Data sheet 6ES7288-0CD10-0AA0
SIMATIC PM207/1AC/24VDC/3A
SIMATIC S7-200 smart Regulated power supply input: 100-240 V AC output: 24
V/3 A DC
input
type of the power supply network 1-phase AC
supply voltage at AC
● minimum rated value 100 V
● maximum rated value 240 V
● initial value 85 V
● full-scale value 264 V
input voltage at DC 88 ... 370 V
wide range input Yes
buffering time for rated value of the output current in the event of 20 ms
power failure minimum
operating condition of the mains buffering at Vin = 170 V
line frequency 50/60 Hz
line frequency 47 ... 63 Hz
input current
● at rated input voltage 120 V 1.65 A
● at rated input voltage 230 V 0.75 A
current limitation of inrush current at 25 °C maximum 30 A
I2t value maximum 1.5 A²·s
fuse protection type internal
fuse protection type in the feeder Recommended miniature circuit breaker: 10 A characteristic C
output
voltage curve at output Controlled, isolated DC voltage
output voltage at DC rated value 24 V
output voltage adjustable Yes; via potentiometer
adjustable output voltage 22.8 ... 26.4 V
relative control precision of the output voltage
● on slow fluctuation of input voltage 0.1 %
● on slow fluctuation of ohm loading 0.5 %
voltage peak
● maximum 50 mV
● typical 25 mV
display version for normal operation Green LED for 24 V OK
behavior of the output voltage when switching on Overshoot of Vout < 1 %
response delay maximum 0.5 s
voltage increase time of the output voltage
● typical 50 ms
output current
● rated value 3A
● rated range 0 ... 3 A; +55 ... +70 °C: Derating 3.5%/K
supplied active power typical 72 W
bridging of equipment Yes
number of parallel-switched equipment resources for increasing 2
the power
efficiency
efficiency in percent 89 %
power loss [W]
● at rated output voltage for rated value of the output 9W
current typical
closed-loop control
6ES72880CD100AA0 Subject to change without notice
7/23/2024
Page 1/3 © Copyright Siemens
relative control precision of the output voltage with rapid 0.2 %
fluctuation of the input voltage by +/- 15% typical
relative control precision of the output voltage at load step of 3%
resistive load 10/90/10 % typical
setting time
● load step 10 to 90% typical 1 ms
● load step 90 to 10% typical 1 ms
protection and monitoring
design of the overvoltage protection < 28.8 V
property of the output short-circuit proof Yes
design of short-circuit protection Constant current characteristic
response value current limitation 3.6 ... 4.4 A
● typical 4A
enduring short circuit current RMS value
● typical 4A
safety
galvanic isolation between input and output Yes
galvanic isolation Safety extra low output voltage Vout according to EN 60950-1
operating resource protection class Class I
leakage current
● maximum 3.5 mA
protection class IP IP20
standard
● for emitted interference EN 55022 Class B
● for mains harmonics limitation EN 61000-3-2
● for interference immunity EN 61000-6-2
standards, specifications, approvals
certificate of suitability
● CE marking Yes
● UL approval Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259
● CSA approval Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259
● UKCA marking No
● EAC approval No
● Regulatory Compliance Mark (RCM) No
● CCC approval Yes
● NEC Class 2 No
type of certification
● BIS Yes; R-41184349
● CB-certificate Yes
MTBF at 40 °C 500 000 h
MTBF at 25 °C according to MIL-HDBK-217F, 100% full load (24 V, 3 A), input voltage: 220 V
AC
standards, specifications, approvals hazardous environments
certificate of suitability
● IECEx No
● ATEX No
● ULhazloc approval No
● cCSAus, Class 1, Division 2 No
● FM registration No
standards, specifications, approvals marine classification
shipbuilding approval No
Marine classification association
● American Bureau of Shipping Europe Ltd. (ABS) No
● French marine classification society (BV) No
● Det Norske Veritas (DNV) No
● Lloyds Register of Shipping (LRS) No
ambient conditions
ambient temperature
● during operation -25 ... +70 °C; With natural convection
● during transport -40 ... +85 °C
● during storage -40 ... +85 °C
6ES72880CD100AA0 Subject to change without notice
7/23/2024
Page 2/3 © Copyright Siemens
environmental category according to IEC 60721 Climate class 3K3, 5 ... 95% no condensation
connection method
type of electrical connection screw terminal
● at input L, N, PE: screw terminal for 0.5 ... 6 mm² single-core / 0.5 ... 4 mm² finely
stranded
● at output +1, +2, -1, -2: screw terminal for 0.5 ... 4 mm²
mechanical data
width × height × depth of the enclosure 45 × 10 × 81 mm
installation width × mounting height 85 mm × 140 mm
required spacing
● top 20 mm
● bottom 20 mm
● left 20 mm
● right 20 mm
fastening method Snaps onto DIN rail EN 60715 35x7.5/15
● standard rail mounting Yes
● S7 rail mounting No
● wall mounting Yes
housing can be lined up No
net weight 0.46 kg
additional information
other information Specifications at rated input voltage and ambient temperature +25 °C (unless
otherwise specified)
Classifications
Version Classification
eClass 14 27-04-07-01
eClass 12 27-04-07-01
eClass 9.1 27-04-07-01
eClass 9 27-04-07-01
eClass 8 27-04-90-02
eClass 7.1 27-04-90-02
eClass 6 27-04-90-02
ETIM 9 EC002540
ETIM 8 EC002540
ETIM 7 EC002540
IDEA 4 4130
UNSPSC 15 39-12-10-04
Approvals Certificates
General Product Approval
last modified: 6/14/2024
6ES72880CD100AA0 Subject to change without notice
7/23/2024
Page 3/3 © Copyright Siemens
