., green, yellow and Closed circuit monitoring system
red; and the real time load status is presented on the display. ▪▪ There are two cameras and illuminating lights on the tail of
When the actual load is smaller than 90% of rated load, the rotating bed, which can show the rear part and winches working
green light is on; when the actual load is larger than 90% and on the machine.
smaller than 100%, the yellow light is on, the alarm light flashes
and sends out intermittent sirens; when the actual load reaches
100% of rated load, the red light is on, the alarm light flashes
and sends out continuous sirens. When the actual load reaches
102%, the system will automatically cut off the crane's dangerous
operation.

Flash alarm
▪▪ When the LMI is powered on, the flash alarm will turn on.

Slewing indicator light

▪▪ The slewing indicator light flashes during traveling or slewing.

Quality Changes the World

B
SCC1300TB
TELESCOPIC BOOM CRAWLER CRANE
130 TONS LIFTING CAPACITY
QUALITY CHANGES THE WORLD

Technical Parameters
▪▪ Page 09 Major Performance & Specifications
▪▪ Page 10 Outline Dimension
▪▪ Page 11 Transport Dimension
▪▪ Page 14 Transport Plan

> 08
 SCC1300TB Telescopic Boom Crawler Crane
130 Tons Lifting Capacity
09
_________________
Technical Parameters

Major Performance & Specifications

Major Performance & Specifications of SCC1300TB

Specification Unit Parameter
Full length of the whole crane mm 16855
Width of the whole machine (retracted) mm 5850 (3970)
Outline
Height of the whole machine mm 3800
dimension
Center distance of driving and engaged wheels mm 6163
Width of track shoe mm 950
Maximum rated lifting weight t 130

H (main boom) Main boom length m 13.3~60

configuration Main boom angle ° 0~80
Maximum rated lifting moment t·m 480

FJ (fixed jib) Longest main boom + longest jib m 60+18.1

configuration Included angle between main boom and jib ° 0, 15, 30
Main/aux. load hoist rope speed m/min 0~130
Time to fully boom up/down s 80/110
Working speed Time to fully extend/retract boom s 480/480
Slewing speed rpm 0~1.7
No-load traveling speed km/h 0~1.65
Model / 6HK1XKJC-01
Engine
Rated power/speed kW/rpm 212/2000
Wire rope Diameter mm Φ22
Weight of the whole machine t 123
Transportation
Maximum weight of single piece transportation t 48 (remove main and aux. hook)
parameters
Transportation dimension (long x width x height) mm 16800×3000×3320

Other Average ground bearing pressure MPa 1.045

Parameters Min. slewing radius mm 5320

Quality Changes the World

10 SCC1300TB Telescopic Boom Crawler Crane
130 Tons Lifting Capacity
_________________
Technical Parameters

Unit:mm

Outline Dimension

4000
16855 3000
3800

1304
1322
6163 950

360

510
7120
5850/3970(Extended/ Retracted)

R5320

Quality Changes the World

 SCC1300TB Telescopic Boom Crawler Crane
130 Tons Lifting Capacity
11
_________________
Technical Parameters

Transport Dimension
Note:
① . The component transportation dimension is schematic diagram, and is not drawn to scale. The marked dimension is design value, excluding the package.
② . The weight is design value, which may be slightly different because of manufacturing tolerance. Total rear counterweight: 36t, total carbody counterweight:12t.
③ . After product upgrading of the Company, the outline dimension and weight of the components above may vary, and the new product shall prevail.

16855
Whole machine ×1
R5300
Length (L) 16.86m
Width (W) 3.97m
3798
Height (H) 3.80m
6163
Weight 123.0t
1322

7106

16806 Basic machine (with jib) ×1

R5300
Length (L) 16.80m
Width (W) 3.00m
3317

Height (H) 3.30m

5152
Weight 48.0t

7106
Left crawler ×1
Length (L) 7.11m
1311

Width (W) 1.24m

Height (H) 1.31m
1240

Weight 11.6t

7106
Right crawler ×1
1311

Length (L) 7.11m

Width (W) 1.24m
1240

Height (H) 1.31m

Weight 11.6t

Counterweight tray ×1
1662

4000
Length (L) 4.00m
Width (W) 1.69m
1690

Height (H) 1.66m

Weight 20.0t

Rear counterweight ×1
835

Length (L) 1.58m

1583 Width (W) 1.09m
Height (H) 0.84m
1090

Weight 4.0t

Quality Changes the World

12 SCC1300TB Telescopic Boom Crawler Crane
130 Tons Lifting Capacity
_________________
Technical Parameters

Transport Dimension

Rear counterweight ×1
835

1583
Length (L) 1.58m
Width (W) 1.09m
1090

Height (H) 0.84m

Weight 4.0t

Rear counterweight ×1
835

1583 Length (L) 1.58m

Width (W) 1.09m
1090

Height (H) 0.84m

Weight 4.0t

Rear counterweight ×1
835

1583 Length (L) 1.58m

Width (W) 1.09m
1090

Height (H) 0.84m

Weight 4.0t

Carbody counterweight ×2
904

2022 Length (L) 2.02m

Width (W) 1.26m
1255

Height (H) 0.90m

Weight 6.0t

1743 Main boom ×1

Length (L) 13.96m
2249

2249

Width (W) 1.74m

13957
Height (H) 2.25m
Weight 15.9t
1743

Fixed jib ×1
1215
Length (L) 11.24m
1690
1690

Width (W) 1.22m

11239 Height (H) 1.69m
Weight 1.8t
1215

Quality Changes the World

 SCC1300TB Telescopic Boom Crawler Crane
130 Tons Lifting Capacity
13
_________________
Technical Parameters

Transport Dimension

900 620
130t lifting hook ×1
Length (L) 1.82m
Width (W) 0.62m
1815

Height (H) 0.90m

Weight 1.5t

100t hook ×1
672 850
Length (L) 2.05m
Width (W) 0.85m
Height (H) 0.67m
2050

Weight 1.24t

80t lifting hook ×1

665 690
Length (L) 1.86m
Width (W) 0.69m
Height (H) 0.66m
1856

Weight 1.0t

12.5t lifting hook ×1

ø345 Length (L) 0.81m
Width (W) 0.35m
Height (H) 0.35m
814

Weight 0.27t

Quality Changes the World

14 SCC1300TB Telescopic Boom Crawler Crane
130 Tons Lifting Capacity
_________________
Technical Parameters

Transport Plan

■ Land transport:
48t: basic machine.

31t: Two crawlers+Rear counterweight 4+Rear counterweight 5.

28t: Rear counterweight 1(Rear counterweight tray)+Rear counterweight 2+Rear counterweight 3.

16t: Carbody counterweight+hook.

Quality Changes the World

 SCC1300TB Telescopic Boom Crawler Crane
130 Tons Lifting Capacity
15
_________________
Technical Parameters

Transport Plan

■ Marine
transport
Whole machine: 75t

Y X

Quality Changes the World

C
SCC1300TB
TELESCOPIC BOOM CRAWLER CRANE
130 TONS LIFTING CAPACITY
QUALITY CHANGES THE WORLD

Configurations
▪▪ Page 17 Working range of H
▪▪ Page 18 Load Chart of H
▪▪ Page 19 Load Chart of FJ

> 16
 SCC1300TB Telescopic Boom Crawler Crane
130 Tons Lifting Capacity
17
_________________
Configurations

Working range of H

80 60.0m+18.1m
Lifting height (m)

0°
15°

75 30°
60.0m+10.7m

70

50°
65
60.0m
°

60 56.3m
30

°
15

55
52.0m

45°
°
30

47.7m
°
15

50

43.4m
45

39.1m

40
34.8m

35
30.5m
26°

30 26.2m

25 21.9m

16° 17.6m
20

13.3m
15

10

60 55 50 45 40 35 30 25 20 15 10 5

Radius (m)

Quality Changes the World

18 SCC1300TB Telescopic Boom Crawler Crane
130 Tons Lifting Capacity
_________________
Configurations

Unit: t

Load Chart of H

H Configuration
Rear counterweight: 36t, Carbody counterweight: 12t, track gauge: 4.9m (gradient: 0° )
Radius(m) 13.3 17.6 21.9 26.2 30.5 34.8 39.1 43.4 47.7 52.0 56.3 60.0 Radius(m)
3 130 110 3
3.5 125 107 92.7 3.5
4 116 105 87.2 73.8 4
4.5 107 98 82.3 70.1 4.5
5 96 94 78.1 66.5 57.3 5
5.5 87 85 73.8 62.8 54.6 5.5
6 79 76 70.1 60.1 51.8 45.4 6
7 68 66 64 54.9 47.9 41.8 36 7
8 59 58 56.8 50.6 44.2 38.7 33.7 28.9 8
9 51.1 50 48.6 46.9 40.8 36.3 31.7 27.4 23.1 9
10 42.8 43.4 42.2 41.1 38.1 34.1 29.2 26 22 17.4 10
11 37.1 36.7 36.2 34.8 32 27.7 24.7 20.2 16.8 13.8 12.3 11
12 32.1 31.8 32.2 31 29.9 26.3 23.6 19.4 16.2 13.3 11.9 12
14 24.7 24.4 25.2 25.1 24.5 23.9 20.7 17.8 15.1 12.4 9.6 14
16 19.3 20 20.2 20.3 20.1 19 16.4 14.1 11.6 9.1 16
18 15.4 16.2 16.3 16.6 16.9 16.7 15.3 13.1 9.6 8.6 18
20 13.2 13.4 13.7 14.1 14.2 14 12.3 9.1 8.2 20
22 10.8 11 11.3 11.8 12 12 11.5 8.6 7.7 22
24 9.1 9.4 9.8 10.1 10.3 10.3 8.2 7.4 24
26 7.5 7.8 8.2 8.5 8.7 9 7.8 7 26
28 6.4 6.9 7.1 7.3 7.6 7.4 6.7 28
30 5.3 5.7 6 6.2 6.5 6.9 6.4 30
34 3.9 4.1 4.3 4.6 5 5.1 34
38 2.7 2.9 3.2 3.6 3.6 38
42 1.7 2 2.4 2.4 42
46 1.5 46
Min. limit Min. limit
angle 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 16° 26° angle
section 2 0 0 46 46 46 92 92 92 92 92 92 100 section 2
section 3 0 46 46 46 92 46 46 92 92 92 92 100 section 3
section 4 0 0 0 46 46 46 46 46 92 92 92 100 section 4
section 5 0 0 0 0 0 46 46 46 46 92 92 100 section 5
section 6 0 0 0 0 0 0 46 46 46 46 92 100 section 6
Parts of line 12 12 10 8 5 5 4 3 3 2 2 2 Parts of line

Quality Changes the World

 SCC1300TB Telescopic Boom Crawler Crane
130 Tons Lifting Capacity
19
_________________
Configurations

Unit: t

Load chart of FJ

FJ Configuration
Boom:60m, Carbody counterweight: 12t, Rear counterweight: 36t,track gauge: 4.9m (gradient: 0° )
Boom angle Jib:10.7m Jib:18m Boom angle
0° 15° 30° 0° 15° 30°
78° 7 5.2 3.7 3.8 2.8 2.2 78°
75° 6.8 4.5 3.6 3.4 2.6 2.1 75°
72° 6.3 4.2 3.4 3.2 2.5 2 72°
70° 5.4 4 3.3 3 2.4 1.9 70°
65° 4.5 3.6 3.1 2.7 2.2 1.7 65°
60° 4 3.3 2.9 2.4 1.9 1.5 60°
55° 3.4 2.4 2.3 1.9 1.6 1.4 55°
50° 2.4 2.2 2.1 0.7 0.7 0.6 50°
45° 1.1 1 0.9 45°
Min. limit angle 45° 50° Min. limit angle

※ Note-Rate load of crane:

① .The crawler must be extended when lifting.
② .The rated capacity in the load charts are calculated when the crane is parking on firm ground(gradient is within 1°）, and lifting the load slowly and steadily.
③ .The rated capacity values in the load charts are obtained when the wind speed is lower than 9.8 m/s under 75% of tipping load.
④ .All values in the load charts are valid for 360° slewing.
⑤ .The rated load shall be no more than 10.5t when using upper boom point sheave. If the jib unfolds, the rated lifting capacity of boom is 1.5t less.
⑥ .The rated capacity in the load charts include the weight of lifting hook,(main hook 1.5t, jib hook 0.3t) etc.; therefore, the actual rated capacity is the value
after deducting the weight of lifting tools (such as hook, riggings and wire rope), from the rated load in the load charts.
⑦ .The rated values above is just for full-up counterweight and flat ground. There are also load chart when rear counterweight is 0t, 20t, and 36t, and carbody
counterweight 0t or 12t, respectively with the gradient 1.5° , 2.5° , and 4° .

Quality Changes the World

Zhejiang Sany Equipment Co.,LTD
SANY Crawler Crane Industrial Park, No. 2188 Daishan Road, Wuxing District, Huzhou City,
Zhejiang Province, P. R. China Zip 313028
Consulting [email protected] (Crane BU) / [email protected] (IHQ)
After-sales Service 0086-400 6098 318

Reminder:
Any change in the technical parameters and configuration due to product modification or upgrade may occur without prior notice.
The machine in the picture may include additional equipment. This brochure is for reference only, and goods in kind shall prevail.
Copyright at SANY. No part of this brochure may be copied or used for any purpose without written approval from SANY.

© Edited in April 2023

SANY CRANE
www.sanyglobal.com